ooops, m4 is already part of the host tools

[openwrt.git] / target / linux / ifxmips / patches / 100-board.patch

diff --git a/target/linux/ifxmips/patches/100-board.patch b/target/linux/ifxmips/patches/100-board.patch
index db43c90..052a08a 100644 (file)
--- a/target/linux/ifxmips/patches/100-board.patch
+++ b/target/linux/ifxmips/patches/100-board.patch
@@ -1,6 +1,6 @@
 --- a/arch/mips/Kconfig
 +++ b/arch/mips/Kconfig
 --- a/arch/mips/Kconfig
 +++ b/arch/mips/Kconfig

-@@ -78,6 +78,21 @@
+@@ -78,6 +78,23 @@ config MIPS_COBALT

        select SYS_SUPPORTS_LITTLE_ENDIAN
        select GENERIC_HARDIRQS_NO__DO_IRQ
  
        select SYS_SUPPORTS_LITTLE_ENDIAN
        select GENERIC_HARDIRQS_NO__DO_IRQ
  


@@ -11,9 +11,11 @@
 +      select CEVT_R4K
 +      select CSRC_R4K
 +      select SYS_HAS_CPU_MIPS32_R1
 +      select CEVT_R4K
 +      select CSRC_R4K
 +      select SYS_HAS_CPU_MIPS32_R1

++      select SYS_HAS_CPU_MIPS32_R2

 +      select HAVE_STD_PC_SERIAL_PORT
 +      select SYS_SUPPORTS_BIG_ENDIAN
 +      select SYS_SUPPORTS_32BIT_KERNEL
 +      select HAVE_STD_PC_SERIAL_PORT
 +      select SYS_SUPPORTS_BIG_ENDIAN
 +      select SYS_SUPPORTS_32BIT_KERNEL

++      select SYS_SUPPORTS_MULTITHREADING

 +      select SYS_HAS_EARLY_PRINTK
 +      select HW_HAS_PCI
 +      select GENERIC_GPIO
 +      select SYS_HAS_EARLY_PRINTK
 +      select HW_HAS_PCI
 +      select GENERIC_GPIO


@@ -22,7 +24,7 @@
  config MACH_DECSTATION
        bool "DECstations"
        select BOOT_ELF32
  config MACH_DECSTATION
        bool "DECstations"
        select BOOT_ELF32

-@@ -697,6 +712,7 @@
+@@ -697,6 +714,7 @@ source "arch/mips/sibyte/Kconfig"

  source "arch/mips/tx4927/Kconfig"
  source "arch/mips/tx4938/Kconfig"
  source "arch/mips/vr41xx/Kconfig"
  source "arch/mips/tx4927/Kconfig"
  source "arch/mips/tx4938/Kconfig"
  source "arch/mips/vr41xx/Kconfig"


@@ -32,7 +34,7 @@
  
 --- a/arch/mips/Makefile
 +++ b/arch/mips/Makefile
  
 --- a/arch/mips/Makefile
 +++ b/arch/mips/Makefile

-@@ -283,6 +283,13 @@
+@@ -283,6 +283,13 @@ cflags-$(CONFIG_MIPS_COBALT)      += -Iinclud

  load-$(CONFIG_MIPS_COBALT)    += 0xffffffff80080000
  
  #
  load-$(CONFIG_MIPS_COBALT)    += 0xffffffff80080000
  
  #


@@ -61,19 +63,9 @@
  #define CL_SIZE                       COMMAND_LINE_SIZE
  
  extern char *system_type;
  #define CL_SIZE                       COMMAND_LINE_SIZE
  
  extern char *system_type;

---- a/arch/mips/kernel/traps.c
-+++ b/arch/mips/kernel/traps.c
-@@ -1464,6 +1464,7 @@
-        */
-       if (cpu_has_mips_r2) {
-               cp0_compare_irq = (read_c0_intctl() >> 29) & 7;
-+              cp0_compare_irq = CP0_LEGACY_COMPARE_IRQ;
-               cp0_perfcount_irq = (read_c0_intctl() >> 26) & 7;
-               if (cp0_perfcount_irq == cp0_compare_irq)
-                       cp0_perfcount_irq = -1;

 --- a/arch/mips/pci/Makefile
 +++ b/arch/mips/pci/Makefile
 --- a/arch/mips/pci/Makefile
 +++ b/arch/mips/pci/Makefile

-@@ -48,3 +48,4 @@
+@@ -48,3 +48,4 @@ obj-$(CONFIG_TOSHIBA_RBTX4938)       += fixup-

  obj-$(CONFIG_VICTOR_MPC30X)   += fixup-mpc30x.o
  obj-$(CONFIG_ZAO_CAPCELLA)    += fixup-capcella.o
  obj-$(CONFIG_WR_PPMC)         += fixup-wrppmc.o
  obj-$(CONFIG_VICTOR_MPC30X)   += fixup-mpc30x.o
  obj-$(CONFIG_ZAO_CAPCELLA)    += fixup-capcella.o
  obj-$(CONFIG_WR_PPMC)         += fixup-wrppmc.o