[brcm63xx] add support for USR9108 LEDs (#9372)

[openwrt.git] / target / linux / rb532 / image / Makefile

diff --git a/target/linux/rb532/image/Makefile b/target/linux/rb532/image/Makefile
index 92984d1..da4baaa 100644 (file)
--- a/target/linux/rb532/image/Makefile
+++ b/target/linux/rb532/image/Makefile
@@ -1,12 +1,11 @@
 # 
-# Copyright (C) 2006 OpenWrt.org
+# Copyright (C) 2006-2010 OpenWrt.org
 #
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
 #
 include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/image.mk
-include $(INCLUDE_DIR)/kernel.mk
 
 LOADADDR = 0x81000000          # RAM start + 16M 
 KERNEL_ENTRY = 0x80101000
@@ -29,33 +28,39 @@ define Image/Prepare
        $(MAKE) -C $(GENERIC_PLATFORM_DIR)/image/lzma-loader $(LOADER_MAKEOPTS) clean compile
 endef
 
+VMLINUX:=$(BIN_DIR)/$(IMG_PREFIX)-vmlinux-kernel
+ifeq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),y)
+       VMLINUX:=$(BIN_DIR)/$(IMG_PREFIX)-vmlinux-initramfs
+endif
+
 define Image/BuildKernel
-       $(CP) $(KDIR)/loader.elf $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-vmlinux
+       $(CP) $(KDIR)/loader.elf $(VMLINUX)
 endef
 
 define Image/cmdline/jffs2-64k
-block2mtd.block2mtd=/dev/cfa2,65536 root=/dev/mtdblock0 rootfstype=jffs2 init=/etc/preinit
+block2mtd.block2mtd=/dev/sda2,65536 root=/dev/mtdblock0 rootfstype=jffs2
 endef
 
 define Image/cmdline/jffs2-128k
-block2mtd.block2mtd=/dev/cfa2,131072 root=/dev/mtdblock0 rootfstype=jffs2 init=/etc/preinit
+block2mtd.block2mtd=/dev/sda2,131072 root=/dev/mtdblock0 rootfstype=jffs2
 endef
 
 define Image/cmdline/ext2
-root=/dev/cfa2 rootfstype=ext2 init=/etc/preinit
+root=/dev/sda2 rootfstype=ext2
 endef
 
 define Image/cmdline/squashfs
-block2mtd.block2mtd=/dev/cfa2,65536 root=/dev/mtdblock0 rootfstype=squashfs init=/etc/preinit
+block2mtd.block2mtd=/dev/sda2,65536 root=/dev/mtdblock0 rootfstype=squashfs
 endef
 
 define Image/cmdline/yaffs2
-root=/dev/mtdblock1 rootfstype=yaffs2 init=/etc/preinit
+root=/dev/mtdblock1 rootfstype=yaffs2
 endef
 
 define Image/Build
-       $(STAGING_DIR_HOST)/bin/patch-cmdline $(KDIR)/vmlinux.elf '$(strip $(call Image/cmdline/$(1))) '
-       ./gen_image.sh $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).bin 4 $(KDIR)/vmlinux.elf $(CONFIG_TARGET_ROOTFS_FSPART) $(KDIR)/root.$(1)
+       $(CP) $(KDIR)/vmlinux.elf $(BIN_DIR)/$(IMG_PREFIX)-$(1).kernel
+       $(STAGING_DIR_HOST)/bin/patch-cmdline $(BIN_DIR)/$(IMG_PREFIX)-$(1).kernel '$(strip $(call Image/cmdline/$(1))) '
+       ./gen_image.sh $(BIN_DIR)/$(IMG_PREFIX)-combined-$(1).bin 4 $(BIN_DIR)/$(IMG_PREFIX)-$(1).kernel $(CONFIG_TARGET_ROOTFS_PARTSIZE) $(KDIR)/root.$(1)
 endef
 
 ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),y)
@@ -64,9 +69,6 @@ ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),y)
        cat $(KDIR)/vmlinux | $(STAGING_DIR_HOST)/bin/lzma e -si -so -eos -lc1 -lp2 -pb2 > $(KDIR)/vmlinux.lzma
        $(MAKE) -C $(GENERIC_PLATFORM_DIR)/image/lzma-loader $(LOADER_MAKEOPTS) clean compile   
   endef
-  define Image/BuildKernel
-       $(CP) $(KDIR)/loader.elf $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-vmlinux
-  endef
 endif
 
 $(eval $(call BuildImage))