-# Makefile for buildroot2
+# Makefile for OpenWrt
#
-# Copyright (C) 1999-2004 by Erik Andersen <andersen@codepoet.org>
+# Copyright (C) 2007 OpenWrt.org
#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-#
-
-#--------------------------------------------------------------
-# Just run 'make menuconfig', configure stuff, then run 'make'.
-# You shouldn't need to mess with anything beyond this point...
-#--------------------------------------------------------------
-TOPDIR=./
-CONFIG_CONFIG_IN = Config.in
-CONFIG_DEFCONFIG = .defconfig
-CONFIG = package/config
-
-noconfig_targets := menuconfig config oldconfig randconfig \
- defconfig allyesconfig allnoconfig release tags
-
-# Pull in the user's configuration file
-ifeq ($(filter $(noconfig_targets),$(MAKECMDGOALS)),)
--include $(TOPDIR).config
-endif
-
-ifeq ($(BR2_TAR_VERBOSITY),y)
-TAR_OPTIONS=-xvf
-else
-TAR_OPTIONS=-xf
-endif
-
-ifeq ($(strip $(BR2_HAVE_DOT_CONFIG)),y)
-
-#############################################################
-#
-# The list of stuff to build for the target toolchain
-# along with the packages to build for the target.
-#
-##############################################################
-TARGETS:=host-sed kernel-headers uclibc-configured binutils gcc uclibc-target-utils linux openwrt
-
-include toolchain/Makefile.in
-include package/Makefile.in
-
-#############################################################
-#
-# You should probably leave this stuff alone unless you know
-# what you are doing.
-#
-#############################################################
-
-
-
-all: world
-
-# In this section, we need .config
-include .config.cmd
-# We also need the various per-package makefiles, which also add
-# each selected package to TARGETS if that package was selected
-# in the .config file.
-include toolchain/*/*.mk
-include package/*/*.mk
-include target/*/*.mk
+TOPDIR:=${CURDIR}
+LC_ALL:=C
+LANG:=C
+export TOPDIR LC_ALL LANG
-# target stuff is last so it can override anything else
-include target/Makefile.in
+world:
-TARGETS_CLEAN:=$(patsubst %,%-clean,$(TARGETS))
-TARGETS_SOURCE:=$(patsubst %,%-source,$(TARGETS))
-TARGETS_DIRCLEAN:=$(patsubst %,%-dirclean,$(TARGETS))
+include $(TOPDIR)/include/host.mk
-world: $(DL_DIR) $(BUILD_DIR) $(STAGING_DIR) $(TARGET_DIR) $(TARGETS)
- @echo DONE.
-
-.PHONY: all world clean dirclean distclean source $(TARGETS) \
- $(TARGETS_CLEAN) $(TARGETS_DIRCLEAN) $(TARGETS_SOURCE) \
- $(DL_DIR) $(BUILD_DIR) $(TOOL_BUILD_DIR) $(STAGING_DIR)
-
-#############################################################
-#
-# staging and target directories do NOT list these as
-# dependancies anywhere else
-#
-#############################################################
-$(DL_DIR):
- @mkdir -p $(DL_DIR)
-
-$(BUILD_DIR):
- @mkdir -p $(BUILD_DIR)
-
-$(TOOL_BUILD_DIR):
- @mkdir -p $(TOOL_BUILD_DIR)
-
-$(STAGING_DIR):
- @mkdir -p $(STAGING_DIR)/lib
- @mkdir -p $(STAGING_DIR)/include
- @mkdir -p $(STAGING_DIR)/$(REAL_GNU_TARGET_NAME)
- @ln -sf ../lib $(STAGING_DIR)/$(REAL_GNU_TARGET_NAME)/lib
-
-$(TARGET_DIR):
- if [ -f "$(TARGET_SKELETON)" ] ; then \
- zcat $(TARGET_SKELETON) | tar -C $(BUILD_DIR) -xf -; \
- fi;
- if [ -d "$(TARGET_SKEL_DIR)" ] ; then \
- cp -a $(TARGET_SKEL_DIR)/* $(TARGET_DIR)/; \
- fi;
- -find $(TARGET_DIR) -type d -name CVS | xargs rm -rf
- -find $(TARGET_DIR) -type d -name .svn | xargs rm -rf
- -ln -sf /tmp/resolv.conf $(TARGET_DIR)/etc
- -mkdir -p $(TARGET_DIR)/jffs
-
-source: $(TARGETS_SOURCE)
-
-#############################################################
-#
-# Cleanup and misc junk
-#
-#############################################################
-clean:
- rm -rf $(TARGET_DIR) $(IMAGE).*
- $(MAKE) openwrt-image-clean
-
-dirclean: $(TARGETS_DIRCLEAN)
- rm -rf $(TARGET_DIR) $(IMAGE).*
- $(MAKE) openwrt-image-dirclean
-
-distclean: clean
- rm -rf $(DL_DIR) $(BUILD_DIR) $(TOOL_BUILD_DIR)
- rm .config* .tmpconfig.h
-
-sourceball:
- rm -rf $(BUILD_DIR)
- set -e; \
- cd ..; \
- rm -f buildroot.tar.bz2; \
- tar -cvf buildroot.tar buildroot; \
- bzip2 -9 buildroot.tar; \
+ifneq ($(OPENWRT_BUILD),1)
+ # XXX: these three lines are normally defined by rules.mk
+ # but we can't include that file in this context
+ empty:=
+ space:= $(empty) $(empty)
+ _SINGLE=export MAKEFLAGS=$(space);
+ override OPENWRT_BUILD=1
+ export OPENWRT_BUILD
+ include $(TOPDIR)/include/debug.mk
+ include $(TOPDIR)/include/depends.mk
+ include $(TOPDIR)/include/toplevel.mk
+else
+ include rules.mk
+ include $(INCLUDE_DIR)/depends.mk
+ include $(INCLUDE_DIR)/subdir.mk
+ include target/Makefile
+ include package/Makefile
+ include tools/Makefile
+ include toolchain/Makefile
+
+$(toolchain/stamp-install): $(tools/stamp-install)
+$(target/stamp-compile): $(toolchain/stamp-install) $(tools/stamp-install) $(BUILD_DIR)/.prepared
+$(package/stamp-cleanup): $(target/stamp-compile)
+$(package/stamp-compile): $(target/stamp-compile) $(package/stamp-cleanup)
+$(package/stamp-install): $(package/stamp-compile)
+$(package/stamp-rootfs-prepare): $(package/stamp-install)
+$(target/stamp-install): $(package/stamp-compile) $(package/stamp-install) $(package/stamp-rootfs-prepare)
+
+$(BUILD_DIR)/.prepared: Makefile
+ @mkdir -p $$(dirname $@)
+ @touch $@
+
+clean: FORCE
+ rm -rf $(BUILD_DIR) $(BIN_DIR)
+ $(_SINGLE)$(SUBMAKE) target/linux/clean
+
+dirclean: clean
+ rm -rf $(STAGING_DIR) $(STAGING_DIR_HOST) $(STAGING_DIR_TOOLCHAIN) $(TOOLCHAIN_DIR) $(BUILD_DIR_HOST) $(BUILD_DIR_TOOLCHAIN)
+ rm -rf $(TMP_DIR)
+
+tmp/.prereq_packages: .config
+ unset ERROR; \
+ for package in $(sort $(prereq-y) $(prereq-m)); do \
+ $(_SINGLE)$(NO_TRACE_MAKE) -s -r -C package/$$package prereq || ERROR=1; \
+ done; \
+ if [ -n "$$ERROR" ]; then \
+ echo "Package prerequisite check failed."; \
+ false; \
+ fi
+ touch $@
-else # ifeq ($(strip $(BR2_HAVE_DOT_CONFIG)),y)
+# check prerequisites before starting to build
+prereq: $(target/stamp-prereq) tmp/.prereq_packages
-all: menuconfig
+prepare: .config $(tools/stamp-install) $(toolchain/stamp-install)
+world: prepare $(target/stamp-compile) $(package/stamp-cleanup) $(package/stamp-compile) $(package/stamp-install) $(package/stamp-rootfs-prepare) $(target/stamp-install) FORCE
+ $(_SINGLE)$(SUBMAKE) -r package/index
-# configuration
-# ---------------------------------------------------------------------------
+# update all feeds, re-create index files, install symlinks
+package/symlinks:
+ $(SCRIPT_DIR)/feeds update -a
+ $(SCRIPT_DIR)/feeds install -a
-$(CONFIG)/conf:
- $(MAKE) -C $(CONFIG) conf
- -@if [ ! -f .config ] ; then \
- cp $(CONFIG_DEFCONFIG) .config; \
- fi
-$(CONFIG)/mconf:
- $(MAKE) -C $(CONFIG) ncurses conf mconf
- -@if [ ! -f .config ] ; then \
- cp $(CONFIG_DEFCONFIG) .config; \
- fi
+# re-create index files, install symlinks
+package/symlinks-install:
+ $(SCRIPT_DIR)/feeds update -i
+ $(SCRIPT_DIR)/feeds install -a
-menuconfig: $(CONFIG)/mconf
- -touch .config
- -cp .config .config.test
- @$(CONFIG)/mconf $(CONFIG_CONFIG_IN)
-
-config: $(CONFIG)/conf
- -touch .config
- -cp .config .config.test
- @$(CONFIG)/conf $(CONFIG_CONFIG_IN)
-
-oldconfig: $(CONFIG)/conf
- -touch .config
- -cp .config .config.test
- @$(CONFIG)/conf -o $(CONFIG_CONFIG_IN)
-
-randconfig: $(CONFIG)/conf
- -touch .config
- -cp .config .config.test
- @$(CONFIG)/conf -r $(CONFIG_CONFIG_IN)
-
-allyesconfig: $(CONFIG)/conf
- #@$(CONFIG)/conf -y $(CONFIG_CONFIG_IN)
- #sed -i -e "s/^CONFIG_DEBUG.*/# CONFIG_DEBUG is not set/" .config
- -touch .config
- -cp .config .config.test
- @$(CONFIG)/conf -o $(CONFIG_CONFIG_IN)
-
-allnoconfig: $(CONFIG)/conf
- -touch .config
- -cp .config .config.test
- @$(CONFIG)/conf -n $(CONFIG_CONFIG_IN)
-
-defconfig: $(CONFIG)/conf
- -touch .config
- -cp .config .config.test
- @$(CONFIG)/conf -d $(CONFIG_CONFIG_IN)
-
-#############################################################
-#
-# Cleanup and misc junk
-#
-#############################################################
-clean:
- @$(MAKE) -C $(CONFIG) clean
-
-distclean: clean
+# remove all symlinks, don't touch ./feeds
+package/symlinks-clean:
+ $(SCRIPT_DIR)/feeds uninstall -a
-endif # ifeq ($(strip $(BR2_HAVE_DOT_CONFIG)),y)
+.PHONY: clean dirclean prereq prepare world package/symlinks package/symlinks-install package/symlinks-clean
-.PHONY: dummy subdirs release distclean clean config oldconfig \
- menuconfig tags check test depend
-
-targets:
- @echo $(TARGETS)
+endif
projects / openwrt.git / blobdiff