-diff -urN linux.old/arch/mips/ar7/ar7/jump.S linux.dev/arch/mips/ar7/ar7/jump.S
---- linux.old/arch/mips/ar7/ar7/jump.S 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/ar7/ar7/jump.S 2005-07-12 02:59:26.167672328 +0200
-@@ -0,0 +1,89 @@
-+/*
-+ * $Id$
-+ * Copyright (C) $Date$ $Author$
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-+ *
-+ */
-+
-+#include <linux/config.h>
-+#include <linux/threads.h>
+diff -urN linux.old/arch/mips/Makefile linux.dev/arch/mips/Makefile
+--- linux.old/arch/mips/Makefile 2005-10-21 16:43:16.316951500 +0200
++++ linux.dev/arch/mips/Makefile 2005-11-10 01:10:45.775570250 +0100
+@@ -369,6 +369,16 @@
+ endif
+
+ #
++# Texas Instruments AR7
++#
+
-+#include <asm/asm.h>
-+#include <asm/cacheops.h>
-+#include <asm/current.h>
-+#include <asm/offset.h>
-+#include <asm/processor.h>
-+#include <asm/regdef.h>
-+#include <asm/cachectl.h>
-+#include <asm/mipsregs.h>
-+#include <asm/stackframe.h>
++ifdef CONFIG_AR7
++LIBS += arch/mips/ar7/ar7.o
++SUBDIRS += arch/mips/ar7
++LOADADDR += 0x94020000
++endif
+
-+.text
-+
-+.set noreorder
-+.set noat
-+
-+/* TLB Miss Vector */
-+
-+LEAF(jump_tlb_miss)
-+ .set mips2
-+ lui k0,0x9400
-+ ori k0,0
-+ jr k0
-+ nop
-+END(jump_tlb_miss)
-+
-+ /* Unused TLB Miss Vector */
-+
-+LEAF(jump_tlb_miss_unused)
-+ .set mips2
-+ lui k0,0x9400
-+ ori k0,0x80
-+ jr k0
-+ nop
-+END(jump_tlb_miss_unused)
-+
-+ /* Cache Error Vector */
-+
-+LEAF(jump_cache_error)
-+ .set mips2
-+ lui k0,0x9400
-+ ori k0,0x100
-+ jr k0
-+ nop
-+END(jump_cache_error)
-+
-+ /* General Exception */
-+
-+LEAF(jump_general_exception)
-+ .set mips2
-+ lui k0,0x9400
-+ ori k0,0x180
-+ jr k0
-+ nop
-+END(jump_general_exception)
-+
-+ /* Dedicated Interrupt */
-+
-+LEAF(jump_dedicated_interrupt)
-+ .set mips2
-+ lui k0,0x9400
-+ ori k0,0x200
-+ jr k0
-+ nop
-+END(jump_dedicated_interrupt)
-+
-+ .set at
-diff -urN linux.old/arch/mips/ar7/ar7/Makefile linux.dev/arch/mips/ar7/ar7/Makefile
---- linux.old/arch/mips/ar7/ar7/Makefile 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/ar7/ar7/Makefile 2005-07-12 02:59:26.167672328 +0200
-@@ -0,0 +1,31 @@
-+# $Id$
-+# Copyright (C) $Date$ $Author$
+#
-+# This program is free software; you can redistribute it and/or modify
-+# it under the terms of the GNU General Public License as published by
-+# the Free Software Foundation; either version 2 of the License, or
-+# (at your option) any later version.
-+#
-+# This program is distributed in the hope that it will be useful,
-+# but WITHOUT ANY WARRANTY; without even the implied warranty of
-+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+# GNU General Public License for more details.
-+#
-+# You should have received a copy of the GNU General Public License
-+# along with this program; if not, write to the Free Software
-+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-+
+ # DECstation family
+ #
+ ifdef CONFIG_DECSTATION
+diff -urN linux.old/arch/mips/ar7/Makefile linux.dev/arch/mips/ar7/Makefile
+--- linux.old/arch/mips/ar7/Makefile 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/ar7/Makefile 2005-11-10 01:13:51.443173750 +0100
+@@ -0,0 +1,14 @@
+.S.s:
+ $(CPP) $(AFLAGS) $< -o $*.s
+
+.S.o:
+ $(CC) $(AFLAGS) -c $< -o $*.o
+
-+EXTRA_CFLAGS := -DLITTLE_ENDIAN -D_LINK_KSEG0_
-+
++EXTRA_CFLAGS := -I$(TOPDIR)/include/asm/ar7 -DLITTLE_ENDIAN -D_LINK_KSEG0_
+O_TARGET := ar7.o
+
-+export-objs := misc.o
-+obj-y += paging.o jump.o misc.o
++obj-y := tnetd73xx_misc.o misc.o
++export-objs := misc.o irq.o init.o
++obj-y += setup.o irq.o int-handler.o reset.o init.o psp_env.o memory.o promlib.o cmdline.o
+
+include $(TOPDIR)/Rules.make
-diff -urN linux.old/arch/mips/ar7/ar7/misc.c linux.dev/arch/mips/ar7/ar7/misc.c
---- linux.old/arch/mips/ar7/ar7/misc.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/ar7/ar7/misc.c 2005-07-12 02:59:26.168672176 +0200
-@@ -0,0 +1,319 @@
-+#include <asm/ar7/sangam.h>
-+#include <asm/ar7/avalanche_misc.h>
-+#include <linux/module.h>
-+#include <linux/spinlock.h>
+diff -urN linux.old/arch/mips/ar7/cmdline.c linux.dev/arch/mips/ar7/cmdline.c
+--- linux.old/arch/mips/ar7/cmdline.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/ar7/cmdline.c 2005-11-10 01:14:16.372731750 +0100
+@@ -0,0 +1,88 @@
++/*
++ * Carsten Langgaard, carstenl@mips.com
++ * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
++ *
++ * This program is free software; you can distribute it and/or modify it
++ * under the terms of the GNU General Public License (Version 2) as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ * for more details.
++ *
++ * You should have received a copy of the GNU General Public License along
++ * with this program; if not, write to the Free Software Foundation, Inc.,
++ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++ *
++ * Kernel command line creation using the prom monitor (YAMON) argc/argv.
++ */
++#include <linux/init.h>
++#include <linux/string.h>
+
-+#define TRUE 1
++#include <asm/bootinfo.h>
+
-+static unsigned int avalanche_vbus_freq;
++extern int prom_argc;
++extern int *_prom_argv;
+
-+REMOTE_VLYNQ_DEV_RESET_CTRL_FN p_remote_vlynq_dev_reset_ctrl = NULL;
++/*
++ * YAMON (32-bit PROM) pass arguments and environment as 32-bit pointer.
++ * This macro take care of sign extension.
++ */
++#define prom_argv(index) ((char *)(((int *)(int)_prom_argv)[(index)]))
+
-+/*****************************************************************************
-+ * Reset Control Module.
-+ *****************************************************************************/
-+void avalanche_reset_ctrl(unsigned int module_reset_bit,
-+ AVALANCHE_RESET_CTRL_T reset_ctrl)
-+{
-+ volatile unsigned int *reset_reg = (unsigned int*) AVALANCHE_RST_CTRL_PRCR;
-+
-+ if(module_reset_bit >= 32 && module_reset_bit < 64)
-+ return;
++char arcs_cmdline[CL_SIZE];
++#ifdef CONFIG_CMDLINE_BOOL
++char __initdata cfg_cmdline[] = CONFIG_CMDLINE;
++#endif
+
-+ if(module_reset_bit >= 64)
-+ {
-+ if(p_remote_vlynq_dev_reset_ctrl)
-+ return(p_remote_vlynq_dev_reset_ctrl(module_reset_bit - 64, reset_ctrl));
-+ else
-+ return;
-+ }
-+
-+ if(reset_ctrl == OUT_OF_RESET)
-+ *reset_reg |= 1 << module_reset_bit;
-+ else
-+ *reset_reg &= ~(1 << module_reset_bit);
++char * __init prom_getcmdline(void)
++{
++ return &(arcs_cmdline[0]);
+}
+
-+AVALANCHE_RESET_CTRL_T avalanche_get_reset_status(unsigned int module_reset_bit)
++
++void __init prom_init_cmdline(void)
+{
-+ volatile unsigned int *reset_reg = (unsigned int*) AVALANCHE_RST_CTRL_PRCR;
++ char *cp, *end;
++ int actr;
++ char *env_cmdline = prom_getenv("kernel_args");
++ size_t len;
+
-+ return (((*reset_reg) & (1 << module_reset_bit)) ? OUT_OF_RESET : IN_RESET );
-+}
++ actr = 1; /* Always ignore argv[0] */
+
-+void avalanche_sys_reset(AVALANCHE_SYS_RST_MODE_T mode)
-+{
-+ volatile unsigned int *sw_reset_reg = (unsigned int*) AVALANCHE_RST_CTRL_SWRCR;
-+ *sw_reset_reg = mode;
++ cp = end = &(arcs_cmdline[0]);
++ end += sizeof(arcs_cmdline);
++
++ if (env_cmdline) {
++ len = strlen(env_cmdline);
++ if (len > end - cp - 1)
++ len = end - cp - 1;
++ strncpy(cp, env_cmdline, len);
++ cp += len;
++ *cp++ = ' ';
++ }
++#ifdef CONFIG_CMDLINE_BOOL
++ else {
++ len = strlen(cfg_cmdline);
++ if (len > end - cp - 1)
++ len = end - cp - 1;
++ strncpy(cp, cfg_cmdline, len);
++ cp += len;
++ *cp++ = ' ';
++ }
++#endif
++
++ while(actr < prom_argc) {
++ len = strlen(prom_argv(actr));
++ if (len > end - cp - 1)
++ break;
++ strncpy(cp, prom_argv(actr), len);
++ cp += len;
++ *cp++ = ' ';
++ actr++;
++ }
++ if (cp != &(arcs_cmdline[0])) /* get rid of trailing space */
++ --cp;
++ *cp = '\0';
+}
+diff -urN linux.old/arch/mips/ar7/init.c linux.dev/arch/mips/ar7/init.c
+--- linux.old/arch/mips/ar7/init.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/ar7/init.c 2005-11-10 01:10:45.795571500 +0100
+@@ -0,0 +1,199 @@
++/*
++ * Carsten Langgaard, carstenl@mips.com
++ * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
++ *
++ * This program is free software; you can distribute it and/or modify it
++ * under the terms of the GNU General Public License (Version 2) as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ * for more details.
++ *
++ * You should have received a copy of the GNU General Public License along
++ * with this program; if not, write to the Free Software Foundation, Inc.,
++ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++ *
++ * PROM library initialisation code.
++ */
++#include <linux/config.h>
++#include <linux/init.h>
++#include <linux/string.h>
++#include <linux/kernel.h>
++#include <linux/module.h>
+
-+#define AVALANCHE_RST_CTRL_RSR_MASK 0x3
++#include <asm/io.h>
++#include <asm/mips-boards/prom.h>
++#include <asm/mips-boards/generic.h>
+
-+AVALANCHE_SYS_RESET_STATUS_T avalanche_get_sys_last_reset_status()
-+{
-+ volatile unsigned int *sys_reset_status = (unsigned int*) AVALANCHE_RST_CTRL_RSR;
++#include <asm/ar7/adam2_env.h>
+
-+ return ( (AVALANCHE_SYS_RESET_STATUS_T) (*sys_reset_status & AVALANCHE_RST_CTRL_RSR_MASK) );
-+}
++int prom_argc;
++int *_prom_argv, *_prom_envp;
+
++/* max # of Adam2 environment variables */
++#define MAX_ENV_ENTRY 80
+
-+/*****************************************************************************
-+ * Power Control Module
-+ *****************************************************************************/
-+#define AVALANCHE_GLOBAL_POWER_DOWN_MASK 0x3FFFFFFF /* bit 31, 30 masked */
-+#define AVALANCHE_GLOBAL_POWER_DOWN_BIT 30 /* shift to bit 30, 31 */
++static t_env_var local_envp[MAX_ENV_ENTRY];
++static int env_type = 0;
++int init_debug = 0;
+
++unsigned int max_env_entry;
+
-+void avalanche_power_ctrl(unsigned int module_power_bit, AVALANCHE_POWER_CTRL_T power_ctrl)
++extern char *prom_psp_getenv(char *envname);
++
++static inline char *prom_adam2_getenv(char *envname)
+{
-+ volatile unsigned int *power_reg = (unsigned int*)AVALANCHE_POWER_CTRL_PDCR;
++ /*
++ * Return a pointer to the given environment variable.
++ * In 64-bit mode: we're using 64-bit pointers, but all pointers
++ * in the PROM structures are only 32-bit, so we need some
++ * workarounds, if we are running in 64-bit mode.
++ */
++ int i;
++ t_env_var *env = (t_env_var *) local_envp;
+
-+ if (power_ctrl == POWER_CTRL_POWER_DOWN)
-+ /* power down the module */
-+ *power_reg |= (1 << module_power_bit);
-+ else
-+ /* power on the module */
-+ *power_reg &= (~(1 << module_power_bit));
++ if (strcmp("bootloader", envname) == 0)
++ return "Adam2";
++
++ i = strlen(envname);
++ while (env->name) {
++ if(strncmp(envname, env->name, i) == 0) {
++ return(env->val);
++ }
++ env++;
++ }
++
++ return NULL;
+}
+
-+AVALANCHE_POWER_CTRL_T avalanche_get_power_status(unsigned int module_power_bit)
-+{
-+ volatile unsigned int *power_status_reg = (unsigned int*)AVALANCHE_POWER_CTRL_PDCR;
++/* XXX "bootloader" won't be returned.
++ * Better make it an element of local_envp */
++static inline t_env_var *
++prom_adam2_iterenv(t_env_var *env) {
++ if (!env)
++ env = local_envp;
++ else
++ env++;
++ if (env - local_envp > MAX_ENV_ENTRY || !env->name)
++ return 0;
++ return env;
++}
+
-+ return (((*power_status_reg) & (1 << module_power_bit)) ? POWER_CTRL_POWER_DOWN : POWER_CTRL_POWER_UP);
++char *prom_getenv(char *envname)
++{
++ if (env_type == 1)
++ return prom_psp_getenv(envname);
++ else
++ return prom_adam2_getenv(envname);
+}
+
-+void avalanche_set_global_power_mode(AVALANCHE_SYS_POWER_MODE_T power_mode)
++t_env_var *
++prom_iterenv(t_env_var *last)
+{
-+ volatile unsigned int *power_status_reg = (unsigned int*)AVALANCHE_POWER_CTRL_PDCR;
++ if (env_type == 1)
++ return 0; /* not yet implemented */
++ return prom_adam2_iterenv(last);
++}
+
-+ *power_status_reg &= AVALANCHE_GLOBAL_POWER_DOWN_MASK;
-+ *power_status_reg |= ( power_mode << AVALANCHE_GLOBAL_POWER_DOWN_BIT);
++static inline unsigned char str2hexnum(unsigned char c)
++{
++ if (c >= '0' && c <= '9')
++ return c - '0';
++ if (c >= 'a' && c <= 'f')
++ return c - 'a' + 10;
++ return 0; /* foo */
+}
+
-+AVALANCHE_SYS_POWER_MODE_T avalanche_get_global_power_mode(void)
++static inline void str2eaddr(unsigned char *ea, unsigned char *str)
+{
-+ volatile unsigned int *power_status_reg = (unsigned int*)AVALANCHE_POWER_CTRL_PDCR;
++ int i;
+
-+ return((AVALANCHE_SYS_POWER_MODE_T) (((*power_status_reg) & (~AVALANCHE_GLOBAL_POWER_DOWN_MASK))
-+ >> AVALANCHE_GLOBAL_POWER_DOWN_BIT));
++ for (i = 0; i < 6; i++) {
++ unsigned char num;
++
++ if((*str == '.') || (*str == ':'))
++ str++;
++ num = str2hexnum(*str++) << 4;
++ num |= (str2hexnum(*str++));
++ ea[i] = num;
++ }
+}
+
-+/*****************************************************************************
-+ * GPIO Control
-+ *****************************************************************************/
++int get_ethernet_addr(char *ethernet_addr)
++{
++ char *ethaddr_str;
+
-+/****************************************************************************
-+ * FUNCTION: avalanche_gpio_init
-+ ***************************************************************************/
-+void avalanche_gpio_init(void)
-+{
-+ spinlock_t closeLock;
-+ unsigned int closeFlag;
-+ volatile unsigned int *reset_reg = (unsigned int*) AVALANCHE_RST_CTRL_PRCR;
-+ spin_lock_irqsave(&closeLock, closeFlag);
-+ *reset_reg |= (1 << AVALANCHE_GPIO_RESET_BIT);
-+ spin_unlock_irqrestore(&closeLock, closeFlag);
-+}
-+
-+/****************************************************************************
-+ * FUNCTION: avalanche_gpio_ctrl
-+ ***************************************************************************/
-+int avalanche_gpio_ctrl(unsigned int gpio_pin,
-+ AVALANCHE_GPIO_PIN_MODE_T pin_mode,
-+ AVALANCHE_GPIO_PIN_DIRECTION_T pin_direction)
-+{
-+ spinlock_t closeLock;
-+ unsigned int closeFlag;
-+ volatile unsigned int *gpio_ctrl = (unsigned int*)AVALANCHE_GPIO_ENBL;
-+
-+ if(gpio_pin >= 32)
-+ return(-1);
-+
-+ spin_lock_irqsave(&closeLock, closeFlag);
-+
-+ if(pin_mode == GPIO_PIN)
-+ {
-+ *gpio_ctrl |= (1 << gpio_pin);
++ ethaddr_str = prom_getenv("ethaddr");
++ if (!ethaddr_str) {
++ printk("ethaddr not set in boot prom\n");
++ return -1;
++ }
++ str2eaddr(ethernet_addr, ethaddr_str);
+
-+ gpio_ctrl = (unsigned int*)AVALANCHE_GPIO_DIR;
-+
-+ if(pin_direction == GPIO_INPUT_PIN)
-+ *gpio_ctrl |= (1 << gpio_pin);
-+ else
-+ *gpio_ctrl &= ~(1 << gpio_pin);
-+ }
-+ else /* FUNCTIONAL PIN */
-+ {
-+ *gpio_ctrl &= ~(1 << gpio_pin);
-+ }
-+
-+ spin_unlock_irqrestore(&closeLock, closeFlag);
++ if (init_debug > 1) {
++ int i;
++ printk("get_ethernet_addr: ");
++ for (i=0; i<5; i++)
++ printk("%02x:", (unsigned char)*(ethernet_addr+i));
++ printk("%02x\n", *(ethernet_addr+i));
++ }
+
-+ return (0);
++ return 0;
+}
+
-+/****************************************************************************
-+ * FUNCTION: avalanche_gpio_out
-+ ***************************************************************************/
-+int avalanche_gpio_out_bit(unsigned int gpio_pin, int value)
-+{
-+ spinlock_t closeLock;
-+ unsigned int closeFlag;
-+ volatile unsigned int *gpio_out = (unsigned int*) AVALANCHE_GPIO_DATA_OUT;
-+
-+ if(gpio_pin >= 32)
-+ return(-1);
-+
-+ spin_lock_irqsave(&closeLock, closeFlag);
-+ if(value == TRUE)
-+ *gpio_out |= 1 << gpio_pin;
-+ else
-+ *gpio_out &= ~(1 << gpio_pin);
-+ spin_unlock_irqrestore(&closeLock, closeFlag);
++struct psbl_rec {
++ unsigned int psbl_size;
++ unsigned int env_base;
++ unsigned int env_size;
++ unsigned int ffs_base;
++ unsigned int ffs_size;
++};
+
-+ return(0);
-+}
++static const char psp_env_version[] = "TIENV0.8";
+
-+/****************************************************************************
-+ * FUNCTION: avalanche_gpio_in
-+ ***************************************************************************/
-+int avalanche_gpio_in_bit(unsigned int gpio_pin)
++int __init prom_init(int argc, char **argv, char **envp)
+{
-+ spinlock_t closeLock;
-+ unsigned int closeFlag;
-+ volatile unsigned int *gpio_in = (unsigned int*) AVALANCHE_GPIO_DATA_IN;
-+ int ret_val = 0;
-+
-+ if(gpio_pin >= 32)
-+ return(-1);
++ int i;
+
-+ spin_lock_irqsave(&closeLock, closeFlag);
-+ ret_val = ((*gpio_in) & (1 << gpio_pin));
-+ spin_unlock_irqrestore(&closeLock, closeFlag);
-+
-+ return (ret_val);
-+}
++ t_env_var *env = (t_env_var *) envp;
++ struct psbl_rec *psbl = (struct psbl_rec *)(KSEG1ADDR(0x94000300));
++ void *psp_env = (void *)KSEG1ADDR(psbl->env_base);
+
-+/****************************************************************************
-+ * FUNCTION: avalanche_gpio_out_val
-+ ***************************************************************************/
-+int avalanche_gpio_out_value(unsigned int out_val, unsigned int out_mask,
-+ unsigned int reg_index)
-+{
-+ spinlock_t closeLock;
-+ unsigned int closeFlag;
-+ volatile unsigned int *gpio_out = (unsigned int*) AVALANCHE_GPIO_DATA_OUT;
++ prom_argc = argc;
++ _prom_argv = (int *)argv;
++ _prom_envp = (int *)envp;
+
-+ if(reg_index > 0)
-+ return(-1);
++ if(strcmp(psp_env, psp_env_version) == 0) {
++ /* PSPBOOT */
+
-+ spin_lock_irqsave(&closeLock, closeFlag);
-+ *gpio_out &= ~out_mask;
-+ *gpio_out |= out_val;
-+ spin_unlock_irqrestore(&closeLock, closeFlag);
++ env_type = 1;
++ _prom_envp = psp_env;
++ max_env_entry = (psbl->env_size / 16) - 1;
++ } else {
++ /* Copy what we need locally so we are not dependent on
++ * bootloader RAM. In Adam2, the environment parameters
++ * are in flash but the table that references them is in
++ * RAM
++ */
+
-+ return(0);
-+}
++ for(i=0; i < MAX_ENV_ENTRY; i++, env++) {
++ if (env->name) {
++ local_envp[i].name = env->name;
++ local_envp[i].val = env->val;
++ } else {
++ local_envp[i].name = NULL;
++ local_envp[i].val = NULL;
++ }
++ }
++ }
+
-+/****************************************************************************
-+ * FUNCTION: avalanche_gpio_in_value
-+ ***************************************************************************/
-+int avalanche_gpio_in_value(unsigned int* in_val, unsigned int reg_index)
-+{
-+ spinlock_t closeLock;
-+ unsigned int closeFlag;
-+ volatile unsigned int *gpio_in = (unsigned int*) AVALANCHE_GPIO_DATA_IN;
-+
-+ if(reg_index > 0)
-+ return(-1);
++ set_io_port_base(0);
+
-+ spin_lock_irqsave(&closeLock, closeFlag);
-+ *in_val = *gpio_in;
-+ spin_unlock_irqrestore(&closeLock, closeFlag);
++ prom_printf("\nLINUX started...\n");
++ prom_init_cmdline();
++ prom_meminit();
+
-+ return (0);
++ return 0;
+}
-+
-+/***********************************************************************
+diff -urN linux.old/arch/mips/ar7/int-handler.S linux.dev/arch/mips/ar7/int-handler.S
+--- linux.old/arch/mips/ar7/int-handler.S 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/ar7/int-handler.S 2005-11-10 01:12:43.938955000 +0100
+@@ -0,0 +1,63 @@
++/*
++ * Copyright 2004 PMC-Sierra Inc.
++ * Author: Manish Lachwani (lachwani@pmc-sierra.com)
++ * Adaption for AR7: Enrik Berkhan <enrik@akk.org>
+ *
-+ * Wakeup Control Module for TNETV1050 Communication Processor
++ * First-level interrupt dispatcher for the TI AR7
+ *
-+ ***********************************************************************/
-+
-+#define AVALANCHE_WAKEUP_POLARITY_BIT 16
-+
-+void avalanche_wakeup_ctrl(AVALANCHE_WAKEUP_INTERRUPT_T wakeup_int,
-+ AVALANCHE_WAKEUP_CTRL_T wakeup_ctrl,
-+ AVALANCHE_WAKEUP_POLARITY_T wakeup_polarity)
-+{
-+ volatile unsigned int *wakeup_status_reg = (unsigned int*) AVALANCHE_WAKEUP_CTRL_WKCR;
-+
-+ /* enable/disable */
-+ if (wakeup_ctrl == WAKEUP_ENABLED)
-+ /* enable wakeup */
-+ *wakeup_status_reg |= wakeup_int;
-+ else
-+ /* disable wakeup */
-+ *wakeup_status_reg &= (~wakeup_int);
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License as published by the
++ * Free Software Foundation; either version 2 of the License, or (at your
++ * option) any later version.
++ */
++#define __ASSEMBLY__
++#include <linux/config.h>
++#include <asm/asm.h>
++#include <asm/mipsregs.h>
++#include <asm/addrspace.h>
++#include <asm/regdef.h>
++#include <asm/stackframe.h>
+
-+ /* set polarity */
-+ if (wakeup_polarity == WAKEUP_ACTIVE_LOW)
-+ *wakeup_status_reg |= (wakeup_int << AVALANCHE_WAKEUP_POLARITY_BIT);
-+ else
-+ *wakeup_status_reg &= ~(wakeup_int << AVALANCHE_WAKEUP_POLARITY_BIT);
-+}
++/*
++ * First level interrupt dispatcher for TI AR7 based boards
++ */
+
-+void avalanche_set_vbus_freq(unsigned int new_vbus_freq)
-+{
-+ avalanche_vbus_freq = new_vbus_freq;
-+}
++ .align 5
++ NESTED(ar7IRQ, PT_SIZE, sp)
++ SAVE_ALL
++ CLI
++ .set at
+
-+unsigned int avalanche_get_vbus_freq()
-+{
-+ return(avalanche_vbus_freq);
-+}
++ mfc0 t0, CP0_CAUSE
++ mfc0 t2, CP0_STATUS
+
-+unsigned int avalanche_get_chip_version_info()
-+{
-+ return(*(volatile unsigned int*)AVALANCHE_CVR);
-+}
++ and t0, t2
+
-+SET_MDIX_ON_CHIP_FN_T p_set_mdix_on_chip_fn = NULL;
++ andi t1, t0, STATUSF_IP2 /* hw0 hardware interrupt */
++ bnez t1, ll_hw0_irq
+
-+int avalanche_set_mdix_on_chip(unsigned int base_addr, unsigned int operation)
-+{
-+ if(p_set_mdix_on_chip_fn)
-+ return (p_set_mdix_on_chip_fn(base_addr, operation));
-+ else
-+ return(-1);
-+}
++ andi t1, t0, STATUSF_IP7 /* R4k CPU timer */
++ bnez t1, ll_timer_irq
+
-+unsigned int avalanche_is_mdix_on_chip(void)
-+{
-+ return(p_set_mdix_on_chip_fn ? 1:0);
-+}
++ .set reorder
+
-+EXPORT_SYMBOL(avalanche_reset_ctrl);
-+EXPORT_SYMBOL(avalanche_get_reset_status);
-+EXPORT_SYMBOL(avalanche_sys_reset);
-+EXPORT_SYMBOL(avalanche_get_sys_last_reset_status);
-+EXPORT_SYMBOL(avalanche_power_ctrl);
-+EXPORT_SYMBOL(avalanche_get_power_status);
-+EXPORT_SYMBOL(avalanche_set_global_power_mode);
-+EXPORT_SYMBOL(avalanche_get_global_power_mode);
-+EXPORT_SYMBOL(avalanche_set_mdix_on_chip);
-+EXPORT_SYMBOL(avalanche_is_mdix_on_chip);
++ /* wrong alarm or masked ... */
++ j spurious_interrupt
++ nop
++ END(ar7IRQ)
+
-+EXPORT_SYMBOL(avalanche_gpio_init);
-+EXPORT_SYMBOL(avalanche_gpio_ctrl);
-+EXPORT_SYMBOL(avalanche_gpio_out_bit);
-+EXPORT_SYMBOL(avalanche_gpio_in_bit);
-+EXPORT_SYMBOL(avalanche_gpio_out_value);
-+EXPORT_SYMBOL(avalanche_gpio_in_value);
++ .align 5
+
-+EXPORT_SYMBOL(avalanche_set_vbus_freq);
-+EXPORT_SYMBOL(avalanche_get_vbus_freq);
++ll_hw0_irq:
++ li a0, 2
++ move a1, sp
++ jal do_IRQ
++ j ret_from_irq
+
-+EXPORT_SYMBOL(avalanche_get_chip_version_info);
++ll_timer_irq:
++ li a0, 7
++ move a1, sp
++ jal do_IRQ
++ j ret_from_irq
+
-diff -urN linux.old/arch/mips/ar7/ar7/paging.c linux.dev/arch/mips/ar7/ar7/paging.c
---- linux.old/arch/mips/ar7/ar7/paging.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/ar7/ar7/paging.c 2005-07-12 02:59:26.168672176 +0200
-@@ -0,0 +1,314 @@
++
+diff -urN linux.old/arch/mips/ar7/irq.c linux.dev/arch/mips/ar7/irq.c
+--- linux.old/arch/mips/ar7/irq.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/ar7/irq.c 2005-11-10 01:12:43.938955000 +0100
+@@ -0,0 +1,427 @@
+/*
-+ * -*- linux-c -*-
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file "COPYING" in the main directory of this archive
-+ * for more details.
++ * Nitin Dhingra, iamnd@ti.com
++ * Copyright (C) 2002 Texas Instruments, Inc. All rights reserved.
++ *
++ * ########################################################################
++ *
++ * This program is free software; you can distribute it and/or modify it
++ * under the terms of the GNU General Public License (Version 2) as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ * for more details.
++ *
++ * You should have received a copy of the GNU General Public License along
++ * with this program; if not, write to the Free Software Foundation, Inc.,
++ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++ *
++ * ########################################################################
+ *
-+ * Copyright (C) 2002 by Jeff Harrell (jharrell@ti.com)
-+ * Copyright (C) 2002 Texas Instruments, Inc.
++ * Routines for generic manipulation of the interrupts found on the Texas
++ * Instruments avalanche board
+ *
+ */
+
-+/*
-+ * This file takes care of the "memory hole" issue that exists with the standard
-+ * linux kernel and the TI Avalanche ASIC. The Avalanche ASIC requires an offset
-+ * of 0x14000000 due to the ASIC's memory map constraints. This file corrects the
-+ * paging tables so that the only reflect valid memory (i.e. > 0x14000000)
-+ *
-+ * -JAH
-+ */
-+#include <linux/config.h>
-+#include <linux/signal.h>
-+#include <linux/sched.h>
-+#include <linux/kernel.h>
-+#include <linux/errno.h>
-+#include <linux/string.h>
-+#include <linux/types.h>
-+#include <linux/ptrace.h>
-+#include <linux/mman.h>
-+#include <linux/mm.h>
-+#include <linux/swap.h>
-+#include <linux/smp.h>
+#include <linux/init.h>
-+#ifdef CONFIG_BLK_DEV_INITRD
-+#include <linux/blk.h>
-+#endif /* CONFIG_BLK_DEV_INITRD */
-+#include <linux/highmem.h>
-+#include <linux/bootmem.h>
-+
-+#include <asm/processor.h>
-+#include <asm/system.h>
-+#include <asm/uaccess.h>
-+#include <asm/pgtable.h>
-+#include <asm/pgalloc.h>
-+#include <asm/mmu_context.h>
-+#include <asm/io.h>
-+#include <asm/tlb.h>
-+#include <asm/cpu.h>
++#include <linux/interrupt.h>
+
-+#define __MEMORY_START CONFIG_AR7_MEMORY
++#include <asm/irq.h>
++#include <asm/mipsregs.h>
++#include <asm/ar7/ar7.h>
++#include <asm/ar7/avalanche_intc.h>
+
-+#ifdef CONFIG_DISCONTIGMEM
-+pg_data_t discontig_page_data[NR_NODES];
-+bootmem_data_t discontig_node_bdata[NR_NODES];
-+#endif
++#define shutdown_avalanche_irq disable_avalanche_irq
++#define mask_and_ack_avalanche_irq disable_avalanche_irq
+
-+static unsigned long totalram_pages;
-+/* static unsigned long totalhigh_pages; */
++static unsigned int startup_avalanche_irq(unsigned int irq);
++static void end_avalanche_irq(unsigned int irq);
++void enable_avalanche_irq(unsigned int irq_nr);
++void disable_avalanche_irq(unsigned int irq_nr);
++void ar7_hw0_interrupt(int interrupt, void *dev, struct pt_regs *regs);
+
-+#define START_PFN (NODE_DATA(0)->bdata->node_boot_start >> PAGE_SHIFT)
-+#define MAX_LOW_PFN (NODE_DATA(0)->bdata->node_low_pfn)
++static struct hw_interrupt_type avalanche_irq_type = {
++ "AR7",
++ startup_avalanche_irq,
++ shutdown_avalanche_irq,
++ enable_avalanche_irq,
++ disable_avalanche_irq,
++ mask_and_ack_avalanche_irq,
++ end_avalanche_irq,
++ NULL
++};
+
-+#define PFN_UP(x) (((x) + PAGE_SIZE - 1) >> PAGE_SHIFT)
-+#define PFN_DOWN(x) ((x) >> PAGE_SHIFT)
-+#define PFN_PHYS(x) ((x) << PAGE_SHIFT)
++static int ar7_irq_base;
+
-+unsigned long bootmap_size;
++static struct irqaction ar7_hw0_action = {
++ ar7_hw0_interrupt, 0, 0, "AR7 on hw0", NULL, NULL
++};
+
-+extern char *prom_getenv(char *envname);
++struct avalanche_ictrl_regs *avalanche_hw0_icregs; /* Interrupt control regs (primary) */
++struct avalanche_exctrl_regs *avalanche_hw0_ecregs; /* Exception control regs (secondary) */
++struct avalanche_ipace_regs *avalanche_hw0_ipaceregs;
++struct avalanche_channel_int_number *avalanche_hw0_chregs; /* Channel control registers */
+
+/*
-+ * We have upto 8 empty zeroed pages so we can map one of the right colour
-+ * when needed. This is necessary only on R4000 / R4400 SC and MC versions
-+ * where we have to avoid VCED / VECI exceptions for good performance at
-+ * any price. Since page is never written to after the initialization we
-+ * don't have to care about aliases on other CPUs.
++ This remaps interrupts to exist on other channels than the default
++ channels. essentially we can use the line # as the index for this
++ array
+ */
+
-+static inline unsigned long setup_zero_pages(void)
-+{
-+ unsigned long order, size;
-+ struct page *page;
-+ if(current_cpu_data.options & MIPS_CPU_VCE)
-+ order = 3;
-+ else
-+ order = 0;
-+
-+ empty_zero_page = __get_free_pages(GFP_KERNEL, order);
-+
-+ if (!empty_zero_page)
-+ panic("Oh boy, that early out of memory?");
-+
-+ page = virt_to_page(empty_zero_page);
-+
-+ while (page < virt_to_page(empty_zero_page + (PAGE_SIZE << order))) {
-+ set_bit(PG_reserved, &page->flags);
-+ set_page_count(page, 0);
-+ page++;
-+ }
-+
-+ size = PAGE_SIZE << order;
-+ zero_page_mask = (size - 1) & PAGE_MASK;
-+ memset((void *)empty_zero_page, 0, size);
++static unsigned long line_to_channel[AVINTNUM(AVALANCHE_INT_END_PRIMARY)];
++unsigned long uni_secondary_interrupt = 0;
+
-+ return 1UL << order;
++static void end_avalanche_irq(unsigned int irq)
++{
++ if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
++ enable_avalanche_irq(irq);
+}
+
-+/*
-+ * paging_init() sets up the page tables
-+ *
-+ * This routines also unmaps the page at virtual kernel address 0, so
-+ * that we can trap those pesky NULL-reference errors in the kernel.
-+ */
-+void __init paging_init(void)
++void disable_avalanche_irq(unsigned int irq_nr)
+{
-+ unsigned long zones_size[MAX_NR_ZONES] = {0, 0, 0};
-+ unsigned long low, start_pfn;
++ unsigned long flags;
++ unsigned long chan_nr=0;
++
++ save_and_cli(flags);
++
++ /* irq_nr represents the line number for the interrupt. We must
++ * disable the channel number associated with that line number.
++ */
+
-+ /* Initialize the entire pgd. */
-+ pgd_init((unsigned long)swapper_pg_dir);
-+ pgd_init((unsigned long)swapper_pg_dir + PAGE_SIZE / 2);
++ if(irq_nr > AVALANCHE_INT_END_PRIMARY_REG2)
++ chan_nr = AVINTNUM(irq_nr); /*CHECK THIS ALSO*/
++ else
++ chan_nr = line_to_channel[AVINTNUM(irq_nr)];/* WE NEED A LINE TO CHANNEL MAPPING FUNCTION HERE*/
+
++ /* disable the interrupt channel bit */
+
-+ start_pfn = START_PFN;
-+ // max_dma = virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT;
-+ low = MAX_LOW_PFN;
++ /* primary interrupt #'s 0-31 */
+
-+ /* Avalanche DMA-able memory 0x14000000+memsize */
++ if(chan_nr <= AVINTNUM(AVALANCHE_INT_END_PRIMARY_REG1))
++ avalanche_hw0_icregs->intecr1 = (1 << chan_nr);
+
-+ zones_size[ZONE_DMA] = low - start_pfn;
++ /* primary interrupt #'s 32-39 */
+
-+ free_area_init_node(0, NODE_DATA(0), 0, zones_size, __MEMORY_START, 0);
++ else if ((chan_nr <= AVINTNUM(AVALANCHE_INT_END_PRIMARY_REG2)) &&
++ (chan_nr > AVINTNUM(AVALANCHE_INT_END_PRIMARY_REG1)))
++ avalanche_hw0_icregs->intecr2 = (1 << (chan_nr - AVINTNUM(AVALANCHE_INT_END_SECONDARY)));
+
-+#ifdef CONFIG_DISCONTIGMEM
-+ zones_size[ZONE_DMA] = __MEMORY_SIZE_2ND >> PAGE_SHIFT;
-+ zones_size[ZONE_NORMAL] = 0;
-+ free_area_init_node(1, NODE_DATA(1), 0, zones_size, __MEMORY_START_2ND, 0);
-+#endif /* CONFIG_DISCONTIGMEM */
++ else /* secondary interrupt #'s 0-31 */
++ avalanche_hw0_ecregs->exiecr = (1 << (chan_nr - AVINTNUM(AVALANCHE_INT_END_PRIMARY)));
+
++ restore_flags(flags);
+}
+
-+extern char _ftext, _etext, _fdata, _edata, _end;
-+extern char __init_begin, __init_end;
-+
-+void __init mem_init(void)
++void enable_avalanche_irq(unsigned int irq_nr)
+{
-+ int codesize, reservedpages, datasize, initsize;
-+ int tmp;
-+
-+ max_mapnr = num_physpages = MAX_LOW_PFN - START_PFN;
-+ high_memory = (void *)__va(MAX_LOW_PFN * PAGE_SIZE);
++ unsigned long flags;
++ unsigned long chan_nr=0;
+
-+ /* free up the memory associated with Adam2 -
-+ * that is the, after the first page that is
-+ * reserved all the way up to the start of the kernel
-+ */
-+ free_bootmem_node(NODE_DATA(0), (__MEMORY_START+PAGE_SIZE),
-+ (__pa(&_ftext))-(__MEMORY_START+PAGE_SIZE) );
++ save_and_cli(flags);
+
-+ /* this will put all low memory onto the freelists */
-+ totalram_pages += free_all_bootmem_node(NODE_DATA(0));
++ /* irq_nr represents the line number for the interrupt. We must
++ * disable the channel number associated with that line number.
++ */
+
-+ /* Setup zeroed pages */
-+ totalram_pages -= setup_zero_pages();
++ if(irq_nr > AVALANCHE_INT_END_PRIMARY_REG2)
++ chan_nr = AVINTNUM(irq_nr);
++ else
++ chan_nr = line_to_channel[AVINTNUM(irq_nr)];
+
++ /* enable the interrupt channel bit */
+
-+#ifdef CONFIG_DISCONTIGMEM
-+ totalram_pages += free_all_bootmem_node(NODE_DATA(1));
-+#endif
-+ reservedpages = 0;
-+ for (tmp = 0; tmp < num_physpages; tmp++)
-+ /*
-+ * Only count reserved RAM pages
-+ */
-+ if (PageReserved(mem_map+tmp))
-+ reservedpages++;
++ /* primary interrupt #'s 0-31 */
++ if(chan_nr <= AVINTNUM(AVALANCHE_INT_END_PRIMARY_REG1))
++ avalanche_hw0_icregs->intesr1 = (1 << chan_nr);
+
-+ codesize = (unsigned long) &_etext - (unsigned long) &_ftext;
-+ datasize = (unsigned long) &_edata - (unsigned long) &_fdata;
-+ initsize = (unsigned long) &__init_end - (unsigned long) &__init_begin;
++ /* primary interrupt #'s 32 throuth 39 */
++ else if ((chan_nr <= AVINTNUM(AVALANCHE_INT_END_PRIMARY_REG2)) &&
++ (chan_nr > AVINTNUM(AVALANCHE_INT_END_PRIMARY_REG1)))
++ avalanche_hw0_icregs->intesr2 = (1 << (chan_nr - AVINTNUM(AVALANCHE_INT_END_SECONDARY)));
+
-+ printk("Memory: %luk/%luk available (%dk kernel code, %dk reserved, %dk data, %dk init)\n",
-+ (unsigned long) nr_free_pages() << (PAGE_SHIFT-10),
-+ max_mapnr << (PAGE_SHIFT-10),
-+ codesize >> 10,
-+ reservedpages << (PAGE_SHIFT-10),
-+ datasize >> 10,
-+ initsize >> 10);
++ else /* secondary interrupt #'s 0-31 */
++ avalanche_hw0_ecregs->exiesr = (1 << (chan_nr - AVINTNUM(AVALANCHE_INT_END_PRIMARY)));
+
++ restore_flags(flags);
+}
+
-+/* fixes paging routines for avalanche (utilized in /arch/mips/kernel/setup.c) */
-+
-+void avalanche_bootmem_init(void)
++static unsigned int startup_avalanche_irq(unsigned int irq)
+{
-+ unsigned long start_pfn, max_pfn;
-+ unsigned long max_low_pfn;
-+ unsigned int memsize,memory_end,memory_start;
-+ char *memsize_str;
-+
-+ memsize_str = prom_getenv("memsize");
-+ if (!memsize_str) {
-+ memsize = 0x02000000;
-+ } else {
-+ memsize = simple_strtol(memsize_str, NULL, 0);
-+ }
++ enable_avalanche_irq(irq);
++ return 0; /* never anything pending */
++}
+
++void __init ar7_irq_init(int base)
++{
++ int i;
+
-+ memory_start = (unsigned long)PAGE_OFFSET+__MEMORY_START;
-+ memory_end = memory_start + memsize;
++ avalanche_hw0_icregs = (struct avalanche_ictrl_regs *)AVALANCHE_ICTRL_REGS_BASE;
++ avalanche_hw0_ecregs = (struct avalanche_exctrl_regs *)AVALANCHE_ECTRL_REGS_BASE;
++ avalanche_hw0_ipaceregs = (struct avalanche_ipace_regs *)AVALANCHE_IPACE_REGS_BASE;
++ avalanche_hw0_chregs = (struct avalanche_channel_int_number *)AVALANCHE_CHCTRL_REGS_BASE;
+
-+ /*
-+ * Find the highest memory page fram number we have available
++ /* Disable interrupts and clear pending
+ */
+
-+ max_pfn = PFN_DOWN(__pa(memory_end));
++ avalanche_hw0_icregs->intecr1 = 0xffffffff; /* disable interrupts 0:31 */
++ avalanche_hw0_icregs->intcr1 = 0xffffffff; /* clear interrupts 0:31 */
++ avalanche_hw0_icregs->intecr2 = 0xff; /* disable interrupts 32:39 */
++ avalanche_hw0_icregs->intcr2 = 0xff; /* clear interrupts 32:39 */
++ avalanche_hw0_ecregs->exiecr = 0xffffffff; /* disable secondary interrupts 0:31 */
++ avalanche_hw0_ecregs->excr = 0xffffffff; /* clear secondary interrupts 0:31 */
+
-+ /*
-+ * Determine the low and high memory ranges
-+ */
+
-+ max_low_pfn = max_pfn;
++ // avalanche_hw0_ipaceregs->ipacep = (2*get_avalanche_vbus_freq()/1000000)*4;
++ /* hack for speeding up the pacing. */
++ printk("the pacing pre-scalar has been set as 600.\n");
++ avalanche_hw0_ipaceregs->ipacep = 600;
++ /* Channel to line mapping, Line to Channel mapping */
+
-+ /*
-+ * Partially used pages are not usable - thus we are
-+ * rounding upwards:
-+ */
++ for(i = 0; i < 40; i++)
++ avalanche_int_set(i,i);
+
-+ start_pfn = PFN_UP(__pa(&_end));
++ ar7_irq_base = base;
++ for (i = base; i <= base+40; i++)
++ {
++ irq_desc[i].status = IRQ_DISABLED;
++ irq_desc[i].action = 0;
++ irq_desc[i].depth = 1;
++ irq_desc[i].handler = &avalanche_irq_type;
++ }
+
-+ /*
-+ * Find a proper area for the bootmem bitmap. After this
-+ * bootstrap step all allocations (until the page allocator is
-+ * intact) must be done via bootmem_alloc().
-+ */
++ setup_irq(2, &ar7_hw0_action);
++ set_c0_status(IE_IRQ0);
+
-+ bootmap_size = init_bootmem_node(NODE_DATA(0), start_pfn,
-+ __MEMORY_START>>PAGE_SHIFT, max_low_pfn);
++ return;
++}
+
++void ar7_hw0_interrupt(int interrupt, void *dev, struct pt_regs *regs)
++{
++ int irq;
++ unsigned long int_line_number, status;
++ int i, chan_nr = 0;
+
-+ /*
-+ * Register fully available low RAM pages with the bootmem allocator.
-+ */
++ int_line_number = ((avalanche_hw0_icregs->pintir >> 16) & 0x3F);
++ chan_nr = ((avalanche_hw0_icregs->pintir) & 0x3F);
+
++ if(chan_nr < 32) /* primary 0-31 */
+ {
-+ unsigned long curr_pfn, last_pfn, pages;
-+
-+ /*
-+ * We are rounding up the start address of usable memory:
-+ */
-+ curr_pfn = PFN_UP(__MEMORY_START);
-+
-+ /*
-+ * ... and at the end of the usable range downwards:
-+ */
-+ last_pfn = PFN_DOWN(__pa(memory_end));
-+
-+ if (last_pfn > max_low_pfn)
-+ last_pfn = max_low_pfn;
-+
-+ pages = last_pfn - curr_pfn;
++ if( chan_nr != uni_secondary_interrupt)
++ avalanche_hw0_icregs->intcr1 = (1<<chan_nr);
+
++ }
+
-+ free_bootmem_node(NODE_DATA(0), PFN_PHYS(curr_pfn),
-+ PFN_PHYS(pages));
++ if((chan_nr < 40) && (chan_nr > 31)) /* primary 32-39 */
++ {
++ avalanche_hw0_icregs->intcr2 = (1<<(chan_nr-32));
+ }
+
-+ /*
-+ * Reserve the kernel text and
-+ * Reserve the bootmem bitmap. We do this in two steps (first step
-+ * was init_bootmem()), because this catches the (definitely buggy)
-+ * case of us accidentally initializing the bootmem allocator with
-+ * an invalid RAM area.
-+ */
-+ reserve_bootmem_node(NODE_DATA(0), __MEMORY_START+PAGE_SIZE,
-+ (PFN_PHYS(start_pfn)+bootmap_size+PAGE_SIZE-1)-__MEMORY_START);
+
-+ /*
-+ * reserve physical page 0 - it's a special BIOS page on many boxes,
-+ * enabling clean reboots, SMP operation, laptop functions.
++ /* If the Priority Interrupt Index Register returns 40 then no
++ * interrupts are pending
+ */
-+ reserve_bootmem_node(NODE_DATA(0), __MEMORY_START, PAGE_SIZE);
-+}
+
-+extern char __init_begin, __init_end;
++ if(chan_nr == 40)
++ return;
+
-+void free_initmem(void)
-+{
-+ unsigned long addr;
-+ // prom_free_prom_memory ();
++ if(chan_nr == uni_secondary_interrupt) /* secondary 0-31 */
++ {
++ status = avalanche_hw0_ecregs->exsr;
++ for(i=0; i < 32; i++)
++ {
++ if (status & 1<<i)
++ {
++ /* clear secondary interrupt */
++ avalanche_hw0_ecregs->excr = 1 << i;
++ break;
++ }
++ }
++ irq = i+40;
+
-+ addr = (unsigned long) &__init_begin;
-+ while (addr < (unsigned long) &__init_end) {
-+ ClearPageReserved(virt_to_page(addr));
-+ set_page_count(virt_to_page(addr), 1);
-+ free_page(addr);
-+ totalram_pages++;
-+ addr += PAGE_SIZE;
-+ }
-+ printk("Freeing unused kernel memory: %dk freed\n",
-+ (&__init_end - &__init_begin) >> 10);
-+}
++ /* clear the universal secondary interrupt */
++ avalanche_hw0_icregs->intcr1 = 1 << uni_secondary_interrupt;
+
-+void si_meminfo(struct sysinfo *val)
-+{
-+ val->totalram = totalram_pages;
-+ val->sharedram = 0;
-+ val->freeram = nr_free_pages();
-+ val->bufferram = atomic_read(&buffermem_pages);
-+ val->totalhigh = 0;
-+ val->freehigh = nr_free_highpages();
-+ val->mem_unit = PAGE_SIZE;
++ }
++ else
++ irq = chan_nr;
+
++ do_IRQ(irq + ar7_irq_base, regs);
+ return;
+}
-diff -urN linux.old/arch/mips/ar7/cmdline.c linux.dev/arch/mips/ar7/cmdline.c
---- linux.old/arch/mips/ar7/cmdline.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/ar7/cmdline.c 2005-07-12 02:59:26.169672024 +0200
-@@ -0,0 +1,64 @@
-+/*
-+ * Carsten Langgaard, carstenl@mips.com
-+ * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
-+ *
-+ * This program is free software; you can distribute it and/or modify it
-+ * under the terms of the GNU General Public License (Version 2) as
-+ * published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope it will be useful, but WITHOUT
-+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-+ * for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License along
-+ * with this program; if not, write to the Free Software Foundation, Inc.,
-+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-+ *
-+ * Kernel command line creation using the prom monitor (YAMON) argc/argv.
-+ */
-+#include <linux/init.h>
-+#include <linux/string.h>
-+
-+#include <asm/bootinfo.h>
-+
-+extern int prom_argc;
-+extern int *_prom_argv;
-+
-+/*
-+ * YAMON (32-bit PROM) pass arguments and environment as 32-bit pointer.
-+ * This macro take care of sign extension.
-+ */
-+#define prom_argv(index) ((char *)(((int *)(int)_prom_argv)[(index)]))
-+
-+char arcs_cmdline[CL_SIZE];
-+
-+char * __init prom_getcmdline(void)
-+{
-+ return &(arcs_cmdline[0]);
-+}
-+
+
-+void __init prom_init_cmdline(void)
++void avalanche_int_set(int channel, int line)
+{
-+ char *cp;
-+ int actr;
-+
-+ actr = 1; /* Always ignore argv[0] */
-+
-+ cp = &(arcs_cmdline[0]);
-+#ifdef CONFIG_CMDLINE_BOOL
-+ strcpy(cp, CONFIG_CMDLINE);
-+ cp += strlen(CONFIG_CMDLINE);
-+ *cp++ = ' ';
-+#endif
-+ while(actr < prom_argc) {
-+ strcpy(cp, prom_argv(actr));
-+ cp += strlen(prom_argv(actr));
-+ *cp++ = ' ';
-+ actr++;
-+ }
-+ if (cp != &(arcs_cmdline[0])) /* get rid of trailing space */
-+ --cp;
-+ *cp = '\0';
-+}
-diff -urN linux.old/arch/mips/ar7/init.c linux.dev/arch/mips/ar7/init.c
---- linux.old/arch/mips/ar7/init.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/ar7/init.c 2005-07-12 02:59:26.169672024 +0200
-@@ -0,0 +1,144 @@
-+/*
-+ * Carsten Langgaard, carstenl@mips.com
++ switch(channel)
++ {
++ case(0):
++ avalanche_hw0_chregs->cintnr0 = line;
++ break;
++ case(1):
++ avalanche_hw0_chregs->cintnr1 = line;
++ break;
++ case(2):
++ avalanche_hw0_chregs->cintnr2 = line;
++ break;
++ case(3):
++ avalanche_hw0_chregs->cintnr3 = line;
++ break;
++ case(4):
++ avalanche_hw0_chregs->cintnr4 = line;
++ break;
++ case(5):
++ avalanche_hw0_chregs->cintnr5 = line;
++ break;
++ case(6):
++ avalanche_hw0_chregs->cintnr6 = line;
++ break;
++ case(7):
++ avalanche_hw0_chregs->cintnr7 = line;
++ break;
++ case(8):
++ avalanche_hw0_chregs->cintnr8 = line;
++ break;
++ case(9):
++ avalanche_hw0_chregs->cintnr9 = line;
++ break;
++ case(10):
++ avalanche_hw0_chregs->cintnr10 = line;
++ break;
++ case(11):
++ avalanche_hw0_chregs->cintnr11 = line;
++ break;
++ case(12):
++ avalanche_hw0_chregs->cintnr12 = line;
++ break;
++ case(13):
++ avalanche_hw0_chregs->cintnr13 = line;
++ break;
++ case(14):
++ avalanche_hw0_chregs->cintnr14 = line;
++ break;
++ case(15):
++ avalanche_hw0_chregs->cintnr15 = line;
++ break;
++ case(16):
++ avalanche_hw0_chregs->cintnr16 = line;
++ break;
++ case(17):
++ avalanche_hw0_chregs->cintnr17 = line;
++ break;
++ case(18):
++ avalanche_hw0_chregs->cintnr18 = line;
++ break;
++ case(19):
++ avalanche_hw0_chregs->cintnr19 = line;
++ break;
++ case(20):
++ avalanche_hw0_chregs->cintnr20 = line;
++ break;
++ case(21):
++ avalanche_hw0_chregs->cintnr21 = line;
++ break;
++ case(22):
++ avalanche_hw0_chregs->cintnr22 = line;
++ break;
++ case(23):
++ avalanche_hw0_chregs->cintnr23 = line;
++ break;
++ case(24):
++ avalanche_hw0_chregs->cintnr24 = line;
++ break;
++ case(25):
++ avalanche_hw0_chregs->cintnr25 = line;
++ break;
++ case(26):
++ avalanche_hw0_chregs->cintnr26 = line;
++ break;
++ case(27):
++ avalanche_hw0_chregs->cintnr27 = line;
++ break;
++ case(28):
++ avalanche_hw0_chregs->cintnr28 = line;
++ break;
++ case(29):
++ avalanche_hw0_chregs->cintnr29 = line;
++ break;
++ case(30):
++ avalanche_hw0_chregs->cintnr30 = line;
++ break;
++ case(31):
++ avalanche_hw0_chregs->cintnr31 = line;
++ break;
++ case(32):
++ avalanche_hw0_chregs->cintnr32 = line;
++ break;
++ case(33):
++ avalanche_hw0_chregs->cintnr33 = line;
++ break;
++ case(34):
++ avalanche_hw0_chregs->cintnr34 = line;
++ break;
++ case(35):
++ avalanche_hw0_chregs->cintnr35 = line;
++ break;
++ case(36):
++ avalanche_hw0_chregs->cintnr36 = line;
++ break;
++ case(37):
++ avalanche_hw0_chregs->cintnr37 = line;
++ break;
++ case(38):
++ avalanche_hw0_chregs->cintnr38 = line;
++ break;
++ case(39):
++ avalanche_hw0_chregs->cintnr39 = line;
++ break;
++ default:
++ printk("Error: Unknown Avalanche interrupt channel\n");
++ }
++
++ line_to_channel[line] = channel; /* Suraj check */
++
++ if (channel == UNIFIED_SECONDARY_INTERRUPT)
++ uni_secondary_interrupt = line;
++
++}
++
++
++#define AVALANCHE_MAX_PACING_BLK 3
++#define AVALANCHE_PACING_LOW_VAL 2
++#define AVALANCHE_PACING_HIGH_VAL 63
++
++int avalanche_request_pacing(int irq_nr, unsigned int blk_num,
++ unsigned int pace_value)
++{
++ unsigned int blk_offset;
++ unsigned long flags;
++
++ if(irq_nr < MIPS_EXCEPTION_OFFSET &&
++ irq_nr >= AVALANCHE_INT_END_PRIMARY)
++ return (0);
++
++ if(blk_num > AVALANCHE_MAX_PACING_BLK)
++ return(-1);
++
++ if(pace_value > AVALANCHE_PACING_HIGH_VAL &&
++ pace_value < AVALANCHE_PACING_LOW_VAL)
++ return(-1);
++
++ blk_offset = blk_num*8;
++
++ save_and_cli(flags);
++
++ /* disable the interrupt pacing, if enabled previously */
++ avalanche_hw0_ipaceregs->ipacemax &= ~(0xff << blk_offset);
++
++ /* clear the pacing map */
++ avalanche_hw0_ipaceregs->ipacemap &= ~(0xff << blk_offset);
++
++ /* setup the new values */
++ avalanche_hw0_ipaceregs->ipacemap |= ((AVINTNUM(irq_nr)) << blk_offset);
++ avalanche_hw0_ipaceregs->ipacemax |= ((0x80 | pace_value) << blk_offset);
++
++ restore_flags(flags);
++
++ return(0);
++}
+diff -urN linux.old/arch/mips/ar7/memory.c linux.dev/arch/mips/ar7/memory.c
+--- linux.old/arch/mips/ar7/memory.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/ar7/memory.c 2005-11-10 01:14:16.372731750 +0100
+@@ -0,0 +1,103 @@
++/*
++ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
+ *
++ * ########################################################################
++ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
-+ * PROM library initialisation code.
++ * ########################################################################
++ *
+ */
++
+#include <linux/config.h>
+#include <linux/init.h>
-+#include <linux/string.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
++#include <linux/mm.h>
++#include <linux/bootmem.h>
+
-+#include <asm/io.h>
++#include <asm/bootinfo.h>
++#include <asm/page.h>
+#include <asm/mips-boards/prom.h>
-+#include <asm/mips-boards/generic.h>
+
-+/* Environment variable */
-+typedef struct {
-+ char *name;
-+ char *val;
-+} t_env_var;
-+
-+int prom_argc;
-+int *_prom_argv, *_prom_envp;
++extern char _ftext;
++extern int preserve_adam2;
+
-+/* max # of Adam2 environment variables */
-+#define MAX_ENV_ENTRY 80
-+
-+static t_env_var local_envp[MAX_ENV_ENTRY];
-+int init_debug = 0;
-+
-+char *prom_getenv(char *envname)
++void __init prom_meminit(void)
+{
-+ /*
-+ * Return a pointer to the given environment variable.
-+ * In 64-bit mode: we're using 64-bit pointers, but all pointers
-+ * in the PROM structures are only 32-bit, so we need some
-+ * workarounds, if we are running in 64-bit mode.
-+ */
-+ int i, index=0;
-+ t_env_var *env = (t_env_var *) local_envp;
++ char *memsize_str;
++ unsigned long memsize, adam2size;
+
-+ i = strlen(envname);
-+ while (env->name) {
-+ if(strncmp(envname, env->name, i) == 0) {
-+ return(env->val);
-+ }
-+ env++;
-+ }
++ /* assume block before kernel is used by bootloader */
++ adam2size = __pa(&_ftext) - PHYS_OFFSET;
+
-+ return NULL;
-+}
++ memsize_str = prom_getenv("memsize");
++ if (!memsize_str) {
++ memsize = 0x02000000;
++ } else {
++ memsize = simple_strtol(memsize_str, NULL, 0);
++ }
+
-+static inline unsigned char str2hexnum(unsigned char c)
-+{
-+ if (c >= '0' && c <= '9')
-+ return c - '0';
-+ if (c >= 'a' && c <= 'f')
-+ return c - 'a' + 10;
-+ return 0; /* foo */
++#if 0
++ add_memory_region(0x00000000, PHYS_OFFSET, BOOT_MEM_RESERVED);
++#endif
++ add_memory_region(PHYS_OFFSET, adam2size, BOOT_MEM_ROM_DATA);
++ add_memory_region(PHYS_OFFSET+adam2size, memsize-adam2size,
++ BOOT_MEM_RAM);
+}
+
-+static inline void str2eaddr(unsigned char *ea, unsigned char *str)
++unsigned long __init prom_free_prom_memory (void)
+{
+ int i;
++ unsigned long freed = 0;
++ unsigned long addr;
+
-+ for (i = 0; i < 6; i++) {
-+ unsigned char num;
++ if (preserve_adam2) {
++ char *firstfree_str = prom_getenv("firstfreeaddress");
++ unsigned long firstfree = 0;
+
-+ if((*str == '.') || (*str == ':'))
-+ str++;
-+ num = str2hexnum(*str++) << 4;
-+ num |= (str2hexnum(*str++));
-+ ea[i] = num;
++ if (firstfree_str)
++ firstfree = simple_strtol(firstfree_str, NULL, 0);
++
++ if (firstfree && firstfree < (unsigned long)&_ftext) {
++ printk("Preserving ADAM2 memory.\n");
++ } else if (firstfree) {
++ printk("Can't preserve ADAM2 memory, "
++ "firstfreeaddress = %08lx.\n", firstfree);
++ preserve_adam2 = 0;
++ } else {
++ printk("Can't preserve ADAM2 memory, "
++ "firstfreeaddress unknown!\n");
++ preserve_adam2 = 0;
++ }
+ }
-+}
+
-+int get_ethernet_addr(char *ethernet_addr)
-+{
-+ char *ethaddr_str;
++ if (!preserve_adam2) {
++ for (i = 0; i < boot_mem_map.nr_map; i++) {
++ if (boot_mem_map.map[i].type != BOOT_MEM_ROM_DATA)
++ continue;
+
-+ ethaddr_str = prom_getenv("ethaddr");
-+ if (!ethaddr_str) {
-+ printk("ethaddr not set in boot prom\n");
-+ return -1;
-+ }
-+ str2eaddr(ethernet_addr, ethaddr_str);
-+
-+ if (init_debug > 1) {
-+ int i;
-+ printk("get_ethernet_addr: ");
-+ for (i=0; i<5; i++)
-+ printk("%02x:", (unsigned char)*(ethernet_addr+i));
-+ printk("%02x\n", *(ethernet_addr+i));
++ addr = boot_mem_map.map[i].addr;
++ while (addr < boot_mem_map.map[i].addr
++ + boot_mem_map.map[i].size) {
++ ClearPageReserved(virt_to_page(__va(addr)));
++ set_page_count(virt_to_page(__va(addr)), 1);
++ free_page((unsigned long)__va(addr));
++ addr += PAGE_SIZE;
++ freed += PAGE_SIZE;
++ }
++ }
++ printk("Freeing prom memory: %ldkb freed\n", freed >> 10);
+ }
-+
-+ return 0;
++ return freed >> PAGE_SHIFT;
+}
+diff -urN linux.old/arch/mips/ar7/misc.c linux.dev/arch/mips/ar7/misc.c
+--- linux.old/arch/mips/ar7/misc.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/ar7/misc.c 2005-11-10 01:12:43.946955500 +0100
+@@ -0,0 +1,322 @@
++#include <asm/ar7/sangam.h>
++#include <asm/ar7/avalanche_misc.h>
++#include <linux/module.h>
++#include <linux/spinlock.h>
+
-+int __init prom_init(int argc, char **argv, char **envp)
-+{
-+ int i;
-+ t_env_var *env = (t_env_var *) envp;
-+
-+ prom_argc = argc;
-+ _prom_argv = (int *)argv;
-+ _prom_envp = (int *)envp;
++#define TRUE 1
+
-+ /* Copy what we need locally so we are not dependent on
-+ * bootloader RAM. In Adam2, the environment parameters
-+ * are in flash but the table that references them is in
-+ * RAM
-+ */
-+ for(i=0; i < MAX_ENV_ENTRY; i++, env++) {
-+ if (env->name) {
-+ local_envp[i].name = env->name;
-+ local_envp[i].val = env->val;
-+ } else {
-+ local_envp[i].name = NULL;
-+ local_envp[i].val = NULL;
-+ }
-+ }
++static unsigned int avalanche_vbus_freq;
+
-+ set_io_port_base(0);
++REMOTE_VLYNQ_DEV_RESET_CTRL_FN p_remote_vlynq_dev_reset_ctrl = NULL;
+
-+ prom_printf("\nLINUX started...\n");
-+ prom_init_cmdline();
-+ prom_meminit();
++/*****************************************************************************
++ * Reset Control Module.
++ *****************************************************************************/
++void avalanche_reset_ctrl(unsigned int module_reset_bit,
++ AVALANCHE_RESET_CTRL_T reset_ctrl)
++{
++ volatile unsigned int *reset_reg = (unsigned int*) AVALANCHE_RST_CTRL_PRCR;
++
++ if(module_reset_bit >= 32 && module_reset_bit < 64)
++ return;
+
-+ return 0;
++ if(module_reset_bit >= 64)
++ {
++ if(p_remote_vlynq_dev_reset_ctrl) {
++ p_remote_vlynq_dev_reset_ctrl(module_reset_bit - 64, reset_ctrl);
++ return;
++ }
++ else
++ return;
++ }
++
++ if(reset_ctrl == OUT_OF_RESET)
++ *reset_reg |= 1 << module_reset_bit;
++ else
++ *reset_reg &= ~(1 << module_reset_bit);
++ return;
+}
-diff -urN linux.old/arch/mips/ar7/irq.c linux.dev/arch/mips/ar7/irq.c
---- linux.old/arch/mips/ar7/irq.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/ar7/irq.c 2005-07-12 02:59:26.190668832 +0200
-@@ -0,0 +1,705 @@
-+/*
-+ * Nitin Dhingra, iamnd@ti.com
-+ * Copyright (C) 2002 Texas Instruments, Inc. All rights reserved.
-+ *
-+ * ########################################################################
-+ *
-+ * This program is free software; you can distribute it and/or modify it
-+ * under the terms of the GNU General Public License (Version 2) as
-+ * published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope it will be useful, but WITHOUT
-+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-+ * for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License along
-+ * with this program; if not, write to the Free Software Foundation, Inc.,
-+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-+ *
-+ * ########################################################################
-+ *
-+ * Routines for generic manipulation of the interrupts found on the Texas
-+ * Instruments avalanche board
-+ *
-+ */
-+
-+#include <linux/config.h>
-+#include <linux/init.h>
-+#include <linux/sched.h>
-+#include <linux/slab.h>
-+#include <linux/interrupt.h>
-+#include <linux/kernel_stat.h>
-+#include <linux/proc_fs.h>
-+#include <asm/irq.h>
-+#include <asm/mips-boards/prom.h>
-+#include <asm/ar7/ar7.h>
-+#include <asm/ar7/avalanche_intc.h>
-+#include <asm/gdb-stub.h>
-+
+
-+#define shutdown_avalanche_irq disable_avalanche_irq
-+#define mask_and_ack_avalanche_irq disable_avalanche_irq
++AVALANCHE_RESET_CTRL_T avalanche_get_reset_status(unsigned int module_reset_bit)
++{
++ volatile unsigned int *reset_reg = (unsigned int*) AVALANCHE_RST_CTRL_PRCR;
+
-+static unsigned int startup_avalanche_irq(unsigned int irq);
-+static void end_avalanche_irq(unsigned int irq);
-+void enable_avalanche_irq(unsigned int irq_nr);
-+void disable_avalanche_irq(unsigned int irq_nr);
++ return (((*reset_reg) & (1 << module_reset_bit)) ? OUT_OF_RESET : IN_RESET );
++}
+
-+static struct hw_interrupt_type avalanche_irq_type = {
-+ "TI AVALANCHE",
-+ startup_avalanche_irq,
-+ shutdown_avalanche_irq,
-+ enable_avalanche_irq,
-+ disable_avalanche_irq,
-+ mask_and_ack_avalanche_irq,
-+ end_avalanche_irq,
-+ NULL
-+};
++void avalanche_sys_reset(AVALANCHE_SYS_RST_MODE_T mode)
++{
++ volatile unsigned int *sw_reset_reg = (unsigned int*) AVALANCHE_RST_CTRL_SWRCR;
++ *sw_reset_reg = mode;
++}
+
-+irq_desc_t irq_desc_ti[AVALANCHE_INT_END+1] __cacheline_aligned =
-+{ [0 ... AVALANCHE_INT_END] = { 0, &avalanche_irq_type, NULL, 0, SPIN_LOCK_UNLOCKED}};
++#define AVALANCHE_RST_CTRL_RSR_MASK 0x3
+
++AVALANCHE_SYS_RESET_STATUS_T avalanche_get_sys_last_reset_status()
++{
++ volatile unsigned int *sys_reset_status = (unsigned int*) AVALANCHE_RST_CTRL_RSR;
+
-+unsigned long spurious_count = 0;
++ return ( (AVALANCHE_SYS_RESET_STATUS_T) (*sys_reset_status & AVALANCHE_RST_CTRL_RSR_MASK) );
++}
+
-+struct avalanche_ictrl_regs *avalanche_hw0_icregs; /* Interrupt control regs (primary) */
-+struct avalanche_exctrl_regs *avalanche_hw0_ecregs; /* Exception control regs (secondary) */
-+struct avalanche_ipace_regs *avalanche_hw0_ipaceregs;
-+struct avalanche_channel_int_number *avalanche_hw0_chregs; /* Channel control registers */
+
-+extern asmlinkage void mipsIRQ(void);
++/*****************************************************************************
++ * Power Control Module
++ *****************************************************************************/
++#define AVALANCHE_GLOBAL_POWER_DOWN_MASK 0x3FFFFFFF /* bit 31, 30 masked */
++#define AVALANCHE_GLOBAL_POWER_DOWN_BIT 30 /* shift to bit 30, 31 */
+
+
-+/*
-+ * The avalanche/MIPS interrupt line numbers are used to represent the
-+ * interrupts within the irqaction arrays. The index notation is
-+ * is as follows:
-+ *
-+ * 0-7 MIPS CPU Exceptions (HW/SW)
-+ * 8-47 Primary Interrupts (Avalanche)
-+ * 48-79 Secondary Interrupts (Avalanche)
-+ *
-+ */
++void avalanche_power_ctrl(unsigned int module_power_bit, AVALANCHE_POWER_CTRL_T power_ctrl)
++{
++ volatile unsigned int *power_reg = (unsigned int*)AVALANCHE_POWER_CTRL_PDCR;
+
++ if (power_ctrl == POWER_CTRL_POWER_DOWN)
++ /* power down the module */
++ *power_reg |= (1 << module_power_bit);
++ else
++ /* power on the module */
++ *power_reg &= (~(1 << module_power_bit));
++}
+
-+static struct irqaction *hw0_irq_action_primary[AVINTNUM(AVALANCHE_INT_END_PRIMARY)] =
++AVALANCHE_POWER_CTRL_T avalanche_get_power_status(unsigned int module_power_bit)
+{
-+ NULL, NULL, NULL, NULL,
-+ NULL, NULL, NULL, NULL,
-+ NULL, NULL, NULL, NULL,
-+ NULL, NULL, NULL, NULL,
-+ NULL, NULL, NULL, NULL,
-+ NULL, NULL, NULL, NULL,
-+ NULL, NULL, NULL, NULL,
-+ NULL, NULL, NULL, NULL,
-+ NULL, NULL, NULL, NULL,
-+ NULL, NULL, NULL, NULL
-+};
++ volatile unsigned int *power_status_reg = (unsigned int*)AVALANCHE_POWER_CTRL_PDCR;
+
-+static struct irqaction *hw0_irq_action_secondary[AVINTNUM(AVALANCHE_INT_END_SECONDARY)] =
-+{
-+ NULL, NULL, NULL, NULL,
-+ NULL, NULL, NULL, NULL,
-+ NULL, NULL, NULL, NULL,
-+ NULL, NULL, NULL, NULL,
-+ NULL, NULL, NULL, NULL,
-+ NULL, NULL, NULL, NULL,
-+ NULL, NULL, NULL, NULL,
-+ NULL, NULL, NULL, NULL
-+};
++ return (((*power_status_reg) & (1 << module_power_bit)) ? POWER_CTRL_POWER_DOWN : POWER_CTRL_POWER_UP);
++}
+
-+/*
-+ This remaps interrupts to exist on other channels than the default
-+ channels. essentially we can use the line # as the index for this
-+ array
-+ */
++void avalanche_set_global_power_mode(AVALANCHE_SYS_POWER_MODE_T power_mode)
++{
++ volatile unsigned int *power_status_reg = (unsigned int*)AVALANCHE_POWER_CTRL_PDCR;
+
++ *power_status_reg &= AVALANCHE_GLOBAL_POWER_DOWN_MASK;
++ *power_status_reg |= ( power_mode << AVALANCHE_GLOBAL_POWER_DOWN_BIT);
++}
+
-+static unsigned long line_to_channel[AVINTNUM(AVALANCHE_INT_END_PRIMARY)];
-+unsigned long uni_secondary_interrupt = 0;
++AVALANCHE_SYS_POWER_MODE_T avalanche_get_global_power_mode(void)
++{
++ volatile unsigned int *power_status_reg = (unsigned int*)AVALANCHE_POWER_CTRL_PDCR;
+
-+static struct irqaction r4ktimer_action = {
-+ NULL, 0, 0, "R4000 timer/counter", NULL, NULL,
-+};
++ return((AVALANCHE_SYS_POWER_MODE_T) (((*power_status_reg) & (~AVALANCHE_GLOBAL_POWER_DOWN_MASK))
++ >> AVALANCHE_GLOBAL_POWER_DOWN_BIT));
++}
+
-+static struct irqaction *irq_action[8] = {
-+ NULL, /* SW int 0 */
-+ NULL, /* SW int 1 */
-+ NULL, /* HW int 0 */
-+ NULL,
-+ NULL,
-+ NULL, /* HW int 3 */
-+ NULL, /* HW int 4 */
-+ &r4ktimer_action /* HW int 5 */
-+};
++/*****************************************************************************
++ * GPIO Control
++ *****************************************************************************/
+
-+static void end_avalanche_irq(unsigned int irq)
++/****************************************************************************
++ * FUNCTION: avalanche_gpio_init
++ ***************************************************************************/
++void avalanche_gpio_init(void)
+{
-+ if (!(irq_desc_ti[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
-+ enable_avalanche_irq(irq);
++ spinlock_t closeLock;
++ unsigned int closeFlag;
++ volatile unsigned int *reset_reg = (unsigned int*) AVALANCHE_RST_CTRL_PRCR;
++ spin_lock_irqsave(&closeLock, closeFlag);
++ *reset_reg |= (1 << AVALANCHE_GPIO_RESET_BIT);
++ spin_unlock_irqrestore(&closeLock, closeFlag);
+}
+
-+void disable_avalanche_irq(unsigned int irq_nr)
++/****************************************************************************
++ * FUNCTION: avalanche_gpio_ctrl
++ ***************************************************************************/
++int avalanche_gpio_ctrl(unsigned int gpio_pin,
++ AVALANCHE_GPIO_PIN_MODE_T pin_mode,
++ AVALANCHE_GPIO_PIN_DIRECTION_T pin_direction)
+{
-+ unsigned long flags;
-+ unsigned long chan_nr=0;
-+ unsigned long int_bit=0;
-+
-+ if(irq_nr >= AVALANCHE_INT_END)
-+ {
-+ printk("whee, invalid irq_nr %d\n", irq_nr);
-+ panic("IRQ, you lose...");
-+ }
-+
-+ save_and_cli(flags);
-+
-+
-+ if(irq_nr < MIPS_EXCEPTION_OFFSET)
-+ {
-+ /* disable mips exception */
-+
-+ int_bit = read_c0_status() & ~(1 << (8+irq_nr));
-+ change_c0_status(ST0_IM,int_bit);
-+ restore_flags(flags);
-+ return;
-+ }
++ spinlock_t closeLock;
++ unsigned int closeFlag;
++ volatile unsigned int *gpio_ctrl = (unsigned int*)AVALANCHE_GPIO_ENBL;
+
-+ /* irq_nr represents the line number for the interrupt. We must
-+ * disable the channel number associated with that line number.
-+ */
++ if(gpio_pin >= 32)
++ return(-1);
+
-+ if(irq_nr > AVALANCHE_INT_END_PRIMARY_REG2)
-+ chan_nr = AVINTNUM(irq_nr); /*CHECK THIS ALSO*/
-+ else
-+ chan_nr = line_to_channel[AVINTNUM(irq_nr)];/* WE NEED A LINE TO CHANNEL MAPPING FUNCTION HERE*/
++ spin_lock_irqsave(&closeLock, closeFlag);
+
-+ /* disable the interrupt channel bit */
++ if(pin_mode == GPIO_PIN)
++ {
++ *gpio_ctrl |= (1 << gpio_pin);
+
-+ /* primary interrupt #'s 0-31 */
++ gpio_ctrl = (unsigned int*)AVALANCHE_GPIO_DIR;
++
++ if(pin_direction == GPIO_INPUT_PIN)
++ *gpio_ctrl |= (1 << gpio_pin);
++ else
++ *gpio_ctrl &= ~(1 << gpio_pin);
++ }
++ else /* FUNCTIONAL PIN */
++ {
++ *gpio_ctrl &= ~(1 << gpio_pin);
++ }
++
++ spin_unlock_irqrestore(&closeLock, closeFlag);
+
-+ if(chan_nr <= AVINTNUM(AVALANCHE_INT_END_PRIMARY_REG1))
-+ avalanche_hw0_icregs->intecr1 = (1 << chan_nr);
++ return (0);
++}
+
-+ /* primary interrupt #'s 32-39 */
++/****************************************************************************
++ * FUNCTION: avalanche_gpio_out
++ ***************************************************************************/
++int avalanche_gpio_out_bit(unsigned int gpio_pin, int value)
++{
++ spinlock_t closeLock;
++ unsigned int closeFlag;
++ volatile unsigned int *gpio_out = (unsigned int*) AVALANCHE_GPIO_DATA_OUT;
++
++ if(gpio_pin >= 32)
++ return(-1);
++
++ spin_lock_irqsave(&closeLock, closeFlag);
++ if(value == TRUE)
++ *gpio_out |= 1 << gpio_pin;
++ else
++ *gpio_out &= ~(1 << gpio_pin);
++ spin_unlock_irqrestore(&closeLock, closeFlag);
+
-+ else if ((chan_nr <= AVINTNUM(AVALANCHE_INT_END_PRIMARY_REG2)) &&
-+ (chan_nr > AVINTNUM(AVALANCHE_INT_END_PRIMARY_REG1)))
-+ avalanche_hw0_icregs->intecr2 = (1 << (chan_nr - AVINTNUM(AVALANCHE_INT_END_SECONDARY)));
++ return(0);
++}
+
-+ else /* secondary interrupt #'s 0-31 */
-+ avalanche_hw0_ecregs->exiecr = (1 << (chan_nr - AVINTNUM(AVALANCHE_INT_END_PRIMARY)));
++/****************************************************************************
++ * FUNCTION: avalanche_gpio_in
++ ***************************************************************************/
++int avalanche_gpio_in_bit(unsigned int gpio_pin)
++{
++ spinlock_t closeLock;
++ unsigned int closeFlag;
++ volatile unsigned int *gpio_in = (unsigned int*) AVALANCHE_GPIO_DATA_IN;
++ int ret_val = 0;
++
++ if(gpio_pin >= 32)
++ return(-1);
+
-+ restore_flags(flags);
++ spin_lock_irqsave(&closeLock, closeFlag);
++ ret_val = ((*gpio_in) & (1 << gpio_pin));
++ spin_unlock_irqrestore(&closeLock, closeFlag);
++
++ return (ret_val);
+}
+
-+void enable_avalanche_irq(unsigned int irq_nr)
++/****************************************************************************
++ * FUNCTION: avalanche_gpio_out_val
++ ***************************************************************************/
++int avalanche_gpio_out_value(unsigned int out_val, unsigned int out_mask,
++ unsigned int reg_index)
+{
-+ unsigned long flags;
-+ unsigned long chan_nr=0;
-+ unsigned long int_bit=0;
++ spinlock_t closeLock;
++ unsigned int closeFlag;
++ volatile unsigned int *gpio_out = (unsigned int*) AVALANCHE_GPIO_DATA_OUT;
+
-+ if(irq_nr > AVALANCHE_INT_END) {
-+ printk("whee, invalid irq_nr %d\n", irq_nr);
-+ panic("IRQ, you lose...");
-+ }
++ if(reg_index > 0)
++ return(-1);
+
-+ save_and_cli(flags);
++ spin_lock_irqsave(&closeLock, closeFlag);
++ *gpio_out &= ~out_mask;
++ *gpio_out |= out_val;
++ spin_unlock_irqrestore(&closeLock, closeFlag);
+
++ return(0);
++}
+
-+ if(irq_nr < MIPS_EXCEPTION_OFFSET)
-+ {
-+ /* Enable MIPS exceptions */
-+ int_bit = read_c0_status();
-+ change_c0_status(ST0_IM,int_bit | (1<<(8+irq_nr)));
-+ restore_flags(flags);
-+ return;
-+ }
++/****************************************************************************
++ * FUNCTION: avalanche_gpio_in_value
++ ***************************************************************************/
++int avalanche_gpio_in_value(unsigned int* in_val, unsigned int reg_index)
++{
++ spinlock_t closeLock;
++ unsigned int closeFlag;
++ volatile unsigned int *gpio_in = (unsigned int*) AVALANCHE_GPIO_DATA_IN;
++
++ if(reg_index > 0)
++ return(-1);
+
-+ /* irq_nr represents the line number for the interrupt. We must
-+ * disable the channel number associated with that line number.
-+ */
++ spin_lock_irqsave(&closeLock, closeFlag);
++ *in_val = *gpio_in;
++ spin_unlock_irqrestore(&closeLock, closeFlag);
+
-+ if(irq_nr > AVALANCHE_INT_END_PRIMARY_REG2)
-+ chan_nr = AVINTNUM(irq_nr);
-+ else
-+ chan_nr = line_to_channel[AVINTNUM(irq_nr)];
++ return (0);
++}
+
-+ /* enable the interrupt channel bit */
++/***********************************************************************
++ *
++ * Wakeup Control Module for TNETV1050 Communication Processor
++ *
++ ***********************************************************************/
+
-+ /* primary interrupt #'s 0-31 */
-+ if(chan_nr <= AVINTNUM(AVALANCHE_INT_END_PRIMARY_REG1))
-+ avalanche_hw0_icregs->intesr1 = (1 << chan_nr);
++#define AVALANCHE_WAKEUP_POLARITY_BIT 16
+
-+ /* primary interrupt #'s 32 throuth 39 */
-+ else if ((chan_nr <= AVINTNUM(AVALANCHE_INT_END_PRIMARY_REG2)) &&
-+ (chan_nr > AVINTNUM(AVALANCHE_INT_END_PRIMARY_REG1)))
-+ avalanche_hw0_icregs->intesr2 = (1 << (chan_nr - AVINTNUM(AVALANCHE_INT_END_SECONDARY)));
++void avalanche_wakeup_ctrl(AVALANCHE_WAKEUP_INTERRUPT_T wakeup_int,
++ AVALANCHE_WAKEUP_CTRL_T wakeup_ctrl,
++ AVALANCHE_WAKEUP_POLARITY_T wakeup_polarity)
++{
++ volatile unsigned int *wakeup_status_reg = (unsigned int*) AVALANCHE_WAKEUP_CTRL_WKCR;
+
-+ else /* secondary interrupt #'s 0-31 */
-+ avalanche_hw0_ecregs->exiesr = (1 << (chan_nr - AVINTNUM(AVALANCHE_INT_END_PRIMARY)));
++ /* enable/disable */
++ if (wakeup_ctrl == WAKEUP_ENABLED)
++ /* enable wakeup */
++ *wakeup_status_reg |= wakeup_int;
++ else
++ /* disable wakeup */
++ *wakeup_status_reg &= (~wakeup_int);
+
-+ restore_flags(flags);
++ /* set polarity */
++ if (wakeup_polarity == WAKEUP_ACTIVE_LOW)
++ *wakeup_status_reg |= (wakeup_int << AVALANCHE_WAKEUP_POLARITY_BIT);
++ else
++ *wakeup_status_reg &= ~(wakeup_int << AVALANCHE_WAKEUP_POLARITY_BIT);
+}
+
-+static unsigned int startup_avalanche_irq(unsigned int irq)
++void avalanche_set_vbus_freq(unsigned int new_vbus_freq)
+{
-+ enable_avalanche_irq(irq);
-+ return 0; /* never anything pending */
++ avalanche_vbus_freq = new_vbus_freq;
+}
+
++unsigned int avalanche_get_vbus_freq()
++{
++ return(avalanche_vbus_freq);
++}
+
-+int get_irq_list(char *buf)
++unsigned int avalanche_get_chip_version_info()
+{
-+ int i, len = 0;
-+ int num = 0;
-+ struct irqaction *action;
++ return(*(volatile unsigned int*)AVALANCHE_CVR);
++}
+
-+ for (i = 0; i < MIPS_EXCEPTION_OFFSET; i++, num++)
-+ {
-+ action = irq_action[i];
-+ if (!action)
-+ continue;
-+ len += sprintf(buf+len, "%2d: %8d %c %s",
-+ num, kstat.irqs[0][num],
-+ (action->flags & SA_INTERRUPT) ? '+' : ' ',
-+ action->name);
-+ for (action=action->next; action; action = action->next) {
-+ len += sprintf(buf+len, ",%s %s",
-+ (action->flags & SA_INTERRUPT) ? " +" : "",
-+ action->name);
-+ }
-+ len += sprintf(buf+len, " [MIPS interrupt]\n");
-+ }
++SET_MDIX_ON_CHIP_FN_T p_set_mdix_on_chip_fn = NULL;
+
++int avalanche_set_mdix_on_chip(unsigned int base_addr, unsigned int operation)
++{
++ if(p_set_mdix_on_chip_fn)
++ return (p_set_mdix_on_chip_fn(base_addr, operation));
++ else
++ return(-1);
++}
+
-+ for (i = 0; i < AVINTNUM(AVALANCHE_INT_END); i++,num++)
-+ {
-+ if(i < AVINTNUM(AVALANCHE_INT_END_PRIMARY))
-+ action = hw0_irq_action_primary[i];
-+ else
-+ action = hw0_irq_action_secondary[i-AVINTNUM(AVALANCHE_INT_END_PRIMARY)];
-+ if (!action)
-+ continue;
-+ len += sprintf(buf+len, "%2d: %8d %c %s",
-+ num, kstat.irqs[0][ LNXINTNUM(i) ],
-+ (action->flags & SA_INTERRUPT) ? '+' : ' ',
-+ action->name);
++unsigned int avalanche_is_mdix_on_chip(void)
++{
++ return(p_set_mdix_on_chip_fn ? 1:0);
++}
+
-+ for (action=action->next; action; action = action->next)
-+ {
-+ len += sprintf(buf+len, ",%s %s",
-+ (action->flags & SA_INTERRUPT) ? " +" : "",
-+ action->name);
-+ }
++EXPORT_SYMBOL(avalanche_reset_ctrl);
++EXPORT_SYMBOL(avalanche_get_reset_status);
++EXPORT_SYMBOL(avalanche_sys_reset);
++EXPORT_SYMBOL(avalanche_get_sys_last_reset_status);
++EXPORT_SYMBOL(avalanche_power_ctrl);
++EXPORT_SYMBOL(avalanche_get_power_status);
++EXPORT_SYMBOL(avalanche_set_global_power_mode);
++EXPORT_SYMBOL(avalanche_get_global_power_mode);
++EXPORT_SYMBOL(avalanche_set_mdix_on_chip);
++EXPORT_SYMBOL(avalanche_is_mdix_on_chip);
+
-+ if(i < AVINTNUM(AVALANCHE_INT_END_PRIMARY))
-+ len += sprintf(buf+len, " [hw0 (Avalanche Primary)]\n");
-+ else
-+ len += sprintf(buf+len, " [hw0 (Avalanche Secondary)]\n");
++EXPORT_SYMBOL(avalanche_gpio_init);
++EXPORT_SYMBOL(avalanche_gpio_ctrl);
++EXPORT_SYMBOL(avalanche_gpio_out_bit);
++EXPORT_SYMBOL(avalanche_gpio_in_bit);
++EXPORT_SYMBOL(avalanche_gpio_out_value);
++EXPORT_SYMBOL(avalanche_gpio_in_value);
+
-+ }
++EXPORT_SYMBOL(avalanche_set_vbus_freq);
++EXPORT_SYMBOL(avalanche_get_vbus_freq);
+
-+ return len;
-+}
++EXPORT_SYMBOL(avalanche_get_chip_version_info);
+
-+int request_irq(unsigned int irq,
-+ void (*handler)(int, void *, struct pt_regs *),
-+ unsigned long irqflags,
-+ const char * devname,
-+ void *dev_id)
-+{
-+ struct irqaction *action;
+diff -urN linux.old/arch/mips/ar7/platform.h linux.dev/arch/mips/ar7/platform.h
+--- linux.old/arch/mips/ar7/platform.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/ar7/platform.h 2005-11-10 01:10:45.799571750 +0100
+@@ -0,0 +1,65 @@
++#ifndef _PLATFORM_H_
++#define _PLATFORM_H_
+
-+ if (irq > AVALANCHE_INT_END)
-+ return -EINVAL;
-+ if (!handler)
-+ return -EINVAL;
++#include <linux/config.h>
+
-+ action = (struct irqaction *)kmalloc(sizeof(struct irqaction), GFP_KERNEL);
-+ if(!action)
-+ return -ENOMEM;
+
-+ action->handler = handler;
-+ action->flags = irqflags;
-+ action->mask = 0;
-+ action->name = devname;
-+ irq_desc_ti[irq].action = action;
-+ action->dev_id = dev_id;
++/* Important: The definition of ENV_SPACE_SIZE should match with that in
++ * PSPBoot. (/psp_boot/inc/psbl/env.h)
++ */
++#ifdef CONFIG_MIPS_AVALANCHE_TICFG
++#define ENV_SPACE_SIZE (10 * 1024)
++#endif
+
-+ action->next = 0;
++#ifdef CONFIG_MIPS_TNETV1050SDB
++#define TNETV1050SDB
++#define DUAL_FLASH
++#endif
+
-+ if(irq < MIPS_EXCEPTION_OFFSET)
-+ {
-+ irq_action[irq] = action;
-+ enable_avalanche_irq(irq);
-+ return 0;
-+ }
++#ifdef CONFIG_MIPS_AR7DB
++#define TNETD73XX_BOARD
++#define AR7DB
++#endif
+
-+ if(irq < AVALANCHE_INT_END_PRIMARY)
-+ hw0_irq_action_primary[line_to_channel[AVINTNUM(irq)]] = action;
-+ else
-+ hw0_irq_action_secondary[irq - AVALANCHE_INT_END_PRIMARY] = action;
++#ifdef CONFIG_MIPS_AR7RD
++#define TNETD73XX_BOARD
++#define AR7RD
++#endif
+
-+ enable_avalanche_irq(irq);
++#ifdef CONFIG_AR7WRD
++#define TNETD73XX_BOARD
++#define AR7WRD
++#endif
+
-+ return 0;
-+}
++#ifdef CONFIG_MIPS_AR7VWI
++#define TNETD73XX_BOARD
++#define AR7VWi
++#endif
+
-+void free_irq(unsigned int irq, void *dev_id)
-+{
-+ struct irqaction *action;
++/* Merging from the DEV_DSL-PSPL4.3.2.7_Patch release. */
++#ifdef CONFIG_MIPS_AR7VW
++#define TNETD73XX_BOARD
++#define AR7WRD
++#endif
+
-+ if (irq > AVALANCHE_INT_END) {
-+ printk("Trying to free IRQ%d\n",irq);
-+ return;
-+ }
++#ifdef CONFIG_MIPS_AR7WI
++#define TNETD73XX_BOARD
++#define AR7Wi
++#endif
+
-+ if(irq < MIPS_EXCEPTION_OFFSET)
-+ {
-+ action = irq_action[irq];
-+ irq_action[irq] = NULL;
-+ irq_desc_ti[irq].action = NULL;
-+ disable_avalanche_irq(irq);
-+ kfree(action);
-+ return;
-+ }
++#ifdef CONFIG_MIPS_AR7V
++#define TNETD73XX_BOARD
++#define AR7V
++#endif
+
-+ if(irq < AVALANCHE_INT_END_PRIMARY) {
-+ action = hw0_irq_action_primary[line_to_channel[AVINTNUM(irq)]];
-+ hw0_irq_action_primary[line_to_channel[AVINTNUM(irq)]] = NULL;
-+ irq_desc_ti[irq].action = NULL;
-+ }
-+ else {
-+ action = hw0_irq_action_secondary[irq - AVALANCHE_INT_END_PRIMARY];
-+ hw0_irq_action_secondary[irq - AVALANCHE_INT_END_PRIMARY] = NULL;
-+ irq_desc_ti[irq].action = NULL;
-+ }
++#ifdef CONFIG_MIPS_AR7V
++#define TNETD73XX_BOARD
++#define AR7V
++#endif
+
-+ disable_avalanche_irq(irq);
-+ kfree(action);
-+}
++#ifdef CONFIG_MIPS_WA1130
++#define AVALANCHE
++#define WLAN
++#endif
+
-+#ifdef CONFIG_KGDB
-+extern void breakpoint(void);
-+extern int remote_debug;
+#endif
+diff -urN linux.old/arch/mips/ar7/promlib.c linux.dev/arch/mips/ar7/promlib.c
+--- linux.old/arch/mips/ar7/promlib.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/ar7/promlib.c 2005-11-10 01:14:16.372731750 +0100
+@@ -0,0 +1,48 @@
++/*
++ * Carsten Langgaard, carstenl@mips.com
++ * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
++ *
++ * This program is free software; you can distribute it and/or modify it
++ * under the terms of the GNU General Public License (Version 2) as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ * for more details.
++ *
++ * You should have received a copy of the GNU General Public License along
++ * with this program; if not, write to the Free Software Foundation, Inc.,
++ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++ *
++ * Putting things on the screen/serial line using Adam2 facilities.
++ */
+
-+//void init_IRQ(void) __init;
-+void __init init_IRQ(void)
++#include <linux/types.h>
++#include <asm/addrspace.h>
++
++#define AVALANCHE_YAMON_FUNCTION_BASE (KSEG1ADDR(0x10000500))
++#define AVALANCHE_YAMON_PROM_PRINT_COUNT_ADDR \
++ (AVALANCHE_YAMON_FUNCTION_BASE + 1 * 0x4)
++#define AVALANCHE_YAMON_PROM_EXIT \
++ (AVALANCHE_YAMON_FUNCTION_BASE + 8 * 0x4)
++
++void prom_putchar(char c)
+{
-+ int i;
++ static char buf[1];
++ void (*prom_print_str)(unsigned int dummy, char *s, int len) =
++ (void *)(*(uint32_t *)AVALANCHE_YAMON_PROM_PRINT_COUNT_ADDR);
+
-+ avalanche_hw0_icregs = (struct avalanche_ictrl_regs *)AVALANCHE_ICTRL_REGS_BASE;
-+ avalanche_hw0_ecregs = (struct avalanche_exctrl_regs *)AVALANCHE_ECTRL_REGS_BASE;
-+ avalanche_hw0_ipaceregs = (struct avalanche_ipace_regs *)AVALANCHE_IPACE_REGS_BASE;
-+ avalanche_hw0_chregs = (struct avalanche_channel_int_number *)AVALANCHE_CHCTRL_REGS_BASE;
++ buf[0] = c;
++ prom_print_str(1, buf, 1);
++ return;
++}
+
-+ /* Disable interrupts and clear pending
-+ */
-+
-+ avalanche_hw0_icregs->intecr1 = 0xffffffff; /* disable interrupts 0:31 */
-+ avalanche_hw0_icregs->intcr1 = 0xffffffff; /* clear interrupts 0:31 */
-+ avalanche_hw0_icregs->intecr2 = 0xff; /* disable interrupts 32:39 */
-+ avalanche_hw0_icregs->intcr2 = 0xff; /* clear interrupts 32:39 */
-+ avalanche_hw0_ecregs->exiecr = 0xffffffff; /* disable secondary interrupts 0:31 */
-+ avalanche_hw0_ecregs->excr = 0xffffffff; /* clear secondary interrupts 0:31 */
++void adam2_exit(int retval)
++{
++ void (*yamon_exit)(int retval) =
++ (void *)(*(uint32_t *)AVALANCHE_YAMON_PROM_EXIT);
+
++ yamon_exit(retval);
++ return;
++}
+diff -urN linux.old/arch/mips/ar7/psp_env.c linux.dev/arch/mips/ar7/psp_env.c
+--- linux.old/arch/mips/ar7/psp_env.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/ar7/psp_env.c 2005-11-10 01:10:45.799571750 +0100
+@@ -0,0 +1,350 @@
++#include <linux/config.h>
++#include <linux/init.h>
++#include <linux/string.h>
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <asm/io.h>
+
-+ /* Channel to line mapping, Line to Channel mapping */
++#include "platform.h"
+
-+ for(i = 0; i < 40; i++)
-+ avalanche_int_set(i,i);
++#define ENV_CELL_SIZE 16
+
-+ /* Now safe to set the exception vector. */
-+ set_except_vector(0, mipsIRQ);
++/* control field decode */
++#define ENV_GARBAGE_BIT 0x01 /* Env is garbage if this bit is off */
++#define ENV_DYNAMIC_BIT 0x02 /* Env is dynamic if this bit is off */
+
-+ /* Setup the IRQ description array. These will be mapped
-+ * as flat interrupts numbers. The mapping is as follows
-+ *
-+ * 0-7 MIPS CPU Exceptions (HW/SW)
-+ * 8-46 Primary Interrupts (Avalanche)
-+ * 47-78 Secondary Interrupts (Avalanche)
-+ */
++#define ENV_CTRL_MASK 0x03
++#define ENV_PREFINED (ENV_GARBAGE_BIT | ENV_DYNAMIC_BIT)
++#define ENV_DYNAMIC (ENV_GARBAGE_BIT)
+
-+ for (i = 0; i <= AVALANCHE_INT_END; i++)
-+ {
-+ irq_desc_ti[i].status = IRQ_DISABLED;
-+ irq_desc_ti[i].action = 0;
-+ irq_desc_ti[i].depth = 1;
-+ irq_desc_ti[i].handler = &avalanche_irq_type;
-+ }
++struct env_variable {
++ unsigned char varNum;
++ unsigned char ctrl;
++ unsigned short chksum;
++ unsigned char numCells;
++ unsigned char data[ENV_CELL_SIZE - 5]; /* The data section starts
++ * here, continues for
++ * numCells.
++ */
++};
+
-+#ifdef CONFIG_KGDB
-+ if (remote_debug)
-+ {
-+ set_debug_traps();
-+ breakpoint();
-+ }
++extern unsigned int max_env_entry;
++
++/* Internal macros */
++#define get_next_block(var) ((struct env_variable *)( (char*)(var) + (var)->numCells * ENV_CELL_SIZE))
++
++typedef enum ENV_VARS {
++ env_vars_start = 0,
++ CPUFREQ,
++ MEMSZ,
++ FLASHSZ,
++ MODETTY0,
++ MODETTY1,
++ PROMPT,
++ BOOTCFG,
++ HWA_0,
++#if !defined (AVALANCHE) || defined(TNETC401B)
++ HWA_1,
+#endif
-+}
++#if !defined(TNETV1020_BOARD)
++ HWA_RNDIS,
++#endif
++#if defined (TNETD73XX_BOARD)
++ HWA_3,
++#endif
++ IPA,
++ IPA_SVR,
++ BLINE_MAC0,
++#if !defined (AVALANCHE) || defined(TNETC401B)
++ BLINE_MAC1,
++#endif
++#if !defined(TNETV1020_BOARD)
++ BLINE_RNDIS,
++#endif
++#if defined (TNETD73XX_BOARD)
++ BLINE_ATM,
++#endif
++#if !defined(TNETV1020_BOARD)
++ USB_PID,
++ USB_VID,
++ USB_EPPOLLI,
++#endif
++ IPA_GATEWAY,
++ SUBNET_MASK,
++#if defined (TNETV1050_BOARD)
++ BLINE_ESWITCH,
++#endif
++#if !defined(TNETV1020_BOARD)
++ USB_SERIAL,
++ HWA_HRNDIS, /* Host (PC) side RNDIS address */
++#endif
++ REMOTE_USER,
++ REMOTE_PASS,
++ REMOTE_DIR,
++ SYSFREQ,
++ LINK_TIMEOUT,
++#ifndef AVALANCHE /* Avalanche boards use only one mac port */
++ MAC_PORT,
++#endif
++ PATH,
++ HOSTNAME,
++#ifdef WLAN
++ HW_REV_MAJOR,
++ HW_REV_MINOR,
++ HW_PATCH,
++ SW_PATCH,
++ SERIAL_NUMBER,
++#endif
++ TFTPCFG,
++#if defined (TNETV1050_BOARD)
++ HWA_ESWITCH,
++#endif
++ /*
++ * Add new env variables here.
++ * NOTE: New environment variables should always be placed at the end, ie
++ * just before env_vars_end.
++ */
+
++ env_vars_end
++} ENV_VARS;
+
-+void avalanche_hw0_irqdispatch(struct pt_regs *regs)
-+{
-+ struct irqaction *action;
-+ int irq, cpu = smp_processor_id();
-+ unsigned long int_line_number,status;
-+ int i,secondary = 0;
-+ int chan_nr=0;
+
-+ int_line_number = ((avalanche_hw0_icregs->pintir >> 16) & 0x3F);
-+ chan_nr = ((avalanche_hw0_icregs->pintir) & 0x3F);
++struct env_description {
++ ENV_VARS idx;
++ char *nm;
++ char *alias;
++};
++
++#define ENVSTR(x) #x
++#define _ENV_ENTRY(x) {.idx = x, .nm = ENVSTR(x), .alias = NULL}
++
++struct env_description env_ns[] = {
++ _ENV_ENTRY(env_vars_start), /* start. */
++ _ENV_ENTRY(CPUFREQ),
++ _ENV_ENTRY(MEMSZ),
++ _ENV_ENTRY(FLASHSZ),
++ _ENV_ENTRY(MODETTY0),
++ _ENV_ENTRY(MODETTY1),
++ _ENV_ENTRY(PROMPT),
++ _ENV_ENTRY(BOOTCFG),
++ _ENV_ENTRY(HWA_0),
++#if !defined (AVALANCHE) || defined(TNETC401B)
++ _ENV_ENTRY(HWA_1),
++#endif
++#if !defined(TNETV1020_BOARD)
++ _ENV_ENTRY(HWA_RNDIS),
++#endif
++#if defined (TNETD73XX_BOARD)
++ _ENV_ENTRY(HWA_3),
++#endif
++ _ENV_ENTRY(IPA),
++ _ENV_ENTRY(IPA_SVR),
++ _ENV_ENTRY(IPA_GATEWAY),
++ _ENV_ENTRY(SUBNET_MASK),
++ _ENV_ENTRY(BLINE_MAC0),
++#if !defined (AVALANCHE) || defined(TNETC401B)
++ _ENV_ENTRY(BLINE_MAC1),
++#endif
++#if !defined(TNETV1020_BOARD)
++ _ENV_ENTRY(BLINE_RNDIS),
++#endif
++#if defined (TNETD73XX_BOARD)
++ _ENV_ENTRY(BLINE_ATM),
++#endif
++#if !defined(TNETV1020_BOARD)
++ _ENV_ENTRY(USB_PID),
++ _ENV_ENTRY(USB_VID),
++ _ENV_ENTRY(USB_EPPOLLI),
++#endif
++#if defined (TNETV1050_BOARD)
++ _ENV_ENTRY(BLINE_ESWITCH),
++#endif
++#if !defined(TNETV1020_BOARD)
++ _ENV_ENTRY(USB_SERIAL),
++ _ENV_ENTRY(HWA_HRNDIS),
++#endif
++ _ENV_ENTRY(REMOTE_USER),
++ _ENV_ENTRY(REMOTE_PASS),
++ _ENV_ENTRY(REMOTE_DIR),
++ _ENV_ENTRY(SYSFREQ),
++ _ENV_ENTRY(LINK_TIMEOUT),
++#ifndef AVALANCHE /* Avalanche boards use only one mac port */
++ _ENV_ENTRY(MAC_PORT),
++#endif
++ _ENV_ENTRY(PATH),
++ _ENV_ENTRY(HOSTNAME),
++#ifdef WLAN
++ _ENV_ENTRY(HW_REV_MAJOR),
++ _ENV_ENTRY(HW_REV_MINOR),
++ _ENV_ENTRY(HW_PATCH),
++ _ENV_ENTRY(SW_PATCH),
++ _ENV_ENTRY(SERIAL_NUMBER),
++#endif
++ _ENV_ENTRY(TFTPCFG),
++#if defined (TNETV1050_BOARD)
++ _ENV_ENTRY(HWA_ESWITCH),
++#endif
++ /*
++ * Add new entries below this.
++ */
++ /* Adam2 environment name alias. */
++ { .idx = IPA, .nm = "my_ipaddress" },
++ { .idx = CPUFREQ, .nm = "cpufrequency" },
++ { .idx = SYSFREQ, .nm = "sysfrequency" },
++ { .idx = HWA_0, .nm = "maca" },
++#ifndef AVALANCHE
++ { .idx = HWA_1, .nm = "macb" },
++#endif
++ { .idx = MODETTY0, .nm = "modetty0" },
++ { .idx = MODETTY1, .nm = "modetty1" },
++ { .idx = MEMSZ, .nm = "memsize" },
+
++ _ENV_ENTRY(env_vars_end) /* delimiter. */
++};
+
-+ if(chan_nr < 32)
-+ {
-+ if( chan_nr != uni_secondary_interrupt)
-+ avalanche_hw0_icregs->intcr1 = (1<<chan_nr);
++static inline int var_to_idx(const char* var)
++{
++ int ii;
+
-+ }
++ /* go over the list of pre-defined environment variables */
++ for (ii = env_vars_start; env_ns[ii].idx != env_vars_end; ii++){
++ /* check if the env variable is listed */
++ if (strcmp(env_ns[ii].nm, var) == 0) {
++ return env_ns[ii].idx;
++ }
+
-+ if((chan_nr < 40) && (chan_nr > 31))
-+ {
-+ avalanche_hw0_icregs->intcr2 = (1<<(chan_nr-AVINTNUM(AVALANCHE_INT_END_SECONDARY)));
++ /* if an alias is present, check if the alias matches
++ * the description
++ */
++ if (env_ns[ii].alias != NULL) {
++ if (strcmp(env_ns[ii].alias, var) == 0) {
++ return env_ns[ii].idx;
++ }
++ }
+ }
++ return 0;
++}
+
++extern int *_prom_envp;
+
-+ /* If the Priority Interrupt Index Register returns 40 then no
-+ * interrupts are pending
-+ */
++/* FIXME: reading from the flash is extremly unstable. Sometime a read returns garbage,
++ * the next read some seconds later is ok. It looks like something is hidding or
++ * overlay the flash address at 0xb0000000. Is this possible?
++ *
++ * The readb() and while() usage below is a attempt of a workarround - with limited success.
++ */
+
-+ if(chan_nr == 40)
-+ return;
++static inline struct env_variable* get_var_by_number(int index)
++{
++ struct env_variable *env_var = (struct env_variable *)_prom_envp;
++ volatile unsigned char nr;
++ int i;
+
-+ if(chan_nr == uni_secondary_interrupt)
-+ {
-+ status = avalanche_hw0_ecregs->exsr;
-+ for(i=0; i < AVINTNUM(AVALANCHE_INT_END_SECONDARY); i++)
-+ {
-+ if (status & 1<<i)
-+ {
-+ /* clear secondary interrupt */
-+ avalanche_hw0_ecregs->excr = 1 << i;
-+ break;
++ env_var++; /* skip signature */
++
++ i = 0;
++ nr = readb(&(env_var->varNum));
++
++ while (i < max_env_entry && nr != 0xFF) {
++ if ((env_var->ctrl & ENV_CTRL_MASK) == ENV_PREFINED) {
++ if (nr == index) {
++ return env_var;
+ }
+ }
-+ irq = i;
-+ secondary = 1;
++ i++;
++ env_var = get_next_block(env_var);
++ nr = readb(&(env_var->varNum));
++ }
+
-+ /* clear the universal secondary interrupt */
-+ avalanche_hw0_icregs->intcr1 = 1 << uni_secondary_interrupt;
++ return NULL;
++}
+
-+ }
-+ else
-+ irq = chan_nr;
++static inline struct env_variable* get_var_by_name(char *var)
++{
++ struct env_variable *env_var = (struct env_variable *)_prom_envp;
++ volatile unsigned char nr;
++ int i;
+
-+ /* Suraj Add code to clear secondary interrupt */
++ env_var++; /* skip signature */
+
-+ if(secondary)
-+ action = hw0_irq_action_secondary[irq];
-+ else
-+ action = hw0_irq_action_primary[irq];
++ nr = readb(&(env_var->varNum));
++ i = 0;
+
-+ /* if action == NULL, then we don't have a handler for the irq */
++ while (i < max_env_entry && nr != 0xFF) {
++ if ((env_var->ctrl & ENV_CTRL_MASK) == ENV_DYNAMIC) {
++ if (strcmp(var, env_var->data) == 0)
++ return env_var;
++ }
++ i++;
++ env_var = get_next_block(env_var);
++ nr = readb(&(env_var->varNum));
++ }
++ return NULL;
++}
+
-+ if ( action == NULL ) {
-+ printk("No handler for hw0 irq: %i\n", irq);
-+ return;
-+ }
++static inline struct env_variable* get_var(char *var)
++{
++ int index = var_to_idx(var);
+
-+ irq_enter(cpu,irq);
-+ if(secondary)
-+ {
-+ kstat.irqs[0][(irq + AVINTNUM(AVALANCHE_INT_END_PRIMARY)) + 8]++;
-+ action->handler((irq + AVALANCHE_INT_END_PRIMARY), action->dev_id, regs);
-+ }
++ if (index)
++ return get_var_by_number(index);
+ else
-+ {
-+ kstat.irqs[0][irq + 8]++;
-+ action->handler(LNXINTNUM(irq), action->dev_id, regs);
-+ }
++ return get_var_by_name(var);
+
-+ irq_exit(cpu,irq);
-+
-+ if(softirq_pending(cpu))
-+ do_softirq();
-+
-+ return;
++ return NULL;
+}
+
-+void avalanche_int_set(int channel, int line)
++static inline char *get_value(struct env_variable* env_var)
+{
-+ switch(channel)
-+ {
-+ case(0):
-+ avalanche_hw0_chregs->cintnr0 = line;
-+ break;
-+ case(1):
-+ avalanche_hw0_chregs->cintnr1 = line;
-+ break;
-+ case(2):
-+ avalanche_hw0_chregs->cintnr2 = line;
-+ break;
-+ case(3):
-+ avalanche_hw0_chregs->cintnr3 = line;
-+ break;
-+ case(4):
-+ avalanche_hw0_chregs->cintnr4 = line;
-+ break;
-+ case(5):
-+ avalanche_hw0_chregs->cintnr5 = line;
-+ break;
-+ case(6):
-+ avalanche_hw0_chregs->cintnr6 = line;
-+ break;
-+ case(7):
-+ avalanche_hw0_chregs->cintnr7 = line;
-+ break;
-+ case(8):
-+ avalanche_hw0_chregs->cintnr8 = line;
-+ break;
-+ case(9):
-+ avalanche_hw0_chregs->cintnr9 = line;
-+ break;
-+ case(10):
-+ avalanche_hw0_chregs->cintnr10 = line;
-+ break;
-+ case(11):
-+ avalanche_hw0_chregs->cintnr11 = line;
-+ break;
-+ case(12):
-+ avalanche_hw0_chregs->cintnr12 = line;
-+ break;
-+ case(13):
-+ avalanche_hw0_chregs->cintnr13 = line;
-+ break;
-+ case(14):
-+ avalanche_hw0_chregs->cintnr14 = line;
-+ break;
-+ case(15):
-+ avalanche_hw0_chregs->cintnr15 = line;
-+ break;
-+ case(16):
-+ avalanche_hw0_chregs->cintnr16 = line;
-+ break;
-+ case(17):
-+ avalanche_hw0_chregs->cintnr17 = line;
-+ break;
-+ case(18):
-+ avalanche_hw0_chregs->cintnr18 = line;
-+ break;
-+ case(19):
-+ avalanche_hw0_chregs->cintnr19 = line;
-+ break;
-+ case(20):
-+ avalanche_hw0_chregs->cintnr20 = line;
-+ break;
-+ case(21):
-+ avalanche_hw0_chregs->cintnr21 = line;
-+ break;
-+ case(22):
-+ avalanche_hw0_chregs->cintnr22 = line;
-+ break;
-+ case(23):
-+ avalanche_hw0_chregs->cintnr23 = line;
-+ break;
-+ case(24):
-+ avalanche_hw0_chregs->cintnr24 = line;
-+ break;
-+ case(25):
-+ avalanche_hw0_chregs->cintnr25 = line;
-+ break;
-+ case(26):
-+ avalanche_hw0_chregs->cintnr26 = line;
-+ break;
-+ case(27):
-+ avalanche_hw0_chregs->cintnr27 = line;
-+ break;
-+ case(28):
-+ avalanche_hw0_chregs->cintnr28 = line;
-+ break;
-+ case(29):
-+ avalanche_hw0_chregs->cintnr29 = line;
-+ break;
-+ case(30):
-+ avalanche_hw0_chregs->cintnr30 = line;
-+ break;
-+ case(31):
-+ avalanche_hw0_chregs->cintnr31 = line;
-+ break;
-+ case(32):
-+ avalanche_hw0_chregs->cintnr32 = line;
-+ break;
-+ case(33):
-+ avalanche_hw0_chregs->cintnr33 = line;
-+ break;
-+ case(34):
-+ avalanche_hw0_chregs->cintnr34 = line;
-+ break;
-+ case(35):
-+ avalanche_hw0_chregs->cintnr35 = line;
-+ break;
-+ case(36):
-+ avalanche_hw0_chregs->cintnr36 = line;
-+ break;
-+ case(37):
-+ avalanche_hw0_chregs->cintnr37 = line;
-+ break;
-+ case(38):
-+ avalanche_hw0_chregs->cintnr38 = line;
-+ break;
-+ case(39):
-+ avalanche_hw0_chregs->cintnr39 = line;
-+ break;
-+ default:
-+ printk("Error: Unknown Avalanche interrupt channel\n");
-+ }
++ unsigned char *name;
++ unsigned char *value;
++ unsigned short chksum;
++ int i;
+
-+ line_to_channel[line] = channel; /* Suraj check */
++ chksum = env_var->varNum + env_var->ctrl + env_var->numCells;
+
-+ if (channel == UNIFIED_SECONDARY_INTERRUPT)
-+ uni_secondary_interrupt = line;
++ if ((env_var->ctrl & ENV_CTRL_MASK) == ENV_DYNAMIC) {
++ name = env_var->data;
++ value = env_var->data + strlen(name) + 1;
+
-+}
++ for(i = 0; i < strlen(name); i++)
++ chksum += name[i];
++ } else
++ value = env_var->data;
+
++ for (i = 0; i < strlen(value); i++)
++ chksum += value[i];
+
-+#define AVALANCHE_MAX_PACING_BLK 3
-+#define AVALANCHE_PACING_LOW_VAL 2
-+#define AVALANCHE_PACING_HIGH_VAL 63
++ chksum += env_var->chksum;
++ chksum = ~(chksum);
+
-+int avalanche_request_pacing(int irq_nr, unsigned int blk_num,
-+ unsigned int pace_value)
-+{
-+ unsigned int blk_offset;
-+ unsigned long flags;
++ if(chksum != 0) {
++ return NULL;
++ }
+
-+ if(irq_nr < MIPS_EXCEPTION_OFFSET &&
-+ irq_nr >= AVALANCHE_INT_END_PRIMARY)
-+ return (0);
++ return value;
++}
+
-+ if(blk_num > AVALANCHE_MAX_PACING_BLK)
-+ return(-1);
++struct psbl_rec {
++ unsigned int psbl_size;
++ unsigned int env_base;
++ unsigned int env_size;
++ unsigned int ffs_base;
++ unsigned int ffs_size;
++};
+
-+ if(pace_value > AVALANCHE_PACING_HIGH_VAL &&
-+ pace_value < AVALANCHE_PACING_LOW_VAL)
-+ return(-1);
-+
-+ blk_offset = blk_num*8;
-+
-+ save_and_cli(flags);
-+
-+ /* disable the interrupt pacing, if enabled previously */
-+ avalanche_hw0_ipaceregs->ipacemax &= ~(0xff << blk_offset);
-+
-+ /* clear the pacing map */
-+ avalanche_hw0_ipaceregs->ipacemap &= ~(0xff << blk_offset);
-+
-+ /* setup the new values */
-+ avalanche_hw0_ipaceregs->ipacemap |= ((AVINTNUM(irq_nr)) << blk_offset);
-+ avalanche_hw0_ipaceregs->ipacemax |= ((0x80 | pace_value) << blk_offset);
-+
-+ restore_flags(flags);
-+
-+ return(0);
-+}
-diff -urN linux.old/arch/mips/ar7/Makefile linux.dev/arch/mips/ar7/Makefile
---- linux.old/arch/mips/ar7/Makefile 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/ar7/Makefile 2005-07-12 02:59:43.730002448 +0200
-@@ -0,0 +1,13 @@
-+.S.s:
-+ $(CPP) $(AFLAGS) $< -o $*.s
-+
-+.S.o:
-+ $(CC) $(AFLAGS) -c $< -o $*.o
-+
-+EXTRA_CFLAGS := -I$(TOPDIR)/include/asm/ar7 -DLITTLE_ENDIAN -D_LINK_KSEG0_
-+O_TARGET := ar7.o
-+
-+obj-y := tnetd73xx_misc.o
-+obj-y += setup.o irq.o mipsIRQ.o reset.o init.o memory.o printf.o cmdline.o time.o
-+
-+include $(TOPDIR)/Rules.make
-diff -urN linux.old/arch/mips/ar7/memory.c linux.dev/arch/mips/ar7/memory.c
---- linux.old/arch/mips/ar7/memory.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/ar7/memory.c 2005-07-12 02:59:26.190668832 +0200
-@@ -0,0 +1,130 @@
-+/*
-+ * Carsten Langgaard, carstenl@mips.com
-+ * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
-+ *
-+ * ########################################################################
-+ *
-+ * This program is free software; you can distribute it and/or modify it
-+ * under the terms of the GNU General Public License (Version 2) as
-+ * published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope it will be useful, but WITHOUT
-+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-+ * for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License along
-+ * with this program; if not, write to the Free Software Foundation, Inc.,
-+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-+ *
-+ * ########################################################################
-+ *
-+ * PROM library functions for acquiring/using memory descriptors given to
-+ * us from the YAMON.
-+ *
-+ */
-+#include <linux/config.h>
-+#include <linux/init.h>
-+#include <linux/mm.h>
-+#include <linux/bootmem.h>
-+
-+#include <asm/bootinfo.h>
-+#include <asm/page.h>
-+#include <asm/mips-boards/prom.h>
-+#include <asm/ar7/ar7.h>
-+
-+enum yamon_memtypes {
-+ yamon_dontuse,
-+ yamon_prom,
-+ yamon_free,
-+};
-+struct prom_pmemblock mdesc[PROM_MAX_PMEMBLOCKS];
-+
-+/* References to section boundaries */
-+extern char _end;
-+
-+#define PFN_ALIGN(x) (((unsigned long)(x) + (PAGE_SIZE - 1)) & PAGE_MASK)
-+
-+
-+struct prom_pmemblock * __init prom_getmdesc(void)
-+{
-+ char *memsize_str;
-+ unsigned int memsize;
-+
-+ memsize_str = prom_getenv("memsize");
-+ if (!memsize_str) {
-+ memsize = 0x02000000;
-+ } else {
-+ memsize = simple_strtol(memsize_str, NULL, 0);
-+ }
-+
-+ memset(mdesc, 0, sizeof(mdesc));
-+
-+ mdesc[0].type = yamon_dontuse;
-+ mdesc[0].base = 0x00000000;
-+ mdesc[0].size = CONFIG_AR7_MEMORY;
-+
-+ mdesc[1].type = yamon_prom;
-+ mdesc[1].base = CONFIG_AR7_MEMORY;
-+ mdesc[1].size = 0x00020000;
-+
-+ mdesc[2].type = yamon_free;
-+ mdesc[2].base = CONFIG_AR7_MEMORY + 0x00020000;
-+ mdesc[2].size = (memsize + CONFIG_AR7_MEMORY) - mdesc[2].base;
-+
-+ return &mdesc[0];
-+}
-+
-+static int __init prom_memtype_classify (unsigned int type)
-+{
-+ switch (type) {
-+ case yamon_free:
-+ return BOOT_MEM_RAM;
-+ case yamon_prom:
-+ return BOOT_MEM_ROM_DATA;
-+ default:
-+ return BOOT_MEM_RESERVED;
-+ }
-+}
-+
-+void __init prom_meminit(void)
++char *prom_psp_getenv(char *envname)
+{
-+ struct prom_pmemblock *p;
-+
-+ p = prom_getmdesc();
-+
-+ while (p->size) {
-+ long type;
-+ unsigned long base, size;
-+
-+ type = prom_memtype_classify (p->type);
-+ base = p->base;
-+ size = p->size;
++ struct env_variable* env_var;
++ char *value;
+
-+ add_memory_region(base, size, type);
-+ p++;
-+ }
-+}
++ if (strcmp("bootloader", envname) == 0)
++ return "PSPBoot";
+
-+void __init prom_free_prom_memory (void)
-+{
-+ int i;
-+ unsigned long freed = 0;
-+ unsigned long addr;
++ if (!(env_var = get_var(envname)))
++ return NULL;
+
-+ for (i = 0; i < boot_mem_map.nr_map; i++) {
-+ if (boot_mem_map.map[i].type != BOOT_MEM_ROM_DATA)
-+ continue;
++ value = get_value(env_var);
+
-+ addr = boot_mem_map.map[i].addr;
-+ while (addr < boot_mem_map.map[i].addr
-+ + boot_mem_map.map[i].size) {
-+ ClearPageReserved(virt_to_page(__va(addr)));
-+ set_page_count(virt_to_page(__va(addr)), 1);
-+ free_page((unsigned long)__va(addr));
-+ addr += PAGE_SIZE;
-+ freed += PAGE_SIZE;
-+ }
-+ }
-+ printk("Freeing prom memory: %ldkb freed\n", freed >> 10);
++ return value;
+}
-diff -urN linux.old/arch/mips/ar7/mipsIRQ.S linux.dev/arch/mips/ar7/mipsIRQ.S
---- linux.old/arch/mips/ar7/mipsIRQ.S 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/ar7/mipsIRQ.S 2005-07-12 02:59:26.191668680 +0200
-@@ -0,0 +1,120 @@
+diff -urN linux.old/arch/mips/ar7/reset.c linux.dev/arch/mips/ar7/reset.c
+--- linux.old/arch/mips/ar7/reset.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/arch/mips/ar7/reset.c 2005-11-10 01:14:16.372731750 +0100
+@@ -0,0 +1,98 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
-+ * Copyright (C) 1999, 2000 MIPS Technologies, Inc. All rights reserved.
++ * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
+ *
+ * ########################################################################
+ *
+ *
+ * ########################################################################
+ *
-+ * Interrupt exception dispatch code.
-+ *
-+ */
-+#include <linux/config.h>
-+
-+#include <asm/asm.h>
-+#include <asm/mipsregs.h>
-+#include <asm/regdef.h>
-+#include <asm/stackframe.h>
-+
-+/* A lot of complication here is taken away because:
-+ *
-+ * 1) We handle one interrupt and return, sitting in a loop and moving across
-+ * all the pending IRQ bits in the cause register is _NOT_ the answer, the
-+ * common case is one pending IRQ so optimize in that direction.
-+ *
-+ * 2) We need not check against bits in the status register IRQ mask, that
-+ * would make this routine slow as hell.
-+ *
-+ * 3) Linux only thinks in terms of all IRQs on or all IRQs off, nothing in
-+ * between like BSD spl() brain-damage.
-+ *
-+ * Furthermore, the IRQs on the MIPS board look basically (barring software
-+ * IRQs which we don't use at all and all external interrupt sources are
-+ * combined together on hardware interrupt 0 (MIPS IRQ 2)) like:
-+ *
-+ * MIPS IRQ Source
-+ * -------- ------
-+ * 0 Software (ignored)
-+ * 1 Software (ignored)
-+ * 2 Combined hardware interrupt (hw0)
-+ * 3 Hardware (ignored)
-+ * 4 Hardware (ignored)
-+ * 5 Hardware (ignored)
-+ * 6 Hardware (ignored)
-+ * 7 R4k timer (what we use)
-+ *
-+ * Note: On the SEAD board thing are a little bit different.
-+ * Here IRQ 2 (hw0) is wired to the UART0 and IRQ 3 (hw1) is wired
-+ * wired to UART1.
++ * Reset the AR7 boards.
+ *
-+ * We handle the IRQ according to _our_ priority which is:
-+ *
-+ * Highest ---- R4k Timer
-+ * Lowest ---- Combined hardware interrupt
-+ *
-+ * then we just return, if multiple IRQs are pending then we will just take
-+ * another exception, big deal.
-+ */
-+
-+.text
-+.set noreorder
-+.set noat
-+ .align 5
-+NESTED(mipsIRQ, PT_SIZE, sp)
-+ SAVE_ALL
-+ CLI
-+ .set at
-+
-+ mfc0 s0, CP0_CAUSE # get irq bits
-+
-+ /* First we check for r4k counter/timer IRQ. */
-+ andi a0, s0, CAUSEF_IP7
-+ beq a0, zero, 1f
-+ andi a0, s0, CAUSEF_IP2 # delay slot, check hw0 interrupt
-+
-+ /* Wheee, a timer interrupt. */
-+ move a0, sp
-+ jal ar7_timer_interrupt
-+ nop
-+
-+ j ret_from_irq
-+ nop
-+
-+ 1:
-+ beq a0, zero, 1f # delay slot, check hw3 interrupt
-+ nop
-+
-+ /* Wheee, combined hardware level zero interrupt. */
-+ jal avalanche_hw0_irqdispatch
-+ move a0, sp # delay slot
-+
-+ j ret_from_irq
-+ nop # delay slot
-+
-+ 1:
-+ /*
-+ * Here by mistake? This is possible, what can happen is that by the
-+ * time we take the exception the IRQ pin goes low, so just leave if
-+ * this is the case.
-+ */
-+ move a1,s0
-+ PRINT("Got interrupt: c0_cause = %08x\n")
-+ mfc0 a1, CP0_EPC
-+ PRINT("c0_epc = %08x\n")
-+
-+ j ret_from_irq
-+ nop
-+END(mipsIRQ)
-diff -urN linux.old/arch/mips/ar7/printf.c linux.dev/arch/mips/ar7/printf.c
---- linux.old/arch/mips/ar7/printf.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/ar7/printf.c 2005-07-12 02:59:26.191668680 +0200
-@@ -0,0 +1,54 @@
-+/*
-+ * Carsten Langgaard, carstenl@mips.com
-+ * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
-+ *
-+ * This program is free software; you can distribute it and/or modify it
-+ * under the terms of the GNU General Public License (Version 2) as
-+ * published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope it will be useful, but WITHOUT
-+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-+ * for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License along
-+ * with this program; if not, write to the Free Software Foundation, Inc.,
-+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-+ *
-+ * Putting things on the screen/serial line using Adam2 facilities.
+ */
+
-+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
-+#include <linux/serial_reg.h>
-+#include <linux/spinlock.h>
-+#include <asm/io.h>
-+#include <asm/serial.h>
-+#include <asm/addrspace.h>
-+#include <asm/ar7/ar7.h>
-+
-+#define AVALANCHE_YAMON_FUNCTION_BASE (KSEG1ADDR(0x10000500))
-+#define AVALANCHE_YAMON_PROM_PRINT_COUNT_ADDR (AVALANCHE_YAMON_FUNCTION_BASE + 0x4) /* print_count function */
-+
-+static char ppbuf[1024];
-+
-+void (*prom_print_str)(unsigned int out, char *s, int len);
-+
-+void prom_printf(char *fmt, ...) __init;
-+void prom_printf(char *fmt, ...)
-+{
-+ va_list args;
-+ int len;
-+ prom_print_str = (void *)*(unsigned int *)AVALANCHE_YAMON_PROM_PRINT_COUNT_ADDR;
-+
-+ va_start(args, fmt);
-+ vsprintf(ppbuf, fmt, args);
-+ len = strlen(ppbuf);
-+
-+ prom_print_str(1, ppbuf, len);
++#include <linux/string.h>
++#include <linux/types.h>
+
-+ va_end(args);
-+ return;
++#include <asm/mipsregs.h>
++#include <asm/reboot.h>
++#include <asm/addrspace.h>
+
-+}
-diff -urN linux.old/arch/mips/ar7/reset.c linux.dev/arch/mips/ar7/reset.c
---- linux.old/arch/mips/ar7/reset.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/ar7/reset.c 2005-07-12 02:59:26.191668680 +0200
-@@ -0,0 +1,54 @@
-+/*
-+ * Carsten Langgaard, carstenl@mips.com
-+ * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
-+ *
-+ * ########################################################################
-+ *
-+ * This program is free software; you can distribute it and/or modify it
-+ * under the terms of the GNU General Public License (Version 2) as
-+ * published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope it will be useful, but WITHOUT
-+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-+ * for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License along
-+ * with this program; if not, write to the Free Software Foundation, Inc.,
-+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-+ *
-+ * ########################################################################
-+ *
-+ * Reset the MIPS boards.
-+ *
-+ */
-+#include <linux/config.h>
++int preserve_adam2 = 1;
+
-+#include <asm/reboot.h>
-+#include <asm/mips-boards/generic.h>
++extern void adam2_exit(int retval);
+
+static void ar7_machine_restart(char *command);
+static void ar7_machine_halt(void);
+
+static void ar7_machine_restart(char *command)
+{
++ volatile uint32_t *softres_reg = (void *)(KSEG1ADDR(0x08611600 + 0x4));
+
++ *softres_reg = 1;
+}
+
+static void ar7_machine_halt(void)
+{
+
++ if (preserve_adam2) {
++ set_c0_status(ST0_BEV);
++ adam2_exit(0);
++ } else {
++ /* I'd like to have Alt-SysRq-b work in this state.
++ * What's missing here? The timer interrupt is still running.
++ * Why doesn't the UART work anymore? */
++ while(1) {
++ __asm__(".set\tmips3\n\t"
++ "wait\n\t"
++ ".set\tmips0");
++ }
++ }
+}
+
+static void ar7_machine_power_off(void)
+{
++ volatile uint32_t *power_reg = (void *)(KSEG1ADDR(0x08610A00));
++ uint32_t power_state = *power_reg;
++
++ /* add something to turn LEDs off? */
+
++ power_state &= ~(3 << 30);
++ power_state |= (3 << 30); /* power down */
++ *power_reg = power_state;
++
++ printk("after power down?\n");
+}
+
+void ar7_reboot_setup(void)
+ _machine_halt = ar7_machine_halt;
+ _machine_power_off = ar7_machine_power_off;
+}
++
++static int __init ar7_do_preserve_adam2(char *s)
++{
++ if (!strcmp(s, "no") || !strcmp(s, "0"))
++ preserve_adam2 = 0;
++ else
++ preserve_adam2 = 1;
++ return 1;
++}
++
++__setup("adam2=", ar7_do_preserve_adam2);
diff -urN linux.old/arch/mips/ar7/setup.c linux.dev/arch/mips/ar7/setup.c
--- linux.old/arch/mips/ar7/setup.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/ar7/setup.c 2005-07-12 02:59:26.191668680 +0200
-@@ -0,0 +1,120 @@
++++ linux.dev/arch/mips/ar7/setup.c 2005-11-10 01:12:43.946955500 +0100
+@@ -0,0 +1,143 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
++
+#include <linux/config.h>
+#include <linux/init.h>
-+#include <linux/sched.h>
-+#include <linux/mc146818rtc.h>
-+#include <linux/ioport.h>
++#include <linux/string.h>
++#include <linux/irq.h>
+
-+#include <asm/cpu.h>
-+#include <asm/bootinfo.h>
++#include <asm/processor.h>
+#include <asm/irq.h>
-+#include <asm/mips-boards/generic.h>
-+#include <asm/mips-boards/prom.h>
-+
-+#include <asm/dma.h>
++#include <asm/irq_cpu.h>
+#include <asm/time.h>
-+#include <asm/traps.h>
++#include <asm/mipsregs.h>
++#include <asm/mips-boards/prom.h>
+
+#ifdef CONFIG_KGDB
+extern void rs_kgdb_hook(int);
++extern void breakpoint(void);
+int remote_debug = 0;
+#endif
+
-+extern struct rtc_ops no_rtc_ops;
-+
+extern void ar7_reboot_setup(void);
++extern void ar7_irq_init(int);
++extern asmlinkage void ar7IRQ(void);
++
++void ar7_time_init(void)
++{
++ /* XXX runtime */
++ mips_hpt_frequency = CONFIG_AR7_CPU * 500000;
++}
++
++void ar7_timer_setup(struct irqaction *irq)
++{
++ setup_irq(7, irq);
++ set_c0_status(IE_IRQ5);
++}
++
++void __init init_IRQ(void)
++{
++ init_generic_irq();
++ mips_cpu_irq_init(0);
++ ar7_irq_init(8);
+
-+extern void ar7_time_init(void);
-+extern void ar7_timer_setup(struct irqaction *irq);
++ /* Now safe to set the exception vector. */
++ set_except_vector(0, ar7IRQ);
++
++#ifdef CONFIG_KGDB
++ if (remote_debug)
++ {
++ set_debug_traps();
++ breakpoint();
++ }
++#endif
++}
+
+const char *get_system_type(void)
+{
+ if ((argptr = strstr(argptr, "nofpu")) != NULL)
+ cpu_data[0].options &= ~MIPS_CPU_FPU;
+
-+ rtc_ops = &no_rtc_ops;
-+
+ ar7_reboot_setup();
+
+ board_time_init = ar7_time_init;
+ board_timer_setup = ar7_timer_setup;
+}
-diff -urN linux.old/arch/mips/ar7/time.c linux.dev/arch/mips/ar7/time.c
---- linux.old/arch/mips/ar7/time.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/ar7/time.c 2005-07-12 02:59:26.192668528 +0200
-@@ -0,0 +1,125 @@
-+/*
-+ * Carsten Langgaard, carstenl@mips.com
-+ * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
-+ *
-+ * ########################################################################
-+ *
-+ * This program is free software; you can distribute it and/or modify it
-+ * under the terms of the GNU General Public License (Version 2) as
-+ * published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope it will be useful, but WITHOUT
-+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-+ * for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License along
-+ * with this program; if not, write to the Free Software Foundation, Inc.,
-+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-+ *
-+ * ########################################################################
-+ *
-+ * Setting up the clock on the MIPS boards.
-+ *
-+ */
-+
-+#include <linux/types.h>
-+#include <linux/config.h>
-+#include <linux/init.h>
-+#include <linux/kernel_stat.h>
-+#include <linux/sched.h>
-+#include <linux/spinlock.h>
-+
-+#include <asm/mipsregs.h>
-+#include <asm/ptrace.h>
-+#include <asm/hardirq.h>
-+#include <asm/div64.h>
-+
-+#include <linux/interrupt.h>
-+#include <linux/mc146818rtc.h>
-+#include <linux/timex.h>
-+
-+#include <asm/mips-boards/generic.h>
-+#include <asm/mips-boards/prom.h>
-+#include <asm/ar7/ar7.h>
-+
-+extern asmlinkage void mipsIRQ(void);
-+
-+static unsigned long r4k_offset; /* Amount to increment compare reg each time */
-+static unsigned long r4k_cur; /* What counter should be at next timer irq */
-+
-+#define MIPS_CPU_TIMER_IRQ 7
-+#define ALLINTS (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4 | IE_IRQ5)
-+
-+static inline void ack_r4ktimer(unsigned long newval)
-+{
-+ write_c0_compare(newval);
-+}
-+
-+void ar7_timer_interrupt(struct pt_regs *regs)
-+{
-+ int cpu = smp_processor_id();
-+
-+ irq_enter(cpu, MIPS_CPU_TIMER_IRQ);
-+
-+ if (r4k_offset == 0)
-+ goto null;
-+
-+ do {
-+ kstat.irqs[cpu][MIPS_CPU_TIMER_IRQ]++;
-+ do_timer(regs);
-+ r4k_cur += r4k_offset;
-+ ack_r4ktimer(r4k_cur);
-+
-+ } while (((unsigned long)read_c0_count()
-+ - r4k_cur) < 0x7fffffff);
-+
-+ irq_exit(cpu, MIPS_CPU_TIMER_IRQ);
-+
-+ if (softirq_pending(cpu))
-+ do_softirq();
-+
-+ return;
-+
-+null:
-+ ack_r4ktimer(0);
-+}
-+
-+/*
-+ * Figure out the r4k offset, the amount to increment the compare
-+ * register for each time tick.
-+ */
-+static unsigned long __init cal_r4koff(void)
-+{
-+ return ((CONFIG_AR7_CPU_FREQUENCY*500000)/HZ);
-+}
-+
-+void __init ar7_time_init(void)
-+{
-+ unsigned long flags;
-+ unsigned int est_freq;
-+
-+ set_except_vector(0, mipsIRQ);
-+ write_c0_count(0);
-+
-+ printk("calculating r4koff... ");
-+ r4k_offset = cal_r4koff();
-+ printk("%08lx(%d)\n", r4k_offset, (int) r4k_offset);
-+
-+ est_freq = 2*r4k_offset*HZ;
-+ est_freq += 5000; /* round */
-+ est_freq -= est_freq%10000;
-+ printk("CPU frequency %d.%02d MHz\n", est_freq/1000000,
-+ (est_freq%1000000)*100/1000000);
-+}
-+
-+void __init ar7_timer_setup(struct irqaction *irq)
-+{
-+ /* we are using the cpu counter for timer interrupts */
-+ irq->handler = no_action; /* we use our own handler */
-+ setup_irq(MIPS_CPU_TIMER_IRQ, irq);
-+
-+ r4k_cur = (read_c0_count() + r4k_offset);
-+ write_c0_compare(r4k_cur);
-+ set_c0_status(ALLINTS);
-+}
diff -urN linux.old/arch/mips/ar7/tnetd73xx_misc.c linux.dev/arch/mips/ar7/tnetd73xx_misc.c
--- linux.old/arch/mips/ar7/tnetd73xx_misc.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/ar7/tnetd73xx_misc.c 2005-07-12 02:59:43.731002296 +0200
-@@ -0,0 +1,924 @@
++++ linux.dev/arch/mips/ar7/tnetd73xx_misc.c 2005-11-10 01:12:43.946955500 +0100
+@@ -0,0 +1,921 @@
+/******************************************************************************
+ * FILE PURPOSE: TNETD73xx Misc modules API Source
+ ******************************************************************************
+ * (C) Copyright 2002, Texas Instruments, Inc
+ *******************************************************************************/
+
-+#define LITTLE_ENDIAN
-+#define _LINK_KSEG0_
-+
+#include <linux/types.h>
+#include <asm/ar7/tnetd73xx.h>
+#include <asm/ar7/tnetd73xx_misc.h>
+}
+
diff -urN linux.old/arch/mips/config-shared.in linux.dev/arch/mips/config-shared.in
---- linux.old/arch/mips/config-shared.in 2005-07-10 03:00:44.784181376 +0200
-+++ linux.dev/arch/mips/config-shared.in 2005-07-12 02:59:26.192668528 +0200
+--- linux.old/arch/mips/config-shared.in 2005-10-21 16:43:18.917114000 +0200
++++ linux.dev/arch/mips/config-shared.in 2005-11-10 01:12:43.950955750 +0100
@@ -20,6 +20,16 @@
mainmenu_option next_comment
comment 'Machine selection'
+ "AR7DB CONFIG_AR7DB \
+ AR7RD CONFIG_AR7RD \
+ AR7WRD CONFIG_AR7WRD" AR7DB
-+ int 'Texas Instruments AR7 CPU Frequency' CONFIG_AR7_CPU_FREQUENCY 150
-+ int 'Texas Instruments AR7 System Frequency' CONFIG_AR7_SYS_FREQUENCY 125
++ int 'Texas Instruments AR7 CPU Frequency' CONFIG_AR7_CPU 150
++ int 'Texas Instruments AR7 System Frequency' CONFIG_AR7_SYS 125
+ hex 'Texas Instruments AR7 SDRAM Start' CONFIG_AR7_MEMORY 0x14000000
+fi
dep_bool 'Support for Alchemy Bosporus board' CONFIG_MIPS_BOSPORUS $CONFIG_MIPS32
define_bool CONFIG_PC_KEYB y
fi
+if [ "$CONFIG_AR7" = "y" ]; then
++ define_bool CONFIG_IRQ_CPU y
+ define_bool CONFIG_NONCOHERENT_IO y
+ define_bool CONFIG_SWAP_IO_SPACE y
-+ define_bool CONFIG_AR7_PAGING y
+fi
if [ "$CONFIG_CASIO_E55" = "y" ]; then
define_bool CONFIG_IRQ_CPU y
"$CONFIG_CASIO_E55" = "y" -o \
"$CONFIG_DECSTATION" = "y" -o \
"$CONFIG_IBM_WORKPAD" = "y" -o \
-diff -urN linux.old/arch/mips/kernel/irq.c linux.dev/arch/mips/kernel/irq.c
---- linux.old/arch/mips/kernel/irq.c 2005-07-10 03:00:44.784181376 +0200
-+++ linux.dev/arch/mips/kernel/irq.c 2005-07-12 02:59:26.193668376 +0200
-@@ -76,6 +76,7 @@
- * Generic, controller-independent functions:
- */
-
-+#ifndef CONFIG_AR7
- int get_irq_list(char *buf)
- {
- int i, j;
-@@ -110,6 +111,7 @@
- p += sprintf(p, "ERR: %10u\n", atomic_read(&irq_err_count));
- return p - buf;
- }
-+#endif
-
- #ifdef CONFIG_SMP
- int global_irq_holder = NO_PROC_ID;
-@@ -525,6 +527,7 @@
- *
- */
-
-+#ifndef CONFIG_AR7
- int request_irq(unsigned int irq,
- void (*handler)(int, void *, struct pt_regs *),
- unsigned long irqflags,
-@@ -569,6 +572,7 @@
- kfree(action);
- return retval;
- }
-+#endif
-
- /**
- * free_irq - free an interrupt
-@@ -588,6 +592,7 @@
- * the machine.
- */
+diff -urN linux.old/arch/mips/kernel/head.S linux.dev/arch/mips/kernel/head.S
+--- linux.old/arch/mips/kernel/head.S 2005-10-21 16:43:16.396956500 +0200
++++ linux.dev/arch/mips/kernel/head.S 2005-11-10 01:10:45.807572250 +0100
+@@ -75,11 +75,11 @@
+ * size!
+ */
+ NESTED(except_vec4, 0, sp)
+- .set push
+- .set noreorder
+-1: j 1b /* Dummy, will be replaced */
+- nop
+- .set pop
++ .set mips2
++ lui k0, 0x9400
++ ori k0, 0x200
++ jr k0
++ nop
+ END(except_vec4)
-+#ifndef CONFIG_AR7
- void free_irq(unsigned int irq, void *dev_id)
- {
- irq_desc_t *desc;
-@@ -629,6 +634,7 @@
- return;
- }
- }
-+#endif
-
- /*
- * IRQ autodetection code..
+ /*
diff -urN linux.old/arch/mips/kernel/mips_ksyms.c linux.dev/arch/mips/kernel/mips_ksyms.c
--- linux.old/arch/mips/kernel/mips_ksyms.c 2004-02-18 14:36:30.000000000 +0100
-+++ linux.dev/arch/mips/kernel/mips_ksyms.c 2005-07-12 02:59:26.193668376 +0200
++++ linux.dev/arch/mips/kernel/mips_ksyms.c 2005-11-10 01:10:45.811572500 +0100
@@ -40,6 +40,12 @@
extern long __strnlen_user_nocheck_asm(const char *s);
extern long __strnlen_user_asm(const char *s);
+#ifdef CONFIG_AR7
++#include <asm/ar7/adam2_env.h>
+int avalanche_request_pacing(int irq_nr, unsigned int blk_num, unsigned int pace_value);
-+char *prom_getenv(char *envname);
+#endif
+
+
EXPORT_SYMBOL(mips_machtype);
#ifdef CONFIG_EISA
EXPORT_SYMBOL(EISA_bus);
-@@ -103,3 +109,9 @@
+@@ -103,3 +109,10 @@
#endif
EXPORT_SYMBOL(get_wchan);
+#ifdef CONFIG_AR7
+EXPORT_SYMBOL_NOVERS(avalanche_request_pacing);
+EXPORT_SYMBOL_NOVERS(prom_getenv);
++EXPORT_SYMBOL_NOVERS(prom_iterenv);
+#endif
+
diff -urN linux.old/arch/mips/kernel/setup.c linux.dev/arch/mips/kernel/setup.c
---- linux.old/arch/mips/kernel/setup.c 2005-07-10 03:00:44.785181224 +0200
-+++ linux.dev/arch/mips/kernel/setup.c 2005-07-12 02:59:26.194668224 +0200
-@@ -109,6 +109,7 @@
- unsigned long isa_slot_offset;
- EXPORT_SYMBOL(isa_slot_offset);
+--- linux.old/arch/mips/kernel/setup.c 2005-10-21 16:43:16.396956500 +0200
++++ linux.dev/arch/mips/kernel/setup.c 2005-11-10 01:14:16.376732000 +0100
+@@ -38,6 +38,7 @@
+ #include <asm/io.h>
+ #include <asm/ptrace.h>
+ #include <asm/system.h>
++#include <asm/addrspace.h>
-+extern void avalanche_bootmem_init(void);
- extern void SetUpBootInfo(void);
- extern void load_mmu(void);
- extern asmlinkage void start_kernel(void);
-@@ -267,6 +268,9 @@
- #endif /* CONFIG_BLK_DEV_INITRD */
+ struct cpuinfo_mips cpu_data[NR_CPUS];
+ EXPORT_SYMBOL(cpu_data);
+@@ -88,7 +89,7 @@
+ struct boot_mem_map boot_mem_map;
- /* Find the highest page frame number we have available. */
-+#ifdef CONFIG_AR7_PAGING
-+ avalanche_bootmem_init();
-+#else
- max_pfn = 0;
- first_usable_pfn = -1UL;
+ unsigned char aux_device_present;
+-extern char _ftext, _etext, _fdata, _edata, _end;
++extern char _ftext, _etext, _fdata, _edata, _fbss, _end;
+
+ static char command_line[CL_SIZE];
+ char saved_command_line[CL_SIZE];
+@@ -116,6 +117,7 @@
+
+ static struct resource code_resource = { "Kernel code" };
+ static struct resource data_resource = { "Kernel data" };
++static struct resource bss_resource = { "Kernel bss" };
+
+ asmlinkage void __init
+ init_arch(int argc, char **argv, char **envp, int *prom_vec)
+@@ -272,7 +274,7 @@
for (i = 0; i < boot_mem_map.nr_map; i++) {
-@@ -377,6 +381,7 @@
+ unsigned long start, end;
+
+- if (boot_mem_map.map[i].type != BOOT_MEM_RAM)
++ if (boot_mem_map.map[i].type == BOOT_MEM_RESERVED)
+ continue;
+
+ start = PFN_UP(boot_mem_map.map[i].addr);
+@@ -320,7 +322,8 @@
+ #endif
+
+ /* Initialize the boot-time allocator with low memory only. */
+- bootmap_size = init_bootmem(first_usable_pfn, max_low_pfn);
++ bootmap_size = init_bootmem_node(NODE_DATA(0), first_usable_pfn,
++ PFN_UP(PHYS_OFFSET), max_low_pfn);
+
+ /*
+ * Register fully available low RAM pages with the bootmem allocator.
+@@ -371,11 +374,12 @@
+ continue;
+
+ /* Register lowmem ranges */
+- free_bootmem(PFN_PHYS(curr_pfn), PFN_PHYS(size));
++ free_bootmem_node(NODE_DATA(0), PFN_PHYS(curr_pfn),
++ size<<PAGE_SHIFT);
+ }
+
/* Reserve the bootmap memory. */
- reserve_bootmem(PFN_PHYS(first_usable_pfn), bootmap_size);
+- reserve_bootmem(PFN_PHYS(first_usable_pfn), bootmap_size);
++ reserve_bootmem_node(NODE_DATA(0), PFN_PHYS(first_usable_pfn), bootmap_size);
-+#endif
#ifdef CONFIG_BLK_DEV_INITRD
/* Board specific code should have set up initrd_start and initrd_end */
- ROOT_DEV = MKDEV(RAMDISK_MAJOR, 0);
-@@ -494,6 +499,7 @@
+@@ -409,6 +413,8 @@
+ code_resource.end = virt_to_bus(&_etext) - 1;
+ data_resource.start = virt_to_bus(&_fdata);
+ data_resource.end = virt_to_bus(&_edata) - 1;
++ bss_resource.start = virt_to_bus(&_fbss);
++ bss_resource.end = virt_to_bus(&_end) - 1;
+
+ /*
+ * Request address space for all standard RAM.
+@@ -448,6 +454,7 @@
+ */
+ request_resource(res, &code_resource);
+ request_resource(res, &data_resource);
++ request_resource(res, &bss_resource);
+ }
+ }
+
+@@ -494,6 +501,7 @@
void hp_setup(void);
void au1x00_setup(void);
void frame_info_init(void);
frame_info_init();
#if defined(CONFIG_BLK_DEV_FD) || defined(CONFIG_BLK_DEV_FD_MODULE)
-@@ -691,6 +697,11 @@
+@@ -691,6 +699,11 @@
pmc_yosemite_setup();
break;
#endif
default:
panic("Unsupported architecture");
}
-diff -urN linux.old/arch/mips/kernel/traps.c linux.dev/arch/mips/kernel/traps.c
---- linux.old/arch/mips/kernel/traps.c 2005-07-10 03:00:44.786181072 +0200
-+++ linux.dev/arch/mips/kernel/traps.c 2005-07-12 02:59:26.194668224 +0200
-@@ -40,6 +40,10 @@
- #include <asm/uaccess.h>
- #include <asm/mmu_context.h>
+diff -urN linux.old/arch/mips/kernel/time.c linux.dev/arch/mips/kernel/time.c
+--- linux.old/arch/mips/kernel/time.c 2005-01-19 15:09:29.000000000 +0100
++++ linux.dev/arch/mips/kernel/time.c 2005-11-10 01:12:43.950955750 +0100
+@@ -143,7 +143,6 @@
+ expirelo = (count / cycles_per_jiffy + 1) * cycles_per_jiffy;
+ write_c0_count(expirelo - cycles_per_jiffy);
+ write_c0_compare(expirelo);
+- write_c0_count(count);
+ }
-+#ifdef CONFIG_AR7
-+#include <asm/ar7/ar7.h>
-+#endif
-+
- extern asmlinkage void handle_mod(void);
- extern asmlinkage void handle_tlbl(void);
- extern asmlinkage void handle_tlbs(void);
-@@ -869,9 +873,15 @@
+ int (*mips_timer_state)(void);
+diff -urN linux.old/arch/mips/kernel/traps.c linux.dev/arch/mips/kernel/traps.c
+--- linux.old/arch/mips/kernel/traps.c 2005-10-21 16:43:16.400956750 +0200
++++ linux.dev/arch/mips/kernel/traps.c 2005-11-10 01:13:28.301727500 +0100
+@@ -869,9 +869,24 @@
exception_handlers[n] = handler;
if (n == 0 && cpu_has_divec) {
-+#ifdef CONFIG_AR7
-+ *(volatile u32 *)(AVALANCHE_VECS_KSEG0+0x200) = 0x08000000 |
-+ (0x03ffffff & (handler >> 2));
-+ flush_icache_range(AVALANCHE_VECS_KSEG0+0x200, AVALANCHE_VECS_KSEG0 + 0x204);
-+#else
++ printk(KERN_DEBUG "%s: using long jump via k0 to reach %08x\n",
++ __FUNCTION__, handler);
++ /* where does the 8 byte limit mentioned in head.S come from??? */
++ if (handler > 0x0fffffff) { /* maximum for single J instruction */
++ /* lui k0, 0x0000 */
++ *(volatile u32 *)(KSEG0+0x200) = 0x3c1a0000 | (handler >> 16);
++ /* ori k0, 0x0000 */
++ *(volatile u32 *)(KSEG0+0x204) = 0x375a0000 | (handler & 0xffff);
++ /* jr k0 */
++ *(volatile u32 *)(KSEG0+0x208) = 0x03400008;
++ /* nop */
++ *(volatile u32 *)(KSEG0+0x20C) = 0x00000000;
++ flush_icache_range(KSEG0+0x200, KSEG0+0x210);
++ } else {
*(volatile u32 *)(KSEG0+0x200) = 0x08000000 |
(0x03ffffff & (handler >> 2));
- flush_icache_range(KSEG0+0x200, KSEG0 + 0x204);
-+#endif
+- flush_icache_range(KSEG0+0x200, KSEG0 + 0x204);
++ flush_icache_range(KSEG0+0x200, KSEG0+0x204);
++ }
}
return (void *)old_handler;
}
-@@ -920,14 +930,46 @@
- void __init trap_init(void)
- {
- extern char except_vec1_generic;
-+ extern char except_vec2_generic;
- extern char except_vec3_generic, except_vec3_r4000;
- extern char except_vec_ejtag_debug;
- extern char except_vec4;
- unsigned long i;
-
-+#ifdef CONFIG_AR7
-+ extern char jump_tlb_miss, jump_tlb_miss_unused;
-+ extern char jump_cache_error,jump_general_exception;
-+ extern char jump_dedicated_interrupt;
-+ clear_c0_status(ST0_BEV);
-+#endif
-+
- /* Copy the generic exception handler code to it's final destination. */
- memcpy((void *)(KSEG0 + 0x80), &except_vec1_generic, 0x80);
-+ memcpy((void *)(KSEG0 + 0x100), &except_vec2_generic, 0x80);
-+ memcpy((void *)(KSEG0 + 0x180), &except_vec3_generic, 0x80);
-
-+ memcpy((void *)(KSEG0 + 0x0), &jump_tlb_miss, 0x80);
-+ memcpy((void *)(KSEG0 + 0x80), &jump_tlb_miss_unused, 0x80);
-+ memcpy((void *)(KSEG0 + 0x100), &jump_cache_error, 0x80);
-+ memcpy((void *)(KSEG0 + 0x180), &jump_general_exception, 0x80);
-+ memcpy((void *)(KSEG0 + 0x200), &jump_dedicated_interrupt, 0x80);
-+
-+#ifdef CONFIG_AR7
-+ memcpy((void *)(AVALANCHE_VECS_KSEG0 + 0x80), &except_vec1_generic, 0x80);
-+ memcpy((void *)(AVALANCHE_VECS_KSEG0 + 0x100), &except_vec2_generic, 0x80);
-+ memcpy((void *)(AVALANCHE_VECS_KSEG0 + 0x180), &except_vec3_generic, 0x80);
-+ flush_icache_range(AVALANCHE_VECS_KSEG0, AVALANCHE_VECS_KSEG0 + 0x200);
-+
-+ memcpy((void *)(KSEG0 + 0x0), &jump_tlb_miss, 0x80);
-+ memcpy((void *)(KSEG0 + 0x80), &jump_tlb_miss_unused, 0x80);
-+ memcpy((void *)(KSEG0 + 0x100), &jump_cache_error, 0x80);
-+ memcpy((void *)(KSEG0 + 0x180), &jump_general_exception, 0x80);
-+ memcpy((void *)(KSEG0 + 0x200), &jump_dedicated_interrupt, 0x80);
-+#else
-+ memcpy((void *)(KSEG0 + 0x80), &except_vec1_generic, 0x80);
-+#endif
-+ flush_icache_range(KSEG0 + 0x80, KSEG0 + 0x200);
-+
- /*
- * Setup default vectors
- */
-@@ -951,8 +993,12 @@
- * Some MIPS CPUs have a dedicated interrupt vector which reduces the
- * interrupt processing overhead. Use it where available.
- */
-+#ifdef CONFIG_AR7
-+ memcpy((void *)(AVALANCHE_VECS_KSEG0 + 0x200), &except_vec4, 8);
-+#else
- if (cpu_has_divec)
- memcpy((void *)(KSEG0 + 0x200), &except_vec4, 8);
-+#endif
-
- /*
- * Some CPUs can enable/disable for cache parity detection, but does
-@@ -991,12 +1037,17 @@
- if (cpu_has_mcheck)
- set_except_vector(24, handle_mcheck);
-
-+memcpy((void *)(KSEG0 + 0x180), &except_vec3_generic, 0x80);
-+#ifdef CONFIG_AR7
-+ memcpy((void *)(AVALANCHE_VECS_KSEG0 + 0x180), &except_vec3_generic, 0x80);
-+#else
- if (cpu_has_vce)
- memcpy((void *)(KSEG0 + 0x180), &except_vec3_r4000, 0x80);
- else if (cpu_has_4kex)
- memcpy((void *)(KSEG0 + 0x180), &except_vec3_generic, 0x80);
- else
- memcpy((void *)(KSEG0 + 0x080), &except_vec3_generic, 0x80);
-+#endif
-
- if (current_cpu_data.cputype == CPU_R6000 ||
- current_cpu_data.cputype == CPU_R6000A) {
-@@ -1023,7 +1074,11 @@
- if (board_nmi_handler_setup)
- board_nmi_handler_setup();
-
-+#ifdef CONFIG_AR7
-+ flush_icache_range(AVALANCHE_VECS_KSEG0, AVALANCHE_VECS_KSEG0 + 0x200);
-+#else
- flush_icache_range(KSEG0, KSEG0 + 0x400);
-+#endif
-
- per_cpu_trap_init();
- }
-diff -urN linux.old/arch/mips/lib/promlib.c linux.dev/arch/mips/lib/promlib.c
---- linux.old/arch/mips/lib/promlib.c 2005-07-10 03:00:44.786181072 +0200
-+++ linux.dev/arch/mips/lib/promlib.c 2005-07-12 02:59:26.195668072 +0200
-@@ -1,3 +1,4 @@
-+#ifndef CONFIG_AR7
- #include <stdarg.h>
- #include <linux/kernel.h>
-
-@@ -22,3 +23,4 @@
- }
- va_end(args);
- }
-+#endif
-diff -urN linux.old/arch/mips/Makefile linux.dev/arch/mips/Makefile
---- linux.old/arch/mips/Makefile 2005-07-10 03:00:44.786181072 +0200
-+++ linux.dev/arch/mips/Makefile 2005-07-12 02:59:26.195668072 +0200
-@@ -369,6 +369,16 @@
- endif
-
- #
-+# Texas Instruments AR7
-+#
-+
-+ifdef CONFIG_AR7
-+LIBS += arch/mips/ar7/ar7.o arch/mips/ar7/ar7/ar7.o
-+SUBDIRS += arch/mips/ar7 arch/mips/ar7/ar7
-+LOADADDR += 0x94020000
-+endif
-+
-+#
- # DECstation family
- #
- ifdef CONFIG_DECSTATION
diff -urN linux.old/arch/mips/mm/init.c linux.dev/arch/mips/mm/init.c
---- linux.old/arch/mips/mm/init.c 2005-07-10 03:00:44.787180920 +0200
-+++ linux.dev/arch/mips/mm/init.c 2005-07-12 02:59:26.195668072 +0200
-@@ -40,8 +40,10 @@
-
- mmu_gather_t mmu_gathers[NR_CPUS];
- unsigned long highstart_pfn, highend_pfn;
-+#ifndef CONFIG_AR7_PAGING
- static unsigned long totalram_pages;
- static unsigned long totalhigh_pages;
-+#endif
-
- void pgd_init(unsigned long page)
- {
-@@ -235,6 +237,7 @@
+--- linux.old/arch/mips/mm/init.c 2004-02-18 14:36:30.000000000 +0100
++++ linux.dev/arch/mips/mm/init.c 2005-11-10 01:14:16.376732000 +0100
+@@ -235,10 +235,13 @@
#endif
}
-+#ifndef CONFIG_AR7_PAGING
++#define START_PFN (NODE_DATA(0)->bdata->node_boot_start >> PAGE_SHIFT)
++#define MAX_LOW_PFN (NODE_DATA(0)->bdata->node_low_pfn)
++
void __init paging_init(void)
{
unsigned long zones_size[MAX_NR_ZONES] = {0, 0, 0};
-@@ -272,6 +275,7 @@
+- unsigned long max_dma, high, low;
++ unsigned long max_dma, high, low, start;
+
+ pagetable_init();
+
+@@ -247,7 +250,8 @@
+ #endif
- free_area_init(zones_size);
+ max_dma = virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT;
+- low = max_low_pfn;
++ start = START_PFN;
++ low = MAX_LOW_PFN - start;
+ high = highend_pfn;
+
+ #ifdef CONFIG_ISA
+@@ -270,7 +274,8 @@
+ zones_size[ZONE_HIGHMEM] = high - low;
+ #endif
+
+- free_area_init(zones_size);
++ free_area_init_node(0, NODE_DATA(0), 0, zones_size,
++ start << PAGE_SHIFT, 0);
}
-+#endif
#define PFN_UP(x) (((x) + PAGE_SIZE - 1) >> PAGE_SHIFT)
- #define PFN_DOWN(x) ((x) >> PAGE_SHIFT)
-@@ -298,6 +302,7 @@
- return 0;
- }
+@@ -283,7 +288,7 @@
+ for (i = 0; i < boot_mem_map.nr_map; i++) {
+ unsigned long addr, end;
-+#ifndef CONFIG_AR7_PAGING
- void __init mem_init(void)
- {
- unsigned long codesize, reservedpages, datasize, initsize;
-@@ -359,6 +364,7 @@
- initsize >> 10,
- (unsigned long) (totalhigh_pages << (PAGE_SHIFT-10)));
- }
-+#endif
+- if (boot_mem_map.map[i].type != BOOT_MEM_RAM)
++ if (boot_mem_map.map[i].type == BOOT_MEM_RESERVED)
+ /* not usable memory */
+ continue;
- #ifdef CONFIG_BLK_DEV_INITRD
- void free_initrd_mem(unsigned long start, unsigned long end)
-@@ -376,6 +382,7 @@
- }
+@@ -313,16 +318,17 @@
+ max_mapnr = num_physpages = highend_pfn;
+ num_mappedpages = max_low_pfn;
+ #else
+- max_mapnr = num_mappedpages = num_physpages = max_low_pfn;
++ max_mapnr = num_mappedpages = num_physpages = MAX_LOW_PFN - START_PFN;
+ #endif
+- high_memory = (void *) __va(max_low_pfn * PAGE_SIZE);
+-
+- totalram_pages += free_all_bootmem();
++
++ high_memory = (void *) __va(MAX_LOW_PFN * PAGE_SIZE);
++
++ totalram_pages += free_all_bootmem_node(NODE_DATA(0));
+ totalram_pages -= setup_zero_pages(); /* Setup zeroed pages. */
+
+ reservedpages = ram = 0;
+- for (tmp = 0; tmp < max_low_pfn; tmp++)
+- if (page_is_ram(tmp)) {
++ for (tmp = 0; tmp < max_mapnr; tmp++)
++ if (page_is_ram(START_PFN + tmp)) {
+ ram++;
+ if (PageReserved(mem_map+tmp))
+ reservedpages++;
+@@ -377,13 +383,13 @@
#endif
-+#ifndef CONFIG_AR7_PAGING
extern char __init_begin, __init_end;
- extern void prom_free_prom_memory(void) __init;
+-extern void prom_free_prom_memory(void) __init;
++extern unsigned long prom_free_prom_memory(void) __init;
-@@ -383,7 +390,9 @@
+ void free_initmem(void)
{
unsigned long addr;
-+#ifndef CONFIG_AR7
- prom_free_prom_memory ();
-+#endif
+- prom_free_prom_memory ();
++ totalram_pages += prom_free_prom_memory ();
addr = (unsigned long) &__init_begin;
while (addr < (unsigned long) &__init_end) {
-@@ -409,3 +418,4 @@
+diff -urN linux.old/drivers/char/Config.in linux.dev/drivers/char/Config.in
+--- linux.old/drivers/char/Config.in 2005-10-21 16:43:16.440959250 +0200
++++ linux.dev/drivers/char/Config.in 2005-11-10 01:10:45.843574500 +0100
+@@ -188,6 +188,14 @@
+ tristate 'Total Impact briQ front panel driver' CONFIG_BRIQ_PANEL
+ fi
- return;
- }
-+#endif
-diff -urN linux.old/arch/mips/mm/tlb-r4k.c linux.dev/arch/mips/mm/tlb-r4k.c
---- linux.old/arch/mips/mm/tlb-r4k.c 2005-07-10 03:00:44.787180920 +0200
-+++ linux.dev/arch/mips/mm/tlb-r4k.c 2005-07-12 02:59:26.196667920 +0200
-@@ -20,6 +20,10 @@
- #include <asm/pgtable.h>
- #include <asm/system.h>
++if [ "$CONFIG_AR7" = "y" ]; then
++ bool 'VLYNQ support for the TI SOC' CONFIG_AR7_VLYNQ
++ dep_bool 'VLYNQ clock source Internal' CONFIG_VLYNQ_CLK_LOCAL $CONFIG_AR7_VLYNQ
++
++ define_int CONFIG_AR7_VLYNQ_PORTS 2
++ tristate 'ADAM2 environment support (read-only)' CONFIG_AR7_ADAM2
++fi
++
+ source drivers/i2c/Config.in
-+#ifdef CONFIG_AR7
-+#include <asm/ar7/ar7.h>
-+#endif
+ mainmenu_option next_comment
+diff -urN linux.old/drivers/char/Config.in.orig linux.dev/drivers/char/Config.in.orig
+--- linux.old/drivers/char/Config.in.orig 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/char/Config.in.orig 2005-11-10 01:10:45.863575750 +0100
+@@ -0,0 +1,414 @@
++#
++# Character device configuration
++#
++mainmenu_option next_comment
++comment 'Character devices'
++
++bool 'Virtual terminal' CONFIG_VT
++if [ "$CONFIG_VT" = "y" ]; then
++ bool ' Support for console on virtual terminal' CONFIG_VT_CONSOLE
++ if [ "$CONFIG_GSC_LASI" = "y" ]; then
++ bool ' Support for Lasi/Dino PS2 port' CONFIG_GSC_PS2
++ fi
++fi
++tristate 'Standard/generic (8250/16550 and compatible UARTs) serial support' CONFIG_SERIAL
++if [ "$CONFIG_SERIAL" = "y" ]; then
++ bool ' Support for console on serial port' CONFIG_SERIAL_CONSOLE
++ if [ "$CONFIG_GSC_LASI" = "y" ]; then
++ bool ' serial port on GSC support' CONFIG_SERIAL_GSC
++ fi
++ if [ "$CONFIG_IA64" = "y" ]; then
++ bool ' Support for serial port described by EFI HCDP table' CONFIG_SERIAL_HCDP
++ fi
++ if [ "$CONFIG_ARCH_ACORN" = "y" ]; then
++ tristate ' Atomwide serial port support' CONFIG_ATOMWIDE_SERIAL
++ tristate ' Dual serial port support' CONFIG_DUALSP_SERIAL
++ fi
++fi
++dep_mbool 'Extended dumb serial driver options' CONFIG_SERIAL_EXTENDED $CONFIG_SERIAL
++if [ "$CONFIG_SERIAL_EXTENDED" = "y" ]; then
++ bool ' Support more than 4 serial ports' CONFIG_SERIAL_MANY_PORTS
++ bool ' Support for sharing serial interrupts' CONFIG_SERIAL_SHARE_IRQ
++ bool ' Autodetect IRQ on standard ports (unsafe)' CONFIG_SERIAL_DETECT_IRQ
++ bool ' Support special multiport boards' CONFIG_SERIAL_MULTIPORT
++ bool ' Support the Bell Technologies HUB6 card' CONFIG_HUB6
++fi
++bool 'Non-standard serial port support' CONFIG_SERIAL_NONSTANDARD
++if [ "$CONFIG_SERIAL_NONSTANDARD" = "y" ]; then
++ tristate ' Computone IntelliPort Plus serial support' CONFIG_COMPUTONE
++ tristate ' Comtrol Rocketport support' CONFIG_ROCKETPORT
++ tristate ' Cyclades async mux support' CONFIG_CYCLADES
++ if [ "$CONFIG_EXPERIMENTAL" = "y" -a "$CONFIG_CYCLADES" != "n" ]; then
++ bool ' Cyclades-Z interrupt mode operation (EXPERIMENTAL)' CONFIG_CYZ_INTR
++ fi
++ if [ "$CONFIG_X86_64" != "y" ]; then
++ tristate ' Digiboard Intelligent Async Support' CONFIG_DIGIEPCA
++ if [ "$CONFIG_DIGIEPCA" = "n" ]; then
++ tristate ' Digiboard PC/Xx Support' CONFIG_DIGI
++ fi
++ fi
++ dep_tristate ' Hayes ESP serial port support' CONFIG_ESPSERIAL $CONFIG_ISA
++ tristate ' Moxa Intellio support' CONFIG_MOXA_INTELLIO
++ tristate ' Moxa SmartIO support' CONFIG_MOXA_SMARTIO
++ if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
++ dep_tristate ' Multi-Tech multiport card support (EXPERIMENTAL)' CONFIG_ISI m
++ fi
++ tristate ' Microgate SyncLink card support' CONFIG_SYNCLINK
++ tristate ' SyncLink Multiport support' CONFIG_SYNCLINKMP
++ tristate ' HDLC line discipline support' CONFIG_N_HDLC
++ tristate ' SDL RISCom/8 card support' CONFIG_RISCOM8
++ if [ "$CONFIG_X86_64" != "y" ]; then
++ tristate ' Specialix IO8+ card support' CONFIG_SPECIALIX
++ if [ "$CONFIG_SPECIALIX" != "n" ]; then
++ bool ' Specialix DTR/RTS pin is RTS' CONFIG_SPECIALIX_RTSCTS
++ fi
++ tristate ' Specialix SX (and SI) card support' CONFIG_SX
++ tristate ' Specialix RIO system support' CONFIG_RIO
++ if [ "$CONFIG_RIO" != "n" ]; then
++ bool ' Support really old RIO/PCI cards' CONFIG_RIO_OLDPCI
++ fi
++ fi
++ bool ' Stallion multiport serial support' CONFIG_STALDRV
++ if [ "$CONFIG_STALDRV" = "y" ]; then
++ tristate ' Stallion EasyIO or EC8/32 support' CONFIG_STALLION
++ tristate ' Stallion EC8/64, ONboard, Brumby support' CONFIG_ISTALLION
++ fi
++ if [ "$CONFIG_PARISC" = "y" ]; then
++ if [ "$CONFIG_PDC_CONSOLE" != "y" ]; then
++ bool ' Serial MUX support' CONFIG_SERIAL_MUX CONFIG_SERIAL_NONSTANDARD
++ fi
++ if [ "$CONFIG_SERIAL_MUX" != "y" ]; then
++ bool ' PDC software console support' CONFIG_PDC_CONSOLE CONFIG_SERIAL_NONSTANDARD
++ fi
++ fi
++ if [ "$CONFIG_MIPS" = "y" ]; then
++ bool ' TX3912/PR31700 serial port support' CONFIG_SERIAL_TX3912
++ dep_bool ' Console on TX3912/PR31700 serial port' CONFIG_SERIAL_TX3912_CONSOLE $CONFIG_SERIAL_TX3912
++ bool ' TMPTX39XX/49XX serial port support' CONFIG_SERIAL_TXX9
++ dep_bool ' Console on TMPTX39XX/49XX serial port' CONFIG_SERIAL_TXX9_CONSOLE $CONFIG_SERIAL_TXX9
++ if [ "$CONFIG_SOC_AU1X00" = "y" ]; then
++ bool ' Enable Au1x00 UART Support' CONFIG_AU1X00_UART
++ if [ "$CONFIG_AU1X00_UART" = "y" ]; then
++ bool ' Enable Au1x00 serial console' CONFIG_AU1X00_SERIAL_CONSOLE
++ fi
++ dep_tristate ' Au1x00 USB TTY Device support' CONFIG_AU1X00_USB_TTY $CONFIG_SOC_AU1X00
++ if [ "$CONFIG_AU1000_USB_TTY" != "y" ]; then
++ dep_tristate ' Au1x00 USB Raw Device support' CONFIG_AU1X00_USB_RAW $CONFIG_SOC_AU1X00
++ fi
++ if [ "$CONFIG_AU1X00_USB_TTY" != "n" -o \
++ "$CONFIG_AU1X00_USB_RAW" != "n" ]; then
++ define_bool CONFIG_AU1X00_USB_DEVICE y
++ fi
++ fi
++ bool ' TXx927 SIO support' CONFIG_TXX927_SERIAL
++ if [ "$CONFIG_TXX927_SERIAL" = "y" ]; then
++ bool ' TXx927 SIO Console support' CONFIG_TXX927_SERIAL_CONSOLE
++ fi
++ if [ "$CONFIG_SIBYTE_SB1xxx_SOC" = "y" ]; then
++ bool ' Support for BCM1xxx onchip DUART' CONFIG_SIBYTE_SB1250_DUART
++ if [ "$CONFIG_SIBYTE_SB1250_DUART" = "y" ]; then
++ bool ' Console on BCM1xxx DUART' CONFIG_SIBYTE_SB1250_DUART_CONSOLE
++ if [ "$CONFIG_SIBYTE_SB1250_DUART_CONSOLE" = "y" ]; then
++ define_bool CONFIG_SERIAL_CONSOLE y
++ fi
++ fi
++ fi
++ fi
++ if [ "$CONFIG_DECSTATION" = "y" ]; then
++ bool ' DECstation serial support' CONFIG_SERIAL_DEC
++ dep_bool ' Support for console on a DECstation serial port' CONFIG_SERIAL_DEC_CONSOLE $CONFIG_SERIAL_DEC
++ dep_bool ' DZ11 serial support' CONFIG_DZ $CONFIG_SERIAL_DEC $CONFIG_MIPS32
++ dep_bool ' Z85C30 serial support' CONFIG_ZS $CONFIG_SERIAL_DEC $CONFIG_TC
++ fi
++ if [ "$CONFIG_SGI_IP22" = "y" ]; then
++ bool ' SGI Zilog85C30 serial support' CONFIG_IP22_SERIAL
++ fi
++ if [ "$CONFIG_IA64" = "y" ]; then
++ bool ' SGI SN2 l1 serial port support' CONFIG_SGI_L1_SERIAL
++ if [ "$CONFIG_SGI_L1_SERIAL" = "y" ]; then
++ bool ' SGI SN2 l1 Console support' CONFIG_SGI_L1_SERIAL_CONSOLE
++ fi
++ if [ "$CONFIG_IA64_GENERIC" = "y" -o "$CONFIG_IA64_SGI_SN2" = "y" ]; then
++ bool ' SGI SN2 IOC4 serial port support' CONFIG_SGI_IOC4_SERIAL
++ fi
++ fi
++fi
++if [ "$CONFIG_EXPERIMENTAL" = "y" -a "$CONFIG_ZORRO" = "y" ]; then
++ tristate 'Commodore A2232 serial support (EXPERIMENTAL)' CONFIG_A2232
++fi
++if [ "$CONFIG_FOOTBRIDGE" = "y" ]; then
++ bool 'DC21285 serial port support' CONFIG_SERIAL_21285
++ if [ "$CONFIG_SERIAL_21285" = "y" ]; then
++ if [ "$CONFIG_OBSOLETE" = "y" ]; then
++ bool ' Use /dev/ttyS0 device (OBSOLETE)' CONFIG_SERIAL_21285_OLD
++ fi
++ bool ' Console on DC21285 serial port' CONFIG_SERIAL_21285_CONSOLE
++ fi
++ if [ "$CONFIG_PARISC" = "y" ]; then
++ bool ' PDC software console support' CONFIG_PDC_CONSOLE
++ fi
++fi
++if [ "$CONFIG_MIPS_ITE8172" = "y" ]; then
++ bool 'Enable Qtronix 990P Keyboard Support' CONFIG_QTRONIX_KEYBOARD
++ if [ "$CONFIG_QTRONIX_KEYBOARD" = "y" ]; then
++ define_bool CONFIG_IT8172_CIR y
++ else
++ bool ' Enable PS2 Keyboard Support' CONFIG_PC_KEYB
++ fi
++ bool 'Enable Smart Card Reader 0 Support ' CONFIG_IT8172_SCR0
++ bool 'Enable Smart Card Reader 1 Support ' CONFIG_IT8172_SCR1
++fi
++if [ "$CONFIG_MIPS_IVR" = "y" ]; then
++ bool 'Enable Qtronix 990P Keyboard Support' CONFIG_QTRONIX_KEYBOARD
++ if [ "$CONFIG_QTRONIX_KEYBOARD" = "y" ]; then
++ define_bool CONFIG_IT8172_CIR y
++ fi
++ bool 'Enable Smart Card Reader 0 Support ' CONFIG_IT8172_SCR0
++fi
++if [ "$CONFIG_CPU_VR41XX" = "y" ]; then
++ bool 'NEC VR4100 series Keyboard Interface Unit Support ' CONFIG_VR41XX_KIU
++fi
++bool 'Unix98 PTY support' CONFIG_UNIX98_PTYS
++if [ "$CONFIG_UNIX98_PTYS" = "y" ]; then
++ int 'Maximum number of Unix98 PTYs in use (0-2048)' CONFIG_UNIX98_PTY_COUNT 256
++fi
++if [ "$CONFIG_PARPORT" != "n" ]; then
++ dep_tristate 'Parallel printer support' CONFIG_PRINTER $CONFIG_PARPORT
++ if [ "$CONFIG_PRINTER" != "n" ]; then
++ bool ' Support for console on line printer' CONFIG_LP_CONSOLE
++ fi
++ dep_tristate 'Support for user-space parallel port device drivers' CONFIG_PPDEV $CONFIG_PARPORT
++ dep_tristate 'Texas Instruments parallel link cable support' CONFIG_TIPAR $CONFIG_PARPORT
++fi
+
- extern char except_vec0_nevada, except_vec0_r4000, except_vec0_r4600;
-
- /* CP0 hazard avoidance. */
-@@ -375,7 +379,12 @@
- else if (current_cpu_data.cputype == CPU_R4600)
- memcpy((void *)KSEG0, &except_vec0_r4600, 0x80);
- else
-+#ifdef CONFIG_AR7
-+ memcpy((void *)AVALANCHE_VECS_KSEG0, &except_vec0_r4000, 0x80);
-+ flush_icache_range(AVALANCHE_VECS_KSEG0, AVALANCHE_VECS_KSEG0 + 0x80);
-+#else
- memcpy((void *)KSEG0, &except_vec0_r4000, 0x80);
- flush_icache_range(KSEG0, KSEG0 + 0x80);
-+#endif
- }
- }
-diff -urN linux.old/drivers/char/serial.c linux.dev/drivers/char/serial.c
---- linux.old/drivers/char/serial.c 2005-07-10 03:00:44.789180616 +0200
-+++ linux.dev/drivers/char/serial.c 2005-07-12 02:59:26.198667616 +0200
-@@ -419,7 +419,40 @@
- return 0;
- }
-
--#if defined(CONFIG_MIPS_ATLAS) || defined(CONFIG_MIPS_SEAD)
-+#if defined(CONFIG_AR7)
++if [ "$CONFIG_PPC64" = "y" ] ; then
++ bool 'pSeries Hypervisor Virtual Console support' CONFIG_HVC_CONSOLE
++fi
++if [ "$CONFIG_ALL_PPC" = "y" ]; then
++ tristate 'Total Impact briQ front panel driver' CONFIG_BRIQ_PANEL
++fi
+
-+static _INLINE_ unsigned int serial_in(struct async_struct *info, int offset)
-+{
-+ return (inb(info->port + (offset * 4)) & 0xff);
-+}
++if [ "$CONFIG_AR7" = "y" ]; then
++ bool 'VLYNQ support for the TI SOC' CONFIG_AR7_VLYNQ
++ dep_bool 'VLYNQ clock source Internal' CONFIG_VLYNQ_CLK_LOCAL $CONFIG_AR7_VLYNQ
++
++ define_int CONFIG_AR7_VLYNQ_PORTS 2
++fi
++
++source drivers/i2c/Config.in
++
++mainmenu_option next_comment
++comment 'Mice'
++tristate 'Bus Mouse Support' CONFIG_BUSMOUSE
++if [ "$CONFIG_BUSMOUSE" != "n" ]; then
++ dep_tristate ' ATIXL busmouse support' CONFIG_ATIXL_BUSMOUSE $CONFIG_BUSMOUSE
++ dep_tristate ' Logitech busmouse support' CONFIG_LOGIBUSMOUSE $CONFIG_BUSMOUSE
++ dep_tristate ' Microsoft busmouse support' CONFIG_MS_BUSMOUSE $CONFIG_BUSMOUSE
++ if [ "$CONFIG_ADB" = "y" -a "$CONFIG_ADB_KEYBOARD" = "y" ]; then
++ dep_tristate ' Apple Desktop Bus mouse support (old driver)' CONFIG_ADBMOUSE $CONFIG_BUSMOUSE
++ fi
++# if [ "$CONFIG_DECSTATION" = "y" ]; then
++# dep_bool ' MAXINE Access.Bus mouse (VSXXX-BB/GB) support' CONFIG_DTOP_MOUSE $CONFIG_ACCESSBUS
++# fi
++fi
+
++tristate 'Mouse Support (not serial and bus mice)' CONFIG_MOUSE
++if [ "$CONFIG_MOUSE" != "n" ]; then
++ bool ' PS/2 mouse (aka "auxiliary device") support' CONFIG_PSMOUSE
++ tristate ' C&T 82C710 mouse port support (as on TI Travelmate)' CONFIG_82C710_MOUSE
++ tristate ' PC110 digitizer pad support' CONFIG_PC110_PAD
++ tristate ' MK712 touch screen support' CONFIG_MK712_MOUSE
++fi
++endmenu
++
++source drivers/char/joystick/Config.in
++
++tristate 'QIC-02 tape support' CONFIG_QIC02_TAPE
++if [ "$CONFIG_QIC02_TAPE" != "n" ]; then
++ bool ' Do you want runtime configuration for QIC-02' CONFIG_QIC02_DYNCONF
++ if [ "$CONFIG_QIC02_DYNCONF" != "y" ]; then
++ comment ' Edit configuration parameters in ./include/linux/tpqic02.h!'
++ else
++ comment ' Setting runtime QIC-02 configuration is done with qic02conf'
++ comment ' from the tpqic02-support package. It is available at'
++ comment ' metalab.unc.edu or ftp://titus.cfw.com/pub/Linux/util/'
++ fi
++fi
+
-+static _INLINE_ unsigned int serial_inp(struct async_struct *info, int offset)
-+{
-+#ifdef CONFIG_SERIAL_NOPAUSE_IO
-+ return (inb(info->port + (offset * 4)) & 0xff);
-+#else
-+ return (inb_p(info->port + (offset * 4)) & 0xff);
-+#endif
-+}
++tristate 'IPMI top-level message handler' CONFIG_IPMI_HANDLER
++dep_mbool ' Generate a panic event to all BMCs on a panic' CONFIG_IPMI_PANIC_EVENT $CONFIG_IPMI_HANDLER
++dep_tristate ' Device interface for IPMI' CONFIG_IPMI_DEVICE_INTERFACE $CONFIG_IPMI_HANDLER
++dep_tristate ' IPMI KCS handler' CONFIG_IPMI_KCS $CONFIG_IPMI_HANDLER
++dep_tristate ' IPMI Watchdog Timer' CONFIG_IPMI_WATCHDOG $CONFIG_IPMI_HANDLER
++
++mainmenu_option next_comment
++comment 'Watchdog Cards'
++bool 'Watchdog Timer Support' CONFIG_WATCHDOG
++if [ "$CONFIG_WATCHDOG" != "n" ]; then
++ bool ' Disable watchdog shutdown on close' CONFIG_WATCHDOG_NOWAYOUT
++ tristate ' Acquire SBC Watchdog Timer' CONFIG_ACQUIRE_WDT
++ tristate ' Advantech SBC Watchdog Timer' CONFIG_ADVANTECH_WDT
++ tristate ' ALi M7101 PMU on ALi 1535D+ Watchdog Timer' CONFIG_ALIM1535_WDT
++ tristate ' ALi M7101 PMU Watchdog Timer' CONFIG_ALIM7101_WDT
++ tristate ' AMD "Elan" SC520 Watchdog Timer' CONFIG_SC520_WDT
++ tristate ' Berkshire Products PC Watchdog' CONFIG_PCWATCHDOG
++ if [ "$CONFIG_FOOTBRIDGE" = "y" ]; then
++ tristate ' DC21285 watchdog' CONFIG_21285_WATCHDOG
++ if [ "$CONFIG_ARCH_NETWINDER" = "y" ]; then
++ tristate ' NetWinder WB83C977 watchdog' CONFIG_977_WATCHDOG
++ fi
++ fi
++ tristate ' Eurotech CPU-1220/1410 Watchdog Timer' CONFIG_EUROTECH_WDT
++ tristate ' IB700 SBC Watchdog Timer' CONFIG_IB700_WDT
++ tristate ' ICP ELectronics Wafer 5823 Watchdog' CONFIG_WAFER_WDT
++ tristate ' Intel i810 TCO timer / Watchdog' CONFIG_I810_TCO
++ tristate ' Mixcom Watchdog' CONFIG_MIXCOMWD
++ tristate ' SBC-60XX Watchdog Timer' CONFIG_60XX_WDT
++ dep_tristate ' SC1200 Watchdog Timer (EXPERIMENTAL)' CONFIG_SC1200_WDT $CONFIG_EXPERIMENTAL
++ tristate ' NatSemi SCx200 Watchdog' CONFIG_SCx200_WDT
++ tristate ' Software Watchdog' CONFIG_SOFT_WATCHDOG
++ tristate ' W83877F (EMACS) Watchdog Timer' CONFIG_W83877F_WDT
++ tristate ' WDT Watchdog timer' CONFIG_WDT
++ tristate ' WDT PCI Watchdog timer' CONFIG_WDTPCI
++ if [ "$CONFIG_WDT" != "n" ]; then
++ bool ' WDT501 features' CONFIG_WDT_501
++ if [ "$CONFIG_WDT_501" = "y" ]; then
++ bool ' Fan Tachometer' CONFIG_WDT_501_FAN
++ fi
++ fi
++ tristate ' ZF MachZ Watchdog' CONFIG_MACHZ_WDT
++ if [ "$CONFIG_SGI_IP22" = "y" ]; then
++ dep_tristate ' Indy/I2 Hardware Watchdog' CONFIG_INDYDOG $CONFIG_SGI_IP22
++ fi
++ if [ "$CONFIG_8xx" = "y" ]; then
++ tristate ' MPC8xx Watchdog Timer' CONFIG_8xx_WDT
++ fi
++fi
++endmenu
++
++if [ "$CONFIG_ARCH_NETWINDER" = "y" ]; then
++ tristate 'NetWinder thermometer support' CONFIG_DS1620
++ tristate 'NetWinder Button' CONFIG_NWBUTTON
++ if [ "$CONFIG_NWBUTTON" != "n" ]; then
++ bool ' Reboot Using Button' CONFIG_NWBUTTON_REBOOT
++ fi
++ tristate 'NetWinder flash support' CONFIG_NWFLASH
++fi
++tristate 'NatSemi SCx200 Support' CONFIG_SCx200
++dep_tristate ' NatSemi SCx200 GPIO Support' CONFIG_SCx200_GPIO $CONFIG_SCx200
+
-+static _INLINE_ void serial_out(struct async_struct *info, int offset, int value)
-+{
-+ outb(value, info->port + (offset * 4));
-+}
++if [ "$CONFIG_IA64_GENERIC" = "y" -o "$CONFIG_IA64_SGI_SN2" = "y" ] ; then
++ bool 'SGI SN2 fetchop support' CONFIG_FETCHOP
++fi
+
++if [ "$CONFIG_X86" = "y" -o "$CONFIG_X86_64" = "y" ]; then
++ dep_tristate 'AMD 768/8111 Random Number Generator support' CONFIG_AMD_RNG $CONFIG_PCI
++fi
++if [ "$CONFIG_X86" = "y" -o "$CONFIG_IA64" = "y" ]; then
++ dep_tristate 'Intel i8x0 Random Number Generator support' CONFIG_INTEL_RNG $CONFIG_PCI
++fi
++if [ "$CONFIG_X86" = "y" -o "$CONFIG_IA64" = "y" -o \
++ "$CONFIG_X86_64" = "y" ]; then
++ dep_tristate 'Intel/AMD/VIA HW Random Number Generator support' CONFIG_HW_RANDOM $CONFIG_PCI
++fi
++dep_tristate 'AMD 76x native power management (Experimental)' CONFIG_AMD_PM768 $CONFIG_PCI
++tristate '/dev/nvram support' CONFIG_NVRAM
++tristate 'Enhanced Real Time Clock Support' CONFIG_RTC
++if [ "$CONFIG_IA64" = "y" ]; then
++ bool 'EFI Real Time Clock Services' CONFIG_EFI_RTC
++fi
++if [ "$CONFIG_OBSOLETE" = "y" -a "$CONFIG_ALPHA_BOOK1" = "y" ]; then
++ bool 'Tadpole ANA H8 Support (OBSOLETE)' CONFIG_H8
++fi
++if [ "$CONFIG_SGI_IP22" = "y" ]; then
++ tristate 'Dallas DS1286 RTC support' CONFIG_DS1286
++fi
++if [ "$CONFIG_SGI_IP27" = "y" ]; then
++ tristate 'SGI M48T35 RTC support' CONFIG_SGI_IP27_RTC
++fi
++if [ "$CONFIG_TOSHIBA_RBTX4927" = "y" -o "$CONFIG_TOSHIBA_JMR3927" = "y" ]; then
++ tristate 'Dallas DS1742 RTC support' CONFIG_DS1742
++fi
+
-+static _INLINE_ void serial_outp(struct async_struct *info, int offset,
-+ int value)
-+{
-+#ifdef CONFIG_SERIAL_NOPAUSE_IO
-+ outb(value, info->port + (offset * 4));
-+#else
-+ outb_p(value, info->port + (offset * 4));
-+#endif
-+}
++tristate 'Double Talk PC internal speech card support' CONFIG_DTLK
++tristate 'Siemens R3964 line discipline' CONFIG_R3964
++tristate 'Applicom intelligent fieldbus card support' CONFIG_APPLICOM
++if [ "$CONFIG_EXPERIMENTAL" = "y" -a "$CONFIG_X86" = "y" -a "$CONFIG_X86_64" != "y" ]; then
++ dep_tristate 'Sony Vaio Programmable I/O Control Device support (EXPERIMENTAL)' CONFIG_SONYPI $CONFIG_PCI
++fi
+
-+#elif defined(CONFIG_MIPS_ATLAS) || defined(CONFIG_MIPS_SEAD)
-
- #include <asm/mips-boards/atlas.h>
++mainmenu_option next_comment
++comment 'Ftape, the floppy tape device driver'
++tristate 'Ftape (QIC-80/Travan) support' CONFIG_FTAPE
++if [ "$CONFIG_FTAPE" != "n" ]; then
++ source drivers/char/ftape/Config.in
++fi
++
++endmenu
++
++if [ "$CONFIG_GART_IOMMU" = "y" ]; then
++ bool '/dev/agpgart (AGP Support)' CONFIG_AGP
++ define_bool CONFIG_AGP_AMD_K8 y
++else
++ tristate '/dev/agpgart (AGP Support)' CONFIG_AGP
++fi
++if [ "$CONFIG_AGP" != "n" ]; then
++ bool ' Intel 440LX/BX/GX and I815/I820/I830M/I830MP/I840/I845/I850/I860 support' CONFIG_AGP_INTEL
++ bool ' Intel I810/I815/I830M (on-board) support' CONFIG_AGP_I810
++ bool ' VIA chipset support' CONFIG_AGP_VIA
++ bool ' AMD Irongate, 761, and 762 support' CONFIG_AGP_AMD
++ if [ "$CONFIG_GART_IOMMU" != "y" ]; then
++ bool ' AMD Opteron/Athlon64 on-CPU GART support' CONFIG_AGP_AMD_K8
++ fi
++ bool ' Generic SiS support' CONFIG_AGP_SIS
++ bool ' ALI chipset support' CONFIG_AGP_ALI
++ bool ' Serverworks LE/HE support' CONFIG_AGP_SWORKS
++ if [ "$CONFIG_X86" = "y" ]; then
++ bool ' NVIDIA chipset support' CONFIG_AGP_NVIDIA
++ fi
++ if [ "$CONFIG_IA64" = "y" ]; then
++ bool ' Intel 460GX support' CONFIG_AGP_I460
++ bool ' HP ZX1 AGP support' CONFIG_AGP_HP_ZX1
++ fi
++ bool ' ATI IGP chipset support' CONFIG_AGP_ATI
++fi
++
++mainmenu_option next_comment
++comment 'Direct Rendering Manager (XFree86 DRI support)'
++bool 'Direct Rendering Manager (XFree86 DRI support)' CONFIG_DRM
++if [ "$CONFIG_DRM" = "y" ]; then
++ bool ' Build drivers for old (XFree 4.0) DRM' CONFIG_DRM_OLD
++ if [ "$CONFIG_DRM_OLD" = "y" ]; then
++ comment 'DRM 4.0 drivers'
++ source drivers/char/drm-4.0/Config.in
++ else
++ comment 'DRM 4.1 drivers'
++ define_bool CONFIG_DRM_NEW y
++ source drivers/char/drm/Config.in
++ fi
++fi
++
++if [ "$CONFIG_X86" = "y" ]; then
++ tristate 'ACP Modem (Mwave) support' CONFIG_MWAVE
++fi
++
++endmenu
++
++if [ "$CONFIG_HOTPLUG" = "y" -a "$CONFIG_PCMCIA" != "n" ]; then
++ source drivers/char/pcmcia/Config.in
++fi
++if [ "$CONFIG_SOC_AU1X00" = "y" ]; then
++ tristate ' Alchemy Au1x00 GPIO device support' CONFIG_AU1X00_GPIO
++ tristate ' Au1000/ADS7846 touchscreen support' CONFIG_TS_AU1X00_ADS7846
++ #tristate ' Alchemy Au1550 PSC SPI support' CONFIG_AU1550_PSC_SPI
++fi
++if [ "$CONFIG_MIPS_ITE8172" = "y" ]; then
++ tristate ' ITE GPIO' CONFIG_ITE_GPIO
++fi
++
++if [ "$CONFIG_X86" = "y" ]; then
++ tristate 'ACP Modem (Mwave) support' CONFIG_MWAVE
++ dep_tristate 'HP OB600 C/CT Pop-up mouse support' CONFIG_OBMOUSE $CONFIG_INPUT_MOUSEDEV
++fi
++
++endmenu
+diff -urN linux.old/drivers/char/Makefile linux.dev/drivers/char/Makefile
+--- linux.old/drivers/char/Makefile 2005-10-21 16:43:16.460960500 +0200
++++ linux.dev/drivers/char/Makefile 2005-11-10 01:10:45.871576250 +0100
+@@ -240,6 +240,13 @@
+ obj-y += joystick/js.o
+ endif
-@@ -478,8 +511,10 @@
- * needed for certain old 386 machines, I've left these #define's
- * in....
- */
-+#ifndef CONFIG_AR7
- #define serial_inp(info, offset) serial_in(info, offset)
- #define serial_outp(info, offset, value) serial_out(info, offset, value)
-+#endif
++#
++# Texas Intruments VLYNQ driver
++#
++
++subdir-$(CONFIG_AR7_VLYNQ) += avalanche_vlynq
++obj-$(CONFIG_AR7_VLYNQ) += avalanche_vlynq/avalanche_vlynq.o
++
+ obj-$(CONFIG_FETCHOP) += fetchop.o
+ obj-$(CONFIG_BUSMOUSE) += busmouse.o
+ obj-$(CONFIG_DTLK) += dtlk.o
+@@ -340,6 +347,11 @@
+ obj-y += ipmi/ipmi.o
+ endif
++subdir-$(CONFIG_AR7_ADAM2) += ticfg
++ifeq ($(CONFIG_AR7_ADAM2),y)
++ obj-y += ticfg/ticfg.o
++endif
++
+ include $(TOPDIR)/Rules.make
- /*
-@@ -1728,7 +1763,16 @@
- /* Special case since 134 is really 134.5 */
- quot = (2*baud_base / 269);
- else if (baud)
-+#ifdef CONFIG_AR7
-+ quot = (CONFIG_AR7_SYS_FREQUENCY*500000) / baud;
-+ //quot = get_avalanche_vbus_freq() / baud;
+ fastdep:
+diff -urN linux.old/drivers/char/Makefile.orig linux.dev/drivers/char/Makefile.orig
+--- linux.old/drivers/char/Makefile.orig 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/char/Makefile.orig 2005-11-10 01:10:45.871576250 +0100
+@@ -0,0 +1,374 @@
++#
++# Makefile for the kernel character device drivers.
++#
++# Note! Dependencies are done automagically by 'make dep', which also
++# removes any old dependencies. DON'T put your own dependencies here
++# unless it's something special (ie not a .c file).
++#
++# Note 2! The CFLAGS definitions are now inherited from the
++# parent makes..
++#
+
-+ if ((quot%16)>7)
-+ quot += 8;
-+ quot /=16;
-+#else
- quot = baud_base / baud;
-+#endif
- }
- /* If the quotient is zero refuse the change */
- if (!quot && old_termios) {
-@@ -5552,8 +5596,10 @@
- state->irq = irq_cannonicalize(state->irq);
- if (state->hub6)
- state->io_type = SERIAL_IO_HUB6;
-+#ifndef CONFIG_AR7
- if (state->port && check_region(state->port,8))
- continue;
-+#endif
- #ifdef CONFIG_MCA
- if ((state->flags & ASYNC_BOOT_ONLYMCA) && !MCA_bus)
- continue;
-@@ -6009,7 +6055,16 @@
- info->io_type = state->io_type;
- info->iomem_base = state->iomem_base;
- info->iomem_reg_shift = state->iomem_reg_shift;
-+#ifdef CONFIG_AR7
-+ //quot = get_avalanche_vbus_freq() / baud;
-+ quot = (CONFIG_AR7_SYS_FREQUENCY*500000) / baud;
++#
++# This file contains the font map for the default (hardware) font
++#
++FONTMAPFILE = cp437.uni
+
-+ if ((quot%16)>7)
-+ quot += 8;
-+ quot /=16;
-+#else
- quot = state->baud_base / baud;
-+#endif
- cval = cflag & (CSIZE | CSTOPB);
- #if defined(__powerpc__) || defined(__alpha__)
- cval >>= 8;
-diff -urN linux.old/include/asm-mips/ar7/ar7.h linux.dev/include/asm-mips/ar7/ar7.h
---- linux.old/include/asm-mips/ar7/ar7.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/include/asm-mips/ar7/ar7.h 2005-07-12 02:59:26.199667464 +0200
-@@ -0,0 +1,33 @@
-+/*
-+ * $Id$
-+ * Copyright (C) $Date$ $Author$
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-+ *
-+ */
++O_TARGET := char.o
+
-+#ifndef _AR7_H
-+#define _AR7_H
++obj-y += mem.o tty_io.o n_tty.o tty_ioctl.o raw.o pty.o misc.o random.o
+
-+#include <asm/addrspace.h>
-+#include <linux/config.h>
++# All of the (potential) objects that export symbols.
++# This list comes from 'grep -l EXPORT_SYMBOL *.[hc]'.
+
-+#define AVALANCHE_VECS_KSEG0 (KSEG0ADDR(CONFIG_AR7_MEMORY))
++export-objs := busmouse.o console.o keyboard.o sysrq.o \
++ misc.o pty.o random.o selection.o serial.o \
++ sonypi.o tty_io.o tty_ioctl.o generic_serial.o \
++ au1000_gpio.o vac-serial.o hp_psaux.o nvram.o \
++ scx200.o fetchop.o
+
-+#define AR7_UART0_REGS_BASE (KSEG1ADDR(0x08610E00))
-+#define AR7_UART1_REGS_BASE (KSEG1ADDR(0x08610E00))
-+#define AR7_BASE_BAUD ( 3686400 / 16 )
++mod-subdirs := joystick ftape drm drm-4.0 pcmcia
+
-+#endif
-diff -urN linux.old/include/asm-mips/ar7/avalanche_intc.h linux.dev/include/asm-mips/ar7/avalanche_intc.h
---- linux.old/include/asm-mips/ar7/avalanche_intc.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/include/asm-mips/ar7/avalanche_intc.h 2005-07-12 02:59:26.199667464 +0200
-@@ -0,0 +1,278 @@
-+ /*
-+ * Nitin Dhingra, iamnd@ti.com
-+ * Copyright (C) 2000 Texas Instruments Inc.
-+ *
-+ *
-+ * ########################################################################
++list-multi :=
++
++KEYMAP =defkeymap.o
++KEYBD =pc_keyb.o
++CONSOLE =console.o
++SERIAL =serial.o
++
++ifeq ($(ARCH),s390)
++ KEYMAP =
++ KEYBD =
++ CONSOLE =
++ SERIAL =
++endif
++
++ifeq ($(ARCH),mips)
++ ifneq ($(CONFIG_PC_KEYB),y)
++ KEYBD =
++ endif
++ ifeq ($(CONFIG_VR41XX_KIU),y)
++ ifeq ($(CONFIG_IBM_WORKPAD),y)
++ KEYMAP = ibm_workpad_keymap.o
++ endif
++ ifeq ($(CONFIG_VICTOR_MPC30X),y)
++ KEYMAP = victor_mpc30x_keymap.o
++ endif
++ KEYBD = vr41xx_keyb.o
++ endif
++endif
++
++ifeq ($(ARCH),s390x)
++ KEYMAP =
++ KEYBD =
++ CONSOLE =
++ SERIAL =
++endif
++
++ifeq ($(ARCH),m68k)
++ ifdef CONFIG_AMIGA
++ KEYBD = amikeyb.o
++ else
++ ifndef CONFIG_MAC
++ KEYBD =
++ endif
++ endif
++ SERIAL =
++endif
++
++ifeq ($(ARCH),parisc)
++ ifdef CONFIG_GSC_PS2
++ KEYBD = hp_psaux.o hp_keyb.o
++ else
++ KEYBD =
++ endif
++ ifdef CONFIG_SERIAL_MUX
++ CONSOLE += mux.o
++ endif
++ ifdef CONFIG_PDC_CONSOLE
++ CONSOLE += pdc_console.o
++ endif
++endif
++
++ifdef CONFIG_Q40
++ KEYBD += q40_keyb.o
++ SERIAL = serial.o
++endif
++
++ifdef CONFIG_APOLLO
++ KEYBD += dn_keyb.o
++endif
++
++ifeq ($(ARCH),parisc)
++ ifdef CONFIG_GSC_PS2
++ KEYBD = hp_psaux.o hp_keyb.o
++ else
++ KEYBD =
++ endif
++ ifdef CONFIG_PDC_CONSOLE
++ CONSOLE += pdc_console.o
++ endif
++endif
++
++ifeq ($(ARCH),arm)
++ ifneq ($(CONFIG_PC_KEYMAP),y)
++ KEYMAP =
++ endif
++ ifneq ($(CONFIG_PC_KEYB),y)
++ KEYBD =
++ endif
++endif
++
++ifeq ($(ARCH),sh)
++ KEYMAP =
++ KEYBD =
++ CONSOLE =
++ ifeq ($(CONFIG_SH_HP600),y)
++ KEYMAP = defkeymap.o
++ KEYBD = scan_keyb.o hp600_keyb.o
++ CONSOLE = console.o
++ endif
++ ifeq ($(CONFIG_SH_DMIDA),y)
++ # DMIDA does not connect the HD64465 PS/2 keyboard port
++ # but we allow for USB keyboards to be plugged in.
++ KEYMAP = defkeymap.o
++ KEYBD = # hd64465_keyb.o pc_keyb.o
++ CONSOLE = console.o
++ endif
++ ifeq ($(CONFIG_SH_EC3104),y)
++ KEYMAP = defkeymap.o
++ KEYBD = ec3104_keyb.o
++ CONSOLE = console.o
++ endif
++ ifeq ($(CONFIG_SH_DREAMCAST),y)
++ KEYMAP = defkeymap.o
++ KEYBD =
++ CONSOLE = console.o
++ endif
++endif
++
++ifeq ($(CONFIG_DECSTATION),y)
++ KEYMAP =
++ KEYBD =
++endif
++
++ifeq ($(CONFIG_BAGET_MIPS),y)
++ KEYBD =
++ SERIAL = vac-serial.o
++endif
++
++ifeq ($(CONFIG_NINO),y)
++ SERIAL =
++endif
++
++ifneq ($(CONFIG_SUN_SERIAL),)
++ SERIAL =
++endif
++
++ifeq ($(CONFIG_QTRONIX_KEYBOARD),y)
++ KEYBD = qtronix.o
++ KEYMAP = qtronixmap.o
++endif
++
++ifeq ($(CONFIG_DUMMY_KEYB),y)
++ KEYBD = dummy_keyb.o
++endif
++
++obj-$(CONFIG_VT) += vt.o vc_screen.o consolemap.o consolemap_deftbl.o $(CONSOLE) selection.o
++obj-$(CONFIG_SERIAL) += $(SERIAL)
++obj-$(CONFIG_PARPORT_SERIAL) += parport_serial.o
++obj-$(CONFIG_SERIAL_HCDP) += hcdp_serial.o
++obj-$(CONFIG_SERIAL_21285) += serial_21285.o
++obj-$(CONFIG_SERIAL_SA1100) += serial_sa1100.o
++obj-$(CONFIG_SERIAL_AMBA) += serial_amba.o
++obj-$(CONFIG_TS_AU1X00_ADS7846) += au1000_ts.o
++obj-$(CONFIG_SERIAL_DEC) += decserial.o
++
++ifndef CONFIG_SUN_KEYBOARD
++ obj-$(CONFIG_VT) += keyboard.o $(KEYMAP) $(KEYBD)
++else
++ obj-$(CONFIG_PCI) += keyboard.o $(KEYMAP)
++endif
++
++obj-$(CONFIG_HIL) += hp_keyb.o
++obj-$(CONFIG_MAGIC_SYSRQ) += sysrq.o
++obj-$(CONFIG_ATARI_DSP56K) += dsp56k.o
++obj-$(CONFIG_ROCKETPORT) += rocket.o
++obj-$(CONFIG_MOXA_SMARTIO) += mxser.o
++obj-$(CONFIG_MOXA_INTELLIO) += moxa.o
++obj-$(CONFIG_DIGI) += pcxx.o
++obj-$(CONFIG_DIGIEPCA) += epca.o
++obj-$(CONFIG_CYCLADES) += cyclades.o
++obj-$(CONFIG_STALLION) += stallion.o
++obj-$(CONFIG_ISTALLION) += istallion.o
++obj-$(CONFIG_SIBYTE_SB1250_DUART) += sb1250_duart.o
++obj-$(CONFIG_COMPUTONE) += ip2.o ip2main.o
++obj-$(CONFIG_RISCOM8) += riscom8.o
++obj-$(CONFIG_ISI) += isicom.o
++obj-$(CONFIG_ESPSERIAL) += esp.o
++obj-$(CONFIG_SYNCLINK) += synclink.o
++obj-$(CONFIG_SYNCLINKMP) += synclinkmp.o
++obj-$(CONFIG_N_HDLC) += n_hdlc.o
++obj-$(CONFIG_SPECIALIX) += specialix.o
++obj-$(CONFIG_AMIGA_BUILTIN_SERIAL) += amiserial.o
++obj-$(CONFIG_A2232) += ser_a2232.o generic_serial.o
++obj-$(CONFIG_SX) += sx.o generic_serial.o
++obj-$(CONFIG_RIO) += rio/rio.o generic_serial.o
++obj-$(CONFIG_SH_SCI) += sh-sci.o generic_serial.o
++obj-$(CONFIG_SERIAL167) += serial167.o
++obj-$(CONFIG_MVME147_SCC) += generic_serial.o vme_scc.o
++obj-$(CONFIG_MVME162_SCC) += generic_serial.o vme_scc.o
++obj-$(CONFIG_BVME6000_SCC) += generic_serial.o vme_scc.o
++obj-$(CONFIG_HVC_CONSOLE) += hvc_console.o
++obj-$(CONFIG_SERIAL_TX3912) += generic_serial.o serial_tx3912.o
++obj-$(CONFIG_TXX927_SERIAL) += serial_txx927.o
++obj-$(CONFIG_SERIAL_TXX9) += generic_serial.o serial_txx9.o
++obj-$(CONFIG_IP22_SERIAL) += sgiserial.o
++obj-$(CONFIG_AU1X00_UART) += au1x00-serial.o
++obj-$(CONFIG_SGI_L1_SERIAL) += sn_serial.o
++
++subdir-$(CONFIG_RIO) += rio
++subdir-$(CONFIG_INPUT) += joystick
++
++obj-$(CONFIG_ATIXL_BUSMOUSE) += atixlmouse.o
++obj-$(CONFIG_LOGIBUSMOUSE) += logibusmouse.o
++obj-$(CONFIG_PRINTER) += lp.o
++obj-$(CONFIG_TIPAR) += tipar.o
++obj-$(CONFIG_OBMOUSE) += obmouse.o
++
++ifeq ($(CONFIG_INPUT),y)
++obj-y += joystick/js.o
++endif
++
++#
++# Texas Intruments VLYNQ driver
++#
++
++subdir-$(CONFIG_AR7_VLYNQ) += avalanche_vlynq
++obj-$(CONFIG_AR7_VLYNQ) += avalanche_vlynq/avalanche_vlynq.o
++
++obj-$(CONFIG_FETCHOP) += fetchop.o
++obj-$(CONFIG_BUSMOUSE) += busmouse.o
++obj-$(CONFIG_DTLK) += dtlk.o
++obj-$(CONFIG_R3964) += n_r3964.o
++obj-$(CONFIG_APPLICOM) += applicom.o
++obj-$(CONFIG_SONYPI) += sonypi.o
++obj-$(CONFIG_MS_BUSMOUSE) += msbusmouse.o
++obj-$(CONFIG_82C710_MOUSE) += qpmouse.o
++obj-$(CONFIG_AMIGAMOUSE) += amigamouse.o
++obj-$(CONFIG_ATARIMOUSE) += atarimouse.o
++obj-$(CONFIG_ADBMOUSE) += adbmouse.o
++obj-$(CONFIG_PC110_PAD) += pc110pad.o
++obj-$(CONFIG_MK712_MOUSE) += mk712.o
++obj-$(CONFIG_RTC) += rtc.o
++obj-$(CONFIG_GEN_RTC) += genrtc.o
++obj-$(CONFIG_EFI_RTC) += efirtc.o
++obj-$(CONFIG_MIPS_RTC) += mips_rtc.o
++obj-$(CONFIG_SGI_IP27_RTC) += ip27-rtc.o
++ifeq ($(CONFIG_PPC),)
++ obj-$(CONFIG_NVRAM) += nvram.o
++endif
++obj-$(CONFIG_TOSHIBA) += toshiba.o
++obj-$(CONFIG_I8K) += i8k.o
++obj-$(CONFIG_DS1286) += ds1286.o
++obj-$(CONFIG_DS1620) += ds1620.o
++obj-$(CONFIG_DS1742) += ds1742.o
++obj-$(CONFIG_INTEL_RNG) += i810_rng.o
++obj-$(CONFIG_AMD_RNG) += amd768_rng.o
++obj-$(CONFIG_HW_RANDOM) += hw_random.o
++obj-$(CONFIG_AMD_PM768) += amd76x_pm.o
++obj-$(CONFIG_BRIQ_PANEL) += briq_panel.o
++
++obj-$(CONFIG_ITE_GPIO) += ite_gpio.o
++obj-$(CONFIG_AU1X00_GPIO) += au1000_gpio.o
++obj-$(CONFIG_AU1550_PSC_SPI) += au1550_psc_spi.o
++obj-$(CONFIG_AU1X00_USB_TTY) += au1000_usbtty.o
++obj-$(CONFIG_AU1X00_USB_RAW) += au1000_usbraw.o
++obj-$(CONFIG_COBALT_LCD) += lcd.o
++
++obj-$(CONFIG_QIC02_TAPE) += tpqic02.o
++
++subdir-$(CONFIG_FTAPE) += ftape
++subdir-$(CONFIG_DRM_OLD) += drm-4.0
++subdir-$(CONFIG_DRM_NEW) += drm
++subdir-$(CONFIG_PCMCIA) += pcmcia
++subdir-$(CONFIG_AGP) += agp
++
++ifeq ($(CONFIG_FTAPE),y)
++obj-y += ftape/ftape.o
++endif
++
++obj-$(CONFIG_H8) += h8.o
++obj-$(CONFIG_PPDEV) += ppdev.o
++obj-$(CONFIG_DZ) += dz.o
++obj-$(CONFIG_NWBUTTON) += nwbutton.o
++obj-$(CONFIG_NWFLASH) += nwflash.o
++obj-$(CONFIG_SCx200) += scx200.o
++obj-$(CONFIG_SCx200_GPIO) += scx200_gpio.o
++
++# Only one watchdog can succeed. We probe the hardware watchdog
++# drivers first, then the softdog driver. This means if your hardware
++# watchdog dies or is 'borrowed' for some reason the software watchdog
++# still gives you some cover.
++
++obj-$(CONFIG_PCWATCHDOG) += pcwd.o
++obj-$(CONFIG_ACQUIRE_WDT) += acquirewdt.o
++obj-$(CONFIG_ADVANTECH_WDT) += advantechwdt.o
++obj-$(CONFIG_IB700_WDT) += ib700wdt.o
++obj-$(CONFIG_MIXCOMWD) += mixcomwd.o
++obj-$(CONFIG_60XX_WDT) += sbc60xxwdt.o
++obj-$(CONFIG_W83877F_WDT) += w83877f_wdt.o
++obj-$(CONFIG_SC520_WDT) += sc520_wdt.o
++obj-$(CONFIG_WDT) += wdt.o
++obj-$(CONFIG_WDTPCI) += wdt_pci.o
++obj-$(CONFIG_21285_WATCHDOG) += wdt285.o
++obj-$(CONFIG_977_WATCHDOG) += wdt977.o
++obj-$(CONFIG_I810_TCO) += i810-tco.o
++obj-$(CONFIG_MACHZ_WDT) += machzwd.o
++obj-$(CONFIG_SH_WDT) += shwdt.o
++obj-$(CONFIG_EUROTECH_WDT) += eurotechwdt.o
++obj-$(CONFIG_ALIM7101_WDT) += alim7101_wdt.o
++obj-$(CONFIG_ALIM1535_WDT) += alim1535d_wdt.o
++obj-$(CONFIG_INDYDOG) += indydog.o
++obj-$(CONFIG_SC1200_WDT) += sc1200wdt.o
++obj-$(CONFIG_SCx200_WDT) += scx200_wdt.o
++obj-$(CONFIG_WAFER_WDT) += wafer5823wdt.o
++obj-$(CONFIG_SOFT_WATCHDOG) += softdog.o
++obj-$(CONFIG_INDYDOG) += indydog.o
++obj-$(CONFIG_8xx_WDT) += mpc8xx_wdt.o
++
++subdir-$(CONFIG_MWAVE) += mwave
++ifeq ($(CONFIG_MWAVE),y)
++ obj-y += mwave/mwave.o
++endif
++
++subdir-$(CONFIG_IPMI_HANDLER) += ipmi
++ifeq ($(CONFIG_IPMI_HANDLER),y)
++ obj-y += ipmi/ipmi.o
++endif
++
++include $(TOPDIR)/Rules.make
++
++fastdep:
++
++conmakehash: conmakehash.c
++ $(HOSTCC) $(HOSTCFLAGS) -o conmakehash conmakehash.c
++
++consolemap_deftbl.c: $(FONTMAPFILE) conmakehash
++ ./conmakehash $(FONTMAPFILE) > consolemap_deftbl.c
++
++consolemap_deftbl.o: consolemap_deftbl.c $(TOPDIR)/include/linux/types.h
++
++.DELETE_ON_ERROR:
++
++defkeymap.c: defkeymap.map
++ set -e ; loadkeys --mktable $< | sed -e 's/^static *//' > $@
++
++qtronixmap.c: qtronixmap.map
++ set -e ; loadkeys --mktable $< | sed -e 's/^static *//' > $@
++
++ibm_workpad_keymap.c: ibm_workpad_keymap.map
++ set -e ; loadkeys --mktable $< | sed -e 's/^static *//' > $@
++
++victor_mpc30x_keymap.c: victor_mpc30x_keymap.map
++ set -e ; loadkeys --mktable $< | sed -e 's/^static *//' > $@
+diff -urN linux.old/drivers/char/avalanche_vlynq/Makefile linux.dev/drivers/char/avalanche_vlynq/Makefile
+--- linux.old/drivers/char/avalanche_vlynq/Makefile 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/char/avalanche_vlynq/Makefile 2005-11-10 01:10:45.871576250 +0100
+@@ -0,0 +1,16 @@
++#
++# Makefile for the linux kernel.
++#
++# Note! Dependencies are done automagically by 'make dep', which also
++# removes any old dependencies. DON'T put your own dependencies here
++# unless it's something special (ie not a .c file).
++#
++# Note 2! The CFLAGS definitions are now in the main makefile...
++
++O_TARGET := avalanche_vlynq.o
++
++export-objs := vlynq_board.o
++
++obj-y += vlynq_drv.o vlynq_hal.o vlynq_board.o
++
++include $(TOPDIR)/Rules.make
+diff -urN linux.old/drivers/char/avalanche_vlynq/vlynq_board.c linux.dev/drivers/char/avalanche_vlynq/vlynq_board.c
+--- linux.old/drivers/char/avalanche_vlynq/vlynq_board.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/char/avalanche_vlynq/vlynq_board.c 2005-11-10 01:10:45.871576250 +0100
+@@ -0,0 +1,184 @@
++/*
++ * Jeff Harrell, jharrell@ti.com
++ * Copyright (C) 2001 Texas Instruments, Inc. All rights reserved.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
-+ * ########################################################################
-+ *
-+ * Defines of the Sead board specific address-MAP, registers, etc.
-+ *
++ * Texas Instruments Sangam specific setup.
+ */
-+#ifndef _AVALANCHE_INTC_H
-+#define _AVALANCHE_INTC_H
-+
-+#define MIPS_EXCEPTION_OFFSET 8
++#include <linux/config.h>
++#include <linux/module.h>
++#include <asm/ar7/sangam.h>
++#include <asm/ar7/avalanche_misc.h>
++#include <asm/ar7/vlynq.h>
++
++#define SYS_VLYNQ_LOCAL_INTERRUPT_VECTOR 30 /* MSB - 1 bit */
++#define SYS_VLYNQ_REMOTE_INTERRUPT_VECTOR 31 /* MSB bit */
++#define SYS_VLYNQ_OPTIONS 0x7F; /* all options*/
+
-+/******************************************************************************
-+ Avalanche Interrupt number
-+******************************************************************************/
-+#define AVINTNUM(x) ((x) - MIPS_EXCEPTION_OFFSET)
++/* These defines are board specific */
+
-+/*******************************************************************************
-+*Linux Interrupt number
-+*******************************************************************************/
-+#define LNXINTNUM(x)((x) + MIPS_EXCEPTION_OFFSET)
+
++#define VLYNQ0_REMOTE_WINDOW1_OFFSET (0x0C000000)
++#define VLYNQ0_REMOTE_WINDOW1_SIZE (0x500)
+
+
-+#define AVALANCHE_INT_END_PRIMARY (40 + MIPS_EXCEPTION_OFFSET)
-+#define AVALANCHE_INT_END_SECONDARY (32 + MIPS_EXCEPTION_OFFSET)
++#define VLYNQ1_REMOTE_WINDOW1_OFFSET (0x0C000000)
++#define VLYNQ1_REMOTE_WINDOW1_SIZE (0x500)
+
-+#define AVALANCHE_INT_END_PRIMARY_REG1 (31 + MIPS_EXCEPTION_OFFSET)
-+#define AVALANCHE_INT_END_PRIMARY_REG2 (39 + MIPS_EXCEPTION_OFFSET)
+
++extern VLYNQ_DEV vlynqDevice0, vlynqDevice1;
++int vlynq_init_status[2] = {0, 0};
++EXPORT_SYMBOL(vlynq_init_status);
++static int reset_hack = 1;
+
-+#define AVALANCHE_INT_END (AVINTNUM(AVALANCHE_INT_END_PRIMARY) + \
-+ AVINTNUM(AVALANCHE_INT_END_SECONDARY) \
-+ + MIPS_EXCEPTION_OFFSET - 1) /* Suraj, check */
++void vlynq_ar7wrd_dev_init()
++{
++ *(unsigned long*) AVALANCHE_GPIO_ENBL |= (1<<18);
++ vlynq_delay(20000);
++ *(unsigned long*) AVALANCHE_GPIO_DIR &= ~(1<<18);
++ vlynq_delay(20000);
++ *(unsigned long*) AVALANCHE_GPIO_DATA_OUT&= ~(1<<18);
++ vlynq_delay(50000);
++ *(unsigned long*) AVALANCHE_GPIO_DATA_OUT|= (1<<18);
++ vlynq_delay(50000);
++
++ /* Initialize the MIPS host vlynq driver for a given vlynq interface */
++ vlynqDevice0.dev_idx = 0; /* first vlynq module - this parameter is for reference only */
++ vlynqDevice0.module_base = AVALANCHE_LOW_VLYNQ_CONTROL_BASE; /* vlynq0 module base address */
++
++#if defined(CONFIG_VLYNQ_CLK_LOCAL)
++ vlynqDevice0.clk_source = VLYNQ_CLK_SOURCE_LOCAL;
++#else
++ vlynqDevice0.clk_source = VLYNQ_CLK_SOURCE_REMOTE;
++#endif
++ vlynqDevice0.clk_div = 0x01; /* board/hardware specific */
++ vlynqDevice0.state = VLYNQ_DRV_STATE_UNINIT; /* uninitialized module */
+
++ /* Populate vlynqDevice0.local_mem & Vlynq0.remote_mem based on system configuration */
++ /*Local memory configuration */
+
-+/*
-+ * Avalanche interrupt controller register base (primary)
-+ */
-+#define KSEG1_BASE 0xA0000000
-+#define KSEG_INV_MASK 0x1FFFFFFF /* Inverted mask for kseg address */
-+#define PHYS_ADDR(addr) ((addr) & KSEG_INV_MASK)
-+#define PHYS_TO_K1(addr) (PHYS_ADDR(addr)|KSEG1_BASE)
++ /* Demiurg : not good !*/
++#if 0
++ vlynqDevice0.local_mem.Txmap= AVALANCHE_LOW_VLYNQ_MEM_MAP_BASE & ~(0xc0000000) ; /* physical address */
++ vlynqDevice0.remote_mem.RxOffset[0]= VLYNQ0_REMOTE_WINDOW1_OFFSET; /* This is specific to the board on the other end */
++ vlynqDevice0.remote_mem.RxSize[0]=VLYNQ0_REMOTE_WINDOW1_SIZE;
++#endif
+
-+#define AVALANCHE_ICTRL_REGS_BASE KSEG1ADDR(0x08612400)// AVALANCHE_INTC_BASE
++ /* Demiurg : This is how it should be ! */
++ vlynqDevice0.local_mem.Txmap = PHYSADDR(AVALANCHE_LOW_VLYNQ_MEM_MAP_BASE);
++#define VLYNQ_ACX111_MEM_OFFSET 0xC0000000 /* Physical address of ACX111 memory */
++#define VLYNQ_ACX111_MEM_SIZE 0x00040000 /* Total size of the ACX111 memory */
++#define VLYNQ_ACX111_REG_OFFSET 0xF0000000 /* PHYS_ADDR of ACX111 control registers */
++#define VLYNQ_ACX111_REG_SIZE 0x00022000 /* Size of ACX111 registers area, MAC+PHY */
++#define ACX111_VL1_REMOTE_SIZE 0x1000000
++ vlynqDevice0.remote_mem.RxOffset[0] = VLYNQ_ACX111_MEM_OFFSET;
++ vlynqDevice0.remote_mem.RxSize[0] = VLYNQ_ACX111_MEM_SIZE ;
++ vlynqDevice0.remote_mem.RxOffset[1] = VLYNQ_ACX111_REG_OFFSET;
++ vlynqDevice0.remote_mem.RxSize[1] = VLYNQ_ACX111_REG_SIZE ;
++ vlynqDevice0.remote_mem.Txmap = 0;
++ vlynqDevice0.local_mem.RxOffset[0] = AVALANCHE_SDRAM_BASE;
++ vlynqDevice0.local_mem.RxSize[0] = ACX111_VL1_REMOTE_SIZE;
++
++
++ /* Local interrupt configuration */
++ vlynqDevice0.local_irq.intLocal = VLYNQ_INT_LOCAL; /* Host handles vlynq interrupts*/
++ vlynqDevice0.local_irq.intRemote = VLYNQ_INT_ROOT_ISR; /* vlynq root isr used */
++ vlynqDevice0.local_irq.map_vector = SYS_VLYNQ_LOCAL_INTERRUPT_VECTOR;
++ vlynqDevice0.local_irq.intr_ptr = 0; /* Since remote interrupts part of vlynq root isr this is unused */
++
++ /* Remote interrupt configuration */
++ vlynqDevice0.remote_irq.intLocal = VLYNQ_INT_REMOTE; /* MIPS handles interrupts */
++ vlynqDevice0.remote_irq.intRemote = VLYNQ_INT_ROOT_ISR; /* Not significant since MIPS handles interrupts */
++ vlynqDevice0.remote_irq.map_vector = SYS_VLYNQ_REMOTE_INTERRUPT_VECTOR;
++ vlynqDevice0. remote_irq.intr_ptr = AVALANCHE_INTC_BASE; /* Not significant since MIPS handles interrupts */
++
++ if(reset_hack != 1)
++ printk("About to re-init the VLYNQ.\n");
++
++ if(vlynq_init(&vlynqDevice0,VLYNQ_INIT_PERFORM_ALL)== 0)
++ {
++ /* Suraj added the following to keep the 1130 going. */
++ vlynq_interrupt_vector_set(&vlynqDevice0, 0 /* intr vector line running into 1130 vlynq */,
++ 0 /* intr mapped onto the interrupt register on remote vlynq and this vlynq */,
++ VLYNQ_REMOTE_DVC, 0 /* polarity active high */, 0 /* interrupt Level triggered */);
++
++ /* System wide interrupt is 80 for 1130, please note. */
++ vlynq_init_status[0] = 1;
++ reset_hack = 2;
++ }
++ else
++ {
++ if(reset_hack == 1)
++ printk("VLYNQ INIT FAILED: Please try cold reboot. \n");
++ else
++ printk("Failed to initialize the VLYNQ interface at insmod.\n");
+
-+/******************************************************************************
-+ * Avalanche exception controller register base (secondary)
-+ ******************************************************************************/
-+#define AVALANCHE_ECTRL_REGS_BASE (AVALANCHE_ICTRL_REGS_BASE + 0x80)
++ }
++}
+
++void vlynq_dev_init(void)
++{
++ volatile unsigned int *reset_base = (unsigned int *) AVALANCHE_RESET_CONTROL_BASE;
+
-+/******************************************************************************
-+ * Avalanche Interrupt pacing register base (secondary)
-+ ******************************************************************************/
-+#define AVALANCHE_IPACE_REGS_BASE (AVALANCHE_ICTRL_REGS_BASE + 0xA0)
++ *reset_base &= ~((1 << AVALANCHE_LOW_VLYNQ_RESET_BIT)); /* | (1 << AVALANCHE_HIGH_VLYNQ_RESET_BIT)); */
+
++ vlynq_delay(20000);
+
++ /* Bring vlynq out of reset if not already done */
++ *reset_base |= (1 << AVALANCHE_LOW_VLYNQ_RESET_BIT); /* | (1 << AVALANCHE_HIGH_VLYNQ_RESET_BIT); */
++ vlynq_delay(20000); /* Allowing sufficient time to VLYNQ to settle down.*/
+
-+/******************************************************************************
-+ * Avalanche Interrupt Channel Control register base
-+ *****************************************************************************/
-+#define AVALANCHE_CHCTRL_REGS_BASE (AVALANCHE_ICTRL_REGS_BASE + 0x200)
++ vlynq_ar7wrd_dev_init( );
+
++}
+
-+struct avalanche_ictrl_regs /* Avalanche Interrupt control registers */
++/* This function is board specific and should be ported for each board. */
++void remote_vlynq_dev_reset_ctrl(unsigned int module_reset_bit,
++ AVALANCHE_RESET_CTRL_T reset_ctrl)
+{
-+ volatile unsigned long intsr1; /* Interrupt Status/Set Register 1 0x00 */
-+ volatile unsigned long intsr2; /* Interrupt Status/Set Register 2 0x04 */
-+ volatile unsigned long unused1; /*0x08 */
-+ volatile unsigned long unused2; /*0x0C */
-+ volatile unsigned long intcr1; /* Interrupt Clear Register 1 0x10 */
-+ volatile unsigned long intcr2; /* Interrupt Clear Register 2 0x14 */
-+ volatile unsigned long unused3; /*0x18 */
-+ volatile unsigned long unused4; /*0x1C */
-+ volatile unsigned long intesr1; /* Interrupt Enable (Set) Register 1 0x20 */
-+ volatile unsigned long intesr2; /* Interrupt Enable (Set) Register 2 0x24 */
-+ volatile unsigned long unused5; /*0x28 */
-+ volatile unsigned long unused6; /*0x2C */
-+ volatile unsigned long intecr1; /* Interrupt Enable Clear Register 1 0x30 */
-+ volatile unsigned long intecr2; /* Interrupt Enable Clear Register 2 0x34 */
-+ volatile unsigned long unused7; /* 0x38 */
-+ volatile unsigned long unused8; /* 0x3c */
-+ volatile unsigned long pintir; /* Priority Interrupt Index Register 0x40 */
-+ volatile unsigned long intmsr; /* Priority Interrupt Mask Index Reg 0x44 */
-+ volatile unsigned long unused9; /* 0x48 */
-+ volatile unsigned long unused10; /* 0x4C */
-+ volatile unsigned long intpolr1; /* Interrupt Polarity Mask register 10x50 */
-+ volatile unsigned long intpolr2; /* Interrupt Polarity Mask register 20x54 */
-+ volatile unsigned long unused11; /* 0x58 */
-+ volatile unsigned long unused12; /*0x5C */
-+ volatile unsigned long inttypr1; /* Interrupt Type Mask register 10x60 */
-+ volatile unsigned long inttypr2; /* Interrupt Type Mask register 20x64 */
-+};
++ if(module_reset_bit >= 32)
++ return;
+
-+struct avalanche_exctrl_regs /* Avalanche Exception control registers */
-+{
-+ volatile unsigned long exsr; /* Exceptions Status/Set register 0x80 */
-+ volatile unsigned long reserved; /*0x84 */
-+ volatile unsigned long excr; /* Exceptions Clear Register 0x88 */
-+ volatile unsigned long reserved1; /*0x8c */
-+ volatile unsigned long exiesr; /* Exceptions Interrupt Enable (set) 0x90 */
-+ volatile unsigned long reserved2; /*0x94 */
-+ volatile unsigned long exiecr; /* Exceptions Interrupt Enable(clear)0x98 */
++ switch(module_reset_bit)
++ {
++ case 0:
++ if(OUT_OF_RESET == reset_ctrl)
++ {
++ if(reset_hack) return;
++
++ vlynq_delay(20000);
++ printk("Un-resetting the remote device.\n");
++ vlynq_dev_init();
++ printk("Re-initialized the VLYNQ.\n");
++ reset_hack = 2;
++ }
++ else if(IN_RESET == reset_ctrl)
++ {
++ *(unsigned long*) AVALANCHE_GPIO_DATA_OUT &= ~(1<<18);
++
++ vlynq_delay(20000);
++ printk("Resetting the remote device.\n");
++ reset_hack = 0;
++ }
++ else
++ ;
++ break;
++
++ default:
++ break;
++
++ }
++}
++
+diff -urN linux.old/drivers/char/avalanche_vlynq/vlynq_drv.c linux.dev/drivers/char/avalanche_vlynq/vlynq_drv.c
+--- linux.old/drivers/char/avalanche_vlynq/vlynq_drv.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/char/avalanche_vlynq/vlynq_drv.c 2005-11-10 01:10:45.891577500 +0100
+@@ -0,0 +1,243 @@
++/******************************************************************************
++ * FILE PURPOSE: Vlynq Linux Device Driver Source
++ ******************************************************************************
++ * FILE NAME: vlynq_drv.c
++ *
++ * DESCRIPTION: Vlynq Linux Device Driver Source
++ *
++ * REVISION HISTORY:
++ *
++ * Date Description Author
++ *-----------------------------------------------------------------------------
++ * 17 July 2003 Initial Creation Anant Gole
++ * 17 Dec 2003 Updates Sharath Kumar
++ *
++ * (C) Copyright 2003, Texas Instruments, Inc
++ *******************************************************************************/
++
++#include <linux/config.h>
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/sched.h>
++#include <linux/miscdevice.h>
++#include <linux/smp_lock.h>
++#include <linux/delay.h>
++#include <linux/proc_fs.h>
++#include <linux/capability.h>
++#include <asm/ar7/avalanche_intc.h>
++#include <asm/ar7/sangam.h>
++#include <asm/ar7/vlynq.h>
++
++
++#define TI_VLYNQ_VERSION "0.2"
++
++/* debug on ? */
++#define VLYNQ_DEBUG
++
++/* Macro for debug and error printf's */
++#ifdef VLYNQ_DEBUG
++#define DBGPRINT printk
++#else
++#define DBGPRINT(x)
++#endif
++
++#define ERRPRINT printk
++
++/* Define the max vlynq ports this driver will support.
++ Device name strings are statically added here */
++#define MAX_VLYNQ_PORTS 2
++
++
++/* Type define for VLYNQ private structure */
++typedef struct vlynqPriv{
++ int irq;
++ VLYNQ_DEV *vlynqDevice;
++}VLYNQ_PRIV;
++
++extern int vlynq_init_status[2];
++
++/* Extern Global variable for vlynq devices used in initialization of the vlynq device
++ * These variables need to be populated/initialized by the system as part of initialization
++ * process. The vlynq enumerator can run at initialization and populate these globals
++ */
++
++VLYNQ_DEV vlynqDevice0;
++VLYNQ_DEV vlynqDevice1;
++
++/* Defining dummy macro AVALANCHE_HIGH_VLYNQ_INT to take
++ * care of compilation in case of single vlynq device
++ */
++
++#ifndef AVALANCHE_HIGH_VLYNQ_INT
++#define AVALANCHE_HIGH_VLYNQ_INT 0
++#endif
++
++
++
++/* vlynq private object */
++VLYNQ_PRIV vlynq_priv[CONFIG_AR7_VLYNQ_PORTS] = {
++ { LNXINTNUM(AVALANCHE_LOW_VLYNQ_INT),&vlynqDevice0},
++ { LNXINTNUM(AVALANCHE_HIGH_VLYNQ_INT),&vlynqDevice1},
+};
-+struct avalanche_ipace_regs
++
++extern void vlynq_dev_init(void);
++
++
++/* =================================== all the operations */
++
++static int
++vlynq_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
+{
++ return 0;
++}
+
-+ volatile unsigned long ipacep; /* Interrupt pacing register 0xa0 */
-+ volatile unsigned long ipacemap; /*Interrupt Pacing Map Register 0xa4 */
-+ volatile unsigned long ipacemax; /*Interrupt Pacing Max Register 0xa8 */
++static struct file_operations vlynq_fops = {
++ owner: THIS_MODULE,
++ ioctl: vlynq_ioctl,
+};
-+struct avalanche_channel_int_number
-+{
-+ volatile unsigned long cintnr0; /* Channel Interrupt Number Register0x200 */
-+ volatile unsigned long cintnr1; /* Channel Interrupt Number Register0x204 */
-+ volatile unsigned long cintnr2; /* Channel Interrupt Number Register0x208 */
-+ volatile unsigned long cintnr3; /* Channel Interrupt Number Register0x20C */
-+ volatile unsigned long cintnr4; /* Channel Interrupt Number Register0x210 */
-+ volatile unsigned long cintnr5; /* Channel Interrupt Number Register0x214 */
-+ volatile unsigned long cintnr6; /* Channel Interrupt Number Register0x218 */
-+ volatile unsigned long cintnr7; /* Channel Interrupt Number Register0x21C */
-+ volatile unsigned long cintnr8; /* Channel Interrupt Number Register0x220 */
-+ volatile unsigned long cintnr9; /* Channel Interrupt Number Register0x224 */
-+ volatile unsigned long cintnr10; /* Channel Interrupt Number Register0x228 */
-+ volatile unsigned long cintnr11; /* Channel Interrupt Number Register0x22C */
-+ volatile unsigned long cintnr12; /* Channel Interrupt Number Register0x230 */
-+ volatile unsigned long cintnr13; /* Channel Interrupt Number Register0x234 */
-+ volatile unsigned long cintnr14; /* Channel Interrupt Number Register0x238 */
-+ volatile unsigned long cintnr15; /* Channel Interrupt Number Register0x23C */
-+ volatile unsigned long cintnr16; /* Channel Interrupt Number Register0x240 */
-+ volatile unsigned long cintnr17; /* Channel Interrupt Number Register0x244 */
-+ volatile unsigned long cintnr18; /* Channel Interrupt Number Register0x248 */
-+ volatile unsigned long cintnr19; /* Channel Interrupt Number Register0x24C */
-+ volatile unsigned long cintnr20; /* Channel Interrupt Number Register0x250 */
-+ volatile unsigned long cintnr21; /* Channel Interrupt Number Register0x254 */
-+ volatile unsigned long cintnr22; /* Channel Interrupt Number Register0x358 */
-+ volatile unsigned long cintnr23; /* Channel Interrupt Number Register0x35C */
-+ volatile unsigned long cintnr24; /* Channel Interrupt Number Register0x260 */
-+ volatile unsigned long cintnr25; /* Channel Interrupt Number Register0x264 */
-+ volatile unsigned long cintnr26; /* Channel Interrupt Number Register0x268 */
-+ volatile unsigned long cintnr27; /* Channel Interrupt Number Register0x26C */
-+ volatile unsigned long cintnr28; /* Channel Interrupt Number Register0x270 */
-+ volatile unsigned long cintnr29; /* Channel Interrupt Number Register0x274 */
-+ volatile unsigned long cintnr30; /* Channel Interrupt Number Register0x278 */
-+ volatile unsigned long cintnr31; /* Channel Interrupt Number Register0x27C */
-+ volatile unsigned long cintnr32; /* Channel Interrupt Number Register0x280 */
-+ volatile unsigned long cintnr33; /* Channel Interrupt Number Register0x284 */
-+ volatile unsigned long cintnr34; /* Channel Interrupt Number Register0x288 */
-+ volatile unsigned long cintnr35; /* Channel Interrupt Number Register0x28C */
-+ volatile unsigned long cintnr36; /* Channel Interrupt Number Register0x290 */
-+ volatile unsigned long cintnr37; /* Channel Interrupt Number Register0x294 */
-+ volatile unsigned long cintnr38; /* Channel Interrupt Number Register0x298 */
-+ volatile unsigned long cintnr39; /* Channel Interrupt Number Register0x29C */
++
++/* Vlynq device object */
++static struct miscdevice vlynq_dev [MAX_VLYNQ_PORTS] = {
++ { MISC_DYNAMIC_MINOR , "vlynq0", &vlynq_fops },
++ { MISC_DYNAMIC_MINOR , "vlynq1", &vlynq_fops },
+};
+
-+struct avalanche_interrupt_line_to_channel
++
++/* Proc read function */
++static int
++vlynq_read_link_proc(char *buf, char **start, off_t offset, int count, int *eof, void *unused)
+{
-+ unsigned long int_line0; /* Start of primary interrupts */
-+ unsigned long int_line1;
-+ unsigned long int_line2;
-+ unsigned long int_line3;
-+ unsigned long int_line4;
-+ unsigned long int_line5;
-+ unsigned long int_line6;
-+ unsigned long int_line7;
-+ unsigned long int_line8;
-+ unsigned long int_line9;
-+ unsigned long int_line10;
-+ unsigned long int_line11;
-+ unsigned long int_line12;
-+ unsigned long int_line13;
-+ unsigned long int_line14;
-+ unsigned long int_line15;
-+ unsigned long int_line16;
-+ unsigned long int_line17;
-+ unsigned long int_line18;
-+ unsigned long int_line19;
-+ unsigned long int_line20;
-+ unsigned long int_line21;
-+ unsigned long int_line22;
-+ unsigned long int_line23;
-+ unsigned long int_line24;
-+ unsigned long int_line25;
-+ unsigned long int_line26;
-+ unsigned long int_line27;
-+ unsigned long int_line28;
-+ unsigned long int_line29;
-+ unsigned long int_line30;
-+ unsigned long int_line31;
-+ unsigned long int_line32;
-+ unsigned long int_line33;
-+ unsigned long int_line34;
-+ unsigned long int_line35;
-+ unsigned long int_line36;
-+ unsigned long int_line37;
-+ unsigned long int_line38;
-+ unsigned long int_line39;
-+};
++ int instance;
++ int len = 0;
++
++ len += sprintf(buf +len,"VLYNQ Devices : %d\n",CONFIG_AR7_VLYNQ_PORTS);
+
++ for(instance =0;instance < CONFIG_AR7_VLYNQ_PORTS;instance++)
++ {
++ int link_state;
++ char *link_msg[] = {" DOWN "," UP "};
++
++ if(vlynq_init_status[instance] == 0)
++ link_state = 0;
+
-+/* Interrupt Line #'s (Sangam peripherals) */
++ else if (vlynq_link_check(vlynq_priv[instance].vlynqDevice))
++ link_state = 1;
+
-+/*------------------------------*/
-+/* Sangam primary interrupts */
-+/*------------------------------*/
++ else
++ link_state = 0;
+
-+#define UNIFIED_SECONDARY_INTERRUPT 0
-+#define AVALANCHE_EXT_INT_0 1
-+#define AVALANCHE_EXT_INT_1 2
-+/* Line #3 Reserved */
-+/* Line #4 Reserved */
-+#define AVALANCHE_TIMER_0_INT 5
-+#define AVALANCHE_TIMER_1_INT 6
-+#define AVALANCHE_UART0_INT 7
-+#define AVALANCHE_UART1_INT 8
-+#define AVALANCHE_PDMA_INT0 9
-+#define AVALANCHE_PDMA_INT1 10
-+/* Line #11 Reserved */
-+/* Line #12 Reserved */
-+/* Line #13 Reserved */
-+/* Line #14 Reserved */
-+#define AVALANCHE_ATM_SAR_INT 15
-+/* Line #16 Reserved */
-+/* Line #17 Reserved */
-+/* Line #18 Reserved */
-+#define AVALANCHE_MAC0_INT 19
-+/* Line #20 Reserved */
-+#define AVALANCHE_VLYNQ0_INT 21
-+#define AVALANCHE_CODEC_WAKE_INT 22
-+/* Line #23 Reserved */
-+#define AVALANCHE_USB_INT 24
-+#define AVALANCHE_VLYNQ1_INT 25
-+/* Line #26 Reserved */
-+/* Line #27 Reserved */
-+#define AVALANCHE_MAC1_INT 28
-+#define AVALANCHE_I2CM_INT 29
-+#define AVALANCHE_PDMA_INT2 30
-+#define AVALANCHE_PDMA_INT3 31
-+/* Line #32 Reserved */
-+/* Line #33 Reserved */
-+/* Line #34 Reserved */
-+/* Line #35 Reserved */
-+/* Line #36 Reserved */
-+#define AVALANCHE_VDMA_VT_RX_INT 37
-+#define AVALANCHE_VDMA_VT_TX_INT 38
-+#define AVALANCHE_ADSLSS_INT 39
++ len += sprintf(buf + len, "VLYNQ %d: Link state: %s\n",instance,link_msg[link_state]);
+
-+/*-----------------------------------*/
-+/* Sangam Secondary Interrupts */
-+/*-----------------------------------*/
-+#define PRIMARY_INTS 40
++ }
++ /* Print info about vlynq device 1 */
++
++ return len;
++}
+
-+#define EMIF_INT (7 + PRIMARY_INTS)
+
++/* Proc function to display driver version */
++static int
++vlynq_read_ver_proc(char *buf, char **start, off_t offset, int count, int *eof, void *data)
++{
++ int instance;
++ int len=0;
++
++ len += sprintf(buf +len,"\nTI Linux VLYNQ Driver Version %s\n",TI_VLYNQ_VERSION);
++ return len;
++}
+
-+extern void avalanche_int_set(int channel, int line);
+
+
-+#endif /* _AVALANCHE_INTC_H */
-diff -urN linux.old/include/asm-mips/ar7/avalanche_misc.h linux.dev/include/asm-mips/ar7/avalanche_misc.h
---- linux.old/include/asm-mips/ar7/avalanche_misc.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/include/asm-mips/ar7/avalanche_misc.h 2005-07-12 02:59:26.200667312 +0200
-@@ -0,0 +1,174 @@
-+#ifndef _AVALANCHE_MISC_H_
-+#define _AVALANCHE_MISC_H_
+
-+typedef enum AVALANCHE_ERR_t
++/* Wrapper for vlynq ISR */
++static void lnx_vlynq_root_isr(int irq, void * arg, struct pt_regs *regs)
+{
-+ AVALANCHE_ERR_OK = 0, /* OK or SUCCESS */
-+ AVALANCHE_ERR_ERROR = -1, /* Unspecified/Generic ERROR */
++ vlynq_root_isr(arg);
++}
+
-+ /* Pointers and args */
-+ AVALANCHE_ERR_INVARG = -2, /* Invaild argument to the call */
-+ AVALANCHE_ERR_NULLPTR = -3, /* NULL pointer */
-+ AVALANCHE_ERR_BADPTR = -4, /* Bad (out of mem) pointer */
++/* =================================== init and cleanup */
+
-+ /* Memory issues */
-+ AVALANCHE_ERR_ALLOC_FAIL = -10, /* allocation failed */
-+ AVALANCHE_ERR_FREE_FAIL = -11, /* free failed */
-+ AVALANCHE_ERR_MEM_CORRUPT = -12, /* corrupted memory */
-+ AVALANCHE_ERR_BUF_LINK = -13, /* buffer linking failed */
++int vlynq_init_module(void)
++{
++ int ret;
++ int unit = 0;
++ int instance_count = CONFIG_AR7_VLYNQ_PORTS;
++ volatile int *ptr;
+
-+ /* Device issues */
-+ AVALANCHE_ERR_DEVICE_TIMEOUT = -20, /* device timeout on read/write */
-+ AVALANCHE_ERR_DEVICE_MALFUNC = -21, /* device malfunction */
++ vlynq_dev_init();
+
-+ AVALANCHE_ERR_INVID = -30 /* Invalid ID */
++ DBGPRINT("Vlynq CONFIG_AR7_VLYNQ_PORTS=%d\n", CONFIG_AR7_VLYNQ_PORTS);
++ /* If num of configured vlynq ports > supported by driver return error */
++ if (instance_count > MAX_VLYNQ_PORTS)
++ {
++ ERRPRINT("ERROR: vlynq_init_module(): Max %d supported\n", MAX_VLYNQ_PORTS);
++ return (-1);
++ }
+
-+} AVALANCHE_ERR;
++ /* register the misc device */
++ for (unit = 0; unit < CONFIG_AR7_VLYNQ_PORTS; unit++)
++ {
++ ret = misc_register(&vlynq_dev[unit]);
++
++ if(ret < 0)
++ {
++ ERRPRINT("ERROR:Could not register vlynq device:%d\n",unit);
++ continue;
++ }
++ else
++ DBGPRINT("Vlynq Device %s registered with minor no %d as misc device. Result=%d\n",
++ vlynq_dev[unit].name, vlynq_dev[unit].minor, ret);
++#if 0
++
++ DBGPRINT("Calling vlynq init\n");
++
++ /* Read the global variable for VLYNQ device structure and initialize vlynq driver */
++ ret = vlynq_init(vlynq_priv[unit].vlynqDevice,VLYNQ_INIT_PERFORM_ALL );
++#endif
+
-+/*****************************************************************************
-+ * Reset Control Module
-+ *****************************************************************************/
++ if(vlynq_init_status[unit] == 0)
++ {
++ printk("VLYNQ %d : init failed\n",unit);
++ continue;
++ }
++
++ /* Check link before proceeding */
++ if (!vlynq_link_check(vlynq_priv[unit].vlynqDevice))
++ {
++ DBGPRINT("\nError: Vlynq link not available.trying once before Exiting");
++ }
++ else
++ {
++ DBGPRINT("Vlynq instance:%d Link UP\n",unit);
++
++ /* Install the vlynq local root ISR */
++ request_irq(vlynq_priv[unit].irq,lnx_vlynq_root_isr,0,vlynq_dev[unit].name,vlynq_priv[unit].vlynqDevice);
++ }
++ }
+
-+typedef enum AVALANCHE_RESET_MODULE_tag
-+{
-+ RESET_MODULE_UART0 = 0,
-+ RESET_MODULE_UART1 = 1,
-+ RESET_MODULE_I2C = 2,
-+ RESET_MODULE_TIMER0 = 3,
-+ RESET_MODULE_TIMER1 = 4,
-+ RESET_MODULE_GPIO = 6,
-+ RESET_MODULE_ADSLSS = 7,
-+ RESET_MODULE_USBS = 8,
-+ RESET_MODULE_SAR = 9,
-+ RESET_MODULE_VDMA_VT = 11,
-+ RESET_MODULE_FSER = 12,
-+ RESET_MODULE_VLYNQ1 = 16,
-+ RESET_MODULE_EMAC0 = 17,
-+ RESET_MODULE_DMA = 18,
-+ RESET_MODULE_BIST = 19,
-+ RESET_MODULE_VLYNQ0 = 20,
-+ RESET_MODULE_EMAC1 = 21,
-+ RESET_MODULE_MDIO = 22,
-+ RESET_MODULE_ADSLSS_DSP = 23,
-+ RESET_MODULE_EPHY = 26
-+} AVALANCHE_RESET_MODULE_T;
++ proc_mkdir("avalanche", NULL);
++ /* Creating proc entry for the devices */
++ create_proc_read_entry("avalanche/vlynq_link", 0, NULL, vlynq_read_link_proc, NULL);
++ create_proc_read_entry("avalanche/vlynq_ver", 0, NULL, vlynq_read_ver_proc, NULL);
++
++ return 0;
++}
+
-+typedef enum AVALANCHE_RESET_CTRL_tag
++void vlynq_cleanup_module(void)
+{
-+ IN_RESET = 0,
-+ OUT_OF_RESET
-+} AVALANCHE_RESET_CTRL_T;
++ int unit = 0;
++
++ for (unit = 0; unit < CONFIG_AR7_VLYNQ_PORTS; unit++)
++ {
++ DBGPRINT("vlynq_cleanup_module(): Unregistring misc device %s\n",vlynq_dev[unit].name);
++ misc_deregister(&vlynq_dev[unit]);
++ }
+
-+typedef enum AVALANCHE_SYS_RST_MODE_tag
-+{
-+ RESET_SOC_WITH_MEMCTRL = 1, /* SW0 bit in SWRCR register */
-+ RESET_SOC_WITHOUT_MEMCTRL = 2 /* SW1 bit in SWRCR register */
-+} AVALANCHE_SYS_RST_MODE_T;
++ remove_proc_entry("avalanche/vlynq_link", NULL);
++ remove_proc_entry("avalanche/vlynq_ver", NULL);
++}
+
-+typedef enum AVALANCHE_SYS_RESET_STATUS_tag
-+{
-+ HARDWARE_RESET = 0,
-+ SOFTWARE_RESET0, /* Caused by writing 1 to SW0 bit in SWRCR register */
-+ WATCHDOG_RESET,
-+ SOFTWARE_RESET1 /* Caused by writing 1 to SW1 bit in SWRCR register */
-+} AVALANCHE_SYS_RESET_STATUS_T;
+
-+AVALANCHE_RESET_CTRL_T avalanche_get_reset_status(AVALANCHE_RESET_MODULE_T reset_module);
-+void avalanche_sys_reset(AVALANCHE_SYS_RST_MODE_T mode);
-+AVALANCHE_SYS_RESET_STATUS_T avalanche_get_sys_last_reset_status(void);
++module_init(vlynq_init_module);
++module_exit(vlynq_cleanup_module);
++
+diff -urN linux.old/drivers/char/avalanche_vlynq/vlynq_hal.c linux.dev/drivers/char/avalanche_vlynq/vlynq_hal.c
+--- linux.old/drivers/char/avalanche_vlynq/vlynq_hal.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/char/avalanche_vlynq/vlynq_hal.c 2005-11-10 01:10:45.975582750 +0100
+@@ -0,0 +1,1214 @@
++/***************************************************************************
++**+----------------------------------------------------------------------+**
++**| **** |**
++**| **** |**
++**| ******o*** |**
++**| ********_///_**** |**
++**| ***** /_//_/ **** |**
++**| ** ** (__/ **** |**
++**| ********* |**
++**| **** |**
++**| *** |**
++**| |**
++**| Copyright (c) 2003 Texas Instruments Incorporated |**
++**| ALL RIGHTS RESERVED |**
++**| |**
++**| Permission is hereby granted to licensees of Texas Instruments |**
++**| Incorporated (TI) products to use this computer program for the sole |**
++**| purpose of implementing a licensee product based on TI products. |**
++**| No other rights to reproduce, use, or disseminate this computer |**
++**| program, whether in part or in whole, are granted. |**
++**| |**
++**| TI makes no representation or warranties with respect to the |**
++**| performance of this computer program, and specifically disclaims |**
++**| any responsibility for any damages, special or consequential, |**
++**| connected with the use of this program. |**
++**| |**
++**+----------------------------------------------------------------------+**
++***************************************************************************/
++
++/***************************************************************************
++ * ------------------------------------------------------------------------------
++ * Module : vlynq_hal.c
++ * Description : This file implements VLYNQ HAL API.
++ * ------------------------------------------------------------------------------
++ ***************************************************************************/
+
-+typedef int (*REMOTE_VLYNQ_DEV_RESET_CTRL_FN)(unsigned int reset_module, AVALANCHE_RESET_CTRL_T reset_ctrl);
++#include <linux/stddef.h>
++#include <linux/types.h>
++#include <asm/ar7/vlynq.h>
+
-+/*****************************************************************************
-+ * Power Control Module
-+ *****************************************************************************/
++/**** Local Function prototypes *******/
++static int vlynqInterruptInit(VLYNQ_DEV *pdev);
++static void vlynq_configClock(VLYNQ_DEV *pdev);
+
-+typedef enum AVALANCHE_POWER_CTRL_tag
-+{
-+ POWER_CTRL_POWER_UP = 0,
-+ POWER_CTRL_POWER_DOWN
-+} AVALANCHE_POWER_CTRL_T;
++/*** Second argument must be explicitly type casted to
++ * (VLYNQ_DEV*) inside the following functions */
++static void vlynq_local_module_isr(void *arg1, void *arg2, void *arg3);
++static void vlynq_remote_module_isr(void *arg1, void *arg2, void *arg3);
+
-+typedef enum AVALANCHE_SYS_POWER_MODE_tag
++
++volatile int vlynq_delay_value = 0;
++
++/* Code adopted from original vlynq driver */
++void vlynq_delay(unsigned int clktime)
+{
-+ GLOBAL_POWER_MODE_RUN = 0, /* All system is up */
-+ GLOBAL_POWER_MODE_IDLE, /* MIPS is power down, all peripherals working */
-+ GLOBAL_POWER_MODE_STANDBY, /* Chip in power down, but clock to ADSKL subsystem is running */
-+ GLOBAL_POWER_MODE_POWER_DOWN /* Total chip is powered down */
-+} AVALANCHE_SYS_POWER_MODE_T;
++ int i = 0;
++ volatile int *ptr = &vlynq_delay_value;
++ *ptr = 0;
+
-+void avalanche_power_ctrl(unsigned int power_module, AVALANCHE_POWER_CTRL_T power_ctrl);
-+AVALANCHE_POWER_CTRL_T avalanche_get_power_status(unsigned int power_module);
-+void avalanche_set_global_power_mode(AVALANCHE_SYS_POWER_MODE_T power_mode);
-+AVALANCHE_SYS_POWER_MODE_T avalanche_get_global_power_mode(void);
++ /* We are assuming that the each cycle takes about
++ * 23 assembly instructions. */
++ for(i = 0; i < (clktime + 23)/23; i++)
++ {
++ *ptr = *ptr + 1;
++ }
++}
+
-+/*****************************************************************************
-+ * Wakeup Control
-+ *****************************************************************************/
+
-+typedef enum AVALANCHE_WAKEUP_INTERRUPT_tag
++/* ----------------------------------------------------------------------------
++ * Function : vlynq_configClock()
++ * Description: Configures clock settings based on input parameters
++ * Adapted from original vlyna driver from Cable
++ */
++static void vlynq_configClock(VLYNQ_DEV * pdev)
+{
-+ WAKEUP_INT0 = 1,
-+ WAKEUP_INT1 = 2,
-+ WAKEUP_INT2 = 4,
-+ WAKEUP_INT3 = 8
-+} AVALANCHE_WAKEUP_INTERRUPT_T;
++ unsigned int tmp;
+
-+typedef enum TNETV1050_WAKEUP_CTRL_tag
++ switch( pdev->clk_source)
++ {
++ case VLYNQ_CLK_SOURCE_LOCAL: /* we output the clock, clk_div in range [1..8]. */
++ tmp = ((pdev->clk_div - 1) << 16) | VLYNQ_CTL_CLKDIR_MASK ;
++ VLYNQ_CTRL_REG = tmp;
++ VLYNQ_R_CTRL_REG = 0ul;
++ break;
++ case VLYNQ_CLK_SOURCE_REMOTE: /* we need to set the clock pin as input */
++ VLYNQ_CTRL_REG = 0ul;
++ tmp = ((pdev->clk_div - 1) << 16) | VLYNQ_CTL_CLKDIR_MASK ;
++ VLYNQ_R_CTRL_REG = tmp;
++ break;
++ default: /* do nothing about the clock, but clear other bits. */
++ tmp = ~(VLYNQ_CTL_CLKDIR_MASK | VLYNQ_CTL_CLKDIV_MASK);
++ VLYNQ_CTRL_REG &= tmp;
++ break;
++ }
++}
++
++ /* ----------------------------------------------------------------------------
++ * Function : vlynq_link_check()
++ * Description: This function checks the current VLYNQ for a link.
++ * An arbitrary amount of time is allowed for the link to come up .
++ * Returns 0 for "no link / failure " and 1 for "link available".
++ * -----------------------------------------------------------------------------
++ */
++unsigned int vlynq_link_check( VLYNQ_DEV * pdev)
+{
-+ WAKEUP_DISABLED = 0,
-+ WAKEUP_ENABLED
-+} AVALANCHE_WAKEUP_CTRL_T;
++ /*sleep for 64 cycles, allow link to come up*/
++ vlynq_delay(64);
++
++ /* check status register return OK if link is found. */
++ if (VLYNQ_STATUS_REG & VLYNQ_STS_LINK_MASK)
++ {
++ return 1; /* Link Available */
++ }
++ else
++ {
++ return 0; /* Link Failure */
++ }
++}
+
-+typedef enum TNETV1050_WAKEUP_POLARITY_tag
++/* ----------------------------------------------------------------------------
++ * Function : vlynq_init()
++ * Description: Initialization function accepting paramaters for VLYNQ module
++ * initialization. The Options bitmap decides what operations are performed
++ * as a part of initialization. The Input parameters are obtained through the
++ * sub fields of VLYNQ_DEV structure.
++ */
++
++int vlynq_init(VLYNQ_DEV *pdev, VLYNQ_INIT_OPTIONS options)
+{
-+ WAKEUP_ACTIVE_HIGH = 0,
-+ WAKEUP_ACTIVE_LOW
-+} AVALANCHE_WAKEUP_POLARITY_T;
++ unsigned int map;
++ unsigned int val=0,cnt,tmp;
++ unsigned int counter=0;
++ VLYNQ_INTERRUPT_CNTRL *intSetting=NULL;
++
++ /* validate arguments */
++ if( VLYNQ_OUTRANGE(pdev->clk_source, VLYNQ_CLK_SOURCE_REMOTE, VLYNQ_CLK_SOURCE_NONE) ||
++ VLYNQ_OUTRANGE(pdev->clk_div, 8, 1) )
++ {
++ return VLYNQ_INVALID_ARG;
++ }
++
++ /** perform all sanity checks first **/
++ if(pdev->state != VLYNQ_DRV_STATE_UNINIT)
++ return VLYNQ_INVALID_DRV_STATE;
+
-+void avalanche_wakeup_ctrl(AVALANCHE_WAKEUP_INTERRUPT_T wakeup_int,
-+ AVALANCHE_WAKEUP_CTRL_T wakeup_ctrl,
-+ AVALANCHE_WAKEUP_POLARITY_T wakeup_polarity);
++ /** Initialize local and remote register set addresses- additional
++ * provision to access the registers directly if need be */
++ pdev->local = (VLYNQ_REG_SET*)pdev->module_base;
++ pdev->remote = (VLYNQ_REG_SET*) (pdev->module_base + VLYNQ_REMOTE_REGS_OFFSET);
+
-+/*****************************************************************************
-+ * GPIO Control
-+ *****************************************************************************/
++ /* Detect faulty int configuration that might induce int pkt looping */
++ if ( (options & VLYNQ_INIT_LOCAL_INTERRUPTS) && (options & VLYNQ_INIT_REMOTE_INTERRUPTS) )
++ {
++ /* case when both local and remote are configured */
++ if((pdev->local_irq.intLocal== VLYNQ_INT_REMOTE ) /* interrupts transfered to remote from local */
++ && (pdev->remote_irq.intLocal== VLYNQ_INT_REMOTE) /* interrupts transfered from remote to local */
++ && ((pdev->local_irq.intRemote == VLYNQ_INT_ROOT_ISR) || (pdev->remote_irq.intRemote == VLYNQ_INT_ROOT_ISR)) )
++ {
++ return (VLYNQ_INT_CONFIG_ERR);
++ }
++ }
+
-+typedef enum AVALANCHE_GPIO_PIN_MODE_tag
-+{
-+ FUNCTIONAL_PIN = 0,
-+ GPIO_PIN = 1
-+} AVALANCHE_GPIO_PIN_MODE_T;
++ pdev->state = VLYNQ_DRV_STATE_ININIT;
++ pdev->intCount = 0;
++ pdev->isrCount = 0;
+
-+typedef enum AVALANCHE_GPIO_PIN_DIRECTION_tag
-+{
-+ GPIO_OUTPUT_PIN = 0,
-+ GPIO_INPUT_PIN = 1
-+} AVALANCHE_GPIO_PIN_DIRECTION_T;
++ /*** Its assumed that the vlynq module has been brought out of reset
++ * before invocation of vlynq_init. Since, this operation is board specific
++ * it must be handled outside this generic driver */
++
++ /* Assert reset the remote device, call reset_cb,
++ * reset CB holds Reset according to the device needs. */
++ VLYNQ_RESETCB(VLYNQ_RESET_ASSERT);
+
-+typedef enum { GPIO_FALSE, GPIO_TRUE } AVALANCHE_GPIO_BOOL_T;
++ /* Handle VLYNQ clock, HW default (Sense On Reset) is
++ * usually input for all the devices. */
++ if (options & VLYNQ_INIT_CONFIG_CLOCK)
++ {
++ vlynq_configClock(pdev);
++ }
++
++ /* Call reset_cb again. It will release the remote device
++ * from reset, and wait for a while. */
++ VLYNQ_RESETCB(VLYNQ_RESET_DEASSERT);
+
-+void avalanche_gpio_init(void);
-+int avalanche_gpio_ctrl(unsigned int gpio_pin,
-+ AVALANCHE_GPIO_PIN_MODE_T pin_mode,
-+ AVALANCHE_GPIO_PIN_DIRECTION_T pin_direction);
-+int avalanche_gpio_ctrl_with_link_count(unsigned int gpio_pin,
-+ AVALANCHE_GPIO_PIN_MODE_T pin_mode,
-+ AVALANCHE_GPIO_PIN_DIRECTION_T pin_direction);
-+int avalanche_gpio_out_bit(unsigned int gpio_pin, int value);
-+int avalanche_gpio_in_bit(unsigned int gpio_pin);
-+int avalanche_gpio_out_value(unsigned int out_val, unsigned int set_mask, unsigned int reg_index);
-+int avalanche_gpio_out_value_with_link_count(unsigned int out_val, unsigned int set_mask, unsigned int reg_index);
-+int avalanche_gpio_in_value(unsigned int *in_val, unsigned int reg_index);
++ if(options & VLYNQ_INIT_CHECK_LINK )
++ {
++ /* Check for link up during initialization*/
++ while( counter < 25 )
++ {
++ /* loop around giving a chance for link status to settle down */
++ counter++;
++ if(vlynq_link_check(pdev))
++ {
++ /* Link is up exit loop*/
++ break;
++ }
++
++ vlynq_delay(4000);
++ }/*end of while counter loop */
++
++ if(!vlynq_link_check(pdev))
++ {
++ /* Handle this case as abort */
++ pdev->state = VLYNQ_DRV_STATE_ERROR;
++ VLYNQ_RESETCB( VLYNQ_RESET_INITFAIL);
++ return VLYNQ_LINK_DOWN;
++ }/* end of if not vlynq_link_check conditional block */
++
++ }/*end of if options & VLYNQ_INIT_CHECK_LINK conditional block */
++
++
++ if (options & VLYNQ_INIT_LOCAL_MEM_REGIONS)
++ {
++ /* Initialise local memory regions . This initialization lets
++ * the local host access remote device memory regions*/
++ int i;
++
++ /* configure the VLYNQ portal window to a PHYSICAL
++ * address of the local CPU */
++ VLYNQ_ALIGN4(pdev->local_mem.Txmap);
++ VLYNQ_TXMAP_REG = (pdev->local_mem.Txmap);
++
++ /*This code assumes input parameter is itself a physical address */
++ for(i=0; i < VLYNQ_MAX_MEMORY_REGIONS ; i++)
++ {
++ /* Physical address on the remote */
++ map = i+1;
++ VLYNQ_R_RXMAP_SIZE_REG(map) = 0;
++ if( pdev->remote_mem.RxSize[i])
++ {
++ VLYNQ_ALIGN4(pdev->remote_mem.RxOffset[i]);
++ VLYNQ_ALIGN4(pdev->remote_mem.RxSize[i]);
++ VLYNQ_R_RXMAP_OFFSET_REG(map) = pdev->remote_mem.RxOffset[i];
++ VLYNQ_R_RXMAP_SIZE_REG(map) = pdev->remote_mem.RxSize[i];
++ }
++ }
++ }
+
-+unsigned int avalanche_get_chip_version_info(void);
++ if(options & VLYNQ_INIT_REMOTE_MEM_REGIONS )
++ {
++ int i;
++
++ /* Initialise remote memory regions. This initialization lets remote
++ * device access local host memory regions. It configures the VLYNQ portal
++ * window to a PHYSICAL address of the remote */
++ VLYNQ_ALIGN4(pdev->remote_mem.Txmap);
++ VLYNQ_R_TXMAP_REG = pdev->remote_mem.Txmap;
++
++ for( i=0; i<VLYNQ_MAX_MEMORY_REGIONS; i++)
++ {
++ /* Physical address on the local */
++ map = i+1;
++ VLYNQ_RXMAP_SIZE_REG(map) = 0;
++ if( pdev->local_mem.RxSize[i])
++ {
++ VLYNQ_ALIGN4(pdev->local_mem.RxOffset[i]);
++ VLYNQ_ALIGN4(pdev->local_mem.RxSize[i]);
++ VLYNQ_RXMAP_OFFSET_REG(map) = (pdev->local_mem.RxOffset[i]);
++ VLYNQ_RXMAP_SIZE_REG(map) = (pdev->local_mem.RxSize[i]);
++ }
++ }
++ }
+
-+unsigned int avalanche_get_vbus_freq(void);
-+void avalanche_set_vbus_freq(unsigned int);
++ /* Adapted from original vlynq driver from cable - Calculate VLYNQ bus width */
++ pdev->width = 3 + VLYNQ_STATUS_FLD_WIDTH(VLYNQ_STATUS_REG)
++ + VLYNQ_STATUS_FLD_WIDTH(VLYNQ_R_STATUS_REG);
++
++ /* chance to initialize the device, e.g. to boost VLYNQ
++ * clock by modifying pdev->clk_div or and verify the width. */
++ VLYNQ_RESETCB(VLYNQ_RESET_LINKESTABLISH);
+
++ /* Handle VLYNQ clock, HW default (Sense On Reset) is
++ * usually input for all the devices. */
++ if(options & VLYNQ_INIT_CONFIG_CLOCK )
++ {
++ vlynq_configClock(pdev);
++ }
+
-+typedef int (*SET_MDIX_ON_CHIP_FN_T)(unsigned int base_addr, unsigned int operation);
-+int avalanche_set_mdix_on_chip(unsigned int base_addr, unsigned int operation);
-+unsigned int avalanche_is_mdix_on_chip(void);
++ /* last check for link*/
++ if(options & VLYNQ_INIT_CHECK_LINK )
++ {
++ /* Final Check for link during initialization*/
++ while( counter < 25 )
++ {
++ /* loop around giving a chance for link status to settle down */
++ counter++;
++ if(vlynq_link_check(pdev))
++ {
++ /* Link is up exit loop*/
++ break;
++ }
++
++ vlynq_delay(4000);
++ }/*end of while counter loop */
++
++ if(!vlynq_link_check(pdev))
++ {
++ /* Handle this case as abort */
++ pdev->state = VLYNQ_DRV_STATE_ERROR;
++ VLYNQ_RESETCB( VLYNQ_RESET_INITFAIL);
++ return VLYNQ_LINK_DOWN;
++ }/* end of if not vlynq_link_check conditional block */
++
++ } /* end of if options & VLYNQ_INIT_CHECK_LINK */
+
-+#endif
-diff -urN linux.old/include/asm-mips/ar7/avalanche_regs.h linux.dev/include/asm-mips/ar7/avalanche_regs.h
---- linux.old/include/asm-mips/ar7/avalanche_regs.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/include/asm-mips/ar7/avalanche_regs.h 2005-07-12 02:59:26.201667160 +0200
-@@ -0,0 +1,567 @@
-+/*
-+ * $Id$
-+ * Avalanche Register Descriptions
-+ *
-+ * Jeff Harrell, jharrell@ti.com
-+ * 2000 (c) Texas Instruments Inc.
++ if(options & VLYNQ_INIT_LOCAL_INTERRUPTS )
++ {
++ /* Configure local interrupt settings */
++ intSetting = &(pdev->local_irq);
++
++ /* Map local module status interrupts to interrupt vector*/
++ val = intSetting->map_vector << VLYNQ_CTL_INTVEC_SHIFT ;
++
++ /* enable local module status interrupts */
++ val |= 0x01 << VLYNQ_CTL_INTEN_SHIFT;
++
++ if ( intSetting->intLocal == VLYNQ_INT_LOCAL )
++ {
++ /*set the intLocal bit*/
++ val |= 0x01 << VLYNQ_CTL_INTLOCAL_SHIFT;
++ }
++
++ /* Irrespective of whether interrupts are handled locally, program
++ * int2Cfg. Error checking for accidental loop(when intLocal=0 and int2Cfg=1
++ * i.e remote packets are set intPending register->which will result in
++ * same packet being sent out) has been done already
++ */
++
++ if (intSetting->intRemote == VLYNQ_INT_ROOT_ISR)
++ {
++ /* Set the int2Cfg register, so that remote interrupt
++ * packets are written to intPending register */
++ val |= 0x01 << VLYNQ_CTL_INT2CFG_SHIFT;
++
++ /* Set intPtr register to point to intPending register */
++ VLYNQ_INT_PTR_REG = VLYNQ_INT_PENDING_REG_PTR ;
++ }
++ else
++ {
++ /*set the interrupt pointer register*/
++ VLYNQ_INT_PTR_REG = intSetting->intr_ptr;
++ /* Dont bother to modify int2Cfg as it would be zero */
++ }
++
++ /** Clear bits related to INT settings in control register **/
++ VLYNQ_CTRL_REG = VLYNQ_CTRL_REG & (~VLYNQ_CTL_INTFIELDS_CLEAR_MASK);
++
++ /** Or the bits to be set with Control register **/
++ VLYNQ_CTRL_REG = VLYNQ_CTRL_REG | val;
++
++ /* initialise local ICB */
++ if(vlynqInterruptInit(pdev)==VLYNQ_MEMALLOC_FAIL)
++ return VLYNQ_MEMALLOC_FAIL;
++
++ /* Install handler for local module status interrupts. By default when
++ * local interrupt setting is initialised, the local module status are
++ * enabled and handler hooked up */
++ if(vlynq_install_isr(pdev, intSetting->map_vector, vlynq_local_module_isr,
++ pdev, NULL, NULL) == VLYNQ_INVALID_ARG)
++ return VLYNQ_INVALID_ARG;
++ } /* end of init local interrupts */
++
++ if(options & VLYNQ_INIT_REMOTE_INTERRUPTS )
++ {
++ /* Configure remote interrupt settings from configuration */
++ intSetting = &(pdev->remote_irq);
++
++ /* Map remote module status interrupts to remote interrupt vector*/
++ val = intSetting->map_vector << VLYNQ_CTL_INTVEC_SHIFT ;
++ /* enable remote module status interrupts */
++ val |= 0x01 << VLYNQ_CTL_INTEN_SHIFT;
++
++ if ( intSetting->intLocal == VLYNQ_INT_LOCAL )
++ {
++ /*set the intLocal bit*/
++ val |= 0x01 << VLYNQ_CTL_INTLOCAL_SHIFT;
++ }
++
++ /* Irrespective of whether interrupts are handled locally, program
++ * int2Cfg. Error checking for accidental loop(when intLocal=0 and int2Cfg=1
++ * i.e remote packets are set intPending register->which will result in
++ * same packet being sent out) has been done already
++ */
++
++ if (intSetting->intRemote == VLYNQ_INT_ROOT_ISR)
++ {
++ /* Set the int2Cfg register, so that remote interrupt
++ * packets are written to intPending register */
++ val |= 0x01 << VLYNQ_CTL_INT2CFG_SHIFT;
++ /* Set intPtr register to point to intPending register */
++ VLYNQ_R_INT_PTR_REG = VLYNQ_R_INT_PENDING_REG_PTR ;
++ }
++ else
++ {
++ /*set the interrupt pointer register*/
++ VLYNQ_R_INT_PTR_REG = intSetting->intr_ptr;
++ /* Dont bother to modify int2Cfg as it would be zero */
++ }
++
++ if( (intSetting->intLocal == VLYNQ_INT_REMOTE) &&
++ (options & VLYNQ_INIT_LOCAL_INTERRUPTS) &&
++ (pdev->local_irq.intRemote == VLYNQ_INT_ROOT_ISR) )
++ {
++ /* Install handler for remote module status interrupts. By default when
++ * remote interrupts are forwarded to local root_isr then remote_module_isr is
++ * enabled and handler hooked up */
++ if(vlynq_install_isr(pdev,intSetting->map_vector,vlynq_remote_module_isr,
++ pdev, NULL, NULL) == VLYNQ_INVALID_ARG)
++ return VLYNQ_INVALID_ARG;
++ }
++
++
++ /** Clear bits related to INT settings in control register **/
++ VLYNQ_R_CTRL_REG = VLYNQ_R_CTRL_REG & (~VLYNQ_CTL_INTFIELDS_CLEAR_MASK);
++
++ /** Or the bits to be set with the remote Control register **/
++ VLYNQ_R_CTRL_REG = VLYNQ_R_CTRL_REG | val;
++
++ } /* init remote interrupt settings*/
++
++ if(options & VLYNQ_INIT_CLEAR_ERRORS )
++ {
++ /* Clear errors during initialization */
++ tmp = VLYNQ_STATUS_REG & (VLYNQ_STS_RERROR_MASK | VLYNQ_STS_LERROR_MASK);
++ VLYNQ_STATUS_REG = tmp;
++ tmp = VLYNQ_R_STATUS_REG & (VLYNQ_STS_RERROR_MASK | VLYNQ_STS_LERROR_MASK);
++ VLYNQ_R_STATUS_REG = tmp;
++ }
++
++ /* clear int status */
++ val = VLYNQ_INT_STAT_REG;
++ VLYNQ_INT_STAT_REG = val;
++
++ /* finish initialization */
++ pdev->state = VLYNQ_DRV_STATE_RUN;
++ VLYNQ_RESETCB( VLYNQ_RESET_INITOK);
++ return VLYNQ_SUCCESS;
++
++}
++
++
++/* ----------------------------------------------------------------------------
++ * Function : vlynqInterruptInit()
++ * Description: This local function is used to set up the ICB table for the
++ * VLYNQ_STATUS_REG vlynq module. The input parameter "pdev" points the vlynq
++ * device instance whose ICB is allocated.
++ * Return : returns VLYNQ_SUCCESS or vlynq error for failure
++ * -----------------------------------------------------------------------------
+ */
++static int vlynqInterruptInit(VLYNQ_DEV *pdev)
++{
++ int i, numslots;
+
-+#ifndef __AVALANCHE_REGS_H
-+#define __AVALANCHE_REGS_H
++ /* Memory allocated statically.
++ * Initialise ICB,free list.Indicate primary slot empty.
++ * Intialise intVector <==> map_vector translation table*/
++ for(i=0; i < VLYNQ_NUM_INT_BITS; i++)
++ {
++ pdev->pIntrCB[i].isr = NULL;
++ pdev->pIntrCB[i].next = NULL; /*nothing chained */
++ pdev->vector_map[i] = -1; /* indicates unmapped */
++ }
+
-+#include <asm/addrspace.h>
-+#include <linux/config.h>
++ /* In the ICB slots, [VLYNQ_NUM_INT_BITS i.e 32 to ICB array size) are expansion slots
++ * required only when interrupt chaining/sharing is supported. In case
++ * of chained interrupts the list starts from primary slot and the
++ * additional slots are obtained from the common free area */
+
-+/*----------------------------------------*/
-+/* Base offsets within the Avalanche ASIC */
-+/*----------------------------------------*/
++ /* Initialise freelist */
+
-+#define BBIF_SPACE0 (KSEG1ADDR(0x01000000))
-+#define BBIF_SPACE1 (KSEG1ADDR(0x01800000))
-+#define BBIF_CONTROL (KSEG1ADDR(0x02000000))
-+#define ATM_SAR_BASE (KSEG1ADDR(0x03000000))
-+#define USB_MCU_BASE (KSEG1ADDR(0x03400000))
-+#define DES_BASE (KSEG1ADDR(0x08600000))
-+#define ETH_MACA_BASE (KSEG1ADDR(0x08610000))
-+#define ETH_MACB_BASE (KSEG1ADDR(0x08612800))
-+#define MEM_CTRLR_BASE (KSEG1ADDR(0x08610800))
-+#define GPIO_BASE (KSEG1ADDR(0x08610900))
-+#define CLK_CTRL_BASE (KSEG1ADDR(0x08610A00))
-+#define WATCH_DOG_BASE (KSEG1ADDR(0x08610B00))
-+#define TMR1_BASE (KSEG1ADDR(0x08610C00))
-+#define TRM2_BASE (KSEG1ADDR(0x08610D00))
-+#define UARTA_BASE (KSEG1ADDR(0x08610E00))
-+#define UARTB_BASE (KSEG1ADDR(0x08610F00))
-+#define I2C_BASE (KSEG1ADDR(0x08611000))
-+#define DEV_ID_BASE (KSEG1ADDR(0x08611100))
-+#define USB_BASE (KSEG1ADDR(0x08611200))
-+#define PCI_CONFIG_BASE (KSEG1ADDR(0x08611300))
-+#define DMA_BASE (KSEG1ADDR(0x08611400))
-+#define RESET_CTRL_BASE (KSEG1ADDR(0x08611600))
-+#define DSL_IF_BASE (KSEG1ADDR(0x08611B00))
-+#define INT_CTL_BASE (KSEG1ADDR(0x08612400))
-+#define PHY_BASE (KSEG1ADDR(0x1E000000))
++ numslots = VLYNQ_NUM_INT_BITS + VLYNQ_IVR_CHAIN_SLOTS;
++
++ if (numslots > VLYNQ_NUM_INT_BITS)
++ {
++ pdev->freelist = &(pdev->pIntrCB[VLYNQ_NUM_INT_BITS]);
++
++ for(i = VLYNQ_NUM_INT_BITS; i < (numslots-1) ; i++)
++ {
++ pdev->pIntrCB[i].next = &(pdev->pIntrCB[i+1]);
++ pdev->pIntrCB[i].isr = NULL;
++ }
++ pdev->pIntrCB[i].next=NULL; /* Indicate end of freelist*/
++ pdev->pIntrCB[i].isr=NULL;
++ }
++ else
++ {
++ pdev->freelist = NULL;
++ }
+
-+/*---------------------------------*/
-+/* Device ID, chip version number */
-+/*---------------------------------*/
++ /** Reset mapping for IV 0-7 **/
++ VLYNQ_IVR_03TO00_REG = 0;
++ VLYNQ_IVR_07TO04_REG = 0;
+
-+#define AVALANCHE_CHVN (*(volatile unsigned int *)(DEV_ID_BASE+0x14))
-+#define AVALANCHE_DEVID1 (*(volatile unsigned int *)(DEV_ID_BASE+0x18))
-+#define AVALANCHE_DEVID2 (*(volatile unsigned int *)(DEV_ID_BASE+0x1C))
++ return VLYNQ_SUCCESS;
++}
+
-+/*----------------------------------*/
-+/* Reset Control VW changed to ptrs */
-+/*----------------------------------*/
++/** remember that hooking up of root ISR handler with the interrupt controller
++ * is not done as a part of this driver. Typically, it must be done after
++ * invoking vlynq_init*/
+
-+#define AVALANCHE_PRCR (*(volatile unsigned int *)(RESET_CTRL_BASE + 0x0)) /* Peripheral reset control */
-+#define AVALANCHE_SWRCR (*(volatile unsigned int *)(RESET_CTRL_BASE + 0x4)) /* Software reset control */
-+#define AVALANCHE_RSR (*(volatile unsigned int *)(RESET_CTRL_BASE + 0x8)) /* Reset status register */
+
-+/* reset control bits */
++ /* ----------------------------------------------------------------------------
++ * ISR with the SOC interrupt controller. This ISR typically scans
++ * the Int PENDING/SET register in the VLYNQ module and calls the
++ * appropriate ISR associated with the correponding vector number.
++ * -----------------------------------------------------------------------------
++ */
++void vlynq_root_isr(void *arg)
++{
++ int source; /* Bit position of pending interrupt, start from 0 */
++ unsigned int interrupts, clrInterrupts;
++ VLYNQ_DEV * pdev;
++ VLYNQ_INTR_CNTRL_ICB *entry;
+
-+#define AV_RST_UART0 (1<<0) /* Brings UART0 out of reset */
-+#define AV_RST_UART1 (1<<1) /* Brings UART1 out of reset */
-+#define AV_RST_IICM (1<<2) /* Brings the I2CM out of reset */
-+#define AV_RST_TIMER0 (1<<3) /* Brings Timer 0 out of reset */
-+#define AV_RST_TIMER1 (1<<4) /* Brings Timer 1 out of reset */
-+#define AV_RST_DES (1<<5) /* Brings the DES module out of reset */
-+#define AV_RST_GPIO (1<<6) /* Brings the GPIO module out of reset (see note below) */
-+/*
-+ JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE
-+ If you reset the GPIO interface all of the directions (i/o) of the UART B
-+ interface pins are inputs and must be reconfigured so as not to lose the
-+ serial console interface
-+ JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE
-+*/
-+#define AV_RST_BBIF (1<<7) /* Brings the Broadband interface out of reset */
-+#define AV_RST_USB (1<<8) /* Brings the USB module out of reset */
-+#define AV_RST_SAR (1<<9) /* Brings the SAR out of reset */
-+#define AV_RST_HDLC (1<<10) /* Brings the HDLC module out of reset */
-+#define AV_RST_PCI (1<<16) /* Brings the PCI module out of reset */
-+#define AV_RST_ETH_MAC0 (1<<17) /* Brings the Ethernet MAC0 out of reset */
-+#define AV_RST_PICO_DMA (1<<18) /* Brings the PICO DMA module out of reset */
-+#define AV_RST_BIST (1<<19) /* Brings the BIST module out of reset */
-+#define AV_RST_DSP (1<<20) /* Brings the DSP sub system out of reset */
-+#define AV_RST_ETH_MAC1 (1<<21) /* Brings the Ethernet MAC1 out of reset */
++ pdev=(VLYNQ_DEV*)(arg); /*obtain the vlynq device pointer*/
++
++ interrupts = VLYNQ_INT_STAT_REG; /* Get the list of pending interrupts */
++ VLYNQ_INT_STAT_REG = interrupts; /* clear the int CR register */
++ clrInterrupts = interrupts; /* save them for further analysis */
+
-+/*----------------------*/
-+/* Physical interfaces */
-+/*----------------------*/
++ debugPrint("vlynq_root_isr: dev %u. INTCR = 0x%08lx\n", pdev->dev_idx, clrInterrupts,0,0,0,0);
+
-+/* Phy loopback */
-+#define PHY_LOOPBACK 1
++ /* Scan interrupt bits */
++ source =0;
++ while( clrInterrupts != 0)
++ {
++ /* test if bit is set? */
++ if( 0x1ul & clrInterrupts)
++ {
++ entry = &(pdev->pIntrCB[source]); /* Get the ISR entry */
++ pdev->intCount++; /* update interrupt count */
++ if(entry->isr != NULL)
++ {
++ do
++ {
++ pdev->isrCount++; /* update isr invocation count */
++ /* Call the user ISR and update the count for ISR */
++ entry->isrCount++;
++ entry->isr(entry->arg1, entry->arg2, entry->arg3);
++ if (entry->next == NULL) break;
++ entry = entry->next;
++
++ } while (entry->isr != NULL);
++ }
++ else
++ {
++ debugPrint(" ISR not installed for vlynq vector:%d\n",source,0,0,0,0,0);
++ }
++ }
++ clrInterrupts >>= 1; /* Next source bit */
++ ++source;
++ } /* endWhile clrInterrupts != 0 */
++}
+
+
-+/* Phy 0 */
-+#define PHY0BASE (PHY_BASE)
-+#define PHY0RST (*(volatile unsigned char *) (PHY0BASE)) /* reset */
-+#define PHY0CTRL (*(volatile unsigned char *) (PHY0BASE+0x5)) /* control */
-+#define PHY0RACPCTRL (*(volatile unsigned char *) (PHY0BASE+0x50)) /* RACP control/status */
-+#define PHY0TACPCTRL (*(volatile unsigned char *) (PHY0BASE+0x60)) /* TACP idle/unassigned cell hdr */
-+#define PHY0RACPINT (*(volatile unsigned char *) (PHY0BASE+0x51)) /* RACP interrupt enable/Status */
++ /* ----------------------------------------------------------------------------
++ * Function : vlynq_local__module_isr()
++ * Description: This ISR is attached to the local VLYNQ interrupt vector
++ * by the Vlynq Driver when local interrupts are being handled. i.e.
++ * intLocal=1. This ISR handles local Vlynq module status interrupts only
++ * AS a part of this ISR, user callback in VLYNQ_DEV structure
++ * is invoked.
++ * VLYNQ_DEV is passed as arg1. arg2 and arg3 are unused.
++ * -----------------------------------------------------------------------------
++ */
++static void vlynq_local_module_isr(void *arg1,void *arg2, void *arg3)
++{
++ VLYNQ_REPORT_CB func;
++ unsigned int dwStatRegVal;
++ VLYNQ_DEV * pdev;
+
++ pdev = (VLYNQ_DEV*) arg1;
++ /* Callback function is read from the device pointer that is passed as an argument */
++ func = pdev->report_cb;
+
-+/* Phy 1 */
++ /* read local status register */
++ dwStatRegVal = VLYNQ_STATUS_REG;
+
-+#define PHY1BASE (PHY_BASE + 0x100000)
-+#define PHY1RST (*(volatile unsigned char *) (PHY1BASE)) /* reset */
-+#define PHY1CTRL (*(volatile unsigned char *) (PHY1BASE+0x5)) /* control */
-+#define PHY1RACPCTRL (*(volatile unsigned char *) (PHY1BASE+0x50))
-+#define PHY1TACPCTRL (*(volatile unsigned char *) (PHY1BASE+0x60))
-+#define PHY1RACPINT (*(volatile unsigned char *) (PHY1BASE+0x51))
++ /* clear pending events */
++ VLYNQ_STATUS_REG = dwStatRegVal;
++
++ /* invoke user callback */
++ if( func != NULL)
++ func( pdev, VLYNQ_LOCAL_DVC, dwStatRegVal);
+
-+/* Phy 2 */
++}
+
-+#define PHY2BASE (PHY_BASE + 0x200000)
-+#define PHY2RST (*(volatile unsigned char *) (PHY2BASE)) /* reset */
-+#define PHY2CTRL (*(volatile unsigned char *) (PHY2BASE+0x5)) /* control */
-+#define PHY2RACPCTRL (*(volatile unsigned char *) (PHY2BASE+0x50))
-+#define PHY2TACPCTRL (*(volatile unsigned char *) (PHY2BASE+0x60))
-+#define PHY2RACPINT (*(volatile unsigned char *) (PHY2BASE+0x51))
++ /* ----------------------------------------------------------------------------
++ * Function : vlynq_remote_module_isr()
++ * Description: This ISR is attached to the remote VLYNQ interrupt vector
++ * by the Vlynq Driver when remote interrupts are being handled locally. i.e.
++ * intLocal=1. This ISR handles local Vlynq module status interrupts only
++ * AS a part of this ISR, user callback in VLYNQ_DEV structure
++ * is invoked.
++ * The parameters irq,regs ar unused.
++ * -----------------------------------------------------------------------------
++ */
++static void vlynq_remote_module_isr(void *arg1,void *arg2, void *arg3)
++{
++ VLYNQ_REPORT_CB func;
++ unsigned int dwStatRegVal;
++ VLYNQ_DEV * pdev;
+
-+/*-------------------*/
-+/* Avalanche ATM SAR */
-+/*-------------------*/
++
++ pdev = (VLYNQ_DEV*) arg1;
++
++ /* Callback function is read from the device pointer that is passed as an argument */
++ func = pdev->report_cb;
+
-+#define AVSAR_SYSCONFIG (*(volatile unsigned int*)(ATM_SAR_BASE+0x00000000)) /* SAR system config register */
-+#define AVSAR_SYSSTATUS (*(volatile unsigned int*)(ATM_SAR_BASE+0x00000004)) /* SAR system status register */
-+#define AVSAR_INT_ENABLE (*(volatile unsigned int*)(ATM_SAR_BASE+0x00000008)) /* SAR interrupt enable register */
-+#define AVSAR_CONN_VPI_VCI (*(volatile unsigned int*)(ATM_SAR_BASE+0x0000000c)) /* VPI/VCI connection config */
-+#define AVSAR_CONN_CONFIG (*(volatile unsigned int*)(ATM_SAR_BASE+0x00000010)) /* Connection config register */
-+#define AVSAR_OAM_CONFIG (*(volatile unsigned int*)(ATM_SAR_BASE+0x00000018)) /* OAM configuration register */
++ /* read local status register */
++ dwStatRegVal = VLYNQ_R_STATUS_REG;
+
-+/* Transmit completion ring registers */
++ /* clear pending events */
++ VLYNQ_R_STATUS_REG = dwStatRegVal;
+
-+#define AVSAR_TCRAPTR (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000100))
-+#define AVSAR_TCRASIZE (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000104))
-+#define AVSAR_TCRAINTTHRESH (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000108))
-+#define AVSAR_TCRATOTENT (*(volatile unsigned int *)(ATM_SAR_BASE+0x0000010c))
-+#define AVSAR_TCRAFREEENT (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000110))
-+#define AVSAR_TCRAPENDENT (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000114))
-+#define AVSAR_TCRAENTINC (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000118))
-+#define AVSAR_TCRBPTR (*(volatile unsigned int *)(ATM_SAR_BASE+0x0000011c))
-+#define AVSAR_TCRBSIZE (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000120))
-+#define AVSAR_TCRBINTTHRESH (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000124))
-+#define AVSAR_TCRBTOTENT (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000128))
-+#define AVSAR_TCRBFREEENT (*(volatile unsigned int *)(ATM_SAR_BASE+0x0000012c))
-+#define AVSAR_TCRBPENDENT (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000130))
-+#define AVSAR_TCRBENTINC (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000134))
++ /* invoke user callback */
++ if( func != NULL)
++ func( pdev, VLYNQ_REMOTE_DVC, dwStatRegVal);
+
-+/* Transmit Queue Packet registers */
-+#define AVSAR_TXQUEUE_PKT0 (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000140))
-+#define AVSAR_TXQUEUE_PKT1 (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000144))
-+#define AVSAR_TXQUEUE_PKT2 (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000148))
-+#define AVSAR_TX_FLUSH (*(volatile unsigned int *)(ATM_SAR_BASE+0x0000014C))
-+/* Receive completion ring registers */
++}
+
-+#define AVSAR_RCRAPTR (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000200))
-+#define AVSAR_RCRASIZE (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000204))
-+#define AVSAR_RCRAINTTHRESH (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000208))
-+#define AVSAR_RCRATOTENT (*(volatile unsigned int *)(ATM_SAR_BASE+0x0000020c))
-+#define AVSAR_RCRAFREEENT (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000210))
-+#define AVSAR_RCRAPENDENT (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000214))
-+#define AVSAR_RCRAENTINC (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000218))
-+#define AVSAR_RCRBPTR (*(volatile unsigned int *)(ATM_SAR_BASE+0x0000021c))
-+#define AVSAR_RCRBSIZE (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000220))
-+#define AVSAR_RCRBINTTHRESH (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000224))
-+#define AVSAR_RCRBTOTENT (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000228))
-+#define AVSAR_RCRBFREEENT (*(volatile unsigned int *)(ATM_SAR_BASE+0x0000022c))
-+#define AVSAR_RCRBPENDENT (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000230))
-+#define AVSAR_RCRBENTINC (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000234))
++/* ----------------------------------------------------------------------------
++ * Function : vlynq_interrupt_get_count()
++ * Description: This function returns the number of times a particular intr
++ * has been invoked.
++ *
++ * It returns 0, if erroneous map_vector is specified or if the corres isr
++ * has not been registered with VLYNQ.
++ */
++unsigned int vlynq_interrupt_get_count(VLYNQ_DEV *pdev,
++ unsigned int map_vector)
++{
++ VLYNQ_INTR_CNTRL_ICB *entry;
++ unsigned int count = 0;
+
-+#define AVSAR_RXFBL_ADD0 (*(volatile unsigned int*)(ATM_SAR_BASE+0x00000240)) /* Rx Free buffer list add 0 */
-+#define AVSAR_RXFBL_ADD1 (*(volatile unsigned int*)(ATM_SAR_BASE+0x00000244)) /* Rx Free buffer list add 1 */
-+#define AVSAR_RXFBL_ADD2 (*(volatile unsigned int*)(ATM_SAR_BASE+0x00000248)) /* Rx Free buffer list add 2 */
-+#define AVSAR_RXFBLSIZE_0 (*(volatile unsigned int*)(ATM_SAR_BASE+0x0000028c)) /* Rx Free buffer list size 0 */
-+#define AVSAR_RXFBLSIZE_1 (*(volatile unsigned int*)(ATM_SAR_BASE+0x0000029c)) /* Rx Free buffer list size 1 */
-+#define AVSAR_RXFBLSIZE_2 (*(volatile unsigned int*)(ATM_SAR_BASE+0x000002ac)) /* Rx Free buffer list size 2 */
-+#define AVSAR_RXFBLSIZE_3 (*(volatile unsigned int*)(ATM_SAR_BASE+0x000002bc)) /* Rx Free buffer list size 3 */
++ if (map_vector > (VLYNQ_NUM_INT_BITS-1))
++ return count;
++
++ entry = &(pdev->pIntrCB[map_vector]);
+
++ if (entry)
++ count = entry->isrCount;
+
-+#if defined(CONFIG_MIPS_EVM3D) || defined(CONFIG_MIPS_AR5D01) || defined(CONFIG_MIPS_AR5W01)
++ return (count);
++}
+
-+#define AVSAR_SAR_FREQUENCY (*(volatile unsigned int*)(ATM_SAR_BASE+0x00010480))
-+#define AVSAR_OAM_CC_SINK (*(volatile unsigned int*)(ATM_SAR_BASE+0x00010484))
-+#define AVSAR_OAM_AIS_RDI_RX (*(volatile unsigned int*)(ATM_SAR_BASE+0x00010488))
-+#define AVSAR_OAM_CPID0 (*(volatile unsigned int*)(ATM_SAR_BASE+0x000104E0))
-+#define AVSAR_OAM_LLID0 (*(volatile unsigned int*)(ATM_SAR_BASE+0x000104F0))
-+#define AVSAR_OAM_CPID1 (*(volatile unsigned int*)(ATM_SAR_BASE+0x000104E4))
-+#define AVSAR_OAM_LLID1 (*(volatile unsigned int*)(ATM_SAR_BASE+0x000104F4))
-+#define AVSAR_OAM_CPID2 (*(volatile unsigned int*)(ATM_SAR_BASE+0x000104E8))
-+#define AVSAR_OAM_LLID2 (*(volatile unsigned int*)(ATM_SAR_BASE+0x000104F8))
-+#define AVSAR_OAM_CPID3 (*(volatile unsigned int*)(ATM_SAR_BASE+0x000104EC))
-+#define AVSAR_OAM_LLID3 (*(volatile unsigned int*)(ATM_SAR_BASE+0x000104FC))
-+#define AVSAR_OAM_CORR_TAG (*(volatile unsigned int*)(ATM_SAR_BASE+0x00010500))
-+#define AVSAR_OAM_FAR_COUNT (*(volatile unsigned int*)(ATM_SAR_BASE+0x00010520))
-+#define AVSAR_OAM_NEAR_COUNT (*(volatile unsigned int*)(ATM_SAR_BASE+0x00010540))
-+#define AVSAR_OAM_CONFIG_REG (*(volatile unsigned int*)(ATM_SAR_BASE+0x00000018))
-+#define AVSAR_FAIRNESS_REG (*(volatile unsigned int*)(ATM_SAR_BASE+0x000104B8))
-+#define AVSAR_UBR_PCR_REG (*(volatile unsigned int*)(ATM_SAR_BASE+0x00010490))
+
++/* ----------------------------------------------------------------------------
++ * Function : vlynq_install_isr()
++ * Description: This function installs ISR for Vlynq interrupt vector
++ * bits(in IntPending register). This function should be used only when
++ * Vlynq interrupts are being handled locally(remote may be programmed to send
++ * interrupt packets).Also, the int2cfg should be 1 and the least significant
++ * 8 bits of the Interrupt Pointer Register must point to Interrupt
++ * Pending/Set Register).
++ * If host int2cfg=0 and the Interrupt Pointer register contains
++ * the address of the interrupt set register in the interrupt controller
++ * module of the local device , then the ISR for the remote interrupt must be
++ * directly registered with the Interrupt controller and must not use this API
++ * Note: this function simply installs the ISR in ICB It doesnt modify
++ * any register settings
++ */
++int
++vlynq_install_isr(VLYNQ_DEV *pdev,
++ unsigned int map_vector,
++ VLYNQ_INTR_CNTRL_ISR isr,
++ void *arg1, void *arg2, void *arg3)
++{
++ VLYNQ_INTR_CNTRL_ICB *entry;
+
-+/*
++ if ( (map_vector > (VLYNQ_NUM_INT_BITS-1)) || (isr == NULL) )
++ return VLYNQ_INVALID_ARG;
++
++ entry = &(pdev->pIntrCB[map_vector]);
+
-+#define OAM_CPID_ADD 0xa30104e0
++ if(entry->isr == NULL)
++ {
++ entry->isr = isr;
++ entry->arg1 = arg1;
++ entry->arg2 = arg2;
++ entry->arg3 = arg3;
++ entry->next = NULL;
++ }
++ else
++ {
++ /** No more empty slots,return error */
++ if(pdev->freelist == NULL)
++ return VLYNQ_MEMALLOC_FAIL;
++
++ while(entry->next != NULL)
++ {
++ entry = entry->next;
++ }
++
++ /* Append new node to the chain */
++ entry->next = pdev->freelist;
++ /* Remove the appended node from freelist */
++ pdev->freelist = pdev->freelist->next;
++ entry= entry->next;
++
++ /*** Set the ICB fields ***/
++ entry->isr = isr;
++ entry->arg1 = arg1;
++ entry->arg2 = arg2;
++ entry->arg3 = arg3;
++ entry->next = NULL;
++ }
++
++ return VLYNQ_SUCCESS;
++}
+
-+#define OAM_LLID_ADD 0xa30104f0
+
-+#define OAM_LLID_VAL 0xffffffff
+
-+#define OAM_CORR_TAG 0xa3010500
++/* ----------------------------------------------------------------------------
++ * Function : vlynq_uninstall_isr
++ * Description: This function is used to uninstall a previously
++ * registered ISR. In case of shared/chained interrupts, the
++ * void * arg parameter must uniquely identify the ISR to be
++ * uninstalled.
++ * Note: this function simply uninstalls the ISR in ICB
++ * It doesnt modify any register settings
++ */
++int
++vlynq_uninstall_isr(VLYNQ_DEV *pdev,
++ unsigned int map_vector,
++ void *arg1, void *arg2, void *arg3)
++{
++ VLYNQ_INTR_CNTRL_ICB *entry,*temp;
+
-+#define OAM_FAR_COUNT_ADD 0xa3010520
++ if (map_vector > (VLYNQ_NUM_INT_BITS-1))
++ return VLYNQ_INVALID_ARG;
++
++ entry = &(pdev->pIntrCB[map_vector]);
+
-+#define OAM_NEAR_COUNT_ADD 0xa3010540
++ if(entry->isr == NULL )
++ return VLYNQ_ISR_NON_EXISTENT;
+
-+#define OAM_CONFIG_REG_ADD 0xa3000018
-+*/
++ if ( (entry->arg1 == arg1) && (entry->arg2 == arg2) && (entry->arg3 == arg3) )
++ {
++ if(entry->next == NULL)
++ {
++ entry->isr=NULL;
++ return VLYNQ_SUCCESS;
++ }
++ else
++ {
++ temp = entry->next;
++ /* Copy next node in the chain to prim.slot */
++ entry->isr = temp->isr;
++ entry->arg1 = temp->arg1;
++ entry->arg2 = temp->arg2;
++ entry->arg3 = temp->arg3;
++ entry->next = temp->next;
++ /* Free the just copied node */
++ temp->isr = NULL;
++ temp->arg1 = NULL;
++ temp->arg2 = NULL;
++ temp->arg3 = NULL;
++ temp->next = pdev->freelist;
++ pdev->freelist = temp;
++ return VLYNQ_SUCCESS;
++ }
++ }
++ else
++ {
++ temp = entry;
++ while ( (entry = temp->next) != NULL)
++ {
++ if ( (entry->arg1 == arg1) && (entry->arg2 == arg2) && (entry->arg3 == arg3) )
++ {
++ /* remove node from chain */
++ temp->next = entry->next;
++ /* Add the removed node to freelist */
++ entry->isr = NULL;
++ entry->arg1 = NULL;
++ entry->arg2 = NULL;
++ entry->arg3 = NULL;
++ entry->next = pdev->freelist;
++ entry->isrCount = 0;
++ pdev->freelist = entry;
++ return VLYNQ_SUCCESS;
++ }
++ temp = entry;
++ }
++
++ return VLYNQ_ISR_NON_EXISTENT;
++ }
++}
+
+
-+#else /* CONFIG_MIPS_EVM3 || CONFIG_MIPS_ACPEP */
+
-+#define AVSAR_SAR_FREQUENCY (*(volatile unsigned int*)(ATM_SAR_BASE+0x00012000))
-+#define AVSAR_OAM_CC_SINK (*(volatile unsigned int*)(ATM_SAR_BASE+0x00012004))
-+#define AVSAR_OAM_AIS_RDI_RX (*(volatile unsigned int*)(ATM_SAR_BASE+0x00012008))
-+#define AVSAR_OAM_CPID (*(volatile unsigned int*)(ATM_SAR_BASE+0x00012300))
+
-+#endif /* CONFIG_MIPS_EVM3D || CONFIG_MIPS_AR5D01 || CONFIG_MIPS_AR5W01 */
++/* ----------------------------------------------------------------------------
++ * function : vlynq_interrupt_vector_set()
++ * description:configures interrupt vector mapping,interrupt type
++ * polarity -all in one go.
++ */
++int
++vlynq_interrupt_vector_set(VLYNQ_DEV *pdev, /* vlynq device */
++ unsigned int int_vector, /* int vector on vlynq device */
++ unsigned int map_vector, /* bit for this interrupt */
++ VLYNQ_DEV_TYPE dev_type, /* local or remote device */
++ VLYNQ_INTR_POLARITY pol, /* polarity of interrupt */
++ VLYNQ_INTR_TYPE type) /* pulsed/level interrupt */
++{
++ volatile unsigned int * vecreg;
++ unsigned int val=0;
++ unsigned int bytemask=0XFF;
+
++ /* use the lower 8 bits of val to set the value , shift it to
++ * appropriate byte position in the ivr and write it to the
++ * corresponding register */
+
-+#define AVSAR_STATE_RAM (ATM_SAR_BASE + 0x010000) /* SAR state RAM */
-+#define AVSAR_PDSP_BASE (ATM_SAR_BASE + 0x020000) /* SAR PDSP base address */
-+#define AVSAR_TXDMA_BASE (ATM_SAR_BASE + 0x030000) /* Transmit DMA state base */
-+#define AVSAR_TDMASTATE6 0x18 /* Transmit DMA state word 6 */
-+#define AVSAR_RXDMA_BASE (ATM_SAR_BASE + 0x040000) /* Receive DMA state base */
-+#define AVSAR_RDMASTATE0 0x0 /* Receive DMA state word 0 */
++ /* validate the number of interrupts supported */
++ if (int_vector >= VLYNQ_IVR_MAXIVR)
++ return VLYNQ_INVALID_ARG;
++
++ if(map_vector > (VLYNQ_NUM_INT_BITS - 1) )
++ return VLYNQ_INVALID_ARG;
+
-+/*------------------------------------------*/
-+/* DSL Interface */
-+/*------------------------------------------*/
++ if (dev_type == VLYNQ_LOCAL_DVC)
++ {
++ vecreg = (volatile unsigned int *) (VLYNQ_IVR_OFFSET(int_vector));
++ }
++ else
++ {
++ vecreg = (volatile unsigned int *) (VLYNQ_R_IVR_OFFSET(int_vector));
++ }
+
-+#define AVDSL_TX_EN (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000000))
-+#define AVDSL_RX_EN (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000004))
-+#define AVDSL_POLL (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000008))
++ /* Update the intVector<==> bit position translation table */
++ pdev->vector_map[map_vector] = int_vector;
+
-+/* Fast */
++ /* val has been initialised to zero. we only have to turn on appropriate bits*/
++ if(type == VLYNQ_INTR_PULSED)
++ val |= VLYNQ_IVR_INTTYPE_MASK;
++
++ if(pol == VLYNQ_INTR_ACTIVE_LOW)
++ val |= VLYNQ_IVR_INTPOL_MASK;
+
-+#define AVDSL_TX_FIFO_ADDR0 (*(volatile unsigned int *)(DSL_IF_BASE + 0x0000000C))
-+#define AVDSL_TX_FIFO_BASE0 (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000010))
-+#define AVDSL_TX_FIFO_LEN0 (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000014))
-+#define AVDSL_TX_FIFO_PR0 (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000018))
-+#define AVDSL_RX_FIFO_ADDR0 (*(volatile unsigned int *)(DSL_IF_BASE + 0x0000001C))
-+#define AVDSL_RX_FIFO_BASE0 (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000020))
-+#define AVDSL_RX_FIFO_LEN0 (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000024))
-+#define AVDSL_RX_FIFO_PR0 (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000028))
++ val |= map_vector;
+
-+/* Interleaved */
++ /** clear the correct byte position and then or val **/
++ *vecreg = (*vecreg) & ( ~(bytemask << ( (int_vector %4)*8) ) );
+
-+#define AVDSL_TX_FIFO_ADDR1 (*(volatile unsigned int *)(DSL_IF_BASE + 0x0000002C))
-+#define AVDSL_TX_FIFO_BASE1 (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000030))
-+#define AVDSL_TX_FIFO_LEN1 (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000034))
-+#define AVDSL_TX_FIFO_PR1 (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000038))
-+#define AVDSL_RX_FIFO_ADDR1 (*(volatile unsigned int *)(DSL_IF_BASE + 0x0000003C))
-+#define AVDSL_RX_FIFO_BASE1 (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000040))
-+#define AVDSL_RX_FIFO_LEN1 (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000044))
-+#define AVDSL_RX_FIFO_PR1 (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000048))
++ /** write to correct byte position in vecreg*/
++ *vecreg = (*vecreg) | (val << ( (int_vector % 4)*8) ) ;
+
-+/*------------------------------------------*/
-+/* Broadband I/F */
-+/*------------------------------------------*/
++ /* Setting a interrupt vector, leaves the interrupt disabled
++ * which must be enabled subsequently */
+
-+#define AVBBIF_BBIF_CNTRL (*(volatile unsigned int *)(BBIF_CONTROL + 0x00000000))
-+#define AVBBIF_ADDR_TRANS_0 (*(volatile unsigned int *)(BBIF_CONTROL + 0x00000004))
-+#define AVBBIF_ADDR_TRANS_1 (*(volatile unsigned int *)(BBIF_CONTROL + 0x00000008))
-+#define AVBBIF_ADDR_XB_MX_BL (*(volatile unsigned int *)(BBIF_CONTROL + 0x0000000C))
-+#define AVBBIF_INFIFO_LVL (*(volatile unsigned int *)(BBIF_CONTROL + 0x00000010))
-+#define AVBBIF_OUTFIFO_LVL (*(volatile unsigned int *)(BBIF_CONTROL + 0x00000014))
++ return VLYNQ_SUCCESS;
++}
+
-+#define AVBBIF_DISABLED 0x0
-+#define AVBBIF_LBT4040_INT 0x1
-+#define AVBBIF_XBUS 0x2
-+#define AVBBIF_LBT4040_EXT 0x4
+
-+#define AVBBIF_ADDR_MASK0 0xff000000 /* handles upper bits of BBIF 0 address */
-+#define AVBBIF_ADDR_MASK1 0xff800000 /* handles upper bits of BBIF 1 address */
-+#define AVBBIF_TRANS_MASK 0xff000000
-+/*------------------------------------------*/
-+/* GPIO I/F */
-+/*------------------------------------------*/
++/* ----------------------------------------------------------------------------
++ * Function : vlynq_interrupt_vector_cntl()
++ * Description:enables/disable interrupt
++ */
++int vlynq_interrupt_vector_cntl( VLYNQ_DEV *pdev,
++ unsigned int int_vector,
++ VLYNQ_DEV_TYPE dev_type,
++ unsigned int enable)
++{
++ volatile unsigned int *vecReg;
++ unsigned int val=0;
++ unsigned int intenMask=0x80;
+
-+#define GPIO_DATA_INPUT (*(volatile unsigned int *)(GPIO_BASE + 0x00000000))
-+#define GPIO_DATA_OUTPUT (*(volatile unsigned int *)(GPIO_BASE + 0x00000004))
-+#define GPIO_DATA_DIR (*(volatile unsigned int *)(GPIO_BASE + 0x00000008)) /* 0=output 1=input */
-+#define GPIO_DATA_ENABLE (*(volatile unsigned int *)(GPIO_BASE + 0x0000000C)) /* 0=GPIO Mux 1=GPIO */
++ /* validate the number of interrupts supported */
++ if (int_vector >= VLYNQ_IVR_MAXIVR)
++ return VLYNQ_INVALID_ARG;
+
-+#define GPIO_0 (1<<21)
-+#define GPIO_1 (1<<22)
-+#define GPIO_2 (1<<23)
-+#define GPIO_3 (1<<24)
-+#define EINT_1 (1<<18)
++ if (dev_type == VLYNQ_LOCAL_DVC)
++ {
++ vecReg = (volatile unsigned int *) (VLYNQ_IVR_OFFSET(int_vector));
++ }
++ else
++ {
++ vecReg = (volatile unsigned int *) (VLYNQ_R_IVR_OFFSET(int_vector));
++ }
+
-+/*
-+ JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE
-+ If you reset the GPIO interface all of the directions (i/o) of the UART B
-+ interface pins are inputs and must be reconfigured so as not to lose the
-+ serial console interface
-+ JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE
-+*/
++ /** Clear the correct byte position and then or val **/
++ *vecReg = (*vecReg) & ( ~(intenMask << ( (int_vector %4)*8) ) );
+
-+/*------------------------------------------*/
-+/* CLK_CTRL */
-+/*------------------------------------------*/
-+#define PERIPH_CLK_CTL (*(volatile unsigned int *)(CLK_CTRL_BASE + 0x00000004))
++ if(enable)
++ {
++ val |= VLYNQ_IVR_INTEN_MASK;
++ /** Write to correct byte position in vecReg*/
++ *vecReg = (*vecReg) | (val << ( (int_vector % 4)*8) ) ;
++ }
+
-+#define PCLK_0_HALF_VBUS (0<<16)
-+#define PCLK_EQ_INPUT (1<<16)
-+#define BBIF_CLK_HALF_VBUS (0<<17)
++ return VLYNQ_SUCCESS;
++
++}/* end of function vlynq_interrupt_vector_cntl */
++
++
++
++/* ----------------------------------------------------------------------------
++ * Function : vlynq_interrupt_vector_map()
++ * Description:Configures interrupt vector mapping alone
++ */
++int
++vlynq_interrupt_vector_map( VLYNQ_DEV *pdev,
++ VLYNQ_DEV_TYPE dev_type,
++ unsigned int int_vector,
++ unsigned int map_vector)
++{
++ volatile unsigned int * vecreg;
++ unsigned int val=0;
++ unsigned int bytemask=0x1f; /* mask to turn off bits corresponding to int vector */
++
++ /* use the lower 8 bits of val to set the value , shift it to
++ * appropriate byte position in the ivr and write it to the
++ * corresponding register */
++
++ /* validate the number of interrupts supported */
++ if (int_vector >= VLYNQ_IVR_MAXIVR)
++ return VLYNQ_INVALID_ARG;
++
++ if(map_vector > (VLYNQ_NUM_INT_BITS - 1) )
++ return VLYNQ_INVALID_ARG;
++
++ if (dev_type == VLYNQ_LOCAL_DVC)
++ {
++ vecreg = (volatile unsigned int *) (VLYNQ_IVR_OFFSET(int_vector));
++ }
++ else
++ {
++ vecreg = (volatile unsigned int *) (VLYNQ_R_IVR_OFFSET(int_vector));
++ }
++
++ /* Update the intVector<==> bit position translation table */
++ pdev->vector_map[map_vector] = int_vector;
++
++ /** val has been initialised to zero. we only have to turn on
++ * appropriate bits*/
++ val |= map_vector;
++
++ /** clear the correct byte position and then or val **/
++ *vecreg = (*vecreg) & ( ~(bytemask << ( (int_vector %4)*8) ) );
++
++ /** write to correct byte position in vecreg*/
++ *vecreg = (*vecreg) | (val << ( (int_vector % 4)*8) ) ;
++
++ return VLYNQ_SUCCESS;
++}
++
++
++/* ----------------------------------------------------------------------------
++ * function : vlynq_interrupt_set_polarity()
++ * description:configures interrupt polarity .
++ */
++int
++vlynq_interrupt_set_polarity( VLYNQ_DEV *pdev ,
++ VLYNQ_DEV_TYPE dev_type,
++ unsigned int map_vector,
++ VLYNQ_INTR_POLARITY pol)
++{
++ volatile unsigned int * vecreg;
++ int int_vector;
++ unsigned int val=0;
++ unsigned int bytemask=0x20; /** mask to turn off bits corresponding to int polarity */
++
++ /* get the int_vector from map_vector */
++ int_vector = pdev->vector_map[map_vector];
++
++ if(int_vector == -1)
++ return VLYNQ_INTVEC_MAP_NOT_FOUND;
++
++ /* use the lower 8 bits of val to set the value , shift it to
++ * appropriate byte position in the ivr and write it to the
++ * corresponding register */
++
++ if (dev_type == VLYNQ_LOCAL_DVC)
++ {
++ vecreg = (volatile unsigned int *) (VLYNQ_IVR_OFFSET(int_vector));
++ }
++ else
++ {
++ vecreg = (volatile unsigned int *) (VLYNQ_R_IVR_OFFSET(int_vector));
++ }
++
++ /* val has been initialised to zero. we only have to turn on
++ * appropriate bits, if need be*/
++
++ /** clear the correct byte position and then or val **/
++ *vecreg = (*vecreg) & ( ~(bytemask << ( (int_vector %4)*8) ) );
++
++ if( pol == VLYNQ_INTR_ACTIVE_LOW)
++ {
++ val |= VLYNQ_IVR_INTPOL_MASK;
++ /** write to correct byte position in vecreg*/
++ *vecreg = (*vecreg) | (val << ( (int_vector % 4)*8) ) ;
++ }
++
++ return VLYNQ_SUCCESS;
++}
++
++int vlynq_interrupt_get_polarity( VLYNQ_DEV *pdev ,
++ VLYNQ_DEV_TYPE dev_type,
++ unsigned int map_vector)
++{
++ volatile unsigned int * vecreg;
++ int int_vector;
++ unsigned int val=0;
++
++ /* get the int_vector from map_vector */
++ int_vector = pdev->vector_map[map_vector];
++
++ if (map_vector > (VLYNQ_NUM_INT_BITS-1))
++ return(-1);
++
++ if(int_vector == -1)
++ return VLYNQ_INTVEC_MAP_NOT_FOUND;
++
++ /* use the lower 8 bits of val to set the value , shift it to
++ * appropriate byte position in the ivr and write it to the
++ * corresponding register */
++
++ if (dev_type == VLYNQ_LOCAL_DVC)
++ {
++ vecreg = (volatile unsigned int *) (VLYNQ_IVR_OFFSET(int_vector));
++ }
++ else
++ {
++ vecreg = (volatile unsigned int *) (VLYNQ_R_IVR_OFFSET(int_vector));
++ }
++
++ /** read the information into val **/
++ val = (*vecreg) & ((VLYNQ_IVR_INTPOL_MASK << ( (int_vector %4)*8) ) );
++
++ return (val ? (VLYNQ_INTR_ACTIVE_LOW) : (VLYNQ_INTR_ACTIVE_HIGH));
++}
++
++
++/* ----------------------------------------------------------------------------
++ * function : vlynq_interrupt_set_type()
++ * description:configures interrupt type .
++ */
++int vlynq_interrupt_set_type( VLYNQ_DEV *pdev,
++ VLYNQ_DEV_TYPE dev_type,
++ unsigned int map_vector,
++ VLYNQ_INTR_TYPE type)
++{
++ volatile unsigned int * vecreg;
++ unsigned int val=0;
++ int int_vector;
++
++ /** mask to turn off bits corresponding to interrupt type */
++ unsigned int bytemask=0x40;
++
++ /* get the int_vector from map_vector */
++ int_vector = pdev->vector_map[map_vector];
++ if(int_vector == -1)
++ return VLYNQ_INTVEC_MAP_NOT_FOUND;
++
++ /* use the lower 8 bits of val to set the value , shift it to
++ * appropriate byte position in the ivr and write it to the
++ * corresponding register */
++ if (dev_type == VLYNQ_LOCAL_DVC)
++ {
++ vecreg = (volatile unsigned int *) (VLYNQ_IVR_OFFSET(int_vector));
++ }
++ else
++ {
++ vecreg = (volatile unsigned int *) (VLYNQ_R_IVR_OFFSET(int_vector));
++ }
++
++ /** val has been initialised to zero. we only have to turn on
++ * appropriate bits if need be*/
++
++ /** clear the correct byte position and then or val **/
++ *vecreg = (*vecreg) & ( ~(bytemask << ( (int_vector %4)*8) ) );
++
++ if( type == VLYNQ_INTR_PULSED)
++ {
++ val |= VLYNQ_IVR_INTTYPE_MASK;
++ /** write to correct byte position in vecreg*/
++ *vecreg = (*vecreg) | (val << ( (int_vector % 4)*8) ) ;
++ }
++
++ return VLYNQ_SUCCESS;
++}
++
++/* ----------------------------------------------------------------------------
++ * function : vlynq_interrupt_get_type()
++ * description:returns interrupt type .
++ */
++int vlynq_interrupt_get_type( VLYNQ_DEV *pdev, VLYNQ_DEV_TYPE dev_type,
++ unsigned int map_vector)
++{
++ volatile unsigned int * vecreg;
++ unsigned int val=0;
++ int int_vector;
++
++ if (map_vector > (VLYNQ_NUM_INT_BITS-1))
++ return(-1);
++
++ /* get the int_vector from map_vector */
++ int_vector = pdev->vector_map[map_vector];
++ if(int_vector == -1)
++ return VLYNQ_INTVEC_MAP_NOT_FOUND;
++
++ /* use the lower 8 bits of val to set the value , shift it to
++ * appropriate byte position in the ivr and write it to the
++ * corresponding register */
++ if (dev_type == VLYNQ_LOCAL_DVC)
++ {
++ vecreg = (volatile unsigned int *) (VLYNQ_IVR_OFFSET(int_vector));
++ }
++ else
++ {
++ vecreg = (volatile unsigned int *) (VLYNQ_R_IVR_OFFSET(int_vector));
++ }
++
++ /** Read the correct bit position into val **/
++ val = (*vecreg) & ((VLYNQ_IVR_INTTYPE_MASK << ( (int_vector %4)*8) ) );
++
++ return (val ? (VLYNQ_INTR_PULSED) : (VLYNQ_INTR_LEVEL));
++}
++
++/* ----------------------------------------------------------------------------
++ * function : vlynq_interrupt_enable()
++ * description:Enable interrupt by writing to IVR register.
++ */
++int vlynq_interrupt_enable( VLYNQ_DEV *pdev,
++ VLYNQ_DEV_TYPE dev_type,
++ unsigned int map_vector)
++{
++ volatile unsigned int * vecreg;
++ unsigned int val=0;
++ int int_vector;
++
++ /** mask to turn off bits corresponding to interrupt enable */
++ unsigned int bytemask=0x80;
++
++ /* get the int_vector from map_vector */
++ int_vector = pdev->vector_map[map_vector];
++ if(int_vector == -1)
++ return VLYNQ_INTVEC_MAP_NOT_FOUND;
++
++ /* use the lower 8 bits of val to set the value , shift it to
++ * appropriate byte position in the ivr and write it to the
++ * corresponding register */
++
++ if (dev_type == VLYNQ_LOCAL_DVC)
++ {
++ vecreg = (volatile unsigned int *) (VLYNQ_IVR_OFFSET(int_vector));
++ }
++ else
++ {
++ vecreg = (volatile unsigned int *) (VLYNQ_R_IVR_OFFSET(int_vector));
++ }
++
++ /** val has been initialised to zero. we only have to turn on
++ * bit corresponding to interrupt enable*/
++ val |= VLYNQ_IVR_INTEN_MASK;
++
++ /** clear the correct byte position and then or val **/
++ *vecreg = (*vecreg) & ( ~(bytemask << ( (int_vector %4)*8) ) );
++
++ /** write to correct byte position in vecreg*/
++ *vecreg = (*vecreg) | (val << ( (int_vector % 4)*8) ) ;
++
++ return VLYNQ_SUCCESS;
++}
++
++
++/* ----------------------------------------------------------------------------
++ * function : vlynq_interrupt_disable()
++ * description:Disable interrupt by writing to IVR register.
++ */
++int
++vlynq_interrupt_disable( VLYNQ_DEV *pdev,
++ VLYNQ_DEV_TYPE dev_type,
++ unsigned int map_vector)
++{
++ volatile unsigned int * vecreg;
++ int int_vector;
++
++ /** mask to turn off bits corresponding to interrupt enable */
++ unsigned int bytemask=0x80;
++
++ /* get the int_vector from map_vector */
++ int_vector = pdev->vector_map[map_vector];
++ if(int_vector == -1)
++ return VLYNQ_INTVEC_MAP_NOT_FOUND;
++
++ /* use the lower 8 bits of val to set the value , shift it to
++ * appropriate byte position in the ivr and write it to the
++ * corresponding register */
++ if (dev_type == VLYNQ_LOCAL_DVC)
++ {
++ vecreg = (volatile unsigned int *) (VLYNQ_IVR_OFFSET(int_vector));
++ }
++ else
++ {
++ vecreg = (volatile unsigned int *) (VLYNQ_R_IVR_OFFSET(int_vector));
++ }
++
++ /* We disable the interrupt by simply turning off the bit
++ * corresponding to Interrupt enable.
++ * Clear the interrupt enable bit in the correct byte position **/
++ *vecreg = (*vecreg) & ( ~(bytemask << ( (int_vector %4)*8) ) );
++
++ /* Dont have to set any bit positions */
++
++ return VLYNQ_SUCCESS;
++
++}
++
++
++
++
+diff -urN linux.old/drivers/char/serial.c linux.dev/drivers/char/serial.c
+--- linux.old/drivers/char/serial.c 2005-10-21 16:43:20.709226000 +0200
++++ linux.dev/drivers/char/serial.c 2005-11-10 01:10:46.015585250 +0100
+@@ -419,7 +419,40 @@
+ return 0;
+ }
+
+-#if defined(CONFIG_MIPS_ATLAS) || defined(CONFIG_MIPS_SEAD)
++#if defined(CONFIG_AR7)
++
++static _INLINE_ unsigned int serial_in(struct async_struct *info, int offset)
++{
++ return (inb(info->port + (offset * 4)) & 0xff);
++}
++
++
++static _INLINE_ unsigned int serial_inp(struct async_struct *info, int offset)
++{
++#ifdef CONFIG_SERIAL_NOPAUSE_IO
++ return (inb(info->port + (offset * 4)) & 0xff);
++#else
++ return (inb_p(info->port + (offset * 4)) & 0xff);
++#endif
++}
++
++static _INLINE_ void serial_out(struct async_struct *info, int offset, int value)
++{
++ outb(value, info->port + (offset * 4));
++}
++
++
++static _INLINE_ void serial_outp(struct async_struct *info, int offset,
++ int value)
++{
++#ifdef CONFIG_SERIAL_NOPAUSE_IO
++ outb(value, info->port + (offset * 4));
++#else
++ outb_p(value, info->port + (offset * 4));
++#endif
++}
++
++#elif defined(CONFIG_MIPS_ATLAS) || defined(CONFIG_MIPS_SEAD)
+
+ #include <asm/mips-boards/atlas.h>
+
+@@ -478,8 +511,10 @@
+ * needed for certain old 386 machines, I've left these #define's
+ * in....
+ */
++#ifndef CONFIG_AR7
+ #define serial_inp(info, offset) serial_in(info, offset)
+ #define serial_outp(info, offset, value) serial_out(info, offset, value)
++#endif
+
+
+ /*
+@@ -1728,7 +1763,15 @@
+ /* Special case since 134 is really 134.5 */
+ quot = (2*baud_base / 269);
+ else if (baud)
++#ifdef CONFIG_AR7
++ quot = (CONFIG_AR7_SYS*500000) / baud;
++
++ if ((quot%16)>7)
++ quot += 8;
++ quot /=16;
++#else
+ quot = baud_base / baud;
++#endif
+ }
+ /* If the quotient is zero refuse the change */
+ if (!quot && old_termios) {
+@@ -5540,8 +5583,10 @@
+ state->irq = irq_cannonicalize(state->irq);
+ if (state->hub6)
+ state->io_type = SERIAL_IO_HUB6;
++#ifndef CONFIG_AR7
+ if (state->port && check_region(state->port,8))
+ continue;
++#endif
+ #ifdef CONFIG_MCA
+ if ((state->flags & ASYNC_BOOT_ONLYMCA) && !MCA_bus)
+ continue;
+@@ -5997,7 +6042,15 @@
+ info->io_type = state->io_type;
+ info->iomem_base = state->iomem_base;
+ info->iomem_reg_shift = state->iomem_reg_shift;
++#ifdef CONFIG_AR7
++ quot = (CONFIG_AR7_SYS*500000) / baud;
++
++ if ((quot%16)>7)
++ quot += 8;
++ quot /=16;
++#else
+ quot = state->baud_base / baud;
++#endif
+ cval = cflag & (CSIZE | CSTOPB);
+ #if defined(__powerpc__) || defined(__alpha__)
+ cval >>= 8;
+diff -urN linux.old/drivers/char/serial.c.orig linux.dev/drivers/char/serial.c.orig
+--- linux.old/drivers/char/serial.c.orig 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/char/serial.c.orig 2005-11-10 01:10:46.051587500 +0100
+@@ -0,0 +1,6054 @@
++/*
++ * linux/drivers/char/serial.c
++ *
++ * Copyright (C) 1991, 1992 Linus Torvalds
++ * Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997,
++ * 1998, 1999 Theodore Ts'o
++ *
++ * Extensively rewritten by Theodore Ts'o, 8/16/92 -- 9/14/92. Now
++ * much more extensible to support other serial cards based on the
++ * 16450/16550A UART's. Added support for the AST FourPort and the
++ * Accent Async board.
++ *
++ * set_serial_info fixed to set the flags, custom divisor, and uart
++ * type fields. Fix suggested by Michael K. Johnson 12/12/92.
++ *
++ * 11/95: TIOCMIWAIT, TIOCGICOUNT by Angelo Haritsis <ah@doc.ic.ac.uk>
++ *
++ * 03/96: Modularised by Angelo Haritsis <ah@doc.ic.ac.uk>
++ *
++ * rs_set_termios fixed to look also for changes of the input
++ * flags INPCK, BRKINT, PARMRK, IGNPAR and IGNBRK.
++ * Bernd Anhäupl 05/17/96.
++ *
++ * 1/97: Extended dumb serial ports are a config option now.
++ * Saves 4k. Michael A. Griffith <grif@acm.org>
++ *
++ * 8/97: Fix bug in rs_set_termios with RTS
++ * Stanislav V. Voronyi <stas@uanet.kharkov.ua>
++ *
++ * 3/98: Change the IRQ detection, use of probe_irq_o*(),
++ * suppress TIOCSERGWILD and TIOCSERSWILD
++ * Etienne Lorrain <etienne.lorrain@ibm.net>
++ *
++ * 4/98: Added changes to support the ARM architecture proposed by
++ * Russell King
++ *
++ * 5/99: Updated to include support for the XR16C850 and ST16C654
++ * uarts. Stuart MacDonald <stuartm@connecttech.com>
++ *
++ * 8/99: Generalized PCI support added. Theodore Ts'o
++ *
++ * 3/00: Rid circular buffer of redundant xmit_cnt. Fix a
++ * few races on freeing buffers too.
++ * Alan Modra <alan@linuxcare.com>
++ *
++ * 5/00: Support for the RSA-DV II/S card added.
++ * Kiyokazu SUTO <suto@ks-and-ks.ne.jp>
++ *
++ * 6/00: Remove old-style timer, use timer_list
++ * Andrew Morton <andrewm@uow.edu.au>
++ *
++ * 7/00: Support Timedia/Sunix/Exsys PCI cards
++ *
++ * 7/00: fix some returns on failure not using MOD_DEC_USE_COUNT.
++ * Arnaldo Carvalho de Melo <acme@conectiva.com.br>
++ *
++ * 10/00: add in optional software flow control for serial console.
++ * Kanoj Sarcar <kanoj@sgi.com> (Modified by Theodore Ts'o)
++ *
++ * 02/02: Fix for AMD Elan bug in transmit irq routine, by
++ * Christer Weinigel <wingel@hog.ctrl-c.liu.se>,
++ * Robert Schwebel <robert@schwebel.de>,
++ * Juergen Beisert <jbeisert@eurodsn.de>,
++ * Theodore Ts'o <tytso@mit.edu>
++ *
++ * 10/00: Added suport for MIPS Atlas board.
++ * 11/00: Hooks for serial kernel debug port support added.
++ * Kevin D. Kissell, kevink@mips.com and Carsten Langgaard,
++ * carstenl@mips.com
++ * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
++ */
++
++static char *serial_version = "5.05c";
++static char *serial_revdate = "2001-07-08";
++
++/*
++ * Serial driver configuration section. Here are the various options:
++ *
++ * CONFIG_HUB6
++ * Enables support for the venerable Bell Technologies
++ * HUB6 card.
++ *
++ * CONFIG_SERIAL_MANY_PORTS
++ * Enables support for ports beyond the standard, stupid
++ * COM 1/2/3/4.
++ *
++ * CONFIG_SERIAL_MULTIPORT
++ * Enables support for special multiport board support.
++ *
++ * CONFIG_SERIAL_SHARE_IRQ
++ * Enables support for multiple serial ports on one IRQ
++ *
++ * CONFIG_SERIAL_DETECT_IRQ
++ * Enable the autodetection of IRQ on standart ports
++ *
++ * SERIAL_PARANOIA_CHECK
++ * Check the magic number for the async_structure where
++ * ever possible.
++ *
++ * CONFIG_SERIAL_ACPI
++ * Enable support for serial console port and serial
++ * debug port as defined by the SPCR and DBGP tables in
++ * ACPI 2.0.
++ */
++
++#include <linux/config.h>
++#include <linux/version.h>
++
++#undef SERIAL_PARANOIA_CHECK
++#define CONFIG_SERIAL_NOPAUSE_IO
++#define SERIAL_DO_RESTART
++
++#if 0
++/* These defines are normally controlled by the autoconf.h */
++#define CONFIG_SERIAL_MANY_PORTS
++#define CONFIG_SERIAL_SHARE_IRQ
++#define CONFIG_SERIAL_DETECT_IRQ
++#define CONFIG_SERIAL_MULTIPORT
++#define CONFIG_HUB6
++#endif
++
++#ifdef CONFIG_PCI
++#define ENABLE_SERIAL_PCI
++#ifndef CONFIG_SERIAL_SHARE_IRQ
++#define CONFIG_SERIAL_SHARE_IRQ
++#endif
++#ifndef CONFIG_SERIAL_MANY_PORTS
++#define CONFIG_SERIAL_MANY_PORTS
++#endif
++#endif
++
++#ifdef CONFIG_SERIAL_ACPI
++#define ENABLE_SERIAL_ACPI
++#endif
++
++#if defined(CONFIG_ISAPNP)|| (defined(CONFIG_ISAPNP_MODULE) && defined(MODULE))
++#ifndef ENABLE_SERIAL_PNP
++#define ENABLE_SERIAL_PNP
++#endif
++#endif
++
++/* Set of debugging defines */
++
++#undef SERIAL_DEBUG_INTR
++#undef SERIAL_DEBUG_OPEN
++#undef SERIAL_DEBUG_FLOW
++#undef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
++#undef SERIAL_DEBUG_PCI
++#undef SERIAL_DEBUG_AUTOCONF
++
++/* Sanity checks */
++
++#ifdef CONFIG_SERIAL_MULTIPORT
++#ifndef CONFIG_SERIAL_SHARE_IRQ
++#define CONFIG_SERIAL_SHARE_IRQ
++#endif
++#endif
++
++#ifdef CONFIG_HUB6
++#ifndef CONFIG_SERIAL_MANY_PORTS
++#define CONFIG_SERIAL_MANY_PORTS
++#endif
++#ifndef CONFIG_SERIAL_SHARE_IRQ
++#define CONFIG_SERIAL_SHARE_IRQ
++#endif
++#endif
++
++#ifdef MODULE
++#undef CONFIG_SERIAL_CONSOLE
++#endif
++
++#define CONFIG_SERIAL_RSA
++
++#define RS_STROBE_TIME (10*HZ)
++#define RS_ISR_PASS_LIMIT 256
++
++#if defined(__i386__) && (defined(CONFIG_M386) || defined(CONFIG_M486))
++#define SERIAL_INLINE
++#endif
++
++/*
++ * End of serial driver configuration section.
++ */
++
++#include <linux/module.h>
++
++#include <linux/types.h>
++#ifdef LOCAL_HEADERS
++#include "serial_local.h"
++#else
++#include <linux/serial.h>
++#include <linux/serialP.h>
++#include <linux/serial_reg.h>
++#include <asm/serial.h>
++#define LOCAL_VERSTRING ""
++#endif
++
++#include <linux/errno.h>
++#include <linux/signal.h>
++#include <linux/sched.h>
++#include <linux/timer.h>
++#include <linux/interrupt.h>
++#include <linux/tty.h>
++#include <linux/tty_flip.h>
++#include <linux/major.h>
++#include <linux/string.h>
++#include <linux/fcntl.h>
++#include <linux/ptrace.h>
++#include <linux/ioport.h>
++#include <linux/mm.h>
++#include <linux/slab.h>
++#if (LINUX_VERSION_CODE >= 131343)
++#include <linux/init.h>
++#endif
++#if (LINUX_VERSION_CODE >= 131336)
++#include <asm/uaccess.h>
++#endif
++#include <linux/delay.h>
++#ifdef CONFIG_SERIAL_CONSOLE
++#include <linux/console.h>
++#endif
++#ifdef ENABLE_SERIAL_PCI
++#include <linux/pci.h>
++#endif
++#ifdef ENABLE_SERIAL_PNP
++#include <linux/isapnp.h>
++#endif
++#ifdef CONFIG_MAGIC_SYSRQ
++#include <linux/sysrq.h>
++#endif
++
++/*
++ * All of the compatibilty code so we can compile serial.c against
++ * older kernels is hidden in serial_compat.h
++ */
++#if defined(LOCAL_HEADERS) || (LINUX_VERSION_CODE < 0x020317) /* 2.3.23 */
++#include "serial_compat.h"
++#endif
++
++#include <asm/system.h>
++#include <asm/io.h>
++#include <asm/irq.h>
++#include <asm/bitops.h>
++
++#if defined(CONFIG_MAC_SERIAL)
++#define SERIAL_DEV_OFFSET ((_machine == _MACH_prep || _machine == _MACH_chrp) ? 0 : 2)
++#else
++#define SERIAL_DEV_OFFSET 0
++#endif
++
++#ifdef SERIAL_INLINE
++#define _INLINE_ inline
++#else
++#define _INLINE_
++#endif
++
++static char *serial_name = "Serial driver";
++
++static DECLARE_TASK_QUEUE(tq_serial);
++
++static struct tty_driver serial_driver, callout_driver;
++static int serial_refcount;
++
++static struct timer_list serial_timer;
++
++/* serial subtype definitions */
++#ifndef SERIAL_TYPE_NORMAL
++#define SERIAL_TYPE_NORMAL 1
++#define SERIAL_TYPE_CALLOUT 2
++#endif
++
++/* number of characters left in xmit buffer before we ask for more */
++#define WAKEUP_CHARS 256
++
++/*
++ * IRQ_timeout - How long the timeout should be for each IRQ
++ * should be after the IRQ has been active.
++ */
++
++static struct async_struct *IRQ_ports[NR_IRQS];
++#ifdef CONFIG_SERIAL_MULTIPORT
++static struct rs_multiport_struct rs_multiport[NR_IRQS];
++#endif
++static int IRQ_timeout[NR_IRQS];
++#ifdef CONFIG_SERIAL_CONSOLE
++static struct console sercons;
++static int lsr_break_flag;
++#endif
++#if defined(CONFIG_SERIAL_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
++static unsigned long break_pressed; /* break, really ... */
++#endif
++
++static unsigned detect_uart_irq (struct serial_state * state);
++static void autoconfig(struct serial_state * state);
++static void change_speed(struct async_struct *info, struct termios *old);
++static void rs_wait_until_sent(struct tty_struct *tty, int timeout);
++
++/*
++ * Here we define the default xmit fifo size used for each type of
++ * UART
++ */
++static struct serial_uart_config uart_config[] = {
++ { "unknown", 1, 0 },
++ { "8250", 1, 0 },
++ { "16450", 1, 0 },
++ { "16550", 1, 0 },
++ { "16550A", 16, UART_CLEAR_FIFO | UART_USE_FIFO },
++ { "cirrus", 1, 0 }, /* usurped by cyclades.c */
++ { "ST16650", 1, UART_CLEAR_FIFO | UART_STARTECH },
++ { "ST16650V2", 32, UART_CLEAR_FIFO | UART_USE_FIFO |
++ UART_STARTECH },
++ { "TI16750", 64, UART_CLEAR_FIFO | UART_USE_FIFO},
++ { "Startech", 1, 0}, /* usurped by cyclades.c */
++ { "16C950/954", 128, UART_CLEAR_FIFO | UART_USE_FIFO},
++ { "ST16654", 64, UART_CLEAR_FIFO | UART_USE_FIFO |
++ UART_STARTECH },
++ { "XR16850", 128, UART_CLEAR_FIFO | UART_USE_FIFO |
++ UART_STARTECH },
++ { "RSA", 2048, UART_CLEAR_FIFO | UART_USE_FIFO },
++ { 0, 0}
++};
++
++#if defined(CONFIG_SERIAL_RSA) && defined(MODULE)
++
++#define PORT_RSA_MAX 4
++static int probe_rsa[PORT_RSA_MAX];
++static int force_rsa[PORT_RSA_MAX];
++
++MODULE_PARM(probe_rsa, "1-" __MODULE_STRING(PORT_RSA_MAX) "i");
++MODULE_PARM_DESC(probe_rsa, "Probe I/O ports for RSA");
++MODULE_PARM(force_rsa, "1-" __MODULE_STRING(PORT_RSA_MAX) "i");
++MODULE_PARM_DESC(force_rsa, "Force I/O ports for RSA");
++#endif /* CONFIG_SERIAL_RSA */
++
++struct serial_state rs_table[RS_TABLE_SIZE] = {
++ SERIAL_PORT_DFNS /* Defined in serial.h */
++};
++
++#define NR_PORTS (sizeof(rs_table)/sizeof(struct serial_state))
++int serial_nr_ports = NR_PORTS;
++
++#if (defined(ENABLE_SERIAL_PCI) || defined(ENABLE_SERIAL_PNP))
++#define NR_PCI_BOARDS 8
++
++static struct pci_board_inst serial_pci_board[NR_PCI_BOARDS];
++
++#ifndef IS_PCI_REGION_IOPORT
++#define IS_PCI_REGION_IOPORT(dev, r) (pci_resource_flags((dev), (r)) & \
++ IORESOURCE_IO)
++#endif
++#ifndef IS_PCI_REGION_IOMEM
++#define IS_PCI_REGION_IOMEM(dev, r) (pci_resource_flags((dev), (r)) & \
++ IORESOURCE_MEM)
++#endif
++#ifndef PCI_IRQ_RESOURCE
++#define PCI_IRQ_RESOURCE(dev, r) ((dev)->irq_resource[r].start)
++#endif
++#ifndef pci_get_subvendor
++#define pci_get_subvendor(dev) ((dev)->subsystem_vendor)
++#define pci_get_subdevice(dev) ((dev)->subsystem_device)
++#endif
++#endif /* ENABLE_SERIAL_PCI || ENABLE_SERIAL_PNP */
++
++#ifndef PREPARE_FUNC
++#define PREPARE_FUNC(dev) (dev->prepare)
++#define ACTIVATE_FUNC(dev) (dev->activate)
++#define DEACTIVATE_FUNC(dev) (dev->deactivate)
++#endif
++
++#define HIGH_BITS_OFFSET ((sizeof(long)-sizeof(int))*8)
++
++static struct tty_struct *serial_table[NR_PORTS];
++static struct termios *serial_termios[NR_PORTS];
++static struct termios *serial_termios_locked[NR_PORTS];
++
++
++#if defined(MODULE) && defined(SERIAL_DEBUG_MCOUNT)
++#define DBG_CNT(s) printk("(%s): [%x] refc=%d, serc=%d, ttyc=%d -> %s\n", \
++ kdevname(tty->device), (info->flags), serial_refcount,info->count,tty->count,s)
++#else
++#define DBG_CNT(s)
++#endif
++
++/*
++ * tmp_buf is used as a temporary buffer by serial_write. We need to
++ * lock it in case the copy_from_user blocks while swapping in a page,
++ * and some other program tries to do a serial write at the same time.
++ * Since the lock will only come under contention when the system is
++ * swapping and available memory is low, it makes sense to share one
++ * buffer across all the serial ports, since it significantly saves
++ * memory if large numbers of serial ports are open.
++ */
++static unsigned char *tmp_buf;
++#ifdef DECLARE_MUTEX
++static DECLARE_MUTEX(tmp_buf_sem);
++#else
++static struct semaphore tmp_buf_sem = MUTEX;
++#endif
++
++
++static inline int serial_paranoia_check(struct async_struct *info,
++ kdev_t device, const char *routine)
++{
++#ifdef SERIAL_PARANOIA_CHECK
++ static const char *badmagic =
++ "Warning: bad magic number for serial struct (%s) in %s\n";
++ static const char *badinfo =
++ "Warning: null async_struct for (%s) in %s\n";
++
++ if (!info) {
++ printk(badinfo, kdevname(device), routine);
++ return 1;
++ }
++ if (info->magic != SERIAL_MAGIC) {
++ printk(badmagic, kdevname(device), routine);
++ return 1;
++ }
++#endif
++ return 0;
++}
++
++#if defined(CONFIG_MIPS_ATLAS) || defined(CONFIG_MIPS_SEAD)
++
++#include <asm/mips-boards/atlas.h>
++
++static _INLINE_ unsigned int serial_in(struct async_struct *info, int offset)
++{
++ return (*(volatile unsigned int *)(mips_io_port_base + ATLAS_UART_REGS_BASE + offset*8) & 0xff);
++}
++
++static _INLINE_ void serial_out(struct async_struct *info, int offset, int value)
++{
++ *(volatile unsigned int *)(mips_io_port_base + ATLAS_UART_REGS_BASE + offset*8) = value;
++}
++
++#else
++
++static _INLINE_ unsigned int serial_in(struct async_struct *info, int offset)
++{
++ switch (info->io_type) {
++#ifdef CONFIG_HUB6
++ case SERIAL_IO_HUB6:
++ outb(info->hub6 - 1 + offset, info->port);
++ return inb(info->port+1);
++#endif
++ case SERIAL_IO_MEM:
++ return readb((unsigned long) info->iomem_base +
++ (offset<<info->iomem_reg_shift));
++ default:
++ return inb(info->port + offset);
++ }
++}
++
++static _INLINE_ void serial_out(struct async_struct *info, int offset,
++ int value)
++{
++ switch (info->io_type) {
++#ifdef CONFIG_HUB6
++ case SERIAL_IO_HUB6:
++ outb(info->hub6 - 1 + offset, info->port);
++ outb(value, info->port+1);
++ break;
++#endif
++ case SERIAL_IO_MEM:
++ writeb(value, (unsigned long) info->iomem_base +
++ (offset<<info->iomem_reg_shift));
++ break;
++ default:
++ outb(value, info->port+offset);
++ }
++}
++#endif
++
++
++/*
++ * We used to support using pause I/O for certain machines. We
++ * haven't supported this for a while, but just in case it's badly
++ * needed for certain old 386 machines, I've left these #define's
++ * in....
++ */
++#define serial_inp(info, offset) serial_in(info, offset)
++#define serial_outp(info, offset, value) serial_out(info, offset, value)
++
++
++/*
++ * For the 16C950
++ */
++void serial_icr_write(struct async_struct *info, int offset, int value)
++{
++ serial_out(info, UART_SCR, offset);
++ serial_out(info, UART_ICR, value);
++}
++
++unsigned int serial_icr_read(struct async_struct *info, int offset)
++{
++ int value;
++
++ serial_icr_write(info, UART_ACR, info->ACR | UART_ACR_ICRRD);
++ serial_out(info, UART_SCR, offset);
++ value = serial_in(info, UART_ICR);
++ serial_icr_write(info, UART_ACR, info->ACR);
++ return value;
++}
++
++/*
++ * ------------------------------------------------------------
++ * rs_stop() and rs_start()
++ *
++ * This routines are called before setting or resetting tty->stopped.
++ * They enable or disable transmitter interrupts, as necessary.
++ * ------------------------------------------------------------
++ */
++static void rs_stop(struct tty_struct *tty)
++{
++ struct async_struct *info = (struct async_struct *)tty->driver_data;
++ unsigned long flags;
++
++ if (serial_paranoia_check(info, tty->device, "rs_stop"))
++ return;
++
++ save_flags(flags); cli();
++ if (info->IER & UART_IER_THRI) {
++ info->IER &= ~UART_IER_THRI;
++ serial_out(info, UART_IER, info->IER);
++ }
++ if (info->state->type == PORT_16C950) {
++ info->ACR |= UART_ACR_TXDIS;
++ serial_icr_write(info, UART_ACR, info->ACR);
++ }
++ restore_flags(flags);
++}
++
++static void rs_start(struct tty_struct *tty)
++{
++ struct async_struct *info = (struct async_struct *)tty->driver_data;
++ unsigned long flags;
++
++ if (serial_paranoia_check(info, tty->device, "rs_start"))
++ return;
++
++ save_flags(flags); cli();
++ if (info->xmit.head != info->xmit.tail
++ && info->xmit.buf
++ && !(info->IER & UART_IER_THRI)) {
++ info->IER |= UART_IER_THRI;
++ serial_out(info, UART_IER, info->IER);
++ }
++ if (info->state->type == PORT_16C950) {
++ info->ACR &= ~UART_ACR_TXDIS;
++ serial_icr_write(info, UART_ACR, info->ACR);
++ }
++ restore_flags(flags);
++}
++
++/*
++ * ----------------------------------------------------------------------
++ *
++ * Here starts the interrupt handling routines. All of the following
++ * subroutines are declared as inline and are folded into
++ * rs_interrupt(). They were separated out for readability's sake.
++ *
++ * Note: rs_interrupt() is a "fast" interrupt, which means that it
++ * runs with interrupts turned off. People who may want to modify
++ * rs_interrupt() should try to keep the interrupt handler as fast as
++ * possible. After you are done making modifications, it is not a bad
++ * idea to do:
++ *
++ * gcc -S -DKERNEL -Wall -Wstrict-prototypes -O6 -fomit-frame-pointer serial.c
++ *
++ * and look at the resulting assemble code in serial.s.
++ *
++ * - Ted Ts'o (tytso@mit.edu), 7-Mar-93
++ * -----------------------------------------------------------------------
++ */
++
++/*
++ * This routine is used by the interrupt handler to schedule
++ * processing in the software interrupt portion of the driver.
++ */
++static _INLINE_ void rs_sched_event(struct async_struct *info,
++ int event)
++{
++ info->event |= 1 << event;
++ queue_task(&info->tqueue, &tq_serial);
++ mark_bh(SERIAL_BH);
++}
++
++static _INLINE_ void receive_chars(struct async_struct *info,
++ int *status, struct pt_regs * regs)
++{
++ struct tty_struct *tty = info->tty;
++ unsigned char ch;
++ struct async_icount *icount;
++ int max_count = 256;
++
++ icount = &info->state->icount;
++ do {
++ if (tty->flip.count >= TTY_FLIPBUF_SIZE) {
++ tty->flip.tqueue.routine((void *) tty);
++ if (tty->flip.count >= TTY_FLIPBUF_SIZE) {
++ /* no room in flip buffer, discard rx FIFO contents to clear IRQ
++ * *FIXME* Hardware with auto flow control
++ * would benefit from leaving the data in the FIFO and
++ * disabling the rx IRQ until space becomes available.
++ */
++ do {
++ serial_inp(info, UART_RX);
++ icount->overrun++;
++ *status = serial_inp(info, UART_LSR);
++ } while ((*status & UART_LSR_DR) && (max_count-- > 0));
++ return; // if TTY_DONT_FLIP is set
++ }
++ }
++ ch = serial_inp(info, UART_RX);
++ *tty->flip.char_buf_ptr = ch;
++ icount->rx++;
++
++#ifdef SERIAL_DEBUG_INTR
++ printk("DR%02x:%02x...", ch, *status);
++#endif
++ *tty->flip.flag_buf_ptr = 0;
++ if (*status & (UART_LSR_BI | UART_LSR_PE |
++ UART_LSR_FE | UART_LSR_OE)) {
++ /*
++ * For statistics only
++ */
++ if (*status & UART_LSR_BI) {
++ *status &= ~(UART_LSR_FE | UART_LSR_PE);
++ icount->brk++;
++ /*
++ * We do the SysRQ and SAK checking
++ * here because otherwise the break
++ * may get masked by ignore_status_mask
++ * or read_status_mask.
++ */
++#if defined(CONFIG_SERIAL_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
++ if (info->line == sercons.index) {
++ if (!break_pressed) {
++ break_pressed = jiffies;
++ goto ignore_char;
++ }
++ break_pressed = 0;
++ }
++#endif
++ if (info->flags & ASYNC_SAK)
++ do_SAK(tty);
++ } else if (*status & UART_LSR_PE)
++ icount->parity++;
++ else if (*status & UART_LSR_FE)
++ icount->frame++;
++ if (*status & UART_LSR_OE)
++ icount->overrun++;
++
++ /*
++ * Mask off conditions which should be ignored.
++ */
++ *status &= info->read_status_mask;
++
++#ifdef CONFIG_SERIAL_CONSOLE
++ if (info->line == sercons.index) {
++ /* Recover the break flag from console xmit */
++ *status |= lsr_break_flag;
++ lsr_break_flag = 0;
++ }
++#endif
++ if (*status & (UART_LSR_BI)) {
++#ifdef SERIAL_DEBUG_INTR
++ printk("handling break....");
++#endif
++ *tty->flip.flag_buf_ptr = TTY_BREAK;
++ } else if (*status & UART_LSR_PE)
++ *tty->flip.flag_buf_ptr = TTY_PARITY;
++ else if (*status & UART_LSR_FE)
++ *tty->flip.flag_buf_ptr = TTY_FRAME;
++ }
++#if defined(CONFIG_SERIAL_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
++ if (break_pressed && info->line == sercons.index) {
++ if (ch != 0 &&
++ time_before(jiffies, break_pressed + HZ*5)) {
++ handle_sysrq(ch, regs, NULL, NULL);
++ break_pressed = 0;
++ goto ignore_char;
++ }
++ break_pressed = 0;
++ }
++#endif
++ if ((*status & info->ignore_status_mask) == 0) {
++ tty->flip.flag_buf_ptr++;
++ tty->flip.char_buf_ptr++;
++ tty->flip.count++;
++ }
++ if ((*status & UART_LSR_OE) &&
++ (tty->flip.count < TTY_FLIPBUF_SIZE)) {
++ /*
++ * Overrun is special, since it's reported
++ * immediately, and doesn't affect the current
++ * character
++ */
++ *tty->flip.flag_buf_ptr = TTY_OVERRUN;
++ tty->flip.count++;
++ tty->flip.flag_buf_ptr++;
++ tty->flip.char_buf_ptr++;
++ }
++#if defined(CONFIG_SERIAL_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
++ ignore_char:
++#endif
++ *status = serial_inp(info, UART_LSR);
++ } while ((*status & UART_LSR_DR) && (max_count-- > 0));
++#if (LINUX_VERSION_CODE > 131394) /* 2.1.66 */
++ tty_flip_buffer_push(tty);
++#else
++ queue_task_irq_off(&tty->flip.tqueue, &tq_timer);
++#endif
++}
++
++static _INLINE_ void transmit_chars(struct async_struct *info, int *intr_done)
++{
++ int count;
++
++ if (info->x_char) {
++ serial_outp(info, UART_TX, info->x_char);
++ info->state->icount.tx++;
++ info->x_char = 0;
++ if (intr_done)
++ *intr_done = 0;
++ return;
++ }
++ if (info->xmit.head == info->xmit.tail
++ || info->tty->stopped
++ || info->tty->hw_stopped) {
++ info->IER &= ~UART_IER_THRI;
++ serial_out(info, UART_IER, info->IER);
++ return;
++ }
++
++ count = info->xmit_fifo_size;
++ do {
++ serial_out(info, UART_TX, info->xmit.buf[info->xmit.tail]);
++ info->xmit.tail = (info->xmit.tail + 1) & (SERIAL_XMIT_SIZE-1);
++ info->state->icount.tx++;
++ if (info->xmit.head == info->xmit.tail)
++ break;
++ } while (--count > 0);
++
++ if (CIRC_CNT(info->xmit.head,
++ info->xmit.tail,
++ SERIAL_XMIT_SIZE) < WAKEUP_CHARS)
++ rs_sched_event(info, RS_EVENT_WRITE_WAKEUP);
++
++#ifdef SERIAL_DEBUG_INTR
++ printk("THRE...");
++#endif
++ if (intr_done)
++ *intr_done = 0;
++
++ if (info->xmit.head == info->xmit.tail) {
++ info->IER &= ~UART_IER_THRI;
++ serial_out(info, UART_IER, info->IER);
++ }
++}
++
++static _INLINE_ void check_modem_status(struct async_struct *info)
++{
++ int status;
++ struct async_icount *icount;
++
++ status = serial_in(info, UART_MSR);
++
++ if (status & UART_MSR_ANY_DELTA) {
++ icount = &info->state->icount;
++ /* update input line counters */
++ if (status & UART_MSR_TERI)
++ icount->rng++;
++ if (status & UART_MSR_DDSR)
++ icount->dsr++;
++ if (status & UART_MSR_DDCD) {
++ icount->dcd++;
++#ifdef CONFIG_HARD_PPS
++ if ((info->flags & ASYNC_HARDPPS_CD) &&
++ (status & UART_MSR_DCD))
++ hardpps();
++#endif
++ }
++ if (status & UART_MSR_DCTS)
++ icount->cts++;
++ wake_up_interruptible(&info->delta_msr_wait);
++ }
++
++ if ((info->flags & ASYNC_CHECK_CD) && (status & UART_MSR_DDCD)) {
++#if (defined(SERIAL_DEBUG_OPEN) || defined(SERIAL_DEBUG_INTR))
++ printk("ttys%d CD now %s...", info->line,
++ (status & UART_MSR_DCD) ? "on" : "off");
++#endif
++ if (status & UART_MSR_DCD)
++ wake_up_interruptible(&info->open_wait);
++ else if (!((info->flags & ASYNC_CALLOUT_ACTIVE) &&
++ (info->flags & ASYNC_CALLOUT_NOHUP))) {
++#ifdef SERIAL_DEBUG_OPEN
++ printk("doing serial hangup...");
++#endif
++ if (info->tty)
++ tty_hangup(info->tty);
++ }
++ }
++ if (info->flags & ASYNC_CTS_FLOW) {
++ if (info->tty->hw_stopped) {
++ if (status & UART_MSR_CTS) {
++#if (defined(SERIAL_DEBUG_INTR) || defined(SERIAL_DEBUG_FLOW))
++ printk("CTS tx start...");
++#endif
++ info->tty->hw_stopped = 0;
++ info->IER |= UART_IER_THRI;
++ serial_out(info, UART_IER, info->IER);
++ rs_sched_event(info, RS_EVENT_WRITE_WAKEUP);
++ return;
++ }
++ } else {
++ if (!(status & UART_MSR_CTS)) {
++#if (defined(SERIAL_DEBUG_INTR) || defined(SERIAL_DEBUG_FLOW))
++ printk("CTS tx stop...");
++#endif
++ info->tty->hw_stopped = 1;
++ info->IER &= ~UART_IER_THRI;
++ serial_out(info, UART_IER, info->IER);
++ }
++ }
++ }
++}
++
++#ifdef CONFIG_SERIAL_SHARE_IRQ
++/*
++ * This is the serial driver's generic interrupt routine
++ */
++static void rs_interrupt(int irq, void *dev_id, struct pt_regs * regs)
++{
++ int status, iir;
++ struct async_struct * info;
++ int pass_counter = 0;
++ struct async_struct *end_mark = 0;
++#ifdef CONFIG_SERIAL_MULTIPORT
++ int first_multi = 0;
++ struct rs_multiport_struct *multi;
++#endif
++
++#ifdef SERIAL_DEBUG_INTR
++ printk("rs_interrupt(%d)...", irq);
++#endif
++
++ info = IRQ_ports[irq];
++ if (!info)
++ return;
++
++#ifdef CONFIG_SERIAL_MULTIPORT
++ multi = &rs_multiport[irq];
++ if (multi->port_monitor)
++ first_multi = inb(multi->port_monitor);
++#endif
++
++ do {
++ if (!info->tty ||
++ ((iir=serial_in(info, UART_IIR)) & UART_IIR_NO_INT)) {
++ if (!end_mark)
++ end_mark = info;
++ goto next;
++ }
++#ifdef SERIAL_DEBUG_INTR
++ printk("IIR = %x...", serial_in(info, UART_IIR));
++#endif
++ end_mark = 0;
++
++ info->last_active = jiffies;
++
++ status = serial_inp(info, UART_LSR);
++#ifdef SERIAL_DEBUG_INTR
++ printk("status = %x...", status);
++#endif
++ if (status & UART_LSR_DR)
++ receive_chars(info, &status, regs);
++ check_modem_status(info);
++#ifdef CONFIG_MELAN
++ if ((status & UART_LSR_THRE) ||
++ /* for buggy ELAN processors */
++ ((iir & UART_IIR_ID) == UART_IIR_THRI))
++ transmit_chars(info, 0);
++#else
++ if (status & UART_LSR_THRE)
++ transmit_chars(info, 0);
++#endif
++
++ next:
++ info = info->next_port;
++ if (!info) {
++ info = IRQ_ports[irq];
++ if (pass_counter++ > RS_ISR_PASS_LIMIT) {
++#if 0
++ printk("rs loop break\n");
++#endif
++ break; /* Prevent infinite loops */
++ }
++ continue;
++ }
++ } while (end_mark != info);
++#ifdef CONFIG_SERIAL_MULTIPORT
++ if (multi->port_monitor)
++ printk("rs port monitor (normal) irq %d: 0x%x, 0x%x\n",
++ info->state->irq, first_multi,
++ inb(multi->port_monitor));
++#endif
++#ifdef SERIAL_DEBUG_INTR
++ printk("end.\n");
++#endif
++}
++#endif /* #ifdef CONFIG_SERIAL_SHARE_IRQ */
++
++
++/*
++ * This is the serial driver's interrupt routine for a single port
++ */
++static void rs_interrupt_single(int irq, void *dev_id, struct pt_regs * regs)
++{
++ int status, iir;
++ int pass_counter = 0;
++ struct async_struct * info;
++#ifdef CONFIG_SERIAL_MULTIPORT
++ int first_multi = 0;
++ struct rs_multiport_struct *multi;
++#endif
++
++#ifdef SERIAL_DEBUG_INTR
++ printk("rs_interrupt_single(%d)...", irq);
++#endif
++
++ info = IRQ_ports[irq];
++ if (!info || !info->tty)
++ return;
++
++#ifdef CONFIG_SERIAL_MULTIPORT
++ multi = &rs_multiport[irq];
++ if (multi->port_monitor)
++ first_multi = inb(multi->port_monitor);
++#endif
++
++ iir = serial_in(info, UART_IIR);
++ do {
++ status = serial_inp(info, UART_LSR);
++#ifdef SERIAL_DEBUG_INTR
++ printk("status = %x...", status);
++#endif
++ if (status & UART_LSR_DR)
++ receive_chars(info, &status, regs);
++ check_modem_status(info);
++#ifdef CONFIG_MELAN
++ if ((status & UART_LSR_THRE) ||
++ /* For buggy ELAN processors */
++ ((iir & UART_IIR_ID) == UART_IIR_THRI))
++ transmit_chars(info, 0);
++#else
++ if (status & UART_LSR_THRE)
++ transmit_chars(info, 0);
++#endif
++ if (pass_counter++ > RS_ISR_PASS_LIMIT) {
++#if SERIAL_DEBUG_INTR
++ printk("rs_single loop break.\n");
++#endif
++ break;
++ }
++ iir = serial_in(info, UART_IIR);
++#ifdef SERIAL_DEBUG_INTR
++ printk("IIR = %x...", iir);
++#endif
++ } while ((iir & UART_IIR_NO_INT) == 0);
++ info->last_active = jiffies;
++#ifdef CONFIG_SERIAL_MULTIPORT
++ if (multi->port_monitor)
++ printk("rs port monitor (single) irq %d: 0x%x, 0x%x\n",
++ info->state->irq, first_multi,
++ inb(multi->port_monitor));
++#endif
++#ifdef SERIAL_DEBUG_INTR
++ printk("end.\n");
++#endif
++}
++
++#ifdef CONFIG_SERIAL_MULTIPORT
++/*
++ * This is the serial driver's for multiport boards
++ */
++static void rs_interrupt_multi(int irq, void *dev_id, struct pt_regs * regs)
++{
++ int status;
++ struct async_struct * info;
++ int pass_counter = 0;
++ int first_multi= 0;
++ struct rs_multiport_struct *multi;
++
++#ifdef SERIAL_DEBUG_INTR
++ printk("rs_interrupt_multi(%d)...", irq);
++#endif
++
++ info = IRQ_ports[irq];
++ if (!info)
++ return;
++ multi = &rs_multiport[irq];
++ if (!multi->port1) {
++ /* Should never happen */
++ printk("rs_interrupt_multi: NULL port1!\n");
++ return;
++ }
++ if (multi->port_monitor)
++ first_multi = inb(multi->port_monitor);
++
++ while (1) {
++ if (!info->tty ||
++ (serial_in(info, UART_IIR) & UART_IIR_NO_INT))
++ goto next;
++
++ info->last_active = jiffies;
++
++ status = serial_inp(info, UART_LSR);
++#ifdef SERIAL_DEBUG_INTR
++ printk("status = %x...", status);
++#endif
++ if (status & UART_LSR_DR)
++ receive_chars(info, &status, regs);
++ check_modem_status(info);
++ if (status & UART_LSR_THRE)
++ transmit_chars(info, 0);
++
++ next:
++ info = info->next_port;
++ if (info)
++ continue;
++
++ info = IRQ_ports[irq];
++ /*
++ * The user was a bonehead, and misconfigured their
++ * multiport info. Rather than lock up the kernel
++ * in an infinite loop, if we loop too many times,
++ * print a message and break out of the loop.
++ */
++ if (pass_counter++ > RS_ISR_PASS_LIMIT) {
++ printk("Misconfigured multiport serial info "
++ "for irq %d. Breaking out irq loop\n", irq);
++ break;
++ }
++ if (multi->port_monitor)
++ printk("rs port monitor irq %d: 0x%x, 0x%x\n",
++ info->state->irq, first_multi,
++ inb(multi->port_monitor));
++ if ((inb(multi->port1) & multi->mask1) != multi->match1)
++ continue;
++ if (!multi->port2)
++ break;
++ if ((inb(multi->port2) & multi->mask2) != multi->match2)
++ continue;
++ if (!multi->port3)
++ break;
++ if ((inb(multi->port3) & multi->mask3) != multi->match3)
++ continue;
++ if (!multi->port4)
++ break;
++ if ((inb(multi->port4) & multi->mask4) != multi->match4)
++ continue;
++ break;
++ }
++#ifdef SERIAL_DEBUG_INTR
++ printk("end.\n");
++#endif
++}
++#endif
++
++/*
++ * -------------------------------------------------------------------
++ * Here ends the serial interrupt routines.
++ * -------------------------------------------------------------------
++ */
++
++/*
++ * This routine is used to handle the "bottom half" processing for the
++ * serial driver, known also the "software interrupt" processing.
++ * This processing is done at the kernel interrupt level, after the
++ * rs_interrupt() has returned, BUT WITH INTERRUPTS TURNED ON. This
++ * is where time-consuming activities which can not be done in the
++ * interrupt driver proper are done; the interrupt driver schedules
++ * them using rs_sched_event(), and they get done here.
++ */
++static void do_serial_bh(void)
++{
++ run_task_queue(&tq_serial);
++}
++
++static void do_softint(void *private_)
++{
++ struct async_struct *info = (struct async_struct *) private_;
++ struct tty_struct *tty;
++
++ tty = info->tty;
++ if (!tty)
++ return;
++
++ if (test_and_clear_bit(RS_EVENT_WRITE_WAKEUP, &info->event)) {
++ tty_wakeup(tty);
++
++#ifdef SERIAL_HAVE_POLL_WAIT
++ wake_up_interruptible(&tty->poll_wait);
++#endif
++ }
++}
++
++/*
++ * This subroutine is called when the RS_TIMER goes off. It is used
++ * by the serial driver to handle ports that do not have an interrupt
++ * (irq=0). This doesn't work very well for 16450's, but gives barely
++ * passable results for a 16550A. (Although at the expense of much
++ * CPU overhead).
++ */
++static void rs_timer(unsigned long dummy)
++{
++ static unsigned long last_strobe;
++ struct async_struct *info;
++ unsigned int i;
++ unsigned long flags;
++
++ if ((jiffies - last_strobe) >= RS_STROBE_TIME) {
++ for (i=0; i < NR_IRQS; i++) {
++ info = IRQ_ports[i];
++ if (!info)
++ continue;
++ save_flags(flags); cli();
++#ifdef CONFIG_SERIAL_SHARE_IRQ
++ if (info->next_port) {
++ do {
++ serial_out(info, UART_IER, 0);
++ info->IER |= UART_IER_THRI;
++ serial_out(info, UART_IER, info->IER);
++ info = info->next_port;
++ } while (info);
++#ifdef CONFIG_SERIAL_MULTIPORT
++ if (rs_multiport[i].port1)
++ rs_interrupt_multi(i, NULL, NULL);
++ else
++#endif
++ rs_interrupt(i, NULL, NULL);
++ } else
++#endif /* CONFIG_SERIAL_SHARE_IRQ */
++ rs_interrupt_single(i, NULL, NULL);
++ restore_flags(flags);
++ }
++ }
++ last_strobe = jiffies;
++ mod_timer(&serial_timer, jiffies + RS_STROBE_TIME);
++
++ if (IRQ_ports[0]) {
++ save_flags(flags); cli();
++#ifdef CONFIG_SERIAL_SHARE_IRQ
++ rs_interrupt(0, NULL, NULL);
++#else
++ rs_interrupt_single(0, NULL, NULL);
++#endif
++ restore_flags(flags);
++
++ mod_timer(&serial_timer, jiffies + IRQ_timeout[0]);
++ }
++}
++
++/*
++ * ---------------------------------------------------------------
++ * Low level utility subroutines for the serial driver: routines to
++ * figure out the appropriate timeout for an interrupt chain, routines
++ * to initialize and startup a serial port, and routines to shutdown a
++ * serial port. Useful stuff like that.
++ * ---------------------------------------------------------------
++ */
++
++/*
++ * This routine figures out the correct timeout for a particular IRQ.
++ * It uses the smallest timeout of all of the serial ports in a
++ * particular interrupt chain. Now only used for IRQ 0....
++ */
++static void figure_IRQ_timeout(int irq)
++{
++ struct async_struct *info;
++ int timeout = 60*HZ; /* 60 seconds === a long time :-) */
++
++ info = IRQ_ports[irq];
++ if (!info) {
++ IRQ_timeout[irq] = 60*HZ;
++ return;
++ }
++ while (info) {
++ if (info->timeout < timeout)
++ timeout = info->timeout;
++ info = info->next_port;
++ }
++ if (!irq)
++ timeout = timeout / 2;
++ IRQ_timeout[irq] = (timeout > 3) ? timeout-2 : 1;
++}
++
++#ifdef CONFIG_SERIAL_RSA
++/* Attempts to turn on the RSA FIFO. Returns zero on failure */
++static int enable_rsa(struct async_struct *info)
++{
++ unsigned char mode;
++ int result;
++ unsigned long flags;
++
++ save_flags(flags); cli();
++ mode = serial_inp(info, UART_RSA_MSR);
++ result = mode & UART_RSA_MSR_FIFO;
++
++ if (!result) {
++ serial_outp(info, UART_RSA_MSR, mode | UART_RSA_MSR_FIFO);
++ mode = serial_inp(info, UART_RSA_MSR);
++ result = mode & UART_RSA_MSR_FIFO;
++ }
++
++ restore_flags(flags);
++ return result;
++}
++
++/* Attempts to turn off the RSA FIFO. Returns zero on failure */
++static int disable_rsa(struct async_struct *info)
++{
++ unsigned char mode;
++ int result;
++ unsigned long flags;
++
++ save_flags(flags); cli();
++ mode = serial_inp(info, UART_RSA_MSR);
++ result = !(mode & UART_RSA_MSR_FIFO);
++
++ if (!result) {
++ serial_outp(info, UART_RSA_MSR, mode & ~UART_RSA_MSR_FIFO);
++ mode = serial_inp(info, UART_RSA_MSR);
++ result = !(mode & UART_RSA_MSR_FIFO);
++ }
++
++ restore_flags(flags);
++ return result;
++}
++#endif /* CONFIG_SERIAL_RSA */
++
++static int startup(struct async_struct * info)
++{
++ unsigned long flags;
++ int retval=0;
++ void (*handler)(int, void *, struct pt_regs *);
++ struct serial_state *state= info->state;
++ unsigned long page;
++#ifdef CONFIG_SERIAL_MANY_PORTS
++ unsigned short ICP;
++#endif
++
++ page = get_zeroed_page(GFP_KERNEL);
++ if (!page)
++ return -ENOMEM;
++
++ save_flags(flags); cli();
++
++ if (info->flags & ASYNC_INITIALIZED) {
++ free_page(page);
++ goto errout;
++ }
++
++ if (!CONFIGURED_SERIAL_PORT(state) || !state->type) {
++ if (info->tty)
++ set_bit(TTY_IO_ERROR, &info->tty->flags);
++ free_page(page);
++ goto errout;
++ }
++ if (info->xmit.buf)
++ free_page(page);
++ else
++ info->xmit.buf = (unsigned char *) page;
++
++#ifdef SERIAL_DEBUG_OPEN
++ printk("starting up ttys%d (irq %d)...", info->line, state->irq);
++#endif
++
++ if (uart_config[state->type].flags & UART_STARTECH) {
++ /* Wake up UART */
++ serial_outp(info, UART_LCR, 0xBF);
++ serial_outp(info, UART_EFR, UART_EFR_ECB);
++ /*
++ * Turn off LCR == 0xBF so we actually set the IER
++ * register on the XR16C850
++ */
++ serial_outp(info, UART_LCR, 0);
++ serial_outp(info, UART_IER, 0);
++ /*
++ * Now reset LCR so we can turn off the ECB bit
++ */
++ serial_outp(info, UART_LCR, 0xBF);
++ serial_outp(info, UART_EFR, 0);
++ /*
++ * For a XR16C850, we need to set the trigger levels
++ */
++ if (state->type == PORT_16850) {
++ serial_outp(info, UART_FCTR, UART_FCTR_TRGD |
++ UART_FCTR_RX);
++ serial_outp(info, UART_TRG, UART_TRG_96);
++ serial_outp(info, UART_FCTR, UART_FCTR_TRGD |
++ UART_FCTR_TX);
++ serial_outp(info, UART_TRG, UART_TRG_96);
++ }
++ serial_outp(info, UART_LCR, 0);
++ }
++
++ if (state->type == PORT_16750) {
++ /* Wake up UART */
++ serial_outp(info, UART_IER, 0);
++ }
++
++ if (state->type == PORT_16C950) {
++ /* Wake up and initialize UART */
++ info->ACR = 0;
++ serial_outp(info, UART_LCR, 0xBF);
++ serial_outp(info, UART_EFR, UART_EFR_ECB);
++ serial_outp(info, UART_IER, 0);
++ serial_outp(info, UART_LCR, 0);
++ serial_icr_write(info, UART_CSR, 0); /* Reset the UART */
++ serial_outp(info, UART_LCR, 0xBF);
++ serial_outp(info, UART_EFR, UART_EFR_ECB);
++ serial_outp(info, UART_LCR, 0);
++ }
++
++#ifdef CONFIG_SERIAL_RSA
++ /*
++ * If this is an RSA port, see if we can kick it up to the
++ * higher speed clock.
++ */
++ if (state->type == PORT_RSA) {
++ if (state->baud_base != SERIAL_RSA_BAUD_BASE &&
++ enable_rsa(info))
++ state->baud_base = SERIAL_RSA_BAUD_BASE;
++ if (state->baud_base == SERIAL_RSA_BAUD_BASE)
++ serial_outp(info, UART_RSA_FRR, 0);
++ }
++#endif
++
++ /*
++ * Clear the FIFO buffers and disable them
++ * (they will be reenabled in change_speed())
++ */
++ if (uart_config[state->type].flags & UART_CLEAR_FIFO) {
++ serial_outp(info, UART_FCR, UART_FCR_ENABLE_FIFO);
++ serial_outp(info, UART_FCR, (UART_FCR_ENABLE_FIFO |
++ UART_FCR_CLEAR_RCVR |
++ UART_FCR_CLEAR_XMIT));
++ serial_outp(info, UART_FCR, 0);
++ }
++
++ /*
++ * Clear the interrupt registers.
++ */
++ (void) serial_inp(info, UART_LSR);
++ (void) serial_inp(info, UART_RX);
++ (void) serial_inp(info, UART_IIR);
++ (void) serial_inp(info, UART_MSR);
++
++ /*
++ * At this point there's no way the LSR could still be 0xFF;
++ * if it is, then bail out, because there's likely no UART
++ * here.
++ */
++ if (!(info->flags & ASYNC_BUGGY_UART) &&
++ (serial_inp(info, UART_LSR) == 0xff)) {
++ printk("ttyS%d: LSR safety check engaged!\n", state->line);
++ if (capable(CAP_SYS_ADMIN)) {
++ if (info->tty)
++ set_bit(TTY_IO_ERROR, &info->tty->flags);
++ } else
++ retval = -ENODEV;
++ goto errout;
++ }
++
++ /*
++ * Allocate the IRQ if necessary
++ */
++ if (state->irq && (!IRQ_ports[state->irq] ||
++ !IRQ_ports[state->irq]->next_port)) {
++ if (IRQ_ports[state->irq]) {
++#ifdef CONFIG_SERIAL_SHARE_IRQ
++ free_irq(state->irq, &IRQ_ports[state->irq]);
++#ifdef CONFIG_SERIAL_MULTIPORT
++ if (rs_multiport[state->irq].port1)
++ handler = rs_interrupt_multi;
++ else
++#endif
++ handler = rs_interrupt;
++#else
++ retval = -EBUSY;
++ goto errout;
++#endif /* CONFIG_SERIAL_SHARE_IRQ */
++ } else
++ handler = rs_interrupt_single;
++
++ retval = request_irq(state->irq, handler, SA_SHIRQ,
++ "serial", &IRQ_ports[state->irq]);
++ if (retval) {
++ if (capable(CAP_SYS_ADMIN)) {
++ if (info->tty)
++ set_bit(TTY_IO_ERROR,
++ &info->tty->flags);
++ retval = 0;
++ }
++ goto errout;
++ }
++ }
++
++ /*
++ * Insert serial port into IRQ chain.
++ */
++ info->prev_port = 0;
++ info->next_port = IRQ_ports[state->irq];
++ if (info->next_port)
++ info->next_port->prev_port = info;
++ IRQ_ports[state->irq] = info;
++ figure_IRQ_timeout(state->irq);
++
++ /*
++ * Now, initialize the UART
++ */
++ serial_outp(info, UART_LCR, UART_LCR_WLEN8); /* reset DLAB */
++
++ info->MCR = 0;
++ if (info->tty->termios->c_cflag & CBAUD)
++ info->MCR = UART_MCR_DTR | UART_MCR_RTS;
++#ifdef CONFIG_SERIAL_MANY_PORTS
++ if (info->flags & ASYNC_FOURPORT) {
++ if (state->irq == 0)
++ info->MCR |= UART_MCR_OUT1;
++ } else
++#endif
++ {
++ if (state->irq != 0)
++ info->MCR |= UART_MCR_OUT2;
++ }
++ info->MCR |= ALPHA_KLUDGE_MCR; /* Don't ask */
++ serial_outp(info, UART_MCR, info->MCR);
++
++ /*
++ * Finally, enable interrupts
++ */
++ info->IER = UART_IER_MSI | UART_IER_RLSI | UART_IER_RDI;
++ serial_outp(info, UART_IER, info->IER); /* enable interrupts */
++
++#ifdef CONFIG_SERIAL_MANY_PORTS
++ if (info->flags & ASYNC_FOURPORT) {
++ /* Enable interrupts on the AST Fourport board */
++ ICP = (info->port & 0xFE0) | 0x01F;
++ outb_p(0x80, ICP);
++ (void) inb_p(ICP);
++ }
++#endif
++
++ /*
++ * And clear the interrupt registers again for luck.
++ */
++ (void)serial_inp(info, UART_LSR);
++ (void)serial_inp(info, UART_RX);
++ (void)serial_inp(info, UART_IIR);
++ (void)serial_inp(info, UART_MSR);
++
++ if (info->tty)
++ clear_bit(TTY_IO_ERROR, &info->tty->flags);
++ info->xmit.head = info->xmit.tail = 0;
++
++ /*
++ * Set up serial timers...
++ */
++ mod_timer(&serial_timer, jiffies + 2*HZ/100);
++
++ /*
++ * Set up the tty->alt_speed kludge
++ */
++#if (LINUX_VERSION_CODE >= 131394) /* Linux 2.1.66 */
++ if (info->tty) {
++ if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
++ info->tty->alt_speed = 57600;
++ if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
++ info->tty->alt_speed = 115200;
++ if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
++ info->tty->alt_speed = 230400;
++ if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
++ info->tty->alt_speed = 460800;
++ }
++#endif
++
++ /*
++ * and set the speed of the serial port
++ */
++ change_speed(info, 0);
++
++ info->flags |= ASYNC_INITIALIZED;
++ restore_flags(flags);
++ return 0;
++
++errout:
++ restore_flags(flags);
++ return retval;
++}
++
++/*
++ * This routine will shutdown a serial port; interrupts are disabled, and
++ * DTR is dropped if the hangup on close termio flag is on.
++ */
++static void shutdown(struct async_struct * info)
++{
++ unsigned long flags;
++ struct serial_state *state;
++ int retval;
++
++ if (!(info->flags & ASYNC_INITIALIZED))
++ return;
++
++ state = info->state;
++
++#ifdef SERIAL_DEBUG_OPEN
++ printk("Shutting down serial port %d (irq %d)....", info->line,
++ state->irq);
++#endif
++
++ save_flags(flags); cli(); /* Disable interrupts */
++
++ /*
++ * clear delta_msr_wait queue to avoid mem leaks: we may free the irq
++ * here so the queue might never be waken up
++ */
++ wake_up_interruptible(&info->delta_msr_wait);
++
++ /*
++ * First unlink the serial port from the IRQ chain...
++ */
++ if (info->next_port)
++ info->next_port->prev_port = info->prev_port;
++ if (info->prev_port)
++ info->prev_port->next_port = info->next_port;
++ else
++ IRQ_ports[state->irq] = info->next_port;
++ figure_IRQ_timeout(state->irq);
++
++ /*
++ * Free the IRQ, if necessary
++ */
++ if (state->irq && (!IRQ_ports[state->irq] ||
++ !IRQ_ports[state->irq]->next_port)) {
++ if (IRQ_ports[state->irq]) {
++ free_irq(state->irq, &IRQ_ports[state->irq]);
++ retval = request_irq(state->irq, rs_interrupt_single,
++ SA_SHIRQ, "serial",
++ &IRQ_ports[state->irq]);
++
++ if (retval)
++ printk("serial shutdown: request_irq: error %d"
++ " Couldn't reacquire IRQ.\n", retval);
++ } else
++ free_irq(state->irq, &IRQ_ports[state->irq]);
++ }
++
++ if (info->xmit.buf) {
++ unsigned long pg = (unsigned long) info->xmit.buf;
++ info->xmit.buf = 0;
++ free_page(pg);
++ }
++
++ info->IER = 0;
++ serial_outp(info, UART_IER, 0x00); /* disable all intrs */
++#ifdef CONFIG_SERIAL_MANY_PORTS
++ if (info->flags & ASYNC_FOURPORT) {
++ /* reset interrupts on the AST Fourport board */
++ (void) inb((info->port & 0xFE0) | 0x01F);
++ info->MCR |= UART_MCR_OUT1;
++ } else
++#endif
++ info->MCR &= ~UART_MCR_OUT2;
++ info->MCR |= ALPHA_KLUDGE_MCR; /* Don't ask */
++
++ /* disable break condition */
++ serial_out(info, UART_LCR, serial_inp(info, UART_LCR) & ~UART_LCR_SBC);
++
++ if (!info->tty || (info->tty->termios->c_cflag & HUPCL))
++ info->MCR &= ~(UART_MCR_DTR|UART_MCR_RTS);
++ serial_outp(info, UART_MCR, info->MCR);
++
++ /* disable FIFO's */
++ serial_outp(info, UART_FCR, (UART_FCR_ENABLE_FIFO |
++ UART_FCR_CLEAR_RCVR |
++ UART_FCR_CLEAR_XMIT));
++ serial_outp(info, UART_FCR, 0);
++
++#ifdef CONFIG_SERIAL_RSA
++ /*
++ * Reset the RSA board back to 115kbps compat mode.
++ */
++ if ((state->type == PORT_RSA) &&
++ (state->baud_base == SERIAL_RSA_BAUD_BASE &&
++ disable_rsa(info)))
++ state->baud_base = SERIAL_RSA_BAUD_BASE_LO;
++#endif
++
++
++ (void)serial_in(info, UART_RX); /* read data port to reset things */
++
++ if (info->tty)
++ set_bit(TTY_IO_ERROR, &info->tty->flags);
++
++ if (uart_config[info->state->type].flags & UART_STARTECH) {
++ /* Arrange to enter sleep mode */
++ serial_outp(info, UART_LCR, 0xBF);
++ serial_outp(info, UART_EFR, UART_EFR_ECB);
++ serial_outp(info, UART_LCR, 0);
++ serial_outp(info, UART_IER, UART_IERX_SLEEP);
++ serial_outp(info, UART_LCR, 0xBF);
++ serial_outp(info, UART_EFR, 0);
++ serial_outp(info, UART_LCR, 0);
++ }
++ if (info->state->type == PORT_16750) {
++ /* Arrange to enter sleep mode */
++ serial_outp(info, UART_IER, UART_IERX_SLEEP);
++ }
++ info->flags &= ~ASYNC_INITIALIZED;
++ restore_flags(flags);
++}
++
++#if (LINUX_VERSION_CODE < 131394) /* Linux 2.1.66 */
++static int baud_table[] = {
++ 0, 50, 75, 110, 134, 150, 200, 300,
++ 600, 1200, 1800, 2400, 4800, 9600, 19200,
++ 38400, 57600, 115200, 230400, 460800, 0 };
++
++static int tty_get_baud_rate(struct tty_struct *tty)
++{
++ struct async_struct * info = (struct async_struct *)tty->driver_data;
++ unsigned int cflag, i;
++
++ cflag = tty->termios->c_cflag;
++
++ i = cflag & CBAUD;
++ if (i & CBAUDEX) {
++ i &= ~CBAUDEX;
++ if (i < 1 || i > 2)
++ tty->termios->c_cflag &= ~CBAUDEX;
++ else
++ i += 15;
++ }
++ if (i == 15) {
++ if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
++ i += 1;
++ if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
++ i += 2;
++ }
++ return baud_table[i];
++}
++#endif
++
++/*
++ * This routine is called to set the UART divisor registers to match
++ * the specified baud rate for a serial port.
++ */
++static void change_speed(struct async_struct *info,
++ struct termios *old_termios)
++{
++ int quot = 0, baud_base, baud;
++ unsigned cflag, cval, fcr = 0;
++ int bits;
++ unsigned long flags;
++
++ if (!info->tty || !info->tty->termios)
++ return;
++ cflag = info->tty->termios->c_cflag;
++ if (!CONFIGURED_SERIAL_PORT(info))
++ return;
++
++ /* byte size and parity */
++ switch (cflag & CSIZE) {
++ case CS5: cval = 0x00; bits = 7; break;
++ case CS6: cval = 0x01; bits = 8; break;
++ case CS7: cval = 0x02; bits = 9; break;
++ case CS8: cval = 0x03; bits = 10; break;
++ /* Never happens, but GCC is too dumb to figure it out */
++ default: cval = 0x00; bits = 7; break;
++ }
++ if (cflag & CSTOPB) {
++ cval |= 0x04;
++ bits++;
++ }
++ if (cflag & PARENB) {
++ cval |= UART_LCR_PARITY;
++ bits++;
++ }
++ if (!(cflag & PARODD))
++ cval |= UART_LCR_EPAR;
++#ifdef CMSPAR
++ if (cflag & CMSPAR)
++ cval |= UART_LCR_SPAR;
++#endif
++
++ /* Determine divisor based on baud rate */
++ baud = tty_get_baud_rate(info->tty);
++ if (!baud)
++ baud = 9600; /* B0 transition handled in rs_set_termios */
++#ifdef CONFIG_SERIAL_RSA
++ if ((info->state->type == PORT_RSA) &&
++ (info->state->baud_base != SERIAL_RSA_BAUD_BASE) &&
++ enable_rsa(info))
++ info->state->baud_base = SERIAL_RSA_BAUD_BASE;
++#endif
++ baud_base = info->state->baud_base;
++ if (info->state->type == PORT_16C950) {
++ if (baud <= baud_base)
++ serial_icr_write(info, UART_TCR, 0);
++ else if (baud <= 2*baud_base) {
++ serial_icr_write(info, UART_TCR, 0x8);
++ baud_base = baud_base * 2;
++ } else if (baud <= 4*baud_base) {
++ serial_icr_write(info, UART_TCR, 0x4);
++ baud_base = baud_base * 4;
++ } else
++ serial_icr_write(info, UART_TCR, 0);
++ }
++ if (baud == 38400 &&
++ ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST))
++ quot = info->state->custom_divisor;
++ else {
++ if (baud == 134)
++ /* Special case since 134 is really 134.5 */
++ quot = (2*baud_base / 269);
++ else if (baud)
++ quot = baud_base / baud;
++ }
++ /* If the quotient is zero refuse the change */
++ if (!quot && old_termios) {
++ info->tty->termios->c_cflag &= ~CBAUD;
++ info->tty->termios->c_cflag |= (old_termios->c_cflag & CBAUD);
++ baud = tty_get_baud_rate(info->tty);
++ if (!baud)
++ baud = 9600;
++ if (baud == 38400 &&
++ ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST))
++ quot = info->state->custom_divisor;
++ else {
++ if (baud == 134)
++ /* Special case since 134 is really 134.5 */
++ quot = (2*baud_base / 269);
++ else if (baud)
++ quot = baud_base / baud;
++ }
++ }
++ /* As a last resort, if the quotient is zero, default to 9600 bps */
++ if (!quot)
++ quot = baud_base / 9600;
++ /*
++ * Work around a bug in the Oxford Semiconductor 952 rev B
++ * chip which causes it to seriously miscalculate baud rates
++ * when DLL is 0.
++ */
++ if (((quot & 0xFF) == 0) && (info->state->type == PORT_16C950) &&
++ (info->state->revision == 0x5201))
++ quot++;
++
++ info->quot = quot;
++ info->timeout = ((info->xmit_fifo_size*HZ*bits*quot) / baud_base);
++ info->timeout += HZ/50; /* Add .02 seconds of slop */
++
++ /* Set up FIFO's */
++ if (uart_config[info->state->type].flags & UART_USE_FIFO) {
++ if ((info->state->baud_base / quot) < 2400)
++ fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_1;
++#ifdef CONFIG_SERIAL_RSA
++ else if (info->state->type == PORT_RSA)
++ fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_14;
++#endif
++ else
++ fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_8;
++ }
++ if (info->state->type == PORT_16750)
++ fcr |= UART_FCR7_64BYTE;
++
++ /* CTS flow control flag and modem status interrupts */
++ info->IER &= ~UART_IER_MSI;
++ if (info->flags & ASYNC_HARDPPS_CD)
++ info->IER |= UART_IER_MSI;
++ if (cflag & CRTSCTS) {
++ info->flags |= ASYNC_CTS_FLOW;
++ info->IER |= UART_IER_MSI;
++ } else
++ info->flags &= ~ASYNC_CTS_FLOW;
++ if (cflag & CLOCAL)
++ info->flags &= ~ASYNC_CHECK_CD;
++ else {
++ info->flags |= ASYNC_CHECK_CD;
++ info->IER |= UART_IER_MSI;
++ }
++ serial_out(info, UART_IER, info->IER);
++
++ /*
++ * Set up parity check flag
++ */
++#define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
++
++ info->read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR;
++ if (I_INPCK(info->tty))
++ info->read_status_mask |= UART_LSR_FE | UART_LSR_PE;
++ if (I_BRKINT(info->tty) || I_PARMRK(info->tty))
++ info->read_status_mask |= UART_LSR_BI;
++
++ /*
++ * Characters to ignore
++ */
++ info->ignore_status_mask = 0;
++ if (I_IGNPAR(info->tty))
++ info->ignore_status_mask |= UART_LSR_PE | UART_LSR_FE;
++ if (I_IGNBRK(info->tty)) {
++ info->ignore_status_mask |= UART_LSR_BI;
++ /*
++ * If we're ignore parity and break indicators, ignore
++ * overruns too. (For real raw support).
++ */
++ if (I_IGNPAR(info->tty))
++ info->ignore_status_mask |= UART_LSR_OE;
++ }
++ /*
++ * !!! ignore all characters if CREAD is not set
++ */
++ if ((cflag & CREAD) == 0)
++ info->ignore_status_mask |= UART_LSR_DR;
++ save_flags(flags); cli();
++ if (uart_config[info->state->type].flags & UART_STARTECH) {
++ serial_outp(info, UART_LCR, 0xBF);
++ serial_outp(info, UART_EFR,
++ (cflag & CRTSCTS) ? UART_EFR_CTS : 0);
++ }
++ serial_outp(info, UART_LCR, cval | UART_LCR_DLAB); /* set DLAB */
++ serial_outp(info, UART_DLL, quot & 0xff); /* LS of divisor */
++ serial_outp(info, UART_DLM, quot >> 8); /* MS of divisor */
++ if (info->state->type == PORT_16750)
++ serial_outp(info, UART_FCR, fcr); /* set fcr */
++ serial_outp(info, UART_LCR, cval); /* reset DLAB */
++ info->LCR = cval; /* Save LCR */
++ if (info->state->type != PORT_16750) {
++ if (fcr & UART_FCR_ENABLE_FIFO) {
++ /* emulated UARTs (Lucent Venus 167x) need two steps */
++ serial_outp(info, UART_FCR, UART_FCR_ENABLE_FIFO);
++ }
++ serial_outp(info, UART_FCR, fcr); /* set fcr */
++ }
++ restore_flags(flags);
++}
++
++static void rs_put_char(struct tty_struct *tty, unsigned char ch)
++{
++ struct async_struct *info = (struct async_struct *)tty->driver_data;
++ unsigned long flags;
++
++ if (serial_paranoia_check(info, tty->device, "rs_put_char"))
++ return;
++
++ if (!tty || !info->xmit.buf)
++ return;
++
++ save_flags(flags); cli();
++ if (CIRC_SPACE(info->xmit.head,
++ info->xmit.tail,
++ SERIAL_XMIT_SIZE) == 0) {
++ restore_flags(flags);
++ return;
++ }
++
++ info->xmit.buf[info->xmit.head] = ch;
++ info->xmit.head = (info->xmit.head + 1) & (SERIAL_XMIT_SIZE-1);
++ restore_flags(flags);
++}
++
++static void rs_flush_chars(struct tty_struct *tty)
++{
++ struct async_struct *info = (struct async_struct *)tty->driver_data;
++ unsigned long flags;
++
++ if (serial_paranoia_check(info, tty->device, "rs_flush_chars"))
++ return;
++
++ if (info->xmit.head == info->xmit.tail
++ || tty->stopped
++ || tty->hw_stopped
++ || !info->xmit.buf)
++ return;
++
++ save_flags(flags); cli();
++ info->IER |= UART_IER_THRI;
++ serial_out(info, UART_IER, info->IER);
++ restore_flags(flags);
++}
++
++static int rs_write(struct tty_struct * tty, int from_user,
++ const unsigned char *buf, int count)
++{
++ int c, ret = 0;
++ struct async_struct *info = (struct async_struct *)tty->driver_data;
++ unsigned long flags;
++
++ if (serial_paranoia_check(info, tty->device, "rs_write"))
++ return 0;
++
++ if (!tty || !info->xmit.buf || !tmp_buf)
++ return 0;
++
++ save_flags(flags);
++ if (from_user) {
++ down(&tmp_buf_sem);
++ while (1) {
++ int c1;
++ c = CIRC_SPACE_TO_END(info->xmit.head,
++ info->xmit.tail,
++ SERIAL_XMIT_SIZE);
++ if (count < c)
++ c = count;
++ if (c <= 0)
++ break;
++
++ c -= copy_from_user(tmp_buf, buf, c);
++ if (!c) {
++ if (!ret)
++ ret = -EFAULT;
++ break;
++ }
++ cli();
++ c1 = CIRC_SPACE_TO_END(info->xmit.head,
++ info->xmit.tail,
++ SERIAL_XMIT_SIZE);
++ if (c1 < c)
++ c = c1;
++ memcpy(info->xmit.buf + info->xmit.head, tmp_buf, c);
++ info->xmit.head = ((info->xmit.head + c) &
++ (SERIAL_XMIT_SIZE-1));
++ restore_flags(flags);
++ buf += c;
++ count -= c;
++ ret += c;
++ }
++ up(&tmp_buf_sem);
++ } else {
++ cli();
++ while (1) {
++ c = CIRC_SPACE_TO_END(info->xmit.head,
++ info->xmit.tail,
++ SERIAL_XMIT_SIZE);
++ if (count < c)
++ c = count;
++ if (c <= 0) {
++ break;
++ }
++ memcpy(info->xmit.buf + info->xmit.head, buf, c);
++ info->xmit.head = ((info->xmit.head + c) &
++ (SERIAL_XMIT_SIZE-1));
++ buf += c;
++ count -= c;
++ ret += c;
++ }
++ restore_flags(flags);
++ }
++ if (info->xmit.head != info->xmit.tail
++ && !tty->stopped
++ && !tty->hw_stopped
++ && !(info->IER & UART_IER_THRI)) {
++ info->IER |= UART_IER_THRI;
++ serial_out(info, UART_IER, info->IER);
++ }
++ return ret;
++}
++
++static int rs_write_room(struct tty_struct *tty)
++{
++ struct async_struct *info = (struct async_struct *)tty->driver_data;
++
++ if (serial_paranoia_check(info, tty->device, "rs_write_room"))
++ return 0;
++ return CIRC_SPACE(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE);
++}
++
++static int rs_chars_in_buffer(struct tty_struct *tty)
++{
++ struct async_struct *info = (struct async_struct *)tty->driver_data;
++
++ if (serial_paranoia_check(info, tty->device, "rs_chars_in_buffer"))
++ return 0;
++ return CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE);
++}
++
++static void rs_flush_buffer(struct tty_struct *tty)
++{
++ struct async_struct *info = (struct async_struct *)tty->driver_data;
++ unsigned long flags;
++
++ if (serial_paranoia_check(info, tty->device, "rs_flush_buffer"))
++ return;
++ save_flags(flags); cli();
++ info->xmit.head = info->xmit.tail = 0;
++ restore_flags(flags);
++#ifdef SERIAL_HAVE_POLL_WAIT
++ wake_up_interruptible(&tty->poll_wait);
++#endif
++ tty_wakeup(tty);
++}
++
++/*
++ * This function is used to send a high-priority XON/XOFF character to
++ * the device
++ */
++static void rs_send_xchar(struct tty_struct *tty, char ch)
++{
++ struct async_struct *info = (struct async_struct *)tty->driver_data;
++
++ if (serial_paranoia_check(info, tty->device, "rs_send_char"))
++ return;
++
++ info->x_char = ch;
++ if (ch) {
++ /* Make sure transmit interrupts are on */
++ info->IER |= UART_IER_THRI;
++ serial_out(info, UART_IER, info->IER);
++ }
++}
++
++/*
++ * ------------------------------------------------------------
++ * rs_throttle()
++ *
++ * This routine is called by the upper-layer tty layer to signal that
++ * incoming characters should be throttled.
++ * ------------------------------------------------------------
++ */
++static void rs_throttle(struct tty_struct * tty)
++{
++ struct async_struct *info = (struct async_struct *)tty->driver_data;
++ unsigned long flags;
++#ifdef SERIAL_DEBUG_THROTTLE
++ char buf[64];
++
++ printk("throttle %s: %d....\n", tty_name(tty, buf),
++ tty->ldisc.chars_in_buffer(tty));
++#endif
++
++ if (serial_paranoia_check(info, tty->device, "rs_throttle"))
++ return;
++
++ if (I_IXOFF(tty))
++ rs_send_xchar(tty, STOP_CHAR(tty));
++
++ if (tty->termios->c_cflag & CRTSCTS)
++ info->MCR &= ~UART_MCR_RTS;
++
++ save_flags(flags); cli();
++ serial_out(info, UART_MCR, info->MCR);
++ restore_flags(flags);
++}
++
++static void rs_unthrottle(struct tty_struct * tty)
++{
++ struct async_struct *info = (struct async_struct *)tty->driver_data;
++ unsigned long flags;
++#ifdef SERIAL_DEBUG_THROTTLE
++ char buf[64];
++
++ printk("unthrottle %s: %d....\n", tty_name(tty, buf),
++ tty->ldisc.chars_in_buffer(tty));
++#endif
++
++ if (serial_paranoia_check(info, tty->device, "rs_unthrottle"))
++ return;
++
++ if (I_IXOFF(tty)) {
++ if (info->x_char)
++ info->x_char = 0;
++ else
++ rs_send_xchar(tty, START_CHAR(tty));
++ }
++ if (tty->termios->c_cflag & CRTSCTS)
++ info->MCR |= UART_MCR_RTS;
++ save_flags(flags); cli();
++ serial_out(info, UART_MCR, info->MCR);
++ restore_flags(flags);
++}
++
++/*
++ * ------------------------------------------------------------
++ * rs_ioctl() and friends
++ * ------------------------------------------------------------
++ */
++
++static int get_serial_info(struct async_struct * info,
++ struct serial_struct * retinfo)
++{
++ struct serial_struct tmp;
++ struct serial_state *state = info->state;
++
++ if (!retinfo)
++ return -EFAULT;
++ memset(&tmp, 0, sizeof(tmp));
++ tmp.type = state->type;
++ tmp.line = state->line;
++ tmp.port = state->port;
++ if (HIGH_BITS_OFFSET)
++ tmp.port_high = state->port >> HIGH_BITS_OFFSET;
++ else
++ tmp.port_high = 0;
++ tmp.irq = state->irq;
++ tmp.flags = state->flags;
++ tmp.xmit_fifo_size = state->xmit_fifo_size;
++ tmp.baud_base = state->baud_base;
++ tmp.close_delay = state->close_delay;
++ tmp.closing_wait = state->closing_wait;
++ tmp.custom_divisor = state->custom_divisor;
++ tmp.hub6 = state->hub6;
++ tmp.io_type = state->io_type;
++ if (copy_to_user(retinfo,&tmp,sizeof(*retinfo)))
++ return -EFAULT;
++ return 0;
++}
++
++static int set_serial_info(struct async_struct * info,
++ struct serial_struct * new_info)
++{
++ struct serial_struct new_serial;
++ struct serial_state old_state, *state;
++ unsigned int i,change_irq,change_port;
++ int retval = 0;
++ unsigned long new_port;
++
++ if (copy_from_user(&new_serial,new_info,sizeof(new_serial)))
++ return -EFAULT;
++ state = info->state;
++ old_state = *state;
++
++ new_port = new_serial.port;
++ if (HIGH_BITS_OFFSET)
++ new_port += (unsigned long) new_serial.port_high << HIGH_BITS_OFFSET;
++
++ change_irq = new_serial.irq != state->irq;
++ change_port = (new_port != ((int) state->port)) ||
++ (new_serial.hub6 != state->hub6);
++
++ if (!capable(CAP_SYS_ADMIN)) {
++ if (change_irq || change_port ||
++ (new_serial.baud_base != state->baud_base) ||
++ (new_serial.type != state->type) ||
++ (new_serial.close_delay != state->close_delay) ||
++ (new_serial.xmit_fifo_size != state->xmit_fifo_size) ||
++ ((new_serial.flags & ~ASYNC_USR_MASK) !=
++ (state->flags & ~ASYNC_USR_MASK)))
++ return -EPERM;
++ state->flags = ((state->flags & ~ASYNC_USR_MASK) |
++ (new_serial.flags & ASYNC_USR_MASK));
++ info->flags = ((info->flags & ~ASYNC_USR_MASK) |
++ (new_serial.flags & ASYNC_USR_MASK));
++ state->custom_divisor = new_serial.custom_divisor;
++ goto check_and_exit;
++ }
++
++ new_serial.irq = irq_cannonicalize(new_serial.irq);
++
++ if ((new_serial.irq >= NR_IRQS) || (new_serial.irq < 0) ||
++ (new_serial.baud_base < 9600)|| (new_serial.type < PORT_UNKNOWN) ||
++ (new_serial.type > PORT_MAX) || (new_serial.type == PORT_CIRRUS) ||
++ (new_serial.type == PORT_STARTECH)) {
++ return -EINVAL;
++ }
++
++ if ((new_serial.type != state->type) ||
++ (new_serial.xmit_fifo_size <= 0))
++ new_serial.xmit_fifo_size =
++ uart_config[new_serial.type].dfl_xmit_fifo_size;
++
++ /* Make sure address is not already in use */
++ if (new_serial.type) {
++ for (i = 0 ; i < NR_PORTS; i++)
++ if ((state != &rs_table[i]) &&
++ (rs_table[i].io_type == SERIAL_IO_PORT) &&
++ (rs_table[i].port == new_port) &&
++ rs_table[i].type)
++ return -EADDRINUSE;
++ }
++
++ if ((change_port || change_irq) && (state->count > 1))
++ return -EBUSY;
++
++ /*
++ * OK, past this point, all the error checking has been done.
++ * At this point, we start making changes.....
++ */
++
++ state->baud_base = new_serial.baud_base;
++ state->flags = ((state->flags & ~ASYNC_FLAGS) |
++ (new_serial.flags & ASYNC_FLAGS));
++ info->flags = ((state->flags & ~ASYNC_INTERNAL_FLAGS) |
++ (info->flags & ASYNC_INTERNAL_FLAGS));
++ state->custom_divisor = new_serial.custom_divisor;
++ state->close_delay = new_serial.close_delay * HZ/100;
++ state->closing_wait = new_serial.closing_wait * HZ/100;
++#if (LINUX_VERSION_CODE > 0x20100)
++ info->tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
++#endif
++ info->xmit_fifo_size = state->xmit_fifo_size =
++ new_serial.xmit_fifo_size;
++
++ if ((state->type != PORT_UNKNOWN) && state->port) {
++#ifdef CONFIG_SERIAL_RSA
++ if (old_state.type == PORT_RSA)
++ release_region(state->port + UART_RSA_BASE, 16);
++ else
++#endif
++ release_region(state->port,8);
++ }
++ state->type = new_serial.type;
++ if (change_port || change_irq) {
++ /*
++ * We need to shutdown the serial port at the old
++ * port/irq combination.
++ */
++ shutdown(info);
++ state->irq = new_serial.irq;
++ info->port = state->port = new_port;
++ info->hub6 = state->hub6 = new_serial.hub6;
++ if (info->hub6)
++ info->io_type = state->io_type = SERIAL_IO_HUB6;
++ else if (info->io_type == SERIAL_IO_HUB6)
++ info->io_type = state->io_type = SERIAL_IO_PORT;
++ }
++ if ((state->type != PORT_UNKNOWN) && state->port) {
++#ifdef CONFIG_SERIAL_RSA
++ if (state->type == PORT_RSA)
++ request_region(state->port + UART_RSA_BASE,
++ 16, "serial_rsa(set)");
++ else
++#endif
++ request_region(state->port,8,"serial(set)");
++ }
++
++
++check_and_exit:
++ if ((!state->port && !state->iomem_base) || !state->type)
++ return 0;
++ if (info->flags & ASYNC_INITIALIZED) {
++ if (((old_state.flags & ASYNC_SPD_MASK) !=
++ (state->flags & ASYNC_SPD_MASK)) ||
++ (old_state.custom_divisor != state->custom_divisor)) {
++#if (LINUX_VERSION_CODE >= 131394) /* Linux 2.1.66 */
++ if ((state->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
++ info->tty->alt_speed = 57600;
++ if ((state->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
++ info->tty->alt_speed = 115200;
++ if ((state->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
++ info->tty->alt_speed = 230400;
++ if ((state->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
++ info->tty->alt_speed = 460800;
++#endif
++ change_speed(info, 0);
++ }
++ } else
++ retval = startup(info);
++ return retval;
++}
++
++
++/*
++ * get_lsr_info - get line status register info
++ *
++ * Purpose: Let user call ioctl() to get info when the UART physically
++ * is emptied. On bus types like RS485, the transmitter must
++ * release the bus after transmitting. This must be done when
++ * the transmit shift register is empty, not be done when the
++ * transmit holding register is empty. This functionality
++ * allows an RS485 driver to be written in user space.
++ */
++static int get_lsr_info(struct async_struct * info, unsigned int *value)
++{
++ unsigned char status;
++ unsigned int result;
++ unsigned long flags;
++
++ save_flags(flags); cli();
++ status = serial_in(info, UART_LSR);
++ restore_flags(flags);
++ result = ((status & UART_LSR_TEMT) ? TIOCSER_TEMT : 0);
++
++ /*
++ * If we're about to load something into the transmit
++ * register, we'll pretend the transmitter isn't empty to
++ * avoid a race condition (depending on when the transmit
++ * interrupt happens).
++ */
++ if (info->x_char ||
++ ((CIRC_CNT(info->xmit.head, info->xmit.tail,
++ SERIAL_XMIT_SIZE) > 0) &&
++ !info->tty->stopped && !info->tty->hw_stopped))
++ result &= ~TIOCSER_TEMT;
++
++ if (copy_to_user(value, &result, sizeof(int)))
++ return -EFAULT;
++ return 0;
++}
++
++
++static int get_modem_info(struct async_struct * info, unsigned int *value)
++{
++ unsigned char control, status;
++ unsigned int result;
++ unsigned long flags;
++
++ control = info->MCR;
++ save_flags(flags); cli();
++ status = serial_in(info, UART_MSR);
++ restore_flags(flags);
++ result = ((control & UART_MCR_RTS) ? TIOCM_RTS : 0)
++ | ((control & UART_MCR_DTR) ? TIOCM_DTR : 0)
++#ifdef TIOCM_OUT1
++ | ((control & UART_MCR_OUT1) ? TIOCM_OUT1 : 0)
++ | ((control & UART_MCR_OUT2) ? TIOCM_OUT2 : 0)
++#endif
++ | ((status & UART_MSR_DCD) ? TIOCM_CAR : 0)
++ | ((status & UART_MSR_RI) ? TIOCM_RNG : 0)
++ | ((status & UART_MSR_DSR) ? TIOCM_DSR : 0)
++ | ((status & UART_MSR_CTS) ? TIOCM_CTS : 0);
++
++ if (copy_to_user(value, &result, sizeof(int)))
++ return -EFAULT;
++ return 0;
++}
++
++static int set_modem_info(struct async_struct * info, unsigned int cmd,
++ unsigned int *value)
++{
++ unsigned int arg;
++ unsigned long flags;
++
++ if (copy_from_user(&arg, value, sizeof(int)))
++ return -EFAULT;
++
++ switch (cmd) {
++ case TIOCMBIS:
++ if (arg & TIOCM_RTS)
++ info->MCR |= UART_MCR_RTS;
++ if (arg & TIOCM_DTR)
++ info->MCR |= UART_MCR_DTR;
++#ifdef TIOCM_OUT1
++ if (arg & TIOCM_OUT1)
++ info->MCR |= UART_MCR_OUT1;
++ if (arg & TIOCM_OUT2)
++ info->MCR |= UART_MCR_OUT2;
++#endif
++ if (arg & TIOCM_LOOP)
++ info->MCR |= UART_MCR_LOOP;
++ break;
++ case TIOCMBIC:
++ if (arg & TIOCM_RTS)
++ info->MCR &= ~UART_MCR_RTS;
++ if (arg & TIOCM_DTR)
++ info->MCR &= ~UART_MCR_DTR;
++#ifdef TIOCM_OUT1
++ if (arg & TIOCM_OUT1)
++ info->MCR &= ~UART_MCR_OUT1;
++ if (arg & TIOCM_OUT2)
++ info->MCR &= ~UART_MCR_OUT2;
++#endif
++ if (arg & TIOCM_LOOP)
++ info->MCR &= ~UART_MCR_LOOP;
++ break;
++ case TIOCMSET:
++ info->MCR = ((info->MCR & ~(UART_MCR_RTS |
++#ifdef TIOCM_OUT1
++ UART_MCR_OUT1 |
++ UART_MCR_OUT2 |
++#endif
++ UART_MCR_LOOP |
++ UART_MCR_DTR))
++ | ((arg & TIOCM_RTS) ? UART_MCR_RTS : 0)
++#ifdef TIOCM_OUT1
++ | ((arg & TIOCM_OUT1) ? UART_MCR_OUT1 : 0)
++ | ((arg & TIOCM_OUT2) ? UART_MCR_OUT2 : 0)
++#endif
++ | ((arg & TIOCM_LOOP) ? UART_MCR_LOOP : 0)
++ | ((arg & TIOCM_DTR) ? UART_MCR_DTR : 0));
++ break;
++ default:
++ return -EINVAL;
++ }
++ save_flags(flags); cli();
++ info->MCR |= ALPHA_KLUDGE_MCR; /* Don't ask */
++ serial_out(info, UART_MCR, info->MCR);
++ restore_flags(flags);
++ return 0;
++}
++
++static int do_autoconfig(struct async_struct * info)
++{
++ int irq, retval;
++
++ if (!capable(CAP_SYS_ADMIN))
++ return -EPERM;
++
++ if (info->state->count > 1)
++ return -EBUSY;
++
++ shutdown(info);
++
++ autoconfig(info->state);
++ if ((info->state->flags & ASYNC_AUTO_IRQ) &&
++ (info->state->port != 0 || info->state->iomem_base != 0) &&
++ (info->state->type != PORT_UNKNOWN)) {
++ irq = detect_uart_irq(info->state);
++ if (irq > 0)
++ info->state->irq = irq;
++ }
++
++ retval = startup(info);
++ if (retval)
++ return retval;
++ return 0;
++}
++
++/*
++ * rs_break() --- routine which turns the break handling on or off
++ */
++#if (LINUX_VERSION_CODE < 131394) /* Linux 2.1.66 */
++static void send_break( struct async_struct * info, int duration)
++{
++ if (!CONFIGURED_SERIAL_PORT(info))
++ return;
++ current->state = TASK_INTERRUPTIBLE;
++ current->timeout = jiffies + duration;
++ cli();
++ info->LCR |= UART_LCR_SBC;
++ serial_out(info, UART_LCR, info->LCR);
++ schedule();
++ info->LCR &= ~UART_LCR_SBC;
++ serial_out(info, UART_LCR, info->LCR);
++ sti();
++}
++#else
++static void rs_break(struct tty_struct *tty, int break_state)
++{
++ struct async_struct * info = (struct async_struct *)tty->driver_data;
++ unsigned long flags;
++
++ if (serial_paranoia_check(info, tty->device, "rs_break"))
++ return;
++
++ if (!CONFIGURED_SERIAL_PORT(info))
++ return;
++ save_flags(flags); cli();
++ if (break_state == -1)
++ info->LCR |= UART_LCR_SBC;
++ else
++ info->LCR &= ~UART_LCR_SBC;
++ serial_out(info, UART_LCR, info->LCR);
++ restore_flags(flags);
++}
++#endif
++
++#ifdef CONFIG_SERIAL_MULTIPORT
++static int get_multiport_struct(struct async_struct * info,
++ struct serial_multiport_struct *retinfo)
++{
++ struct serial_multiport_struct ret;
++ struct rs_multiport_struct *multi;
++
++ multi = &rs_multiport[info->state->irq];
++
++ ret.port_monitor = multi->port_monitor;
++
++ ret.port1 = multi->port1;
++ ret.mask1 = multi->mask1;
++ ret.match1 = multi->match1;
++
++ ret.port2 = multi->port2;
++ ret.mask2 = multi->mask2;
++ ret.match2 = multi->match2;
++
++ ret.port3 = multi->port3;
++ ret.mask3 = multi->mask3;
++ ret.match3 = multi->match3;
++
++ ret.port4 = multi->port4;
++ ret.mask4 = multi->mask4;
++ ret.match4 = multi->match4;
++
++ ret.irq = info->state->irq;
++
++ if (copy_to_user(retinfo,&ret,sizeof(*retinfo)))
++ return -EFAULT;
++ return 0;
++}
++
++static int set_multiport_struct(struct async_struct * info,
++ struct serial_multiport_struct *in_multi)
++{
++ struct serial_multiport_struct new_multi;
++ struct rs_multiport_struct *multi;
++ struct serial_state *state;
++ int was_multi, now_multi;
++ int retval;
++ void (*handler)(int, void *, struct pt_regs *);
++
++ if (!capable(CAP_SYS_ADMIN))
++ return -EPERM;
++ state = info->state;
++
++ if (copy_from_user(&new_multi, in_multi,
++ sizeof(struct serial_multiport_struct)))
++ return -EFAULT;
++
++ if (new_multi.irq != state->irq || state->irq == 0 ||
++ !IRQ_ports[state->irq])
++ return -EINVAL;
++
++ multi = &rs_multiport[state->irq];
++ was_multi = (multi->port1 != 0);
++
++ multi->port_monitor = new_multi.port_monitor;
++
++ if (multi->port1)
++ release_region(multi->port1,1);
++ multi->port1 = new_multi.port1;
++ multi->mask1 = new_multi.mask1;
++ multi->match1 = new_multi.match1;
++ if (multi->port1)
++ request_region(multi->port1,1,"serial(multiport1)");
++
++ if (multi->port2)
++ release_region(multi->port2,1);
++ multi->port2 = new_multi.port2;
++ multi->mask2 = new_multi.mask2;
++ multi->match2 = new_multi.match2;
++ if (multi->port2)
++ request_region(multi->port2,1,"serial(multiport2)");
++
++ if (multi->port3)
++ release_region(multi->port3,1);
++ multi->port3 = new_multi.port3;
++ multi->mask3 = new_multi.mask3;
++ multi->match3 = new_multi.match3;
++ if (multi->port3)
++ request_region(multi->port3,1,"serial(multiport3)");
++
++ if (multi->port4)
++ release_region(multi->port4,1);
++ multi->port4 = new_multi.port4;
++ multi->mask4 = new_multi.mask4;
++ multi->match4 = new_multi.match4;
++ if (multi->port4)
++ request_region(multi->port4,1,"serial(multiport4)");
++
++ now_multi = (multi->port1 != 0);
++
++ if (IRQ_ports[state->irq]->next_port &&
++ (was_multi != now_multi)) {
++ free_irq(state->irq, &IRQ_ports[state->irq]);
++ if (now_multi)
++ handler = rs_interrupt_multi;
++ else
++ handler = rs_interrupt;
++
++ retval = request_irq(state->irq, handler, SA_SHIRQ,
++ "serial", &IRQ_ports[state->irq]);
++ if (retval) {
++ printk("Couldn't reallocate serial interrupt "
++ "driver!!\n");
++ }
++ }
++ return 0;
++}
++#endif
++
++static int rs_ioctl(struct tty_struct *tty, struct file * file,
++ unsigned int cmd, unsigned long arg)
++{
++ struct async_struct * info = (struct async_struct *)tty->driver_data;
++ struct async_icount cprev, cnow; /* kernel counter temps */
++ struct serial_icounter_struct icount;
++ unsigned long flags;
++#if (LINUX_VERSION_CODE < 131394) /* Linux 2.1.66 */
++ int retval, tmp;
++#endif
++
++ if (serial_paranoia_check(info, tty->device, "rs_ioctl"))
++ return -ENODEV;
++
++ if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
++ (cmd != TIOCSERCONFIG) && (cmd != TIOCSERGSTRUCT) &&
++ (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) {
++ if (tty->flags & (1 << TTY_IO_ERROR))
++ return -EIO;
++ }
++
++ switch (cmd) {
++#if (LINUX_VERSION_CODE < 131394) /* Linux 2.1.66 */
++ case TCSBRK: /* SVID version: non-zero arg --> no break */
++ retval = tty_check_change(tty);
++ if (retval)
++ return retval;
++ tty_wait_until_sent(tty, 0);
++ if (signal_pending(current))
++ return -EINTR;
++ if (!arg) {
++ send_break(info, HZ/4); /* 1/4 second */
++ if (signal_pending(current))
++ return -EINTR;
++ }
++ return 0;
++ case TCSBRKP: /* support for POSIX tcsendbreak() */
++ retval = tty_check_change(tty);
++ if (retval)
++ return retval;
++ tty_wait_until_sent(tty, 0);
++ if (signal_pending(current))
++ return -EINTR;
++ send_break(info, arg ? arg*(HZ/10) : HZ/4);
++ if (signal_pending(current))
++ return -EINTR;
++ return 0;
++ case TIOCGSOFTCAR:
++ tmp = C_CLOCAL(tty) ? 1 : 0;
++ if (copy_to_user((void *)arg, &tmp, sizeof(int)))
++ return -EFAULT;
++ return 0;
++ case TIOCSSOFTCAR:
++ if (copy_from_user(&tmp, (void *)arg, sizeof(int)))
++ return -EFAULT;
++
++ tty->termios->c_cflag =
++ ((tty->termios->c_cflag & ~CLOCAL) |
++ (tmp ? CLOCAL : 0));
++ return 0;
++#endif
++ case TIOCMGET:
++ return get_modem_info(info, (unsigned int *) arg);
++ case TIOCMBIS:
++ case TIOCMBIC:
++ case TIOCMSET:
++ return set_modem_info(info, cmd, (unsigned int *) arg);
++ case TIOCGSERIAL:
++ return get_serial_info(info,
++ (struct serial_struct *) arg);
++ case TIOCSSERIAL:
++ return set_serial_info(info,
++ (struct serial_struct *) arg);
++ case TIOCSERCONFIG:
++ return do_autoconfig(info);
++
++ case TIOCSERGETLSR: /* Get line status register */
++ return get_lsr_info(info, (unsigned int *) arg);
++
++ case TIOCSERGSTRUCT:
++ if (copy_to_user((struct async_struct *) arg,
++ info, sizeof(struct async_struct)))
++ return -EFAULT;
++ return 0;
++
++#ifdef CONFIG_SERIAL_MULTIPORT
++ case TIOCSERGETMULTI:
++ return get_multiport_struct(info,
++ (struct serial_multiport_struct *) arg);
++ case TIOCSERSETMULTI:
++ return set_multiport_struct(info,
++ (struct serial_multiport_struct *) arg);
++#endif
++
++ /*
++ * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change
++ * - mask passed in arg for lines of interest
++ * (use |'ed TIOCM_RNG/DSR/CD/CTS for masking)
++ * Caller should use TIOCGICOUNT to see which one it was
++ */
++ case TIOCMIWAIT:
++ save_flags(flags); cli();
++ /* note the counters on entry */
++ cprev = info->state->icount;
++ restore_flags(flags);
++ /* Force modem status interrupts on */
++ info->IER |= UART_IER_MSI;
++ serial_out(info, UART_IER, info->IER);
++ while (1) {
++ interruptible_sleep_on(&info->delta_msr_wait);
++ /* see if a signal did it */
++ if (signal_pending(current))
++ return -ERESTARTSYS;
++ save_flags(flags); cli();
++ cnow = info->state->icount; /* atomic copy */
++ restore_flags(flags);
++ if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
++ cnow.dcd == cprev.dcd && cnow.cts == cprev.cts)
++ return -EIO; /* no change => error */
++ if ( ((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
++ ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
++ ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) ||
++ ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts)) ) {
++ return 0;
++ }
++ cprev = cnow;
++ }
++ /* NOTREACHED */
++
++ /*
++ * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
++ * Return: write counters to the user passed counter struct
++ * NB: both 1->0 and 0->1 transitions are counted except for
++ * RI where only 0->1 is counted.
++ */
++ case TIOCGICOUNT:
++ save_flags(flags); cli();
++ cnow = info->state->icount;
++ restore_flags(flags);
++ icount.cts = cnow.cts;
++ icount.dsr = cnow.dsr;
++ icount.rng = cnow.rng;
++ icount.dcd = cnow.dcd;
++ icount.rx = cnow.rx;
++ icount.tx = cnow.tx;
++ icount.frame = cnow.frame;
++ icount.overrun = cnow.overrun;
++ icount.parity = cnow.parity;
++ icount.brk = cnow.brk;
++ icount.buf_overrun = cnow.buf_overrun;
++
++ if (copy_to_user((void *)arg, &icount, sizeof(icount)))
++ return -EFAULT;
++ return 0;
++ case TIOCSERGWILD:
++ case TIOCSERSWILD:
++ /* "setserial -W" is called in Debian boot */
++ printk ("TIOCSER?WILD ioctl obsolete, ignored.\n");
++ return 0;
++
++ default:
++ return -ENOIOCTLCMD;
++ }
++ return 0;
++}
++
++static void rs_set_termios(struct tty_struct *tty, struct termios *old_termios)
++{
++ struct async_struct *info = (struct async_struct *)tty->driver_data;
++ unsigned long flags;
++ unsigned int cflag = tty->termios->c_cflag;
++
++ if ( (cflag == old_termios->c_cflag)
++ && ( RELEVANT_IFLAG(tty->termios->c_iflag)
++ == RELEVANT_IFLAG(old_termios->c_iflag)))
++ return;
++
++ change_speed(info, old_termios);
++
++ /* Handle transition to B0 status */
++ if ((old_termios->c_cflag & CBAUD) &&
++ !(cflag & CBAUD)) {
++ info->MCR &= ~(UART_MCR_DTR|UART_MCR_RTS);
++ save_flags(flags); cli();
++ serial_out(info, UART_MCR, info->MCR);
++ restore_flags(flags);
++ }
++
++ /* Handle transition away from B0 status */
++ if (!(old_termios->c_cflag & CBAUD) &&
++ (cflag & CBAUD)) {
++ info->MCR |= UART_MCR_DTR;
++ if (!(tty->termios->c_cflag & CRTSCTS) ||
++ !test_bit(TTY_THROTTLED, &tty->flags)) {
++ info->MCR |= UART_MCR_RTS;
++ }
++ save_flags(flags); cli();
++ serial_out(info, UART_MCR, info->MCR);
++ restore_flags(flags);
++ }
++
++ /* Handle turning off CRTSCTS */
++ if ((old_termios->c_cflag & CRTSCTS) &&
++ !(tty->termios->c_cflag & CRTSCTS)) {
++ tty->hw_stopped = 0;
++ rs_start(tty);
++ }
++
++#if 0
++ /*
++ * No need to wake up processes in open wait, since they
++ * sample the CLOCAL flag once, and don't recheck it.
++ * XXX It's not clear whether the current behavior is correct
++ * or not. Hence, this may change.....
++ */
++ if (!(old_termios->c_cflag & CLOCAL) &&
++ (tty->termios->c_cflag & CLOCAL))
++ wake_up_interruptible(&info->open_wait);
++#endif
++}
++
++/*
++ * ------------------------------------------------------------
++ * rs_close()
++ *
++ * This routine is called when the serial port gets closed. First, we
++ * wait for the last remaining data to be sent. Then, we unlink its
++ * async structure from the interrupt chain if necessary, and we free
++ * that IRQ if nothing is left in the chain.
++ * ------------------------------------------------------------
++ */
++static void rs_close(struct tty_struct *tty, struct file * filp)
++{
++ struct async_struct * info = (struct async_struct *)tty->driver_data;
++ struct serial_state *state;
++ unsigned long flags;
++
++ if (!info || serial_paranoia_check(info, tty->device, "rs_close"))
++ return;
++
++ state = info->state;
++
++ save_flags(flags); cli();
++
++ if (tty_hung_up_p(filp)) {
++ DBG_CNT("before DEC-hung");
++ MOD_DEC_USE_COUNT;
++ restore_flags(flags);
++ return;
++ }
++
++#ifdef SERIAL_DEBUG_OPEN
++ printk("rs_close ttys%d, count = %d\n", info->line, state->count);
++#endif
++ if ((tty->count == 1) && (state->count != 1)) {
++ /*
++ * Uh, oh. tty->count is 1, which means that the tty
++ * structure will be freed. state->count should always
++ * be one in these conditions. If it's greater than
++ * one, we've got real problems, since it means the
++ * serial port won't be shutdown.
++ */
++ printk("rs_close: bad serial port count; tty->count is 1, "
++ "state->count is %d\n", state->count);
++ state->count = 1;
++ }
++ if (--state->count < 0) {
++ printk("rs_close: bad serial port count for ttys%d: %d\n",
++ info->line, state->count);
++ state->count = 0;
++ }
++ if (state->count) {
++ DBG_CNT("before DEC-2");
++ MOD_DEC_USE_COUNT;
++ restore_flags(flags);
++ return;
++ }
++ info->flags |= ASYNC_CLOSING;
++ restore_flags(flags);
++ /*
++ * Save the termios structure, since this port may have
++ * separate termios for callout and dialin.
++ */
++ if (info->flags & ASYNC_NORMAL_ACTIVE)
++ info->state->normal_termios = *tty->termios;
++ if (info->flags & ASYNC_CALLOUT_ACTIVE)
++ info->state->callout_termios = *tty->termios;
++ /*
++ * Now we wait for the transmit buffer to clear; and we notify
++ * the line discipline to only process XON/XOFF characters.
++ */
++ tty->closing = 1;
++ if (state->closing_wait != ASYNC_CLOSING_WAIT_NONE)
++ tty_wait_until_sent(tty, state->closing_wait);
++ /*
++ * At this point we stop accepting input. To do this, we
++ * disable the receive line status interrupts, and tell the
++ * interrupt driver to stop checking the data ready bit in the
++ * line status register.
++ */
++ info->IER &= ~UART_IER_RLSI;
++ info->read_status_mask &= ~UART_LSR_DR;
++ if (info->flags & ASYNC_INITIALIZED) {
++ serial_out(info, UART_IER, info->IER);
++ /*
++ * Before we drop DTR, make sure the UART transmitter
++ * has completely drained; this is especially
++ * important if there is a transmit FIFO!
++ */
++ rs_wait_until_sent(tty, info->timeout);
++ }
++ shutdown(info);
++ if (tty->driver.flush_buffer)
++ tty->driver.flush_buffer(tty);
++ tty_ldisc_flush(tty);
++ tty->closing = 0;
++ info->event = 0;
++ info->tty = 0;
++ if (info->blocked_open) {
++ if (state->close_delay) {
++ set_current_state(TASK_INTERRUPTIBLE);
++ schedule_timeout(state->close_delay);
++ }
++ wake_up_interruptible(&info->open_wait);
++ }
++ info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CALLOUT_ACTIVE|
++ ASYNC_CLOSING);
++ wake_up_interruptible(&info->close_wait);
++ MOD_DEC_USE_COUNT;
++}
++
++/*
++ * rs_wait_until_sent() --- wait until the transmitter is empty
++ */
++static void rs_wait_until_sent(struct tty_struct *tty, int timeout)
++{
++ struct async_struct * info = (struct async_struct *)tty->driver_data;
++ unsigned long orig_jiffies, char_time;
++ int lsr;
++
++ if (serial_paranoia_check(info, tty->device, "rs_wait_until_sent"))
++ return;
++
++ if (info->state->type == PORT_UNKNOWN)
++ return;
++
++ if (info->xmit_fifo_size == 0)
++ return; /* Just in case.... */
++
++ orig_jiffies = jiffies;
++ /*
++ * Set the check interval to be 1/5 of the estimated time to
++ * send a single character, and make it at least 1. The check
++ * interval should also be less than the timeout.
++ *
++ * Note: we have to use pretty tight timings here to satisfy
++ * the NIST-PCTS.
++ */
++ char_time = (info->timeout - HZ/50) / info->xmit_fifo_size;
++ char_time = char_time / 5;
++ if (char_time == 0)
++ char_time = 1;
++ if (timeout && timeout < char_time)
++ char_time = timeout;
++ /*
++ * If the transmitter hasn't cleared in twice the approximate
++ * amount of time to send the entire FIFO, it probably won't
++ * ever clear. This assumes the UART isn't doing flow
++ * control, which is currently the case. Hence, if it ever
++ * takes longer than info->timeout, this is probably due to a
++ * UART bug of some kind. So, we clamp the timeout parameter at
++ * 2*info->timeout.
++ */
++ if (!timeout || timeout > 2*info->timeout)
++ timeout = 2*info->timeout;
++#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
++ printk("In rs_wait_until_sent(%d) check=%lu...", timeout, char_time);
++ printk("jiff=%lu...", jiffies);
++#endif
++ while (!((lsr = serial_inp(info, UART_LSR)) & UART_LSR_TEMT)) {
++#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
++ printk("lsr = %d (jiff=%lu)...", lsr, jiffies);
++#endif
++ set_current_state(TASK_INTERRUPTIBLE);
++ schedule_timeout(char_time);
++ if (signal_pending(current))
++ break;
++ if (timeout && time_after(jiffies, orig_jiffies + timeout))
++ break;
++ }
++#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
++ printk("lsr = %d (jiff=%lu)...done\n", lsr, jiffies);
++#endif
++}
++
++/*
++ * rs_hangup() --- called by tty_hangup() when a hangup is signaled.
++ */
++static void rs_hangup(struct tty_struct *tty)
++{
++ struct async_struct * info = (struct async_struct *)tty->driver_data;
++ struct serial_state *state = info->state;
++
++ if (serial_paranoia_check(info, tty->device, "rs_hangup"))
++ return;
++
++ state = info->state;
++
++ rs_flush_buffer(tty);
++ if (info->flags & ASYNC_CLOSING)
++ return;
++ shutdown(info);
++ info->event = 0;
++ state->count = 0;
++ info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CALLOUT_ACTIVE);
++ info->tty = 0;
++ wake_up_interruptible(&info->open_wait);
++}
++
++/*
++ * ------------------------------------------------------------
++ * rs_open() and friends
++ * ------------------------------------------------------------
++ */
++static int block_til_ready(struct tty_struct *tty, struct file * filp,
++ struct async_struct *info)
++{
++ DECLARE_WAITQUEUE(wait, current);
++ struct serial_state *state = info->state;
++ int retval;
++ int do_clocal = 0, extra_count = 0;
++ unsigned long flags;
++
++ /*
++ * If the device is in the middle of being closed, then block
++ * until it's done, and then try again.
++ */
++ if (tty_hung_up_p(filp) ||
++ (info->flags & ASYNC_CLOSING)) {
++ if (info->flags & ASYNC_CLOSING)
++ interruptible_sleep_on(&info->close_wait);
++#ifdef SERIAL_DO_RESTART
++ return ((info->flags & ASYNC_HUP_NOTIFY) ?
++ -EAGAIN : -ERESTARTSYS);
++#else
++ return -EAGAIN;
++#endif
++ }
++
++ /*
++ * If this is a callout device, then just make sure the normal
++ * device isn't being used.
++ */
++ if (tty->driver.subtype == SERIAL_TYPE_CALLOUT) {
++ if (info->flags & ASYNC_NORMAL_ACTIVE)
++ return -EBUSY;
++ if ((info->flags & ASYNC_CALLOUT_ACTIVE) &&
++ (info->flags & ASYNC_SESSION_LOCKOUT) &&
++ (info->session != current->session))
++ return -EBUSY;
++ if ((info->flags & ASYNC_CALLOUT_ACTIVE) &&
++ (info->flags & ASYNC_PGRP_LOCKOUT) &&
++ (info->pgrp != current->pgrp))
++ return -EBUSY;
++ info->flags |= ASYNC_CALLOUT_ACTIVE;
++ return 0;
++ }
++
++ /*
++ * If non-blocking mode is set, or the port is not enabled,
++ * then make the check up front and then exit.
++ */
++ if ((filp->f_flags & O_NONBLOCK) ||
++ (tty->flags & (1 << TTY_IO_ERROR))) {
++ if (info->flags & ASYNC_CALLOUT_ACTIVE)
++ return -EBUSY;
++ info->flags |= ASYNC_NORMAL_ACTIVE;
++ return 0;
++ }
++
++ if (info->flags & ASYNC_CALLOUT_ACTIVE) {
++ if (state->normal_termios.c_cflag & CLOCAL)
++ do_clocal = 1;
++ } else {
++ if (tty->termios->c_cflag & CLOCAL)
++ do_clocal = 1;
++ }
++
++ /*
++ * Block waiting for the carrier detect and the line to become
++ * free (i.e., not in use by the callout). While we are in
++ * this loop, state->count is dropped by one, so that
++ * rs_close() knows when to free things. We restore it upon
++ * exit, either normal or abnormal.
++ */
++ retval = 0;
++ add_wait_queue(&info->open_wait, &wait);
++#ifdef SERIAL_DEBUG_OPEN
++ printk("block_til_ready before block: ttys%d, count = %d\n",
++ state->line, state->count);
++#endif
++ save_flags(flags); cli();
++ if (!tty_hung_up_p(filp)) {
++ extra_count = 1;
++ state->count--;
++ }
++ restore_flags(flags);
++ info->blocked_open++;
++ while (1) {
++ save_flags(flags); cli();
++ if (!(info->flags & ASYNC_CALLOUT_ACTIVE) &&
++ (tty->termios->c_cflag & CBAUD))
++ serial_out(info, UART_MCR,
++ serial_inp(info, UART_MCR) |
++ (UART_MCR_DTR | UART_MCR_RTS));
++ restore_flags(flags);
++ set_current_state(TASK_INTERRUPTIBLE);
++ if (tty_hung_up_p(filp) ||
++ !(info->flags & ASYNC_INITIALIZED)) {
++#ifdef SERIAL_DO_RESTART
++ if (info->flags & ASYNC_HUP_NOTIFY)
++ retval = -EAGAIN;
++ else
++ retval = -ERESTARTSYS;
++#else
++ retval = -EAGAIN;
++#endif
++ break;
++ }
++ if (!(info->flags & ASYNC_CALLOUT_ACTIVE) &&
++ !(info->flags & ASYNC_CLOSING) &&
++ (do_clocal || (serial_in(info, UART_MSR) &
++ UART_MSR_DCD)))
++ break;
++ if (signal_pending(current)) {
++ retval = -ERESTARTSYS;
++ break;
++ }
++#ifdef SERIAL_DEBUG_OPEN
++ printk("block_til_ready blocking: ttys%d, count = %d\n",
++ info->line, state->count);
++#endif
++ schedule();
++ }
++ set_current_state(TASK_RUNNING);
++ remove_wait_queue(&info->open_wait, &wait);
++ if (extra_count)
++ state->count++;
++ info->blocked_open--;
++#ifdef SERIAL_DEBUG_OPEN
++ printk("block_til_ready after blocking: ttys%d, count = %d\n",
++ info->line, state->count);
++#endif
++ if (retval)
++ return retval;
++ info->flags |= ASYNC_NORMAL_ACTIVE;
++ return 0;
++}
++
++static int get_async_struct(int line, struct async_struct **ret_info)
++{
++ struct async_struct *info;
++ struct serial_state *sstate;
++
++ sstate = rs_table + line;
++ sstate->count++;
++ if (sstate->info) {
++ *ret_info = sstate->info;
++ return 0;
++ }
++ info = kmalloc(sizeof(struct async_struct), GFP_KERNEL);
++ if (!info) {
++ sstate->count--;
++ return -ENOMEM;
++ }
++ memset(info, 0, sizeof(struct async_struct));
++ init_waitqueue_head(&info->open_wait);
++ init_waitqueue_head(&info->close_wait);
++ init_waitqueue_head(&info->delta_msr_wait);
++ info->magic = SERIAL_MAGIC;
++ info->port = sstate->port;
++ info->flags = sstate->flags;
++ info->io_type = sstate->io_type;
++ info->iomem_base = sstate->iomem_base;
++ info->iomem_reg_shift = sstate->iomem_reg_shift;
++ info->xmit_fifo_size = sstate->xmit_fifo_size;
++ info->line = line;
++ info->tqueue.routine = do_softint;
++ info->tqueue.data = info;
++ info->state = sstate;
++ if (sstate->info) {
++ kfree(info);
++ *ret_info = sstate->info;
++ return 0;
++ }
++ *ret_info = sstate->info = info;
++ return 0;
++}
++
++/*
++ * This routine is called whenever a serial port is opened. It
++ * enables interrupts for a serial port, linking in its async structure into
++ * the IRQ chain. It also performs the serial-specific
++ * initialization for the tty structure.
++ *
++ * Note that on failure, we don't decrement the module use count - the tty
++ * later will call rs_close, which will decrement it for us as long as
++ * tty->driver_data is set non-NULL. --rmk
++ */
++static int rs_open(struct tty_struct *tty, struct file * filp)
++{
++ struct async_struct *info;
++ int retval, line;
++ unsigned long page;
++
++ MOD_INC_USE_COUNT;
++ line = MINOR(tty->device) - tty->driver.minor_start;
++ if ((line < 0) || (line >= NR_PORTS)) {
++ MOD_DEC_USE_COUNT;
++ return -ENODEV;
++ }
++ retval = get_async_struct(line, &info);
++ if (retval) {
++ MOD_DEC_USE_COUNT;
++ return retval;
++ }
++ tty->driver_data = info;
++ info->tty = tty;
++ if (serial_paranoia_check(info, tty->device, "rs_open"))
++ return -ENODEV;
++
++#ifdef SERIAL_DEBUG_OPEN
++ printk("rs_open %s%d, count = %d\n", tty->driver.name, info->line,
++ info->state->count);
++#endif
++#if (LINUX_VERSION_CODE > 0x20100)
++ info->tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
++#endif
++
++ /*
++ * This relies on lock_kernel() stuff so wants tidying for 2.5
++ */
++ if (!tmp_buf) {
++ page = get_zeroed_page(GFP_KERNEL);
++ if (!page)
++ return -ENOMEM;
++ if (tmp_buf)
++ free_page(page);
++ else
++ tmp_buf = (unsigned char *) page;
++ }
++
++ /*
++ * If the port is the middle of closing, bail out now
++ */
++ if (tty_hung_up_p(filp) ||
++ (info->flags & ASYNC_CLOSING)) {
++ if (info->flags & ASYNC_CLOSING)
++ interruptible_sleep_on(&info->close_wait);
++#ifdef SERIAL_DO_RESTART
++ return ((info->flags & ASYNC_HUP_NOTIFY) ?
++ -EAGAIN : -ERESTARTSYS);
++#else
++ return -EAGAIN;
++#endif
++ }
++
++ /*
++ * Start up serial port
++ */
++ retval = startup(info);
++ if (retval)
++ return retval;
++
++ retval = block_til_ready(tty, filp, info);
++ if (retval) {
++#ifdef SERIAL_DEBUG_OPEN
++ printk("rs_open returning after block_til_ready with %d\n",
++ retval);
++#endif
++ return retval;
++ }
++
++ if ((info->state->count == 1) &&
++ (info->flags & ASYNC_SPLIT_TERMIOS)) {
++ if (tty->driver.subtype == SERIAL_TYPE_NORMAL)
++ *tty->termios = info->state->normal_termios;
++ else
++ *tty->termios = info->state->callout_termios;
++ change_speed(info, 0);
++ }
++#ifdef CONFIG_SERIAL_CONSOLE
++ if (sercons.cflag && sercons.index == line) {
++ tty->termios->c_cflag = sercons.cflag;
++ sercons.cflag = 0;
++ change_speed(info, 0);
++ }
++#endif
++ info->session = current->session;
++ info->pgrp = current->pgrp;
++
++#ifdef SERIAL_DEBUG_OPEN
++ printk("rs_open ttys%d successful...", info->line);
++#endif
++ return 0;
++}
++
++/*
++ * /proc fs routines....
++ */
++
++static inline int line_info(char *buf, struct serial_state *state)
++{
++ struct async_struct *info = state->info, scr_info;
++ char stat_buf[30], control, status;
++ int ret;
++ unsigned long flags;
++
++ /*
++ * Return zero characters for ports not claimed by driver.
++ */
++ if (state->type == PORT_UNKNOWN) {
++ return 0; /* ignore unused ports */
++ }
++
++ ret = sprintf(buf, "%d: uart:%s port:%lX irq:%d",
++ state->line, uart_config[state->type].name,
++ (state->port ? state->port : (long)state->iomem_base),
++ state->irq);
++
++ /*
++ * Figure out the current RS-232 lines
++ */
++ if (!info) {
++ info = &scr_info; /* This is just for serial_{in,out} */
++
++ info->magic = SERIAL_MAGIC;
++ info->port = state->port;
++ info->flags = state->flags;
++ info->hub6 = state->hub6;
++ info->io_type = state->io_type;
++ info->iomem_base = state->iomem_base;
++ info->iomem_reg_shift = state->iomem_reg_shift;
++ info->quot = 0;
++ info->tty = 0;
++ }
++ save_flags(flags); cli();
++ status = serial_in(info, UART_MSR);
++ control = info != &scr_info ? info->MCR : serial_in(info, UART_MCR);
++ restore_flags(flags);
++
++ stat_buf[0] = 0;
++ stat_buf[1] = 0;
++ if (control & UART_MCR_RTS)
++ strcat(stat_buf, "|RTS");
++ if (status & UART_MSR_CTS)
++ strcat(stat_buf, "|CTS");
++ if (control & UART_MCR_DTR)
++ strcat(stat_buf, "|DTR");
++ if (status & UART_MSR_DSR)
++ strcat(stat_buf, "|DSR");
++ if (status & UART_MSR_DCD)
++ strcat(stat_buf, "|CD");
++ if (status & UART_MSR_RI)
++ strcat(stat_buf, "|RI");
++
++ if (info->quot) {
++ ret += sprintf(buf+ret, " baud:%d",
++ state->baud_base / info->quot);
++ }
++
++ ret += sprintf(buf+ret, " tx:%d rx:%d",
++ state->icount.tx, state->icount.rx);
++
++ if (state->icount.frame)
++ ret += sprintf(buf+ret, " fe:%d", state->icount.frame);
++
++ if (state->icount.parity)
++ ret += sprintf(buf+ret, " pe:%d", state->icount.parity);
++
++ if (state->icount.brk)
++ ret += sprintf(buf+ret, " brk:%d", state->icount.brk);
++
++ if (state->icount.overrun)
++ ret += sprintf(buf+ret, " oe:%d", state->icount.overrun);
++
++ /*
++ * Last thing is the RS-232 status lines
++ */
++ ret += sprintf(buf+ret, " %s\n", stat_buf+1);
++ return ret;
++}
++
++static int rs_read_proc(char *page, char **start, off_t off, int count,
++ int *eof, void *data)
++{
++ int i, len = 0, l;
++ off_t begin = 0;
++
++ len += sprintf(page, "serinfo:1.0 driver:%s%s revision:%s\n",
++ serial_version, LOCAL_VERSTRING, serial_revdate);
++ for (i = 0; i < NR_PORTS && len < 4000; i++) {
++ l = line_info(page + len, &rs_table[i]);
++ len += l;
++ if (len+begin > off+count)
++ goto done;
++ if (len+begin < off) {
++ begin += len;
++ len = 0;
++ }
++ }
++ *eof = 1;
++done:
++ if (off >= len+begin)
++ return 0;
++ *start = page + (off-begin);
++ return ((count < begin+len-off) ? count : begin+len-off);
++}
++
++/*
++ * ---------------------------------------------------------------------
++ * rs_init() and friends
++ *
++ * rs_init() is called at boot-time to initialize the serial driver.
++ * ---------------------------------------------------------------------
++ */
++
++/*
++ * This routine prints out the appropriate serial driver version
++ * number, and identifies which options were configured into this
++ * driver.
++ */
++static char serial_options[] __initdata =
++#ifdef CONFIG_HUB6
++ " HUB-6"
++#define SERIAL_OPT
++#endif
++#ifdef CONFIG_SERIAL_MANY_PORTS
++ " MANY_PORTS"
++#define SERIAL_OPT
++#endif
++#ifdef CONFIG_SERIAL_MULTIPORT
++ " MULTIPORT"
++#define SERIAL_OPT
++#endif
++#ifdef CONFIG_SERIAL_SHARE_IRQ
++ " SHARE_IRQ"
++#define SERIAL_OPT
++#endif
++#ifdef CONFIG_SERIAL_DETECT_IRQ
++ " DETECT_IRQ"
++#define SERIAL_OPT
++#endif
++#ifdef ENABLE_SERIAL_PCI
++ " SERIAL_PCI"
++#define SERIAL_OPT
++#endif
++#ifdef ENABLE_SERIAL_PNP
++ " ISAPNP"
++#define SERIAL_OPT
++#endif
++#ifdef ENABLE_SERIAL_ACPI
++ " SERIAL_ACPI"
++#define SERIAL_OPT
++#endif
++#ifdef SERIAL_OPT
++ " enabled\n";
++#else
++ " no serial options enabled\n";
++#endif
++#undef SERIAL_OPT
++
++static _INLINE_ void show_serial_version(void)
++{
++ printk(KERN_INFO "%s version %s%s (%s) with%s", serial_name,
++ serial_version, LOCAL_VERSTRING, serial_revdate,
++ serial_options);
++}
++
++/*
++ * This routine detect the IRQ of a serial port by clearing OUT2 when
++ * no UART interrupt are requested (IER = 0) (*GPL*). This seems to work at
++ * each time, as long as no other device permanently request the IRQ.
++ * If no IRQ is detected, or multiple IRQ appear, this function returns 0.
++ * The variable "state" and the field "state->port" should not be null.
++ */
++static unsigned detect_uart_irq (struct serial_state * state)
++{
++ int irq;
++ unsigned long irqs;
++ unsigned char save_mcr, save_ier;
++ struct async_struct scr_info; /* serial_{in,out} because HUB6 */
++
++#ifdef CONFIG_SERIAL_MANY_PORTS
++ unsigned char save_ICP=0; /* no warning */
++ unsigned short ICP=0;
++
++ if (state->flags & ASYNC_FOURPORT) {
++ ICP = (state->port & 0xFE0) | 0x01F;
++ save_ICP = inb_p(ICP);
++ outb_p(0x80, ICP);
++ (void) inb_p(ICP);
++ }
++#endif
++ scr_info.magic = SERIAL_MAGIC;
++ scr_info.state = state;
++ scr_info.port = state->port;
++ scr_info.flags = state->flags;
++#ifdef CONFIG_HUB6
++ scr_info.hub6 = state->hub6;
++#endif
++ scr_info.io_type = state->io_type;
++ scr_info.iomem_base = state->iomem_base;
++ scr_info.iomem_reg_shift = state->iomem_reg_shift;
++
++ /* forget possible initially masked and pending IRQ */
++ probe_irq_off(probe_irq_on());
++ save_mcr = serial_inp(&scr_info, UART_MCR);
++ save_ier = serial_inp(&scr_info, UART_IER);
++ serial_outp(&scr_info, UART_MCR, UART_MCR_OUT1 | UART_MCR_OUT2);
++
++ irqs = probe_irq_on();
++ serial_outp(&scr_info, UART_MCR, 0);
++ udelay (10);
++ if (state->flags & ASYNC_FOURPORT) {
++ serial_outp(&scr_info, UART_MCR,
++ UART_MCR_DTR | UART_MCR_RTS);
++ } else {
++ serial_outp(&scr_info, UART_MCR,
++ UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2);
++ }
++ serial_outp(&scr_info, UART_IER, 0x0f); /* enable all intrs */
++ (void)serial_inp(&scr_info, UART_LSR);
++ (void)serial_inp(&scr_info, UART_RX);
++ (void)serial_inp(&scr_info, UART_IIR);
++ (void)serial_inp(&scr_info, UART_MSR);
++ serial_outp(&scr_info, UART_TX, 0xFF);
++ udelay (20);
++ irq = probe_irq_off(irqs);
++
++ serial_outp(&scr_info, UART_MCR, save_mcr);
++ serial_outp(&scr_info, UART_IER, save_ier);
++#ifdef CONFIG_SERIAL_MANY_PORTS
++ if (state->flags & ASYNC_FOURPORT)
++ outb_p(save_ICP, ICP);
++#endif
++ return (irq > 0)? irq : 0;
++}
++
++/*
++ * This is a quickie test to see how big the FIFO is.
++ * It doesn't work at all the time, more's the pity.
++ */
++static int size_fifo(struct async_struct *info)
++{
++ unsigned char old_fcr, old_mcr, old_dll, old_dlm;
++ int count;
++
++ old_fcr = serial_inp(info, UART_FCR);
++ old_mcr = serial_inp(info, UART_MCR);
++ serial_outp(info, UART_FCR, UART_FCR_ENABLE_FIFO |
++ UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
++ serial_outp(info, UART_MCR, UART_MCR_LOOP);
++ serial_outp(info, UART_LCR, UART_LCR_DLAB);
++ old_dll = serial_inp(info, UART_DLL);
++ old_dlm = serial_inp(info, UART_DLM);
++ serial_outp(info, UART_DLL, 0x01);
++ serial_outp(info, UART_DLM, 0x00);
++ serial_outp(info, UART_LCR, 0x03);
++ for (count = 0; count < 256; count++)
++ serial_outp(info, UART_TX, count);
++ mdelay(20);
++ for (count = 0; (serial_inp(info, UART_LSR) & UART_LSR_DR) &&
++ (count < 256); count++)
++ serial_inp(info, UART_RX);
++ serial_outp(info, UART_FCR, old_fcr);
++ serial_outp(info, UART_MCR, old_mcr);
++ serial_outp(info, UART_LCR, UART_LCR_DLAB);
++ serial_outp(info, UART_DLL, old_dll);
++ serial_outp(info, UART_DLM, old_dlm);
++
++ return count;
++}
++
++/*
++ * This is a helper routine to autodetect StarTech/Exar/Oxsemi UART's.
++ * When this function is called we know it is at least a StarTech
++ * 16650 V2, but it might be one of several StarTech UARTs, or one of
++ * its clones. (We treat the broken original StarTech 16650 V1 as a
++ * 16550, and why not? Startech doesn't seem to even acknowledge its
++ * existence.)
++ *
++ * What evil have men's minds wrought...
++ */
++static void autoconfig_startech_uarts(struct async_struct *info,
++ struct serial_state *state,
++ unsigned long flags)
++{
++ unsigned char scratch, scratch2, scratch3, scratch4;
++
++ /*
++ * First we check to see if it's an Oxford Semiconductor UART.
++ *
++ * If we have to do this here because some non-National
++ * Semiconductor clone chips lock up if you try writing to the
++ * LSR register (which serial_icr_read does)
++ */
++ if (state->type == PORT_16550A) {
++ /*
++ * EFR [4] must be set else this test fails
++ *
++ * This shouldn't be necessary, but Mike Hudson
++ * (Exoray@isys.ca) claims that it's needed for 952
++ * dual UART's (which are not recommended for new designs).
++ */
++ info->ACR = 0;
++ serial_out(info, UART_LCR, 0xBF);
++ serial_out(info, UART_EFR, 0x10);
++ serial_out(info, UART_LCR, 0x00);
++ /* Check for Oxford Semiconductor 16C950 */
++ scratch = serial_icr_read(info, UART_ID1);
++ scratch2 = serial_icr_read(info, UART_ID2);
++ scratch3 = serial_icr_read(info, UART_ID3);
++
++ if (scratch == 0x16 && scratch2 == 0xC9 &&
++ (scratch3 == 0x50 || scratch3 == 0x52 ||
++ scratch3 == 0x54)) {
++ state->type = PORT_16C950;
++ state->revision = serial_icr_read(info, UART_REV) |
++ (scratch3 << 8);
++ return;
++ }
++ }
++
++ /*
++ * We check for a XR16C850 by setting DLL and DLM to 0, and
++ * then reading back DLL and DLM. If DLM reads back 0x10,
++ * then the UART is a XR16C850 and the DLL contains the chip
++ * revision. If DLM reads back 0x14, then the UART is a
++ * XR16C854.
++ *
++ */
++
++ /* Save the DLL and DLM */
++
++ serial_outp(info, UART_LCR, UART_LCR_DLAB);
++ scratch3 = serial_inp(info, UART_DLL);
++ scratch4 = serial_inp(info, UART_DLM);
++
++ serial_outp(info, UART_DLL, 0);
++ serial_outp(info, UART_DLM, 0);
++ scratch2 = serial_inp(info, UART_DLL);
++ scratch = serial_inp(info, UART_DLM);
++ serial_outp(info, UART_LCR, 0);
++
++ if (scratch == 0x10 || scratch == 0x14) {
++ if (scratch == 0x10)
++ state->revision = scratch2;
++ state->type = PORT_16850;
++ return;
++ }
++
++ /* Restore the DLL and DLM */
++
++ serial_outp(info, UART_LCR, UART_LCR_DLAB);
++ serial_outp(info, UART_DLL, scratch3);
++ serial_outp(info, UART_DLM, scratch4);
++ serial_outp(info, UART_LCR, 0);
++ /*
++ * We distinguish between the '654 and the '650 by counting
++ * how many bytes are in the FIFO. I'm using this for now,
++ * since that's the technique that was sent to me in the
++ * serial driver update, but I'm not convinced this works.
++ * I've had problems doing this in the past. -TYT
++ */
++ if (size_fifo(info) == 64)
++ state->type = PORT_16654;
++ else
++ state->type = PORT_16650V2;
++}
++
++/*
++ * This routine is called by rs_init() to initialize a specific serial
++ * port. It determines what type of UART chip this serial port is
++ * using: 8250, 16450, 16550, 16550A. The important question is
++ * whether or not this UART is a 16550A or not, since this will
++ * determine whether or not we can use its FIFO features or not.
++ */
++static void autoconfig(struct serial_state * state)
++{
++ unsigned char status1, status2, scratch, scratch2, scratch3;
++ unsigned char save_lcr, save_mcr;
++ struct async_struct *info, scr_info;
++ unsigned long flags;
++
++ state->type = PORT_UNKNOWN;
++
++#ifdef SERIAL_DEBUG_AUTOCONF
++ printk("Testing ttyS%d (0x%04lx, 0x%04x)...\n", state->line,
++ state->port, (unsigned) state->iomem_base);
++#endif
++
++ if (!CONFIGURED_SERIAL_PORT(state))
++ return;
++
++ info = &scr_info; /* This is just for serial_{in,out} */
++
++ info->magic = SERIAL_MAGIC;
++ info->state = state;
++ info->port = state->port;
++ info->flags = state->flags;
++#ifdef CONFIG_HUB6
++ info->hub6 = state->hub6;
++#endif
++ info->io_type = state->io_type;
++ info->iomem_base = state->iomem_base;
++ info->iomem_reg_shift = state->iomem_reg_shift;
++
++ save_flags(flags); cli();
++
++ if (!(state->flags & ASYNC_BUGGY_UART) &&
++ !state->iomem_base) {
++ /*
++ * Do a simple existence test first; if we fail this,
++ * there's no point trying anything else.
++ *
++ * 0x80 is used as a nonsense port to prevent against
++ * false positives due to ISA bus float. The
++ * assumption is that 0x80 is a non-existent port;
++ * which should be safe since include/asm/io.h also
++ * makes this assumption.
++ */
++ scratch = serial_inp(info, UART_IER);
++ serial_outp(info, UART_IER, 0);
++#ifdef __i386__
++ outb(0xff, 0x080);
++#endif
++ scratch2 = serial_inp(info, UART_IER);
++ serial_outp(info, UART_IER, 0x0F);
++#ifdef __i386__
++ outb(0, 0x080);
++#endif
++ scratch3 = serial_inp(info, UART_IER);
++ serial_outp(info, UART_IER, scratch);
++ if (scratch2 || scratch3 != 0x0F) {
++#ifdef SERIAL_DEBUG_AUTOCONF
++ printk("serial: ttyS%d: simple autoconfig failed "
++ "(%02x, %02x)\n", state->line,
++ scratch2, scratch3);
++#endif
++ restore_flags(flags);
++ return; /* We failed; there's nothing here */
++ }
++ }
++
++ save_mcr = serial_in(info, UART_MCR);
++ save_lcr = serial_in(info, UART_LCR);
++
++ /*
++ * Check to see if a UART is really there. Certain broken
++ * internal modems based on the Rockwell chipset fail this
++ * test, because they apparently don't implement the loopback
++ * test mode. So this test is skipped on the COM 1 through
++ * COM 4 ports. This *should* be safe, since no board
++ * manufacturer would be stupid enough to design a board
++ * that conflicts with COM 1-4 --- we hope!
++ */
++ if (!(state->flags & ASYNC_SKIP_TEST)) {
++ serial_outp(info, UART_MCR, UART_MCR_LOOP | 0x0A);
++ status1 = serial_inp(info, UART_MSR) & 0xF0;
++ serial_outp(info, UART_MCR, save_mcr);
++ if (status1 != 0x90) {
++#ifdef SERIAL_DEBUG_AUTOCONF
++ printk("serial: ttyS%d: no UART loopback failed\n",
++ state->line);
++#endif
++ restore_flags(flags);
++ return;
++ }
++ }
++ serial_outp(info, UART_LCR, 0xBF); /* set up for StarTech test */
++ serial_outp(info, UART_EFR, 0); /* EFR is the same as FCR */
++ serial_outp(info, UART_LCR, 0);
++ serial_outp(info, UART_FCR, UART_FCR_ENABLE_FIFO);
++ scratch = serial_in(info, UART_IIR) >> 6;
++ switch (scratch) {
++ case 0:
++ state->type = PORT_16450;
++ break;
++ case 1:
++ state->type = PORT_UNKNOWN;
++ break;
++ case 2:
++ state->type = PORT_16550;
++ break;
++ case 3:
++ state->type = PORT_16550A;
++ break;
++ }
++ if (state->type == PORT_16550A) {
++ /* Check for Startech UART's */
++ serial_outp(info, UART_LCR, UART_LCR_DLAB);
++ if (serial_in(info, UART_EFR) == 0) {
++ serial_outp(info, UART_EFR, 0xA8);
++ if (serial_in(info, UART_EFR) == 0) {
++ /* We are a NS16552D/Motorola
++ * 8xxx DUART, stop. */
++ goto out;
++ }
++ state->type = PORT_16650;
++ serial_outp(info, UART_EFR, 0);
++ } else {
++ serial_outp(info, UART_LCR, 0xBF);
++ if (serial_in(info, UART_EFR) == 0)
++ autoconfig_startech_uarts(info, state, flags);
++ }
++ }
++ if (state->type == PORT_16550A) {
++ /* Check for TI 16750 */
++ serial_outp(info, UART_LCR, save_lcr | UART_LCR_DLAB);
++ serial_outp(info, UART_FCR,
++ UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE);
++ scratch = serial_in(info, UART_IIR) >> 5;
++ if (scratch == 7) {
++ /*
++ * If this is a 16750, and not a cheap UART
++ * clone, then it should only go into 64 byte
++ * mode if the UART_FCR7_64BYTE bit was set
++ * while UART_LCR_DLAB was latched.
++ */
++ serial_outp(info, UART_FCR, UART_FCR_ENABLE_FIFO);
++ serial_outp(info, UART_LCR, 0);
++ serial_outp(info, UART_FCR,
++ UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE);
++ scratch = serial_in(info, UART_IIR) >> 5;
++ if (scratch == 6)
++ state->type = PORT_16750;
++ }
++ serial_outp(info, UART_FCR, UART_FCR_ENABLE_FIFO);
++ }
++#if defined(CONFIG_SERIAL_RSA) && defined(MODULE)
++ if (state->type == PORT_16550A) {
++ int i;
++
++ for (i = 0 ; i < PORT_RSA_MAX ; ++i) {
++ if (!probe_rsa[i] && !force_rsa[i])
++ break;
++ if (((probe_rsa[i] != state->port) ||
++ check_region(state->port + UART_RSA_BASE, 16)) &&
++ (force_rsa[i] != state->port))
++ continue;
++ if (!enable_rsa(info))
++ continue;
++ state->type = PORT_RSA;
++ state->baud_base = SERIAL_RSA_BAUD_BASE;
++ break;
++ }
++ }
++#endif
++out:
++ serial_outp(info, UART_LCR, save_lcr);
++ if (state->type == PORT_16450) {
++ scratch = serial_in(info, UART_SCR);
++ serial_outp(info, UART_SCR, 0xa5);
++ status1 = serial_in(info, UART_SCR);
++ serial_outp(info, UART_SCR, 0x5a);
++ status2 = serial_in(info, UART_SCR);
++ serial_outp(info, UART_SCR, scratch);
++
++ if ((status1 != 0xa5) || (status2 != 0x5a))
++ state->type = PORT_8250;
++ }
++ state->xmit_fifo_size = uart_config[state->type].dfl_xmit_fifo_size;
++
++ if (state->type == PORT_UNKNOWN) {
++ restore_flags(flags);
++ return;
++ }
++
++ if (info->port) {
++#ifdef CONFIG_SERIAL_RSA
++ if (state->type == PORT_RSA)
++ request_region(info->port + UART_RSA_BASE, 16,
++ "serial_rsa(auto)");
++ else
++#endif
++ request_region(info->port,8,"serial(auto)");
++ }
++
++ /*
++ * Reset the UART.
++ */
++#ifdef CONFIG_SERIAL_RSA
++ if (state->type == PORT_RSA)
++ serial_outp(info, UART_RSA_FRR, 0);
++#endif
++ serial_outp(info, UART_MCR, save_mcr);
++ serial_outp(info, UART_FCR, (UART_FCR_ENABLE_FIFO |
++ UART_FCR_CLEAR_RCVR |
++ UART_FCR_CLEAR_XMIT));
++ serial_outp(info, UART_FCR, 0);
++ (void)serial_in(info, UART_RX);
++ serial_outp(info, UART_IER, 0);
++
++ restore_flags(flags);
++}
++
++int register_serial(struct serial_struct *req);
++void unregister_serial(int line);
++
++#if (LINUX_VERSION_CODE > 0x20100)
++EXPORT_SYMBOL(register_serial);
++EXPORT_SYMBOL(unregister_serial);
++#else
++static struct symbol_table serial_syms = {
++#include <linux/symtab_begin.h>
++ X(register_serial),
++ X(unregister_serial),
++#include <linux/symtab_end.h>
++};
++#endif
++
++
++#if defined(ENABLE_SERIAL_PCI) || defined(ENABLE_SERIAL_PNP)
++
++static void __devinit printk_pnp_dev_id(unsigned short vendor,
++ unsigned short device)
++{
++ printk("%c%c%c%x%x%x%x",
++ 'A' + ((vendor >> 2) & 0x3f) - 1,
++ 'A' + (((vendor & 3) << 3) | ((vendor >> 13) & 7)) - 1,
++ 'A' + ((vendor >> 8) & 0x1f) - 1,
++ (device >> 4) & 0x0f,
++ device & 0x0f,
++ (device >> 12) & 0x0f,
++ (device >> 8) & 0x0f);
++}
++
++static _INLINE_ int get_pci_port(struct pci_dev *dev,
++ struct pci_board *board,
++ struct serial_struct *req,
++ int idx)
++{
++ unsigned long port;
++ int base_idx;
++ int max_port;
++ int offset;
++
++ base_idx = SPCI_FL_GET_BASE(board->flags);
++ if (board->flags & SPCI_FL_BASE_TABLE)
++ base_idx += idx;
++
++ if (board->flags & SPCI_FL_REGION_SZ_CAP) {
++ max_port = pci_resource_len(dev, base_idx) / 8;
++ if (idx >= max_port)
++ return 1;
++ }
++
++ offset = board->first_uart_offset;
++
++ /* Timedia/SUNIX uses a mixture of BARs and offsets */
++ /* Ugh, this is ugly as all hell --- TYT */
++ if(dev->vendor == PCI_VENDOR_ID_TIMEDIA ) /* 0x1409 */
++ switch(idx) {
++ case 0: base_idx=0;
++ break;
++ case 1: base_idx=0; offset=8;
++ break;
++ case 2: base_idx=1;
++ break;
++ case 3: base_idx=1; offset=8;
++ break;
++ case 4: /* BAR 2*/
++ case 5: /* BAR 3 */
++ case 6: /* BAR 4*/
++ case 7: base_idx=idx-2; /* BAR 5*/
++ }
++
++ /* Some Titan cards are also a little weird */
++ if (dev->vendor == PCI_VENDOR_ID_TITAN &&
++ (dev->device == PCI_DEVICE_ID_TITAN_400L ||
++ dev->device == PCI_DEVICE_ID_TITAN_800L)) {
++ switch (idx) {
++ case 0: base_idx = 1;
++ break;
++ case 1: base_idx = 2;
++ break;
++ default:
++ base_idx = 4;
++ offset = 8 * (idx - 2);
++ }
++
++ }
++
++ /* HP's Diva chip puts the 4th/5th serial port further out, and
++ * some serial ports are supposed to be hidden on certain models.
++ */
++ if (dev->vendor == PCI_VENDOR_ID_HP &&
++ dev->device == PCI_DEVICE_ID_HP_SAS) {
++ switch (dev->subsystem_device) {
++ case 0x104B: /* Maestro */
++ if (idx == 3) idx++;
++ break;
++ case 0x1282: /* Everest / Longs Peak */
++ if (idx > 0) idx++;
++ if (idx > 2) idx++;
++ break;
++ }
++ if (idx > 2) {
++ offset = 0x18;
++ }
++ }
++
++ port = pci_resource_start(dev, base_idx) + offset;
++
++ if ((board->flags & SPCI_FL_BASE_TABLE) == 0)
++ port += idx * (board->uart_offset ? board->uart_offset : 8);
++
++ if (IS_PCI_REGION_IOPORT(dev, base_idx)) {
++ req->port = port;
++ if (HIGH_BITS_OFFSET)
++ req->port_high = port >> HIGH_BITS_OFFSET;
++ else
++ req->port_high = 0;
++ return 0;
++ }
++ req->io_type = SERIAL_IO_MEM;
++ req->iomem_base = ioremap(port, board->uart_offset);
++ req->iomem_reg_shift = board->reg_shift;
++ req->port = 0;
++ return 0;
++}
++
++static _INLINE_ int get_pci_irq(struct pci_dev *dev,
++ struct pci_board *board,
++ int idx)
++{
++ int base_idx;
++
++ if ((board->flags & SPCI_FL_IRQRESOURCE) == 0)
++ return dev->irq;
++
++ base_idx = SPCI_FL_GET_IRQBASE(board->flags);
++ if (board->flags & SPCI_FL_IRQ_TABLE)
++ base_idx += idx;
++
++ return PCI_IRQ_RESOURCE(dev, base_idx);
++}
++
++/*
++ * Common enabler code shared by both PCI and ISAPNP probes
++ */
++static void __devinit start_pci_pnp_board(struct pci_dev *dev,
++ struct pci_board *board)
++{
++ int k, line;
++ struct serial_struct serial_req;
++ int base_baud;
++
++ if (PREPARE_FUNC(dev) && (PREPARE_FUNC(dev))(dev) < 0) {
++ printk("serial: PNP device '");
++ printk_pnp_dev_id(dev->vendor, dev->device);
++ printk("' prepare failed\n");
++ return;
++ }
++
++ if (ACTIVATE_FUNC(dev) && (ACTIVATE_FUNC(dev))(dev) < 0) {
++ printk("serial: PNP device '");
++ printk_pnp_dev_id(dev->vendor, dev->device);
++ printk("' activate failed\n");
++ return;
++ }
++
++ /*
++ * Run the initialization function, if any
++ */
++ if (board->init_fn && ((board->init_fn)(dev, board, 1) != 0))
++ return;
++
++ /*
++ * Register the serial board in the array if we need to
++ * shutdown the board on a module unload or card removal
++ */
++ if (DEACTIVATE_FUNC(dev) || board->init_fn) {
++ for (k=0; k < NR_PCI_BOARDS; k++)
++ if (serial_pci_board[k].dev == 0)
++ break;
++ if (k >= NR_PCI_BOARDS)
++ return;
++ serial_pci_board[k].board = *board;
++ serial_pci_board[k].dev = dev;
++ }
++
++ base_baud = board->base_baud;
++ if (!base_baud)
++ base_baud = BASE_BAUD;
++ memset(&serial_req, 0, sizeof(serial_req));
++
++ for (k=0; k < board->num_ports; k++) {
++ serial_req.irq = get_pci_irq(dev, board, k);
++ if (get_pci_port(dev, board, &serial_req, k))
++ break;
++ serial_req.flags = ASYNC_SKIP_TEST | ASYNC_AUTOPROBE;
++#ifdef SERIAL_DEBUG_PCI
++ printk("Setup PCI/PNP port: port %x, irq %d, type %d\n",
++ serial_req.port, serial_req.irq, serial_req.io_type);
++#endif
++ line = register_serial(&serial_req);
++ if (line < 0)
++ break;
++ rs_table[line].baud_base = base_baud;
++ rs_table[line].dev = dev;
++ }
++}
++#endif /* ENABLE_SERIAL_PCI || ENABLE_SERIAL_PNP */
++
++#ifdef ENABLE_SERIAL_PCI
++/*
++ * Some PCI serial cards using the PLX 9050 PCI interface chip require
++ * that the card interrupt be explicitly enabled or disabled. This
++ * seems to be mainly needed on card using the PLX which also use I/O
++ * mapped memory.
++ */
++static int __devinit
++pci_plx9050_fn(struct pci_dev *dev, struct pci_board *board, int enable)
++{
++ u8 data, *p, irq_config;
++ int pci_config;
++
++ irq_config = 0x41;
++ pci_config = PCI_COMMAND_MEMORY;
++ if (dev->vendor == PCI_VENDOR_ID_PANACOM)
++ irq_config = 0x43;
++ if ((dev->vendor == PCI_VENDOR_ID_PLX) &&
++ (dev->device == PCI_DEVICE_ID_PLX_ROMULUS)) {
++ /*
++ * As the megawolf cards have the int pins active
++ * high, and have 2 UART chips, both ints must be
++ * enabled on the 9050. Also, the UARTS are set in
++ * 16450 mode by default, so we have to enable the
++ * 16C950 'enhanced' mode so that we can use the deep
++ * FIFOs
++ */
++ irq_config = 0x5b;
++ pci_config = PCI_COMMAND_MEMORY | PCI_COMMAND_IO;
++ }
++
++ pci_read_config_byte(dev, PCI_COMMAND, &data);
++
++ if (enable)
++ pci_write_config_byte(dev, PCI_COMMAND,
++ data | pci_config);
++
++ /* enable/disable interrupts */
++ p = ioremap(pci_resource_start(dev, 0), 0x80);
++ writel(enable ? irq_config : 0x00, (unsigned long)p + 0x4c);
++ iounmap(p);
++
++ if (!enable)
++ pci_write_config_byte(dev, PCI_COMMAND,
++ data & ~pci_config);
++ return 0;
++}
++
++
++/*
++ * SIIG serial cards have an PCI interface chip which also controls
++ * the UART clocking frequency. Each UART can be clocked independently
++ * (except cards equiped with 4 UARTs) and initial clocking settings
++ * are stored in the EEPROM chip. It can cause problems because this
++ * version of serial driver doesn't support differently clocked UART's
++ * on single PCI card. To prevent this, initialization functions set
++ * high frequency clocking for all UART's on given card. It is safe (I
++ * hope) because it doesn't touch EEPROM settings to prevent conflicts
++ * with other OSes (like M$ DOS).
++ *
++ * SIIG support added by Andrey Panin <pazke@mail.tp.ru>, 10/1999
++ *
++ * There is two family of SIIG serial cards with different PCI
++ * interface chip and different configuration methods:
++ * - 10x cards have control registers in IO and/or memory space;
++ * - 20x cards have control registers in standard PCI configuration space.
++ *
++ * SIIG initialization functions exported for use by parport_serial.c module.
++ */
++
++#define PCI_DEVICE_ID_SIIG_1S_10x (PCI_DEVICE_ID_SIIG_1S_10x_550 & 0xfffc)
++#define PCI_DEVICE_ID_SIIG_2S_10x (PCI_DEVICE_ID_SIIG_2S_10x_550 & 0xfff8)
++
++int __devinit
++pci_siig10x_fn(struct pci_dev *dev, struct pci_board *board, int enable)
++{
++ u16 data, *p;
++
++ if (!enable) return 0;
++
++ p = ioremap(pci_resource_start(dev, 0), 0x80);
++
++ switch (dev->device & 0xfff8) {
++ case PCI_DEVICE_ID_SIIG_1S_10x: /* 1S */
++ data = 0xffdf;
++ break;
++ case PCI_DEVICE_ID_SIIG_2S_10x: /* 2S, 2S1P */
++ data = 0xf7ff;
++ break;
++ default: /* 1S1P, 4S */
++ data = 0xfffb;
++ break;
++ }
++
++ writew(readw((unsigned long) p + 0x28) & data, (unsigned long) p + 0x28);
++ iounmap(p);
++ return 0;
++}
++EXPORT_SYMBOL(pci_siig10x_fn);
++
++#define PCI_DEVICE_ID_SIIG_2S_20x (PCI_DEVICE_ID_SIIG_2S_20x_550 & 0xfffc)
++#define PCI_DEVICE_ID_SIIG_2S1P_20x (PCI_DEVICE_ID_SIIG_2S1P_20x_550 & 0xfffc)
++
++int __devinit
++pci_siig20x_fn(struct pci_dev *dev, struct pci_board *board, int enable)
++{
++ u8 data;
++
++ if (!enable) return 0;
++
++ /* Change clock frequency for the first UART. */
++ pci_read_config_byte(dev, 0x6f, &data);
++ pci_write_config_byte(dev, 0x6f, data & 0xef);
++
++ /* If this card has 2 UART, we have to do the same with second UART. */
++ if (((dev->device & 0xfffc) == PCI_DEVICE_ID_SIIG_2S_20x) ||
++ ((dev->device & 0xfffc) == PCI_DEVICE_ID_SIIG_2S1P_20x)) {
++ pci_read_config_byte(dev, 0x73, &data);
++ pci_write_config_byte(dev, 0x73, data & 0xef);
++ }
++ return 0;
++}
++EXPORT_SYMBOL(pci_siig20x_fn);
++
++/* Added for EKF Intel i960 serial boards */
++static int __devinit
++pci_inteli960ni_fn(struct pci_dev *dev,
++ struct pci_board *board,
++ int enable)
++{
++ unsigned long oldval;
++
++ if (!(pci_get_subdevice(dev) & 0x1000))
++ return(-1);
++
++ if (!enable) /* is there something to deinit? */
++ return(0);
++
++#ifdef SERIAL_DEBUG_PCI
++ printk(KERN_DEBUG " Subsystem ID %lx (intel 960)\n",
++ (unsigned long) board->subdevice);
++#endif
++ /* is firmware started? */
++ pci_read_config_dword(dev, 0x44, (void*) &oldval);
++ if (oldval == 0x00001000L) { /* RESET value */
++ printk(KERN_DEBUG "Local i960 firmware missing");
++ return(-1);
++ }
++ return(0);
++}
++
++/*
++ * Timedia has an explosion of boards, and to avoid the PCI table from
++ * growing *huge*, we use this function to collapse some 70 entries
++ * in the PCI table into one, for sanity's and compactness's sake.
++ */
++static unsigned short timedia_single_port[] = {
++ 0x4025, 0x4027, 0x4028, 0x5025, 0x5027, 0 };
++static unsigned short timedia_dual_port[] = {
++ 0x0002, 0x4036, 0x4037, 0x4038, 0x4078, 0x4079, 0x4085,
++ 0x4088, 0x4089, 0x5037, 0x5078, 0x5079, 0x5085, 0x6079,
++ 0x7079, 0x8079, 0x8137, 0x8138, 0x8237, 0x8238, 0x9079,
++ 0x9137, 0x9138, 0x9237, 0x9238, 0xA079, 0xB079, 0xC079,
++ 0xD079, 0 };
++static unsigned short timedia_quad_port[] = {
++ 0x4055, 0x4056, 0x4095, 0x4096, 0x5056, 0x8156, 0x8157,
++ 0x8256, 0x8257, 0x9056, 0x9156, 0x9157, 0x9158, 0x9159,
++ 0x9256, 0x9257, 0xA056, 0xA157, 0xA158, 0xA159, 0xB056,
++ 0xB157, 0 };
++static unsigned short timedia_eight_port[] = {
++ 0x4065, 0x4066, 0x5065, 0x5066, 0x8166, 0x9066, 0x9166,
++ 0x9167, 0x9168, 0xA066, 0xA167, 0xA168, 0 };
++static struct timedia_struct {
++ int num;
++ unsigned short *ids;
++} timedia_data[] = {
++ { 1, timedia_single_port },
++ { 2, timedia_dual_port },
++ { 4, timedia_quad_port },
++ { 8, timedia_eight_port },
++ { 0, 0 }
++};
++
++static int __devinit
++pci_timedia_fn(struct pci_dev *dev, struct pci_board *board, int enable)
++{
++ int i, j;
++ unsigned short *ids;
++
++ if (!enable)
++ return 0;
++
++ for (i=0; timedia_data[i].num; i++) {
++ ids = timedia_data[i].ids;
++ for (j=0; ids[j]; j++) {
++ if (pci_get_subdevice(dev) == ids[j]) {
++ board->num_ports = timedia_data[i].num;
++ return 0;
++ }
++ }
++ }
++ return 0;
++}
++
++/*
++ * HP's Remote Management Console. The Diva chip came in several
++ * different versions. N-class, L2000 and A500 have two Diva chips, each
++ * with 3 UARTs (the third UART on the second chip is unused). Superdome
++ * and Keystone have one Diva chip with 3 UARTs. Some later machines have
++ * one Diva chip, but it has been expanded to 5 UARTs.
++ */
++static int __devinit
++pci_hp_diva(struct pci_dev *dev, struct pci_board *board, int enable)
++{
++ if (!enable)
++ return 0;
++
++ switch (dev->subsystem_device) {
++ case 0x1049: /* Prelude Diva 1 */
++ case 0x1223: /* Superdome */
++ case 0x1226: /* Keystone */
++ case 0x1282: /* Everest / Longs Peak */
++ board->num_ports = 3;
++ break;
++ case 0x104A: /* Prelude Diva 2 */
++ board->num_ports = 2;
++ break;
++ case 0x104B: /* Maestro */
++ board->num_ports = 4;
++ break;
++ case 0x1227: /* Powerbar */
++ board->num_ports = 1;
++ break;
++ }
++
++ return 0;
++}
++
++static int __devinit
++pci_xircom_fn(struct pci_dev *dev, struct pci_board *board, int enable)
++{
++ __set_current_state(TASK_UNINTERRUPTIBLE);
++ schedule_timeout(HZ/10);
++ return 0;
++}
++
++/*
++ * This is the configuration table for all of the PCI serial boards
++ * which we support. It is directly indexed by the pci_board_num_t enum
++ * value, which is encoded in the pci_device_id PCI probe table's
++ * driver_data member.
++ */
++enum pci_board_num_t {
++ pbn_b0_1_115200,
++ pbn_default = 0,
++
++ pbn_b0_2_115200,
++ pbn_b0_4_115200,
++
++ pbn_b0_1_921600,
++ pbn_b0_2_921600,
++ pbn_b0_4_921600,
++
++ pbn_b0_bt_1_115200,
++ pbn_b0_bt_2_115200,
++ pbn_b0_bt_1_460800,
++ pbn_b0_bt_2_460800,
++ pbn_b0_bt_2_921600,
++
++ pbn_b1_1_115200,
++ pbn_b1_2_115200,
++ pbn_b1_4_115200,
++ pbn_b1_8_115200,
++
++ pbn_b1_2_921600,
++ pbn_b1_4_921600,
++ pbn_b1_8_921600,
++
++ pbn_b1_2_1382400,
++ pbn_b1_4_1382400,
++ pbn_b1_8_1382400,
++
++ pbn_b2_1_115200,
++ pbn_b2_8_115200,
++ pbn_b2_4_460800,
++ pbn_b2_8_460800,
++ pbn_b2_16_460800,
++ pbn_b2_4_921600,
++ pbn_b2_8_921600,
++
++ pbn_b2_bt_1_115200,
++ pbn_b2_bt_2_115200,
++ pbn_b2_bt_4_115200,
++ pbn_b2_bt_2_921600,
++
++ pbn_panacom,
++ pbn_panacom2,
++ pbn_panacom4,
++ pbn_plx_romulus,
++ pbn_oxsemi,
++ pbn_timedia,
++ pbn_intel_i960,
++ pbn_sgi_ioc3,
++ pbn_hp_diva,
++#ifdef CONFIG_DDB5074
++ pbn_nec_nile4,
++#endif
++
++ pbn_dci_pccom4,
++ pbn_dci_pccom8,
++
++ pbn_xircom_combo,
++
++ pbn_siig10x_0,
++ pbn_siig10x_1,
++ pbn_siig10x_2,
++ pbn_siig10x_4,
++ pbn_siig20x_0,
++ pbn_siig20x_2,
++ pbn_siig20x_4,
++
++ pbn_computone_4,
++ pbn_computone_6,
++ pbn_computone_8,
++};
++
++static struct pci_board pci_boards[] __devinitdata = {
++ /*
++ * PCI Flags, Number of Ports, Base (Maximum) Baud Rate,
++ * Offset to get to next UART's registers,
++ * Register shift to use for memory-mapped I/O,
++ * Initialization function, first UART offset
++ */
++
++ /* Generic serial board, pbn_b0_1_115200, pbn_default */
++ { SPCI_FL_BASE0, 1, 115200 }, /* pbn_b0_1_115200,
++ pbn_default */
++
++ { SPCI_FL_BASE0, 2, 115200 }, /* pbn_b0_2_115200 */
++ { SPCI_FL_BASE0, 4, 115200 }, /* pbn_b0_4_115200 */
++
++ { SPCI_FL_BASE0, 1, 921600 }, /* pbn_b0_1_921600 */
++ { SPCI_FL_BASE0, 2, 921600 }, /* pbn_b0_2_921600 */
++ { SPCI_FL_BASE0, 4, 921600 }, /* pbn_b0_4_921600 */
++
++ { SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 1, 115200 }, /* pbn_b0_bt_1_115200 */
++ { SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 2, 115200 }, /* pbn_b0_bt_2_115200 */
++ { SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 1, 460800 }, /* pbn_b0_bt_1_460800 */
++ { SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 2, 460800 }, /* pbn_b0_bt_2_460800 */
++ { SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 2, 921600 }, /* pbn_b0_bt_2_921600 */
++
++ { SPCI_FL_BASE1, 1, 115200 }, /* pbn_b1_1_115200 */
++ { SPCI_FL_BASE1, 2, 115200 }, /* pbn_b1_2_115200 */
++ { SPCI_FL_BASE1, 4, 115200 }, /* pbn_b1_4_115200 */
++ { SPCI_FL_BASE1, 8, 115200 }, /* pbn_b1_8_115200 */
++
++ { SPCI_FL_BASE1, 2, 921600 }, /* pbn_b1_2_921600 */
++ { SPCI_FL_BASE1, 4, 921600 }, /* pbn_b1_4_921600 */
++ { SPCI_FL_BASE1, 8, 921600 }, /* pbn_b1_8_921600 */
++
++ { SPCI_FL_BASE1, 2, 1382400 }, /* pbn_b1_2_1382400 */
++ { SPCI_FL_BASE1, 4, 1382400 }, /* pbn_b1_4_1382400 */
++ { SPCI_FL_BASE1, 8, 1382400 }, /* pbn_b1_8_1382400 */
++
++ { SPCI_FL_BASE2, 1, 115200 }, /* pbn_b2_1_115200 */
++ { SPCI_FL_BASE2, 8, 115200 }, /* pbn_b2_8_115200 */
++ { SPCI_FL_BASE2, 4, 460800 }, /* pbn_b2_4_460800 */
++ { SPCI_FL_BASE2, 8, 460800 }, /* pbn_b2_8_460800 */
++ { SPCI_FL_BASE2, 16, 460800 }, /* pbn_b2_16_460800 */
++ { SPCI_FL_BASE2, 4, 921600 }, /* pbn_b2_4_921600 */
++ { SPCI_FL_BASE2, 8, 921600 }, /* pbn_b2_8_921600 */
++
++ { SPCI_FL_BASE2 | SPCI_FL_BASE_TABLE, 1, 115200 }, /* pbn_b2_bt_1_115200 */
++ { SPCI_FL_BASE2 | SPCI_FL_BASE_TABLE, 2, 115200 }, /* pbn_b2_bt_2_115200 */
++ { SPCI_FL_BASE2 | SPCI_FL_BASE_TABLE, 4, 115200 }, /* pbn_b2_bt_4_115200 */
++ { SPCI_FL_BASE2 | SPCI_FL_BASE_TABLE, 2, 921600 }, /* pbn_b2_bt_2_921600 */
++
++ { SPCI_FL_BASE2, 2, 921600, /* IOMEM */ /* pbn_panacom */
++ 0x400, 7, pci_plx9050_fn },
++ { SPCI_FL_BASE2 | SPCI_FL_BASE_TABLE, 2, 921600, /* pbn_panacom2 */
++ 0x400, 7, pci_plx9050_fn },
++ { SPCI_FL_BASE2 | SPCI_FL_BASE_TABLE, 4, 921600, /* pbn_panacom4 */
++ 0x400, 7, pci_plx9050_fn },
++ { SPCI_FL_BASE2, 4, 921600, /* pbn_plx_romulus */
++ 0x20, 2, pci_plx9050_fn, 0x03 },
++ /* This board uses the size of PCI Base region 0 to
++ * signal now many ports are available */
++ { SPCI_FL_BASE0 | SPCI_FL_REGION_SZ_CAP, 32, 115200 }, /* pbn_oxsemi */
++ { SPCI_FL_BASE_TABLE, 1, 921600, /* pbn_timedia */
++ 0, 0, pci_timedia_fn },
++ /* EKF addition for i960 Boards form EKF with serial port */
++ { SPCI_FL_BASE0, 32, 921600, /* max 256 ports */ /* pbn_intel_i960 */
++ 8<<2, 2, pci_inteli960ni_fn, 0x10000},
++ { SPCI_FL_BASE0 | SPCI_FL_IRQRESOURCE, /* pbn_sgi_ioc3 */
++ 1, 458333, 0, 0, 0, 0x20178 },
++ { SPCI_FL_BASE0, 5, 115200, 8, 0, pci_hp_diva, 0}, /* pbn_hp_diva */
++#ifdef CONFIG_DDB5074
++ /*
++ * NEC Vrc-5074 (Nile 4) builtin UART.
++ * Conditionally compiled in since this is a motherboard device.
++ */
++ { SPCI_FL_BASE0, 1, 520833, /* pbn_nec_nile4 */
++ 64, 3, NULL, 0x300 },
++#endif
++
++ {SPCI_FL_BASE3, 4, 115200, 8}, /* pbn_dci_pccom4 */
++ {SPCI_FL_BASE3, 8, 115200, 8}, /* pbn_dci_pccom8 */
++
++ { SPCI_FL_BASE0, 1, 115200, /* pbn_xircom_combo */
++ 0, 0, pci_xircom_fn },
++
++ { SPCI_FL_BASE2, 1, 460800, /* pbn_siig10x_0 */
++ 0, 0, pci_siig10x_fn },
++ { SPCI_FL_BASE2, 1, 921600, /* pbn_siig10x_1 */
++ 0, 0, pci_siig10x_fn },
++ { SPCI_FL_BASE2 | SPCI_FL_BASE_TABLE, 2, 921600, /* pbn_siig10x_2 */
++ 0, 0, pci_siig10x_fn },
++ { SPCI_FL_BASE2 | SPCI_FL_BASE_TABLE, 4, 921600, /* pbn_siig10x_4 */
++ 0, 0, pci_siig10x_fn },
++ { SPCI_FL_BASE0, 1, 921600, /* pbn_siix20x_0 */
++ 0, 0, pci_siig20x_fn },
++ { SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 2, 921600, /* pbn_siix20x_2 */
++ 0, 0, pci_siig20x_fn },
++ { SPCI_FL_BASE0 | SPCI_FL_BASE_TABLE, 4, 921600, /* pbn_siix20x_4 */
++ 0, 0, pci_siig20x_fn },
++
++ { SPCI_FL_BASE0, 4, 921600, /* IOMEM */ /* pbn_computone_4 */
++ 0x40, 2, NULL, 0x200 },
++ { SPCI_FL_BASE0, 6, 921600, /* IOMEM */ /* pbn_computone_6 */
++ 0x40, 2, NULL, 0x200 },
++ { SPCI_FL_BASE0, 8, 921600, /* IOMEM */ /* pbn_computone_8 */
++ 0x40, 2, NULL, 0x200 },
++};
++
++/*
++ * Given a complete unknown PCI device, try to use some heuristics to
++ * guess what the configuration might be, based on the pitiful PCI
++ * serial specs. Returns 0 on success, 1 on failure.
++ */
++static int __devinit serial_pci_guess_board(struct pci_dev *dev,
++ struct pci_board *board)
++{
++ int num_iomem = 0, num_port = 0, first_port = -1;
++ int i;
++
++ /*
++ * If it is not a communications device or the programming
++ * interface is greater than 6, give up.
++ *
++ * (Should we try to make guesses for multiport serial devices
++ * later?)
++ */
++ if ((((dev->class >> 8) != PCI_CLASS_COMMUNICATION_SERIAL) &&
++ ((dev->class >> 8) != PCI_CLASS_COMMUNICATION_MODEM)) ||
++ (dev->class & 0xff) > 6)
++ return 1;
++
++ for (i=0; i < 6; i++) {
++ if (IS_PCI_REGION_IOPORT(dev, i)) {
++ num_port++;
++ if (first_port == -1)
++ first_port = i;
++ }
++ if (IS_PCI_REGION_IOMEM(dev, i))
++ num_iomem++;
++ }
++
++ /*
++ * If there is 1 or 0 iomem regions, and exactly one port, use
++ * it.
++ */
++ if (num_iomem <= 1 && num_port == 1) {
++ board->flags = first_port;
++ return 0;
++ }
++ return 1;
++}
++
++static int __devinit serial_init_one(struct pci_dev *dev,
++ const struct pci_device_id *ent)
++{
++ struct pci_board *board, tmp;
++ int rc;
++
++ board = &pci_boards[ent->driver_data];
++
++ rc = pci_enable_device(dev);
++ if (rc) return rc;
++
++ if (ent->driver_data == pbn_default &&
++ serial_pci_guess_board(dev, board))
++ return -ENODEV;
++ else if (serial_pci_guess_board(dev, &tmp) == 0) {
++ printk(KERN_INFO "Redundant entry in serial pci_table. "
++ "Please send the output of\n"
++ "lspci -vv, this message (%04x,%04x,%04x,%04x)\n"
++ "and the manufacturer and name of "
++ "serial board or modem board\n"
++ "to serial-pci-info@lists.sourceforge.net.\n",
++ dev->vendor, dev->device,
++ pci_get_subvendor(dev), pci_get_subdevice(dev));
++ }
++
++ start_pci_pnp_board(dev, board);
++
++ return 0;
++}
++
++static void __devexit serial_remove_one(struct pci_dev *dev)
++{
++ int i;
++
++ /*
++ * Iterate through all of the ports finding those that belong
++ * to this PCI device.
++ */
++ for(i = 0; i < NR_PORTS; i++) {
++ if (rs_table[i].dev != dev)
++ continue;
++ unregister_serial(i);
++ rs_table[i].dev = 0;
++ }
++ /*
++ * Now execute any board-specific shutdown procedure
++ */
++ for (i=0; i < NR_PCI_BOARDS; i++) {
++ struct pci_board_inst *brd = &serial_pci_board[i];
++
++ if (serial_pci_board[i].dev != dev)
++ continue;
++ if (brd->board.init_fn)
++ (brd->board.init_fn)(brd->dev, &brd->board, 0);
++ if (DEACTIVATE_FUNC(brd->dev))
++ (DEACTIVATE_FUNC(brd->dev))(brd->dev);
++ serial_pci_board[i].dev = 0;
++ }
++}
++
++
++static struct pci_device_id serial_pci_tbl[] __devinitdata = {
++ { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960,
++ PCI_SUBVENDOR_ID_CONNECT_TECH,
++ PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232, 0, 0,
++ pbn_b1_8_1382400 },
++ { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960,
++ PCI_SUBVENDOR_ID_CONNECT_TECH,
++ PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_232, 0, 0,
++ pbn_b1_4_1382400 },
++ { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960,
++ PCI_SUBVENDOR_ID_CONNECT_TECH,
++ PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_232, 0, 0,
++ pbn_b1_2_1382400 },
++ { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
++ PCI_SUBVENDOR_ID_CONNECT_TECH,
++ PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232, 0, 0,
++ pbn_b1_8_1382400 },
++ { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
++ PCI_SUBVENDOR_ID_CONNECT_TECH,
++ PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_232, 0, 0,
++ pbn_b1_4_1382400 },
++ { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
++ PCI_SUBVENDOR_ID_CONNECT_TECH,
++ PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_232, 0, 0,
++ pbn_b1_2_1382400 },
++ { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
++ PCI_SUBVENDOR_ID_CONNECT_TECH,
++ PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485, 0, 0,
++ pbn_b1_8_921600 },
++ { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
++ PCI_SUBVENDOR_ID_CONNECT_TECH,
++ PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485_4_4, 0, 0,
++ pbn_b1_8_921600 },
++ { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
++ PCI_SUBVENDOR_ID_CONNECT_TECH,
++ PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_485, 0, 0,
++ pbn_b1_4_921600 },
++ { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
++ PCI_SUBVENDOR_ID_CONNECT_TECH,
++ PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_485_2_2, 0, 0,
++ pbn_b1_4_921600 },
++ { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
++ PCI_SUBVENDOR_ID_CONNECT_TECH,
++ PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_485, 0, 0,
++ pbn_b1_2_921600 },
++ { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
++ PCI_SUBVENDOR_ID_CONNECT_TECH,
++ PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485_2_6, 0, 0,
++ pbn_b1_8_921600 },
++ { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
++ PCI_SUBVENDOR_ID_CONNECT_TECH,
++ PCI_SUBDEVICE_ID_CONNECT_TECH_BH081101V1, 0, 0,
++ pbn_b1_8_921600 },
++ { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
++ PCI_SUBVENDOR_ID_CONNECT_TECH,
++ PCI_SUBDEVICE_ID_CONNECT_TECH_BH041101V1, 0, 0,
++ pbn_b1_4_921600 },
++
++ { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_U530,
++ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
++ pbn_b2_bt_1_115200 },
++ { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM2,
++ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
++ pbn_b2_bt_2_115200 },
++ { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM422,
++ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
++ pbn_b2_bt_4_115200 },
++ { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM232,
++ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
++ pbn_b2_bt_2_115200 },
++ { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_COMM4,
++ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
++ pbn_b2_bt_4_115200 },
++ { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_COMM8,
++ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
++ pbn_b2_8_115200 },
++
++ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_GTEK_SERIAL2,
++ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
++ pbn_b2_bt_2_115200 },
++ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_SPCOM200,
++ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
++ pbn_b2_bt_2_921600 },
++ /* VScom SPCOM800, from sl@s.pl */
++ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_SPCOM800,
++ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
++ pbn_b2_8_921600 },
++ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_1077,
++ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
++ pbn_b2_4_921600 },
++ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
++ PCI_SUBVENDOR_ID_KEYSPAN,
++ PCI_SUBDEVICE_ID_KEYSPAN_SX2, 0, 0,
++ pbn_panacom },
++ { PCI_VENDOR_ID_PANACOM, PCI_DEVICE_ID_PANACOM_QUADMODEM,
++ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
++ pbn_panacom4 },
++ { PCI_VENDOR_ID_PANACOM, PCI_DEVICE_ID_PANACOM_DUALMODEM,
++ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
++ pbn_panacom2 },
++ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
++ PCI_SUBVENDOR_ID_CHASE_PCIFAST,
++ PCI_SUBDEVICE_ID_CHASE_PCIFAST4, 0, 0,
++ pbn_b2_4_460800 },
++ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
++ PCI_SUBVENDOR_ID_CHASE_PCIFAST,
++ PCI_SUBDEVICE_ID_CHASE_PCIFAST8, 0, 0,
++ pbn_b2_8_460800 },
++ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
++ PCI_SUBVENDOR_ID_CHASE_PCIFAST,
++ PCI_SUBDEVICE_ID_CHASE_PCIFAST16, 0, 0,
++ pbn_b2_16_460800 },
++ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
++ PCI_SUBVENDOR_ID_CHASE_PCIFAST,
++ PCI_SUBDEVICE_ID_CHASE_PCIFAST16FMC, 0, 0,
++ pbn_b2_16_460800 },
++ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
++ PCI_SUBVENDOR_ID_CHASE_PCIRAS,
++ PCI_SUBDEVICE_ID_CHASE_PCIRAS4, 0, 0,
++ pbn_b2_4_460800 },
++ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
++ PCI_SUBVENDOR_ID_CHASE_PCIRAS,
++ PCI_SUBDEVICE_ID_CHASE_PCIRAS8, 0, 0,
++ pbn_b2_8_460800 },
++ /* Megawolf Romulus PCI Serial Card, from Mike Hudson */
++ /* (Exoray@isys.ca) */
++ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_ROMULUS,
++ 0x10b5, 0x106a, 0, 0,
++ pbn_plx_romulus },
++ { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_QSC100,
++ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
++ pbn_b1_4_115200 },
++ { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSC100,
++ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
++ pbn_b1_2_115200 },
++ { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_ESC100D,
++ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
++ pbn_b1_8_115200 },
++ { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_ESC100M,
++ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
++ pbn_b1_8_115200 },
++ { PCI_VENDOR_ID_SPECIALIX, PCI_DEVICE_ID_OXSEMI_16PCI954,
++ PCI_VENDOR_ID_SPECIALIX, PCI_SUBDEVICE_ID_SPECIALIX_SPEED4, 0, 0,
++ pbn_b0_4_921600 },
++ { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954,
++ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
++ pbn_b0_4_115200 },
++ { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI952,
++ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
++ pbn_b0_bt_2_921600 },
++
++ /* Digitan DS560-558, from jimd@esoft.com */
++ { PCI_VENDOR_ID_ATT, PCI_DEVICE_ID_ATT_VENUS_MODEM,
++ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
++ pbn_b1_1_115200 },
++
++ /* 3Com US Robotics 56k Voice Internal PCI model 5610 */
++ { PCI_VENDOR_ID_USR, 0x1008,
++ PCI_ANY_ID, PCI_ANY_ID, },
++
++ /* Titan Electronic cards */
++ { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100,
++ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
++ pbn_b0_1_921600 },
++ { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200,
++ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
++ pbn_b0_2_921600 },
++ { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400,
++ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
++ pbn_b0_4_921600 },
++ { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800B,
++ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
++ pbn_b0_4_921600 },
++ { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100L,
++ PCI_ANY_ID, PCI_ANY_ID,
++ SPCI_FL_BASE1, 1, 921600 },
++ { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200L,
++ PCI_ANY_ID, PCI_ANY_ID,
++ SPCI_FL_BASE1 | SPCI_FL_BASE_TABLE, 2, 921600 },
++ /* The 400L and 800L have a custom hack in get_pci_port */
++ { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400L,
++ PCI_ANY_ID, PCI_ANY_ID,
++ SPCI_FL_BASE_TABLE, 4, 921600 },
++ { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800L,
++ PCI_ANY_ID, PCI_ANY_ID,
++ SPCI_FL_BASE_TABLE, 8, 921600 },
++
++ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_550,
++ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
++ pbn_siig10x_0 },
++ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_650,
++ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
++ pbn_siig10x_0 },
++ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_850,
++ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
++ pbn_siig10x_0 },
++ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_550,
++ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
++ pbn_siig10x_2 },
++ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_650,
++ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
++ pbn_siig10x_2 },
++ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_850,
++ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
++ pbn_siig10x_2 },
++ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_550,
++ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
++ pbn_siig10x_4 },
++ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_650,
++ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
++ pbn_siig10x_4 },
++ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_850,
++ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
++ pbn_siig10x_4 },
++ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_550,
++ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
++ pbn_siig20x_0 },
++ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_650,
++ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
++ pbn_siig20x_0 },
++ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_850,
++ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
++ pbn_siig20x_0 },
++ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_550,
++ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
++ pbn_siig20x_2 },
++ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_650,
++ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
++ pbn_siig20x_2 },
++ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_850,
++ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
++ pbn_siig20x_2 },
++ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_550,
++ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
++ pbn_siig20x_4 },
++ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_650,
++ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
++ pbn_siig20x_4 },
++ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_850,
++ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
++ pbn_siig20x_4 },
++
++ /* Computone devices submitted by Doug McNash dmcnash@computone.com */
++ { PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG,
++ PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG4,
++ 0, 0, pbn_computone_4 },
++ { PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG,
++ PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG8,
++ 0, 0, pbn_computone_8 },
++ { PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG,
++ PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG6,
++ 0, 0, pbn_computone_6 },
++
++ { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI95N,
++ PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_oxsemi },
++ { PCI_VENDOR_ID_TIMEDIA, PCI_DEVICE_ID_TIMEDIA_1889,
++ PCI_VENDOR_ID_TIMEDIA, PCI_ANY_ID, 0, 0, pbn_timedia },
++
++ { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_DSERIAL,
++ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
++ pbn_b0_bt_2_115200 },
++ { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATRO_A,
++ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
++ pbn_b0_bt_2_115200 },
++ { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATRO_B,
++ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
++ pbn_b0_bt_2_115200 },
++ { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_PORT_PLUS,
++ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
++ pbn_b0_bt_2_460800 },
++ { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUAD_A,
++ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
++ pbn_b0_bt_2_460800 },
++ { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUAD_B,
++ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
++ pbn_b0_bt_2_460800 },
++ { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_SSERIAL,
++ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
++ pbn_b0_bt_1_115200 },
++ { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_PORT_650,
++ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
++ pbn_b0_bt_1_460800 },
++
++ /* RAStel 2 port modem, gerg@moreton.com.au */
++ { PCI_VENDOR_ID_MORETON, PCI_DEVICE_ID_RASTEL_2PORT,
++ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
++ pbn_b2_bt_2_115200 },
++
++ /* EKF addition for i960 Boards form EKF with serial port */
++ { PCI_VENDOR_ID_INTEL, 0x1960,
++ 0xE4BF, PCI_ANY_ID, 0, 0,
++ pbn_intel_i960 },
++
++ /* Xircom Cardbus/Ethernet combos */
++ { PCI_VENDOR_ID_XIRCOM, PCI_DEVICE_ID_XIRCOM_X3201_MDM,
++ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
++ pbn_xircom_combo },
++
++ /*
++ * Untested PCI modems, sent in from various folks...
++ */
++
++ /* Elsa Model 56K PCI Modem, from Andreas Rath <arh@01019freenet.de> */
++ { PCI_VENDOR_ID_ROCKWELL, 0x1004,
++ 0x1048, 0x1500, 0, 0,
++ pbn_b1_1_115200 },
++
++ { PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_IOC3,
++ 0xFF00, 0, 0, 0,
++ pbn_sgi_ioc3 },
++
++ /* HP Diva card */
++ { PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_SAS,
++ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
++ pbn_hp_diva },
++ { PCI_VENDOR_ID_HP, 0x1290,
++ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
++ pbn_b2_1_115200 },
++
++#ifdef CONFIG_DDB5074
++ /*
++ * NEC Vrc-5074 (Nile 4) builtin UART.
++ * Conditionally compiled in since this is a motherboard device.
++ */
++ { PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_NILE4,
++ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
++ pbn_nec_nile4 },
++#endif
++
++ { PCI_VENDOR_ID_DCI, PCI_DEVICE_ID_DCI_PCCOM4,
++ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
++ pbn_dci_pccom4 },
++ { PCI_VENDOR_ID_DCI, PCI_DEVICE_ID_DCI_PCCOM8,
++ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
++ pbn_dci_pccom8 },
++
++ { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
++ PCI_CLASS_COMMUNICATION_SERIAL << 8, 0xffff00, },
++ { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
++ PCI_CLASS_COMMUNICATION_MODEM << 8, 0xffff00, },
++ { 0, }
++};
++
++MODULE_DEVICE_TABLE(pci, serial_pci_tbl);
++
++static struct pci_driver serial_pci_driver = {
++ name: "serial",
++ probe: serial_init_one,
++ remove: __devexit_p(serial_remove_one),
++ id_table: serial_pci_tbl,
++};
++
++
++/*
++ * Query PCI space for known serial boards
++ * If found, add them to the PCI device space in rs_table[]
++ *
++ * Accept a maximum of eight boards
++ *
++ */
++static void __devinit probe_serial_pci(void)
++{
++#ifdef SERIAL_DEBUG_PCI
++ printk(KERN_DEBUG "Entered probe_serial_pci()\n");
++#endif
++
++ /* Register call PCI serial devices. Null out
++ * the driver name upon failure, as a signal
++ * not to attempt to unregister the driver later
++ */
++ if (pci_module_init (&serial_pci_driver) != 0)
++ serial_pci_driver.name = "";
++
++#ifdef SERIAL_DEBUG_PCI
++ printk(KERN_DEBUG "Leaving probe_serial_pci() (probe finished)\n");
++#endif
++ return;
++}
++
++#endif /* ENABLE_SERIAL_PCI */
++
++#ifdef ENABLE_SERIAL_PNP
++
++struct pnp_board {
++ unsigned short vendor;
++ unsigned short device;
++};
++
++static struct pnp_board pnp_devices[] __devinitdata = {
++ /* Archtek America Corp. */
++ /* Archtek SmartLink Modem 3334BT Plug & Play */
++ { ISAPNP_VENDOR('A', 'A', 'C'), ISAPNP_DEVICE(0x000F) },
++ /* Anchor Datacomm BV */
++ /* SXPro 144 External Data Fax Modem Plug & Play */
++ { ISAPNP_VENDOR('A', 'D', 'C'), ISAPNP_DEVICE(0x0001) },
++ /* SXPro 288 External Data Fax Modem Plug & Play */
++ { ISAPNP_VENDOR('A', 'D', 'C'), ISAPNP_DEVICE(0x0002) },
++ /* Rockwell 56K ACF II Fax+Data+Voice Modem */
++ { ISAPNP_VENDOR('A', 'K', 'Y'), ISAPNP_DEVICE(0x1021) },
++ /* AZT3005 PnP SOUND DEVICE */
++ { ISAPNP_VENDOR('A', 'Z', 'T'), ISAPNP_DEVICE(0x4001) },
++ /* Best Data Products Inc. Smart One 336F PnP Modem */
++ { ISAPNP_VENDOR('B', 'D', 'P'), ISAPNP_DEVICE(0x3336) },
++ /* Boca Research */
++ /* Boca Complete Ofc Communicator 14.4 Data-FAX */
++ { ISAPNP_VENDOR('B', 'R', 'I'), ISAPNP_DEVICE(0x0A49) },
++ /* Boca Research 33,600 ACF Modem */
++ { ISAPNP_VENDOR('B', 'R', 'I'), ISAPNP_DEVICE(0x1400) },
++ /* Boca 33.6 Kbps Internal FD34FSVD */
++ { ISAPNP_VENDOR('B', 'R', 'I'), ISAPNP_DEVICE(0x3400) },
++ /* Boca 33.6 Kbps Internal FD34FSVD */
++ { ISAPNP_VENDOR('B', 'R', 'I'), ISAPNP_DEVICE(0x0A49) },
++ /* Best Data Products Inc. Smart One 336F PnP Modem */
++ { ISAPNP_VENDOR('B', 'D', 'P'), ISAPNP_DEVICE(0x3336) },
++ /* Computer Peripherals Inc */
++ /* EuroViVa CommCenter-33.6 SP PnP */
++ { ISAPNP_VENDOR('C', 'P', 'I'), ISAPNP_DEVICE(0x4050) },
++ /* Creative Labs */
++ /* Creative Labs Phone Blaster 28.8 DSVD PnP Voice */
++ { ISAPNP_VENDOR('C', 'T', 'L'), ISAPNP_DEVICE(0x3001) },
++ /* Creative Labs Modem Blaster 28.8 DSVD PnP Voice */
++ { ISAPNP_VENDOR('C', 'T', 'L'), ISAPNP_DEVICE(0x3011) },
++ /* Creative */
++ /* Creative Modem Blaster Flash56 DI5601-1 */
++ { ISAPNP_VENDOR('D', 'M', 'B'), ISAPNP_DEVICE(0x1032) },
++ /* Creative Modem Blaster V.90 DI5660 */
++ { ISAPNP_VENDOR('D', 'M', 'B'), ISAPNP_DEVICE(0x2001) },
++ /* FUJITSU */
++ /* Fujitsu 33600 PnP-I2 R Plug & Play */
++ { ISAPNP_VENDOR('F', 'U', 'J'), ISAPNP_DEVICE(0x0202) },
++ /* Fujitsu FMV-FX431 Plug & Play */
++ { ISAPNP_VENDOR('F', 'U', 'J'), ISAPNP_DEVICE(0x0205) },
++ /* Fujitsu 33600 PnP-I4 R Plug & Play */
++ { ISAPNP_VENDOR('F', 'U', 'J'), ISAPNP_DEVICE(0x0206) },
++ /* Fujitsu Fax Voice 33600 PNP-I5 R Plug & Play */
++ { ISAPNP_VENDOR('F', 'U', 'J'), ISAPNP_DEVICE(0x0209) },
++ /* Archtek America Corp. */
++ /* Archtek SmartLink Modem 3334BT Plug & Play */
++ { ISAPNP_VENDOR('G', 'V', 'C'), ISAPNP_DEVICE(0x000F) },
++ /* Hayes */
++ /* Hayes Optima 288 V.34-V.FC + FAX + Voice Plug & Play */
++ { ISAPNP_VENDOR('H', 'A', 'Y'), ISAPNP_DEVICE(0x0001) },
++ /* Hayes Optima 336 V.34 + FAX + Voice PnP */
++ { ISAPNP_VENDOR('H', 'A', 'Y'), ISAPNP_DEVICE(0x000C) },
++ /* Hayes Optima 336B V.34 + FAX + Voice PnP */
++ { ISAPNP_VENDOR('H', 'A', 'Y'), ISAPNP_DEVICE(0x000D) },
++ /* Hayes Accura 56K Ext Fax Modem PnP */
++ { ISAPNP_VENDOR('H', 'A', 'Y'), ISAPNP_DEVICE(0x5670) },
++ /* Hayes Accura 56K Ext Fax Modem PnP */
++ { ISAPNP_VENDOR('H', 'A', 'Y'), ISAPNP_DEVICE(0x5674) },
++ /* Hayes Accura 56K Fax Modem PnP */
++ { ISAPNP_VENDOR('H', 'A', 'Y'), ISAPNP_DEVICE(0x5675) },
++ /* Hayes 288, V.34 + FAX */
++ { ISAPNP_VENDOR('H', 'A', 'Y'), ISAPNP_DEVICE(0xF000) },
++ /* Hayes Optima 288 V.34 + FAX + Voice, Plug & Play */
++ { ISAPNP_VENDOR('H', 'A', 'Y'), ISAPNP_DEVICE(0xF001) },
++ /* IBM */
++ /* IBM Thinkpad 701 Internal Modem Voice */
++ { ISAPNP_VENDOR('I', 'B', 'M'), ISAPNP_DEVICE(0x0033) },
++ /* Intertex */
++ /* Intertex 28k8 33k6 Voice EXT PnP */
++ { ISAPNP_VENDOR('I', 'X', 'D'), ISAPNP_DEVICE(0xC801) },
++ /* Intertex 33k6 56k Voice EXT PnP */
++ { ISAPNP_VENDOR('I', 'X', 'D'), ISAPNP_DEVICE(0xC901) },
++ /* Intertex 28k8 33k6 Voice SP EXT PnP */
++ { ISAPNP_VENDOR('I', 'X', 'D'), ISAPNP_DEVICE(0xD801) },
++ /* Intertex 33k6 56k Voice SP EXT PnP */
++ { ISAPNP_VENDOR('I', 'X', 'D'), ISAPNP_DEVICE(0xD901) },
++ /* Intertex 28k8 33k6 Voice SP INT PnP */
++ { ISAPNP_VENDOR('I', 'X', 'D'), ISAPNP_DEVICE(0xF401) },
++ /* Intertex 28k8 33k6 Voice SP EXT PnP */
++ { ISAPNP_VENDOR('I', 'X', 'D'), ISAPNP_DEVICE(0xF801) },
++ /* Intertex 33k6 56k Voice SP EXT PnP */
++ { ISAPNP_VENDOR('I', 'X', 'D'), ISAPNP_DEVICE(0xF901) },
++ /* Kortex International */
++ /* KORTEX 28800 Externe PnP */
++ { ISAPNP_VENDOR('K', 'O', 'R'), ISAPNP_DEVICE(0x4522) },
++ /* KXPro 33.6 Vocal ASVD PnP */
++ { ISAPNP_VENDOR('K', 'O', 'R'), ISAPNP_DEVICE(0xF661) },
++ /* Lasat */
++ /* LASAT Internet 33600 PnP */
++ { ISAPNP_VENDOR('L', 'A', 'S'), ISAPNP_DEVICE(0x4040) },
++ /* Lasat Safire 560 PnP */
++ { ISAPNP_VENDOR('L', 'A', 'S'), ISAPNP_DEVICE(0x4540) },
++ /* Lasat Safire 336 PnP */
++ { ISAPNP_VENDOR('L', 'A', 'S'), ISAPNP_DEVICE(0x5440) },
++ /* Microcom, Inc. */
++ /* Microcom TravelPorte FAST V.34 Plug & Play */
++ { ISAPNP_VENDOR('M', 'N', 'P'), ISAPNP_DEVICE(0x281) },
++ /* Microcom DeskPorte V.34 FAST or FAST+ Plug & Play */
++ { ISAPNP_VENDOR('M', 'N', 'P'), ISAPNP_DEVICE(0x0336) },
++ /* Microcom DeskPorte FAST EP 28.8 Plug & Play */
++ { ISAPNP_VENDOR('M', 'N', 'P'), ISAPNP_DEVICE(0x0339) },
++ /* Microcom DeskPorte 28.8P Plug & Play */
++ { ISAPNP_VENDOR('M', 'N', 'P'), ISAPNP_DEVICE(0x0342) },
++ /* Microcom DeskPorte FAST ES 28.8 Plug & Play */
++ { ISAPNP_VENDOR('M', 'N', 'P'), ISAPNP_DEVICE(0x0500) },
++ /* Microcom DeskPorte FAST ES 28.8 Plug & Play */
++ { ISAPNP_VENDOR('M', 'N', 'P'), ISAPNP_DEVICE(0x0501) },
++ /* Microcom DeskPorte 28.8S Internal Plug & Play */
++ { ISAPNP_VENDOR('M', 'N', 'P'), ISAPNP_DEVICE(0x0502) },
++ /* Motorola */
++ /* Motorola BitSURFR Plug & Play */
++ { ISAPNP_VENDOR('M', 'O', 'T'), ISAPNP_DEVICE(0x1105) },
++ /* Motorola TA210 Plug & Play */
++ { ISAPNP_VENDOR('M', 'O', 'T'), ISAPNP_DEVICE(0x1111) },
++ /* Motorola HMTA 200 (ISDN) Plug & Play */
++ { ISAPNP_VENDOR('M', 'O', 'T'), ISAPNP_DEVICE(0x1114) },
++ /* Motorola BitSURFR Plug & Play */
++ { ISAPNP_VENDOR('M', 'O', 'T'), ISAPNP_DEVICE(0x1115) },
++ /* Motorola Lifestyle 28.8 Internal */
++ { ISAPNP_VENDOR('M', 'O', 'T'), ISAPNP_DEVICE(0x1190) },
++ /* Motorola V.3400 Plug & Play */
++ { ISAPNP_VENDOR('M', 'O', 'T'), ISAPNP_DEVICE(0x1501) },
++ /* Motorola Lifestyle 28.8 V.34 Plug & Play */
++ { ISAPNP_VENDOR('M', 'O', 'T'), ISAPNP_DEVICE(0x1502) },
++ /* Motorola Power 28.8 V.34 Plug & Play */
++ { ISAPNP_VENDOR('M', 'O', 'T'), ISAPNP_DEVICE(0x1505) },
++ /* Motorola ModemSURFR External 28.8 Plug & Play */
++ { ISAPNP_VENDOR('M', 'O', 'T'), ISAPNP_DEVICE(0x1509) },
++ /* Motorola Premier 33.6 Desktop Plug & Play */
++ { ISAPNP_VENDOR('M', 'O', 'T'), ISAPNP_DEVICE(0x150A) },
++ /* Motorola VoiceSURFR 56K External PnP */
++ { ISAPNP_VENDOR('M', 'O', 'T'), ISAPNP_DEVICE(0x150F) },
++ /* Motorola ModemSURFR 56K External PnP */
++ { ISAPNP_VENDOR('M', 'O', 'T'), ISAPNP_DEVICE(0x1510) },
++ /* Motorola ModemSURFR 56K Internal PnP */
++ { ISAPNP_VENDOR('M', 'O', 'T'), ISAPNP_DEVICE(0x1550) },
++ /* Motorola ModemSURFR Internal 28.8 Plug & Play */
++ { ISAPNP_VENDOR('M', 'O', 'T'), ISAPNP_DEVICE(0x1560) },
++ /* Motorola Premier 33.6 Internal Plug & Play */
++ { ISAPNP_VENDOR('M', 'O', 'T'), ISAPNP_DEVICE(0x1580) },
++ /* Motorola OnlineSURFR 28.8 Internal Plug & Play */
++ { ISAPNP_VENDOR('M', 'O', 'T'), ISAPNP_DEVICE(0x15B0) },
++ /* Motorola VoiceSURFR 56K Internal PnP */
++ { ISAPNP_VENDOR('M', 'O', 'T'), ISAPNP_DEVICE(0x15F0) },
++ /* Com 1 */
++ /* Deskline K56 Phone System PnP */
++ { ISAPNP_VENDOR('M', 'V', 'X'), ISAPNP_DEVICE(0x00A1) },
++ /* PC Rider K56 Phone System PnP */
++ { ISAPNP_VENDOR('M', 'V', 'X'), ISAPNP_DEVICE(0x00F2) },
++ /* Pace 56 Voice Internal Plug & Play Modem */
++ { ISAPNP_VENDOR('P', 'M', 'C'), ISAPNP_DEVICE(0x2430) },
++ /* Generic */
++ /* Generic standard PC COM port */
++ { ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_DEVICE(0x0500) },
++ /* Generic 16550A-compatible COM port */
++ { ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_DEVICE(0x0501) },
++ /* Compaq 14400 Modem */
++ { ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_DEVICE(0xC000) },
++ /* Compaq 2400/9600 Modem */
++ { ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_DEVICE(0xC001) },
++ /* Dial-Up Networking Serial Cable between 2 PCs */
++ { ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_DEVICE(0xC031) },
++ /* Dial-Up Networking Parallel Cable between 2 PCs */
++ { ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_DEVICE(0xC032) },
++ /* Standard 9600 bps Modem */
++ { ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_DEVICE(0xC100) },
++ /* Standard 14400 bps Modem */
++ { ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_DEVICE(0xC101) },
++ /* Standard 28800 bps Modem*/
++ { ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_DEVICE(0xC102) },
++ /* Standard Modem*/
++ { ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_DEVICE(0xC103) },
++ /* Standard 9600 bps Modem*/
++ { ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_DEVICE(0xC104) },
++ /* Standard 14400 bps Modem*/
++ { ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_DEVICE(0xC105) },
++ /* Standard 28800 bps Modem*/
++ { ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_DEVICE(0xC106) },
++ /* Standard Modem */
++ { ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_DEVICE(0xC107) },
++ /* Standard 9600 bps Modem */
++ { ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_DEVICE(0xC108) },
++ /* Standard 14400 bps Modem */
++ { ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_DEVICE(0xC109) },
++ /* Standard 28800 bps Modem */
++ { ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_DEVICE(0xC10A) },
++ /* Standard Modem */
++ { ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_DEVICE(0xC10B) },
++ /* Standard 9600 bps Modem */
++ { ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_DEVICE(0xC10C) },
++ /* Standard 14400 bps Modem */
++ { ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_DEVICE(0xC10D) },
++ /* Standard 28800 bps Modem */
++ { ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_DEVICE(0xC10E) },
++ /* Standard Modem */
++ { ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_DEVICE(0xC10F) },
++ /* Standard PCMCIA Card Modem */
++ { ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_DEVICE(0x2000) },
++ /* Rockwell */
++ /* Modular Technology */
++ /* Rockwell 33.6 DPF Internal PnP */
++ /* Modular Technology 33.6 Internal PnP */
++ { ISAPNP_VENDOR('R', 'O', 'K'), ISAPNP_DEVICE(0x0030) },
++ /* Kortex International */
++ /* KORTEX 14400 Externe PnP */
++ { ISAPNP_VENDOR('R', 'O', 'K'), ISAPNP_DEVICE(0x0100) },
++ /* Viking Components, Inc */
++ /* Viking 28.8 INTERNAL Fax+Data+Voice PnP */
++ { ISAPNP_VENDOR('R', 'O', 'K'), ISAPNP_DEVICE(0x4920) },
++ /* Rockwell */
++ /* British Telecom */
++ /* Modular Technology */
++ /* Rockwell 33.6 DPF External PnP */
++ /* BT Prologue 33.6 External PnP */
++ /* Modular Technology 33.6 External PnP */
++ { ISAPNP_VENDOR('R', 'S', 'S'), ISAPNP_DEVICE(0x00A0) },
++ /* Viking 56K FAX INT */
++ { ISAPNP_VENDOR('R', 'S', 'S'), ISAPNP_DEVICE(0x0262) },
++ /* SupraExpress 28.8 Data/Fax PnP modem */
++ { ISAPNP_VENDOR('S', 'U', 'P'), ISAPNP_DEVICE(0x1310) },
++ /* SupraExpress 33.6 Data/Fax PnP modem */
++ { ISAPNP_VENDOR('S', 'U', 'P'), ISAPNP_DEVICE(0x1421) },
++ /* SupraExpress 33.6 Data/Fax PnP modem */
++ { ISAPNP_VENDOR('S', 'U', 'P'), ISAPNP_DEVICE(0x1590) },
++ /* SupraExpress 33.6 Data/Fax PnP modem */
++ { ISAPNP_VENDOR('S', 'U', 'P'), ISAPNP_DEVICE(0x1760) },
++ /* Phoebe Micro */
++ /* Phoebe Micro 33.6 Data Fax 1433VQH Plug & Play */
++ { ISAPNP_VENDOR('T', 'E', 'X'), ISAPNP_DEVICE(0x0011) },
++ /* Archtek America Corp. */
++ /* Archtek SmartLink Modem 3334BT Plug & Play */
++ { ISAPNP_VENDOR('U', 'A', 'C'), ISAPNP_DEVICE(0x000F) },
++ /* 3Com Corp. */
++ /* Gateway Telepath IIvi 33.6 */
++ { ISAPNP_VENDOR('U', 'S', 'R'), ISAPNP_DEVICE(0x0000) },
++ /* Sportster Vi 14.4 PnP FAX Voicemail */
++ { ISAPNP_VENDOR('U', 'S', 'R'), ISAPNP_DEVICE(0x0004) },
++ /* U.S. Robotics 33.6K Voice INT PnP */
++ { ISAPNP_VENDOR('U', 'S', 'R'), ISAPNP_DEVICE(0x0006) },
++ /* U.S. Robotics 33.6K Voice EXT PnP */
++ { ISAPNP_VENDOR('U', 'S', 'R'), ISAPNP_DEVICE(0x0007) },
++ /* U.S. Robotics 33.6K Voice INT PnP */
++ { ISAPNP_VENDOR('U', 'S', 'R'), ISAPNP_DEVICE(0x2002) },
++ /* U.S. Robotics 56K Voice INT PnP */
++ { ISAPNP_VENDOR('U', 'S', 'R'), ISAPNP_DEVICE(0x2070) },
++ /* U.S. Robotics 56K Voice EXT PnP */
++ { ISAPNP_VENDOR('U', 'S', 'R'), ISAPNP_DEVICE(0x2080) },
++ /* U.S. Robotics 56K FAX INT */
++ { ISAPNP_VENDOR('U', 'S', 'R'), ISAPNP_DEVICE(0x3031) },
++ /* U.S. Robotics 56K Voice INT PnP */
++ { ISAPNP_VENDOR('U', 'S', 'R'), ISAPNP_DEVICE(0x3070) },
++ /* U.S. Robotics 56K Voice EXT PnP */
++ { ISAPNP_VENDOR('U', 'S', 'R'), ISAPNP_DEVICE(0x3080) },
++ /* U.S. Robotics 56K Voice INT PnP */
++ { ISAPNP_VENDOR('U', 'S', 'R'), ISAPNP_DEVICE(0x3090) },
++ /* U.S. Robotics 56K Message */
++ { ISAPNP_VENDOR('U', 'S', 'R'), ISAPNP_DEVICE(0x9100) },
++ /* U.S. Robotics 56K FAX EXT PnP*/
++ { ISAPNP_VENDOR('U', 'S', 'R'), ISAPNP_DEVICE(0x9160) },
++ /* U.S. Robotics 56K FAX INT PnP*/
++ { ISAPNP_VENDOR('U', 'S', 'R'), ISAPNP_DEVICE(0x9170) },
++ /* U.S. Robotics 56K Voice EXT PnP*/
++ { ISAPNP_VENDOR('U', 'S', 'R'), ISAPNP_DEVICE(0x9180) },
++ /* U.S. Robotics 56K Voice INT PnP*/
++ { ISAPNP_VENDOR('U', 'S', 'R'), ISAPNP_DEVICE(0x9190) },
++ { 0, }
++};
++
++static inline void avoid_irq_share(struct pci_dev *dev)
++{
++ int i, map = 0x1FF8;
++ struct serial_state *state = rs_table;
++ struct isapnp_irq *irq;
++ struct isapnp_resources *res = dev->sysdata;
++
++ for (i = 0; i < NR_PORTS; i++) {
++ if (state->type != PORT_UNKNOWN)
++ clear_bit(state->irq, &map);
++ state++;
++ }
++
++ for ( ; res; res = res->alt)
++ for(irq = res->irq; irq; irq = irq->next)
++ irq->map = map;
++}
++
++static char *modem_names[] __devinitdata = {
++ "MODEM", "Modem", "modem", "FAX", "Fax", "fax",
++ "56K", "56k", "K56", "33.6", "28.8", "14.4",
++ "33,600", "28,800", "14,400", "33.600", "28.800", "14.400",
++ "33600", "28800", "14400", "V.90", "V.34", "V.32", 0
++};
++
++static int __devinit check_name(char *name)
++{
++ char **tmp = modem_names;
++
++ while (*tmp) {
++ if (strstr(name, *tmp))
++ return 1;
++ tmp++;
++ }
++ return 0;
++}
++
++static inline int check_compatible_id(struct pci_dev *dev)
++{
++ int i;
++ for (i = 0; i < DEVICE_COUNT_COMPATIBLE; i++)
++ if ((dev->vendor_compatible[i] ==
++ ISAPNP_VENDOR('P', 'N', 'P')) &&
++ (swab16(dev->device_compatible[i]) >= 0xc000) &&
++ (swab16(dev->device_compatible[i]) <= 0xdfff))
++ return 0;
++ return 1;
++}
++
++/*
++ * Given a complete unknown ISA PnP device, try to use some heuristics to
++ * detect modems. Currently use such heuristic set:
++ * - dev->name or dev->bus->name must contain "modem" substring;
++ * - device must have only one IO region (8 byte long) with base adress
++ * 0x2e8, 0x3e8, 0x2f8 or 0x3f8.
++ *
++ * Such detection looks very ugly, but can detect at least some of numerous
++ * ISA PnP modems, alternatively we must hardcode all modems in pnp_devices[]
++ * table.
++ */
++static int _INLINE_ serial_pnp_guess_board(struct pci_dev *dev,
++ struct pci_board *board)
++{
++ struct isapnp_resources *res = (struct isapnp_resources *)dev->sysdata;
++ struct isapnp_resources *resa;
++
++ if (!(check_name(dev->name) || check_name(dev->bus->name)) &&
++ !(check_compatible_id(dev)))
++ return 1;
++
++ if (!res || res->next)
++ return 1;
++
++ for (resa = res->alt; resa; resa = resa->alt) {
++ struct isapnp_port *port;
++ for (port = res->port; port; port = port->next)
++ if ((port->size == 8) &&
++ ((port->min == 0x2f8) ||
++ (port->min == 0x3f8) ||
++ (port->min == 0x2e8) ||
++ (port->min == 0x3e8)))
++ return 0;
++ }
++
++ return 1;
++}
++
++static void __devinit probe_serial_pnp(void)
++{
++ struct pci_dev *dev = NULL;
++ struct pnp_board *pnp_board;
++ struct pci_board board;
++
++#ifdef SERIAL_DEBUG_PNP
++ printk("Entered probe_serial_pnp()\n");
++#endif
++ if (!isapnp_present()) {
++#ifdef SERIAL_DEBUG_PNP
++ printk("Leaving probe_serial_pnp() (no isapnp)\n");
++#endif
++ return;
++ }
++
++ isapnp_for_each_dev(dev) {
++ if (dev->active)
++ continue;
++
++ memset(&board, 0, sizeof(board));
++ board.flags = SPCI_FL_BASE0 | SPCI_FL_PNPDEFAULT;
++ board.num_ports = 1;
++ board.base_baud = 115200;
++
++ for (pnp_board = pnp_devices; pnp_board->vendor; pnp_board++)
++ if ((dev->vendor == pnp_board->vendor) &&
++ (dev->device == pnp_board->device))
++ break;
++
++ if (pnp_board->vendor) {
++ /* Special case that's more efficient to hardcode */
++ if ((pnp_board->vendor == ISAPNP_VENDOR('A', 'K', 'Y') &&
++ pnp_board->device == ISAPNP_DEVICE(0x1021)))
++ board.flags |= SPCI_FL_NO_SHIRQ;
++ } else {
++ if (serial_pnp_guess_board(dev, &board))
++ continue;
++ }
++
++ if (board.flags & SPCI_FL_NO_SHIRQ)
++ avoid_irq_share(dev);
++ start_pci_pnp_board(dev, &board);
++ }
++
++#ifdef SERIAL_DEBUG_PNP
++ printk("Leaving probe_serial_pnp() (probe finished)\n");
++#endif
++ return;
++}
++
++#endif /* ENABLE_SERIAL_PNP */
++
++/*
++ * The serial driver boot-time initialization code!
++ */
++static int __init rs_init(void)
++{
++ int i;
++ struct serial_state * state;
++
++ init_bh(SERIAL_BH, do_serial_bh);
++ init_timer(&serial_timer);
++ serial_timer.function = rs_timer;
++ mod_timer(&serial_timer, jiffies + RS_STROBE_TIME);
++
++ for (i = 0; i < NR_IRQS; i++) {
++ IRQ_ports[i] = 0;
++ IRQ_timeout[i] = 0;
++#ifdef CONFIG_SERIAL_MULTIPORT
++ memset(&rs_multiport[i], 0,
++ sizeof(struct rs_multiport_struct));
++#endif
++ }
++ show_serial_version();
++
++ /* Initialize the tty_driver structure */
++
++ memset(&serial_driver, 0, sizeof(struct tty_driver));
++ serial_driver.magic = TTY_DRIVER_MAGIC;
++#if (LINUX_VERSION_CODE > 0x20100)
++ serial_driver.driver_name = "serial";
++#endif
++#if (LINUX_VERSION_CODE > 0x2032D && defined(CONFIG_DEVFS_FS))
++ serial_driver.name = "tts/%d";
++#else
++ serial_driver.name = "ttyS";
++#endif
++ serial_driver.major = TTY_MAJOR;
++ serial_driver.minor_start = 64 + SERIAL_DEV_OFFSET;
++ serial_driver.name_base = SERIAL_DEV_OFFSET;
++ serial_driver.num = NR_PORTS;
++ serial_driver.type = TTY_DRIVER_TYPE_SERIAL;
++ serial_driver.subtype = SERIAL_TYPE_NORMAL;
++ serial_driver.init_termios = tty_std_termios;
++ serial_driver.init_termios.c_cflag =
++ B9600 | CS8 | CREAD | HUPCL | CLOCAL;
++ serial_driver.flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_NO_DEVFS;
++ serial_driver.refcount = &serial_refcount;
++ serial_driver.table = serial_table;
++ serial_driver.termios = serial_termios;
++ serial_driver.termios_locked = serial_termios_locked;
++
++ serial_driver.open = rs_open;
++ serial_driver.close = rs_close;
++ serial_driver.write = rs_write;
++ serial_driver.put_char = rs_put_char;
++ serial_driver.flush_chars = rs_flush_chars;
++ serial_driver.write_room = rs_write_room;
++ serial_driver.chars_in_buffer = rs_chars_in_buffer;
++ serial_driver.flush_buffer = rs_flush_buffer;
++ serial_driver.ioctl = rs_ioctl;
++ serial_driver.throttle = rs_throttle;
++ serial_driver.unthrottle = rs_unthrottle;
++ serial_driver.set_termios = rs_set_termios;
++ serial_driver.stop = rs_stop;
++ serial_driver.start = rs_start;
++ serial_driver.hangup = rs_hangup;
++#if (LINUX_VERSION_CODE >= 131394) /* Linux 2.1.66 */
++ serial_driver.break_ctl = rs_break;
++#endif
++#if (LINUX_VERSION_CODE >= 131343)
++ serial_driver.send_xchar = rs_send_xchar;
++ serial_driver.wait_until_sent = rs_wait_until_sent;
++ serial_driver.read_proc = rs_read_proc;
++#endif
++
++ /*
++ * The callout device is just like normal device except for
++ * major number and the subtype code.
++ */
++ callout_driver = serial_driver;
++#if (LINUX_VERSION_CODE > 0x2032D && defined(CONFIG_DEVFS_FS))
++ callout_driver.name = "cua/%d";
++#else
++ callout_driver.name = "cua";
++#endif
++ callout_driver.major = TTYAUX_MAJOR;
++ callout_driver.subtype = SERIAL_TYPE_CALLOUT;
++#if (LINUX_VERSION_CODE >= 131343)
++ callout_driver.read_proc = 0;
++ callout_driver.proc_entry = 0;
++#endif
++
++ if (tty_register_driver(&serial_driver))
++ panic("Couldn't register serial driver\n");
++ if (tty_register_driver(&callout_driver))
++ panic("Couldn't register callout driver\n");
++
++ for (i = 0, state = rs_table; i < NR_PORTS; i++,state++) {
++ state->magic = SSTATE_MAGIC;
++ state->line = i;
++ state->type = PORT_UNKNOWN;
++ state->custom_divisor = 0;
++ state->close_delay = 5*HZ/10;
++ state->closing_wait = 30*HZ;
++ state->callout_termios = callout_driver.init_termios;
++ state->normal_termios = serial_driver.init_termios;
++ state->icount.cts = state->icount.dsr =
++ state->icount.rng = state->icount.dcd = 0;
++ state->icount.rx = state->icount.tx = 0;
++ state->icount.frame = state->icount.parity = 0;
++ state->icount.overrun = state->icount.brk = 0;
++ state->irq = irq_cannonicalize(state->irq);
++ if (state->hub6)
++ state->io_type = SERIAL_IO_HUB6;
++ if (state->port && check_region(state->port,8))
++ continue;
++#ifdef CONFIG_MCA
++ if ((state->flags & ASYNC_BOOT_ONLYMCA) && !MCA_bus)
++ continue;
++#endif
++ if (state->flags & ASYNC_BOOT_AUTOCONF)
++ autoconfig(state);
++ }
++ for (i = 0, state = rs_table; i < NR_PORTS; i++,state++) {
++ if (state->type == PORT_UNKNOWN)
++ continue;
++ if ( (state->flags & ASYNC_BOOT_AUTOCONF)
++ && (state->flags & ASYNC_AUTO_IRQ)
++ && (state->port != 0 || state->iomem_base != 0))
++ state->irq = detect_uart_irq(state);
++ if (state->io_type == SERIAL_IO_MEM) {
++ printk(KERN_INFO"ttyS%02d%s at 0x%p (irq = %d) is a %s\n",
++ state->line + SERIAL_DEV_OFFSET,
++ (state->flags & ASYNC_FOURPORT) ? " FourPort" : "",
++ state->iomem_base, state->irq,
++ uart_config[state->type].name);
++ }
++ else {
++ printk(KERN_INFO "ttyS%02d%s at 0x%04lx (irq = %d) is a %s\n",
++ state->line + SERIAL_DEV_OFFSET,
++ (state->flags & ASYNC_FOURPORT) ? " FourPort" : "",
++ state->port, state->irq,
++ uart_config[state->type].name);
++ }
++ tty_register_devfs(&serial_driver, 0,
++ serial_driver.minor_start + state->line);
++ tty_register_devfs(&callout_driver, 0,
++ callout_driver.minor_start + state->line);
++ }
++#ifdef ENABLE_SERIAL_PCI
++ probe_serial_pci();
++#endif
++#ifdef ENABLE_SERIAL_PNP
++ probe_serial_pnp();
++#endif
++ return 0;
++}
++
++/*
++ * This is for use by architectures that know their serial console
++ * attributes only at run time. Not to be invoked after rs_init().
++ */
++int __init early_serial_setup(struct serial_struct *req)
++{
++ int i = req->line;
++
++ if (i >= NR_IRQS)
++ return(-ENOENT);
++ rs_table[i].magic = 0;
++ rs_table[i].baud_base = req->baud_base;
++ rs_table[i].port = req->port;
++ if (HIGH_BITS_OFFSET)
++ rs_table[i].port += (unsigned long) req->port_high <<
++ HIGH_BITS_OFFSET;
++ rs_table[i].irq = req->irq;
++ rs_table[i].flags = req->flags;
++ rs_table[i].close_delay = req->close_delay;
++ rs_table[i].io_type = req->io_type;
++ rs_table[i].hub6 = req->hub6;
++ rs_table[i].iomem_base = req->iomem_base;
++ rs_table[i].iomem_reg_shift = req->iomem_reg_shift;
++ rs_table[i].type = req->type;
++ rs_table[i].xmit_fifo_size = req->xmit_fifo_size;
++ rs_table[i].custom_divisor = req->custom_divisor;
++ rs_table[i].closing_wait = req->closing_wait;
++ return(0);
++}
++
++/*
++ * register_serial and unregister_serial allows for 16x50 serial ports to be
++ * configured at run-time, to support PCMCIA modems.
++ */
++
++/**
++ * register_serial - configure a 16x50 serial port at runtime
++ * @req: request structure
++ *
++ * Configure the serial port specified by the request. If the
++ * port exists and is in use an error is returned. If the port
++ * is not currently in the table it is added.
++ *
++ * The port is then probed and if neccessary the IRQ is autodetected
++ * If this fails an error is returned.
++ *
++ * On success the port is ready to use and the line number is returned.
++ */
++
++int register_serial(struct serial_struct *req)
++{
++ int i;
++ unsigned long flags;
++ struct serial_state *state;
++ struct async_struct *info;
++ unsigned long port;
++
++ port = req->port;
++ if (HIGH_BITS_OFFSET)
++ port += (unsigned long) req->port_high << HIGH_BITS_OFFSET;
++
++ save_flags(flags); cli();
++ for (i = 0; i < NR_PORTS; i++) {
++ if ((rs_table[i].port == port) &&
++ (rs_table[i].iomem_base == req->iomem_base))
++ break;
++ }
++#ifdef __i386__
++ if (i == NR_PORTS) {
++ for (i = 4; i < NR_PORTS; i++)
++ if ((rs_table[i].type == PORT_UNKNOWN) &&
++ (rs_table[i].count == 0))
++ break;
++ }
++#endif
++ if (i == NR_PORTS) {
++ for (i = 0; i < NR_PORTS; i++)
++ if ((rs_table[i].type == PORT_UNKNOWN) &&
++ (rs_table[i].count == 0))
++ break;
++ }
++ if (i == NR_PORTS) {
++ restore_flags(flags);
++ return -1;
++ }
++ state = &rs_table[i];
++ if (rs_table[i].count) {
++ restore_flags(flags);
++ printk("Couldn't configure serial #%d (port=%ld,irq=%d): "
++ "device already open\n", i, port, req->irq);
++ return -1;
++ }
++ state->irq = req->irq;
++ state->port = port;
++ state->flags = req->flags;
++ state->io_type = req->io_type;
++ state->iomem_base = req->iomem_base;
++ state->iomem_reg_shift = req->iomem_reg_shift;
++ if (req->baud_base)
++ state->baud_base = req->baud_base;
++ if ((info = state->info) != NULL) {
++ info->port = port;
++ info->flags = req->flags;
++ info->io_type = req->io_type;
++ info->iomem_base = req->iomem_base;
++ info->iomem_reg_shift = req->iomem_reg_shift;
++ }
++ autoconfig(state);
++ if (state->type == PORT_UNKNOWN) {
++ restore_flags(flags);
++ printk("register_serial(): autoconfig failed\n");
++ return -1;
++ }
++ restore_flags(flags);
++
++ if ((state->flags & ASYNC_AUTO_IRQ) && CONFIGURED_SERIAL_PORT(state))
++ state->irq = detect_uart_irq(state);
++
++ printk(KERN_INFO "ttyS%02d at %s 0x%04lx (irq = %d) is a %s\n",
++ state->line + SERIAL_DEV_OFFSET,
++ state->iomem_base ? "iomem" : "port",
++ state->iomem_base ? (unsigned long)state->iomem_base :
++ state->port, state->irq, uart_config[state->type].name);
++ tty_register_devfs(&serial_driver, 0,
++ serial_driver.minor_start + state->line);
++ tty_register_devfs(&callout_driver, 0,
++ callout_driver.minor_start + state->line);
++ return state->line + SERIAL_DEV_OFFSET;
++}
++
++/**
++ * unregister_serial - deconfigure a 16x50 serial port
++ * @line: line to deconfigure
++ *
++ * The port specified is deconfigured and its resources are freed. Any
++ * user of the port is disconnected as if carrier was dropped. Line is
++ * the port number returned by register_serial().
++ */
++
++void unregister_serial(int line)
++{
++ unsigned long flags;
++ struct serial_state *state = &rs_table[line];
++
++ save_flags(flags); cli();
++ if (state->info && state->info->tty)
++ tty_hangup(state->info->tty);
++ state->type = PORT_UNKNOWN;
++ printk(KERN_INFO "ttyS%02d unloaded\n", state->line);
++ /* These will be hidden, because they are devices that will no longer
++ * be available to the system. (ie, PCMCIA modems, once ejected)
++ */
++ tty_unregister_devfs(&serial_driver,
++ serial_driver.minor_start + state->line);
++ tty_unregister_devfs(&callout_driver,
++ callout_driver.minor_start + state->line);
++ restore_flags(flags);
++}
++
++static void __exit rs_fini(void)
++{
++ unsigned long flags;
++ int e1, e2;
++ int i;
++ struct async_struct *info;
++
++ /* printk("Unloading %s: version %s\n", serial_name, serial_version); */
++ del_timer_sync(&serial_timer);
++ save_flags(flags); cli();
++ remove_bh(SERIAL_BH);
++ if ((e1 = tty_unregister_driver(&serial_driver)))
++ printk("serial: failed to unregister serial driver (%d)\n",
++ e1);
++ if ((e2 = tty_unregister_driver(&callout_driver)))
++ printk("serial: failed to unregister callout driver (%d)\n",
++ e2);
++ restore_flags(flags);
++
++ for (i = 0; i < NR_PORTS; i++) {
++ if ((info = rs_table[i].info)) {
++ rs_table[i].info = NULL;
++ kfree(info);
++ }
++ if ((rs_table[i].type != PORT_UNKNOWN) && rs_table[i].port) {
++#ifdef CONFIG_SERIAL_RSA
++ if (rs_table[i].type == PORT_RSA)
++ release_region(rs_table[i].port +
++ UART_RSA_BASE, 16);
++ else
++#endif
++ release_region(rs_table[i].port, 8);
++ }
++#if defined(ENABLE_SERIAL_PCI) || defined(ENABLE_SERIAL_PNP)
++ if (rs_table[i].iomem_base)
++ iounmap(rs_table[i].iomem_base);
++#endif
++ }
++#if defined(ENABLE_SERIAL_PCI) || defined(ENABLE_SERIAL_PNP)
++ for (i=0; i < NR_PCI_BOARDS; i++) {
++ struct pci_board_inst *brd = &serial_pci_board[i];
++
++ if (serial_pci_board[i].dev == 0)
++ continue;
++ if (brd->board.init_fn)
++ (brd->board.init_fn)(brd->dev, &brd->board, 0);
++ if (DEACTIVATE_FUNC(brd->dev))
++ (DEACTIVATE_FUNC(brd->dev))(brd->dev);
++ }
++#endif
++ if (tmp_buf) {
++ unsigned long pg = (unsigned long) tmp_buf;
++ tmp_buf = NULL;
++ free_page(pg);
++ }
++
++#ifdef ENABLE_SERIAL_PCI
++ if (serial_pci_driver.name[0])
++ pci_unregister_driver (&serial_pci_driver);
++#endif
++}
++
++module_init(rs_init);
++module_exit(rs_fini);
++MODULE_DESCRIPTION("Standard/generic (dumb) serial driver");
++MODULE_AUTHOR("Theodore Ts'o <tytso@mit.edu>");
++MODULE_LICENSE("GPL");
++
++
++/*
++ * ------------------------------------------------------------
++ * Serial console driver
++ * ------------------------------------------------------------
++ */
++#ifdef CONFIG_SERIAL_CONSOLE
++
++#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
++
++static struct async_struct async_sercons;
++
++/*
++ * Wait for transmitter & holding register to empty
++ */
++static inline void wait_for_xmitr(struct async_struct *info)
++{
++ unsigned int status, tmout = 1000000;
++
++ do {
++ status = serial_in(info, UART_LSR);
++
++ if (status & UART_LSR_BI)
++ lsr_break_flag = UART_LSR_BI;
++
++ if (--tmout == 0)
++ break;
++ } while((status & BOTH_EMPTY) != BOTH_EMPTY);
++
++ /* Wait for flow control if necessary */
++ if (info->flags & ASYNC_CONS_FLOW) {
++ tmout = 1000000;
++ while (--tmout &&
++ ((serial_in(info, UART_MSR) & UART_MSR_CTS) == 0));
++ }
++}
++
++
++/*
++ * Print a string to the serial port trying not to disturb
++ * any possible real use of the port...
++ *
++ * The console must be locked when we get here.
++ */
++static void serial_console_write(struct console *co, const char *s,
++ unsigned count)
++{
++ static struct async_struct *info = &async_sercons;
++ int ier;
++ unsigned i;
++
++ /*
++ * First save the IER then disable the interrupts
++ */
++ ier = serial_in(info, UART_IER);
++ serial_out(info, UART_IER, 0x00);
++
++ /*
++ * Now, do each character
++ */
++ for (i = 0; i < count; i++, s++) {
++ wait_for_xmitr(info);
++
++ /*
++ * Send the character out.
++ * If a LF, also do CR...
++ */
++ serial_out(info, UART_TX, *s);
++ if (*s == 10) {
++ wait_for_xmitr(info);
++ serial_out(info, UART_TX, 13);
++ }
++ }
++
++ /*
++ * Finally, Wait for transmitter & holding register to empty
++ * and restore the IER
++ */
++ wait_for_xmitr(info);
++ serial_out(info, UART_IER, ier);
++}
++
++static kdev_t serial_console_device(struct console *c)
++{
++ return MKDEV(TTY_MAJOR, 64 + c->index);
++}
++
++/*
++ * Setup initial baud/bits/parity/flow control. We do two things here:
++ * - construct a cflag setting for the first rs_open()
++ * - initialize the serial port
++ * Return non-zero if we didn't find a serial port.
++ */
++static int __init serial_console_setup(struct console *co, char *options)
++{
++ static struct async_struct *info;
++ struct serial_state *state;
++ unsigned cval;
++ int baud = 9600;
++ int bits = 8;
++ int parity = 'n';
++ int doflow = 0;
++ int cflag = CREAD | HUPCL | CLOCAL;
++ int quot = 0;
++ char *s;
++
++ if (options) {
++ baud = simple_strtoul(options, NULL, 10);
++ s = options;
++ while(*s >= '0' && *s <= '9')
++ s++;
++ if (*s) parity = *s++;
++ if (*s) bits = *s++ - '0';
++ if (*s) doflow = (*s++ == 'r');
++ }
++
++ /*
++ * Now construct a cflag setting.
++ */
++ switch(baud) {
++ case 1200:
++ cflag |= B1200;
++ break;
++ case 2400:
++ cflag |= B2400;
++ break;
++ case 4800:
++ cflag |= B4800;
++ break;
++ case 19200:
++ cflag |= B19200;
++ break;
++ case 38400:
++ cflag |= B38400;
++ break;
++ case 57600:
++ cflag |= B57600;
++ break;
++ case 115200:
++ cflag |= B115200;
++ break;
++ case 9600:
++ default:
++ cflag |= B9600;
++ /*
++ * Set this to a sane value to prevent a divide error
++ */
++ baud = 9600;
++ break;
++ }
++ switch(bits) {
++ case 7:
++ cflag |= CS7;
++ break;
++ default:
++ case 8:
++ cflag |= CS8;
++ break;
++ }
++ switch(parity) {
++ case 'o': case 'O':
++ cflag |= PARODD;
++ break;
++ case 'e': case 'E':
++ cflag |= PARENB;
++ break;
++ }
++ co->cflag = cflag;
++
++ /*
++ * Divisor, bytesize and parity
++ */
++ state = rs_table + co->index;
++ if (doflow)
++ state->flags |= ASYNC_CONS_FLOW;
++ info = &async_sercons;
++ info->magic = SERIAL_MAGIC;
++ info->state = state;
++ info->port = state->port;
++ info->flags = state->flags;
++#ifdef CONFIG_HUB6
++ info->hub6 = state->hub6;
++#endif
++ info->io_type = state->io_type;
++ info->iomem_base = state->iomem_base;
++ info->iomem_reg_shift = state->iomem_reg_shift;
++ quot = state->baud_base / baud;
++ cval = cflag & (CSIZE | CSTOPB);
++#if defined(__powerpc__) || defined(__alpha__)
++ cval >>= 8;
++#else /* !__powerpc__ && !__alpha__ */
++ cval >>= 4;
++#endif /* !__powerpc__ && !__alpha__ */
++ if (cflag & PARENB)
++ cval |= UART_LCR_PARITY;
++ if (!(cflag & PARODD))
++ cval |= UART_LCR_EPAR;
++
++ /*
++ * Disable UART interrupts, set DTR and RTS high
++ * and set speed.
++ */
++ serial_out(info, UART_LCR, cval | UART_LCR_DLAB); /* set DLAB */
++ serial_out(info, UART_DLL, quot & 0xff); /* LS of divisor */
++ serial_out(info, UART_DLM, quot >> 8); /* MS of divisor */
++ serial_out(info, UART_LCR, cval); /* reset DLAB */
++ serial_out(info, UART_IER, 0);
++ serial_out(info, UART_MCR, UART_MCR_DTR | UART_MCR_RTS);
++
++ /*
++ * If we read 0xff from the LSR, there is no UART here.
++ */
++ if (serial_in(info, UART_LSR) == 0xff)
++ return -1;
++
++ return 0;
++}
++
++static struct console sercons = {
++ name: "ttyS",
++ write: serial_console_write,
++ device: serial_console_device,
++ setup: serial_console_setup,
++ flags: CON_PRINTBUFFER,
++ index: -1,
++};
++
++/*
++ * Register console.
++ */
++void __init serial_console_init(void)
++{
++ register_console(&sercons);
++}
++#endif
++
++/*
++ Local variables:
++ compile-command: "gcc -D__KERNEL__ -I../../include -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -fno-strict-aliasing -pipe -fno-strength-reduce -march=i586 -DMODULE -DMODVERSIONS -include ../../include/linux/modversions.h -DEXPORT_SYMTAB -c serial.c"
++ End:
++*/
+diff -urN linux.old/drivers/char/ticfg/Makefile linux.dev/drivers/char/ticfg/Makefile
+--- linux.old/drivers/char/ticfg/Makefile 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/char/ticfg/Makefile 2005-11-10 01:10:46.051587500 +0100
+@@ -0,0 +1,6 @@
++
++O_TARGET := ticfg.o
++
++obj-$(CONFIG_AR7_ADAM2) := adam2_env.o
++
++include $(TOPDIR)/Rules.make
+diff -urN linux.old/drivers/char/ticfg/adam2_env.c linux.dev/drivers/char/ticfg/adam2_env.c
+--- linux.old/drivers/char/ticfg/adam2_env.c 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/drivers/char/ticfg/adam2_env.c 2005-11-10 01:10:46.051587500 +0100
+@@ -0,0 +1,85 @@
++#include <linux/types.h>
++#include <linux/errno.h>
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/proc_fs.h>
++#include <linux/fcntl.h>
++#include <linux/init.h>
++
++#include <asm/ar7/adam2_env.h>
++
++#undef ADAM2_ENV_DEBUG
++
++#ifdef ADAM2_ENV_DEBUG
++#define DPRINTK(args...) do { printk(args); } while(0);
++#else
++#define DPRINTK(args...) do { } while(0);
++#endif
++
++#define ADAM2_ENV_DIR "ticfg"
++#define ADAM2_ENV_NAME "env"
++
++static struct proc_dir_entry *adam2_env_proc_dir;
++static struct proc_dir_entry *adam2_env_proc_ent;
++
++static int
++adam2_proc_read_env(char *page, char **start, off_t pos, int count,
++ int *eof, void *data)
++{
++ int len;
++ t_env_var *env;
++
++ if (pos > 0)
++ return 0;
++
++ len=0;
++ for (env = prom_iterenv(0); env; env = prom_iterenv(env)) {
++ if (env->val) {
++ /* XXX check for page len */
++ len += sprintf(page + len, "%s\t%s\n",
++ env->name, env->val);
++ }
++ }
++
++ *eof=1;
++ return len;
++}
++
++static int __init
++adam2_env_init(void)
++{
++
++ DPRINTK("%s\n", __FUNCTION__);
++
++ adam2_env_proc_dir = proc_mkdir(ADAM2_ENV_DIR, NULL);
++ if (!adam2_env_proc_dir) {
++ printk(KERN_ERR "%s: Unable to create /proc/%s entry\n",
++ __FUNCTION__, ADAM2_ENV_DIR);
++ return -ENOMEM;
++ }
++
++ adam2_env_proc_ent =
++ create_proc_entry(ADAM2_ENV_NAME, 0444, adam2_env_proc_dir);
++ if (!adam2_env_proc_ent) {
++ printk(KERN_ERR "%s: Unable to create /proc/%s/%s entry\n",
++ __FUNCTION__, ADAM2_ENV_DIR, ADAM2_ENV_NAME);
++ remove_proc_entry(ADAM2_ENV_DIR, NULL);
++ return -ENOMEM;
++ }
++ adam2_env_proc_ent->read_proc = adam2_proc_read_env;
++
++ return 0;
++}
++
++static
++void __exit
++adam2_env_cleanup(void)
++{
++ remove_proc_entry(ADAM2_ENV_NAME, adam2_env_proc_dir);
++ remove_proc_entry(ADAM2_ENV_DIR, NULL);
++}
++
++module_init(adam2_env_init);
++module_exit(adam2_env_cleanup);
++
++MODULE_LICENSE("GPL");
+diff -urN linux.old/include/asm-mips/addrspace.h linux.dev/include/asm-mips/addrspace.h
+--- linux.old/include/asm-mips/addrspace.h 2002-11-29 00:53:15.000000000 +0100
++++ linux.dev/include/asm-mips/addrspace.h 2005-11-10 01:14:16.400733500 +0100
+@@ -11,6 +11,8 @@
+ #ifndef __ASM_MIPS_ADDRSPACE_H
+ #define __ASM_MIPS_ADDRSPACE_H
+
++#include <linux/config.h>
++
+ /*
+ * Configure language
+ */
+@@ -102,4 +104,11 @@
+ #define XKPHYS_TO_PHYS(p) ((p) & TO_PHYS_MASK)
+ #define PHYS_TO_XKPHYS(cm,a) (0x8000000000000000 | ((cm)<<59) | (a))
+
++#ifdef CONFIG_AR7_MEMORY
++#define PHYS_OFFSET ((unsigned long)(CONFIG_AR7_MEMORY))
++#else
++#define PHYS_OFFSET (0)
++#endif
++#define PHYS_PFN_OFFSET (PHYS_OFFSET >> PAGE_SHIFT)
++
+ #endif /* __ASM_MIPS_ADDRSPACE_H */
+diff -urN linux.old/include/asm-mips/ar7/adam2_env.h linux.dev/include/asm-mips/ar7/adam2_env.h
+--- linux.old/include/asm-mips/ar7/adam2_env.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/include/asm-mips/ar7/adam2_env.h 2005-11-10 01:10:46.067588500 +0100
+@@ -0,0 +1,13 @@
++#ifndef _INCLUDE_ASM_AR7_ADAM2_ENV_H_
++#define _INCLUDE_ASM_AR7_ADAM2_ENV_H_
++
++/* Environment variable */
++typedef struct {
++ char *name;
++ char *val;
++} t_env_var;
++
++char *prom_getenv(char *);
++t_env_var *prom_iterenv(t_env_var *);
++
++#endif /* _INCLUDE_ASM_AR7_ADAM2_ENV_H_ */
+diff -urN linux.old/include/asm-mips/ar7/ar7.h linux.dev/include/asm-mips/ar7/ar7.h
+--- linux.old/include/asm-mips/ar7/ar7.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/include/asm-mips/ar7/ar7.h 2005-11-10 01:10:46.067588500 +0100
+@@ -0,0 +1,33 @@
++/*
++ * $Id$
++ * Copyright (C) $Date$ $Author$
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
++ *
++ */
++
++#ifndef _AR7_H
++#define _AR7_H
++
++#include <asm/addrspace.h>
++#include <linux/config.h>
++
++#define AVALANCHE_VECS_KSEG0 (KSEG0ADDR(CONFIG_AR7_MEMORY))
++
++#define AR7_UART0_REGS_BASE (KSEG1ADDR(0x08610E00))
++#define AR7_UART1_REGS_BASE (KSEG1ADDR(0x08610F00))
++#define AR7_BASE_BAUD ( 3686400 / 16 )
++
++#endif
+diff -urN linux.old/include/asm-mips/ar7/avalanche_intc.h linux.dev/include/asm-mips/ar7/avalanche_intc.h
+--- linux.old/include/asm-mips/ar7/avalanche_intc.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/include/asm-mips/ar7/avalanche_intc.h 2005-11-10 01:10:46.067588500 +0100
+@@ -0,0 +1,292 @@
++ /*
++ * Nitin Dhingra, iamnd@ti.com
++ * Copyright (C) 2000 Texas Instruments Inc.
++ *
++ *
++ * ########################################################################
++ *
++ * This program is free software; you can distribute it and/or modify it
++ * under the terms of the GNU General Public License (Version 2) as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ * for more details.
++ *
++ * You should have received a copy of the GNU General Public License along
++ * with this program; if not, write to the Free Software Foundation, Inc.,
++ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++ *
++ * ########################################################################
++ *
++ * Defines of the Sead board specific address-MAP, registers, etc.
++ *
++ */
++#ifndef _AVALANCHE_INTC_H
++#define _AVALANCHE_INTC_H
++
++#include <linux/config.h>
++
++/* ----- */
++
++#define KSEG1_BASE 0xA0000000
++#define KSEG_INV_MASK 0x1FFFFFFF /* Inverted mask for kseg address */
++#define PHYS_ADDR(addr) ((addr) & KSEG_INV_MASK)
++#define PHYS_TO_K1(addr) (PHYS_ADDR(addr)|KSEG1_BASE)
++#define AVALANCHE_INTC_BASE PHYS_TO_K1(0x08612400)
++
++/* ----- */
++
++#define MIPS_EXCEPTION_OFFSET 8
++
++/******************************************************************************
++ Avalanche Interrupt number
++******************************************************************************/
++#define AVINTNUM(x) ((x) - MIPS_EXCEPTION_OFFSET)
++
++/*******************************************************************************
++*Linux Interrupt number
++*******************************************************************************/
++#define LNXINTNUM(x)((x) + MIPS_EXCEPTION_OFFSET)
++
++
++
++#define AVALANCHE_INT_END_PRIMARY (40 + MIPS_EXCEPTION_OFFSET)
++#define AVALANCHE_INT_END_SECONDARY (32 + MIPS_EXCEPTION_OFFSET)
++
++#define AVALANCHE_INT_END_PRIMARY_REG1 (31 + MIPS_EXCEPTION_OFFSET)
++#define AVALANCHE_INT_END_PRIMARY_REG2 (39 + MIPS_EXCEPTION_OFFSET)
++
++#define AVALANCHE_INTC_END (AVINTNUM(AVALANCHE_INT_END_PRIMARY) + \
++ AVINTNUM(AVALANCHE_INT_END_SECONDARY) + \
++ MIPS_EXCEPTION_OFFSET)
++
++#if defined(CONFIG_AR7_VLYNQ)
++#define AVALANCHE_INT_END_LOW_VLYNQ (AVALANCHE_INTC_END + 32)
++#define AVALANCHE_INT_END_VLYNQ (AVALANCHE_INTC_END + 32 * CONFIG_AR7_VLYNQ_PORTS)
++#define AVALANCHE_INT_END AVALANCHE_INT_END_VLYNQ
++#else
++#define AVALANCHE_INT_END AVALANCHE_INTC_END
++#endif
++
++
++/*
++ * Avalanche interrupt controller register base (primary)
++ */
++#define AVALANCHE_ICTRL_REGS_BASE AVALANCHE_INTC_BASE
++
++/******************************************************************************
++ * Avalanche exception controller register base (secondary)
++ ******************************************************************************/
++#define AVALANCHE_ECTRL_REGS_BASE (AVALANCHE_ICTRL_REGS_BASE + 0x80)
++
++
++/******************************************************************************
++ * Avalanche Interrupt pacing register base (secondary)
++ ******************************************************************************/
++#define AVALANCHE_IPACE_REGS_BASE (AVALANCHE_ICTRL_REGS_BASE + 0xA0)
++
++
++
++/******************************************************************************
++ * Avalanche Interrupt Channel Control register base
++ *****************************************************************************/
++#define AVALANCHE_CHCTRL_REGS_BASE (AVALANCHE_ICTRL_REGS_BASE + 0x200)
++
++
++struct avalanche_ictrl_regs /* Avalanche Interrupt control registers */
++{
++ volatile unsigned long intsr1; /* Interrupt Status/Set Register 1 0x00 */
++ volatile unsigned long intsr2; /* Interrupt Status/Set Register 2 0x04 */
++ volatile unsigned long unused1; /*0x08 */
++ volatile unsigned long unused2; /*0x0C */
++ volatile unsigned long intcr1; /* Interrupt Clear Register 1 0x10 */
++ volatile unsigned long intcr2; /* Interrupt Clear Register 2 0x14 */
++ volatile unsigned long unused3; /*0x18 */
++ volatile unsigned long unused4; /*0x1C */
++ volatile unsigned long intesr1; /* Interrupt Enable (Set) Register 1 0x20 */
++ volatile unsigned long intesr2; /* Interrupt Enable (Set) Register 2 0x24 */
++ volatile unsigned long unused5; /*0x28 */
++ volatile unsigned long unused6; /*0x2C */
++ volatile unsigned long intecr1; /* Interrupt Enable Clear Register 1 0x30 */
++ volatile unsigned long intecr2; /* Interrupt Enable Clear Register 2 0x34 */
++ volatile unsigned long unused7; /* 0x38 */
++ volatile unsigned long unused8; /* 0x3c */
++ volatile unsigned long pintir; /* Priority Interrupt Index Register 0x40 */
++ volatile unsigned long intmsr; /* Priority Interrupt Mask Index Reg 0x44 */
++ volatile unsigned long unused9; /* 0x48 */
++ volatile unsigned long unused10; /* 0x4C */
++ volatile unsigned long intpolr1; /* Interrupt Polarity Mask register 10x50 */
++ volatile unsigned long intpolr2; /* Interrupt Polarity Mask register 20x54 */
++ volatile unsigned long unused11; /* 0x58 */
++ volatile unsigned long unused12; /*0x5C */
++ volatile unsigned long inttypr1; /* Interrupt Type Mask register 10x60 */
++ volatile unsigned long inttypr2; /* Interrupt Type Mask register 20x64 */
++};
++
++struct avalanche_exctrl_regs /* Avalanche Exception control registers */
++{
++ volatile unsigned long exsr; /* Exceptions Status/Set register 0x80 */
++ volatile unsigned long reserved; /*0x84 */
++ volatile unsigned long excr; /* Exceptions Clear Register 0x88 */
++ volatile unsigned long reserved1; /*0x8c */
++ volatile unsigned long exiesr; /* Exceptions Interrupt Enable (set) 0x90 */
++ volatile unsigned long reserved2; /*0x94 */
++ volatile unsigned long exiecr; /* Exceptions Interrupt Enable(clear)0x98 */
++};
++struct avalanche_ipace_regs
++{
++
++ volatile unsigned long ipacep; /* Interrupt pacing register 0xa0 */
++ volatile unsigned long ipacemap; /*Interrupt Pacing Map Register 0xa4 */
++ volatile unsigned long ipacemax; /*Interrupt Pacing Max Register 0xa8 */
++};
++struct avalanche_channel_int_number
++{
++ volatile unsigned long cintnr0; /* Channel Interrupt Number Register0x200 */
++ volatile unsigned long cintnr1; /* Channel Interrupt Number Register0x204 */
++ volatile unsigned long cintnr2; /* Channel Interrupt Number Register0x208 */
++ volatile unsigned long cintnr3; /* Channel Interrupt Number Register0x20C */
++ volatile unsigned long cintnr4; /* Channel Interrupt Number Register0x210 */
++ volatile unsigned long cintnr5; /* Channel Interrupt Number Register0x214 */
++ volatile unsigned long cintnr6; /* Channel Interrupt Number Register0x218 */
++ volatile unsigned long cintnr7; /* Channel Interrupt Number Register0x21C */
++ volatile unsigned long cintnr8; /* Channel Interrupt Number Register0x220 */
++ volatile unsigned long cintnr9; /* Channel Interrupt Number Register0x224 */
++ volatile unsigned long cintnr10; /* Channel Interrupt Number Register0x228 */
++ volatile unsigned long cintnr11; /* Channel Interrupt Number Register0x22C */
++ volatile unsigned long cintnr12; /* Channel Interrupt Number Register0x230 */
++ volatile unsigned long cintnr13; /* Channel Interrupt Number Register0x234 */
++ volatile unsigned long cintnr14; /* Channel Interrupt Number Register0x238 */
++ volatile unsigned long cintnr15; /* Channel Interrupt Number Register0x23C */
++ volatile unsigned long cintnr16; /* Channel Interrupt Number Register0x240 */
++ volatile unsigned long cintnr17; /* Channel Interrupt Number Register0x244 */
++ volatile unsigned long cintnr18; /* Channel Interrupt Number Register0x248 */
++ volatile unsigned long cintnr19; /* Channel Interrupt Number Register0x24C */
++ volatile unsigned long cintnr20; /* Channel Interrupt Number Register0x250 */
++ volatile unsigned long cintnr21; /* Channel Interrupt Number Register0x254 */
++ volatile unsigned long cintnr22; /* Channel Interrupt Number Register0x358 */
++ volatile unsigned long cintnr23; /* Channel Interrupt Number Register0x35C */
++ volatile unsigned long cintnr24; /* Channel Interrupt Number Register0x260 */
++ volatile unsigned long cintnr25; /* Channel Interrupt Number Register0x264 */
++ volatile unsigned long cintnr26; /* Channel Interrupt Number Register0x268 */
++ volatile unsigned long cintnr27; /* Channel Interrupt Number Register0x26C */
++ volatile unsigned long cintnr28; /* Channel Interrupt Number Register0x270 */
++ volatile unsigned long cintnr29; /* Channel Interrupt Number Register0x274 */
++ volatile unsigned long cintnr30; /* Channel Interrupt Number Register0x278 */
++ volatile unsigned long cintnr31; /* Channel Interrupt Number Register0x27C */
++ volatile unsigned long cintnr32; /* Channel Interrupt Number Register0x280 */
++ volatile unsigned long cintnr33; /* Channel Interrupt Number Register0x284 */
++ volatile unsigned long cintnr34; /* Channel Interrupt Number Register0x288 */
++ volatile unsigned long cintnr35; /* Channel Interrupt Number Register0x28C */
++ volatile unsigned long cintnr36; /* Channel Interrupt Number Register0x290 */
++ volatile unsigned long cintnr37; /* Channel Interrupt Number Register0x294 */
++ volatile unsigned long cintnr38; /* Channel Interrupt Number Register0x298 */
++ volatile unsigned long cintnr39; /* Channel Interrupt Number Register0x29C */
++};
++
++struct avalanche_interrupt_line_to_channel
++{
++ unsigned long int_line0; /* Start of primary interrupts */
++ unsigned long int_line1;
++ unsigned long int_line2;
++ unsigned long int_line3;
++ unsigned long int_line4;
++ unsigned long int_line5;
++ unsigned long int_line6;
++ unsigned long int_line7;
++ unsigned long int_line8;
++ unsigned long int_line9;
++ unsigned long int_line10;
++ unsigned long int_line11;
++ unsigned long int_line12;
++ unsigned long int_line13;
++ unsigned long int_line14;
++ unsigned long int_line15;
++ unsigned long int_line16;
++ unsigned long int_line17;
++ unsigned long int_line18;
++ unsigned long int_line19;
++ unsigned long int_line20;
++ unsigned long int_line21;
++ unsigned long int_line22;
++ unsigned long int_line23;
++ unsigned long int_line24;
++ unsigned long int_line25;
++ unsigned long int_line26;
++ unsigned long int_line27;
++ unsigned long int_line28;
++ unsigned long int_line29;
++ unsigned long int_line30;
++ unsigned long int_line31;
++ unsigned long int_line32;
++ unsigned long int_line33;
++ unsigned long int_line34;
++ unsigned long int_line35;
++ unsigned long int_line36;
++ unsigned long int_line37;
++ unsigned long int_line38;
++ unsigned long int_line39;
++};
++
++
++/* Interrupt Line #'s (Sangam peripherals) */
++
++/*------------------------------*/
++/* Sangam primary interrupts */
++/*------------------------------*/
++
++#define UNIFIED_SECONDARY_INTERRUPT 0
++#define AVALANCHE_EXT_INT_0 1
++#define AVALANCHE_EXT_INT_1 2
++/* Line #3 Reserved */
++/* Line #4 Reserved */
++#define AVALANCHE_TIMER_0_INT 5
++#define AVALANCHE_TIMER_1_INT 6
++#define AVALANCHE_UART0_INT 7
++#define AVALANCHE_UART1_INT 8
++#define AVALANCHE_PDMA_INT0 9
++#define AVALANCHE_PDMA_INT1 10
++/* Line #11 Reserved */
++/* Line #12 Reserved */
++/* Line #13 Reserved */
++/* Line #14 Reserved */
++#define AVALANCHE_ATM_SAR_INT 15
++/* Line #16 Reserved */
++/* Line #17 Reserved */
++/* Line #18 Reserved */
++#define AVALANCHE_MAC0_INT 19
++/* Line #20 Reserved */
++#define AVALANCHE_VLYNQ0_INT 21
++#define AVALANCHE_CODEC_WAKE_INT 22
++/* Line #23 Reserved */
++#define AVALANCHE_USB_INT 24
++#define AVALANCHE_VLYNQ1_INT 25
++/* Line #26 Reserved */
++/* Line #27 Reserved */
++#define AVALANCHE_MAC1_INT 28
++#define AVALANCHE_I2CM_INT 29
++#define AVALANCHE_PDMA_INT2 30
++#define AVALANCHE_PDMA_INT3 31
++/* Line #32 Reserved */
++/* Line #33 Reserved */
++/* Line #34 Reserved */
++/* Line #35 Reserved */
++/* Line #36 Reserved */
++#define AVALANCHE_VDMA_VT_RX_INT 37
++#define AVALANCHE_VDMA_VT_TX_INT 38
++#define AVALANCHE_ADSLSS_INT 39
++
++/*-----------------------------------*/
++/* Sangam Secondary Interrupts */
++/*-----------------------------------*/
++#define PRIMARY_INTS 40
++
++#define EMIF_INT (7 + PRIMARY_INTS)
++
++
++extern void avalanche_int_set(int channel, int line);
++
++
++#endif /* _AVALANCHE_INTC_H */
+diff -urN linux.old/include/asm-mips/ar7/avalanche_misc.h linux.dev/include/asm-mips/ar7/avalanche_misc.h
+--- linux.old/include/asm-mips/ar7/avalanche_misc.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/include/asm-mips/ar7/avalanche_misc.h 2005-11-10 01:10:46.067588500 +0100
+@@ -0,0 +1,174 @@
++#ifndef _AVALANCHE_MISC_H_
++#define _AVALANCHE_MISC_H_
++
++typedef enum AVALANCHE_ERR_t
++{
++ AVALANCHE_ERR_OK = 0, /* OK or SUCCESS */
++ AVALANCHE_ERR_ERROR = -1, /* Unspecified/Generic ERROR */
++
++ /* Pointers and args */
++ AVALANCHE_ERR_INVARG = -2, /* Invaild argument to the call */
++ AVALANCHE_ERR_NULLPTR = -3, /* NULL pointer */
++ AVALANCHE_ERR_BADPTR = -4, /* Bad (out of mem) pointer */
++
++ /* Memory issues */
++ AVALANCHE_ERR_ALLOC_FAIL = -10, /* allocation failed */
++ AVALANCHE_ERR_FREE_FAIL = -11, /* free failed */
++ AVALANCHE_ERR_MEM_CORRUPT = -12, /* corrupted memory */
++ AVALANCHE_ERR_BUF_LINK = -13, /* buffer linking failed */
++
++ /* Device issues */
++ AVALANCHE_ERR_DEVICE_TIMEOUT = -20, /* device timeout on read/write */
++ AVALANCHE_ERR_DEVICE_MALFUNC = -21, /* device malfunction */
++
++ AVALANCHE_ERR_INVID = -30 /* Invalid ID */
++
++} AVALANCHE_ERR;
++
++/*****************************************************************************
++ * Reset Control Module
++ *****************************************************************************/
++
++typedef enum AVALANCHE_RESET_MODULE_tag
++{
++ RESET_MODULE_UART0 = 0,
++ RESET_MODULE_UART1 = 1,
++ RESET_MODULE_I2C = 2,
++ RESET_MODULE_TIMER0 = 3,
++ RESET_MODULE_TIMER1 = 4,
++ RESET_MODULE_GPIO = 6,
++ RESET_MODULE_ADSLSS = 7,
++ RESET_MODULE_USBS = 8,
++ RESET_MODULE_SAR = 9,
++ RESET_MODULE_VDMA_VT = 11,
++ RESET_MODULE_FSER = 12,
++ RESET_MODULE_VLYNQ1 = 16,
++ RESET_MODULE_EMAC0 = 17,
++ RESET_MODULE_DMA = 18,
++ RESET_MODULE_BIST = 19,
++ RESET_MODULE_VLYNQ0 = 20,
++ RESET_MODULE_EMAC1 = 21,
++ RESET_MODULE_MDIO = 22,
++ RESET_MODULE_ADSLSS_DSP = 23,
++ RESET_MODULE_EPHY = 26
++} AVALANCHE_RESET_MODULE_T;
++
++typedef enum AVALANCHE_RESET_CTRL_tag
++{
++ IN_RESET = 0,
++ OUT_OF_RESET
++} AVALANCHE_RESET_CTRL_T;
++
++typedef enum AVALANCHE_SYS_RST_MODE_tag
++{
++ RESET_SOC_WITH_MEMCTRL = 1, /* SW0 bit in SWRCR register */
++ RESET_SOC_WITHOUT_MEMCTRL = 2 /* SW1 bit in SWRCR register */
++} AVALANCHE_SYS_RST_MODE_T;
++
++typedef enum AVALANCHE_SYS_RESET_STATUS_tag
++{
++ HARDWARE_RESET = 0,
++ SOFTWARE_RESET0, /* Caused by writing 1 to SW0 bit in SWRCR register */
++ WATCHDOG_RESET,
++ SOFTWARE_RESET1 /* Caused by writing 1 to SW1 bit in SWRCR register */
++} AVALANCHE_SYS_RESET_STATUS_T;
++
++AVALANCHE_RESET_CTRL_T avalanche_get_reset_status(AVALANCHE_RESET_MODULE_T reset_module);
++void avalanche_sys_reset(AVALANCHE_SYS_RST_MODE_T mode);
++AVALANCHE_SYS_RESET_STATUS_T avalanche_get_sys_last_reset_status(void);
++
++typedef int (*REMOTE_VLYNQ_DEV_RESET_CTRL_FN)(unsigned int reset_module, AVALANCHE_RESET_CTRL_T reset_ctrl);
++
++/*****************************************************************************
++ * Power Control Module
++ *****************************************************************************/
++
++typedef enum AVALANCHE_POWER_CTRL_tag
++{
++ POWER_CTRL_POWER_UP = 0,
++ POWER_CTRL_POWER_DOWN
++} AVALANCHE_POWER_CTRL_T;
++
++typedef enum AVALANCHE_SYS_POWER_MODE_tag
++{
++ GLOBAL_POWER_MODE_RUN = 0, /* All system is up */
++ GLOBAL_POWER_MODE_IDLE, /* MIPS is power down, all peripherals working */
++ GLOBAL_POWER_MODE_STANDBY, /* Chip in power down, but clock to ADSKL subsystem is running */
++ GLOBAL_POWER_MODE_POWER_DOWN /* Total chip is powered down */
++} AVALANCHE_SYS_POWER_MODE_T;
++
++void avalanche_power_ctrl(unsigned int power_module, AVALANCHE_POWER_CTRL_T power_ctrl);
++AVALANCHE_POWER_CTRL_T avalanche_get_power_status(unsigned int power_module);
++void avalanche_set_global_power_mode(AVALANCHE_SYS_POWER_MODE_T power_mode);
++AVALANCHE_SYS_POWER_MODE_T avalanche_get_global_power_mode(void);
++
++/*****************************************************************************
++ * Wakeup Control
++ *****************************************************************************/
++
++typedef enum AVALANCHE_WAKEUP_INTERRUPT_tag
++{
++ WAKEUP_INT0 = 1,
++ WAKEUP_INT1 = 2,
++ WAKEUP_INT2 = 4,
++ WAKEUP_INT3 = 8
++} AVALANCHE_WAKEUP_INTERRUPT_T;
++
++typedef enum TNETV1050_WAKEUP_CTRL_tag
++{
++ WAKEUP_DISABLED = 0,
++ WAKEUP_ENABLED
++} AVALANCHE_WAKEUP_CTRL_T;
++
++typedef enum TNETV1050_WAKEUP_POLARITY_tag
++{
++ WAKEUP_ACTIVE_HIGH = 0,
++ WAKEUP_ACTIVE_LOW
++} AVALANCHE_WAKEUP_POLARITY_T;
++
++void avalanche_wakeup_ctrl(AVALANCHE_WAKEUP_INTERRUPT_T wakeup_int,
++ AVALANCHE_WAKEUP_CTRL_T wakeup_ctrl,
++ AVALANCHE_WAKEUP_POLARITY_T wakeup_polarity);
++
++/*****************************************************************************
++ * GPIO Control
++ *****************************************************************************/
++
++typedef enum AVALANCHE_GPIO_PIN_MODE_tag
++{
++ FUNCTIONAL_PIN = 0,
++ GPIO_PIN = 1
++} AVALANCHE_GPIO_PIN_MODE_T;
++
++typedef enum AVALANCHE_GPIO_PIN_DIRECTION_tag
++{
++ GPIO_OUTPUT_PIN = 0,
++ GPIO_INPUT_PIN = 1
++} AVALANCHE_GPIO_PIN_DIRECTION_T;
++
++typedef enum { GPIO_FALSE, GPIO_TRUE } AVALANCHE_GPIO_BOOL_T;
++
++void avalanche_gpio_init(void);
++int avalanche_gpio_ctrl(unsigned int gpio_pin,
++ AVALANCHE_GPIO_PIN_MODE_T pin_mode,
++ AVALANCHE_GPIO_PIN_DIRECTION_T pin_direction);
++int avalanche_gpio_ctrl_with_link_count(unsigned int gpio_pin,
++ AVALANCHE_GPIO_PIN_MODE_T pin_mode,
++ AVALANCHE_GPIO_PIN_DIRECTION_T pin_direction);
++int avalanche_gpio_out_bit(unsigned int gpio_pin, int value);
++int avalanche_gpio_in_bit(unsigned int gpio_pin);
++int avalanche_gpio_out_value(unsigned int out_val, unsigned int set_mask, unsigned int reg_index);
++int avalanche_gpio_out_value_with_link_count(unsigned int out_val, unsigned int set_mask, unsigned int reg_index);
++int avalanche_gpio_in_value(unsigned int *in_val, unsigned int reg_index);
++
++unsigned int avalanche_get_chip_version_info(void);
++
++unsigned int avalanche_get_vbus_freq(void);
++void avalanche_set_vbus_freq(unsigned int);
++
++
++typedef int (*SET_MDIX_ON_CHIP_FN_T)(unsigned int base_addr, unsigned int operation);
++int avalanche_set_mdix_on_chip(unsigned int base_addr, unsigned int operation);
++unsigned int avalanche_is_mdix_on_chip(void);
++
++#endif
+diff -urN linux.old/include/asm-mips/ar7/avalanche_regs.h linux.dev/include/asm-mips/ar7/avalanche_regs.h
+--- linux.old/include/asm-mips/ar7/avalanche_regs.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/include/asm-mips/ar7/avalanche_regs.h 2005-11-10 01:10:46.071588750 +0100
+@@ -0,0 +1,567 @@
++/*
++ * $Id$
++ * Avalanche Register Descriptions
++ *
++ * Jeff Harrell, jharrell@ti.com
++ * 2000 (c) Texas Instruments Inc.
++ */
++
++#ifndef __AVALANCHE_REGS_H
++#define __AVALANCHE_REGS_H
++
++#include <asm/addrspace.h>
++#include <linux/config.h>
++
++/*----------------------------------------*/
++/* Base offsets within the Avalanche ASIC */
++/*----------------------------------------*/
++
++#define BBIF_SPACE0 (KSEG1ADDR(0x01000000))
++#define BBIF_SPACE1 (KSEG1ADDR(0x01800000))
++#define BBIF_CONTROL (KSEG1ADDR(0x02000000))
++#define ATM_SAR_BASE (KSEG1ADDR(0x03000000))
++#define USB_MCU_BASE (KSEG1ADDR(0x03400000))
++#define DES_BASE (KSEG1ADDR(0x08600000))
++#define ETH_MACA_BASE (KSEG1ADDR(0x08610000))
++#define ETH_MACB_BASE (KSEG1ADDR(0x08612800))
++#define MEM_CTRLR_BASE (KSEG1ADDR(0x08610800))
++#define GPIO_BASE (KSEG1ADDR(0x08610900))
++#define CLK_CTRL_BASE (KSEG1ADDR(0x08610A00))
++#define WATCH_DOG_BASE (KSEG1ADDR(0x08610B00))
++#define TMR1_BASE (KSEG1ADDR(0x08610C00))
++#define TRM2_BASE (KSEG1ADDR(0x08610D00))
++#define UARTA_BASE (KSEG1ADDR(0x08610E00))
++#define UARTB_BASE (KSEG1ADDR(0x08610F00))
++#define I2C_BASE (KSEG1ADDR(0x08611000))
++#define DEV_ID_BASE (KSEG1ADDR(0x08611100))
++#define USB_BASE (KSEG1ADDR(0x08611200))
++#define PCI_CONFIG_BASE (KSEG1ADDR(0x08611300))
++#define DMA_BASE (KSEG1ADDR(0x08611400))
++#define RESET_CTRL_BASE (KSEG1ADDR(0x08611600))
++#define DSL_IF_BASE (KSEG1ADDR(0x08611B00))
++#define INT_CTL_BASE (KSEG1ADDR(0x08612400))
++#define PHY_BASE (KSEG1ADDR(0x1E000000))
++
++/*---------------------------------*/
++/* Device ID, chip version number */
++/*---------------------------------*/
++
++#define AVALANCHE_CHVN (*(volatile unsigned int *)(DEV_ID_BASE+0x14))
++#define AVALANCHE_DEVID1 (*(volatile unsigned int *)(DEV_ID_BASE+0x18))
++#define AVALANCHE_DEVID2 (*(volatile unsigned int *)(DEV_ID_BASE+0x1C))
++
++/*----------------------------------*/
++/* Reset Control VW changed to ptrs */
++/*----------------------------------*/
++
++#define AVALANCHE_PRCR (*(volatile unsigned int *)(RESET_CTRL_BASE + 0x0)) /* Peripheral reset control */
++#define AVALANCHE_SWRCR (*(volatile unsigned int *)(RESET_CTRL_BASE + 0x4)) /* Software reset control */
++#define AVALANCHE_RSR (*(volatile unsigned int *)(RESET_CTRL_BASE + 0x8)) /* Reset status register */
++
++/* reset control bits */
++
++#define AV_RST_UART0 (1<<0) /* Brings UART0 out of reset */
++#define AV_RST_UART1 (1<<1) /* Brings UART1 out of reset */
++#define AV_RST_IICM (1<<2) /* Brings the I2CM out of reset */
++#define AV_RST_TIMER0 (1<<3) /* Brings Timer 0 out of reset */
++#define AV_RST_TIMER1 (1<<4) /* Brings Timer 1 out of reset */
++#define AV_RST_DES (1<<5) /* Brings the DES module out of reset */
++#define AV_RST_GPIO (1<<6) /* Brings the GPIO module out of reset (see note below) */
++/*
++ JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE
++ If you reset the GPIO interface all of the directions (i/o) of the UART B
++ interface pins are inputs and must be reconfigured so as not to lose the
++ serial console interface
++ JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE
++*/
++#define AV_RST_BBIF (1<<7) /* Brings the Broadband interface out of reset */
++#define AV_RST_USB (1<<8) /* Brings the USB module out of reset */
++#define AV_RST_SAR (1<<9) /* Brings the SAR out of reset */
++#define AV_RST_HDLC (1<<10) /* Brings the HDLC module out of reset */
++#define AV_RST_PCI (1<<16) /* Brings the PCI module out of reset */
++#define AV_RST_ETH_MAC0 (1<<17) /* Brings the Ethernet MAC0 out of reset */
++#define AV_RST_PICO_DMA (1<<18) /* Brings the PICO DMA module out of reset */
++#define AV_RST_BIST (1<<19) /* Brings the BIST module out of reset */
++#define AV_RST_DSP (1<<20) /* Brings the DSP sub system out of reset */
++#define AV_RST_ETH_MAC1 (1<<21) /* Brings the Ethernet MAC1 out of reset */
++
++/*----------------------*/
++/* Physical interfaces */
++/*----------------------*/
++
++/* Phy loopback */
++#define PHY_LOOPBACK 1
++
++
++/* Phy 0 */
++#define PHY0BASE (PHY_BASE)
++#define PHY0RST (*(volatile unsigned char *) (PHY0BASE)) /* reset */
++#define PHY0CTRL (*(volatile unsigned char *) (PHY0BASE+0x5)) /* control */
++#define PHY0RACPCTRL (*(volatile unsigned char *) (PHY0BASE+0x50)) /* RACP control/status */
++#define PHY0TACPCTRL (*(volatile unsigned char *) (PHY0BASE+0x60)) /* TACP idle/unassigned cell hdr */
++#define PHY0RACPINT (*(volatile unsigned char *) (PHY0BASE+0x51)) /* RACP interrupt enable/Status */
++
++
++/* Phy 1 */
++
++#define PHY1BASE (PHY_BASE + 0x100000)
++#define PHY1RST (*(volatile unsigned char *) (PHY1BASE)) /* reset */
++#define PHY1CTRL (*(volatile unsigned char *) (PHY1BASE+0x5)) /* control */
++#define PHY1RACPCTRL (*(volatile unsigned char *) (PHY1BASE+0x50))
++#define PHY1TACPCTRL (*(volatile unsigned char *) (PHY1BASE+0x60))
++#define PHY1RACPINT (*(volatile unsigned char *) (PHY1BASE+0x51))
++
++/* Phy 2 */
++
++#define PHY2BASE (PHY_BASE + 0x200000)
++#define PHY2RST (*(volatile unsigned char *) (PHY2BASE)) /* reset */
++#define PHY2CTRL (*(volatile unsigned char *) (PHY2BASE+0x5)) /* control */
++#define PHY2RACPCTRL (*(volatile unsigned char *) (PHY2BASE+0x50))
++#define PHY2TACPCTRL (*(volatile unsigned char *) (PHY2BASE+0x60))
++#define PHY2RACPINT (*(volatile unsigned char *) (PHY2BASE+0x51))
++
++/*-------------------*/
++/* Avalanche ATM SAR */
++/*-------------------*/
++
++#define AVSAR_SYSCONFIG (*(volatile unsigned int*)(ATM_SAR_BASE+0x00000000)) /* SAR system config register */
++#define AVSAR_SYSSTATUS (*(volatile unsigned int*)(ATM_SAR_BASE+0x00000004)) /* SAR system status register */
++#define AVSAR_INT_ENABLE (*(volatile unsigned int*)(ATM_SAR_BASE+0x00000008)) /* SAR interrupt enable register */
++#define AVSAR_CONN_VPI_VCI (*(volatile unsigned int*)(ATM_SAR_BASE+0x0000000c)) /* VPI/VCI connection config */
++#define AVSAR_CONN_CONFIG (*(volatile unsigned int*)(ATM_SAR_BASE+0x00000010)) /* Connection config register */
++#define AVSAR_OAM_CONFIG (*(volatile unsigned int*)(ATM_SAR_BASE+0x00000018)) /* OAM configuration register */
++
++/* Transmit completion ring registers */
++
++#define AVSAR_TCRAPTR (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000100))
++#define AVSAR_TCRASIZE (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000104))
++#define AVSAR_TCRAINTTHRESH (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000108))
++#define AVSAR_TCRATOTENT (*(volatile unsigned int *)(ATM_SAR_BASE+0x0000010c))
++#define AVSAR_TCRAFREEENT (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000110))
++#define AVSAR_TCRAPENDENT (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000114))
++#define AVSAR_TCRAENTINC (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000118))
++#define AVSAR_TCRBPTR (*(volatile unsigned int *)(ATM_SAR_BASE+0x0000011c))
++#define AVSAR_TCRBSIZE (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000120))
++#define AVSAR_TCRBINTTHRESH (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000124))
++#define AVSAR_TCRBTOTENT (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000128))
++#define AVSAR_TCRBFREEENT (*(volatile unsigned int *)(ATM_SAR_BASE+0x0000012c))
++#define AVSAR_TCRBPENDENT (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000130))
++#define AVSAR_TCRBENTINC (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000134))
++
++/* Transmit Queue Packet registers */
++#define AVSAR_TXQUEUE_PKT0 (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000140))
++#define AVSAR_TXQUEUE_PKT1 (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000144))
++#define AVSAR_TXQUEUE_PKT2 (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000148))
++#define AVSAR_TX_FLUSH (*(volatile unsigned int *)(ATM_SAR_BASE+0x0000014C))
++/* Receive completion ring registers */
++
++#define AVSAR_RCRAPTR (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000200))
++#define AVSAR_RCRASIZE (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000204))
++#define AVSAR_RCRAINTTHRESH (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000208))
++#define AVSAR_RCRATOTENT (*(volatile unsigned int *)(ATM_SAR_BASE+0x0000020c))
++#define AVSAR_RCRAFREEENT (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000210))
++#define AVSAR_RCRAPENDENT (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000214))
++#define AVSAR_RCRAENTINC (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000218))
++#define AVSAR_RCRBPTR (*(volatile unsigned int *)(ATM_SAR_BASE+0x0000021c))
++#define AVSAR_RCRBSIZE (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000220))
++#define AVSAR_RCRBINTTHRESH (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000224))
++#define AVSAR_RCRBTOTENT (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000228))
++#define AVSAR_RCRBFREEENT (*(volatile unsigned int *)(ATM_SAR_BASE+0x0000022c))
++#define AVSAR_RCRBPENDENT (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000230))
++#define AVSAR_RCRBENTINC (*(volatile unsigned int *)(ATM_SAR_BASE+0x00000234))
++
++#define AVSAR_RXFBL_ADD0 (*(volatile unsigned int*)(ATM_SAR_BASE+0x00000240)) /* Rx Free buffer list add 0 */
++#define AVSAR_RXFBL_ADD1 (*(volatile unsigned int*)(ATM_SAR_BASE+0x00000244)) /* Rx Free buffer list add 1 */
++#define AVSAR_RXFBL_ADD2 (*(volatile unsigned int*)(ATM_SAR_BASE+0x00000248)) /* Rx Free buffer list add 2 */
++#define AVSAR_RXFBLSIZE_0 (*(volatile unsigned int*)(ATM_SAR_BASE+0x0000028c)) /* Rx Free buffer list size 0 */
++#define AVSAR_RXFBLSIZE_1 (*(volatile unsigned int*)(ATM_SAR_BASE+0x0000029c)) /* Rx Free buffer list size 1 */
++#define AVSAR_RXFBLSIZE_2 (*(volatile unsigned int*)(ATM_SAR_BASE+0x000002ac)) /* Rx Free buffer list size 2 */
++#define AVSAR_RXFBLSIZE_3 (*(volatile unsigned int*)(ATM_SAR_BASE+0x000002bc)) /* Rx Free buffer list size 3 */
++
++
++#if defined(CONFIG_MIPS_EVM3D) || defined(CONFIG_MIPS_AR5D01) || defined(CONFIG_MIPS_AR5W01)
++
++#define AVSAR_SAR_FREQUENCY (*(volatile unsigned int*)(ATM_SAR_BASE+0x00010480))
++#define AVSAR_OAM_CC_SINK (*(volatile unsigned int*)(ATM_SAR_BASE+0x00010484))
++#define AVSAR_OAM_AIS_RDI_RX (*(volatile unsigned int*)(ATM_SAR_BASE+0x00010488))
++#define AVSAR_OAM_CPID0 (*(volatile unsigned int*)(ATM_SAR_BASE+0x000104E0))
++#define AVSAR_OAM_LLID0 (*(volatile unsigned int*)(ATM_SAR_BASE+0x000104F0))
++#define AVSAR_OAM_CPID1 (*(volatile unsigned int*)(ATM_SAR_BASE+0x000104E4))
++#define AVSAR_OAM_LLID1 (*(volatile unsigned int*)(ATM_SAR_BASE+0x000104F4))
++#define AVSAR_OAM_CPID2 (*(volatile unsigned int*)(ATM_SAR_BASE+0x000104E8))
++#define AVSAR_OAM_LLID2 (*(volatile unsigned int*)(ATM_SAR_BASE+0x000104F8))
++#define AVSAR_OAM_CPID3 (*(volatile unsigned int*)(ATM_SAR_BASE+0x000104EC))
++#define AVSAR_OAM_LLID3 (*(volatile unsigned int*)(ATM_SAR_BASE+0x000104FC))
++#define AVSAR_OAM_CORR_TAG (*(volatile unsigned int*)(ATM_SAR_BASE+0x00010500))
++#define AVSAR_OAM_FAR_COUNT (*(volatile unsigned int*)(ATM_SAR_BASE+0x00010520))
++#define AVSAR_OAM_NEAR_COUNT (*(volatile unsigned int*)(ATM_SAR_BASE+0x00010540))
++#define AVSAR_OAM_CONFIG_REG (*(volatile unsigned int*)(ATM_SAR_BASE+0x00000018))
++#define AVSAR_FAIRNESS_REG (*(volatile unsigned int*)(ATM_SAR_BASE+0x000104B8))
++#define AVSAR_UBR_PCR_REG (*(volatile unsigned int*)(ATM_SAR_BASE+0x00010490))
++
++
++/*
++
++#define OAM_CPID_ADD 0xa30104e0
++
++#define OAM_LLID_ADD 0xa30104f0
++
++#define OAM_LLID_VAL 0xffffffff
++
++#define OAM_CORR_TAG 0xa3010500
++
++#define OAM_FAR_COUNT_ADD 0xa3010520
++
++#define OAM_NEAR_COUNT_ADD 0xa3010540
++
++#define OAM_CONFIG_REG_ADD 0xa3000018
++*/
++
++
++#else /* CONFIG_MIPS_EVM3 || CONFIG_MIPS_ACPEP */
++
++#define AVSAR_SAR_FREQUENCY (*(volatile unsigned int*)(ATM_SAR_BASE+0x00012000))
++#define AVSAR_OAM_CC_SINK (*(volatile unsigned int*)(ATM_SAR_BASE+0x00012004))
++#define AVSAR_OAM_AIS_RDI_RX (*(volatile unsigned int*)(ATM_SAR_BASE+0x00012008))
++#define AVSAR_OAM_CPID (*(volatile unsigned int*)(ATM_SAR_BASE+0x00012300))
++
++#endif /* CONFIG_MIPS_EVM3D || CONFIG_MIPS_AR5D01 || CONFIG_MIPS_AR5W01 */
++
++
++#define AVSAR_STATE_RAM (ATM_SAR_BASE + 0x010000) /* SAR state RAM */
++#define AVSAR_PDSP_BASE (ATM_SAR_BASE + 0x020000) /* SAR PDSP base address */
++#define AVSAR_TXDMA_BASE (ATM_SAR_BASE + 0x030000) /* Transmit DMA state base */
++#define AVSAR_TDMASTATE6 0x18 /* Transmit DMA state word 6 */
++#define AVSAR_RXDMA_BASE (ATM_SAR_BASE + 0x040000) /* Receive DMA state base */
++#define AVSAR_RDMASTATE0 0x0 /* Receive DMA state word 0 */
++
++/*------------------------------------------*/
++/* DSL Interface */
++/*------------------------------------------*/
++
++#define AVDSL_TX_EN (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000000))
++#define AVDSL_RX_EN (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000004))
++#define AVDSL_POLL (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000008))
++
++/* Fast */
++
++#define AVDSL_TX_FIFO_ADDR0 (*(volatile unsigned int *)(DSL_IF_BASE + 0x0000000C))
++#define AVDSL_TX_FIFO_BASE0 (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000010))
++#define AVDSL_TX_FIFO_LEN0 (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000014))
++#define AVDSL_TX_FIFO_PR0 (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000018))
++#define AVDSL_RX_FIFO_ADDR0 (*(volatile unsigned int *)(DSL_IF_BASE + 0x0000001C))
++#define AVDSL_RX_FIFO_BASE0 (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000020))
++#define AVDSL_RX_FIFO_LEN0 (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000024))
++#define AVDSL_RX_FIFO_PR0 (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000028))
++
++/* Interleaved */
++
++#define AVDSL_TX_FIFO_ADDR1 (*(volatile unsigned int *)(DSL_IF_BASE + 0x0000002C))
++#define AVDSL_TX_FIFO_BASE1 (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000030))
++#define AVDSL_TX_FIFO_LEN1 (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000034))
++#define AVDSL_TX_FIFO_PR1 (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000038))
++#define AVDSL_RX_FIFO_ADDR1 (*(volatile unsigned int *)(DSL_IF_BASE + 0x0000003C))
++#define AVDSL_RX_FIFO_BASE1 (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000040))
++#define AVDSL_RX_FIFO_LEN1 (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000044))
++#define AVDSL_RX_FIFO_PR1 (*(volatile unsigned int *)(DSL_IF_BASE + 0x00000048))
++
++/*------------------------------------------*/
++/* Broadband I/F */
++/*------------------------------------------*/
++
++#define AVBBIF_BBIF_CNTRL (*(volatile unsigned int *)(BBIF_CONTROL + 0x00000000))
++#define AVBBIF_ADDR_TRANS_0 (*(volatile unsigned int *)(BBIF_CONTROL + 0x00000004))
++#define AVBBIF_ADDR_TRANS_1 (*(volatile unsigned int *)(BBIF_CONTROL + 0x00000008))
++#define AVBBIF_ADDR_XB_MX_BL (*(volatile unsigned int *)(BBIF_CONTROL + 0x0000000C))
++#define AVBBIF_INFIFO_LVL (*(volatile unsigned int *)(BBIF_CONTROL + 0x00000010))
++#define AVBBIF_OUTFIFO_LVL (*(volatile unsigned int *)(BBIF_CONTROL + 0x00000014))
++
++#define AVBBIF_DISABLED 0x0
++#define AVBBIF_LBT4040_INT 0x1
++#define AVBBIF_XBUS 0x2
++#define AVBBIF_LBT4040_EXT 0x4
++
++#define AVBBIF_ADDR_MASK0 0xff000000 /* handles upper bits of BBIF 0 address */
++#define AVBBIF_ADDR_MASK1 0xff800000 /* handles upper bits of BBIF 1 address */
++#define AVBBIF_TRANS_MASK 0xff000000
++/*------------------------------------------*/
++/* GPIO I/F */
++/*------------------------------------------*/
++
++#define GPIO_DATA_INPUT (*(volatile unsigned int *)(GPIO_BASE + 0x00000000))
++#define GPIO_DATA_OUTPUT (*(volatile unsigned int *)(GPIO_BASE + 0x00000004))
++#define GPIO_DATA_DIR (*(volatile unsigned int *)(GPIO_BASE + 0x00000008)) /* 0=output 1=input */
++#define GPIO_DATA_ENABLE (*(volatile unsigned int *)(GPIO_BASE + 0x0000000C)) /* 0=GPIO Mux 1=GPIO */
++
++#define GPIO_0 (1<<21)
++#define GPIO_1 (1<<22)
++#define GPIO_2 (1<<23)
++#define GPIO_3 (1<<24)
++#define EINT_1 (1<<18)
++
++/*
++ JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE
++ If you reset the GPIO interface all of the directions (i/o) of the UART B
++ interface pins are inputs and must be reconfigured so as not to lose the
++ serial console interface
++ JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE JAH NOTE
++*/
++
++/*------------------------------------------*/
++/* CLK_CTRL */
++/*------------------------------------------*/
++#define PERIPH_CLK_CTL (*(volatile unsigned int *)(CLK_CTRL_BASE + 0x00000004))
++
++#define PCLK_0_HALF_VBUS (0<<16)
++#define PCLK_EQ_INPUT (1<<16)
++#define BBIF_CLK_HALF_VBUS (0<<17)
+#define BBIF_CLK_EQ_VBUS (1<<17)
+#define BBIF_CLK_EQ_BBCLK (3<<17)
+#define DSP_MODCLK_DSPCLKI (0<<20)
+#define USB_CLK_EQ_USBCLKI (0<<21)
+#define USB_CLK_EQ_REFCLKI (1<<21)
+
-+/*------------------------------------------*/
-+/* PCI Control Registers */
-+/*------------------------------------------*/
-+#define PCIC_CONTROL (*(volatile unsigned int *)(PCI_CONFIG_BASE))
-+#define PCIC_CONTROL_CFG_DONE (1<<0)
-+#define PCIC_CONTROL_DIS_SLAVE_TO (1<<1)
-+#define PCIC_CONTROL_FORCE_DELAY_READ (1<<2)
-+#define PCIC_CONTROL_FORCE_DELAY_READ_LINE (1<<3)
-+#define PCIC_CONTROL_FORCE_DELAY_READ_MULT (1<<4)
-+#define PCIC_CONTROL_MEM_SPACE_EN (1<<5)
-+#define PCIC_CONTROL_MEM_MASK (1<<6)
-+#define PCIC_CONTROL_IO_SPACE_EN (1<<7)
-+#define PCIC_CONTROL_IO_MASK (1<<8)
-+/* PCIC_CONTROL_RESERVED (1<<9) */
-+#define PCIC_CONTROL_BASE0_EN (1<<10)
-+#define PCIC_CONTROL_BASE1_EN (1<<11)
-+#define PCIC_CONTROL_BASE2_EN (1<<12)
-+#define PCIC_CONTROL_HOLD_MASTER_WRITE (1<<13)
-+#define PCIC_CONTROL_ARBITER_EN (1<<14)
-+#define PCIC_INT_SOURCE (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000004))
-+#define PCIC_INT_SOURCE_PWR_MGMT (1<<0)
-+#define PCIC_INT_SOURCE_PCI_TARGET (1<<1)
-+#define PCIC_INT_SOURCE_PCI_MASTER (1<<2)
-+#define PCIC_INT_SOURCE_POWER_WAKEUP (1<<3)
-+#define PCIC_INT_SOURCE_PMEIN (1<<4)
-+/* PCIC_INT_SOURCE_RESERVED (1<<5) */
-+/* PCIC_INT_SOURCE_RESERVED (1<<6) */
-+#define PCIC_INT_SOURCE_PIC_INTA (1<<7)
-+#define PCIC_INT_SOURCE_PIC_INTB (1<<8)
-+#define PCIC_INT_SOURCE_PIC_INTC (1<<9)
-+#define PCIC_INT_SOURCE_PIC_INTD (1<<10)
-+#define PCIC_INT_SOURCE_SOFT_INT0 (1<<11)
-+#define PCIC_INT_SOURCE_SOFT_INT1 (1<<12)
-+#define PCIC_INT_SOURCE_SOFT_INT2 (1<<13)
-+#define PCIC_INT_SOURCE_SOFT_INT3 (1<<14)
-+#define PCIC_INT_CLEAR (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000008))
-+#define PCIC_INT_CLEAR_PM (1<<0)
-+#define PCIC_INT_CLEAR_PCI_TARGET (1<<1)
-+#define PCIC_INT_CLEAR_PCI_MASTER (1<<2)
-+/* PCIC_INT_CLEAR_RESERVED (1<<3) */
-+#define PCIC_INT_CLEAR_PMEIN (1<<4)
-+/* PCIC_INT_CLEAR_RESERVED (1<<5) */
-+/* PCIC_INT_CLEAR_RESERVED (1<<6) */
-+#define PCIC_INT_CLEAR_PCI_INTA (1<<7)
-+#define PCIC_INT_CLEAR_PCI_INTB (1<<8)
-+#define PCIC_INT_CLEAR_PCI_INTC (1<<9)
-+#define PCIC_INT_CLEAR_PCI_INTD (1<<10)
-+#define PCIC_INT_CLEAR_SOFT_INT0 (1<<11)
-+#define PCIC_INT_CLEAR_SOFT_INT1 (1<<12)
-+#define PCIC_INT_CLEAR_SOFT_INT2 (1<<13)
-+#define PCIC_INT_CLEAR_SOFT_INT3 (1<<14)
-+#define PCIC_INT_EN_AVAL (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x0000000c))
-+#define PCIC_INT_EN_AVAL_PM (1<<0)
-+#define PCIC_INT_EN_AVAL_PCI_TARGET (1<<1)
-+#define PCIC_INT_EN_AVAL_PCI_MASTER (1<<2)
-+/* PCIC_INT_EN_AVAL_RESERVED (1<<3) */
-+#define PCIC_INT_EN_AVAL_PMEIN (1<<4)
-+/* PCIC_INT_EN_AVAL_RESERVED (1<<5) */
-+/* PCIC_INT_EN_AVAL_RESERVED (1<<6) */
-+#define PCIC_INT_EN_AVAL_PCI_INTA (1<<7)
-+#define PCIC_INT_EN_AVAL_PCI_INTB (1<<8)
-+#define PCIC_INT_EN_AVAL_PCI_INTC (1<<9)
-+#define PCIC_INT_EN_AVAL_PCI_INTD (1<<10)
-+#define PCIC_INT_EN_AVAL_SOFT_INT0 (1<<11)
-+#define PCIC_INT_EN_AVAL_SOFT_INT1 (1<<12)
-+#define PCIC_INT_EN_AVAL_SOFT_INT2 (1<<13)
-+#define PCIC_INT_EN_AVAL_SOFT_INT3 (1<<14)
-+#define PCIC_INT_EN_PCI (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000010))
-+#define PCIC_INT_EN_PCI_PM (1<<0)
-+#define PCIC_INT_EN_PCI_PCI_TARGET (1<<1)
-+#define PCIC_INT_EN_PCI_PCI_MASTER (1<<2)
-+/* PCIC_INT_EN_PCI_RESERVED (1<<3) */
-+#define PCIC_INT_EN_PCI_PMEIN (1<<4)
-+/* PCIC_INT_EN_PCI_RESERVED (1<<5) */
-+/* PCIC_INT_EN_PCI_RESERVED (1<<6) */
-+#define PCIC_INT_EN_PCI_PCI_INTA (1<<7)
-+#define PCIC_INT_EN_PCI_PCI_INTB (1<<8)
-+#define PCIC_INT_EN_PCI_PCI_INTC (1<<9)
-+#define PCIC_INT_EN_PCI_PCI_INTD (1<<10)
-+#define PCIC_INT_EN_PCI_SOFT_INT0 (1<<11)
-+#define PCIC_INT_EN_PCI_SOFT_INT1 (1<<12)
-+#define PCIC_INT_EN_PCI_SOFT_INT2 (1<<13)
-+#define PCIC_INT_EN_PCI_SOFT_INT3 (1<<14)
-+#define PCIC_INT_SWSET (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000014))
-+#define PCIC_INT_SWSET_SOFT_INT0 (1<<0)
-+#define PCIC_INT_SWSET_SOFT_INT1 (1<<1)
-+#define PCIC_INT_SWSET_SOFT_INT2 (1<<2)
-+#define PCIC_INT_SWSET_SOFT_INT3 (1<<3)
-+#define PCIC_PM_CTL (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000018))
-+#define PCIC_PM_CTL_PWR_STATE_MASK (0x02)
-+/* PCIC_PM_CTL_RESERVED (1<<2) */
-+/* PCIC_PM_CTL_RESERVED (1<<3) */
-+/* PCIC_PM_CTL_RESERVED (1<<4) */
-+/* PCIC_PM_CTL_RESERVED (1<<5) */
-+/* PCIC_PM_CTL_RESERVED (1<<6) */
-+/* PCIC_PM_CTL_RESERVED (1<<7) */
-+/* PCIC_PM_CTL_RESERVED (1<<8) */
-+/* PCIC_PM_CTL_RESERVED (1<<9) */
-+#define PCIC_PM_CTL_PWR_SUPPORT (1<<10)
-+#define PCIC_PM_CTL_PMEIN (1<<11)
-+#define PCIC_PM_CTL_CAP_MASK (*(volatile unsigned short int *)(PCI_CONFIG_BASE + 0x0000001a))
-+#define PCIC_PM_CONSUME (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x0000001c))
-+#define PCIC_PM_CONSUME_D0 (*(volatile unsigned char *)(PCI_CONFIG_BASE + 0x0000001c))
-+#define PCIC_PM_CONSUME_D1 (*(volatile unsigned char *)(PCI_CONFIG_BASE + 0x0000001d))
-+#define PCIC_PM_CONSUME_D2 (*(volatile unsigned char *)(PCI_CONFIG_BASE + 0x0000001e))
-+#define PCIC_PM_CONSUME_D3 (*(volatile unsigned char *)(PCI_CONFIG_BASE + 0x0000001f))
-+#define PCIC_PM_DISSAPATED (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000020))
-+#define PCIC_PM_DISSAPATED_D0 (*(volatile unsigned char *)(PCI_CONFIG_BASE + 0x00000020))
-+#define PCIC_PM_DISSAPATED_D1 (*(volatile unsigned char *)(PCI_CONFIG_BASE + 0x00000021))
-+#define PCIC_PM_DISSAPATED_D2 (*(volatile unsigned char *)(PCI_CONFIG_BASE + 0x00000022))
-+#define PCIC_PM_DISSAPATED_D3 (*(volatile unsigned char *)(PCI_CONFIG_BASE + 0x00000023))
-+#define PCIC_PM_DATA_SCALE (*(volatile unsigned short int *)(PCI_CONFIG_BASE + 0x00000024))
-+#define PCIC_VEND_DEV_ID (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000028))
-+#define PCIC_SUB_VEND_DEV_ID (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x0000002c))
-+#define PCIC_CLASS_REV_ID (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000030))
-+#define PCIC_MAX_MIN (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000034))
-+#define PCIC_MAST_MEM_AT0 (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x0000003c))
-+#define PCIC_MAST_MEM_AT1 (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000040))
-+#define PCIC_MAST_MEM_AT2 (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000044))
-+#define PCIC_SLAVE_MASK0 (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x0000004c))
-+#define PCIC_SLAVE_MASK1 (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000050))
-+#define PCIC_SLAVE_MASK2 (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000054))
-+#define PCIC_SLAVE_BASE_AT0 (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000058))
-+#define PCIC_SLAVE_BASE_AT1 (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x0000005c))
-+#define PCIC_SLAVE_BASE_AT2 (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000060))
-+#define PCIC_CONF_COMMAND (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000090))
-+#define PCIC_CONF_ADDR (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000094))
-+#define PCIC_CONF_DATA (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000098))
++/*------------------------------------------*/
++/* PCI Control Registers */
++/*------------------------------------------*/
++#define PCIC_CONTROL (*(volatile unsigned int *)(PCI_CONFIG_BASE))
++#define PCIC_CONTROL_CFG_DONE (1<<0)
++#define PCIC_CONTROL_DIS_SLAVE_TO (1<<1)
++#define PCIC_CONTROL_FORCE_DELAY_READ (1<<2)
++#define PCIC_CONTROL_FORCE_DELAY_READ_LINE (1<<3)
++#define PCIC_CONTROL_FORCE_DELAY_READ_MULT (1<<4)
++#define PCIC_CONTROL_MEM_SPACE_EN (1<<5)
++#define PCIC_CONTROL_MEM_MASK (1<<6)
++#define PCIC_CONTROL_IO_SPACE_EN (1<<7)
++#define PCIC_CONTROL_IO_MASK (1<<8)
++/* PCIC_CONTROL_RESERVED (1<<9) */
++#define PCIC_CONTROL_BASE0_EN (1<<10)
++#define PCIC_CONTROL_BASE1_EN (1<<11)
++#define PCIC_CONTROL_BASE2_EN (1<<12)
++#define PCIC_CONTROL_HOLD_MASTER_WRITE (1<<13)
++#define PCIC_CONTROL_ARBITER_EN (1<<14)
++#define PCIC_INT_SOURCE (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000004))
++#define PCIC_INT_SOURCE_PWR_MGMT (1<<0)
++#define PCIC_INT_SOURCE_PCI_TARGET (1<<1)
++#define PCIC_INT_SOURCE_PCI_MASTER (1<<2)
++#define PCIC_INT_SOURCE_POWER_WAKEUP (1<<3)
++#define PCIC_INT_SOURCE_PMEIN (1<<4)
++/* PCIC_INT_SOURCE_RESERVED (1<<5) */
++/* PCIC_INT_SOURCE_RESERVED (1<<6) */
++#define PCIC_INT_SOURCE_PIC_INTA (1<<7)
++#define PCIC_INT_SOURCE_PIC_INTB (1<<8)
++#define PCIC_INT_SOURCE_PIC_INTC (1<<9)
++#define PCIC_INT_SOURCE_PIC_INTD (1<<10)
++#define PCIC_INT_SOURCE_SOFT_INT0 (1<<11)
++#define PCIC_INT_SOURCE_SOFT_INT1 (1<<12)
++#define PCIC_INT_SOURCE_SOFT_INT2 (1<<13)
++#define PCIC_INT_SOURCE_SOFT_INT3 (1<<14)
++#define PCIC_INT_CLEAR (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000008))
++#define PCIC_INT_CLEAR_PM (1<<0)
++#define PCIC_INT_CLEAR_PCI_TARGET (1<<1)
++#define PCIC_INT_CLEAR_PCI_MASTER (1<<2)
++/* PCIC_INT_CLEAR_RESERVED (1<<3) */
++#define PCIC_INT_CLEAR_PMEIN (1<<4)
++/* PCIC_INT_CLEAR_RESERVED (1<<5) */
++/* PCIC_INT_CLEAR_RESERVED (1<<6) */
++#define PCIC_INT_CLEAR_PCI_INTA (1<<7)
++#define PCIC_INT_CLEAR_PCI_INTB (1<<8)
++#define PCIC_INT_CLEAR_PCI_INTC (1<<9)
++#define PCIC_INT_CLEAR_PCI_INTD (1<<10)
++#define PCIC_INT_CLEAR_SOFT_INT0 (1<<11)
++#define PCIC_INT_CLEAR_SOFT_INT1 (1<<12)
++#define PCIC_INT_CLEAR_SOFT_INT2 (1<<13)
++#define PCIC_INT_CLEAR_SOFT_INT3 (1<<14)
++#define PCIC_INT_EN_AVAL (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x0000000c))
++#define PCIC_INT_EN_AVAL_PM (1<<0)
++#define PCIC_INT_EN_AVAL_PCI_TARGET (1<<1)
++#define PCIC_INT_EN_AVAL_PCI_MASTER (1<<2)
++/* PCIC_INT_EN_AVAL_RESERVED (1<<3) */
++#define PCIC_INT_EN_AVAL_PMEIN (1<<4)
++/* PCIC_INT_EN_AVAL_RESERVED (1<<5) */
++/* PCIC_INT_EN_AVAL_RESERVED (1<<6) */
++#define PCIC_INT_EN_AVAL_PCI_INTA (1<<7)
++#define PCIC_INT_EN_AVAL_PCI_INTB (1<<8)
++#define PCIC_INT_EN_AVAL_PCI_INTC (1<<9)
++#define PCIC_INT_EN_AVAL_PCI_INTD (1<<10)
++#define PCIC_INT_EN_AVAL_SOFT_INT0 (1<<11)
++#define PCIC_INT_EN_AVAL_SOFT_INT1 (1<<12)
++#define PCIC_INT_EN_AVAL_SOFT_INT2 (1<<13)
++#define PCIC_INT_EN_AVAL_SOFT_INT3 (1<<14)
++#define PCIC_INT_EN_PCI (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000010))
++#define PCIC_INT_EN_PCI_PM (1<<0)
++#define PCIC_INT_EN_PCI_PCI_TARGET (1<<1)
++#define PCIC_INT_EN_PCI_PCI_MASTER (1<<2)
++/* PCIC_INT_EN_PCI_RESERVED (1<<3) */
++#define PCIC_INT_EN_PCI_PMEIN (1<<4)
++/* PCIC_INT_EN_PCI_RESERVED (1<<5) */
++/* PCIC_INT_EN_PCI_RESERVED (1<<6) */
++#define PCIC_INT_EN_PCI_PCI_INTA (1<<7)
++#define PCIC_INT_EN_PCI_PCI_INTB (1<<8)
++#define PCIC_INT_EN_PCI_PCI_INTC (1<<9)
++#define PCIC_INT_EN_PCI_PCI_INTD (1<<10)
++#define PCIC_INT_EN_PCI_SOFT_INT0 (1<<11)
++#define PCIC_INT_EN_PCI_SOFT_INT1 (1<<12)
++#define PCIC_INT_EN_PCI_SOFT_INT2 (1<<13)
++#define PCIC_INT_EN_PCI_SOFT_INT3 (1<<14)
++#define PCIC_INT_SWSET (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000014))
++#define PCIC_INT_SWSET_SOFT_INT0 (1<<0)
++#define PCIC_INT_SWSET_SOFT_INT1 (1<<1)
++#define PCIC_INT_SWSET_SOFT_INT2 (1<<2)
++#define PCIC_INT_SWSET_SOFT_INT3 (1<<3)
++#define PCIC_PM_CTL (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000018))
++#define PCIC_PM_CTL_PWR_STATE_MASK (0x02)
++/* PCIC_PM_CTL_RESERVED (1<<2) */
++/* PCIC_PM_CTL_RESERVED (1<<3) */
++/* PCIC_PM_CTL_RESERVED (1<<4) */
++/* PCIC_PM_CTL_RESERVED (1<<5) */
++/* PCIC_PM_CTL_RESERVED (1<<6) */
++/* PCIC_PM_CTL_RESERVED (1<<7) */
++/* PCIC_PM_CTL_RESERVED (1<<8) */
++/* PCIC_PM_CTL_RESERVED (1<<9) */
++#define PCIC_PM_CTL_PWR_SUPPORT (1<<10)
++#define PCIC_PM_CTL_PMEIN (1<<11)
++#define PCIC_PM_CTL_CAP_MASK (*(volatile unsigned short int *)(PCI_CONFIG_BASE + 0x0000001a))
++#define PCIC_PM_CONSUME (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x0000001c))
++#define PCIC_PM_CONSUME_D0 (*(volatile unsigned char *)(PCI_CONFIG_BASE + 0x0000001c))
++#define PCIC_PM_CONSUME_D1 (*(volatile unsigned char *)(PCI_CONFIG_BASE + 0x0000001d))
++#define PCIC_PM_CONSUME_D2 (*(volatile unsigned char *)(PCI_CONFIG_BASE + 0x0000001e))
++#define PCIC_PM_CONSUME_D3 (*(volatile unsigned char *)(PCI_CONFIG_BASE + 0x0000001f))
++#define PCIC_PM_DISSAPATED (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000020))
++#define PCIC_PM_DISSAPATED_D0 (*(volatile unsigned char *)(PCI_CONFIG_BASE + 0x00000020))
++#define PCIC_PM_DISSAPATED_D1 (*(volatile unsigned char *)(PCI_CONFIG_BASE + 0x00000021))
++#define PCIC_PM_DISSAPATED_D2 (*(volatile unsigned char *)(PCI_CONFIG_BASE + 0x00000022))
++#define PCIC_PM_DISSAPATED_D3 (*(volatile unsigned char *)(PCI_CONFIG_BASE + 0x00000023))
++#define PCIC_PM_DATA_SCALE (*(volatile unsigned short int *)(PCI_CONFIG_BASE + 0x00000024))
++#define PCIC_VEND_DEV_ID (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000028))
++#define PCIC_SUB_VEND_DEV_ID (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x0000002c))
++#define PCIC_CLASS_REV_ID (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000030))
++#define PCIC_MAX_MIN (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000034))
++#define PCIC_MAST_MEM_AT0 (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x0000003c))
++#define PCIC_MAST_MEM_AT1 (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000040))
++#define PCIC_MAST_MEM_AT2 (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000044))
++#define PCIC_SLAVE_MASK0 (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x0000004c))
++#define PCIC_SLAVE_MASK1 (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000050))
++#define PCIC_SLAVE_MASK2 (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000054))
++#define PCIC_SLAVE_BASE_AT0 (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000058))
++#define PCIC_SLAVE_BASE_AT1 (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x0000005c))
++#define PCIC_SLAVE_BASE_AT2 (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000060))
++#define PCIC_CONF_COMMAND (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000090))
++#define PCIC_CONF_ADDR (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000094))
++#define PCIC_CONF_DATA (*(volatile unsigned int *)(PCI_CONFIG_BASE + 0x00000098))
++
++/*------------------------------------------*/
++/* IIC_INTERFACE */
++/*------------------------------------------*/
++#define I2C_DATA_HI (*(volatile unsigned int *)(I2C_BASE + 0x0))
++#define I2C_DATA_LOW (*(volatile unsigned int *)(I2C_BASE + 0x4))
++#define I2C_CONFIG (*(volatile unsigned int *)(I2C_BASE + 0x8))
++#define I2C_DATA_READ (*(volatile unsigned int *)(I2C_BASE + 0xC))
++#define I2C_CLOCK_DIV (*(volatile unsigned int *)(I2C_BASE + 0x10))
++
++#define I2CWRITE 0x200
++#define I2CREAD 0x300
++#define I2C_END_BURST 0x400
++
++/* read bits */
++#define I2C_READ_ERROR 0x8000
++#define I2C_READ_COMPLETE 0x4000
++#define I2C_READ_BUSY 0x2000
++
++/* device types */
++#define I2C_IO_EXPANDER 0x2
++#define I2C_RTC 0xd
++
++/* device Addresses on I2C bus (EVM3) */
++#define SEVEN_SEGMENT_DISP 0x23 /* Device type = 0x2, Addr = 3 */
++#define EVM3_RTC 0xd0 /* Device type = 0xd, Addr = 0 */
++#define EVM3_RTC_I2C_ADDR 0x0
++
++/*------------------------------------------*/
++/* Ethernet MAC register offset definitions */
++/*------------------------------------------*/
++#define VMAC_DMACONFIG(X) (*(volatile unsigned int *)(X + 0x00000000))
++#define VMAC_INTSTS(X) (*(volatile unsigned int *)(X + 0x00000004))
++#define VMAC_INTMASK(X) (*(volatile unsigned int *)(X + 0x00000008))
++
++#define VMAC_WRAPCLK(X) (*(volatile unsigned int *)(X + 0x00000340))
++#define VMAC_STATSBASE(X) (*(volatile unsigned int *)(X + 0x00000400))
++
++#define VMAC_TCRPTR(X) (*(volatile unsigned int *)(X + 0x00000100))
++#define VMAC_TCRSIZE(X) (*(volatile unsigned int *)(X + 0x00000104))
++#define VMAC_TCRINTTHRESH(X) (*(volatile unsigned int *)(X + 0x00000108))
++#define VMAC_TCRTOTENT(X) (*(volatile unsigned int *)(X + 0x0000010C))
++#define VMAC_TCRFREEENT(X) (*(volatile unsigned int *)(X + 0x00000110))
++#define VMAC_TCRPENDENT(X) (*(volatile unsigned int *)(X + 0x00000114))
++#define VMAC_TCRENTINC(X) (*(volatile unsigned int *)(X + 0x00000118))
++#define VMAC_TXISRPACE(X) (*(volatile unsigned int *)(X + 0x0000011c))
++
++
++#define VMAC_TDMASTATE0(X) (*(volatile unsigned int *)(X + 0x00000120))
++#define VMAC_TDMASTATE1(X) (*(volatile unsigned int *)(X + 0x00000124))
++#define VMAC_TDMASTATE2(X) (*(volatile unsigned int *)(X + 0x00000128))
++#define VMAC_TDMASTATE3(X) (*(volatile unsigned int *)(X + 0x0000012C))
++#define VMAC_TDMASTATE4(X) (*(volatile unsigned int *)(X + 0x00000130))
++#define VMAC_TDMASTATE5(X) (*(volatile unsigned int *)(X + 0x00000134))
++#define VMAC_TDMASTATE6(X) (*(volatile unsigned int *)(X + 0x00000138))
++#define VMAC_TDMASTATE7(X) (*(volatile unsigned int *)(X + 0x0000013C))
++#define VMAC_TXPADDCNT(X) (*(volatile unsigned int *)(X + 0x00000140))
++#define VMAC_TXPADDSTART(X) (*(volatile unsigned int *)(X + 0x00000144))
++#define VMAC_TXPADDEND(X) (*(volatile unsigned int *)(X + 0x00000148))
++#define VMAC_TXQFLUSH(X) (*(volatile unsigned int *)(X + 0x0000014C))
++
++#define VMAC_RCRPTR(X) (*(volatile unsigned int *)(X + 0x00000200))
++#define VMAC_RCRSIZE(X) (*(volatile unsigned int *)(X + 0x00000204))
++#define VMAC_RCRINTTHRESH(X) (*(volatile unsigned int *)(X + 0x00000208))
++#define VMAC_RCRTOTENT(X) (*(volatile unsigned int *)(X + 0x0000020C))
++#define VMAC_RCRFREEENT(X) (*(volatile unsigned int *)(X + 0x00000210))
++#define VMAC_RCRPENDENT(X) (*(volatile unsigned int *)(X + 0x00000214))
++#define VMAC_RCRENTINC(X) (*(volatile unsigned int *)(X + 0x00000218))
++#define VMAC_RXISRPACE(X) (*(volatile unsigned int *)(X + 0x0000021c))
++
++#define VMAC_RDMASTATE0(X) (*(volatile unsigned int *)(X + 0x00000220))
++#define VMAC_RDMASTATE1(X) (*(volatile unsigned int *)(X + 0x00000224))
++#define VMAC_RDMASTATE2(X) (*(volatile unsigned int *)(X + 0x00000228))
++#define VMAC_RDMASTATE3(X) (*(volatile unsigned int *)(X + 0x0000022C))
++#define VMAC_RDMASTATE4(X) (*(volatile unsigned int *)(X + 0x00000230))
++#define VMAC_RDMASTATE5(X) (*(volatile unsigned int *)(X + 0x00000234))
++#define VMAC_RDMASTATE6(X) (*(volatile unsigned int *)(X + 0x00000238))
++#define VMAC_RDMASTATE7(X) (*(volatile unsigned int *)(X + 0x0000023C))
++#define VMAC_FBLADDCNT(X) (*(volatile unsigned int *)(X + 0x00000240))
++#define VMAC_FBLADDSTART(X) (*(volatile unsigned int *)(X + 0x00000244))
++#define VMAC_FBLADDEND(X) (*(volatile unsigned int *)(X + 0x00000248))
++#define VMAC_RXONOFF(X) (*(volatile unsigned int *)(X + 0x0000024C))
++
++#define VMAC_FBL0NEXTD(X) (*(volatile unsigned int *)(X + 0x00000280))
++#define VMAC_FBL0LASTD(X) (*(volatile unsigned int *)(X + 0x00000284))
++#define VMAC_FBL0COUNTD(X) (*(volatile unsigned int *)(X + 0x00000288))
++#define VMAC_FBL0BUFSIZE(X) (*(volatile unsigned int *)(X + 0x0000028C))
++
++#define VMAC_MACCONTROL(X) (*(volatile unsigned int *)(X + 0x00000300))
++#define VMAC_MACSTATUS(X) (*(volatile unsigned int *)(X + 0x00000304))
++#define VMAC_MACADDRHI(X) (*(volatile unsigned int *)(X + 0x00000308))
++#define VMAC_MACADDRLO(X) (*(volatile unsigned int *)(X + 0x0000030C))
++#define VMAC_MACHASH1(X) (*(volatile unsigned int *)(X + 0x00000310))
++#define VMAC_MACHASH2(X) (*(volatile unsigned int *)(X + 0x00000314))
++
++#define VMAC_WRAPCLK(X) (*(volatile unsigned int *)(X + 0x00000340))
++#define VMAC_BOFTEST(X) (*(volatile unsigned int *)(X + 0x00000344))
++#define VMAC_PACTEST(X) (*(volatile unsigned int *)(X + 0x00000348))
++#define VMAC_PAUSEOP(X) (*(volatile unsigned int *)(X + 0x0000034C))
++
++#define VMAC_MDIOCONTROL(X) (*(volatile unsigned int *)(X + 0x00000380))
++#define VMAC_MDIOUSERACCESS(X) (*(volatile unsigned int *)(X +0x00000384))
++#define VMAC_MDIOACK(X) (*(volatile unsigned int *)(X + 0x00000388))
++#define VMAC_MDIOLINK(X) (*(volatile unsigned int *)(X + 0x0000038C))
++#define VMAC_MDIOMACPHY(X) (*(volatile unsigned int *)(X + 0x00000390))
++
++#define VMAC_STATS_BASE(X) (X + 0x00000400)
++
++#endif __AVALANCHE_REGS_H
++
++
++
++
++
++
+diff -urN linux.old/include/asm-mips/ar7/avalanche_types.h linux.dev/include/asm-mips/ar7/avalanche_types.h
+--- linux.old/include/asm-mips/ar7/avalanche_types.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/include/asm-mips/ar7/avalanche_types.h 2005-11-10 01:10:46.071588750 +0100
+@@ -0,0 +1,126 @@
++/*------------------------------------------------------------------------------------------*\
++\*------------------------------------------------------------------------------------------*/
++#ifndef _avalanche_types_h_
++#define _avalanche_types_h_
++
++/*--- #include <asm/avalanche/generic/hal_modules/haltypes.h> ---*/
++#ifndef TRUE
++#define TRUE 1
++#endif
++#ifndef FALSE
++#define FALSE 0
++#endif
++#ifndef NULL
++#define NULL (void *)0
++#endif
++
++/*------------------------------------------------------------------------------------------*\
++ * Typen für Texas GPL Module
++\*------------------------------------------------------------------------------------------*/
++#ifndef __UINT8_T__
++typedef unsigned char UINT8;
++#define __UINT8_T__
++#endif
++
++#ifndef __UCHAR_T__
++typedef unsigned char UCHAR;
++#define __UCHAR_T__
++#endif
++
++#ifndef __INT8_T__
++typedef signed char INT8;
++#define __INT8_T__
++#endif
++
++#ifndef __UINT16_T__
++typedef unsigned short UINT16;
++#define __UINT16_T__
++#endif
++
++#ifndef __USHORT_T__
++typedef unsigned short USHORT;
++#define __USHORT_T__
++#endif
++
++#ifndef __INT16_T__
++typedef signed short INT16;
++#define __INT16_T__
++#endif
++
++#ifndef __UINT32_T__
++typedef unsigned int UINT32;
++#define __UINT32_T__
++#endif
++
++#ifndef __UINT_T__
++typedef unsigned int UINT;
++#define __UINT_T__
++#endif
++
++#ifndef __INT32_T__
++typedef signed int INT32;
++#define __INT32_T__
++#endif
++
++#ifndef __ULONG_T__
++typedef unsigned long ULONG;
++#define __ULONG_T__
++#endif
++
++#ifndef __BOOL_T__
++typedef int BOOL;
++#define __BOOL_T__
++#endif
++
++#ifndef __STATUS_T__
++typedef int STATUS;
++#define __STATUS_T__
++#endif
++
++/*------------------------------------------------------------------------------------------*\
++\*------------------------------------------------------------------------------------------*/
++typedef void (*p_vlynq_intr_cntrl_isr_t)(void *,void *,void *);
++typedef INT32 (*p_vlynq_interrupt_vector_set_t)(void *, UINT32, UINT32, INT32, INT32, INT32);
++typedef INT32 (*p_vlynq_interrupt_vector_cntl_t)(void *, UINT32, INT32, UINT32);
++typedef UINT32 (*p_vlynq_interrupt_get_count_t)(void *, UINT32);
++typedef INT32 (*p_vlynq_install_isr_t)(void *, UINT32, p_vlynq_intr_cntrl_isr_t, void *, void *, void *);
++typedef INT32 (*p_vlynq_uninstall_isr_t)(void *, UINT32, void *, void *, void *);
++typedef void (*p_vlynq_root_isr_t)(void *);
++typedef void (*p_vlynq_delay_t)(UINT32);
++typedef INT32 (*p_vlynq_interrupt_vector_map_t)(void *, INT32, UINT32, UINT32);
++typedef INT32 (*p_vlynq_interrupt_set_polarity_t)(void *, INT32, UINT32, INT32);
++typedef INT32 (*p_vlynq_interrupt_get_polarity_t)(void *, INT32, UINT32);
++typedef INT32 (*p_vlynq_interrupt_set_type_t)(void *, INT32, UINT32, INT32);
++typedef INT32 (*p_vlynq_interrupt_get_type_t)(void *, INT32, UINT32);
++typedef INT32 (*p_vlynq_interrupt_enable_t)(void *, INT32, UINT32);
++typedef INT32 (*p_vlynq_interrupt_disable_t)(void *, INT32, UINT32);
++
++/*------------------------------------------------------------------------------------------*\
++\*------------------------------------------------------------------------------------------*/
++extern p_vlynq_interrupt_vector_set_t p_vlynq_interrupt_vector_set;
++extern p_vlynq_interrupt_vector_cntl_t p_vlynq_interrupt_vector_cntl;
++extern p_vlynq_interrupt_get_count_t p_vlynq_interrupt_get_count;
++extern p_vlynq_install_isr_t p_vlynq_install_isr;
++extern p_vlynq_uninstall_isr_t p_vlynq_uninstall_isr;
++extern p_vlynq_root_isr_t p_vlynq_root_isr;
++extern p_vlynq_delay_t p_vlynq_delay;
++extern p_vlynq_interrupt_vector_map_t p_vlynq_interrupt_vector_map;
++extern p_vlynq_interrupt_set_polarity_t p_vlynq_interrupt_set_polarity;
++extern p_vlynq_interrupt_get_polarity_t p_vlynq_interrupt_get_polarity;
++extern p_vlynq_interrupt_set_type_t p_vlynq_interrupt_set_type;
++extern p_vlynq_interrupt_get_type_t p_vlynq_interrupt_get_type;
++extern p_vlynq_interrupt_enable_t p_vlynq_interrupt_enable;
++extern p_vlynq_interrupt_disable_t p_vlynq_interrupt_disable;
++extern void *p_vlynqDevice0;
++extern void *p_vlynqDevice1;
++
++/*------------------------------------------------------------------------------------------*\
++\*------------------------------------------------------------------------------------------*/
++enum _avalanche_need_ {
++ avalanche_need_vlynq,
++ avalanche_need_auto_mdix
++};
++
++int avalanche_need(enum _avalanche_need_);
++
++#endif /*--- #ifndef _avalanche_types_h_ ---*/
+diff -urN linux.old/include/asm-mips/ar7/if_port.h linux.dev/include/asm-mips/ar7/if_port.h
+--- linux.old/include/asm-mips/ar7/if_port.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/include/asm-mips/ar7/if_port.h 2005-11-10 01:10:46.071588750 +0100
+@@ -0,0 +1,26 @@
++/*******************************************************************************
++ * FILE PURPOSE: Interface port id Header file
++ *******************************************************************************
++ * FILE NAME: if_port.h
++ *
++ * DESCRIPTION: Header file carrying information about port ids of interfaces
++ *
++ *
++ * (C) Copyright 2003, Texas Instruments, Inc
++ ******************************************************************************/
++#ifndef _IF_PORT_H_
++#define _IF_PORT_H_
++
++#define AVALANCHE_CPMAC_LOW_PORT_ID 0
++#define AVALANCHE_CPMAC_HIGH_PORT_ID 1
++#define AVALANCHE_USB_PORT_ID 2
++#define AVALANCHE_WLAN_PORT_ID 3
++
++
++#define AVALANCHE_MARVELL_BASE_PORT_ID 4
++
++/* The marvell ports occupy port ids from 4 to 8 */
++/* so the next port id number should start at 9 */
++
++
++#endif /* _IF_PORT_H_ */
+diff -urN linux.old/include/asm-mips/ar7/sangam.h linux.dev/include/asm-mips/ar7/sangam.h
+--- linux.old/include/asm-mips/ar7/sangam.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/include/asm-mips/ar7/sangam.h 2005-11-10 01:10:46.071588750 +0100
+@@ -0,0 +1,180 @@
++#ifndef _SANGAM_H_
++#define _SANGAM_H_
++
++#include <linux/config.h>
++#include <asm/addrspace.h>
++
++/*----------------------------------------------------
++ * Sangam's Module Base Addresses
++ *--------------------------------------------------*/
++#define AVALANCHE_ADSL_SUB_SYS_MEM_BASE (KSEG1ADDR(0x01000000)) /* AVALANCHE ADSL Mem Base */
++#define AVALANCHE_BROADBAND_INTERFACE__BASE (KSEG1ADDR(0x02000000)) /* AVALANCHE BBIF */
++#define AVALANCHE_ATM_SAR_BASE (KSEG1ADDR(0x03000000)) /* AVALANCHE ATM SAR */
++#define AVALANCHE_USB_SLAVE_BASE (KSEG1ADDR(0x03400000)) /* AVALANCHE USB SLAVE */
++#define AVALANCHE_LOW_VLYNQ_MEM_MAP_BASE (KSEG1ADDR(0x04000000)) /* AVALANCHE VLYNQ 0 Mem map */
++#define AVALANCHE_LOW_CPMAC_BASE (KSEG1ADDR(0x08610000)) /* AVALANCHE CPMAC 0 */
++#define AVALANCHE_EMIF_CONTROL_BASE (KSEG1ADDR(0x08610800)) /* AVALANCHE EMIF */
++#define AVALANCHE_GPIO_BASE (KSEG1ADDR(0x08610900)) /* AVALANCHE GPIO */
++#define AVALANCHE_CLOCK_CONTROL_BASE (KSEG1ADDR(0x08610A00)) /* AVALANCHE Clock Control */
++#define AVALANCHE_WATCHDOG_TIMER_BASE (KSEG1ADDR(0x08610B00)) /* AVALANCHE Watch Dog Timer */
++#define AVALANCHE_TIMER0_BASE (KSEG1ADDR(0x08610C00)) /* AVALANCHE Timer 1 */
++#define AVALANCHE_TIMER1_BASE (KSEG1ADDR(0x08610D00)) /* AVALANCHE Timer 2 */
++#define AVALANCHE_UART0_REGS_BASE (KSEG1ADDR(0x08610E00)) /* AVALANCHE UART 0 */
++#define AVALANCHE_UART1_REGS_BASE (KSEG1ADDR(0x08610F00)) /* AVALANCHE UART 0 */
++#define AVALANCHE_I2C_BASE (KSEG1ADDR(0x08611000)) /* AVALANCHE I2C */
++#define AVALANCHE_USB_SLAVE_CONTROL_BASE (KSEG1ADDR(0x08611200)) /* AVALANCHE USB DMA */
++#define AVALANCHE_MCDMA0_CTRL_BASE (KSEG1ADDR(0x08611400)) /* AVALANCHE MC DMA 0 (channels 0-3) */
++#define AVALANCHE_RESET_CONTROL_BASE (KSEG1ADDR(0x08611600)) /* AVALANCHE Reset Control */
++#define AVALANCHE_BIST_CONTROL_BASE (KSEG1ADDR(0x08611700)) /* AVALANCHE BIST Control */
++#define AVALANCHE_LOW_VLYNQ_CONTROL_BASE (KSEG1ADDR(0x08611800)) /* AVALANCHE VLYNQ0 Control */
++#define AVALANCHE_DEVICE_CONFIG_LATCH_BASE (KSEG1ADDR(0x08611A00)) /* AVALANCHE Device Config Latch */
++#define AVALANCHE_HIGH_VLYNQ_CONTROL_BASE (KSEG1ADDR(0x08611C00)) /* AVALANCHE VLYNQ1 Control */
++#define AVALANCHE_MDIO_BASE (KSEG1ADDR(0x08611E00)) /* AVALANCHE MDIO */
++#define AVALANCHE_FSER_BASE (KSEG1ADDR(0x08612000)) /* AVALANCHE FSER base */
++#define AVALANCHE_INTC_BASE (KSEG1ADDR(0x08612400)) /* AVALANCHE INTC */
++#define AVALANCHE_HIGH_CPMAC_BASE (KSEG1ADDR(0x08612800)) /* AVALANCHE CPMAC 1 */
++#define AVALANCHE_HIGH_VLYNQ_MEM_MAP_BASE (KSEG1ADDR(0x0C000000)) /* AVALANCHE VLYNQ 1 Mem map */
++
++#define AVALANCHE_SDRAM_BASE 0x14000000UL
++
++
++/*----------------------------------------------------
++ * Sangam Interrupt Map (Primary Interrupts)
++ *--------------------------------------------------*/
++
++#define AVALANCHE_UNIFIED_SECONDARY_INT 0
++#define AVALANCHE_EXT_INT_0 1
++#define AVALANCHE_EXT_INT_1 2
++/* Line# 3 to 4 are reserved */
++#define AVALANCHE_TIMER_0_INT 5
++#define AVALANCHE_TIMER_1_INT 6
++#define AVALANCHE_UART0_INT 7
++#define AVALANCHE_UART1_INT 8
++#define AVALANCHE_DMA_INT0 9
++#define AVALANCHE_DMA_INT1 10
++/* Line# 11 to 14 are reserved */
++#define AVALANCHE_ATM_SAR_INT 15
++/* Line# 16 to 18 are reserved */
++#define AVALANCHE_LOW_CPMAC_INT 19
++/* Line# 20 is reserved */
++#define AVALANCHE_LOW_VLYNQ_INT 21
++#define AVALANCHE_CODEC_WAKEUP_INT 22
++/* Line# 23 is reserved */
++#define AVALANCHE_USB_SLAVE_INT 24
++#define AVALANCHE_HIGH_VLYNQ_INT 25
++/* Line# 26 to 27 are reserved */
++#define AVALANCHE_UNIFIED_PHY_INT 28
++#define AVALANCHE_I2C_INT 29
++#define AVALANCHE_DMA_INT2 30
++#define AVALANCHE_DMA_INT3 31
++/* Line# 32 is reserved */
++#define AVALANCHE_HIGH_CPMAC_INT 33
++/* Line# 34 to 36 is reserved */
++#define AVALANCHE_VDMA_VT_RX_INT 37
++#define AVALANCHE_VDMA_VT_TX_INT 38
++#define AVALANCHE_ADSL_SUB_SYSTEM_INT 39
++
++
++#define AVALANCHE_EMIF_INT 47
++
++
++
++/*-----------------------------------------------------------
++ * Sangam's Reset Bits
++ *---------------------------------------------------------*/
++
++#define AVALANCHE_UART0_RESET_BIT 0
++#define AVALANCHE_UART1_RESET_BIT 1
++#define AVALANCHE_I2C_RESET_BIT 2
++#define AVALANCHE_TIMER0_RESET_BIT 3
++#define AVALANCHE_TIMER1_RESET_BIT 4
++/* Reset bit 5 is reserved. */
++#define AVALANCHE_GPIO_RESET_BIT 6
++#define AVALANCHE_ADSL_SUB_SYS_RESET_BIT 7
++#define AVALANCHE_USB_SLAVE_RESET_BIT 8
++#define AVALANCHE_ATM_SAR_RESET_BIT 9
++/* Reset bit 10 is reserved. */
++#define AVALANCHE_VDMA_VT_RESET_BIT 11
++#define AVALANCHE_FSER_RESET_BIT 12
++/* Reset bit 13 to 15 are reserved */
++#define AVALANCHE_HIGH_VLYNQ_RESET_BIT 16
++#define AVALANCHE_LOW_CPMAC_RESET_BIT 17
++#define AVALANCHE_MCDMA_RESET_BIT 18
++#define AVALANCHE_BIST_RESET_BIT 19
++#define AVALANCHE_LOW_VLYNQ_RESET_BIT 20
++#define AVALANCHE_HIGH_CPMAC_RESET_BIT 21
++#define AVALANCHE_MDIO_RESET_BIT 22
++#define AVALANCHE_ADSL_SUB_SYS_DSP_RESET_BIT 23
++/* Reset bit 24 to 25 are reserved */
++#define AVALANCHE_LOW_EPHY_RESET_BIT 26
++/* Reset bit 27 to 31 are reserved */
++
++
++#define AVALANCHE_POWER_MODULE_USBSP 0
++#define AVALANCHE_POWER_MODULE_WDTP 1
++#define AVALANCHE_POWER_MODULE_UT0P 2
++#define AVALANCHE_POWER_MODULE_UT1P 3
++#define AVALANCHE_POWER_MODULE_IICP 4
++#define AVALANCHE_POWER_MODULE_VDMAP 5
++#define AVALANCHE_POWER_MODULE_GPIOP 6
++#define AVALANCHE_POWER_MODULE_VLYNQ1P 7
++#define AVALANCHE_POWER_MODULE_SARP 8
++#define AVALANCHE_POWER_MODULE_ADSLP 9
++#define AVALANCHE_POWER_MODULE_EMIFP 10
++#define AVALANCHE_POWER_MODULE_ADSPP 12
++#define AVALANCHE_POWER_MODULE_RAMP 13
++#define AVALANCHE_POWER_MODULE_ROMP 14
++#define AVALANCHE_POWER_MODULE_DMAP 15
++#define AVALANCHE_POWER_MODULE_BISTP 16
++#define AVALANCHE_POWER_MODULE_TIMER0P 18
++#define AVALANCHE_POWER_MODULE_TIMER1P 19
++#define AVALANCHE_POWER_MODULE_EMAC0P 20
++#define AVALANCHE_POWER_MODULE_EMAC1P 22
++#define AVALANCHE_POWER_MODULE_EPHYP 24
++#define AVALANCHE_POWER_MODULE_VLYNQ0P 27
++
++
++
++
++
++/*
++ * Sangam board vectors
++ */
++
++#define AVALANCHE_VECS (KSEG1ADDR(AVALANCHE_SDRAM_BASE))
++#define AVALANCHE_VECS_KSEG0 (KSEG0ADDR(AVALANCHE_SDRAM_BASE))
++
++/*-----------------------------------------------------------------------------
++ * Sangam's system register.
++ *
++ *---------------------------------------------------------------------------*/
++#define AVALANCHE_DCL_BOOTCR (KSEG1ADDR(0x08611A00))
++#define AVALANCHE_EMIF_SDRAM_CFG (AVALANCHE_EMIF_CONTROL_BASE + 0x8)
++#define AVALANCHE_RST_CTRL_PRCR (KSEG1ADDR(0x08611600))
++#define AVALANCHE_RST_CTRL_SWRCR (KSEG1ADDR(0x08611604))
++#define AVALANCHE_RST_CTRL_RSR (KSEG1ADDR(0x08611600))
++
++#define AVALANCHE_POWER_CTRL_PDCR (KSEG1ADDR(0x08610A00))
++#define AVALANCHE_WAKEUP_CTRL_WKCR (KSEG1ADDR(0x08610A0C))
++
++#define AVALANCHE_GPIO_DATA_IN (AVALANCHE_GPIO_BASE + 0x0)
++#define AVALANCHE_GPIO_DATA_OUT (AVALANCHE_GPIO_BASE + 0x4)
++#define AVALANCHE_GPIO_DIR (AVALANCHE_GPIO_BASE + 0x8)
++#define AVALANCHE_GPIO_ENBL (AVALANCHE_GPIO_BASE + 0xC)
++#define AVALANCHE_CVR (AVALANCHE_GPIO_BASE + 0x14)
++
++/*
++ * Yamon Prom print address.
++ */
++#define AVALANCHE_YAMON_FUNCTION_BASE (KSEG1ADDR(0x10000500))
++#define AVALANCHE_YAMON_PROM_PRINT_COUNT_ADDR (AVALANCHE_YAMON_FUNCTION_BASE + 0x4) /* print_count function */
++#define AVALANCHE_YAMON_PROM_PRINT_ADDR (AVALANCHE_YAMON_FUNCTION_BASE + 0x34)
++
++#define AVALANCHE_BASE_BAUD ( 3686400 / 16 )
++
++#define AVALANCHE_GPIO_PIN_COUNT 32
++#define AVALANCHE_GPIO_OFF_MAP {0xF34FFFC0}
++
++#include "sangam_boards.h"
++
++#endif /*_SANGAM_H_ */
+diff -urN linux.old/include/asm-mips/ar7/sangam_boards.h linux.dev/include/asm-mips/ar7/sangam_boards.h
+--- linux.old/include/asm-mips/ar7/sangam_boards.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/include/asm-mips/ar7/sangam_boards.h 2005-11-10 01:10:46.071588750 +0100
+@@ -0,0 +1,77 @@
++#ifndef _SANGAM_BOARDS_H
++#define _SANGAM_BOARDS_H
++
++// Let us define board specific information here.
++
++
++#if defined(CONFIG_AR7DB)
++
++#define AFECLK_FREQ 35328000
++#define REFCLK_FREQ 25000000
++#define OSC3_FREQ 24000000
++#define AVALANCHE_LOW_CPMAC_PHY_MASK 0x80000000
++#define AVALANCHE_HIGH_CPMAC_PHY_MASK 0x55555555
++#define AVALANCHE_LOW_CPMAC_MDIX_MASK 0x80000000
++
++#endif
++
++
++#if defined(CONFIG_AR7RD)
++#define AFECLK_FREQ 35328000
++#define REFCLK_FREQ 25000000
++#define OSC3_FREQ 24000000
++#define AVALANCHE_LOW_CPMAC_PHY_MASK 0x80000000
++#define AVALANCHE_HIGH_CPMAC_PHY_MASK 0x2
++#define AVALANCHE_LOW_CPMAC_MDIX_MASK 0x80000000
++#endif
++
++
++#if defined(CONFIG_AR7WI)
++#define AFECLK_FREQ 35328000
++#define REFCLK_FREQ 25000000
++#define OSC3_FREQ 24000000
++#define AVALANCHE_LOW_CPMAC_PHY_MASK 0x80000000
++#define AVALANCHE_HIGH_CPMAC_PHY_MASK 0x2
++#define AVALANCHE_LOW_CPMAC_MDIX_MASK 0x80000000
++#endif
++
++
++#if defined(CONFIG_AR7V)
++#define AFECLK_FREQ 35328000
++#define REFCLK_FREQ 25000000
++#define OSC3_FREQ 24000000
++#define AVALANCHE_LOW_CPMAC_PHY_MASK 0x80000000
++#define AVALANCHE_HIGH_CPMAC_PHY_MASK 0x2
++#define AVALANCHE_LOW_CPMAC_MDIX_MASK 0x80000000
++#endif
++
++
++#if defined(CONFIG_AR7WRD)
++#define AFECLK_FREQ 35328000
++#define REFCLK_FREQ 25000000
++#define OSC3_FREQ 24000000
++#define AVALANCHE_LOW_CPMAC_PHY_MASK 0x80000000
++#define AVALANCHE_HIGH_CPMAC_PHY_MASK 0x00010000
++#define AVALANCHE_LOW_CPMAC_MDIX_MASK 0x80000000
++#endif
++
++
++#if defined(CONFIG_AR7VWI)
++#define AFECLK_FREQ 35328000
++#define REFCLK_FREQ 25000000
++#define OSC3_FREQ 24000000
++#define AVALANCHE_LOW_CPMAC_PHY_MASK 0x80000000
++#define AVALANCHE_HIGH_CPMAC_PHY_MASK 0x00010000
++#define AVALANCHE_LOW_CPMAC_MDIX_MASK 0x80000000
++#endif
++
++
++#if defined CONFIG_SEAD2
++#define AVALANCHE_LOW_CPMAC_PHY_MASK 0xAAAAAAAA
++#define AVALANCHE_HIGH_CPMAC_PHY_MASK 0x55555555
++#define AVALANCHE_LOW_CPMAC_MDIX_MASK 0
++#include <asm/mips-boards/sead.h>
++#endif
++
++
++#endif
+diff -urN linux.old/include/asm-mips/ar7/tnetd73xx.h linux.dev/include/asm-mips/ar7/tnetd73xx.h
+--- linux.old/include/asm-mips/ar7/tnetd73xx.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/include/asm-mips/ar7/tnetd73xx.h 2005-11-10 01:10:46.075589000 +0100
+@@ -0,0 +1,338 @@
++/******************************************************************************
++ * FILE PURPOSE: TNETD73xx Common Header File
++ ******************************************************************************
++ * FILE NAME: tnetd73xx.h
++ *
++ * DESCRIPTION: shared typedef's, constants and API for TNETD73xx
++ *
++ * REVISION HISTORY:
++ * 27 Nov 02 - PSP TII
++ *
++ * (C) Copyright 2002, Texas Instruments, Inc
++ *******************************************************************************/
++
++/*
++ *
++ *
++ * These are const, typedef, and api definitions for tnetd73xx.
++ *
++ * NOTES:
++ * 1. This file may be included into both C and Assembly files.
++ * - for .s files, please do #define _ASMLANGUAGE in your ASM file to
++ * avoid C data types (typedefs) below;
++ * - for .c files, you don't have to do anything special.
++ *
++ * 2. This file has a number of sections for each SOC subsystem. When adding
++ * a new constant, find the subsystem you are working on and follow the
++ * name pattern. If you are adding another typedef for your interface, please,
++ * place it with other typedefs and function prototypes.
++ *
++ * 3. Please, DO NOT add any macros or types that are local to a subsystem to avoid
++ * cluttering. Include such items directly into the module's .c file or have a
++ * local .h file to pass data between smaller modules. This file defines only
++ * shared items.
++ */
++
++#ifndef __TNETD73XX_H__
++#define __TNETD73XX_H__
++
++#ifndef _ASMLANGUAGE /* This part not for assembly language */
++
++extern unsigned int tnetd73xx_mips_freq;
++extern unsigned int tnetd73xx_vbus_freq;
++
++#include "tnetd73xx_err.h"
++
++#endif /* _ASMLANGUAGE */
++
++
++/*******************************************************************************************
++* Emerald core specific
++******************************************************************************************** */
++
++#ifdef BIG_ENDIAN
++#elif defined(LITTLE_ENDIAN)
++#else
++#error Need to define endianism
++#endif
++
++#ifndef KSEG_MSK
++#define KSEG_MSK 0xE0000000 /* Most significant 3 bits denote kseg choice */
++#endif
++
++#ifndef KSEG_INV_MASK
++#define KSEG_INV_MASK 0x1FFFFFFF /* Inverted mask for kseg address */
++#endif
++
++#ifndef KSEG0_BASE
++#define KSEG0_BASE 0x80000000
++#endif
++
++#ifndef KSEG1_BASE
++#define KSEG1_BASE 0xA0000000
++#endif
++
++#ifndef KSEG0
++#define KSEG0(addr) (((__u32)(addr) & ~KSEG_MSK) | KSEG0_BASE)
++#endif
++
++#ifndef KSEG1
++#define KSEG1(addr) (((__u32)(addr) & ~KSEG_MSK) | KSEG1_BASE)
++#endif
++
++#ifndef KUSEG
++#define KUSEG(addr) ((__u32)(addr) & ~KSEG_MSK)
++#endif
++
++#ifndef PHYS_ADDR
++#define PHYS_ADDR(addr) ((addr) & KSEG_INV_MASK)
++#endif
++
++#ifndef PHYS_TO_K0
++#define PHYS_TO_K0(addr) (PHYS_ADDR(addr)|KSEG0_BASE)
++#endif
++
++#ifndef PHYS_TO_K1
++#define PHYS_TO_K1(addr) (PHYS_ADDR(addr)|KSEG1_BASE)
++#endif
++
++#ifndef REG8_ADDR
++#define REG8_ADDR(addr) (volatile __u8 *)(PHYS_TO_K1(addr))
++#define REG8_DATA(addr) (*(volatile __u8 *)(PHYS_TO_K1(addr)))
++#define REG8_WRITE(addr, data) REG8_DATA(addr) = data;
++#define REG8_READ(addr, data) data = (__u8) REG8_DATA(addr);
++#endif
++
++#ifndef REG16_ADDR
++#define REG16_ADDR(addr) (volatile __u16 *)(PHYS_TO_K1(addr))
++#define REG16_DATA(addr) (*(volatile __u16 *)(PHYS_TO_K1(addr)))
++#define REG16_WRITE(addr, data) REG16_DATA(addr) = data;
++#define REG16_READ(addr, data) data = (__u16) REG16_DATA(addr);
++#endif
++
++#ifndef REG32_ADDR
++#define REG32_ADDR(addr) (volatile __u32 *)(PHYS_TO_K1(addr))
++#define REG32_DATA(addr) (*(volatile __u32 *)(PHYS_TO_K1(addr)))
++#define REG32_WRITE(addr, data) REG32_DATA(addr) = data;
++#define REG32_READ(addr, data) data = (__u32) REG32_DATA(addr);
++#endif
++
++#ifdef _LINK_KSEG0_ /* Application is linked into KSEG0 space */
++#define VIRT_ADDR(addr) PHYS_TO_K0(PHYS_ADDR(addr))
++#endif
++
++#ifdef _LINK_KSEG1_ /* Application is linked into KSEG1 space */
++#define VIRT_ADDR(addr) PHYS_TO_K1(PHYS_ADDR(addr))
++#endif
++
++#if !defined(_LINK_KSEG0_) && !defined(_LINK_KSEG1_)
++#error You must define _LINK_KSEG0_ or _LINK_KSEG1_ to compile the code.
++#endif
++
++/* TNETD73XX chip definations */
++
++#define FREQ_1MHZ 1000000
++#define TNETD73XX_MIPS_FREQ tnetd73xx_mips_freq /* CPU clock frequency */
++#define TNETD73XX_VBUS_FREQ tnetd73xx_vbus_freq /* originally (TNETD73XX_MIPS_FREQ/2) */
++
++#ifdef AR7SEAD2
++#define TNETD73XX_MIPS_FREQ_DEFAULT 25000000 /* 25 Mhz for sead2 board crystal */
++#else
++#define TNETD73XX_MIPS_FREQ_DEFAULT 125000000 /* 125 Mhz */
++#endif
++#define TNETD73XX_VBUS_FREQ_DEFAULT (TNETD73XX_MIPS_FREQ_DEFAULT / 2) /* Sync mode */
++
++
++
++/* Module base addresses */
++#define TNETD73XX_ADSLSS_BASE PHYS_TO_K1(0x01000000) /* ADSLSS Module */
++#define TNETD73XX_BBIF_CTRL_BASE PHYS_TO_K1(0x02000000) /* BBIF Control */
++#define TNETD73XX_ATMSAR_BASE PHYS_TO_K1(0x03000000) /* ATM SAR */
++#define TNETD73XX_USB_BASE PHYS_TO_K1(0x03400000) /* USB Module */
++#define TNETD73XX_VLYNQ0_BASE PHYS_TO_K1(0x04000000) /* VLYNQ0 Module */
++#define TNETD73xx_EMAC0_BASE PHYS_TO_K1(0x08610000) /* EMAC0 Module*/
++#define TNETD73XX_EMIF_BASE PHYS_TO_K1(0x08610800) /* EMIF Module */
++#define TNETD73XX_GPIO_BASE PHYS_TO_K1(0x08610900) /* GPIO control */
++#define TNETD73XX_CLOCK_CTRL_BASE PHYS_TO_K1(0x08610A00) /* Clock Control */
++#define TNETD73XX_WDTIMER_BASE PHYS_TO_K1(0x08610B00) /* WDTIMER Module */
++#define TNETD73XX_TIMER0_BASE PHYS_TO_K1(0x08610C00) /* TIMER0 Module */
++#define TNETD73XX_TIMER1_BASE PHYS_TO_K1(0x08610D00) /* TIMER1 Module */
++#define TNETD73XX_UARTA_BASE PHYS_TO_K1(0x08610E00) /* UART A */
++#define TNETD73XX_UARTB_BASE PHYS_TO_K1(0x08610F00) /* UART B */
++#define TNETD73XX_I2C_BASE PHYS_TO_K1(0x08611000) /* I2C Module */
++#define TNETD73XX_USB_DMA_BASE PHYS_TO_K1(0x08611200) /* USB Module */
++#define TNETD73XX_MCDMA_BASE PHYS_TO_K1(0x08611400) /* MC-DMA */
++#define TNETD73xx_VDMAVT_BASE PHYS_TO_K1(0x08611500) /* VDMAVT Control */
++#define TNETD73XX_RST_CTRL_BASE PHYS_TO_K1(0x08611600) /* Reset Control */
++#define TNETD73xx_BIST_CTRL_BASE PHYS_TO_K1(0x08611700) /* BIST Control */
++#define TNETD73xx_VLYNQ0_CTRL_BASE PHYS_TO_K1(0x08611800) /* VLYNQ0 Control */
++#define TNETD73XX_DCL_BASE PHYS_TO_K1(0x08611A00) /* Device Configuration Latch */
++#define TNETD73xx_VLYNQ1_CTRL_BASE PHYS_TO_K1(0x08611C00) /* VLYNQ1 Control */
++#define TNETD73xx_MDIO_BASE PHYS_TO_K1(0x08611E00) /* MDIO Control */
++#define TNETD73XX_FSER_BASE PHYS_TO_K1(0x08612000) /* FSER Control */
++#define TNETD73XX_INTC_BASE PHYS_TO_K1(0x08612400) /* Interrupt Controller */
++#define TNETD73xx_EMAC1_BASE PHYS_TO_K1(0x08612800) /* EMAC1 Module*/
++#define TNETD73XX_VLYNQ1_BASE PHYS_TO_K1(0x0C000000) /* VLYNQ1 Module */
++
++/* BBIF Registers */
++#define TNETD73XX_BBIF_ADSLADR (TNETD73XX_BBIF_CTRL_BASE + 0x0)
++
++/* Device Configuration Latch Registers */
++#define TNETD73XX_DCL_BOOTCR (TNETD73XX_DCL_BASE + 0x0)
++#define TNETD73XX_DCL_DPLLSELR (TNETD73XX_DCL_BASE + 0x10)
++#define TNETD73XX_DCL_SPEEDCTLR (TNETD73XX_DCL_BASE + 0x14)
++#define TNETD73XX_DCL_SPEEDPWDR (TNETD73XX_DCL_BASE + 0x18)
++#define TNETD73XX_DCL_SPEEDCAPR (TNETD73XX_DCL_BASE + 0x1C)
++
++/* GPIO Control */
++#define TNETD73XX_GPIODINR (TNETD73XX_GPIO_BASE + 0x0)
++#define TNETD73XX_GPIODOUTR (TNETD73XX_GPIO_BASE + 0x4)
++#define TNETD73XX_GPIOPDIRR (TNETD73XX_GPIO_BASE + 0x8)
++#define TNETD73XX_GPIOENR (TNETD73XX_GPIO_BASE + 0xC)
++#define TNETD73XX_CVR (TNETD73XX_GPIO_BASE + 0x14)
++#define TNETD73XX_DIDR1 (TNETD73XX_GPIO_BASE + 0x18)
++#define TNETD73XX_DIDR2 (TNETD73XX_GPIO_BASE + 0x1C)
++
++/* Reset Control */
++#define TNETD73XX_RST_CTRL_PRCR (TNETD73XX_RST_CTRL_BASE + 0x0)
++#define TNETD73XX_RST_CTRL_SWRCR (TNETD73XX_RST_CTRL_BASE + 0x4)
++#define TNETD73XX_RST_CTRL_RSR (TNETD73XX_RST_CTRL_BASE + 0x8)
++
++/* Power Control */
++#define TNETD73XX_POWER_CTRL_PDCR (TNETD73XX_CLOCK_CTRL_BASE + 0x0)
++#define TNETD73XX_POWER_CTRL_PCLKCR (TNETD73XX_CLOCK_CTRL_BASE + 0x4)
++#define TNETD73XX_POWER_CTRL_PDUCR (TNETD73XX_CLOCK_CTRL_BASE + 0x8)
++#define TNETD73XX_POWER_CTRL_WKCR (TNETD73XX_CLOCK_CTRL_BASE + 0xC)
++
++/* Clock Control */
++#define TNETD73XX_CLK_CTRL_SCLKCR (TNETD73XX_CLOCK_CTRL_BASE + 0x20)
++#define TNETD73XX_CLK_CTRL_SCLKPLLCR (TNETD73XX_CLOCK_CTRL_BASE + 0x30)
++#define TNETD73XX_CLK_CTRL_MCLKCR (TNETD73XX_CLOCK_CTRL_BASE + 0x40)
++#define TNETD73XX_CLK_CTRL_MCLKPLLCR (TNETD73XX_CLOCK_CTRL_BASE + 0x50)
++#define TNETD73XX_CLK_CTRL_UCLKCR (TNETD73XX_CLOCK_CTRL_BASE + 0x60)
++#define TNETD73XX_CLK_CTRL_UCLKPLLCR (TNETD73XX_CLOCK_CTRL_BASE + 0x70)
++#define TNETD73XX_CLK_CTRL_ACLKCR0 (TNETD73XX_CLOCK_CTRL_BASE + 0x80)
++#define TNETD73XX_CLK_CTRL_ACLKPLLCR0 (TNETD73XX_CLOCK_CTRL_BASE + 0x90)
++#define TNETD73XX_CLK_CTRL_ACLKCR1 (TNETD73XX_CLOCK_CTRL_BASE + 0xA0)
++#define TNETD73XX_CLK_CTRL_ACLKPLLCR1 (TNETD73XX_CLOCK_CTRL_BASE + 0xB0)
++
++/* EMIF control */
++#define TNETD73XX_EMIF_SDRAM_CFG ( TNETD73XX_EMIF_BASE + 0x08 )
++
++/* UART */
++#ifdef AR7SEAD2
++#define TNETD73XX_UART_FREQ 3686400
++#else
++#define TNETD73XX_UART_FREQ TNETD73XX_VBUS_FREQ
++#endif
++
++/* Interrupt Controller */
++
++/* Primary interrupts */
++#define TNETD73XX_INTC_UNIFIED_SECONDARY 0 /* Unified secondary interrupt */
++#define TNETD73XX_INTC_EXTERNAL0 1 /* External Interrupt Line 0 */
++#define TNETD73XX_INTC_EXTERNAL1 2 /* External Interrupt Line 1 */
++#define TNETD73XX_INTC_RESERVED3 3 /* Reserved */
++#define TNETD73XX_INTC_RESERVED4 4 /* Reserved */
++#define TNETD73XX_INTC_TIMER0 5 /* TIMER 0 int */
++#define TNETD73XX_INTC_TIMER1 6 /* TIMER 1 int */
++#define TNETD73XX_INTC_UART0 7 /* UART 0 int */
++#define TNETD73XX_INTC_UART1 8 /* UART 1 int */
++#define TNETD73XX_INTC_MCDMA0 9 /* MCDMA 0 int */
++#define TNETD73XX_INTC_MCDMA1 10 /* MCDMA 1 int */
++#define TNETD73XX_INTC_RESERVED11 11 /* Reserved */
++#define TNETD73XX_INTC_RESERVED12 12 /* Reserved */
++#define TNETD73XX_INTC_RESERVED13 13 /* Reserved */
++#define TNETD73XX_INTC_RESERVED14 14 /* Reserved */
++#define TNETD73XX_INTC_ATMSAR 15 /* ATM SAR int */
++#define TNETD73XX_INTC_RESERVED16 16 /* Reserved */
++#define TNETD73XX_INTC_RESERVED17 17 /* Reserved */
++#define TNETD73XX_INTC_RESERVED18 18 /* Reserved */
++#define TNETD73XX_INTC_EMAC0 19 /* EMAC 0 int */
++#define TNETD73XX_INTC_RESERVED20 20 /* Reserved */
++#define TNETD73XX_INTC_VLYNQ0 21 /* VLYNQ 0 int */
++#define TNETD73XX_INTC_CODEC 22 /* CODEC int */
++#define TNETD73XX_INTC_RESERVED23 23 /* Reserved */
++#define TNETD73XX_INTC_USBSLAVE 24 /* USB Slave int */
++#define TNETD73XX_INTC_VLYNQ1 25 /* VLYNQ 1 int */
++#define TNETD73XX_INTC_RESERVED26 26 /* Reserved */
++#define TNETD73XX_INTC_RESERVED27 27 /* Reserved */
++#define TNETD73XX_INTC_ETH_PHY 28 /* Ethernet PHY */
++#define TNETD73XX_INTC_I2C 29 /* I2C int */
++#define TNETD73XX_INTC_MCDMA2 30 /* MCDMA 2 int */
++#define TNETD73XX_INTC_MCDMA3 31 /* MCDMA 3 int */
++#define TNETD73XX_INTC_RESERVED32 32 /* Reserved */
++#define TNETD73XX_INTC_EMAC1 33 /* EMAC 1 int */
++#define TNETD73XX_INTC_RESERVED34 34 /* Reserved */
++#define TNETD73XX_INTC_RESERVED35 35 /* Reserved */
++#define TNETD73XX_INTC_RESERVED36 36 /* Reserved */
++#define TNETD73XX_INTC_VDMAVTRX 37 /* VDMAVTRX */
++#define TNETD73XX_INTC_VDMAVTTX 38 /* VDMAVTTX */
++#define TNETD73XX_INTC_ADSLSS 39 /* ADSLSS */
++
++/* Secondary interrupts */
++#define TNETD73XX_INTC_SEC0 40 /* Secondary */
++#define TNETD73XX_INTC_SEC1 41 /* Secondary */
++#define TNETD73XX_INTC_SEC2 42 /* Secondary */
++#define TNETD73XX_INTC_SEC3 43 /* Secondary */
++#define TNETD73XX_INTC_SEC4 44 /* Secondary */
++#define TNETD73XX_INTC_SEC5 45 /* Secondary */
++#define TNETD73XX_INTC_SEC6 46 /* Secondary */
++#define TNETD73XX_INTC_EMIF 47 /* EMIF */
++#define TNETD73XX_INTC_SEC8 48 /* Secondary */
++#define TNETD73XX_INTC_SEC9 49 /* Secondary */
++#define TNETD73XX_INTC_SEC10 50 /* Secondary */
++#define TNETD73XX_INTC_SEC11 51 /* Secondary */
++#define TNETD73XX_INTC_SEC12 52 /* Secondary */
++#define TNETD73XX_INTC_SEC13 53 /* Secondary */
++#define TNETD73XX_INTC_SEC14 54 /* Secondary */
++#define TNETD73XX_INTC_SEC15 55 /* Secondary */
++#define TNETD73XX_INTC_SEC16 56 /* Secondary */
++#define TNETD73XX_INTC_SEC17 57 /* Secondary */
++#define TNETD73XX_INTC_SEC18 58 /* Secondary */
++#define TNETD73XX_INTC_SEC19 59 /* Secondary */
++#define TNETD73XX_INTC_SEC20 60 /* Secondary */
++#define TNETD73XX_INTC_SEC21 61 /* Secondary */
++#define TNETD73XX_INTC_SEC22 62 /* Secondary */
++#define TNETD73XX_INTC_SEC23 63 /* Secondary */
++#define TNETD73XX_INTC_SEC24 64 /* Secondary */
++#define TNETD73XX_INTC_SEC25 65 /* Secondary */
++#define TNETD73XX_INTC_SEC26 66 /* Secondary */
++#define TNETD73XX_INTC_SEC27 67 /* Secondary */
++#define TNETD73XX_INTC_SEC28 68 /* Secondary */
++#define TNETD73XX_INTC_SEC29 69 /* Secondary */
++#define TNETD73XX_INTC_SEC30 70 /* Secondary */
++#define TNETD73XX_INTC_SEC31 71 /* Secondary */
++
++/* These ugly macros are to access the -1 registers, like config1 */
++#define MFC0_SEL1_OPCODE(dst, src)\
++ .word (0x40000000 | ((dst)<<16) | ((src)<<11) | 1);\
++ nop; \
++ nop; \
++ nop
++
++#define MTC0_SEL1_OPCODE(dst, src)\
++ .word (0x40800000 | ((dst)<<16) | ((src)<<11) | 1);\
++ nop; \
++ nop; \
++ nop
++
++
++/* Below are Jade core specific */
++#define CFG0_4K_IL_MASK 0x00380000
++#define CFG0_4K_IL_SHIFT 19
++#define CFG0_4K_IA_MASK 0x00070000
++#define CFG0_4K_IA_SHIFT 16
++#define CFG0_4K_IS_MASK 0x01c00000
++#define CFG0_4K_IS_SHIFT 22
++
++#define CFG0_4K_DL_MASK 0x00001c00
++#define CFG0_4K_DL_SHIFT 10
++#define CFG0_4K_DA_MASK 0x00000380
++#define CFG0_4K_DA_SHIFT 7
++#define CFG0_4K_DS_MASK 0x0000E000
++#define CFG0_4K_DS_SHIFT 13
++
++
++
++#endif /* __TNETD73XX_H_ */
+diff -urN linux.old/include/asm-mips/ar7/tnetd73xx_err.h linux.dev/include/asm-mips/ar7/tnetd73xx_err.h
+--- linux.old/include/asm-mips/ar7/tnetd73xx_err.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/include/asm-mips/ar7/tnetd73xx_err.h 2005-11-10 01:10:46.075589000 +0100
+@@ -0,0 +1,42 @@
++/******************************************************************************
++ * FILE PURPOSE: TNETD73xx Error Definations Header File
++ ******************************************************************************
++ * FILE NAME: tnetd73xx_err.h
++ *
++ * DESCRIPTION: Error definations for TNETD73XX
++ *
++ * REVISION HISTORY:
++ * 27 Nov 02 - PSP TII
++ *
++ * (C) Copyright 2002, Texas Instruments, Inc
++ *******************************************************************************/
+
-+/*------------------------------------------*/
-+/* IIC_INTERFACE */
-+/*------------------------------------------*/
-+#define I2C_DATA_HI (*(volatile unsigned int *)(I2C_BASE + 0x0))
-+#define I2C_DATA_LOW (*(volatile unsigned int *)(I2C_BASE + 0x4))
-+#define I2C_CONFIG (*(volatile unsigned int *)(I2C_BASE + 0x8))
-+#define I2C_DATA_READ (*(volatile unsigned int *)(I2C_BASE + 0xC))
-+#define I2C_CLOCK_DIV (*(volatile unsigned int *)(I2C_BASE + 0x10))
++
++#ifndef __TNETD73XX_ERR_H__
++#define __TNETD73XX_ERR_H__
+
-+#define I2CWRITE 0x200
-+#define I2CREAD 0x300
-+#define I2C_END_BURST 0x400
++typedef enum TNETD73XX_ERR_t
++{
++ TNETD73XX_ERR_OK = 0, /* OK or SUCCESS */
++ TNETD73XX_ERR_ERROR = -1, /* Unspecified/Generic ERROR */
+
-+/* read bits */
-+#define I2C_READ_ERROR 0x8000
-+#define I2C_READ_COMPLETE 0x4000
-+#define I2C_READ_BUSY 0x2000
++ /* Pointers and args */
++ TNETD73XX_ERR_INVARG = -2, /* Invaild argument to the call */
++ TNETD73XX_ERR_NULLPTR = -3, /* NULL pointer */
++ TNETD73XX_ERR_BADPTR = -4, /* Bad (out of mem) pointer */
+
-+/* device types */
-+#define I2C_IO_EXPANDER 0x2
-+#define I2C_RTC 0xd
++ /* Memory issues */
++ TNETD73XX_ERR_ALLOC_FAIL = -10, /* allocation failed */
++ TNETD73XX_ERR_FREE_FAIL = -11, /* free failed */
++ TNETD73XX_ERR_MEM_CORRUPT = -12, /* corrupted memory */
++ TNETD73XX_ERR_BUF_LINK = -13, /* buffer linking failed */
+
-+/* device Addresses on I2C bus (EVM3) */
-+#define SEVEN_SEGMENT_DISP 0x23 /* Device type = 0x2, Addr = 3 */
-+#define EVM3_RTC 0xd0 /* Device type = 0xd, Addr = 0 */
-+#define EVM3_RTC_I2C_ADDR 0x0
++ /* Device issues */
++ TNETD73XX_ERR_DEVICE_TIMEOUT = -20, /* device timeout on read/write */
++ TNETD73XX_ERR_DEVICE_MALFUNC = -21, /* device malfunction */
+
-+/*------------------------------------------*/
-+/* Ethernet MAC register offset definitions */
-+/*------------------------------------------*/
-+#define VMAC_DMACONFIG(X) (*(volatile unsigned int *)(X + 0x00000000))
-+#define VMAC_INTSTS(X) (*(volatile unsigned int *)(X + 0x00000004))
-+#define VMAC_INTMASK(X) (*(volatile unsigned int *)(X + 0x00000008))
++ TNETD73XX_ERR_INVID = -30 /* Invalid ID */
+
-+#define VMAC_WRAPCLK(X) (*(volatile unsigned int *)(X + 0x00000340))
-+#define VMAC_STATSBASE(X) (*(volatile unsigned int *)(X + 0x00000400))
-+
-+#define VMAC_TCRPTR(X) (*(volatile unsigned int *)(X + 0x00000100))
-+#define VMAC_TCRSIZE(X) (*(volatile unsigned int *)(X + 0x00000104))
-+#define VMAC_TCRINTTHRESH(X) (*(volatile unsigned int *)(X + 0x00000108))
-+#define VMAC_TCRTOTENT(X) (*(volatile unsigned int *)(X + 0x0000010C))
-+#define VMAC_TCRFREEENT(X) (*(volatile unsigned int *)(X + 0x00000110))
-+#define VMAC_TCRPENDENT(X) (*(volatile unsigned int *)(X + 0x00000114))
-+#define VMAC_TCRENTINC(X) (*(volatile unsigned int *)(X + 0x00000118))
-+#define VMAC_TXISRPACE(X) (*(volatile unsigned int *)(X + 0x0000011c))
++} TNETD73XX_ERR;
+
++#endif /* __TNETD73XX_ERR_H__ */
+diff -urN linux.old/include/asm-mips/ar7/tnetd73xx_misc.h linux.dev/include/asm-mips/ar7/tnetd73xx_misc.h
+--- linux.old/include/asm-mips/ar7/tnetd73xx_misc.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/include/asm-mips/ar7/tnetd73xx_misc.h 2005-11-10 01:10:46.075589000 +0100
+@@ -0,0 +1,239 @@
++/******************************************************************************
++ * FILE PURPOSE: TNETD73xx Misc modules API Header
++ ******************************************************************************
++ * FILE NAME: tnetd73xx_misc.h
++ *
++ * DESCRIPTION: Clock Control, Reset Control, Power Management, GPIO
++ * FSER Modules API
++ * As per TNETD73xx specifications
++ *
++ * REVISION HISTORY:
++ * 27 Nov 02 - Sharath Kumar PSP TII
++ * 14 Feb 03 - Anant Gole PSP TII
++ *
++ * (C) Copyright 2002, Texas Instruments, Inc
++ *******************************************************************************/
+
-+#define VMAC_TDMASTATE0(X) (*(volatile unsigned int *)(X + 0x00000120))
-+#define VMAC_TDMASTATE1(X) (*(volatile unsigned int *)(X + 0x00000124))
-+#define VMAC_TDMASTATE2(X) (*(volatile unsigned int *)(X + 0x00000128))
-+#define VMAC_TDMASTATE3(X) (*(volatile unsigned int *)(X + 0x0000012C))
-+#define VMAC_TDMASTATE4(X) (*(volatile unsigned int *)(X + 0x00000130))
-+#define VMAC_TDMASTATE5(X) (*(volatile unsigned int *)(X + 0x00000134))
-+#define VMAC_TDMASTATE6(X) (*(volatile unsigned int *)(X + 0x00000138))
-+#define VMAC_TDMASTATE7(X) (*(volatile unsigned int *)(X + 0x0000013C))
-+#define VMAC_TXPADDCNT(X) (*(volatile unsigned int *)(X + 0x00000140))
-+#define VMAC_TXPADDSTART(X) (*(volatile unsigned int *)(X + 0x00000144))
-+#define VMAC_TXPADDEND(X) (*(volatile unsigned int *)(X + 0x00000148))
-+#define VMAC_TXQFLUSH(X) (*(volatile unsigned int *)(X + 0x0000014C))
-+
-+#define VMAC_RCRPTR(X) (*(volatile unsigned int *)(X + 0x00000200))
-+#define VMAC_RCRSIZE(X) (*(volatile unsigned int *)(X + 0x00000204))
-+#define VMAC_RCRINTTHRESH(X) (*(volatile unsigned int *)(X + 0x00000208))
-+#define VMAC_RCRTOTENT(X) (*(volatile unsigned int *)(X + 0x0000020C))
-+#define VMAC_RCRFREEENT(X) (*(volatile unsigned int *)(X + 0x00000210))
-+#define VMAC_RCRPENDENT(X) (*(volatile unsigned int *)(X + 0x00000214))
-+#define VMAC_RCRENTINC(X) (*(volatile unsigned int *)(X + 0x00000218))
-+#define VMAC_RXISRPACE(X) (*(volatile unsigned int *)(X + 0x0000021c))
++#ifndef __TNETD73XX_MISC_H__
++#define __TNETD73XX_MISC_H__
+
-+#define VMAC_RDMASTATE0(X) (*(volatile unsigned int *)(X + 0x00000220))
-+#define VMAC_RDMASTATE1(X) (*(volatile unsigned int *)(X + 0x00000224))
-+#define VMAC_RDMASTATE2(X) (*(volatile unsigned int *)(X + 0x00000228))
-+#define VMAC_RDMASTATE3(X) (*(volatile unsigned int *)(X + 0x0000022C))
-+#define VMAC_RDMASTATE4(X) (*(volatile unsigned int *)(X + 0x00000230))
-+#define VMAC_RDMASTATE5(X) (*(volatile unsigned int *)(X + 0x00000234))
-+#define VMAC_RDMASTATE6(X) (*(volatile unsigned int *)(X + 0x00000238))
-+#define VMAC_RDMASTATE7(X) (*(volatile unsigned int *)(X + 0x0000023C))
-+#define VMAC_FBLADDCNT(X) (*(volatile unsigned int *)(X + 0x00000240))
-+#define VMAC_FBLADDSTART(X) (*(volatile unsigned int *)(X + 0x00000244))
-+#define VMAC_FBLADDEND(X) (*(volatile unsigned int *)(X + 0x00000248))
-+#define VMAC_RXONOFF(X) (*(volatile unsigned int *)(X + 0x0000024C))
-+
-+#define VMAC_FBL0NEXTD(X) (*(volatile unsigned int *)(X + 0x00000280))
-+#define VMAC_FBL0LASTD(X) (*(volatile unsigned int *)(X + 0x00000284))
-+#define VMAC_FBL0COUNTD(X) (*(volatile unsigned int *)(X + 0x00000288))
-+#define VMAC_FBL0BUFSIZE(X) (*(volatile unsigned int *)(X + 0x0000028C))
-+
-+#define VMAC_MACCONTROL(X) (*(volatile unsigned int *)(X + 0x00000300))
-+#define VMAC_MACSTATUS(X) (*(volatile unsigned int *)(X + 0x00000304))
-+#define VMAC_MACADDRHI(X) (*(volatile unsigned int *)(X + 0x00000308))
-+#define VMAC_MACADDRLO(X) (*(volatile unsigned int *)(X + 0x0000030C))
-+#define VMAC_MACHASH1(X) (*(volatile unsigned int *)(X + 0x00000310))
-+#define VMAC_MACHASH2(X) (*(volatile unsigned int *)(X + 0x00000314))
++/*****************************************************************************
++ * Reset Control Module
++ *****************************************************************************/
+
-+#define VMAC_WRAPCLK(X) (*(volatile unsigned int *)(X + 0x00000340))
-+#define VMAC_BOFTEST(X) (*(volatile unsigned int *)(X + 0x00000344))
-+#define VMAC_PACTEST(X) (*(volatile unsigned int *)(X + 0x00000348))
-+#define VMAC_PAUSEOP(X) (*(volatile unsigned int *)(X + 0x0000034C))
++typedef enum TNETD73XX_RESET_MODULE_tag
++{
++ RESET_MODULE_UART0 = 0,
++ RESET_MODULE_UART1 = 1,
++ RESET_MODULE_I2C = 2,
++ RESET_MODULE_TIMER0 = 3,
++ RESET_MODULE_TIMER1 = 4,
++ RESET_MODULE_GPIO = 6,
++ RESET_MODULE_ADSLSS = 7,
++ RESET_MODULE_USBS = 8,
++ RESET_MODULE_SAR = 9,
++ RESET_MODULE_VDMA_VT = 11,
++ RESET_MODULE_FSER = 12,
++ RESET_MODULE_VLYNQ1 = 16,
++ RESET_MODULE_EMAC0 = 17,
++ RESET_MODULE_DMA = 18,
++ RESET_MODULE_BIST = 19,
++ RESET_MODULE_VLYNQ0 = 20,
++ RESET_MODULE_EMAC1 = 21,
++ RESET_MODULE_MDIO = 22,
++ RESET_MODULE_ADSLSS_DSP = 23,
++ RESET_MODULE_EPHY = 26
++} TNETD73XX_RESET_MODULE_T;
++
++typedef enum TNETD73XX_RESET_CTRL_tag
++{
++ IN_RESET = 0,
++ OUT_OF_RESET
++} TNETD73XX_RESET_CTRL_T;
++
++typedef enum TNETD73XX_SYS_RST_MODE_tag
++{
++ RESET_SOC_WITH_MEMCTRL = 1, /* SW0 bit in SWRCR register */
++ RESET_SOC_WITHOUT_MEMCTRL = 2 /* SW1 bit in SWRCR register */
++} TNETD73XX_SYS_RST_MODE_T;
++
++typedef enum TNETD73XX_SYS_RESET_STATUS_tag
++{
++ HARDWARE_RESET = 0,
++ SOFTWARE_RESET0, /* Caused by writing 1 to SW0 bit in SWRCR register */
++ WATCHDOG_RESET,
++ SOFTWARE_RESET1 /* Caused by writing 1 to SW1 bit in SWRCR register */
++} TNETD73XX_SYS_RESET_STATUS_T;
++
++void tnetd73xx_reset_ctrl(TNETD73XX_RESET_MODULE_T reset_module,
++ TNETD73XX_RESET_CTRL_T reset_ctrl);
++TNETD73XX_RESET_CTRL_T tnetd73xx_get_reset_status(TNETD73XX_RESET_MODULE_T reset_module);
++void tnetd73xx_sys_reset(TNETD73XX_SYS_RST_MODE_T mode);
++TNETD73XX_SYS_RESET_STATUS_T tnetd73xx_get_sys_last_reset_status(void);
++
++/*****************************************************************************
++ * Power Control Module
++ *****************************************************************************/
++
++typedef enum TNETD73XX_POWER_MODULE_tag
++{
++ POWER_MODULE_USBSP = 0,
++ POWER_MODULE_WDTP = 1,
++ POWER_MODULE_UT0P = 2,
++ POWER_MODULE_UT1P = 3,
++ POWER_MODULE_IICP = 4,
++ POWER_MODULE_VDMAP = 5,
++ POWER_MODULE_GPIOP = 6,
++ POWER_MODULE_VLYNQ1P = 7,
++ POWER_MODULE_SARP = 8,
++ POWER_MODULE_ADSLP = 9,
++ POWER_MODULE_EMIFP = 10,
++ POWER_MODULE_ADSPP = 12,
++ POWER_MODULE_RAMP = 13,
++ POWER_MODULE_ROMP = 14,
++ POWER_MODULE_DMAP = 15,
++ POWER_MODULE_BISTP = 16,
++ POWER_MODULE_TIMER0P = 18,
++ POWER_MODULE_TIMER1P = 19,
++ POWER_MODULE_EMAC0P = 20,
++ POWER_MODULE_EMAC1P = 22,
++ POWER_MODULE_EPHYP = 24,
++ POWER_MODULE_VLYNQ0P = 27,
++} TNETD73XX_POWER_MODULE_T;
++
++typedef enum TNETD73XX_POWER_CTRL_tag
++{
++ POWER_CTRL_POWER_UP = 0,
++ POWER_CTRL_POWER_DOWN
++} TNETD73XX_POWER_CTRL_T;
++
++typedef enum TNETD73XX_SYS_POWER_MODE_tag
++{
++ GLOBAL_POWER_MODE_RUN = 0, /* All system is up */
++ GLOBAL_POWER_MODE_IDLE, /* MIPS is power down, all peripherals working */
++ GLOBAL_POWER_MODE_STANDBY, /* Chip in power down, but clock to ADSKL subsystem is running */
++ GLOBAL_POWER_MODE_POWER_DOWN /* Total chip is powered down */
++} TNETD73XX_SYS_POWER_MODE_T;
++
++void tnetd73xx_power_ctrl(TNETD73XX_POWER_MODULE_T power_module, TNETD73XX_POWER_CTRL_T power_ctrl);
++TNETD73XX_POWER_CTRL_T tnetd73xx_get_pwr_status(TNETD73XX_POWER_MODULE_T power_module);
++void tnetd73xx_set_global_pwr_mode(TNETD73XX_SYS_POWER_MODE_T power_mode);
++TNETD73XX_SYS_POWER_MODE_T tnetd73xx_get_global_pwr_mode(void);
++
++/*****************************************************************************
++ * Wakeup Control
++ *****************************************************************************/
++
++typedef enum TNETD73XX_WAKEUP_INTERRUPT_tag
++{
++ WAKEUP_INT0 = 1,
++ WAKEUP_INT1 = 2,
++ WAKEUP_INT2 = 4,
++ WAKEUP_INT3 = 8
++} TNETD73XX_WAKEUP_INTERRUPT_T;
++
++typedef enum TNETD73XX_WAKEUP_CTRL_tag
++{
++ WAKEUP_DISABLED = 0,
++ WAKEUP_ENABLED
++} TNETD73XX_WAKEUP_CTRL_T;
++
++typedef enum TNETD73XX_WAKEUP_POLARITY_tag
++{
++ WAKEUP_ACTIVE_HIGH = 0,
++ WAKEUP_ACTIVE_LOW
++} TNETD73XX_WAKEUP_POLARITY_T;
++
++void tnetd73xx_wakeup_ctrl(TNETD73XX_WAKEUP_INTERRUPT_T wakeup_int,
++ TNETD73XX_WAKEUP_CTRL_T wakeup_ctrl,
++ TNETD73XX_WAKEUP_POLARITY_T wakeup_polarity);
++
++/*****************************************************************************
++ * FSER Control
++ *****************************************************************************/
+
-+#define VMAC_MDIOCONTROL(X) (*(volatile unsigned int *)(X + 0x00000380))
-+#define VMAC_MDIOUSERACCESS(X) (*(volatile unsigned int *)(X +0x00000384))
-+#define VMAC_MDIOACK(X) (*(volatile unsigned int *)(X + 0x00000388))
-+#define VMAC_MDIOLINK(X) (*(volatile unsigned int *)(X + 0x0000038C))
-+#define VMAC_MDIOMACPHY(X) (*(volatile unsigned int *)(X + 0x00000390))
++typedef enum TNETD73XX_FSER_MODE_tag
++{
++ FSER_I2C = 0,
++ FSER_UART = 1
++} TNETD73XX_FSER_MODE_T;
+
-+#define VMAC_STATS_BASE(X) (X + 0x00000400)
++void tnetd73xx_fser_ctrl(TNETD73XX_FSER_MODE_T fser_mode);
+
-+#endif __AVALANCHE_REGS_H
++/*****************************************************************************
++ * Clock Control
++ *****************************************************************************/
+
++#define CLK_MHZ(x) ( (x) * 1000000 )
+
++typedef enum TNETD73XX_CLKC_ID_tag
++{
++ CLKC_SYS = 0,
++ CLKC_MIPS,
++ CLKC_USB,
++ CLKC_ADSLSS
++} TNETD73XX_CLKC_ID_T;
+
++void tnetd73xx_clkc_init(__u32 afeclk, __u32 refclk, __u32 xtal3in);
++TNETD73XX_ERR tnetd73xx_clkc_set_freq(TNETD73XX_CLKC_ID_T clk_id, __u32 output_freq);
++__u32 tnetd73xx_clkc_get_freq(TNETD73XX_CLKC_ID_T clk_id);
+
++/*****************************************************************************
++ * GPIO Control
++ *****************************************************************************/
+
++typedef enum TNETD73XX_GPIO_PIN_tag
++{
++ GPIO_UART0_RD = 0,
++ GPIO_UART0_TD = 1,
++ GPIO_UART0_RTS = 2,
++ GPIO_UART0_CTS = 3,
++ GPIO_FSER_CLK = 4,
++ GPIO_FSER_D = 5,
++ GPIO_EXT_AFE_SCLK = 6,
++ GPIO_EXT_AFE_TX_FS = 7,
++ GPIO_EXT_AFE_TXD = 8,
++ GPIO_EXT_AFE_RS_FS = 9,
++ GPIO_EXT_AFE_RXD1 = 10,
++ GPIO_EXT_AFE_RXD0 = 11,
++ GPIO_EXT_AFE_CDIN = 12,
++ GPIO_EXT_AFE_CDOUT = 13,
++ GPIO_EPHY_SPEED100 = 14,
++ GPIO_EPHY_LINKON = 15,
++ GPIO_EPHY_ACTIVITY = 16,
++ GPIO_EPHY_FDUPLEX = 17,
++ GPIO_EINT0 = 18,
++ GPIO_EINT1 = 19,
++ GPIO_MBSP0_TCLK = 20,
++ GPIO_MBSP0_RCLK = 21,
++ GPIO_MBSP0_RD = 22,
++ GPIO_MBSP0_TD = 23,
++ GPIO_MBSP0_RFS = 24,
++ GPIO_MBSP0_TFS = 25,
++ GPIO_MII_DIO = 26,
++ GPIO_MII_DCLK = 27,
++} TNETD73XX_GPIO_PIN_T;
+
-diff -urN linux.old/include/asm-mips/ar7/if_port.h linux.dev/include/asm-mips/ar7/if_port.h
---- linux.old/include/asm-mips/ar7/if_port.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/include/asm-mips/ar7/if_port.h 2005-07-12 02:59:26.201667160 +0200
-@@ -0,0 +1,26 @@
-+/*******************************************************************************
-+ * FILE PURPOSE: Interface port id Header file
-+ *******************************************************************************
-+ * FILE NAME: if_port.h
-+ *
-+ * DESCRIPTION: Header file carrying information about port ids of interfaces
-+ *
-+ *
-+ * (C) Copyright 2003, Texas Instruments, Inc
-+ ******************************************************************************/
-+#ifndef _IF_PORT_H_
-+#define _IF_PORT_H_
++typedef enum TNETD73XX_GPIO_PIN_MODE_tag
++{
++ FUNCTIONAL_PIN = 0,
++ GPIO_PIN = 1
++} TNETD73XX_GPIO_PIN_MODE_T;
+
-+#define AVALANCHE_CPMAC_LOW_PORT_ID 0
-+#define AVALANCHE_CPMAC_HIGH_PORT_ID 1
-+#define AVALANCHE_USB_PORT_ID 2
-+#define AVALANCHE_WLAN_PORT_ID 3
++typedef enum TNETD73XX_GPIO_PIN_DIRECTION_tag
++{
++ GPIO_OUTPUT_PIN = 0,
++ GPIO_INPUT_PIN = 1
++} TNETD73XX_GPIO_PIN_DIRECTION_T;
++
++void tnetd73xx_gpio_init(void);
++void tnetd73xx_gpio_ctrl(TNETD73XX_GPIO_PIN_T gpio_pin,
++ TNETD73XX_GPIO_PIN_MODE_T pin_mode,
++ TNETD73XX_GPIO_PIN_DIRECTION_T pin_direction);
++void tnetd73xx_gpio_out(TNETD73XX_GPIO_PIN_T gpio_pin, int value);
++int tnetd73xx_gpio_in(TNETD73XX_GPIO_PIN_T gpio_pin);
+
++/* TNETD73XX Revision */
++__u32 tnetd73xx_get_revision(void);
+
-+#define AVALANCHE_MARVELL_BASE_PORT_ID 4
++#endif /* __TNETD73XX_MISC_H__ */
+diff -urN linux.old/include/asm-mips/ar7/vlynq.h linux.dev/include/asm-mips/ar7/vlynq.h
+--- linux.old/include/asm-mips/ar7/vlynq.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/include/asm-mips/ar7/vlynq.h 2005-11-10 01:10:46.095590250 +0100
+@@ -0,0 +1,610 @@
++/***************************************************************************
++**+----------------------------------------------------------------------+**
++**| **** |**
++**| **** |**
++**| ******o*** |**
++**| ********_///_**** |**
++**| ***** /_//_/ **** |**
++**| ** ** (__/ **** |**
++**| ********* |**
++**| **** |**
++**| *** |**
++**| |**
++**| Copyright (c) 2003 Texas Instruments Incorporated |**
++**| ALL RIGHTS RESERVED |**
++**| |**
++**| Permission is hereby granted to licensees of Texas Instruments |**
++**| Incorporated (TI) products to use this computer program for the sole |**
++**| purpose of implementing a licensee product based on TI products. |**
++**| No other rights to reproduce, use, or disseminate this computer |**
++**| program, whether in part or in whole, are granted. |**
++**| |**
++**| TI makes no representation or warranties with respect to the |**
++**| performance of this computer program, and specifically disclaims |**
++**| any responsibility for any damages, special or consequential, |**
++**| connected with the use of this program. |**
++**| |**
++**+----------------------------------------------------------------------+**
++***************************************************************************/
++
++/*********************************************************************************
++ * ------------------------------------------------------------------------------
++ * Module : vlynq_hal.h
++ * Description :
++ * This header file provides the set of functions exported by the
++ * VLYNQ HAL. This file is included from the SOC specific VLYNQ driver wrapper.
++ * ------------------------------------------------------------------------------
++ *********************************************************************************/
++
++#ifndef _VLYNQ_HAL_H_
++#define _VLYNQ_HAL_H_
++
++/* Enable/Disable debug feature */
++#undef VLYNQ_DEBUG
++
++#ifdef VLYNQ_DEBUG /* This needs to be OS abstracted - for testing use vxworks/linux calls */
++#define debugPrint(format,args...)
++#else
++#define debugPrint(format,args...)
++#endif
+
-+/* The marvell ports occupy port ids from 4 to 8 */
-+/* so the next port id number should start at 9 */
++ /* number of VLYNQ memory regions supported */
++#define VLYNQ_MAX_MEMORY_REGIONS 0x04
++
++ /* Max.number of external interrupt inputs supported by VLYNQ module */
++#define VLYNQ_IVR_MAXIVR 0x08
+
++#define VLYNQ_CLK_DIV_MAX 0x08
++#define VLYNQ_CLK_DIV_MIN 0x01
+
-+#endif /* _IF_PORT_H_ */
-diff -urN linux.old/include/asm-mips/ar7/sangam_boards.h linux.dev/include/asm-mips/ar7/sangam_boards.h
---- linux.old/include/asm-mips/ar7/sangam_boards.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/include/asm-mips/ar7/sangam_boards.h 2005-07-12 02:59:26.201667160 +0200
-@@ -0,0 +1,77 @@
-+#ifndef _SANGAM_BOARDS_H
-+#define _SANGAM_BOARDS_H
+
-+// Let us define board specific information here.
++/*** the total number of entries allocated for ICB would be
++ * 32(for 32 bits in IntPending register) + VLYNQ_IVR_CHAIN_SLOTS*/
++#define VLYNQ_IVR_CHAIN_SLOTS 10
+
+
-+#if defined(CONFIG_AR7DB)
++/* Error defines */
++#define VLYNQ_SUCCESS 0
+
-+#define AFECLK_FREQ 35328000
-+#define REFCLK_FREQ 25000000
-+#define OSC3_FREQ 24000000
-+#define AVALANCHE_LOW_CPMAC_PHY_MASK 0x80000000
-+#define AVALANCHE_HIGH_CPMAC_PHY_MASK 0x55555555
-+#define AVALANCHE_LOW_CPMAC_MDIX_MASK 0x80000000
++#define VLYNQ_ERRCODE_BASE 0 /* Chosen by system */
++#define VLYNQ_INVALID_ARG -(VLYNQ_ERRCODE_BASE+1)
++#define VLYNQ_INVALID_DRV_STATE -(VLYNQ_ERRCODE_BASE+2)
++#define VLYNQ_INT_CONFIG_ERR -(VLYNQ_ERRCODE_BASE+3)
++#define VLYNQ_LINK_DOWN -(VLYNQ_ERRCODE_BASE+4)
++#define VLYNQ_MEMALLOC_FAIL -(VLYNQ_ERRCODE_BASE+5)
++#define VLYNQ_ISR_NON_EXISTENT -(VLYNQ_ERRCODE_BASE+6)
++#define VLYNQ_INTVEC_MAP_NOT_FOUND -(VLYNQ_ERRCODE_BASE+7)
+
-+#endif
++/* Vlynq Defines and Macros */
+
++#define VLYNQ_NUM_INT_BITS 32 /* 32 bit interrupt staus register */
+
-+#if defined(CONFIG_AR7RD)
-+#define AFECLK_FREQ 35328000
-+#define REFCLK_FREQ 25000000
-+#define OSC3_FREQ 24000000
-+#define AVALANCHE_LOW_CPMAC_PHY_MASK 0x80000000
-+#define AVALANCHE_HIGH_CPMAC_PHY_MASK 0x2
-+#define AVALANCHE_LOW_CPMAC_MDIX_MASK 0x80000000
-+#endif
++/* Base address of module */
++#define VLYNQ_BASE (pdev->module_base)
+
++#define VLYNQ_REMOTE_REGS_OFFSET 0x0080
+
-+#if defined(CONFIG_AR7WI)
-+#define AFECLK_FREQ 35328000
-+#define REFCLK_FREQ 25000000
-+#define OSC3_FREQ 24000000
-+#define AVALANCHE_LOW_CPMAC_PHY_MASK 0x80000000
-+#define AVALANCHE_HIGH_CPMAC_PHY_MASK 0x2
-+#define AVALANCHE_LOW_CPMAC_MDIX_MASK 0x80000000
-+#endif
++#define VLYNQ_REV_OFFSET 0x0000
++#define VLYNQ_CTRL_OFFSET 0x0004
++#define VLYNQ_STATUS_OFFSET 0x0008
++#define VLYNQ_INT_STAT_OFFSET 0x0010
++#define VLYNQ_INT_PEND_OFFSET 0x0014
++#define VLYNQ_INT_PTR_OFFSET 0x0018
++#define VLYNQ_TXMAP_OFFSET 0x001c
+
++#define VLYNQ_RX0MAP_SIZE_REG_OFFSET 0x0020
++#define VLYNQ_RX0MAP_OFFSET_REG_OFFSET 0x0024
+
-+#if defined(CONFIG_AR7V)
-+#define AFECLK_FREQ 35328000
-+#define REFCLK_FREQ 25000000
-+#define OSC3_FREQ 24000000
-+#define AVALANCHE_LOW_CPMAC_PHY_MASK 0x80000000
-+#define AVALANCHE_HIGH_CPMAC_PHY_MASK 0x2
-+#define AVALANCHE_LOW_CPMAC_MDIX_MASK 0x80000000
-+#endif
++#define VLYNQ_CHIP_VER_OFFSET 0x0040
++#define VLYNQ_IVR_REGS_OFFSET 0x0060
+
++#define VLYNQ_INT_PENDING_REG_PTR 0x14
++#define VLYNQ_R_INT_PENDING_REG_PTR VLYNQ_REMOTE_REGS_OFFSET + 0x14
+
-+#if defined(CONFIG_AR7WRD)
-+#define AFECLK_FREQ 35328000
-+#define REFCLK_FREQ 25000000
-+#define OSC3_FREQ 24000000
-+#define AVALANCHE_LOW_CPMAC_PHY_MASK 0x80000000
-+#define AVALANCHE_HIGH_CPMAC_PHY_MASK 0x00010000
-+#define AVALANCHE_LOW_CPMAC_MDIX_MASK 0x80000000
-+#endif
++#define VLYNQ_REV_REG *((volatile unsigned int *)(VLYNQ_BASE+VLYNQ_REV_OFFSET))
++#define VLYNQ_CTRL_REG *((volatile unsigned int *)(VLYNQ_BASE+VLYNQ_CTRL_OFFSET))
++#define VLYNQ_STATUS_REG *((volatile unsigned int *)(VLYNQ_BASE+VLYNQ_STATUS_OFFSET))
++#define VLYNQ_INT_STAT_REG *((volatile unsigned int *)(VLYNQ_BASE+VLYNQ_INT_STAT_OFFSET))
++#define VLYNQ_INT_PEND_REG *((volatile unsigned int *)(VLYNQ_BASE+VLYNQ_INT_PEND_OFFSET))
++#define VLYNQ_INT_PTR_REG *((volatile unsigned int *)(VLYNQ_BASE+VLYNQ_INT_PTR_OFFSET))
++#define VLYNQ_TXMAP_REG *((volatile unsigned int *)(VLYNQ_BASE+VLYNQ_TXMAP_OFFSET))
+
++/** map takes on values between 1 to VLYNQ_MAX_MEMORY_REGIONS **/
++#define VLYNQ_RXMAP_SIZE_REG(map) \
++ *((volatile unsigned int *)(VLYNQ_BASE+VLYNQ_RX0MAP_SIZE_REG_OFFSET+( (map-1)<<3)))
++
++/** map takes on values between 1 to VLYNQ_MAX_MEMORY_REGIONS **/
++#define VLYNQ_RXMAP_OFFSET_REG(map) \
++ *((volatile unsigned int *)(VLYNQ_BASE+VLYNQ_RX0MAP_OFFSET_REG_OFFSET+( (map-1)<<3)))
+
-+#if defined(CONFIG_AR7VWI)
-+#define AFECLK_FREQ 35328000
-+#define REFCLK_FREQ 25000000
-+#define OSC3_FREQ 24000000
-+#define AVALANCHE_LOW_CPMAC_PHY_MASK 0x80000000
-+#define AVALANCHE_HIGH_CPMAC_PHY_MASK 0x00010000
-+#define AVALANCHE_LOW_CPMAC_MDIX_MASK 0x80000000
-+#endif
++#define VLYNQ_CHIP_VER_REG *((volatile unsigned int *)(VLYNQ_BASE+VLYNQ_CHIP_VER_OFFSET))
+
++/* 0 =< ivr <= 31; currently ivr < VLYNQ_IVR_MAXIVR=8) */
++#define VLYNQ_IVR_OFFSET(ivr) \
++ (VLYNQ_BASE + VLYNQ_IVR_REGS_OFFSET +((((unsigned)(ivr)) & 31) & ~3) )
+
-+#if defined CONFIG_SEAD2
-+#define AVALANCHE_LOW_CPMAC_PHY_MASK 0xAAAAAAAA
-+#define AVALANCHE_HIGH_CPMAC_PHY_MASK 0x55555555
-+#define AVALANCHE_LOW_CPMAC_MDIX_MASK 0
-+#include <asm/mips-boards/sead.h>
-+#endif
++#define VLYNQ_IVR_03TO00_REG *((volatile unsigned int*) (VLYNQ_IVR_OFFSET(0)) )
++#define VLYNQ_IVR_07TO04_REG *((volatile unsigned int*) (VLYNQ_IVR_OFFSET(4)) )
++/*** Can be extended for 11TO08...31TO28 when all 31 are supported**/
+
++#define VLYNQ_IVR_INTEN(ivr) (((unsigned int)(0x80)) << ((((unsigned)(ivr)) % 4) * 8))
++#define VLYNQ_IVR_INTTYPE(ivr) (((unsigned int)(0x40)) << ((((unsigned)(ivr)) % 4) * 8))
++#define VLYNQ_IVR_INTPOL(ivr) (((unsigned int)(0x20)) << ((((unsigned)(ivr)) % 4) * 8))
++#define VLYNQ_IVR_INTVEC(ivr) (((unsigned int)(0x1F)) << ((((unsigned)(ivr)) % 4) * 8))
++#define VLYNQ_IVR_INTALL(ivr) (((unsigned int)(0xFF)) << ((((unsigned)(ivr)) % 4) * 8))
+
-+#endif
-diff -urN linux.old/include/asm-mips/ar7/sangam.h linux.dev/include/asm-mips/ar7/sangam.h
---- linux.old/include/asm-mips/ar7/sangam.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/include/asm-mips/ar7/sangam.h 2005-07-12 02:59:26.201667160 +0200
-@@ -0,0 +1,180 @@
-+#ifndef _SANGAM_H_
-+#define _SANGAM_H_
+
-+#include <linux/config.h>
-+#include <asm/addrspace.h>
+
-+/*----------------------------------------------------
-+ * Sangam's Module Base Addresses
-+ *--------------------------------------------------*/
-+#define AVALANCHE_ADSL_SUB_SYS_MEM_BASE (KSEG1ADDR(0x01000000)) /* AVALANCHE ADSL Mem Base */
-+#define AVALANCHE_BROADBAND_INTERFACE__BASE (KSEG1ADDR(0x02000000)) /* AVALANCHE BBIF */
-+#define AVALANCHE_ATM_SAR_BASE (KSEG1ADDR(0x03000000)) /* AVALANCHE ATM SAR */
-+#define AVALANCHE_USB_SLAVE_BASE (KSEG1ADDR(0x03400000)) /* AVALANCHE USB SLAVE */
-+#define AVALANCHE_LOW_VLYNQ_MEM_MAP_BASE (KSEG1ADDR(0x04000000)) /* AVALANCHE VLYNQ 0 Mem map */
-+#define AVALANCHE_LOW_CPMAC_BASE (KSEG1ADDR(0x08610000)) /* AVALANCHE CPMAC 0 */
-+#define AVALANCHE_EMIF_CONTROL_BASE (KSEG1ADDR(0x08610800)) /* AVALANCHE EMIF */
-+#define AVALANCHE_GPIO_BASE (KSEG1ADDR(0x08610900)) /* AVALANCHE GPIO */
-+#define AVALANCHE_CLOCK_CONTROL_BASE (KSEG1ADDR(0x08610A00)) /* AVALANCHE Clock Control */
-+#define AVALANCHE_WATCHDOG_TIMER_BASE (KSEG1ADDR(0x08610B00)) /* AVALANCHE Watch Dog Timer */
-+#define AVALANCHE_TIMER0_BASE (KSEG1ADDR(0x08610C00)) /* AVALANCHE Timer 1 */
-+#define AVALANCHE_TIMER1_BASE (KSEG1ADDR(0x08610D00)) /* AVALANCHE Timer 2 */
-+#define AVALANCHE_UART0_REGS_BASE (KSEG1ADDR(0x08610E00)) /* AVALANCHE UART 0 */
-+#define AVALANCHE_UART1_REGS_BASE (KSEG1ADDR(0x08610F00)) /* AVALANCHE UART 0 */
-+#define AVALANCHE_I2C_BASE (KSEG1ADDR(0x08611000)) /* AVALANCHE I2C */
-+#define AVALANCHE_USB_SLAVE_CONTROL_BASE (KSEG1ADDR(0x08611200)) /* AVALANCHE USB DMA */
-+#define AVALANCHE_MCDMA0_CTRL_BASE (KSEG1ADDR(0x08611400)) /* AVALANCHE MC DMA 0 (channels 0-3) */
-+#define AVALANCHE_RESET_CONTROL_BASE (KSEG1ADDR(0x08611600)) /* AVALANCHE Reset Control */
-+#define AVALANCHE_BIST_CONTROL_BASE (KSEG1ADDR(0x08611700)) /* AVALANCHE BIST Control */
-+#define AVALANCHE_LOW_VLYNQ_CONTROL_BASE (KSEG1ADDR(0x08611800)) /* AVALANCHE VLYNQ0 Control */
-+#define AVALANCHE_DEVICE_CONFIG_LATCH_BASE (KSEG1ADDR(0x08611A00)) /* AVALANCHE Device Config Latch */
-+#define AVALANCHE_HIGH_VLYNQ_CONTROL_BASE (KSEG1ADDR(0x08611C00)) /* AVALANCHE VLYNQ1 Control */
-+#define AVALANCHE_MDIO_BASE (KSEG1ADDR(0x08611E00)) /* AVALANCHE MDIO */
-+#define AVALANCHE_FSER_BASE (KSEG1ADDR(0x08612000)) /* AVALANCHE FSER base */
-+#define AVALANCHE_INTC_BASE (KSEG1ADDR(0x08612400)) /* AVALANCHE INTC */
-+#define AVALANCHE_HIGH_CPMAC_BASE (KSEG1ADDR(0x08612800)) /* AVALANCHE CPMAC 1 */
-+#define AVALANCHE_HIGH_VLYNQ_MEM_MAP_BASE (KSEG1ADDR(0x0C000000)) /* AVALANCHE VLYNQ 1 Mem map */
++/*********************************
++ * Remote VLYNQ register set *
++ *********************************/
+
-+#define AVALANCHE_SDRAM_BASE 0x14000000UL
++#define VLYNQ_R_REV_OFFSET 0x0080
++#define VLYNQ_R_CTRL_OFFSET 0x0084
++#define VLYNQ_R_STATUS_OFFSET 0x0088
++#define VLYNQ_R_INT_STAT_OFFSET 0x0090
++#define VLYNQ_R_INT_PEND_OFFSET 0x0094
++#define VLYNQ_R_INT_PTR_OFFSET 0x0098
++#define VLYNQ_R_TXMAP_OFFSET 0x009c
+
++#define VLYNQ_R_RX0MAP_SIZE_REG_OFFSET 0x00A0
++#define VLYNQ_R_RX0MAP_OFFSET_REG_OFFSET 0x00A4
+
-+/*----------------------------------------------------
-+ * Sangam Interrupt Map (Primary Interrupts)
-+ *--------------------------------------------------*/
++#define VLYNQ_R_CHIP_VER_OFFSET 0x00C0
++#define VLYNQ_R_IVR_REGS_OFFSET 0x00E0
+
-+#define AVALANCHE_UNIFIED_SECONDARY_INT 0
-+#define AVALANCHE_EXT_INT_0 1
-+#define AVALANCHE_EXT_INT_1 2
-+/* Line# 3 to 4 are reserved */
-+#define AVALANCHE_TIMER_0_INT 5
-+#define AVALANCHE_TIMER_1_INT 6
-+#define AVALANCHE_UART0_INT 7
-+#define AVALANCHE_UART1_INT 8
-+#define AVALANCHE_DMA_INT0 9
-+#define AVALANCHE_DMA_INT1 10
-+/* Line# 11 to 14 are reserved */
-+#define AVALANCHE_ATM_SAR_INT 15
-+/* Line# 16 to 18 are reserved */
-+#define AVALANCHE_LOW_CPMAC_INT 19
-+/* Line# 20 is reserved */
-+#define AVALANCHE_LOW_VLYNQ_INT 21
-+#define AVALANCHE_CODEC_WAKEUP_INT 22
-+/* Line# 23 is reserved */
-+#define AVALANCHE_USB_SLAVE_INT 24
-+#define AVALANCHE_HIGH_VLYNQ_INT 25
-+/* Line# 26 to 27 are reserved */
-+#define AVALANCHE_UNIFIED_PHY_INT 28
-+#define AVALANCHE_I2C_INT 29
-+#define AVALANCHE_DMA_INT2 30
-+#define AVALANCHE_DMA_INT3 31
-+/* Line# 32 is reserved */
-+#define AVALANCHE_HIGH_CPMAC_INT 33
-+/* Line# 34 to 36 is reserved */
-+#define AVALANCHE_VDMA_VT_RX_INT 37
-+#define AVALANCHE_VDMA_VT_TX_INT 38
-+#define AVALANCHE_ADSL_SUB_SYSTEM_INT 39
++#define VLYNQ_R_REV_REG *((volatile unsigned int *)(VLYNQ_BASE + VLYNQ_R_REV_OFFSET))
++#define VLYNQ_R_CTRL_REG *((volatile unsigned int *)(VLYNQ_BASE + VLYNQ_R_CTRL_OFFSET))
++#define VLYNQ_R_STATUS_REG *((volatile unsigned int *)(VLYNQ_BASE + VLYNQ_R_STATUS_OFFSET))
++#define VLYNQ_R_INT_STAT_REG *((volatile unsigned int *)(VLYNQ_BASE + VLYNQ_R_INT_STAT_OFFSET))
++#define VLYNQ_R_INT_PEND_REG *((volatile unsigned int *)(VLYNQ_BASE + VLYNQ_R_INT_PEND_OFFSET))
++#define VLYNQ_R_INT_PTR_REG *((volatile unsigned int *)(VLYNQ_BASE + VLYNQ_R_INT_PTR_OFFSET))
++#define VLYNQ_R_TXMAP_REG *((volatile unsigned int *)(VLYNQ_BASE + VLYNQ_R_TXMAP_OFFSET))
++
++/** map takes on values between 1 to VLYNQ_MAX_MEMORY_REGIONS **/
++#define VLYNQ_R_RXMAP_SIZE_REG(map) \
++ *((volatile unsigned int *)(VLYNQ_BASE + VLYNQ_R_RX0MAP_SIZE_REG_OFFSET + ((map-1)<<3)))
++
++/** map takes on values between 1 to VLYNQ_MAX_MEMORY_REGIONS **/
++#define VLYNQ_R_RXMAP_OFFSET_REG(map) \
++ *((volatile unsigned int *)(VLYNQ_BASE + VLYNQ_R_RX0MAP_OFFSET_REG_OFFSET + ((map-1)<<3)))
++
++#define VLYNQ_R_CHIP_VER_REG *((volatile unsigned int *)(VLYNQ_BASE + VLYNQ_R_CHIP_VER_OFFSET)
+
++#define VLYNQ_R_IVR_OFFSET(ivr) \
++ (VLYNQ_BASE + VLYNQ_R_IVR_REGS_OFFSET +((((unsigned)(ivr)) & 31) & ~3))
++
+
-+#define AVALANCHE_EMIF_INT 47
++/*** Can be extended for 11TO08...31TO28 when all 31 are supported**/
++#define VLYNQ_R_IVR_03TO00_REG *((volatile unsigned int*) (VLYNQ_R_IVR_OFFSET(0)) )
++#define VLYNQ_R_IVR_07TO04_REG *((volatile unsigned int*) (VLYNQ_R_IVR_OFFSET(4)) )
+
+
++/****End of remote register set definition******/
+
-+/*-----------------------------------------------------------
-+ * Sangam's Reset Bits
-+ *---------------------------------------------------------*/
+
-+#define AVALANCHE_UART0_RESET_BIT 0
-+#define AVALANCHE_UART1_RESET_BIT 1
-+#define AVALANCHE_I2C_RESET_BIT 2
-+#define AVALANCHE_TIMER0_RESET_BIT 3
-+#define AVALANCHE_TIMER1_RESET_BIT 4
-+/* Reset bit 5 is reserved. */
-+#define AVALANCHE_GPIO_RESET_BIT 6
-+#define AVALANCHE_ADSL_SUB_SYS_RESET_BIT 7
-+#define AVALANCHE_USB_SLAVE_RESET_BIT 8
-+#define AVALANCHE_ATM_SAR_RESET_BIT 9
-+/* Reset bit 10 is reserved. */
-+#define AVALANCHE_VDMA_VT_RESET_BIT 11
-+#define AVALANCHE_FSER_RESET_BIT 12
-+/* Reset bit 13 to 15 are reserved */
-+#define AVALANCHE_HIGH_VLYNQ_RESET_BIT 16
-+#define AVALANCHE_LOW_CPMAC_RESET_BIT 17
-+#define AVALANCHE_MCDMA_RESET_BIT 18
-+#define AVALANCHE_BIST_RESET_BIT 19
-+#define AVALANCHE_LOW_VLYNQ_RESET_BIT 20
-+#define AVALANCHE_HIGH_CPMAC_RESET_BIT 21
-+#define AVALANCHE_MDIO_RESET_BIT 22
-+#define AVALANCHE_ADSL_SUB_SYS_DSP_RESET_BIT 23
-+/* Reset bit 24 to 25 are reserved */
-+#define AVALANCHE_LOW_EPHY_RESET_BIT 26
-+/* Reset bit 27 to 31 are reserved */
++/*** Masks for individual register fields ***/
+
++#define VLYNQ_MODULE_ID_MASK 0xffff0000
++#define VLYNQ_MAJOR_REV_MASK 0x0000ff00
++#define VLYNQ_MINOR_REV_MASK 0x000000ff
+
-+#define AVALANCHE_POWER_MODULE_USBSP 0
-+#define AVALANCHE_POWER_MODULE_WDTP 1
-+#define AVALANCHE_POWER_MODULE_UT0P 2
-+#define AVALANCHE_POWER_MODULE_UT1P 3
-+#define AVALANCHE_POWER_MODULE_IICP 4
-+#define AVALANCHE_POWER_MODULE_VDMAP 5
-+#define AVALANCHE_POWER_MODULE_GPIOP 6
-+#define AVALANCHE_POWER_MODULE_VLYNQ1P 7
-+#define AVALANCHE_POWER_MODULE_SARP 8
-+#define AVALANCHE_POWER_MODULE_ADSLP 9
-+#define AVALANCHE_POWER_MODULE_EMIFP 10
-+#define AVALANCHE_POWER_MODULE_ADSPP 12
-+#define AVALANCHE_POWER_MODULE_RAMP 13
-+#define AVALANCHE_POWER_MODULE_ROMP 14
-+#define AVALANCHE_POWER_MODULE_DMAP 15
-+#define AVALANCHE_POWER_MODULE_BISTP 16
-+#define AVALANCHE_POWER_MODULE_TIMER0P 18
-+#define AVALANCHE_POWER_MODULE_TIMER1P 19
-+#define AVALANCHE_POWER_MODULE_EMAC0P 20
-+#define AVALANCHE_POWER_MODULE_EMAC1P 22
-+#define AVALANCHE_POWER_MODULE_EPHYP 24
-+#define AVALANCHE_POWER_MODULE_VLYNQ0P 27
++
++#define VLYNQ_CTL_ILOOP_MASK 0x00000002
++#define VLYNQ_CTL_INT2CFG_MASK 0x00000080
++#define VLYNQ_CTL_INTVEC_MASK 0x00001f00
++#define VLYNQ_CTL_INTEN_MASK 0x00002000
++#define VLYNQ_CTL_INTLOCAL_MASK 0x00004000
++#define VLYNQ_CTL_CLKDIR_MASK 0x00008000
++#define VLYNQ_CTL_CLKDIV_MASK 0x00070000
++#define VLYNQ_CTL_MODE_MASK 0x00e00000
++
++
++#define VLYNQ_STS_LINK_MASK 0x00000001 /* Link is active */
++#define VLYNQ_STS_MPEND_MASK 0x00000002 /* Pending master requests */
++#define VLYNQ_STS_SPEND_MASK 0x00000004 /* Pending slave requests */
++#define VLYNQ_STS_NFEMPTY0_MASK 0x00000008 /* Master data FIFO not empty */
++#define VLYNQ_STS_NFEMPTY1_MASK 0x00000010 /* Master command FIFO not empty */
++#define VLYNQ_STS_NFEMPTY2_MASK 0x00000020 /* Slave data FIFO not empty */
++#define VLYNQ_STS_NFEMPTY3_MASK 0x00000040 /* Slave command FIFO not empty */
++#define VLYNQ_STS_LERROR_MASK 0x00000080 /* Local error, w/c */
++#define VLYNQ_STS_RERROR_MASK 0x00000100 /* remote error w/c */
++#define VLYNQ_STS_OFLOW_MASK 0x00000200
++#define VLYNQ_STS_IFLOW_MASK 0x00000400
++#define VLYNQ_STS_MODESUP_MASK 0x00E00000 /* Highest mode supported */
++#define VLYNQ_STS_SWIDTH_MASK 0x07000000 /* Used for reading the width of VLYNQ bus */
++#define VLYNQ_STS_DEBUG_MASK 0xE0000000
++
++#define VLYNQ_CTL_INTVEC_SHIFT 0x08
++#define VLYNQ_CTL_INTEN_SHIFT 0x0D
++#define VLYNQ_CTL_INT2CFG_SHIFT 0x07
++#define VLYNQ_CTL_INTLOCAL_SHIFT 0x0E
++
++#define VLYNQ_CTL_INTFIELDS_CLEAR_MASK 0x7F80
++
++#define VLYNQ_CHIPVER_DEVREV_MASK 0xffff0000
++#define VLYNQ_CHIPVER_DEVID_MASK 0x0000ffff
++
++#define VLYNQ_IVR_INTEN_MASK 0x80
++#define VLYNQ_IVR_INTTYPE_MASK 0x40
++#define VLYNQ_IVR_INTPOL_MASK 0x20
++
++
++/**** Helper macros ****/
++
++#define VLYNQ_RESETCB(arg) \
++ if( pdev->reset_cb != NULL) \
++ { \
++ (pdev->reset_cb)(pdev, (arg)); \
++ }
++
++#define VLYNQ_STATUS_FLD_WIDTH(sts) (((sts) & VLYNQ_STS_SWIDTH_MASK) >> 24 )
++#define VLYNQ_CTL_INTVEC(x) (((x) & 31) << 8 )
+
++#define VLYNQ_INRANGE(x,hi,lo) (((x) <= (hi)) && ((x) >= (lo)))
++#define VLYNQ_OUTRANGE(x,hi,lo) (((x) > (hi)) || ((x) < (lo)))
+
++#define VLYNQ_ALIGN4(x) (x)=(x)&(~3)
+
+
++/*************************************
++ * Enums *
++ *************************************/
+
-+/*
-+ * Sangam board vectors
-+ */
++/* Initialization options define what operations are
++ * undertaken during vlynq module initialization */
++typedef enum
++{
++ /* Init host local memory regions.This allows
++ * local host access remote memory regions */
++ VLYNQ_INIT_LOCAL_MEM_REGIONS = 0x01,
++ /* Init host remote memory regions.This allows
++ * remote device access local memory regions */
++ VLYNQ_INIT_REMOTE_MEM_REGIONS =0x02,
++ /* Init local interrupt config*/
++ VLYNQ_INIT_LOCAL_INTERRUPTS =0x04,
++ /* Init remote interrupt config*/
++ VLYNQ_INIT_REMOTE_INTERRUPTS =0x08,
++ /* Check link during initialization*/
++ VLYNQ_INIT_CHECK_LINK =0x10,
++ /* configure clock during init */
++ VLYNQ_INIT_CONFIG_CLOCK =0x20,
++ /* Clear errors during init */
++ VLYNQ_INIT_CLEAR_ERRORS =0x40,
++ /* All options */
++ VLYNQ_INIT_PERFORM_ALL =0x7F
++}VLYNQ_INIT_OPTIONS;
++
++
++/* VLYNQ_DEV_TYPE identifies local or remote device */
++typedef enum
++{
++ VLYNQ_LOCAL_DVC = 0, /* vlynq local device (SOC's vlynq module) */
++ VLYNQ_REMOTE_DVC = 1 /* vlynq remote device (remote vlynq module) */
++}VLYNQ_DEV_TYPE;
+
-+#define AVALANCHE_VECS (KSEG1ADDR(AVALANCHE_SDRAM_BASE))
-+#define AVALANCHE_VECS_KSEG0 (KSEG0ADDR(AVALANCHE_SDRAM_BASE))
+
-+/*-----------------------------------------------------------------------------
-+ * Sangam's system register.
-+ *
-+ *---------------------------------------------------------------------------*/
-+#define AVALANCHE_DCL_BOOTCR (KSEG1ADDR(0x08611A00))
-+#define AVALANCHE_EMIF_SDRAM_CFG (AVALANCHE_EMIF_CONTROL_BASE + 0x8)
-+#define AVALANCHE_RST_CTRL_PRCR (KSEG1ADDR(0x08611600))
-+#define AVALANCHE_RST_CTRL_SWRCR (KSEG1ADDR(0x08611604))
-+#define AVALANCHE_RST_CTRL_RSR (KSEG1ADDR(0x08611600))
++/* VLYNQ_CLK_SOURCE identifies the vlynq module clock source */
++typedef enum
++{
++ VLYNQ_CLK_SOURCE_NONE = 0, /* do not initialize clock generator*/
++ VLYNQ_CLK_SOURCE_LOCAL = 1, /* clock is generated by local machine */
++ VLYNQ_CLK_SOURCE_REMOTE = 2 /* clock is generated by remote machine */
++}VLYNQ_CLK_SOURCE;
+
-+#define AVALANCHE_POWER_CTRL_PDCR (KSEG1ADDR(0x08610A00))
-+#define AVALANCHE_WAKEUP_CTRL_WKCR (KSEG1ADDR(0x08610A0C))
+
-+#define AVALANCHE_GPIO_DATA_IN (AVALANCHE_GPIO_BASE + 0x0)
-+#define AVALANCHE_GPIO_DATA_OUT (AVALANCHE_GPIO_BASE + 0x4)
-+#define AVALANCHE_GPIO_DIR (AVALANCHE_GPIO_BASE + 0x8)
-+#define AVALANCHE_GPIO_ENBL (AVALANCHE_GPIO_BASE + 0xC)
-+#define AVALANCHE_CVR (AVALANCHE_GPIO_BASE + 0x14)
++/* VLYNQ_DRV_STATE indicates the current driver state */
++typedef enum
++{
++ VLYNQ_DRV_STATE_UNINIT = 0, /* driver is uninitialized */
++ VLYNQ_DRV_STATE_ININIT = 1, /* VLYNQ is being initialized */
++ VLYNQ_DRV_STATE_RUN = 2, /* VLYNQ is running properly */
++ VLYNQ_DRV_STATE_HOLD = 3, /* driver stopped temporarily */
++ VLYNQ_DRV_STATE_ERROR = 4 /* driver stopped on unrecoverable error */
++}VLYNQ_DRV_STATE;
+
-+/*
-+ * Yamon Prom print address.
++
++/* VLYNQ_BUS_WIDTH identifies the vlynq module bus width */
++typedef enum
++{
++ VLYNQ_BUS_WIDTH_3 = 3,
++ VLYNQ_BUS_WIDTH_5 = 5,
++ VLYNQ_BUS_WIDTH_7 = 7,
++ VLYNQ_BUS_WIDTH_9 = 9
++}VLYNQ_BUS_WIDTH;
++
++
++/* VLYNQ_LOCAL_INT_CONFIG indicates whether the local vlynq
++ * interrupts are processed by the host or passed on to the
++ * remote device.
+ */
-+#define AVALANCHE_YAMON_FUNCTION_BASE (KSEG1ADDR(0x10000500))
-+#define AVALANCHE_YAMON_PROM_PRINT_COUNT_ADDR (AVALANCHE_YAMON_FUNCTION_BASE + 0x4) /* print_count function */
-+#define AVALANCHE_YAMON_PROM_PRINT_ADDR (AVALANCHE_YAMON_FUNCTION_BASE + 0x34)
++typedef enum
++{
++ VLYNQ_INT_REMOTE = 0, /* Interrupt packets sent to remote, intlocal=0 */
++ VLYNQ_INT_LOCAL = 1 /* Interrupts are handled locally, intlocal=1 */
++}VLYNQ_LOCAL_INT_CONFIG;
+
-+#define AVALANCHE_BASE_BAUD ( 3686400 / 16 )
+
-+#define AVALANCHE_GPIO_PIN_COUNT 32
-+#define AVALANCHE_GPIO_OFF_MAP {0xF34FFFC0}
++/* VLYNQ_REMOTE_INT_CONFIG indicates whether the remote
++ * interrupts are to be handled by the SOC system ISR
++ * or via the vlynq root ISR
++ */
++typedef enum
++{
++ VLYNQ_INT_ROOT_ISR = 0, /* remote ints handled via vlynq root ISR */
++ VLYNQ_INT_SYSTEM_ISR = 1 /* remote ints handled via system ISR */
++}VLYNQ_REMOTE_INT_CONFIG;
+
-+#include "sangam_boards.h"
+
-+#endif /*_SANGAM_H_ */
-diff -urN linux.old/include/asm-mips/ar7/tnetd73xx_err.h linux.dev/include/asm-mips/ar7/tnetd73xx_err.h
---- linux.old/include/asm-mips/ar7/tnetd73xx_err.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/include/asm-mips/ar7/tnetd73xx_err.h 2005-07-12 03:01:26.109438408 +0200
-@@ -0,0 +1,42 @@
-+/******************************************************************************
-+ * FILE PURPOSE: TNETD73xx Error Definations Header File
-+ ******************************************************************************
-+ * FILE NAME: tnetd73xx_err.h
-+ *
-+ * DESCRIPTION: Error definations for TNETD73XX
-+ *
-+ * REVISION HISTORY:
-+ * 27 Nov 02 - PSP TII
-+ *
-+ * (C) Copyright 2002, Texas Instruments, Inc
-+ *******************************************************************************/
++/* VLYNQ_INTR_POLARITY - vlynq interrupt polarity setting */
++typedef enum
++{
++ VLYNQ_INTR_ACTIVE_HIGH = 0,
++ VLYNQ_INTR_ACTIVE_LOW = 1
++}VLYNQ_INTR_POLARITY;
+
-+
-+#ifndef __TNETD73XX_ERR_H__
-+#define __TNETD73XX_ERR_H__
+
-+typedef enum TNETD73XX_ERR_t
++/* VLYNQ_INTR_TYPE - vlynq interrupt type */
++typedef enum
+{
-+ TNETD73XX_ERR_OK = 0, /* OK or SUCCESS */
-+ TNETD73XX_ERR_ERROR = -1, /* Unspecified/Generic ERROR */
++ VLYNQ_INTR_LEVEL = 0,
++ VLYNQ_INTR_PULSED = 1
++}VLYNQ_INTR_TYPE;
+
-+ /* Pointers and args */
-+ TNETD73XX_ERR_INVARG = -2, /* Invaild argument to the call */
-+ TNETD73XX_ERR_NULLPTR = -3, /* NULL pointer */
-+ TNETD73XX_ERR_BADPTR = -4, /* Bad (out of mem) pointer */
+
-+ /* Memory issues */
-+ TNETD73XX_ERR_ALLOC_FAIL = -10, /* allocation failed */
-+ TNETD73XX_ERR_FREE_FAIL = -11, /* free failed */
-+ TNETD73XX_ERR_MEM_CORRUPT = -12, /* corrupted memory */
-+ TNETD73XX_ERR_BUF_LINK = -13, /* buffer linking failed */
++/* VLYNQ_RESET_MODE - vlynq reset mode */
++typedef enum
++{
++ VLYNQ_RESET_ASSERT, /* hold device in reset state */
++ VLYNQ_RESET_DEASSERT, /* release device from reset state */
++ VLYNQ_RESET_INITFAIL, /* handle the device in case driver initialization fails */
++ VLYNQ_RESET_LINKESTABLISH, /* handle the device in case driver established link */
++ VLYNQ_RESET_INITFAIL2, /* Driver initialization failed but VLYNQ link exist. */
++ VLYNQ_RESET_INITOK /* Driver initialization finished OK. */
++}VLYNQ_RESET_MODE;
++
+
-+ /* Device issues */
-+ TNETD73XX_ERR_DEVICE_TIMEOUT = -20, /* device timeout on read/write */
-+ TNETD73XX_ERR_DEVICE_MALFUNC = -21, /* device malfunction */
+
-+ TNETD73XX_ERR_INVID = -30 /* Invalid ID */
++/*************************************
++ * Typedefs *
++ *************************************/
+
-+} TNETD73XX_ERR;
++struct VLYNQ_DEV_t; /*forward declaration*/
+
-+#endif /* __TNETD73XX_ERR_H__ */
-diff -urN linux.old/include/asm-mips/ar7/tnetd73xx.h linux.dev/include/asm-mips/ar7/tnetd73xx.h
---- linux.old/include/asm-mips/ar7/tnetd73xx.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/include/asm-mips/ar7/tnetd73xx.h 2005-07-12 03:01:26.110438256 +0200
-@@ -0,0 +1,338 @@
-+/******************************************************************************
-+ * FILE PURPOSE: TNETD73xx Common Header File
-+ ******************************************************************************
-+ * FILE NAME: tnetd73xx.h
-+ *
-+ * DESCRIPTION: shared typedef's, constants and API for TNETD73xx
-+ *
-+ * REVISION HISTORY:
-+ * 27 Nov 02 - PSP TII
-+ *
-+ * (C) Copyright 2002, Texas Instruments, Inc
-+ *******************************************************************************/
++/*--------Function Pointers defintions -----------*/
+
-+/*
-+ *
-+ *
-+ * These are const, typedef, and api definitions for tnetd73xx.
-+ *
-+ * NOTES:
-+ * 1. This file may be included into both C and Assembly files.
-+ * - for .s files, please do #define _ASMLANGUAGE in your ASM file to
-+ * avoid C data types (typedefs) below;
-+ * - for .c files, you don't have to do anything special.
-+ *
-+ * 2. This file has a number of sections for each SOC subsystem. When adding
-+ * a new constant, find the subsystem you are working on and follow the
-+ * name pattern. If you are adding another typedef for your interface, please,
-+ * place it with other typedefs and function prototypes.
-+ *
-+ * 3. Please, DO NOT add any macros or types that are local to a subsystem to avoid
-+ * cluttering. Include such items directly into the module's .c file or have a
-+ * local .h file to pass data between smaller modules. This file defines only
-+ * shared items.
++/* prototype for interrupt handler definition */
++typedef void (*VLYNQ_INTR_CNTRL_ISR)(void *arg1,void *arg2,void *arg3);
++
++typedef void
++(*VLYNQ_RESET_REMOTE)(struct VLYNQ_DEV_t *pDev, VLYNQ_RESET_MODE mode);
++
++typedef void
++(*VLYNQ_REPORT_CB)( struct VLYNQ_DEV_t *pDev, /* This VLYNQ */
++ VLYNQ_DEV_TYPE aSrcDvc, /* Event Cause -local/remote? */
++ unsigned int dwStatRegVal); /* Value of the relevant status register */
++
++
++/*-------Structure Definitions------------*/
++
++typedef struct VLYNQ_MEMORY_MAP_t
++{
++ unsigned int Txmap;
++ unsigned int RxOffset[VLYNQ_MAX_MEMORY_REGIONS];
++ unsigned int RxSize[VLYNQ_MAX_MEMORY_REGIONS];
++}VLYNQ_MEMORY_MAP;
++
++
++/**VLYNQ_INTERRUPT_CNTRL - defines the vlynq module interrupt
++ * settings in vlynq Control register */
++typedef struct VLYNQ_INTERRUPT_CNTRL_t
++{
++ /* vlynq interrupts handled by host or remote - maps to
++ * intLocal bit in vlynq control register */
++ VLYNQ_LOCAL_INT_CONFIG intLocal;
++
++ /* remote interrupts handled by vlynq isr or host system
++ * interrupt controller - maps to the int2Cfg in vlynq
++ * control register */
++ VLYNQ_REMOTE_INT_CONFIG intRemote;
++
++ /* bit in pending/set register used for module interrupts*/
++ unsigned int map_vector;
++
++ /* used only if remote interrupts are to be handled by system ISR*/
++ unsigned int intr_ptr;
++
++}VLYNQ_INTERRUPT_CNTRL;
++
++
++/* VLYNQ_INTR_CNTRL_ICB - defines the Interrupt control block which hold
++ * the interrupt dispatch table. The vlynq_root_isr() indexes into this
++ * table to identify the ISR to be invoked
+ */
++typedef struct VLYNQ_INTR_CNTRL_ICB_t
++{
++ VLYNQ_INTR_CNTRL_ISR isr; /* Clear errors during initialization */
++ void *arg1 ; /* Arg 1 for the ISR */
++ void *arg2 ; /* Arg 2 for the ISR */
++ void *arg3 ; /* Arg 3 for the ISR */
++ unsigned int isrCount; /* number of ISR invocations so far */
++ struct VLYNQ_INTR_CNTRL_ICB_t *next;
++}VLYNQ_INTR_CNTRL_ICB;
++
++/* overlay of vlynq register set */
++typedef struct VLYNQ_REG_SET_t
++{
++ unsigned int revision; /*offset : 0x00 */
++ unsigned int control; /* 0x04*/
++ unsigned int status; /* 0x08*/
++ unsigned int pad1; /* 0x0c*/
++ unsigned int intStatus; /*0x10*/
++ unsigned int intPending; /*0x14*/
++ unsigned int intPtr; /*0x18*/
++ unsigned int txMap; /*0x1C*/
++ unsigned int rxSize1; /*0x20*/
++ unsigned int rxOffset1; /*0x24*/
++ unsigned int rxSize2; /*0x28*/
++ unsigned int rxOffset2; /*0x2C*/
++ unsigned int rxSize3; /*0x30*/
++ unsigned int rxOffset3; /*0x34*/
++ unsigned int rxSize4; /*0x38*/
++ unsigned int rxOffset4; /*0x3C*/
++ unsigned int chipVersion; /*0x40*/
++ unsigned int pad2[8];
++ unsigned int ivr30; /*0x60*/
++ unsigned int ivr74; /*0x64*/
++ unsigned int pad3[7];
++}VLYNQ_REG_SET;
++
+
-+#ifndef __TNETD73XX_H__
-+#define __TNETD73XX_H__
++typedef struct VLYNQ_DEV_t
++{
++ /** module index:1,2,3... used for debugging purposes */
++ unsigned int dev_idx;
++
++ /*VLYNQ module base address */
++ unsigned int module_base;
++
++ /* clock source selection */
++ VLYNQ_CLK_SOURCE clk_source;
++
++ /* Clock Divider.Val=1 to 8. VLYNQ_clk = VBUSCLK/clk_div */
++ unsigned int clk_div;
++
++ /* State of the VLYNQ driver, set to VLYNQ_DRV_STATE_UNINIT, when initializing */
++ VLYNQ_DRV_STATE state;
++
++ /* Valid VLYNQ bus width, filled by driver */
++ VLYNQ_BUS_WIDTH width;
++
++ /* local memory mapping */
++ VLYNQ_MEMORY_MAP local_mem;
++
++ /* remote memory mapping */
++ VLYNQ_MEMORY_MAP remote_mem;
++
++ /* Local module interrupt params */
++ VLYNQ_INTERRUPT_CNTRL local_irq;
++
++ /* remote module interrupt params */
++ VLYNQ_INTERRUPT_CNTRL remote_irq;
+
-+#ifndef _ASMLANGUAGE /* This part not for assembly language */
++ /*** ICB related fields **/
++
++ /* Sizeof of ICB = VLYNQ_NUM_INT_BITS(for 32 bits in IntPending) +
++ * expansion slots for shared interrupts*/
++ VLYNQ_INTR_CNTRL_ICB pIntrCB[VLYNQ_NUM_INT_BITS + VLYNQ_IVR_CHAIN_SLOTS];
++ VLYNQ_INTR_CNTRL_ICB *freelist;
++
++ /* table holding mapping between intVector and the bit position the interrupt
++ * is mapped to(mapVector)*/
++ char vector_map[32];
++
++ /* user callback for vlynq events, NULL if unused */
++ VLYNQ_REPORT_CB report_cb;
++
++ /* user callback for resetting/realeasing remote device */
++ VLYNQ_RESET_REMOTE reset_cb;
+
-+extern unsigned int tnetd73xx_mips_freq;
-+extern unsigned int tnetd73xx_vbus_freq;
++ /*** Handles provided for direct access to register set if need be
++ * Must be intialized to point to appropriate address during
++ * vlynq_init */
++ volatile VLYNQ_REG_SET * local;
++ volatile VLYNQ_REG_SET * remote;
+
-+#include "tnetd73xx_err.h"
++ unsigned int intCount; /* number of interrupts generated so far */
++ unsigned int isrCount; /* number of ISR invocations so far */
++}VLYNQ_DEV;
+
-+#endif /* _ASMLANGUAGE */
+
++typedef struct VLYNQ_ISR_ARGS_t
++{
++ int irq;
++ void * arg;
++ void * regset;
++}VLYNQ_ISR_ARGS;
+
-+/*******************************************************************************************
-+* Emerald core specific
-+******************************************************************************************** */
+
-+#ifdef BIG_ENDIAN
-+#elif defined(LITTLE_ENDIAN)
-+#else
-+#error Need to define endianism
-+#endif
++/****************************************
++ * Function Prototypes *
++ * API exported by generic vlynq driver *
++ ****************************************/
++/* Initialization function */
++int vlynq_init( VLYNQ_DEV *pdev, VLYNQ_INIT_OPTIONS options);
+
-+#ifndef KSEG_MSK
-+#define KSEG_MSK 0xE0000000 /* Most significant 3 bits denote kseg choice */
-+#endif
++/* Check vlynq link */
++unsigned int vlynq_link_check( VLYNQ_DEV * pdev);
+
-+#ifndef KSEG_INV_MASK
-+#define KSEG_INV_MASK 0x1FFFFFFF /* Inverted mask for kseg address */
-+#endif
++/* Set interrupt vector in local or remote device */
++int vlynq_interrupt_vector_set( VLYNQ_DEV *pdev,
++ unsigned int int_vector,
++ unsigned int map_vector,
++ VLYNQ_DEV_TYPE dev,
++ VLYNQ_INTR_POLARITY pol,
++ VLYNQ_INTR_TYPE type);
+
-+#ifndef KSEG0_BASE
-+#define KSEG0_BASE 0x80000000
-+#endif
+
-+#ifndef KSEG1_BASE
-+#define KSEG1_BASE 0xA0000000
-+#endif
++int vlynq_interrupt_vector_cntl( VLYNQ_DEV *pdev,
++ unsigned int int_vector,
++ VLYNQ_DEV_TYPE dev,
++ unsigned int enable);
+
-+#ifndef KSEG0
-+#define KSEG0(addr) (((__u32)(addr) & ~KSEG_MSK) | KSEG0_BASE)
-+#endif
++unsigned int vlynq_interrupt_get_count( VLYNQ_DEV *pdev,
++ unsigned int map_vector);
+
-+#ifndef KSEG1
-+#define KSEG1(addr) (((__u32)(addr) & ~KSEG_MSK) | KSEG1_BASE)
-+#endif
++int vlynq_install_isr( VLYNQ_DEV *pdev,
++ unsigned int map_vector,
++ VLYNQ_INTR_CNTRL_ISR isr,
++ void *arg1, void *arg2, void *arg3);
+
-+#ifndef KUSEG
-+#define KUSEG(addr) ((__u32)(addr) & ~KSEG_MSK)
-+#endif
++int vlynq_uninstall_isr( VLYNQ_DEV *pdev,
++ unsigned int map_vector,
++ void *arg1, void *arg2, void *arg3);
+
-+#ifndef PHYS_ADDR
-+#define PHYS_ADDR(addr) ((addr) & KSEG_INV_MASK)
-+#endif
+
-+#ifndef PHYS_TO_K0
-+#define PHYS_TO_K0(addr) (PHYS_ADDR(addr)|KSEG0_BASE)
-+#endif
++void vlynq_root_isr(void *arg);
+
-+#ifndef PHYS_TO_K1
-+#define PHYS_TO_K1(addr) (PHYS_ADDR(addr)|KSEG1_BASE)
-+#endif
++void vlynq_delay(unsigned int clktime);
+
-+#ifndef REG8_ADDR
-+#define REG8_ADDR(addr) (volatile __u8 *)(PHYS_TO_K1(addr))
-+#define REG8_DATA(addr) (*(volatile __u8 *)(PHYS_TO_K1(addr)))
-+#define REG8_WRITE(addr, data) REG8_DATA(addr) = data;
-+#define REG8_READ(addr, data) data = (__u8) REG8_DATA(addr);
-+#endif
++/* The following functions, provide better granularity in setting
++ * interrupt parameters. (for better support of linux INT Controller)
++ * Note: The interrupt source is identified by "map_vector"- the bit
++ * position in interrupt status register*/
++
++int vlynq_interrupt_vector_map(VLYNQ_DEV * pdev,
++ VLYNQ_DEV_TYPE dev,
++ unsigned int int_vector,
++ unsigned int map_vector);
++
++int vlynq_interrupt_set_polarity(VLYNQ_DEV * pdev,
++ VLYNQ_DEV_TYPE dev,
++ unsigned int map_vector,
++ VLYNQ_INTR_POLARITY pol);
++
++int vlynq_interrupt_get_polarity( VLYNQ_DEV *pdev ,
++ VLYNQ_DEV_TYPE dev_type,
++ unsigned int map_vector);
+
-+#ifndef REG16_ADDR
-+#define REG16_ADDR(addr) (volatile __u16 *)(PHYS_TO_K1(addr))
-+#define REG16_DATA(addr) (*(volatile __u16 *)(PHYS_TO_K1(addr)))
-+#define REG16_WRITE(addr, data) REG16_DATA(addr) = data;
-+#define REG16_READ(addr, data) data = (__u16) REG16_DATA(addr);
-+#endif
++int vlynq_interrupt_set_type(VLYNQ_DEV * pdev,
++ VLYNQ_DEV_TYPE dev,
++ unsigned int map_vector,
++ VLYNQ_INTR_TYPE type);
+
-+#ifndef REG32_ADDR
-+#define REG32_ADDR(addr) (volatile __u32 *)(PHYS_TO_K1(addr))
-+#define REG32_DATA(addr) (*(volatile __u32 *)(PHYS_TO_K1(addr)))
-+#define REG32_WRITE(addr, data) REG32_DATA(addr) = data;
-+#define REG32_READ(addr, data) data = (__u32) REG32_DATA(addr);
-+#endif
++int vlynq_interrupt_get_type( VLYNQ_DEV *pdev,
++ VLYNQ_DEV_TYPE dev_type,
++ unsigned int map_vector);
+
-+#ifdef _LINK_KSEG0_ /* Application is linked into KSEG0 space */
-+#define VIRT_ADDR(addr) PHYS_TO_K0(PHYS_ADDR(addr))
-+#endif
++int vlynq_interrupt_enable(VLYNQ_DEV* pdev,
++ VLYNQ_DEV_TYPE dev,
++ unsigned int map_vector);
+
-+#ifdef _LINK_KSEG1_ /* Application is linked into KSEG1 space */
-+#define VIRT_ADDR(addr) PHYS_TO_K1(PHYS_ADDR(addr))
-+#endif
++int vlynq_interrupt_disable(VLYNQ_DEV * pdev,
++ VLYNQ_DEV_TYPE dev,
++ unsigned int map_vector);
++
+
-+#if !defined(_LINK_KSEG0_) && !defined(_LINK_KSEG1_)
-+#error You must define _LINK_KSEG0_ or _LINK_KSEG1_ to compile the code.
++
++
++
++#endif /* _VLYNQ_HAL_H_ */
+diff -urN linux.old/include/asm-mips/ar7/vlynq_hal.h linux.dev/include/asm-mips/ar7/vlynq_hal.h
+--- linux.old/include/asm-mips/ar7/vlynq_hal.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/include/asm-mips/ar7/vlynq_hal.h 2005-11-10 01:10:46.095590250 +0100
+@@ -0,0 +1,606 @@
++/***************************************************************************
++**+----------------------------------------------------------------------+**
++**| **** |**
++**| **** |**
++**| ******o*** |**
++**| ********_///_**** |**
++**| ***** /_//_/ **** |**
++**| ** ** (__/ **** |**
++**| ********* |**
++**| **** |**
++**| *** |**
++**| |**
++**| Copyright (c) 2003 Texas Instruments Incorporated |**
++**| ALL RIGHTS RESERVED |**
++**| |**
++**| Permission is hereby granted to licensees of Texas Instruments |**
++**| Incorporated (TI) products to use this computer program for the sole |**
++**| purpose of implementing a licensee product based on TI products. |**
++**| No other rights to reproduce, use, or disseminate this computer |**
++**| program, whether in part or in whole, are granted. |**
++**| |**
++**| TI makes no representation or warranties with respect to the |**
++**| performance of this computer program, and specifically disclaims |**
++**| any responsibility for any damages, special or consequential, |**
++**| connected with the use of this program. |**
++**| |**
++**+----------------------------------------------------------------------+**
++***************************************************************************/
++
++/*********************************************************************************
++ * ------------------------------------------------------------------------------
++ * Module : vlynq_hal.h
++ * Description :
++ * This header file provides the set of functions exported by the
++ * VLYNQ HAL. This file is included from the SOC specific VLYNQ driver wrapper.
++ * ------------------------------------------------------------------------------
++ *********************************************************************************/
++
++#ifndef _VLYNQ_HAL_H_
++#define _VLYNQ_HAL_H_
++
++#include <asm/ar7/avalanche_types.h>
++#include <asm/ar7/vlynq_hal_params.h>
++
++#ifndef PRIVATE
++#define PRIVATE static
+#endif
+
-+/* TNETD73XX chip definations */
++#ifndef GLOBAL
++#define GLOBAL
++#endif
+
-+#define FREQ_1MHZ 1000000
-+#define TNETD73XX_MIPS_FREQ tnetd73xx_mips_freq /* CPU clock frequency */
-+#define TNETD73XX_VBUS_FREQ tnetd73xx_vbus_freq /* originally (TNETD73XX_MIPS_FREQ/2) */
++/* Enable/Disable debug feature */
++#undef VLYNQ_DEBUG
+
-+#ifdef AR7SEAD2
-+#define TNETD73XX_MIPS_FREQ_DEFAULT 25000000 /* 25 Mhz for sead2 board crystal */
-+#else
-+#define TNETD73XX_MIPS_FREQ_DEFAULT 125000000 /* 125 Mhz */
++#ifdef VLYNQ_DEBUG /* This needs to be OS abstracted - for testing use vxworks/linux calls */
++#define debugPrint(format,args...)
++#else
++#define debugPrint(format,args...)
+#endif
-+#define TNETD73XX_VBUS_FREQ_DEFAULT (TNETD73XX_MIPS_FREQ_DEFAULT / 2) /* Sync mode */
+
++/* Error defines */
++#define VLYNQ_SUCCESS 0
+
++#define VLYNQ_ERRCODE_BASE 0 /* Chosen by system */
++#define VLYNQ_INVALID_ARG -(VLYNQ_ERRCODE_BASE+1)
++#define VLYNQ_INVALID_DRV_STATE -(VLYNQ_ERRCODE_BASE+2)
++#define VLYNQ_INT_CONFIG_ERR -(VLYNQ_ERRCODE_BASE+3)
++#define VLYNQ_LINK_DOWN -(VLYNQ_ERRCODE_BASE+4)
++#define VLYNQ_MEMALLOC_FAIL -(VLYNQ_ERRCODE_BASE+5)
++#define VLYNQ_ISR_NON_EXISTENT -(VLYNQ_ERRCODE_BASE+6)
++#define VLYNQ_INTVEC_MAP_NOT_FOUND -(VLYNQ_ERRCODE_BASE+7)
+
-+/* Module base addresses */
-+#define TNETD73XX_ADSLSS_BASE PHYS_TO_K1(0x01000000) /* ADSLSS Module */
-+#define TNETD73XX_BBIF_CTRL_BASE PHYS_TO_K1(0x02000000) /* BBIF Control */
-+#define TNETD73XX_ATMSAR_BASE PHYS_TO_K1(0x03000000) /* ATM SAR */
-+#define TNETD73XX_USB_BASE PHYS_TO_K1(0x03400000) /* USB Module */
-+#define TNETD73XX_VLYNQ0_BASE PHYS_TO_K1(0x04000000) /* VLYNQ0 Module */
-+#define TNETD73xx_EMAC0_BASE PHYS_TO_K1(0x08610000) /* EMAC0 Module*/
-+#define TNETD73XX_EMIF_BASE PHYS_TO_K1(0x08610800) /* EMIF Module */
-+#define TNETD73XX_GPIO_BASE PHYS_TO_K1(0x08610900) /* GPIO control */
-+#define TNETD73XX_CLOCK_CTRL_BASE PHYS_TO_K1(0x08610A00) /* Clock Control */
-+#define TNETD73XX_WDTIMER_BASE PHYS_TO_K1(0x08610B00) /* WDTIMER Module */
-+#define TNETD73XX_TIMER0_BASE PHYS_TO_K1(0x08610C00) /* TIMER0 Module */
-+#define TNETD73XX_TIMER1_BASE PHYS_TO_K1(0x08610D00) /* TIMER1 Module */
-+#define TNETD73XX_UARTA_BASE PHYS_TO_K1(0x08610E00) /* UART A */
-+#define TNETD73XX_UARTB_BASE PHYS_TO_K1(0x08610F00) /* UART B */
-+#define TNETD73XX_I2C_BASE PHYS_TO_K1(0x08611000) /* I2C Module */
-+#define TNETD73XX_USB_DMA_BASE PHYS_TO_K1(0x08611200) /* USB Module */
-+#define TNETD73XX_MCDMA_BASE PHYS_TO_K1(0x08611400) /* MC-DMA */
-+#define TNETD73xx_VDMAVT_BASE PHYS_TO_K1(0x08611500) /* VDMAVT Control */
-+#define TNETD73XX_RST_CTRL_BASE PHYS_TO_K1(0x08611600) /* Reset Control */
-+#define TNETD73xx_BIST_CTRL_BASE PHYS_TO_K1(0x08611700) /* BIST Control */
-+#define TNETD73xx_VLYNQ0_CTRL_BASE PHYS_TO_K1(0x08611800) /* VLYNQ0 Control */
-+#define TNETD73XX_DCL_BASE PHYS_TO_K1(0x08611A00) /* Device Configuration Latch */
-+#define TNETD73xx_VLYNQ1_CTRL_BASE PHYS_TO_K1(0x08611C00) /* VLYNQ1 Control */
-+#define TNETD73xx_MDIO_BASE PHYS_TO_K1(0x08611E00) /* MDIO Control */
-+#define TNETD73XX_FSER_BASE PHYS_TO_K1(0x08612000) /* FSER Control */
-+#define TNETD73XX_INTC_BASE PHYS_TO_K1(0x08612400) /* Interrupt Controller */
-+#define TNETD73xx_EMAC1_BASE PHYS_TO_K1(0x08612800) /* EMAC1 Module*/
-+#define TNETD73XX_VLYNQ1_BASE PHYS_TO_K1(0x0C000000) /* VLYNQ1 Module */
++/* Vlynq Defines and Macros */
+
-+/* BBIF Registers */
-+#define TNETD73XX_BBIF_ADSLADR (TNETD73XX_BBIF_CTRL_BASE + 0x0)
++#define VLYNQ_NUM_INT_BITS 32 /* 32 bit interrupt staus register */
+
-+/* Device Configuration Latch Registers */
-+#define TNETD73XX_DCL_BOOTCR (TNETD73XX_DCL_BASE + 0x0)
-+#define TNETD73XX_DCL_DPLLSELR (TNETD73XX_DCL_BASE + 0x10)
-+#define TNETD73XX_DCL_SPEEDCTLR (TNETD73XX_DCL_BASE + 0x14)
-+#define TNETD73XX_DCL_SPEEDPWDR (TNETD73XX_DCL_BASE + 0x18)
-+#define TNETD73XX_DCL_SPEEDCAPR (TNETD73XX_DCL_BASE + 0x1C)
++/* Base address of module */
++#define VLYNQ_BASE (pdev->module_base)
+
-+/* GPIO Control */
-+#define TNETD73XX_GPIODINR (TNETD73XX_GPIO_BASE + 0x0)
-+#define TNETD73XX_GPIODOUTR (TNETD73XX_GPIO_BASE + 0x4)
-+#define TNETD73XX_GPIOPDIRR (TNETD73XX_GPIO_BASE + 0x8)
-+#define TNETD73XX_GPIOENR (TNETD73XX_GPIO_BASE + 0xC)
-+#define TNETD73XX_CVR (TNETD73XX_GPIO_BASE + 0x14)
-+#define TNETD73XX_DIDR1 (TNETD73XX_GPIO_BASE + 0x18)
-+#define TNETD73XX_DIDR2 (TNETD73XX_GPIO_BASE + 0x1C)
++#define VLYNQ_REMOTE_REGS_OFFSET 0x0080
+
-+/* Reset Control */
-+#define TNETD73XX_RST_CTRL_PRCR (TNETD73XX_RST_CTRL_BASE + 0x0)
-+#define TNETD73XX_RST_CTRL_SWRCR (TNETD73XX_RST_CTRL_BASE + 0x4)
-+#define TNETD73XX_RST_CTRL_RSR (TNETD73XX_RST_CTRL_BASE + 0x8)
++#define VLYNQ_REV_OFFSET 0x0000
++#define VLYNQ_CTRL_OFFSET 0x0004
++#define VLYNQ_STATUS_OFFSET 0x0008
++#define VLYNQ_INT_STAT_OFFSET 0x0010
++#define VLYNQ_INT_PEND_OFFSET 0x0014
++#define VLYNQ_INT_PTR_OFFSET 0x0018
++#define VLYNQ_TXMAP_OFFSET 0x001c
+
-+/* Power Control */
-+#define TNETD73XX_POWER_CTRL_PDCR (TNETD73XX_CLOCK_CTRL_BASE + 0x0)
-+#define TNETD73XX_POWER_CTRL_PCLKCR (TNETD73XX_CLOCK_CTRL_BASE + 0x4)
-+#define TNETD73XX_POWER_CTRL_PDUCR (TNETD73XX_CLOCK_CTRL_BASE + 0x8)
-+#define TNETD73XX_POWER_CTRL_WKCR (TNETD73XX_CLOCK_CTRL_BASE + 0xC)
++#define VLYNQ_RX0MAP_SIZE_REG_OFFSET 0x0020
++#define VLYNQ_RX0MAP_OFFSET_REG_OFFSET 0x0024
+
-+/* Clock Control */
-+#define TNETD73XX_CLK_CTRL_SCLKCR (TNETD73XX_CLOCK_CTRL_BASE + 0x20)
-+#define TNETD73XX_CLK_CTRL_SCLKPLLCR (TNETD73XX_CLOCK_CTRL_BASE + 0x30)
-+#define TNETD73XX_CLK_CTRL_MCLKCR (TNETD73XX_CLOCK_CTRL_BASE + 0x40)
-+#define TNETD73XX_CLK_CTRL_MCLKPLLCR (TNETD73XX_CLOCK_CTRL_BASE + 0x50)
-+#define TNETD73XX_CLK_CTRL_UCLKCR (TNETD73XX_CLOCK_CTRL_BASE + 0x60)
-+#define TNETD73XX_CLK_CTRL_UCLKPLLCR (TNETD73XX_CLOCK_CTRL_BASE + 0x70)
-+#define TNETD73XX_CLK_CTRL_ACLKCR0 (TNETD73XX_CLOCK_CTRL_BASE + 0x80)
-+#define TNETD73XX_CLK_CTRL_ACLKPLLCR0 (TNETD73XX_CLOCK_CTRL_BASE + 0x90)
-+#define TNETD73XX_CLK_CTRL_ACLKCR1 (TNETD73XX_CLOCK_CTRL_BASE + 0xA0)
-+#define TNETD73XX_CLK_CTRL_ACLKPLLCR1 (TNETD73XX_CLOCK_CTRL_BASE + 0xB0)
++#define VLYNQ_CHIP_VER_OFFSET 0x0040
++#define VLYNQ_IVR_REGS_OFFSET 0x0060
+
-+/* EMIF control */
-+#define TNETD73XX_EMIF_SDRAM_CFG ( TNETD73XX_EMIF_BASE + 0x08 )
++#define VLYNQ_INT_PENDING_REG_PTR 0x14
++#define VLYNQ_R_INT_PENDING_REG_PTR VLYNQ_REMOTE_REGS_OFFSET + 0x14
+
-+/* UART */
-+#ifdef AR7SEAD2
-+#define TNETD73XX_UART_FREQ 3686400
-+#else
-+#define TNETD73XX_UART_FREQ TNETD73XX_VBUS_FREQ
-+#endif
++#define VLYNQ_REV_REG *((volatile UINT32 *)(VLYNQ_BASE+VLYNQ_REV_OFFSET))
++#define VLYNQ_CTRL_REG *((volatile UINT32 *)(VLYNQ_BASE+VLYNQ_CTRL_OFFSET))
++#define VLYNQ_STATUS_REG *((volatile UINT32 *)(VLYNQ_BASE+VLYNQ_STATUS_OFFSET))
++#define VLYNQ_INT_STAT_REG *((volatile UINT32 *)(VLYNQ_BASE+VLYNQ_INT_STAT_OFFSET))
++#define VLYNQ_INT_PEND_REG *((volatile UINT32 *)(VLYNQ_BASE+VLYNQ_INT_PEND_OFFSET))
++#define VLYNQ_INT_PTR_REG *((volatile UINT32 *)(VLYNQ_BASE+VLYNQ_INT_PTR_OFFSET))
++#define VLYNQ_TXMAP_REG *((volatile UINT32 *)(VLYNQ_BASE+VLYNQ_TXMAP_OFFSET))
+
-+/* Interrupt Controller */
++/** map takes on values between 1 to VLYNQ_MAX_MEMORY_REGIONS **/
++#define VLYNQ_RXMAP_SIZE_REG(map) \
++ *((volatile UINT32 *)(VLYNQ_BASE+VLYNQ_RX0MAP_SIZE_REG_OFFSET+( (map-1)<<3)))
++
++/** map takes on values between 1 to VLYNQ_MAX_MEMORY_REGIONS **/
++#define VLYNQ_RXMAP_OFFSET_REG(map) \
++ *((volatile UINT32 *)(VLYNQ_BASE+VLYNQ_RX0MAP_OFFSET_REG_OFFSET+( (map-1)<<3)))
+
-+/* Primary interrupts */
-+#define TNETD73XX_INTC_UNIFIED_SECONDARY 0 /* Unified secondary interrupt */
-+#define TNETD73XX_INTC_EXTERNAL0 1 /* External Interrupt Line 0 */
-+#define TNETD73XX_INTC_EXTERNAL1 2 /* External Interrupt Line 1 */
-+#define TNETD73XX_INTC_RESERVED3 3 /* Reserved */
-+#define TNETD73XX_INTC_RESERVED4 4 /* Reserved */
-+#define TNETD73XX_INTC_TIMER0 5 /* TIMER 0 int */
-+#define TNETD73XX_INTC_TIMER1 6 /* TIMER 1 int */
-+#define TNETD73XX_INTC_UART0 7 /* UART 0 int */
-+#define TNETD73XX_INTC_UART1 8 /* UART 1 int */
-+#define TNETD73XX_INTC_MCDMA0 9 /* MCDMA 0 int */
-+#define TNETD73XX_INTC_MCDMA1 10 /* MCDMA 1 int */
-+#define TNETD73XX_INTC_RESERVED11 11 /* Reserved */
-+#define TNETD73XX_INTC_RESERVED12 12 /* Reserved */
-+#define TNETD73XX_INTC_RESERVED13 13 /* Reserved */
-+#define TNETD73XX_INTC_RESERVED14 14 /* Reserved */
-+#define TNETD73XX_INTC_ATMSAR 15 /* ATM SAR int */
-+#define TNETD73XX_INTC_RESERVED16 16 /* Reserved */
-+#define TNETD73XX_INTC_RESERVED17 17 /* Reserved */
-+#define TNETD73XX_INTC_RESERVED18 18 /* Reserved */
-+#define TNETD73XX_INTC_EMAC0 19 /* EMAC 0 int */
-+#define TNETD73XX_INTC_RESERVED20 20 /* Reserved */
-+#define TNETD73XX_INTC_VLYNQ0 21 /* VLYNQ 0 int */
-+#define TNETD73XX_INTC_CODEC 22 /* CODEC int */
-+#define TNETD73XX_INTC_RESERVED23 23 /* Reserved */
-+#define TNETD73XX_INTC_USBSLAVE 24 /* USB Slave int */
-+#define TNETD73XX_INTC_VLYNQ1 25 /* VLYNQ 1 int */
-+#define TNETD73XX_INTC_RESERVED26 26 /* Reserved */
-+#define TNETD73XX_INTC_RESERVED27 27 /* Reserved */
-+#define TNETD73XX_INTC_ETH_PHY 28 /* Ethernet PHY */
-+#define TNETD73XX_INTC_I2C 29 /* I2C int */
-+#define TNETD73XX_INTC_MCDMA2 30 /* MCDMA 2 int */
-+#define TNETD73XX_INTC_MCDMA3 31 /* MCDMA 3 int */
-+#define TNETD73XX_INTC_RESERVED32 32 /* Reserved */
-+#define TNETD73XX_INTC_EMAC1 33 /* EMAC 1 int */
-+#define TNETD73XX_INTC_RESERVED34 34 /* Reserved */
-+#define TNETD73XX_INTC_RESERVED35 35 /* Reserved */
-+#define TNETD73XX_INTC_RESERVED36 36 /* Reserved */
-+#define TNETD73XX_INTC_VDMAVTRX 37 /* VDMAVTRX */
-+#define TNETD73XX_INTC_VDMAVTTX 38 /* VDMAVTTX */
-+#define TNETD73XX_INTC_ADSLSS 39 /* ADSLSS */
++#define VLYNQ_CHIP_VER_REG *((volatile UINT32 *)(VLYNQ_BASE+VLYNQ_CHIP_VER_OFFSET))
+
-+/* Secondary interrupts */
-+#define TNETD73XX_INTC_SEC0 40 /* Secondary */
-+#define TNETD73XX_INTC_SEC1 41 /* Secondary */
-+#define TNETD73XX_INTC_SEC2 42 /* Secondary */
-+#define TNETD73XX_INTC_SEC3 43 /* Secondary */
-+#define TNETD73XX_INTC_SEC4 44 /* Secondary */
-+#define TNETD73XX_INTC_SEC5 45 /* Secondary */
-+#define TNETD73XX_INTC_SEC6 46 /* Secondary */
-+#define TNETD73XX_INTC_EMIF 47 /* EMIF */
-+#define TNETD73XX_INTC_SEC8 48 /* Secondary */
-+#define TNETD73XX_INTC_SEC9 49 /* Secondary */
-+#define TNETD73XX_INTC_SEC10 50 /* Secondary */
-+#define TNETD73XX_INTC_SEC11 51 /* Secondary */
-+#define TNETD73XX_INTC_SEC12 52 /* Secondary */
-+#define TNETD73XX_INTC_SEC13 53 /* Secondary */
-+#define TNETD73XX_INTC_SEC14 54 /* Secondary */
-+#define TNETD73XX_INTC_SEC15 55 /* Secondary */
-+#define TNETD73XX_INTC_SEC16 56 /* Secondary */
-+#define TNETD73XX_INTC_SEC17 57 /* Secondary */
-+#define TNETD73XX_INTC_SEC18 58 /* Secondary */
-+#define TNETD73XX_INTC_SEC19 59 /* Secondary */
-+#define TNETD73XX_INTC_SEC20 60 /* Secondary */
-+#define TNETD73XX_INTC_SEC21 61 /* Secondary */
-+#define TNETD73XX_INTC_SEC22 62 /* Secondary */
-+#define TNETD73XX_INTC_SEC23 63 /* Secondary */
-+#define TNETD73XX_INTC_SEC24 64 /* Secondary */
-+#define TNETD73XX_INTC_SEC25 65 /* Secondary */
-+#define TNETD73XX_INTC_SEC26 66 /* Secondary */
-+#define TNETD73XX_INTC_SEC27 67 /* Secondary */
-+#define TNETD73XX_INTC_SEC28 68 /* Secondary */
-+#define TNETD73XX_INTC_SEC29 69 /* Secondary */
-+#define TNETD73XX_INTC_SEC30 70 /* Secondary */
-+#define TNETD73XX_INTC_SEC31 71 /* Secondary */
++/* 0 =< ivr <= 31; currently ivr < VLYNQ_IVR_MAXIVR=8) */
++#define VLYNQ_IVR_OFFSET(ivr) \
++ (VLYNQ_BASE + VLYNQ_IVR_REGS_OFFSET +((((unsigned)(ivr)) & 31) & ~3) )
+
-+/* These ugly macros are to access the -1 registers, like config1 */
-+#define MFC0_SEL1_OPCODE(dst, src)\
-+ .word (0x40000000 | ((dst)<<16) | ((src)<<11) | 1);\
-+ nop; \
-+ nop; \
-+ nop
++#define VLYNQ_IVR_03TO00_REG *((volatile UINT32*) (VLYNQ_IVR_OFFSET(0)) )
++#define VLYNQ_IVR_07TO04_REG *((volatile UINT32*) (VLYNQ_IVR_OFFSET(4)) )
++/*** Can be extended for 11TO08...31TO28 when all 31 are supported**/
+
-+#define MTC0_SEL1_OPCODE(dst, src)\
-+ .word (0x40800000 | ((dst)<<16) | ((src)<<11) | 1);\
-+ nop; \
-+ nop; \
-+ nop
++#define VLYNQ_IVR_INTEN(ivr) (((UINT32)(0x80)) << ((((unsigned)(ivr)) % 4) * 8))
++#define VLYNQ_IVR_INTTYPE(ivr) (((UINT32)(0x40)) << ((((unsigned)(ivr)) % 4) * 8))
++#define VLYNQ_IVR_INTPOL(ivr) (((UINT32)(0x20)) << ((((unsigned)(ivr)) % 4) * 8))
++#define VLYNQ_IVR_INTVEC(ivr) (((UINT32)(0x1F)) << ((((unsigned)(ivr)) % 4) * 8))
++#define VLYNQ_IVR_INTALL(ivr) (((UINT32)(0xFF)) << ((((unsigned)(ivr)) % 4) * 8))
+
+
-+/* Below are Jade core specific */
-+#define CFG0_4K_IL_MASK 0x00380000
-+#define CFG0_4K_IL_SHIFT 19
-+#define CFG0_4K_IA_MASK 0x00070000
-+#define CFG0_4K_IA_SHIFT 16
-+#define CFG0_4K_IS_MASK 0x01c00000
-+#define CFG0_4K_IS_SHIFT 22
+
-+#define CFG0_4K_DL_MASK 0x00001c00
-+#define CFG0_4K_DL_SHIFT 10
-+#define CFG0_4K_DA_MASK 0x00000380
-+#define CFG0_4K_DA_SHIFT 7
-+#define CFG0_4K_DS_MASK 0x0000E000
-+#define CFG0_4K_DS_SHIFT 13
++/*********************************
++ * Remote VLYNQ register set *
++ *********************************/
+
++#define VLYNQ_R_REV_OFFSET 0x0080
++#define VLYNQ_R_CTRL_OFFSET 0x0084
++#define VLYNQ_R_STATUS_OFFSET 0x0088
++#define VLYNQ_R_INT_STAT_OFFSET 0x0090
++#define VLYNQ_R_INT_PEND_OFFSET 0x0094
++#define VLYNQ_R_INT_PTR_OFFSET 0x0098
++#define VLYNQ_R_TXMAP_OFFSET 0x009c
+
++#define VLYNQ_R_RX0MAP_SIZE_REG_OFFSET 0x00A0
++#define VLYNQ_R_RX0MAP_OFFSET_REG_OFFSET 0x00A4
+
-+#endif /* __TNETD73XX_H_ */
-diff -urN linux.old/include/asm-mips/ar7/tnetd73xx_misc.h linux.dev/include/asm-mips/ar7/tnetd73xx_misc.h
---- linux.old/include/asm-mips/ar7/tnetd73xx_misc.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/include/asm-mips/ar7/tnetd73xx_misc.h 2005-07-12 03:01:26.110438256 +0200
-@@ -0,0 +1,239 @@
-+/******************************************************************************
-+ * FILE PURPOSE: TNETD73xx Misc modules API Header
-+ ******************************************************************************
-+ * FILE NAME: tnetd73xx_misc.h
-+ *
-+ * DESCRIPTION: Clock Control, Reset Control, Power Management, GPIO
-+ * FSER Modules API
-+ * As per TNETD73xx specifications
-+ *
-+ * REVISION HISTORY:
-+ * 27 Nov 02 - Sharath Kumar PSP TII
-+ * 14 Feb 03 - Anant Gole PSP TII
-+ *
-+ * (C) Copyright 2002, Texas Instruments, Inc
-+ *******************************************************************************/
++#define VLYNQ_R_CHIP_VER_OFFSET 0x00C0
++#define VLYNQ_R_IVR_REGS_OFFSET 0x00E0
+
-+#ifndef __TNETD73XX_MISC_H__
-+#define __TNETD73XX_MISC_H__
++#define VLYNQ_R_REV_REG *((volatile UINT32 *)(VLYNQ_BASE + VLYNQ_R_REV_OFFSET))
++#define VLYNQ_R_CTRL_REG *((volatile UINT32 *)(VLYNQ_BASE + VLYNQ_R_CTRL_OFFSET))
++#define VLYNQ_R_STATUS_REG *((volatile UINT32 *)(VLYNQ_BASE + VLYNQ_R_STATUS_OFFSET))
++#define VLYNQ_R_INT_STAT_REG *((volatile UINT32 *)(VLYNQ_BASE + VLYNQ_R_INT_STAT_OFFSET))
++#define VLYNQ_R_INT_PEND_REG *((volatile UINT32 *)(VLYNQ_BASE + VLYNQ_R_INT_PEND_OFFSET))
++#define VLYNQ_R_INT_PTR_REG *((volatile UINT32 *)(VLYNQ_BASE + VLYNQ_R_INT_PTR_OFFSET))
++#define VLYNQ_R_TXMAP_REG *((volatile UINT32 *)(VLYNQ_BASE + VLYNQ_R_TXMAP_OFFSET))
+
-+/*****************************************************************************
-+ * Reset Control Module
-+ *****************************************************************************/
++/** map takes on values between 1 to VLYNQ_MAX_MEMORY_REGIONS **/
++#define VLYNQ_R_RXMAP_SIZE_REG(map) \
++ *((volatile UINT32 *)(VLYNQ_BASE + VLYNQ_R_RX0MAP_SIZE_REG_OFFSET + ((map-1)<<3)))
++
++/** map takes on values between 1 to VLYNQ_MAX_MEMORY_REGIONS **/
++#define VLYNQ_R_RXMAP_OFFSET_REG(map) \
++ *((volatile UINT32 *)(VLYNQ_BASE + VLYNQ_R_RX0MAP_OFFSET_REG_OFFSET + ((map-1)<<3)))
++
++#define VLYNQ_R_CHIP_VER_REG *((volatile UINT32 *)(VLYNQ_BASE + VLYNQ_R_CHIP_VER_OFFSET)
++
++#define VLYNQ_R_IVR_OFFSET(ivr) \
++ (VLYNQ_BASE + VLYNQ_R_IVR_REGS_OFFSET +((((unsigned)(ivr)) & 31) & ~3))
+
-+typedef enum TNETD73XX_RESET_MODULE_tag
-+{
-+ RESET_MODULE_UART0 = 0,
-+ RESET_MODULE_UART1 = 1,
-+ RESET_MODULE_I2C = 2,
-+ RESET_MODULE_TIMER0 = 3,
-+ RESET_MODULE_TIMER1 = 4,
-+ RESET_MODULE_GPIO = 6,
-+ RESET_MODULE_ADSLSS = 7,
-+ RESET_MODULE_USBS = 8,
-+ RESET_MODULE_SAR = 9,
-+ RESET_MODULE_VDMA_VT = 11,
-+ RESET_MODULE_FSER = 12,
-+ RESET_MODULE_VLYNQ1 = 16,
-+ RESET_MODULE_EMAC0 = 17,
-+ RESET_MODULE_DMA = 18,
-+ RESET_MODULE_BIST = 19,
-+ RESET_MODULE_VLYNQ0 = 20,
-+ RESET_MODULE_EMAC1 = 21,
-+ RESET_MODULE_MDIO = 22,
-+ RESET_MODULE_ADSLSS_DSP = 23,
-+ RESET_MODULE_EPHY = 26
-+} TNETD73XX_RESET_MODULE_T;
+
-+typedef enum TNETD73XX_RESET_CTRL_tag
-+{
-+ IN_RESET = 0,
-+ OUT_OF_RESET
-+} TNETD73XX_RESET_CTRL_T;
++/*** Can be extended for 11TO08...31TO28 when all 31 are supported**/
++#define VLYNQ_R_IVR_03TO00_REG *((volatile UINT32*) (VLYNQ_R_IVR_OFFSET(0)) )
++#define VLYNQ_R_IVR_07TO04_REG *((volatile UINT32*) (VLYNQ_R_IVR_OFFSET(4)) )
+
-+typedef enum TNETD73XX_SYS_RST_MODE_tag
-+{
-+ RESET_SOC_WITH_MEMCTRL = 1, /* SW0 bit in SWRCR register */
-+ RESET_SOC_WITHOUT_MEMCTRL = 2 /* SW1 bit in SWRCR register */
-+} TNETD73XX_SYS_RST_MODE_T;
+
-+typedef enum TNETD73XX_SYS_RESET_STATUS_tag
++/****End of remote register set definition******/
++
++
++/*** Masks for individual register fields ***/
++
++#define VLYNQ_MODULE_ID_MASK 0xffff0000
++#define VLYNQ_MAJOR_REV_MASK 0x0000ff00
++#define VLYNQ_MINOR_REV_MASK 0x000000ff
++
++
++#define VLYNQ_CTL_ILOOP_MASK 0x00000002
++#define VLYNQ_CTL_INT2CFG_MASK 0x00000080
++#define VLYNQ_CTL_INTVEC_MASK 0x00001f00
++#define VLYNQ_CTL_INTEN_MASK 0x00002000
++#define VLYNQ_CTL_INTLOCAL_MASK 0x00004000
++#define VLYNQ_CTL_CLKDIR_MASK 0x00008000
++#define VLYNQ_CTL_CLKDIV_MASK 0x00070000
++#define VLYNQ_CTL_MODE_MASK 0x00e00000
++
++
++#define VLYNQ_STS_LINK_MASK 0x00000001 /* Link is active */
++#define VLYNQ_STS_MPEND_MASK 0x00000002 /* Pending master requests */
++#define VLYNQ_STS_SPEND_MASK 0x00000004 /* Pending slave requests */
++#define VLYNQ_STS_NFEMPTY0_MASK 0x00000008 /* Master data FIFO not empty */
++#define VLYNQ_STS_NFEMPTY1_MASK 0x00000010 /* Master command FIFO not empty */
++#define VLYNQ_STS_NFEMPTY2_MASK 0x00000020 /* Slave data FIFO not empty */
++#define VLYNQ_STS_NFEMPTY3_MASK 0x00000040 /* Slave command FIFO not empty */
++#define VLYNQ_STS_LERROR_MASK 0x00000080 /* Local error, w/c */
++#define VLYNQ_STS_RERROR_MASK 0x00000100 /* remote error w/c */
++#define VLYNQ_STS_OFLOW_MASK 0x00000200
++#define VLYNQ_STS_IFLOW_MASK 0x00000400
++#define VLYNQ_STS_MODESUP_MASK 0x00E00000 /* Highest mode supported */
++#define VLYNQ_STS_SWIDTH_MASK 0x07000000 /* Used for reading the width of VLYNQ bus */
++#define VLYNQ_STS_DEBUG_MASK 0xE0000000
++
++#define VLYNQ_CTL_INTVEC_SHIFT 0x08
++#define VLYNQ_CTL_INTEN_SHIFT 0x0D
++#define VLYNQ_CTL_INT2CFG_SHIFT 0x07
++#define VLYNQ_CTL_INTLOCAL_SHIFT 0x0E
++
++#define VLYNQ_CTL_INTFIELDS_CLEAR_MASK 0x7F80
++
++#define VLYNQ_CHIPVER_DEVREV_MASK 0xffff0000
++#define VLYNQ_CHIPVER_DEVID_MASK 0x0000ffff
++
++#define VLYNQ_IVR_INTEN_MASK 0x80
++#define VLYNQ_IVR_INTTYPE_MASK 0x40
++#define VLYNQ_IVR_INTPOL_MASK 0x20
++
++
++/**** Helper macros ****/
++
++#define VLYNQ_RESETCB(arg) \
++ if( pdev->reset_cb != NULL) \
++ { \
++ (pdev->reset_cb)(pdev, (arg)); \
++ }
++
++#define VLYNQ_STATUS_FLD_WIDTH(sts) (((sts) & VLYNQ_STS_SWIDTH_MASK) >> 24 )
++#define VLYNQ_CTL_INTVEC(x) (((x) & 31) << 8 )
++
++#define VLYNQ_INRANGE(x,hi,lo) (((x) <= (hi)) && ((x) >= (lo)))
++#define VLYNQ_OUTRANGE(x,hi,lo) (((x) > (hi)) || ((x) < (lo)))
++
++#define VLYNQ_ALIGN4(x) (x)=(x)&(~3)
++
++
++/*************************************
++ * Enums *
++ *************************************/
++
++/* Initialization options define what operations are
++ * undertaken during vlynq module initialization */
++typedef enum
+{
-+ HARDWARE_RESET = 0,
-+ SOFTWARE_RESET0, /* Caused by writing 1 to SW0 bit in SWRCR register */
-+ WATCHDOG_RESET,
-+ SOFTWARE_RESET1 /* Caused by writing 1 to SW1 bit in SWRCR register */
-+} TNETD73XX_SYS_RESET_STATUS_T;
++ /* Init host local memory regions.This allows
++ * local host access remote memory regions */
++ VLYNQ_INIT_LOCAL_MEM_REGIONS = 0x01,
++ /* Init host remote memory regions.This allows
++ * remote device access local memory regions */
++ VLYNQ_INIT_REMOTE_MEM_REGIONS =0x02,
++ /* Init local interrupt config*/
++ VLYNQ_INIT_LOCAL_INTERRUPTS =0x04,
++ /* Init remote interrupt config*/
++ VLYNQ_INIT_REMOTE_INTERRUPTS =0x08,
++ /* Check link during initialization*/
++ VLYNQ_INIT_CHECK_LINK =0x10,
++ /* configure clock during init */
++ VLYNQ_INIT_CONFIG_CLOCK =0x20,
++ /* Clear errors during init */
++ VLYNQ_INIT_CLEAR_ERRORS =0x40,
++ /* All options */
++ VLYNQ_INIT_PERFORM_ALL =0x7F
++}VLYNQ_INIT_OPTIONS;
++
++
++/* VLYNQ_DEV_TYPE identifies local or remote device */
++typedef enum
++{
++ VLYNQ_LOCAL_DVC = 0, /* vlynq local device (SOC's vlynq module) */
++ VLYNQ_REMOTE_DVC = 1 /* vlynq remote device (remote vlynq module) */
++}VLYNQ_DEV_TYPE;
+
-+void tnetd73xx_reset_ctrl(TNETD73XX_RESET_MODULE_T reset_module,
-+ TNETD73XX_RESET_CTRL_T reset_ctrl);
-+TNETD73XX_RESET_CTRL_T tnetd73xx_get_reset_status(TNETD73XX_RESET_MODULE_T reset_module);
-+void tnetd73xx_sys_reset(TNETD73XX_SYS_RST_MODE_T mode);
-+TNETD73XX_SYS_RESET_STATUS_T tnetd73xx_get_sys_last_reset_status(void);
-+
-+/*****************************************************************************
-+ * Power Control Module
-+ *****************************************************************************/
+
-+typedef enum TNETD73XX_POWER_MODULE_tag
++/* VLYNQ_CLK_SOURCE identifies the vlynq module clock source */
++typedef enum
+{
-+ POWER_MODULE_USBSP = 0,
-+ POWER_MODULE_WDTP = 1,
-+ POWER_MODULE_UT0P = 2,
-+ POWER_MODULE_UT1P = 3,
-+ POWER_MODULE_IICP = 4,
-+ POWER_MODULE_VDMAP = 5,
-+ POWER_MODULE_GPIOP = 6,
-+ POWER_MODULE_VLYNQ1P = 7,
-+ POWER_MODULE_SARP = 8,
-+ POWER_MODULE_ADSLP = 9,
-+ POWER_MODULE_EMIFP = 10,
-+ POWER_MODULE_ADSPP = 12,
-+ POWER_MODULE_RAMP = 13,
-+ POWER_MODULE_ROMP = 14,
-+ POWER_MODULE_DMAP = 15,
-+ POWER_MODULE_BISTP = 16,
-+ POWER_MODULE_TIMER0P = 18,
-+ POWER_MODULE_TIMER1P = 19,
-+ POWER_MODULE_EMAC0P = 20,
-+ POWER_MODULE_EMAC1P = 22,
-+ POWER_MODULE_EPHYP = 24,
-+ POWER_MODULE_VLYNQ0P = 27,
-+} TNETD73XX_POWER_MODULE_T;
++ VLYNQ_CLK_SOURCE_NONE = 0, /* do not initialize clock generator*/
++ VLYNQ_CLK_SOURCE_LOCAL = 1, /* clock is generated by local machine */
++ VLYNQ_CLK_SOURCE_REMOTE = 2 /* clock is generated by remote machine */
++}VLYNQ_CLK_SOURCE;
+
-+typedef enum TNETD73XX_POWER_CTRL_tag
++
++/* VLYNQ_DRV_STATE indicates the current driver state */
++typedef enum
+{
-+ POWER_CTRL_POWER_UP = 0,
-+ POWER_CTRL_POWER_DOWN
-+} TNETD73XX_POWER_CTRL_T;
++ VLYNQ_DRV_STATE_UNINIT = 0, /* driver is uninitialized */
++ VLYNQ_DRV_STATE_ININIT = 1, /* VLYNQ is being initialized */
++ VLYNQ_DRV_STATE_RUN = 2, /* VLYNQ is running properly */
++ VLYNQ_DRV_STATE_HOLD = 3, /* driver stopped temporarily */
++ VLYNQ_DRV_STATE_ERROR = 4 /* driver stopped on unrecoverable error */
++}VLYNQ_DRV_STATE;
+
-+typedef enum TNETD73XX_SYS_POWER_MODE_tag
++
++/* VLYNQ_BUS_WIDTH identifies the vlynq module bus width */
++typedef enum
+{
-+ GLOBAL_POWER_MODE_RUN = 0, /* All system is up */
-+ GLOBAL_POWER_MODE_IDLE, /* MIPS is power down, all peripherals working */
-+ GLOBAL_POWER_MODE_STANDBY, /* Chip in power down, but clock to ADSKL subsystem is running */
-+ GLOBAL_POWER_MODE_POWER_DOWN /* Total chip is powered down */
-+} TNETD73XX_SYS_POWER_MODE_T;
++ VLYNQ_BUS_WIDTH_3 = 3,
++ VLYNQ_BUS_WIDTH_5 = 5,
++ VLYNQ_BUS_WIDTH_7 = 7,
++ VLYNQ_BUS_WIDTH_9 = 9
++}VLYNQ_BUS_WIDTH;
+
-+void tnetd73xx_power_ctrl(TNETD73XX_POWER_MODULE_T power_module, TNETD73XX_POWER_CTRL_T power_ctrl);
-+TNETD73XX_POWER_CTRL_T tnetd73xx_get_pwr_status(TNETD73XX_POWER_MODULE_T power_module);
-+void tnetd73xx_set_global_pwr_mode(TNETD73XX_SYS_POWER_MODE_T power_mode);
-+TNETD73XX_SYS_POWER_MODE_T tnetd73xx_get_global_pwr_mode(void);
+
-+/*****************************************************************************
-+ * Wakeup Control
-+ *****************************************************************************/
++/* VLYNQ_LOCAL_INT_CONFIG indicates whether the local vlynq
++ * interrupts are processed by the host or passed on to the
++ * remote device.
++ */
++typedef enum
++{
++ VLYNQ_INT_REMOTE = 0, /* Interrupt packets sent to remote, intlocal=0 */
++ VLYNQ_INT_LOCAL = 1 /* Interrupts are handled locally, intlocal=1 */
++}VLYNQ_LOCAL_INT_CONFIG;
+
-+typedef enum TNETD73XX_WAKEUP_INTERRUPT_tag
++
++/* VLYNQ_REMOTE_INT_CONFIG indicates whether the remote
++ * interrupts are to be handled by the SOC system ISR
++ * or via the vlynq root ISR
++ */
++typedef enum
+{
-+ WAKEUP_INT0 = 1,
-+ WAKEUP_INT1 = 2,
-+ WAKEUP_INT2 = 4,
-+ WAKEUP_INT3 = 8
-+} TNETD73XX_WAKEUP_INTERRUPT_T;
++ VLYNQ_INT_ROOT_ISR = 0, /* remote ints handled via vlynq root ISR */
++ VLYNQ_INT_SYSTEM_ISR = 1 /* remote ints handled via system ISR */
++}VLYNQ_REMOTE_INT_CONFIG;
+
-+typedef enum TNETD73XX_WAKEUP_CTRL_tag
++
++/* VLYNQ_INTR_POLARITY - vlynq interrupt polarity setting */
++typedef enum
+{
-+ WAKEUP_DISABLED = 0,
-+ WAKEUP_ENABLED
-+} TNETD73XX_WAKEUP_CTRL_T;
++ VLYNQ_INTR_ACTIVE_HIGH = 0,
++ VLYNQ_INTR_ACTIVE_LOW = 1
++}VLYNQ_INTR_POLARITY;
+
-+typedef enum TNETD73XX_WAKEUP_POLARITY_tag
++
++/* VLYNQ_INTR_TYPE - vlynq interrupt type */
++typedef enum
+{
-+ WAKEUP_ACTIVE_HIGH = 0,
-+ WAKEUP_ACTIVE_LOW
-+} TNETD73XX_WAKEUP_POLARITY_T;
++ VLYNQ_INTR_LEVEL = 0,
++ VLYNQ_INTR_PULSED = 1
++}VLYNQ_INTR_TYPE;
+
-+void tnetd73xx_wakeup_ctrl(TNETD73XX_WAKEUP_INTERRUPT_T wakeup_int,
-+ TNETD73XX_WAKEUP_CTRL_T wakeup_ctrl,
-+ TNETD73XX_WAKEUP_POLARITY_T wakeup_polarity);
+
-+/*****************************************************************************
-+ * FSER Control
-+ *****************************************************************************/
-+
-+typedef enum TNETD73XX_FSER_MODE_tag
++/* VLYNQ_RESET_MODE - vlynq reset mode */
++typedef enum
+{
-+ FSER_I2C = 0,
-+ FSER_UART = 1
-+} TNETD73XX_FSER_MODE_T;
++ VLYNQ_RESET_ASSERT, /* hold device in reset state */
++ VLYNQ_RESET_DEASSERT, /* release device from reset state */
++ VLYNQ_RESET_INITFAIL, /* handle the device in case driver initialization fails */
++ VLYNQ_RESET_LINKESTABLISH, /* handle the device in case driver established link */
++ VLYNQ_RESET_INITFAIL2, /* Driver initialization failed but VLYNQ link exist. */
++ VLYNQ_RESET_INITOK /* Driver initialization finished OK. */
++}VLYNQ_RESET_MODE;
++
+
-+void tnetd73xx_fser_ctrl(TNETD73XX_FSER_MODE_T fser_mode);
+
-+/*****************************************************************************
-+ * Clock Control
-+ *****************************************************************************/
++/*************************************
++ * Typedefs *
++ *************************************/
+
-+#define CLK_MHZ(x) ( (x) * 1000000 )
++struct VLYNQ_DEV_t; /*forward declaration*/
+
-+typedef enum TNETD73XX_CLKC_ID_tag
++/*--------Function Pointers defintions -----------*/
++
++/* prototype for interrupt handler definition */
++typedef void (*VLYNQ_INTR_CNTRL_ISR)(void *arg1,void *arg2,void *arg3);
++
++typedef void
++(*VLYNQ_RESET_REMOTE)(struct VLYNQ_DEV_t *pDev, VLYNQ_RESET_MODE mode);
++
++typedef void
++(*VLYNQ_REPORT_CB)( struct VLYNQ_DEV_t *pDev, /* This VLYNQ */
++ VLYNQ_DEV_TYPE aSrcDvc, /* Event Cause -local/remote? */
++ UINT32 dwStatRegVal); /* Value of the relevant status register */
++
++
++/*-------Structure Definitions------------*/
++
++typedef struct VLYNQ_MEMORY_MAP_t
+{
-+ CLKC_SYS = 0,
-+ CLKC_MIPS,
-+ CLKC_USB,
-+ CLKC_ADSLSS
-+} TNETD73XX_CLKC_ID_T;
++ UINT32 Txmap;
++ UINT32 RxOffset[VLYNQ_MAX_MEMORY_REGIONS];
++ UINT32 RxSize[VLYNQ_MAX_MEMORY_REGIONS];
++}VLYNQ_MEMORY_MAP;
+
-+void tnetd73xx_clkc_init(__u32 afeclk, __u32 refclk, __u32 xtal3in);
-+TNETD73XX_ERR tnetd73xx_clkc_set_freq(TNETD73XX_CLKC_ID_T clk_id, __u32 output_freq);
-+__u32 tnetd73xx_clkc_get_freq(TNETD73XX_CLKC_ID_T clk_id);
+
-+/*****************************************************************************
-+ * GPIO Control
-+ *****************************************************************************/
++/**VLYNQ_INTERRUPT_CNTRL - defines the vlynq module interrupt
++ * settings in vlynq Control register */
++typedef struct VLYNQ_INTERRUPT_CNTRL_t
++{
++ /* vlynq interrupts handled by host or remote - maps to
++ * intLocal bit in vlynq control register */
++ VLYNQ_LOCAL_INT_CONFIG intLocal;
++
++ /* remote interrupts handled by vlynq isr or host system
++ * interrupt controller - maps to the int2Cfg in vlynq
++ * control register */
++ VLYNQ_REMOTE_INT_CONFIG intRemote;
++
++ /* bit in pending/set register used for module interrupts*/
++ UINT32 map_vector;
++
++ /* used only if remote interrupts are to be handled by system ISR*/
++ UINT32 intr_ptr;
+
-+typedef enum TNETD73XX_GPIO_PIN_tag
++}VLYNQ_INTERRUPT_CNTRL;
++
++
++/* VLYNQ_INTR_CNTRL_ICB - defines the Interrupt control block which hold
++ * the interrupt dispatch table. The vlynq_root_isr() indexes into this
++ * table to identify the ISR to be invoked
++ */
++typedef struct VLYNQ_INTR_CNTRL_ICB_t
+{
-+ GPIO_UART0_RD = 0,
-+ GPIO_UART0_TD = 1,
-+ GPIO_UART0_RTS = 2,
-+ GPIO_UART0_CTS = 3,
-+ GPIO_FSER_CLK = 4,
-+ GPIO_FSER_D = 5,
-+ GPIO_EXT_AFE_SCLK = 6,
-+ GPIO_EXT_AFE_TX_FS = 7,
-+ GPIO_EXT_AFE_TXD = 8,
-+ GPIO_EXT_AFE_RS_FS = 9,
-+ GPIO_EXT_AFE_RXD1 = 10,
-+ GPIO_EXT_AFE_RXD0 = 11,
-+ GPIO_EXT_AFE_CDIN = 12,
-+ GPIO_EXT_AFE_CDOUT = 13,
-+ GPIO_EPHY_SPEED100 = 14,
-+ GPIO_EPHY_LINKON = 15,
-+ GPIO_EPHY_ACTIVITY = 16,
-+ GPIO_EPHY_FDUPLEX = 17,
-+ GPIO_EINT0 = 18,
-+ GPIO_EINT1 = 19,
-+ GPIO_MBSP0_TCLK = 20,
-+ GPIO_MBSP0_RCLK = 21,
-+ GPIO_MBSP0_RD = 22,
-+ GPIO_MBSP0_TD = 23,
-+ GPIO_MBSP0_RFS = 24,
-+ GPIO_MBSP0_TFS = 25,
-+ GPIO_MII_DIO = 26,
-+ GPIO_MII_DCLK = 27,
-+} TNETD73XX_GPIO_PIN_T;
++ VLYNQ_INTR_CNTRL_ISR isr; /* Clear errors during initialization */
++ void *arg1 ; /* Arg 1 for the ISR */
++ void *arg2 ; /* Arg 2 for the ISR */
++ void *arg3 ; /* Arg 3 for the ISR */
++ UINT32 isrCount; /* number of ISR invocations so far */
++ struct VLYNQ_INTR_CNTRL_ICB_t *next;
++}VLYNQ_INTR_CNTRL_ICB;
++
++/* overlay of vlynq register set */
++typedef struct VLYNQ_REG_SET_t
++{
++ UINT32 revision; /*offset : 0x00 */
++ UINT32 control; /* 0x04*/
++ UINT32 status; /* 0x08*/
++ UINT32 pad1; /* 0x0c*/
++ UINT32 intStatus; /*0x10*/
++ UINT32 intPending; /*0x14*/
++ UINT32 intPtr; /*0x18*/
++ UINT32 txMap; /*0x1C*/
++ UINT32 rxSize1; /*0x20*/
++ UINT32 rxOffset1; /*0x24*/
++ UINT32 rxSize2; /*0x28*/
++ UINT32 rxOffset2; /*0x2C*/
++ UINT32 rxSize3; /*0x30*/
++ UINT32 rxOffset3; /*0x34*/
++ UINT32 rxSize4; /*0x38*/
++ UINT32 rxOffset4; /*0x3C*/
++ UINT32 chipVersion; /*0x40*/
++ UINT32 pad2[8];
++ UINT32 ivr30; /*0x60*/
++ UINT32 ivr74; /*0x64*/
++ UINT32 pad3[7];
++}VLYNQ_REG_SET;
++
+
-+typedef enum TNETD73XX_GPIO_PIN_MODE_tag
++typedef struct VLYNQ_DEV_t
+{
-+ FUNCTIONAL_PIN = 0,
-+ GPIO_PIN = 1
-+} TNETD73XX_GPIO_PIN_MODE_T;
++ /** module index:1,2,3... used for debugging purposes */
++ UINT32 dev_idx;
++
++ /*VLYNQ module base address */
++ UINT32 module_base;
++
++ /* clock source selection */
++ VLYNQ_CLK_SOURCE clk_source;
++
++ /* Clock Divider.Val=1 to 8. VLYNQ_clk = VBUSCLK/clk_div */
++ UINT32 clk_div;
++
++ /* State of the VLYNQ driver, set to VLYNQ_DRV_STATE_UNINIT, when initializing */
++ VLYNQ_DRV_STATE state;
++
++ /* Valid VLYNQ bus width, filled by driver */
++ VLYNQ_BUS_WIDTH width;
++
++ /* local memory mapping */
++ VLYNQ_MEMORY_MAP local_mem;
++
++ /* remote memory mapping */
++ VLYNQ_MEMORY_MAP remote_mem;
++
++ /* Local module interrupt params */
++ VLYNQ_INTERRUPT_CNTRL local_irq;
++
++ /* remote module interrupt params */
++ VLYNQ_INTERRUPT_CNTRL remote_irq;
+
-+typedef enum TNETD73XX_GPIO_PIN_DIRECTION_tag
++ /*** ICB related fields **/
++
++ /* Sizeof of ICB = VLYNQ_NUM_INT_BITS(for 32 bits in IntPending) +
++ * expansion slots for shared interrupts*/
++ VLYNQ_INTR_CNTRL_ICB pIntrCB[VLYNQ_NUM_INT_BITS + VLYNQ_IVR_CHAIN_SLOTS];
++ VLYNQ_INTR_CNTRL_ICB *freelist;
++
++ /* table holding mapping between intVector and the bit position the interrupt
++ * is mapped to(mapVector)*/
++ INT8 vector_map[32];
++
++ /* user callback for vlynq events, NULL if unused */
++ VLYNQ_REPORT_CB report_cb;
++
++ /* user callback for resetting/realeasing remote device */
++ VLYNQ_RESET_REMOTE reset_cb;
++
++ /*** Handles provided for direct access to register set if need be
++ * Must be intialized to point to appropriate address during
++ * vlynq_init */
++ volatile VLYNQ_REG_SET * local;
++ volatile VLYNQ_REG_SET * remote;
++
++ UINT32 intCount; /* number of interrupts generated so far */
++ UINT32 isrCount; /* number of ISR invocations so far */
++}VLYNQ_DEV;
++
++
++typedef struct VLYNQ_ISR_ARGS_t
+{
-+ GPIO_OUTPUT_PIN = 0,
-+ GPIO_INPUT_PIN = 1
-+} TNETD73XX_GPIO_PIN_DIRECTION_T;
-+
-+void tnetd73xx_gpio_init(void);
-+void tnetd73xx_gpio_ctrl(TNETD73XX_GPIO_PIN_T gpio_pin,
-+ TNETD73XX_GPIO_PIN_MODE_T pin_mode,
-+ TNETD73XX_GPIO_PIN_DIRECTION_T pin_direction);
-+void tnetd73xx_gpio_out(TNETD73XX_GPIO_PIN_T gpio_pin, int value);
-+int tnetd73xx_gpio_in(TNETD73XX_GPIO_PIN_T gpio_pin);
++ int irq;
++ void * arg;
++ void * regset;
++}VLYNQ_ISR_ARGS;
+
-+/* TNETD73XX Revision */
-+__u32 tnetd73xx_get_revision(void);
+
-+#endif /* __TNETD73XX_MISC_H__ */
++/****************************************
++ * Function Prototypes *
++ * API exported by generic vlynq driver *
++ ****************************************/
++/* Initialization function */
++GLOBAL INT32 vlynq_init( VLYNQ_DEV *pdev, VLYNQ_INIT_OPTIONS options);
++
++/* Check vlynq link */
++GLOBAL UINT32 vlynq_link_check( VLYNQ_DEV * pdev);
++
++/* Set interrupt vector in local or remote device */
++GLOBAL INT32 vlynq_interrupt_vector_set( VLYNQ_DEV *pdev,
++ UINT32 int_vector,
++ UINT32 map_vector,
++ VLYNQ_DEV_TYPE dev,
++ VLYNQ_INTR_POLARITY pol,
++ VLYNQ_INTR_TYPE type);
++
++
++GLOBAL INT32 vlynq_interrupt_vector_cntl( VLYNQ_DEV *pdev,
++ UINT32 int_vector,
++ VLYNQ_DEV_TYPE dev,
++ UINT32 enable);
++
++GLOBAL UINT32 vlynq_interrupt_get_count( VLYNQ_DEV *pdev,
++ UINT32 map_vector);
++
++GLOBAL INT32 vlynq_install_isr( VLYNQ_DEV *pdev,
++ UINT32 map_vector,
++ VLYNQ_INTR_CNTRL_ISR isr,
++ void *arg1, void *arg2, void *arg3);
++
++GLOBAL INT32 vlynq_uninstall_isr( VLYNQ_DEV *pdev,
++ UINT32 map_vector,
++ void *arg1, void *arg2, void *arg3);
++
++
++GLOBAL void vlynq_root_isr(void *arg);
++
++GLOBAL void vlynq_delay(UINT32 clktime);
++
++/* The following functions, provide better granularity in setting
++ * interrupt parameters. (for better support of linux INT Controller)
++ * Note: The interrupt source is identified by "map_vector"- the bit
++ * position in interrupt status register*/
++
++GLOBAL INT32 vlynq_interrupt_vector_map(VLYNQ_DEV * pdev,
++ VLYNQ_DEV_TYPE dev,
++ UINT32 int_vector,
++ UINT32 map_vector);
++
++GLOBAL INT32 vlynq_interrupt_set_polarity(VLYNQ_DEV * pdev,
++ VLYNQ_DEV_TYPE dev,
++ UINT32 map_vector,
++ VLYNQ_INTR_POLARITY pol);
++
++GLOBAL INT32 vlynq_interrupt_get_polarity( VLYNQ_DEV *pdev ,
++ VLYNQ_DEV_TYPE dev_type,
++ UINT32 map_vector);
++
++GLOBAL INT32 vlynq_interrupt_set_type(VLYNQ_DEV * pdev,
++ VLYNQ_DEV_TYPE dev,
++ UINT32 map_vector,
++ VLYNQ_INTR_TYPE type);
++
++GLOBAL INT32 vlynq_interrupt_get_type( VLYNQ_DEV *pdev,
++ VLYNQ_DEV_TYPE dev_type,
++ UINT32 map_vector);
++
++GLOBAL INT32 vlynq_interrupt_enable(VLYNQ_DEV* pdev,
++ VLYNQ_DEV_TYPE dev,
++ UINT32 map_vector);
++
++GLOBAL INT32 vlynq_interrupt_disable(VLYNQ_DEV * pdev,
++ VLYNQ_DEV_TYPE dev,
++ UINT32 map_vector);
++
++
++
++
++
++#endif /* _VLYNQ_HAL_H_ */
+diff -urN linux.old/include/asm-mips/ar7/vlynq_hal_params.h linux.dev/include/asm-mips/ar7/vlynq_hal_params.h
+--- linux.old/include/asm-mips/ar7/vlynq_hal_params.h 1970-01-01 01:00:00.000000000 +0100
++++ linux.dev/include/asm-mips/ar7/vlynq_hal_params.h 2005-11-10 01:10:46.095590250 +0100
+@@ -0,0 +1,50 @@
++/***************************************************************************
++**+----------------------------------------------------------------------+**
++**| **** |**
++**| **** |**
++**| ******o*** |**
++**| ********_///_**** |**
++**| ***** /_//_/ **** |**
++**| ** ** (__/ **** |**
++**| ********* |**
++**| **** |**
++**| *** |**
++**| |**
++**| Copyright (c) 2003 Texas Instruments Incorporated |**
++**| ALL RIGHTS RESERVED |**
++**| |**
++**| Permission is hereby granted to licensees of Texas Instruments |**
++**| Incorporated (TI) products to use this computer program for the sole |**
++**| purpose of implementing a licensee product based on TI products. |**
++**| No other rights to reproduce, use, or disseminate this computer |**
++**| program, whether in part or in whole, are granted. |**
++**| |**
++**| TI makes no representation or warranties with respect to the |**
++**| performance of this computer program, and specifically disclaims |**
++**| any responsibility for any damages, special or consequential, |**
++**| connected with the use of this program. |**
++**| |**
++**+----------------------------------------------------------------------+**
++***************************************************************************/
++
++/* This file defines Vlynq module parameters*/
++
++#ifndef _VLYNQ_HAL_PARAMS_H
++#define _VLYNQ_HAL_PARAMS_H
++
++ /* number of VLYNQ memory regions supported */
++#define VLYNQ_MAX_MEMORY_REGIONS 0x04
++
++ /* Max.number of external interrupt inputs supported by VLYNQ module */
++#define VLYNQ_IVR_MAXIVR 0x08
++
++#define VLYNQ_CLK_DIV_MAX 0x08
++#define VLYNQ_CLK_DIV_MIN 0x01
++
++
++/*** the total number of entries allocated for ICB would be
++ * 32(for 32 bits in IntPending register) + VLYNQ_IVR_CHAIN_SLOTS*/
++#define VLYNQ_IVR_CHAIN_SLOTS 10
++
++
++#endif /* _VLYNQ_HAL_PARAMS_H */
diff -urN linux.old/include/asm-mips/io.h linux.dev/include/asm-mips/io.h
---- linux.old/include/asm-mips/io.h 2005-07-10 03:00:44.797179400 +0200
-+++ linux.dev/include/asm-mips/io.h 2005-07-12 02:59:26.202667008 +0200
-@@ -63,8 +63,12 @@
+--- linux.old/include/asm-mips/io.h 2003-08-25 13:44:43.000000000 +0200
++++ linux.dev/include/asm-mips/io.h 2005-11-10 01:14:16.400733500 +0100
+@@ -61,9 +61,9 @@
+ * Change "struct page" to physical address.
+ */
#ifdef CONFIG_64BIT_PHYS_ADDR
- #define page_to_phys(page) ((u64)(page - mem_map) << PAGE_SHIFT)
+-#define page_to_phys(page) ((u64)(page - mem_map) << PAGE_SHIFT)
++#define page_to_phys(page) (((u64)(page - mem_map) << PAGE_SHIFT) + PHYS_OFFSET)
#else
-+#ifdef CONFIG_AR7_PAGING
-+#define page_to_phys(page) (((page - mem_map) << PAGE_SHIFT) + CONFIG_AR7_MEMORY)
-+#else
- #define page_to_phys(page) ((page - mem_map) << PAGE_SHIFT)
+-#define page_to_phys(page) ((page - mem_map) << PAGE_SHIFT)
++#define page_to_phys(page) (((page - mem_map) << PAGE_SHIFT) + PHYS_OFFSET)
#endif
-+#endif
#define IO_SPACE_LIMIT 0xffff
-
diff -urN linux.old/include/asm-mips/irq.h linux.dev/include/asm-mips/irq.h
---- linux.old/include/asm-mips/irq.h 2005-07-10 03:00:44.798179248 +0200
-+++ linux.dev/include/asm-mips/irq.h 2005-07-12 02:59:26.202667008 +0200
-@@ -14,7 +14,12 @@
+--- linux.old/include/asm-mips/irq.h 2003-08-25 13:44:43.000000000 +0200
++++ linux.dev/include/asm-mips/irq.h 2005-11-10 01:12:43.950955750 +0100
+@@ -14,7 +14,20 @@
#include <linux/config.h>
#include <linux/linkage.h>
+#ifdef CONFIG_AR7
-+#include <asm/ar7/avalanche_intc.h>
-+#define NR_IRQS AVALANCHE_INT_END + 1
++/* MIPS has 8 irqs
++ * AR7 has 40 primary and 32 secondary irqs
++ * vlynq0 has 32 irqs
++ * vlynq1 has 32 irqs
++ */
++#ifdef CONFIG_AR7_VLYNQ
++#define NR_IRQS (80 + 32 * CONFIG_AR7_VLYNQ_PORTS)
++#else
++#define NR_IRQS 80
++#endif
+#else
#define NR_IRQS 128 /* Largest number of ints of all machines. */
+#endif
#ifdef CONFIG_I8259
static inline int irq_cannonicalize(int irq)
+diff -urN linux.old/include/asm-mips/mips-boards/prom.h linux.dev/include/asm-mips/mips-boards/prom.h
+--- linux.old/include/asm-mips/mips-boards/prom.h 2001-09-09 19:43:02.000000000 +0200
++++ linux.dev/include/asm-mips/mips-boards/prom.h 2005-11-10 01:14:16.436735750 +0100
+@@ -33,7 +33,7 @@
+ extern void prom_init_cmdline(void);
+ extern void prom_meminit(void);
+ extern void prom_fixup_mem_map(unsigned long start_mem, unsigned long end_mem);
+-extern void prom_free_prom_memory (void);
++extern unsigned long prom_free_prom_memory (void);
+ extern void mips_display_message(const char *str);
+ extern void mips_display_word(unsigned int num);
+ extern int get_ethernet_addr(char *ethernet_addr);
diff -urN linux.old/include/asm-mips/page.h linux.dev/include/asm-mips/page.h
---- linux.old/include/asm-mips/page.h 2005-07-10 03:00:44.798179248 +0200
-+++ linux.dev/include/asm-mips/page.h 2005-07-12 02:59:26.202667008 +0200
-@@ -129,7 +129,11 @@
+--- linux.old/include/asm-mips/page.h 2004-02-18 14:36:32.000000000 +0100
++++ linux.dev/include/asm-mips/page.h 2005-11-10 01:14:16.436735750 +0100
+@@ -12,6 +12,7 @@
+
+ #include <linux/config.h>
+ #include <asm/break.h>
++#include <asm/addrspace.h>
+
+ #ifdef __KERNEL__
+
+@@ -129,7 +130,7 @@
#define __pa(x) ((unsigned long) (x) - PAGE_OFFSET)
#define __va(x) ((void *)((unsigned long) (x) + PAGE_OFFSET))
-+#ifdef CONFIG_AR7_PAGING
-+#define virt_to_page(kaddr) phys_to_page(__pa(kaddr))
-+#else
- #define virt_to_page(kaddr) (mem_map + (__pa(kaddr) >> PAGE_SHIFT))
-+#endif
+-#define virt_to_page(kaddr) (mem_map + (__pa(kaddr) >> PAGE_SHIFT))
++#define virt_to_page(kaddr) (mem_map + ((__pa(kaddr)-PHYS_OFFSET) >> PAGE_SHIFT))
#define VALID_PAGE(page) ((page - mem_map) < max_mapnr)
#define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_EXEC | \
diff -urN linux.old/include/asm-mips/pgtable-32.h linux.dev/include/asm-mips/pgtable-32.h
---- linux.old/include/asm-mips/pgtable-32.h 2005-07-10 03:00:44.798179248 +0200
-+++ linux.dev/include/asm-mips/pgtable-32.h 2005-07-12 02:59:26.203666856 +0200
-@@ -108,7 +108,18 @@
+--- linux.old/include/asm-mips/pgtable-32.h 2004-02-18 14:36:32.000000000 +0100
++++ linux.dev/include/asm-mips/pgtable-32.h 2005-11-10 01:14:16.436735750 +0100
+@@ -108,7 +108,7 @@
* and a page entry and page directory to the page they refer to.
*/
-#ifdef CONFIG_CPU_VR41XX
-+#if defined(CONFIG_AR7_PAGING)
-+#define mk_pte(page, pgprot) \
-+({ \
-+ pte_t __pte; \
-+ \
-+ pte_val(__pte) = ((phys_t)(page - mem_map) << (PAGE_SHIFT) | \
-+ CONFIG_AR7_MEMORY) | \
-+ pgprot_val(pgprot); \
-+ \
-+ __pte; \
-+})
-+#elif defined(CONFIG_CPU_VR41XX)
++#if defined(CONFIG_CPU_VR41XX)
#define mk_pte(page, pgprot) \
({ \
pte_t __pte; \
-@@ -130,6 +141,7 @@
+@@ -123,13 +123,14 @@
+ ({ \
+ pte_t __pte; \
+ \
+- pte_val(__pte) = ((phys_t)(page - mem_map) << PAGE_SHIFT) | \
+- pgprot_val(pgprot); \
++ pte_val(__pte) = (((phys_t)(page - mem_map) << PAGE_SHIFT) + \
++ PHYS_OFFSET) | pgprot_val(pgprot); \
+ \
+ __pte; \
})
#endif
static inline pte_t mk_pte_phys(phys_t physpage, pgprot_t pgprot)
{
#ifdef CONFIG_CPU_VR41XX
-@@ -175,7 +187,10 @@
+@@ -175,12 +176,12 @@
set_pte(ptep, __pte(0));
}
-#ifdef CONFIG_CPU_VR41XX
-+#if defined(CONFIG_AR7_PAGING)
-+#define phys_to_page(phys) (mem_map + (((phys)-CONFIG_AR7_MEMORY) >> PAGE_SHIFT))
-+#define pte_page(x) phys_to_page(pte_val(x))
-+#elif defined(CONFIG_CPU_VR41XX)
++#if defined(CONFIG_CPU_VR41XX)
#define pte_page(x) (mem_map+((unsigned long)(((x).pte_low >> (PAGE_SHIFT+2)))))
#define __mk_pte(page_nr,pgprot) __pte(((page_nr) << (PAGE_SHIFT+2)) | pgprot_val(pgprot))
#else
+-#define pte_page(x) (mem_map+((unsigned long)(((x).pte_low >> PAGE_SHIFT))))
+-#define __mk_pte(page_nr,pgprot) __pte(((page_nr) << PAGE_SHIFT) | pgprot_val(pgprot))
++#define pte_page(x) (mem_map+((unsigned long)((((x).pte_low-PHYS_OFFSET) >> PAGE_SHIFT))))
++#define __mk_pte(page_nr,pgprot) __pte((((page_nr) << PAGE_SHIFT)+PHYS_OFFSET)|pgprot_val(pgprot))
+ #endif
+
+ #endif
diff -urN linux.old/include/asm-mips/serial.h linux.dev/include/asm-mips/serial.h
---- linux.old/include/asm-mips/serial.h 2005-07-10 03:00:44.799179096 +0200
-+++ linux.dev/include/asm-mips/serial.h 2005-07-12 02:59:26.203666856 +0200
-@@ -65,6 +65,15 @@
+--- linux.old/include/asm-mips/serial.h 2005-01-19 15:10:12.000000000 +0100
++++ linux.dev/include/asm-mips/serial.h 2005-11-10 01:14:16.436735750 +0100
+@@ -65,6 +65,16 @@
#define C_P(card,port) (((card)<<6|(port)<<3) + 1)
+#ifdef CONFIG_AR7
+#include <asm/ar7/ar7.h>
++#include <asm/ar7/avalanche_intc.h>
+#define AR7_SERIAL_PORT_DEFNS \
+ { 0, AR7_BASE_BAUD, AR7_UART0_REGS_BASE, LNXINTNUM(AVALANCHE_UART0_INT), STD_COM_FLAGS }, \
+ { 0, AR7_BASE_BAUD, AR7_UART1_REGS_BASE, LNXINTNUM(AVALANCHE_UART1_INT), STD_COM_FLAGS },
#ifdef CONFIG_MIPS_JAZZ
#define _JAZZ_SERIAL_INIT(int, base) \
{ .baud_base = JAZZ_BASE_BAUD, .irq = int, .flags = STD_COM_FLAGS, \
-@@ -468,6 +477,7 @@
+@@ -468,6 +478,7 @@
#endif
#define SERIAL_PORT_DFNS \
ATLAS_SERIAL_PORT_DEFNS \
AU1000_SERIAL_PORT_DEFNS \
COBALT_SERIAL_PORT_DEFNS \
-diff -urN linux.old/Makefile linux.dev/Makefile
---- linux.old/Makefile 2005-07-10 03:00:44.799179096 +0200
-+++ linux.dev/Makefile 2005-07-12 02:59:26.204666704 +0200
-@@ -91,7 +91,7 @@
-
- CPPFLAGS := -D__KERNEL__ -I$(HPATH)
-
--CFLAGS := $(CPPFLAGS) -Wall -Wstrict-prototypes -Wno-trigraphs -O2 \
-+CFLAGS := $(CPPFLAGS) -Wall -Wstrict-prototypes -Wno-trigraphs -Os \
- -fno-strict-aliasing -fno-common
- ifndef CONFIG_FRAME_POINTER
- CFLAGS += -fomit-frame-pointer
projects / openwrt.git / blobdiff