include $(INCLUDE_DIR)/kernel.mk
PKG_NAME:=madwifi
-PKG_VERSION:=0.9.2
+PKG_REV:=3053
+PKG_VERSION:=r$(PKG_REV)
+PKG_BRANCH:=madwifi-dfs
PKG_RELEASE:=1
-PKG_MD5SUM:=a75baacbe07085ddc5cb28e1fb43edbb
-PKG_SOURCE_URL:=@SF/$(PKG_NAME)
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2
-PKG_CAT:=bzcat
+PKG_SOURCE_PROTO:=svn
+PKG_SOURCE_VERSION:=$(PKG_REV)
+PKG_SOURCE_SUBDIR:=$(if $(PKG_BRANCH),$(PKG_BRANCH),madwifi)-$(PKG_VERSION)
+PKG_SOURCE_URL:=http://svn.madwifi.org/madwifi/$(if $(PKG_BRANCH),branches/$(PKG_BRANCH),trunk)
+PKG_SOURCE:=$(PKG_SOURCE_SUBDIR).tar.gz
-PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/$(PKG_BRANCH)-$(PKG_VERSION)
-RATE_CONTROL:=sample
+include $(INCLUDE_DIR)/package.mk
ifeq ($(ARCH),mips)
HAL_TARGET:=mips-be-elf
ifeq ($(ARCH),i386)
HAL_TARGET:=i386-elf
endif
+ifeq ($(ARCH),i686)
+ HAL_TARGET:=i386-elf
+endif
ifeq ($(ARCH),armeb)
HAL_TARGET:=xscale-be-elf
endif
+ifeq ($(ARCH),arm)
+ HAL_TARGET:=xscale-le-elf
+endif
ifeq ($(ARCH),powerpc)
HAL_TARGET:=powerpc-be-elf
endif
-BUS := PCI
-ifneq ($(CONFIG_LINUX_2_4_AR531X),)
- BUS := AHB
+ifneq ($(CONFIG_TARGET_atheros),)
+ BUS:=AHB
+ HAL_TARGET:=ap51
+else
+ ifneq ($(CONFIG_PCI_SUPPORT),)
+ BUS:=PCI
+ endif
endif
-ifneq ($(CONFIG_LINUX_2_6_ARUBA),)
- BUS := PCI AHB # no suitable HAL for AHB yet.
+
+# XXX: remove this check later when we have PCI support properly detected on all targets
+ifneq ($(CONFIG_TARGET_uml),)
+ BUS:=
endif
-BUS_MODULES:=
+RATE_CONTROL:=minstrel
+
+MADWIFI_FILES:= \
+ $(PKG_BUILD_DIR)/net80211/wlan.$(LINUX_KMOD_SUFFIX) \
+ $(PKG_BUILD_DIR)/net80211/wlan_scan_ap.$(LINUX_KMOD_SUFFIX) \
+ $(PKG_BUILD_DIR)/net80211/wlan_scan_sta.$(LINUX_KMOD_SUFFIX) \
+ $(PKG_BUILD_DIR)/ath_hal/ath_hal.$(LINUX_KMOD_SUFFIX) \
+ $(PKG_BUILD_DIR)/ath_rate/$(RATE_CONTROL)/ath_rate_$(RATE_CONTROL).$(LINUX_KMOD_SUFFIX) \
+ $(PKG_BUILD_DIR)/net80211/wlan_acl.$(LINUX_KMOD_SUFFIX) \
+ $(PKG_BUILD_DIR)/net80211/wlan_ccmp.$(LINUX_KMOD_SUFFIX) \
+ $(PKG_BUILD_DIR)/net80211/wlan_tkip.$(LINUX_KMOD_SUFFIX) \
+ $(PKG_BUILD_DIR)/net80211/wlan_wep.$(LINUX_KMOD_SUFFIX) \
+ $(PKG_BUILD_DIR)/net80211/wlan_xauth.$(LINUX_KMOD_SUFFIX) \
+
+MADWIFI_AUTOLOAD:= \
+ wlan \
+ wlan_scan_ap \
+ wlan_scan_sta \
+ ath_hal \
+ ath_rate_$(RATE_CONTROL) \
+ wlan_acl \
+ wlan_ccmp \
+ wlan_tkip \
+ wlan_wep \
+ wlan_xauth \
+
ifeq ($(findstring AHB,$(BUS)),AHB)
- BUS_MODULES+=$(PKG_BUILD_DIR)/ath/ath_ahb.$(LINUX_KMOD_SUFFIX)
+ MADWIFI_FILES+= $(PKG_BUILD_DIR)/ath/ath_ahb.$(LINUX_KMOD_SUFFIX)
+ MADWIFI_AUTOLOAD+= ath_ahb
endif
ifeq ($(findstring PCI,$(BUS)),PCI)
- BUS_MODULES+=$(PKG_BUILD_DIR)/ath/ath_pci.$(LINUX_KMOD_SUFFIX)
+ MADWIFI_FILES+= $(PKG_BUILD_DIR)/ath/ath_pci.$(LINUX_KMOD_SUFFIX)
+ MADWIFI_AUTOLOAD+= ath_pci
endif
-MADWIFI_MAKEOPTS= -C $(PKG_BUILD_DIR) \
- PATH="$(TARGET_PATH)" \
- ARCH="$(LINUX_KARCH)" \
- CROSS_COMPILE="$(TARGET_CROSS)" \
- TARGET="$(HAL_TARGET)" \
- TOOLPREFIX="$(KERNEL_CROSS)" \
- TOOLPATH="$(KERNEL_CROSS)" \
- KERNELPATH="$(LINUX_DIR)" \
- LDOPTS=" " \
- ATH_RATE="ath_rate/$(RATE_CONTROL)" \
- DOMULTI=1
+define KernelPackage/madwifi
+ SUBMENU:=Wireless Drivers
+ TITLE:=Driver for Atheros wireless chipsets
+ URL:=http://madwifi.org/
+ DEPENDS:=+wireless-tools @PCI_SUPPORT||TARGET_atheros @!TARGET_avr32 @!TARGET_etrax @!TARGET_uml
+ FILES:=$(MADWIFI_FILES)
+ AUTOLOAD:=$(call AutoLoad,50,$(MADWIFI_AUTOLOAD))
+endef
-include $(INCLUDE_DIR)/package.mk
+define KernelPackage/madwifi/description
+ This package contains a driver for Atheros 802.11a/b/g chipsets.
+endef
+
+MAKE_ARGS:= \
+ PATH="$(TARGET_PATH)" \
+ ARCH="$(LINUX_KARCH)" \
+ CROSS_COMPILE="$(TARGET_CROSS)" \
+ TARGET="$(HAL_TARGET)" \
+ TOOLPREFIX="$(KERNEL_CROSS)" \
+ TOOLPATH="$(KERNEL_CROSS)" \
+ KERNELPATH="$(LINUX_DIR)" \
+ LDOPTS="--no-warn-mismatch " \
+ ATH_RATE="ath_rate/$(RATE_CONTROL)" \
+ WARNINGS="" \
+ DOMULTI=1
+
+MAKE_VARS:= \
+ COPTS="-DCONFIG_ATHEROS_RATE_DEFAULT='\"$(RATE_CONTROL)\"'" \
ifeq ($(findstring AHB,$(BUS)),AHB)
-define Build/Compile/ahb
- $(MAKE) $(MADWIFI_MAKEOPTS) BUS="AHB" all
-endef
+ define Build/Compile/ahb
+ $(MAKE_VARS) $(MAKE) -C $(PKG_BUILD_DIR) $(MAKE_ARGS) BUS="AHB" modules
+ $(MAKE) -C $(PKG_BUILD_DIR) $(MAKE_ARGS) CFLAGS="$(TARGET_CFLAGS)" tools
+ endef
endif
ifeq ($(findstring PCI,$(BUS)),PCI)
-define Build/Compile/pci
- $(MAKE) $(MADWIFI_MAKEOPTS) BUS="PCI" all
-endef
+ define Build/Compile/pci
+ $(MAKE_VARS) $(MAKE) -C $(PKG_BUILD_DIR) $(MAKE_ARGS) BUS="PCI" modules
+ $(MAKE) -C $(PKG_BUILD_DIR) $(MAKE_ARGS) CFLAGS="$(TARGET_CFLAGS)" tools
+ endef
endif
-define Build/Compile
-$(call Build/Compile/ahb)
-$(call Build/Compile/pci)
-endef
-
-define Build/InstallDev
- mkdir -p $(STAGING_DIR)/usr/include/madwifi
- $(CP) $(PKG_BUILD_DIR)/include $(STAGING_DIR)/usr/include/madwifi/
- mkdir -p $(STAGING_DIR)/usr/include/madwifi/net80211
- $(CP) $(PKG_BUILD_DIR)/net80211/*.h $(STAGING_DIR)/usr/include/madwifi/net80211/
+define Build/Configure
+ $(SED) 's,-E[LB] ,,g' $(PKG_BUILD_DIR)/hal/public/*.inc
endef
-define Build/UninstallDev
- rm -rf $(STAGING_DIR)/usr/include/madwifi
+define Build/Compile
+ $(call Build/Compile/ahb)
+ $(call Build/Compile/pci)
endef
-define Package/kmod-madwifi
- SECTION:=drivers
- CATEGORY:=Drivers
- DEFAULT:=y if LINUX_2_6_BRCM || LINUX_2_6_ARUBA || LINUX_2_4_AR531X || LINUX_2_6_XSCALE, m if ALL
- TITLE:=Driver for Atheros wireless chipsets
- DESCRIPTION:=Driver for Atheros 802.11a/b/g chipsets
- URL:=http://madwifi.org/
- VERSION:=$(LINUX_VERSION)+$(PKG_VERSION)-$(BOARD)-$(PKG_RELEASE)
+define Build/InstallDev
+ mkdir -p $(1)/usr/include/madwifi
+ $(CP) $(PKG_BUILD_DIR)/include $(1)/usr/include/madwifi/
+ mkdir -p $(1)/usr/include/madwifi/net80211
+ $(CP) $(PKG_BUILD_DIR)/net80211/*.h $(1)/usr/include/madwifi/net80211/
endef
-define Package/kmod-madwifi/install
- mkdir -p $(1)/etc/modules.d
- mkdir -p $(1)/etc/init.d
- mkdir -p $(1)/lib/modules/$(LINUX_VERSION)
- mkdir -p $(1)/usr/sbin
- install -m0644 ./files/madwifi.modules $(1)/etc/modules.d/20-madwifi
- echo ath_rate_$(RATE_CONTROL) >> $(1)/etc/modules.d/20-madwifi
-ifeq ($(findstring AHB,$(BUS)),AHB)
- echo ath_ahb >> $(1)/etc/modules.d/20-madwifi
-endif
-ifeq ($(findstring PCI,$(BUS)),PCI)
- echo ath_pci >> $(1)/etc/modules.d/20-madwifi
-endif
- install -m0755 ./files/madwifi.init $(1)/etc/init.d/S20madwifi
- $(CP) \
- $(PKG_BUILD_DIR)/ath/ath_hal.$(LINUX_KMOD_SUFFIX) \
- $(BUS_MODULES) \
- $(PKG_BUILD_DIR)/ath_rate/$(RATE_CONTROL)/ath_rate_$(RATE_CONTROL).$(LINUX_KMOD_SUFFIX) \
- $(PKG_BUILD_DIR)/net80211/wlan*.$(LINUX_KMOD_SUFFIX) \
- $(1)/lib/modules/$(LINUX_VERSION)/
- $(CP) $(PKG_BUILD_DIR)/tools/{madwifi_multi,80211debug,80211stats,athchans,athctrl,athdebug,athkey,athstats,wlanconfig} $(1)/usr/sbin/
+define KernelPackage/madwifi/install
+ $(INSTALL_DIR) $(1)/lib/wifi
+ $(INSTALL_DATA) ./files/lib/wifi/madwifi.sh $(1)/lib/wifi
+ $(INSTALL_DIR) $(1)/usr/sbin
+ $(CP) $(PKG_BUILD_DIR)/tools/{madwifi_multi,80211stats,athchans,athctrl,athkey,athstats,wlanconfig} $(1)/usr/sbin/
endef
-$(eval $(call BuildPackage,kmod-madwifi))
+$(eval $(call KernelPackage,madwifi))
projects / openwrt.git / blobdiff