#
-# Copyright (C) 2006 OpenWrt.org
+# Copyright (C) 2006-2011 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/image.mk
-LOADADDR = 0x8108c8f4 # RAM start + 16M
-KERNEL_ENTRY = 0x80100000 # Default kernel entry in arch/mips/Makefile
+LOADADDR = 0x80010000 # RAM start + 16M
+KERNEL_ENTRY = $(LOADADDR) # Newer kernels add a jmp to the kernel_entry at the start of the binary
RAMSIZE = 0x01000000 # 64MB
LOADER_MAKEOPTS= \
-a 1024
endef
+define Image/LimitName16
+$(shell expr substr "$(1)" 1 16)
+endef
+
+define Image/Build/CFE
+ # Generate the tagged image
+ $(STAGING_DIR_HOST)/bin/imagetag -i $(KDIR)/vmlinux.lzma.cfe -f $(KDIR)/root.$(1) \
+ --output $(BIN_DIR)/openwrt-$(4)-$(1)-cfe.bin \
+ --boardid $(2) --chipid $(3) --entry $(KERNEL_ENTRY) \
+ --load-addr $(LOADADDR) --rsa-signature "$(5)" \
+ --info1 "-$(call Image/LimitName16,$(4))" --info2 $(1) \
+ $(6) $(7) $(8) $(9)
+endef
+
+define Image/Build/CFEFIXUP
+ # Generate the tagged image
+ $(STAGING_DIR_HOST)/bin/imagetag -i $(KDIR)/vmlinux.lzma.cfe -f $(KDIR)/root.$(1) \
+ --output $(BIN_DIR)/openwrt-$(5)-$(1)-cfe.bin \
+ --boardid $(2) --chipid $(4) --entry $(KERNEL_ENTRY) \
+ --load-addr $(LOADADDR) --rsa-signature "$(6)" \
+ --info1 "+$(call Image/LimitName16,$(3))" --info2 $(1) \
+ $(7) $(8) $(9) $(10)
+endef
+
+define Image/Build/CFEHW553
+ # Generate the tagged image
+ $(STAGING_DIR_HOST)/bin/imagetag -i $(KDIR)/vmlinux.lzma.cfe -f $(KDIR)/root.$(1) \
+ --output $(BIN_DIR)/openwrt-$(5)-$(1)-cfe.bin \
+ --boardid $(2) --chipid $(3) --entry $(LOADADDR) \
+ --load-addr $(LOADADDR) --tag-version 7 \
+ --block-size 0x20000 --image-offset $(4)
+endef
+
+define Image/Build/CFEAGPF
+ # Generate the tagged image
+ $(STAGING_DIR_HOST)/bin/imagetag -i $(KDIR)/vmlinux.lzma.cfe -f $(KDIR)/root.$(1) \
+ --output $(BIN_DIR)/openwrt-$(5)-$(1)-cfe.bin \
+ --boardid $(2) --chipid $(3) --entry $(LOADADDR) \
+ --load-addr $(LOADADDR) --tag-version 8 \
+ --signature2 IMAGE --block-size 0x20000 \
+ --image-offset $(4) --info1 "-$(call Image/LimitName16,$(5))" --info2 $(1)
+endef
+
+define Image/Build/RG100A
+ # Generate the tagged image
+ $(STAGING_DIR_HOST)/bin/imagetag -i $(KDIR)/vmlinux.lzma.cfe -f $(KDIR)/root.$(1) \
+ --output $(BIN_DIR)/openwrt-$(5)-$(1)-cfe.bin \
+ --boardid $(2) --chipid $(3) --entry $(LOADADDR) \
+ --load-addr $(LOADADDR) --block-size 0x20000 \
+ --image-offset $(4) --info1 "-$(call Image/LimitName16,$(5))" --info2 $(1)
+endef
+
+define Image/Build/RedBoot
+ cp $(KDIR)/vmlinux.elf $(BIN_DIR)/openwrt-$(1)-vmlinux.elf
+ gzip -9 -c $(KDIR)/vmlinux > $(KDIR)/vmlinux.bin.gz
+ $(STAGING_DIR_HOST)/bin/lzma e $(KDIR)/vmlinux $(KDIR)/vmlinux.bin.l7
+ dd if=$(KDIR)/vmlinux.bin.l7 of=$(BIN_DIR)/openwrt-$(1)-vmlinux.lzma bs=65536 conv=sync
+ dd if=$(KDIR)/vmlinux.bin.gz of=$(BIN_DIR)/openwrt-$(1)-vmlinux.gz bs=65536 conv=sync
+endef
+
+define Image/Build/SPW303V
+ # Generate the tagged image
+ $(STAGING_DIR_HOST)/bin/imagetag -i $(KDIR)/vmlinux.lzma.cfe -f $(KDIR)/root.$(1) \
+ --output $(BIN_DIR)/openwrt-$(4)-$(1)-cfe.bin.tmp \
+ --boardid $(2) --chipid $(3) --entry $(KERNEL_ENTRY) \
+ --load-addr $(LOADADDR) --rsa-signature "$(5)" \
+ $(6) $(7) $(8) $(9)
+ # Fix up header
+ $(STAGING_DIR_HOST)/bin/spw303v -i $(BIN_DIR)/openwrt-$(4)-$(1)-cfe.bin.tmp \
+ -o $(BIN_DIR)/openwrt-$(4)-$(1)-cfe-sysupgrade.bin
+ $(STAGING_DIR_HOST)/bin/xorimage -i $(BIN_DIR)/openwrt-$(4)-$(1)-cfe-sysupgrade.bin \
+ -o $(BIN_DIR)/openwrt-$(4)-$(1)-cfe-factory.bin
+ rm -f $(BIN_DIR)/openwrt-$(4)-$(1)-cfe.bin.tmp
+endef
+
+define Image/Build/CFEOLD
+ $(TOPDIR)/scripts/brcmImage.pl -t -p \
+ -b $(2) -c $(3) \
+ -k $(KDIR)/vmlinux.lzma.cfe \
+ -r $(KDIR)/root.$(1) \
+ -o $(BIN_DIR)/openwrt-$(2)-$(1)-cfe.bin
+endef
+
define Build/Clean
$(MAKE) -C lzma-loader clean
endef
define Image/Prepare
+ # Standard LZMA kernel
cat $(KDIR)/vmlinux | $(STAGING_DIR_HOST)/bin/lzma e -si -so -eos -lc1 -lp2 -pb2 > $(KDIR)/vmlinux.lzma
+
+ # CFE is a LZMA nazi! It took me hours to find out the parameters!
+ # Also I think lzma has a bug cause it generates different output depending on
+ # if you use stdin / stdout or not. Use files instead of stdio here, cause
+ # otherwise CFE will complain and not boot the image.
+ $(STAGING_DIR_HOST)/bin/lzma e -d22 -fb64 -a1 $(KDIR)/vmlinux $(KDIR)/vmlinux.lzma.tmp
+
+ # Strip out the length, CFE doesn't like this
+ dd if=$(KDIR)/vmlinux.lzma.tmp of=$(KDIR)/vmlinux.lzma.cfe bs=5 count=1
+ dd if=$(KDIR)/vmlinux.lzma.tmp of=$(KDIR)/vmlinux.lzma.cfe ibs=13 obs=5 skip=1 seek=1 conv=notrunc
+ rm -f $(KDIR)/vmlinux.lzma.tmp
+
+ # Build the LZMA loader
rm -f $(KDIR)/loader.gz
$(MAKE) -C lzma-loader \
BUILD_DIR="$(KDIR)" \
TARGET="$(KDIR)" \
clean install
+
echo -ne "\\x00" >> $(KDIR)/loader.gz
+ rm -f $(KDIR)/fs_mark
+ touch $(KDIR)/fs_mark
+ $(call prepare_generic_squashfs,$(KDIR)/fs_mark)
endef
define Image/Build
- $(STAGING_DIR_HOST)/bin/trx -o $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).trx -f $(KDIR)/loader.gz -f $(KDIR)/vmlinux.lzma $(call trxalign/$(1)) -f $(KDIR)/root.$(1)
+ dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/$(IMG_PREFIX)-root.$(1) bs=128k conv=sync
+ # Various routers
+ $(call Image/Build/CFE,$(1),96345GW2,6345,96345GW2-generic)
+ $(call Image/Build/CFE,$(1),96345GW2,6345,96348GW2-bc221,,--layoutver 5)
+ $(call Image/Build/CFE,$(1),96345GW2,6345,92345GW2-rev,OpenWRT-$(REVISION))
+ $(call Image/Build/CFE,$(1),96348GW,6348,96348GW-generic,,)
+ $(call Image/Build/CFE,$(1),96348R,6348,96348R-generic,,)
+ $(call Image/Build/CFE,$(1),96348GW,6348,96348GW-bc221,,--layoutver 5)
+ $(call Image/Build/CFE,$(1),6338GW,6338,6338GW-generic,,)
+ $(call Image/Build/CFE,$(1),6338W,6338,6338W-generic,,)
+ $(call Image/Build/CFE,$(1),96348GW-11,6348,96348GW-11-gen)
+ $(call Image/Build/CFE,$(1),96348GW-10,6348,96348GW-10-gen)
+
+ # BT Voyager V210_BTR
+ $(call Image/Build/CFE,$(1),V210_BB,6348,BTV210_BTR,,--layoutver 5)
+ # BT Voyager V210_ROI, V210_WB
+ $(call Image/Build/CFE,$(1),V210,6348,BTV210_ROI_WB,,--layoutver 5)
+ # BT Voyager V2091_BTR
+ $(call Image/Build/CFE,$(1),V2091_BB,6348,BTV2091_BTR,,--layoutver 5)
+ # BT Voyager V2091_ROI, V2091_WB
+ $(call Image/Build/CFE,$(1),V2091,6348,BTV2091_ROI_WB,,--layoutver 5)
+ # BT Voyager V220V, V220V_MGCP_BTR
+ $(call Image/Build/CFE,$(1),RTA1052V,6348,BTV220V_MGCP_BTR,,--layoutver 5)
+ # BT Voyager V2110, V2110_AA, V2110_ROI
+ $(call Image/Build/CFE,$(1),V2110,6348,BTV2110,,--layoutver 5)
+ # BT Voyager V2500V, V2500V_SIP_CLUB, V2500V_AA
+ $(call Image/Build/CFE,$(1),V2500V_BB,6348,BTV2500V,,--layoutver 5)
+ # RTA1025W_16 (numerous routers)
+ $(call Image/Build/CFE,$(1),RTA1025W_16,6348,RTA1025W_16,,--layoutver 5)
+ # RTA1320_16M (numerous routers)
+ $(call Image/Build/CFE,$(1),RTA1320_16M,6338,RTA1320_16M,,--layoutver 5)
+ # Tecom GW6000
+ $(call Image/Build/CFEFIXUP,$(1),96348GW,GW6000,6348,GW6000)
+ # Tecom GW6200
+ $(call Image/Build/CFEFIXUP,$(1),96348GW,GW6200,6348,GW6200,$(shell printf '\x99'))
+ # Neufbox4
+ $(call Image/Build/CFE,$(1),96358VW,6358,NEUFBOX4,OpenWRT-$(REVISION))
+ # Comtrend 536, 5621
+ $(call Image/Build/CFEFIXUP,$(1),96348GW-11,CT536_CT5621,6348,CT536_CT5621)
+ # Davolink DV201AMR
+ $(call Image/Build/CFEOLD,$(1),DV201AMR,6348)
+ # USR 9108
+ $(call Image/Build/CFE,$(1),96348GW-A,6348,USR9108)
+ # NetGear DG834GT, DG834PN
+ $(call Image/Build/CFE,$(1),96348GW-10,6348,DG834GT_DG834PN)
+ # Belkin f5d7633
+ $(call Image/Build/CFE,$(1),96348GW-10,6348,F5D7633)
+ # D-Link DSL-2640B, rev B2
+ $(call Image/Build/CFE,$(1),D-4P-W,6348,DSL2640B-B2)
+ # D-Link DSL-2650U
+ $(call Image/Build/CFE,$(1),96358VW2,6358,DSL2650U)
+ # D-Link DSL-2740B/DSL-2741B, rev C2
+ $(call Image/Build/CFEFIXUP,$(1),96358GW,AW4139,6358,DSL274XB-C2)
+ # D-Link DSL-2740B/DSL-2741B, rev C3
+ $(call Image/Build/CFE,$(1),AW4139,6358,DSL274XB-C3)
+ # D-Link DVA-G3810BN/TL
+ $(call Image/Build/CFE,$(1),96358GW,6358,DVAG3810BN)
+
+ # TP-Link TD-8810A, TD-8810B, TD-8811A, TD-8811B
+ $(call Image/Build/CFE,$(1),8L-2M-8M,6338,TP8810_8811)
+ # TP-Link 8900GB
+ $(call Image/Build/CFE,$(1),96348GW-11,6348,TD8900GB,$(shell printf 'PRID\x89\x10\x00\x02'))
+
+ # Sagem F@ST2404
+ $(call Image/Build/CFE,$(1),F@ST2404,6348,F@ST2404-cfe)
+ $(call Image/Build/CFE,$(1),F@ST2404,6348,F@ST2404,OpenWRT-$(REVISION))
+ # Inventel Livebox
+ $(call Image/Build/RedBoot,livebox)
+ # Pirelli Alice Gate VoIP 2 Plus Wi-Fi AGPF-S0
+ $(call Image/Build/CFEAGPF,$(1),AGPF-S0,6358,0x20000,AGV2+W-cfe)
+ $(call Image/Build/CFEAGPF,$(1),AGPF-S0,6358,0x20000,AGV2+W)
+ # Pirelli A226G
+ $(call Image/Build/CFEAGPF,$(1),DWV-S0,6358,0x10000,A226G-cfe)
+ $(call Image/Build/CFEAGPF,$(1),DWV-S0,6358,0x10000,A226G)
+
+ # Pirelli A226M
+ $(call Image/Build/CFEAGPF,$(1),DWV-S0,6358,0x20000,A226M-cfe)
+ $(call Image/Build/CFEAGPF,$(1),DWV-S0,6358,0x20000,A226M)
+
+ # RG100A,DB120 etc.
+ $(call Image/Build/RG100A,$(1),96358VW2,6358,0x20000,RG100A_DB120)
+
+ # Telsey CPVA642-type (e.g. CPA-ZNTE60T)
+ $(call Image/Build/CFE,$(1),CPVA642,6358,CPA-ZNTE60T,,--signature "Telsey Tlc",--signature2 "99.99.999",--second-image-flag "0")
+
+ # T-Com Speedport W 500V
+ $(call Image/Build/CFEFIXUP,$(1),96348GW,SPW500V,6348,SPW500V)
+
+ #HW553
+ $(call Image/Build/CFEHW553,$(1),HW553,6358,0x20000,HW553)
+
+ # T-Com Speedport W 303V Typ B
+ $(call Image/Build/SPW303V,$(1),96358-502V,6358,SPW303V)
endef
$(eval $(call BuildImage))
projects / openwrt.git / blobdiff