ar71xx: change firmware image name for th TP-Link boards

[openwrt.git] / target / linux / atheros / base-files / etc / uci-defaults / network

diff --git a/target/linux/atheros/base-files/etc/uci-defaults/network b/target/linux/atheros/base-files/etc/uci-defaults/network
index 61a790f..49c2a40 100644 (file)
--- a/target/linux/atheros/base-files/etc/uci-defaults/network
+++ b/target/linux/atheros/base-files/etc/uci-defaults/network
@@ -1,11 +1,41 @@
 #!/bin/sh
-if [ -e "/sys/bus/mdio_bus/drivers/Infineon ADM6996/0:00" -o \
-     -e "/sys/bus/mdio_bus/drivers/Marvell 88E6060/0:1f" ]; then
+if [ -e "/sys/bus/mdio_bus/drivers/IC+ IP175C/0:00" -a -x /sbin/swconfig ]; then
        uci batch <<EOF
-set network.lan.ifname=eth0.0
+set network.eth0=switch
+set network.eth0.reset=1
+set network.eth0.enable_vlan=1
+set network.eth0_1=switch_vlan
+set network.eth0_1.device=eth0
+set network.eth0_1.vlan=1
+set network.eth0_1.ports="0 1 2 3 5t"
+set network.eth0_2=switch_vlan
+set network.eth0_2.device=eth0
+set network.eth0_2.vlan=2
+set network.eth0_2.ports="4 5t"
+EOF
+       HAS_SWITCH=1
+fi
+
+if [ -n "$HAS_SWITCH" -o \
+       -e "/sys/bus/mdio_bus/drivers/Infineon ADM6996/0:00" -o \
+       -e "/sys/bus/mdio_bus/drivers/Marvell 88E6060/0:10" ]; then
+       uci batch <<EOF
+set network.lan.ifname=eth0.1
 set network.wan=interface
-set network.wan.ifname=eth0.1
+set network.wan.ifname=eth0.2
 set network.wan.proto=dhcp
 commit network
 EOF
+       HAS_SWITCH=1
 fi
+
+[ -z "$HAS_SWITCH" -a -d /sys/class/net/eth1 ] && {
+       uci batch <<EOF
+set network.wan=interface
+set network.wan.ifname=eth1
+set network.wan.proto=dhcp
+commit network
+EOF
+}
+
+uci commit network