enable use of 8M flash (closes: #2232)

[openwrt.git] / target / linux / ar7-2.6 / files / arch / mips / ar7 / platform.c

diff --git a/target/linux/ar7-2.6/files/arch/mips/ar7/platform.c b/target/linux/ar7-2.6/files/arch/mips/ar7/platform.c
index b9f7d0e..cae35bc 100644 (file)
--- a/target/linux/ar7-2.6/files/arch/mips/ar7/platform.c
+++ b/target/linux/ar7-2.6/files/arch/mips/ar7/platform.c
@@ -90,7 +90,7 @@ static struct resource physmap_flash_resource = {
        .name = "mem",
        .flags = IORESOURCE_MEM,
        .start = 0x10000000,
-       .end = 0x103fffff,
+       .end = 0x107fffff,
 };     
 
 static struct resource cpmac_low_res[] = {
@@ -252,30 +252,40 @@ static struct platform_device vlynq_high = {
  * as xscale and, obviously, don't work...
  */
 #if !defined(CONFIG_SERIAL_8250)
+
+static struct plat_serial8250_port uart0_data =
+{
+       .mapbase = AR7_REGS_UART0,
+       .irq = AR7_IRQ_UART0,
+       .regshift = 2,
+       .iotype = UPIO_MEM,
+       .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
+};
+
+static struct plat_serial8250_port uart1_data =
+{
+       .mapbase = UR8_REGS_UART1,
+       .irq = AR7_IRQ_UART1,
+       .regshift = 2,
+       .iotype = UPIO_MEM,
+       .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
+};
+
 static struct plat_serial8250_port uart_data[] = {
-       {
-               .mapbase = AR7_REGS_UART0,
-               .irq = AR7_IRQ_UART0,
-               .regshift = 2,
-               .iotype = UPIO_MEM,
-               .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
-       },
-       {
-               .mapbase = AR7_REGS_UART1,
-               .irq = AR7_IRQ_UART1,
-               .regshift = 2,
-               .iotype = UPIO_MEM,
-               .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
-       },
-       {
-               .flags = 0,
-       },
+    uart0_data,
+    uart1_data,
+       { .flags = 0 }
+};
+
+static struct plat_serial8250_port uart_data_single[] = {
+    uart0_data,
+       { .flags = 0 }
 };
 
 static struct platform_device uart = {
        .id = 0,
        .name = "serial8250",
-       .dev.platform_data = uart_data,
+       .dev.platform_data = uart_data_single
 };
 #endif
 
@@ -317,7 +327,8 @@ static int __init ar7_register_devices(void)
 {
        int res;
 
-#if defined(CONFIG_SERIAL_8250)
+#ifdef CONFIG_SERIAL_8250
+
        static struct uart_port uart_port[2];
 
        memset(uart_port, 0, sizeof(struct uart_port) * 2);
@@ -334,24 +345,38 @@ static int __init ar7_register_devices(void)
        if (res)
                return res;
 
-       uart_port[1].type = PORT_AR7;
-       uart_port[1].line = 1;
-       uart_port[1].irq = AR7_IRQ_UART1;
-       uart_port[1].uartclk = ar7_bus_freq() / 2;
-       uart_port[1].iotype = UPIO_MEM;
-       uart_port[1].mapbase = AR7_REGS_UART1;
-       uart_port[1].membase = ioremap(uart_port[1].mapbase, 256);
-       uart_port[1].regshift = 2;
-       res = early_serial_setup(&uart_port[1]);
-       if (res)
-               return res;
-#else
+
+    // Only TNETD73xx have a second serial port
+    if (ar7_has_second_uart()) {
+       uart_port[1].type = PORT_AR7;
+       uart_port[1].line = 1;
+       uart_port[1].irq = AR7_IRQ_UART1;
+       uart_port[1].uartclk = ar7_bus_freq() / 2;
+       uart_port[1].iotype = UPIO_MEM;
+       uart_port[1].mapbase = UR8_REGS_UART1;
+       uart_port[1].membase = ioremap(uart_port[1].mapbase, 256);
+       uart_port[1].regshift = 2;
+       res = early_serial_setup(&uart_port[1]);
+       if (res)
+               return res;
+    }
+    
+#else // !CONFIG_SERIAL_8250
+
        uart_data[0].uartclk = ar7_bus_freq() / 2;
        uart_data[1].uartclk = uart_data[0].uartclk;
+
+    // Only TNETD73xx have a second serial port
+    if (ar7_has_second_uart()) {
+        uart.dev.platform_data = uart_data;
+    }
+
        res = platform_device_register(&uart);
        if (res)
                return res;
-#endif
+        
+#endif // CONFIG_SERIAL_8250
+
        res = platform_device_register(&physmap_flash);
        if (res)
                return res;