[package] libpcap: explicitely disable libnl support to prevent different build resul...

[openwrt.git] / target / linux / orion / files / arch / arm / mach-orion5x / dt2-setup.c

diff --git a/target/linux/orion/files/arch/arm/mach-orion5x/dt2-setup.c b/target/linux/orion/files/arch/arm/mach-orion5x/dt2-setup.c
index f794b4c..a3d9c82 100644 (file)
--- a/target/linux/orion/files/arch/arm/mach-orion5x/dt2-setup.c
+++ b/target/linux/orion/files/arch/arm/mach-orion5x/dt2-setup.c
@@ -119,11 +119,11 @@ void __init dt2_pci_preinit(void)
        if (gpio_request(pin, "PCI IntA") == 0) {
                if (gpio_direction_input(pin) == 0) {
                        irq = gpio_to_irq(pin);
-                       set_irq_type(irq, IRQ_TYPE_LEVEL_LOW);
+                       irq_set_irq_type(irq, IRQ_TYPE_LEVEL_LOW);
                        printk (KERN_INFO "PCI IntA IRQ: %d\n", irq);
                } else {
                        printk(KERN_ERR "dt2_pci_preinit failed to "
-                                       "set_irq_type pin %d\n", pin);
+                                       "irq_set_irq_type pin %d\n", pin);
                        gpio_free(pin);
                }
        } else {
@@ -134,11 +134,11 @@ void __init dt2_pci_preinit(void)
        if (gpio_request(pin, "PCI IntB") == 0) {
                if (gpio_direction_input(pin) == 0) {
                        irq = gpio_to_irq(pin);
-                       set_irq_type(irq, IRQ_TYPE_LEVEL_LOW);
+                       irq_set_irq_type(irq, IRQ_TYPE_LEVEL_LOW);
                        printk (KERN_INFO "PCI IntB IRQ: %d\n", irq);
                } else {
                        printk(KERN_ERR "dt2_pci_preinit failed to "
-                                       "set_irq_type pin %d\n", pin);
+                                       "irq_set_irq_type pin %d\n", pin);
                        gpio_free(pin);
                }
        } else {
@@ -209,7 +209,7 @@ static struct mv643xx_eth_platform_data dt2_eth_data = {
        .duplex         = DUPLEX_FULL,
 };
 
-static struct dsa_platform_data dt2_switch_data = {
+static struct dsa_chip_data dt2_switch_chip_data = {
        .port_names[0] = "wan",
        .port_names[1] = "lan1",
        .port_names[2] = "lan2",
@@ -218,6 +218,11 @@ static struct dsa_platform_data dt2_switch_data = {
        .port_names[5] = "lan4",
 };
 
+static struct dsa_platform_data dt2_switch_plat_data = {
+       .nr_chips       = 1,
+       .chip           = &dt2_switch_chip_data,
+};
+
 /*****************************************************************************
  * RTC ISL1208 on I2C bus
  ****************************************************************************/
@@ -235,28 +240,28 @@ static struct mv_sata_platform_data dt2_sata_data = {
 /*****************************************************************************
  * General Setup
  ****************************************************************************/
-static struct orion5x_mpp_mode dt2_mpp_modes[] __initdata = {
-       {  0, MPP_GPIO },               // RTC interrupt
-       {  1, MPP_GPIO },               // 88e6131 interrupt
-       {  2, MPP_GPIO },               // PCI_intB
-       {  3, MPP_GPIO },               // PCI_intA
-       {  4, MPP_GPIO },               // reset button switch
-       {  5, MPP_GPIO },
-       {  6, MPP_GPIO },
-       {  7, MPP_GPIO },
-       {  8, MPP_GPIO },
-       {  9, MPP_GIGE },               /* GE_RXERR */
-       { 10, MPP_GPIO },               // usb
-       { 11, MPP_GPIO },               // usb
-       { 12, MPP_GIGE },               // GE_TXD[4]
-       { 13, MPP_GIGE },               // GE_TXD[5]
-       { 14, MPP_GIGE },               // GE_TXD[6]
-       { 15, MPP_GIGE },               // GE_TXD[7]
-       { 16, MPP_GIGE },               // GE_RXD[4]
-       { 17, MPP_GIGE },               // GE_RXD[5]
-       { 18, MPP_GIGE },               // GE_RXD[6]
-       { 19, MPP_GIGE },               // GE_RXD[7]
-       { -1 },
+static unsigned int dt2_mpp_modes[] __initdata = {
+       MPP0_GPIO,              // RTC interrupt
+       MPP1_GPIO,              // 88e6131 interrupt
+       MPP2_GPIO,              // PCI_intB
+       MPP3_GPIO,              // PCI_intA
+       MPP4_GPIO,              // reset button switch
+       MPP5_GPIO,
+       MPP6_GPIO,
+       MPP7_GPIO,
+       MPP8_GPIO,
+       MPP9_GIGE,              /* GE_RXERR */
+       MPP10_GPIO,             // usb
+       MPP11_GPIO,             // usb
+       MPP12_GIGE,             // GE_TXD[4]
+       MPP13_GIGE,             // GE_TXD[5]
+       MPP14_GIGE,             // GE_TXD[6]
+       MPP15_GIGE,             // GE_TXD[7]
+       MPP16_GIGE,             // GE_RXD[4]
+       MPP17_GIGE,             // GE_RXD[5]
+       MPP18_GIGE,             // GE_RXD[6]
+       MPP19_GIGE,             // GE_RXD[7]
+       0,
 };
 
 /*****************************************************************************
@@ -289,7 +294,6 @@ static irqreturn_t dt2_power_handler(int irq, void *dev_id)
 
 static void __init dt2_init(void)
 {
-       DECLARE_MAC_BUF(mac_buf);
        /*
         * Setup basic Orion functions. Need to be called early.
         */
@@ -300,7 +304,6 @@ static void __init dt2_init(void)
        /*
         * Configure peripherals.
         */
-       gpio_display();
 
        orion5x_uart0_init();
        orion5x_ehci0_init();
@@ -314,14 +317,14 @@ static void __init dt2_init(void)
 
        printk(KERN_INFO "Serial: %s\n", dt2_eeprom.fc.dt2_serial_number);
        printk(KERN_INFO "Revision: %016x\n", dt2_eeprom.fc.dt2_revision);
-       printk(KERN_INFO "DT2: Using MAC address %s for port 0\n",
-              print_mac(mac_buf, dt2_eeprom.gw.mac_addr[0]));
-       printk(KERN_INFO "DT2: Using MAC address %s for port 1\n",
-              print_mac(mac_buf, dt2_eeprom.gw.mac_addr[1]));
+       printk(KERN_INFO "DT2: Using MAC address %pM for port 0\n",
+              dt2_eeprom.gw.mac_addr[0]);
+       printk(KERN_INFO "DT2: Using MAC address %pM for port 1\n",
+              dt2_eeprom.gw.mac_addr[1]);
 
        orion5x_eth_init(&dt2_eth_data);
        memcpy(dt2_eth_data.mac_addr, dt2_eeprom.gw.mac_addr[0], 6);
-       orion5x_eth_switch_init(&dt2_switch_data, NO_IRQ);
+       orion5x_eth_switch_init(&dt2_switch_plat_data, NO_IRQ);
 
        i2c_register_board_info(0, &dt2_i2c_rtc, 1);
 
@@ -434,8 +437,6 @@ void __init openwrt_fixup(struct machine_desc *mdesc, struct tag *t,
 /* Warning: Freecom uses their own custom bootloader with mach-type (=1500) */
 MACHINE_START(DT2, "Freecom DataTank Gateway")
        /* Maintainer: Zintis Petersons <Zintis.Petersons@abcsolutions.lv> */
-       .phys_io        = ORION5X_REGS_PHYS_BASE,
-       .io_pg_offst    = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
        .boot_params    = 0x00000100,
        .init_machine   = dt2_init,
        .map_io         = orion5x_map_io,