add pppoe fix from whiterussian

[openwrt.git] / openwrt / docs / buildroot-documentation.html

diff --git a/openwrt/docs/buildroot-documentation.html b/openwrt/docs/buildroot-documentation.html
index 5a8bb7a..85cce47 100644 (file)
--- a/openwrt/docs/buildroot-documentation.html
+++ b/openwrt/docs/buildroot-documentation.html
@@ -15,7 +15,7 @@
       <h1>OpenWrt Buildroot</h1>
     </div>
 
       <h1>OpenWrt Buildroot</h1>
     </div>
 

-    <p>Usage and documentation by Felix Fietkau, based on uClibc Buildroot
+    <p>Usage and documentation by Felix Fietkau and Waldemar Brodkorb, based on uClibc Buildroot

     documentation by Thomas Petazzoni. Contributions from Karsten Kruse,
     Ned Ludd, Martin Herren.</p>
 
     documentation by Thomas Petazzoni. Contributions from Karsten Kruse,
     Ned Ludd, Martin Herren.</p>
 


@@ -80,17 +80,18 @@
     <code>gcc</code>, <code>binutils</code>, uClibc and all the tools by hand.
     Of course, doing so is possible. But dealing with all configure options,
     with all problems of every <code>gcc</code> or <code>binutils</code>
     <code>gcc</code>, <code>binutils</code>, uClibc and all the tools by hand.
     Of course, doing so is possible. But dealing with all configure options,
     with all problems of every <code>gcc</code> or <code>binutils</code>

-    version it very time-consuming and uninteresting. OpenWrt Buildroot automates this
+    version is very time-consuming and uninteresting. OpenWrt Buildroot automates this

     process through the use of Makefiles, and has a collection of patches for
     each <code>gcc</code> and <code>binutils</code> version to make them work
     process through the use of Makefiles, and has a collection of patches for
     each <code>gcc</code> and <code>binutils</code> version to make them work

-    on the MIPS architecture of most Broadcom based Wireless Routers.</p>
+    on the MIPS architecture of most Wireless Routers.</p>

 
     <h2><a name="download" id="download"></a>Obtaining OpenWrt Buildroot</h2>
 
 
     <h2><a name="download" id="download"></a>Obtaining OpenWrt Buildroot</h2>
 

-    <p>OpenWrt Buildroot is currently available as experimental snapshots</p>
-
-    <p>The latest snapshot is always available at <a
-    href="http://openwrt.org/downloads/experimental/">http://openwrt.org/downloads/experimental/</a>,
+    <p>OpenWrt Buildroot is available via CVS - Concurrent Version System.
+    For any kind of development you should get the latest version from cvs via:</p>
+<pre>
+ $ cvs -d:pserver:anonymous@openwrt.org:/openwrt co openwrt
+</pre>

 
     <h2><a name="using" id="using"></a>Using OpenWrt Buildroot</h2>
 
 
     <h2><a name="using" id="using"></a>Using OpenWrt Buildroot</h2>
 


@@ -128,8 +129,8 @@
         <li>squashfs</li>
     </ul>
     <p><code>jffs2</code> contains a writable root filesystem, which will expand to
         <li>squashfs</li>
     </ul>
     <p><code>jffs2</code> contains a writable root filesystem, which will expand to

-    the size of your flash image. Note that you if you use the generic firmware
-    Image, you need to pick the right image for your Flash size, because of different
+    the size of your flash image. Note: if you use the generic firmware image, you 
+    need to pick the right image for your flash size, because of different

     eraseblock sizes.</p>
     
     <p><code>squashfs</code> contains a read-only root filesystem using a modified 
     eraseblock sizes.</p>
     
     <p><code>squashfs</code> contains a read-only root filesystem using a modified 


@@ -196,7 +197,7 @@
       configuration, and the latter is used if you have selected
       locale support.</li>
 
       configuration, and the latter is used if you have selected
       locale support.</li>
 

-      <li>Run the compilation again</li>
+      <li>Run the compilation again.</li>

 
     </ol>
 
 
     </ol>
 


@@ -231,11 +232,13 @@
 
       <li><b>target</b> (in the <code>target</code> directory) contains the
       Makefiles and associated files for software related to the generation of
 
       <li><b>target</b> (in the <code>target</code> directory) contains the
       Makefiles and associated files for software related to the generation of

-      the target root filesystem image. Four types of filesystems are supported
+      the target root filesystem image and the linux kernel for the different 
+      system on a chip boards, used in the Wireless Routers. 
+      Two types of filesystems are supported

       : jffs2 and squashfs. 
     </ul>
 
       : jffs2 and squashfs. 
     </ul>
 

-    <p>Each directory contains at least 3 files :</p>
+    <p>Each directory contains at least 2 files :</p>

 
     <ul>
       <li><code>Makefile</code> is the Makefile that downloads, configures,
 
     <ul>
       <li><code>Makefile</code> is the Makefile that downloads, configures,


@@ -264,18 +267,18 @@
       is your architecture). This is where the cross compilation toolchain will
       be compiled.</li>
 
       is your architecture). This is where the cross compilation toolchain will
       be compiled.</li>
 

-      <li>Setup the staging directory (<code>build_ARCH/staging_dir/</code> by
+      <li>Setup the staging directory (<code>staging_dir_ARCH/</code> by

       default). This is where the cross-compilation toolchain will be
       installed. If you want to use the same cross-compilation toolchain for
       other purposes, such as compiling third-party applications, you can add
       default). This is where the cross-compilation toolchain will be
       installed. If you want to use the same cross-compilation toolchain for
       other purposes, such as compiling third-party applications, you can add

-      <code>build_ARCH/staging_dir/bin</code> to your PATH, and then use
+      <code>staging_dir_ARCH/bin</code> to your PATH, and then use

       <code>arch-linux-gcc</code> to compile your application. In order to
       setup this staging directory, it first removes it, and then it creates
       various subdirectories and symlinks inside it.</li>
 
       <li>Create the target directory (<code>build_ARCH/root/</code> by
       default) and the target filesystem skeleton. This directory will contain
       <code>arch-linux-gcc</code> to compile your application. In order to
       setup this staging directory, it first removes it, and then it creates
       various subdirectories and symlinks inside it.</li>
 
       <li>Create the target directory (<code>build_ARCH/root/</code> by
       default) and the target filesystem skeleton. This directory will contain

-      the final root filesystem. To setup it up, it first deletes it, then it
+      the final root filesystem. To set it up, it first deletes it, then it

       copies the skeleton available in  <code>target/default/target_skeleton</code>
       and then removes useless <code>CVS/</code> directories.</li>
 
       copies the skeleton available in  <code>target/default/target_skeleton</code>
       and then removes useless <code>CVS/</code> directories.</li>
 


@@ -292,25 +295,25 @@
     use the toolchain that was generated by the Buildroot.</p>
 
     <p>The toolchain generated by the Buildroot by default is located in
     use the toolchain that was generated by the Buildroot.</p>
 
     <p>The toolchain generated by the Buildroot by default is located in

-    <code>build_ARCH/staging_dir/</code>. The simplest way to use it
-    is to add <code>build_ARCH/staging_dir/bin/</code> to your PATH
-    environnement variable, and then to use
+    <code>staging_dir_ARCH</code>. The simplest way to use it
+    is to add <code>staging_dir_ARCH/bin/</code> to your PATH
+    environment variable, and then to use

     <code>arch-linux-gcc</code>, <code>arch-linux-objdump</code>,
     <code>arch-linux-ld</code>, etc.</p>
 
     <p>For example, you may add the following to your
     <code>.bashrc</code> (considering you're building for the MIPS
     architecture and that Buildroot is located in
     <code>arch-linux-gcc</code>, <code>arch-linux-objdump</code>,
     <code>arch-linux-ld</code>, etc.</p>
 
     <p>For example, you may add the following to your
     <code>.bashrc</code> (considering you're building for the MIPS
     architecture and that Buildroot is located in

-    <code>~/buildroot/</code>) :</p>
+    <code>~/openwrt/</code>) :</p>

 
 <pre>
 
 <pre>

-export PATH=$PATH:~/buildroot/build_mips/bin/
+export PATH=$PATH:~/openwrt/staging_dir_mipsel/bin/

 </pre>
 
     <p>Then you can simply do :</p>
 
 <pre>
 </pre>
 
     <p>Then you can simply do :</p>
 
 <pre>

-mips-linux-gcc -o foo foo.c
+mipsel-linux-uclibc-gcc -o foo foo.c

 </pre>
 
     <p><b>Important</b> : do not try to move the toolchain to an other
 </pre>
 
     <p><b>Important</b> : do not try to move the toolchain to an other


@@ -324,9 +327,9 @@ mips-linux-gcc -o foo foo.c
     uClibc toolchain outside of buildroot</h2>
 
     <p>By default, the cross-compilation toolchain is generated inside
     uClibc toolchain outside of buildroot</h2>
 
     <p>By default, the cross-compilation toolchain is generated inside

-    <code>build_ARCH/staging_dir/</code>. But sometimes, it may be useful to
+    <code>staging_dir_ARCH/</code>. But sometimes, it may be useful to

     install it somewhere else, so that it can be used to compile other programs
     install it somewhere else, so that it can be used to compile other programs

-    or by other users. Moving the <code>build_ARCH/staging_dir/</code>
+    or by other users. Moving the <code>staging_dir_ARCH/</code>

     directory elsewhere is <b>not possible</b>, because they are some hardcoded
     paths in the toolchain configuration.</p>
 
     directory elsewhere is <b>not possible</b>, because they are some hardcoded
     paths in the toolchain configuration.</p>
 


@@ -334,7 +337,7 @@ mips-linux-gcc -o foo foo.c
     you can configure Buildroot to generate it elsewhere using the
     option of the configuration tool : <code>Build options -&gt;
     Toolchain and header file location</code>, which defaults to
     you can configure Buildroot to generate it elsewhere using the
     option of the configuration tool : <code>Build options -&gt;
     Toolchain and header file location</code>, which defaults to

-    <code>$(BUILD_DIR)/staging_dir/</code>.</p>
+    <code>staging_dir_ARCH/</code>.</p>

 
     <h2><a name="downloaded_packages"
     id="downloaded_packages"></a>Location of downloaded packages</h2>
 
     <h2><a name="downloaded_packages"
     id="downloaded_packages"></a>Location of downloaded packages</h2>


@@ -343,7 +346,7 @@ mips-linux-gcc -o foo foo.c
     downloaded by the <i>Makefiles</i> are all stored in the
     <code>DL_DIR</code> which by default is the <code>dl</code>
     directory. It's useful for example if you want to keep a complete
     downloaded by the <i>Makefiles</i> are all stored in the
     <code>DL_DIR</code> which by default is the <code>dl</code>
     directory. It's useful for example if you want to keep a complete

-    version of Buildroot which is know to be working with the
+    version of Buildroot which is known to be working with the

     associated tarballs. This will allow you to regenerate the
     toolchain and the target filesystem with exactly the same
     versions.</p>
     associated tarballs. This will allow you to regenerate the
     toolchain and the target filesystem with exactly the same
     versions.</p>


@@ -368,15 +371,39 @@ mips-linux-gcc -o foo foo.c
 
 <pre>
 config BR2_PACKAGE_FOO
 
 <pre>
 config BR2_PACKAGE_FOO

-        tristate "foo"
-        default n
+        tristate "foo - some nice tool"
+        default m if CONFIG_DEVEL

         help
             This is a comment that explains what foo is.
 </pre>
 
         help
             This is a comment that explains what foo is.
 </pre>
 

+    <p>If you depend on other software or library inside the Buildroot, it
+    is important that you automatically select these packages in your 
+    <code>Config.in</code>. Example if foo depends on bar library:
+    </p>
+<pre>
+config BR2_PACKAGE_FOO
+        tristate "foo - some nice tool"
+        default m if CONFIG_DEVEL
+       select BR2_PACKAGE_LIBBAR
+        help
+        This is a comment that explains what foo is.
+</pre>
+

     <p>Of course, you can add other options to configure particular
     things in your software.</p>
 
     <p>Of course, you can add other options to configure particular
     things in your software.</p>
 

+    <h3><code>Config.in</code> in the package directory</h3>
+       
+    <p>To add your package to the configuration tool, you need
+    to add the following line to <code>package/Config.in</code>,
+    please add it to a section, which fits the purpose of foo:
+
+<pre>
+comment "Networking"
+source "package/foo/Config.in"
+</pre>
+

     <h3><code>Makefile</code> in the package directory</h3>
 
     <p>To add your package to the build process, you need to edit
     <h3><code>Makefile</code> in the package directory</h3>
 
     <p>To add your package to the build process, you need to edit


@@ -390,18 +417,18 @@ package-$(BR2_PACKAGE_FOO) += foo
    <p>As you can see, this short line simply adds the target 
    <code>foo</code> to the list of targets handled by OpenWrt Buildroot.</p>
 
    <p>As you can see, this short line simply adds the target 
    <code>foo</code> to the list of targets handled by OpenWrt Buildroot.</p>
 

-
-    <p>In addition to the default dependencies, you make your package
-    depend on another package (e.g. a library) by adding a line:
+   <p>In addition to the default dependencies, you make your package
+   depend on another package (e.g. a library) by adding a line:

     
 <pre>
 foo-compile: bar-compile
 </pre>
 
     
 <pre>
 foo-compile: bar-compile
 </pre>
 

-   <h3>The <i>.control</i> file</h3>
+   <h3>The ipkg control file</h3>

    <p>Additionally, you need to create a control file which contains
    information about your package, readable by the <i>ipkg</i> package
    <p>Additionally, you need to create a control file which contains
    information about your package, readable by the <i>ipkg</i> package

-   utility.</p>
+   utility. It should be created as file:
+   <code>package/foo/ipkg/foo.control</code></p>

    
    <p>The file looks like this</p>
 
    
    <p>The file looks like this</p>
 


@@ -411,81 +438,84 @@ foo-compile: bar-compile
      3  Section: net
      4  Maintainer: Foo Software &lt;foo@foosoftware.com&gt;
      5  Source: http://foosoftware.com
      3  Section: net
      4  Maintainer: Foo Software &lt;foo@foosoftware.com&gt;
      5  Source: http://foosoftware.com

-     6  Description: Your Package Description
+     6  Depends: libbar
+     7  Description: Package Description

 </pre>
    
    <p>You can skip the usual <code>Version:</code> and <code>Architecture</code>
    fields, as they will be generated by the <code>make-ipkg-dir.sh</code> script
 </pre>
    
    <p>You can skip the usual <code>Version:</code> and <code>Architecture</code>
    fields, as they will be generated by the <code>make-ipkg-dir.sh</code> script

-   called from your Makefile</p>
+   called from your Makefile. The Depends field is important, so that ipkg will
+   automatically fetch all dependend software on your target system.</p>

 
    <h3>The real <i>Makefile</i></h3>
 
    <p>Finally, here's the hardest part. Create a file named
    <code>Makefile</code>. It will contain the <i>Makefile</i> rules that
    are in charge of downloading, configuring, compiling and installing
 
    <h3>The real <i>Makefile</i></h3>
 
    <p>Finally, here's the hardest part. Create a file named
    <code>Makefile</code>. It will contain the <i>Makefile</i> rules that
    are in charge of downloading, configuring, compiling and installing

-   the software. Below is an example that we will comment
-   afterwards.</p>
+   the software. Below is an example that we will comment afterwards.</p>

 
 <pre>
 
 <pre>

-     1  #############################################################
-     2  # foo
-     3  #############################################################
-     4  PKG_NAME:=foo
-     5  PKG_VERSION:=1.0
-     6  PKG_RELEASE:=1
-     7  PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
-     8  PKG_SITE:=http://www.foosoftware.org/downloads
-     9  PKG_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-    10  PKG_IPK:=$(PACKAGE_DIR)/$(PKG_NAME)_$(PKG_VERSION)-$(PKG_RELEASE)_$(ARCH).ipk
-    11  PKG_IPK_DIR:=$(PKG_DIR)/ipkg
-    12
-    13  $(DL_DIR)/$(PKG_SOURCE):
-    14          $(WGET) -P $(DL_DIR) $(PKG_SITE)/$(PKG_SOURCE)
-    15
-    16  $(PKG_DIR)/.source: $(DL_DIR)/$(PKG_SOURCE)
-    17          zcat $(DL_DIR)/$(PKG_SOURCE) | tar -C $(BUILD_DIR) $(TAR_OPTIONS) -
-    18          touch $(PKG_DIR)/.source
-    19
-    20  $(PKG_DIR)/.configured: $(PKG_DIR)/.source
-    21          (cd $(PKG_DIR); \
-    22                  $(TARGET_CONFIGURE_OPTS) \
-    23                  CFLAGS="$(TARGET_CFLAGS)" \
-    24                  ./configure \
-    25                  --target=$(GNU_TARGET_NAME) \
-    26                  --host=$(GNU_TARGET_NAME) \
-    27                  --build=$(GNU_HOST_NAME) \
-    28                  --prefix=/usr \
-    29                  --sysconfdir=/etc \
-    30          );
-    31          touch $(PKG_DIR)/.configured;
-    32
-    33  $(PKG_DIR)/foo $(PKG_DIR)/.configured
-    34          $(MAKE) CC=$(TARGET_CC) -C $(PKG_DIR)
-    35
-    36  $(PKG_IPK): $(PKG_DIR)/$(PKG_BINARY)
-    37         $(SCRIPT_DIR)/make-ipkg-dir.sh $(PKG_IPK_DIR) $(PKG_NAME).control $(PKG_VERSION)-$(PKG_RELEASE) $(ARCH)
-    38          $(MAKE) prefix=$(PKG_IPK_DIR)/usr -C $(PKG_DIR) install
-    39          rm -Rf $(PKG_IPK_DIR)/usr/man
-    40         $(IPKG_BUILD) $(PKG_IPK_DIR) $(PACKAGE_DIR)
-    41
-    42  $(IPKG_STATE_DIR)/info/$(PKG_NAME).list: $(PKG_IPK)  
-    43         $(IPKG) install $(PKG_IPK) 
-    44  
-    45  prepare: $(PKG_DIR)/.source
-    46  compile: $(PKG_IPK)
-    47  install: $(IPKG_STATE_DIR)/info/$(PKG_NAME).list
-    48  clean:
-    49         rm -rf $(PKG_DIR)
-    50         rm -f $(PKG_IPK)
+     1  # $Id$
+     2 
+     3  include $(TOPDIR)/rules.mk
+     4
+     5  PKG_NAME:=foo
+     6  PKG_VERSION:=1.0
+     7  PKG_RELEASE:=1
+     8  PKG_MD5SUM:=4584f226523776a3cdd2fb6f8212ba8d
+     9 
+    10  PKG_SOURCE_URL:=http://www.foosoftware.org/downloads
+    11  PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
+    12         PKG_CAT:=zcat
+    13 
+    14 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+    15 PKG_INSTALL_DIR:=$(PKG_BUILD_DIR)/ipkg-install
+    16
+    17 include $(TOPDIR)/package/rules.mk
+    18
+    19 $(eval $(call PKG_template,FOO,foo,$(PKG_VERSION)-$(PKG_RELEASE),$(ARCH)))
+    20
+    21  $(PKG_BUILD_DIR)/.configured: $(PKG_BUILD_DIR)/.prepared
+    22          (cd $(PKG_BUILD_DIR); \
+    23                  $(TARGET_CONFIGURE_OPTS) \
+    24                  CFLAGS="$(TARGET_CFLAGS)" \
+    25                  ./configure \
+    26                  --target=$(GNU_TARGET_NAME) \
+    27                  --host=$(GNU_TARGET_NAME) \
+    28                  --build=$(GNU_HOST_NAME) \
+    29                  --prefix=/usr \
+    30                  --sysconfdir=/etc \
+    31                         --with-bar="$(STAGING_DIR)/usr" \
+    32          );
+    33          touch $@
+    34
+    35  $(PKG_BUILD_DIR)/.built:
+    36         rm -rf $(PKG_INSTALL_DIR)
+    37         mkdir -p $(PKG_INSTALL_DIR)
+    38         $(MAKE) -C $(PKG_BUILD_DIR) \
+    39                   $(TARGET_CONFIGURE_OPTS) \
+    40            install_prefix="$(PKG_INSTALL_DIR)" \
+    41                   all install
+    42         touch $@
+    43 
+    44  $(IPKG_FOO):
+    46         install -d -m0755 $(IDIR_FOO)/usr/sbin
+    47         cp -fpR $(PKG_INSTALL_DIR)/usr/sbin/foo $(IDIR_FOO)/usr/sbin
+    49         $(RSTRIP) $(IDIR_FOO)
+    50         $(IPKG_BUILD) $(IDIR_FOO) $(PACKAGE_DIR)
+    51 
+    52 mostlyclean:
+    53         make -C $(PKG_BUILD_DIR) clean
+    54         rm $(PKG_BUILD_DIR)/.built

 </pre>
 
     <p>First of all, this <i>Makefile</i> example works for a single
     binary software. For other software such as libraries or more
     complex stuff with multiple binaries, it should be adapted. Look at
 </pre>
 
     <p>First of all, this <i>Makefile</i> example works for a single
     binary software. For other software such as libraries or more
     complex stuff with multiple binaries, it should be adapted. Look at

-    the other <code>Makefile</code> files in the <code>package</code>
+    the other <code>Makefile</code> files in the <code>package/</code>

     directory.</p>
 
     directory.</p>
 

-    <p>At lines 4-11, a couple of useful variables are defined :</p>
+    <p>At lines 5-15, a couple of useful variables are defined:</p>

 
     <ul>
      <li><code>PKG_NAME</code> : The package name, e.g. <i>foo</i>.</li>
 
     <ul>
      <li><code>PKG_NAME</code> : The package name, e.g. <i>foo</i>.</li>


@@ -494,43 +524,42 @@ foo-compile: bar-compile
      should be downloaded.</li>
 
      <li><code>PKG_RELEASE</code> : The release number that will be
      should be downloaded.</li>
 
      <li><code>PKG_RELEASE</code> : The release number that will be

-     appended to the version number of your <i>ipkg</i> package.
+     appended to the version number of your <i>ipkg</i> package.</li>
+
+     <li><code>PKG_MD5SUM</code> : The md5sum of the software archive.</li>
+
+     <li><code>PKG_SOURCE_URL</code> : Space separated list of the HTTP
+     or FTP sites from which the archive is downloaded. It must include the complete
+     path to the directory where <code>FOO_SOURCE</code> can be
+     found.</li>

 
      <li><code>PKG_SOURCE</code> : The name of the tarball of
      your package on the download website of FTP site. As you can see
      <code>PKG_NAME</code> and <code>PKG_VERSION</code> are used.</li>
 
 
      <li><code>PKG_SOURCE</code> : The name of the tarball of
      your package on the download website of FTP site. As you can see
      <code>PKG_NAME</code> and <code>PKG_VERSION</code> are used.</li>
 

-     <li><code>PKG_SITE</code> : The HTTP or FTP site from which
-     the archive is downloaded. It must include the complete
-     path to the directory where <code>FOO_SOURCE</code> can be
-     found.</li>
+     <li><code>PKG_CAT</code> : The tool needed for extraction of the 
+       software archive.</li>

 
 

-     <li><code>PKG_DIR</code> : The directory into which the software
+     <li><code>PKG_BUILD_DIR</code> : The directory into which the software

      will be configured and compiled. Basically, it's a subdirectory
      will be configured and compiled. Basically, it's a subdirectory

-     of <code>BUILD_DIR</code> which is created upon decompression of
+     of <code>BUILD_DIR</code> which is created upon extraction of

      the tarball.</li>
 
      the tarball.</li>
 

-     <li><code>PKG_IPK</code> : The resulting <i>ipkg</i> pacakge
+     <li><code>PKG_INSTALL_DIR</code> : The directory into the software 
+     will be installed. It is a subdirectory of <code>PKG_BUILD_DIR</code>.</li>

 
     </ul>
 
 
     </ul>
 

-    <p>Lines 13-14 defines a target that downloads the tarball from
-    the remote site to the download directory
-    (<code>DL_DIR</code>).</p>
-
-    <p>Lines 16-18 defines a target and associated rules that
-    uncompress the downloaded tarball. As you can see, this target
-    depends on the tarball file, so that the previous target (line
-    13-14) is called before executing the rules of the current
-    target. Uncompressing is followed by <i>touching</i> a hidden file
-    to mark the software has having been uncompressed. This trick is
-    used everywhere in Buildroot <i>Makefile</i> to split steps
-    (download, uncompress, configure, compile, install) while still
-    having correct dependencies.</p>
-
-    <p>Lines 20-31 defines a target and associated rules that
+    <p>In Line 3 and 17 we include common variables and routines to simplify
+       the process of ipkg creation. It includes routines to download, verify
+        and extract the software package archives.</p>
+
+    <p>Line 19 contains the magic line which automatically creates the 
+       ipkg for us.</p>
+
+    <p>Lines 21-33 defines a target and associated rules that

     configures the software. It depends on the previous target (the
     configures the software. It depends on the previous target (the

-    hidden <code>.source</code> file) so that we are sure the software has
+    hidden <code>.prepared</code> file) so that we are sure the software has

     been uncompressed. In order to configure it, it basically runs the
     well-known <code>./configure</code>script. As we may be doing
     cross-compilation, <code>target</code>, <code>host</code> and
     been uncompressed. In order to configure it, it basically runs the
     well-known <code>./configure</code>script. As we may be doing
     cross-compilation, <code>target</code>, <code>host</code> and


@@ -540,41 +569,21 @@ foo-compile: bar-compile
     filesystem. Finally it creates a <code>.configured</code> file to
     mark the software as configured.</p>
 
     filesystem. Finally it creates a <code>.configured</code> file to
     mark the software as configured.</p>
 

-    <p>Lines 33-34 defines a target and a rule that compiles the
+    <p>Lines 35-42 defines a target and a rule that compiles the

     software. This target will create the binary file in the
     compilation directory, and depends on the software being already
     configured (hence the reference to the <code>.configured</code>
     software. This target will create the binary file in the
     compilation directory, and depends on the software being already
     configured (hence the reference to the <code>.configured</code>

-    file). It basically runs <code>make</code> inside the source
-    directory.</p>
-
-    <p>Lines 36-40 defines a target and associated rules that create
-    the <i>ipkg</i> package which can optionally be embedded into
-    the resulting firmware image. It depends on the binary file in 
-    the source directory, to make sure the software has been compiled.
-    It uses the make-ipkg-dir.sh script, which will create the ipkg
-    build directory for your package, copy your control file into 
-    that directory and add version and architecture information.
-    Then it calls the <code>install</code> target of the
-    software <code>Makefile</code> by passing a <code>prefix</code>
-    argument, so that the <code>Makefile</code> doesn't try to install
-    the software inside host <code>/usr</code> but inside target
-    <code>/usr</code>. After the installation, the
-    <code>/usr/man</code> directory inside the target filesystem is
-    removed to save space.
+    file). Afterwards it installs the resulting binary into the 
+    <code>PKG_INSTALL_DIR</code>. It basically runs 
+    <code>make install</code> inside the source directory.</p>
+
+    <p>Lines 44-50 defines a target and associated rules that create
+    the <i>ipkg</i> package, which can optionally be embedded into
+    the resulting firmware image. It manually installs all files you
+    want to integrate in your resulting ipkg. <code>RSTRIP</code> will
+    recursevily strip all binaries and libraries. 

     Finally <code>IPKG_BUILD</code> is called to create the package.</p>
 
     Finally <code>IPKG_BUILD</code> is called to create the package.</p>
 

-    <p>Line 42 and 43 define the installation target of your package,
-    which will embed the software into the target filesystem.</p>
-
-    <p>Lines 45-50 define the main targets that the Makefile in the
-    <code>package</code> dir calls.
-    <ul>
-      <li><code>prepare</code> : Download and unpack the source</li>
-      <li><code>compile</code> : Compile the source and create the package</li>
-      <li><code>install</code> : Embed the package into the target filesystem</li>
-      <li><code>clean</code> : Remove all the files created by the build process</li>
-    </ul></p>
-

     <h3>Conclusion</h3>
 
     <p>As you can see, adding a software to buildroot is simply a
     <h3>Conclusion</h3>
 
     <p>As you can see, adding a software to buildroot is simply a


@@ -583,12 +592,14 @@ foo-compile: bar-compile
     the software.</p>
 
     <p>If you package software that might be useful for other persons,
     the software.</p>
 
     <p>If you package software that might be useful for other persons,

-    don't forget to send a patch to OpenWrt developers !</p>
+    don't forget to send a patch to OpenWrt developers! 
+    Use the mail address: patches@openwrt.org   
+    </p>

 
      <h2><a name="links" id="links"></a>Resources</h2>
 
 
      <h2><a name="links" id="links"></a>Resources</h2>
 

-    <p>To learn more about OpenWrt Buildroot you can visit this
-    website: <a href="http://openwrt.org/">http://openwrt.org/</a></p>
+    <p>To learn more about OpenWrt you can visit this website: 
+     <a href="http://openwrt.org/">http://openwrt.org/</a></p>

 
   </div>
 </body>
 
   </div>
 </body>