vanity-convert: add Makefile

[hackover2013-badge-firmware.git] / core / pmu / pmu.c

diff --git a/core/pmu/pmu.c b/core/pmu/pmu.c
index d90d228..65f4c72 100644 (file)
--- a/core/pmu/pmu.c
+++ b/core/pmu/pmu.c
@@ -1,5 +1,5 @@
 /**************************************************************************/
 /**************************************************************************/

-/*! 
+/*!

     @file     pmu.c
     @author   K. Townsend (microBuilder.eu)
     @date     22 March 2010
     @file     pmu.c
     @author   K. Townsend (microBuilder.eu)
     @date     22 March 2010


@@ -12,7 +12,7 @@
 
     For examples of how to enter either mode, see the comments for the
     functions pmuSleep(), pmuDeepSleep() and pmuPowerDown().
 
     For examples of how to enter either mode, see the comments for the
     functions pmuSleep(), pmuDeepSleep() and pmuPowerDown().

-       
+

     @section LICENSE
 
     Software License Agreement (BSD License)
     @section LICENSE
 
     Software License Agreement (BSD License)


@@ -50,7 +50,7 @@
 #include "pmu.h"
 
 #ifdef CFG_CHIBI
 #include "pmu.h"
 
 #ifdef CFG_CHIBI

-  #include "drivers/chibi/chb_drvr.h"
+  #include "drivers/rf/chibi/chb_drvr.h"

 #endif
 #define PMU_WDTCLOCKSPEED_HZ 7812
 
 #endif
 #define PMU_WDTCLOCKSPEED_HZ 7812
 


@@ -59,10 +59,11 @@ void pmuRestoreHW(void);
 
 
 /**************************************************************************/
 
 
 /**************************************************************************/

-/*! 
+/*!

     Wakeup interrupt handler
 */
 /**************************************************************************/
     Wakeup interrupt handler
 */
 /**************************************************************************/

+

 void WAKEUP_IRQHandler(void)
 {
   uint32_t regVal;
 void WAKEUP_IRQHandler(void)
 {
   uint32_t regVal;


@@ -104,7 +105,7 @@ void WAKEUP_IRQHandler(void)
 }
 
 /**************************************************************************/
 }
 
 /**************************************************************************/

-/*! 
+/*!

     Setup the clock for the watchdog timer.  The default is 7.8125kHz.
 */
 /**************************************************************************/
     Setup the clock for the watchdog timer.  The default is 7.8125kHz.
 */
 /**************************************************************************/


@@ -115,7 +116,7 @@ static void pmuWDTClockInit (void)
 
   /* Configure watchdog clock */
   /* Freq. = 0.5MHz, div = 64: WDT_OSC = 7.8125kHz  */
 
   /* Configure watchdog clock */
   /* Freq. = 0.5MHz, div = 64: WDT_OSC = 7.8125kHz  */

-  SCB_WDTOSCCTRL = SCB_WDTOSCCTRL_FREQSEL_0_5MHZ | 
+  SCB_WDTOSCCTRL = SCB_WDTOSCCTRL_FREQSEL_0_5MHZ |

                    SCB_WDTOSCCTRL_DIVSEL_DIV64;
 
   // Switch main clock to WDT output
                    SCB_WDTOSCCTRL_DIVSEL_DIV64;
 
   // Switch main clock to WDT output


@@ -129,22 +130,22 @@ static void pmuWDTClockInit (void)
 }
 
 /**************************************************************************/
 }
 
 /**************************************************************************/

-/*! 
+/*!

     @brief Initialises the power management unit
 */
 /**************************************************************************/
 void pmuInit( void )
 {
   /* Enable all clocks, even those turned off at power up. */
     @brief Initialises the power management unit
 */
 /**************************************************************************/
 void pmuInit( void )
 {
   /* Enable all clocks, even those turned off at power up. */

-  SCB_PDRUNCFG &= ~(SCB_PDRUNCFG_WDTOSC_MASK | 
-                    SCB_PDRUNCFG_SYSOSC_MASK | 
+  SCB_PDRUNCFG &= ~(SCB_PDRUNCFG_WDTOSC_MASK |
+                    SCB_PDRUNCFG_SYSOSC_MASK |

                     SCB_PDRUNCFG_ADC_MASK);
 
   return;
 }
 
 /**************************************************************************/
                     SCB_PDRUNCFG_ADC_MASK);
 
   return;
 }
 
 /**************************************************************************/

-/*! 
+/*!

     @brief Puts select peripherals in sleep mode.
 
     This function will put the device into sleep mode.  Most gpio pins
     @brief Puts select peripherals in sleep mode.
 
     This function will put the device into sleep mode.  Most gpio pins


@@ -153,11 +154,11 @@ void pmuInit( void )
 
     @section Example
 
 
     @section Example
 

-    @code 
+    @code

     // Configure wakeup sources before going into sleep/deep-sleep.
     // By default, pin 0.1 is configured as wakeup source (falling edge)
     pmuInit();
     // Configure wakeup sources before going into sleep/deep-sleep.
     // By default, pin 0.1 is configured as wakeup source (falling edge)
     pmuInit();

-  
+

     // Enter sleep mode
     pmuSleep();
     @endcode
     // Enter sleep mode
     pmuSleep();
     @endcode


@@ -171,7 +172,7 @@ void pmuSleep()
 }
 
 /**************************************************************************/
 }
 
 /**************************************************************************/

-/*! 
+/*!

     @brief  Turns off select peripherals and puts the device in deep-sleep
             mode.
 
     @brief  Turns off select peripherals and puts the device in deep-sleep
             mode.
 


@@ -185,8 +186,8 @@ void pmuSleep()
 
     The sleepCtrl parameter is used to indicate which peripherals should
     be put in sleep mode (see the SCB_PDSLEEPCFG register for details).
 
     The sleepCtrl parameter is used to indicate which peripherals should
     be put in sleep mode (see the SCB_PDSLEEPCFG register for details).

-    
-    @param[in]  sleepCtrl  
+
+    @param[in]  sleepCtrl

                 The bits to set in the SCB_PDSLEEPCFG register.  This
                 controls which peripherals will be put in sleep mode.
     @param[in]  wakeupSeconds
                 The bits to set in the SCB_PDSLEEPCFG register.  This
                 controls which peripherals will be put in sleep mode.
     @param[in]  wakeupSeconds


@@ -194,12 +195,12 @@ void pmuSleep()
                 wakeup.  If you do not wish to wakeup after a specific
                 delay, enter a value of 0.
 
                 wakeup.  If you do not wish to wakeup after a specific
                 delay, enter a value of 0.
 

-    @code 
+    @code

     uint32_t pmuRegVal;
     uint32_t pmuRegVal;

-  
+

     // Initialise power management unit
     pmuInit();
     // Initialise power management unit
     pmuInit();

-  
+

     // Put peripherals into sleep mode
     pmuRegVal = SCB_PDSLEEPCFG_IRCOUT_PD |
                 SCB_PDSLEEPCFG_IRC_PD |
     // Put peripherals into sleep mode
     pmuRegVal = SCB_PDSLEEPCFG_IRCOUT_PD |
                 SCB_PDSLEEPCFG_IRC_PD |


@@ -209,7 +210,7 @@ void pmuSleep()
                 SCB_PDSLEEPCFG_SYSOSC_PD |
                 SCB_PDSLEEPCFG_ADC_PD |
                 SCB_PDSLEEPCFG_BOD_PD;
                 SCB_PDSLEEPCFG_SYSOSC_PD |
                 SCB_PDSLEEPCFG_ADC_PD |
                 SCB_PDSLEEPCFG_BOD_PD;

-  
+

     // Enter deep sleep mode (wakeup after 5 seconds)
     // By default, pin 0.1 is configured as wakeup source
     pmuDeepSleep(pmuRegVal, 5);
     // Enter deep sleep mode (wakeup after 5 seconds)
     // By default, pin 0.1 is configured as wakeup source
     pmuDeepSleep(pmuRegVal, 5);


@@ -240,17 +241,17 @@ void pmuDeepSleep(uint32_t sleepCtrl, uint32_t wakeupSeconds)
 
     /* Enable the clock for CT32B0 */
     SCB_SYSAHBCLKCTRL |= (SCB_SYSAHBCLKCTRL_CT32B0);
 
     /* Enable the clock for CT32B0 */
     SCB_SYSAHBCLKCTRL |= (SCB_SYSAHBCLKCTRL_CT32B0);

-  
+

     /* Configure 0.1 as Timer0_32 MAT2 */
     IOCON_PIO0_1 &= ~IOCON_PIO0_1_FUNC_MASK;
     IOCON_PIO0_1 |= IOCON_PIO0_1_FUNC_CT32B0_MAT2;
 
     /* Set appropriate timer delay */
     TMR_TMR32B0MR0 = PMU_WDTCLOCKSPEED_HZ * wakeupSeconds;
     /* Configure 0.1 as Timer0_32 MAT2 */
     IOCON_PIO0_1 &= ~IOCON_PIO0_1_FUNC_MASK;
     IOCON_PIO0_1 |= IOCON_PIO0_1_FUNC_CT32B0_MAT2;
 
     /* Set appropriate timer delay */
     TMR_TMR32B0MR0 = PMU_WDTCLOCKSPEED_HZ * wakeupSeconds;

-  
+

     /* Configure match control register to raise an interrupt and reset on MR0 */
     TMR_TMR32B0MCR |= (TMR_TMR32B0MCR_MR0_INT_ENABLED | TMR_TMR32B0MCR_MR0_RESET_ENABLED);
     /* Configure match control register to raise an interrupt and reset on MR0 */
     TMR_TMR32B0MCR |= (TMR_TMR32B0MCR_MR0_INT_ENABLED | TMR_TMR32B0MCR_MR0_RESET_ENABLED);

-  
+

     /* Configure external match register to set 0.1 high on match */
     TMR_TMR32B0EMR &= ~(0xFF<<4);                   // Clear EMR config bits
     TMR_TMR32B0EMR |= TMR_TMR32B0EMR_EMC2_HIGH;     // Set MAT2 (0.1) high on match
     /* Configure external match register to set 0.1 high on match */
     TMR_TMR32B0EMR &= ~(0xFF<<4);                   // Clear EMR config bits
     TMR_TMR32B0EMR |= TMR_TMR32B0EMR_EMC2_HIGH;     // Set MAT2 (0.1) high on match


@@ -296,11 +297,11 @@ void pmuDeepSleep(uint32_t sleepCtrl, uint32_t wakeupSeconds)
     //NVIC_EnableIRQ(WAKEUP37_IRQn);   // P3.1
     //NVIC_EnableIRQ(WAKEUP38_IRQn);   // P3.2
     //NVIC_EnableIRQ(WAKEUP39_IRQn);   // P3.3
     //NVIC_EnableIRQ(WAKEUP37_IRQn);   // P3.1
     //NVIC_EnableIRQ(WAKEUP38_IRQn);   // P3.2
     //NVIC_EnableIRQ(WAKEUP39_IRQn);   // P3.3

-  
+

     /* Use RISING EDGE for wakeup detection. */
     SCB_STARTAPRP0 |= SCB_STARTAPRP0_APRPIO0_1;
     /* Use RISING EDGE for wakeup detection. */
     SCB_STARTAPRP0 |= SCB_STARTAPRP0_APRPIO0_1;

-  
-    /* Clear all wakeup sources */ 
+
+    /* Clear all wakeup sources */

     SCB_STARTRSRP0CLR = SCB_STARTRSRP0CLR_MASK;
 
     /* Enable Port 0.1 as wakeup source. */
     SCB_STARTRSRP0CLR = SCB_STARTRSRP0CLR_MASK;
 
     /* Enable Port 0.1 as wakeup source. */


@@ -308,7 +309,7 @@ void pmuDeepSleep(uint32_t sleepCtrl, uint32_t wakeupSeconds)
 
     // Reconfigure clock to run from WDTOSC
     pmuWDTClockInit();
 
     // Reconfigure clock to run from WDTOSC
     pmuWDTClockInit();

-  
+

     /* Start the timer */
     TMR_TMR32B0TCR = TMR_TMR32B0TCR_COUNTERENABLE_ENABLED;
   }
     /* Start the timer */
     TMR_TMR32B0TCR = TMR_TMR32B0TCR_COUNTERENABLE_ENABLED;
   }


@@ -318,7 +319,7 @@ void pmuDeepSleep(uint32_t sleepCtrl, uint32_t wakeupSeconds)
 }
 
 /**************************************************************************/
 }
 
 /**************************************************************************/

-/*! 
+/*!

     @brief Puts the device in deep power-down mode.
 
     This function will configure the PMU control register and enter
     @brief Puts the device in deep power-down mode.
 
     This function will configure the PMU control register and enter


@@ -334,7 +335,7 @@ void pmuDeepSleep(uint32_t sleepCtrl, uint32_t wakeupSeconds)
 
     @section Example
 
 
     @section Example
 

-    @code 
+    @code

     #include "core/cpu/cpu.h"
     #include "core/pmu/pmu.h"
 
     #include "core/cpu/cpu.h"
     #include "core/pmu/pmu.h"
 


@@ -366,7 +367,7 @@ void pmuPowerDown( void )
     /* Check sleep and deep power down bits. If sleep and/or
        deep power down mode are entered, clear the PCON bits. */
     regVal = PMU_PMUCTRL;
     /* Check sleep and deep power down bits. If sleep and/or
        deep power down mode are entered, clear the PCON bits. */
     regVal = PMU_PMUCTRL;

-    regVal |= ((0x1<<8) | 
+    regVal |= ((0x1<<8) |

                (PMU_PMUCTRL_DPDEN_SLEEP) |
                (PMU_PMUCTRL_DPDFLAG));
     PMU_PMUCTRL = regVal;
                (PMU_PMUCTRL_DPDEN_SLEEP) |
                (PMU_PMUCTRL_DPDFLAG));
     PMU_PMUCTRL = regVal;


@@ -392,7 +393,7 @@ void pmuPowerDown( void )
 }
 
 /**************************************************************************/
 }
 
 /**************************************************************************/

-/*! 
+/*!

     @brief  Configures parts and system peripherals to use lower power
             before entering sleep mode
 */
     @brief  Configures parts and system peripherals to use lower power
             before entering sleep mode
 */


@@ -405,7 +406,7 @@ void pmuSetupHW(void)
 }
 
 /**************************************************************************/
 }
 
 /**************************************************************************/

-/*! 
+/*!

     @brief  Restores parts and system peripherals to an appropriate
             state after waking up from deep-sleep mode
 */
     @brief  Restores parts and system peripherals to an appropriate
             state after waking up from deep-sleep mode
 */