move firstboot to preinit for now (until a better solution is implemented), required...

[openwrt.git] / openwrt / package / base-files / default / etc / init.d / S10boot

diff --git a/openwrt/package/base-files/default/etc/init.d/S10boot b/openwrt/package/base-files/default/etc/init.d/S10boot
index 66fece1..02fddee 100755 (executable)
--- a/openwrt/package/base-files/default/etc/init.d/S10boot
+++ b/openwrt/package/base-files/default/etc/init.d/S10boot
@@ -5,46 +5,24 @@
         echo "S" > /proc/jffs2_bbc
 }
 
+vconfig set_name_type VLAN_PLUS_VID_NO_PAD
+
+HOSTNAME=$(nvram get wan_hostname)
+HOSTNAME=${HOSTNAME%%.*}
+echo ${HOSTNAME:=OpenWrt}>/proc/sys/kernel/hostname
+
 mkdir -p /var/run
 mkdir -p /var/log
 touch /var/log/wtmp
 touch /var/log/lastlog
+[ "$FAILSAFE" = "true" ] && touch /tmp/.failsafe
 
-[ -x /usr/sbin/nvram ] && {
-  [ "$(nvram get il0macaddr)" = "00:90:4c:5f:00:2a" ] && {
-    # if default wifi mac, set two higher than the lan mac
-    nvram set il0macaddr=$(nvram get et0macaddr|
-    awk '{OFS=FS=":";for(x=7,y=2;--x;){$x=sprintf("%02x",(y+="0x"$x)%256);y/=256}print}')
-  }
-
-  # set up the vlan*ports variables for the asus wl-500g deluxe
-  # if they don't already exist 
-  [  "$(nvram get boardtype)" = "bcm95365r" \
-  -a "$(nvram get boardnum)" = "45" \
-  -a -z "$(nvram get vlan0ports)" \
-  -a -z "$(nvram get vlan1ports)" ] && {
-       nvram set vlan0ports="1 2 3 4 5*"
-       nvram set vlan1ports="0 5"
-  }
-}
+for iface in $(/sbin/ifconfig -a | awk '{print $1}' | grep eth); do
+       /usr/bin/env -i ACTION=add INTERFACE="$iface" /sbin/hotplug net
+done
 
 sed 's/^[^#]/insmod &/' /etc/modules /etc/modules.d/* 2>&-|ash
 
 ifconfig lo 127.0.0.1 up
 ifconfig eth0 promisc
 
-[ "$(uname -r|grep -c 2.6)" = "1" ] && [ -x /sbin/robocfg ] && {
-  robocfg switch disable vlans enable reset vlan 0 ports "0 1 2 3 5t" vlan 1 ports "4 5t" port 4 state enabled stp none switch enable
-  robocfg show
-}
-
-HOSTNAME=$(nvram get wan_hostname)
-HOSTNAME=${HOSTNAME%%.*}
-echo ${HOSTNAME:=OpenWrt}>/proc/sys/kernel/hostname
-
-vconfig set_name_type VLAN_PLUS_VID_NO_PAD
-
-# automagically run firstboot
-[ -z "$FAILSAFE" -a -z "$(nvram get no_root_swap)" ] && {
-       { mount|grep "on / type jffs2" 1>&-; } || firstboot
-}