strip the kernel version suffix from target directories, except for brcm-2.4 (the...
[openwrt.git] / target / linux / ar7-2.6 / files / arch / mips / ar7 / vlynq-pci.c
diff --git a/target/linux/ar7-2.6/files/arch/mips/ar7/vlynq-pci.c b/target/linux/ar7-2.6/files/arch/mips/ar7/vlynq-pci.c
deleted file mode 100644 (file)
index eb11a3b..0000000
+++ /dev/null
@@ -1,402 +0,0 @@
-/*
- * $Id$
- * 
- * Copyright (C) 2006, 2007 OpenWrt.org
- * 
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- * 
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- * 
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <asm/ar7/vlynq.h>
-
-#define VLYNQ_PCI_SLOTS 2
-
-struct vlynq_reg_config {
-       u32 offset;
-       u32 value;
-};
-
-struct vlynq_pci_config {
-       u32 chip_id;
-       char name[32];
-       struct vlynq_mapping rx_mapping[4];
-       int irq;
-       int irq_type;
-       u32 chip;
-       u32 class;
-       int num_regs;
-       struct vlynq_reg_config regs[10];
-};
-
-struct vlynq_pci_private {
-       u32 latency;
-       u32 cache_line;
-       u32 command;
-       u32 sz_mask;
-       struct vlynq_pci_config *config;
-};
-
-static struct vlynq_pci_config known_devices[] = {
-       {
-               .chip_id = 0x00000009, .name = "TI ACX111",
-               .rx_mapping = {
-                       { .size = 0x22000, .offset = 0xf0000000 },
-                       { .size = 0x40000, .offset = 0xc0000000 },
-                       { .size = 0x0, .offset = 0x0 },
-                       { .size = 0x0, .offset = 0x0 },
-               },
-               .irq = 0, .chip = 0x9066104c,
-               .irq_type = IRQ_TYPE_EDGE_RISING,
-               .class = PCI_CLASS_NETWORK_OTHER,
-               .num_regs = 5,
-               .regs = { 
-                       { .offset = 0x790, .value = (0xd0000000 - (ARCH_PFN_OFFSET << PAGE_SHIFT)) },
-                       { .offset = 0x794, .value = (0xd0000000 - (ARCH_PFN_OFFSET << PAGE_SHIFT)) },
-                       { .offset = 0x740, .value = 0 },
-                       { .offset = 0x744, .value = 0x00010000 },
-                       { .offset = 0x764, .value = 0x00010000 },
-               },
-       },
-};
-
-static struct vlynq_device *slots[VLYNQ_PCI_SLOTS] = { NULL, };
-
-static struct resource vlynq_io_resource = {
-       .start  = 0x00000000,
-       .end    = 0x00000000,
-       .name   = "pci IO space",
-       .flags  = IORESOURCE_IO
-};
-
-static struct resource vlynq_mem_resource = {
-       .start  = 0x00000000,
-       .end    = 0x00000000,
-       .name   = "pci memory space",
-       .flags  = IORESOURCE_MEM
-};
-
-static inline u32 vlynq_get_mapped(struct vlynq_device *dev, int res)
-{
-       int i;
-       struct vlynq_pci_private *priv = dev->priv;
-       u32 ret = dev->mem_start;
-       if (!priv->config->rx_mapping[res].size) return 0;
-       for (i = 0; i < res; i++)
-               ret += priv->config->rx_mapping[i].size;
-
-       return ret;
-}
-
-static inline u32 vlynq_read(u32 val, int size) {
-       switch (size) {
-       case 1:
-               return *(u8 *)&val;
-       case 2:
-               return *(u16 *)&val;
-       }
-       return val;
-}
-
-static int vlynq_config_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *val)
-{
-       struct vlynq_device *dev;
-       struct vlynq_pci_private *priv;
-       int resno, slot = PCI_SLOT(devfn);
-
-       if ((size == 2) && (where & 1))
-               return PCIBIOS_BAD_REGISTER_NUMBER;
-       else if ((size == 4) && (where & 3))
-               return PCIBIOS_BAD_REGISTER_NUMBER;
-
-       if (slot >= VLYNQ_PCI_SLOTS)
-               return PCIBIOS_DEVICE_NOT_FOUND;
-
-       dev = slots[slot];
-
-       if (!dev || (PCI_FUNC(devfn) > 0))
-               return PCIBIOS_DEVICE_NOT_FOUND;
-
-       priv = dev->priv;
-
-       switch (where) {
-       case PCI_VENDOR_ID:
-               *val = vlynq_read(priv->config->chip, size);
-               break;
-       case PCI_DEVICE_ID:
-               *val = priv->config->chip & 0xffff;
-       case PCI_COMMAND:
-               *val = priv->command;
-       case PCI_STATUS:
-/*             *val = PCI_STATUS_CAP_LIST;*/
-               *val = 0;
-               break;
-       case PCI_CLASS_REVISION:
-               *val = priv->config->class;
-               break;
-       case PCI_LATENCY_TIMER:
-               *val = priv->latency;
-               break;
-       case PCI_HEADER_TYPE:
-               *val = PCI_HEADER_TYPE_NORMAL;
-               break;
-       case PCI_CACHE_LINE_SIZE:
-               *val = priv->cache_line;
-               break;
-       case PCI_BASE_ADDRESS_0:
-       case PCI_BASE_ADDRESS_1:
-       case PCI_BASE_ADDRESS_2:
-       case PCI_BASE_ADDRESS_3:
-               resno = (where - PCI_BASE_ADDRESS_0) >> 2;
-               if (priv->sz_mask & (1 << resno)) {
-                       priv->sz_mask &= ~(1 << resno);
-                       *val = priv->config->rx_mapping[resno].size;
-               } else {
-                       *val = vlynq_get_mapped(dev, resno);
-               }
-               break;
-       case PCI_BASE_ADDRESS_4:
-       case PCI_BASE_ADDRESS_5:
-       case PCI_SUBSYSTEM_VENDOR_ID:
-       case PCI_SUBSYSTEM_ID:
-       case PCI_ROM_ADDRESS:
-       case PCI_INTERRUPT_LINE:
-       case PCI_CARDBUS_CIS:
-       case PCI_CAPABILITY_LIST:
-               *val = 0;
-               break;
-       case PCI_INTERRUPT_PIN:
-               *val = 1;
-               break;
-       default:
-               printk("%s: Read of unknown register 0x%x (size %d)\n", 
-                      dev->dev.bus_id, where, size);
-               return PCIBIOS_BAD_REGISTER_NUMBER;
-       }
-       return PCIBIOS_SUCCESSFUL;
-}
-
-static int vlynq_config_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val)
-{
-       struct vlynq_device *dev;
-       struct vlynq_pci_private *priv;
-       int resno, slot = PCI_SLOT(devfn);
-
-       if ((size == 2) && (where & 1))
-               return PCIBIOS_BAD_REGISTER_NUMBER;
-       else if ((size == 4) && (where & 3))
-               return PCIBIOS_BAD_REGISTER_NUMBER;
-
-       if (slot >= VLYNQ_PCI_SLOTS)
-               return PCIBIOS_DEVICE_NOT_FOUND;
-
-       dev = slots[slot];
-
-       if (!dev || (PCI_FUNC(devfn) > 0))
-               return PCIBIOS_DEVICE_NOT_FOUND;
-
-       priv = dev->priv;
-
-       switch (where) {
-       case PCI_VENDOR_ID:
-       case PCI_DEVICE_ID:
-       case PCI_STATUS:
-       case PCI_CLASS_REVISION:
-       case PCI_HEADER_TYPE:
-       case PCI_CACHE_LINE_SIZE:
-       case PCI_SUBSYSTEM_VENDOR_ID:
-       case PCI_SUBSYSTEM_ID:
-       case PCI_INTERRUPT_LINE:
-       case PCI_INTERRUPT_PIN:
-       case PCI_CARDBUS_CIS:
-       case PCI_CAPABILITY_LIST:
-               return PCIBIOS_FUNC_NOT_SUPPORTED;
-       case PCI_COMMAND:
-               priv->command = val;
-       case PCI_LATENCY_TIMER:
-               priv->latency = val;
-               break;
-       case PCI_BASE_ADDRESS_0:
-       case PCI_BASE_ADDRESS_1:
-       case PCI_BASE_ADDRESS_2:
-       case PCI_BASE_ADDRESS_3:
-               if (val == 0xffffffff) {
-                       resno = (where - PCI_BASE_ADDRESS_0) >> 2;
-                       priv->sz_mask |= (1 << resno);
-                       break;
-               }
-       case PCI_BASE_ADDRESS_4:
-       case PCI_BASE_ADDRESS_5:
-       case PCI_ROM_ADDRESS:
-               break;
-       default:
-               printk("%s: Write to unknown register 0x%x (size %d) value=0x%x\n", 
-                      dev->dev.bus_id, where, size, val);
-               return PCIBIOS_BAD_REGISTER_NUMBER;
-       }
-       return PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops vlynq_pci_ops = {
-       vlynq_config_read,
-       vlynq_config_write
-};
-
-static struct pci_controller vlynq_controller = {
-       .pci_ops        = &vlynq_pci_ops,
-       .io_resource    = &vlynq_io_resource,
-       .mem_resource   = &vlynq_mem_resource,
-};
-
-static int vlynq_pci_probe(struct vlynq_device *dev)
-{
-       int result, i;
-       u32 chip_id, addr;
-       struct vlynq_pci_private *priv;
-       struct vlynq_mapping mapping[4] = { { 0, }, };
-       struct vlynq_pci_config *config = NULL;
-
-       result = vlynq_set_local_irq(dev, 31);
-       if (result)
-               return result;
-
-       result = vlynq_set_remote_irq(dev, 30);
-       if (result)
-               return result;
-
-       result = vlynq_device_enable(dev);
-       if (result)
-               return result;
-
-       chip_id = vlynq_remote_id(dev);
-       for (i = 0; i < ARRAY_SIZE(known_devices); i++)
-               if (chip_id == known_devices[i].chip_id)
-                       config = &known_devices[i];
-
-       if (!config) {
-               printk("vlynq-pci: skipping unknown device "
-                      "%04x:%04x at %s\n", chip_id >> 16, 
-                      chip_id & 0xffff, dev->dev.bus_id);
-               result = -ENODEV;
-               goto fail;
-       }
-
-       printk("vlynq-pci: attaching device %s at %s\n",
-              config->name, dev->dev.bus_id);
-
-       priv = kmalloc(sizeof(struct vlynq_pci_private), GFP_KERNEL);
-       if (!priv) {
-               printk(KERN_ERR "%s: failed to allocate private data\n",
-                      dev->dev.bus_id);
-               result = -ENOMEM;
-               goto fail;
-       }
-
-       memset(priv, 0, sizeof(struct vlynq_pci_private));
-       priv->latency = 64;
-       priv->cache_line = 32;
-       priv->config = config;
-
-       mapping[0].offset = ARCH_PFN_OFFSET << PAGE_SHIFT;
-       mapping[0].size = 0x02000000;
-       vlynq_set_local_mapping(dev, dev->mem_start, mapping);
-       vlynq_set_remote_mapping(dev, 0, config->rx_mapping);
-
-       set_irq_type(vlynq_virq_to_irq(dev, config->irq), config->irq_type);
-
-       addr = (u32)ioremap_nocache(dev->mem_start, 0x10000);
-       if (!addr) {
-               printk(KERN_ERR "%s: failed to remap io memory\n",
-                      dev->dev.bus_id);
-               result = -ENXIO;
-               goto fail;
-       }
-
-       for (i = 0; i < config->num_regs; i++)
-               *(volatile u32 *)(addr + config->regs[i].offset) =
-                       config->regs[i].value;
-
-       dev->priv = priv;
-       for (i = 0; i < VLYNQ_PCI_SLOTS; i++) {
-               if (!slots[i]) {
-                       slots[i] = dev;
-                       break;
-               }
-       }
-
-       return 0;
-
-fail:
-       vlynq_device_disable(dev);
-
-       return result;
-}
-
-static int vlynq_pci_remove(struct vlynq_device *dev)
-{
-       int i;
-       struct vlynq_pci_private *priv = dev->priv;
-
-       for (i = 0; i < VLYNQ_PCI_SLOTS; i++)
-               if (slots[i] == dev)
-                       slots[i] = NULL;
-
-       vlynq_device_disable(dev);
-       kfree(priv);
-
-       return 0;
-}
-
-static struct vlynq_driver vlynq_pci = {
-       .name = "PCI over VLYNQ emulation",
-       .probe = vlynq_pci_probe,
-       .remove = vlynq_pci_remove,
-};
-
-int vlynq_pci_init(void)
-{
-       int res;
-       res = vlynq_register_driver(&vlynq_pci);
-       if (res) 
-               return res;
-
-       register_pci_controller(&vlynq_controller);
-
-       return 0;
-}
-
-int pcibios_map_irq(struct pci_dev *pdev, u8 slot, u8 pin)
-{
-       struct vlynq_device *dev;
-       struct vlynq_pci_private *priv;
-
-       dev = slots[slot];
-
-       if (!dev)
-               return 0;
-
-       priv = dev->priv;
-
-       return vlynq_virq_to_irq(dev, priv->config->irq);
-}
-                                                                        
-/* Do platform specific device initialization at pci_enable_device() time */
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
-       return 0;
-}
This page took 0.033064 seconds and 4 git commands to generate.