/*
- * OHCI HCD (Host Controller Driver) for USB.
+ * ADM5120 HCD (Host Controller Driver) for USB
*
- * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
- * (C) Copyright 2000-2004 David Brownell <dbrownell@users.sourceforge.net>
+ * Copyright (C) 2007,2008 Gabor Juhos <juhosg at openwrt.org>
*
- * [ Initialisation is based on Linus' ]
- * [ uhci code and gregs ahcd fragments ]
- * [ (C) Copyright 1999 Linus Torvalds ]
- * [ (C) Copyright 1999 Gregory P. Smith]
+ * This file was derived from: drivers/usb/host/ohci-hcd.c
+ * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
+ * (C) Copyright 2000-2004 David Brownell <dbrownell@users.sourceforge.net>
*
+ * [ Initialisation is based on Linus' ]
+ * [ uhci code and gregs ahcd fragments ]
+ * [ (C) Copyright 1999 Linus Torvalds ]
+ * [ (C) Copyright 1999 Gregory P. Smith]
*
- * OHCI is the main "non-Intel/VIA" standard for USB 1.1 host controller
- * interfaces (though some non-x86 Intel chips use it). It supports
- * smarter hardware than UHCI. A download link for the spec available
- * through the http://www.usb.org website.
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
*
- * This file is licenced under the GPL.
*/
#include <linux/module.h>
#include "../core/hcd.h"
#include "../core/hub.h"
-#define DRIVER_VERSION "v0.01"
+#define DRIVER_VERSION "0.16.3"
#define DRIVER_AUTHOR "Gabor Juhos <juhosg at openwrt.org>"
#define DRIVER_DESC "ADMtek USB 1.1 Host Controller Driver"
/*-------------------------------------------------------------------------*/
-#define ADMHC_VERBOSE_DEBUG /* not always helpful */
-#undef LATE_ED_SCHEDULE
+#undef ADMHC_VERBOSE_DEBUG /* not always helpful */
/* For initializing controller (mask in an HCFS mode too) */
#define OHCI_CONTROL_INIT OHCI_CTRL_CBSR
static int admhc_init(struct admhcd *ahcd);
static void admhc_stop(struct usb_hcd *hcd);
-#include "adm5120-hub.c"
#include "adm5120-dbg.c"
#include "adm5120-mem.c"
+#include "adm5120-pm.c"
+#include "adm5120-hub.c"
#include "adm5120-q.c"
/*-------------------------------------------------------------------------*/
struct ed *ed;
struct urb_priv *urb_priv;
unsigned int pipe = urb->pipe;
- int i, td_cnt = 0;
+ int td_cnt = 0;
unsigned long flags;
- int retval = 0;
+ int ret = 0;
#ifdef ADMHC_VERBOSE_DEBUG
- urb_print(urb, "ENQ", usb_pipein(pipe));
+ spin_lock_irqsave(&ahcd->lock, flags);
+ urb_print(ahcd, urb, "ENQEUE", usb_pipein(pipe));
+ spin_unlock_irqrestore(&ahcd->lock, flags);
#endif
/* every endpoint has an ed, locate and maybe (re)initialize it */
/* number of packets from URB */
td_cnt = urb->number_of_packets;
break;
- default:
- /* paranoia */
- admhc_err(ahcd, "bad EP type %d", ed->type);
- return -EINVAL;
}
urb_priv = urb_priv_alloc(ahcd, td_cnt, mem_flags);
spin_lock_irqsave(&ahcd->lock, flags);
/* don't submit to a dead HC */
if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) {
- retval = -ENODEV;
+ ret = -ENODEV;
goto fail;
}
if (!HC_IS_RUNNING(hcd->state)) {
- retval = -ENODEV;
+ ret = -ENODEV;
goto fail;
}
spin_unlock(&urb->lock);
urb->hcpriv = urb_priv;
finish_urb(ahcd, urb);
- retval = 0;
+ ret = 0;
goto fail;
}
/* schedule the ed if needed */
if (ed->state == ED_IDLE) {
-#ifndef LATE_ED_SCHEDULE
- retval = ed_schedule(ahcd, ed);
- if (retval < 0)
+ ret = ed_schedule(ahcd, ed);
+ if (ret < 0)
goto fail0;
-#endif
+
if (ed->type == PIPE_ISOCHRONOUS) {
u16 frame = admhc_frame_no(ahcd);
urb->hcpriv = urb_priv;
td_submit_urb(ahcd, urb);
-#ifdef LATE_ED_SCHEDULE
- if (ed->state == ED_IDLE)
- retval = ed_schedule(ahcd, ed);
-#endif
-
+#ifdef ADMHC_VERBOSE_DEBUG
admhc_dump_ed(ahcd, "admhc_urb_enqueue", urb_priv->ed, 1);
+#endif
fail0:
spin_unlock(&urb->lock);
fail:
- if (retval)
+ if (ret)
urb_priv_free(ahcd, urb_priv);
spin_unlock_irqrestore(&ahcd->lock, flags);
- return retval;
+ return ret;
}
/*
*/
static int admhc_urb_dequeue(struct usb_hcd *hcd, struct urb *urb)
{
- struct admhcd *ahcd = hcd_to_admhcd(hcd);
- unsigned long flags;
+ struct admhcd *ahcd = hcd_to_admhcd(hcd);
+ unsigned long flags;
+
+ spin_lock_irqsave(&ahcd->lock, flags);
#ifdef ADMHC_VERBOSE_DEBUG
- urb_print(urb, "DEQ", 1);
+ urb_print(ahcd, urb, "DEQUEUE", 1);
#endif
- spin_lock_irqsave(&ahcd->lock, flags);
if (HC_IS_RUNNING(hcd->state)) {
struct urb_priv *urb_priv;
* including ED memory, dummy TD, and bulk/intr data toggle
*/
-static void
-admhc_endpoint_disable(struct usb_hcd *hcd, struct usb_host_endpoint *ep)
+static void admhc_endpoint_disable(struct usb_hcd *hcd,
+ struct usb_host_endpoint *ep)
{
struct admhcd *ahcd = hcd_to_admhcd(hcd);
unsigned long flags;
#ifdef ADMHC_VERBOSE_DEBUG
spin_lock_irqsave(&ahcd->lock, flags);
- admhc_dump_ed(ahcd, "ep_disable", ed, 1);
+ admhc_dump_ed(ahcd, "EP-DISABLE", ed, 1);
spin_unlock_irqrestore(&ahcd->lock, flags);
#endif
td_free(ahcd, ed->dummy);
break;
}
+
ep->hcpriv = NULL;
+
spin_unlock_irqrestore(&ahcd->lock, flags);
return;
}
-static int admhc_get_frame(struct usb_hcd *hcd)
+static int admhc_get_frame_number(struct usb_hcd *hcd)
{
struct admhcd *ahcd = hcd_to_admhcd(hcd);
/* Read the number of ports unless overridden */
if (ahcd->num_ports == 0)
- ahcd->num_ports = admhc_get_rhdesc(ahcd) & ADMHC_RH_NUMP;
+ ahcd->num_ports = admhc_read_rhdesc(ahcd) & ADMHC_RH_NUMP;
ret = admhc_mem_init(ahcd);
if (ret)
admhc_dbg(ahcd, "fminterval delta %d\n",
ahcd->fminterval - FI);
ahcd->fminterval |=
- (FSLDP (ahcd->fminterval) << ADMHC_SFI_FSLDP_SHIFT);
+ (FSLDP(ahcd->fminterval) << ADMHC_SFI_FSLDP_SHIFT);
/* also: power/overcurrent flags in rhdesc */
}
admhc_writel_flush(ahcd);
msleep(temp);
- temp = admhc_get_rhdesc(ahcd);
+ temp = admhc_read_rhdesc(ahcd);
if (!(temp & ADMHC_RH_NPS)) {
/* power down each port */
for (temp = 0; temp < ahcd->num_ports; temp++)
- admhc_writel(ahcd, ADMHC_PS_CPP,
- &ahcd->regs->portstatus[temp]);
+ admhc_write_portstatus(ahcd, temp, ADMHC_PS_CPP);
}
/* flush those writes */
admhc_writel_flush(ahcd);
/* 2msec timelimit here means no irqs/preempt */
spin_lock_irq(&ahcd->lock);
-retry:
admhc_writel(ahcd, ADMHC_CTRL_SR, &ahcd->regs->gencontrol);
temp = 30; /* ... allow extra time */
while ((admhc_readl(ahcd, &ahcd->regs->gencontrol) & ADMHC_CTRL_SR) != 0) {
admhc_err(ahcd, "USB HC reset timed out!\n");
return -1;
}
- udelay (1);
+ udelay(1);
}
/* enable HOST mode, before access any host specific register */
admhc_usb_reset(ahcd);
}
+ if (ints & ADMHC_INTR_BABI) {
+ admhc_intr_disable(ahcd, ADMHC_INTR_BABI);
+ admhc_intr_ack(ahcd, ADMHC_INTR_BABI);
+ admhc_err(ahcd, "Babble Detected\n");
+ }
+
if (ints & ADMHC_INTR_INSM) {
admhc_vdbg(ahcd, "Root Hub Status Change\n");
ahcd->next_statechange = jiffies + STATECHANGE_DELAY;
admhc_vdbg(ahcd, "Schedule Overrun\n");
}
- if (ints & ADMHC_INTR_BABI) {
- admhc_intr_disable(ahcd, ADMHC_INTR_BABI);
- admhc_intr_ack(ahcd, ADMHC_INTR_BABI);
- admhc_err(ahcd, "Babble Detected\n");
- }
-
#if 1
spin_lock(&ahcd->lock);
if (ahcd->ed_rm_list)
/*-------------------------------------------------------------------------*/
-/* must not be called from interrupt context */
-
-#ifdef CONFIG_PM
-
-static int admhc_restart(struct admhcd *ahcd)
-{
- int temp;
- int i;
- struct urb_priv *priv;
-
- /* mark any devices gone, so they do nothing till khubd disconnects.
- * recycle any "live" eds/tds (and urbs) right away.
- * later, khubd disconnect processing will recycle the other state,
- * (either as disconnect/reconnect, or maybe someday as a reset).
- */
- spin_lock_irq(&ahcd->lock);
- admhc_disable(ahcd);
- usb_root_hub_lost_power(admhcd_to_hcd(ahcd)->self.root_hub);
- if (!list_empty(&ahcd->pending))
- admhc_dbg(ahcd, "abort schedule...\n");
- list_for_each_entry (priv, &ahcd->pending, pending) {
- struct urb *urb = priv->td[0]->urb;
- struct ed *ed = priv->ed;
-
- switch (ed->state) {
- case ED_OPER:
- ed->state = ED_UNLINK;
- ed->hwINFO |= cpu_to_hc32(ahcd, ED_DEQUEUE);
- ed_deschedule (ahcd, ed);
-
- ed->ed_next = ahcd->ed_rm_list;
- ed->ed_prev = NULL;
- ahcd->ed_rm_list = ed;
- /* FALLTHROUGH */
- case ED_UNLINK:
- break;
- default:
- admhc_dbg(ahcd, "bogus ed %p state %d\n",
- ed, ed->state);
- }
-
- spin_lock(&urb->lock);
- urb->status = -ESHUTDOWN;
- spin_unlock(&urb->lock);
- }
- finish_unlinks (ahcd, 0);
- spin_unlock_irq(&ahcd->lock);
-
- /* paranoia, in case that didn't work: */
-
- /* empty the interrupt branches */
- for (i = 0; i < NUM_INTS; i++) ahcd->load[i] = 0;
- for (i = 0; i < NUM_INTS; i++) ahcd->hcca->int_table[i] = 0;
-
- /* no EDs to remove */
- ahcd->ed_rm_list = NULL;
-
- /* empty control and bulk lists */
- ahcd->ed_controltail = NULL;
- ahcd->ed_bulktail = NULL;
-
- if ((temp = admhc_run(ahcd)) < 0) {
- admhc_err(ahcd, "can't restart, %d\n", temp);
- return temp;
- } else {
- /* here we "know" root ports should always stay powered,
- * and that if we try to turn them back on the root hub
- * will respond to CSC processing.
- */
- i = ahcd->num_ports;
- while (i--)
- admhc_writel(ahcd, RH_PS_PSS,
- &ahcd->regs->portstatus[i]);
- admhc_dbg(ahcd, "restart complete\n");
- }
- return 0;
-}
-#endif
-
-/*-------------------------------------------------------------------------*/
-
#ifdef CONFIG_MIPS_ADM5120
#include "adm5120-drv.c"
#define PLATFORM_DRIVER usb_hcd_adm5120_driver
#error "missing bus glue for admhc-hcd"
#endif
-#define DRIVER_INFO DRIVER_DESC " " DRIVER_VERSION
+#define DRIVER_INFO DRIVER_DESC " version " DRIVER_VERSION
static int __init admhc_hcd_mod_init(void)
{
- int retval = 0;
+ int ret = 0;
if (usb_disabled())
return -ENODEV;
sizeof (struct ed), sizeof (struct td));
#ifdef PLATFORM_DRIVER
- retval = platform_driver_register(&PLATFORM_DRIVER);
- if (retval < 0)
+ ret = platform_driver_register(&PLATFORM_DRIVER);
+ if (ret < 0)
goto error_platform;
#endif
- return retval;
+ return ret;
#ifdef PLATFORM_DRIVER
platform_driver_unregister(&PLATFORM_DRIVER);
error_platform:
#endif
- return retval;
+ return ret;
}
module_init(admhc_hcd_mod_init);
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_INFO);
-MODULE_LICENSE("GPL");
+MODULE_VERSION(DRIVER_VERSION);
+MODULE_LICENSE("GPL v2");
projects / openwrt.git / blobdiff