-diff --git a/arch/mips/pci/fixup-bcm63xx.c b/arch/mips/pci/fixup-bcm63xx.c
-new file mode 100644
-index 0000000..3408630
---- /dev/null
-+++ b/arch/mips/pci/fixup-bcm63xx.c
-@@ -0,0 +1,21 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
-+ */
-+
-+#include <linux/types.h>
-+#include <linux/pci.h>
-+#include <bcm63xx_cpu.h>
-+
-+int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+ return bcm63xx_get_irq_number(IRQ_PCI);
-+}
-+
-+int pcibios_plat_dev_init(struct pci_dev *dev)
-+{
-+ return 0;
-+}
-diff --git a/arch/mips/pci/ops-bcm63xx.c b/arch/mips/pci/ops-bcm63xx.c
-new file mode 100644
-index 0000000..f8dce9d
---- /dev/null
-+++ b/arch/mips/pci/ops-bcm63xx.c
-@@ -0,0 +1,179 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
-+ */
-+
-+#include <linux/types.h>
-+#include <linux/pci.h>
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/delay.h>
-+#include <linux/io.h>
-+
-+#include "pci-bcm63xx.h"
-+
-+/*
-+ * swizzle 32bits data to return only the needed part
-+ */
-+static int postprocess_read(u32 data, int where, unsigned int size)
-+{
-+ u32 ret;
-+
-+ ret = 0;
-+ switch (size) {
-+ case 1:
-+ ret = (data >> ((where & 3) << 3)) & 0xff;
-+ break;
-+ case 2:
-+ ret = (data >> ((where & 3) << 3)) & 0xffff;
-+ break;
-+ case 4:
-+ ret = data;
-+ break;
-+ }
-+ return ret;
-+}
-+
-+static int preprocess_write(u32 orig_data, u32 val, int where,
-+ unsigned int size)
-+{
-+ u32 ret;
-+
-+ ret = 0;
-+ switch (size) {
-+ case 1:
-+ ret = (orig_data & ~(0xff << ((where & 3) << 3))) |
-+ (val << ((where & 3) << 3));
-+ break;
-+ case 2:
-+ ret = (orig_data & ~(0xffff << ((where & 3) << 3))) |
-+ (val << ((where & 3) << 3));
-+ break;
-+ case 4:
-+ ret = val;
-+ break;
-+ }
-+ return ret;
-+}
-+
-+/*
-+ * setup hardware for a configuration cycle with given parameters
-+ */
-+static int bcm63xx_setup_cfg_access(int type, unsigned int busn,
-+ unsigned int devfn, int where)
-+{
-+ unsigned int slot, func, reg;
-+ u32 val;
-+
-+ slot = PCI_SLOT(devfn);
-+ func = PCI_FUNC(devfn);
-+ reg = where >> 2;
-+
-+ /* sanity check */
-+ if (slot > (MPI_L2PCFG_DEVNUM_MASK >> MPI_L2PCFG_DEVNUM_SHIFT))
-+ return 1;
-+
-+ if (func > (MPI_L2PCFG_FUNC_MASK >> MPI_L2PCFG_FUNC_SHIFT))
-+ return 1;
-+
-+ if (reg > (MPI_L2PCFG_REG_MASK >> MPI_L2PCFG_REG_SHIFT))
-+ return 1;
-+
-+ /* ok, setup config access */
-+ val = (reg << MPI_L2PCFG_REG_SHIFT);
-+ val |= (func << MPI_L2PCFG_FUNC_SHIFT);
-+ val |= (slot << MPI_L2PCFG_DEVNUM_SHIFT);
-+ val |= MPI_L2PCFG_CFG_USEREG_MASK;
-+ val |= MPI_L2PCFG_CFG_SEL_MASK;
-+ /* type 0 cycle for local bus, type 1 cycle for anything else */
-+ if (type != 0) {
-+ /* FIXME: how to specify bus ??? */
-+ val |= (1 << MPI_L2PCFG_CFG_TYPE_SHIFT);
-+ }
-+ bcm_mpi_writel(val, MPI_L2PCFG_REG);
-+
-+ return 0;
-+}
-+
-+static int bcm63xx_do_cfg_read(int type, unsigned int busn,
-+ unsigned int devfn, int where, int size,
-+ u32 *val)
-+{
-+ u32 data;
-+
-+ /* two phase cycle, first we write address, then read data at
-+ * another location, caller already has a spinlock so no need
-+ * to add one here */
-+ if (bcm63xx_setup_cfg_access(type, busn, devfn, where))
-+ return PCIBIOS_DEVICE_NOT_FOUND;
-+ iob();
-+ data = le32_to_cpu(__raw_readl(pci_iospace_start));
-+ /* restore IO space normal behaviour */
-+ bcm_mpi_writel(0, MPI_L2PCFG_REG);
-+
-+ *val = postprocess_read(data, where, size);
-+
-+ return PCIBIOS_SUCCESSFUL;
-+}
-+
-+static int bcm63xx_do_cfg_write(int type, unsigned int busn,
-+ unsigned int devfn, int where, int size,
-+ u32 val)
-+{
-+ u32 data;
-+
-+ /* two phase cycle, first we write address, then write data to
-+ * another location, caller already has a spinlock so no need
-+ * to add one here */
-+ if (bcm63xx_setup_cfg_access(type, busn, devfn, where))
-+ return PCIBIOS_DEVICE_NOT_FOUND;
-+ iob();
-+
-+ data = le32_to_cpu(__raw_readl(pci_iospace_start));
-+ data = preprocess_write(data, val, where, size);
-+
-+ __raw_writel(cpu_to_le32(data), pci_iospace_start);
-+ wmb();
-+ /* no way to know the access is done, we have to wait */
-+ udelay(500);
-+ /* restore IO space normal behaviour */
-+ bcm_mpi_writel(0, MPI_L2PCFG_REG);
-+
-+ return PCIBIOS_SUCCESSFUL;
-+}
-+
-+static int bcm63xx_pci_read(struct pci_bus *bus, unsigned int devfn,
-+ int where, int size, u32 *val)
-+{
-+ int type;
-+
-+ type = bus->parent ? 1 : 0;
-+
-+ if (type == 0 && PCI_SLOT(devfn) == CARDBUS_PCI_IDSEL)
-+ return PCIBIOS_DEVICE_NOT_FOUND;
-+
-+ return bcm63xx_do_cfg_read(type, bus->number, devfn,
-+ where, size, val);
-+}
-+
-+static int bcm63xx_pci_write(struct pci_bus *bus, unsigned int devfn,
-+ int where, int size, u32 val)
-+{
-+ int type;
-+
-+ type = bus->parent ? 1 : 0;
-+
-+ if (type == 0 && PCI_SLOT(devfn) == CARDBUS_PCI_IDSEL)
-+ return PCIBIOS_DEVICE_NOT_FOUND;
-+
-+ return bcm63xx_do_cfg_write(type, bus->number, devfn,
-+ where, size, val);
-+}
-+
-+struct pci_ops bcm63xx_pci_ops = {
-+ .read = bcm63xx_pci_read,
-+ .write = bcm63xx_pci_write
-+};
-diff --git a/arch/mips/pci/pci-bcm63xx.c b/arch/mips/pci/pci-bcm63xx.c
-new file mode 100644
-index 0000000..52bac8e
---- /dev/null
-+++ b/arch/mips/pci/pci-bcm63xx.c
-@@ -0,0 +1,178 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
-+ */
-+
-+#include <linux/types.h>
-+#include <linux/pci.h>
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <asm/bootinfo.h>
-+
-+#include "pci-bcm63xx.h"
-+
-+/* allow PCI to be disabled at runtime depending on board nvram
-+ * configuration */
-+int bcm63xx_pci_enabled = 0;
-+
-+static struct resource bcm_pci_mem_resource = {
-+ .name = "bcm63xx PCI memory space",
-+ .start = BCM_PCI_MEM_BASE_PA,
-+ .end = BCM_PCI_MEM_END_PA,
-+ .flags = IORESOURCE_MEM
-+};
-+
-+static struct resource bcm_pci_io_resource = {
-+ .name = "bcm63xx PCI IO space",
-+ .start = BCM_PCI_IO_BASE_PA,
-+ .end = BCM_PCI_IO_END_PA,
-+ .flags = IORESOURCE_IO
-+};
-+
-+struct pci_controller bcm63xx_controller = {
-+ .pci_ops = &bcm63xx_pci_ops,
-+ .io_resource = &bcm_pci_io_resource,
-+ .mem_resource = &bcm_pci_mem_resource,
-+};
-+
-+static u32 bcm63xx_int_cfg_readl(u32 reg)
-+{
-+ u32 tmp;
-+
-+ tmp = reg & MPI_PCICFGCTL_CFGADDR_MASK;
-+ tmp |= MPI_PCICFGCTL_WRITEEN_MASK;
-+ bcm_mpi_writel(tmp, MPI_PCICFGCTL_REG);
-+ iob();
-+ return bcm_mpi_readl(MPI_PCICFGDATA_REG);
-+}
-+
-+static void bcm63xx_int_cfg_writel(u32 val, u32 reg)
-+{
-+ u32 tmp;
-+
-+ tmp = reg & MPI_PCICFGCTL_CFGADDR_MASK;
-+ tmp |= MPI_PCICFGCTL_WRITEEN_MASK;
-+ bcm_mpi_writel(tmp, MPI_PCICFGCTL_REG);
-+ bcm_mpi_writel(val, MPI_PCICFGDATA_REG);
-+}
-+
-+void __iomem *pci_iospace_start;
-+
-+static int __init bcm63xx_pci_init(void)
-+{
-+ unsigned int mem_size;
-+ u32 val;
-+
-+ if (!BCMCPU_IS_6348() && !BCMCPU_IS_6358())
-+ return -ENODEV;
-+
-+ if (!bcm63xx_pci_enabled)
-+ return -ENODEV;
-+
-+ /*
-+ * configuration access are done through IO space, remap 4
-+ * first bytes to access it from CPU.
-+ *
-+ * this means that no io access from CPU should happen while
-+ * we do a configuration cycle, but there's no way we can add
-+ * a spinlock for each io access, so this is currently kind of
-+ * broken on SMP.
-+ */
-+ pci_iospace_start = ioremap_nocache(BCM_PCI_IO_BASE_PA, 4);
-+ if (!pci_iospace_start)
-+ return -ENOMEM;
-+
-+ /* setup local bus to PCI access (PCI memory) */
-+ val = BCM_PCI_MEM_BASE_PA & MPI_L2P_BASE_MASK;
-+ bcm_mpi_writel(val, MPI_L2PMEMBASE1_REG);
-+ bcm_mpi_writel(~(BCM_PCI_MEM_SIZE - 1), MPI_L2PMEMRANGE1_REG);
-+ bcm_mpi_writel(val | MPI_L2PREMAP_ENABLED_MASK, MPI_L2PMEMREMAP1_REG);
-+
-+ /* set Cardbus IDSEL (type 0 cfg access on primary bus for
-+ * this IDSEL will be done on Cardbus instead) */
-+ val = bcm_pcmcia_readl(PCMCIA_C1_REG);
-+ val &= ~PCMCIA_C1_CBIDSEL_MASK;
-+ val |= (CARDBUS_PCI_IDSEL << PCMCIA_C1_CBIDSEL_SHIFT);
-+ bcm_pcmcia_writel(val, PCMCIA_C1_REG);
-+
-+ /* disable second access windows */
-+ bcm_mpi_writel(0, MPI_L2PMEMREMAP2_REG);
-+
-+ /* setup local bus to PCI access (IO memory), we have only 1
-+ * IO window for both PCI and cardbus, but it cannot handle
-+ * both at the same time, assume standard PCI for now, if
-+ * cardbus card has IO zone, PCI fixup will change window to
-+ * cardbus */
-+ val = BCM_PCI_IO_BASE_PA & MPI_L2P_BASE_MASK;
-+ bcm_mpi_writel(val, MPI_L2PIOBASE_REG);
-+ bcm_mpi_writel(~(BCM_PCI_IO_SIZE - 1), MPI_L2PIORANGE_REG);
-+ bcm_mpi_writel(val | MPI_L2PREMAP_ENABLED_MASK, MPI_L2PIOREMAP_REG);
-+
-+ /* enable PCI related GPIO pins */
-+ bcm_mpi_writel(MPI_LOCBUSCTL_EN_PCI_GPIO_MASK, MPI_LOCBUSCTL_REG);
-+
-+ /* setup PCI to local bus access, used by PCI device to target
-+ * local RAM while bus mastering */
-+ bcm63xx_int_cfg_writel(0, PCI_BASE_ADDRESS_3);
-+ if (BCMCPU_IS_6358())
-+ val = MPI_SP0_REMAP_ENABLE_MASK;
-+ else
-+ val = 0;
-+ bcm_mpi_writel(val, MPI_SP0_REMAP_REG);
-+
-+ bcm63xx_int_cfg_writel(0x0, PCI_BASE_ADDRESS_4);
-+ bcm_mpi_writel(0, MPI_SP1_REMAP_REG);
-+
-+ mem_size = bcm63xx_get_memory_size();
-+
-+ /* 6348 before rev b0 exposes only 16 MB of RAM memory through
-+ * PCI, throw a warning if we have more memory */
-+ if (BCMCPU_IS_6348() && (bcm63xx_get_cpu_rev() & 0xf0) == 0xa0) {
-+ if (mem_size > (16 * 1024 * 1024))
-+ printk(KERN_WARNING "bcm63xx: this CPU "
-+ "revision cannot handle more than 16MB "
-+ "of RAM for PCI bus mastering\n");
-+ } else {
-+ /* setup sp0 range to local RAM size */
-+ bcm_mpi_writel(~(mem_size - 1), MPI_SP0_RANGE_REG);
-+ bcm_mpi_writel(0, MPI_SP1_RANGE_REG);
-+ }
-+
-+ /* change host bridge retry counter to infinite number of
-+ * retry, needed for some broadcom wifi cards with Silicon
-+ * Backplane bus where access to srom seems very slow */
-+ val = bcm63xx_int_cfg_readl(BCMPCI_REG_TIMERS);
-+ val &= ~REG_TIMER_RETRY_MASK;
-+ bcm63xx_int_cfg_writel(val, BCMPCI_REG_TIMERS);
-+
-+ /* enable memory decoder and bus mastering */
-+ val = bcm63xx_int_cfg_readl(PCI_COMMAND);
-+ val |= (PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
-+ bcm63xx_int_cfg_writel(val, PCI_COMMAND);
-+
-+ /* enable read prefetching & disable byte swapping for bus
-+ * mastering transfers */
-+ val = bcm_mpi_readl(MPI_PCIMODESEL_REG);
-+ val &= ~MPI_PCIMODESEL_BAR1_NOSWAP_MASK;
-+ val &= ~MPI_PCIMODESEL_BAR2_NOSWAP_MASK;
-+ val &= ~MPI_PCIMODESEL_PREFETCH_MASK;
-+ val |= (8 << MPI_PCIMODESEL_PREFETCH_SHIFT);
-+ bcm_mpi_writel(val, MPI_PCIMODESEL_REG);
-+
-+ /* enable pci interrupt */
-+ val = bcm_mpi_readl(MPI_LOCINT_REG);
-+ val |= MPI_LOCINT_MASK(MPI_LOCINT_EXT_PCI_INT);
-+ bcm_mpi_writel(val, MPI_LOCINT_REG);
-+
-+ register_pci_controller(&bcm63xx_controller);
-+
-+ /* mark memory space used for IO mapping as reserved */
-+ request_mem_region(BCM_PCI_IO_BASE_PA, BCM_PCI_IO_SIZE,
-+ "bcm63xx PCI IO space");
-+ return 0;
-+}
-+
-+arch_initcall(bcm63xx_pci_init);
-diff --git a/arch/mips/pci/pci-bcm63xx.h b/arch/mips/pci/pci-bcm63xx.h
-new file mode 100644
-index 0000000..a6e594e
---- /dev/null
-+++ b/arch/mips/pci/pci-bcm63xx.h
-@@ -0,0 +1,27 @@
-+#ifndef PCI_BCM63XX_H_
-+#define PCI_BCM63XX_H_
-+
-+#include <bcm63xx_cpu.h>
-+#include <bcm63xx_io.h>
-+#include <bcm63xx_regs.h>
-+#include <bcm63xx_dev_pci.h>
-+
-+/*
-+ * Cardbus shares the PCI bus, but has no IDSEL, so a special id is
-+ * reserved for it. If you have a standard PCI device at this id, you
-+ * need to change the following definition.
-+ */
-+#define CARDBUS_PCI_IDSEL 0x8
-+
-+/*
-+ * defined in ops-bcm63xx.c
-+ */
-+extern struct pci_ops bcm63xx_pci_ops;
-+extern struct pci_ops bcm63xx_cb_ops;
-+
-+/*
-+ * defined in pci-bcm63xx.c
-+ */
-+extern void __iomem *pci_iospace_start;
-+
-+#endif /* ! PCI_BCM63XX_H_ */
-diff --git a/include/asm-mips/mach-bcm63xx/bcm63xx_dev_pci.h b/include/asm-mips/mach-bcm63xx/bcm63xx_dev_pci.h
-new file mode 100644
-index 0000000..c549344
---- /dev/null
-+++ b/include/asm-mips/mach-bcm63xx/bcm63xx_dev_pci.h
-@@ -0,0 +1,6 @@
-+#ifndef BCM63XX_DEV_PCI_H_
-+#define BCM63XX_DEV_PCI_H_
-+
-+extern int bcm63xx_pci_enabled;
-+
-+#endif /* BCM63XX_DEV_PCI_H_ */
---
-1.5.4.3
-
projects / openwrt.git / blobdiff