projects / openwrt.git / blobdiff
? search:
summary | shortlog | log | commit | commitdiff | tree
raw | inline | side by side
add Askey RT210W support (patch from #6380)
[openwrt.git] / package / broadcom-diag / src / diag.c
diff --git a/package/broadcom-diag/src/diag.c b/package/broadcom-diag/src/diag.c
index 341880a..ec1870f 100644 (file)
--- a/package/broadcom-diag/src/diag.c
+++ b/package/broadcom-diag/src/diag.c
@@ -19,7 +19,6 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
  *
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
  *
- * $Id$
  */
 #include <linux/module.h>
 #include <linux/pci.h>
  */
 #include <linux/module.h>
 #include <linux/pci.h>
@@ -55,14 +54,18 @@ module_param(gpiomask, int, 0644);
 enum {
        /* Linksys */
        WAP54GV1,
 enum {
        /* Linksys */
        WAP54GV1,
+       WAP54GV2,
        WAP54GV3,
        WRT54GV1,
        WRT54G,
        WRTSL54GS,
        WRT54G3G,
        WAP54GV3,
        WRT54GV1,
        WRT54G,
        WRTSL54GS,
        WRT54G3G,
+       WRT160N,
+       WRT300NV11,
        WRT350N,
        WRT600N,
        WRT600NV11,
        WRT350N,
        WRT600N,
        WRT600NV11,
+       WRT610N,
 
        /* ASUS */
        WLHDD,
 
        /* ASUS */
        WLHDD,
@@ -123,11 +126,15 @@ enum {
 
        /* D-Link */
        DIR130,
 
        /* D-Link */
        DIR130,
+       DIR320,
        DIR330,
        DWL3150,
 
        /* Sitecom */
        WL105B,
        DIR330,
        DWL3150,
 
        /* Sitecom */
        WL105B,
+
+       /* Askey */
+       RT210W,
 };
 
 static void __init bcm4780_init(void) {
 };
 
 static void __init bcm4780_init(void) {
@@ -167,6 +174,16 @@ static struct platform_t __initdata platforms[] = {
                        { .name = "wlan",       .gpio = 1 << 4 },
                },
        },
                        { .name = "wlan",       .gpio = 1 << 4 },
                },
        },
+       [WAP54GV2] = {
+               .name           = "Linksys WAP54G V2",
+               .buttons        = {
+                       { .name = "reset",      .gpio = 1 << 0 },
+               },
+               .leds           = {
+                       { .name = "wlan",       .gpio = 1 << 5, .polarity = REVERSE },
+                       /* GPIO 6 is b44 (eth0, LAN) PHY power */
+               },
+       },
        [WAP54GV3] = {
                .name           = "Linksys WAP54G V3",
                .buttons        = {
        [WAP54GV3] = {
                .name           = "Linksys WAP54G V3",
                .buttons        = {
@@ -230,6 +247,31 @@ static struct platform_t __initdata platforms[] = {
                        { .name = "3g_blink",   .gpio = 1 << 5, .polarity = NORMAL },
                },
        },
                        { .name = "3g_blink",   .gpio = 1 << 5, .polarity = NORMAL },
                },
        },
+       [WRT160N] = {
+               .name           = "Linksys WRT160N",
+               .buttons        = {
+                       { .name = "reset",      .gpio = 1 << 6 },
+                       { .name = "ses",        .gpio = 1 << 4 },
+               },
+               .leds           = {
+                       { .name = "power",      .gpio = 1 << 1, .polarity = NORMAL },
+                       { .name = "ses_blue",   .gpio = 1 << 5, .polarity = REVERSE },
+                       { .name = "ses_orange", .gpio = 1 << 3, .polarity = REVERSE },
+               },
+       },
+       [WRT300NV11] = {
+               .name           = "Linksys WRT300N V1.1",
+               .buttons        = {
+                       { .name = "reset",     .gpio = 1 << 6 }, // "Reset" on back panel
+                       { .name = "ses",       .gpio = 1 << 4 }, // "Reserved" on top panel
+               },
+               .leds           = {
+                       { .name = "power",     .gpio = 1 << 1, .polarity = NORMAL  }, // "Power"
+                       { .name = "ses_amber", .gpio = 1 << 3, .polarity = REVERSE }, // "Security" Amber
+                       { .name = "ses_green", .gpio = 1 << 5, .polarity = REVERSE }, // "Security" Green
+               },
+               .platform_init = bcm57xx_init,
+       },
        [WRT350N] = {
                .name           = "Linksys WRT350N",
                .buttons        = {
        [WRT350N] = {
                .name           = "Linksys WRT350N",
                .buttons        = {
@@ -277,6 +319,19 @@ static struct platform_t __initdata platforms[] = {
                },
                .platform_init = bcm57xx_init,
        },
                },
                .platform_init = bcm57xx_init,
        },
+       [WRT610N] = {
+               .name           = "Linksys WRT610N",
+               .buttons        = {
+                       { .name = "reset",      .gpio = 1 << 6 },
+                       { .name = "ses",        .gpio = 1 << 8 },
+               },
+               .leds           = {
+                       { .name = "power",      .gpio = 1 << 1,  .polarity = NORMAL }, // Power LED
+                       { .name = "usb",        .gpio = 1 << 0,  .polarity = REVERSE }, // USB LED
+                       { .name = "ses_amber",  .gpio = 1 << 3,  .polarity = REVERSE }, // WiFi protected setup LED amber
+                       { .name = "ses_blue",   .gpio = 1 << 9,  .polarity = REVERSE }, // WiFi protected setup LED blue
+               },
+       },
        /* Asus */
        [WLHDD] = {
                .name           = "ASUS WL-HDD",
        /* Asus */
        [WLHDD] = {
                .name           = "ASUS WL-HDD",
@@ -708,6 +763,20 @@ static struct platform_t __initdata platforms[] = {
                        { .name = "blue",       .gpio = 1 << 6},
                },
        },
                        { .name = "blue",       .gpio = 1 << 6},
                },
        },
+       [DIR320] = {
+               .name     = "D-Link DIR-320",
+               .buttons        = {
+                       { .name = "reserved",   .gpio = 1 << 6},
+                       { .name = "reset",      .gpio = 1 << 7},
+               },
+               .leds      = {
+                       { .name = "wlan",       .gpio = 1 << 0, .polarity = NORMAL },
+                       { .name = "diag",       .gpio = 1 << 1, .polarity = NORMAL }, /* "status led */
+                       { .name = "red",        .gpio = 1 << 3, .polarity = REVERSE },
+                       { .name = "blue",       .gpio = 1 << 4, .polarity = REVERSE },
+                       { .name = "usb",        .gpio = 1 << 5, .polarity = NORMAL },
+               },
+       },
        [DIR330] = {
                .name     = "D-Link DIR-330",
                .buttons        = {
        [DIR330] = {
                .name     = "D-Link DIR-330",
                .buttons        = {
@@ -741,6 +810,21 @@ static struct platform_t __initdata platforms[] = {
                        { .name = "power",      .gpio = 1 << 3},
                },
        },
                        { .name = "power",      .gpio = 1 << 3},
                },
        },
+       /* Askey (and clones) */
+       [RT210W] = {
+               .name           = "Askey RT210W",
+               .buttons        = {
+                       /* Power button is hard-wired to hardware reset */
+                       /* but is also connected to GPIO 7 (probably for bootloader recovery)  */
+                       { .name = "power",      .gpio = 1 << 7},
+               },
+               .leds           = {
+                       /* These were verified and named based on Belkin F5D4230-4 v1112 */
+                       { .name = "connected",  .gpio = 1 << 0, .polarity = REVERSE },
+                       { .name = "wlan",       .gpio = 1 << 3, .polarity = REVERSE },
+                       { .name = "power",      .gpio = 1 << 5, .polarity = REVERSE },
+               },
+       },
 };
 
 static struct platform_t __init *platform_detect(void)
 };
 
 static struct platform_t __init *platform_detect(void)
@@ -760,6 +844,12 @@ static struct platform_t __init *platform_detect(void)
                        return &platforms[DIR330];
        }
 
                        return &platforms[DIR330];
        }
 
+       /* Based on "wsc_modelname */
+       if ((buf = nvram_get("wsc_modelname"))) {
+               if (!strcmp(buf, "WRT610N"))
+                       return &platforms[WRT610N];
+       }
+
        /* Based on "model_no" */
        if ((buf = nvram_get("model_no"))) {
                if (startswith(buf,"WL700")) /* WL700* */
        /* Based on "model_no" */
        if ((buf = nvram_get("model_no"))) {
                if (startswith(buf,"WL700")) /* WL700* */
@@ -782,6 +872,8 @@ static struct platform_t __init *platform_detect(void)
        if ((buf = nvram_get("ModelId"))) {
                if (!strcmp(buf, "WR850GP"))
                        return &platforms[WR850GP];
        if ((buf = nvram_get("ModelId"))) {
                if (!strcmp(buf, "WR850GP"))
                        return &platforms[WR850GP];
+               if (!strcmp(buf, "WR850G"))
+                       return &platforms[WR850GV2V3];
                if (!strcmp(buf, "WX-5565") && !strcmp(getvar("boardtype"),"bcm94710ap"))
                        return &platforms[TM2300]; /* Dell TrueMobile 2300 */
                if (startswith(buf,"WE800G")) /* WE800G* */
                if (!strcmp(buf, "WX-5565") && !strcmp(getvar("boardtype"),"bcm94710ap"))
                        return &platforms[TM2300]; /* Dell TrueMobile 2300 */
                if (startswith(buf,"WE800G")) /* WE800G* */
@@ -826,6 +918,9 @@ static struct platform_t __init *platform_detect(void)
        if (startswith(getvar("pmon_ver"), "CFE")) {
                /* CFE based - newer hardware */
                if (!strcmp(boardnum, "42")) { /* Linksys */
        if (startswith(getvar("pmon_ver"), "CFE")) {
                /* CFE based - newer hardware */
                if (!strcmp(boardnum, "42")) { /* Linksys */
+                       if (!strcmp(boardtype, "0x478") && !strcmp(getvar("boot_hw_model"), "WRT300N") && !strcmp(getvar("boot_hw_ver"), "1.1"))
+                               return &platforms[WRT300NV11];
+
                        if (!strcmp(boardtype, "0x478") && !strcmp(getvar("cardbus"), "1"))
                                return &platforms[WRT350N];
 
                        if (!strcmp(boardtype, "0x478") && !strcmp(getvar("cardbus"), "1"))
                                return &platforms[WRT350N];
 
@@ -835,9 +930,14 @@ static struct platform_t __init *platform_detect(void)
                        if (!strcmp(getvar("et1phyaddr"),"5") && !strcmp(getvar("et1mdcport"), "1"))
                                return &platforms[WRTSL54GS];
 
                        if (!strcmp(getvar("et1phyaddr"),"5") && !strcmp(getvar("et1mdcport"), "1"))
                                return &platforms[WRTSL54GS];
 
+                       if (!strcmp(boardtype, "0x0472"))
+                               return &platforms[WRT160N];
+
                        /* default to WRT54G */
                        return &platforms[WRT54G];
                }
                        /* default to WRT54G */
                        return &platforms[WRT54G];
                }
+               if (!strcmp(boardnum, "1024") && !strcmp(boardtype, "0x0446"))
+                       return &platforms[WAP54GV2];
 
                if (!strcmp(boardnum, "44") || !strcmp(boardnum, "44\r")) {
                        if (!strcmp(boardtype,"0x0101") || !strcmp(boardtype, "0x0101\r"))
 
                if (!strcmp(boardnum, "44") || !strcmp(boardnum, "44\r")) {
                        if (!strcmp(boardtype,"0x0101") || !strcmp(boardtype, "0x0101\r"))
@@ -861,6 +961,10 @@ static struct platform_t __init *platform_detect(void)
                if (!strcmp(getvar("boardtype"), "0x0101") && !strcmp(getvar("boardrev"), "0x10")) /* SE505V2 With Modified CFE */
                        return &platforms[SE505V2];
 
                if (!strcmp(getvar("boardtype"), "0x0101") && !strcmp(getvar("boardrev"), "0x10")) /* SE505V2 With Modified CFE */
                        return &platforms[SE505V2];
 
+               if (!strcmp(boardtype, "0x048e") && !strcmp(getvar("boardrev"),"0x35") &&
+                               !strcmp(getvar("boardflags"), "0x750")) /* D-Link DIR-320 */
+                       return &platforms[DIR320];
+
        } else { /* PMON based - old stuff */
                if ((simple_strtoul(getvar("GemtekPmonVer"), NULL, 0) == 9) &&
                        (simple_strtoul(getvar("et0phyaddr"), NULL, 0) == 30)) {
        } else { /* PMON based - old stuff */
                if ((simple_strtoul(getvar("GemtekPmonVer"), NULL, 0) == 9) &&
                        (simple_strtoul(getvar("et0phyaddr"), NULL, 0) == 30)) {
@@ -890,6 +994,18 @@ static struct platform_t __init *platform_detect(void)
                /* unknown asus stuff, probably bcm4702 */
                if (startswith(boardnum, "asusX"))
                        return &platforms[ASUS_4702];
                /* unknown asus stuff, probably bcm4702 */
                if (startswith(boardnum, "asusX"))
                        return &platforms[ASUS_4702];
+
+               /* bcm4702 based Askey RT210W clones, Including:
+                * Askey RT210W (duh?)
+                * Siemens SE505v1
+                * Belkin F5D7230-4 before version v1444 (MiniPCI slot, not integrated)
+                */
+               if (!strcmp(boardtype,"bcm94710r4")
+                && !strcmp(boardnum ,"100")
+                && !strcmp(getvar("pmon_ver"),"v1.03.12.bk")
+                  ){
+                       return &platforms[RT210W];
+               }
        }
 
        if (buf || !strcmp(boardnum, "00")) {/* probably buffalo */
        }
 
        if (buf || !strcmp(boardnum, "00")) {/* probably buffalo */
Personal OpenWRT clone
This page took 0.025918 seconds and 4 git commands to generate.