wish to enable the 'dmesg' utility.
config BUSYBOX_CONFIG_FEATURE_DMESG_PRETTY
- bool "pretty dmesg output"
+ bool "Pretty dmesg output"
default y
depends on BUSYBOX_CONFIG_DMESG
help
'disk slices' that are defined on a hard drive.
config BUSYBOX_CONFIG_FDISK_SUPPORT_LARGE_DISKS
- bool "support over 4GB disks"
+ bool "Support over 4GB disks"
default y
depends on BUSYBOX_CONFIG_FDISK
help
config BUSYBOX_CONFIG_FEATURE_SUN_LABEL
bool "Support SUN disklabels"
default n
- depends on BUSYBOX_CONFIG_FDISK && BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE
+ depends on BUSYBOX_CONFIG_FDISK && BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE
help
Enabling this option allows you to create or change SUN disklabels.
Most people can safely leave this option disabled.
partition, and similarly evil things. Unless you have a very good
reason you would be wise to leave this disabled.
+config BUSYBOX_CONFIG_FINDFS
+ bool "findfs"
+ default n
+ select BUSYBOX_CONFIG_VOLUMEID
+ help
+ This is similar to the findfs program that is part of the e2fsprogs
+ package. However, the e2fsprogs version only support ext2/3. This
+ version supports those in addition to FAT, swap, and ReiserFS.
+ WARNING:
+ With all submodules selected, it will add ~8k to busybox.
+
config BUSYBOX_CONFIG_FREERAMDISK
bool "freeramdisk"
default n
this utility will do the job for you.
comment "Minix filesystem support"
- depends on BUSYBOX_CONFIG_FSCK_MINIX || BUSYBOX_CONFIG_MKFS_MINIX
+ depends on BUSYBOX_CONFIG_FSCK_MINIX || BUSYBOX_CONFIG_MKFS_MINIX
config BUSYBOX_CONFIG_FEATURE_MINIX2
bool "Support Minix fs v2 (fsck_minix/mkfs_minix)"
The hexdump utility is used to display binary data in a readable
way that is comparable to the output from most hex editors.
+config BUSYBOX_CONFIG_FEATURE_HEXDUMP_REVERSE
+ bool "Support -R, reverse of 'hexdump -Cv'"
+ default n
+ depends on BUSYBOX_CONFIG_HEXDUMP
+ help
+ The hexdump utility is used to display binary data in an ascii
+ readable way. This option creates binary data from an ascii input.
+ NB: this option is non-standard. It's unwise to use it in scripts
+ aimed to be portable.
+
+config BUSYBOX_CONFIG_HD
+ bool "hd"
+ default n
+ select BUSYBOX_CONFIG_HEXDUMP
+ help
+ hd is an alias to hexdump -C.
+
config BUSYBOX_CONFIG_HWCLOCK
bool "hwclock"
- default n
+ default y
help
The hwclock utility is used to read and set the hardware clock
on a system. This is primarily used to set the current time on
config BUSYBOX_CONFIG_MDEV
bool "mdev"
- default y
+ default n
help
- mdev is a mini-udev implementation: call it with -s to populate
- /dev from /sys, then "echo /sbin/mdev > /proc/sys/kernel/hotplug" to
- have it handle hotplug events afterwards. Device names are taken
- from sysfs.
+ mdev is a mini-udev implementation for dynamically creating device
+ nodes in the /dev directory.
+
+ For more information, please see docs/mdev.txt
config BUSYBOX_CONFIG_FEATURE_MDEV_CONF
bool "Support /etc/mdev.conf"
- default y
+ default n
depends on BUSYBOX_CONFIG_MDEV
help
- The mdev config file contains lines that look like:
+ Add support for the mdev config file to control ownership and
+ permissions of the device nodes.
- hd[a-z][0-9]* 0:3 660
+ For more information, please see docs/mdev.txt
+
+config BUSYBOX_CONFIG_FEATURE_MDEV_RENAME
+ bool "Support subdirs/symlinks"
+ default n
+ depends on BUSYBOX_CONFIG_FEATURE_MDEV_CONF
+ help
+ Add support for renaming devices and creating symlinks.
- That's device name (with regex match), uid:gid, and permissions.
+ For more information, please see docs/mdev.txt
- Config file parsing stops on the first matching line. If no config
- entry is matched, devices are created with default 0:0 660. (Make
- the last line match .* to override this.)
+config BUSYBOX_CONFIG_FEATURE_MDEV_RENAME_REGEXP
+ bool "Support regular expressions substitutions when renaming device"
+ default n
+ depends on BUSYBOX_CONFIG_FEATURE_MDEV_RENAME
+ help
+ Add support for regular expressions substitutions when renaming device.
config BUSYBOX_CONFIG_FEATURE_MDEV_EXEC
bool "Support command execution at device addition/removal"
default n
depends on BUSYBOX_CONFIG_FEATURE_MDEV_CONF
help
- This adds support for an optional field to /etc/mdev.conf, consisting
- of a special character and a command line to run after creating the
- corresponding device(s) and before removing, ala:
-
- hdc root:cdrom 660 *ln -s $MDEV cdrom
+ This adds support for an optional field to /etc/mdev.conf for
+ executing commands when devices are created/removed.
- The $MDEV environment variable is set to the name of the device.
+ For more information, please see docs/mdev.txt
- The special characters and their meanings are:
- @ Run after creating the device.
- $ Run before removing the device.
- * Run both after creating and before removing the device.
+config BUSYBOX_CONFIG_FEATURE_MDEV_LOAD_FIRMWARE
+ bool "Support loading of firmwares"
+ default n
+ depends on BUSYBOX_CONFIG_MDEV
+ help
+ Some devices need to load firmware before they can be usable.
- Commands are executed via system() so you need /bin/sh, meaning you
- probably want to select a default shell in the Shells menu.
+ These devices will request userspace look up the files in
+ /lib/firmware/ and if it exists, send it to the kernel for
+ loading into the hardware.
config BUSYBOX_CONFIG_MKSWAP
bool "mkswap"
the swap space using the 'swapon' utility.
config BUSYBOX_CONFIG_FEATURE_MKSWAP_V0
- bool "version 0 support"
+ bool "Version 0 support"
default n
depends on BUSYBOX_CONFIG_MKSWAP
# depends on MKSWAP && BUSYBOX_CONFIG_DEPRECATED
config BUSYBOX_CONFIG_FEATURE_USE_TERMIOS
bool "Use termios to manipulate the screen"
default n
- depends on BUSYBOX_CONFIG_MORE
+ depends on BUSYBOX_CONFIG_MORE || BUSYBOX_CONFIG_TOP
help
This option allows utilities such as 'more' and 'top' to determine
the size of the screen. If you leave this disabled, your utilities
will be unable to determine the current screen size, and will be
unable to move the cursor.
+config BUSYBOX_CONFIG_VOLUMEID
+ bool "Routines for detecting label and uuid on common filesystems"
+ default n
+ help
+ TODO
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_EXT
+ bool "Ext filesystem"
+ default n
+ depends on BUSYBOX_CONFIG_VOLUMEID
+ help
+ TODO
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_REISERFS
+ bool "Reiser filesystem"
+ default n
+ depends on BUSYBOX_CONFIG_VOLUMEID
+ help
+ TODO
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_FAT
+ bool "fat filesystem"
+ default n
+ depends on BUSYBOX_CONFIG_VOLUMEID
+ help
+ TODO
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_HFS
+ bool "hfs filesystem"
+ default n
+ depends on BUSYBOX_CONFIG_VOLUMEID
+ help
+ TODO
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_JFS
+ bool "jfs filesystem"
+ default n
+ depends on BUSYBOX_CONFIG_VOLUMEID
+ help
+ TODO
+
+### config FEATURE_VOLUMEID_UFS
+### bool "ufs filesystem"
+### default n
+### depends on VOLUMEID
+### help
+### TODO
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_XFS
+ bool "xfs filesystem"
+ default n
+ depends on BUSYBOX_CONFIG_VOLUMEID
+ help
+ TODO
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_NTFS
+ bool "ntfs filesystem"
+ default n
+ depends on BUSYBOX_CONFIG_VOLUMEID
+ help
+ TODO
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_ISO9660
+ bool "iso9660 filesystem"
+ default n
+ depends on BUSYBOX_CONFIG_VOLUMEID
+ help
+ TODO
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_UDF
+ bool "udf filesystem"
+ default n
+ depends on BUSYBOX_CONFIG_VOLUMEID
+ help
+ TODO
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_LUKS
+ bool "luks filesystem"
+ default n
+ depends on BUSYBOX_CONFIG_VOLUMEID
+ help
+ TODO
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_LINUXSWAP
+ bool "linux swap filesystem"
+ default n
+ depends on BUSYBOX_CONFIG_VOLUMEID
+ help
+ TODO
+
+### config FEATURE_VOLUMEID_LVM
+### bool "lvm"
+### default n
+### depends on VOLUMEID
+### help
+### TODO
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_CRAMFS
+ bool "cramfs filesystem"
+ default n
+ depends on BUSYBOX_CONFIG_VOLUMEID
+ help
+ TODO
+
+### config FEATURE_VOLUMEID_HPFS
+### bool "hpfs filesystem"
+### default n
+### depends on VOLUMEID
+### help
+### TODO
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_ROMFS
+ bool "romfs filesystem"
+ default n
+ depends on BUSYBOX_CONFIG_VOLUMEID
+ help
+ TODO
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_SYSV
+ bool "sysv filesystem"
+ default n
+ depends on BUSYBOX_CONFIG_VOLUMEID
+ help
+ TODO
+
+### config FEATURE_VOLUMEID_MINIX
+### bool "minix filesystem"
+### default n
+### depends on VOLUMEID
+### help
+### TODO
+
+### These only detect partition tables - not used (yet?)
+### config FEATURE_VOLUMEID_MAC
+### bool "mac filesystem"
+### default n
+### depends on VOLUMEID
+### help
+### TODO
+###
+### config FEATURE_VOLUMEID_MSDOS
+### bool "msdos filesystem"
+### default n
+### depends on VOLUMEID
+### help
+### TODO
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_OCFS2
+ bool "ocfs2 filesystem"
+ default n
+ depends on BUSYBOX_CONFIG_VOLUMEID
+ help
+ TODO
+
+### config FEATURE_VOLUMEID_HIGHPOINTRAID
+### bool "highpoint raid"
+### default n
+### depends on VOLUMEID
+### help
+### TODO
+
+### config FEATURE_VOLUMEID_ISWRAID
+### bool "intel raid"
+### default n
+### depends on VOLUMEID
+### help
+### TODO
+
+### config FEATURE_VOLUMEID_LSIRAID
+### bool "lsi raid"
+### default n
+### depends on VOLUMEID
+### help
+### TODO
+
+### config FEATURE_VOLUMEID_VIARAID
+### bool "via raid"
+### default n
+### depends on VOLUMEID
+### help
+### TODO
+
+### config FEATURE_VOLUMEID_SILICONRAID
+### bool "silicon raid"
+### default n
+### depends on VOLUMEID
+### help
+### TODO
+
+### config FEATURE_VOLUMEID_NVIDIARAID
+### bool "nvidia raid"
+### default n
+### depends on VOLUMEID
+### help
+### TODO
+
+### config FEATURE_VOLUMEID_PROMISERAID
+### bool "promise raid"
+### default n
+### depends on VOLUMEID
+### help
+### TODO
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_LINUXRAID
+ bool "linuxraid"
+ default n
+ depends on BUSYBOX_CONFIG_VOLUMEID
+ help
+ TODO
+
config BUSYBOX_CONFIG_MOUNT
bool "mount"
default y
NFS filesystems. Most people using BusyBox will also want to enable
the 'mount' utility.
+config BUSYBOX_CONFIG_FEATURE_MOUNT_FAKE
+ bool "Support option -f"
+ default n
+ depends on BUSYBOX_CONFIG_MOUNT
+ help
+ Enable support for faking a file system mount.
+
+config BUSYBOX_CONFIG_FEATURE_MOUNT_VERBOSE
+ bool "Support option -v"
+ default n
+ depends on BUSYBOX_CONFIG_MOUNT
+ help
+ Enable multi-level -v[vv...] verbose messages. Useful if you
+ debug mount problems and want to see what is exactly passed
+ to the kernel.
+
+config BUSYBOX_CONFIG_FEATURE_MOUNT_HELPERS
+ bool "Support mount helpers"
+ default n
+ depends on BUSYBOX_CONFIG_MOUNT
+ help
+ Enable mounting of virtual file systems via external helpers.
+ E.g. "mount obexfs#-b00.11.22.33.44.55 /mnt" will in effect call
+ "obexfs -b00.11.22.33.44.55 /mnt"
+ Also "mount -t sometype [-o opts] fs /mnt" will try
+ "sometype [-o opts] fs /mnt" if simple mount syscall fails.
+ The idea is to use such virtual filesystems in /etc/fstab.
+
+config BUSYBOX_CONFIG_FEATURE_MOUNT_LABEL
+ bool "Support specifiying devices by label or UUID"
+ default n
+ depends on BUSYBOX_CONFIG_MOUNT
+ select BUSYBOX_CONFIG_VOLUMEID
+ help
+ This allows for specifying a device by label or uuid, rather than by
+ name. This feature utilizes the same functionality as findfs.
+
config BUSYBOX_CONFIG_FEATURE_MOUNT_NFS
bool "Support mounting NFS file systems"
default y
depends on BUSYBOX_CONFIG_MOUNT
- depends on BUSYBOX_CONFIG_FEATURE_HAVE_RPC
+ select BUSYBOX_CONFIG_FEATURE_HAVE_RPC
select BUSYBOX_CONFIG_FEATURE_SYSLOG
help
Enable mounting of NFS file systems.
help
This allows you to parse /proc/profile for basic profiling.
+config BUSYBOX_CONFIG_RTCWAKE
+ bool "rtcwake"
+ default n
+ help
+ Enter a system sleep state until specified wakeup time.
+
+config BUSYBOX_CONFIG_SCRIPT
+ bool "script"
+ default n
+ help
+ The script makes typescript of terminal session.
+
config BUSYBOX_CONFIG_SETARCH
bool "setarch"
default n
space. If you are not using any swap space, you can leave this
option disabled.
+config BUSYBOX_CONFIG_FEATURE_SWAPON_PRI
+ bool "Support priority option -p"
+ default n
+ depends on BUSYBOX_CONFIG_SWAPONOFF
+ help
+ Enable support for setting swap device priority in swapon.
+
config BUSYBOX_CONFIG_SWITCH_ROOT
bool "switch_root"
default y
also want to enable 'umount'.
config BUSYBOX_CONFIG_FEATURE_UMOUNT_ALL
- bool "umount -a option"
+ bool "Support option -a"
default y
depends on BUSYBOX_CONFIG_UMOUNT
help
The umount command will also free that loopback device.
You can still use the 'losetup' utility (to manually associate files
- with loop devices) if you need to do something advanced, such as
+ with loop devices) if you need to do something advanced, such as
specify an offset or cryptographic options to the loopback device.
(If you don't want umount to free the loop device, use "umount -D".)
bool "Support for the old /etc/mtab file"
default n
depends on BUSYBOX_CONFIG_MOUNT || BUSYBOX_CONFIG_UMOUNT
+ select BUSYBOX_CONFIG_FEATURE_MOUNT_FAKE
help
Historically, Unix systems kept track of the currently mounted
partitions in the file "/etc/mtab". These days, the kernel exports
your kernel.
endmenu
-
projects / openwrt.git / blobdiff