-#
-# Copyright (C) 2006 OpenWrt.org
+#
+# Copyright (C) 2006-2010 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
-# $Id$
-USBMENU:=USB Support
+USB_MENU:=USB Support
+
+USBNET_DIR:=net/usb
+USBHID_DIR?=hid/usbhid
+USBINPUT_DIR?=input/misc
define KernelPackage/usb-core
+ SUBMENU:=$(USB_MENU)
TITLE:=Support for USB
- DESCRIPTION:=Kernel support for USB
- DEPENDS:=@USB_SUPPORT
- KCONFIG:=$(CONFIG_USB)
- SUBMENU:=$(USBMENU)
- AUTOLOAD:=$(call AutoLoad,20,usbcore)
+ DEPENDS:=@USB_SUPPORT +kmod-nls-base
+ KCONFIG:=CONFIG_USB
+ FILES:=$(LINUX_DIR)/drivers/usb/core/usbcore.ko
+ AUTOLOAD:=$(call AutoLoad,20,usbcore,1)
endef
-define KernelPackage/usb-core/2.4
- FILES:=$(LINUX_DIR)/drivers/usb/usbcore.$(LINUX_KMOD_SUFFIX)
+define KernelPackage/usb-core/description
+ Kernel support for USB
endef
-define KernelPackage/usb-core/2.6
- FILES:=$(LINUX_DIR)/drivers/usb/core/usbcore.$(LINUX_KMOD_SUFFIX)
-endef
$(eval $(call KernelPackage,usb-core))
-define KernelPackage/usb-uhci
- TITLE:=Support for UHCI controllers
- DESCRIPTION:=Kernel support for USB UHCI controllers
- DEPENDS:=kmod-usb-core
- SUBMENU:=$(USBMENU)
+define AddDepends/usb
+ SUBMENU:=$(USB_MENU)
+ DEPENDS+=+!TARGET_etrax:kmod-usb-core $(1)
endef
-define KernelPackage/usb-uhci/2.4
- FILES:=$(LINUX_DIR)/drivers/usb/host/uhci.o
- KCONFIG:=$(CONFIG_USB_UHCI_ALT)
- AUTOLOAD:=$(call AutoLoad,50,uhci)
-endef
-define KernelPackage/usb-uhci/2.6
+define KernelPackage/usb-uhci
+ TITLE:=Support for UHCI controllers
+ KCONFIG:= \
+ CONFIG_USB_UHCI_ALT \
+ CONFIG_USB_UHCI_HCD
FILES:=$(LINUX_DIR)/drivers/usb/host/uhci-hcd.ko
- KCONFIG:=$(CONFIG_USB_UHCI_HCD)
- AUTOLOAD:=$(call AutoLoad,50,uhci-hcd)
+ AUTOLOAD:=$(call AutoLoad,50,uhci-hcd,1)
+ $(call AddDepends/usb)
endef
-$(eval $(call KernelPackage,usb-uhci))
-define KernelPackage/usb-uhci-iv
- TITLE:=Support for Intel/VIA UHCI controllers
- DESCRIPTION:=Kernel support for Intel/VIA USB UHCI controllers
- DEPENDS:=kmod-usb-core @LINUX_2_4
- SUBMENU:=$(USBMENU)
-endef
+define KernelPackage/usb-uhci/description
+ Kernel support for USB UHCI controllers
+endef
+
+$(eval $(call KernelPackage,usb-uhci,1))
-define KernelPackage/usb-uhci-iv/2.4
- FILES:=$(LINUX_DIR)/drivers/usb/host/usb-uhci.$(LINUX_KMOD_SUFFIX)
- KCONFIG:=$(CONFIG_USB_UHCI)
- AUTOLOAD:=$(call AutoLoad,50,usb-uhci)
-endef
-$(eval $(call KernelPackage,usb-uhci-iv))
define KernelPackage/usb-ohci
TITLE:=Support for OHCI controllers
- DESCRIPTION:=Kernel support for USB OHCI controllers
- DEPENDS:=kmod-usb-core
- SUBMENU:=$(USBMENU)
+ KCONFIG:= \
+ CONFIG_USB_OHCI \
+ CONFIG_USB_OHCI_HCD \
+ CONFIG_USB_OHCI_AR71XX=y
+ FILES:=$(LINUX_DIR)/drivers/usb/host/ohci-hcd.ko
+ AUTOLOAD:=$(call AutoLoad,50,ohci-hcd,1)
+ $(call AddDepends/usb)
endef
-define KernelPackage/usb-ohci/2.4
- FILES:=$(LINUX_DIR)/drivers/usb/host/usb-ohci.o
- KCONFIG:=$(CONFIG_USB_OHCI)
- AUTOLOAD:=$(call AutoLoad,50,usb-ohci)
+define KernelPackage/usb-ohci/description
+ Kernel support for USB OHCI controllers
endef
-define KernelPackage/usb-ohci/2.6
- FILES:=$(LINUX_DIR)/drivers/usb/host/ohci-hcd.ko
- KCONFIG:=$(CONFIG_USB_OHCI_HCD)
- AUTOLOAD:=$(call AutoLoad,50,ohci-hcd)
+$(eval $(call KernelPackage,usb-ohci,1))
+
+
+define KernelPackage/usb-isp116x-hcd
+ TITLE:=Support for the ISP116x USB Host Controller
+ DEPENDS:=@TARGET_ppc40x
+ KCONFIG:= \
+ CONFIG_USB_ISP116X_HCD \
+ CONFIG_USB_ISP116X_HCD_OF=y \
+ CONFIG_USB_ISP116X_HCD_PLATFORM=n
+ FILES:=$(LINUX_DIR)/drivers/usb/host/isp116x-hcd.ko
+ AUTOLOAD:=$(call AutoLoad,50,isp116x-hcd)
+ $(call AddDepends/usb)
endef
-$(eval $(call KernelPackage,usb-ohci))
+
+define KernelPackage/usb-isp116x-hcd/description
+ Kernel support for the ISP116X USB Host Controller
+endef
+
+$(eval $(call KernelPackage,usb-isp116x-hcd))
+
define KernelPackage/usb2
TITLE:=Support for USB2 controllers
- DESCRIPTION:=Kernel support for USB2 (EHCI) controllers
- DEPENDS:=kmod-usb-core
- KCONFIG:=$(CONFIG_USB)
- SUBMENU:=$(USBMENU)
- FILES:=$(LINUX_DIR)/drivers/usb/host/ehci-hcd.$(LINUX_KMOD_SUFFIX)
- KCONFIG:=$(CONFIG_USB_EHCI_HCD)
- AUTOLOAD:=$(call AutoLoad,50,ehci-hcd)
+ KCONFIG:=CONFIG_USB_EHCI_HCD \
+ CONFIG_USB_EHCI_AR71XX=y
+ FILES:=$(LINUX_DIR)/drivers/usb/host/ehci-hcd.ko
+ AUTOLOAD:=$(call AutoLoad,40,ehci-hcd,1)
+ $(call AddDepends/usb)
endef
-$(eval $(call KernelPackage,usb2))
-
-define usbdep
- SUBMENU:=$(USBMENU)
- DEPENDS:=kmod-usb-core $(1)
+define KernelPackage/usb2/description
+ Kernel support for USB2 (EHCI) controllers
endef
+$(eval $(call KernelPackage,usb2))
+
define KernelPackage/usb-acm
- $(call usbdep,)
TITLE:=Support for modems/isdn controllers
- DESCRIPTION:=Kernel support for USB ACM devices (modems/isdn controllers)
- KCONFIG:=$(CONFIG_USB_ACM)
+ KCONFIG:=CONFIG_USB_ACM
+ FILES:=$(LINUX_DIR)/drivers/usb/class/cdc-acm.ko
+ AUTOLOAD:=$(call AutoLoad,60,cdc-acm)
+$(call AddDepends/usb)
endef
-define KernelPackage/usb-acm/2.4
- FILES:=$(LINUX_DIR)/drivers/usb/acm.o
- AUTOLOAD:=$(call AutoLoad,60,acm)
+define KernelPackage/usb-acm/description
+ Kernel support for USB ACM devices (modems/isdn controllers)
endef
-define KernelPackage/usb-acm/2.6
- FILES:=$(LINUX_DIR)/drivers/usb/class/cdc-acm.ko
- AUTOLOAD:=$(call AutoLoad,60,cdc-acm)
-endef
$(eval $(call KernelPackage,usb-acm))
define KernelPackage/usb-audio
- $(call usbdep,+kmod-soundcore)
- TITLE:=Support for audio devices
- DESCRIPTION:=Kernel support for USB audio devices
-endef
-
-define KernelPackage/usb-audio/2.4
- KCONFIG:=$(CONFIG_USB_AUDIO)
- FILES:=$(LINUX_DIR)/drivers/usb/audio.o
- AUTOLOAD:=$(call AutoLoad,60,audio)
-endef
-
-define KernelPackage/usb-audio/2.6
- KCONFIG:=$(CONFIG_SND_USB_AUDIO)
+ TITLE:=Support for USB audio devices
+ KCONFIG:= \
+ CONFIG_USB_AUDIO \
+ CONFIG_SND_USB_AUDIO
+ $(call AddDepends/usb)
+ $(call AddDepends/sound)
+ifeq ($(strip $(call CompareKernelPatchVer,$(KERNEL_PATCHVER),ge,2.6.35)),1)
+ FILES:= \
+ $(LINUX_DIR)/sound/usb/snd-usbmidi-lib.ko \
+ $(LINUX_DIR)/sound/usb/snd-usb-audio.ko
+ AUTOLOAD:=$(call AutoLoad,60,snd-usbmidi-lib snd-usb-audio)
+else
FILES:= \
$(LINUX_DIR)/sound/usb/snd-usb-lib.ko \
$(LINUX_DIR)/sound/usb/snd-usb-audio.ko
AUTOLOAD:=$(call AutoLoad,60,snd-usb-lib snd-usb-audio)
+endif
endef
+
+define KernelPackage/usb-audio/description
+ Kernel support for USB audio devices
+endef
+
$(eval $(call KernelPackage,usb-audio))
define KernelPackage/usb-printer
- $(call usbdep,)
TITLE:=Support for printers
- DESCRIPTION:=Kernel support for USB printers
- KCONFIG:=$(CONFIG_USB_PRINTER)
+ KCONFIG:=CONFIG_USB_PRINTER
+ FILES:=$(LINUX_DIR)/drivers/usb/class/usblp.ko
+ AUTOLOAD:=$(call AutoLoad,60,usblp)
+ $(call AddDepends/usb)
endef
-define KernelPackage/usb-printer/2.4
- FILES:=$(LINUX_DIR)/drivers/usb/printer.o
- AUTOLOAD:=$(call AutoLoad,60,printer)
+define KernelPackage/usb-printer/description
+ Kernel support for USB printers
endef
-define KernelPackage/usb-printer/2.6
- FILES:=$(LINUX_DIR)/drivers/usb/class/usblp.ko
- AUTOLOAD:=$(call AutoLoad,60,usblp)
-endef
$(eval $(call KernelPackage,usb-printer))
define KernelPackage/usb-serial
- $(call usbdep,)
TITLE:=Support for USB-to-Serial converters
- DESCRIPTION:=Kernel support for USB-to-Serial converters
- KCONFIG:=$(CONFIG_USB_SERIAL)
- FILES:=$(LINUX_DIR)/drivers/usb/serial/usbserial.$(LINUX_KMOD_SUFFIX)
+ KCONFIG:=CONFIG_USB_SERIAL
+ FILES:=$(LINUX_DIR)/drivers/usb/serial/usbserial.ko
AUTOLOAD:=$(call AutoLoad,60,usbserial)
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-serial/description
+ Kernel support for USB-to-Serial converters
endef
+
$(eval $(call KernelPackage,usb-serial))
+
+define AddDepends/usb-serial
+ SUBMENU:=$(USB_MENU)
+ DEPENDS+=kmod-usb-serial $(1)
+endef
+
+
define KernelPackage/usb-serial-airprime
- TITLE:=Support for Airprime (EVDO)
- DESCRIPTION:=Kernel support for Airprime (EVDO)
- DEPENDS:=kmod-usb-serial
- SUBMENU:=$(USBMENU)
- KCONFIG:=$(CONFIG_USB_SERIAL_AIRPRIME)
- FILES:=$(LINUX_DIR)/drivers/usb/serial/airprime.$(LINUX_KMOD_SUFFIX)
+ TITLE:=Support for Airprime (EVDO)
+ KCONFIG:=CONFIG_USB_SERIAL_AIRPRIME
+ FILES:=$(LINUX_DIR)/drivers/usb/serial/airprime.ko
AUTOLOAD:=$(call AutoLoad,65,airprime)
+ $(call AddDepends/usb-serial)
+endef
+
+define KernelPackage/usb-serial-airprime/description
+ Kernel support for Airprime (EVDO)
endef
+
$(eval $(call KernelPackage,usb-serial-airprime))
+
define KernelPackage/usb-serial-belkin
TITLE:=Support for Belkin devices
- DESCRIPTION:=Kernel support for Belkin USB-to-Serial converters
- DEPENDS:=kmod-usb-serial
- SUBMENU:=$(USBMENU)
- KCONFIG:=$(CONFIG_USB_SERIAL_BELKIN)
- FILES:=$(LINUX_DIR)/drivers/usb/serial/belkin_sa.$(LINUX_KMOD_SUFFIX)
+ KCONFIG:=CONFIG_USB_SERIAL_BELKIN
+ FILES:=$(LINUX_DIR)/drivers/usb/serial/belkin_sa.ko
AUTOLOAD:=$(call AutoLoad,65,belkin_sa)
+ $(call AddDepends/usb-serial)
+endef
+
+define KernelPackage/usb-serial-belkin/description
+ Kernel support for Belkin USB-to-Serial converters
endef
+
$(eval $(call KernelPackage,usb-serial-belkin))
+define KernelPackage/usb-serial-ch341
+ TITLE:=Support for CH341 devices
+ KCONFIG:=CONFIG_USB_SERIAL_CH341
+ FILES:=$(LINUX_DIR)/drivers/usb/serial/ch341.ko
+ AUTOLOAD:=$(call AutoLoad,65,ch341)
+ $(call AddDepends/usb-serial)
+endef
+
+define KernelPackage/usb-serial-belkin/description
+ Kernel support for Winchiphead CH341 USB-to-Serial converters
+endef
+
+$(eval $(call KernelPackage,usb-serial-ch341))
+
+
define KernelPackage/usb-serial-ftdi
TITLE:=Support for FTDI devices
- DESCRIPTION:=Kernel support for FTDI USB-to-Serial converters
- DEPENDS:=kmod-usb-serial
- SUBMENU:=$(USBMENU)
- KCONFIG:=$(CONFIG_USB_SERIAL_FTDI_SIO)
- FILES:=$(LINUX_DIR)/drivers/usb/serial/ftdi_sio.$(LINUX_KMOD_SUFFIX)
+ KCONFIG:=CONFIG_USB_SERIAL_FTDI_SIO
+ FILES:=$(LINUX_DIR)/drivers/usb/serial/ftdi_sio.ko
AUTOLOAD:=$(call AutoLoad,65,ftdi_sio)
+ $(call AddDepends/usb-serial)
endef
+
+define KernelPackage/usb-serial-ftdi/description
+ Kernel support for FTDI USB-to-Serial converters
+endef
+
$(eval $(call KernelPackage,usb-serial-ftdi))
define KernelPackage/usb-serial-mct
TITLE:=Support for Magic Control Tech. devices
- DESCRIPTION:=Kernel support for Magic Control Technology USB-to-Serial converters
- DEPENDS:=kmod-usb-serial
- SUBMENU:=$(USBMENU)
- KCONFIG:=$(CONFIG_USB_SERIAL_MCT_U232)
- FILES:=$(LINUX_DIR)/drivers/usb/serial/mct_u232.$(LINUX_KMOD_SUFFIX)
+ KCONFIG:=CONFIG_USB_SERIAL_MCT_U232
+ FILES:=$(LINUX_DIR)/drivers/usb/serial/mct_u232.ko
AUTOLOAD:=$(call AutoLoad,65,mct_u232)
+ $(call AddDepends/usb-serial)
endef
+
+define KernelPackage/usb-serial-mct/description
+ Kernel support for Magic Control Technology USB-to-Serial converters
+endef
+
$(eval $(call KernelPackage,usb-serial-mct))
+
define KernelPackage/usb-serial-pl2303
TITLE:=Support for Prolific PL2303 devices
- DESCRIPTION:=Kernel support for Prolific PL2303 USB-to-Serial converters
- DEPENDS:=kmod-usb-serial
- SUBMENU:=$(USBMENU)
- KCONFIG:=$(CONFIG_USB_SERIAL_PL2303)
- FILES:=$(LINUX_DIR)/drivers/usb/serial/pl2303.$(LINUX_KMOD_SUFFIX)
+ KCONFIG:=CONFIG_USB_SERIAL_PL2303
+ FILES:=$(LINUX_DIR)/drivers/usb/serial/pl2303.ko
AUTOLOAD:=$(call AutoLoad,65,pl2303)
+ $(call AddDepends/usb-serial)
endef
+
+define KernelPackage/usb-serial-pl2303/description
+ Kernel support for Prolific PL2303 USB-to-Serial converters
+endef
+
$(eval $(call KernelPackage,usb-serial-pl2303))
+define KernelPackage/usb-serial-cp210x
+ TITLE:=Support for Silicon Labs cp210x devices
+ KCONFIG:=CONFIG_USB_SERIAL_CP210X
+ FILES:=$(LINUX_DIR)/drivers/usb/serial/cp210x.ko
+ AUTOLOAD:=$(call AutoLoad,65,cp210x)
+ $(call AddDepends/usb-serial)
+endef
+
+define KernelPackage/usb-serial-cp210x/description
+ Kernel support for Silicon Labs cp210x USB-to-Serial converters
+endef
+
+$(eval $(call KernelPackage,usb-serial-cp210x))
+
+
+define KernelPackage/usb-serial-ark3116
+ TITLE:=Support for ArkMicroChips ARK3116 devices
+ KCONFIG:=CONFIG_USB_SERIAL_ARK3116
+ FILES:=$(LINUX_DIR)/drivers/usb/serial/ark3116.ko
+ AUTOLOAD:=$(call AutoLoad,65,ark3116)
+ $(call AddDepends/usb-serial)
+endef
+
+define KernelPackage/usb-serial-ark3116/description
+ Kernel support for ArkMicroChips ARK3116 USB-to-Serial converters
+endef
+
+$(eval $(call KernelPackage,usb-serial-ark3116))
+
+
+define KernelPackage/usb-serial-oti6858
+ TITLE:=Support for Ours Technology OTI6858 devices
+ KCONFIG:=CONFIG_USB_SERIAL_OTI6858
+ FILES:=$(LINUX_DIR)/drivers/usb/serial/oti6858.ko
+ AUTOLOAD:=$(call AutoLoad,65,oti6858)
+ $(call AddDepends/usb-serial)
+endef
+
+define KernelPackage/usb-serial-oti6858/description
+ Kernel support for Ours Technology OTI6858 USB-to-Serial converters
+endef
+
+$(eval $(call KernelPackage,usb-serial-oti6858))
+
+
define KernelPackage/usb-serial-sierrawireless
TITLE:=Support for Sierra Wireless devices
- DESCRIPTION:=Kernel support for Sierra Wireless devices
- DEPENDS:=kmod-usb-serial
- SUBMENU:=$(USBMENU)
- KCONFIG:=$(CONFIG_USB_SERIAL_SIERRAWIRELESS)
- FILES:=$(LINUX_DIR)/drivers/usb/serial/sierra.$(LINUX_KMOD_SUFFIX)
+ KCONFIG:=CONFIG_USB_SERIAL_SIERRAWIRELESS
+ FILES:=$(LINUX_DIR)/drivers/usb/serial/sierra.ko
AUTOLOAD:=$(call AutoLoad,65,sierra)
+ $(call AddDepends/usb-serial)
endef
+
+define KernelPackage/usb-serial-sierrawireless/description
+ Kernel support for Sierra Wireless devices
+endef
+
$(eval $(call KernelPackage,usb-serial-sierrawireless))
+define KernelPackage/usb-serial-motorola-phone
+ TITLE:=Support for Motorola usb phone
+ KCONFIG:=CONFIG_USB_SERIAL_MOTOROLA
+ FILES:=$(LINUX_DIR)/drivers/usb/serial/moto_modem.ko
+ AUTOLOAD:=$(call AutoLoad,65,moto_modem)
+ $(call AddDepends/usb-serial)
+endef
+
+define KernelPackage/usb-serial-motorola-phone/description
+ Kernel support for Motorola usb phone
+endef
+
+$(eval $(call KernelPackage,usb-serial-motorola-phone))
+
+
define KernelPackage/usb-serial-visor
TITLE:=Support for Handspring Visor devices
- DESCRIPTION:=Kernel support for Handspring Visor PDAs
- DEPENDS:=kmod-usb-serial
- SUBMENU:=$(USBMENU)
- KCONFIG:=$(CONFIG_USB_SERIAL_VISOR)
- FILES:=$(LINUX_DIR)/drivers/usb/serial/visor.$(LINUX_KMOD_SUFFIX)
+ KCONFIG:=CONFIG_USB_SERIAL_VISOR
+ FILES:=$(LINUX_DIR)/drivers/usb/serial/visor.ko
AUTOLOAD:=$(call AutoLoad,65,visor)
+ $(call AddDepends/usb-serial)
+endef
+
+define KernelPackage/usb-serial-visor/description
+ Kernel support for Handspring Visor PDAs
endef
+
$(eval $(call KernelPackage,usb-serial-visor))
+define KernelPackage/usb-serial-cypress-m8
+ TITLE:=Support for CypressM8 USB-Serial
+ KCONFIG:=CONFIG_USB_SERIAL_CYPRESS_M8
+ FILES:=$(LINUX_DIR)/drivers/usb/serial/cypress_m8.ko
+ AUTOLOAD:=$(call AutoLoad,65,cypress_m8)
+ $(call AddDepends/usb-serial)
+endef
+
+define KernelPackage/usb-serial-cypress-m8/description
+ Kernel support for devices with Cypress M8 USB to Serial chip
+ (for example, the Delorme Earthmate LT-20 GPS)
+ Supported microcontrollers in the CY4601 family are:
+ CY7C63741 CY7C63742 CY7C63743 CY7C64013
+endef
+
+$(eval $(call KernelPackage,usb-serial-cypress-m8))
+
+
+define KernelPackage/usb-serial-keyspan
+ TITLE:=Support for Keyspan USB-to-Serial devices
+ KCONFIG:= \
+ CONFIG_USB_SERIAL_KEYSPAN \
+ CONFIG_USB_SERIAL_KEYSPAN_USA28 \
+ CONFIG_USB_SERIAL_KEYSPAN_USA28X \
+ CONFIG_USB_SERIAL_KEYSPAN_USA28XA \
+ CONFIG_USB_SERIAL_KEYSPAN_USA28XB \
+ CONFIG_USB_SERIAL_KEYSPAN_USA19 \
+ CONFIG_USB_SERIAL_KEYSPAN_USA18X \
+ CONFIG_USB_SERIAL_KEYSPAN_USA19W \
+ CONFIG_USB_SERIAL_KEYSPAN_USA19QW \
+ CONFIG_USB_SERIAL_KEYSPAN_USA19QI \
+ CONFIG_USB_SERIAL_KEYSPAN_MPR \
+ CONFIG_USB_SERIAL_KEYSPAN_USA49W \
+ CONFIG_USB_SERIAL_KEYSPAN_USA49WLC
+ FILES:=$(LINUX_DIR)/drivers/usb/serial/keyspan.ko
+ AUTOLOAD:=$(call AutoLoad,65,keyspan)
+ $(call AddDepends/usb-serial)
+endef
+
+define KernelPackage/usb-serial-keyspan/description
+ Kernel support for Keyspan USB-to-Serial devices
+endef
+
+$(eval $(call KernelPackage,usb-serial-keyspan))
+
+
+define KernelPackage/usb-serial-option
+ TITLE:=Support for Option HSDPA modems
+ KCONFIG:=CONFIG_USB_SERIAL_OPTION
+ FILES:=$(LINUX_DIR)/drivers/usb/serial/option.ko
+ AUTOLOAD:=$(call AutoLoad,65,option)
+ $(call AddDepends/usb-serial)
+endef
+
+define KernelPackage/usb-serial-option/description
+ Kernel support for Option HSDPA modems
+endef
+
+$(eval $(call KernelPackage,usb-serial-option))
+
+
define KernelPackage/usb-storage
- $(call usbdep,)
TITLE:=USB Storage support
- DESCRIPTION:=Kernel support for USB Mass Storage devices
- KCONFIG:=$(CONFIG_USB_STORAGE)
- FILES:= \
- $(LINUX_DIR)/drivers/usb/storage/usb-storage.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,60,scsi_mod sd_mod usb-storage)
- DEPENDS:=+kmod-scsi-core
+ DEPENDS:= +!TARGET_x86:kmod-scsi-core
+ KCONFIG:=CONFIG_USB_STORAGE
+ FILES:=$(LINUX_DIR)/drivers/usb/storage/usb-storage.ko
+ AUTOLOAD:=$(call AutoLoad,60,usb-storage,1)
+ $(call AddDepends/usb)
endef
-$(eval $(call KernelPackage,usb-storage))
+define KernelPackage/usb-storage/description
+ Kernel support for USB Mass Storage devices
+endef
+
+$(eval $(call KernelPackage,usb-storage))
-define KernelPackage/usb-speedtouch
- $(call usbdep,@LINUX_2_6 kmod-atm)
- TITLE:=Support for SpeedTouch ADSL modems
- DESCRIPTION:=Kernel support for SpeedTouch USB ADSL modems
- KCONFIG:=$(CONFIG_USB_SPEEDTOUCH)
+define KernelPackage/usb-storage-extras
+ SUBMENU:=$(USB_MENU)
+ TITLE:=Extra drivers for usb-storage
+ DEPENDS:=+kmod-usb-storage
+ KCONFIG:= \
+ CONFIG_USB_STORAGE_ALAUDA \
+ CONFIG_USB_STORAGE_CYPRESS_ATACB \
+ CONFIG_USB_STORAGE_DATAFAB \
+ CONFIG_USB_STORAGE_FREECOM \
+ CONFIG_USB_STORAGE_ISD200 \
+ CONFIG_USB_STORAGE_JUMPSHOT \
+ CONFIG_USB_STORAGE_KARMA \
+ CONFIG_USB_STORAGE_SDDR09 \
+ CONFIG_USB_STORAGE_SDDR55 \
+ CONFIG_USB_STORAGE_USBAT
FILES:= \
- $(LINUX_DIR)/drivers/usb/atm/usbatm.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/usb/atm/speedtch.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,70,usbatm speedtch)
+ $(LINUX_DIR)/drivers/usb/storage/ums-alauda.ko \
+ $(LINUX_DIR)/drivers/usb/storage/ums-cypress.ko \
+ $(LINUX_DIR)/drivers/usb/storage/ums-datafab.ko \
+ $(LINUX_DIR)/drivers/usb/storage/ums-freecom.ko \
+ $(LINUX_DIR)/drivers/usb/storage/ums-isd200.ko \
+ $(LINUX_DIR)/drivers/usb/storage/ums-jumpshot.ko \
+ $(LINUX_DIR)/drivers/usb/storage/ums-karma.ko \
+ $(LINUX_DIR)/drivers/usb/storage/ums-sddr09.ko \
+ $(LINUX_DIR)/drivers/usb/storage/ums-sddr55.ko \
+ $(LINUX_DIR)/drivers/usb/storage/ums-usbat.ko
+ AUTOLOAD:=$(call AutoLoad,60,ums-alauda ums-cypress ums-datafab \
+ ums-freecom ums-isd200 ums-jumpshot \
+ ums-karma ums-sddr09 ums-sddr55 ums-usbat)
+endef
+
+define KernelPackage/usb-storage-extras/description
+ Say Y here if you want to have some more drivers,
+ such as for SmartMedia card readers.
+endef
+
+$(eval $(call KernelPackage,usb-storage-extras))
+
+
+define KernelPackage/usb-video
+ TITLE:=Support for USB video devices
+ KCONFIG:=CONFIG_VIDEO_USBVIDEO
+ FILES:=$(LINUX_DIR)/drivers/media/video/usbvideo/usbvideo.ko
+ AUTOLOAD:=$(call AutoLoad,61,usbvideo)
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-video/description
+ Kernel support for USB video devices
+endef
+
+$(eval $(call KernelPackage,usb-video))
+
+
+define KernelPackage/usb-atm
+ TITLE:=Support for ATM on USB bus
+ DEPENDS:=+kmod-atm
+ KCONFIG:=CONFIG_USB_ATM
+ FILES:=$(LINUX_DIR)/drivers/usb/atm/usbatm.ko
+ AUTOLOAD:=$(call AutoLoad,60,usbatm)
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-atm/description
+ Kernel support for USB DSL modems
+endef
+
+$(eval $(call KernelPackage,usb-atm))
+
+
+define AddDepends/usb-atm
+ SUBMENU:=$(USB_MENU)
+ DEPENDS+=kmod-usb-atm $(1)
endef
-$(eval $(call KernelPackage,usb-speedtouch))
-define KernelPackage/usb-pwc
- $(call usbdep,+kmod-videodev)
- TITLE:=Philips WebCam driver
- DESCRIPTION:=Kernel modules for supporting Philips WebCam USB devices
- KCONFIG:=$(CONFIG_USB_PWC)
- AUTOLOAD:=$(call AutoLoad,70,pwc)
+define KernelPackage/usb-atm-speedtouch
+ TITLE:=SpeedTouch USB ADSL modems support
+ KCONFIG:=CONFIG_USB_SPEEDTOUCH
+ FILES:=$(LINUX_DIR)/drivers/usb/atm/speedtch.ko
+ AUTOLOAD:=$(call AutoLoad,70,speedtch)
+ $(call AddDepends/usb-atm)
endef
-define KernelPackage/usb-pwc/2.4
- FILES:=$(LINUX_DIR)/drivers/usb/pwc.$(LINUX_KMOD_SUFFIX)
+define KernelPackage/usb-atm-speedtouch/description
+ Kernel support for SpeedTouch USB ADSL modems
endef
-$(eval $(call KernelPackage,usb-pwc))
+$(eval $(call KernelPackage,usb-atm-speedtouch))
+
+
+define KernelPackage/usb-atm-ueagle
+ TITLE:=Eagle 8051 based USB ADSL modems support
+ FILES:=$(LINUX_DIR)/drivers/usb/atm/ueagle-atm.ko
+ KCONFIG:=CONFIG_USB_UEAGLEATM
+ AUTOLOAD:=$(call AutoLoad,70,ueagle-atm)
+ $(call AddDepends/usb-atm)
+endef
+
+define KernelPackage/usb-atm-ueagle/description
+ Kernel support for Eagle 8051 based USB ADSL modems
+endef
+
+$(eval $(call KernelPackage,usb-atm-ueagle))
+
+
+define KernelPackage/usb-atm-cxacru
+ TITLE:=cxacru
+ FILES:=$(LINUX_DIR)/drivers/usb/atm/cxacru.ko
+ KCONFIG:=CONFIG_USB_CXACRU
+ AUTOLOAD:=$(call AutoLoad,70,cxacru)
+ $(call AddDepends/usb-atm)
+endef
+
+define KernelPackage/usb-atm-cxacru/description
+ Kernel support for cxacru based USB ADSL modems
+endef
+
+$(eval $(call KernelPackage,usb-atm-cxacru))
+
define KernelPackage/usb-net
- $(call usbdep,)
TITLE:=Kernel modules for USB-to-Ethernet convertors
- DESCRIPTION:=Kernel modules for USB-to-Ethernet convertors
- KCONFIG:=$(CONFIG_USB_USBNET)
- DEPENDS:=@USB_SUPPORT
- AUTOLOAD:=$(call Autoload,60, usbnet)
+ KCONFIG:=CONFIG_USB_USBNET
+ AUTOLOAD:=$(call AutoLoad,60,usbnet)
+ FILES:=$(LINUX_DIR)/drivers/$(USBNET_DIR)/usbnet.ko
+ $(call AddDepends/usb)
endef
-define KernelPackage/usb-net/2.4
- FILES:=$(LINUX_DIR)/drivers/usb/usbnet.$(LINUX_KMOD_SUFFIX)
+define KernelPackage/usb-net/description
+ Kernel modules for USB-to-Ethernet convertors
endef
-define KernelPackage/usb-net/2.6
- FILES:=$(LINUX_DIR)/drivers/usb/net/usbnet.$(LINUX_KMOD_SUFFIX)
+$(eval $(call KernelPackage,usb-net))
+
+
+define AddDepends/usb-net
+ SUBMENU:=$(USB_MENU)
+ DEPENDS+=kmod-usb-net $(1)
endef
-$(eval $(call KernelPackage,usb-net))
define KernelPackage/usb-net-asix
- $(call usbdep,+kmod-usbnet)
TITLE:=Kernel module for USB-to-Ethernet Asix convertors
- DESCRIPTION:=Kernel module for USB-to-Ethernet Asix convertors
- DEPENDS:=kmod-usb-net
- KCONFIG:=$(CONFIG_USB_NET_AX8817X)
+ KCONFIG:=CONFIG_USB_NET_AX8817X
+ FILES:=$(LINUX_DIR)/drivers/$(USBNET_DIR)/asix.ko
+ AUTOLOAD:=$(call AutoLoad,61,asix)
+ $(call AddDepends/usb-net)
endef
-define KernelPackage/usb-net-asix/2.4
- FILES:=$(LINUX_DIR)/drivers/usb/ax8817x.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call Autoload,61,ax8817x)
+define KernelPackage/usb-net-asix/description
+ Kernel module for USB-to-Ethernet Asix convertors
+endef
+
+$(eval $(call KernelPackage,usb-net-asix))
+
+
+define KernelPackage/usb-net-hso
+ TITLE:=Kernel module for Option USB High Speed Mobile Devices
+ KCONFIG:=CONFIG_USB_HSO
+ FILES:= \
+ $(LINUX_DIR)/drivers/$(USBNET_DIR)/hso.ko
+ AUTOLOAD:=$(call AutoLoad,61,hso)
+ $(call AddDepends/usb-net)
+ $(call AddDepends/rfkill)
endef
-define KernelPackage/usb-net-asix/2.6
- FILES:=$(LINUX_DIR)/drivers/usb/net/asix.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call Autoload,61,asix)
+define KernelPackage/usb-net-hso/description
+ Kernel module for Option USB High Speed Mobile Devices
endef
-$(eval $(call KernelPackage,usb-net-asix))
+$(eval $(call KernelPackage,usb-net-hso))
+
+
+define KernelPackage/usb-net-kaweth
+ TITLE:=Kernel module for USB-to-Ethernet Kaweth convertors
+ KCONFIG:=CONFIG_USB_KAWETH
+ FILES:=$(LINUX_DIR)/drivers/$(USBNET_DIR)/kaweth.ko
+ AUTOLOAD:=$(call AutoLoad,61,kaweth)
+ $(call AddDepends/usb-net)
+endef
+
+define KernelPackage/usb-net-kaweth/description
+ Kernel module for USB-to-Ethernet Kaweth convertors
+endef
+
+$(eval $(call KernelPackage,usb-net-kaweth))
+
+
+define KernelPackage/usb-net-pegasus
+ TITLE:=Kernel module for USB-to-Ethernet Pegasus convertors
+ KCONFIG:=CONFIG_USB_PEGASUS
+ FILES:=$(LINUX_DIR)/drivers/$(USBNET_DIR)/pegasus.ko
+ AUTOLOAD:=$(call AutoLoad,61,pegasus)
+ $(call AddDepends/usb-net)
+endef
+
+define KernelPackage/usb-net-pegasus/description
+ Kernel module for USB-to-Ethernet Pegasus convertors
+endef
+
+$(eval $(call KernelPackage,usb-net-pegasus))
+
+
+define KernelPackage/usb-net-mcs7830
+ TITLE:=Kernel module for USB-to-Ethernet MCS7830 convertors
+ KCONFIG:=CONFIG_USB_NET_MCS7830
+ FILES:=$(LINUX_DIR)/drivers/$(USBNET_DIR)/mcs7830.ko
+ AUTOLOAD:=$(call AutoLoad,61,mcs7830)
+ $(call AddDepends/usb-net)
+endef
+
+define KernelPackage/usb-net-mcs7830/description
+ Kernel module for USB-to-Ethernet MCS7830 convertors
+endef
+
+$(eval $(call KernelPackage,usb-net-mcs7830))
+
+
+define KernelPackage/usb-net-dm9601-ether
+ TITLE:=Support for DM9601 ethernet connections
+ KCONFIG:=CONFIG_USB_NET_DM9601
+ FILES:=$(LINUX_DIR)/drivers/$(USBNET_DIR)/dm9601.ko
+ AUTOLOAD:=$(call AutoLoad,61,dm9601)
+ $(call AddDepends/usb-net)
+endef
+
+define KernelPackage/usb-net-dm9601-ether/description
+ Kernel support for USB DM9601 devices
+endef
+
+$(eval $(call KernelPackage,usb-net-dm9601-ether))
+
+define KernelPackage/usb-net-cdc-ether
+ TITLE:=Support for cdc ethernet connections
+ KCONFIG:=CONFIG_USB_NET_CDCETHER
+ FILES:=$(LINUX_DIR)/drivers/$(USBNET_DIR)/cdc_ether.ko
+ AUTOLOAD:=$(call AutoLoad,61,cdc_ether)
+ $(call AddDepends/usb-net)
+endef
+
+define KernelPackage/usb-net-cdc-ether/description
+ Kernel support for USB CDC Ethernet devices
+endef
+
+$(eval $(call KernelPackage,usb-net-cdc-ether))
+
+
+define KernelPackage/usb-net-rndis
+ TITLE:=Support for RNDIS connections
+ KCONFIG:=CONFIG_USB_NET_RNDIS_HOST
+ FILES:= $(LINUX_DIR)/drivers/$(USBNET_DIR)/rndis_host.ko
+ AUTOLOAD:=$(call AutoLoad,62,rndis_host)
+ $(call AddDepends/usb-net,+kmod-usb-net-cdc-ether)
+endef
+
+define KernelPackage/usb-net-rndis/description
+ Kernel support for RNDIS connections
+endef
+
+$(eval $(call KernelPackage,usb-net-rndis))
+
define KernelPackage/usb-hid
- $(call usbdep,@LINUX_2_6)
TITLE:=Support for USB Human Input Devices
- DESCRIPTION:=Kernel support for USB HID devices such as keyboards and mice
- KCONFIG:=$(CONFIG_USB_HID)
- AUTOLOAD:=$(call AutoLoad,70,usbhid evdev)
+ KCONFIG:=CONFIG_HID_SUPPORT=y CONFIG_USB_HID
+ FILES:=$(LINUX_DIR)/drivers/$(USBHID_DIR)/usbhid.ko
+ AUTOLOAD:=$(call AutoLoad,70,usbhid)
+ $(call AddDepends/usb)
+ $(call AddDepends/hid)
+ $(call AddDepends/input,+kmod-input-evdev)
endef
-define KernelPackage/usb-hid/2.6
- FILES:= \
- $(LINUX_DIR)/drivers/usb/input/usbhid.ko \
- $(LINUX_DIR)/drivers/input/evdev.ko
+
+define KernelPackage/usb-hid/description
+ Kernel support for USB HID devices such as keyboards and mice
endef
+
$(eval $(call KernelPackage,usb-hid))
+
define KernelPackage/usb-yealink
- $(call usbdep,@LINUX_2_6)
TITLE:=USB Yealink VOIP phone
- DESCRIPTION:=Kernel support for Yealink VOIP phone
- KCONFIG:=$(CONFIG_USB_YEALINK)
- FILES:=$(LINUX_DIR)/drivers/usb/input/yealink.ko
+ KCONFIG:=CONFIG_USB_YEALINK CONFIG_INPUT_YEALINK CONFIG_INPUT=m CONFIG_INPUT_MISC=y
+ FILES:=$(LINUX_DIR)/drivers/$(USBINPUT_DIR)/yealink.ko
AUTOLOAD:=$(call AutoLoad,70,yealink)
- DEPENDS:=kmod-input-core kmod-input-evdev
+ $(call AddDepends/usb)
+ $(call AddDepends/input,+kmod-input-evdev)
+endef
+
+define KernelPackage/usb-yealink/description
+ Kernel support for Yealink VOIP phone
endef
+
$(eval $(call KernelPackage,usb-yealink))
+define KernelPackage/usb-cm109
+ TITLE:=Support for CM109 device
+ KCONFIG:=CONFIG_USB_CM109 CONFIG_INPUT_CM109 CONFIG_INPUT=m CONFIG_INPUT_MISC=y
+ FILES:=$(LINUX_DIR)/drivers/$(USBINPUT_DIR)/cm109.ko
+ AUTOLOAD:=$(call AutoLoad,70,cm109)
+ $(call AddDepends/usb)
+ $(call AddDepends/input,+kmod-input-evdev)
+endef
+
+define KernelPackage/usb-cm109/description
+ Kernel support for CM109 VOIP phone
+endef
+
+$(eval $(call KernelPackage,usb-cm109))
+
+
+define KernelPackage/usb-test
+ TITLE:=USB Testing Driver
+ DEPENDS:=@DEVEL
+ KCONFIG:=CONFIG_USB_TEST
+ FILES:=$(LINUX_DIR)/drivers/usb/misc/usbtest.ko
+ $(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-test/description
+ Kernel support for testing USB Host Controller software.
+endef
+
+$(eval $(call KernelPackage,usb-test))
+
+
+define KernelPackage/usb-phidget
+ TITLE:=USB Phidget Driver
+ KCONFIG:=CONFIG_USB_PHIDGET CONFIG_USB_PHIDGETKIT CONFIG_USB_PHIDGETMOTORCONTROL CONFIG_USB_PHIDGETSERVO
+ FILES:=$(LINUX_DIR)/drivers/usb/misc/phidget*.ko
+$(call AddDepends/usb)
+endef
+
+define KernelPackage/usb-phidget/description
+ Kernel support for USB Phidget devices.
+endef
+
+$(eval $(call KernelPackage,usb-phidget))
+
projects / openwrt.git / blobdiff