ar71xx: add initial support for the TL-WR741ND v4 board

[openwrt.git] / target / linux / ar71xx / files / arch / mips / ar71xx / mach-ap83.c

diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-ap83.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-ap83.c
index 964fac5..bcd2fae 100644 (file)
--- a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-ap83.c
+++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-ap83.c
@@ -38,7 +38,8 @@
 #define AP83_050_GPIO_VSC7385_MOSI     16
 #define AP83_050_GPIO_VSC7385_SCK      17
 
-#define AP83_BUTTONS_POLL_INTERVAL     20
+#define AP83_KEYS_POLL_INTERVAL                20      /* msecs */
+#define AP83_KEYS_DEBOUNCE_INTERVAL    (3 * AP83_KEYS_POLL_INTERVAL)
 
 #ifdef CONFIG_MTD_PARTITIONS
 static struct mtd_partition ap83_flash_partitions[] = {
@@ -115,19 +116,19 @@ static struct gpio_led ap83_leds_gpio[] __initdata = {
        },
 };
 
-static struct gpio_button ap83_gpio_buttons[] __initdata = {
+static struct gpio_keys_button ap83_gpio_keys[] __initdata = {
        {
                .desc           = "soft_reset",
                .type           = EV_KEY,
                .code           = KEY_RESTART,
-               .threshold      = 3,
+               .debounce_interval = AP83_KEYS_DEBOUNCE_INTERVAL,
                .gpio           = AP83_GPIO_BTN_RESET,
                .active_low     = 1,
        }, {
                .desc           = "jumpstart",
                .type           = EV_KEY,
                .code           = KEY_WPS_BUTTON,
-               .threshold      = 3,
+               .debounce_interval = AP83_KEYS_DEBOUNCE_INTERVAL,
                .gpio           = AP83_GPIO_BTN_JUMPSTART,
                .active_low     = 1,
        }
@@ -216,9 +217,9 @@ static void __init ap83_generic_setup(void)
        ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ap83_leds_gpio),
                                        ap83_leds_gpio);
 
-       ar71xx_add_device_gpio_buttons(-1, AP83_BUTTONS_POLL_INTERVAL,
-                                       ARRAY_SIZE(ap83_gpio_buttons),
-                                       ap83_gpio_buttons);
+       ar71xx_register_gpio_keys_polled(-1, AP83_KEYS_POLL_INTERVAL,
+                                        ARRAY_SIZE(ap83_gpio_keys),
+                                        ap83_gpio_keys);
 
        ar71xx_add_device_usb();