add another batch of ar7 cleanups and an ar7 watchdog timer (thx enrik!). also seems...

[openwrt.git] / openwrt / target / linux / linux-2.4 / patches / ar7 / 003-net_driver_cpmac.patch

diff --git a/openwrt/target/linux/linux-2.4/patches/ar7/003-net_driver_cpmac.patch b/openwrt/target/linux/linux-2.4/patches/ar7/003-net_driver_cpmac.patch
index e2b2ddd..1132991 100644 (file)
--- a/openwrt/target/linux/linux-2.4/patches/ar7/003-net_driver_cpmac.patch
+++ b/openwrt/target/linux/linux-2.4/patches/ar7/003-net_driver_cpmac.patch
@@ -815,8 +815,8 @@ diff -urN linux.old/drivers/net/avalanche_cpmac/cpcommon_cpmac.h linux.dev/drive
 +
 diff -urN linux.old/drivers/net/avalanche_cpmac/cpmac.c linux.dev/drivers/net/avalanche_cpmac/cpmac.c
 --- linux.old/drivers/net/avalanche_cpmac/cpmac.c      1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/net/avalanche_cpmac/cpmac.c      2005-07-12 03:21:00.298934472 +0200
-@@ -0,0 +1,2509 @@
++++ linux.dev/drivers/net/avalanche_cpmac/cpmac.c      2005-07-22 01:03:12.609318544 +0200
+@@ -0,0 +1,2504 @@
 +/******************************************************************************
 + * FILE PURPOSE:    CPMAC Linux Network Device Driver Source
 + ******************************************************************************
@@ -2902,7 +2902,7 @@ diff -urN linux.old/drivers/net/avalanche_cpmac/cpmac.c linux.dev/drivers/net/av
 +        /* OS Needs to supply CORRECT frequency */
 +        if(cpmac_ci_strcmp(action, "Get") == 0 && value != NULL)
 +        {
-+            *(unsigned int *)value = CONFIG_AR7_SYS_FREQUENCY * 1000 * 1000;
++            *(unsigned int *)value = CONFIG_AR7_SYS * 1000 * 1000;
 +            ret_val = 0;
 +        }
 +    }
@@ -2921,7 +2921,7 @@ diff -urN linux.old/drivers/net/avalanche_cpmac/cpmac.c linux.dev/drivers/net/av
 +        /* For Sangam MdioBusFreq is off the PBUS */
 +        if(cpmac_ci_strcmp(action, "Get") == 0 && value != NULL)
 +        {
-+            *(unsigned int *)value = CONFIG_AR7_SYS_FREQUENCY * 1000 * 1000;
++            *(unsigned int *)value = CONFIG_AR7_SYS * 1000 * 1000;
 +            ret_val = 0;
 +        }
 +    }
@@ -3035,12 +3035,7 @@ diff -urN linux.old/drivers/net/avalanche_cpmac/cpmac.c linux.dev/drivers/net/av
 +    skb_trim(p_skb, packet_size);                                                                                            
 +#endif 
 + 
-+#ifndef TI_SLOW_PATH
-+    /* TI Optimization: This is NOT required if the ethernet resides below the bridge. But is
-+    * required only if the ethernet is directly connected to the IP stack. */
-+    if (p_dev->br_port == NULL)   
-+#endif
-+       p_skb->protocol = eth_type_trans(p_skb, p_dev);
++    p_skb->protocol = eth_type_trans(p_skb, p_dev);
 +
 +    netif_rx(p_skb);
 +
@@ -3148,7 +3143,7 @@ diff -urN linux.old/drivers/net/avalanche_cpmac/cpmac.c linux.dev/drivers/net/av
 +    int     instance_count = CONFIG_MIPS_CPMAC_PORTS;
 +
 +    //cpmac_cpu_freq = avalanche_clkc_get_freq(CLKC_MIPS);
-+    cpmac_cpu_freq = CONFIG_AR7_CPU_FREQUENCY * 1000 * 1000;
++    cpmac_cpu_freq = CONFIG_AR7_CPU * 1000 * 1000;
 +
 +    build_psp_config();                       
 +
@@ -11176,7 +11171,7 @@ diff -urN linux.old/drivers/net/avalanche_cpmac/psp_config_build.c linux.dev/dri
 +    unsigned int j= 0, detected_phy_map = 0, auto_select = SELECT_INT_PHY_MAC;
 +                                                                                                                   
 +    *reset_cntl |= (1 << AVALANCHE_MDIO_RESET_BIT) | (1 << AVALANCHE_LOW_CPMAC_RESET_BIT) | (1 << AVALANCHE_HIGH_CPMAC_RESET_BIT) | (1 << AVALANCHE_LOW_EPHY_RESET_BIT);                                 
-+    *mdio_cntl   = (1 << 30) | ((CONFIG_AR7_SYS_FREQUENCY * 1000)/2200);                                              
++    *mdio_cntl   = (1 << 30) | ((CONFIG_AR7_SYS * 1000)/2200);                                              
 +                                                                                                                   
 +    for(j=0;j < 300000; j++) 
 +    { 
@@ -13322,3 +13317,25 @@ diff -urN linux.old/drivers/net/Makefile linux.dev/drivers/net/Makefile
  # link order important here
  #
  obj-$(CONFIG_PLIP) += plip.o
+--- linux.old/drivers/net/avalanche_cpmac/cpmac.c      2005-08-25 10:56:33.702931008 +0200
++++ linux.dev/drivers/net/avalanche_cpmac/cpmac.c      2005-08-25 11:08:45.027451520 +0200
+@@ -2158,17 +2158,16 @@
+     CPMAC_PRIVATE_INFO_T *p_cpmac_priv  = p_dev->priv;
+     CPMAC_DRV_HAL_INFO_T *p_drv_hal     = p_cpmac_priv->drv_hal;
+     struct sk_buff       *p_skb         = fragList[0].OsInfo;
+-    p_skb->len                          = fragList[0].len;    
+ 
+     /* invalidate the cache. */
+     dma_cache_inv((unsigned long)p_skb->data, fragList[0].len);    
+ #ifdef CPMAC_TEST
+-    xdump(p_skb->data, p_skb->len, "recv");
++    xdump(p_skb->data, fragList[0].len, "recv");
+ #endif
+ #ifdef CPMAC_8021Q_SUPPORT
+     /* 802.1q stuff, just does the basic checking here. */
+     if(!p_cpmac_priv->enable_802_1q      &&
+-       p_skb->len > TCI_END_OFFSET       &&
++       fragList[0].len > TCI_END_OFFSET       &&
+        IS_802_1Q_FRAME(p_skb->data + TPID_START_OFFSET))
+     {
+          goto cpmac_hal_recv_frame_mismatch;