[adm5120] rewrite of memory detection code, should be fix #1909

[openwrt.git] / target / linux / at91-2.6 / patches / 009-fdl-uartinit.patch

diff --git a/target/linux/at91-2.6/patches/009-fdl-uartinit.patch b/target/linux/at91-2.6/patches/009-fdl-uartinit.patch
index 26d7986..f2491f3 100644 (file)
--- a/target/linux/at91-2.6/patches/009-fdl-uartinit.patch
+++ b/target/linux/at91-2.6/patches/009-fdl-uartinit.patch
@@ -1,43 +1,34 @@
-diff -urN linux-2.6.19.2.old/arch/arm/mach-at91rm9200/at91rm9200_devices.c linux-2.6.19.2/arch/arm/mach-at91rm9200/at91rm9200_devices.c
---- linux-2.6.19.2.old/arch/arm/mach-at91rm9200/at91rm9200_devices.c   2007-05-01 13:08:02.000000000 +0200
-+++ linux-2.6.19.2/arch/arm/mach-at91rm9200/at91rm9200_devices.c       2007-05-09 12:59:58.000000000 +0200
-@@ -709,6 +709,10 @@
+--- linux-2.6.21.1.orig/arch/arm/mach-at91/at91rm9200_devices.c        2007-05-28 12:22:29.000000000 +0200
++++ linux-2.6.21.1/arch/arm/mach-at91/at91rm9200_devices.c     2007-05-28 16:44:36.000000000 +0200
+@@ -618,7 +618,6 @@
+ 
+ 
+ #if defined(CONFIG_NEW_LEDS)
+-
+ static struct platform_device at91_leds = {
+       .name           = "at91_leds",
+       .id             = -1,
+@@ -724,6 +723,10 @@
         *  We need to drive the pin manually.  Default is off (RTS is active low).
         */
        at91_set_gpio_output(AT91_PIN_PA21, 1);
-+      at91_set_gpio_output(AT91_PIN_PB6, 1);  /* DTR0 */
-+      at91_set_gpio_output(AT91_PIN_PB7, 1);  /* RI0 */
-+      at91_set_gpio_input(AT91_PIN_PA19, 1);  /* DCD0 */
++      at91_set_gpio_output(AT91_PIN_PB6, 1);  /* DTR0 */
++      at91_set_gpio_output(AT91_PIN_PB7, 1);  /* RI0 */
++      at91_set_gpio_input(AT91_PIN_PA19, 1);  /* DCD0 */
 +      at91_set_deglitch(AT91_PIN_PA19, 1);
  }
  
  static struct resource uart1_resources[] = {
-@@ -820,6 +824,12 @@
+@@ -835,6 +838,12 @@
  {
        at91_set_B_periph(AT91_PIN_PA5, 1);             /* TXD3 */
        at91_set_B_periph(AT91_PIN_PA6, 0);             /* RXD3 */
-+      at91_set_B_periph(AT91_PIN_PB0, 0);             /* RTS3 */
-+      at91_set_B_periph(AT91_PIN_PB1, 0);             /* CTS3 */
-+      at91_set_gpio_output(AT91_PIN_PB29, 1); /* DTR0 */
-+      at91_set_gpio_output(AT91_PIN_PB2, 1);  /* RI0 */
-+      at91_set_gpio_input(AT91_PIN_PA24, 1);  /* DCD0 */
++      at91_set_B_periph(AT91_PIN_PB0, 0);   /* RTS3 */
++      at91_set_B_periph(AT91_PIN_PB1, 0);   /* CTS3 */
++      at91_set_gpio_output(AT91_PIN_PB29, 1); /* DTR0 */
++      at91_set_gpio_output(AT91_PIN_PB2, 1);  /* RI0 */
++      at91_set_gpio_input(AT91_PIN_PA24, 1);  /* DCD0 */
 +      at91_set_deglitch(AT91_PIN_PA24, 1);
  }
  
  struct platform_device *at91_uarts[ATMEL_MAX_UART];   /* the UARTs to use */
-diff -urN linux-2.6.19.2.old/arch/arm/mach-at91rm9200/vlink_leds.c linux-2.6.19.2/arch/arm/mach-at91rm9200/vlink_leds.c
---- linux-2.6.19.2.old/arch/arm/mach-at91rm9200/vlink_leds.c   2007-05-01 13:08:03.000000000 +0200
-+++ linux-2.6.19.2/arch/arm/mach-at91rm9200/vlink_leds.c       2007-05-09 12:58:42.000000000 +0200
-@@ -114,12 +114,6 @@
- 
-       at91_set_gpio_input(AT91_PIN_PB8, 1);   // JIGPRESENT
-       at91_set_gpio_input(AT91_PIN_PB22, 1);  // PWR_IND
--      at91_set_gpio_input(AT91_PIN_PA19, 1);  // P1DTR
--      at91_set_gpio_input(AT91_PIN_PA24, 1);  // P2DTR
--      at91_set_gpio_output(AT91_PIN_PB29, 1); // P2DCD
--      at91_set_gpio_output(AT91_PIN_PB2, 1);  // P2RI
--      at91_set_gpio_output(AT91_PIN_PB6, 1);  // P1DCD
--      at91_set_gpio_output(AT91_PIN_PB7, 1);  // P1RI
- 
-       at91_set_gpio_input(AT91_PIN_PB27, 1);  // UDB_CNX
-       at91_set_gpio_output(AT91_PIN_PB28, 1); // UDB_PUP