#!/bin/sh
append DRIVERS "atheros"
+find_atheros_phy() {
+ local device="$1"
+
+ local macaddr="$(config_get "$device" macaddr | tr 'A-Z' 'a-z')"
+ config_get phy "$device" phy
+ [ -z "$phy" -a -n "$macaddr" ] && {
+ cd /proc/sys/dev
+ for phy in $(ls -d wifi* 2>&-); do
+ [ "$macaddr" = "$(cat /sys/class/net/${phy}/address)" ] || continue
+ config_set "$device" phy "$phy"
+ break
+ done
+ config_get phy "$device" phy
+ }
+ [ -n "$phy" -a -d "/proc/sys/dev/$phy" ] || {
+ echo "phy for wifi device $1 not found"
+ return 1
+ }
+ [ -z "$macaddr" ] && {
+ config_set "$device" macaddr "$(cat /sys/class/net/${phy}/address)"
+ }
+ return 0
+}
+
scan_atheros() {
local device="$1"
local wds
- local adhoc sta ap
+ local adhoc ahdemo sta ap monitor disabled
+
+ [ ${device%[0-9]} = "wifi" ] && config_set "$device" phy "$device"
+
+ local ifidx=0
config_get vifs "$device" vifs
for vif in $vifs; do
-
+ config_get_bool disabled "$vif" disabled 0
+ [ $disabled = 0 ] || continue
+
+ local vifname
+ [ $ifidx -gt 0 ] && vifname="ath${device#radio}-$ifidx" || vifname="ath${device#radio}"
+
config_get ifname "$vif" ifname
- config_set "$vif" ifname "${ifname:-ath}"
+ config_set "$vif" ifname "${ifname:-$vifname}"
config_get mode "$vif" mode
case "$mode" in
;;
*) echo "$device($vif): Invalid mode, ignored."; continue;;
esac
+
+ ifidx=$(($ifidx + 1))
done
case "${adhoc:+1}:${sta:+1}:${ap:+1}" in
disable_atheros() (
local device="$1"
+ find_atheros_phy "$device" || return 0
+ config_get phy "$device" phy
+
set_wifi_down "$device"
-
+
include /lib/network
cd /proc/sys/net
for dev in *; do
- grep "$device" "$dev/%parent" >/dev/null 2>/dev/null && {
+ grep "$phy" "$dev/%parent" >/dev/null 2>/dev/null && {
[ -f "/var/run/wifi-${dev}.pid" ] &&
kill "$(cat "/var/run/wifi-${dev}.pid")"
ifconfig "$dev" down
enable_atheros() {
local device="$1"
+ find_atheros_phy "$device" || return 0
+ config_get phy "$device" phy
+
config_get regdomain "$device" regdomain
- [ -n "$regdomain" ] && echo "$regdomain" > /proc/sys/dev/$device/regdomain
+ [ -n "$regdomain" ] && echo "$regdomain" > /proc/sys/dev/$phy/regdomain
config_get country "$device" country
- [ -z "$country" ] && country="0"
- echo "$country" > /proc/sys/dev/$device/countrycode
+ case "$country" in
+ [A-Za-z]*) country=`grep -i "$country" /lib/wifi/madwifi_countrycodes.txt |cut -d " " -f 2`;;
+ [0-9]*) ;;
+ *) country="" ;;
+ esac
+ [ -n "$country" ] && echo "$country" > /proc/sys/dev/$phy/countrycode
- config_get outdoor "$device" outdoor
- [ -z "$outdoor" ] && outdoor="0"
- echo "$outdoor" > /proc/sys/dev/$device/outdoor
+ config_get_bool outdoor "$device" outdoor "0"
+ echo "$outdoor" > /proc/sys/dev/$phy/outdoor
config_get channel "$device" channel
config_get vifs "$device" vifs
[ auto = "$channel" ] && channel=0
- local first=1
+ config_get_bool antdiv "$device" diversity
+ config_get antrx "$device" rxantenna
+ config_get anttx "$device" txantenna
+ config_get_bool softled "$device" softled
+ config_get antenna "$device" antenna
+
+ devname="$(cat /proc/sys/dev/$phy/dev_name)"
+ local antgpio=
+ local invert=
+ case "$devname" in
+ NanoStation2) antgpio=7; invert=1;;
+ NanoStation5) antgpio=1; invert=1;;
+ "NanoStation Loco2") antgpio=2;;
+ "NanoStation Loco5")
+ case "$antenna" in
+ horizontal) antdiv=0; anttx=1; antrx=1;;
+ vertical) antdiv=0; anttx=2; antrx=2;;
+ *) antdiv=1; anttx=0; antrx=0;;
+ esac
+ ;;
+ esac
+ if [ -n "$invert" ]; then
+ _set="clear"
+ _clear="set"
+ else
+ _set="set"
+ _clear="clear"
+ fi
+ if [ -n "$antgpio" ]; then
+ softled=0
+ case "$devname" in
+ "NanoStation Loco2")
+ antdiv=0
+ antrx=1
+ anttx=1
+ case "$antenna" in
+ horizontal) gpioval=0;;
+ *) gpioval=1;;
+ esac
+ ;;
+ *)
+ case "$antenna" in
+ external) antdiv=0; antrx=1; anttx=1; gpioval=1;;
+ horizontal) antdiv=0; antrx=1; anttx=1; gpioval=0;;
+ vertical) antdiv=0; antrx=2; anttx=2; gpioval=0;;
+ auto) antdiv=1; antrx=0; anttx=0; gpioval=0;;
+ esac
+ ;;
+ esac
+
+ [ -x "$(which gpioctl 2>/dev/null)" ] || antenna=
+ gpioctl "dirout" "$antgpio" >/dev/null 2>&1
+ case "$gpioval" in
+ 0)
+ gpioctl "$_clear" "$antgpio" >/dev/null 2>&1
+ ;;
+ 1)
+ gpioctl "$_set" "$antgpio" >/dev/null 2>&1
+ ;;
+ esac
+ fi
+
+ [ -n "$antdiv" ] && sysctl -w dev."$phy".diversity="$antdiv" >&-
+ [ -n "$antrx" ] && sysctl -w dev."$phy".rxantenna="$antrx" >&-
+ [ -n "$anttx" ] && sysctl -w dev."$phy".txantenna="$anttx" >&-
+ [ -n "$softled" ] && sysctl -w dev."$phy".softled="$softled" >&-
+
+ config_get distance "$device" distance
+ [ -n "$distance" ] && sysctl -w dev."$phy".distance="$distance" >&-
+
for vif in $vifs; do
- local start_hostapd vif_txpower
- nosbeacon=
+ local start_hostapd= vif_txpower= nosbeacon=
config_get ifname "$vif" ifname
config_get enc "$vif" encryption
config_get eap_type "$vif" eap_type
config_get mode "$vif" mode
-
+
case "$mode" in
- sta) config_get nosbeacon "$device" nosbeacon;;
- adhoc) config_get nosbeacon "$vif" sw_merge;;
+ sta) config_get_bool nosbeacon "$device" nosbeacon;;
+ adhoc) config_get_bool nosbeacon "$vif" sw_merge 1;;
esac
-
- config_get ifname "$vif" ifname
- ifname=$(wlanconfig "$ifname" create wlandev "$device" wlanmode "$mode" ${nosbeacon:+nosbeacon})
+
+ [ "$nosbeacon" = 1 ] || nosbeacon=""
+ ifname=$(wlanconfig "$ifname" create nounit wlandev "$phy" wlanmode "$mode" ${nosbeacon:+nosbeacon})
[ $? -ne 0 ] && {
echo "enable_atheros($device): Failed to set up $mode vif $ifname" >&2
continue
}
config_set "$vif" ifname "$ifname"
- # only need to change freq band and channel on the first vif
config_get hwmode "$device" hwmode
[ -z "$hwmode" ] && config_get hwmode "$device" mode
*fh) hwmode=fh;;
*) hwmode=auto;;
esac
+ iwpriv "$ifname" mode "$hwmode"
iwpriv "$ifname" pureg "$pureg"
- [ "$first" = 1 ] && {
- iwpriv "$ifname" mode "$hwmode"
- iwconfig "$ifname" channel "$channel" >/dev/null 2>/dev/null
- }
-
+ iwconfig "$ifname" channel "$channel" >/dev/null 2>/dev/null
+
config_get_bool hidden "$vif" hidden 0
iwpriv "$ifname" hide_ssid "$hidden"
1|on|enabled) wds=1;;
*) wds=0;;
esac
- iwpriv "$ifname" wds "$wds"
+ iwpriv "$ifname" wds "$wds" >/dev/null 2>&1
[ "$mode" = ap -a "$wds" = 1 ] && {
config_get_bool wdssep "$vif" wdssep 1
}
case "$enc" in
- WEP|wep)
+ wep*)
+ case "$enc" in
+ *shared*) iwpriv "$ifname" authmode 2;;
+ *) iwpriv "$ifname" authmode 1;;
+ esac
for idx in 1 2 3 4; do
config_get key "$vif" "key${idx}"
iwconfig "$ifname" enc "[$idx]" "${key:-off}"
}
;;
esac
- config_get ssid "$vif" ssid
+
+ config_get_bool uapsd "$vif" uapsd 0
+ iwpriv "$ifname" uapsd "$uapsd"
config_get_bool bgscan "$vif" bgscan
[ -n "$bgscan" ] && iwpriv "$ifname" bgscan "$bgscan"
- config_get_bool antdiv "$device" diversity
- config_get antrx "$device" rxantenna
- config_get anttx "$device" txantenna
- config_get_bool softled "$device" softled 1
-
- devname="$(cat /proc/sys/dev/$device/dev_name)"
- antgpio=
- case "$devname" in
- NanoStation2) antgpio=7;;
- NanoStation5) antgpio=1;;
- esac
- if [ -n "$antgpio" ]; then
- softled=0
- config_get antenna "$device" antenna
- case "$antenna" in
- external) antdiv=0; antrx=1; anttx=1 ;;
- horizontal) antdiv=0; antrx=1; anttx=1 ;;
- vertical) antdiv=0; antrx=2; anttx=2 ;;
- auto) antdiv=1; antrx=0; anttx=0 ;;
- esac
-
- [ -x "$(which gpioctl 2>/dev/null)" ] || antenna=
- case "$antenna" in
- horizontal|vertical|auto)
- gpioctl "dirout" "$antgpio" >/dev/null 2>&1
- gpioctl "set" "$antgpio" >/dev/null 2>&1
- ;;
- external)
- gpioctl "dirout" "$antgpio" >/dev/null 2>&1
- gpioctl "clear" "$antgpio" >/dev/null 2>&1
- ;;
- esac
- fi
-
- [ -n "$antdiv" ] && sysctl -w dev."$device".diversity="$antdiv" >&-
- [ -n "$antrx" ] && sysctl -w dev."$device".rxantenna="$antrx" >&-
- [ -n "$anttx" ] && sysctl -w dev."$device".txantenna="$anttx" >&-
- [ -n "$softled" ] && sysctl -w dev."$device".softled="$softled" >&-
-
- config_get distance "$device" distance
- [ -n "$distance" ] && athctrl -i "$device" -d "$distance" >&-
-
config_get rate "$vif" rate
[ -n "$rate" ] && iwconfig "$ifname" rate "${rate%%.*}"
config_get rts "$vif" rts
[ -n "$rts" ] && iwconfig "$ifname" rts "${rts%%.*}"
- config_get_bool comp "$vif" compression
- [ -n "$comp" ] && iwpriv "$ifname" compression "$comp"
+ config_get_bool comp "$vif" compression 0
+ iwpriv "$ifname" compression "$comp" >/dev/null 2>&1
- config_get_bool minrate "$vif" minrate
+ config_get minrate "$vif" minrate
[ -n "$minrate" ] && iwpriv "$ifname" minrate "$minrate"
- config_get_bool maxrate "$vif" maxrate
+ config_get maxrate "$vif" maxrate
[ -n "$maxrate" ] && iwpriv "$ifname" maxrate "$maxrate"
config_get_bool burst "$vif" bursting
config_get_bool ar "$vif" ar
[ -n "$ar" ] && iwpriv "$ifname" ar "$ar"
- config_get_bool turbo "$vif" turbo
- [ -n "$turbo" ] && iwpriv "$ifname" turbo "$turbo"
-
config_get_bool beacon_power "$vif" beacon_power
[ -n "$beacon_power" ] && iwpriv "$ifname" beacon_pwr "$beacon_power"
config_set "$vif" bridge "$bridge"
start_net "$ifname" "$net_cfg"
}
- [ -n "$ssid" ] && iwconfig "$ifname" essid on
- iwconfig "$ifname" essid "$ssid"
+
+ config_get ssid "$vif" ssid
+ [ -n "$ssid" ] && {
+ iwconfig "$ifname" essid on
+ iwconfig "$ifname" essid ${ssid:+-- }"$ssid"
+ }
+
set_wifi_up "$vif" "$ifname"
# TXPower settings only work if device is up already
;;
wds|sta)
if eval "type wpa_supplicant_setup_vif" 2>/dev/null >/dev/null; then
- wpa_supplicant_setup_vif "$vif" madwifi || {
+ wpa_supplicant_setup_vif "$vif" wext || {
echo "enable_atheros($device): Failed to set up wpa_supplicant for interface $ifname" >&2
ifconfig "$ifname" down
wlanconfig "$ifname" destroy
}
fi
;;
+ adhoc)
+ if eval "type wpa_supplicant_setup_vif" 2>/dev/null >/dev/null; then
+ wpa_supplicant_setup_vif "$vif" madwifi || {
+ echo "enable_atheros($device): Failed to set up wpa"
+ ifconfig "$ifname" down
+ wlanconfig "$ifname" destroy
+ continue
+ }
+ fi
esac
- first=0
done
}
+check_atheros_device() {
+ [ ${1%[0-9]} = "wifi" ] && config_set "$1" phy "$1"
+ config_get phy "$1" phy
+ [ -z "$phy" ] && {
+ find_atheros_phy "$1" >/dev/null || return 0
+ config_get phy "$1" phy
+ }
+ [ "$phy" = "$dev" ] && found=1
+}
+
detect_atheros() {
+ devidx=0
+ config_load wireless
+ while :; do
+ config_get type "radio$devidx" type
+ [ -n "$type" ] || break
+ devidx=$(($devidx + 1))
+ done
cd /proc/sys/dev
[ -d ath ] || return
for dev in $(ls -d wifi* 2>&-); do
- config_get type "$dev" type
+ found=0
+ config_foreach check_atheros_device wifi-device
+ [ "$found" -gt 0 ] && continue
+
devname="$(cat /proc/sys/dev/$dev/dev_name)"
case "$devname" in
+ "NanoStation Loco2")
+ EXTRA_DEV="
+# Ubiquiti NanoStation Loco2 features
+ option antenna vertical # (horizontal|vertical)
+"
+ ;;
+ "NanoStation Loco5")
+ EXTRA_DEV="
+# Ubiquiti NanoStation Loco5 features
+ option antenna auto # (auto|horizontal|vertical)
+"
+ ;;
NanoStation*)
EXTRA_DEV="
# Ubiquiti NanoStation features
"
;;
esac
- [ "$type" = atheros ] && return
+
cat <<EOF
-config wifi-device $dev
+config wifi-device radio$devidx
option type atheros
option channel auto
+ option macaddr $(cat /sys/class/net/${dev}/address)
$EXTRA_DEV
# REMOVE THIS LINE TO ENABLE WIFI:
option disabled 1
config wifi-iface
- option device $dev
+ option device radio$devidx
option network lan
option mode ap
option ssid OpenWrt
option encryption none
+
EOF
+ devidx=$(($devidx + 1))
done
}
projects / openwrt.git / blobdiff