-#
-# Copyright (C) 2006 OpenWrt.org
+#
+# Copyright (C) 2006-2009 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
-# $Id$
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/kernel.mk
PKG_NAME:=madwifi
-PKG_REV:=3053
+
+PKG_REV:=3314
PKG_VERSION:=r$(PKG_REV)
-PKG_BRANCH:=madwifi-dfs
-PKG_RELEASE:=1
+PKG_RELEASE:=5
PKG_SOURCE_PROTO:=svn
PKG_SOURCE_VERSION:=$(PKG_REV)
-PKG_SOURCE_SUBDIR:=$(if $(PKG_BRANCH),$(PKG_BRANCH),madwifi)-$(PKG_VERSION)
-PKG_SOURCE_URL:=http://svn.madwifi.org/madwifi/$(if $(PKG_BRANCH),branches/$(PKG_BRANCH),trunk)
+PKG_SOURCE_SUBDIR:=$(if $(PKG_BRANCH),$(PKG_BRANCH),madwifi-trunk)-$(PKG_VERSION)
+PKG_SOURCE_URL:=http://madwifi-project.org/svn/madwifi/$(if $(PKG_BRANCH),branches/$(PKG_BRANCH),trunk)
PKG_SOURCE:=$(PKG_SOURCE_SUBDIR).tar.gz
-PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/$(PKG_BRANCH)-$(PKG_VERSION)
+PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/$(if $(PKG_BRANCH),$(PKG_BRANCH),madwifi-trunk)-$(PKG_VERSION)
+
+HAL_VERSION:=20090508
+HAL_FILE:=ath_hal-$(HAL_VERSION).tgz
+HAL_MD5SUM:=4ab7ae8bdb96c0be388c98bf8f92d5ca
+
+PKG_BUILD_DEPENDS:=wprobe
include $(INCLUDE_DIR)/package.mk
-ifeq ($(ARCH),mips)
- HAL_TARGET:=mips-be-elf
+ifdef CONFIG_MADWIFI_COMPRESSION
+ COMPRESSION:=1
+else
+ COMPRESSION:=0
+endif
+
+define Download/hal
+ FILE:=$(HAL_FILE)
+ URL:=http://mirror2.openwrt.org/sources
+ MD5SUM:=$(HAL_MD5SUM)
+endef
+$(eval $(call Download,hal))
+
+
+ifneq ($(CONFIG_TARGET_atheros),)
+ BUS:=AHB
+else
+ ifneq ($(CONFIG_PCI_SUPPORT),)
+ BUS:=PCI
+ endif
endif
-ifeq ($(ARCH),mipsel)
- HAL_TARGET:=mips-le-elf
+
+ifneq ($(CONFIG_CPU_MIPS32_R2),)
+ ifeq ($(ARCH),mips)
+ HAL_TARGET:=mips32r2-be-elf
+ endif
+ ifeq ($(ARCH),mipsel)
+ HAL_TARGET:=mips32r2-le-elf
+ endif
+else
+ ifeq ($(ARCH),mips)
+ HAL_TARGET:=mips32-be-elf
+ endif
+ ifeq ($(ARCH),mipsel)
+ HAL_TARGET:=mips32-le-elf
+ endif
endif
ifeq ($(ARCH),i386)
HAL_TARGET:=i386-elf
HAL_TARGET:=i386-elf
endif
ifeq ($(ARCH),armeb)
- HAL_TARGET:=xscale-be-elf
+ HAL_TARGET:=xscale-be-elfgnueabi
endif
ifeq ($(ARCH),arm)
- HAL_TARGET:=xscale-le-elf
+ HAL_TARGET:=xscale-le-elfgnueabi
+ ifeq ($(BOARD),cns21xx)
+ HAL_TARGET:=armv4-le-elfgnueabi
+ endif
+ ifeq ($(BOARD),cns3xxx)
+ HAL_TARGET:=arm11-le-elfgnueabi
+ endif
+ ifeq ($(BOARD),gemini)
+ HAL_TARGET:=armv4-le-elfgnueabi
+ endif
endif
ifeq ($(ARCH),powerpc)
HAL_TARGET:=powerpc-be-elf
endif
-
ifneq ($(CONFIG_TARGET_atheros),)
- BUS:=AHB
- HAL_TARGET:=ap51
-else
- ifneq ($(CONFIG_PCI_SUPPORT),)
- BUS:=PCI
- endif
+ HAL_TARGET:=wisoc
endif
-# XXX: remove this check later when we have PCI support properly detected on all targets
-ifneq ($(CONFIG_TARGET_uml),)
- BUS:=
+ifdef CONFIG_MADWIFI_RCA_MINSTREL
+ RATE_CONTROL:=minstrel
endif
-RATE_CONTROL:=minstrel
+ifdef CONFIG_MADWIFI_RCA_ONOE
+ RATE_CONTROL:=onoe
+endif
+ifdef CONFIG_MADWIFI_RCA_AMRR
+ RATE_CONTROL:=amrr
+endif
+
+ifdef CONFIG_MADWIFI_RCA_SAMPLERATE
+ RATE_CONTROL:=sample
+endif
+
+ifneq ($(CONFIG_MADWIFI_SINGLE_MODULE),)
+MADWIFI_FILES:= $(PKG_BUILD_DIR)/ath_hal/ath_hal.ko
+else
MADWIFI_FILES:= \
- $(PKG_BUILD_DIR)/net80211/wlan.$(LINUX_KMOD_SUFFIX) \
- $(PKG_BUILD_DIR)/net80211/wlan_scan_ap.$(LINUX_KMOD_SUFFIX) \
- $(PKG_BUILD_DIR)/net80211/wlan_scan_sta.$(LINUX_KMOD_SUFFIX) \
- $(PKG_BUILD_DIR)/ath_hal/ath_hal.$(LINUX_KMOD_SUFFIX) \
- $(PKG_BUILD_DIR)/ath_rate/$(RATE_CONTROL)/ath_rate_$(RATE_CONTROL).$(LINUX_KMOD_SUFFIX) \
- $(PKG_BUILD_DIR)/net80211/wlan_acl.$(LINUX_KMOD_SUFFIX) \
- $(PKG_BUILD_DIR)/net80211/wlan_ccmp.$(LINUX_KMOD_SUFFIX) \
- $(PKG_BUILD_DIR)/net80211/wlan_tkip.$(LINUX_KMOD_SUFFIX) \
- $(PKG_BUILD_DIR)/net80211/wlan_wep.$(LINUX_KMOD_SUFFIX) \
- $(PKG_BUILD_DIR)/net80211/wlan_xauth.$(LINUX_KMOD_SUFFIX) \
-
-MADWIFI_AUTOLOAD:= \
+ $(PKG_BUILD_DIR)/net80211/wlan.ko \
+ $(PKG_BUILD_DIR)/net80211/wlan_scan_ap.ko \
+ $(PKG_BUILD_DIR)/net80211/wlan_scan_sta.ko \
+ $(PKG_BUILD_DIR)/ath_hal/ath_hal.ko \
+ $(PKG_BUILD_DIR)/ath_rate/$(RATE_CONTROL)/ath_rate_$(RATE_CONTROL).ko \
+ $(PKG_BUILD_DIR)/net80211/wlan_acl.ko \
+ $(PKG_BUILD_DIR)/net80211/wlan_ccmp.ko \
+ $(PKG_BUILD_DIR)/net80211/wlan_tkip.ko \
+ $(PKG_BUILD_DIR)/net80211/wlan_wep.ko \
+ $(PKG_BUILD_DIR)/net80211/wlan_xauth.ko
+endif
+
+ifneq ($(CONFIG_MADWIFI_SINGLE_MODULE),)
+ MADWIFI_AUTOLOAD:= ath_hal
+else
+ MADWIFI_AUTOLOAD:= \
wlan \
wlan_scan_ap \
wlan_scan_sta \
wlan_ccmp \
wlan_tkip \
wlan_wep \
- wlan_xauth \
+ wlan_xauth
+endif
ifeq ($(findstring AHB,$(BUS)),AHB)
- MADWIFI_FILES+= $(PKG_BUILD_DIR)/ath/ath_ahb.$(LINUX_KMOD_SUFFIX)
- MADWIFI_AUTOLOAD+= ath_ahb
+ MADWIFI_FILES+= $(PKG_BUILD_DIR)/ath/ath_ahb.ko
+ MADWIFI_AUTOLOAD+= ath_ahb
endif
ifeq ($(findstring PCI,$(BUS)),PCI)
- MADWIFI_FILES+= $(PKG_BUILD_DIR)/ath/ath_pci.$(LINUX_KMOD_SUFFIX)
- MADWIFI_AUTOLOAD+= ath_pci
+ MADWIFI_FILES+= $(PKG_BUILD_DIR)/ath/ath_pci.ko
+ MADWIFI_AUTOLOAD+= ath_pci
+endif
+
+MADWIFI_APPLETS:=80211stats athchans athkey athstats wlanconfig ath_info madwifi_multi
+ifdef CONFIG_MADWIFI_DEBUG
+ MADWIFI_APPLETS += athdebug 80211debug
endif
define KernelPackage/madwifi
SUBMENU:=Wireless Drivers
TITLE:=Driver for Atheros wireless chipsets
- URL:=http://madwifi.org/
- DEPENDS:=+wireless-tools @PCI_SUPPORT||TARGET_atheros @!TARGET_avr32 @!TARGET_etrax @!TARGET_uml
+ URL:=http://madwifi-project.org/
+ MAINTAINER:=Felix Fietkau <nbd@openwrt.org>
+ DEPENDS:=+wireless-tools @PCI_SUPPORT @(!(TARGET_avr32||TARGET_cobalt||TARGET_ep93xx||TARGET_etrax||TARGET_octeon||TARGET_pxcab||TARGET_sibyte||LINUX_3_1||LINUX_3_2)||BROKEN) +@DRIVER_WEXT_SUPPORT
FILES:=$(MADWIFI_FILES)
AUTOLOAD:=$(call AutoLoad,50,$(MADWIFI_AUTOLOAD))
+ MENU:=1
endef
define KernelPackage/madwifi/description
This package contains a driver for Atheros 802.11a/b/g chipsets.
endef
+define KernelPackage/madwifi/config
+ source "$(SOURCE)/Config.in"
+endef
+
+MADWIFI_INC = \
+ -I$(PKG_BUILD_DIR) \
+ -I$(PKG_BUILD_DIR)/include \
+ -I$(PKG_BUILD_DIR)/hal \
+ -I$(PKG_BUILD_DIR)/ath \
+ -I$(PKG_BUILD_DIR)/ath_hal \
+ -I$(PKG_BUILD_DIR)/net80211 \
+ -I$(STAGING_DIR)/usr/include/wprobe \
+ -include $(PKG_BUILD_DIR)/include/compat.h
+
MAKE_ARGS:= \
PATH="$(TARGET_PATH)" \
ARCH="$(LINUX_KARCH)" \
+ ARCH-y="$(LINUX_KARCH)" \
CROSS_COMPILE="$(TARGET_CROSS)" \
TARGET="$(HAL_TARGET)" \
TOOLPREFIX="$(KERNEL_CROSS)" \
TOOLPATH="$(KERNEL_CROSS)" \
KERNELPATH="$(LINUX_DIR)" \
LDOPTS="--no-warn-mismatch " \
- ATH_RATE="ath_rate/$(RATE_CONTROL)" \
- WARNINGS="" \
- DOMULTI=1
+ ATH_RATE="$(RATE_CONTROL)" \
+ ATH_CAP_SUPERG_COMP="$(COMPRESSION)" \
+ DO_MULTI=1 \
+ SINGLE_MODULE=$(if $(CONFIG_MADWIFI_SINGLE_MODULE),1) \
+ INCS="$(MADWIFI_INC)" \
+ $(if $(CONFIG_MADWIFI_DEBUG),,DEBUG=) WARNINGS="-Wno-unused"
MAKE_VARS:= \
- COPTS="-DCONFIG_ATHEROS_RATE_DEFAULT='\"$(RATE_CONTROL)\"'" \
+ COPTS="-DATH_REVERSE_ENGINEERING=1" \
+
+define Build/Prepare/HAL
+ rm -rf $(PKG_BUILD_DIR)/tmp
+ mkdir -p $(PKG_BUILD_DIR)/tmp
+ tar xvzf $(DL_DIR)/$(HAL_FILE) -C $(PKG_BUILD_DIR)/tmp
+ $(CP) $(PKG_BUILD_DIR)/tmp/ath_hal*/* $(PKG_BUILD_DIR)/hal/
+ rm -rf $(PKG_BUILD_DIR)/tmp
+endef
+
+define Build/Prepare
+ $(call Build/Prepare/Default)
+ $(call Build/Prepare/HAL)
+ # patch cflags
+ $(SED) 's, -E[LB],,' \
+ -e 's, -mips2,,' \
+ -e 's, -mapcs-32,,' \
+ -e 's, -mlong-calls,,' \
+ $(PKG_BUILD_DIR)/hal/public/*.inc
+ $(SED) 's,march=armv4,march=armv5te,' \
+ $(PKG_BUILD_DIR)/hal/public/xscale*.inc
+endef
ifeq ($(findstring AHB,$(BUS)),AHB)
define Build/Compile/ahb
$(CP) $(PKG_BUILD_DIR)/net80211/*.h $(1)/usr/include/madwifi/net80211/
endef
-define Build/UninstallDev
- rm -rf $(1)/usr/include/madwifi
-endef
-
define KernelPackage/madwifi/install
- $(INSTALL_DIR) $(1)/lib/wifi
- $(INSTALL_DATA) ./files/lib/wifi/madwifi.sh $(1)/lib/wifi
$(INSTALL_DIR) $(1)/usr/sbin
- $(CP) $(PKG_BUILD_DIR)/tools/{madwifi_multi,80211stats,athchans,athctrl,athkey,athstats,wlanconfig} $(1)/usr/sbin/
+ $(CP) ./files/* $(1)/
+ $(CP) $(foreach applet,$(MADWIFI_APPLETS),$(PKG_BUILD_DIR)/tools/$(applet)) $(1)/usr/sbin/
endef
$(eval $(call KernelPackage,madwifi))
projects / openwrt.git / blobdiff