ar71xx: setup platform data for ath9k on the TL-WR741ND, Bullet M and on the WNDR3700...

[openwrt.git] / target / linux / brcm-2.4 / base-files / etc / init.d / netconfig

diff --git a/target/linux/brcm-2.4/base-files/etc/init.d/netconfig b/target/linux/brcm-2.4/base-files/etc/init.d/netconfig
index a53209e..b5d900a 100755 (executable)
--- a/target/linux/brcm-2.4/base-files/etc/init.d/netconfig
+++ b/target/linux/brcm-2.4/base-files/etc/init.d/netconfig
@@ -4,7 +4,41 @@
 START=05
 
 start() {
-       [ -e /etc/config/network ] && exit 0
+       [ -e /etc/config/network ] && {
+               local batch
+
+               config_cb() {
+                       case "$1" in
+                       switch)
+                               option_cb() {
+                                       case "$1" in
+                                       vlan[0-9]|vlan1[0-5])
+                                               local id="${1#vlan}"
+                                               append batch "delete network.eth0.${1}${N}"
+                                               append batch "set network.eth0_${n}=switch_vlan${N}"
+                                               append batch "set network.eth0_${n}.device=eth0${N}"
+                                               append batch "set network.eth0_${n}.vlan=${id}${N}"
+                                               append batch "set network.eth0_${n}.ports='${2}'${N}"
+                                       ;;
+                                       esac
+                               }
+                       ;;
+                       switch_vlan)
+                               option_cb() { :; }
+                               batch=""
+                       ;;
+                       esac
+               }
+
+               config_load network
+
+               [ -n "$batch" ] && {
+                       logger -t netconfig "migrating switch config to new format ..."
+                       echo "$batch${N}commit network" | uci batch
+               }
+
+               exit 0
+       }
 
        mkdir -p /etc/config
 
@@ -20,6 +54,16 @@ start() {
                if (c[name] != "") print "      option " cfgname "      \"" c[name] "\""
        }
 
+       function vlan(id, name) {
+               if (c[name] != "") {
+                       print "config switch_vlan eth0_" id
+                       print " option device   \"eth0\""
+                       print " option vlan     " id
+                       print " option ports    \"" c[name] "\""
+                       print ""
+               }
+       }
+
        function macinc(mac, maca, i, result) {
                split(mac, maca, ":")
                for (i = 1; i <= 6; i++) maca[i] = "0x" maca[i]
@@ -113,6 +157,13 @@ start() {
                                }
                        }
                }
+               # Buffalo WBR-B11 and Buffalo WBR-G54
+               if (nvram["boardtype"] == "bcm94710ap") {
+                       c["vlan0ports"] = "0 1 2 3 4 5u"
+                       c["vlan1ports"] = ""
+                       c["lan_ifname"] = "eth0"
+                       c["wan_ifname"] = "eth1"
+               }
                if (nvram["boardtype"] == "0x478") {
                        # generic broadcom 4785 processor with 5397 switch?
                        c["vlan0ports"] = "1 2 3 4 8*"
@@ -158,10 +209,10 @@ start() {
                if (c["vlan0ports"] || c["vlan1ports"]) {
                        print "#### VLAN configuration "
                        print "config switch eth0"
-                       p("vlan0", "vlan0ports")
-                       p("vlan1", "vlan1ports")
-                       print ""
-                       print ""
+                       print " option enable   1"
+                       print ""                
+                       vlan(0, "vlan0ports")
+                       vlan(1, "vlan1ports")
                }
                print "#### Loopback configuration"
                print "config interface loopback"