Changed pin selections in low-level mmc driver

[openwrt.git] / target / linux / rb532-2.6 / image / Makefile

diff --git a/target/linux/rb532-2.6/image/Makefile b/target/linux/rb532-2.6/image/Makefile
index 1f3a88b..149a7e2 100644 (file)
--- a/target/linux/rb532-2.6/image/Makefile
+++ b/target/linux/rb532-2.6/image/Makefile
@@ -25,35 +25,33 @@ define Build/Compile
 endef
 
 define Build/Clean
 endef
 
 define Build/Clean

-       $(MAKE) -C ../../generic-2.6/image/lzma-loader $(LOADER_MAKEOPTS) clean
+       $(MAKE) -C $(GENERIC_PLATFORM_DIR)/image/lzma-loader $(LOADER_MAKEOPTS) clean

 endef
 
 define Image/Prepare
 endef
 
 define Image/Prepare

-       $(STAGING_DIR)/bin/patch-cmdline $(LINUX_DIR)/vmlinux 'root=/dev/cfa2 '
-       $(KERNEL_CROSS)objcopy -O binary -R .reginfo -R .note -R .comment -R .mdebug -S $(LINUX_DIR)/vmlinux $(LINUX_KERNEL)
+       cat $(KDIR)/vmlinux | $(STAGING_DIR)/bin/lzma e -si -so -eos -lc1 -lp2 -pb2 > $(KDIR)/vmlinux.lzma
+       $(MAKE) -C $(GENERIC_PLATFORM_DIR)/image/lzma-loader $(LOADER_MAKEOPTS) clean compile

 endef
 
 define Image/BuildKernel
 endef
 
 define Image/BuildKernel

-       cat $(KDIR)/vmlinux | $(STAGING_DIR)/bin/lzma e -si -so -eos -lc1 -lp2 -pb2 > $(KDIR)/vmlinux.lzma
-       $(MAKE) -C ../../generic-2.6/image/lzma-loader $(LOADER_MAKEOPTS) clean compile

        $(CP) $(KDIR)/loader.elf $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-vmlinux
 endef
 
 define Image/cmdline/jffs2-64k
        $(CP) $(KDIR)/loader.elf $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-vmlinux
 endef
 
 define Image/cmdline/jffs2-64k

-block2mtd.block2mtd=/dev/cfa2,65536 root=/dev/mtdblock0 rootfstype=jffs2
+block2mtd.block2mtd=/dev/cfa2,65536 root=/dev/mtdblock0 rootfstype=jffs2 init=/etc/preinit

 endef
 
 define Image/cmdline/jffs2-128k
 endef
 
 define Image/cmdline/jffs2-128k

-block2mtd.block2mtd=/dev/cfa2,131072 root=/dev/mtdblock0 rootfstype=jffs2
+block2mtd.block2mtd=/dev/cfa2,131072 root=/dev/mtdblock0 rootfstype=jffs2 init=/etc/preinit

 endef
 
 define Image/cmdline/ext2
 endef
 
 define Image/cmdline/ext2

-root=/dev/cfa2 rootfstype=ext2
+root=/dev/cfa2 rootfstype=ext2 init=/etc/preinit

 endef
 
 define Image/Build
 endef
 
 define Image/Build

-       $(STAGING_DIR)/bin/patch-cmdline $(LINUX_DIR)/vmlinux '$(strip $(call Image/cmdline/$(1))) '
-       ./gen_image.sh $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).bin 4 $(LINUX_DIR)/vmlinux 16 $(KDIR)/root.$(1)
+       $(STAGING_DIR)/bin/patch-cmdline $(KDIR)/vmlinux.elf '$(strip $(call Image/cmdline/$(1))) '
+       ./gen_image.sh $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).bin 4 $(KDIR)/vmlinux.elf $(CONFIG_TARGET_ROOTFS_FSPART) $(KDIR)/root.$(1)

 endef
 
 $(eval $(call BuildImage))
 endef
 
 $(eval $(call BuildImage))