+++ /dev/null
-#ifndef __AR531X_H
-#define __AR531X_H
-
-#include <linux/version.h>
-#include <asm/cpu-info.h>
-#include <ar531x_platform.h>
-#include <ar5312/ar5312.h>
-#include <ar5315/ar5315.h>
-
-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24))
-extern void (*board_time_init)(void);
-#endif
-
-/*
- * Atheros CPUs before the AR2315 are using MIPS 4Kc core, later designs are
- * using MIPS 4KEc R2 core. This makes it easy to determine the board at runtime.
- */
-#ifdef CONFIG_ATHEROS_AR5312
-#define DO_AR5312(...) \
- if (current_cpu_data.cputype != CPU_4KEC) { \
- __VA_ARGS__ \
- }
-#else
-#define DO_AR5312(...)
-#endif
-#ifdef CONFIG_ATHEROS_AR5315
-#define DO_AR5315(...) \
- if (current_cpu_data.cputype == CPU_4KEC) { \
- __VA_ARGS__ \
- }
-#else
-#define DO_AR5315(...)
-#endif
-
-#define AR531X_MISC_IRQ_BASE 0x20
-#define AR531X_GPIO_IRQ_BASE 0x30
-
-/* Software's idea of interrupts handled by "CPU Interrupt Controller" */
-#define AR531X_IRQ_NONE MIPS_CPU_IRQ_BASE+0
-#define AR531X_IRQ_CPU_CLOCK MIPS_CPU_IRQ_BASE+7 /* C0_CAUSE: 0x8000 */
-
-/* Miscellaneous interrupts, which share IP6 */
-#define AR531X_MISC_IRQ_NONE AR531X_MISC_IRQ_BASE+0
-#define AR531X_MISC_IRQ_TIMER AR531X_MISC_IRQ_BASE+1
-#define AR531X_MISC_IRQ_AHB_PROC AR531X_MISC_IRQ_BASE+2
-#define AR531X_MISC_IRQ_AHB_DMA AR531X_MISC_IRQ_BASE+3
-#define AR531X_MISC_IRQ_GPIO AR531X_MISC_IRQ_BASE+4
-#define AR531X_MISC_IRQ_UART0 AR531X_MISC_IRQ_BASE+5
-#define AR531X_MISC_IRQ_UART0_DMA AR531X_MISC_IRQ_BASE+6
-#define AR531X_MISC_IRQ_WATCHDOG AR531X_MISC_IRQ_BASE+7
-#define AR531X_MISC_IRQ_LOCAL AR531X_MISC_IRQ_BASE+8
-#define AR531X_MISC_IRQ_SPI AR531X_MISC_IRQ_BASE+9
-#define AR531X_MISC_IRQ_COUNT 10
-
-/* GPIO Interrupts [0..7], share AR531X_MISC_IRQ_GPIO */
-#define AR531X_GPIO_IRQ_NONE AR531X_GPIO_IRQ_BASE+0
-#define AR531X_GPIO_IRQ(n) AR531X_GPIO_IRQ_BASE+(n)+1
-#define AR531X_GPIO_IRQ_COUNT 22
-
-#define sysRegRead(phys) \
- (*(volatile u32 *)KSEG1ADDR(phys))
-
-#define sysRegWrite(phys, val) \
- ((*(volatile u32 *)KSEG1ADDR(phys)) = (val))
-
-/*
- * This is board-specific data that is stored in a "fixed" location in flash.
- * It is shared across operating systems, so it should not be changed lightly.
- * The main reason we need it is in order to extract the ethernet MAC
- * address(es).
- */
-struct ar531x_boarddata {
- u32 magic; /* board data is valid */
-#define AR531X_BD_MAGIC 0x35333131 /* "5311", for all 531x platforms */
- u16 cksum; /* checksum (starting with BD_REV 2) */
- u16 rev; /* revision of this struct */
-#define BD_REV 4
- char boardName[64]; /* Name of board */
- u16 major; /* Board major number */
- u16 minor; /* Board minor number */
- u32 config; /* Board configuration */
-#define BD_ENET0 0x00000001 /* ENET0 is stuffed */
-#define BD_ENET1 0x00000002 /* ENET1 is stuffed */
-#define BD_UART1 0x00000004 /* UART1 is stuffed */
-#define BD_UART0 0x00000008 /* UART0 is stuffed (dma) */
-#define BD_RSTFACTORY 0x00000010 /* Reset factory defaults stuffed */
-#define BD_SYSLED 0x00000020 /* System LED stuffed */
-#define BD_EXTUARTCLK 0x00000040 /* External UART clock */
-#define BD_CPUFREQ 0x00000080 /* cpu freq is valid in nvram */
-#define BD_SYSFREQ 0x00000100 /* sys freq is set in nvram */
-#define BD_WLAN0 0x00000200 /* Enable WLAN0 */
-#define BD_MEMCAP 0x00000400 /* CAP SDRAM @ memCap for testing */
-#define BD_DISWATCHDOG 0x00000800 /* disable system watchdog */
-#define BD_WLAN1 0x00001000 /* Enable WLAN1 (ar5212) */
-#define BD_ISCASPER 0x00002000 /* FLAG for AR2312 */
-#define BD_WLAN0_2G_EN 0x00004000 /* FLAG for radio0_2G */
-#define BD_WLAN0_5G_EN 0x00008000 /* FLAG for radio0_2G */
-#define BD_WLAN1_2G_EN 0x00020000 /* FLAG for radio0_2G */
-#define BD_WLAN1_5G_EN 0x00040000 /* FLAG for radio0_2G */
- u16 resetConfigGpio; /* Reset factory GPIO pin */
- u16 sysLedGpio; /* System LED GPIO pin */
-
- u32 cpuFreq; /* CPU core frequency in Hz */
- u32 sysFreq; /* System frequency in Hz */
- u32 cntFreq; /* Calculated C0_COUNT frequency */
-
- u8 wlan0Mac[6];
- u8 enet0Mac[6];
- u8 enet1Mac[6];
-
- u16 pciId; /* Pseudo PCIID for common code */
- u16 memCap; /* cap bank1 in MB */
-
- /* version 3 */
- u8 wlan1Mac[6]; /* (ar5212) */
-};
-
-#define BOARD_CONFIG_BUFSZ 0x1000
-
-extern char *board_config, *radio_config;
-extern void serial_setup(unsigned long mapbase, unsigned int uartclk);
-extern int ar531x_find_config(char *flash_limit);
-
-extern void ar5312_prom_init(void);
-extern void ar5312_misc_intr_init(int irq_base);
-extern void ar5312_plat_setup(void);
-extern asmlinkage void ar5312_irq_dispatch(void);
-
-extern void ar5315_prom_init(void);
-extern void ar5315_misc_intr_init(int irq_base);
-extern void ar5315_plat_setup(void);
-extern asmlinkage void ar5315_irq_dispatch(void);
-extern void ar5315_pci_irq(int irq);
-static inline u32 sysRegMask(u32 phys, u32 mask, u32 value)
-{
- u32 reg;
-
- reg = sysRegRead(phys);
- reg &= ~mask;
- reg |= value & mask;
- sysRegWrite(phys, reg);
- reg = sysRegRead(phys); /* flush write to the hardware */
-
- return reg;
-}
-
-#define AR531X_NUM_GPIO 8
-
-#endif
projects / openwrt.git / blobdiff