fix typos (#260)

[openwrt.git] / openwrt / target / linux / package / base-files / files / brcm-2.4 / etc / init.d / S05nvram

diff --git a/openwrt/target/linux/package/base-files/files/brcm-2.4/etc/init.d/S05nvram b/openwrt/target/linux/package/base-files/files/brcm-2.4/etc/init.d/S05nvram
index b3b4997..dbae256 100755 (executable)
--- a/openwrt/target/linux/package/base-files/files/brcm-2.4/etc/init.d/S05nvram
+++ b/openwrt/target/linux/package/base-files/files/brcm-2.4/etc/init.d/S05nvram
@@ -6,6 +6,9 @@
 . /etc/network.overrides
 alias debug=${DEBUG:-:}
 
+# WGT634u
+[ "$(/usr/bin/head -c4 /dev/mtdblock/1 | /usr/bin/tail -c3)" = "ELF" ] && exit
+
 remap () {
        for type in lan wifi wan pppoe
        do
@@ -21,21 +24,21 @@ nvram_default() {
 }
 
 nvram_set() { # for the linksys fixup part
-       [ "$(nvram get "$1")" = "$2" ] || {
+       [ "$(nvram get "$1")" = "$2" -a "$2" != "" ] || {
                COMMIT=1
-               nvram set "$1=$2"
+               /usr/sbin/nvram set "$1=$2"
        }
 }
 
 # work around braindead CFE defaults in linksys routers
 boardtype=$(nvram get boardtype)
 boardflags=$(($(nvram get boardflags)))
-[ "$boardtype" = "bcm4710dev" ] && boardtype="0xdeadbeef"
+[ "$boardtype" = "bcm94710dev" ] && boardtype="0xdeadbeef"
 adm_switch="$(( ($boardflags & 0x80) >> 7 ))"
 case "$(( $boardtype ))" in
        "$((0x708))")
                if [ "$adm_switch" = 0 ]; then
-                       nvram_set sdram_init 0x010b
+                       nvram_set sdram_init "$(printf 0x%04x $(( $(/usr/sbin/nvram get sdram_init) | 0x0100 )))"
                        [ "$COMMIT" = 1 ] && {
                                nvram_set sdram_config 0x0062
                                nvram_set clkfreq 216
@@ -49,7 +52,7 @@ case "$(( $boardtype ))" in
                fi
        ;;
        "$((0x467))")
-               nvram_set sdram_init 0x010c
+               nvram_set sdram_init "$(printf 0x%04x $(( $(/usr/sbin/nvram get sdram_init) | 0x0100 )))"
                [ "$COMMIT" = 1 ] && {
                        nvram_set sdram_config 0x0062
                        nvram_set sdram_ncdl 0x0
@@ -104,6 +107,14 @@ case "$(nvram get productid)" in
                nvram set lan_ifnames="eth1 eth2"
                nvram set wan_ifname="none"
        ;;
+       *)
+               # wl-500g defaults. these are placed here, because WL-HDD and WL-300g
+               # might have the same nvram settings.
+               [ "$(nvram get boardnum)" = "asusX" \
+               -a "$(nvram get boardtype)" = "bcm94710dev" ] && {
+                       nvram_default wan_device "eth1"
+               }
+       ;;
 esac
 
 # hacks for wap54g hardware
@@ -127,21 +138,12 @@ esac
        nvram_default wl0id 0x4320
 }
 
-WAN_PROTO="$(nvram get wan_proto)"
-[  "$WAN_PROTO" = "pptp" \
--o "$WAN_PROTO" = "pppoe" ] && {
-       WAN_IFNAME="$(nvram get wan_ifname)"
-       [ "${WAN_IFNAME%%[0-9]*}" = "ppp" ] || {
-               nvram set wan_ifname=ppp0
-               nvram set ${WAN_PROTO}_ifname="$WAN_IFNAME"
-       }
-}
-
 # defaults
 nvram_default lan_ifname "br0"
 nvram_default lan_ifnames "$FAILSAFE_ifnames"
 
 nvram_default wan_ifname "vlan1"
+nvram_default wan_device "vlan1"
 nvram_default wan_proto "dhcp"
 
 nvram_default wl0_ssid OpenWrt
@@ -149,6 +151,13 @@ nvram_default wl0_mode ap
 nvram_default wl0_infra 1
 nvram_default wl0_radio 1
 
+WAN_PROTO="$(nvram get wan_proto)"
+WAN_IFNAME="$(nvram get wan_ifname)"
+case "$WAN_PROTO" in
+       pp*) [ "${WAN_IFNAME%%[0-9]*}" = "ppp" ] || nvram set wan_ifname=ppp0;;
+       *) [ "${WAN_IFNAME%%[0-9]*}" = "ppp" ] && nvram set wan_ifname="$(nvram get wan_device)";;
+esac
+
 [ "$(nvram get il0macaddr)" = "00:90:4c:5f:00:2a" ] && {
        # if default wifi mac, set two higher than the lan mac
        nvram set il0macaddr=$(nvram get et0macaddr|