Salz' level #1

[hackover2013-badge-firmware.git] / r0ketports.h

diff --git a/r0ketports.h b/r0ketports.h
index 8ef517a..464e5c2 100644 (file)
--- a/r0ketports.h
+++ b/r0ketports.h
@@ -1,7 +1,7 @@
 #ifndef INCLUDED_R0KET_PORTS_H
 #define INCLUDED_R0KET_PORTS_H
 
-#define HW_IS_PROTOTYPE 1
+#ifdef R0KET
 
 // LED
 #define RB_LED0                            0,11
@@ -21,35 +21,6 @@
 
 
 // Buttons
-#if HW_IS_PROTOTYPE
-
-// TODO
-// FIXME:
-// order of buttons is without sense!
-#define RB_BTN0                            1,5
-#define RB_BTN0_IO                 IOCON_PIO0_1
-
-#define RB_BTN1                            1,6
-#define RB_BTN1_IO                 IOCON_PIO2_9
-
-#define RB_BTN2                            3,2
-#define RB_BTN2_IO                 IOCON_PIO2_6
-
-#define RB_BTN3                            3,3
-#define RB_BTN3_IO                 IOCON_PIO3_3
-
-#define RB_BTN4                            2,7
-#define RB_BTN4_IO                 IOCON_PIO2_7
-
-// A and B buttons on the hackover badge only
-#define RB_BTN_A            1,11
-#define RB_BTN_A_IO         IOCON_PIO1_11
-
-#define RB_BTN_B            1,4
-#define RB_BTN_B_IO         IOCON_PIO1_4
-
-#else
-
 // TODO: XXX
 // use alternate buttons for the board
 
@@ -68,25 +39,11 @@
 #define RB_BTN4                            2,7
 #define RB_BTN4_IO                 IOCON_PIO2_7
 
-
-#endif
-
-
-// LCD
-#if HW_IS_PROTOTYPE
-
-// backlight pin is used     in another way for prototype
-#define RB_LCD_CS              1,0
-#define RB_LCD_RST                 1,1
-
-#else
-
 #define RB_LCD_BL                  1,9
 #define RB_LCD_CS                  2,1
 #define RB_LCD_RST             2,2
 
-#endif
-
+#define RB_SPI_CS_DF       2,0
 
 // I2C
 #define RB_I2C_SCL                 0,4
@@ -101,8 +58,6 @@
 
 #define RB_SPI_SCK                 2,11
 
-#define RB_SPI_CS_DF       2,0
-
 #define RB_SPI_SS0                 2,5
 
 #define RB_SPI_SS1                 2,4
@@ -148,27 +103,11 @@
 #define RB_HB5                     1,2
 #define RB_HB5_IO                  IOCON_PIO1_2
 
-// Funk
-#if HW_IS_PROTOTYPE
-
-#define RB_NRF_CE                  2,10
-#define RB_NRF_CE_IO           IOCON_PIO2_10
-#define RB_SPI_NRF_CS          2,9
-#define RB_SPI_NRF_CS_IO       IOCON_PIO2_9
-
-// TODO: this pin is new. support must be added for configuration in main.c
-#define RB_SPI_NRF_IRQ         2,2
-#define RB_SPI_NRF_IRQ_IO      IOCON_PIO2_2
-
-#else
-
 #define RB_NRF_CE                  1,5
 #define RB_NRF_CE_IO           IOCON_PIO1_5
 #define RB_SPI_NRF_CS          1,10
 #define RB_SPI_NRF_CS_IO       IOCON_PIO1_10
 
-#endif
-
 // Misc
 #define RB_BUSINT                  3,0
 #define RB_BUSINT_IO           IOCON_PIO3_0
@@ -189,3 +128,5 @@
 
 #endif
 
+#endif
+