-diff -urN linux.old/drivers/net/ar2313/ar2313.c linux.eth/drivers/net/ar2313/ar2313.c
---- linux.old/drivers/net/ar2313/ar2313.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux.eth/drivers/net/ar2313/ar2313.c 2006-12-16 04:30:44.000000000 +0100
-@@ -0,0 +1,1545 @@
-+/*
-+ * ar2313.c: Linux driver for the Atheros AR231z Ethernet device.
-+ *
-+ * Copyright (C) 2004 by Sameer Dekate <sdekate@arubanetworks.com>
-+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
-+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
-+ *
-+ * Thanks to Atheros for providing hardware and documentation
-+ * enabling me to write this driver.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * Additional credits:
-+ * This code is taken from John Taylor's Sibyte driver and then
-+ * modified for the AR2313.
-+ */
-+
-+#include <linux/autoconf.h>
-+#include <linux/module.h>
-+#include <linux/version.h>
-+#include <linux/types.h>
-+#include <linux/errno.h>
-+#include <linux/ioport.h>
-+#include <linux/pci.h>
-+#include <linux/netdevice.h>
-+#include <linux/etherdevice.h>
-+#include <linux/skbuff.h>
-+#include <linux/init.h>
-+#include <linux/delay.h>
-+#include <linux/mm.h>
-+#include <linux/highmem.h>
-+#include <linux/sockios.h>
-+#include <linux/pkt_sched.h>
-+#include <linux/compile.h>
-+#include <linux/mii.h>
-+#include <linux/ethtool.h>
-+#include <linux/ctype.h>
-+#include <linux/platform_device.h>
-+
-+#include <net/sock.h>
-+#include <net/ip.h>
-+
-+#include <asm/system.h>
-+#include <asm/io.h>
-+#include <asm/irq.h>
-+#include <asm/byteorder.h>
-+#include <asm/uaccess.h>
-+#include <asm/bootinfo.h>
-+
-+#include <ar531x_platform.h>
-+
-+#undef INDEX_DEBUG
-+#define DEBUG 0
-+#define DEBUG_TX 0
-+#define DEBUG_RX 0
-+#define DEBUG_INT 0
-+#define DEBUG_MC 0
-+#define DEBUG_ERR 1
-+
-+#ifndef min
-+#define min(a,b) (((a)<(b))?(a):(b))
-+#endif
-+
-+#ifndef SMP_CACHE_BYTES
-+#define SMP_CACHE_BYTES L1_CACHE_BYTES
-+#endif
-+
-+#ifndef SET_MODULE_OWNER
-+#define SET_MODULE_OWNER(dev) {do{} while(0);}
-+#define AR2313_MOD_INC_USE_COUNT MOD_INC_USE_COUNT
-+#define AR2313_MOD_DEC_USE_COUNT MOD_DEC_USE_COUNT
-+#else
-+#define AR2313_MOD_INC_USE_COUNT {do{} while(0);}
-+#define AR2313_MOD_DEC_USE_COUNT {do{} while(0);}
-+#endif
-+
-+#define PHYSADDR(a) ((_ACAST32_ (a)) & 0x1fffffff)
-+
-+static char ifname[5] = "bond";
-+
-+module_param_string(ifname, ifname, 5, 0);
-+
-+#define AR2313_MBOX_SET_BIT 0x8
-+
-+#define BOARD_IDX_STATIC 0
-+#define BOARD_IDX_OVERFLOW -1
-+
-+#include "ar2313_msg.h"
-+#include "platform.h"
-+#include "dma.h"
-+#include "ar2313.h"
-+
-+/*
-+ * New interrupt handler strategy:
-+ *
-+ * An old interrupt handler worked using the traditional method of
-+ * replacing an skbuff with a new one when a packet arrives. However
-+ * the rx rings do not need to contain a static number of buffer
-+ * descriptors, thus it makes sense to move the memory allocation out
-+ * of the main interrupt handler and do it in a bottom half handler
-+ * and only allocate new buffers when the number of buffers in the
-+ * ring is below a certain threshold. In order to avoid starving the
-+ * NIC under heavy load it is however necessary to force allocation
-+ * when hitting a minimum threshold. The strategy for alloction is as
-+ * follows:
-+ *
-+ * RX_LOW_BUF_THRES - allocate buffers in the bottom half
-+ * RX_PANIC_LOW_THRES - we are very low on buffers, allocate
-+ * the buffers in the interrupt handler
-+ * RX_RING_THRES - maximum number of buffers in the rx ring
-+ *
-+ * One advantagous side effect of this allocation approach is that the
-+ * entire rx processing can be done without holding any spin lock
-+ * since the rx rings and registers are totally independent of the tx
-+ * ring and its registers. This of course includes the kmalloc's of
-+ * new skb's. Thus start_xmit can run in parallel with rx processing
-+ * and the memory allocation on SMP systems.
-+ *
-+ * Note that running the skb reallocation in a bottom half opens up
-+ * another can of races which needs to be handled properly. In
-+ * particular it can happen that the interrupt handler tries to run
-+ * the reallocation while the bottom half is either running on another
-+ * CPU or was interrupted on the same CPU. To get around this the
-+ * driver uses bitops to prevent the reallocation routines from being
-+ * reentered.
-+ *
-+ * TX handling can also be done without holding any spin lock, wheee
-+ * this is fun! since tx_csm is only written to by the interrupt
-+ * handler.
-+ */
-+
-+/*
-+ * Threshold values for RX buffer allocation - the low water marks for
-+ * when to start refilling the rings are set to 75% of the ring
-+ * sizes. It seems to make sense to refill the rings entirely from the
-+ * intrrupt handler once it gets below the panic threshold, that way
-+ * we don't risk that the refilling is moved to another CPU when the
-+ * one running the interrupt handler just got the slab code hot in its
-+ * cache.
-+ */
-+#define RX_RING_SIZE AR2313_DESCR_ENTRIES
-+#define RX_PANIC_THRES (RX_RING_SIZE/4)
-+#define RX_LOW_THRES ((3*RX_RING_SIZE)/4)
-+#define CRC_LEN 4
-+#define RX_OFFSET 2
-+
-+#define AR2313_BUFSIZE (AR2313_MTU + ETH_HLEN + CRC_LEN + RX_OFFSET)
-+
-+#ifdef MODULE
-+MODULE_AUTHOR("Sameer Dekate <sdekate@arubanetworks.com>, Imre Kaloz <kaloz@openwrt.org>, Felix Fietkau <nbd@openwrt.org>");
-+MODULE_DESCRIPTION("AR2313 Ethernet driver");
-+#endif
-+
-+#if DEBUG
-+static char version[] __initdata =
-+ "ar2313.c: v0.03 2006/07/12 sdekate@arubanetworks.com\n";
-+#endif /* DEBUG */
-+
-+#define virt_to_phys(x) ((u32)(x) & 0x1fffffff)
-+
-+// prototypes
-+static short armiiread(short phy, short reg);
-+static void armiiwrite(short phy, short reg, short data);
-+#ifdef TX_TIMEOUT
-+static void ar2313_tx_timeout(struct net_device *dev);
-+#endif
-+static void ar2313_halt(struct net_device *dev);
-+static void rx_tasklet_func(unsigned long data);
-+static void ar2313_multicast_list(struct net_device *dev);
-+
-+static int probed __initdata = 0;
-+static unsigned long ar_eth_base;
-+static unsigned long ar_dma_base;
-+static unsigned long ar_int_base;
-+static unsigned long ar_int_mac_mask;
-+static unsigned long ar_int_phy_mask;
-+
-+#ifndef ERR
-+#define ERR(fmt, args...) printk("%s: " fmt, __func__, ##args)
-+#endif
-+
-+
-+int __init ar2313_probe(struct platform_device *pdev)
-+{
-+ struct net_device *dev;
-+ struct ar2313_private *sp;
-+ struct ar531x_eth *cfg;
-+ struct resource *res;
-+ int version_disp;
-+ char name[64] ;
-+
-+ if (probed)
-+ return -ENODEV;
-+ probed++;
-+
-+ version_disp = 0;
-+ sprintf(name, "%s%%d", ifname) ;
-+ dev = alloc_etherdev(sizeof(struct ar2313_private));
-+
-+ if (dev == NULL) {
-+ printk(KERN_ERR "ar2313: Unable to allocate net_device structure!\n");
-+ return -ENOMEM;
-+ }
-+
-+ SET_MODULE_OWNER(dev);
-+ platform_set_drvdata(pdev, dev);
-+
-+ sp = dev->priv;
-+ sp->dev = dev;
-+ cfg = pdev->dev.platform_data;
-+
-+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "eth_membase");
-+ if (!res)
-+ return -ENODEV;
-+
-+ sp->link = 0;
-+ ar_eth_base = res->start;
-+ ar_dma_base = ar_eth_base + 0x1000;
-+ ar_int_base = cfg->reset_base;
-+ ar_int_mac_mask = cfg->reset_mac;
-+ ar_int_phy_mask = cfg->reset_phy;
-+ sp->phy = cfg->phy;
-+
-+ dev->irq = platform_get_irq_byname(pdev, "eth_irq");
-+
-+ spin_lock_init(&sp->lock);
-+
-+ /* initialize func pointers */
-+ dev->open = &ar2313_open;
-+ dev->stop = &ar2313_close;
-+ dev->hard_start_xmit = &ar2313_start_xmit;
-+
-+ dev->get_stats = &ar2313_get_stats;
-+ dev->set_multicast_list = &ar2313_multicast_list;
-+#ifdef TX_TIMEOUT
-+ dev->tx_timeout = ar2313_tx_timeout;
-+ dev->watchdog_timeo = AR2313_TX_TIMEOUT;
-+#endif
-+ dev->do_ioctl = &ar2313_ioctl;
-+
-+ // SAMEER: do we need this?
-+ dev->features |= NETIF_F_SG | NETIF_F_HIGHDMA;
-+
-+ tasklet_init(&sp->rx_tasklet, rx_tasklet_func, (unsigned long) dev);
-+ tasklet_disable(&sp->rx_tasklet);
-+
-+ /* display version info if adapter is found */
-+ if (!version_disp) {
-+ /* set display flag to TRUE so that */
-+ /* we only display this string ONCE */
-+ version_disp = 1;
-+#if DEBUG
-+ printk(version);
-+#endif /* DEBUG */
-+ }
-+
-+#if 0
-+ request_region(PHYSADDR(ar_eth_base), ETHERNET_SIZE*ETHERNET_MACS,
-+ "AR2313ENET");
-+#endif
-+
-+ sp->eth_regs = ioremap_nocache(PHYSADDR(ar_eth_base), sizeof(*sp->eth_regs));
-+ if (!sp->eth_regs) {
-+ printk("Can't remap eth registers\n");
-+ return(-ENXIO);
-+ }
-+
-+ sp->dma_regs = ioremap_nocache(PHYSADDR(ar_eth_base + 0x1000), sizeof(*sp->dma_regs));
-+ dev->base_addr = (unsigned int) sp->dma_regs;
-+ if (!sp->dma_regs) {
-+ printk("Can't remap DMA registers\n");
-+ return(-ENXIO);
-+ }
-+
-+ sp->int_regs = ioremap_nocache(PHYSADDR(ar_int_base), 4);
-+ if (!sp->int_regs) {
-+ printk("Can't remap INTERRUPT registers\n");
-+ return(-ENXIO);
-+ }
-+
-+ strncpy(sp->name, "Atheros AR2313", sizeof (sp->name) - 1);
-+ sp->name [sizeof (sp->name) - 1] = '\0';
-+
-+ {
-+ /* XXX: Will have to rewrite this part later */
-+ char *configstart;
-+ unsigned char def_mac[6] = {0, 0xaa, 0xbb, 0xcc, 0xdd, 0xee};
-+
-+ configstart = (char *) cfg->board_config;
-+
-+ if (!configstart) {
-+ printk("no valid mac found, using defaults");
-+ memcpy(dev->dev_addr, def_mac, 6);
-+ } else {
-+ memcpy(dev->dev_addr, ((u8 *)configstart)+102, 6);
-+ }
-+ }
-+
-+ sp->board_idx = BOARD_IDX_STATIC;
-+
-+ if (ar2313_init(dev)) {
-+ /*
-+ * ar2313_init() calls ar2313_init_cleanup() on error.
-+ */
-+ kfree(dev);
-+ return -ENODEV;
-+ }
-+
-+ if (register_netdev(dev)){
-+ printk("%s: register_netdev failed\n", __func__);
-+ return -1;
-+ }
-+
-+ printk("%s: %s: %02x:%02x:%02x:%02x:%02x:%02x, irq %d\n",
-+ dev->name, sp->name,
-+ dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2],
-+ dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5],
-+ dev->irq);
-+
-+ /* start link poll timer */
-+ ar2313_setup_timer(dev);
-+
-+ return 0;
-+}
-+
-+#if 0
-+static void ar2313_dump_regs(struct net_device *dev)
-+{
-+ unsigned int *ptr, i;
-+ struct ar2313_private *sp = (struct ar2313_private *)dev->priv;
-+
-+ ptr = (unsigned int *)sp->eth_regs;
-+ for(i=0; i< (sizeof(ETHERNET_STRUCT)/ sizeof(unsigned int)); i++, ptr++) {
-+ printk("ENET: %08x = %08x\n", (int)ptr, *ptr);
-+ }
-+
-+ ptr = (unsigned int *)sp->dma_regs;
-+ for(i=0; i< (sizeof(DMA)/ sizeof(unsigned int)); i++, ptr++) {
-+ printk("DMA: %08x = %08x\n", (int)ptr, *ptr);
-+ }
-+
-+ ptr = (unsigned int *)sp->int_regs;
-+ for(i=0; i< (sizeof(INTERRUPT)/ sizeof(unsigned int)); i++, ptr++){
-+ printk("INT: %08x = %08x\n", (int)ptr, *ptr);
-+ }
-+
-+ for (i = 0; i < AR2313_DESCR_ENTRIES; i++) {
-+ ar2313_descr_t *td = &sp->tx_ring[i];
-+ printk("Tx desc %2d: %08x %08x %08x %08x\n", i,
-+ td->status, td->devcs, td->addr, td->descr);
-+ }
-+}
-+#endif
-+
-+#ifdef TX_TIMEOUT
-+static void
-+ar2313_tx_timeout(struct net_device *dev)
-+{
-+ struct ar2313_private *sp = (struct ar2313_private *)dev->priv;
-+ unsigned long flags;
-+
-+#if DEBUG_TX
-+ printk("Tx timeout\n");
-+#endif
-+ spin_lock_irqsave(&sp->lock, flags);
-+ ar2313_restart(dev);
-+ spin_unlock_irqrestore(&sp->lock, flags);
-+}
-+#endif
-+
-+#if DEBUG_MC
-+static void
-+printMcList(struct net_device *dev)
-+{
-+ struct dev_mc_list *list = dev->mc_list;
-+ int num=0, i;
-+ while(list){
-+ printk("%d MC ADDR ", num);
-+ for(i=0;i<list->dmi_addrlen;i++) {
-+ printk(":%02x", list->dmi_addr[i]);
-+ }
-+ list = list->next;
-+ printk("\n");
-+ }
-+}
-+#endif
-+
-+/*
-+ * Set or clear the multicast filter for this adaptor.
-+ * THIS IS ABSOLUTE CRAP, disabled
-+ */
-+static void
-+ar2313_multicast_list(struct net_device *dev)
-+{
-+ /*
-+ * Always listen to broadcasts and
-+ * treat IFF bits independently
-+ */
-+ struct ar2313_private *sp = (struct ar2313_private *)dev->priv;
-+ unsigned int recognise;
-+
-+ recognise = sp->eth_regs->mac_control;
-+
-+ if (dev->flags & IFF_PROMISC) { /* set promiscuous mode */
-+ recognise |= MAC_CONTROL_PR;
-+ } else {
-+ recognise &= ~MAC_CONTROL_PR;
-+ }
-+
-+ if ((dev->flags & IFF_ALLMULTI) || (dev->mc_count > 15)) {
-+#if DEBUG_MC
-+ printMcList(dev);
-+ printk("%s: all MULTICAST mc_count %d\n", __FUNCTION__, dev->mc_count);
-+#endif
-+ recognise |= MAC_CONTROL_PM;/* all multicast */
-+ } else if (dev->mc_count > 0) {
-+#if DEBUG_MC
-+ printMcList(dev);
-+ printk("%s: mc_count %d\n", __FUNCTION__, dev->mc_count);
-+#endif
-+ recognise |= MAC_CONTROL_PM; /* for the time being */
-+ }
-+#if DEBUG_MC
-+ printk("%s: setting %08x to %08x\n", __FUNCTION__, (int)sp->eth_regs, recognise);
-+#endif
-+
-+ sp->eth_regs->mac_control = recognise;
-+}
-+
-+static void rx_tasklet_cleanup(struct net_device *dev)
-+{
-+ struct ar2313_private *sp = dev->priv;
-+
-+ /*
-+ * Tasklet may be scheduled. Need to get it removed from the list
-+ * since we're about to free the struct.
-+ */
-+
-+ sp->unloading = 1;
-+ tasklet_enable(&sp->rx_tasklet);
-+ tasklet_kill(&sp->rx_tasklet);
-+}
-+
-+static int __exit ar2313_remove(struct platform_device *pdev)
-+{
-+ struct net_device *dev = platform_get_drvdata(pdev);
-+ rx_tasklet_cleanup(dev);
-+ ar2313_init_cleanup(dev);
-+ unregister_netdev(dev);
-+ kfree(dev);
-+ return 0;
-+}
-+
-+
-+/*
-+ * Restart the AR2313 ethernet controller.
-+ */
-+static int ar2313_restart(struct net_device *dev)
-+{
-+ /* disable interrupts */
-+ disable_irq(dev->irq);
-+
-+ /* stop mac */
-+ ar2313_halt(dev);
-+
-+ /* initialize */
-+ ar2313_init(dev);
-+
-+ /* enable interrupts */
-+ enable_irq(dev->irq);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver ar2313_driver = {
-+ .driver.name = "ar531x-eth",
-+ .probe = ar2313_probe,
-+ .remove = ar2313_remove,
-+};
-+
-+int __init ar2313_module_init(void)
-+{
-+ return platform_driver_register(&ar2313_driver);
-+}
-+
-+void __exit ar2313_module_cleanup(void)
-+{
-+ platform_driver_unregister(&ar2313_driver);
-+}
-+
-+module_init(ar2313_module_init);
-+module_exit(ar2313_module_cleanup);
-+
-+
-+static void ar2313_free_descriptors(struct net_device *dev)
-+{
-+ struct ar2313_private *sp = dev->priv;
-+ if (sp->rx_ring != NULL) {
-+ kfree((void*)KSEG0ADDR(sp->rx_ring));
-+ sp->rx_ring = NULL;
-+ sp->tx_ring = NULL;
-+ }
-+}
-+
-+
-+static int ar2313_allocate_descriptors(struct net_device *dev)
-+{
-+ struct ar2313_private *sp = dev->priv;
-+ int size;
-+ int j;
-+ ar2313_descr_t *space;
-+
-+ if(sp->rx_ring != NULL){
-+ printk("%s: already done.\n", __FUNCTION__);
-+ return 0;
-+ }
-+
-+ size = (sizeof(ar2313_descr_t) * (AR2313_DESCR_ENTRIES * AR2313_QUEUES));
-+ space = kmalloc(size, GFP_KERNEL);
-+ if (space == NULL)
-+ return 1;
-+
-+ /* invalidate caches */
-+ dma_cache_inv((unsigned int)space, size);
-+
-+ /* now convert pointer to KSEG1 */
-+ space = (ar2313_descr_t *)KSEG1ADDR(space);
-+
-+ memset((void *)space, 0, size);
-+
-+ sp->rx_ring = space;
-+ space += AR2313_DESCR_ENTRIES;
-+
-+ sp->tx_ring = space;
-+ space += AR2313_DESCR_ENTRIES;
-+
-+ /* Initialize the transmit Descriptors */
-+ for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
-+ ar2313_descr_t *td = &sp->tx_ring[j];
-+ td->status = 0;
-+ td->devcs = DMA_TX1_CHAINED;
-+ td->addr = 0;
-+ td->descr = K1_TO_PHYS(&sp->tx_ring[(j+1) & (AR2313_DESCR_ENTRIES-1)]);
-+ }
-+
-+ return 0;
-+}
-+
-+
-+/*
-+ * Generic cleanup handling data allocated during init. Used when the
-+ * module is unloaded or if an error occurs during initialization
-+ */
-+static void ar2313_init_cleanup(struct net_device *dev)
-+{
-+ struct ar2313_private *sp = dev->priv;
-+ struct sk_buff *skb;
-+ int j;
-+
-+ ar2313_free_descriptors(dev);
-+
-+ if (sp->eth_regs) iounmap((void*)sp->eth_regs);
-+ if (sp->dma_regs) iounmap((void*)sp->dma_regs);
-+
-+ if (sp->rx_skb) {
-+ for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
-+ skb = sp->rx_skb[j];
-+ if (skb) {
-+ sp->rx_skb[j] = NULL;
-+ dev_kfree_skb(skb);
-+ }
-+ }
-+ kfree(sp->rx_skb);
-+ sp->rx_skb = NULL;
-+ }
-+
-+ if (sp->tx_skb) {
-+ for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
-+ skb = sp->tx_skb[j];
-+ if (skb) {
-+ sp->tx_skb[j] = NULL;
-+ dev_kfree_skb(skb);
-+ }
-+ }
-+ kfree(sp->tx_skb);
-+ sp->tx_skb = NULL;
-+ }
-+}
-+
-+static int ar2313_setup_timer(struct net_device *dev)
-+{
-+ struct ar2313_private *sp = dev->priv;
-+
-+ init_timer(&sp->link_timer);
-+
-+ sp->link_timer.function = ar2313_link_timer_fn;
-+ sp->link_timer.data = (int) dev;
-+ sp->link_timer.expires = jiffies + HZ;
-+
-+ add_timer(&sp->link_timer);
-+ return 0;
-+
-+}
-+
-+static void ar2313_link_timer_fn(unsigned long data)
-+{
-+ struct net_device *dev = (struct net_device *) data;
-+ struct ar2313_private *sp = dev->priv;
-+
-+ // see if the link status changed
-+ // This was needed to make sure we set the PHY to the
-+ // autonegotiated value of half or full duplex.
-+ ar2313_check_link(dev);
-+
-+ // Loop faster when we don't have link.
-+ // This was needed to speed up the AP bootstrap time.
-+ if(sp->link == 0) {
-+ mod_timer(&sp->link_timer, jiffies + HZ/2);
-+ } else {
-+ mod_timer(&sp->link_timer, jiffies + LINK_TIMER);
-+ }
-+}
-+
-+static void ar2313_check_link(struct net_device *dev)
-+{
-+ struct ar2313_private *sp = dev->priv;
-+ u16 phyData;
-+
-+ phyData = armiiread(sp->phy, MII_BMSR);
-+ if (sp->phyData != phyData) {
-+ if (phyData & BMSR_LSTATUS) {
-+ /* link is present, ready link partner ability to deterine duplexity */
-+ int duplex = 0;
-+ u16 reg;
-+
-+ sp->link = 1;
-+ reg = armiiread(sp->phy, MII_BMCR);
-+ if (reg & BMCR_ANENABLE) {
-+ /* auto neg enabled */
-+ reg = armiiread(sp->phy, MII_LPA);
-+ duplex = (reg & (LPA_100FULL|LPA_10FULL))? 1:0;
-+ } else {
-+ /* no auto neg, just read duplex config */
-+ duplex = (reg & BMCR_FULLDPLX)? 1:0;
-+ }
-+
-+ printk(KERN_INFO "%s: Configuring MAC for %s duplex\n", dev->name,
-+ (duplex)? "full":"half");
-+
-+ if (duplex) {
-+ /* full duplex */
-+ sp->eth_regs->mac_control = ((sp->eth_regs->mac_control | MAC_CONTROL_F) &
-+ ~MAC_CONTROL_DRO);
-+ } else {
-+ /* half duplex */
-+ sp->eth_regs->mac_control = ((sp->eth_regs->mac_control | MAC_CONTROL_DRO) &
-+ ~MAC_CONTROL_F);
-+ }
-+ } else {
-+ /* no link */
-+ sp->link = 0;
-+ }
-+ sp->phyData = phyData;
-+ }
-+}
-+
-+static int
-+ar2313_reset_reg(struct net_device *dev)
-+{
-+ struct ar2313_private *sp = (struct ar2313_private *)dev->priv;
-+ unsigned int ethsal, ethsah;
-+ unsigned int flags;
-+
-+ *sp->int_regs |= ar_int_mac_mask;
-+ mdelay(10);
-+ *sp->int_regs &= ~ar_int_mac_mask;
-+ mdelay(10);
-+ *sp->int_regs |= ar_int_phy_mask;
-+ mdelay(10);
-+ *sp->int_regs &= ~ar_int_phy_mask;
-+ mdelay(10);
-+
-+ sp->dma_regs->bus_mode = (DMA_BUS_MODE_SWR);
-+ mdelay(10);
-+ sp->dma_regs->bus_mode = ((32 << DMA_BUS_MODE_PBL_SHIFT) | DMA_BUS_MODE_BLE);
-+
-+ /* enable interrupts */
-+ sp->dma_regs->intr_ena = (DMA_STATUS_AIS |
-+ DMA_STATUS_NIS |
-+ DMA_STATUS_RI |
-+ DMA_STATUS_TI |
-+ DMA_STATUS_FBE);
-+ sp->dma_regs->xmt_base = K1_TO_PHYS(sp->tx_ring);
-+ sp->dma_regs->rcv_base = K1_TO_PHYS(sp->rx_ring);
-+ sp->dma_regs->control = (DMA_CONTROL_SR | DMA_CONTROL_ST | DMA_CONTROL_SF);
-+
-+ sp->eth_regs->flow_control = (FLOW_CONTROL_FCE);
-+ sp->eth_regs->vlan_tag = (0x8100);
-+
-+ /* Enable Ethernet Interface */
-+ flags = (MAC_CONTROL_TE | /* transmit enable */
-+ MAC_CONTROL_PM | /* pass mcast */
-+ MAC_CONTROL_F | /* full duplex */
-+ MAC_CONTROL_HBD); /* heart beat disabled */
-+
-+ if (dev->flags & IFF_PROMISC) { /* set promiscuous mode */
-+ flags |= MAC_CONTROL_PR;
-+ }
-+ sp->eth_regs->mac_control = flags;
-+
-+ /* Set all Ethernet station address registers to their initial values */
-+ ethsah = ((((u_int)(dev->dev_addr[5]) << 8) & (u_int)0x0000FF00) |
-+ (((u_int)(dev->dev_addr[4]) << 0) & (u_int)0x000000FF));
-+
-+ ethsal = ((((u_int)(dev->dev_addr[3]) << 24) & (u_int)0xFF000000) |
-+ (((u_int)(dev->dev_addr[2]) << 16) & (u_int)0x00FF0000) |
-+ (((u_int)(dev->dev_addr[1]) << 8) & (u_int)0x0000FF00) |
-+ (((u_int)(dev->dev_addr[0]) << 0) & (u_int)0x000000FF) );
-+
-+ sp->eth_regs->mac_addr[0] = ethsah;
-+ sp->eth_regs->mac_addr[1] = ethsal;
-+
-+ mdelay(10);
-+
-+ return(0);
-+}
-+
-+
-+static int ar2313_init(struct net_device *dev)
-+{
-+ struct ar2313_private *sp = dev->priv;
-+ int ecode=0;
-+
-+ /*
-+ * Allocate descriptors
-+ */
-+ if (ar2313_allocate_descriptors(dev)) {
-+ printk("%s: %s: ar2313_allocate_descriptors failed\n",
-+ dev->name, __FUNCTION__);
-+ ecode = -EAGAIN;
-+ goto init_error;
-+ }
-+
-+ /*
-+ * Get the memory for the skb rings.
-+ */
-+ if(sp->rx_skb == NULL) {
-+ sp->rx_skb = kmalloc(sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES, GFP_KERNEL);
-+ if (!(sp->rx_skb)) {
-+ printk("%s: %s: rx_skb kmalloc failed\n",
-+ dev->name, __FUNCTION__);
-+ ecode = -EAGAIN;
-+ goto init_error;
-+ }
-+ }
-+ memset(sp->rx_skb, 0, sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES);
-+
-+ if(sp->tx_skb == NULL) {
-+ sp->tx_skb = kmalloc(sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES, GFP_KERNEL);
-+ if (!(sp->tx_skb)) {
-+ printk("%s: %s: tx_skb kmalloc failed\n",
-+ dev->name, __FUNCTION__);
-+ ecode = -EAGAIN;
-+ goto init_error;
-+ }
-+ }
-+ memset(sp->tx_skb, 0, sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES);
-+
-+ /*
-+ * Set tx_csm before we start receiving interrupts, otherwise
-+ * the interrupt handler might think it is supposed to process
-+ * tx ints before we are up and running, which may cause a null
-+ * pointer access in the int handler.
-+ */
-+ sp->rx_skbprd = 0;
-+ sp->cur_rx = 0;
-+ sp->tx_prd = 0;
-+ sp->tx_csm = 0;
-+
-+ /*
-+ * Zero the stats before starting the interface
-+ */
-+ memset(&sp->stats, 0, sizeof(sp->stats));
-+
-+ /*
-+ * We load the ring here as there seem to be no way to tell the
-+ * firmware to wipe the ring without re-initializing it.
-+ */
-+ ar2313_load_rx_ring(dev, RX_RING_SIZE);
-+
-+ /*
-+ * Init hardware
-+ */
-+ ar2313_reset_reg(dev);
-+
-+ /*
-+ * Get the IRQ
-+ */
-+ ecode = request_irq(dev->irq, &ar2313_interrupt, IRQF_SHARED | IRQF_DISABLED | IRQF_SAMPLE_RANDOM, dev->name, dev);
-+ if (ecode) {
-+ printk(KERN_WARNING "%s: %s: Requested IRQ %d is busy\n",
-+ dev->name, __FUNCTION__, dev->irq);
-+ goto init_error;
-+ }
-+
-+
-+ tasklet_enable(&sp->rx_tasklet);
-+
-+ return 0;
-+
-+ init_error:
-+ ar2313_init_cleanup(dev);
-+ return ecode;
-+}
-+
-+/*
-+ * Load the rx ring.
-+ *
-+ * Loading rings is safe without holding the spin lock since this is
-+ * done only before the device is enabled, thus no interrupts are
-+ * generated and by the interrupt handler/tasklet handler.
-+ */
-+static void ar2313_load_rx_ring(struct net_device *dev, int nr_bufs)
-+{
-+
-+ struct ar2313_private *sp = ((struct net_device *)dev)->priv;
-+ short i, idx;
-+
-+ idx = sp->rx_skbprd;
-+
-+ for (i = 0; i < nr_bufs; i++) {
-+ struct sk_buff *skb;
-+ ar2313_descr_t *rd;
-+
-+ if (sp->rx_skb[idx]) {
-+#if DEBUG_RX
-+ printk(KERN_INFO "ar2313 rx refill full\n");
-+#endif /* DEBUG */
-+ break;
-+ }
-+
-+ // partha: create additional room for the second GRE fragment
-+ skb = alloc_skb(AR2313_BUFSIZE+128, GFP_ATOMIC);
-+ if (!skb) {
-+ printk("\n\n\n\n %s: No memory in system\n\n\n\n", __FUNCTION__);
-+ break;
-+ }
-+ // partha: create additional room in the front for tx pkt capture
-+ skb_reserve(skb, 32);
-+
-+ /*
-+ * Make sure IP header starts on a fresh cache line.
-+ */
-+ skb->dev = dev;
-+ skb_reserve(skb, RX_OFFSET);
-+ sp->rx_skb[idx] = skb;
-+
-+ rd = (ar2313_descr_t *) &sp->rx_ring[idx];
-+
-+ /* initialize dma descriptor */
-+ rd->devcs = ((AR2313_BUFSIZE << DMA_RX1_BSIZE_SHIFT) |
-+ DMA_RX1_CHAINED);
-+ rd->addr = virt_to_phys(skb->data);
-+ rd->descr = virt_to_phys(&sp->rx_ring[(idx+1) & (AR2313_DESCR_ENTRIES-1)]);
-+ rd->status = DMA_RX_OWN;
-+
-+ idx = DSC_NEXT(idx);
-+ }
-+
-+ if (!i) {
-+#if DEBUG_ERR
-+ printk(KERN_INFO "Out of memory when allocating standard receive buffers\n");
-+#endif /* DEBUG */
-+ } else {
-+ sp->rx_skbprd = idx;
-+ }
-+
-+ return;
-+}
-+
-+#define AR2313_MAX_PKTS_PER_CALL 64
-+
-+static int ar2313_rx_int(struct net_device *dev)
-+{
-+ struct ar2313_private *sp = dev->priv;
-+ struct sk_buff *skb, *skb_new;
-+ ar2313_descr_t *rxdesc;
-+ unsigned int status;
-+ u32 idx;
-+ int pkts = 0;
-+ int rval;
-+
-+ idx = sp->cur_rx;
-+
-+ /* process at most the entire ring and then wait for another interrupt */
-+ while(1) {
-+
-+ rxdesc = &sp->rx_ring[idx];
-+ status = rxdesc->status;
-+ if (status & DMA_RX_OWN) {
-+ /* SiByte owns descriptor or descr not yet filled in */
-+ rval = 0;
-+ break;
-+ }
-+
-+ if (++pkts > AR2313_MAX_PKTS_PER_CALL) {
-+ rval = 1;
-+ break;
-+ }
-+
-+#if DEBUG_RX
-+ printk("index %d\n", idx);
-+ printk("RX status %08x\n", rxdesc->status);
-+ printk("RX devcs %08x\n", rxdesc->devcs );
-+ printk("RX addr %08x\n", rxdesc->addr );
-+ printk("RX descr %08x\n", rxdesc->descr );
-+#endif
-+
-+ if ((status & (DMA_RX_ERROR|DMA_RX_ERR_LENGTH)) &&
-+ (!(status & DMA_RX_LONG))){
-+#if DEBUG_RX
-+ printk("%s: rx ERROR %08x\n", __FUNCTION__, status);
-+#endif
-+ sp->stats.rx_errors++;
-+ sp->stats.rx_dropped++;
-+
-+ /* add statistics counters */
-+ if (status & DMA_RX_ERR_CRC) sp->stats.rx_crc_errors++;
-+ if (status & DMA_RX_ERR_COL) sp->stats.rx_over_errors++;
-+ if (status & DMA_RX_ERR_LENGTH)
-+ sp->stats.rx_length_errors++;
-+ if (status & DMA_RX_ERR_RUNT) sp->stats.rx_over_errors++;
-+ if (status & DMA_RX_ERR_DESC) sp->stats.rx_over_errors++;
-+
-+ } else {
-+ /* alloc new buffer. */
-+ skb_new = dev_alloc_skb(AR2313_BUFSIZE + RX_OFFSET + 128);
-+ if (skb_new != NULL) {
-+
-+ skb = sp->rx_skb[idx];
-+ /* set skb */
-+ skb_put(skb, ((status >> DMA_RX_LEN_SHIFT) & 0x3fff) - CRC_LEN);
-+
-+#ifdef CONFIG_MERLOT
-+ if ((dev->am_pkt_handler == NULL) ||
-+ (dev->am_pkt_handler(skb, dev) == 0)) {
-+#endif
-+ sp->stats.rx_bytes += skb->len;
-+ skb->protocol = eth_type_trans(skb, dev);
-+ /* pass the packet to upper layers */
-+
-+#ifdef CONFIG_MERLOT
-+ if (dev->asap_netif_rx)
-+ dev->asap_netif_rx(skb);
-+ else
-+#endif
-+ netif_rx(skb);
-+#ifdef CONFIG_MERLOT
-+ }
-+#endif
-+ skb_new->dev = dev;
-+ /* 16 bit align */
-+ skb_reserve(skb_new, RX_OFFSET+32);
-+ /* reset descriptor's curr_addr */
-+ rxdesc->addr = virt_to_phys(skb_new->data);
-+
-+ sp->stats.rx_packets++;
-+ sp->rx_skb[idx] = skb_new;
-+
-+ } else {
-+ sp->stats.rx_dropped++;
-+ }
-+ }
-+
-+ rxdesc->devcs = ((AR2313_BUFSIZE << DMA_RX1_BSIZE_SHIFT) |
-+ DMA_RX1_CHAINED);
-+ rxdesc->status = DMA_RX_OWN;
-+
-+ idx = DSC_NEXT(idx);
-+ }
-+
-+ sp->cur_rx = idx;
-+
-+ return rval;
-+}
-+
-+
-+static void ar2313_tx_int(struct net_device *dev)
-+{
-+ struct ar2313_private *sp = dev->priv;
-+ u32 idx;
-+ struct sk_buff *skb;
-+ ar2313_descr_t *txdesc;
-+ unsigned int status=0;
-+
-+ idx = sp->tx_csm;
-+
-+ while (idx != sp->tx_prd) {
-+
-+ txdesc = &sp->tx_ring[idx];
-+
-+#if DEBUG_TX
-+ printk("%s: TXINT: csm=%d idx=%d prd=%d status=%x devcs=%x addr=%08x descr=%x\n",
-+ dev->name, sp->tx_csm, idx, sp->tx_prd,
-+ txdesc->status, txdesc->devcs, txdesc->addr, txdesc->descr);
-+#endif /* DEBUG */
-+
-+ if ((status = txdesc->status) & DMA_TX_OWN) {
-+ /* ar2313 dma still owns descr */
-+ break;
-+ }
-+ /* done with this descriptor */
-+ dma_unmap_single(NULL, txdesc->addr, txdesc->devcs & DMA_TX1_BSIZE_MASK, DMA_TO_DEVICE);
-+ txdesc->status = 0;
-+
-+ if (status & DMA_TX_ERROR){
-+ sp->stats.tx_errors++;
-+ sp->stats.tx_dropped++;
-+ if(status & DMA_TX_ERR_UNDER)
-+ sp->stats.tx_fifo_errors++;
-+ if(status & DMA_TX_ERR_HB)
-+ sp->stats.tx_heartbeat_errors++;
-+ if(status & (DMA_TX_ERR_LOSS |
-+ DMA_TX_ERR_LINK))
-+ sp->stats.tx_carrier_errors++;
-+ if (status & (DMA_TX_ERR_LATE|
-+ DMA_TX_ERR_COL |
-+ DMA_TX_ERR_JABBER |
-+ DMA_TX_ERR_DEFER))
-+ sp->stats.tx_aborted_errors++;
-+ } else {
-+ /* transmit OK */
-+ sp->stats.tx_packets++;
-+ }
-+
-+ skb = sp->tx_skb[idx];
-+ sp->tx_skb[idx] = NULL;
-+ idx = DSC_NEXT(idx);
-+ sp->stats.tx_bytes += skb->len;
-+ dev_kfree_skb_irq(skb);
-+ }
-+
-+ sp->tx_csm = idx;
-+
-+ return;
-+}
-+
-+
-+static void
-+rx_tasklet_func(unsigned long data)
-+{
-+ struct net_device *dev = (struct net_device *) data;
-+ struct ar2313_private *sp = dev->priv;
-+
-+ if (sp->unloading) {
-+ return;
-+ }
-+
-+ if (ar2313_rx_int(dev)) {
-+ tasklet_hi_schedule(&sp->rx_tasklet);
-+ }
-+ else {
-+ unsigned long flags;
-+ spin_lock_irqsave(&sp->lock, flags);
-+ sp->dma_regs->intr_ena |= DMA_STATUS_RI;
-+ spin_unlock_irqrestore(&sp->lock, flags);
-+ }
-+}
-+
-+static void
-+rx_schedule(struct net_device *dev)
-+{
-+ struct ar2313_private *sp = dev->priv;
-+
-+ sp->dma_regs->intr_ena &= ~DMA_STATUS_RI;
-+
-+ tasklet_hi_schedule(&sp->rx_tasklet);
-+}
-+
-+static irqreturn_t ar2313_interrupt(int irq, void *dev_id)
-+{
-+ struct net_device *dev = (struct net_device *)dev_id;
-+ struct ar2313_private *sp = dev->priv;
-+ unsigned int status, enabled;
-+
-+ /* clear interrupt */
-+ /*
-+ * Don't clear RI bit if currently disabled.
-+ */
-+ status = sp->dma_regs->status;
-+ enabled = sp->dma_regs->intr_ena;
-+ sp->dma_regs->status = status & enabled;
-+
-+ if (status & DMA_STATUS_NIS) {
-+ /* normal status */
-+ /*
-+ * Don't schedule rx processing if interrupt
-+ * is already disabled.
-+ */
-+ if (status & enabled & DMA_STATUS_RI) {
-+ /* receive interrupt */
-+ rx_schedule(dev);
-+ }
-+ if (status & DMA_STATUS_TI) {
-+ /* transmit interrupt */
-+ ar2313_tx_int(dev);
-+ }
-+ }
-+
-+ if (status & DMA_STATUS_AIS) {
-+#if DEBUG_INT
-+ printk("%s: AIS set %08x & %x\n", __FUNCTION__,
-+ status, (DMA_STATUS_FBE | DMA_STATUS_TPS));
-+#endif
-+ /* abnormal status */
-+ if (status & (DMA_STATUS_FBE | DMA_STATUS_TPS)) {
-+ ar2313_restart(dev);
-+ }
-+ }
-+ return IRQ_HANDLED;
-+}
-+
-+
-+static int ar2313_open(struct net_device *dev)
-+{
-+ struct ar2313_private *sp;
-+
-+ sp = dev->priv;
-+
-+ dev->mtu = 1500;
-+ netif_start_queue(dev);
-+
-+ sp->eth_regs->mac_control |= MAC_CONTROL_RE;
-+
-+ AR2313_MOD_INC_USE_COUNT;
-+
-+ return 0;
-+}
-+
-+static void ar2313_halt(struct net_device *dev)
-+{
-+ struct ar2313_private *sp = dev->priv;
-+ int j;
-+
-+ tasklet_disable(&sp->rx_tasklet);
-+
-+ /* kill the MAC */
-+ sp->eth_regs->mac_control &= ~(MAC_CONTROL_RE | /* disable Receives */
-+ MAC_CONTROL_TE); /* disable Transmits */
-+ /* stop dma */
-+ sp->dma_regs->control = 0;
-+ sp->dma_regs->bus_mode = DMA_BUS_MODE_SWR;
-+
-+ /* place phy and MAC in reset */
-+ *sp->int_regs |= (ar_int_mac_mask | ar_int_phy_mask);
-+
-+ /* free buffers on tx ring */
-+ for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
-+ struct sk_buff *skb;
-+ ar2313_descr_t *txdesc;
-+
-+ txdesc = &sp->tx_ring[j];
-+ txdesc->descr = 0;
-+
-+ skb = sp->tx_skb[j];
-+ if (skb) {
-+ dev_kfree_skb(skb);
-+ sp->tx_skb[j] = NULL;
-+ }
-+ }
-+}
-+
-+/*
-+ * close should do nothing. Here's why. It's called when
-+ * 'ifconfig bond0 down' is run. If it calls free_irq then
-+ * the irq is gone forever ! When bond0 is made 'up' again,
-+ * the ar2313_open () does not call request_irq (). Worse,
-+ * the call to ar2313_halt() generates a WDOG reset due to
-+ * the write to 'sp->int_regs' and the box reboots.
-+ * Commenting this out is good since it allows the
-+ * system to resume when bond0 is made up again.
-+ */
-+static int ar2313_close(struct net_device *dev)
-+{
-+#if 0
-+ /*
-+ * Disable interrupts
-+ */
-+ disable_irq(dev->irq);
-+
-+ /*
-+ * Without (or before) releasing irq and stopping hardware, this
-+ * is an absolute non-sense, by the way. It will be reset instantly
-+ * by the first irq.
-+ */
-+ netif_stop_queue(dev);
-+
-+ /* stop the MAC and DMA engines */
-+ ar2313_halt(dev);
-+
-+ /* release the interrupt */
-+ free_irq(dev->irq, dev);
-+
-+#endif
-+ AR2313_MOD_DEC_USE_COUNT;
-+ return 0;
-+}
-+
-+static int ar2313_start_xmit(struct sk_buff *skb, struct net_device *dev)
-+{
-+ struct ar2313_private *sp = dev->priv;
-+ ar2313_descr_t *td;
-+ u32 idx;
-+
-+ idx = sp->tx_prd;
-+ td = &sp->tx_ring[idx];
-+
-+ if (td->status & DMA_TX_OWN) {
-+#if DEBUG_TX
-+ printk("%s: No space left to Tx\n", __FUNCTION__);
-+#endif
-+ /* free skbuf and lie to the caller that we sent it out */
-+ sp->stats.tx_dropped++;
-+ dev_kfree_skb(skb);
-+
-+ /* restart transmitter in case locked */
-+ sp->dma_regs->xmt_poll = 0;
-+ return 0;
-+ }
-+
-+ /* Setup the transmit descriptor. */
-+ td->devcs = ((skb->len << DMA_TX1_BSIZE_SHIFT) |
-+ (DMA_TX1_LS|DMA_TX1_IC|DMA_TX1_CHAINED));
-+ td->addr = dma_map_single(NULL, skb->data, skb->len, DMA_TO_DEVICE);
-+ td->status = DMA_TX_OWN;
-+
-+ /* kick transmitter last */
-+ sp->dma_regs->xmt_poll = 0;
-+
-+#if DEBUG_TX
-+ printk("index %d\n", idx);
-+ printk("TX status %08x\n", td->status);
-+ printk("TX devcs %08x\n", td->devcs );
-+ printk("TX addr %08x\n", td->addr );
-+ printk("TX descr %08x\n", td->descr );
-+#endif
-+
-+ sp->tx_skb[idx] = skb;
-+ idx = DSC_NEXT(idx);
-+ sp->tx_prd = idx;
-+
-+ //dev->trans_start = jiffies;
-+
-+ return 0;
-+}
-+
-+static int netdev_get_ecmd(struct net_device *dev, struct ethtool_cmd *ecmd)
-+{
-+ struct ar2313_private *np = dev->priv;
-+ u32 tmp;
-+
-+ ecmd->supported =
-+ (SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full |
-+ SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full |
-+ SUPPORTED_Autoneg | SUPPORTED_TP | SUPPORTED_MII);
-+
-+ ecmd->port = PORT_TP;
-+ /* only supports internal transceiver */
-+ ecmd->transceiver = XCVR_INTERNAL;
-+ /* not sure what this is for */
-+ ecmd->phy_address = 1;
-+
-+ ecmd->advertising = ADVERTISED_MII;
-+ tmp = armiiread(np->phy, MII_ADVERTISE);
-+ if (tmp & ADVERTISE_10HALF)
-+ ecmd->advertising |= ADVERTISED_10baseT_Half;
-+ if (tmp & ADVERTISE_10FULL)
-+ ecmd->advertising |= ADVERTISED_10baseT_Full;
-+ if (tmp & ADVERTISE_100HALF)
-+ ecmd->advertising |= ADVERTISED_100baseT_Half;
-+ if (tmp & ADVERTISE_100FULL)
-+ ecmd->advertising |= ADVERTISED_100baseT_Full;
-+
-+ tmp = armiiread(np->phy, MII_BMCR);
-+ if (tmp & BMCR_ANENABLE) {
-+ ecmd->advertising |= ADVERTISED_Autoneg;
-+ ecmd->autoneg = AUTONEG_ENABLE;
-+ } else {
-+ ecmd->autoneg = AUTONEG_DISABLE;
-+ }
-+
-+ if (ecmd->autoneg == AUTONEG_ENABLE) {
-+ tmp = armiiread(np->phy, MII_LPA);
-+ if (tmp & (LPA_100FULL|LPA_10FULL)) {
-+ ecmd->duplex = DUPLEX_FULL;
-+ } else {
-+ ecmd->duplex = DUPLEX_HALF;
-+ }
-+ if (tmp & (LPA_100FULL|LPA_100HALF)) {
-+ ecmd->speed = SPEED_100;
-+ } else {
-+ ecmd->speed = SPEED_10;
-+ }
-+ } else {
-+ if (tmp & BMCR_FULLDPLX) {
-+ ecmd->duplex = DUPLEX_FULL;
-+ } else {
-+ ecmd->duplex = DUPLEX_HALF;
-+ }
-+ if (tmp & BMCR_SPEED100) {
-+ ecmd->speed = SPEED_100;
-+ } else {
-+ ecmd->speed = SPEED_10;
-+ }
-+ }
-+
-+ /* ignore maxtxpkt, maxrxpkt for now */
-+
-+ return 0;
-+}
-+
-+static int netdev_set_ecmd(struct net_device *dev, struct ethtool_cmd *ecmd)
-+{
-+ struct ar2313_private *np = dev->priv;
-+ u32 tmp;
-+
-+ if (ecmd->speed != SPEED_10 && ecmd->speed != SPEED_100)
-+ return -EINVAL;
-+ if (ecmd->duplex != DUPLEX_HALF && ecmd->duplex != DUPLEX_FULL)
-+ return -EINVAL;
-+ if (ecmd->port != PORT_TP)
-+ return -EINVAL;
-+ if (ecmd->transceiver != XCVR_INTERNAL)
-+ return -EINVAL;
-+ if (ecmd->autoneg != AUTONEG_DISABLE && ecmd->autoneg != AUTONEG_ENABLE)
-+ return -EINVAL;
-+ /* ignore phy_address, maxtxpkt, maxrxpkt for now */
-+
-+ /* WHEW! now lets bang some bits */
-+
-+ tmp = armiiread(np->phy, MII_BMCR);
-+ if (ecmd->autoneg == AUTONEG_ENABLE) {
-+ /* turn on autonegotiation */
-+ tmp |= BMCR_ANENABLE;
-+ printk("%s: Enabling auto-neg\n", dev->name);
-+ } else {
-+ /* turn off auto negotiation, set speed and duplexity */
-+ tmp &= ~(BMCR_ANENABLE | BMCR_SPEED100 | BMCR_FULLDPLX);
-+ if (ecmd->speed == SPEED_100)
-+ tmp |= BMCR_SPEED100;
-+ if (ecmd->duplex == DUPLEX_FULL)
-+ tmp |= BMCR_FULLDPLX;
-+ printk("%s: Hard coding %d/%s\n", dev->name,
-+ (ecmd->speed == SPEED_100)? 100:10,
-+ (ecmd->duplex == DUPLEX_FULL)? "full":"half");
-+ }
-+ armiiwrite(np->phy, MII_BMCR, tmp);
-+ np->phyData = 0;
-+ return 0;
-+}
-+
-+static int netdev_ethtool_ioctl(struct net_device *dev, void *useraddr)
-+{
-+ struct ar2313_private *np = dev->priv;
-+ u32 cmd;
-+
-+ if (get_user(cmd, (u32 *)useraddr))
-+ return -EFAULT;
-+
-+ switch (cmd) {
-+ /* get settings */
-+ case ETHTOOL_GSET: {
-+ struct ethtool_cmd ecmd = { ETHTOOL_GSET };
-+ spin_lock_irq(&np->lock);
-+ netdev_get_ecmd(dev, &ecmd);
-+ spin_unlock_irq(&np->lock);
-+ if (copy_to_user(useraddr, &ecmd, sizeof(ecmd)))
-+ return -EFAULT;
-+ return 0;
-+ }
-+ /* set settings */
-+ case ETHTOOL_SSET: {
-+ struct ethtool_cmd ecmd;
-+ int r;
-+ if (copy_from_user(&ecmd, useraddr, sizeof(ecmd)))
-+ return -EFAULT;
-+ spin_lock_irq(&np->lock);
-+ r = netdev_set_ecmd(dev, &ecmd);
-+ spin_unlock_irq(&np->lock);
-+ return r;
-+ }
-+ /* restart autonegotiation */
-+ case ETHTOOL_NWAY_RST: {
-+ int tmp;
-+ int r = -EINVAL;
-+ /* if autoneg is off, it's an error */
-+ tmp = armiiread(np->phy, MII_BMCR);
-+ if (tmp & BMCR_ANENABLE) {
-+ tmp |= (BMCR_ANRESTART);
-+ armiiwrite(np->phy, MII_BMCR, tmp);
-+ r = 0;
-+ }
-+ return r;
-+ }
-+ /* get link status */
-+ case ETHTOOL_GLINK: {
-+ struct ethtool_value edata = {ETHTOOL_GLINK};
-+ edata.data = (armiiread(np->phy, MII_BMSR)&BMSR_LSTATUS) ? 1:0;
-+ if (copy_to_user(useraddr, &edata, sizeof(edata)))
-+ return -EFAULT;
-+ return 0;
-+ }
-+ }
-+
-+ return -EOPNOTSUPP;
-+}
-+
-+static int ar2313_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
-+{
-+ struct mii_ioctl_data *data = (struct mii_ioctl_data *)&ifr->ifr_data;
-+
-+ switch (cmd) {
-+ case SIOCDEVPRIVATE: {
-+ struct ar2313_cmd scmd;
-+
-+ if (copy_from_user(&scmd, ifr->ifr_data, sizeof(scmd)))
-+ return -EFAULT;
-+
-+#if DEBUG
-+ printk("%s: ioctl devprivate c=%d a=%x l=%d m=%d d=%x,%x\n",
-+ dev->name, scmd.cmd,
-+ scmd.address, scmd.length,
-+ scmd.mailbox, scmd.data[0], scmd.data[1]);
-+#endif /* DEBUG */
-+
-+ switch (scmd.cmd) {
-+ case AR2313_READ_DATA:
-+ if(scmd.length==4){
-+ scmd.data[0] = *((u32*)scmd.address);
-+ } else if(scmd.length==2) {
-+ scmd.data[0] = *((u16*)scmd.address);
-+ } else if (scmd.length==1) {
-+ scmd.data[0] = *((u8*)scmd.address);
-+ } else {
-+ return -EOPNOTSUPP;
-+ }
-+ if(copy_to_user(ifr->ifr_data, &scmd, sizeof(scmd)))
-+ return -EFAULT;
-+ break;
-+
-+ case AR2313_WRITE_DATA:
-+ if(scmd.length==4){
-+ *((u32*)scmd.address) = scmd.data[0];
-+ } else if(scmd.length==2) {
-+ *((u16*)scmd.address) = scmd.data[0];
-+ } else if (scmd.length==1) {
-+ *((u8*)scmd.address) = scmd.data[0];
-+ } else {
-+ return -EOPNOTSUPP;
-+ }
-+ break;
-+
-+ case AR2313_GET_VERSION:
-+ // SAMEER: sprintf((char*) &scmd, "%s", ARUBA_VERSION);
-+ if(copy_to_user(ifr->ifr_data, &scmd, sizeof(scmd)))
-+ return -EFAULT;
-+ break;
-+
-+ default:
-+ return -EOPNOTSUPP;
-+ }
-+ return 0;
-+ }
-+
-+ case SIOCETHTOOL:
-+ return netdev_ethtool_ioctl(dev, (void *) ifr->ifr_data);
-+
-+ case SIOCGMIIPHY: /* Get address of MII PHY in use. */
-+ data->phy_id = 1;
-+ /* Fall Through */
-+
-+ case SIOCGMIIREG: /* Read MII PHY register. */
-+ case SIOCDEVPRIVATE+1: /* for binary compat, remove in 2.5 */
-+ data->val_out = armiiread(data->phy_id & 0x1f,
-+ data->reg_num & 0x1f);
-+ return 0;
-+ case SIOCSMIIREG: /* Write MII PHY register. */
-+ case SIOCDEVPRIVATE+2: /* for binary compat, remove in 2.5 */
-+ if (!capable(CAP_NET_ADMIN))
-+ return -EPERM;
-+ armiiwrite(data->phy_id & 0x1f,
-+ data->reg_num & 0x1f, data->val_in);
-+ return 0;
-+
-+ case SIOCSIFHWADDR:
-+ if (copy_from_user(dev->dev_addr, ifr->ifr_data, sizeof(dev->dev_addr)))
-+ return -EFAULT;
-+ return 0;
-+
-+ case SIOCGIFHWADDR:
-+ if (copy_to_user(ifr->ifr_data, dev->dev_addr, sizeof(dev->dev_addr)))
-+ return -EFAULT;
-+ return 0;
-+
-+ default:
-+ break;
-+ }
-+
-+ return -EOPNOTSUPP;
-+}
-+
-+static struct net_device_stats *ar2313_get_stats(struct net_device *dev)
-+{
-+ struct ar2313_private *sp = dev->priv;
-+ return &sp->stats;
-+}
-+
-+static short
-+armiiread(short phy, short reg)
-+{
-+ volatile ETHERNET_STRUCT * ethernet;
-+
-+ ethernet = (volatile ETHERNET_STRUCT *)KSEG1ADDR(ar_eth_base); /* always MAC 0 */
-+ ethernet->mii_addr = ((reg << MII_ADDR_REG_SHIFT) |
-+ (phy << MII_ADDR_PHY_SHIFT));
-+ while (ethernet->mii_addr & MII_ADDR_BUSY);
-+ return (ethernet->mii_data >> MII_DATA_SHIFT);
-+}
-+
-+static void
-+armiiwrite(short phy, short reg, short data)
-+{
-+ volatile ETHERNET_STRUCT * ethernet;
-+
-+ ethernet = (volatile ETHERNET_STRUCT *)KSEG1ADDR(ar_eth_base); /* always MAC 0 */
-+ while (ethernet->mii_addr & MII_ADDR_BUSY);
-+ ethernet->mii_data = data << MII_DATA_SHIFT;
-+ ethernet->mii_addr = ((reg << MII_ADDR_REG_SHIFT) |
-+ (phy << MII_ADDR_PHY_SHIFT) |
-+ MII_ADDR_WRITE);
-+}
-+
-diff -urN linux.old/drivers/net/ar2313/ar2313.h linux.eth/drivers/net/ar2313/ar2313.h
---- linux.old/drivers/net/ar2313/ar2313.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux.eth/drivers/net/ar2313/ar2313.h 2006-12-16 04:30:11.000000000 +0100
-@@ -0,0 +1,191 @@
-+#ifndef _AR2313_H_
-+#define _AR2313_H_
-+
-+#include <linux/autoconf.h>
-+#include <asm/bootinfo.h>
-+#include "platform.h"
-+
-+extern unsigned long mips_machtype;
-+
-+#undef ETHERNET_BASE
-+#define ETHERNET_BASE ar_eth_base
-+#define ETHERNET_SIZE 0x00100000
-+#define ETHERNET_MACS 2
-+
-+#undef DMA_BASE
-+#define DMA_BASE ar_dma_base
-+#define DMA_SIZE 0x00100000
-+
-+
-+/*
-+ * probe link timer - 5 secs
-+ */
-+#define LINK_TIMER (5*HZ)
-+
-+/*
-+ * Interrupt register base address
-+ */
-+#define INTERRUPT_BASE PHYS_TO_K1(ar_int_base)
-+
-+/*
-+ * Reset Register
-+ */
-+#define AR531X_RESET (AR531X_RESETTMR + 0x0020)
-+#define RESET_SYSTEM 0x00000001 /* cold reset full system */
-+#define RESET_PROC 0x00000002 /* cold reset MIPS core */
-+#define RESET_WLAN0 0x00000004 /* cold reset WLAN MAC and BB */
-+#define RESET_EPHY0 0x00000008 /* cold reset ENET0 phy */
-+#define RESET_EPHY1 0x00000010 /* cold reset ENET1 phy */
-+#define RESET_ENET0 0x00000020 /* cold reset ENET0 mac */
-+#define RESET_ENET1 0x00000040 /* cold reset ENET1 mac */
-+
-+#define IS_DMA_TX_INT(X) (((X) & (DMA_STATUS_TI)) != 0)
-+#define IS_DMA_RX_INT(X) (((X) & (DMA_STATUS_RI)) != 0)
-+#define IS_DRIVER_OWNED(X) (((X) & (DMA_TX_OWN)) == 0)
-+
-+#ifndef K1_TO_PHYS
-+// hack
-+#define K1_TO_PHYS(x) (((unsigned int)(x)) & 0x1FFFFFFF) /* kseg1 to physical */
-+#endif
-+
-+#ifndef PHYS_TO_K1
-+// hack
-+#define PHYS_TO_K1(x) (((unsigned int)(x)) | 0xA0000000) /* physical to kseg1 */
-+#endif
-+
-+#define AR2313_TX_TIMEOUT (HZ/4)
-+
-+/*
-+ * Rings
-+ */
-+#define DSC_RING_ENTRIES_SIZE (AR2313_DESCR_ENTRIES * sizeof(struct desc))
-+#define DSC_NEXT(idx) ((idx + 1) & (AR2313_DESCR_ENTRIES - 1))
-+
-+static inline int tx_space (u32 csm, u32 prd)
-+{
-+ return (csm - prd - 1) & (AR2313_DESCR_ENTRIES - 1);
-+}
-+
-+#if MAX_SKB_FRAGS
-+#define TX_RESERVED (MAX_SKB_FRAGS+1) /* +1 for message header */
-+#define tx_ring_full(csm, prd) (tx_space(csm, prd) <= TX_RESERVED)
-+#else
-+#define tx_ring_full 0
-+#endif
-+
-+#define AR2313_MBGET 2
-+#define AR2313_MBSET 3
-+#define AR2313_PCI_RECONFIG 4
-+#define AR2313_PCI_DUMP 5
-+#define AR2313_TEST_PANIC 6
-+#define AR2313_TEST_NULLPTR 7
-+#define AR2313_READ_DATA 8
-+#define AR2313_WRITE_DATA 9
-+#define AR2313_GET_VERSION 10
-+#define AR2313_TEST_HANG 11
-+#define AR2313_SYNC 12
-+
-+
-+struct ar2313_cmd {
-+ u32 cmd;
-+ u32 address; /* virtual address of image */
-+ u32 length; /* size of image to download */
-+ u32 mailbox; /* mailbox to get/set */
-+ u32 data[2]; /* contents of mailbox to read/write */
-+};
-+
-+
-+/*
-+ * Struct private for the Sibyte.
-+ *
-+ * Elements are grouped so variables used by the tx handling goes
-+ * together, and will go into the same cache lines etc. in order to
-+ * avoid cache line contention between the rx and tx handling on SMP.
-+ *
-+ * Frequently accessed variables are put at the beginning of the
-+ * struct to help the compiler generate better/shorter code.
-+ */
-+struct ar2313_private
-+{
-+ struct net_device *dev;
-+ int version;
-+ u32 mb[2];
-+
-+ volatile ETHERNET_STRUCT *eth_regs;
-+ volatile DMA *dma_regs;
-+ volatile u32 *int_regs;
-+
-+ spinlock_t lock; /* Serialise access to device */
-+
-+ /*
-+ * RX and TX descriptors, must be adjacent
-+ */
-+ ar2313_descr_t *rx_ring;
-+ ar2313_descr_t *tx_ring;
-+
-+
-+ struct sk_buff **rx_skb;
-+ struct sk_buff **tx_skb;
-+
-+ /*
-+ * RX elements
-+ */
-+ u32 rx_skbprd;
-+ u32 cur_rx;
-+
-+ /*
-+ * TX elements
-+ */
-+ u32 tx_prd;
-+ u32 tx_csm;
-+
-+ /*
-+ * Misc elements
-+ */
-+ int board_idx;
-+ char name[48];
-+ struct net_device_stats stats;
-+ struct {
-+ u32 address;
-+ u32 length;
-+ char *mapping;
-+ } desc;
-+
-+
-+ struct timer_list link_timer;
-+ unsigned short phy; /* merlot phy = 1, samsung phy = 0x1f */
-+ unsigned short mac;
-+ unsigned short link; /* 0 - link down, 1 - link up */
-+ u16 phyData;
-+
-+ struct tasklet_struct rx_tasklet;
-+ int unloading;
-+};
-+
-+
-+/*
-+ * Prototypes
-+ */
-+static int ar2313_init(struct net_device *dev);
-+#ifdef TX_TIMEOUT
-+static void ar2313_tx_timeout(struct net_device *dev);
-+#endif
-+#if 0
-+static void ar2313_multicast_list(struct net_device *dev);
-+#endif
-+static int ar2313_restart(struct net_device *dev);
-+#if DEBUG
-+static void ar2313_dump_regs(struct net_device *dev);
-+#endif
-+static void ar2313_load_rx_ring(struct net_device *dev, int bufs);
-+static irqreturn_t ar2313_interrupt(int irq, void *dev_id);
-+static int ar2313_open(struct net_device *dev);
-+static int ar2313_start_xmit(struct sk_buff *skb, struct net_device *dev);
-+static int ar2313_close(struct net_device *dev);
-+static int ar2313_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd);
-+static void ar2313_init_cleanup(struct net_device *dev);
-+static int ar2313_setup_timer(struct net_device *dev);
-+static void ar2313_link_timer_fn(unsigned long data);
-+static void ar2313_check_link(struct net_device *dev);
-+static struct net_device_stats *ar2313_get_stats(struct net_device *dev);
-+#endif /* _AR2313_H_ */
-diff -urN linux.old/drivers/net/ar2313/ar2313_msg.h linux.eth/drivers/net/ar2313/ar2313_msg.h
---- linux.old/drivers/net/ar2313/ar2313_msg.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux.eth/drivers/net/ar2313/ar2313_msg.h 2006-12-16 04:30:11.000000000 +0100
-@@ -0,0 +1,17 @@
-+#ifndef _AR2313_MSG_H_
-+#define _AR2313_MSG_H_
-+
-+#define AR2313_MTU 1692
-+#define AR2313_PRIOS 1
-+#define AR2313_QUEUES (2*AR2313_PRIOS)
-+
-+#define AR2313_DESCR_ENTRIES 64
-+
-+typedef struct {
-+ volatile unsigned int status; // OWN, Device control and status.
-+ volatile unsigned int devcs; // pkt Control bits + Length
-+ volatile unsigned int addr; // Current Address.
-+ volatile unsigned int descr; // Next descriptor in chain.
-+} ar2313_descr_t;
-+
-+#endif /* _AR2313_MSG_H_ */
-diff -urN linux.old/drivers/net/ar2313/dma.h linux.eth/drivers/net/ar2313/dma.h
---- linux.old/drivers/net/ar2313/dma.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux.eth/drivers/net/ar2313/dma.h 2006-12-16 04:30:11.000000000 +0100
-@@ -0,0 +1,135 @@
-+#ifndef __ARUBA_DMA_H__
-+#define __ARUBA_DMA_H__
-+
-+/*******************************************************************************
-+ *
-+ * Copyright 2002 Integrated Device Technology, Inc.
-+ * All rights reserved.
-+ *
-+ * DMA register definition.
-+ *
-+ * File : $Id: dma.h,v 1.3 2002/06/06 18:34:03 astichte Exp $
-+ *
-+ * Author : ryan.holmQVist@idt.com
-+ * Date : 20011005
-+ * Update :
-+ * $Log: dma.h,v $
-+ * Revision 1.3 2002/06/06 18:34:03 astichte
-+ * Added XXX_PhysicalAddress and XXX_VirtualAddress
-+ *
-+ * Revision 1.2 2002/06/05 18:30:46 astichte
-+ * Removed IDTField
-+ *
-+ * Revision 1.1 2002/05/29 17:33:21 sysarch
-+ * jba File moved from vcode/include/idt/acacia
-+ *
-+ *
-+ ******************************************************************************/
-+
-+#define AR_BIT(x) (1 << (x))
-+#define DMA_RX_ERR_CRC AR_BIT(1)
-+#define DMA_RX_ERR_DRIB AR_BIT(2)
-+#define DMA_RX_ERR_MII AR_BIT(3)
-+#define DMA_RX_EV2 AR_BIT(5)
-+#define DMA_RX_ERR_COL AR_BIT(6)
-+#define DMA_RX_LONG AR_BIT(7)
-+#define DMA_RX_LS AR_BIT(8) /* last descriptor */
-+#define DMA_RX_FS AR_BIT(9) /* first descriptor */
-+#define DMA_RX_MF AR_BIT(10) /* multicast frame */
-+#define DMA_RX_ERR_RUNT AR_BIT(11) /* runt frame */
-+#define DMA_RX_ERR_LENGTH AR_BIT(12) /* length error */
-+#define DMA_RX_ERR_DESC AR_BIT(14) /* descriptor error */
-+#define DMA_RX_ERROR AR_BIT(15) /* error summary */
-+#define DMA_RX_LEN_MASK 0x3fff0000
-+#define DMA_RX_LEN_SHIFT 16
-+#define DMA_RX_FILT AR_BIT(30)
-+#define DMA_RX_OWN AR_BIT(31) /* desc owned by DMA controller */
-+
-+#define DMA_RX1_BSIZE_MASK 0x000007ff
-+#define DMA_RX1_BSIZE_SHIFT 0
-+#define DMA_RX1_CHAINED AR_BIT(24)
-+#define DMA_RX1_RER AR_BIT(25)
-+
-+#define DMA_TX_ERR_UNDER AR_BIT(1) /* underflow error */
-+#define DMA_TX_ERR_DEFER AR_BIT(2) /* excessive deferral */
-+#define DMA_TX_COL_MASK 0x78
-+#define DMA_TX_COL_SHIFT 3
-+#define DMA_TX_ERR_HB AR_BIT(7) /* hearbeat failure */
-+#define DMA_TX_ERR_COL AR_BIT(8) /* excessive collisions */
-+#define DMA_TX_ERR_LATE AR_BIT(9) /* late collision */
-+#define DMA_TX_ERR_LINK AR_BIT(10) /* no carrier */
-+#define DMA_TX_ERR_LOSS AR_BIT(11) /* loss of carrier */
-+#define DMA_TX_ERR_JABBER AR_BIT(14) /* transmit jabber timeout */
-+#define DMA_TX_ERROR AR_BIT(15) /* frame aborted */
-+#define DMA_TX_OWN AR_BIT(31) /* descr owned by DMA controller */
-+
-+#define DMA_TX1_BSIZE_MASK 0x000007ff
-+#define DMA_TX1_BSIZE_SHIFT 0
-+#define DMA_TX1_CHAINED AR_BIT(24) /* chained descriptors */
-+#define DMA_TX1_TER AR_BIT(25) /* transmit end of ring */
-+#define DMA_TX1_FS AR_BIT(29) /* first segment */
-+#define DMA_TX1_LS AR_BIT(30) /* last segment */
-+#define DMA_TX1_IC AR_BIT(31) /* interrupt on completion */
-+
-+#define RCVPKT_LENGTH(X) (X >> 16) /* Received pkt Length */
-+
-+#define MAC_CONTROL_RE AR_BIT(2) /* receive enable */
-+#define MAC_CONTROL_TE AR_BIT(3) /* transmit enable */
-+#define MAC_CONTROL_DC AR_BIT(5) /* Deferral check*/
-+#define MAC_CONTROL_ASTP AR_BIT(8) /* Auto pad strip */
-+#define MAC_CONTROL_DRTY AR_BIT(10) /* Disable retry */
-+#define MAC_CONTROL_DBF AR_BIT(11) /* Disable bcast frames */
-+#define MAC_CONTROL_LCC AR_BIT(12) /* late collision ctrl */
-+#define MAC_CONTROL_HP AR_BIT(13) /* Hash Perfect filtering */
-+#define MAC_CONTROL_HASH AR_BIT(14) /* Unicast hash filtering */
-+#define MAC_CONTROL_HO AR_BIT(15) /* Hash only filtering */
-+#define MAC_CONTROL_PB AR_BIT(16) /* Pass Bad frames */
-+#define MAC_CONTROL_IF AR_BIT(17) /* Inverse filtering */
-+#define MAC_CONTROL_PR AR_BIT(18) /* promiscuous mode (valid frames only) */
-+#define MAC_CONTROL_PM AR_BIT(19) /* pass multicast */
-+#define MAC_CONTROL_F AR_BIT(20) /* full-duplex */
-+#define MAC_CONTROL_DRO AR_BIT(23) /* Disable Receive Own */
-+#define MAC_CONTROL_HBD AR_BIT(28) /* heart-beat disabled (MUST BE SET) */
-+#define MAC_CONTROL_BLE AR_BIT(30) /* big endian mode */
-+#define MAC_CONTROL_RA AR_BIT(31) /* receive all (valid and invalid frames) */
-+
-+#define MII_ADDR_BUSY AR_BIT(0)
-+#define MII_ADDR_WRITE AR_BIT(1)
-+#define MII_ADDR_REG_SHIFT 6
-+#define MII_ADDR_PHY_SHIFT 11
-+#define MII_DATA_SHIFT 0
-+
-+#define FLOW_CONTROL_FCE AR_BIT(1)
-+
-+#define DMA_BUS_MODE_SWR AR_BIT(0) /* software reset */
-+#define DMA_BUS_MODE_BLE AR_BIT(7) /* big endian mode */
-+#define DMA_BUS_MODE_PBL_SHIFT 8 /* programmable burst length 32 */
-+#define DMA_BUS_MODE_DBO AR_BIT(20) /* big-endian descriptors */
-+
-+#define DMA_STATUS_TI AR_BIT(0) /* transmit interrupt */
-+#define DMA_STATUS_TPS AR_BIT(1) /* transmit process stopped */
-+#define DMA_STATUS_TU AR_BIT(2) /* transmit buffer unavailable */
-+#define DMA_STATUS_TJT AR_BIT(3) /* transmit buffer timeout */
-+#define DMA_STATUS_UNF AR_BIT(5) /* transmit underflow */
-+#define DMA_STATUS_RI AR_BIT(6) /* receive interrupt */
-+#define DMA_STATUS_RU AR_BIT(7) /* receive buffer unavailable */
-+#define DMA_STATUS_RPS AR_BIT(8) /* receive process stopped */
-+#define DMA_STATUS_ETI AR_BIT(10) /* early transmit interrupt */
-+#define DMA_STATUS_FBE AR_BIT(13) /* fatal bus interrupt */
-+#define DMA_STATUS_ERI AR_BIT(14) /* early receive interrupt */
-+#define DMA_STATUS_AIS AR_BIT(15) /* abnormal interrupt summary */
-+#define DMA_STATUS_NIS AR_BIT(16) /* normal interrupt summary */
-+#define DMA_STATUS_RS_SHIFT 17 /* receive process state */
-+#define DMA_STATUS_TS_SHIFT 20 /* transmit process state */
-+#define DMA_STATUS_EB_SHIFT 23 /* error bits */
-+
-+#define DMA_CONTROL_SR AR_BIT(1) /* start receive */
-+#define DMA_CONTROL_ST AR_BIT(13) /* start transmit */
-+#define DMA_CONTROL_SF AR_BIT(21) /* store and forward */
-+
-+#endif // __ARUBA_DMA_H__
-+
-+
-+
-+
-+
-diff -urN linux.old/drivers/net/ar2313/Makefile linux.eth/drivers/net/ar2313/Makefile
---- linux.old/drivers/net/ar2313/Makefile 1970-01-01 01:00:00.000000000 +0100
-+++ linux.eth/drivers/net/ar2313/Makefile 2006-12-16 04:30:11.000000000 +0100
-@@ -0,0 +1,5 @@
-+#
-+# Makefile for the AR2313 ethernet driver
-+#
-+
-+obj-$(CONFIG_AR2313) += ar2313.o
-diff -urN linux.old/drivers/net/ar2313/platform.h linux.eth/drivers/net/ar2313/platform.h
---- linux.old/drivers/net/ar2313/platform.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux.eth/drivers/net/ar2313/platform.h 2006-12-16 04:30:11.000000000 +0100
-@@ -0,0 +1,128 @@
-+/********************************************************************************
-+ Title: $Source: platform.h,v $
-+
-+ Author: Dan Steinberg
-+ Copyright Integrated Device Technology 2001
-+
-+ Purpose: AR2313 Register/Bit Definitions
-+
-+ Update:
-+ $Log: platform.h,v $
-+
-+ Notes: See Merlot architecture spec for complete details. Note, all
-+ addresses are virtual addresses in kseg1 (Uncached, Unmapped).
-+
-+********************************************************************************/
-+
-+#ifndef PLATFORM_H
-+#define PLATFORM_H
-+
-+#define BIT(x) (1 << (x))
-+
-+#define RESET_BASE 0xBC003020
-+#define RESET_VALUE 0x00000001
-+
-+/********************************************************************
-+ * Device controller
-+ ********************************************************************/
-+typedef struct {
-+ volatile unsigned int flash0;
-+} DEVICE;
-+
-+#define device (*((volatile DEVICE *) DEV_CTL_BASE))
-+
-+// DDRC register
-+#define DEV_WP (1<<26)
-+
-+/********************************************************************
-+ * DDR controller
-+ ********************************************************************/
-+typedef struct {
-+ volatile unsigned int ddrc0;
-+ volatile unsigned int ddrc1;
-+ volatile unsigned int ddrrefresh;
-+} DDR;
-+
-+#define ddr (*((volatile DDR *) DDR_BASE))
-+
-+// DDRC register
-+#define DDRC_CS(i) ((i&0x3)<<0)
-+#define DDRC_WE (1<<2)
-+
-+/********************************************************************
-+ * Ethernet interfaces
-+ ********************************************************************/
-+#define ETHERNET_BASE 0xB8200000
-+
-+//
-+// New Combo structure for Both Eth0 AND eth1
-+//
-+typedef struct {
-+ volatile unsigned int mac_control; /* 0x00 */
-+ volatile unsigned int mac_addr[2]; /* 0x04 - 0x08*/
-+ volatile unsigned int mcast_table[2]; /* 0x0c - 0x10 */
-+ volatile unsigned int mii_addr; /* 0x14 */
-+ volatile unsigned int mii_data; /* 0x18 */
-+ volatile unsigned int flow_control; /* 0x1c */
-+ volatile unsigned int vlan_tag; /* 0x20 */
-+ volatile unsigned int pad[7]; /* 0x24 - 0x3c */
-+ volatile unsigned int ucast_table[8]; /* 0x40-0x5c */
-+
-+} ETHERNET_STRUCT;
-+
-+/********************************************************************
-+ * Interrupt controller
-+ ********************************************************************/
-+
-+typedef struct {
-+ volatile unsigned int wdog_control; /* 0x08 */
-+ volatile unsigned int wdog_timer; /* 0x0c */
-+ volatile unsigned int misc_status; /* 0x10 */
-+ volatile unsigned int misc_mask; /* 0x14 */
-+ volatile unsigned int global_status; /* 0x18 */
-+ volatile unsigned int reserved; /* 0x1c */
-+ volatile unsigned int reset_control; /* 0x20 */
-+} INTERRUPT;
-+
-+#define interrupt (*((volatile INTERRUPT *) INTERRUPT_BASE))
-+
-+#define INTERRUPT_MISC_TIMER BIT(0)
-+#define INTERRUPT_MISC_AHBPROC BIT(1)
-+#define INTERRUPT_MISC_AHBDMA BIT(2)
-+#define INTERRUPT_MISC_GPIO BIT(3)
-+#define INTERRUPT_MISC_UART BIT(4)
-+#define INTERRUPT_MISC_UARTDMA BIT(5)
-+#define INTERRUPT_MISC_WATCHDOG BIT(6)
-+#define INTERRUPT_MISC_LOCAL BIT(7)
-+
-+#define INTERRUPT_GLOBAL_ETH BIT(2)
-+#define INTERRUPT_GLOBAL_WLAN BIT(3)
-+#define INTERRUPT_GLOBAL_MISC BIT(4)
-+#define INTERRUPT_GLOBAL_ITIMER BIT(5)
-+
-+/********************************************************************
-+ * DMA controller
-+ ********************************************************************/
-+#define DMA_BASE 0xB8201000
-+
-+typedef struct {
-+ volatile unsigned int bus_mode; /* 0x00 (CSR0) */
-+ volatile unsigned int xmt_poll; /* 0x04 (CSR1) */
-+ volatile unsigned int rcv_poll; /* 0x08 (CSR2) */
-+ volatile unsigned int rcv_base; /* 0x0c (CSR3) */
-+ volatile unsigned int xmt_base; /* 0x10 (CSR4) */
-+ volatile unsigned int status; /* 0x14 (CSR5) */
-+ volatile unsigned int control; /* 0x18 (CSR6) */
-+ volatile unsigned int intr_ena; /* 0x1c (CSR7) */
-+ volatile unsigned int rcv_missed; /* 0x20 (CSR8) */
-+ volatile unsigned int reserved[11]; /* 0x24-0x4c (CSR9-19) */
-+ volatile unsigned int cur_tx_buf_addr; /* 0x50 (CSR20) */
-+ volatile unsigned int cur_rx_buf_addr; /* 0x50 (CSR21) */
-+} DMA;
-+
-+#define dma (*((volatile DMA *) DMA_BASE))
-+
-+// macro to convert from virtual to physical address
-+#define phys_addr(x) (x & 0x1fffffff)
-+
-+#endif /* PLATFORM_H */
diff -urN linux.old/drivers/net/Kconfig linux.eth/drivers/net/Kconfig
--- linux.old/drivers/net/Kconfig 2006-12-14 23:53:29.000000000 +0100
+++ linux.eth/drivers/net/Kconfig 2006-12-16 04:30:11.000000000 +0100
-@@ -313,6 +313,12 @@
+@@ -324,6 +324,12 @@
source "drivers/net/arm/Kconfig"
+config AR2313
+ tristate "AR2313 Ethernet support"
-+ depends on NET_ETHERNET && AR531X
++ depends on NET_ETHERNET && ATHEROS
+ help
+ Support for the AR231x/531x ethernet controller
+
diff -urN linux.old/drivers/net/Makefile linux.eth/drivers/net/Makefile
--- linux.old/drivers/net/Makefile 2006-12-14 23:53:29.000000000 +0100
+++ linux.eth/drivers/net/Makefile 2006-12-16 04:30:11.000000000 +0100
-@@ -9,6 +9,7 @@
- obj-$(CONFIG_EHEA) += ehea/
+@@ -11,6 +11,7 @@
obj-$(CONFIG_BONDING) += bonding/
+ obj-$(CONFIG_ATL1) += atl1/
obj-$(CONFIG_GIANFAR) += gianfar_driver.o
+obj-$(CONFIG_AR2313) += ar2313/
projects / openwrt.git / blobdiff