/*
- * ADM5120 built in ethernet switch driver
+ * ADM5120 built-in ethernet switch driver
*
- * Copyright Jeroen Vreeken (pe1rxq@amsat.org), 2005
+ * Copyright (C) 2007,2008 Gabor Juhos <juhosg at openwrt.org>
*
- * Inspiration for this driver came from the original ADMtek 2.4
- * driver, Copyright ADMtek Inc.
+ * This code was based on a driver for Linux 2.6.xx by Jeroen Vreeken.
+ * Copyright Jeroen Vreeken (pe1rxq@amsat.org), 2005
+ * NAPI extension for the Jeroen's driver
+ * Copyright Thomas Langer (Thomas.Langer@infineon.com), 2007
+ * Copyright Friedrich Beckmann (Friedrich.Beckmann@infineon.com), 2007
+ * Inspiration for the Jeroen's driver came from the ADMtek 2.4 driver.
+ * Copyright ADMtek Inc.
*
- * NAPI extensions by Thomas Langer (Thomas.Langer@infineon.com)
- * and Friedrich Beckmann (Friedrich.Beckmann@infineon.com), 2007
- *
- * TODO: Add support of high prio queues (currently disabled)
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
*
*/
-#include <linux/autoconf.h>
-#include <linux/module.h>
+
#include <linux/kernel.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
+#include <linux/module.h>
#include <linux/errno.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
+#include <linux/spinlock.h>
+#include <linux/platform_device.h>
+
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+
+#include <linux/io.h>
+#include <linux/irq.h>
+
#include <asm/mipsregs.h>
-#include <asm/irq.h>
-#include <asm/io.h>
+
+#include <adm5120_info.h>
+#include <adm5120_defs.h>
+#include <adm5120_irq.h>
+#include <adm5120_switch.h>
+
#include "adm5120sw.h"
-#include <asm/mach-adm5120/adm5120_info.h>
-#include <asm/mach-adm5120/adm5120_irq.h>
+#define DRV_NAME "adm5120-switch"
+#define DRV_DESC "ADM5120 built-in ethernet switch driver"
+#define DRV_VERSION "0.1.1"
+
+#define CONFIG_ADM5120_SWITCH_NAPI 1
+#undef CONFIG_ADM5120_SWITCH_DEBUG
+
+/* ------------------------------------------------------------------------ */
+
+#ifdef CONFIG_ADM5120_SWITCH_DEBUG
+#define SW_DBG(f, a...) printk(KERN_DBG "%s: " f, DRV_NAME , ## a)
+#else
+#define SW_DBG(f, a...) do {} while (0)
+#endif
+#define SW_ERR(f, a...) printk(KERN_ERR "%s: " f, DRV_NAME , ## a)
+#define SW_INFO(f, a...) printk(KERN_INFO "%s: " f, DRV_NAME , ## a)
+
+#define SWITCH_NUM_PORTS 6
+#define ETH_CSUM_LEN 4
+
+#define RX_MAX_PKTLEN 1550
+#define RX_RING_SIZE 64
+
+#define TX_RING_SIZE 32
+#define TX_QUEUE_LEN 28 /* Limit ring entries actually used. */
+#define TX_TIMEOUT HZ*400
-MODULE_AUTHOR("Jeroen Vreeken (pe1rxq@amsat.org)");
-MODULE_DESCRIPTION("ADM5120 ethernet switch driver");
-MODULE_LICENSE("GPL");
+#define RX_DESCS_SIZE (RX_RING_SIZE * sizeof(struct dma_desc *))
+#define RX_SKBS_SIZE (RX_RING_SIZE * sizeof(struct sk_buff *))
+#define TX_DESCS_SIZE (TX_RING_SIZE * sizeof(struct dma_desc *))
+#define TX_SKBS_SIZE (TX_RING_SIZE * sizeof(struct sk_buff *))
-/* default settings - unlimited TX and RX on all ports, default shaper mode */
-static unsigned char bw_matrix[SW_DEVS] = {
- 0, 0, 0, 0, 0, 0
+#define SKB_ALLOC_LEN (RX_MAX_PKTLEN + 32)
+#define SKB_RESERVE_LEN (NET_IP_ALIGN + NET_SKB_PAD)
+
+#define SWITCH_INTS_HIGH (SWITCH_INT_SHD | SWITCH_INT_RHD | SWITCH_INT_HDF)
+#define SWITCH_INTS_LOW (SWITCH_INT_SLD | SWITCH_INT_RLD | SWITCH_INT_LDF)
+#define SWITCH_INTS_ERR (SWITCH_INT_RDE | SWITCH_INT_SDE | SWITCH_INT_CPUH)
+#define SWITCH_INTS_Q (SWITCH_INT_P0QF | SWITCH_INT_P1QF | SWITCH_INT_P2QF | \
+ SWITCH_INT_P3QF | SWITCH_INT_P4QF | SWITCH_INT_P5QF | \
+ SWITCH_INT_CPQF | SWITCH_INT_GQF)
+
+#define SWITCH_INTS_ALL (SWITCH_INTS_HIGH | SWITCH_INTS_LOW | \
+ SWITCH_INTS_ERR | SWITCH_INTS_Q | \
+ SWITCH_INT_MD | SWITCH_INT_PSC)
+
+#define SWITCH_INTS_USED (SWITCH_INTS_LOW | SWITCH_INT_PSC)
+#define SWITCH_INTS_POLL (SWITCH_INT_RLD | SWITCH_INT_LDF | SWITCH_INT_SLD)
+
+/* ------------------------------------------------------------------------ */
+
+struct adm5120_if_priv {
+ struct net_device *dev;
+
+ unsigned int vlan_no;
+ unsigned int port_mask;
+
+#ifdef CONFIG_ADM5120_SWITCH_NAPI
+ struct napi_struct napi;
+#endif
};
+struct dma_desc {
+ __u32 buf1;
+#define DESC_OWN (1UL << 31) /* Owned by the switch */
+#define DESC_EOR (1UL << 28) /* End of Ring */
+#define DESC_ADDR_MASK 0x1FFFFFF
+#define DESC_ADDR(x) ((__u32)(x) & DESC_ADDR_MASK)
+ __u32 buf2;
+#define DESC_BUF2_EN (1UL << 31) /* Buffer 2 enable */
+ __u32 buflen;
+ __u32 misc;
+/* definitions for tx/rx descriptors */
+#define DESC_PKTLEN_SHIFT 16
+#define DESC_PKTLEN_MASK 0x7FF
+/* tx descriptor specific part */
+#define DESC_CSUM (1UL << 31) /* Append checksum */
+#define DESC_DSTPORT_SHIFT 8
+#define DESC_DSTPORT_MASK 0x3F
+#define DESC_VLAN_MASK 0x3F
+/* rx descriptor specific part */
+#define DESC_SRCPORT_SHIFT 12
+#define DESC_SRCPORT_MASK 0x7
+#define DESC_DA_MASK 0x3
+#define DESC_DA_SHIFT 4
+#define DESC_IPCSUM_FAIL (1UL << 3) /* IP checksum fail */
+#define DESC_VLAN_TAG (1UL << 2) /* VLAN tag present */
+#define DESC_TYPE_MASK 0x3 /* mask for Packet type */
+#define DESC_TYPE_IP 0x0 /* IP packet */
+#define DESC_TYPE_PPPoE 0x1 /* PPPoE packet */
+} __attribute__ ((aligned(16)));
+
+/* ------------------------------------------------------------------------ */
+
static int adm5120_nrdevs;
-static struct net_device *adm5120_devs[SW_DEVS];
+static struct net_device *adm5120_devs[SWITCH_NUM_PORTS];
/* Lookup table port -> device */
-static struct net_device *adm5120_port[SW_DEVS];
+static struct net_device *adm5120_port[SWITCH_NUM_PORTS];
+
+static struct dma_desc *txl_descs;
+static struct dma_desc *rxl_descs;
+
+static dma_addr_t txl_descs_dma;
+static dma_addr_t rxl_descs_dma;
+
+static struct sk_buff **txl_skbuff;
+static struct sk_buff **rxl_skbuff;
+
+static unsigned int cur_rxl, dirty_rxl; /* producer/consumer ring indices */
+static unsigned int cur_txl, dirty_txl;
+
+static unsigned int sw_used;
+
+static spinlock_t tx_lock = SPIN_LOCK_UNLOCKED;
+
+/* ------------------------------------------------------------------------ */
+
+static inline u32 sw_read_reg(u32 reg)
+{
+ return __raw_readl((void __iomem *)KSEG1ADDR(ADM5120_SWITCH_BASE)+reg);
+}
+
+static inline void sw_write_reg(u32 reg, u32 val)
+{
+ __raw_writel(val, (void __iomem *)KSEG1ADDR(ADM5120_SWITCH_BASE)+reg);
+}
+
+static inline void sw_int_mask(u32 mask)
+{
+ u32 t;
+
+ t = sw_read_reg(SWITCH_REG_INT_MASK);
+ t |= mask;
+ sw_write_reg(SWITCH_REG_INT_MASK, t);
+}
+
+static inline void sw_int_unmask(u32 mask)
+{
+ u32 t;
+
+ t = sw_read_reg(SWITCH_REG_INT_MASK);
+ t &= ~mask;
+ sw_write_reg(SWITCH_REG_INT_MASK, t);
+}
+
+static inline void sw_int_ack(u32 mask)
+{
+ sw_write_reg(SWITCH_REG_INT_STATUS, mask);
+}
+
+static inline u32 sw_int_status(void)
+{
+ u32 t;
-static struct adm5120_dma
- adm5120_dma_txh_v[ADM5120_DMA_TXH] __attribute__((aligned(16))),
- adm5120_dma_txl_v[ADM5120_DMA_TXL] __attribute__((aligned(16))),
- adm5120_dma_rxh_v[ADM5120_DMA_RXH] __attribute__((aligned(16))),
- adm5120_dma_rxl_v[ADM5120_DMA_RXL] __attribute__((aligned(16))),
- *adm5120_dma_txh,
- *adm5120_dma_txl,
- *adm5120_dma_rxh,
- *adm5120_dma_rxl;
-static struct sk_buff
- *adm5120_skb_rxh[ADM5120_DMA_RXH],
- *adm5120_skb_rxl[ADM5120_DMA_RXL],
- *adm5120_skb_txh[ADM5120_DMA_TXH],
- *adm5120_skb_txl[ADM5120_DMA_TXL];
-static int adm5120_rxli = 0;
-static int adm5120_txli = 0;
-/*static int adm5120_txhi = 0;*/
-static int adm5120_if_open = 0;
+ t = sw_read_reg(SWITCH_REG_INT_STATUS);
+ t &= ~sw_read_reg(SWITCH_REG_INT_MASK);
+ return t;
+}
-static inline void adm5120_set_reg(unsigned int reg, unsigned long val)
+static inline u32 desc_get_srcport(struct dma_desc *desc)
{
- *(volatile unsigned long*)(SW_BASE+reg) = val;
+ return (desc->misc >> DESC_SRCPORT_SHIFT) & DESC_SRCPORT_MASK;
}
-static inline unsigned long adm5120_get_reg(unsigned int reg)
+static inline u32 desc_get_pktlen(struct dma_desc *desc)
{
- return *(volatile unsigned long*)(SW_BASE+reg);
+ return (desc->misc >> DESC_PKTLEN_SHIFT) & DESC_PKTLEN_MASK;
}
-static inline void adm5120_rx_dma_update(struct adm5120_dma *dma,
+static inline int desc_ipcsum_fail(struct dma_desc *desc)
+{
+ return ((desc->misc & DESC_IPCSUM_FAIL) != 0);
+}
+
+/* ------------------------------------------------------------------------ */
+
+static void sw_dump_desc(char *label, struct dma_desc *desc, int tx)
+{
+ u32 t;
+
+ SW_DBG("%s %s desc/%p\n", label, tx ? "tx" : "rx", desc);
+
+ t = desc->buf1;
+ SW_DBG(" buf1 %08X addr=%08X; len=%08X %s%s\n", t,
+ t & DESC_ADDR_MASK,
+ desc->buflen,
+ (t & DESC_OWN) ? "SWITCH" : "CPU",
+ (t & DESC_EOR) ? " RE" : "");
+
+ t = desc->buf2;
+ SW_DBG(" buf2 %08X addr=%08X%s\n", desc->buf2,
+ t & DESC_ADDR_MASK,
+ (t & DESC_BUF2_EN) ? " EN" : "" );
+
+ t = desc->misc;
+ if (tx)
+ SW_DBG(" misc %08X%s pktlen=%04X ports=%02X vlan=%02X\n", t,
+ (t & DESC_CSUM) ? " CSUM" : "",
+ (t >> DESC_PKTLEN_SHIFT) & DESC_PKTLEN_MASK,
+ (t >> DESC_DSTPORT_SHIFT) & DESC_DSTPORT_MASK,
+ t & DESC_VLAN_MASK);
+ else
+ SW_DBG(" misc %08X pktlen=%04X port=%d DA=%d%s%s type=%d\n",
+ t,
+ (t >> DESC_PKTLEN_SHIFT) & DESC_PKTLEN_MASK,
+ (t >> DESC_SRCPORT_SHIFT) & DESC_SRCPORT_MASK,
+ (t >> DESC_DA_SHIFT) & DESC_DA_MASK,
+ (t & DESC_IPCSUM_FAIL) ? " IPCF" : "",
+ (t & DESC_VLAN_TAG) ? " VLAN" : "",
+ (t & DESC_TYPE_MASK));
+}
+
+static void sw_dump_intr_mask(char *label, u32 mask)
+{
+ SW_DBG("%s %08X%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s\n",
+ label, mask,
+ (mask & SWITCH_INT_SHD) ? " SHD" : "",
+ (mask & SWITCH_INT_SLD) ? " SLD" : "",
+ (mask & SWITCH_INT_RHD) ? " RHD" : "",
+ (mask & SWITCH_INT_RLD) ? " RLD" : "",
+ (mask & SWITCH_INT_HDF) ? " HDF" : "",
+ (mask & SWITCH_INT_LDF) ? " LDF" : "",
+ (mask & SWITCH_INT_P0QF) ? " P0QF" : "",
+ (mask & SWITCH_INT_P1QF) ? " P1QF" : "",
+ (mask & SWITCH_INT_P2QF) ? " P2QF" : "",
+ (mask & SWITCH_INT_P3QF) ? " P3QF" : "",
+ (mask & SWITCH_INT_P4QF) ? " P4QF" : "",
+ (mask & SWITCH_INT_CPQF) ? " CPQF" : "",
+ (mask & SWITCH_INT_GQF) ? " GQF" : "",
+ (mask & SWITCH_INT_MD) ? " MD" : "",
+ (mask & SWITCH_INT_BCS) ? " BCS" : "",
+ (mask & SWITCH_INT_PSC) ? " PSC" : "",
+ (mask & SWITCH_INT_ID) ? " ID" : "",
+ (mask & SWITCH_INT_W0TE) ? " W0TE" : "",
+ (mask & SWITCH_INT_W1TE) ? " W1TE" : "",
+ (mask & SWITCH_INT_RDE) ? " RDE" : "",
+ (mask & SWITCH_INT_SDE) ? " SDE" : "",
+ (mask & SWITCH_INT_CPUH) ? " CPUH" : "");
+}
+
+static void sw_dump_regs(void)
+{
+ u32 t;
+
+ t = sw_read_reg(SWITCH_REG_PHY_STATUS);
+ SW_DBG("phy_status: %08X\n", t);
+
+ t = sw_read_reg(SWITCH_REG_CPUP_CONF);
+ SW_DBG("cpup_conf: %08X%s%s%s\n", t,
+ (t & CPUP_CONF_DCPUP) ? " DCPUP" : "",
+ (t & CPUP_CONF_CRCP) ? " CRCP" : "",
+ (t & CPUP_CONF_BTM) ? " BTM" : "");
+
+ t = sw_read_reg(SWITCH_REG_PORT_CONF0);
+ SW_DBG("port_conf0: %08X\n", t);
+ t = sw_read_reg(SWITCH_REG_PORT_CONF1);
+ SW_DBG("port_conf1: %08X\n", t);
+ t = sw_read_reg(SWITCH_REG_PORT_CONF2);
+ SW_DBG("port_conf2: %08X\n", t);
+
+ t = sw_read_reg(SWITCH_REG_VLAN_G1);
+ SW_DBG("vlan g1: %08X\n", t);
+ t = sw_read_reg(SWITCH_REG_VLAN_G2);
+ SW_DBG("vlan g2: %08X\n", t);
+
+ t = sw_read_reg(SWITCH_REG_BW_CNTL0);
+ SW_DBG("bw_cntl0: %08X\n", t);
+ t = sw_read_reg(SWITCH_REG_BW_CNTL1);
+ SW_DBG("bw_cntl1: %08X\n", t);
+
+ t = sw_read_reg(SWITCH_REG_PHY_CNTL0);
+ SW_DBG("phy_cntl0: %08X\n", t);
+ t = sw_read_reg(SWITCH_REG_PHY_CNTL1);
+ SW_DBG("phy_cntl1: %08X\n", t);
+ t = sw_read_reg(SWITCH_REG_PHY_CNTL2);
+ SW_DBG("phy_cntl2: %08X\n", t);
+ t = sw_read_reg(SWITCH_REG_PHY_CNTL3);
+ SW_DBG("phy_cntl3: %08X\n", t);
+ t = sw_read_reg(SWITCH_REG_PHY_CNTL4);
+ SW_DBG("phy_cntl4: %08X\n", t);
+
+ t = sw_read_reg(SWITCH_REG_INT_STATUS);
+ sw_dump_intr_mask("int_status: ", t);
+
+ t = sw_read_reg(SWITCH_REG_INT_MASK);
+ sw_dump_intr_mask("int_mask: ", t);
+
+ t = sw_read_reg(SWITCH_REG_SHDA);
+ SW_DBG("shda: %08X\n", t);
+ t = sw_read_reg(SWITCH_REG_SLDA);
+ SW_DBG("slda: %08X\n", t);
+ t = sw_read_reg(SWITCH_REG_RHDA);
+ SW_DBG("rhda: %08X\n", t);
+ t = sw_read_reg(SWITCH_REG_RLDA);
+ SW_DBG("rlda: %08X\n", t);
+}
+
+/* ------------------------------------------------------------------------ */
+
+static inline void adm5120_rx_dma_update(struct dma_desc *desc,
struct sk_buff *skb, int end)
{
- dma->status = 0;
- dma->cntl = 0;
- dma->len = ADM5120_DMA_RXSIZE;
- dma->data = ADM5120_DMA_ADDR(skb->data) |
- ADM5120_DMA_OWN | (end ? ADM5120_DMA_RINGEND : 0);
-}
-
-static int adm5120_rx(struct net_device *dev,int *budget)
-{
- struct sk_buff *skb, *skbn;
- struct adm5120_sw *priv;
- struct net_device *cdev;
- struct adm5120_dma *dma;
- int port, len, quota;
-
- quota = min(dev->quota, *budget);
- dma = &adm5120_dma_rxl[adm5120_rxli];
- while (!(dma->data & ADM5120_DMA_OWN) && quota) {
- port = (dma->status & ADM5120_DMA_PORTID);
- port >>= ADM5120_DMA_PORTSHIFT;
- cdev = adm5120_port[port];
- if (cdev != dev) { /* The current packet belongs to a different device */
- if ((cdev==NULL) || !netif_running(cdev)) {
- /* discard (update with old skb) */
- skb = skbn = NULL;
- goto rx_skip;
- }
- else {
- netif_rx_schedule(cdev);/* Start polling next device */
- return 1; /* return 1 -> More packets to process */
- }
+ desc->misc = 0;
+ desc->buf2 = 0;
+ desc->buflen = RX_MAX_PKTLEN;
+ desc->buf1 = DESC_ADDR(skb->data) |
+ DESC_OWN | (end ? DESC_EOR : 0);
+}
+
+static void adm5120_switch_rx_refill(void)
+{
+ unsigned int entry;
+
+ for (; cur_rxl - dirty_rxl > 0; dirty_rxl++) {
+ struct dma_desc *desc;
+ struct sk_buff *skb;
+
+ entry = dirty_rxl % RX_RING_SIZE;
+ desc = &rxl_descs[entry];
+ skb = rxl_skbuff[entry];
+ if (skb == NULL) {
+ skb = alloc_skb(SKB_ALLOC_LEN, GFP_ATOMIC);
+ if (skb) {
+ skb_reserve(skb, SKB_RESERVE_LEN);
+ rxl_skbuff[entry] = skb;
+ } else {
+ SW_ERR("no memory for skb\n");
+ desc->buflen = 0;
+ desc->buf2 = 0;
+ desc->misc = 0;
+ desc->buf1 = (desc->buf1 & DESC_EOR) | DESC_OWN;
+ break;
+ }
}
- skb = adm5120_skb_rxl[adm5120_rxli];
- len = (dma->status & ADM5120_DMA_LEN);
- len >>= ADM5120_DMA_LENSHIFT;
- len -= ETH_FCS;
- priv = netdev_priv(dev);
- if (len <= 0 || len > ADM5120_DMA_RXSIZE ||
- dma->status & ADM5120_DMA_FCSERR) {
- priv->stats.rx_errors++;
- skbn = NULL;
- } else {
- skbn = dev_alloc_skb(ADM5120_DMA_RXSIZE+16);
- if (skbn) {
- skb_put(skb, len);
- skb->dev = dev;
- skb->protocol = eth_type_trans(skb, dev);
- skb->ip_summed = CHECKSUM_UNNECESSARY;
- dev->last_rx = jiffies;
- priv->stats.rx_packets++;
- priv->stats.rx_bytes += len;
- skb_reserve(skbn, NET_IP_ALIGN);
- adm5120_skb_rxl[adm5120_rxli] = skbn;
+ desc->buf2 = 0;
+ desc->buflen = RX_MAX_PKTLEN;
+ desc->misc = 0;
+ desc->buf1 = (desc->buf1 & DESC_EOR) | DESC_OWN |
+ DESC_ADDR(skb->data);
+ }
+}
+
+static int adm5120_switch_rx(int limit)
+{
+ unsigned int done = 0;
+
+ SW_DBG("rx start, limit=%d, cur_rxl=%u, dirty_rxl=%u\n",
+ limit, cur_rxl, dirty_rxl);
+
+ while (done < limit) {
+ int entry = cur_rxl % RX_RING_SIZE;
+ struct dma_desc *desc = &rxl_descs[entry];
+ struct net_device *rdev;
+ unsigned int port;
+
+ if (desc->buf1 & DESC_OWN)
+ break;
+
+ if (dirty_rxl + RX_RING_SIZE == cur_rxl)
+ break;
+
+ port = desc_get_srcport(desc);
+ rdev = adm5120_port[port];
+
+ SW_DBG("rx descriptor %u, desc=%p, skb=%p\n", entry, desc,
+ rxl_skbuff[entry]);
+
+ if ((rdev) && netif_running(rdev)) {
+ struct sk_buff *skb = rxl_skbuff[entry];
+ int pktlen;
+
+ pktlen = desc_get_pktlen(desc);
+ pktlen -= ETH_CSUM_LEN;
+
+ if ((pktlen == 0) || desc_ipcsum_fail(desc)) {
+ rdev->stats.rx_errors++;
+ if (pktlen == 0)
+ rdev->stats.rx_length_errors++;
+ if (desc_ipcsum_fail(desc))
+ rdev->stats.rx_crc_errors++;
+ SW_DBG("rx error, recycling skb %u\n", entry);
} else {
- printk(KERN_INFO "%s recycling!\n", dev->name);
+ skb_put(skb, pktlen);
+
+ skb->dev = rdev;
+ skb->protocol = eth_type_trans(skb, rdev);
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+
+ dma_cache_wback_inv((unsigned long)skb->data,
+ skb->len);
+
+#ifdef CONFIG_ADM5120_SWITCH_NAPI
+ netif_receive_skb(skb);
+#else
+ netif_rx(skb);
+#endif
+
+ rdev->last_rx = jiffies;
+ rdev->stats.rx_packets++;
+ rdev->stats.rx_bytes += pktlen;
+
+ rxl_skbuff[entry] = NULL;
+ done++;
}
+ } else {
+ SW_DBG("no rx device, recycling skb %u\n", entry);
}
-rx_skip:
- adm5120_rx_dma_update(&adm5120_dma_rxl[adm5120_rxli],
- adm5120_skb_rxl[adm5120_rxli],
- (ADM5120_DMA_RXL-1==adm5120_rxli));
- if (ADM5120_DMA_RXL == ++adm5120_rxli)
- adm5120_rxli = 0;
- dma = &adm5120_dma_rxl[adm5120_rxli];
- if (skbn){
- netif_receive_skb(skb);
- dev->quota--;
- (*budget)--;
- quota--;
+
+ cur_rxl++;
+ if (cur_rxl - dirty_rxl > RX_RING_SIZE / 4)
+ adm5120_switch_rx_refill();
+ }
+
+ adm5120_switch_rx_refill();
+
+ SW_DBG("rx finished, cur_rxl=%u, dirty_rxl=%u, processed %d\n",
+ cur_rxl, dirty_rxl, done);
+
+ return done;
+}
+
+static void adm5120_switch_tx(void)
+{
+ unsigned int entry;
+
+ spin_lock(&tx_lock);
+ entry = dirty_txl % TX_RING_SIZE;
+ while (dirty_txl != cur_txl) {
+ struct dma_desc *desc = &txl_descs[entry];
+ struct sk_buff *skb = txl_skbuff[entry];
+
+ if (desc->buf1 & DESC_OWN)
+ break;
+
+ if (netif_running(skb->dev)) {
+ skb->dev->stats.tx_bytes += skb->len;
+ skb->dev->stats.tx_packets++;
}
- } /* while */
- /* If there are still packets to process, return 1 */
- if (quota){
- /* No more packets to process, so disable the polling and reenable the interrupts */
- netif_rx_complete(dev);
- adm5120_set_reg(ADM5120_INT_MASK,
- adm5120_get_reg(ADM5120_INT_MASK) &
- ~(ADM5120_INT_RXL|ADM5120_INT_LFULL));
- return 0;
+ dev_kfree_skb_irq(skb);
+ txl_skbuff[entry] = NULL;
+ entry = (++dirty_txl) % TX_RING_SIZE;
+ }
+
+ if ((cur_txl - dirty_txl) < TX_QUEUE_LEN - 4) {
+ int i;
+ for (i = 0; i < SWITCH_NUM_PORTS; i++) {
+ if (!adm5120_devs[i])
+ continue;
+ netif_wake_queue(adm5120_devs[i]);
+ }
+ }
+ spin_unlock(&tx_lock);
+}
+
+#ifdef CONFIG_ADM5120_SWITCH_NAPI
+static int adm5120_if_poll(struct napi_struct *napi, int limit)
+{
+ struct adm5120_if_priv *priv = container_of(napi,
+ struct adm5120_if_priv, napi);
+ struct net_device *dev = priv->dev;
+ int done;
+ u32 status;
+
+ sw_int_ack(SWITCH_INTS_POLL);
+
+ SW_DBG("%s: processing TX ring\n", dev->name);
+ adm5120_switch_tx();
+
+ SW_DBG("%s: processing RX ring\n", dev->name);
+ done = adm5120_switch_rx(limit);
+ status = sw_int_status() & SWITCH_INTS_POLL;
+ if ((done < limit) && (!status)) {
+ SW_DBG("disable polling mode for %s\n", dev->name);
+ netif_rx_complete(dev, napi);
+ sw_int_unmask(SWITCH_INTS_POLL);
+ return 0;
}
+
+ SW_DBG("%s still in polling mode, done=%d, status=%x\n",
+ dev->name, done, status);
return 1;
}
+#endif /* CONFIG_ADM5120_SWITCH_NAPI */
+
-static irqreturn_t adm5120_sw_irq(int irq, void *dev_id)
+static irqreturn_t adm5120_switch_irq(int irq, void *dev_id)
{
- unsigned long intreg, intmask;
- int port;
- struct net_device *dev;
+ u32 status;
+
+ status = sw_int_status();
+ status &= SWITCH_INTS_ALL;
+ if (!status)
+ return IRQ_NONE;
+
+#ifdef CONFIG_ADM5120_SWITCH_NAPI
+ sw_int_ack(status & ~SWITCH_INTS_POLL);
+
+ if (status & SWITCH_INTS_POLL) {
+ struct net_device *dev = dev_id;
+ struct adm5120_if_priv *priv = netdev_priv(dev);
+
+ sw_dump_intr_mask("poll ints", status);
+ SW_DBG("enable polling mode for %s\n", dev->name);
+ sw_int_mask(SWITCH_INTS_POLL);
+ netif_rx_schedule(dev, &priv->napi);
+ }
+#else
+ sw_int_ack(status);
+
+ if (status & (SWITCH_INT_RLD | SWITCH_INT_LDF)) {
+ adm5120_switch_rx(RX_RING_SIZE);
+ }
+
+ if (status & SWITCH_INT_SLD) {
+ adm5120_switch_tx();
+ }
+#endif
- intmask = adm5120_get_reg(ADM5120_INT_MASK); /* Remember interrupt mask */
- adm5120_set_reg(ADM5120_INT_MASK, ADM5120_INTMASKALL); /* Disable interrupts */
-
- intreg = adm5120_get_reg(ADM5120_INT_ST); /* Read interrupt status */
- adm5120_set_reg(ADM5120_INT_ST, intreg); /* Clear interrupt status */
-
- /* In NAPI operation the interrupts are disabled and the polling mechanism
- * is activated. The interrupts are finally enabled again in the polling routine.
- */
- if (intreg & (ADM5120_INT_RXL|ADM5120_INT_LFULL)) {
- /* check rx buffer for port number */
- port = adm5120_dma_rxl[adm5120_rxli].status & ADM5120_DMA_PORTID;
- port >>= ADM5120_DMA_PORTSHIFT;
- dev = adm5120_port[port];
- if ((dev==NULL) || !netif_running(dev)) {
- /* discard (update with old skb) */
- adm5120_rx_dma_update(&adm5120_dma_rxl[adm5120_rxli],
- adm5120_skb_rxl[adm5120_rxli],
- (ADM5120_DMA_RXL-1==adm5120_rxli));
- if (ADM5120_DMA_RXL == ++adm5120_rxli)
- adm5120_rxli = 0;
+ return IRQ_HANDLED;
+}
+
+static void adm5120_set_bw(char *matrix)
+{
+ unsigned long val;
+
+ /* Port 0 to 3 are set using the bandwidth control 0 register */
+ val = matrix[0] + (matrix[1]<<8) + (matrix[2]<<16) + (matrix[3]<<24);
+ sw_write_reg(SWITCH_REG_BW_CNTL0, val);
+
+ /* Port 4 and 5 are set using the bandwidth control 1 register */
+ val = matrix[4];
+ if (matrix[5] == 1)
+ sw_write_reg(SWITCH_REG_BW_CNTL1, val | 0x80000000);
+ else
+ sw_write_reg(SWITCH_REG_BW_CNTL1, val & ~0x8000000);
+
+ SW_DBG("D: ctl0 0x%ux, ctl1 0x%ux\n", sw_read_reg(SWITCH_REG_BW_CNTL0),
+ sw_read_reg(SWITCH_REG_BW_CNTL1));
+}
+
+static void adm5120_switch_tx_ring_reset(struct dma_desc *desc,
+ struct sk_buff **skbl, int num)
+{
+ memset(desc, 0, num * sizeof(*desc));
+ desc[num-1].buf1 |= DESC_EOR;
+ memset(skbl, 0, sizeof(struct skb*)*num);
+
+ cur_txl = 0;
+ dirty_txl = 0;
+}
+
+static void adm5120_switch_rx_ring_reset(struct dma_desc *desc,
+ struct sk_buff **skbl, int num)
+{
+ int i;
+
+ memset(desc, 0, num * sizeof(*desc));
+ for (i = 0; i < num; i++) {
+ skbl[i] = dev_alloc_skb(SKB_ALLOC_LEN);
+ if (!skbl[i]) {
+ i = num;
+ break;
}
- else {
- netif_rx_schedule(dev);
- intmask |= (ADM5120_INT_RXL|ADM5120_INT_LFULL); /* Disable RX interrupts */
+ skb_reserve(skbl[i], SKB_RESERVE_LEN);
+ adm5120_rx_dma_update(&desc[i], skbl[i], (num-1==i));
+ }
+
+ cur_rxl = 0;
+ dirty_rxl = 0;
+}
+
+static int adm5120_switch_tx_ring_alloc(void)
+{
+ int err;
+
+ txl_descs = dma_alloc_coherent(NULL, TX_DESCS_SIZE, &txl_descs_dma,
+ GFP_ATOMIC);
+ if (!txl_descs) {
+ err = -ENOMEM;
+ goto err;
+ }
+
+ txl_skbuff = kzalloc(TX_SKBS_SIZE, GFP_KERNEL);
+ if (!txl_skbuff) {
+ err = -ENOMEM;
+ goto err;
+ }
+
+ return 0;
+
+err:
+ return err;
+}
+
+static void adm5120_switch_tx_ring_free(void)
+{
+ int i;
+
+ if (txl_skbuff) {
+ for (i = 0; i < TX_RING_SIZE; i++)
+ if (txl_skbuff[i])
+ kfree_skb(txl_skbuff[i]);
+ kfree(txl_skbuff);
+ }
+
+ if (txl_descs)
+ dma_free_coherent(NULL, TX_DESCS_SIZE, txl_descs,
+ txl_descs_dma);
+}
+
+static int adm5120_switch_rx_ring_alloc(void)
+{
+ int err;
+ int i;
+
+ /* init RX ring */
+ rxl_descs = dma_alloc_coherent(NULL, RX_DESCS_SIZE, &rxl_descs_dma,
+ GFP_ATOMIC);
+ if (!rxl_descs) {
+ err = -ENOMEM;
+ goto err;
+ }
+
+ rxl_skbuff = kzalloc(RX_SKBS_SIZE, GFP_KERNEL);
+ if (!rxl_skbuff) {
+ err = -ENOMEM;
+ goto err;
+ }
+
+ for (i = 0; i < RX_RING_SIZE; i++) {
+ struct sk_buff *skb;
+ skb = alloc_skb(SKB_ALLOC_LEN, GFP_ATOMIC);
+ if (!skb) {
+ err = -ENOMEM;
+ goto err;
}
+ rxl_skbuff[i] = skb;
+ skb_reserve(skb, SKB_RESERVE_LEN);
}
-#ifdef CONFIG_DEBUG
- if (intreg & ~(intmask))
- printk(KERN_INFO "adm5120sw: IRQ 0x%08X unexpected!\n", (unsigned int)(intreg & ~(intmask)));
-#endif
- adm5120_set_reg(ADM5120_INT_MASK, intmask);
+ return 0;
- return IRQ_HANDLED;
+err:
+ return err;
+}
+
+static void adm5120_switch_rx_ring_free(void)
+{
+ int i;
+
+ if (rxl_skbuff) {
+ for (i = 0; i < RX_RING_SIZE; i++)
+ if (rxl_skbuff[i])
+ kfree_skb(rxl_skbuff[i]);
+ kfree(rxl_skbuff);
+ }
+
+ if (rxl_descs)
+ dma_free_coherent(NULL, RX_DESCS_SIZE, rxl_descs,
+ rxl_descs_dma);
+}
+
+static void adm5120_write_mac(struct net_device *dev)
+{
+ struct adm5120_if_priv *priv = netdev_priv(dev);
+ unsigned char *mac = dev->dev_addr;
+ u32 t;
+
+ t = mac[2] | (mac[3] << MAC_WT1_MAC3_SHIFT) |
+ (mac[4] << MAC_WT1_MAC4_SHIFT) | (mac[5] << MAC_WT1_MAC5_SHIFT);
+ sw_write_reg(SWITCH_REG_MAC_WT1, t);
+
+ t = (mac[0] << MAC_WT0_MAC0_SHIFT) | (mac[1] << MAC_WT0_MAC1_SHIFT) |
+ MAC_WT0_MAWC | MAC_WT0_WVE | (priv->vlan_no<<3);
+
+ sw_write_reg(SWITCH_REG_MAC_WT0, t);
+
+ while (!(sw_read_reg(SWITCH_REG_MAC_WT0) & MAC_WT0_MWD));
}
static void adm5120_set_vlan(char *matrix)
int vlan_port, port;
val = matrix[0] + (matrix[1]<<8) + (matrix[2]<<16) + (matrix[3]<<24);
- adm5120_set_reg(ADM5120_VLAN_GI, val);
+ sw_write_reg(SWITCH_REG_VLAN_G1, val);
val = matrix[4] + (matrix[5]<<8);
- adm5120_set_reg(ADM5120_VLAN_GII, val);
+ sw_write_reg(SWITCH_REG_VLAN_G2, val);
+
/* Now set/update the port vs. device lookup table */
- for (port=0; port<SW_DEVS; port++) {
- for (vlan_port=0; vlan_port<SW_DEVS && !(matrix[vlan_port] & (0x00000001 << port)); vlan_port++);
- if (vlan_port <SW_DEVS)
+ for (port=0; port<SWITCH_NUM_PORTS; port++) {
+ for (vlan_port=0; vlan_port<SWITCH_NUM_PORTS && !(matrix[vlan_port] & (0x00000001 << port)); vlan_port++);
+ if (vlan_port <SWITCH_NUM_PORTS)
adm5120_port[port] = adm5120_devs[vlan_port];
else
adm5120_port[port] = NULL;
}
}
-static void adm5120_set_bw(char *matrix)
+static void adm5120_switch_set_vlan_mac(unsigned int vlan, unsigned char *mac)
{
- unsigned long val;
+ u32 t;
- /* Port 0 to 3 are set using the bandwidth control 0 register */
- val = matrix[0] + (matrix[1]<<8) + (matrix[2]<<16) + (matrix[3]<<24);
- adm5120_set_reg(ADM5120_BW_CTL0, val);
+ t = mac[2] | (mac[3] << MAC_WT1_MAC3_SHIFT)
+ | (mac[4] << MAC_WT1_MAC4_SHIFT)
+ | (mac[5] << MAC_WT1_MAC5_SHIFT);
+ sw_write_reg(SWITCH_REG_MAC_WT1, t);
- /* Port 4 and 5 are set using the bandwidth control 1 register */
- val = matrix[4];
- if (matrix[5] == 1)
- adm5120_set_reg(ADM5120_BW_CTL1, val | 0x80000000);
- else
- adm5120_set_reg(ADM5120_BW_CTL1, val & ~0x8000000);
+ t = (mac[0] << MAC_WT0_MAC0_SHIFT) | (mac[1] << MAC_WT0_MAC1_SHIFT) |
+ MAC_WT0_MAWC | MAC_WT0_WVE | (vlan << MAC_WT0_WVN_SHIFT) |
+ (MAC_WT0_WAF_STATIC << MAC_WT0_WAF_SHIFT);
+ sw_write_reg(SWITCH_REG_MAC_WT0, t);
- printk(KERN_DEBUG "D: ctl0 0x%lx, ctl1 0x%lx\n",
- adm5120_get_reg(ADM5120_BW_CTL0),
- adm5120_get_reg(ADM5120_BW_CTL1));
+ do {
+ t = sw_read_reg(SWITCH_REG_MAC_WT0);
+ } while ((t & MAC_WT0_MWD) == 0);
}
-static int adm5120_sw_open(struct net_device *dev)
+static void adm5120_switch_set_vlan_ports(unsigned int vlan, u32 ports)
{
- unsigned long val;
+ unsigned int reg;
+ u32 t;
+
+ if (vlan < 4)
+ reg = SWITCH_REG_VLAN_G1;
+ else {
+ vlan -= 4;
+ reg = SWITCH_REG_VLAN_G2;
+ }
+
+ t = sw_read_reg(reg);
+ t &= ~(0xFF << (vlan*8));
+ t |= (ports << (vlan*8));
+ sw_write_reg(reg, t);
+}
+
+/* ------------------------------------------------------------------------ */
+
+#ifdef CONFIG_ADM5120_SWITCH_NAPI
+static inline void adm5120_if_napi_enable(struct net_device *dev)
+{
+ struct adm5120_if_priv *priv = netdev_priv(dev);
+ napi_enable(&priv->napi);
+}
+
+static inline void adm5120_if_napi_disable(struct net_device *dev)
+{
+ struct adm5120_if_priv *priv = netdev_priv(dev);
+ napi_disable(&priv->napi);
+}
+#else
+static inline void adm5120_if_napi_enable(struct net_device *dev) {}
+static inline void adm5120_if_napi_disable(struct net_device *dev) {}
+#endif /* CONFIG_ADM5120_SWITCH_NAPI */
+
+static int adm5120_if_open(struct net_device *dev)
+{
+ u32 t;
+ int err;
int i;
- netif_start_queue(dev);
- if (!adm5120_if_open++) {
- /* enable interrupts on first open */
- adm5120_set_reg(ADM5120_INT_MASK,
- adm5120_get_reg(ADM5120_INT_MASK) &
- ~(ADM5120_INT_RXL|ADM5120_INT_LFULL));
+ adm5120_if_napi_enable(dev);
+
+ err = request_irq(dev->irq, adm5120_switch_irq,
+ (IRQF_SHARED | IRQF_DISABLED), dev->name, dev);
+ if (err) {
+ SW_ERR("unable to get irq for %s\n", dev->name);
+ goto err;
}
+
+ if (!sw_used++)
+ /* enable interrupts on first open */
+ sw_int_unmask(SWITCH_INTS_USED);
+
/* enable (additional) port */
- val = adm5120_get_reg(ADM5120_PORT_CONF0);
- for (i=0; i<SW_DEVS; i++) {
+ t = sw_read_reg(SWITCH_REG_PORT_CONF0);
+ for (i = 0; i < SWITCH_NUM_PORTS; i++) {
if (dev == adm5120_devs[i])
- val &= ~adm5120_eth_vlans[i];
+ t &= ~adm5120_eth_vlans[i];
}
- adm5120_set_reg(ADM5120_PORT_CONF0, val);
+ sw_write_reg(SWITCH_REG_PORT_CONF0, t);
+
+ netif_start_queue(dev);
+
return 0;
+
+err:
+ adm5120_if_napi_disable(dev);
+ return err;
}
-static int adm5120_sw_stop(struct net_device *dev)
+static int adm5120_if_stop(struct net_device *dev)
{
- unsigned long val;
+ u32 t;
int i;
- if (!--adm5120_if_open) {
- adm5120_set_reg(ADM5120_INT_MASK, ADM5120_INTMASKALL);
- }
+ netif_stop_queue(dev);
+ adm5120_if_napi_disable(dev);
+
/* disable port if not assigned to other devices */
- val = adm5120_get_reg(ADM5120_PORT_CONF0) | ADM5120_PORTDISALL;
- for (i=0; i<SW_DEVS; i++) {
+ t = sw_read_reg(SWITCH_REG_PORT_CONF0);
+ t |= SWITCH_PORTS_NOCPU;
+ for (i = 0; i < SWITCH_NUM_PORTS; i++) {
if ((dev != adm5120_devs[i]) && netif_running(adm5120_devs[i]))
- val &= ~adm5120_eth_vlans[i];
+ t &= ~adm5120_eth_vlans[i];
}
- adm5120_set_reg(ADM5120_PORT_CONF0, val);
- netif_stop_queue(dev);
+ sw_write_reg(SWITCH_REG_PORT_CONF0, t);
+
+ if (!--sw_used)
+ sw_int_mask(SWITCH_INTS_USED);
+
+ free_irq(dev->irq, dev);
+
return 0;
}
-static int adm5120_sw_tx(struct sk_buff *skb, struct net_device *dev)
+static int adm5120_if_hard_start_xmit(struct sk_buff *skb,
+ struct net_device *dev)
{
- struct adm5120_dma *dma;
- struct sk_buff **skbl = adm5120_skb_txl;
- struct adm5120_sw *priv = netdev_priv(dev);
+ struct dma_desc *desc;
+ struct adm5120_if_priv *priv = netdev_priv(dev);
+ unsigned int entry;
unsigned long data;
+ int i;
- dev->trans_start = jiffies;
- dma = &adm5120_dma_txl[adm5120_txli];
- if (dma->data & ADM5120_DMA_OWN) {
+ /* lock switch irq */
+ spin_lock_irq(&tx_lock);
+
+ /* calculate the next TX descriptor entry. */
+ entry = cur_txl % TX_RING_SIZE;
+
+ desc = &txl_descs[entry];
+ if (desc->buf1 & DESC_OWN) {
/* We want to write a packet but the TX queue is still
* occupied by the DMA. We are faster than the DMA... */
+ SW_DBG("%s unable to transmit, packet dopped\n", dev->name);
dev_kfree_skb(skb);
- priv->stats.tx_dropped++;
+ dev->stats.tx_dropped++;
return 0;
}
- data = ADM5120_DMA_ADDR(skb->data) | ADM5120_DMA_OWN;
- if (adm5120_txli == ADM5120_DMA_TXL-1)
- data |= ADM5120_DMA_RINGEND;
- dma->status =
- ((skb->len<ETH_ZLEN?ETH_ZLEN:skb->len) << ADM5120_DMA_LENSHIFT) |
- (0x1 << priv->port);
-
- dma->len = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len;
- priv->stats.tx_packets++;
- priv->stats.tx_bytes += skb->len;
-
- /* free old skbs here instead of tx completion interrupt:
- * will hold some more memory allocated but reduces interrupts */
- if (skbl[adm5120_txli]){
- dev_kfree_skb(skbl[adm5120_txli]);
- }
- skbl[adm5120_txli] = skb;
- dma->data = data; /* Here we enable the buffer for the TX DMA machine */
- adm5120_set_reg(ADM5120_SEND_TRIG, ADM5120_SEND_TRIG_L);
- if (++adm5120_txli == ADM5120_DMA_TXL)
- adm5120_txli = 0;
- return 0;
-}
+ txl_skbuff[entry] = skb;
+ data = (desc->buf1 & DESC_EOR);
+ data |= DESC_ADDR(skb->data);
-static void adm5120_tx_timeout(struct net_device *dev)
-{
- printk(KERN_INFO "%s: TX timeout\n",dev->name);
-}
+ desc->misc =
+ ((skb->len<ETH_ZLEN?ETH_ZLEN:skb->len) << DESC_PKTLEN_SHIFT) |
+ (0x1 << priv->vlan_no);
-static struct net_device_stats *adm5120_sw_stats(struct net_device *dev)
-{
- struct adm5120_sw *priv = netdev_priv(dev);
- int portmask;
- unsigned long adm5120_cpup_conf_reg;
+ desc->buflen = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len;
- portmask = adm5120_eth_vlans[priv->port] & 0x3f;
+ desc->buf1 = data | DESC_OWN;
+ sw_write_reg(SWITCH_REG_SEND_TRIG, SEND_TRIG_STL);
- adm5120_cpup_conf_reg = adm5120_get_reg(ADM5120_CPUP_CONF);
+ cur_txl++;
+ if (cur_txl == dirty_txl + TX_QUEUE_LEN) {
+ for (i = 0; i < SWITCH_NUM_PORTS; i++) {
+ if (!adm5120_devs[i])
+ continue;
+ netif_stop_queue(adm5120_devs[i]);
+ }
+ }
- if (dev->flags & IFF_PROMISC)
- adm5120_cpup_conf_reg &= ~((portmask << ADM5120_DISUNSHIFT) & ADM5120_DISUNALL);
- else
- adm5120_cpup_conf_reg |= (portmask << ADM5120_DISUNSHIFT);
+ dev->trans_start = jiffies;
- if (dev->flags & IFF_PROMISC || dev->flags & IFF_ALLMULTI || dev->mc_count)
- adm5120_cpup_conf_reg &= ~((portmask << ADM5120_DISMCSHIFT) & ADM5120_DISMCALL);
- else
- adm5120_cpup_conf_reg |= (portmask << ADM5120_DISMCSHIFT);
-
- /* If there is any port configured to be in promiscuous mode, then the */
- /* Bridge Test Mode has to be activated. This will result in */
- /* transporting also packets learned in another VLAN to be forwarded */
- /* to the CPU. */
- /* The difficult scenario is when we want to build a bridge on the CPU.*/
- /* Assume we have port0 and the CPU port in VLAN0 and port1 and the */
- /* CPU port in VLAN1. Now we build a bridge on the CPU between */
- /* VLAN0 and VLAN1. Both ports of the VLANs are set in promisc mode. */
- /* Now assume a packet with ethernet source address 99 enters port 0 */
- /* It will be forwarded to the CPU because it is unknown. Then the */
- /* bridge in the CPU will send it to VLAN1 and it goes out at port 1. */
- /* When now a packet with ethernet destination address 99 comes in at */
- /* port 1 in VLAN1, then the switch has learned that this address is */
- /* located at port 0 in VLAN0. Therefore the switch will drop */
- /* this packet. In order to avoid this and to send the packet still */
- /* to the CPU, the Bridge Test Mode has to be activated. */
-
- /* Check if there is any vlan in promisc mode. */
- if (~adm5120_cpup_conf_reg & ADM5120_DISUNALL)
- adm5120_cpup_conf_reg |= ADM5120_BTM; /* Set the BTM */
- else
- adm5120_cpup_conf_reg &= ~ADM5120_BTM; /* Disable the BTM */
+ spin_unlock_irq(&tx_lock);
- adm5120_set_reg(ADM5120_CPUP_CONF,adm5120_cpup_conf_reg);
+ return 0;
+}
- return &((struct adm5120_sw *)netdev_priv(dev))->stats;
+static void adm5120_if_tx_timeout(struct net_device *dev)
+{
+ SW_INFO("TX timeout on %s\n",dev->name);
}
-static void adm5120_set_multicast_list(struct net_device *dev)
+static void adm5120_if_set_multicast_list(struct net_device *dev)
{
- struct adm5120_sw *priv = netdev_priv(dev);
- int portmask;
+ struct adm5120_if_priv *priv = netdev_priv(dev);
+ u32 ports;
+ u32 t;
- portmask = adm5120_eth_vlans[priv->port] & 0x3f;
+ ports = adm5120_eth_vlans[priv->vlan_no] & SWITCH_PORTS_NOCPU;
+ t = sw_read_reg(SWITCH_REG_CPUP_CONF);
if (dev->flags & IFF_PROMISC)
- adm5120_set_reg(ADM5120_CPUP_CONF,
- adm5120_get_reg(ADM5120_CPUP_CONF) &
- ~((portmask << ADM5120_DISUNSHIFT) & ADM5120_DISUNALL));
+ /* enable unknown packets */
+ t &= ~(ports << CPUP_CONF_DUNP_SHIFT);
else
- adm5120_set_reg(ADM5120_CPUP_CONF,
- adm5120_get_reg(ADM5120_CPUP_CONF) |
- (portmask << ADM5120_DISUNSHIFT));
+ /* disable unknown packets */
+ t |= (ports << CPUP_CONF_DUNP_SHIFT);
if (dev->flags & IFF_PROMISC || dev->flags & IFF_ALLMULTI ||
- dev->mc_count)
- adm5120_set_reg(ADM5120_CPUP_CONF,
- adm5120_get_reg(ADM5120_CPUP_CONF) &
- ~((portmask << ADM5120_DISMCSHIFT) & ADM5120_DISMCALL));
+ dev->mc_count)
+ /* enable multicast packets */
+ t &= ~(ports << CPUP_CONF_DMCP_SHIFT);
else
- adm5120_set_reg(ADM5120_CPUP_CONF,
- adm5120_get_reg(ADM5120_CPUP_CONF) |
- (portmask << ADM5120_DISMCSHIFT));
-}
-
-static void adm5120_write_mac(struct net_device *dev)
-{
- struct adm5120_sw *priv = netdev_priv(dev);
- unsigned char *mac = dev->dev_addr;
+ /* disable multicast packets */
+ t |= (ports << CPUP_CONF_DMCP_SHIFT);
+
+ /* If there is any port configured to be in promiscuous mode, then the */
+ /* Bridge Test Mode has to be activated. This will result in */
+ /* transporting also packets learned in another VLAN to be forwarded */
+ /* to the CPU. */
+ /* The difficult scenario is when we want to build a bridge on the CPU.*/
+ /* Assume we have port0 and the CPU port in VLAN0 and port1 and the */
+ /* CPU port in VLAN1. Now we build a bridge on the CPU between */
+ /* VLAN0 and VLAN1. Both ports of the VLANs are set in promisc mode. */
+ /* Now assume a packet with ethernet source address 99 enters port 0 */
+ /* It will be forwarded to the CPU because it is unknown. Then the */
+ /* bridge in the CPU will send it to VLAN1 and it goes out at port 1. */
+ /* When now a packet with ethernet destination address 99 comes in at */
+ /* port 1 in VLAN1, then the switch has learned that this address is */
+ /* located at port 0 in VLAN0. Therefore the switch will drop */
+ /* this packet. In order to avoid this and to send the packet still */
+ /* to the CPU, the Bridge Test Mode has to be activated. */
+
+ /* Check if there is any vlan in promisc mode. */
+ if (t & (SWITCH_PORTS_NOCPU << CPUP_CONF_DUNP_SHIFT))
+ t &= ~CPUP_CONF_BTM; /* Disable Bridge Testing Mode */
+ else
+ t |= CPUP_CONF_BTM; /* Enable Bridge Testing Mode */
- adm5120_set_reg(ADM5120_MAC_WT1,
- mac[2] | (mac[3]<<8) | (mac[4]<<16) | (mac[5]<<24));
- adm5120_set_reg(ADM5120_MAC_WT0, (priv->port<<3) |
- (mac[0]<<16) | (mac[1]<<24) | ADM5120_MAC_WRITE | ADM5120_VLAN_EN);
+ sw_write_reg(SWITCH_REG_CPUP_CONF, t);
- while (!(adm5120_get_reg(ADM5120_MAC_WT0) & ADM5120_MAC_WRITE_DONE));
}
-static int adm5120_sw_set_mac_address(struct net_device *dev, void *p)
+static int adm5120_if_set_mac_address(struct net_device *dev, void *p)
{
struct sockaddr *addr = p;
return 0;
}
-static int adm5120_do_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+static int adm5120_if_do_ioctl(struct net_device *dev, struct ifreq *rq,
+ int cmd)
{
int err;
struct adm5120_sw_info info;
- struct adm5120_sw *priv = netdev_priv(dev);
+ struct adm5120_if_priv *priv = netdev_priv(dev);
switch(cmd) {
- case SIOCGADMINFO:
- info.magic = 0x5120;
- info.ports = adm5120_nrdevs;
- info.vlan = priv->port;
- err = copy_to_user(rq->ifr_data, &info, sizeof(info));
- if (err)
- return -EFAULT;
- break;
- case SIOCSMATRIX:
- if (!capable(CAP_NET_ADMIN))
- return -EPERM;
- err = copy_from_user(adm5120_eth_vlans, rq->ifr_data,
- sizeof(adm5120_eth_vlans));
- if (err)
- return -EFAULT;
- adm5120_set_vlan(adm5120_eth_vlans);
- break;
- case SIOCGMATRIX:
- err = copy_to_user(rq->ifr_data, adm5120_eth_vlans,
- sizeof(adm5120_eth_vlans));
- if (err)
- return -EFAULT;
- break;
- case SIOCGETBW:
- err = copy_to_user(rq->ifr_data, bw_matrix, sizeof(bw_matrix));
- if (err)
- return -EFAULT;
- break;
- case SIOCSETBW:
- if (!capable(CAP_NET_ADMIN))
- return -EPERM;
- err = copy_from_user(bw_matrix, rq->ifr_data, sizeof(bw_matrix));
- if (err)
- return -EFAULT;
- adm5120_set_bw(bw_matrix);
- break;
- default:
- return -EOPNOTSUPP;
+ case SIOCGADMINFO:
+ info.magic = 0x5120;
+ info.ports = adm5120_nrdevs;
+ info.vlan = priv->vlan_no;
+ err = copy_to_user(rq->ifr_data, &info, sizeof(info));
+ if (err)
+ return -EFAULT;
+ break;
+ case SIOCSMATRIX:
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+ err = copy_from_user(adm5120_eth_vlans, rq->ifr_data,
+ sizeof(adm5120_eth_vlans));
+ if (err)
+ return -EFAULT;
+ adm5120_set_vlan(adm5120_eth_vlans);
+ break;
+ case SIOCGMATRIX:
+ err = copy_to_user(rq->ifr_data, adm5120_eth_vlans,
+ sizeof(adm5120_eth_vlans));
+ if (err)
+ return -EFAULT;
+ break;
+ default:
+ return -EOPNOTSUPP;
}
return 0;
}
-static void adm5120_dma_tx_init(struct adm5120_dma *dma, struct sk_buff **skbl,
- int num)
+static struct net_device *adm5120_if_alloc(void)
{
- memset(dma, 0, sizeof(struct adm5120_dma)*num);
- dma[num-1].data |= ADM5120_DMA_RINGEND;
- memset(skbl, 0, sizeof(struct skb*)*num);
+ struct net_device *dev;
+ struct adm5120_if_priv *priv;
+
+ dev = alloc_etherdev(sizeof(*priv));
+ if (!dev)
+ return NULL;
+
+ priv = netdev_priv(dev);
+ priv->dev = dev;
+
+ dev->irq = ADM5120_IRQ_SWITCH;
+ dev->open = adm5120_if_open;
+ dev->hard_start_xmit = adm5120_if_hard_start_xmit;
+ dev->stop = adm5120_if_stop;
+ dev->set_multicast_list = adm5120_if_set_multicast_list;
+ dev->do_ioctl = adm5120_if_do_ioctl;
+ dev->tx_timeout = adm5120_if_tx_timeout;
+ dev->watchdog_timeo = TX_TIMEOUT;
+ dev->set_mac_address = adm5120_if_set_mac_address;
+
+#ifdef CONFIG_ADM5120_SWITCH_NAPI
+ netif_napi_add(dev, &priv->napi, adm5120_if_poll, 64);
+#endif
+
+ return dev;
}
-static void adm5120_dma_rx_init(struct adm5120_dma *dma, struct sk_buff **skbl,
- int num)
+/* ------------------------------------------------------------------------ */
+
+static void adm5120_switch_cleanup(void)
{
int i;
- memset(dma, 0, sizeof(struct adm5120_dma)*num);
- for (i=0; i<num; i++) {
- skbl[i] = dev_alloc_skb(ADM5120_DMA_RXSIZE+16);
- if (!skbl[i]) {
- i=num;
- break;
+ /* disable interrupts */
+ sw_int_mask(SWITCH_INTS_ALL);
+
+ for (i = 0; i < SWITCH_NUM_PORTS; i++) {
+ struct net_device *dev = adm5120_devs[i];
+ if (dev) {
+ unregister_netdev(dev);
+ free_netdev(dev);
}
- skb_reserve(skbl[i], NET_IP_ALIGN);
- adm5120_rx_dma_update(&dma[i], skbl[i], (num-1==i));
}
+
+ adm5120_switch_tx_ring_free();
+ adm5120_switch_rx_ring_free();
}
-static int __init adm5120_sw_init(void)
+static int __init adm5120_switch_probe(struct platform_device *pdev)
{
+ u32 t;
int i, err;
- struct net_device *dev;
- err = request_irq(ADM5120_IRQ_SWITCH, adm5120_sw_irq, 0, "ethernet switch", NULL);
+ adm5120_nrdevs = adm5120_eth_num_ports;
+
+ t = CPUP_CONF_DCPUP | CPUP_CONF_CRCP |
+ SWITCH_PORTS_NOCPU << CPUP_CONF_DUNP_SHIFT |
+ SWITCH_PORTS_NOCPU << CPUP_CONF_DMCP_SHIFT ;
+ sw_write_reg(SWITCH_REG_CPUP_CONF, t);
+
+ t = (SWITCH_PORTS_NOCPU << PORT_CONF0_EMCP_SHIFT) |
+ (SWITCH_PORTS_NOCPU << PORT_CONF0_BP_SHIFT) |
+ (SWITCH_PORTS_NOCPU);
+ sw_write_reg(SWITCH_REG_PORT_CONF0, t);
+
+ /* setup ports to Autoneg/100M/Full duplex/Auto MDIX */
+ t = SWITCH_PORTS_PHY |
+ (SWITCH_PORTS_PHY << PHY_CNTL2_SC_SHIFT) |
+ (SWITCH_PORTS_PHY << PHY_CNTL2_DC_SHIFT) |
+ (SWITCH_PORTS_PHY << PHY_CNTL2_PHYR_SHIFT) |
+ (SWITCH_PORTS_PHY << PHY_CNTL2_AMDIX_SHIFT) |
+ PHY_CNTL2_RMAE;
+ sw_write_reg(SWITCH_REG_PHY_CNTL2, t);
+
+ t = sw_read_reg(SWITCH_REG_PHY_CNTL3);
+ t |= PHY_CNTL3_RNT;
+ sw_write_reg(SWITCH_REG_PHY_CNTL3, t);
+
+ /* Force all the packets from all ports are low priority */
+ sw_write_reg(SWITCH_REG_PRI_CNTL, 0);
+
+ sw_int_mask(SWITCH_INTS_ALL);
+ sw_int_ack(SWITCH_INTS_ALL);
+
+ err = adm5120_switch_rx_ring_alloc();
if (err)
- goto out;
+ goto err;
- adm5120_nrdevs = adm5120_eth_num_ports;
+ err = adm5120_switch_tx_ring_alloc();
+ if (err)
+ goto err;
- adm5120_set_reg(ADM5120_CPUP_CONF,
- ADM5120_DISCCPUPORT | ADM5120_CRC_PADDING |
- ADM5120_DISUNALL | ADM5120_DISMCALL);
- adm5120_set_reg(ADM5120_PORT_CONF0, ADM5120_ENMC | ADM5120_ENBP | ADM5120_PORTDISALL);
+ adm5120_switch_tx_ring_reset(txl_descs, txl_skbuff, TX_RING_SIZE);
+ adm5120_switch_rx_ring_reset(rxl_descs, rxl_skbuff, RX_RING_SIZE);
- adm5120_set_reg(ADM5120_PHY_CNTL2, adm5120_get_reg(ADM5120_PHY_CNTL2) |
- ADM5120_AUTONEG | ADM5120_NORMAL | ADM5120_AUTOMDIX);
- adm5120_set_reg(ADM5120_PHY_CNTL3, adm5120_get_reg(ADM5120_PHY_CNTL3) |
- ADM5120_PHY_NTH);
+ sw_write_reg(SWITCH_REG_SHDA, 0);
+ sw_write_reg(SWITCH_REG_SLDA, KSEG1ADDR(txl_descs));
+ sw_write_reg(SWITCH_REG_RHDA, 0);
+ sw_write_reg(SWITCH_REG_RLDA, KSEG1ADDR(rxl_descs));
- /* Force all the packets from all ports are low priority */
- adm5120_set_reg(ADM5120_PRI_CNTL, 0);
-
- adm5120_set_reg(ADM5120_INT_MASK, ADM5120_INTMASKALL);
- adm5120_set_reg(ADM5120_INT_ST, ADM5120_INTMASKALL);
-
- adm5120_dma_txh = (void *)KSEG1ADDR((u32)adm5120_dma_txh_v);
- adm5120_dma_txl = (void *)KSEG1ADDR((u32)adm5120_dma_txl_v);
- adm5120_dma_rxh = (void *)KSEG1ADDR((u32)adm5120_dma_rxh_v);
- adm5120_dma_rxl = (void *)KSEG1ADDR((u32)adm5120_dma_rxl_v);
-
- adm5120_dma_tx_init(adm5120_dma_txh, adm5120_skb_txh, ADM5120_DMA_TXH);
- adm5120_dma_tx_init(adm5120_dma_txl, adm5120_skb_txl, ADM5120_DMA_TXL);
- adm5120_dma_rx_init(adm5120_dma_rxh, adm5120_skb_rxh, ADM5120_DMA_RXH);
- adm5120_dma_rx_init(adm5120_dma_rxl, adm5120_skb_rxl, ADM5120_DMA_RXL);
- adm5120_set_reg(ADM5120_SEND_HBADDR, KSEG1ADDR(adm5120_dma_txh));
- adm5120_set_reg(ADM5120_SEND_LBADDR, KSEG1ADDR(adm5120_dma_txl));
- adm5120_set_reg(ADM5120_RECEIVE_HBADDR, KSEG1ADDR(adm5120_dma_rxh));
- adm5120_set_reg(ADM5120_RECEIVE_LBADDR, KSEG1ADDR(adm5120_dma_rxl));
-
- for (i = 0; i < SW_DEVS; i++) {
- adm5120_devs[i] = alloc_etherdev(sizeof(struct adm5120_sw));
- if (!adm5120_devs[i]) {
+ for (i = 0; i < SWITCH_NUM_PORTS; i++) {
+ struct net_device *dev;
+ struct adm5120_if_priv *priv;
+
+ dev = adm5120_if_alloc();
+ if (!dev) {
err = -ENOMEM;
- goto out_int;
+ goto err;
}
- dev = adm5120_devs[i];
- SET_MODULE_OWNER(dev);
- memset(netdev_priv(dev), 0, sizeof(struct adm5120_sw));
- ((struct adm5120_sw*)netdev_priv(dev))->port = i;
- dev->base_addr = SW_BASE;
- dev->irq = ADM5120_IRQ_SWITCH;
- dev->open = adm5120_sw_open;
- dev->hard_start_xmit = adm5120_sw_tx;
- dev->stop = adm5120_sw_stop;
- dev->get_stats = adm5120_sw_stats;
- dev->set_multicast_list = adm5120_set_multicast_list;
- dev->do_ioctl = adm5120_do_ioctl;
- dev->tx_timeout = adm5120_tx_timeout;
- dev->watchdog_timeo = ETH_TX_TIMEOUT;
- dev->set_mac_address = adm5120_sw_set_mac_address;
- dev->poll = adm5120_rx;
- dev->weight = 64;
+ adm5120_devs[i] = dev;
+ priv = netdev_priv(dev);
+
+ priv->vlan_no = i;
+ priv->port_mask = adm5120_eth_vlans[i];
memcpy(dev->dev_addr, adm5120_eth_macs[i], 6);
adm5120_write_mac(dev);
- if ((err = register_netdev(dev))) {
- free_netdev(dev);
- goto out_int;
+ err = register_netdev(dev);
+ if (err) {
+ SW_INFO("%s register failed, error=%d\n",
+ dev->name, err);
+ goto err;
}
- printk(KERN_INFO "%s: ADM5120 switch port%d\n", dev->name, i);
}
+
/* setup vlan/port mapping after devs are filled up */
adm5120_set_vlan(adm5120_eth_vlans);
- adm5120_set_reg(ADM5120_CPUP_CONF,
- ADM5120_CRC_PADDING | ADM5120_DISUNALL | ADM5120_DISMCALL);
+ /* enable CPU port */
+ t = sw_read_reg(SWITCH_REG_CPUP_CONF);
+ t &= ~CPUP_CONF_DCPUP;
+ sw_write_reg(SWITCH_REG_CPUP_CONF, t);
return 0;
-out_int:
- /* Undo everything that did succeed */
- for (; i; i--) {
- unregister_netdev(adm5120_devs[i-1]);
- free_netdev(adm5120_devs[i-1]);
- }
- free_irq(ADM5120_IRQ_SWITCH, NULL);
-out:
- printk(KERN_ERR "ADM5120 Ethernet switch init failed\n");
+err:
+ adm5120_switch_cleanup();
+
+ SW_ERR("init failed\n");
return err;
}
-static void __exit adm5120_sw_exit(void)
+static int adm5120_switch_remove(struct platform_device *dev)
{
- int i;
+ adm5120_switch_cleanup();
+ return 0;
+}
- for (i = 0; i < SW_DEVS; i++) {
- unregister_netdev(adm5120_devs[i]);
- free_netdev(adm5120_devs[i]);
- }
+static struct platform_driver adm5120_switch_driver = {
+ .probe = adm5120_switch_probe,
+ .remove = adm5120_switch_remove,
+ .driver = {
+ .name = DRV_NAME,
+ },
+};
- free_irq(ADM5120_IRQ_SWITCH, NULL);
+/* -------------------------------------------------------------------------- */
- for (i = 0; i < ADM5120_DMA_RXH; i++) {
- if (!adm5120_skb_rxh[i])
- break;
- kfree_skb(adm5120_skb_rxh[i]);
- }
- for (i = 0; i < ADM5120_DMA_RXL; i++) {
- if (!adm5120_skb_rxl[i])
- break;
- kfree_skb(adm5120_skb_rxl[i]);
- }
+static int __init adm5120_switch_mod_init(void)
+{
+ int err;
+
+ pr_info(DRV_DESC " version " DRV_VERSION "\n");
+ err = platform_driver_register(&adm5120_switch_driver);
+
+ return err;
}
-module_init(adm5120_sw_init);
-module_exit(adm5120_sw_exit);
+static void __exit adm5120_switch_mod_exit(void)
+{
+ platform_driver_unregister(&adm5120_switch_driver);
+}
+
+module_init(adm5120_switch_mod_init);
+module_exit(adm5120_switch_mod_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Gabor Juhos <juhosg at openwrt.org>");
+MODULE_DESCRIPTION(DRV_DESC);
+MODULE_VERSION(DRV_VERSION);
projects / openwrt.git / blobdiff