X-Git-Url: http://git.rohieb.name/hackover2013-badge-firmware.git/blobdiff_plain/6dc0e5dfc2d00d5f2fd0cf684c87cf889b9d4ae9..72bd7e9482f3d8d8c08eac7cf5d8f466eff46aac:/drivers/displays/bitmap/ssd1306/ssd1306.c

diff --git a/drivers/displays/bitmap/ssd1306/ssd1306.c b/drivers/displays/bitmap/ssd1306/ssd1306.c
index f7d55b0..f8e4ee4 100644
--- a/drivers/displays/bitmap/ssd1306/ssd1306.c
+++ b/drivers/displays/bitmap/ssd1306/ssd1306.c
@@ -351,16 +351,6 @@ void ssd1306Init(uint8_t vccstate)
 
   // I2C Initialisation
   #if defined SSD1306_BUS_I2C
-    // Set all pins to output
-    gpioSetDir(SSD1306_RST_PORT, SSD1306_RST_PORT, gpioDirection_Output);
-
-    // Reset the LCD
-    gpioSetValue(SSD1306_RST_PORT, SSD1306_RST_PIN, 1);
-    DELAY(1);
-    gpioSetValue(SSD1306_RST_PORT, SSD1306_RST_PIN, 0);
-    DELAY(10);
-    gpioSetValue(SSD1306_RST_PORT, SSD1306_RST_PIN, 1);
-
     #if defined SSD1306_128_32
       // Init sequence taken from datasheet for UG-2832HSWEG04 (128x32 OLED module)
       ssd1306SendCommand(SSD1306_DISPLAYOFF);                // 0xAE