kernel: change debounce logic in the gpio-buttons driver

[openwrt.git] / package / mac80211 / Config.in

diff --git a/package/mac80211/Config.in b/package/mac80211/Config.in
index d3e015a..35f01c8 100644 (file)
--- a/package/mac80211/Config.in
+++ b/package/mac80211/Config.in
@@ -1,81 +1,10 @@
 # mac80211 configuration
 
-choice
-       prompt "b43 firmware version"
-       depends on PACKAGE_kmod-b43
-       default B43_STABLE
-       help
-         This option allows you to select the version of the b43 firmware.
-
-config B43_STABLE
-       bool "4.150.10.5 (stable)"
-       help
-         Stable firmware for BCM43xx devices.
-
-         If unsure, select this.
-
-config B43_EXPERIMENTAL
-       bool "4.178.10.4 (experimental)"
-       help
-         Experimental firmware for BCM43xx devices.
-
-         This firmware is not tested as much as the "stable" firmware.
-
-         If unsure, select the "stable" firmware.
-
-config B43_OPENFIRMWARE
-       bool "Open FirmWare for WiFi networks"
-       help
-         Opensource firmware for BCM43xx devices.
-
-         Do _not_ select this, unless you know what you are doing.
-         The Opensource firmware is not suitable for embedded devices, yet.
-         It does not support QoS, which is bad for AccessPoints.
-         It does not support hardware crypto acceleration, which is a showstopper
-         for embedded devices with low CPU resources.
-
-         If unsure, select the "stable" firmware.
-
-endchoice
-
-config B43_FW_SQUASH
-       bool "Remove unnecessary firmware files"
-       depends on PACKAGE_kmod-b43 && !B43_OPENFIRMWARE
-       help
-         This options allows you to remove unnecessary b43 firmware files
-         from the final rootfs image. This can reduce the rootfs size by
-         up to 200k.
-
-         Do _NOT_ use this option, if you don't know the core revision
-         and/or PHY type of your wireless chip.
-
-         If unsure, say N.
-
-config B43_FW_SQUASH_COREREVS
-       string "Core revisions to include"
-       depends on PACKAGE_kmod-b43 && B43_FW_SQUASH
-       default "5,6,7,8,9,10"
-       help
-         This is a comma seperated list of core revision numbers.
-         Example (keep files for rev5 only):
-                5
-         Example (keep files for rev5 and rev11):
-                5,11
-
-config B43_FW_SQUASH_PHYTYPES
-       string "PHY types to include"
-       depends on PACKAGE_kmod-b43 && B43_FW_SQUASH
-       default "G,LP,N"
-       help
-         This is a comma seperated list of PHY types:
-         A         => A-PHY
-         AG        => Dual A-PHY G-PHY
-         G         => G-PHY
-         LP        => LP-PHY
-         N         => N-PHY
-
-         Example (keep files for G-PHY only):
-                G
-         Example (keep files for G-PHY and N-PHY):
-                G,N
-
+config PACKAGE_MAC80211_DEBUGFS
+       bool "Export mac80211 internals in DebugFS"
+       depends on PACKAGE_kmod-mac80211
+       ---help---
+         Select this to see extensive information about
+         the internal state of mac80211 in debugfs.
+
+         Say N unless you know you need this.