[ar71xx] create firmware image for the RouterStation Pro, and add a profile for it...
[openwrt.git] / target / linux / at91 / patches-2.6.25 / 008-fdl-serial.patch
index 3319901..cf11ac0 100644 (file)
@@ -1,6 +1,6 @@
 --- a/drivers/serial/atmel_serial.c
 +++ b/drivers/serial/atmel_serial.c
-@@ -214,6 +214,34 @@
+@@ -214,6 +214,34 @@ static void atmel_set_mctrl(struct uart_
                                at91_set_gpio_value(AT91_PIN_PA21, 0);
                        else
                                at91_set_gpio_value(AT91_PIN_PA21, 1);
@@ -35,7 +35,7 @@
                }
        }
  #endif
-@@ -251,8 +279,10 @@
+@@ -251,8 +279,10 @@ static u_int atmel_get_mctrl(struct uart
        /*
         * The control signals are active low.
         */
@@ -48,7 +48,7 @@
        if (!(status & ATMEL_US_CTS))
                ret |= TIOCM_CTS;
        if (!(status & ATMEL_US_DSR))
-@@ -260,6 +290,16 @@
+@@ -260,6 +290,16 @@ static u_int atmel_get_mctrl(struct uart
        if (!(status & ATMEL_US_RI))
                ret |= TIOCM_RI;
  
@@ -65,7 +65,7 @@
        return ret;
  }
  
-@@ -453,6 +493,34 @@
+@@ -453,6 +493,34 @@ static void atmel_tx_chars(struct uart_p
  }
  
  /*
   * receive interrupt handler.
   */
  static void
-@@ -815,6 +883,23 @@
+@@ -815,6 +883,23 @@ static int atmel_startup(struct uart_por
                return retval;
        }
  
        /*
         * Initialize DMA (if necessary)
         */
-@@ -834,6 +919,10 @@
+@@ -834,6 +919,10 @@ static int atmel_startup(struct uart_por
                                        kfree(atmel_port->pdc_rx[0].buf);
                                }
                                free_irq(port->irq, port);
                                return -ENOMEM;
                        }
                        pdc->dma_addr = dma_map_single(port->dev,
-@@ -873,7 +962,11 @@
+@@ -873,7 +962,11 @@ static int atmel_startup(struct uart_por
                retval = atmel_open_hook(port);
                if (retval) {
                        free_irq(port->irq, port);
                }
        }
  
-@@ -947,6 +1040,10 @@
+@@ -947,6 +1040,10 @@ static void atmel_shutdown(struct uart_p
         * Free the interrupt
         */
        free_irq(port->irq, port);
This page took 0.064486 seconds and 4 git commands to generate.