[rb532] remove 2.6.27 we did not use it and went to 2.6.28 directly
[openwrt.git] / target / linux / rb532 / patches-2.6.27 / 012-korina_do_tx_at_right_position.patch
diff --git a/target/linux/rb532/patches-2.6.27/012-korina_do_tx_at_right_position.patch b/target/linux/rb532/patches-2.6.27/012-korina_do_tx_at_right_position.patch
deleted file mode 100644 (file)
index 101e869..0000000
+++ /dev/null
@@ -1,40 +0,0 @@
-Triggering TX before the write to the DMA status mask register leads to
-transferring packets with maximum payload no matter what the actual
-packet size is.
-While here, also trigger RX scheduling after writing the DMA status mask
-register, like it was in the original driver before it was sent
-upstream.
-
-Signed-off-by: Phil Sutter <n0-1@freewrt.org>
----
---- a/drivers/net/korina.c     2009-01-19 23:27:41.000000000 +0100
-+++ b/drivers/net/korina.c     2009-01-19 23:29:08.000000000 +0100
-@@ -330,12 +330,12 @@
-       dmas = readl(&lp->rx_dma_regs->dmas);
-       if (dmas & (DMA_STAT_DONE | DMA_STAT_HALT | DMA_STAT_ERR)) {
--              netif_rx_schedule(dev, &lp->napi);
--
-               dmasm = readl(&lp->rx_dma_regs->dmasm);
-               writel(dmasm | (DMA_STAT_DONE |
-                               DMA_STAT_HALT | DMA_STAT_ERR),
-                               &lp->rx_dma_regs->dmasm);
-+              
-+              netif_rx_schedule(dev, &lp->napi);
-               if (dmas & DMA_STAT_ERR)
-                       printk(KERN_ERR DRV_NAME "%s: DMA error\n", dev->name);
-@@ -621,11 +621,11 @@
-       dmas = readl(&lp->tx_dma_regs->dmas);
-       if (dmas & (DMA_STAT_FINI | DMA_STAT_ERR)) {
--              korina_tx(dev);
--
-               dmasm = readl(&lp->tx_dma_regs->dmasm);
-               writel(dmasm | (DMA_STAT_FINI | DMA_STAT_ERR),
-                               &lp->tx_dma_regs->dmasm);
-+              
-+              korina_tx(dev);
-               if (lp->tx_chain_status == desc_filled &&
-                       (readl(&(lp->tx_dma_regs->dmandptr)) == 0)) {
This page took 0.024461 seconds and 4 git commands to generate.