#
-# Copyright (C) 2006-2010 OpenWrt.org
+# Copyright (C) 2006-2012 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
define KernelPackage/usb-core
SUBMENU:=$(USB_MENU)
TITLE:=Support for USB
- DEPENDS:=@USB_SUPPORT +kmod-nls-base
- KCONFIG:=CONFIG_USB
- FILES:=$(LINUX_DIR)/drivers/usb/core/usbcore.ko
- AUTOLOAD:=$(call AutoLoad,20,usbcore,1)
+ DEPENDS:=@USB_SUPPORT
+ KCONFIG:=CONFIG_USB CONFIG_XPS_USB_HCD_XILINX=n CONFIG_USB_FHCI_HCD=n
+ ifeq ($(strip $(call CompareKernelPatchVer,$(KERNEL_PATCHVER),ge,3.2)),1)
+ FILES:= \
+ $(LINUX_DIR)/drivers/usb/core/usbcore.ko \
+ $(LINUX_DIR)/drivers/usb/usb-common.ko
+ AUTOLOAD:=$(call AutoLoad,20,usb-common usbcore,1)
+ else
+ FILES:=$(LINUX_DIR)/drivers/usb/core/usbcore.ko
+ AUTOLOAD:=$(call AutoLoad,20,usbcore,1)
+ endif
+ $(call AddDepends/nls)
endef
define KernelPackage/usb-core/description
endef
+define KernelPackage/usb-gadget
+ TITLE:=USB Gadget support
+ KCONFIG:=CONFIG_USB_GADGET
+ FILES:=
+ AUTOLOAD:=
+ DEPENDS:=@USB_GADGET_SUPPORT
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-gadget/description
+ Kernel support for USB Gadget mode.
+endef
+
+$(eval $(call KernelPackage,usb-gadget))
+
+
+define KernelPackage/usb-eth-gadget
+ TITLE:=USB Ethernet Gadget support
+ KCONFIG:= \
+ CONFIG_USB_ETH \
+ CONFIG_USB_ETH_RNDIS=y \
+ CONFIG_USB_ETH_EEM=y
+ DEPENDS:=+kmod-usb-gadget
+ FILES:=$(LINUX_DIR)/drivers/usb/gadget/g_ether.ko
+ AUTOLOAD:=$(call AutoLoad,52,g_ether)
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-eth-gadget/description
+ Kernel support for USB Ethernet Gadget.
+endef
+
+$(eval $(call KernelPackage,usb-eth-gadget))
+
+
define KernelPackage/usb-uhci
TITLE:=Support for UHCI controllers
KCONFIG:= \
define KernelPackage/usb-ohci
TITLE:=Support for OHCI controllers
+ DEPENDS:=+TARGET_brcm47xx:kmod-usb-brcm47xx
KCONFIG:= \
CONFIG_USB_OHCI \
CONFIG_USB_OHCI_HCD \
- CONFIG_USB_OHCI_AR71XX=y
+ CONFIG_USB_OHCI_ATH79=y \
+ CONFIG_USB_OHCI_BCM63XX=y \
+ CONFIG_USB_OHCI_RT3883=y \
+ CONFIG_USB_OCTEON_OHCI=y
FILES:=$(LINUX_DIR)/drivers/usb/host/ohci-hcd.ko
AUTOLOAD:=$(call AutoLoad,50,ohci-hcd,1)
$(call AddDepends/usb)
$(eval $(call KernelPackage,usb-ohci,1))
+define KernelPackage/musb-hdrc
+ TITLE:=Support for Mentor Graphics silicon dual role USB
+ KCONFIG:= \
+ CONFIG_USB_MUSB_HDRC \
+ CONFIG_MUSB_PIO_ONLY=n \
+ CONFIG_USB_MUSB_OTG=y \
+ CONFIG_USB_MUSB_DEBUG=y
+ DEPENDS:=@TARGET_omap24xx
+ FILES:=$(LINUX_DIR)/drivers/usb/musb/musb_hdrc.ko
+ AUTOLOAD:=$(call AutoLoad,46,musb_hdrc)
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/musb-hdrc/description
+ Kernel support for Mentor Graphics silicon dual role USB device.
+endef
+
+$(eval $(call KernelPackage,musb-hdrc))
+
+
+define KernelPackage/nop-usb-xceiv
+ TITLE:=Support for USB OTG NOP transceiver
+ KCONFIG:= \
+ CONFIG_NOP_USB_XCEIV
+ DEPENDS:=@TARGET_omap24xx
+ FILES:=$(LINUX_DIR)/drivers/usb/otg/nop-usb-xceiv.ko
+ AUTOLOAD:=$(call AutoLoad,45,nop-usb-xceiv)
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/nop-usb-xceiv/description
+ Support for USB OTG NOP transceiver
+endef
+
+$(eval $(call KernelPackage,nop-usb-xceiv))
+
+
+define KernelPackage/tusb6010
+ TITLE:=Support for TUSB 6010
+ KCONFIG:= \
+ CONFIG_USB_MUSB_TUSB6010 \
+ CONFIG_USB_TUSB6010=y
+ DEPENDS:=+kmod-musb-hdrc +kmod-nop-usb-xceiv
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/tusb6010/description
+ TUSB6010 support
+endef
+
+$(eval $(call KernelPackage,tusb6010))
+
+
+define KernelPackage/usb-tahvo
+ TITLE:=Support for Tahvo (Nokia n810) USB
+ KCONFIG:= \
+ CONFIG_CBUS_TAHVO_USB \
+ CONFIG_CBUS_TAHVO_USB_HOST_BY_DEFAULT=n \
+ CONFIG_USB_OHCI_HCD_OMAP1=y \
+ CONFIG_USB_GADGET_DEBUG_FS=n
+ DEPENDS:=@TARGET_omap24xx +kmod-tusb6010 +kmod-usb-gadget
+ FILES:=$(LINUX_DIR)/drivers/cbus/tahvo-usb.ko
+ AUTOLOAD:=$(call AutoLoad,45,tahvo-usb)
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-tahvo/description
+ Kernel support for Nokia n810 USB OHCI controller.
+endef
+
+$(eval $(call KernelPackage,usb-tahvo))
+
+
define KernelPackage/usb-isp116x-hcd
TITLE:=Support for the ISP116x USB Host Controller
DEPENDS:=@TARGET_ppc40x
define KernelPackage/usb2
TITLE:=Support for USB2 controllers
+ DEPENDS:=+TARGET_brcm47xx:kmod-usb-brcm47xx
KCONFIG:=CONFIG_USB_EHCI_HCD \
- CONFIG_USB_EHCI_AR71XX=y
+ CONFIG_USB_EHCI_ATH79=y \
+ CONFIG_USB_EHCI_BCM63XX=y \
+ CONFIG_USB_EHCI_RT3883=y \
+ CONFIG_USB_OCTEON_EHCI=y \
+ CONFIG_USB_EHCI_FSL=n
FILES:=$(LINUX_DIR)/drivers/usb/host/ehci-hcd.ko
AUTOLOAD:=$(call AutoLoad,40,ehci-hcd,1)
$(call AddDepends/usb)
CONFIG_SND_USB_AUDIO
$(call AddDepends/usb)
$(call AddDepends/sound)
-ifeq ($(strip $(call CompareKernelPatchVer,$(KERNEL_PATCHVER),ge,2.6.35)),1)
+# For Linux 2.6.35+
+ifneq ($(wildcard $(LINUX_DIR)/sound/usb/snd-usbmidi-lib.ko),)
FILES:= \
$(LINUX_DIR)/sound/usb/snd-usbmidi-lib.ko \
$(LINUX_DIR)/sound/usb/snd-usb-audio.ko
$(call AddDepends/usb-serial)
endef
-define KernelPackage/usb-serial-belkin/description
+define KernelPackage/usb-serial-ch341/description
Kernel support for Winchiphead CH341 USB-to-Serial converters
endef
$(eval $(call KernelPackage,usb-serial-ftdi))
+define KernelPackage/usb-serial-ti-usb
+ TITLE:=Support for TI USB 3410/5052
+ KCONFIG:=CONFIG_USB_SERIAL_TI
+ FILES:=$(LINUX_DIR)/drivers/usb/serial/ti_usb_3410_5052.ko
+ AUTOLOAD:=$(call AutoLoad,65,ti_usb_3410_5052)
+ $(call AddDepends/usb-serial)
+endef
+
+define KernelPackage/usb-serial-ti-usb/description
+ Kernel support for TI USB 3410/5052 devices
+endef
+
+$(eval $(call KernelPackage,usb-serial-ti-usb))
+
+
+define KernelPackage/usb-serial-ipw
+ TITLE:=Support for IPWireless 3G devices
+ KCONFIG:=CONFIG_USB_SERIAL_IPW
+ FILES:=$(LINUX_DIR)/drivers/usb/serial/ipw.ko
+ AUTOLOAD:=$(call AutoLoad,65,ipw)
+ $(call AddDepends/usb-serial)
+endef
+
+$(eval $(call KernelPackage,usb-serial-ipw))
+
+
define KernelPackage/usb-serial-mct
TITLE:=Support for Magic Control Tech. devices
KCONFIG:=CONFIG_USB_SERIAL_MCT_U232
$(eval $(call KernelPackage,usb-serial-mct))
+define KernelPackage/usb-serial-mos7720
+ TITLE:=Support for Moschip MOS7720 devices
+ KCONFIG:=CONFIG_USB_SERIAL_MOS7720
+ FILES:=$(LINUX_DIR)/drivers/usb/serial/mos7720.ko
+ AUTOLOAD:=$(call AutoLoad,65,mos7720)
+ $(call AddDepends/usb-serial)
+endef
+
+define KernelPackage/usb-serial-mos7720/description
+ Kernel support for Moschip MOS7720 USB-to-Serial converters
+endef
+
+$(eval $(call KernelPackage,usb-serial-mos7720))
+
+
define KernelPackage/usb-serial-pl2303
TITLE:=Support for Prolific PL2303 devices
KCONFIG:=CONFIG_USB_SERIAL_PL2303
$(eval $(call KernelPackage,usb-serial-keyspan))
+define KernelPackage/usb-serial-wwan
+ TITLE:=Support for GSM and CDMA modems
+ DEPENDS:= @!LINUX_2_6_30&&!LINUX_2_6_31&&!LINUX_2_6_32
+ KCONFIG:=CONFIG_USB_SERIAL_WWAN
+ FILES:=$(LINUX_DIR)/drivers/usb/serial/usb_wwan.ko
+ AUTOLOAD:=$(call AutoLoad,61,usb_wwan)
+ $(call AddDepends/usb-serial)
+endef
+
+define KernelPackage/usb-serial-wwan/description
+ Kernel support for USB GSM and CDMA modems
+endef
+
+$(eval $(call KernelPackage,usb-serial-wwan))
+
+
define KernelPackage/usb-serial-option
TITLE:=Support for Option HSDPA modems
+ DEPENDS:=+!LINUX_2_6_30&&!LINUX_2_6_31&&!LINUX_2_6_32:kmod-usb-serial-wwan
KCONFIG:=CONFIG_USB_SERIAL_OPTION
FILES:=$(LINUX_DIR)/drivers/usb/serial/option.ko
AUTOLOAD:=$(call AutoLoad,65,option)
$(eval $(call KernelPackage,usb-serial-option))
+define KernelPackage/usb-serial-qualcomm
+ TITLE:=Support for Qualcomm USB serial
+ KCONFIG:=CONFIG_USB_SERIAL_QUALCOMM
+ FILES:=$(LINUX_DIR)/drivers/usb/serial/qcserial.ko
+ AUTOLOAD:=$(call AutoLoad,65,qcserial)
+ $(call AddDepends/usb-serial)
+endef
+
+define KernelPackage/usb-serial-qualcomm/description
+ Kernel support for Qualcomm USB Serial devices (Gobi)
+endef
+
+$(eval $(call KernelPackage,usb-serial-qualcomm))
+
+
define KernelPackage/usb-storage
TITLE:=USB Storage support
- DEPENDS:= +!TARGET_x86:kmod-scsi-core
+ DEPENDS:= +kmod-scsi-core
KCONFIG:=CONFIG_USB_STORAGE
FILES:=$(LINUX_DIR)/drivers/usb/storage/usb-storage.ko
AUTOLOAD:=$(call AutoLoad,60,usb-storage,1)
define KernelPackage/usb-net
TITLE:=Kernel modules for USB-to-Ethernet convertors
- KCONFIG:=CONFIG_USB_USBNET
+ KCONFIG:=CONFIG_USB_USBNET CONFIG_MII=y
AUTOLOAD:=$(call AutoLoad,60,usbnet)
FILES:=$(LINUX_DIR)/drivers/$(USBNET_DIR)/usbnet.ko
$(call AddDepends/usb)
$(eval $(call KernelPackage,usb-net-rndis))
+define KernelPackage/usb-net-sierrawireless
+ TITLE:=Support for Sierra Wireless devices
+ KCONFIG:=CONFIG_USB_SIERRA_NET
+ FILES:=$(LINUX_DIR)/drivers/net/usb/sierra_net.ko
+ AUTOLOAD:=$(call AutoLoad,65,sierra_net)
+ $(call AddDepends/usb-net)
+endef
+
+define KernelPackage/usb-net-sierrawireless/description
+ Kernel support for Sierra Wireless devices
+endef
+
+$(eval $(call KernelPackage,usb-net-sierrawireless))
+
+
+define KernelPackage/usb-net-ipheth
+ TITLE:=Apple iPhone USB Ethernet driver
+ KCONFIG:=CONFIG_USB_IPHETH
+ FILES:=$(LINUX_DIR)/drivers/net/usb/ipheth.ko
+ AUTOLOAD:=$(call AutoLoad,64,ipheth)
+ $(call AddDepends/usb-net)
+endef
+
+define KernelPackage/usb-net-ipheth/description
+ Kernel support for Apple iPhone USB Ethernet driver
+endef
+
+$(eval $(call KernelPackage,usb-net-ipheth))
+
define KernelPackage/usb-hid
TITLE:=Support for USB Human Input Devices
$(eval $(call KernelPackage,usb-phidget))
+define KernelPackage/usb-rt305x-dwc_otg
+ TITLE:=RT305X USB controller driver
+ DEPENDS:=@TARGET_ramips_rt305x
+ KCONFIG:= \
+ CONFIG_DWC_OTG \
+ CONFIG_DWC_OTG_HOST_ONLY=y \
+ CONFIG_DWC_OTG_DEVICE_ONLY=n \
+ CONFIG_DWC_OTG_DEBUG=n
+ FILES:=$(LINUX_DIR)/drivers/usb/dwc_otg/dwc_otg.ko
+ AUTOLOAD:=$(call AutoLoad,54,dwc_otg,1)
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-rt305x-dwc_otg/description
+ This driver provides USB Device Controller support for the
+ Synopsys DesignWare USB OTG Core used in the Ralink RT305X SoCs.
+endef
+
+$(eval $(call KernelPackage,usb-rt305x-dwc_otg))
+
+define KernelPackage/usb-brcm47xx
+ SUBMENU:=$(USB_MENU)
+ TITLE:=Support for USB on bcm47xx
+ DEPENDS:=@USB_SUPPORT @TARGET_brcm47xx
+ KCONFIG:= \
+ CONFIG_USB_HCD_BCMA \
+ CONFIG_USB_HCD_SSB
+ FILES:= \
+ $(LINUX_DIR)/drivers/usb/host/bcma-hcd.ko \
+ $(LINUX_DIR)/drivers/usb/host/ssb-hcd.ko
+ AUTOLOAD:=$(call AutoLoad,19,bcma-hcd ssb-hcd,1)
+ $(call AddDepends/usb)
+endef
+
+$(eval $(call KernelPackage,usb-brcm47xx))
+
projects / openwrt.git / blobdiff