-v0.9.8 - Ongoing
+v1.0.0 - Ongoing
================
+- *** Moved '/drivers/chibi' to '/drivers/rf/chibi' ***
+- *** Moved '/drivers/sensors/pn532' to '/drivers/rf/pn532' ***
+- *** Renamed '/drivers/spiflash' to '/drivers/storage/spiflash' ***
+- *** Renamed '/drivers/eeprom' to '/drivers/storage/eeprom' ***
+- *** Renamed '/drivers/lcd' to '/drivers/display' ***
+- Moved all color conversion and manipulation functions
+ to '/drivers/displays/tft/colors.c', and added a
+ few new functions: colorsDim(), etc.
+- Added code to render antialiased fonts, based on
+ lookup tables (fast) or alpha-blending (mixed color
+ backgrounds). Support for AA2 (2-bit) and AA4
+ (4-bit) anti-aliased fonts included. Alpha-blending
+ only possible on displays where pixels can be read
+ back.
+- Added drawGradient() to drawing.c
+- Removed height parameter from drawButton. It's now
+ calculated based on the font height, and centered.
+- Added bell to CLI when backspace is pressed beyond
+ the starting position (cosmetic, but still useful)
+- Removed dependency on /core/libc files in Crossworks
+ when redirecting printf (added printf replacement
+ to sysinit.c instead)
+- Added basic AS1115 driver for segment displays
+- Added driver for HX8340-B based LCDs
+- Added flag to projectconfig.h to disable the default
+ GPIO IRQ Handler functions in code/gpio/gpio.c (in
+ case you want to make your own ISR elsewhere)
+- Added driver for Samsung VFD displays from Adafruit
+- Added ADC average sampling option to projectconfig.h.
+ This allows you to take several readings from the
+ ADC and return the average. Helps reduces peaks and
+ valleys in the ADC due to noisen but at the expense
+ of slower reads.
+ See: "tools/validation/adctest" for more info
+- Added I2C driver for PN532
+- Updated and added PN532 examples to
+ /tools/examples/sensors/PN532
+- updated touchscreen.h to be a bit clearer during
+ calibration, though it can still be much better
+ organised
+- Had to add "__asm volatile("nop");" after pin writes
+ in the ILI9328 driver since some LCDs couldn't
+ keep up with the high-speed writes with bit-banding
+- Fixed I2C clock duty cycle registers
+- Changed I2C buffer size from 32 to 64 bytes (i2c.h)
+- Added CFG_BRD_LPC1343_OLIMEX_P to board selection
+ in projectconfig.h (courtesy PHK)
+- Added SSD1331_COLORORDER_RGB flag to SSD1331.h to
+ select between RGB and BGR color order
+- Added 128x32 support to ssd1306.c and rewrote
+ initialize sequence for 128x32 and 128x64 displays
- Added driver for Sharp Memory Display
/drivers/lcd/bitmap/sharpmem
+- Added SPI Flash example
+ /tools/examples/spiflash/*
+- Added write function to SPI Flash driver
+ /drivers/spiflash/*
+- Added CFG_BRD_LPC1343_REFDESIGN_MINIMAL as a board
+ option in projectconfig.h. Tries to keep the flash
+ use as small as possible by initialising less
+ peripherals in systemInit().
+- Changed CodeLite project files to support real
+ debugging with a Segger J-Link and GDB Server.
+- Fixed issue with USB CDC instantiation for
+ FreeBSD (courtesy PHK)
+- Added experimental SSD1351 OLED driver to
+ /drivers/lcd/tft/hw
v0.9.5 - 3 August 2011
======================
projects / hackover2013-badge-firmware.git / blobdiff