-diff -urN linux.old/Makefile linux.dev/Makefile
---- linux.old/Makefile 2005-10-21 16:43:16.316951500 +0200
-+++ linux.dev/Makefile 2005-11-10 01:10:45.771570000 +0100
-@@ -91,7 +91,7 @@
-
- CPPFLAGS := -D__KERNEL__ -I$(HPATH)
-
--CFLAGS := $(CPPFLAGS) -Wall -Wstrict-prototypes -Wno-trigraphs -O2 \
-+CFLAGS := $(CPPFLAGS) -Wall -Wstrict-prototypes -Wno-trigraphs -Os \
- -fno-strict-aliasing -fno-common
- ifndef CONFIG_FRAME_POINTER
- CFLAGS += -fomit-frame-pointer
diff -urN linux.old/arch/mips/Makefile linux.dev/arch/mips/Makefile
--- linux.old/arch/mips/Makefile 2005-10-21 16:43:16.316951500 +0200
+++ linux.dev/arch/mips/Makefile 2005-11-10 01:10:45.775570250 +0100
cval = cflag & (CSIZE | CSTOPB);
#if defined(__powerpc__) || defined(__alpha__)
cval >>= 8;
-diff -urN linux.old/drivers/char/serial.c.orig linux.dev/drivers/char/serial.c.orig
---- linux.old/drivers/char/serial.c.orig 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/drivers/char/serial.c.orig 2005-11-10 01:10:46.051587500 +0100
-@@ -0,0 +1,6054 @@
-+/*
-+ * linux/drivers/char/serial.c
-+ *
-+ * Copyright (C) 1991, 1992 Linus Torvalds
-+ * Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997,
-+ * 1998, 1999 Theodore Ts'o
-+ *
-+ * Extensively rewritten by Theodore Ts'o, 8/16/92 -- 9/14/92. Now
-+ * much more extensible to support other serial cards based on the
-+ * 16450/16550A UART's. Added support for the AST FourPort and the
-+ * Accent Async board.
-+ *
-+ * set_serial_info fixed to set the flags, custom divisor, and uart
-+ * type fields. Fix suggested by Michael K. Johnson 12/12/92.
-+ *
-+ * 11/95: TIOCMIWAIT, TIOCGICOUNT by Angelo Haritsis <ah@doc.ic.ac.uk>
-+ *
-+ * 03/96: Modularised by Angelo Haritsis <ah@doc.ic.ac.uk>
-+ *
-+ * rs_set_termios fixed to look also for changes of the input
-+ * flags INPCK, BRKINT, PARMRK, IGNPAR and IGNBRK.
-+ * Bernd Anhäupl 05/17/96.
-+ *
-+ * 1/97: Extended dumb serial ports are a config option now.
-+ * Saves 4k. Michael A. Griffith <grif@acm.org>
-+ *
-+ * 8/97: Fix bug in rs_set_termios with RTS
-+ * Stanislav V. Voronyi <stas@uanet.kharkov.ua>
-+ *
-+ * 3/98: Change the IRQ detection, use of probe_irq_o*(),
-+ * suppress TIOCSERGWILD and TIOCSERSWILD
-+ * Etienne Lorrain <etienne.lorrain@ibm.net>
-+ *
-+ * 4/98: Added changes to support the ARM architecture proposed by
-+ * Russell King
-+ *
-+ * 5/99: Updated to include support for the XR16C850 and ST16C654
-+ * uarts. Stuart MacDonald <stuartm@connecttech.com>
-+ *
-+ * 8/99: Generalized PCI support added. Theodore Ts'o
-+ *
-+ * 3/00: Rid circular buffer of redundant xmit_cnt. Fix a
-+ * few races on freeing buffers too.
-+ * Alan Modra <alan@linuxcare.com>
-+ *
-+ * 5/00: Support for the RSA-DV II/S card added.
-+ * Kiyokazu SUTO <suto@ks-and-ks.ne.jp>
-+ *
-+ * 6/00: Remove old-style timer, use timer_list
-+ * Andrew Morton <andrewm@uow.edu.au>
-+ *
-+ * 7/00: Support Timedia/Sunix/Exsys PCI cards
-+ *
-+ * 7/00: fix some returns on failure not using MOD_DEC_USE_COUNT.
-+ * Arnaldo Carvalho de Melo <acme@conectiva.com.br>
-+ *
-+ * 10/00: add in optional software flow control for serial console.
-+ * Kanoj Sarcar <kanoj@sgi.com> (Modified by Theodore Ts'o)
-+ *
-+ * 02/02: Fix for AMD Elan bug in transmit irq routine, by
-+ * Christer Weinigel <wingel@hog.ctrl-c.liu.se>,
-+ * Robert Schwebel <robert@schwebel.de>,
-+ * Juergen Beisert <jbeisert@eurodsn.de>,
-+ * Theodore Ts'o <tytso@mit.edu>
-+ *
-+ * 10/00: Added suport for MIPS Atlas board.
-+ * 11/00: Hooks for serial kernel debug port support added.
-+ * Kevin D. Kissell, kevink@mips.com and Carsten Langgaard,
-+ * carstenl@mips.com
-+ * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
-+ */
-+
-+static char *serial_version = "5.05c";
-+static char *serial_revdate = "2001-07-08";
-+
-+/*
-+ * Serial driver configuration section. Here are the various options:
-+ *
-+ * CONFIG_HUB6
-+ * Enables support for the venerable Bell Technologies
-+ * HUB6 card.
-+ *
-+ * CONFIG_SERIAL_MANY_PORTS
-+ * Enables support for ports beyond the standard, stupid
-+ * COM 1/2/3/4.
-+ *
-+ * CONFIG_SERIAL_MULTIPORT
-+ * Enables support for special multiport board support.
-+ *
-+ * CONFIG_SERIAL_SHARE_IRQ
-+ * Enables support for multiple serial ports on one IRQ
-+ *
-+ * CONFIG_SERIAL_DETECT_IRQ
-+ * Enable the autodetection of IRQ on standart ports
-+ *
-+ * SERIAL_PARANOIA_CHECK
-+ * Check the magic number for the async_structure where
-+ * ever possible.
-+ *
-+ * CONFIG_SERIAL_ACPI
-+ * Enable support for serial console port and serial
-+ * debug port as defined by the SPCR and DBGP tables in
-+ * ACPI 2.0.
-+ */
-+
-+#include <linux/config.h>
-+#include <linux/version.h>
-+
-+#undef SERIAL_PARANOIA_CHECK
-+#define CONFIG_SERIAL_NOPAUSE_IO
-+#define SERIAL_DO_RESTART
-+
-+#if 0
-+/* These defines are normally controlled by the autoconf.h */
-+#define CONFIG_SERIAL_MANY_PORTS
-+#define CONFIG_SERIAL_SHARE_IRQ
-+#define CONFIG_SERIAL_DETECT_IRQ
-+#define CONFIG_SERIAL_MULTIPORT
-+#define CONFIG_HUB6
-+#endif
-+
-+#ifdef CONFIG_PCI
-+#define ENABLE_SERIAL_PCI
-+#ifndef CONFIG_SERIAL_SHARE_IRQ
-+#define CONFIG_SERIAL_SHARE_IRQ
-+#endif
-+#ifndef CONFIG_SERIAL_MANY_PORTS
-+#define CONFIG_SERIAL_MANY_PORTS
-+#endif
-+#endif
-+
-+#ifdef CONFIG_SERIAL_ACPI
-+#define ENABLE_SERIAL_ACPI
-+#endif
-+
-+#if defined(CONFIG_ISAPNP)|| (defined(CONFIG_ISAPNP_MODULE) && defined(MODULE))
-+#ifndef ENABLE_SERIAL_PNP
-+#define ENABLE_SERIAL_PNP
-+#endif
-+#endif
-+
-+/* Set of debugging defines */
-+
-+#undef SERIAL_DEBUG_INTR
-+#undef SERIAL_DEBUG_OPEN
-+#undef SERIAL_DEBUG_FLOW
-+#undef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
-+#undef SERIAL_DEBUG_PCI
-+#undef SERIAL_DEBUG_AUTOCONF
-+
-+/* Sanity checks */
-+
-+#ifdef CONFIG_SERIAL_MULTIPORT
-+#ifndef CONFIG_SERIAL_SHARE_IRQ
-+#define CONFIG_SERIAL_SHARE_IRQ
-+#endif
-+#endif
-+
-+#ifdef CONFIG_HUB6
-+#ifndef CONFIG_SERIAL_MANY_PORTS
-+#define CONFIG_SERIAL_MANY_PORTS
-+#endif
-+#ifndef CONFIG_SERIAL_SHARE_IRQ
-+#define CONFIG_SERIAL_SHARE_IRQ
-+#endif
-+#endif
-+
-+#ifdef MODULE
-+#undef CONFIG_SERIAL_CONSOLE
-+#endif
-+
-+#define CONFIG_SERIAL_RSA
-+
-+#define RS_STROBE_TIME (10*HZ)
-+#define RS_ISR_PASS_LIMIT 256
-+
-+#if defined(__i386__) && (defined(CONFIG_M386) || defined(CONFIG_M486))
-+#define SERIAL_INLINE
-+#endif
-+
-+/*
-+ * End of serial driver configuration section.
-+ */
-+
-+#include <linux/module.h>
-+
-+#include <linux/types.h>
-+#ifdef LOCAL_HEADERS
-+#include "serial_local.h"
-+#else
-+#include <linux/serial.h>
-+#include <linux/serialP.h>
-+#include <linux/serial_reg.h>
-+#include <asm/serial.h>
-+#define LOCAL_VERSTRING ""
-+#endif
-+
-+#include <linux/errno.h>
-+#include <linux/signal.h>
-+#include <linux/sched.h>
-+#include <linux/timer.h>
-+#include <linux/interrupt.h>
-+#include <linux/tty.h>
-+#include <linux/tty_flip.h>
-+#include <linux/major.h>
-+#include <linux/string.h>
-+#include <linux/fcntl.h>
-+#include <linux/ptrace.h>
-+#include <linux/ioport.h>
-+#include <linux/mm.h>
-+#include <linux/slab.h>
-+#if (LINUX_VERSION_CODE >= 131343)
-+#include <linux/init.h>
-+#endif
-+#if (LINUX_VERSION_CODE >= 131336)
-+#include <asm/uaccess.h>
-+#endif
-+#include <linux/delay.h>
-+#ifdef CONFIG_SERIAL_CONSOLE
-+#include <linux/console.h>
-+#endif
-+#ifdef ENABLE_SERIAL_PCI
-+#include <linux/pci.h>
-+#endif
-+#ifdef ENABLE_SERIAL_PNP
-+#include <linux/isapnp.h>
-+#endif
-+#ifdef CONFIG_MAGIC_SYSRQ
-+#include <linux/sysrq.h>
-+#endif
-+
-+/*
-+ * All of the compatibilty code so we can compile serial.c against
-+ * older kernels is hidden in serial_compat.h
-+ */
-+#if defined(LOCAL_HEADERS) || (LINUX_VERSION_CODE < 0x020317) /* 2.3.23 */
-+#include "serial_compat.h"
-+#endif
-+
-+#include <asm/system.h>
-+#include <asm/io.h>
-+#include <asm/irq.h>
-+#include <asm/bitops.h>
-+
-+#if defined(CONFIG_MAC_SERIAL)
-+#define SERIAL_DEV_OFFSET ((_machine == _MACH_prep || _machine == _MACH_chrp) ? 0 : 2)
-+#else
-+#define SERIAL_DEV_OFFSET 0
-+#endif
-+
-+#ifdef SERIAL_INLINE
-+#define _INLINE_ inline
-+#else
-+#define _INLINE_
-+#endif
-+
-+static char *serial_name = "Serial driver";
-+
-+static DECLARE_TASK_QUEUE(tq_serial);
-+
-+static struct tty_driver serial_driver, callout_driver;
-+static int serial_refcount;
-+
-+static struct timer_list serial_timer;
-+
-+/* serial subtype definitions */
-+#ifndef SERIAL_TYPE_NORMAL
-+#define SERIAL_TYPE_NORMAL 1
-+#define SERIAL_TYPE_CALLOUT 2
-+#endif
-+
-+/* number of characters left in xmit buffer before we ask for more */
-+#define WAKEUP_CHARS 256
-+
-+/*
-+ * IRQ_timeout - How long the timeout should be for each IRQ
-+ * should be after the IRQ has been active.
-+ */
-+
-+static struct async_struct *IRQ_ports[NR_IRQS];
-+#ifdef CONFIG_SERIAL_MULTIPORT
-+static struct rs_multiport_struct rs_multiport[NR_IRQS];
-+#endif
-+static int IRQ_timeout[NR_IRQS];
-+#ifdef CONFIG_SERIAL_CONSOLE
-+static struct console sercons;
-+static int lsr_break_flag;
-+#endif
-+#if defined(CONFIG_SERIAL_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
-+static unsigned long break_pressed; /* break, really ... */
-+#endif
-+
-+static unsigned detect_uart_irq (struct serial_state * state);
-+static void autoconfig(struct serial_state * state);
-+static void change_speed(struct async_struct *info, struct termios *old);
-+static void rs_wait_until_sent(struct tty_struct *tty, int timeout);
-+
-+/*
-+ * Here we define the default xmit fifo size used for each type of
-+ * UART
-+ */
-+static struct serial_uart_config uart_config[] = {
-+ { "unknown", 1, 0 },
-+ { "8250", 1, 0 },
-+ { "16450", 1, 0 },
-+ { "16550", 1, 0 },
-+ { "16550A", 16, UART_CLEAR_FIFO | UART_USE_FIFO },
-+ { "cirrus", 1, 0 }, /* usurped by cyclades.c */
-+ { "ST16650", 1, UART_CLEAR_FIFO | UART_STARTECH },
-+ { "ST16650V2", 32, UART_CLEAR_FIFO | UART_USE_FIFO |
-+ UART_STARTECH },
-+ { "TI16750", 64, UART_CLEAR_FIFO | UART_USE_FIFO},
-+ { "Startech", 1, 0}, /* usurped by cyclades.c */
-+ { "16C950/954", 128, UART_CLEAR_FIFO | UART_USE_FIFO},
-+ { "ST16654", 64, UART_CLEAR_FIFO | UART_USE_FIFO |
-+ UART_STARTECH },
-+ { "XR16850", 128, UART_CLEAR_FIFO | UART_USE_FIFO |
-+ UART_STARTECH },
-+ { "RSA", 2048, UART_CLEAR_FIFO | UART_USE_FIFO },
-+ { 0, 0}
-+};
-+
-+#if defined(CONFIG_SERIAL_RSA) && defined(MODULE)
-+
-+#define PORT_RSA_MAX 4
-+static int probe_rsa[PORT_RSA_MAX];
-+static int force_rsa[PORT_RSA_MAX];
-+
-+MODULE_PARM(probe_rsa, "1-" __MODULE_STRING(PORT_RSA_MAX) "i");
-+MODULE_PARM_DESC(probe_rsa, "Probe I/O ports for RSA");
-+MODULE_PARM(force_rsa, "1-" __MODULE_STRING(PORT_RSA_MAX) "i");
-+MODULE_PARM_DESC(force_rsa, "Force I/O ports for RSA");
-+#endif /* CONFIG_SERIAL_RSA */
-+
-+struct serial_state rs_table[RS_TABLE_SIZE] = {
-+ SERIAL_PORT_DFNS /* Defined in serial.h */
-+};
-+
-+#define NR_PORTS (sizeof(rs_table)/sizeof(struct serial_state))
-+int serial_nr_ports = NR_PORTS;
-+
-+#if (defined(ENABLE_SERIAL_PCI) || defined(ENABLE_SERIAL_PNP))
-+#define NR_PCI_BOARDS 8
-+
-+static struct pci_board_inst serial_pci_board[NR_PCI_BOARDS];
-+
-+#ifndef IS_PCI_REGION_IOPORT
-+#define IS_PCI_REGION_IOPORT(dev, r) (pci_resource_flags((dev), (r)) & \
-+ IORESOURCE_IO)
-+#endif
-+#ifndef IS_PCI_REGION_IOMEM
-+#define IS_PCI_REGION_IOMEM(dev, r) (pci_resource_flags((dev), (r)) & \
-+ IORESOURCE_MEM)
-+#endif
-+#ifndef PCI_IRQ_RESOURCE
-+#define PCI_IRQ_RESOURCE(dev, r) ((dev)->irq_resource[r].start)
-+#endif
-+#ifndef pci_get_subvendor
-+#define pci_get_subvendor(dev) ((dev)->subsystem_vendor)
-+#define pci_get_subdevice(dev) ((dev)->subsystem_device)
-+#endif
-+#endif /* ENABLE_SERIAL_PCI || ENABLE_SERIAL_PNP */
-+
-+#ifndef PREPARE_FUNC
-+#define PREPARE_FUNC(dev) (dev->prepare)
-+#define ACTIVATE_FUNC(dev) (dev->activate)
-+#define DEACTIVATE_FUNC(dev) (dev->deactivate)
-+#endif
-+
-+#define HIGH_BITS_OFFSET ((sizeof(long)-sizeof(int))*8)
-+
-+static struct tty_struct *serial_table[NR_PORTS];
-+static struct termios *serial_termios[NR_PORTS];
-+static struct termios *serial_termios_locked[NR_PORTS];
-+
-+
-+#if defined(MODULE) && defined(SERIAL_DEBUG_MCOUNT)
-+#define DBG_CNT(s) printk("(%s): [%x] refc=%d, serc=%d, ttyc=%d -> %s\n", \
-+ kdevname(tty->device), (info->flags), serial_refcount,info->count,tty->count,s)
-+#else
-+#define DBG_CNT(s)
-+#endif
-+
-+/*
-+ * tmp_buf is used as a temporary buffer by serial_write. We need to
-+ * lock it in case the copy_from_user blocks while swapping in a page,
-+ * and some other program tries to do a serial write at the same time.
-+ * Since the lock will only come under contention when the system is
-+ * swapping and available memory is low, it makes sense to share one
-+ * buffer across all the serial ports, since it significantly saves
-+ * memory if large numbers of serial ports are open.
-+ */
-+static unsigned char *tmp_buf;
-+#ifdef DECLARE_MUTEX
-+static DECLARE_MUTEX(tmp_buf_sem);
-+#else
-+static struct semaphore tmp_buf_sem = MUTEX;
-+#endif
-+
-+
-+static inline int serial_paranoia_check(struct async_struct *info,
-+ kdev_t device, const char *routine)
-+{
-+#ifdef SERIAL_PARANOIA_CHECK
-+ static const char *badmagic =
-+ "Warning: bad magic number for serial struct (%s) in %s\n";
-+ static const char *badinfo =
-+ "Warning: null async_struct for (%s) in %s\n";
-+
-+ if (!info) {
-+ printk(badinfo, kdevname(device), routine);
-+ return 1;
-+ }
-+ if (info->magic != SERIAL_MAGIC) {
-+ printk(badmagic, kdevname(device), routine);
-+ return 1;
-+ }
-+#endif
-+ return 0;
-+}
-+
-+#if defined(CONFIG_MIPS_ATLAS) || defined(CONFIG_MIPS_SEAD)
-+
-+#include <asm/mips-boards/atlas.h>
-+
-+static _INLINE_ unsigned int serial_in(struct async_struct *info, int offset)
-+{
-+ return (*(volatile unsigned int *)(mips_io_port_base + ATLAS_UART_REGS_BASE + offset*8) & 0xff);
-+}
-+
-+static _INLINE_ void serial_out(struct async_struct *info, int offset, int value)
-+{
-+ *(volatile unsigned int *)(mips_io_port_base + ATLAS_UART_REGS_BASE + offset*8) = value;
-+}
-+
-+#else
-+
-+static _INLINE_ unsigned int serial_in(struct async_struct *info, int offset)
-+{
-+ switch (info->io_type) {
-+#ifdef CONFIG_HUB6
-+ case SERIAL_IO_HUB6:
-+ outb(info->hub6 - 1 + offset, info->port);
-+ return inb(info->port+1);
-+#endif
-+ case SERIAL_IO_MEM:
-+ return readb((unsigned long) info->iomem_base +
-+ (offset<<info->iomem_reg_shift));
-+ default:
-+ return inb(info->port + offset);
-+ }
-+}
-+
-+static _INLINE_ void serial_out(struct async_struct *info, int offset,
-+ int value)
-+{
-+ switch (info->io_type) {
-+#ifdef CONFIG_HUB6
-+ case SERIAL_IO_HUB6:
-+ outb(info->hub6 - 1 + offset, info->port);
-+ outb(value, info->port+1);
-+ break;
-+#endif
-+ case SERIAL_IO_MEM:
-+ writeb(value, (unsigned long) info->iomem_base +
-+ (offset<<info->iomem_reg_shift));
-+ break;
-+ default:
-+ outb(value, info->port+offset);
-+ }
-+}
-+#endif
-+
-+
-+/*
-+ * We used to support using pause I/O for certain machines. We
-+ * haven't supported this for a while, but just in case it's badly
-+ * needed for certain old 386 machines, I've left these #define's
-+ * in....
-+ */
-+#define serial_inp(info, offset) serial_in(info, offset)
-+#define serial_outp(info, offset, value) serial_out(info, offset, value)
-+
-+
-+/*
-+ * For the 16C950
-+ */
-+void serial_icr_write(struct async_struct *info, int offset, int value)
-+{
-+ serial_out(info, UART_SCR, offset);
-+ serial_out(info, UART_ICR, value);
-+}
-+
-+unsigned int serial_icr_read(struct async_struct *info, int offset)
-+{
-+ int value;
-+
-+ serial_icr_write(info, UART_ACR, info->ACR | UART_ACR_ICRRD);
-+ serial_out(info, UART_SCR, offset);
-+ value = serial_in(info, UART_ICR);
-+ serial_icr_write(info, UART_ACR, info->ACR);
-+ return value;
-+}
-+
-+/*
-+ * ------------------------------------------------------------
-+ * rs_stop() and rs_start()
-+ *
-+ * This routines are called before setting or resetting tty->stopped.
-+ * They enable or disable transmitter interrupts, as necessary.
-+ * ------------------------------------------------------------
-+ */
-+static void rs_stop(struct tty_struct *tty)
-+{
-+ struct async_struct *info = (struct async_struct *)tty->driver_data;
-+ unsigned long flags;
-+
-+ if (serial_paranoia_check(info, tty->device, "rs_stop"))
-+ return;
-+
-+ save_flags(flags); cli();
-+ if (info->IER & UART_IER_THRI) {
-+ info->IER &= ~UART_IER_THRI;
-+ serial_out(info, UART_IER, info->IER);
-+ }
-+ if (info->state->type == PORT_16C950) {
-+ info->ACR |= UART_ACR_TXDIS;
-+ serial_icr_write(info, UART_ACR, info->ACR);
-+ }
-+ restore_flags(flags);
-+}
-+
-+static void rs_start(struct tty_struct *tty)
-+{
-+ struct async_struct *info = (struct async_struct *)tty->driver_data;
-+ unsigned long flags;
-+
-+ if (serial_paranoia_check(info, tty->device, "rs_start"))
-+ return;
-+
-+ save_flags(flags); cli();
-+ if (info->xmit.head != info->xmit.tail
-+ && info->xmit.buf
-+ && !(info->IER & UART_IER_THRI)) {
-+ info->IER |= UART_IER_THRI;
-+ serial_out(info, UART_IER, info->IER);
-+ }
-+ if (info->state->type == PORT_16C950) {
-+ info->ACR &= ~UART_ACR_TXDIS;
-+ serial_icr_write(info, UART_ACR, info->ACR);
-+ }
-+ restore_flags(flags);
-+}
-+
-+/*
-+ * ----------------------------------------------------------------------
-+ *
-+ * Here starts the interrupt handling routines. All of the following
-+ * subroutines are declared as inline and are folded into
-+ * rs_interrupt(). They were separated out for readability's sake.
-+ *
-+ * Note: rs_interrupt() is a "fast" interrupt, which means that it
-+ * runs with interrupts turned off. People who may want to modify
-+ * rs_interrupt() should try to keep the interrupt handler as fast as
-+ * possible. After you are done making modifications, it is not a bad
-+ * idea to do:
-+ *
-+ * gcc -S -DKERNEL -Wall -Wstrict-prototypes -O6 -fomit-frame-pointer serial.c
-+ *
-+ * and look at the resulting assemble code in serial.s.
-+ *
-+ * - Ted Ts'o (tytso@mit.edu), 7-Mar-93
-+ * -----------------------------------------------------------------------
-+ */
-+
-+/*
-+ * This routine is used by the interrupt handler to schedule
-+ * processing in the software interrupt portion of the driver.
-+ */
-+static _INLINE_ void rs_sched_event(struct async_struct *info,
-+ int event)
-+{
-+ info->event |= 1 << event;
-+ queue_task(&info->tqueue, &tq_serial);
-+ mark_bh(SERIAL_BH);
-+}
-+
-+static _INLINE_ void receive_chars(struct async_struct *info,
-+ int *status, struct pt_regs * regs)
-+{
-+ struct tty_struct *tty = info->tty;
-+ unsigned char ch;
-+ struct async_icount *icount;
-+ int max_count = 256;
-+
-+ icount = &info->state->icount;
-+ do {
-+ if (tty->flip.count >= TTY_FLIPBUF_SIZE) {
-+ tty->flip.tqueue.routine((void *) tty);
-+ if (tty->flip.count >= TTY_FLIPBUF_SIZE) {
-+ /* no room in flip buffer, discard rx FIFO contents to clear IRQ
-+ * *FIXME* Hardware with auto flow control
-+ * would benefit from leaving the data in the FIFO and
-+ * disabling the rx IRQ until space becomes available.
-+ */
-+ do {
-+ serial_inp(info, UART_RX);
-+ icount->overrun++;
-+ *status = serial_inp(info, UART_LSR);
-+ } while ((*status & UART_LSR_DR) && (max_count-- > 0));
-+ return; // if TTY_DONT_FLIP is set
-+ }
-+ }
-+ ch = serial_inp(info, UART_RX);
-+ *tty->flip.char_buf_ptr = ch;
-+ icount->rx++;
-+
-+#ifdef SERIAL_DEBUG_INTR
-+ printk("DR%02x:%02x...", ch, *status);
-+#endif
-+ *tty->flip.flag_buf_ptr = 0;
-+ if (*status & (UART_LSR_BI | UART_LSR_PE |
-+ UART_LSR_FE | UART_LSR_OE)) {
-+ /*
-+ * For statistics only
-+ */
-+ if (*status & UART_LSR_BI) {
-+ *status &= ~(UART_LSR_FE | UART_LSR_PE);
-+ icount->brk++;
-+ /*
-+ * We do the SysRQ and SAK checking
-+ * here because otherwise the break
-+ * may get masked by ignore_status_mask
-+ * or read_status_mask.
-+ */
-+#if defined(CONFIG_SERIAL_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
-+ if (info->line == sercons.index) {
-+ if (!break_pressed) {
-+ break_pressed = jiffies;
-+ goto ignore_char;
-+ }
-+ break_pressed = 0;
-+ }
-+#endif
-+ if (info->flags & ASYNC_SAK)
-+ do_SAK(tty);
-+ } else if (*status & UART_LSR_PE)
-+ icount->parity++;
-+ else if (*status & UART_LSR_FE)
-+ icount->frame++;
-+ if (*status & UART_LSR_OE)
-+ icount->overrun++;
-+
-+ /*
-+ * Mask off conditions which should be ignored.
-+ */
-+ *status &= info->read_status_mask;
-+
-+#ifdef CONFIG_SERIAL_CONSOLE
-+ if (info->line == sercons.index) {
-+ /* Recover the break flag from console xmit */
-+ *status |= lsr_break_flag;
-+ lsr_break_flag = 0;
-+ }
-+#endif
-+ if (*status & (UART_LSR_BI)) {
-+#ifdef SERIAL_DEBUG_INTR
-+ printk("handling break....");
-+#endif
-+ *tty->flip.flag_buf_ptr = TTY_BREAK;
-+ } else if (*status & UART_LSR_PE)
-+ *tty->flip.flag_buf_ptr = TTY_PARITY;
-+ else if (*status & UART_LSR_FE)
-+ *tty->flip.flag_buf_ptr = TTY_FRAME;
-+ }
-+#if defined(CONFIG_SERIAL_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
-+ if (break_pressed && info->line == sercons.index) {
-+ if (ch != 0 &&
-+ time_before(jiffies, break_pressed + HZ*5)) {
-+ handle_sysrq(ch, regs, NULL, NULL);
-+ break_pressed = 0;
-+ goto ignore_char;
-+ }
-+ break_pressed = 0;
-+ }
-+#endif
-+ if ((*status & info->ignore_status_mask) == 0) {
-+ tty->flip.flag_buf_ptr++;
-+ tty->flip.char_buf_ptr++;
-+ tty->flip.count++;
-+ }
-+ if ((*status & UART_LSR_OE) &&
-+ (tty->flip.count < TTY_FLIPBUF_SIZE)) {
-+ /*
-+ * Overrun is special, since it's reported
-+ * immediately, and doesn't affect the current
-+ * character
-+ */
-+ *tty->flip.flag_buf_ptr = TTY_OVERRUN;
-+ tty->flip.count++;
-+ tty->flip.flag_buf_ptr++;
-+ tty->flip.char_buf_ptr++;
-+ }
-+#if defined(CONFIG_SERIAL_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
-+ ignore_char:
-+#endif
-+ *status = serial_inp(info, UART_LSR);
-+ } while ((*status & UART_LSR_DR) && (max_count-- > 0));
-+#if (LINUX_VERSION_CODE > 131394) /* 2.1.66 */
-+ tty_flip_buffer_push(tty);
-+#else
-+ queue_task_irq_off(&tty->flip.tqueue, &tq_timer);
-+#endif
-+}
-+
-+static _INLINE_ void transmit_chars(struct async_struct *info, int *intr_done)
-+{
-+ int count;
-+
-+ if (info->x_char) {
-+ serial_outp(info, UART_TX, info->x_char);
-+ info->state->icount.tx++;
-+ info->x_char = 0;
-+ if (intr_done)
-+ *intr_done = 0;
-+ return;
-+ }
-+ if (info->xmit.head == info->xmit.tail
-+ || info->tty->stopped
-+ || info->tty->hw_stopped) {
-+ info->IER &= ~UART_IER_THRI;
-+ serial_out(info, UART_IER, info->IER);
-+ return;
-+ }
-+
-+ count = info->xmit_fifo_size;
-+ do {
-+ serial_out(info, UART_TX, info->xmit.buf[info->xmit.tail]);
-+ info->xmit.tail = (info->xmit.tail + 1) & (SERIAL_XMIT_SIZE-1);
-+ info->state->icount.tx++;
-+ if (info->xmit.head == info->xmit.tail)
-+ break;
-+ } while (--count > 0);
-+
-+ if (CIRC_CNT(info->xmit.head,
-+ info->xmit.tail,
-+ SERIAL_XMIT_SIZE) < WAKEUP_CHARS)
-+ rs_sched_event(info, RS_EVENT_WRITE_WAKEUP);
-+
-+#ifdef SERIAL_DEBUG_INTR
-+ printk("THRE...");
-+#endif
-+ if (intr_done)
-+ *intr_done = 0;
-+
-+ if (info->xmit.head == info->xmit.tail) {
-+ info->IER &= ~UART_IER_THRI;
-+ serial_out(info, UART_IER, info->IER);
-+ }
-+}
-+
-+static _INLINE_ void check_modem_status(struct async_struct *info)
-+{
-+ int status;
-+ struct async_icount *icount;
-+
-+ status = serial_in(info, UART_MSR);
-+
-+ if (status & UART_MSR_ANY_DELTA) {
-+ icount = &info->state->icount;
-+ /* update input line counters */
-+ if (status & UART_MSR_TERI)
-+ icount->rng++;
-+ if (status & UART_MSR_DDSR)
-+ icount->dsr++;
-+ if (status & UART_MSR_DDCD) {
-+ icount->dcd++;
-+#ifdef CONFIG_HARD_PPS
-+ if ((info->flags & ASYNC_HARDPPS_CD) &&
-+ (status & UART_MSR_DCD))
-+ hardpps();
-+#endif
-+ }
-+ if (status & UART_MSR_DCTS)
-+ icount->cts++;
-+ wake_up_interruptible(&info->delta_msr_wait);
-+ }
-+
-+ if ((info->flags & ASYNC_CHECK_CD) && (status & UART_MSR_DDCD)) {
-+#if (defined(SERIAL_DEBUG_OPEN) || defined(SERIAL_DEBUG_INTR))
-+ printk("ttys%d CD now %s...", info->line,
-+ (status & UART_MSR_DCD) ? "on" : "off");
-+#endif
-+ if (status & UART_MSR_DCD)
-+ wake_up_interruptible(&info->open_wait);
-+ else if (!((info->flags & ASYNC_CALLOUT_ACTIVE) &&
-+ (info->flags & ASYNC_CALLOUT_NOHUP))) {
-+#ifdef SERIAL_DEBUG_OPEN
-+ printk("doing serial hangup...");
-+#endif
-+ if (info->tty)
-+ tty_hangup(info->tty);
-+ }
-+ }
-+ if (info->flags & ASYNC_CTS_FLOW) {
-+ if (info->tty->hw_stopped) {
-+ if (status & UART_MSR_CTS) {
-+#if (defined(SERIAL_DEBUG_INTR) || defined(SERIAL_DEBUG_FLOW))
-+ printk("CTS tx start...");
-+#endif
-+ info->tty->hw_stopped = 0;
-+ info->IER |= UART_IER_THRI;
-+ serial_out(info, UART_IER, info->IER);
-+ rs_sched_event(info, RS_EVENT_WRITE_WAKEUP);
-+ return;
-+ }
-+ } else {
-+ if (!(status & UART_MSR_CTS)) {
-+#if (defined(SERIAL_DEBUG_INTR) || defined(SERIAL_DEBUG_FLOW))
-+ printk("CTS tx stop...");
-+#endif
-+ info->tty->hw_stopped = 1;
-+ info->IER &= ~UART_IER_THRI;
-+ serial_out(info, UART_IER, info->IER);
-+ }
-+ }
-+ }
-+}
-+
-+#ifdef CONFIG_SERIAL_SHARE_IRQ
-+/*
-+ * This is the serial driver's generic interrupt routine
-+ */
-+static void rs_interrupt(int irq, void *dev_id, struct pt_regs * regs)
-+{
-+ int status, iir;
-+ struct async_struct * info;
-+ int pass_counter = 0;
-+ struct async_struct *end_mark = 0;
-+#ifdef CONFIG_SERIAL_MULTIPORT
-+ int first_multi = 0;
-+ struct rs_multiport_struct *multi;
-+#endif
-+
-+#ifdef SERIAL_DEBUG_INTR
-+ printk("rs_interrupt(%d)...", irq);
-+#endif
-+
-+ info = IRQ_ports[irq];
-+ if (!info)
-+ return;
-+
-+#ifdef CONFIG_SERIAL_MULTIPORT
-+ multi = &rs_multiport[irq];
-+ if (multi->port_monitor)
-+ first_multi = inb(multi->port_monitor);
-+#endif
-+
-+ do {
-+ if (!info->tty ||
-+ ((iir=serial_in(info, UART_IIR)) & UART_IIR_NO_INT)) {
-+ if (!end_mark)
-+ end_mark = info;
-+ goto next;
-+ }
-+#ifdef SERIAL_DEBUG_INTR
-+ printk("IIR = %x...", serial_in(info, UART_IIR));
-+#endif
-+ end_mark = 0;
-+
-+ info->last_active = jiffies;
-+
-+ status = serial_inp(info, UART_LSR);
-+#ifdef SERIAL_DEBUG_INTR
-+ printk("status = %x...", status);
-+#endif
-+ if (status & UART_LSR_DR)
-+ receive_chars(info, &status, regs);
-+ check_modem_status(info);
-+#ifdef CONFIG_MELAN
-+ if ((status & UART_LSR_THRE) ||
-+ /* for buggy ELAN processors */
-+ ((iir & UART_IIR_ID) == UART_IIR_THRI))
-+ transmit_chars(info, 0);
-+#else
-+ if (status & UART_LSR_THRE)
-+ transmit_chars(info, 0);
-+#endif
-+
-+ next:
-+ info = info->next_port;
-+ if (!info) {
-+ info = IRQ_ports[irq];
-+ if (pass_counter++ > RS_ISR_PASS_LIMIT) {
-+#if 0
-+ printk("rs loop break\n");
-+#endif
-+ break; /* Prevent infinite loops */
-+ }
-+ continue;
-+ }
-+ } while (end_mark != info);
-+#ifdef CONFIG_SERIAL_MULTIPORT
-+ if (multi->port_monitor)
-+ printk("rs port monitor (normal) irq %d: 0x%x, 0x%x\n",
-+ info->state->irq, first_multi,
-+ inb(multi->port_monitor));
-+#endif
-+#ifdef SERIAL_DEBUG_INTR
-+ printk("end.\n");
-+#endif
-+}
-+#endif /* #ifdef CONFIG_SERIAL_SHARE_IRQ */
-+
-+
-+/*
-+ * This is the serial driver's interrupt routine for a single port
-+ */
-+static void rs_interrupt_single(int irq, void *dev_id, struct pt_regs * regs)
-+{
-+ int status, iir;
-+ int pass_counter = 0;
-+ struct async_struct * info;
-+#ifdef CONFIG_SERIAL_MULTIPORT
-+ int first_multi = 0;
-+ struct rs_multiport_struct *multi;
-+#endif
-+
-+#ifdef SERIAL_DEBUG_INTR
-+ printk("rs_interrupt_single(%d)...", irq);
-+#endif
-+
-+ info = IRQ_ports[irq];
-+ if (!info || !info->tty)
-+ return;
-+
-+#ifdef CONFIG_SERIAL_MULTIPORT
-+ multi = &rs_multiport[irq];
-+ if (multi->port_monitor)
-+ first_multi = inb(multi->port_monitor);
-+#endif
-+
-+ iir = serial_in(info, UART_IIR);
-+ do {
-+ status = serial_inp(info, UART_LSR);
-+#ifdef SERIAL_DEBUG_INTR
-+ printk("status = %x...", status);
-+#endif
-+ if (status & UART_LSR_DR)
-+ receive_chars(info, &status, regs);
-+ check_modem_status(info);
-+#ifdef CONFIG_MELAN
-+ if ((status & UART_LSR_THRE) ||
-+ /* For buggy ELAN processors */
-+ ((iir & UART_IIR_ID) == UART_IIR_THRI))
-+ transmit_chars(info, 0);
-+#else
-+ if (status & UART_LSR_THRE)
-+ transmit_chars(info, 0);
-+#endif
-+ if (pass_counter++ > RS_ISR_PASS_LIMIT) {
-+#if SERIAL_DEBUG_INTR
-+ printk("rs_single loop break.\n");
-+#endif
-+ break;
-+ }
-+ iir = serial_in(info, UART_IIR);
-+#ifdef SERIAL_DEBUG_INTR
-+ printk("IIR = %x...", iir);
-+#endif
-+ } while ((iir & UART_IIR_NO_INT) == 0);
-+ info->last_active = jiffies;
-+#ifdef CONFIG_SERIAL_MULTIPORT
-+ if (multi->port_monitor)
-+ printk("rs port monitor (single) irq %d: 0x%x, 0x%x\n",
-+ info->state->irq, first_multi,
-+ inb(multi->port_monitor));
-+#endif
-+#ifdef SERIAL_DEBUG_INTR
-+ printk("end.\n");
-+#endif
-+}
-+
-+#ifdef CONFIG_SERIAL_MULTIPORT
-+/*
-+ * This is the serial driver's for multiport boards
-+ */
-+static void rs_interrupt_multi(int irq, void *dev_id, struct pt_regs * regs)
-+{
-+ int status;
-+ struct async_struct * info;
-+ int pass_counter = 0;
-+ int first_multi= 0;
-+ struct rs_multiport_struct *multi;
-+
-+#ifdef SERIAL_DEBUG_INTR
-+ printk("rs_interrupt_multi(%d)...", irq);
-+#endif
-+
-+ info = IRQ_ports[irq];
-+ if (!info)
-+ return;
-+ multi = &rs_multiport[irq];
-+ if (!multi->port1) {
-+ /* Should never happen */
-+ printk("rs_interrupt_multi: NULL port1!\n");
-+ return;
-+ }
-+ if (multi->port_monitor)
-+ first_multi = inb(multi->port_monitor);
-+
-+ while (1) {
-+ if (!info->tty ||
-+ (serial_in(info, UART_IIR) & UART_IIR_NO_INT))
-+ goto next;
-+
-+ info->last_active = jiffies;
-+
-+ status = serial_inp(info, UART_LSR);
-+#ifdef SERIAL_DEBUG_INTR
-+ printk("status = %x...", status);
-+#endif
-+ if (status & UART_LSR_DR)
-+ receive_chars(info, &status, regs);
-+ check_modem_status(info);
-+ if (status & UART_LSR_THRE)
-+ transmit_chars(info, 0);
-+
-+ next:
-+ info = info->next_port;
-+ if (info)
-+ continue;
-+
-+ info = IRQ_ports[irq];
-+ /*
-+ * The user was a bonehead, and misconfigured their
-+ * multiport info. Rather than lock up the kernel
-+ * in an infinite loop, if we loop too many times,
-+ * print a message and break out of the loop.
-+ */
-+ if (pass_counter++ > RS_ISR_PASS_LIMIT) {
-+ printk("Misconfigured multiport serial info "
-+ "for irq %d. Breaking out irq loop\n", irq);
-+ break;
-+ }
-+ if (multi->port_monitor)
-+ printk("rs port monitor irq %d: 0x%x, 0x%x\n",
-+ info->state->irq, first_multi,
-+ inb(multi->port_monitor));
-+ if ((inb(multi->port1) & multi->mask1) != multi->match1)
-+ continue;
-+ if (!multi->port2)
-+ break;
-+ if ((inb(multi->port2) & multi->mask2) != multi->match2)
-+ continue;
-+ if (!multi->port3)
-+ break;
-+ if ((inb(multi->port3) & multi->mask3) != multi->match3)
-+ continue;
-+ if (!multi->port4)
-+ break;
-+ if ((inb(multi->port4) & multi->mask4) != multi->match4)
-+ continue;
-+ break;
-+ }
-+#ifdef SERIAL_DEBUG_INTR
-+ printk("end.\n");
-+#endif
-+}
-+#endif
-+
-+/*
-+ * -------------------------------------------------------------------
-+ * Here ends the serial interrupt routines.
-+ * -------------------------------------------------------------------
-+ */
-+
-+/*
-+ * This routine is used to handle the "bottom half" processing for the
-+ * serial driver, known also the "software interrupt" processing.
-+ * This processing is done at the kernel interrupt level, after the
-+ * rs_interrupt() has returned, BUT WITH INTERRUPTS TURNED ON. This
-+ * is where time-consuming activities which can not be done in the
-+ * interrupt driver proper are done; the interrupt driver schedules
-+ * them using rs_sched_event(), and they get done here.
-+ */
-+static void do_serial_bh(void)
-+{
-+ run_task_queue(&tq_serial);
-+}
-+
-+static void do_softint(void *private_)
-+{
-+ struct async_struct *info = (struct async_struct *) private_;
-+ struct tty_struct *tty;
-+
-+ tty = info->tty;
-+ if (!tty)
-+ return;
-+
-+ if (test_and_clear_bit(RS_EVENT_WRITE_WAKEUP, &info->event)) {
-+ tty_wakeup(tty);
-+
-+#ifdef SERIAL_HAVE_POLL_WAIT
-+ wake_up_interruptible(&tty->poll_wait);
-+#endif
-+ }
-+}
-+
-+/*
-+ * This subroutine is called when the RS_TIMER goes off. It is used
-+ * by the serial driver to handle ports that do not have an interrupt
-+ * (irq=0). This doesn't work very well for 16450's, but gives barely
-+ * passable results for a 16550A. (Although at the expense of much
-+ * CPU overhead).
-+ */
-+static void rs_timer(unsigned long dummy)
-+{
-+ static unsigned long last_strobe;
-+ struct async_struct *info;
-+ unsigned int i;
-+ unsigned long flags;
-+
-+ if ((jiffies - last_strobe) >= RS_STROBE_TIME) {
-+ for (i=0; i < NR_IRQS; i++) {
-+ info = IRQ_ports[i];
-+ if (!info)
-+ continue;
-+ save_flags(flags); cli();
-+#ifdef CONFIG_SERIAL_SHARE_IRQ
-+ if (info->next_port) {
-+ do {
-+ serial_out(info, UART_IER, 0);
-+ info->IER |= UART_IER_THRI;
-+ serial_out(info, UART_IER, info->IER);
-+ info = info->next_port;
-+ } while (info);
-+#ifdef CONFIG_SERIAL_MULTIPORT
-+ if (rs_multiport[i].port1)
-+ rs_interrupt_multi(i, NULL, NULL);
-+ else
-+#endif
-+ rs_interrupt(i, NULL, NULL);
-+ } else
-+#endif /* CONFIG_SERIAL_SHARE_IRQ */
-+ rs_interrupt_single(i, NULL, NULL);
-+ restore_flags(flags);
-+ }
-+ }
-+ last_strobe = jiffies;
-+ mod_timer(&serial_timer, jiffies + RS_STROBE_TIME);
-+
-+ if (IRQ_ports[0]) {
-+ save_flags(flags); cli();
-+#ifdef CONFIG_SERIAL_SHARE_IRQ
-+ rs_interrupt(0, NULL, NULL);
-+#else
-+ rs_interrupt_single(0, NULL, NULL);
-+#endif
-+ restore_flags(flags);
-+
-+ mod_timer(&serial_timer, jiffies + IRQ_timeout[0]);
-+ }
-+}
-+
-+/*
-+ * ---------------------------------------------------------------
-+ * Low level utility subroutines for the serial driver: routines to
-+ * figure out the appropriate timeout for an interrupt chain, routines
-+ * to initialize and startup a serial port, and routines to shutdown a
-+ * serial port. Useful stuff like that.
-+ * ---------------------------------------------------------------
-+ */
-+
-+/*
-+ * This routine figures out the correct timeout for a particular IRQ.
-+ * It uses the smallest timeout of all of the serial ports in a
-+ * particular interrupt chain. Now only used for IRQ 0....
-+ */
-+static void figure_IRQ_timeout(int irq)
-+{
-+ struct async_struct *info;
-+ int timeout = 60*HZ; /* 60 seconds === a long time :-) */
-+
-+ info = IRQ_ports[irq];
-+ if (!info) {
-+ IRQ_timeout[irq] = 60*HZ;
-+ return;
-+ }
-+ while (info) {
-+ if (info->timeout < timeout)
-+ timeout = info->timeout;
-+ info = info->next_port;
-+ }
-+ if (!irq)
-+ timeout = timeout / 2;
-+ IRQ_timeout[irq] = (timeout > 3) ? timeout-2 : 1;
-+}
-+
-+#ifdef CONFIG_SERIAL_RSA
-+/* Attempts to turn on the RSA FIFO. Returns zero on failure */
-+static int enable_rsa(struct async_struct *info)
-+{
-+ unsigned char mode;
-+ int result;
-+ unsigned long flags;
-+
-+ save_flags(flags); cli();
-+ mode = serial_inp(info, UART_RSA_MSR);
-+ result = mode & UART_RSA_MSR_FIFO;
-+
-+ if (!result) {
-+ serial_outp(info, UART_RSA_MSR, mode | UART_RSA_MSR_FIFO);
-+ mode = serial_inp(info, UART_RSA_MSR);
-+ result = mode & UART_RSA_MSR_FIFO;
-+ }
-+
-+ restore_flags(flags);
-+ return result;
-+}
-+
-+/* Attempts to turn off the RSA FIFO. Returns zero on failure */
-+static int disable_rsa(struct async_struct *info)
-+{
-+ unsigned char mode;
-+ int result;
-+ unsigned long flags;
-+
-+ save_flags(flags); cli();
-+ mode = serial_inp(info, UART_RSA_MSR);
-+ result = !(mode & UART_RSA_MSR_FIFO);
-+
-+ if (!result) {
-+ serial_outp(info, UART_RSA_MSR, mode & ~UART_RSA_MSR_FIFO);
-+ mode = serial_inp(info, UART_RSA_MSR);
-+ result = !(mode & UART_RSA_MSR_FIFO);
-+ }
-+
-+ restore_flags(flags);
-+ return result;
-+}
-+#endif /* CONFIG_SERIAL_RSA */
-+
-+static int startup(struct async_struct * info)
-+{
-+ unsigned long flags;
-+ int retval=0;
-+ void (*handler)(int, void *, struct pt_regs *);
-+ struct serial_state *state= info->state;
-+ unsigned long page;
-+#ifdef CONFIG_SERIAL_MANY_PORTS
-+ unsigned short ICP;
-+#endif
-+
-+ page = get_zeroed_page(GFP_KERNEL);
-+ if (!page)
-+ return -ENOMEM;
-+
-+ save_flags(flags); cli();
-+
-+ if (info->flags & ASYNC_INITIALIZED) {
-+ free_page(page);
-+ goto errout;
-+ }
-+
-+ if (!CONFIGURED_SERIAL_PORT(state) || !state->type) {
-+ if (info->tty)
-+ set_bit(TTY_IO_ERROR, &info->tty->flags);
-+ free_page(page);
-+ goto errout;
-+ }
-+ if (info->xmit.buf)
-+ free_page(page);
-+ else
-+ info->xmit.buf = (unsigned char *) page;
-+
-+#ifdef SERIAL_DEBUG_OPEN
-+ printk("starting up ttys%d (irq %d)...", info->line, state->irq);
-+#endif
-+
-+ if (uart_config[state->type].flags & UART_STARTECH) {
-+ /* Wake up UART */
-+ serial_outp(info, UART_LCR, 0xBF);
-+ serial_outp(info, UART_EFR, UART_EFR_ECB);
-+ /*
-+ * Turn off LCR == 0xBF so we actually set the IER
-+ * register on the XR16C850
-+ */
-+ serial_outp(info, UART_LCR, 0);
-+ serial_outp(info, UART_IER, 0);
-+ /*
-+ * Now reset LCR so we can turn off the ECB bit
-+ */
-+ serial_outp(info, UART_LCR, 0xBF);
-+ serial_outp(info, UART_EFR, 0);
-+ /*
-+ * For a XR16C850, we need to set the trigger levels
-+ */
-+ if (state->type == PORT_16850) {
-+ serial_outp(info, UART_FCTR, UART_FCTR_TRGD |
-+ UART_FCTR_RX);
-+ serial_outp(info, UART_TRG, UART_TRG_96);
-+ serial_outp(info, UART_FCTR, UART_FCTR_TRGD |
-+ UART_FCTR_TX);
-+ serial_outp(info, UART_TRG, UART_TRG_96);
-+ }
-+ serial_outp(info, UART_LCR, 0);
-+ }
-+
-+ if (state->type == PORT_16750) {
-+ /* Wake up UART */
-+ serial_outp(info, UART_IER, 0);
-+ }
-+
-+ if (state->type == PORT_16C950) {
-+ /* Wake up and initialize UART */
-+ info->ACR = 0;
-+ serial_outp(info, UART_LCR, 0xBF);
-+ serial_outp(info, UART_EFR, UART_EFR_ECB);
-+ serial_outp(info, UART_IER, 0);
-+ serial_outp(info, UART_LCR, 0);
-+ serial_icr_write(info, UART_CSR, 0); /* Reset the UART */
-+ serial_outp(info, UART_LCR, 0xBF);
-+ serial_outp(info, UART_EFR, UART_EFR_ECB);
-+ serial_outp(info, UART_LCR, 0);
-+ }
-+
-+#ifdef CONFIG_SERIAL_RSA
-+ /*
-+ * If this is an RSA port, see if we can kick it up to the
-+ * higher speed clock.
-+ */
-+ if (state->type == PORT_RSA) {
-+ if (state->baud_base != SERIAL_RSA_BAUD_BASE &&
-+ enable_rsa(info))
-+ state->baud_base = SERIAL_RSA_BAUD_BASE;
-+ if (state->baud_base == SERIAL_RSA_BAUD_BASE)
-+ serial_outp(info, UART_RSA_FRR, 0);
-+ }
-+#endif
-+
-+ /*
-+ * Clear the FIFO buffers and disable them
-+ * (they will be reenabled in change_speed())
-+ */
-+ if (uart_config[state->type].flags & UART_CLEAR_FIFO) {
-+ serial_outp(info, UART_FCR, UART_FCR_ENABLE_FIFO);
-+ serial_outp(info, UART_FCR, (UART_FCR_ENABLE_FIFO |
-+ UART_FCR_CLEAR_RCVR |
-+ UART_FCR_CLEAR_XMIT));
-+ serial_outp(info, UART_FCR, 0);
-+ }
-+
-+ /*
-+ * Clear the interrupt registers.
-+ */
-+ (void) serial_inp(info, UART_LSR);
-+ (void) serial_inp(info, UART_RX);
-+ (void) serial_inp(info, UART_IIR);
-+ (void) serial_inp(info, UART_MSR);
-+
-+ /*
-+ * At this point there's no way the LSR could still be 0xFF;
-+ * if it is, then bail out, because there's likely no UART
-+ * here.
-+ */
-+ if (!(info->flags & ASYNC_BUGGY_UART) &&
-+ (serial_inp(info, UART_LSR) == 0xff)) {
-+ printk("ttyS%d: LSR safety check engaged!\n", state->line);
-+ if (capable(CAP_SYS_ADMIN)) {
-+ if (info->tty)
-+ set_bit(TTY_IO_ERROR, &info->tty->flags);
-+ } else
-+ retval = -ENODEV;
-+ goto errout;
-+ }
-+
-+ /*
-+ * Allocate the IRQ if necessary
-+ */
-+ if (state->irq && (!IRQ_ports[state->irq] ||
-+ !IRQ_ports[state->irq]->next_port)) {
-+ if (IRQ_ports[state->irq]) {
-+#ifdef CONFIG_SERIAL_SHARE_IRQ
-+ free_irq(state->irq, &IRQ_ports[state->irq]);
-+#ifdef CONFIG_SERIAL_MULTIPORT
-+ if (rs_multiport[state->irq].port1)
-+ handler = rs_interrupt_multi;
-+ else
-+#endif
-+ handler = rs_interrupt;
-+#else
-+ retval = -EBUSY;
-+ goto errout;
-+#endif /* CONFIG_SERIAL_SHARE_IRQ */
-+ } else
-+ handler = rs_interrupt_single;
-+
-+ retval = request_irq(state->irq, handler, SA_SHIRQ,
-+ "serial", &IRQ_ports[state->irq]);
-+ if (retval) {
-+ if (capable(CAP_SYS_ADMIN)) {
-+ if (info->tty)
-+ set_bit(TTY_IO_ERROR,
-+ &info->tty->flags);
-+ retval = 0;
-+ }
-+ goto errout;
-+ }
-+ }
-+
-+ /*
-+ * Insert serial port into IRQ chain.
-+ */
-+ info->prev_port = 0;
-+ info->next_port = IRQ_ports[state->irq];
-+ if (info->next_port)
-+ info->next_port->prev_port = info;
-+ IRQ_ports[state->irq] = info;
-+ figure_IRQ_timeout(state->irq);
-+
-+ /*
-+ * Now, initialize the UART
-+ */
-+ serial_outp(info, UART_LCR, UART_LCR_WLEN8); /* reset DLAB */
-+
-+ info->MCR = 0;
-+ if (info->tty->termios->c_cflag & CBAUD)
-+ info->MCR = UART_MCR_DTR | UART_MCR_RTS;
-+#ifdef CONFIG_SERIAL_MANY_PORTS
-+ if (info->flags & ASYNC_FOURPORT) {
-+ if (state->irq == 0)
-+ info->MCR |= UART_MCR_OUT1;
-+ } else
-+#endif
-+ {
-+ if (state->irq != 0)
-+ info->MCR |= UART_MCR_OUT2;
-+ }
-+ info->MCR |= ALPHA_KLUDGE_MCR; /* Don't ask */
-+ serial_outp(info, UART_MCR, info->MCR);
-+
-+ /*
-+ * Finally, enable interrupts
-+ */
-+ info->IER = UART_IER_MSI | UART_IER_RLSI | UART_IER_RDI;
-+ serial_outp(info, UART_IER, info->IER); /* enable interrupts */
-+
-+#ifdef CONFIG_SERIAL_MANY_PORTS
-+ if (info->flags & ASYNC_FOURPORT) {
-+ /* Enable interrupts on the AST Fourport board */
-+ ICP = (info->port & 0xFE0) | 0x01F;
-+ outb_p(0x80, ICP);
-+ (void) inb_p(ICP);
-+ }
-+#endif
-+
-+ /*
-+ * And clear the interrupt registers again for luck.
-+ */
-+ (void)serial_inp(info, UART_LSR);
-+ (void)serial_inp(info, UART_RX);
-+ (void)serial_inp(info, UART_IIR);
-+ (void)serial_inp(info, UART_MSR);
-+
-+ if (info->tty)
-+ clear_bit(TTY_IO_ERROR, &info->tty->flags);
-+ info->xmit.head = info->xmit.tail = 0;
-+
-+ /*
-+ * Set up serial timers...
-+ */
-+ mod_timer(&serial_timer, jiffies + 2*HZ/100);
-+
-+ /*
-+ * Set up the tty->alt_speed kludge
-+ */
-+#if (LINUX_VERSION_CODE >= 131394) /* Linux 2.1.66 */
-+ if (info->tty) {
-+ if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
-+ info->tty->alt_speed = 57600;
-+ if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
-+ info->tty->alt_speed = 115200;
-+ if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
-+ info->tty->alt_speed = 230400;
-+ if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
-+ info->tty->alt_speed = 460800;
-+ }
-+#endif
-+
-+ /*
-+ * and set the speed of the serial port
-+ */
-+ change_speed(info, 0);
-+
-+ info->flags |= ASYNC_INITIALIZED;
-+ restore_flags(flags);
-+ return 0;
-+
-+errout:
-+ restore_flags(flags);
-+ return retval;
-+}
-+
-+/*
-+ * This routine will shutdown a serial port; interrupts are disabled, and
-+ * DTR is dropped if the hangup on close termio flag is on.
-+ */
-+static void shutdown(struct async_struct * info)
-+{
-+ unsigned long flags;
-+ struct serial_state *state;
-+ int retval;
-+
-+ if (!(info->flags & ASYNC_INITIALIZED))
-+ return;
-+
-+ state = info->state;
-+
-+#ifdef SERIAL_DEBUG_OPEN
-+ printk("Shutting down serial port %d (irq %d)....", info->line,
-+ state->irq);
-+#endif
-+
-+ save_flags(flags); cli(); /* Disable interrupts */
-+
-+ /*
-+ * clear delta_msr_wait queue to avoid mem leaks: we may free the irq
-+ * here so the queue might never be waken up
-+ */
-+ wake_up_interruptible(&info->delta_msr_wait);
-+
-+ /*
-+ * First unlink the serial port from the IRQ chain...
-+ */
-+ if (info->next_port)
-+ info->next_port->prev_port = info->prev_port;
-+ if (info->prev_port)
-+ info->prev_port->next_port = info->next_port;
-+ else
-+ IRQ_ports[state->irq] = info->next_port;
-+ figure_IRQ_timeout(state->irq);
-+
-+ /*
-+ * Free the IRQ, if necessary
-+ */
-+ if (state->irq && (!IRQ_ports[state->irq] ||
-+ !IRQ_ports[state->irq]->next_port)) {
-+ if (IRQ_ports[state->irq]) {
-+ free_irq(state->irq, &IRQ_ports[state->irq]);
-+ retval = request_irq(state->irq, rs_interrupt_single,
-+ SA_SHIRQ, "serial",
-+ &IRQ_ports[state->irq]);
-+
-+ if (retval)
-+ printk("serial shutdown: request_irq: error %d"
-+ " Couldn't reacquire IRQ.\n", retval);
-+ } else
-+ free_irq(state->irq, &IRQ_ports[state->irq]);
-+ }
-+
-+ if (info->xmit.buf) {
-+ unsigned long pg = (unsigned long) info->xmit.buf;
-+ info->xmit.buf = 0;
-+ free_page(pg);
-+ }
-+
-+ info->IER = 0;
-+ serial_outp(info, UART_IER, 0x00); /* disable all intrs */
-+#ifdef CONFIG_SERIAL_MANY_PORTS
-+ if (info->flags & ASYNC_FOURPORT) {
-+ /* reset interrupts on the AST Fourport board */
-+ (void) inb((info->port & 0xFE0) | 0x01F);
-+ info->MCR |= UART_MCR_OUT1;
-+ } else
-+#endif
-+ info->MCR &= ~UART_MCR_OUT2;
-+ info->MCR |= ALPHA_KLUDGE_MCR; /* Don't ask */
-+
-+ /* disable break condition */
-+ serial_out(info, UART_LCR, serial_inp(info, UART_LCR) & ~UART_LCR_SBC);
-+
-+ if (!info->tty || (info->tty->termios->c_cflag & HUPCL))
-+ info->MCR &= ~(UART_MCR_DTR|UART_MCR_RTS);
-+ serial_outp(info, UART_MCR, info->MCR);
-+
-+ /* disable FIFO's */
-+ serial_outp(info, UART_FCR, (UART_FCR_ENABLE_FIFO |
-+ UART_FCR_CLEAR_RCVR |
-+ UART_FCR_CLEAR_XMIT));
-+ serial_outp(info, UART_FCR, 0);
-+
-+#ifdef CONFIG_SERIAL_RSA
-+ /*
-+ * Reset the RSA board back to 115kbps compat mode.
-+ */
-+ if ((state->type == PORT_RSA) &&
-+ (state->baud_base == SERIAL_RSA_BAUD_BASE &&
-+ disable_rsa(info)))
-+ state->baud_base = SERIAL_RSA_BAUD_BASE_LO;
-+#endif
-+
-+
-+ (void)serial_in(info, UART_RX); /* read data port to reset things */
-+
-+ if (info->tty)
-+ set_bit(TTY_IO_ERROR, &info->tty->flags);
-+
-+ if (uart_config[info->state->type].flags & UART_STARTECH) {
-+ /* Arrange to enter sleep mode */
-+ serial_outp(info, UART_LCR, 0xBF);
-+ serial_outp(info, UART_EFR, UART_EFR_ECB);
-+ serial_outp(info, UART_LCR, 0);
-+ serial_outp(info, UART_IER, UART_IERX_SLEEP);
-+ serial_outp(info, UART_LCR, 0xBF);
-+ serial_outp(info, UART_EFR, 0);
-+ serial_outp(info, UART_LCR, 0);
-+ }
-+ if (info->state->type == PORT_16750) {
-+ /* Arrange to enter sleep mode */
-+ serial_outp(info, UART_IER, UART_IERX_SLEEP);
-+ }
-+ info->flags &= ~ASYNC_INITIALIZED;
-+ restore_flags(flags);
-+}
-+
-+#if (LINUX_VERSION_CODE < 131394) /* Linux 2.1.66 */
-+static int baud_table[] = {
-+ 0, 50, 75, 110, 134, 150, 200, 300,
-+ 600, 1200, 1800, 2400, 4800, 9600, 19200,
-+ 38400, 57600, 115200, 230400, 460800, 0 };
-+
-+static int tty_get_baud_rate(struct tty_struct *tty)
-+{
-+ struct async_struct * info = (struct async_struct *)tty->driver_data;
-+ unsigned int cflag, i;
-+
-+ cflag = tty->termios->c_cflag;
-+
-+ i = cflag & CBAUD;
-+ if (i & CBAUDEX) {
-+ i &= ~CBAUDEX;
-+ if (i < 1 || i > 2)
-+ tty->termios->c_cflag &= ~CBAUDEX;
-+ else
-+ i += 15;
-+ }
-+ if (i == 15) {
-+ if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
-+ i += 1;
-+ if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
-+ i += 2;
-+ }
-+ return baud_table[i];
-+}
-+#endif
-+
-+/*
-+ * This routine is called to set the UART divisor registers to match
-+ * the specified baud rate for a serial port.
-+ */
-+static void change_speed(struct async_struct *info,
-+ struct termios *old_termios)
-+{
-+ int quot = 0, baud_base, baud;
-+ unsigned cflag, cval, fcr = 0;
-+ int bits;
-+ unsigned long flags;
-+
-+ if (!info->tty || !info->tty->termios)
-+ return;
-+ cflag = info->tty->termios->c_cflag;
-+ if (!CONFIGURED_SERIAL_PORT(info))
-+ return;
-+
-+ /* byte size and parity */
-+ switch (cflag & CSIZE) {
-+ case CS5: cval = 0x00; bits = 7; break;
-+ case CS6: cval = 0x01; bits = 8; break;
-+ case CS7: cval = 0x02; bits = 9; break;
-+ case CS8: cval = 0x03; bits = 10; break;
-+ /* Never happens, but GCC is too dumb to figure it out */
-+ default: cval = 0x00; bits = 7; break;
-+ }
-+ if (cflag & CSTOPB) {
-+ cval |= 0x04;
-+ bits++;
-+ }
-+ if (cflag & PARENB) {
-+ cval |= UART_LCR_PARITY;
-+ bits++;
-+ }
-+ if (!(cflag & PARODD))
-+ cval |= UART_LCR_EPAR;
-+#ifdef CMSPAR
-+ if (cflag & CMSPAR)
-+ cval |= UART_LCR_SPAR;
-+#endif
-+
-+ /* Determine divisor based on baud rate */
-+ baud = tty_get_baud_rate(info->tty);
-+ if (!baud)
-+ baud = 9600; /* B0 transition handled in rs_set_termios */
-+#ifdef CONFIG_SERIAL_RSA
-+ if ((info->state->type == PORT_RSA) &&
-+ (info->state->baud_base != SERIAL_RSA_BAUD_BASE) &&
-+ enable_rsa(info))
-+ info->state->baud_base = SERIAL_RSA_BAUD_BASE;
-+#endif
-+ baud_base = info->state->baud_base;
-+ if (info->state->type == PORT_16C950) {
-+ if (baud <= baud_base)
-+ serial_icr_write(info, UART_TCR, 0);
-+ else if (baud <= 2*baud_base) {
-+ serial_icr_write(info, UART_TCR, 0x8);
-+ baud_base = baud_base * 2;
-+ } else if (baud <= 4*baud_base) {
-+ serial_icr_write(info, UART_TCR, 0x4);
-+ baud_base = baud_base * 4;
-+ } else
-+ serial_icr_write(info, UART_TCR, 0);
-+ }
-+ if (baud == 38400 &&
-+ ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST))
-+ quot = info->state->custom_divisor;
-+ else {
-+ if (baud == 134)
-+ /* Special case since 134 is really 134.5 */
-+ quot = (2*baud_base / 269);
-+ else if (baud)
-+ quot = baud_base / baud;
-+ }
-+ /* If the quotient is zero refuse the change */
-+ if (!quot && old_termios) {
-+ info->tty->termios->c_cflag &= ~CBAUD;
-+ info->tty->termios->c_cflag |= (old_termios->c_cflag & CBAUD);
-+ baud = tty_get_baud_rate(info->tty);
-+ if (!baud)
-+ baud = 9600;
-+ if (baud == 38400 &&
-+ ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST))
-+ quot = info->state->custom_divisor;
-+ else {
-+ if (baud == 134)
-+ /* Special case since 134 is really 134.5 */
-+ quot = (2*baud_base / 269);
-+ else if (baud)
-+ quot = baud_base / baud;
-+ }
-+ }
-+ /* As a last resort, if the quotient is zero, default to 9600 bps */
-+ if (!quot)
-+ quot = baud_base / 9600;
-+ /*
-+ * Work around a bug in the Oxford Semiconductor 952 rev B
-+ * chip which causes it to seriously miscalculate baud rates
-+ * when DLL is 0.
-+ */
-+ if (((quot & 0xFF) == 0) && (info->state->type == PORT_16C950) &&
-+ (info->state->revision == 0x5201))
-+ quot++;
-+
-+ info->quot = quot;
-+ info->timeout = ((info->xmit_fifo_size*HZ*bits*quot) / baud_base);
-+ info->timeout += HZ/50; /* Add .02 seconds of slop */
-+
-+ /* Set up FIFO's */
-+ if (uart_config[info->state->type].flags & UART_USE_FIFO) {
-+ if ((info->state->baud_base / quot) < 2400)
-+ fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_1;
-+#ifdef CONFIG_SERIAL_RSA
-+ else if (info->state->type == PORT_RSA)
-+ fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_14;
-+#endif
-+ else
-+ fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_8;
-+ }
-+ if (info->state->type == PORT_16750)
-+ fcr |= UART_FCR7_64BYTE;
-+
-+ /* CTS flow control flag and modem status interrupts */
-+ info->IER &= ~UART_IER_MSI;
-+ if (info->flags & ASYNC_HARDPPS_CD)
-+ info->IER |= UART_IER_MSI;
-+ if (cflag & CRTSCTS) {
-+ info->flags |= ASYNC_CTS_FLOW;
-+ info->IER |= UART_IER_MSI;
-+ } else
-+ info->flags &= ~ASYNC_CTS_FLOW;
-+ if (cflag & CLOCAL)
-+ info->flags &= ~ASYNC_CHECK_CD;
-+ else {
-+ info->flags |= ASYNC_CHECK_CD;
-+ info->IER |= UART_IER_MSI;
-+ }
-+ serial_out(info, UART_IER, info->IER);
-+
-+ /*
-+ * Set up parity check flag
-+ */
-+#define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
-+
-+ info->read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR;
-+ if (I_INPCK(info->tty))
-+ info->read_status_mask |= UART_LSR_FE | UART_LSR_PE;
-+ if (I_BRKINT(info->tty) || I_PARMRK(info->tty))
-+ info->read_status_mask |= UART_LSR_BI;
-+
-+ /*
-+ * Characters to ignore
-+ */
-+ info->ignore_status_mask = 0;
-+ if (I_IGNPAR(info->tty))
-+ info->ignore_status_mask |= UART_LSR_PE | UART_LSR_FE;
-+ if (I_IGNBRK(info->tty)) {
-+ info->ignore_status_mask |= UART_LSR_BI;
-+ /*
-+ * If we're ignore parity and break indicators, ignore
-+ * overruns too. (For real raw support).
-+ */
-+ if (I_IGNPAR(info->tty))
-+ info->ignore_status_mask |= UART_LSR_OE;
-+ }
-+ /*
-+ * !!! ignore all characters if CREAD is not set
-+ */
-+ if ((cflag & CREAD) == 0)
-+ info->ignore_status_mask |= UART_LSR_DR;
-+ save_flags(flags); cli();
-+ if (uart_config[info->state->type].flags & UART_STARTECH) {
-+ serial_outp(info, UART_LCR, 0xBF);
-+ serial_outp(info, UART_EFR,
-+ (cflag & CRTSCTS) ? UART_EFR_CTS : 0);
-+ }
-+ serial_outp(info, UART_LCR, cval | UART_LCR_DLAB); /* set DLAB */
-+ serial_outp(info, UART_DLL, quot & 0xff); /* LS of divisor */
-+ serial_outp(info, UART_DLM, quot >> 8); /* MS of divisor */
-+ if (info->state->type == PORT_16750)
-+ serial_outp(info, UART_FCR, fcr); /* set fcr */
-+ serial_outp(info, UART_LCR, cval); /* reset DLAB */
-+ info->LCR = cval; /* Save LCR */
-+ if (info->state->type != PORT_16750) {
-+ if (fcr & UART_FCR_ENABLE_FIFO) {
-+ /* emulated UARTs (Lucent Venus 167x) need two steps */
-+ serial_outp(info, UART_FCR, UART_FCR_ENABLE_FIFO);
-+ }
-+ serial_outp(info, UART_FCR, fcr); /* set fcr */
-+ }
-+ restore_flags(flags);
-+}
-+
-+static void rs_put_char(struct tty_struct *tty, unsigned char ch)
-+{
-+ struct async_struct *info = (struct async_struct *)tty->driver_data;
-+ unsigned long flags;
-+
-+ if (serial_paranoia_check(info, tty->device, "rs_put_char"))
-+ return;
-+
-+ if (!tty || !info->xmit.buf)
-+ return;
-+
-+ save_flags(flags); cli();
-+ if (CIRC_SPACE(info->xmit.head,
-+ info->xmit.tail,
-+ SERIAL_XMIT_SIZE) == 0) {
-+ restore_flags(flags);
-+ return;
-+ }
-+
-+ info->xmit.buf[info->xmit.head] = ch;
-+ info->xmit.head = (info->xmit.head + 1) & (SERIAL_XMIT_SIZE-1);
-+ restore_flags(flags);
-+}
-+
-+static void rs_flush_chars(struct tty_struct *tty)
-+{
-+ struct async_struct *info = (struct async_struct *)tty->driver_data;
-+ unsigned long flags;
-+
-+ if (serial_paranoia_check(info, tty->device, "rs_flush_chars"))
-+ return;
-+
-+ if (info->xmit.head == info->xmit.tail
-+ || tty->stopped
-+ || tty->hw_stopped
-+ || !info->xmit.buf)
-+ return;
-+
-+ save_flags(flags); cli();
-+ info->IER |= UART_IER_THRI;
-+ serial_out(info, UART_IER, info->IER);
-+ restore_flags(flags);
-+}
-+
-+static int rs_write(struct tty_struct * tty, int from_user,
-+ const unsigned char *buf, int count)
-+{
-+ int c, ret = 0;
-+ struct async_struct *info = (struct async_struct *)tty->driver_data;
-+ unsigned long flags;
-+
-+ if (serial_paranoia_check(info, tty->device, "rs_write"))
-+ return 0;
-+
-+ if (!tty || !info->xmit.buf || !tmp_buf)
-+ return 0;
-+
-+ save_flags(flags);
-+ if (from_user) {
-+ down(&tmp_buf_sem);
-+ while (1) {
-+ int c1;
-+ c = CIRC_SPACE_TO_END(info->xmit.head,
-+ info->xmit.tail,
-+ SERIAL_XMIT_SIZE);
-+ if (count < c)
-+ c = count;
-+ if (c <= 0)
-+ break;
-+
-+ c -= copy_from_user(tmp_buf, buf, c);
-+ if (!c) {
-+ if (!ret)
-+ ret = -EFAULT;
-+ break;
-+ }
-+ cli();
-+ c1 = CIRC_SPACE_TO_END(info->xmit.head,
-+ info->xmit.tail,
-+ SERIAL_XMIT_SIZE);
-+ if (c1 < c)
-+ c = c1;
-+ memcpy(info->xmit.buf + info->xmit.head, tmp_buf, c);
-+ info->xmit.head = ((info->xmit.head + c) &
-+ (SERIAL_XMIT_SIZE-1));
-+ restore_flags(flags);
-+ buf += c;
-+ count -= c;
-+ ret += c;
-+ }
-+ up(&tmp_buf_sem);
-+ } else {
-+ cli();
-+ while (1) {
-+ c = CIRC_SPACE_TO_END(info->xmit.head,
-+ info->xmit.tail,
-+ SERIAL_XMIT_SIZE);
-+ if (count < c)
-+ c = count;
-+ if (c <= 0) {
-+ break;
-+ }
-+ memcpy(info->xmit.buf + info->xmit.head, buf, c);
-+ info->xmit.head = ((info->xmit.head + c) &
-+ (SERIAL_XMIT_SIZE-1));
-+ buf += c;
-+ count -= c;
-+ ret += c;
-+ }
-+ restore_flags(flags);
-+ }
-+ if (info->xmit.head != info->xmit.tail
-+ && !tty->stopped
-+ && !tty->hw_stopped
-+ && !(info->IER & UART_IER_THRI)) {
-+ info->IER |= UART_IER_THRI;
-+ serial_out(info, UART_IER, info->IER);
-+ }
-+ return ret;
-+}
-+
-+static int rs_write_room(struct tty_struct *tty)
-+{
-+ struct async_struct *info = (struct async_struct *)tty->driver_data;
-+
-+ if (serial_paranoia_check(info, tty->device, "rs_write_room"))
-+ return 0;
-+ return CIRC_SPACE(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE);
-+}
-+
-+static int rs_chars_in_buffer(struct tty_struct *tty)
-+{
-+ struct async_struct *info = (struct async_struct *)tty->driver_data;
-+
-+ if (serial_paranoia_check(info, tty->device, "rs_chars_in_buffer"))
-+ return 0;
-+ return CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE);
-+}
-+
-+static void rs_flush_buffer(struct tty_struct *tty)
-+{
-+ struct async_struct *info = (struct async_struct *)tty->driver_data;
-+ unsigned long flags;
-+
-+ if (serial_paranoia_check(info, tty->device, "rs_flush_buffer"))
-+ return;
-+ save_flags(flags); cli();
-+ info->xmit.head = info->xmit.tail = 0;
-+ restore_flags(flags);
-+#ifdef SERIAL_HAVE_POLL_WAIT
-+ wake_up_interruptible(&tty->poll_wait);
-+#endif
-+ tty_wakeup(tty);
-+}
-+
-+/*
-+ * This function is used to send a high-priority XON/XOFF character to
-+ * the device
-+ */
-+static void rs_send_xchar(struct tty_struct *tty, char ch)
-+{
-+ struct async_struct *info = (struct async_struct *)tty->driver_data;
-+
-+ if (serial_paranoia_check(info, tty->device, "rs_send_char"))
-+ return;
-+
-+ info->x_char = ch;
-+ if (ch) {
-+ /* Make sure transmit interrupts are on */
-+ info->IER |= UART_IER_THRI;
-+ serial_out(info, UART_IER, info->IER);
-+ }
-+}
-+
-+/*
-+ * ------------------------------------------------------------
-+ * rs_throttle()
-+ *
-+ * This routine is called by the upper-layer tty layer to signal that
-+ * incoming characters should be throttled.
-+ * ------------------------------------------------------------
-+ */
-+static void rs_throttle(struct tty_struct * tty)
-+{
-+ struct async_struct *info = (struct async_struct *)tty->driver_data;
-+ unsigned long flags;
-+#ifdef SERIAL_DEBUG_THROTTLE
-+ char buf[64];
-+
-+ printk("throttle %s: %d....\n", tty_name(tty, buf),
-+ tty->ldisc.chars_in_buffer(tty));
-+#endif
-+
-+ if (serial_paranoia_check(info, tty->device, "rs_throttle"))
-+ return;
-+
-+ if (I_IXOFF(tty))
-+ rs_send_xchar(tty, STOP_CHAR(tty));
-+
-+ if (tty->termios->c_cflag & CRTSCTS)
-+ info->MCR &= ~UART_MCR_RTS;
-+
-+ save_flags(flags); cli();
-+ serial_out(info, UART_MCR, info->MCR);
-+ restore_flags(flags);
-+}
-+
-+static void rs_unthrottle(struct tty_struct * tty)
-+{
-+ struct async_struct *info = (struct async_struct *)tty->driver_data;
-+ unsigned long flags;
-+#ifdef SERIAL_DEBUG_THROTTLE
-+ char buf[64];
-+
-+ printk("unthrottle %s: %d....\n", tty_name(tty, buf),
-+ tty->ldisc.chars_in_buffer(tty));
-+#endif
-+
-+ if (serial_paranoia_check(info, tty->device, "rs_unthrottle"))
-+ return;
-+
-+ if (I_IXOFF(tty)) {
-+ if (info->x_char)
-+ info->x_char = 0;
-+ else
-+ rs_send_xchar(tty, START_CHAR(tty));
-+ }
-+ if (tty->termios->c_cflag & CRTSCTS)
-+ info->MCR |= UART_MCR_RTS;
-+ save_flags(flags); cli();
-+ serial_out(info, UART_MCR, info->MCR);
-+ restore_flags(flags);
-+}
-+
-+/*
-+ * ------------------------------------------------------------
-+ * rs_ioctl() and friends
-+ * ------------------------------------------------------------
-+ */
-+
-+static int get_serial_info(struct async_struct * info,
-+ struct serial_struct * retinfo)
-+{
-+ struct serial_struct tmp;
-+ struct serial_state *state = info->state;
-+
-+ if (!retinfo)
-+ return -EFAULT;
-+ memset(&tmp, 0, sizeof(tmp));
-+ tmp.type = state->type;
-+ tmp.line = state->line;
-+ tmp.port = state->port;
-+ if (HIGH_BITS_OFFSET)
-+ tmp.port_high = state->port >> HIGH_BITS_OFFSET;
-+ else
-+ tmp.port_high = 0;
-+ tmp.irq = state->irq;
-+ tmp.flags = state->flags;
-+ tmp.xmit_fifo_size = state->xmit_fifo_size;
-+ tmp.baud_base = state->baud_base;
-+ tmp.close_delay = state->close_delay;
-+ tmp.closing_wait = state->closing_wait;
-+ tmp.custom_divisor = state->custom_divisor;
-+ tmp.hub6 = state->hub6;
-+ tmp.io_type = state->io_type;
-+ if (copy_to_user(retinfo,&tmp,sizeof(*retinfo)))
-+ return -EFAULT;
-+ return 0;
-+}
-+
-+static int set_serial_info(struct async_struct * info,
-+ struct serial_struct * new_info)
-+{
-+ struct serial_struct new_serial;
-+ struct serial_state old_state, *state;
-+ unsigned int i,change_irq,change_port;
-+ int retval = 0;
-+ unsigned long new_port;
-+
-+ if (copy_from_user(&new_serial,new_info,sizeof(new_serial)))
-+ return -EFAULT;
-+ state = info->state;
-+ old_state = *state;
-+
-+ new_port = new_serial.port;
-+ if (HIGH_BITS_OFFSET)
-+ new_port += (unsigned long) new_serial.port_high << HIGH_BITS_OFFSET;
-+
-+ change_irq = new_serial.irq != state->irq;
-+ change_port = (new_port != ((int) state->port)) ||
-+ (new_serial.hub6 != state->hub6);
-+
-+ if (!capable(CAP_SYS_ADMIN)) {
-+ if (change_irq || change_port ||
-+ (new_serial.baud_base != state->baud_base) ||
-+ (new_serial.type != state->type) ||
-+ (new_serial.close_delay != state->close_delay) ||
-+ (new_serial.xmit_fifo_size != state->xmit_fifo_size) ||
-+ ((new_serial.flags & ~ASYNC_USR_MASK) !=
-+ (state->flags & ~ASYNC_USR_MASK)))
-+ return -EPERM;
-+ state->flags = ((state->flags & ~ASYNC_USR_MASK) |
-+ (new_serial.flags & ASYNC_USR_MASK));
-+ info->flags = ((info->flags & ~ASYNC_USR_MASK) |
-+ (new_serial.flags & ASYNC_USR_MASK));
-+ state->custom_divisor = new_serial.custom_divisor;
-+ goto check_and_exit;
-+ }
-+
-+ new_serial.irq = irq_cannonicalize(new_serial.irq);
-+
-+ if ((new_serial.irq >= NR_IRQS) || (new_serial.irq < 0) ||
-+ (new_serial.baud_base < 9600)|| (new_serial.type < PORT_UNKNOWN) ||
-+ (new_serial.type > PORT_MAX) || (new_serial.type == PORT_CIRRUS) ||
-+ (new_serial.type == PORT_STARTECH)) {
-+ return -EINVAL;
-+ }
-+
-+ if ((new_serial.type != state->type) ||
-+ (new_serial.xmit_fifo_size <= 0))
-+ new_serial.xmit_fifo_size =
-+ uart_config[new_serial.type].dfl_xmit_fifo_size;
-+
-+ /* Make sure address is not already in use */
-+ if (new_serial.type) {
-+ for (i = 0 ; i < NR_PORTS; i++)
-+ if ((state != &rs_table[i]) &&
-+ (rs_table[i].io_type == SERIAL_IO_PORT) &&
-+ (rs_table[i].port == new_port) &&
-+ rs_table[i].type)
-+ return -EADDRINUSE;
-+ }
-+
-+ if ((change_port || change_irq) && (state->count > 1))
-+ return -EBUSY;
-+
-+ /*
-+ * OK, past this point, all the error checking has been done.
-+ * At this point, we start making changes.....
-+ */
-+
-+ state->baud_base = new_serial.baud_base;
-+ state->flags = ((state->flags & ~ASYNC_FLAGS) |
-+ (new_serial.flags & ASYNC_FLAGS));
-+ info->flags = ((state->flags & ~ASYNC_INTERNAL_FLAGS) |
-+ (info->flags & ASYNC_INTERNAL_FLAGS));
-+ state->custom_divisor = new_serial.custom_divisor;
-+ state->close_delay = new_serial.close_delay * HZ/100;
-+ state->closing_wait = new_serial.closing_wait * HZ/100;
-+#if (LINUX_VERSION_CODE > 0x20100)
-+ info->tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
-+#endif
-+ info->xmit_fifo_size = state->xmit_fifo_size =
-+ new_serial.xmit_fifo_size;
-+
-+ if ((state->type != PORT_UNKNOWN) && state->port) {
-+#ifdef CONFIG_SERIAL_RSA
-+ if (old_state.type == PORT_RSA)
-+ release_region(state->port + UART_RSA_BASE, 16);
-+ else
-+#endif
-+ release_region(state->port,8);
-+ }
-+ state->type = new_serial.type;
-+ if (change_port || change_irq) {
-+ /*
-+ * We need to shutdown the serial port at the old
-+ * port/irq combination.
-+ */
-+ shutdown(info);
-+ state->irq = new_serial.irq;
-+ info->port = state->port = new_port;
-+ info->hub6 = state->hub6 = new_serial.hub6;
-+ if (info->hub6)
-+ info->io_type = state->io_type = SERIAL_IO_HUB6;
-+ else if (info->io_type == SERIAL_IO_HUB6)
-+ info->io_type = state->io_type = SERIAL_IO_PORT;
-+ }
-+ if ((state->type != PORT_UNKNOWN) && state->port) {
-+#ifdef CONFIG_SERIAL_RSA
-+ if (state->type == PORT_RSA)
-+ request_region(state->port + UART_RSA_BASE,
-+ 16, "serial_rsa(set)");
-+ else
-+#endif
-+ request_region(state->port,8,"serial(set)");
-+ }
-+
-+
-+check_and_exit:
-+ if ((!state->port && !state->iomem_base) || !state->type)
-+ return 0;
-+ if (info->flags & ASYNC_INITIALIZED) {
-+ if (((old_state.flags & ASYNC_SPD_MASK) !=
-+ (state->flags & ASYNC_SPD_MASK)) ||
-+ (old_state.custom_divisor != state->custom_divisor)) {
-+#if (LINUX_VERSION_CODE >= 131394) /* Linux 2.1.66 */
-+ if ((state->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
-+ info->tty->alt_speed = 57600;
-+ if ((state->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
-+ info->tty->alt_speed = 115200;
-+ if ((state->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
-+ info->tty->alt_speed = 230400;
-+ if ((state->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
-+ info->tty->alt_speed = 460800;
-+#endif
-+ change_speed(info, 0);
-+ }
-+ } else
-+ retval = startup(info);
-+ return retval;
-+}
-+
-+
-+/*
-+ * get_lsr_info - get line status register info
-+ *
-+ * Purpose: Let user call ioctl() to get info when the UART physically
-+ * is emptied. On bus types like RS485, the transmitter must
-+ * release the bus after transmitting. This must be done when
-+ * the transmit shift register is empty, not be done when the
-+ * transmit holding register is empty. This functionality
-+ * allows an RS485 driver to be written in user space.
-+ */
-+static int get_lsr_info(struct async_struct * info, unsigned int *value)
-+{
-+ unsigned char status;
-+ unsigned int result;
-+ unsigned long flags;
-+
-+ save_flags(flags); cli();
-+ status = serial_in(info, UART_LSR);
-+ restore_flags(flags);
-+ result = ((status & UART_LSR_TEMT) ? TIOCSER_TEMT : 0);
-+
-+ /*
-+ * If we're about to load something into the transmit
-+ * register, we'll pretend the transmitter isn't empty to
-+ * avoid a race condition (depending on when the transmit
-+ * interrupt happens).
-+ */
-+ if (info->x_char ||
-+ ((CIRC_CNT(info->xmit.head, info->xmit.tail,
-+ SERIAL_XMIT_SIZE) > 0) &&
-+ !info->tty->stopped && !info->tty->hw_stopped))
-+ result &= ~TIOCSER_TEMT;
-+
-+ if (copy_to_user(value, &result, sizeof(int)))
-+ return -EFAULT;
-+ return 0;
-+}
-+
-+
-+static int get_modem_info(struct async_struct * info, unsigned int *value)
-+{
-+ unsigned char control, status;
-+ unsigned int result;
-+ unsigned long flags;
-+
-+ control = info->MCR;
-+ save_flags(flags); cli();
-+ status = serial_in(info, UART_MSR);
-+ restore_flags(flags);
-+ result = ((control & UART_MCR_RTS) ? TIOCM_RTS : 0)
-+ | ((control & UART_MCR_DTR) ? TIOCM_DTR : 0)
-+#ifdef TIOCM_OUT1
-+ | ((control & UART_MCR_OUT1) ? TIOCM_OUT1 : 0)
-+ | ((control & UART_MCR_OUT2) ? TIOCM_OUT2 : 0)
-+#endif
-+ | ((status & UART_MSR_DCD) ? TIOCM_CAR : 0)
-+ | ((status & UART_MSR_RI) ? TIOCM_RNG : 0)
-+ | ((status & UART_MSR_DSR) ? TIOCM_DSR : 0)
-+ | ((status & UART_MSR_CTS) ? TIOCM_CTS : 0);
-+
-+ if (copy_to_user(value, &result, sizeof(int)))
-+ return -EFAULT;
-+ return 0;
-+}
-+
-+static int set_modem_info(struct async_struct * info, unsigned int cmd,
-+ unsigned int *value)
-+{
-+ unsigned int arg;
-+ unsigned long flags;
-+
-+ if (copy_from_user(&arg, value, sizeof(int)))
-+ return -EFAULT;
-+
-+ switch (cmd) {
-+ case TIOCMBIS:
-+ if (arg & TIOCM_RTS)
-+ info->MCR |= UART_MCR_RTS;
-+ if (arg & TIOCM_DTR)
-+ info->MCR |= UART_MCR_DTR;
-+#ifdef TIOCM_OUT1
-+ if (arg & TIOCM_OUT1)
-+ info->MCR |= UART_MCR_OUT1;
-+ if (arg & TIOCM_OUT2)
-+ info->MCR |= UART_MCR_OUT2;
-+#endif
-+ if (arg & TIOCM_LOOP)
-+ info->MCR |= UART_MCR_LOOP;
-+ break;
-+ case TIOCMBIC:
-+ if (arg & TIOCM_RTS)
-+ info->MCR &= ~UART_MCR_RTS;
-+ if (arg & TIOCM_DTR)
-+ info->MCR &= ~UART_MCR_DTR;
-+#ifdef TIOCM_OUT1
-+ if (arg & TIOCM_OUT1)
-+ info->MCR &= ~UART_MCR_OUT1;
-+ if (arg & TIOCM_OUT2)
-+ info->MCR &= ~UART_MCR_OUT2;
-+#endif
-+ if (arg & TIOCM_LOOP)
-+ info->MCR &= ~UART_MCR_LOOP;
-+ break;
-+ case TIOCMSET:
-+ info->MCR = ((info->MCR & ~(UART_MCR_RTS |
-+#ifdef TIOCM_OUT1
-+ UART_MCR_OUT1 |
-+ UART_MCR_OUT2 |
-+#endif
-+ UART_MCR_LOOP |
-+ UART_MCR_DTR))
-+ | ((arg & TIOCM_RTS) ? UART_MCR_RTS : 0)
-+#ifdef TIOCM_OUT1
-+ | ((arg & TIOCM_OUT1) ? UART_MCR_OUT1 : 0)
-+ | ((arg & TIOCM_OUT2) ? UART_MCR_OUT2 : 0)
-+#endif
-+ | ((arg & TIOCM_LOOP) ? UART_MCR_LOOP : 0)
-+ | ((arg & TIOCM_DTR) ? UART_MCR_DTR : 0));
-+ break;
-+ default:
-+ return -EINVAL;
-+ }
-+ save_flags(flags); cli();
-+ info->MCR |= ALPHA_KLUDGE_MCR; /* Don't ask */
-+ serial_out(info, UART_MCR, info->MCR);
-+ restore_flags(flags);
-+ return 0;
-+}
-+
-+static int do_autoconfig(struct async_struct * info)
-+{
-+ int irq, retval;
-+
-+ if (!capable(CAP_SYS_ADMIN))
-+ return -EPERM;
-+
-+ if (info->state->count > 1)
-+ return -EBUSY;
-+
-+ shutdown(info);
-+
-+ autoconfig(info->state);
-+ if ((info->state->flags & ASYNC_AUTO_IRQ) &&
-+ (info->state->port != 0 || info->state->iomem_base != 0) &&
-+ (info->state->type != PORT_UNKNOWN)) {
-+ irq = detect_uart_irq(info->state);
-+ if (irq > 0)
-+ info->state->irq = irq;
-+ }
-+
-+ retval = startup(info);
-+ if (retval)
-+ return retval;
-+ return 0;
-+}
-+
-+/*
-+ * rs_break() --- routine which turns the break handling on or off
-+ */
-+#if (LINUX_VERSION_CODE < 131394) /* Linux 2.1.66 */
-+static void send_break( struct async_struct * info, int duration)
-+{
-+ if (!CONFIGURED_SERIAL_PORT(info))
-+ return;
-+ current->state = TASK_INTERRUPTIBLE;
-+ current->timeout = jiffies + duration;
-+ cli();
-+ info->LCR |= UART_LCR_SBC;
-+ serial_out(info, UART_LCR, info->LCR);
-+ schedule();
-+ info->LCR &= ~UART_LCR_SBC;
-+ serial_out(info, UART_LCR, info->LCR);
-+ sti();
-+}
-+#else
-+static void rs_break(struct tty_struct *tty, int break_state)
-+{
-+ struct async_struct * info = (struct async_struct *)tty->driver_data;
-+ unsigned long flags;
-+
-+ if (serial_paranoia_check(info, tty->device, "rs_break"))
-+ return;
-+
-+ if (!CONFIGURED_SERIAL_PORT(info))
-+ return;
-+ save_flags(flags); cli();
-+ if (break_state == -1)
-+ info->LCR |= UART_LCR_SBC;
-+ else
-+ info->LCR &= ~UART_LCR_SBC;
-+ serial_out(info, UART_LCR, info->LCR);
-+ restore_flags(flags);
-+}
-+#endif
-+
-+#ifdef CONFIG_SERIAL_MULTIPORT
-+static int get_multiport_struct(struct async_struct * info,
-+ struct serial_multiport_struct *retinfo)
-+{
-+ struct serial_multiport_struct ret;
-+ struct rs_multiport_struct *multi;
-+
-+ multi = &rs_multiport[info->state->irq];
-+
-+ ret.port_monitor = multi->port_monitor;
-+
-+ ret.port1 = multi->port1;
-+ ret.mask1 = multi->mask1;
-+ ret.match1 = multi->match1;
-+
-+ ret.port2 = multi->port2;
-+ ret.mask2 = multi->mask2;
-+ ret.match2 = multi->match2;
-+
-+ ret.port3 = multi->port3;
-+ ret.mask3 = multi->mask3;
-+ ret.match3 = multi->match3;
-+
-+ ret.port4 = multi->port4;
-+ ret.mask4 = multi->mask4;
-+ ret.match4 = multi->match4;
-+
-+ ret.irq = info->state->irq;
-+
-+ if (copy_to_user(retinfo,&ret,sizeof(*retinfo)))
-+ return -EFAULT;
-+ return 0;
-+}
-+
-+static int set_multiport_struct(struct async_struct * info,
-+ struct serial_multiport_struct *in_multi)
-+{
-+ struct serial_multiport_struct new_multi;
-+ struct rs_multiport_struct *multi;
-+ struct serial_state *state;
-+ int was_multi, now_multi;
-+ int retval;
-+ void (*handler)(int, void *, struct pt_regs *);
-+
-+ if (!capable(CAP_SYS_ADMIN))
-+ return -EPERM;
-+ state = info->state;
-+
-+ if (copy_from_user(&new_multi, in_multi,
-+ sizeof(struct serial_multiport_struct)))
-+ return -EFAULT;
-+
-+ if (new_multi.irq != state->irq || state->irq == 0 ||
-+ !IRQ_ports[state->irq])
-+ return -EINVAL;
-+
-+ multi = &rs_multiport[state->irq];
-+ was_multi = (multi->port1 != 0);
-+
-+ multi->port_monitor = new_multi.port_monitor;
-+
-+ if (multi->port1)
-+ release_region(multi->port1,1);
-+ multi->port1 = new_multi.port1;
-+ multi->mask1 = new_multi.mask1;
-+ multi->match1 = new_multi.match1;
-+ if (multi->port1)
-+ request_region(multi->port1,1,"serial(multiport1)");
-+
-+ if (multi->port2)
-+ release_region(multi->port2,1);
-+ multi->port2 = new_multi.port2;
-+ multi->mask2 = new_multi.mask2;
-+ multi->match2 = new_multi.match2;
-+ if (multi->port2)
-+ request_region(multi->port2,1,"serial(multiport2)");
-+
-+ if (multi->port3)
-+ release_region(multi->port3,1);
-+ multi->port3 = new_multi.port3;
-+ multi->mask3 = new_multi.mask3;
-+ multi->match3 = new_multi.match3;
-+ if (multi->port3)
-+ request_region(multi->port3,1,"serial(multiport3)");
-+
-+ if (multi->port4)
-+ release_region(multi->port4,1);
-+ multi->port4 = new_multi.port4;
-+ multi->mask4 = new_multi.mask4;
-+ multi->match4 = new_multi.match4;
-+ if (multi->port4)
-+ request_region(multi->port4,1,"serial(multiport4)");
-+
-+ now_multi = (multi->port1 != 0);
-+
-+ if (IRQ_ports[state->irq]->next_port &&
-+ (was_multi != now_multi)) {
-+ free_irq(state->irq, &IRQ_ports[state->irq]);
-+ if (now_multi)
-+ handler = rs_interrupt_multi;
-+ else
-+ handler = rs_interrupt;
-+
-+ retval = request_irq(state->irq, handler, SA_SHIRQ,
-+ "serial", &IRQ_ports[state->irq]);
-+ if (retval) {
-+ printk("Couldn't reallocate serial interrupt "
-+ "driver!!\n");
-+ }
-+ }
-+ return 0;
-+}
-+#endif
-+
-+static int rs_ioctl(struct tty_struct *tty, struct file * file,
-+ unsigned int cmd, unsigned long arg)
-+{
-+ struct async_struct * info = (struct async_struct *)tty->driver_data;
-+ struct async_icount cprev, cnow; /* kernel counter temps */
-+ struct serial_icounter_struct icount;
-+ unsigned long flags;
-+#if (LINUX_VERSION_CODE < 131394) /* Linux 2.1.66 */
-+ int retval, tmp;
-+#endif
-+
-+ if (serial_paranoia_check(info, tty->device, "rs_ioctl"))
-+ return -ENODEV;
-+
-+ if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
-+ (cmd != TIOCSERCONFIG) && (cmd != TIOCSERGSTRUCT) &&
-+ (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) {
-+ if (tty->flags & (1 << TTY_IO_ERROR))
-+ return -EIO;
-+ }
-+
-+ switch (cmd) {
-+#if (LINUX_VERSION_CODE < 131394) /* Linux 2.1.66 */
-+ case TCSBRK: /* SVID version: non-zero arg --> no break */
-+ retval = tty_check_change(tty);
-+ if (retval)
-+ return retval;
-+ tty_wait_until_sent(tty, 0);
-+ if (signal_pending(current))
-+ return -EINTR;
-+ if (!arg) {
-+ send_break(info, HZ/4); /* 1/4 second */
-+ if (signal_pending(current))
-+ return -EINTR;
-+ }
-+ return 0;
-+ case TCSBRKP: /* support for POSIX tcsendbreak() */
-+ retval = tty_check_change(tty);
-+ if (retval)
-+ return retval;
-+ tty_wait_until_sent(tty, 0);
-+ if (signal_pending(current))
-+ return -EINTR;
-+ send_break(info, arg ? arg*(HZ/10) : HZ/4);
-+ if (signal_pending(current))
-+ return -EINTR;
-+ return 0;
-+ case TIOCGSOFTCAR:
-+ tmp = C_CLOCAL(tty) ? 1 : 0;
-+ if (copy_to_user((void *)arg, &tmp, sizeof(int)))
-+ return -EFAULT;
-+ return 0;
-+ case TIOCSSOFTCAR:
-+ if (copy_from_user(&tmp, (void *)arg, sizeof(int)))
-+ return -EFAULT;
-+
-+ tty->termios->c_cflag =
-+ ((tty->termios->c_cflag & ~CLOCAL) |
-+ (tmp ? CLOCAL : 0));
-+ return 0;
-+#endif
-+ case TIOCMGET:
-+ return get_modem_info(info, (unsigned int *) arg);
-+ case TIOCMBIS:
-+ case TIOCMBIC:
-+ case TIOCMSET:
-+ return set_modem_info(info, cmd, (unsigned int *) arg);
-+ case TIOCGSERIAL:
-+ return get_serial_info(info,
-+ (struct serial_struct *) arg);
-+ case TIOCSSERIAL:
-+ return set_serial_info(info,
-+ (struct serial_struct *) arg);
-+ case TIOCSERCONFIG:
-+ return do_autoconfig(info);
-+
-+ case TIOCSERGETLSR: /* Get line status register */
-+ return get_lsr_info(info, (unsigned int *) arg);
-+
-+ case TIOCSERGSTRUCT:
-+ if (copy_to_user((struct async_struct *) arg,
-+ info, sizeof(struct async_struct)))
-+ return -EFAULT;
-+ return 0;
-+
-+#ifdef CONFIG_SERIAL_MULTIPORT
-+ case TIOCSERGETMULTI:
-+ return get_multiport_struct(info,
-+ (struct serial_multiport_struct *) arg);
-+ case TIOCSERSETMULTI:
-+ return set_multiport_struct(info,
-+ (struct serial_multiport_struct *) arg);
-+#endif
-+
-+ /*
-+ * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change
-+ * - mask passed in arg for lines of interest
-+ * (use |'ed TIOCM_RNG/DSR/CD/CTS for masking)
-+ * Caller should use TIOCGICOUNT to see which one it was
-+ */
-+ case TIOCMIWAIT:
-+ save_flags(flags); cli();
-+ /* note the counters on entry */
-+ cprev = info->state->icount;
-+ restore_flags(flags);
-+ /* Force modem status interrupts on */
-+ info->IER |= UART_IER_MSI;
-+ serial_out(info, UART_IER, info->IER);
-+ while (1) {
-+ interruptible_sleep_on(&info->delta_msr_wait);
-+ /* see if a signal did it */
-+ if (signal_pending(current))
-+ return -ERESTARTSYS;
-+ save_flags(flags); cli();
-+ cnow = info->state->icount; /* atomic copy */
-+ restore_flags(flags);
-+ if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
-+ cnow.dcd == cprev.dcd && cnow.cts == cprev.cts)
-+ return -EIO; /* no change => error */
-+ if ( ((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
-+ ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
-+ ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) ||
-+ ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts)) ) {
-+ return 0;
-+ }
-+ cprev = cnow;
-+ }
-+ /* NOTREACHED */
-+
-+ /*
-+ * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
-+ * Return: write counters to the user passed counter struct
-+ * NB: both 1->0 and 0->1 transitions are counted except for
-+ * RI where only 0->1 is counted.
-+ */
-+ case TIOCGICOUNT:
-+ save_flags(flags); cli();
-+ cnow = info->state->icount;
-+ restore_flags(flags);
-+ icount.cts = cnow.cts;
-+ icount.dsr = cnow.dsr;
-+ icount.rng = cnow.rng;
-+ icount.dcd = cnow.dcd;
-+ icount.rx = cnow.rx;
-+ icount.tx = cnow.tx;
-+ icount.frame = cnow.frame;
-+ icount.overrun = cnow.overrun;
-+ icount.parity = cnow.parity;
-+ icount.brk = cnow.brk;
-+ icount.buf_overrun = cnow.buf_overrun;
-+
-+ if (copy_to_user((void *)arg, &icount, sizeof(icount)))
-+ return -EFAULT;
-+ return 0;
-+ case TIOCSERGWILD:
-+ case TIOCSERSWILD:
-+ /* "setserial -W" is called in Debian boot */
-+ printk ("TIOCSER?WILD ioctl obsolete, ignored.\n");
-+ return 0;
-+
-+ default:
-+ return -ENOIOCTLCMD;
-+ }
-+ return 0;
-+}
-+
-+static void rs_set_termios(struct tty_struct *tty, struct termios *old_termios)
-+{
-+ struct async_struct *info = (struct async_struct *)tty->driver_data;
-+ unsigned long flags;
-+ unsigned int cflag = tty->termios->c_cflag;
-+
-+ if ( (cflag == old_termios->c_cflag)
-+ && ( RELEVANT_IFLAG(tty->termios->c_iflag)
-+ == RELEVANT_IFLAG(old_termios->c_iflag)))
-+ return;
-+
-+ change_speed(info, old_termios);
-+
-+ /* Handle transition to B0 status */
-+ if ((old_termios->c_cflag & CBAUD) &&
-+ !(cflag & CBAUD)) {
-+ info->MCR &= ~(UART_MCR_DTR|UART_MCR_RTS);
-+ save_flags(flags); cli();
-+ serial_out(info, UART_MCR, info->MCR);
-+ restore_flags(flags);
-+ }
-+
-+ /* Handle transition away from B0 status */
-+ if (!(old_termios->c_cflag & CBAUD) &&
-+ (cflag & CBAUD)) {
-+ info->MCR |= UART_MCR_DTR;
-+ if (!(tty->termios->c_cflag & CRTSCTS) ||
-+ !test_bit(TTY_THROTTLED, &tty->flags)) {
-+ info->MCR |= UART_MCR_RTS;
-+ }
-+ save_flags(flags); cli();
-+ serial_out(info, UART_MCR, info->MCR);
-+ restore_flags(flags);
-+ }
-+
-+ /* Handle turning off CRTSCTS */
-+ if ((old_termios->c_cflag & CRTSCTS) &&
-+ !(tty->termios->c_cflag & CRTSCTS)) {
-+ tty->hw_stopped = 0;
-+ rs_start(tty);
-+ }
-+
-+#if 0
-+ /*
-+ * No need to wake up processes in open wait, since they
-+ * sample the CLOCAL flag once, and don't recheck it.
-+ * XXX It's not clear whether the current behavior is correct
-+ * or not. Hence, this may change.....
-+ */
-+ if (!(old_termios->c_cflag & CLOCAL) &&
-+ (tty->termios->c_cflag & CLOCAL))
-+ wake_up_interruptible(&info->open_wait);
-+#endif
-+}
-+
-+/*
-+ * ------------------------------------------------------------
-+ * rs_close()
-+ *
-+ * This routine is called when the serial port gets closed. First, we
-+ * wait for the last remaining data to be sent. Then, we unlink its
-+ * async structure from the interrupt chain if necessary, and we free
-+ * that IRQ if nothing is left in the chain.
-+ * ------------------------------------------------------------
-+ */
-+static void rs_close(struct tty_struct *tty, struct file * filp)
-+{
-+ struct async_struct * info = (struct async_struct *)tty->driver_data;
-+ struct serial_state *state;
-+ unsigned long flags;
-+
-+ if (!info || serial_paranoia_check(info, tty->device, "rs_close"))
-+ return;
-+
-+ state = info->state;
-+
-+ save_flags(flags); cli();
-+
-+ if (tty_hung_up_p(filp)) {
-+ DBG_CNT("before DEC-hung");
-+ MOD_DEC_USE_COUNT;
-+ restore_flags(flags);
-+ return;
-+ }
-+
-+#ifdef SERIAL_DEBUG_OPEN
-+ printk("rs_close ttys%d, count = %d\n", info->line, state->count);
-+#endif
-+ if ((tty->count == 1) && (state->count != 1)) {
-+ /*
-+ * Uh, oh. tty->count is 1, which means that the tty
-+ * structure will be freed. state->count should always
-+ * be one in these conditions. If it's greater than
-+ * one, we've got real problems, since it means the
-+ * serial port won't be shutdown.
-+ */
-+ printk("rs_close: bad serial port count; tty->count is 1, "
-+ "state->count is %d\n", state->count);
-+ state->count = 1;
-+ }
-+ if (--state->count < 0) {
-+ printk("rs_close: bad serial port count for ttys%d: %d\n",
-+ info->line, state->count);
-+ state->count = 0;
-+ }
-+ if (state->count) {
-+ DBG_CNT("before DEC-2");
-+ MOD_DEC_USE_COUNT;
-+ restore_flags(flags);
-+ return;
-+ }
-+ info->flags |= ASYNC_CLOSING;
-+ restore_flags(flags);
-+ /*
-+ * Save the termios structure, since this port may have
-+ * separate termios for callout and dialin.
-+ */
-+ if (info->flags & ASYNC_NORMAL_ACTIVE)
-+ info->state->normal_termios = *tty->termios;
-+ if (info->flags & ASYNC_CALLOUT_ACTIVE)
-+ info->state->callout_termios = *tty->termios;
-+ /*
-+ * Now we wait for the transmit buffer to clear; and we notify
-+ * the line discipline to only process XON/XOFF characters.
-+ */
-+ tty->closing = 1;
-+ if (state->closing_wait != ASYNC_CLOSING_WAIT_NONE)
-+ tty_wait_until_sent(tty, state->closing_wait);
-+ /*
-+ * At this point we stop accepting input. To do this, we
-+ * disable the receive line status interrupts, and tell the
-+ * interrupt driver to stop checking the data ready bit in the
-+ * line status register.
-+ */
-+ info->IER &= ~UART_IER_RLSI;
-+ info->read_status_mask &= ~UART_LSR_DR;
-+ if (info->flags & ASYNC_INITIALIZED) {
-+ serial_out(info, UART_IER, info->IER);
-+ /*
-+ * Before we drop DTR, make sure the UART transmitter
-+ * has completely drained; this is especially
-+ * important if there is a transmit FIFO!
-+ */
-+ rs_wait_until_sent(tty, info->timeout);
-+ }
-+ shutdown(info);
-+ if (tty->driver.flush_buffer)
-+ tty->driver.flush_buffer(tty);
-+ tty_ldisc_flush(tty);
-+ tty->closing = 0;
-+ info->event = 0;
-+ info->tty = 0;
-+ if (info->blocked_open) {
-+ if (state->close_delay) {
-+ set_current_state(TASK_INTERRUPTIBLE);
-+ schedule_timeout(state->close_delay);
-+ }
-+ wake_up_interruptible(&info->open_wait);
-+ }
-+ info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CALLOUT_ACTIVE|
-+ ASYNC_CLOSING);
-+ wake_up_interruptible(&info->close_wait);
-+ MOD_DEC_USE_COUNT;
-+}
-+
-+/*
-+ * rs_wait_until_sent() --- wait until the transmitter is empty
-+ */
-+static void rs_wait_until_sent(struct tty_struct *tty, int timeout)
-+{
-+ struct async_struct * info = (struct async_struct *)tty->driver_data;
-+ unsigned long orig_jiffies, char_time;
-+ int lsr;
-+
-+ if (serial_paranoia_check(info, tty->device, "rs_wait_until_sent"))
-+ return;
-+
-+ if (info->state->type == PORT_UNKNOWN)
-+ return;
-+
-+ if (info->xmit_fifo_size == 0)
-+ return; /* Just in case.... */
-+
-+ orig_jiffies = jiffies;
-+ /*
-+ * Set the check interval to be 1/5 of the estimated time to
-+ * send a single character, and make it at least 1. The check
-+ * interval should also be less than the timeout.
-+ *
-+ * Note: we have to use pretty tight timings here to satisfy
-+ * the NIST-PCTS.
-+ */
-+ char_time = (info->timeout - HZ/50) / info->xmit_fifo_size;
-+ char_time = char_time / 5;
-+ if (char_time == 0)
-+ char_time = 1;
-+ if (timeout && timeout < char_time)
-+ char_time = timeout;
-+ /*
-+ * If the transmitter hasn't cleared in twice the approximate
-+ * amount of time to send the entire FIFO, it probably won't
-+ * ever clear. This assumes the UART isn't doing flow
-+ * control, which is currently the case. Hence, if it ever
-+ * takes longer than info->timeout, this is probably due to a
-+ * UART bug of some kind. So, we clamp the timeout parameter at
-+ * 2*info->timeout.
-+ */
-+ if (!timeout || timeout > 2*info->timeout)
-+ timeout = 2*info->timeout;
-+#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
-+ printk("In rs_wait_until_sent(%d) check=%lu...", timeout, char_time);
-+ printk("jiff=%lu...", jiffies);
-+#endif
-+ while (!((lsr = serial_inp(info, UART_LSR)) & UART_LSR_TEMT)) {
-+#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
-+ printk("lsr = %d (jiff=%lu)...", lsr, jiffies);
-+#endif
-+ set_current_state(TASK_INTERRUPTIBLE);
-+ schedule_timeout(char_time);
-+ if (signal_pending(current))
-+ break;
-+ if (timeout && time_after(jiffies, orig_jiffies + timeout))
-+ break;
-+ }
-+#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
-+ printk("lsr = %d (jiff=%lu)...done\n", lsr, jiffies);
-+#endif
-+}
-+
-+/*
-+ * rs_hangup() --- called by tty_hangup() when a hangup is signaled.
-+ */
-+static void rs_hangup(struct tty_struct *tty)
-+{
-+ struct async_struct * info = (struct async_struct *)tty->driver_data;
-+ struct serial_state *state = info->state;
-+
-+ if (serial_paranoia_check(info, tty->device, "rs_hangup"))
-+ return;
-+
-+ state = info->state;
-+
-+ rs_flush_buffer(tty);
-+ if (info->flags & ASYNC_CLOSING)
-+ return;
-+ shutdown(info);
-+ info->event = 0;
-+ state->count = 0;
-+ info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CALLOUT_ACTIVE);
-+ info->tty = 0;
-+ wake_up_interruptible(&info->open_wait);
-+}
-+
-+/*
-+ * ------------------------------------------------------------
-+ * rs_open() and friends
-+ * ------------------------------------------------------------
-+ */
-+static int block_til_ready(struct tty_struct *tty, struct file * filp,
-+ struct async_struct *info)
-+{
-+ DECLARE_WAITQUEUE(wait, current);
-+ struct serial_state *state = info->state;
-+ int retval;
-+ int do_clocal = 0, extra_count = 0;
-+ unsigned long flags;
-+
-+ /*
-+ * If the device is in the middle of being closed, then block
-+ * until it's done, and then try again.
-+ */
-+ if (tty_hung_up_p(filp) ||
-+ (info->flags & ASYNC_CLOSING)) {
-+ if (info->flags & ASYNC_CLOSING)
-+ interruptible_sleep_on(&info->close_wait);
-+#ifdef SERIAL_DO_RESTART
-+ return ((info->flags & ASYNC_HUP_NOTIFY) ?
-+ -EAGAIN : -ERESTARTSYS);
-+#else
-+ return -EAGAIN;
-+#endif
-+ }
-+
-+ /*
-+ * If this is a callout device, then just make sure the normal
-+ * device isn't being used.
-+ */
-+ if (tty->driver.subtype == SERIAL_TYPE_CALLOUT) {
-+ if (info->flags & ASYNC_NORMAL_ACTIVE)
-+ return -EBUSY;
-+ if ((info->flags & ASYNC_CALLOUT_ACTIVE) &&
-+ (info->flags & ASYNC_SESSION_LOCKOUT) &&
-+ (info->session != current->session))
-+ return -EBUSY;
-+ if ((info->flags & ASYNC_CALLOUT_ACTIVE) &&
-+ (info->flags & ASYNC_PGRP_LOCKOUT) &&
-+ (info->pgrp != current->pgrp))
-+ return -EBUSY;
-+ info->flags |= ASYNC_CALLOUT_ACTIVE;
-+ return 0;
-+ }
-+
-+ /*
-+ * If non-blocking mode is set, or the port is not enabled,
-+ * then make the check up front and then exit.
-+ */
-+ if ((filp->f_flags & O_NONBLOCK) ||
-+ (tty->flags & (1 << TTY_IO_ERROR))) {
-+ if (info->flags & ASYNC_CALLOUT_ACTIVE)
-+ return -EBUSY;
-+ info->flags |= ASYNC_NORMAL_ACTIVE;
-+ return 0;
-+ }
-+
-+ if (info->flags & ASYNC_CALLOUT_ACTIVE) {
-+ if (state->normal_termios.c_cflag & CLOCAL)
-+ do_clocal = 1;
-+ } else {
-+ if (tty->termios->c_cflag & CLOCAL)
-+ do_clocal = 1;
-+ }
-+
-+ /*
-+ * Block waiting for the carrier detect and the line to become
-+ * free (i.e., not in use by the callout). While we are in
-+ * this loop, state->count is dropped by one, so that
-+ * rs_close() knows when to free things. We restore it upon
-+ * exit, either normal or abnormal.
-+ */
-+ retval = 0;
-+ add_wait_queue(&info->open_wait, &wait);
-+#ifdef SERIAL_DEBUG_OPEN
-+ printk("block_til_ready before block: ttys%d, count = %d\n",
-+ state->line, state->count);
-+#endif
-+ save_flags(flags); cli();
-+ if (!tty_hung_up_p(filp)) {
-+ extra_count = 1;
-+ state->count--;
-+ }
-+ restore_flags(flags);
-+ info->blocked_open++;
-+ while (1) {
-+ save_flags(flags); cli();
-+ if (!(info->flags & ASYNC_CALLOUT_ACTIVE) &&
-+ (tty->termios->c_cflag & CBAUD))
-+ serial_out(info, UART_MCR,
-+ serial_inp(info, UART_MCR) |
-+ (UART_MCR_DTR | UART_MCR_RTS));
-+ restore_flags(flags);
-+ set_current_state(TASK_INTERRUPTIBLE);
-+ if (tty_hung_up_p(filp) ||
-+ !(info->flags & ASYNC_INITIALIZED)) {
-+#ifdef SERIAL_DO_RESTART
-+ if (info->flags & ASYNC_HUP_NOTIFY)
-+ retval = -EAGAIN;
-+ else
-+ retval = -ERESTARTSYS;
-+#else
-+ retval = -EAGAIN;
-+#endif
-+ break;
-+ }
-+ if (!(info->flags & ASYNC_CALLOUT_ACTIVE) &&
-+ !(info->flags & ASYNC_CLOSING) &&
-+ (do_clocal || (serial_in(info, UART_MSR) &
-+ UART_MSR_DCD)))
-+ break;
-+ if (signal_pending(current)) {
-+ retval = -ERESTARTSYS;
-+ break;
-+ }
-+#ifdef SERIAL_DEBUG_OPEN
-+ printk("block_til_ready blocking: ttys%d, count = %d\n",
-+ info->line, state->count);
-+#endif
-+ schedule();
-+ }
-+ set_current_state(TASK_RUNNING);
-+ remove_wait_queue(&info->open_wait, &wait);
-+ if (extra_count)
-+ state->count++;
-+ info->blocked_open--;
-+#ifdef SERIAL_DEBUG_OPEN
-+ printk("block_til_ready after blocking: ttys%d, count = %d\n",
-+ info->line, state->count);
-+#endif
-+ if (retval)
-+ return retval;
-+ info->flags |= ASYNC_NORMAL_ACTIVE;
-+ return 0;
-+}
-+
-+static int get_async_struct(int line, struct async_struct **ret_info)
-+{
-+ struct async_struct *info;
-+ struct serial_state *sstate;
-+
-+ sstate = rs_table + line;
-+ sstate->count++;
-+ if (sstate->info) {
-+ *ret_info = sstate->info;
-+ return 0;
-+ }
-+ info = kmalloc(sizeof(struct async_struct), GFP_KERNEL);
-+ if (!info) {
-+ sstate->count--;
-+ return -ENOMEM;
-+ }
-+ memset(info, 0, sizeof(struct async_struct));
-+ init_waitqueue_head(&info->open_wait);
-+ init_waitqueue_head(&info->close_wait);
-+ init_waitqueue_head(&info->delta_msr_wait);
-+ info->magic = SERIAL_MAGIC;
-+ info->port = sstate->port;
-+ info->flags = sstate->flags;
-+ info->io_type = sstate->io_type;
-+ info->iomem_base = sstate->iomem_base;
-+ info->iomem_reg_shift = sstate->iomem_reg_shift;
-+ info->xmit_fifo_size = sstate->xmit_fifo_size;
-+ info->line = line;
-+ info->tqueue.routine = do_softint;
-+ info->tqueue.data = info;
-+ info->state = sstate;
-+ if (sstate->info) {
-+ kfree(info);
-+ *ret_info = sstate->info;
-+ return 0;
-+ }
-+ *ret_info = sstate->info = info;
-+ return 0;
-+}
-+
-+/*
-+ * This routine is called whenever a serial port is opened. It
-+ * enables interrupts for a serial port, linking in its async structure into
-+ * the IRQ chain. It also performs the serial-specific
-+ * initialization for the tty structure.
-+ *
-+ * Note that on failure, we don't decrement the module use count - the tty
-+ * later will call rs_close, which will decrement it for us as long as
-+ * tty->driver_data is set non-NULL. --rmk
-+ */
-+static int rs_open(struct tty_struct *tty, struct file * filp)
-+{
-+ struct async_struct *info;
-+ int retval, line;
-+ unsigned long page;
-+
-+ MOD_INC_USE_COUNT;
-+ line = MINOR(tty->device) - tty->driver.minor_start;
-+ if ((line < 0) || (line >= NR_PORTS)) {
-+ MOD_DEC_USE_COUNT;
-+ return -ENODEV;
-+ }
-+ retval = get_async_struct(line, &info);
-+ if (retval) {
-+ MOD_DEC_USE_COUNT;
-+ return retval;
-+ }
-+ tty->driver_data = info;
-+ info->tty = tty;
-+ if (serial_paranoia_check(info, tty->device, "rs_open"))
-+ return -ENODEV;
-+
-+#ifdef SERIAL_DEBUG_OPEN
-+ printk("rs_open %s%d, count = %d\n", tty->driver.name, info->line,
-+ info->state->count);
-+#endif
-+#if (LINUX_VERSION_CODE > 0x20100)
-+ info->tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
-+#endif
-+
-+ /*
-+ * This relies on lock_kernel() stuff so wants tidying for 2.5
-+ */
-+ if (!tmp_buf) {
-+ page = get_zeroed_page(GFP_KERNEL);
-+ if (!page)
-+ return -ENOMEM;
-+ if (tmp_buf)
-+ free_page(page);
-+ else
-+ tmp_buf = (unsigned char *) page;
-+ }
-+
-+ /*
-+ * If the port is the middle of closing, bail out now
-+ */
-+ if (tty_hung_up_p(filp) ||
-+ (info->flags & ASYNC_CLOSING)) {
-+ if (info->flags & ASYNC_CLOSING)
-+ interruptible_sleep_on(&info->close_wait);
-+#ifdef SERIAL_DO_RESTART
-+ return ((info->flags & ASYNC_HUP_NOTIFY) ?
-+ -EAGAIN : -ERESTARTSYS);
-+#else
-+ return -EAGAIN;
-+#endif
-+ }
-+
-+ /*
-+ * Start up serial port
-+ */
-+ retval = startup(info);
-+ if (retval)
-+ return retval;
-+
-+ retval = block_til_ready(tty, filp, info);
-+ if (retval) {
-+#ifdef SERIAL_DEBUG_OPEN
-+ printk("rs_open returning after block_til_ready with %d\n",
-+ retval);
-+#endif
-+ return retval;
-+ }
-+
-+ if ((info->state->count == 1) &&
-+ (info->flags & ASYNC_SPLIT_TERMIOS)) {
-+ if (tty->driver.subtype == SERIAL_TYPE_NORMAL)
-+ *tty->termios = info->state->normal_termios;
-+ else
-+ *tty->termios = info->state->callout_termios;
-+ change_speed(info, 0);
-+ }
-+#ifdef CONFIG_SERIAL_CONSOLE
-+ if (sercons.cflag && sercons.index == line) {
-+ tty->termios->c_cflag = sercons.cflag;
-+ sercons.cflag = 0;
-+ change_speed(info, 0);
-+ }
-+#endif
-+ info->session = current->session;
-+ info->pgrp = current->pgrp;
-+
-+#ifdef SERIAL_DEBUG_OPEN
-+ printk("rs_open ttys%d successful...", info->line);
-+#endif
-+ return 0;
-+}
-+
-+/*
-+ * /proc fs routines....
-+ */
-+
-+static inline int line_info(char *buf, struct serial_state *state)
-+{
-+ struct async_struct *info = state->info, scr_info;
-+ char stat_buf[30], control, status;
-+ int ret;
-+ unsigned long flags;
-+
-+ /*
-+ * Return zero characters for ports not claimed by driver.
-+ */
-+ if (state->type == PORT_UNKNOWN) {
-+ return 0; /* ignore unused ports */
-+ }
-+
-+ ret = sprintf(buf, "%d: uart:%s port:%lX irq:%d",
-+ state->line, uart_config[state->type].name,
-+ (state->port ? state->port : (long)state->iomem_base),
-+ state->irq);
-+
-+ /*
-+ * Figure out the current RS-232 lines
-+ */
-+ if (!info) {
-+ info = &scr_info; /* This is just for serial_{in,out} */
-+
-+ info->magic = SERIAL_MAGIC;
-+ info->port = state->port;
-+ info->flags = state->flags;
-+ info->hub6 = state->hub6;
-+ info->io_type = state->io_type;
-+ info->iomem_base = state->iomem_base;
-+ info->iomem_reg_shift = state->iomem_reg_shift;
-+ info->quot = 0;
-+ info->tty = 0;
-+ }
-+ save_flags(flags); cli();
-+ status = serial_in(info, UART_MSR);
-+ control = info != &scr_info ? info->MCR : serial_in(info, UART_MCR);
-+ restore_flags(flags);
-+
-+ stat_buf[0] = 0;
-+ stat_buf[1] = 0;
-+ if (control & UART_MCR_RTS)
-+ strcat(stat_buf, "|RTS");
-+ if (status & UART_MSR_CTS)
-+ strcat(stat_buf, "|CTS");
-+ if (control & UART_MCR_DTR)
-+ strcat(stat_buf, "|DTR");
-+ if (status & UART_MSR_DSR)
-+ strcat(stat_buf, "|DSR");
-+ if (status & UART_MSR_DCD)
-+ strcat(stat_buf, "|CD");
-+ if (status & UART_MSR_RI)
-+ strcat(stat_buf, "|RI");
-+
-+ if (info->quot) {
-+ ret += sprintf(buf+ret, " baud:%d",
-+ state->baud_base / info->quot);
-+ }
-+
-+ ret += sprintf(buf+ret, " tx:%d rx:%d",
-+ state->icount.tx, state->icount.rx);
-+
-+ if (state->icount.frame)
-+ ret += sprintf(buf+ret, " fe:%d", state->icount.frame);
-+
-+ if (state->icount.parity)
-+ ret += sprintf(buf+ret, " pe:%d", state->icount.parity);
-+
-+ if (state->icount.brk)
-+ ret += sprintf(buf+ret, " brk:%d", state->icount.brk);
-+
-+ if (state->icount.overrun)
-+ ret += sprintf(buf+ret, " oe:%d", state->icount.overrun);
-+
-+ /*
-+ * Last thing is the RS-232 status lines
-+ */
-+ ret += sprintf(buf+ret, " %s\n", stat_buf+1);
-+ return ret;
-+}
-+
-+static int rs_read_proc(char *page, char **start, off_t off, int count,
-+ int *eof, void *data)
-+{
-+ int i, len = 0, l;
-+ off_t begin = 0;
-+
-+ len += sprintf(page, "serinfo:1.0 driver:%s%s revision:%s\n",
-+ serial_version, LOCAL_VERSTRING, serial_revdate);
-+ for (i = 0; i < NR_PORTS && len < 4000; i++) {
-+ l = line_info(page + len, &rs_table[i]);
-+ len += l;
-+ if (len+begin > off+count)
-+ goto done;
-+ if (len+begin < off) {
-+ begin += len;
-+ len = 0;
-+ }
-+ }
-+ *eof = 1;
-+done:
-+ if (off >= len+begin)
-+ return 0;
-+ *start = page + (off-begin);
-+ return ((count < begin+len-off) ? count : begin+len-off);
-+}
-+
-+/*
-+ * ---------------------------------------------------------------------
-+ * rs_init() and friends
-+ *
-+ * rs_init() is called at boot-time to initialize the serial driver.
-+ * ---------------------------------------------------------------------
-+ */
-+
-+/*
-+ * This routine prints out the appropriate serial driver version
-+ * number, and identifies which options were configured into this
-+ * driver.
-+ */
-+static char serial_options[] __initdata =
-+#ifdef CONFIG_HUB6
-+ " HUB-6"
-+#define SERIAL_OPT
-+#endif
-+#ifdef CONFIG_SERIAL_MANY_PORTS
-+ " MANY_PORTS"
-+#define SERIAL_OPT
-+#endif
-+#ifdef CONFIG_SERIAL_MULTIPORT
-+ " MULTIPORT"
-+#define SERIAL_OPT
-+#endif
-+#ifdef CONFIG_SERIAL_SHARE_IRQ
-+ " SHARE_IRQ"
-+#define SERIAL_OPT
-+#endif
-+#ifdef CONFIG_SERIAL_DETECT_IRQ
-+ " DETECT_IRQ"
-+#define SERIAL_OPT
-+#endif
-+#ifdef ENABLE_SERIAL_PCI
-+ " SERIAL_PCI"
-+#define SERIAL_OPT
-+#endif
-+#ifdef ENABLE_SERIAL_PNP
-+ " ISAPNP"
-+#define SERIAL_OPT
-+#endif
-+#ifdef ENABLE_SERIAL_ACPI
-+ " SERIAL_ACPI"
-+#define SERIAL_OPT
-+#endif
-+#ifdef SERIAL_OPT
-+ " enabled\n";
-+#else
-+ " no serial options enabled\n";
-+#endif
-+#undef SERIAL_OPT
-+
-+static _INLINE_ void show_serial_version(void)
-+{
-+ printk(KERN_INFO "%s version %s%s (%s) with%s", serial_name,
-+ serial_version, LOCAL_VERSTRING, serial_revdate,
-+ serial_options);
-+}
-+
-+/*
-+ * This routine detect the IRQ of a serial port by clearing OUT2 when
-+ * no UART interrupt are requested (IER = 0) (*GPL*). This seems to work at
-+ * each time, as long as no other device permanently request the IRQ.
-+ * If no IRQ is detected, or multiple IRQ appear, this function returns 0.
-+ * The variable "state" and the field "state->port" should not be null.
-+ */
-+static unsigned detect_uart_irq (struct serial_state * state)
-+{
-+ int irq;
-+ unsigned long irqs;
-+ unsigned char save_mcr, save_ier;
-+ struct async_struct scr_info; /* serial_{in,out} because HUB6 */
-+
-+#ifdef CONFIG_SERIAL_MANY_PORTS
-+ unsigned char save_ICP=0; /* no warning */
-+ unsigned short ICP=0;
-+
-+ if (state->flags & ASYNC_FOURPORT) {
-+ ICP = (state->port & 0xFE0) | 0x01F;
-+ save_ICP = inb_p(ICP);
-+ outb_p(0x80, ICP);
-+ (void) inb_p(ICP);
-+ }
-+#endif
-+ scr_info.magic = SERIAL_MAGIC;
-+ scr_info.state = state;
-+ scr_info.port = state->port;
-+ scr_info.flags = state->flags;
-+#ifdef CONFIG_HUB6
-+ scr_info.hub6 = state->hub6;
-+#endif
-+ scr_info.io_type = state->io_type;
-+ scr_info.iomem_base = state->iomem_base;
-+ scr_info.iomem_reg_shift = state->iomem_reg_shift;
-+
-+ /* forget possible initially masked and pending IRQ */
-+ probe_irq_off(probe_irq_on());
-+ save_mcr = serial_inp(&scr_info, UART_MCR);
-+ save_ier = serial_inp(&scr_info, UART_IER);
-+ serial_outp(&scr_info, UART_MCR, UART_MCR_OUT1 | UART_MCR_OUT2);
-+
-+ irqs = probe_irq_on();
-+ serial_outp(&scr_info, UART_MCR, 0);
-+ udelay (10);
-+ if (state->flags & ASYNC_FOURPORT) {
-+ serial_outp(&scr_info, UART_MCR,
-+ UART_MCR_DTR | UART_MCR_RTS);
-+ } else {
-+ serial_outp(&scr_info, UART_MCR,
-+ UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2);
-+ }
-+ serial_outp(&scr_info, UART_IER, 0x0f); /* enable all intrs */
-+ (void)serial_inp(&scr_info, UART_LSR);
-+ (void)serial_inp(&scr_info, UART_RX);
-+ (void)serial_inp(&scr_info, UART_IIR);
-+ (void)serial_inp(&scr_info, UART_MSR);
-+ serial_outp(&scr_info, UART_TX, 0xFF);
-+ udelay (20);
-+ irq = probe_irq_off(irqs);
-+
-+ serial_outp(&scr_info, UART_MCR, save_mcr);
-+ serial_outp(&scr_info, UART_IER, save_ier);
-+#ifdef CONFIG_SERIAL_MANY_PORTS
-+ if (state->flags & ASYNC_FOURPORT)
-+ outb_p(save_ICP, ICP);
-+#endif
-+ return (irq > 0)? irq : 0;
-+}
-+
-+/*
-+ * This is a quickie test to see how big the FIFO is.
-+ * It doesn't work at all the time, more's the pity.
-+ */
-+static int size_fifo(struct async_struct *info)
-+{
-+ unsigned char old_fcr, old_mcr, old_dll, old_dlm;
-+ int count;
-+
-+ old_fcr = serial_inp(info, UART_FCR);
-+ old_mcr = serial_inp(info, UART_MCR);
-+ serial_outp(info, UART_FCR, UART_FCR_ENABLE_FIFO |
-+ UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
-+ serial_outp(info, UART_MCR, UART_MCR_LOOP);
-+ serial_outp(info, UART_LCR, UART_LCR_DLAB);
-+ old_dll = serial_inp(info, UART_DLL);
-+ old_dlm = serial_inp(info, UART_DLM);
-+ serial_outp(info, UART_DLL, 0x01);
-+ serial_outp(info, UART_DLM, 0x00);
-+ serial_outp(info, UART_LCR, 0x03);
-+ for (count = 0; count < 256; count++)
-+ serial_outp(info, UART_TX, count);
-+ mdelay(20);
-+ for (count = 0; (serial_inp(info, UART_LSR) & UART_LSR_DR) &&
-+ (count < 256); count++)
-+ serial_inp(info, UART_RX);
-+ serial_outp(info, UART_FCR, old_fcr);
-+ serial_outp(info, UART_MCR, old_mcr);
-+ serial_outp(info, UART_LCR, UART_LCR_DLAB);
-+ serial_outp(info, UART_DLL, old_dll);
-+ serial_outp(info, UART_DLM, old_dlm);
-+
-+ return count;
-+}
-+
-+/*
-+ * This is a helper routine to autodetect StarTech/Exar/Oxsemi UART's.
-+ * When this function is called we know it is at least a StarTech
-+ * 16650 V2, but it might be one of several StarTech UARTs, or one of
-+ * its clones. (We treat the broken original StarTech 16650 V1 as a
-+ * 16550, and why not? Startech doesn't seem to even acknowledge its
-+ * existence.)
-+ *
-+ * What evil have men's minds wrought...
-+ */
-+static void autoconfig_startech_uarts(struct async_struct *info,
-+ struct serial_state *state,
-+ unsigned long flags)
-+{
-+ unsigned char scratch, scratch2, scratch3, scratch4;
-+
-+ /*
-+ * First we check to see if it's an Oxford Semiconductor UART.
-+ *
-+ * If we have to do this here because some non-National
-+ * Semiconductor clone chips lock up if you try writing to the
-+ * LSR register (which serial_icr_read does)
-+ */
-+ if (state->type == PORT_16550A) {
-+ /*
-+ * EFR [4] must be set else this test fails
-+ *
-+ * This shouldn't be necessary, but Mike Hudson
-+ * (Exoray@isys.ca) claims that it's needed for 952
-+ * dual UART's (which are not recommended for new designs).
-+ */
-+ info->ACR = 0;
-+ serial_out(info, UART_LCR, 0xBF);
-+ serial_out(info, UART_EFR, 0x10);
-+ serial_out(info, UART_LCR, 0x00);
-+ /* Check for Oxford Semiconductor 16C950 */
-+ scratch = serial_icr_read(info, UART_ID1);
-+ scratch2 = serial_icr_read(info, UART_ID2);
-+ scratch3 = serial_icr_read(info, UART_ID3);
-+
-+ if (scratch == 0x16 && scratch2 == 0xC9 &&
-+ (scratch3 == 0x50 || scratch3 == 0x52 ||
-+ scratch3 == 0x54)) {
-+ state->type = PORT_16C950;
-+ state->revision = serial_icr_read(info, UART_REV) |
-+ (scratch3 << 8);
-+ return;
-+ }
-+ }
-+
-+ /*
-+ * We check for a XR16C850 by setting DLL and DLM to 0, and
-+ * then reading back DLL and DLM. If DLM reads back 0x10,
-+ * then the UART is a XR16C850 and the DLL contains the chip
-+ * revision. If DLM reads back 0x14, then the UART is a
-+ * XR16C854.
-+ *
-+ */
-+
-+ /* Save the DLL and DLM */
-+
-+ serial_outp(info, UART_LCR, UART_LCR_DLAB);
-+ scratch3 = serial_inp(info, UART_DLL);
-+ scratch4 = serial_inp(info, UART_DLM);
-+
-+ serial_outp(info, UART_DLL, 0);
-+ serial_outp(info, UART_DLM, 0);
-+ scratch2 = serial_inp(info, UART_DLL);
-+ scratch = serial_inp(info, UART_DLM);
-+ serial_outp(info, UART_LCR, 0);
-+
-+ if (scratch == 0x10 || scratch == 0x14) {
-+ if (scratch == 0x10)
-+ state->revision = scratch2;
-+ state->type = PORT_16850;
-+ return;
-+ }
-+
-+ /* Restore the DLL and DLM */
-+
-+ serial_outp(info, UART_LCR, UART_LCR_DLAB);
-+ serial_outp(info, UART_DLL, scratch3);
-+ serial_outp(info, UART_DLM, scratch4);
-+ serial_outp(info, UART_LCR, 0);
-+ /*
-+ * We distinguish between the '654 and the '650 by counting
-+ * how many bytes are in the FIFO. I'm using this for now,
-+ * since that's the technique that was sent to me in the
-+ * serial driver update, but I'm not convinced this works.
-+ * I've had problems doing this in the past. -TYT
-+ */
-+ if (size_fifo(info) == 64)
-+ state->type = PORT_16654;
-+ else
-+ state->type = PORT_16650V2;
-+}
-+
-+/*
-+ * This routine is called by rs_init() to initialize a specific serial
-+ * port. It determines what type of UART chip this serial port is
-+ * using: 8250, 16450, 16550, 16550A. The important question is
-+ * whether or not this UART is a 16550A or not, since this will
-+ * determine whether or not we can use its FIFO features or not.
-+ */
-+static void autoconfig(struct serial_state * state)
-+{
-+ unsigned char status1, status2, scratch, scratch2, scratch3;
-+ unsigned char save_lcr, save_mcr;
-+ struct async_struct *info, scr_info;
-+ unsigned long flags;
-+
-+ state->type = PORT_UNKNOWN;
-+
-+#ifdef SERIAL_DEBUG_AUTOCONF
-+ printk("Testing ttyS%d (0x%04lx, 0x%04x)...\n", state->line,
-+ state->port, (unsigned) state->iomem_base);
-+#endif
-+
-+ if (!CONFIGURED_SERIAL_PORT(state))
-+ return;
-+
-+ info = &scr_info; /* This is just for serial_{in,out} */
-+
-+ info->magic = SERIAL_MAGIC;
-+ info->state = state;
-+ info->port = state->port;
-+ info->flags = state->flags;
-+#ifdef CONFIG_HUB6
-+ info->hub6 = state->hub6;
-+#endif
-+ info->io_type = state->io_type;
-+ info->iomem_base = state->iomem_base;
-+ info->iomem_reg_shift = state->iomem_reg_shift;
-+
-+ save_flags(flags); cli();
-+
-+ if (!(state->flags & ASYNC_BUGGY_UART) &&
-+ !state->iomem_base) {
-+ /*
-+ * Do a simple existence test first; if we fail this,
-+ * there's no point trying anything else.
-+ *
-+ * 0x80 is used as a nonsense port to prevent against
-+ * false positives due to ISA bus float. The
-+ * assumption is that 0x80 is a non-existent port;
-+ * which should be safe since include/asm/io.h also
-+ * makes this assumption.
-+ */
-+ scratch = serial_inp(info, UART_IER);
-+ serial_outp(info, UART_IER, 0);
-+#ifdef __i386__
-+ outb(0xff, 0x080);
-+#endif
-+ scratch2 = serial_inp(info, UART_IER);
-+ serial_outp(info, UART_IER, 0x0F);
-+#ifdef __i386__
-+ outb(0, 0x080);
-+#endif
-+ scratch3 = serial_inp(info, UART_IER);
-+ serial_outp(info, UART_IER, scratch);
-+ if (scratch2 || scratch3 != 0x0F) {
-+#ifdef SERIAL_DEBUG_AUTOCONF
-+ printk("serial: ttyS%d: simple autoconfig failed "
-+ "(%02x, %02x)\n", state->line,
-+ scratch2, scratch3);
-+#endif
-+ restore_flags(flags);
-+ return; /* We failed; there's nothing here */
-+ }
-+ }
-+
-+ save_mcr = serial_in(info, UART_MCR);
-+ save_lcr = serial_in(info, UART_LCR);
-+
-+ /*
-+ * Check to see if a UART is really there. Certain broken
-+ * internal modems based on the Rockwell chipset fail this
-+ * test, because they apparently don't implement the loopback
-+ * test mode. So this test is skipped on the COM 1 through
-+ * COM 4 ports. This *should* be safe, since no board
-+ * manufacturer would be stupid enough to design a board
-+ * that conflicts with COM 1-4 --- we hope!
-+ */
-+ if (!(state->flags & ASYNC_SKIP_TEST)) {
-+ serial_outp(info, UART_MCR, UART_MCR_LOOP | 0x0A);
-+ status1 = serial_inp(info, UART_MSR) & 0xF0;
-+ serial_outp(info, UART_MCR, save_mcr);
-+ if (status1 != 0x90) {
-+#ifdef SERIAL_DEBUG_AUTOCONF
-+ printk("serial: ttyS%d: no UART loopback failed\n",
-+ state->line);
-+#endif
-+ restore_flags(flags);
-+ return;
-+ }
-+ }
-+ serial_outp(info, UART_LCR, 0xBF); /* set up for StarTech test */
-+ serial_outp(info, UART_EFR, 0); /* EFR is the same as FCR */
-+ serial_outp(info, UART_LCR, 0);
-+ serial_outp(info, UART_FCR, UART_FCR_ENABLE_FIFO);
-+ scratch = serial_in(info, UART_IIR) >> 6;
-+ switch (scratch) {
-+ case 0:
-+ state->type = PORT_16450;
-+ break;
-+ case 1:
-+ state->type = PORT_UNKNOWN;
-+ break;
-+ case 2:
-+ state->type = PORT_16550;
-+ break;
-+ case 3:
-+ state->type = PORT_16550A;
-+ break;
-+ }
-+ if (state->type == PORT_16550A) {
-+ /* Check for Startech UART's */
-+ serial_outp(info, UART_LCR, UART_LCR_DLAB);
-+ if (serial_in(info, UART_EFR) == 0) {
-+ serial_outp(info, UART_EFR, 0xA8);
-+ if (serial_in(info, UART_EFR) == 0) {
-+ /* We are a NS16552D/Motorola
-+ * 8xxx DUART, stop. */
-+ goto out;
-+ }
-+ state->type = PORT_16650;
-+ serial_outp(info, UART_EFR, 0);
-+ } else {
-+ serial_outp(info, UART_LCR, 0xBF);
-+ if (serial_in(info, UART_EFR) == 0)
-+ autoconfig_startech_uarts(info, state, flags);
-+ }
-+ }
-+ if (state->type == PORT_16550A) {
-+ /* Check for TI 16750 */
-+ serial_outp(info, UART_LCR, save_lcr | UART_LCR_DLAB);
-+ serial_outp(info, UART_FCR,
-+ UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE);
-+ scratch = serial_in(info, UART_IIR) >> 5;
-+ if (scratch == 7) {
-+ /*
-+ * If this is a 16750, and not a cheap UART
-+ * clone, then it should only go into 64 byte
-+ * mode if the UART_FCR7_64BYTE bit was set
-+ * while UART_LCR_DLAB was latched.
-+ */
-+ serial_outp(info, UART_FCR, UART_FCR_ENABLE_FIFO);
-+ serial_outp(info, UART_LCR, 0);
-+ serial_outp(info, UART_FCR,
-+ UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE);
-+ scratch = serial_in(info, UART_IIR) >> 5;
-+ if (scratch == 6)
-+ state->type = PORT_16750;
-+ }
-+ serial_outp(info, UART_FCR, UART_FCR_ENABLE_FIFO);
-+ }
-+#if defined(CONFIG_SERIAL_RSA) && defined(MODULE)
-+ if (state->type == PORT_16550A) {
-+ int i;
-+
-+ for (i = 0 ; i < PORT_RSA_MAX ; ++i) {
-+ if (!probe_rsa[i] && !force_rsa[i])
-+ break;
-+ if (((probe_rsa[i] != state->port) ||
-+ check_region(state->port + UART_RSA_BASE, 16)) &&
-+ (force_rsa[i] != state->port))
-+ continue;
-+ if (!enable_rsa(info))
-+ continue;
-+ state->type = PORT_RSA;
-+ state->baud_base = SERIAL_RSA_BAUD_BASE;
-+ break;
-+ }
-+ }
-+#endif
-+out:
-+ serial_outp(info, UART_LCR, save_lcr);
-+ if (state->type == PORT_16450) {
-+ scratch = serial_in(info, UART_SCR);
-+ serial_outp(info, UART_SCR, 0xa5);
-+ status1 = serial_in(info, UART_SCR);
-+ serial_outp(info, UART_SCR, 0x5a);
-+ status2 = serial_in(info, UART_SCR);
-+ serial_outp(info, UART_SCR, scratch);
-+
-+ if ((status1 != 0xa5) || (status2 != 0x5a))
-+ state->type = PORT_8250;
-+ }
-+ state->xmit_fifo_size = uart_config[state->type].dfl_xmit_fifo_size;
-+
-+ if (state->type == PORT_UNKNOWN) {
-+ restore_flags(flags);
-+ return;
-+ }
-+
-+ if (info->port) {
-+#ifdef CONFIG_SERIAL_RSA
-+ if (state->type == PORT_RSA)
-+ request_region(info->port + UART_RSA_BASE, 16,
-+ "serial_rsa(auto)");
-+ else
-+#endif
-+ request_region(info->port,8,"serial(auto)");
-+ }
-+
-+ /*
-+ * Reset the UART.
-+ */
-+#ifdef CONFIG_SERIAL_RSA
-+ if (state->type == PORT_RSA)
-+ serial_outp(info, UART_RSA_FRR, 0);
-+#endif
-+ serial_outp(info, UART_MCR, save_mcr);
-+ serial_outp(info, UART_FCR, (UART_FCR_ENABLE_FIFO |
-+ UART_FCR_CLEAR_RCVR |
-+ UART_FCR_CLEAR_XMIT));
-+ serial_outp(info, UART_FCR, 0);
-+ (void)serial_in(info, UART_RX);
-+ serial_outp(info, UART_IER, 0);
-+
-+ restore_flags(flags);
-+}
-+
-+int register_serial(struct serial_struct *req);
-+void unregister_serial(int line);
-+
-+#if (LINUX_VERSION_CODE > 0x20100)
-+EXPORT_SYMBOL(register_serial);
-+EXPORT_SYMBOL(unregister_serial);
-+#else
-+static struct symbol_table serial_syms = {
-+#include <linux/symtab_begin.h>
-+ X(register_serial),
-+ X(unregister_serial),
-+#include <linux/symtab_end.h>
-+};
-+#endif
-+
-+
-+#if defined(ENABLE_SERIAL_PCI) || defined(ENABLE_SERIAL_PNP)
-+
-+static void __devinit printk_pnp_dev_id(unsigned short vendor,
-+ unsigned short device)
-+{
-+ printk("%c%c%c%x%x%x%x",
-+ 'A' + ((vendor >> 2) & 0x3f) - 1,
-+ 'A' + (((vendor & 3) << 3) | ((vendor >> 13) & 7)) - 1,
-+ 'A' + ((vendor >> 8) & 0x1f) - 1,
-+ (device >> 4) & 0x0f,
-+ device & 0x0f,
-+ (device >> 12) & 0x0f,
-+ (device >> 8) & 0x0f);
-+}
-+
-+static _INLINE_ int get_pci_port(struct pci_dev *dev,
-+ struct pci_board *board,
-+ struct serial_struct *req,
-+ int idx)
-+{
-+ unsigned long port;
-+ int base_idx;
-+ int max_port;
-+ int offset;
-+
-+ base_idx = SPCI_FL_GET_BASE(board->flags);
-+ if (board->flags & SPCI_FL_BASE_TABLE)
-+ base_idx += idx;
-+
-+ if (board->flags & SPCI_FL_REGION_SZ_CAP) {
-+ max_port = pci_resource_len(dev, base_idx) / 8;
-+ if (idx >= max_port)
-+ return 1;
-+ }
-+
-+ offset = board->first_uart_offset;
-+
-+ /* Timedia/SUNIX uses a mixture of BARs and offsets */
-+ /* Ugh, this is ugly as all hell --- TYT */
-+ if(dev->vendor == PCI_VENDOR_ID_TIMEDIA ) /* 0x1409 */
-+ switch(idx) {
-+ case 0: base_idx=0;
-+ break;
-+ case 1: base_idx=0; offset=8;
-+ break;
-+ case 2: base_idx=1;
-+ break;
-+ case 3: base_idx=1; offset=8;
-+ break;
-+ case 4: /* BAR 2*/
-+ case 5: /* BAR 3 */
-+ case 6: /* BAR 4*/
-+ case 7: base_idx=idx-2; /* BAR 5*/
-+ }
-+
-+ /* Some Titan cards are also a little weird */
-+ if (dev->vendor == PCI_VENDOR_ID_TITAN &&
-+ (dev->device == PCI_DEVICE_ID_TITAN_400L ||
-+ dev->device == PCI_DEVICE_ID_TITAN_800L)) {
-+ switch (idx) {
-+ case 0: base_idx = 1;
-+ break;
-+ case 1: base_idx = 2;
-+ break;
-+ default:
-+ base_idx = 4;
-+ offset = 8 * (idx - 2);
-+ }
-+
-+ }
-+
-+ /* HP's Diva chip puts the 4th/5th serial port further out, and
-+ * some serial ports are supposed to be hidden on certain models.
-+ */
-+ if (dev->vendor == PCI_VENDOR_ID_HP &&
-+ dev->device == PCI_DEVICE_ID_HP_SAS) {
-+ switch (dev->subsystem_device) {
-+ case 0x104B: /* Maestro */
-+ if (idx == 3) idx++;
-+ break;
-+ case 0x1282: /* Everest / Longs Peak */
-+ if (idx > 0) idx++;
-+ if (idx > 2) idx++;
-+ break;
-+ }
-+ if (idx > 2) {
-+ offset = 0x18;
-+ }
-+ }
-+
-+ port = pci_resource_start(dev, base_idx) + offset;
-+
-+ if ((board->flags & SPCI_FL_BASE_TABLE) == 0)
-+ port += idx * (board->uart_offset ? board->uart_offset : 8);
-+
-+ if (IS_PCI_REGION_IOPORT(dev, base_idx)) {
-+ req->port = port;
-+ if (HIGH_BITS_OFFSET)
-+ req->port_high = port >> HIGH_BITS_OFFSET;
-+ else
-+ req->port_high = 0;
-+ return 0;
-+ }
-+ req->io_type = SERIAL_IO_MEM;
-+ req->iomem_base = ioremap(port, board->uart_offset);
-+ req->iomem_reg_shift = board->reg_shift;
-+ req->port = 0;
-+ return 0;
-+}
-+
-+static _INLINE_ int get_pci_irq(struct pci_dev *dev,
-+ struct pci_board *board,
-+ int idx)
-+{
-+ int base_idx;
-+
-+ if ((board->flags & SPCI_FL_IRQRESOURCE) == 0)
-+ return dev->irq;
-+
-+ base_idx = SPCI_FL_GET_IRQBASE(board->flags);
-+ if (board->flags & SPCI_FL_IRQ_TABLE)
-+ base_idx += idx;
-+
-+ return PCI_IRQ_RESOURCE(dev, base_idx);
-+}
-+
-+/*
-+ * Common enabler code shared by both PCI and ISAPNP probes
-+ */
-+static void __devinit start_pci_pnp_board(struct pci_dev *dev,
-+ struct pci_board *board)
-+{
-+ int k, line;
-+ struct serial_struct serial_req;
-+ int base_baud;
-+
-+ if (PREPARE_FUNC(dev) && (PREPARE_FUNC(dev))(dev) < 0) {
-+ printk("serial: PNP device '");
-+ printk_pnp_dev_id(dev->vendor, dev->device);
-+ printk("' prepare failed\n");
-+ return;
-+ }
-+
-+ if (ACTIVATE_FUNC(dev) && (ACTIVATE_FUNC(dev))(dev) < 0) {
-+ printk("serial: PNP device '");
-+ printk_pnp_dev_id(dev->vendor, dev->device);
-+ printk("' activate failed\n");
-+ return;
-+ }
-+
-+ /*
-+ * Run the initialization function, if any
-+ */
-+ if (board->init_fn && ((board->init_fn)(dev, board, 1) != 0))
-+ return;
-+
-+ /*
-+ * Register the serial board in the array if we need to
-+ * shutdown the board on a module unload or card removal
-+ */
-+ if (DEACTIVATE_FUNC(dev) || board->init_fn) {
-+ for (k=0; k < NR_PCI_BOARDS; k++)
-+ if (serial_pci_board[k].dev == 0)
-+ break;
-+ if (k >= NR_PCI_BOARDS)
-+ return;
-+ serial_pci_board[k].board = *board;
-+ serial_pci_board[k].dev = dev;
-+ }
-+
-+ base_baud = board->base_baud;
-+ if (!base_baud)
-+ base_baud = BASE_BAUD;
-+ memset(&serial_req, 0, sizeof(serial_req));
-+
-+ for (k=0; k < board->num_ports; k++) {
-+ serial_req.irq = get_pci_irq(dev, board, k);
-+ if (get_pci_port(dev, board, &serial_req, k))
-+ break;
-+ serial_req.flags = ASYNC_SKIP_TEST | ASYNC_AUTOPROBE;
-+#ifdef SERIAL_DEBUG_PCI
-+ printk("Setup PCI/PNP port: port %x, irq %d, type %d\n",
-+ serial_req.port, serial_req.irq, serial_req.io_type);
-+#endif
-+ line = register_serial(&serial_req);
-+ if (line < 0)
-+ break;
-+ rs_table[line].baud_base = base_baud;
-+ rs_table[line].dev = dev;
-+ }
-+}
-+#endif /* ENABLE_SERIAL_PCI || ENABLE_SERIAL_PNP */
-+
-+#ifdef ENABLE_SERIAL_PCI
-+/*
-+ * Some PCI serial cards using the PLX 9050 PCI interface chip require
-+ * that the card interrupt be explicitly enabled or disabled. This
-+ * seems to be mainly needed on card using the PLX which also use I/O
-+ * mapped memory.
-+ */
-+static int __devinit
-+pci_plx9050_fn(struct pci_dev *dev, struct pci_board *board, int enable)
-+{
-+ u8 data, *p, irq_config;
-+ int pci_config;
-+
-+ irq_config = 0x41;
-+ pci_config = PCI_COMMAND_MEMORY;
-+ if (dev->vendor == PCI_VENDOR_ID_PANACOM)
-+ irq_config = 0x43;
-+ if ((dev->vendor == PCI_VENDOR_ID_PLX) &&
-+ (dev->device == PCI_DEVICE_ID_PLX_ROMULUS)) {
-+ /*
-+ * As the megawolf cards have the int pins active
-+ * high, and have 2 UART chips, both ints must be
-+ * enabled on the 9050. Also, the UARTS are set in
-+ * 16450 mode by default, so we have to enable the
-+ * 16C950 'enhanced' mode so that we can use the deep
-+ * FIFOs
-+ */
-+ irq_config = 0x5b;
-+ pci_config = PCI_COMMAND_MEMORY | PCI_COMMAND_IO;
-+ }
-+
-+ pci_read_config_byte(dev, PCI_COMMAND, &data);
-+
-+ if (enable)
-+ pci_write_config_byte(dev, PCI_COMMAND,
-+ data | pci_config);
-+
-+ /* enable/disable interrupts */
-+ p = ioremap(pci_resource_start(dev, 0), 0x80);
-+ writel(enable ? irq_config : 0x00, (unsigned long)p + 0x4c);
-+ iounmap(p);
-+
-+ if (!enable)
-+ pci_write_config_byte(dev, PCI_COMMAND,
-+ data & ~pci_config);
-+ return 0;
-+}
-+
-+
-+/*
-+ * SIIG serial cards have an PCI interface chip which also controls
-+ * the UART clocking frequency. Each UART can be clocked independently
-+ * (except cards equiped with 4 UARTs) and initial clocking settings
-+ * are stored in the EEPROM chip. It can cause problems because this
-+ * version of serial driver doesn't support differently clocked UART's
-+ * on single PCI card. To prevent this, initialization functions set
-+ * high frequency clocking for all UART's on given card. It is safe (I
-+ * hope) because it doesn't touch EEPROM settings to prevent conflicts
-+ * with other OSes (like M$ DOS).
-+ *
-+ * SIIG support added by Andrey Panin <pazke@mail.tp.ru>, 10/1999
-+ *
-+ * There is two family of SIIG serial cards with different PCI
-+ * interface chip and different configuration methods:
-+ * - 10x cards have control registers in IO and/or memory space;
-+ * - 20x cards have control registers in standard PCI configuration space.
-+ *
-+ * SIIG initialization functions exported for use by parport_serial.c module.
-+ */
-+
-+#define PCI_DEVICE_ID_SIIG_1S_10x (PCI_DEVICE_ID_SIIG_1S_10x_550 & 0xfffc)
-+#define PCI_DEVICE_ID_SIIG_2S_10x (PCI_DEVICE_ID_SIIG_2S_10x_550 & 0xfff8)
-+
-+int __devinit
-+pci_siig10x_fn(struct pci_dev *dev, struct pci_board *board, int enable)
-+{
-+ u16 data, *p;
-+
-+ if (!enable) return 0;
-+
-+ p = ioremap(pci_resource_start(dev, 0), 0x80);
-+
-+ switch (dev->device & 0xfff8) {
-+ case PCI_DEVICE_ID_SIIG_1S_10x: /* 1S */
-+ data = 0xffdf;
-+ break;
-+ case PCI_DEVICE_ID_SIIG_2S_10x: /* 2S, 2S1P */
-+ data = 0xf7ff;
-+ break;
-+ default: /* 1S1P, 4S */
-+ data = 0xfffb;
-+ break;
-+ }
-+
-+ writew(readw((unsigned long) p + 0x28) & data, (unsigned long) p + 0x28);
-+ iounmap(p);
-+ return 0;
-+}
-+EXPORT_SYMBOL(pci_siig10x_fn);
-+
-+#define PCI_DEVICE_ID_SIIG_2S_20x (PCI_DEVICE_ID_SIIG_2S_20x_550 & 0xfffc)
-+#define PCI_DEVICE_ID_SIIG_2S1P_20x (PCI_DEVICE_ID_SIIG_2S1P_20x_550 & 0xfffc)
-+
-+int __devinit
-+pci_siig20x_fn(struct pci_dev *dev, struct pci_board *board, int enable)
-+{
-+ u8 data;
-+
-+ if (!enable) return 0;
-+
-+ /* Change clock frequency for the first UART. */
-+ pci_read_config_byte(dev, 0x6f, &data);
-+ pci_write_config_byte(dev, 0x6f, data & 0xef);
-+
-+ /* If this card has 2 UART, we have to do the same with second UART. */
-+ if (((dev->device & 0xfffc) == PCI_DEVICE_ID_SIIG_2S_20x) ||
-+ ((dev->device & 0xfffc) == PCI_DEVICE_ID_SIIG_2S1P_20x)) {
-+ pci_read_config_byte(dev, 0x73, &data);
-+ pci_write_config_byte(dev, 0x73, data & 0xef);
-+ }
-+ return 0;
-+}
-+EXPORT_SYMBOL(pci_siig20x_fn);
-+
-+/* Added for EKF Intel i960 serial boards */
-+static int __devinit
-+pci_inteli960ni_fn(struct pci_dev *dev,
-+ struct pci_board *board,
-+ int enable)
-+{
-+ unsigned long oldval;
-+
-+ if (!(pci_get_subdevice(dev) & 0x1000))
-+ return(-1);
-+
-+ if (!enable) /* is there something to deinit? */
-+ return(0);
-+
-+#ifdef SERIAL_DEBUG_PCI
-+ printk(KERN_DEBUG " Subsystem ID %lx (intel 960)\n",
-+ (unsigned long) board->subdevice);
-+#endif
-+ /* is firmware started? */
-+ pci_read_config_dword(dev, 0x44, (void*) &oldval);
-+ if (oldval == 0x00001000L) { /* RESET value */
-+ printk(KERN_DEBUG "Local i960 firmware missing");
-+ return(-1);
-+ }
-+ return(0);
-+}
-+
-+/*
-+ * Timedia has an explosion of boards, and to avoid the PCI table from
-+ * growing *huge*, we use this function to collapse some 70 entries
-+ * in the PCI table into one, for sanity's and compactness's sake.
-+ */
-+static unsigned short timedia_single_port[] = {
-+ 0x4025, 0x4027, 0x4028, 0x5025, 0x5027, 0 };
-+static unsigned short timedia_dual_port[] = {
-+ 0x0002, 0x4036, 0x4037, 0x4038, 0x4078, 0x4079, 0x4085,
-+ 0x4088, 0x4089, 0x5037, 0x5078, 0x5079, 0x5085, 0x6079,
-+ 0x7079, 0x8079, 0x8137, 0x8138, 0x8237, 0x8238, 0x9079,
-+ 0x9137, 0x9138, 0x9237, 0x9238, 0xA079, 0xB079, 0xC079,
-+ 0xD079, 0 };
-+static unsigned short timedia_quad_port[] = {
-+ 0x4055, 0x4056, 0x4095, 0x4096, 0x5056, 0x8156, 0x8157,
-+ 0x8256, 0x8257, 0x9056, 0x9156, 0x9157, 0x9158, 0x9159,
-+ 0x9256, 0x9257, 0xA056, 0xA157, 0xA158, 0xA159, 0xB056,
-+ 0xB157, 0 };
-+static unsigned short timedia_eight_port[] = {
-+ 0x4065, 0x4066, 0x5065, 0x5066, 0x8166, 0x9066, 0x9166,
-+ 0x9167, 0x9168, 0xA066, 0xA167, 0xA168, 0 };
-+static struct timedia_struct {
-+ int num;
-+ unsigned short *ids;
-+} timedia_data[] = {
-+ { 1, timedia_single_port },
-+ { 2, timedia_dual_port },
-+ { 4, timedia_quad_port },
-+ { 8, timedia_eight_port },
-+ { 0, 0 }
-+};
-+
-+static int __devinit
-+pci_timedia_fn(struct pci_dev *dev, struct pci_board *board, int enable)
-+{
-+ int i, j;
-+ unsigned short *ids;
-+
-+ if (!enable)
-+ return 0;
-+
-+ for (i=0; timedia_data[i].num; i++) {
-+ ids = timedia_data[i].ids;
-+ for (j=0; ids[j]; j++) {
-+ if (pci_get_subdevice(dev) == ids[j]) {
-+ board->num_ports = timedia_data[i].num;
-+ return 0;
-+ }
-+ }
-+ }
-+ return 0;
-+}
-+
-+/*
-+ * HP's Remote Management Console. The Diva chip came in several
-+ * different versions. N-class, L2000 and A500 have two Diva chips, each
-+ * with 3 UARTs (the third UART on the second chip is unused). Superdome
-+ * and Keystone have one Diva chip with 3 UARTs. Some later machines have
-+ * one Diva chip, but it has been expanded to 5 UARTs.
-+ */
-+static int __devinit
-+pci_hp_diva(struct pci_dev *dev, struct pci_board *board, int enable)
-+{
-+ if (!enable)
-+ return 0;
-+
-+ switch (dev->subsystem_device) {
-+ case 0x1049: /* Prelude Diva 1 */
-+ case 0x1223: /* Superdome */
-+ case 0x1226: /* Keystone */
-+ case 0x1282: /* Everest / Longs Peak */
-+ board->num_ports = 3;
-+ break;
-+ case 0x104A: /* Prelude Diva 2 */
-+ board->num_ports = 2;
-+ break;
-+ case 0x104B: /* Maestro */
-+ board->num_ports = 4;
-+ break;
-+ case 0x1227: /* Powerbar */
-+ board->num_ports = 1;
-+ break;
-+ }
-+
-+ return 0;
-+}
-+
-+static int __devinit
-+pci_xircom_fn(struct pci_dev *dev, struct pci_board *board, int enable)
-+{
-+ __set_current_state(TASK_UNINTERRUPTIBLE);
-+ schedule_timeout(HZ/10);
-+ return 0;
-+}
-+
-+/*
-+ * This is the configuration table for all of the PCI serial boards
-+ * which we support. It is directly indexed by the pci_board_num_t enum
-+ * value, which is encoded in the pci_device_id PCI probe table's
-+ * driver_data member.
-+ */
-+enum pci_board_num_t {
-+ pbn_b0_1_115200,
-+ pbn_default = 0,
-+
-+ pbn_b0_2_115200,
-+ pbn_b0_4_115200,
-+
-+ pbn_b0_1_921600,
-+ pbn_b0_2_921600,
-+ pbn_b0_4_921600,
-+
-+ pbn_b0_bt_1_115200,
-+ pbn_b0_bt_2_115200,
-+ pbn_b0_bt_1_460800,
-+ pbn_b0_bt_2_460800,
-+ pbn_b0_bt_2_921600,
-+
-+ pbn_b1_1_115200,
-+ pbn_b1_2_115200,
-+ pbn_b1_4_115200,
-+ pbn_b1_8_115200,
-+
-+ pbn_b1_2_921600,
-+ pbn_b1_4_921600,
-+ pbn_b1_8_921600,
-+
-+ pbn_b1_2_1382400,
-+ pbn_b1_4_1382400,
-+ pbn_b1_8_1382400,
-+
-+ pbn_b2_1_115200,
-+ pbn_b2_8_115200,
-+ pbn_b2_4_460800,
-+ pbn_b2_8_460800,
-+ pbn_b2_16_460800,
-+ pbn_b2_4_921600,
-+ pbn_b2_8_921600,
-+
-+ pbn_b2_bt_1_115200,
-+ pbn_b2_bt_2_115200,
-+ pbn_b2_bt_4_115200,
-+ pbn_b2_bt_2_921600,
-+
-+ pbn_panacom,
-+ pbn_panacom2,
-+ pbn_panacom4,
-+ pbn_plx_romulus,
-+ pbn_oxsemi,
-+ pbn_timedia,
-+ pbn_intel_i960,
-+ pbn_sgi_ioc3,
-+ pbn_hp_diva,
-+#ifdef CONFIG_DDB5074
-+ pbn_nec_nile4,
-+#endif
-+
-+ pbn_dci_pccom4,
-+ pbn_dci_pccom8,
-+
-+ pbn_xircom_combo,
-+
-+ pbn_siig10x_0,
-+ pbn_siig10x_1,
-+ pbn_siig10x_2,
-+ pbn_siig10x_4,
-+ pbn_siig20x_0,
-+ pbn_siig20x_2,
-+ pbn_siig20x_4,
-+
-+ pbn_computone_4,
-+ pbn_computone_6,
-+ pbn_computone_8,
-+};
-+
-+static struct pci_board pci_boards[] __devinitdata = {
-+ /*
-+ * PCI Flags, Number of Ports, Base (Maximum) Baud Rate,
-+ * Offset to get to next UART's registers,
-+ * Register shift to use for memory-mapped I/O,
-+ * Initialization function, first UART offset
-+ */
-+
-+ /* Generic serial board, pbn_b0_1_115200, pbn_default */
-+ { SPCI_FL_BASE0, 1, 115200 }, /* pbn_b0_1_115200,
-+ pbn_default */
-+
-+ { SPCI_FL_BASE0, 2, 115200 }, /* pbn_b0_2_115200 */
-+ { SPCI_FL_BASE0, 4, 115200 }, /* pbn_b0_4_115200 */
-+
-+ { SPCI_FL_BASE0, 1, 921600 }, /* pbn_b0_1_921600 */
-+ { SPCI_FL_BASE0, 2, 921600 }, /* pbn_b0_2_921600 */
-+ { SPCI_FL_BASE0, 4, 921600 }, /* pbn_b0_4_921600 */
-+
-+ { SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 1, 115200 }, /* pbn_b0_bt_1_115200 */
-+ { SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 2, 115200 }, /* pbn_b0_bt_2_115200 */
-+ { SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 1, 460800 }, /* pbn_b0_bt_1_460800 */
-+ { SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 2, 460800 }, /* pbn_b0_bt_2_460800 */
-+ { SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 2, 921600 }, /* pbn_b0_bt_2_921600 */
-+
-+ { SPCI_FL_BASE1, 1, 115200 }, /* pbn_b1_1_115200 */
-+ { SPCI_FL_BASE1, 2, 115200 }, /* pbn_b1_2_115200 */
-+ { SPCI_FL_BASE1, 4, 115200 }, /* pbn_b1_4_115200 */
-+ { SPCI_FL_BASE1, 8, 115200 }, /* pbn_b1_8_115200 */
-+
-+ { SPCI_FL_BASE1, 2, 921600 }, /* pbn_b1_2_921600 */
-+ { SPCI_FL_BASE1, 4, 921600 }, /* pbn_b1_4_921600 */
-+ { SPCI_FL_BASE1, 8, 921600 }, /* pbn_b1_8_921600 */
-+
-+ { SPCI_FL_BASE1, 2, 1382400 }, /* pbn_b1_2_1382400 */
-+ { SPCI_FL_BASE1, 4, 1382400 }, /* pbn_b1_4_1382400 */
-+ { SPCI_FL_BASE1, 8, 1382400 }, /* pbn_b1_8_1382400 */
-+
-+ { SPCI_FL_BASE2, 1, 115200 }, /* pbn_b2_1_115200 */
-+ { SPCI_FL_BASE2, 8, 115200 }, /* pbn_b2_8_115200 */
-+ { SPCI_FL_BASE2, 4, 460800 }, /* pbn_b2_4_460800 */
-+ { SPCI_FL_BASE2, 8, 460800 }, /* pbn_b2_8_460800 */
-+ { SPCI_FL_BASE2, 16, 460800 }, /* pbn_b2_16_460800 */
-+ { SPCI_FL_BASE2, 4, 921600 }, /* pbn_b2_4_921600 */
-+ { SPCI_FL_BASE2, 8, 921600 }, /* pbn_b2_8_921600 */
-+
-+ { SPCI_FL_BASE2 | SPCI_FL_BASE_TABLE, 1, 115200 }, /* pbn_b2_bt_1_115200 */
-+ { SPCI_FL_BASE2 | SPCI_FL_BASE_TABLE, 2, 115200 }, /* pbn_b2_bt_2_115200 */
-+ { SPCI_FL_BASE2 | SPCI_FL_BASE_TABLE, 4, 115200 }, /* pbn_b2_bt_4_115200 */
-+ { SPCI_FL_BASE2 | SPCI_FL_BASE_TABLE, 2, 921600 }, /* pbn_b2_bt_2_921600 */
-+
-+ { SPCI_FL_BASE2, 2, 921600, /* IOMEM */ /* pbn_panacom */
-+ 0x400, 7, pci_plx9050_fn },
-+ { SPCI_FL_BASE2 | SPCI_FL_BASE_TABLE, 2, 921600, /* pbn_panacom2 */
-+ 0x400, 7, pci_plx9050_fn },
-+ { SPCI_FL_BASE2 | SPCI_FL_BASE_TABLE, 4, 921600, /* pbn_panacom4 */
-+ 0x400, 7, pci_plx9050_fn },
-+ { SPCI_FL_BASE2, 4, 921600, /* pbn_plx_romulus */
-+ 0x20, 2, pci_plx9050_fn, 0x03 },
-+ /* This board uses the size of PCI Base region 0 to
-+ * signal now many ports are available */
-+ { SPCI_FL_BASE0 | SPCI_FL_REGION_SZ_CAP, 32, 115200 }, /* pbn_oxsemi */
-+ { SPCI_FL_BASE_TABLE, 1, 921600, /* pbn_timedia */
-+ 0, 0, pci_timedia_fn },
-+ /* EKF addition for i960 Boards form EKF with serial port */
-+ { SPCI_FL_BASE0, 32, 921600, /* max 256 ports */ /* pbn_intel_i960 */
-+ 8<<2, 2, pci_inteli960ni_fn, 0x10000},
-+ { SPCI_FL_BASE0 | SPCI_FL_IRQRESOURCE, /* pbn_sgi_ioc3 */
-+ 1, 458333, 0, 0, 0, 0x20178 },
-+ { SPCI_FL_BASE0, 5, 115200, 8, 0, pci_hp_diva, 0}, /* pbn_hp_diva */
-+#ifdef CONFIG_DDB5074
-+ /*
-+ * NEC Vrc-5074 (Nile 4) builtin UART.
-+ * Conditionally compiled in since this is a motherboard device.
-+ */
-+ { SPCI_FL_BASE0, 1, 520833, /* pbn_nec_nile4 */
-+ 64, 3, NULL, 0x300 },
-+#endif
-+
-+ {SPCI_FL_BASE3, 4, 115200, 8}, /* pbn_dci_pccom4 */
-+ {SPCI_FL_BASE3, 8, 115200, 8}, /* pbn_dci_pccom8 */
-+
-+ { SPCI_FL_BASE0, 1, 115200, /* pbn_xircom_combo */
-+ 0, 0, pci_xircom_fn },
-+
-+ { SPCI_FL_BASE2, 1, 460800, /* pbn_siig10x_0 */
-+ 0, 0, pci_siig10x_fn },
-+ { SPCI_FL_BASE2, 1, 921600, /* pbn_siig10x_1 */
-+ 0, 0, pci_siig10x_fn },
-+ { SPCI_FL_BASE2 | SPCI_FL_BASE_TABLE, 2, 921600, /* pbn_siig10x_2 */
-+ 0, 0, pci_siig10x_fn },
-+ { SPCI_FL_BASE2 | SPCI_FL_BASE_TABLE, 4, 921600, /* pbn_siig10x_4 */
-+ 0, 0, pci_siig10x_fn },
-+ { SPCI_FL_BASE0, 1, 921600, /* pbn_siix20x_0 */
-+ 0, 0, pci_siig20x_fn },
-+ { SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 2, 921600, /* pbn_siix20x_2 */
-+ 0, 0, pci_siig20x_fn },
-+ { SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 4, 921600, /* pbn_siix20x_4 */
-+ 0, 0, pci_siig20x_fn },
-+
-+ { SPCI_FL_BASE0, 4, 921600, /* IOMEM */ /* pbn_computone_4 */
-+ 0x40, 2, NULL, 0x200 },
-+ { SPCI_FL_BASE0, 6, 921600, /* IOMEM */ /* pbn_computone_6 */
-+ 0x40, 2, NULL, 0x200 },
-+ { SPCI_FL_BASE0, 8, 921600, /* IOMEM */ /* pbn_computone_8 */
-+ 0x40, 2, NULL, 0x200 },
-+};
-+
-+/*
-+ * Given a complete unknown PCI device, try to use some heuristics to
-+ * guess what the configuration might be, based on the pitiful PCI
-+ * serial specs. Returns 0 on success, 1 on failure.
-+ */
-+static int __devinit serial_pci_guess_board(struct pci_dev *dev,
-+ struct pci_board *board)
-+{
-+ int num_iomem = 0, num_port = 0, first_port = -1;
-+ int i;
-+
-+ /*
-+ * If it is not a communications device or the programming
-+ * interface is greater than 6, give up.
-+ *
-+ * (Should we try to make guesses for multiport serial devices
-+ * later?)
-+ */
-+ if ((((dev->class >> 8) != PCI_CLASS_COMMUNICATION_SERIAL) &&
-+ ((dev->class >> 8) != PCI_CLASS_COMMUNICATION_MODEM)) ||
-+ (dev->class & 0xff) > 6)
-+ return 1;
-+
-+ for (i=0; i < 6; i++) {
-+ if (IS_PCI_REGION_IOPORT(dev, i)) {
-+ num_port++;
-+ if (first_port == -1)
-+ first_port = i;
-+ }
-+ if (IS_PCI_REGION_IOMEM(dev, i))
-+ num_iomem++;
-+ }
-+
-+ /*
-+ * If there is 1 or 0 iomem regions, and exactly one port, use
-+ * it.
-+ */
-+ if (num_iomem <= 1 && num_port == 1) {
-+ board->flags = first_port;
-+ return 0;
-+ }
-+ return 1;
-+}
-+
-+static int __devinit serial_init_one(struct pci_dev *dev,
-+ const struct pci_device_id *ent)
-+{
-+ struct pci_board *board, tmp;
-+ int rc;
-+
-+ board = &pci_boards[ent->driver_data];
-+
-+ rc = pci_enable_device(dev);
-+ if (rc) return rc;
-+
-+ if (ent->driver_data == pbn_default &&
-+ serial_pci_guess_board(dev, board))
-+ return -ENODEV;
-+ else if (serial_pci_guess_board(dev, &tmp) == 0) {
-+ printk(KERN_INFO "Redundant entry in serial pci_table. "
-+ "Please send the output of\n"
-+ "lspci -vv, this message (%04x,%04x,%04x,%04x)\n"
-+ "and the manufacturer and name of "
-+ "serial board or modem board\n"
-+ "to serial-pci-info@lists.sourceforge.net.\n",
-+ dev->vendor, dev->device,
-+ pci_get_subvendor(dev), pci_get_subdevice(dev));
-+ }
-+
-+ start_pci_pnp_board(dev, board);
-+
-+ return 0;
-+}
-+
-+static void __devexit serial_remove_one(struct pci_dev *dev)
-+{
-+ int i;
-+
-+ /*
-+ * Iterate through all of the ports finding those that belong
-+ * to this PCI device.
-+ */
-+ for(i = 0; i < NR_PORTS; i++) {
-+ if (rs_table[i].dev != dev)
-+ continue;
-+ unregister_serial(i);
-+ rs_table[i].dev = 0;
-+ }
-+ /*
-+ * Now execute any board-specific shutdown procedure
-+ */
-+ for (i=0; i < NR_PCI_BOARDS; i++) {
-+ struct pci_board_inst *brd = &serial_pci_board[i];
-+
-+ if (serial_pci_board[i].dev != dev)
-+ continue;
-+ if (brd->board.init_fn)
-+ (brd->board.init_fn)(brd->dev, &brd->board, 0);
-+ if (DEACTIVATE_FUNC(brd->dev))
-+ (DEACTIVATE_FUNC(brd->dev))(brd->dev);
-+ serial_pci_board[i].dev = 0;
-+ }
-+}
-+
-+
-+static struct pci_device_id serial_pci_tbl[] __devinitdata = {
-+ { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960,
-+ PCI_SUBVENDOR_ID_CONNECT_TECH,
-+ PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232, 0, 0,
-+ pbn_b1_8_1382400 },
-+ { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960,
-+ PCI_SUBVENDOR_ID_CONNECT_TECH,
-+ PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_232, 0, 0,
-+ pbn_b1_4_1382400 },
-+ { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960,
-+ PCI_SUBVENDOR_ID_CONNECT_TECH,
-+ PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_232, 0, 0,
-+ pbn_b1_2_1382400 },
-+ { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
-+ PCI_SUBVENDOR_ID_CONNECT_TECH,
-+ PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232, 0, 0,
-+ pbn_b1_8_1382400 },
-+ { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
-+ PCI_SUBVENDOR_ID_CONNECT_TECH,
-+ PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_232, 0, 0,
-+ pbn_b1_4_1382400 },
-+ { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
-+ PCI_SUBVENDOR_ID_CONNECT_TECH,
-+ PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_232, 0, 0,
-+ pbn_b1_2_1382400 },
-+ { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
-+ PCI_SUBVENDOR_ID_CONNECT_TECH,
-+ PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485, 0, 0,
-+ pbn_b1_8_921600 },
-+ { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
-+ PCI_SUBVENDOR_ID_CONNECT_TECH,
-+ PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485_4_4, 0, 0,
-+ pbn_b1_8_921600 },
-+ { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
-+ PCI_SUBVENDOR_ID_CONNECT_TECH,
-+ PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_485, 0, 0,
-+ pbn_b1_4_921600 },
-+ { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
-+ PCI_SUBVENDOR_ID_CONNECT_TECH,
-+ PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_485_2_2, 0, 0,
-+ pbn_b1_4_921600 },
-+ { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
-+ PCI_SUBVENDOR_ID_CONNECT_TECH,
-+ PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_485, 0, 0,
-+ pbn_b1_2_921600 },
-+ { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
-+ PCI_SUBVENDOR_ID_CONNECT_TECH,
-+ PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485_2_6, 0, 0,
-+ pbn_b1_8_921600 },
-+ { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
-+ PCI_SUBVENDOR_ID_CONNECT_TECH,
-+ PCI_SUBDEVICE_ID_CONNECT_TECH_BH081101V1, 0, 0,
-+ pbn_b1_8_921600 },
-+ { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
-+ PCI_SUBVENDOR_ID_CONNECT_TECH,
-+ PCI_SUBDEVICE_ID_CONNECT_TECH_BH041101V1, 0, 0,
-+ pbn_b1_4_921600 },
-+
-+ { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_U530,
-+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-+ pbn_b2_bt_1_115200 },
-+ { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM2,
-+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-+ pbn_b2_bt_2_115200 },
-+ { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM422,
-+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-+ pbn_b2_bt_4_115200 },
-+ { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM232,
-+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-+ pbn_b2_bt_2_115200 },
-+ { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_COMM4,
-+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-+ pbn_b2_bt_4_115200 },
-+ { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_COMM8,
-+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-+ pbn_b2_8_115200 },
-+
-+ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_GTEK_SERIAL2,
-+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-+ pbn_b2_bt_2_115200 },
-+ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_SPCOM200,
-+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-+ pbn_b2_bt_2_921600 },
-+ /* VScom SPCOM800, from sl@s.pl */
-+ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_SPCOM800,
-+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-+ pbn_b2_8_921600 },
-+ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_1077,
-+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-+ pbn_b2_4_921600 },
-+ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
-+ PCI_SUBVENDOR_ID_KEYSPAN,
-+ PCI_SUBDEVICE_ID_KEYSPAN_SX2, 0, 0,
-+ pbn_panacom },
-+ { PCI_VENDOR_ID_PANACOM, PCI_DEVICE_ID_PANACOM_QUADMODEM,
-+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-+ pbn_panacom4 },
-+ { PCI_VENDOR_ID_PANACOM, PCI_DEVICE_ID_PANACOM_DUALMODEM,
-+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-+ pbn_panacom2 },
-+ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
-+ PCI_SUBVENDOR_ID_CHASE_PCIFAST,
-+ PCI_SUBDEVICE_ID_CHASE_PCIFAST4, 0, 0,
-+ pbn_b2_4_460800 },
-+ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
-+ PCI_SUBVENDOR_ID_CHASE_PCIFAST,
-+ PCI_SUBDEVICE_ID_CHASE_PCIFAST8, 0, 0,
-+ pbn_b2_8_460800 },
-+ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
-+ PCI_SUBVENDOR_ID_CHASE_PCIFAST,
-+ PCI_SUBDEVICE_ID_CHASE_PCIFAST16, 0, 0,
-+ pbn_b2_16_460800 },
-+ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
-+ PCI_SUBVENDOR_ID_CHASE_PCIFAST,
-+ PCI_SUBDEVICE_ID_CHASE_PCIFAST16FMC, 0, 0,
-+ pbn_b2_16_460800 },
-+ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
-+ PCI_SUBVENDOR_ID_CHASE_PCIRAS,
-+ PCI_SUBDEVICE_ID_CHASE_PCIRAS4, 0, 0,
-+ pbn_b2_4_460800 },
-+ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
-+ PCI_SUBVENDOR_ID_CHASE_PCIRAS,
-+ PCI_SUBDEVICE_ID_CHASE_PCIRAS8, 0, 0,
-+ pbn_b2_8_460800 },
-+ /* Megawolf Romulus PCI Serial Card, from Mike Hudson */
-+ /* (Exoray@isys.ca) */
-+ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_ROMULUS,
-+ 0x10b5, 0x106a, 0, 0,
-+ pbn_plx_romulus },
-+ { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_QSC100,
-+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-+ pbn_b1_4_115200 },
-+ { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSC100,
-+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-+ pbn_b1_2_115200 },
-+ { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_ESC100D,
-+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-+ pbn_b1_8_115200 },
-+ { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_ESC100M,
-+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-+ pbn_b1_8_115200 },
-+ { PCI_VENDOR_ID_SPECIALIX, PCI_DEVICE_ID_OXSEMI_16PCI954,
-+ PCI_VENDOR_ID_SPECIALIX, PCI_SUBDEVICE_ID_SPECIALIX_SPEED4, 0, 0,
-+ pbn_b0_4_921600 },
-+ { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954,
-+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-+ pbn_b0_4_115200 },
-+ { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI952,
-+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-+ pbn_b0_bt_2_921600 },
-+
-+ /* Digitan DS560-558, from jimd@esoft.com */
-+ { PCI_VENDOR_ID_ATT, PCI_DEVICE_ID_ATT_VENUS_MODEM,
-+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-+ pbn_b1_1_115200 },
-+
-+ /* 3Com US Robotics 56k Voice Internal PCI model 5610 */
-+ { PCI_VENDOR_ID_USR, 0x1008,
-+ PCI_ANY_ID, PCI_ANY_ID, },
-+
-+ /* Titan Electronic cards */
-+ { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100,
-+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-+ pbn_b0_1_921600 },
-+ { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200,
-+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-+ pbn_b0_2_921600 },
-+ { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400,
-+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-+ pbn_b0_4_921600 },
-+ { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800B,
-+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-+ pbn_b0_4_921600 },
-+ { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100L,
-+ PCI_ANY_ID, PCI_ANY_ID,
-+ SPCI_FL_BASE1, 1, 921600 },
-+ { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200L,
-+ PCI_ANY_ID, PCI_ANY_ID,
-+ SPCI_FL_BASE1 | SPCI_FL_BASE_TABLE, 2, 921600 },
-+ /* The 400L and 800L have a custom hack in get_pci_port */
-+ { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400L,
-+ PCI_ANY_ID, PCI_ANY_ID,
-+ SPCI_FL_BASE_TABLE, 4, 921600 },
-+ { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800L,
-+ PCI_ANY_ID, PCI_ANY_ID,
-+ SPCI_FL_BASE_TABLE, 8, 921600 },
-+
-+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_550,
-+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-+ pbn_siig10x_0 },
-+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_650,
-+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-+ pbn_siig10x_0 },
-+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_850,
-+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-+ pbn_siig10x_0 },
-+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_550,
-+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-+ pbn_siig10x_2 },
-+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_650,
-+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-+ pbn_siig10x_2 },
-+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_850,
-+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-+ pbn_siig10x_2 },
-+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_550,
-+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-+ pbn_siig10x_4 },
-+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_650,
-+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-+ pbn_siig10x_4 },
-+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_850,
-+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-+ pbn_siig10x_4 },
-+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_550,
-+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-+ pbn_siig20x_0 },
-+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_650,
-+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-+ pbn_siig20x_0 },
-+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_850,
-+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-+ pbn_siig20x_0 },
-+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_550,
-+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-+ pbn_siig20x_2 },
-+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_650,
-+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-+ pbn_siig20x_2 },
-+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_850,
-+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-+ pbn_siig20x_2 },
-+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_550,
-+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-+ pbn_siig20x_4 },
-+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_650,
-+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-+ pbn_siig20x_4 },
-+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_850,
-+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-+ pbn_siig20x_4 },
-+
-+ /* Computone devices submitted by Doug McNash dmcnash@computone.com */
-+ { PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG,
-+ PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG4,
-+ 0, 0, pbn_computone_4 },
-+ { PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG,
-+ PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG8,
-+ 0, 0, pbn_computone_8 },
-+ { PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG,
-+ PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG6,
-+ 0, 0, pbn_computone_6 },
-+
-+ { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI95N,
-+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_oxsemi },
-+ { PCI_VENDOR_ID_TIMEDIA, PCI_DEVICE_ID_TIMEDIA_1889,
-+ PCI_VENDOR_ID_TIMEDIA, PCI_ANY_ID, 0, 0, pbn_timedia },
-+
-+ { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_DSERIAL,
-+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-+ pbn_b0_bt_2_115200 },
-+ { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATRO_A,
-+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-+ pbn_b0_bt_2_115200 },
-+ { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATRO_B,
-+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-+ pbn_b0_bt_2_115200 },
-+ { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_PORT_PLUS,
-+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-+ pbn_b0_bt_2_460800 },
-+ { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUAD_A,
-+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-+ pbn_b0_bt_2_460800 },
-+ { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUAD_B,
-+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-+ pbn_b0_bt_2_460800 },
-+ { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_SSERIAL,
-+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-+ pbn_b0_bt_1_115200 },
-+ { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_PORT_650,
-+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-+ pbn_b0_bt_1_460800 },
-+
-+ /* RAStel 2 port modem, gerg@moreton.com.au */
-+ { PCI_VENDOR_ID_MORETON, PCI_DEVICE_ID_RASTEL_2PORT,
-+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-+ pbn_b2_bt_2_115200 },
-+
-+ /* EKF addition for i960 Boards form EKF with serial port */
-+ { PCI_VENDOR_ID_INTEL, 0x1960,
-+ 0xE4BF, PCI_ANY_ID, 0, 0,
-+ pbn_intel_i960 },
-+
-+ /* Xircom Cardbus/Ethernet combos */
-+ { PCI_VENDOR_ID_XIRCOM, PCI_DEVICE_ID_XIRCOM_X3201_MDM,
-+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-+ pbn_xircom_combo },
-+
-+ /*
-+ * Untested PCI modems, sent in from various folks...
-+ */
-+
-+ /* Elsa Model 56K PCI Modem, from Andreas Rath <arh@01019freenet.de> */
-+ { PCI_VENDOR_ID_ROCKWELL, 0x1004,
-+ 0x1048, 0x1500, 0, 0,
-+ pbn_b1_1_115200 },
-+
-+ { PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_IOC3,
-+ 0xFF00, 0, 0, 0,
-+ pbn_sgi_ioc3 },
-+
-+ /* HP Diva card */
-+ { PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_SAS,
-+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-+ pbn_hp_diva },
-+ { PCI_VENDOR_ID_HP, 0x1290,
-+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-+ pbn_b2_1_115200 },
-+
-+#ifdef CONFIG_DDB5074
-+ /*
-+ * NEC Vrc-5074 (Nile 4) builtin UART.
-+ * Conditionally compiled in since this is a motherboard device.
-+ */
-+ { PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_NILE4,
-+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-+ pbn_nec_nile4 },
-+#endif
-+
-+ { PCI_VENDOR_ID_DCI, PCI_DEVICE_ID_DCI_PCCOM4,
-+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-+ pbn_dci_pccom4 },
-+ { PCI_VENDOR_ID_DCI, PCI_DEVICE_ID_DCI_PCCOM8,
-+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-+ pbn_dci_pccom8 },
-+
-+ { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
-+ PCI_CLASS_COMMUNICATION_SERIAL << 8, 0xffff00, },
-+ { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
-+ PCI_CLASS_COMMUNICATION_MODEM << 8, 0xffff00, },
-+ { 0, }
-+};
-+
-+MODULE_DEVICE_TABLE(pci, serial_pci_tbl);
-+
-+static struct pci_driver serial_pci_driver = {
-+ name: "serial",
-+ probe: serial_init_one,
-+ remove: __devexit_p(serial_remove_one),
-+ id_table: serial_pci_tbl,
-+};
-+
-+
-+/*
-+ * Query PCI space for known serial boards
-+ * If found, add them to the PCI device space in rs_table[]
-+ *
-+ * Accept a maximum of eight boards
-+ *
-+ */
-+static void __devinit probe_serial_pci(void)
-+{
-+#ifdef SERIAL_DEBUG_PCI
-+ printk(KERN_DEBUG "Entered probe_serial_pci()\n");
-+#endif
-+
-+ /* Register call PCI serial devices. Null out
-+ * the driver name upon failure, as a signal
-+ * not to attempt to unregister the driver later
-+ */
-+ if (pci_module_init (&serial_pci_driver) != 0)
-+ serial_pci_driver.name = "";
-+
-+#ifdef SERIAL_DEBUG_PCI
-+ printk(KERN_DEBUG "Leaving probe_serial_pci() (probe finished)\n");
-+#endif
-+ return;
-+}
-+
-+#endif /* ENABLE_SERIAL_PCI */
-+
-+#ifdef ENABLE_SERIAL_PNP
-+
-+struct pnp_board {
-+ unsigned short vendor;
-+ unsigned short device;
-+};
-+
-+static struct pnp_board pnp_devices[] __devinitdata = {
-+ /* Archtek America Corp. */
-+ /* Archtek SmartLink Modem 3334BT Plug & Play */
-+ { ISAPNP_VENDOR('A', 'A', 'C'), ISAPNP_DEVICE(0x000F) },
-+ /* Anchor Datacomm BV */
-+ /* SXPro 144 External Data Fax Modem Plug & Play */
-+ { ISAPNP_VENDOR('A', 'D', 'C'), ISAPNP_DEVICE(0x0001) },
-+ /* SXPro 288 External Data Fax Modem Plug & Play */
-+ { ISAPNP_VENDOR('A', 'D', 'C'), ISAPNP_DEVICE(0x0002) },
-+ /* Rockwell 56K ACF II Fax+Data+Voice Modem */
-+ { ISAPNP_VENDOR('A', 'K', 'Y'), ISAPNP_DEVICE(0x1021) },
-+ /* AZT3005 PnP SOUND DEVICE */
-+ { ISAPNP_VENDOR('A', 'Z', 'T'), ISAPNP_DEVICE(0x4001) },
-+ /* Best Data Products Inc. Smart One 336F PnP Modem */
-+ { ISAPNP_VENDOR('B', 'D', 'P'), ISAPNP_DEVICE(0x3336) },
-+ /* Boca Research */
-+ /* Boca Complete Ofc Communicator 14.4 Data-FAX */
-+ { ISAPNP_VENDOR('B', 'R', 'I'), ISAPNP_DEVICE(0x0A49) },
-+ /* Boca Research 33,600 ACF Modem */
-+ { ISAPNP_VENDOR('B', 'R', 'I'), ISAPNP_DEVICE(0x1400) },
-+ /* Boca 33.6 Kbps Internal FD34FSVD */
-+ { ISAPNP_VENDOR('B', 'R', 'I'), ISAPNP_DEVICE(0x3400) },
-+ /* Boca 33.6 Kbps Internal FD34FSVD */
-+ { ISAPNP_VENDOR('B', 'R', 'I'), ISAPNP_DEVICE(0x0A49) },
-+ /* Best Data Products Inc. Smart One 336F PnP Modem */
-+ { ISAPNP_VENDOR('B', 'D', 'P'), ISAPNP_DEVICE(0x3336) },
-+ /* Computer Peripherals Inc */
-+ /* EuroViVa CommCenter-33.6 SP PnP */
-+ { ISAPNP_VENDOR('C', 'P', 'I'), ISAPNP_DEVICE(0x4050) },
-+ /* Creative Labs */
-+ /* Creative Labs Phone Blaster 28.8 DSVD PnP Voice */
-+ { ISAPNP_VENDOR('C', 'T', 'L'), ISAPNP_DEVICE(0x3001) },
-+ /* Creative Labs Modem Blaster 28.8 DSVD PnP Voice */
-+ { ISAPNP_VENDOR('C', 'T', 'L'), ISAPNP_DEVICE(0x3011) },
-+ /* Creative */
-+ /* Creative Modem Blaster Flash56 DI5601-1 */
-+ { ISAPNP_VENDOR('D', 'M', 'B'), ISAPNP_DEVICE(0x1032) },
-+ /* Creative Modem Blaster V.90 DI5660 */
-+ { ISAPNP_VENDOR('D', 'M', 'B'), ISAPNP_DEVICE(0x2001) },
-+ /* FUJITSU */
-+ /* Fujitsu 33600 PnP-I2 R Plug & Play */
-+ { ISAPNP_VENDOR('F', 'U', 'J'), ISAPNP_DEVICE(0x0202) },
-+ /* Fujitsu FMV-FX431 Plug & Play */
-+ { ISAPNP_VENDOR('F', 'U', 'J'), ISAPNP_DEVICE(0x0205) },
-+ /* Fujitsu 33600 PnP-I4 R Plug & Play */
-+ { ISAPNP_VENDOR('F', 'U', 'J'), ISAPNP_DEVICE(0x0206) },
-+ /* Fujitsu Fax Voice 33600 PNP-I5 R Plug & Play */
-+ { ISAPNP_VENDOR('F', 'U', 'J'), ISAPNP_DEVICE(0x0209) },
-+ /* Archtek America Corp. */
-+ /* Archtek SmartLink Modem 3334BT Plug & Play */
-+ { ISAPNP_VENDOR('G', 'V', 'C'), ISAPNP_DEVICE(0x000F) },
-+ /* Hayes */
-+ /* Hayes Optima 288 V.34-V.FC + FAX + Voice Plug & Play */
-+ { ISAPNP_VENDOR('H', 'A', 'Y'), ISAPNP_DEVICE(0x0001) },
-+ /* Hayes Optima 336 V.34 + FAX + Voice PnP */
-+ { ISAPNP_VENDOR('H', 'A', 'Y'), ISAPNP_DEVICE(0x000C) },
-+ /* Hayes Optima 336B V.34 + FAX + Voice PnP */
-+ { ISAPNP_VENDOR('H', 'A', 'Y'), ISAPNP_DEVICE(0x000D) },
-+ /* Hayes Accura 56K Ext Fax Modem PnP */
-+ { ISAPNP_VENDOR('H', 'A', 'Y'), ISAPNP_DEVICE(0x5670) },
-+ /* Hayes Accura 56K Ext Fax Modem PnP */
-+ { ISAPNP_VENDOR('H', 'A', 'Y'), ISAPNP_DEVICE(0x5674) },
-+ /* Hayes Accura 56K Fax Modem PnP */
-+ { ISAPNP_VENDOR('H', 'A', 'Y'), ISAPNP_DEVICE(0x5675) },
-+ /* Hayes 288, V.34 + FAX */
-+ { ISAPNP_VENDOR('H', 'A', 'Y'), ISAPNP_DEVICE(0xF000) },
-+ /* Hayes Optima 288 V.34 + FAX + Voice, Plug & Play */
-+ { ISAPNP_VENDOR('H', 'A', 'Y'), ISAPNP_DEVICE(0xF001) },
-+ /* IBM */
-+ /* IBM Thinkpad 701 Internal Modem Voice */
-+ { ISAPNP_VENDOR('I', 'B', 'M'), ISAPNP_DEVICE(0x0033) },
-+ /* Intertex */
-+ /* Intertex 28k8 33k6 Voice EXT PnP */
-+ { ISAPNP_VENDOR('I', 'X', 'D'), ISAPNP_DEVICE(0xC801) },
-+ /* Intertex 33k6 56k Voice EXT PnP */
-+ { ISAPNP_VENDOR('I', 'X', 'D'), ISAPNP_DEVICE(0xC901) },
-+ /* Intertex 28k8 33k6 Voice SP EXT PnP */
-+ { ISAPNP_VENDOR('I', 'X', 'D'), ISAPNP_DEVICE(0xD801) },
-+ /* Intertex 33k6 56k Voice SP EXT PnP */
-+ { ISAPNP_VENDOR('I', 'X', 'D'), ISAPNP_DEVICE(0xD901) },
-+ /* Intertex 28k8 33k6 Voice SP INT PnP */
-+ { ISAPNP_VENDOR('I', 'X', 'D'), ISAPNP_DEVICE(0xF401) },
-+ /* Intertex 28k8 33k6 Voice SP EXT PnP */
-+ { ISAPNP_VENDOR('I', 'X', 'D'), ISAPNP_DEVICE(0xF801) },
-+ /* Intertex 33k6 56k Voice SP EXT PnP */
-+ { ISAPNP_VENDOR('I', 'X', 'D'), ISAPNP_DEVICE(0xF901) },
-+ /* Kortex International */
-+ /* KORTEX 28800 Externe PnP */
-+ { ISAPNP_VENDOR('K', 'O', 'R'), ISAPNP_DEVICE(0x4522) },
-+ /* KXPro 33.6 Vocal ASVD PnP */
-+ { ISAPNP_VENDOR('K', 'O', 'R'), ISAPNP_DEVICE(0xF661) },
-+ /* Lasat */
-+ /* LASAT Internet 33600 PnP */
-+ { ISAPNP_VENDOR('L', 'A', 'S'), ISAPNP_DEVICE(0x4040) },
-+ /* Lasat Safire 560 PnP */
-+ { ISAPNP_VENDOR('L', 'A', 'S'), ISAPNP_DEVICE(0x4540) },
-+ /* Lasat Safire 336 PnP */
-+ { ISAPNP_VENDOR('L', 'A', 'S'), ISAPNP_DEVICE(0x5440) },
-+ /* Microcom, Inc. */
-+ /* Microcom TravelPorte FAST V.34 Plug & Play */
-+ { ISAPNP_VENDOR('M', 'N', 'P'), ISAPNP_DEVICE(0x281) },
-+ /* Microcom DeskPorte V.34 FAST or FAST+ Plug & Play */
-+ { ISAPNP_VENDOR('M', 'N', 'P'), ISAPNP_DEVICE(0x0336) },
-+ /* Microcom DeskPorte FAST EP 28.8 Plug & Play */
-+ { ISAPNP_VENDOR('M', 'N', 'P'), ISAPNP_DEVICE(0x0339) },
-+ /* Microcom DeskPorte 28.8P Plug & Play */
-+ { ISAPNP_VENDOR('M', 'N', 'P'), ISAPNP_DEVICE(0x0342) },
-+ /* Microcom DeskPorte FAST ES 28.8 Plug & Play */
-+ { ISAPNP_VENDOR('M', 'N', 'P'), ISAPNP_DEVICE(0x0500) },
-+ /* Microcom DeskPorte FAST ES 28.8 Plug & Play */
-+ { ISAPNP_VENDOR('M', 'N', 'P'), ISAPNP_DEVICE(0x0501) },
-+ /* Microcom DeskPorte 28.8S Internal Plug & Play */
-+ { ISAPNP_VENDOR('M', 'N', 'P'), ISAPNP_DEVICE(0x0502) },
-+ /* Motorola */
-+ /* Motorola BitSURFR Plug & Play */
-+ { ISAPNP_VENDOR('M', 'O', 'T'), ISAPNP_DEVICE(0x1105) },
-+ /* Motorola TA210 Plug & Play */
-+ { ISAPNP_VENDOR('M', 'O', 'T'), ISAPNP_DEVICE(0x1111) },
-+ /* Motorola HMTA 200 (ISDN) Plug & Play */
-+ { ISAPNP_VENDOR('M', 'O', 'T'), ISAPNP_DEVICE(0x1114) },
-+ /* Motorola BitSURFR Plug & Play */
-+ { ISAPNP_VENDOR('M', 'O', 'T'), ISAPNP_DEVICE(0x1115) },
-+ /* Motorola Lifestyle 28.8 Internal */
-+ { ISAPNP_VENDOR('M', 'O', 'T'), ISAPNP_DEVICE(0x1190) },
-+ /* Motorola V.3400 Plug & Play */
-+ { ISAPNP_VENDOR('M', 'O', 'T'), ISAPNP_DEVICE(0x1501) },
-+ /* Motorola Lifestyle 28.8 V.34 Plug & Play */
-+ { ISAPNP_VENDOR('M', 'O', 'T'), ISAPNP_DEVICE(0x1502) },
-+ /* Motorola Power 28.8 V.34 Plug & Play */
-+ { ISAPNP_VENDOR('M', 'O', 'T'), ISAPNP_DEVICE(0x1505) },
-+ /* Motorola ModemSURFR External 28.8 Plug & Play */
-+ { ISAPNP_VENDOR('M', 'O', 'T'), ISAPNP_DEVICE(0x1509) },
-+ /* Motorola Premier 33.6 Desktop Plug & Play */
-+ { ISAPNP_VENDOR('M', 'O', 'T'), ISAPNP_DEVICE(0x150A) },
-+ /* Motorola VoiceSURFR 56K External PnP */
-+ { ISAPNP_VENDOR('M', 'O', 'T'), ISAPNP_DEVICE(0x150F) },
-+ /* Motorola ModemSURFR 56K External PnP */
-+ { ISAPNP_VENDOR('M', 'O', 'T'), ISAPNP_DEVICE(0x1510) },
-+ /* Motorola ModemSURFR 56K Internal PnP */
-+ { ISAPNP_VENDOR('M', 'O', 'T'), ISAPNP_DEVICE(0x1550) },
-+ /* Motorola ModemSURFR Internal 28.8 Plug & Play */
-+ { ISAPNP_VENDOR('M', 'O', 'T'), ISAPNP_DEVICE(0x1560) },
-+ /* Motorola Premier 33.6 Internal Plug & Play */
-+ { ISAPNP_VENDOR('M', 'O', 'T'), ISAPNP_DEVICE(0x1580) },
-+ /* Motorola OnlineSURFR 28.8 Internal Plug & Play */
-+ { ISAPNP_VENDOR('M', 'O', 'T'), ISAPNP_DEVICE(0x15B0) },
-+ /* Motorola VoiceSURFR 56K Internal PnP */
-+ { ISAPNP_VENDOR('M', 'O', 'T'), ISAPNP_DEVICE(0x15F0) },
-+ /* Com 1 */
-+ /* Deskline K56 Phone System PnP */
-+ { ISAPNP_VENDOR('M', 'V', 'X'), ISAPNP_DEVICE(0x00A1) },
-+ /* PC Rider K56 Phone System PnP */
-+ { ISAPNP_VENDOR('M', 'V', 'X'), ISAPNP_DEVICE(0x00F2) },
-+ /* Pace 56 Voice Internal Plug & Play Modem */
-+ { ISAPNP_VENDOR('P', 'M', 'C'), ISAPNP_DEVICE(0x2430) },
-+ /* Generic */
-+ /* Generic standard PC COM port */
-+ { ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_DEVICE(0x0500) },
-+ /* Generic 16550A-compatible COM port */
-+ { ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_DEVICE(0x0501) },
-+ /* Compaq 14400 Modem */
-+ { ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_DEVICE(0xC000) },
-+ /* Compaq 2400/9600 Modem */
-+ { ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_DEVICE(0xC001) },
-+ /* Dial-Up Networking Serial Cable between 2 PCs */
-+ { ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_DEVICE(0xC031) },
-+ /* Dial-Up Networking Parallel Cable between 2 PCs */
-+ { ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_DEVICE(0xC032) },
-+ /* Standard 9600 bps Modem */
-+ { ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_DEVICE(0xC100) },
-+ /* Standard 14400 bps Modem */
-+ { ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_DEVICE(0xC101) },
-+ /* Standard 28800 bps Modem*/
-+ { ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_DEVICE(0xC102) },
-+ /* Standard Modem*/
-+ { ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_DEVICE(0xC103) },
-+ /* Standard 9600 bps Modem*/
-+ { ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_DEVICE(0xC104) },
-+ /* Standard 14400 bps Modem*/
-+ { ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_DEVICE(0xC105) },
-+ /* Standard 28800 bps Modem*/
-+ { ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_DEVICE(0xC106) },
-+ /* Standard Modem */
-+ { ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_DEVICE(0xC107) },
-+ /* Standard 9600 bps Modem */
-+ { ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_DEVICE(0xC108) },
-+ /* Standard 14400 bps Modem */
-+ { ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_DEVICE(0xC109) },
-+ /* Standard 28800 bps Modem */
-+ { ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_DEVICE(0xC10A) },
-+ /* Standard Modem */
-+ { ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_DEVICE(0xC10B) },
-+ /* Standard 9600 bps Modem */
-+ { ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_DEVICE(0xC10C) },
-+ /* Standard 14400 bps Modem */
-+ { ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_DEVICE(0xC10D) },
-+ /* Standard 28800 bps Modem */
-+ { ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_DEVICE(0xC10E) },
-+ /* Standard Modem */
-+ { ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_DEVICE(0xC10F) },
-+ /* Standard PCMCIA Card Modem */
-+ { ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_DEVICE(0x2000) },
-+ /* Rockwell */
-+ /* Modular Technology */
-+ /* Rockwell 33.6 DPF Internal PnP */
-+ /* Modular Technology 33.6 Internal PnP */
-+ { ISAPNP_VENDOR('R', 'O', 'K'), ISAPNP_DEVICE(0x0030) },
-+ /* Kortex International */
-+ /* KORTEX 14400 Externe PnP */
-+ { ISAPNP_VENDOR('R', 'O', 'K'), ISAPNP_DEVICE(0x0100) },
-+ /* Viking Components, Inc */
-+ /* Viking 28.8 INTERNAL Fax+Data+Voice PnP */
-+ { ISAPNP_VENDOR('R', 'O', 'K'), ISAPNP_DEVICE(0x4920) },
-+ /* Rockwell */
-+ /* British Telecom */
-+ /* Modular Technology */
-+ /* Rockwell 33.6 DPF External PnP */
-+ /* BT Prologue 33.6 External PnP */
-+ /* Modular Technology 33.6 External PnP */
-+ { ISAPNP_VENDOR('R', 'S', 'S'), ISAPNP_DEVICE(0x00A0) },
-+ /* Viking 56K FAX INT */
-+ { ISAPNP_VENDOR('R', 'S', 'S'), ISAPNP_DEVICE(0x0262) },
-+ /* SupraExpress 28.8 Data/Fax PnP modem */
-+ { ISAPNP_VENDOR('S', 'U', 'P'), ISAPNP_DEVICE(0x1310) },
-+ /* SupraExpress 33.6 Data/Fax PnP modem */
-+ { ISAPNP_VENDOR('S', 'U', 'P'), ISAPNP_DEVICE(0x1421) },
-+ /* SupraExpress 33.6 Data/Fax PnP modem */
-+ { ISAPNP_VENDOR('S', 'U', 'P'), ISAPNP_DEVICE(0x1590) },
-+ /* SupraExpress 33.6 Data/Fax PnP modem */
-+ { ISAPNP_VENDOR('S', 'U', 'P'), ISAPNP_DEVICE(0x1760) },
-+ /* Phoebe Micro */
-+ /* Phoebe Micro 33.6 Data Fax 1433VQH Plug & Play */
-+ { ISAPNP_VENDOR('T', 'E', 'X'), ISAPNP_DEVICE(0x0011) },
-+ /* Archtek America Corp. */
-+ /* Archtek SmartLink Modem 3334BT Plug & Play */
-+ { ISAPNP_VENDOR('U', 'A', 'C'), ISAPNP_DEVICE(0x000F) },
-+ /* 3Com Corp. */
-+ /* Gateway Telepath IIvi 33.6 */
-+ { ISAPNP_VENDOR('U', 'S', 'R'), ISAPNP_DEVICE(0x0000) },
-+ /* Sportster Vi 14.4 PnP FAX Voicemail */
-+ { ISAPNP_VENDOR('U', 'S', 'R'), ISAPNP_DEVICE(0x0004) },
-+ /* U.S. Robotics 33.6K Voice INT PnP */
-+ { ISAPNP_VENDOR('U', 'S', 'R'), ISAPNP_DEVICE(0x0006) },
-+ /* U.S. Robotics 33.6K Voice EXT PnP */
-+ { ISAPNP_VENDOR('U', 'S', 'R'), ISAPNP_DEVICE(0x0007) },
-+ /* U.S. Robotics 33.6K Voice INT PnP */
-+ { ISAPNP_VENDOR('U', 'S', 'R'), ISAPNP_DEVICE(0x2002) },
-+ /* U.S. Robotics 56K Voice INT PnP */
-+ { ISAPNP_VENDOR('U', 'S', 'R'), ISAPNP_DEVICE(0x2070) },
-+ /* U.S. Robotics 56K Voice EXT PnP */
-+ { ISAPNP_VENDOR('U', 'S', 'R'), ISAPNP_DEVICE(0x2080) },
-+ /* U.S. Robotics 56K FAX INT */
-+ { ISAPNP_VENDOR('U', 'S', 'R'), ISAPNP_DEVICE(0x3031) },
-+ /* U.S. Robotics 56K Voice INT PnP */
-+ { ISAPNP_VENDOR('U', 'S', 'R'), ISAPNP_DEVICE(0x3070) },
-+ /* U.S. Robotics 56K Voice EXT PnP */
-+ { ISAPNP_VENDOR('U', 'S', 'R'), ISAPNP_DEVICE(0x3080) },
-+ /* U.S. Robotics 56K Voice INT PnP */
-+ { ISAPNP_VENDOR('U', 'S', 'R'), ISAPNP_DEVICE(0x3090) },
-+ /* U.S. Robotics 56K Message */
-+ { ISAPNP_VENDOR('U', 'S', 'R'), ISAPNP_DEVICE(0x9100) },
-+ /* U.S. Robotics 56K FAX EXT PnP*/
-+ { ISAPNP_VENDOR('U', 'S', 'R'), ISAPNP_DEVICE(0x9160) },
-+ /* U.S. Robotics 56K FAX INT PnP*/
-+ { ISAPNP_VENDOR('U', 'S', 'R'), ISAPNP_DEVICE(0x9170) },
-+ /* U.S. Robotics 56K Voice EXT PnP*/
-+ { ISAPNP_VENDOR('U', 'S', 'R'), ISAPNP_DEVICE(0x9180) },
-+ /* U.S. Robotics 56K Voice INT PnP*/
-+ { ISAPNP_VENDOR('U', 'S', 'R'), ISAPNP_DEVICE(0x9190) },
-+ { 0, }
-+};
-+
-+static inline void avoid_irq_share(struct pci_dev *dev)
-+{
-+ int i, map = 0x1FF8;
-+ struct serial_state *state = rs_table;
-+ struct isapnp_irq *irq;
-+ struct isapnp_resources *res = dev->sysdata;
-+
-+ for (i = 0; i < NR_PORTS; i++) {
-+ if (state->type != PORT_UNKNOWN)
-+ clear_bit(state->irq, &map);
-+ state++;
-+ }
-+
-+ for ( ; res; res = res->alt)
-+ for(irq = res->irq; irq; irq = irq->next)
-+ irq->map = map;
-+}
-+
-+static char *modem_names[] __devinitdata = {
-+ "MODEM", "Modem", "modem", "FAX", "Fax", "fax",
-+ "56K", "56k", "K56", "33.6", "28.8", "14.4",
-+ "33,600", "28,800", "14,400", "33.600", "28.800", "14.400",
-+ "33600", "28800", "14400", "V.90", "V.34", "V.32", 0
-+};
-+
-+static int __devinit check_name(char *name)
-+{
-+ char **tmp = modem_names;
-+
-+ while (*tmp) {
-+ if (strstr(name, *tmp))
-+ return 1;
-+ tmp++;
-+ }
-+ return 0;
-+}
-+
-+static inline int check_compatible_id(struct pci_dev *dev)
-+{
-+ int i;
-+ for (i = 0; i < DEVICE_COUNT_COMPATIBLE; i++)
-+ if ((dev->vendor_compatible[i] ==
-+ ISAPNP_VENDOR('P', 'N', 'P')) &&
-+ (swab16(dev->device_compatible[i]) >= 0xc000) &&
-+ (swab16(dev->device_compatible[i]) <= 0xdfff))
-+ return 0;
-+ return 1;
-+}
-+
-+/*
-+ * Given a complete unknown ISA PnP device, try to use some heuristics to
-+ * detect modems. Currently use such heuristic set:
-+ * - dev->name or dev->bus->name must contain "modem" substring;
-+ * - device must have only one IO region (8 byte long) with base adress
-+ * 0x2e8, 0x3e8, 0x2f8 or 0x3f8.
-+ *
-+ * Such detection looks very ugly, but can detect at least some of numerous
-+ * ISA PnP modems, alternatively we must hardcode all modems in pnp_devices[]
-+ * table.
-+ */
-+static int _INLINE_ serial_pnp_guess_board(struct pci_dev *dev,
-+ struct pci_board *board)
-+{
-+ struct isapnp_resources *res = (struct isapnp_resources *)dev->sysdata;
-+ struct isapnp_resources *resa;
-+
-+ if (!(check_name(dev->name) || check_name(dev->bus->name)) &&
-+ !(check_compatible_id(dev)))
-+ return 1;
-+
-+ if (!res || res->next)
-+ return 1;
-+
-+ for (resa = res->alt; resa; resa = resa->alt) {
-+ struct isapnp_port *port;
-+ for (port = res->port; port; port = port->next)
-+ if ((port->size == 8) &&
-+ ((port->min == 0x2f8) ||
-+ (port->min == 0x3f8) ||
-+ (port->min == 0x2e8) ||
-+ (port->min == 0x3e8)))
-+ return 0;
-+ }
-+
-+ return 1;
-+}
-+
-+static void __devinit probe_serial_pnp(void)
-+{
-+ struct pci_dev *dev = NULL;
-+ struct pnp_board *pnp_board;
-+ struct pci_board board;
-+
-+#ifdef SERIAL_DEBUG_PNP
-+ printk("Entered probe_serial_pnp()\n");
-+#endif
-+ if (!isapnp_present()) {
-+#ifdef SERIAL_DEBUG_PNP
-+ printk("Leaving probe_serial_pnp() (no isapnp)\n");
-+#endif
-+ return;
-+ }
-+
-+ isapnp_for_each_dev(dev) {
-+ if (dev->active)
-+ continue;
-+
-+ memset(&board, 0, sizeof(board));
-+ board.flags = SPCI_FL_BASE0 | SPCI_FL_PNPDEFAULT;
-+ board.num_ports = 1;
-+ board.base_baud = 115200;
-+
-+ for (pnp_board = pnp_devices; pnp_board->vendor; pnp_board++)
-+ if ((dev->vendor == pnp_board->vendor) &&
-+ (dev->device == pnp_board->device))
-+ break;
-+
-+ if (pnp_board->vendor) {
-+ /* Special case that's more efficient to hardcode */
-+ if ((pnp_board->vendor == ISAPNP_VENDOR('A', 'K', 'Y') &&
-+ pnp_board->device == ISAPNP_DEVICE(0x1021)))
-+ board.flags |= SPCI_FL_NO_SHIRQ;
-+ } else {
-+ if (serial_pnp_guess_board(dev, &board))
-+ continue;
-+ }
-+
-+ if (board.flags & SPCI_FL_NO_SHIRQ)
-+ avoid_irq_share(dev);
-+ start_pci_pnp_board(dev, &board);
-+ }
-+
-+#ifdef SERIAL_DEBUG_PNP
-+ printk("Leaving probe_serial_pnp() (probe finished)\n");
-+#endif
-+ return;
-+}
-+
-+#endif /* ENABLE_SERIAL_PNP */
-+
-+/*
-+ * The serial driver boot-time initialization code!
-+ */
-+static int __init rs_init(void)
-+{
-+ int i;
-+ struct serial_state * state;
-+
-+ init_bh(SERIAL_BH, do_serial_bh);
-+ init_timer(&serial_timer);
-+ serial_timer.function = rs_timer;
-+ mod_timer(&serial_timer, jiffies + RS_STROBE_TIME);
-+
-+ for (i = 0; i < NR_IRQS; i++) {
-+ IRQ_ports[i] = 0;
-+ IRQ_timeout[i] = 0;
-+#ifdef CONFIG_SERIAL_MULTIPORT
-+ memset(&rs_multiport[i], 0,
-+ sizeof(struct rs_multiport_struct));
-+#endif
-+ }
-+ show_serial_version();
-+
-+ /* Initialize the tty_driver structure */
-+
-+ memset(&serial_driver, 0, sizeof(struct tty_driver));
-+ serial_driver.magic = TTY_DRIVER_MAGIC;
-+#if (LINUX_VERSION_CODE > 0x20100)
-+ serial_driver.driver_name = "serial";
-+#endif
-+#if (LINUX_VERSION_CODE > 0x2032D && defined(CONFIG_DEVFS_FS))
-+ serial_driver.name = "tts/%d";
-+#else
-+ serial_driver.name = "ttyS";
-+#endif
-+ serial_driver.major = TTY_MAJOR;
-+ serial_driver.minor_start = 64 + SERIAL_DEV_OFFSET;
-+ serial_driver.name_base = SERIAL_DEV_OFFSET;
-+ serial_driver.num = NR_PORTS;
-+ serial_driver.type = TTY_DRIVER_TYPE_SERIAL;
-+ serial_driver.subtype = SERIAL_TYPE_NORMAL;
-+ serial_driver.init_termios = tty_std_termios;
-+ serial_driver.init_termios.c_cflag =
-+ B9600 | CS8 | CREAD | HUPCL | CLOCAL;
-+ serial_driver.flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_NO_DEVFS;
-+ serial_driver.refcount = &serial_refcount;
-+ serial_driver.table = serial_table;
-+ serial_driver.termios = serial_termios;
-+ serial_driver.termios_locked = serial_termios_locked;
-+
-+ serial_driver.open = rs_open;
-+ serial_driver.close = rs_close;
-+ serial_driver.write = rs_write;
-+ serial_driver.put_char = rs_put_char;
-+ serial_driver.flush_chars = rs_flush_chars;
-+ serial_driver.write_room = rs_write_room;
-+ serial_driver.chars_in_buffer = rs_chars_in_buffer;
-+ serial_driver.flush_buffer = rs_flush_buffer;
-+ serial_driver.ioctl = rs_ioctl;
-+ serial_driver.throttle = rs_throttle;
-+ serial_driver.unthrottle = rs_unthrottle;
-+ serial_driver.set_termios = rs_set_termios;
-+ serial_driver.stop = rs_stop;
-+ serial_driver.start = rs_start;
-+ serial_driver.hangup = rs_hangup;
-+#if (LINUX_VERSION_CODE >= 131394) /* Linux 2.1.66 */
-+ serial_driver.break_ctl = rs_break;
-+#endif
-+#if (LINUX_VERSION_CODE >= 131343)
-+ serial_driver.send_xchar = rs_send_xchar;
-+ serial_driver.wait_until_sent = rs_wait_until_sent;
-+ serial_driver.read_proc = rs_read_proc;
-+#endif
-+
-+ /*
-+ * The callout device is just like normal device except for
-+ * major number and the subtype code.
-+ */
-+ callout_driver = serial_driver;
-+#if (LINUX_VERSION_CODE > 0x2032D && defined(CONFIG_DEVFS_FS))
-+ callout_driver.name = "cua/%d";
-+#else
-+ callout_driver.name = "cua";
-+#endif
-+ callout_driver.major = TTYAUX_MAJOR;
-+ callout_driver.subtype = SERIAL_TYPE_CALLOUT;
-+#if (LINUX_VERSION_CODE >= 131343)
-+ callout_driver.read_proc = 0;
-+ callout_driver.proc_entry = 0;
-+#endif
-+
-+ if (tty_register_driver(&serial_driver))
-+ panic("Couldn't register serial driver\n");
-+ if (tty_register_driver(&callout_driver))
-+ panic("Couldn't register callout driver\n");
-+
-+ for (i = 0, state = rs_table; i < NR_PORTS; i++,state++) {
-+ state->magic = SSTATE_MAGIC;
-+ state->line = i;
-+ state->type = PORT_UNKNOWN;
-+ state->custom_divisor = 0;
-+ state->close_delay = 5*HZ/10;
-+ state->closing_wait = 30*HZ;
-+ state->callout_termios = callout_driver.init_termios;
-+ state->normal_termios = serial_driver.init_termios;
-+ state->icount.cts = state->icount.dsr =
-+ state->icount.rng = state->icount.dcd = 0;
-+ state->icount.rx = state->icount.tx = 0;
-+ state->icount.frame = state->icount.parity = 0;
-+ state->icount.overrun = state->icount.brk = 0;
-+ state->irq = irq_cannonicalize(state->irq);
-+ if (state->hub6)
-+ state->io_type = SERIAL_IO_HUB6;
-+ if (state->port && check_region(state->port,8))
-+ continue;
-+#ifdef CONFIG_MCA
-+ if ((state->flags & ASYNC_BOOT_ONLYMCA) && !MCA_bus)
-+ continue;
-+#endif
-+ if (state->flags & ASYNC_BOOT_AUTOCONF)
-+ autoconfig(state);
-+ }
-+ for (i = 0, state = rs_table; i < NR_PORTS; i++,state++) {
-+ if (state->type == PORT_UNKNOWN)
-+ continue;
-+ if ( (state->flags & ASYNC_BOOT_AUTOCONF)
-+ && (state->flags & ASYNC_AUTO_IRQ)
-+ && (state->port != 0 || state->iomem_base != 0))
-+ state->irq = detect_uart_irq(state);
-+ if (state->io_type == SERIAL_IO_MEM) {
-+ printk(KERN_INFO"ttyS%02d%s at 0x%p (irq = %d) is a %s\n",
-+ state->line + SERIAL_DEV_OFFSET,
-+ (state->flags & ASYNC_FOURPORT) ? " FourPort" : "",
-+ state->iomem_base, state->irq,
-+ uart_config[state->type].name);
-+ }
-+ else {
-+ printk(KERN_INFO "ttyS%02d%s at 0x%04lx (irq = %d) is a %s\n",
-+ state->line + SERIAL_DEV_OFFSET,
-+ (state->flags & ASYNC_FOURPORT) ? " FourPort" : "",
-+ state->port, state->irq,
-+ uart_config[state->type].name);
-+ }
-+ tty_register_devfs(&serial_driver, 0,
-+ serial_driver.minor_start + state->line);
-+ tty_register_devfs(&callout_driver, 0,
-+ callout_driver.minor_start + state->line);
-+ }
-+#ifdef ENABLE_SERIAL_PCI
-+ probe_serial_pci();
-+#endif
-+#ifdef ENABLE_SERIAL_PNP
-+ probe_serial_pnp();
-+#endif
-+ return 0;
-+}
-+
-+/*
-+ * This is for use by architectures that know their serial console
-+ * attributes only at run time. Not to be invoked after rs_init().
-+ */
-+int __init early_serial_setup(struct serial_struct *req)
-+{
-+ int i = req->line;
-+
-+ if (i >= NR_IRQS)
-+ return(-ENOENT);
-+ rs_table[i].magic = 0;
-+ rs_table[i].baud_base = req->baud_base;
-+ rs_table[i].port = req->port;
-+ if (HIGH_BITS_OFFSET)
-+ rs_table[i].port += (unsigned long) req->port_high <<
-+ HIGH_BITS_OFFSET;
-+ rs_table[i].irq = req->irq;
-+ rs_table[i].flags = req->flags;
-+ rs_table[i].close_delay = req->close_delay;
-+ rs_table[i].io_type = req->io_type;
-+ rs_table[i].hub6 = req->hub6;
-+ rs_table[i].iomem_base = req->iomem_base;
-+ rs_table[i].iomem_reg_shift = req->iomem_reg_shift;
-+ rs_table[i].type = req->type;
-+ rs_table[i].xmit_fifo_size = req->xmit_fifo_size;
-+ rs_table[i].custom_divisor = req->custom_divisor;
-+ rs_table[i].closing_wait = req->closing_wait;
-+ return(0);
-+}
-+
-+/*
-+ * register_serial and unregister_serial allows for 16x50 serial ports to be
-+ * configured at run-time, to support PCMCIA modems.
-+ */
-+
-+/**
-+ * register_serial - configure a 16x50 serial port at runtime
-+ * @req: request structure
-+ *
-+ * Configure the serial port specified by the request. If the
-+ * port exists and is in use an error is returned. If the port
-+ * is not currently in the table it is added.
-+ *
-+ * The port is then probed and if neccessary the IRQ is autodetected
-+ * If this fails an error is returned.
-+ *
-+ * On success the port is ready to use and the line number is returned.
-+ */
-+
-+int register_serial(struct serial_struct *req)
-+{
-+ int i;
-+ unsigned long flags;
-+ struct serial_state *state;
-+ struct async_struct *info;
-+ unsigned long port;
-+
-+ port = req->port;
-+ if (HIGH_BITS_OFFSET)
-+ port += (unsigned long) req->port_high << HIGH_BITS_OFFSET;
-+
-+ save_flags(flags); cli();
-+ for (i = 0; i < NR_PORTS; i++) {
-+ if ((rs_table[i].port == port) &&
-+ (rs_table[i].iomem_base == req->iomem_base))
-+ break;
-+ }
-+#ifdef __i386__
-+ if (i == NR_PORTS) {
-+ for (i = 4; i < NR_PORTS; i++)
-+ if ((rs_table[i].type == PORT_UNKNOWN) &&
-+ (rs_table[i].count == 0))
-+ break;
-+ }
-+#endif
-+ if (i == NR_PORTS) {
-+ for (i = 0; i < NR_PORTS; i++)
-+ if ((rs_table[i].type == PORT_UNKNOWN) &&
-+ (rs_table[i].count == 0))
-+ break;
-+ }
-+ if (i == NR_PORTS) {
-+ restore_flags(flags);
-+ return -1;
-+ }
-+ state = &rs_table[i];
-+ if (rs_table[i].count) {
-+ restore_flags(flags);
-+ printk("Couldn't configure serial #%d (port=%ld,irq=%d): "
-+ "device already open\n", i, port, req->irq);
-+ return -1;
-+ }
-+ state->irq = req->irq;
-+ state->port = port;
-+ state->flags = req->flags;
-+ state->io_type = req->io_type;
-+ state->iomem_base = req->iomem_base;
-+ state->iomem_reg_shift = req->iomem_reg_shift;
-+ if (req->baud_base)
-+ state->baud_base = req->baud_base;
-+ if ((info = state->info) != NULL) {
-+ info->port = port;
-+ info->flags = req->flags;
-+ info->io_type = req->io_type;
-+ info->iomem_base = req->iomem_base;
-+ info->iomem_reg_shift = req->iomem_reg_shift;
-+ }
-+ autoconfig(state);
-+ if (state->type == PORT_UNKNOWN) {
-+ restore_flags(flags);
-+ printk("register_serial(): autoconfig failed\n");
-+ return -1;
-+ }
-+ restore_flags(flags);
-+
-+ if ((state->flags & ASYNC_AUTO_IRQ) && CONFIGURED_SERIAL_PORT(state))
-+ state->irq = detect_uart_irq(state);
-+
-+ printk(KERN_INFO "ttyS%02d at %s 0x%04lx (irq = %d) is a %s\n",
-+ state->line + SERIAL_DEV_OFFSET,
-+ state->iomem_base ? "iomem" : "port",
-+ state->iomem_base ? (unsigned long)state->iomem_base :
-+ state->port, state->irq, uart_config[state->type].name);
-+ tty_register_devfs(&serial_driver, 0,
-+ serial_driver.minor_start + state->line);
-+ tty_register_devfs(&callout_driver, 0,
-+ callout_driver.minor_start + state->line);
-+ return state->line + SERIAL_DEV_OFFSET;
-+}
-+
-+/**
-+ * unregister_serial - deconfigure a 16x50 serial port
-+ * @line: line to deconfigure
-+ *
-+ * The port specified is deconfigured and its resources are freed. Any
-+ * user of the port is disconnected as if carrier was dropped. Line is
-+ * the port number returned by register_serial().
-+ */
-+
-+void unregister_serial(int line)
-+{
-+ unsigned long flags;
-+ struct serial_state *state = &rs_table[line];
-+
-+ save_flags(flags); cli();
-+ if (state->info && state->info->tty)
-+ tty_hangup(state->info->tty);
-+ state->type = PORT_UNKNOWN;
-+ printk(KERN_INFO "ttyS%02d unloaded\n", state->line);
-+ /* These will be hidden, because they are devices that will no longer
-+ * be available to the system. (ie, PCMCIA modems, once ejected)
-+ */
-+ tty_unregister_devfs(&serial_driver,
-+ serial_driver.minor_start + state->line);
-+ tty_unregister_devfs(&callout_driver,
-+ callout_driver.minor_start + state->line);
-+ restore_flags(flags);
-+}
-+
-+static void __exit rs_fini(void)
-+{
-+ unsigned long flags;
-+ int e1, e2;
-+ int i;
-+ struct async_struct *info;
-+
-+ /* printk("Unloading %s: version %s\n", serial_name, serial_version); */
-+ del_timer_sync(&serial_timer);
-+ save_flags(flags); cli();
-+ remove_bh(SERIAL_BH);
-+ if ((e1 = tty_unregister_driver(&serial_driver)))
-+ printk("serial: failed to unregister serial driver (%d)\n",
-+ e1);
-+ if ((e2 = tty_unregister_driver(&callout_driver)))
-+ printk("serial: failed to unregister callout driver (%d)\n",
-+ e2);
-+ restore_flags(flags);
-+
-+ for (i = 0; i < NR_PORTS; i++) {
-+ if ((info = rs_table[i].info)) {
-+ rs_table[i].info = NULL;
-+ kfree(info);
-+ }
-+ if ((rs_table[i].type != PORT_UNKNOWN) && rs_table[i].port) {
-+#ifdef CONFIG_SERIAL_RSA
-+ if (rs_table[i].type == PORT_RSA)
-+ release_region(rs_table[i].port +
-+ UART_RSA_BASE, 16);
-+ else
-+#endif
-+ release_region(rs_table[i].port, 8);
-+ }
-+#if defined(ENABLE_SERIAL_PCI) || defined(ENABLE_SERIAL_PNP)
-+ if (rs_table[i].iomem_base)
-+ iounmap(rs_table[i].iomem_base);
-+#endif
-+ }
-+#if defined(ENABLE_SERIAL_PCI) || defined(ENABLE_SERIAL_PNP)
-+ for (i=0; i < NR_PCI_BOARDS; i++) {
-+ struct pci_board_inst *brd = &serial_pci_board[i];
-+
-+ if (serial_pci_board[i].dev == 0)
-+ continue;
-+ if (brd->board.init_fn)
-+ (brd->board.init_fn)(brd->dev, &brd->board, 0);
-+ if (DEACTIVATE_FUNC(brd->dev))
-+ (DEACTIVATE_FUNC(brd->dev))(brd->dev);
-+ }
-+#endif
-+ if (tmp_buf) {
-+ unsigned long pg = (unsigned long) tmp_buf;
-+ tmp_buf = NULL;
-+ free_page(pg);
-+ }
-+
-+#ifdef ENABLE_SERIAL_PCI
-+ if (serial_pci_driver.name[0])
-+ pci_unregister_driver (&serial_pci_driver);
-+#endif
-+}
-+
-+module_init(rs_init);
-+module_exit(rs_fini);
-+MODULE_DESCRIPTION("Standard/generic (dumb) serial driver");
-+MODULE_AUTHOR("Theodore Ts'o <tytso@mit.edu>");
-+MODULE_LICENSE("GPL");
-+
-+
-+/*
-+ * ------------------------------------------------------------
-+ * Serial console driver
-+ * ------------------------------------------------------------
-+ */
-+#ifdef CONFIG_SERIAL_CONSOLE
-+
-+#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
-+
-+static struct async_struct async_sercons;
-+
-+/*
-+ * Wait for transmitter & holding register to empty
-+ */
-+static inline void wait_for_xmitr(struct async_struct *info)
-+{
-+ unsigned int status, tmout = 1000000;
-+
-+ do {
-+ status = serial_in(info, UART_LSR);
-+
-+ if (status & UART_LSR_BI)
-+ lsr_break_flag = UART_LSR_BI;
-+
-+ if (--tmout == 0)
-+ break;
-+ } while((status & BOTH_EMPTY) != BOTH_EMPTY);
-+
-+ /* Wait for flow control if necessary */
-+ if (info->flags & ASYNC_CONS_FLOW) {
-+ tmout = 1000000;
-+ while (--tmout &&
-+ ((serial_in(info, UART_MSR) & UART_MSR_CTS) == 0));
-+ }
-+}
-+
-+
-+/*
-+ * Print a string to the serial port trying not to disturb
-+ * any possible real use of the port...
-+ *
-+ * The console must be locked when we get here.
-+ */
-+static void serial_console_write(struct console *co, const char *s,
-+ unsigned count)
-+{
-+ static struct async_struct *info = &async_sercons;
-+ int ier;
-+ unsigned i;
-+
-+ /*
-+ * First save the IER then disable the interrupts
-+ */
-+ ier = serial_in(info, UART_IER);
-+ serial_out(info, UART_IER, 0x00);
-+
-+ /*
-+ * Now, do each character
-+ */
-+ for (i = 0; i < count; i++, s++) {
-+ wait_for_xmitr(info);
-+
-+ /*
-+ * Send the character out.
-+ * If a LF, also do CR...
-+ */
-+ serial_out(info, UART_TX, *s);
-+ if (*s == 10) {
-+ wait_for_xmitr(info);
-+ serial_out(info, UART_TX, 13);
-+ }
-+ }
-+
-+ /*
-+ * Finally, Wait for transmitter & holding register to empty
-+ * and restore the IER
-+ */
-+ wait_for_xmitr(info);
-+ serial_out(info, UART_IER, ier);
-+}
-+
-+static kdev_t serial_console_device(struct console *c)
-+{
-+ return MKDEV(TTY_MAJOR, 64 + c->index);
-+}
-+
-+/*
-+ * Setup initial baud/bits/parity/flow control. We do two things here:
-+ * - construct a cflag setting for the first rs_open()
-+ * - initialize the serial port
-+ * Return non-zero if we didn't find a serial port.
-+ */
-+static int __init serial_console_setup(struct console *co, char *options)
-+{
-+ static struct async_struct *info;
-+ struct serial_state *state;
-+ unsigned cval;
-+ int baud = 9600;
-+ int bits = 8;
-+ int parity = 'n';
-+ int doflow = 0;
-+ int cflag = CREAD | HUPCL | CLOCAL;
-+ int quot = 0;
-+ char *s;
-+
-+ if (options) {
-+ baud = simple_strtoul(options, NULL, 10);
-+ s = options;
-+ while(*s >= '0' && *s <= '9')
-+ s++;
-+ if (*s) parity = *s++;
-+ if (*s) bits = *s++ - '0';
-+ if (*s) doflow = (*s++ == 'r');
-+ }
-+
-+ /*
-+ * Now construct a cflag setting.
-+ */
-+ switch(baud) {
-+ case 1200:
-+ cflag |= B1200;
-+ break;
-+ case 2400:
-+ cflag |= B2400;
-+ break;
-+ case 4800:
-+ cflag |= B4800;
-+ break;
-+ case 19200:
-+ cflag |= B19200;
-+ break;
-+ case 38400:
-+ cflag |= B38400;
-+ break;
-+ case 57600:
-+ cflag |= B57600;
-+ break;
-+ case 115200:
-+ cflag |= B115200;
-+ break;
-+ case 9600:
-+ default:
-+ cflag |= B9600;
-+ /*
-+ * Set this to a sane value to prevent a divide error
-+ */
-+ baud = 9600;
-+ break;
-+ }
-+ switch(bits) {
-+ case 7:
-+ cflag |= CS7;
-+ break;
-+ default:
-+ case 8:
-+ cflag |= CS8;
-+ break;
-+ }
-+ switch(parity) {
-+ case 'o': case 'O':
-+ cflag |= PARODD;
-+ break;
-+ case 'e': case 'E':
-+ cflag |= PARENB;
-+ break;
-+ }
-+ co->cflag = cflag;
-+
-+ /*
-+ * Divisor, bytesize and parity
-+ */
-+ state = rs_table + co->index;
-+ if (doflow)
-+ state->flags |= ASYNC_CONS_FLOW;
-+ info = &async_sercons;
-+ info->magic = SERIAL_MAGIC;
-+ info->state = state;
-+ info->port = state->port;
-+ info->flags = state->flags;
-+#ifdef CONFIG_HUB6
-+ info->hub6 = state->hub6;
-+#endif
-+ info->io_type = state->io_type;
-+ info->iomem_base = state->iomem_base;
-+ info->iomem_reg_shift = state->iomem_reg_shift;
-+ quot = state->baud_base / baud;
-+ cval = cflag & (CSIZE | CSTOPB);
-+#if defined(__powerpc__) || defined(__alpha__)
-+ cval >>= 8;
-+#else /* !__powerpc__ && !__alpha__ */
-+ cval >>= 4;
-+#endif /* !__powerpc__ && !__alpha__ */
-+ if (cflag & PARENB)
-+ cval |= UART_LCR_PARITY;
-+ if (!(cflag & PARODD))
-+ cval |= UART_LCR_EPAR;
-+
-+ /*
-+ * Disable UART interrupts, set DTR and RTS high
-+ * and set speed.
-+ */
-+ serial_out(info, UART_LCR, cval | UART_LCR_DLAB); /* set DLAB */
-+ serial_out(info, UART_DLL, quot & 0xff); /* LS of divisor */
-+ serial_out(info, UART_DLM, quot >> 8); /* MS of divisor */
-+ serial_out(info, UART_LCR, cval); /* reset DLAB */
-+ serial_out(info, UART_IER, 0);
-+ serial_out(info, UART_MCR, UART_MCR_DTR | UART_MCR_RTS);
-+
-+ /*
-+ * If we read 0xff from the LSR, there is no UART here.
-+ */
-+ if (serial_in(info, UART_LSR) == 0xff)
-+ return -1;
-+
-+ return 0;
-+}
-+
-+static struct console sercons = {
-+ name: "ttyS",
-+ write: serial_console_write,
-+ device: serial_console_device,
-+ setup: serial_console_setup,
-+ flags: CON_PRINTBUFFER,
-+ index: -1,
-+};
-+
-+/*
-+ * Register console.
-+ */
-+void __init serial_console_init(void)
-+{
-+ register_console(&sercons);
-+}
-+#endif
-+
-+/*
-+ Local variables:
-+ compile-command: "gcc -D__KERNEL__ -I../../include -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -fno-strict-aliasing -pipe -fno-strength-reduce -march=i586 -DMODULE -DMODVERSIONS -include ../../include/linux/modversions.h -DEXPORT_SYMTAB -c serial.c"
-+ End:
-+*/
diff -urN linux.old/drivers/char/ticfg/Makefile linux.dev/drivers/char/ticfg/Makefile
--- linux.old/drivers/char/ticfg/Makefile 1970-01-01 01:00:00.000000000 +0100
+++ linux.dev/drivers/char/ticfg/Makefile 2005-11-10 01:10:46.051587500 +0100
projects / openwrt.git / blobdiff