strip the kernel version suffix from target directories, except for brcm-2.4 (the...

[openwrt.git] / target / linux / adm5120-2.6 / files / include / asm-mips / mach-adm5120 / adm5120_uart.h

diff --git a/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/adm5120_uart.h b/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/adm5120_uart.h
deleted file mode 100755 (executable)
index 89c48de..0000000
--- a/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/adm5120_uart.h
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- *  ADM5120 UART definitions
- *
- *  This header file defines the hardware registers of the ADM5120 SoC
- *  built-in UARTs.
- *
- *  Copyright (C) 2007 OpenWrt.org
- *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version 2
- *  of the License, or (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the
- *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
- *  Boston, MA  02110-1301, USA.
- */
-
-#ifndef _ADM5120_UART_H_
-#define _ADM5120_UART_H_
-
-#define UART_BAUDDIV(clk, baud) ((clk/(16 * (baud)))-1)
-
-#define UART_REG_DATA  0x00
-#define UART_REG_RSR   0x04
-#define UART_REG_ECR   UART_REG_RSR
-#define UART_REG_LCRH  0x08
-#define UART_REG_LCRM  0x0C
-#define UART_REG_LCRL  0x10
-#define UART_REG_CTRL  0x14
-#define UART_REG_FLAG  0x18
-
-/* Receive Status Register bits */
-#define UART_RSR_FE    ( 1 << 0 )
-#define UART_RSR_PE    ( 1 << 1 )
-#define UART_RSR_BE    ( 1 << 2 )
-#define UART_RSR_OE    ( 1 << 3 )
-#define UART_RSR_ERR   ( UART_RSR_FE | UART_RSR_PE | UART_RSR_BE )
-
-#define UART_ECR_ALL   0xFF
-
-/* Line Control High register bits */
-#define UART_LCRH_BRK  ( 1 << 0 ) /* send break */
-#define UART_LCRH_PEN  ( 1 << 1 ) /* parity enable */
-#define UART_LCRH_EPS  ( 1 << 2 ) /* even parity select */
-#define UART_LCRH_STP1 ( 0 << 3 ) /* one stop bits select */
-#define UART_LCRH_STP2 ( 1 << 3 ) /* two stop bits select */
-#define UART_LCRH_FEN  ( 1 << 4 ) /* FIFO enable */
-
-#define UART_LCRH_WLEN5        ( 0 << 5 )
-#define UART_LCRH_WLEN6        ( 1 << 5 )
-#define UART_LCRH_WLEN7        ( 2 << 5 )
-#define UART_LCRH_WLEN8        ( 3 << 5 )
-
-/* Control register bits */
-#define UART_CTRL_EN   ( 1 << 0 )
-
-/* Flag register bits */
-#define UART_FLAG_CTS  ( 1 << 0 )
-#define UART_FLAG_DSR  ( 1 << 1 )
-#define UART_FLAG_DCD  ( 1 << 2 )
-#define UART_FLAG_BUSY ( 1 << 3 )
-#define UART_FLAG_RXFE ( 1 << 4 )
-#define UART_FLAG_TXFF ( 1 << 5 )
-#define UART_FLAG_RXFF ( 1 << 6 )
-#define UART_FLAG_TXFE ( 1 << 7 )
-
-#endif /* _ADM5120_UART_H_ */