ramips: use uncached address in detect_mem_size

[openwrt.git] / target / linux / ar71xx / patches-3.2 / 610-MIPS-ath79-openwrt-machines.patch

diff --git a/target/linux/ar71xx/patches-3.2/610-MIPS-ath79-openwrt-machines.patch b/target/linux/ar71xx/patches-3.2/610-MIPS-ath79-openwrt-machines.patch
index e6542a1..425b698 100644 (file)
--- a/target/linux/ar71xx/patches-3.2/610-MIPS-ath79-openwrt-machines.patch
+++ b/target/linux/ar71xx/patches-3.2/610-MIPS-ath79-openwrt-machines.patch
@@ -188,7 +188,7 @@
  config ATH79_MACH_PB44
        bool "Atheros PB44 reference board"
        select SOC_AR71XX
-@@ -54,6 +137,379 @@ config ATH79_MACH_PB44
+@@ -54,6 +137,369 @@ config ATH79_MACH_PB44
          Say 'Y' here if you want your kernel to support the
          Atheros PB44 reference board.
  
@@ -278,7 +278,7 @@
 +      select MYLOADER
 +
 +config ATH79_MACH_DIR_600_A1
-+      bool "D-Link DIR-600 rev. A1 support"
++      bool "D-Link DIR-600 A1/DIR-615 E4 support"
 +      select SOC_AR724X
 +      select ATH79_DEV_AP9X_PCI if PCI
 +      select ATH79_DEV_ETH
@@ -297,16 +297,6 @@
 +      select ATH79_DEV_WMAC
 +      select ATH79_NVRAM
 +
-+config ATH79_MACH_DIR_615_E4
-+      bool "D-Link DIR-615 rev. E4 support"
-+      select SOC_AR724X
-+      select ATH79_DEV_AP9X_PCI if PCI
-+      select ATH79_DEV_ETH
-+      select ATH79_DEV_GPIO_BUTTONS
-+      select ATH79_DEV_LEDS_GPIO
-+      select ATH79_DEV_M25P80
-+      select ATH79_NVRAM
-+
 +config ATH79_MACH_DIR_825_B1
 +      bool "D-Link DIR-825 rev. B1 board support"
 +      select SOC_AR71XX
@@ -568,7 +558,7 @@
  config ATH79_MACH_UBNT_XM
        bool "Ubiquiti Networks XM (rev 1.0) board"
        select SOC_AR724X
-@@ -67,6 +523,24 @@ config ATH79_MACH_UBNT_XM
+@@ -67,6 +513,24 @@ config ATH79_MACH_UBNT_XM
          Say 'Y' here if you want your kernel to support the
          Ubiquiti Networks XM (rev 1.0) board.
  
@@ -593,7 +583,7 @@
  endmenu
  
  config SOC_AR71XX
-@@ -96,10 +570,6 @@ config SOC_AR934X
+@@ -96,10 +560,6 @@ config SOC_AR934X
        select PCI_AR724X if PCI
        def_bool n
  
@@ -604,7 +594,7 @@
  config ATH79_DEV_AP9X_PCI
        select ATH79_PCI_ATH9K_FIXUP
        def_bool n
-@@ -110,7 +580,14 @@ config ATH79_DEV_DSA
+@@ -110,7 +570,14 @@ config ATH79_DEV_DSA
  config ATH79_DEV_ETH
        def_bool n
  
@@ -620,7 +610,7 @@
        def_bool n
  
  config ATH79_DEV_GPIO_BUTTONS
-@@ -135,4 +612,7 @@ config ATH79_NVRAM
+@@ -135,4 +602,7 @@ config ATH79_NVRAM
  config ATH79_PCI_ATH9K_FIXUP
        def_bool n
  
@@ -630,7 +620,7 @@
  endif
 --- a/arch/mips/ath79/Makefile
 +++ b/arch/mips/ath79/Makefile
-@@ -36,8 +36,57 @@ obj-$(CONFIG_ATH79_PCI_ATH9K_FIXUP) += p
+@@ -36,8 +36,56 @@ obj-$(CONFIG_ATH79_PCI_ATH9K_FIXUP) += p
  #
  # Machines
  #
@@ -646,7 +636,6 @@
  obj-$(CONFIG_ATH79_MACH_DB120)                += mach-db120.o
 +obj-$(CONFIG_ATH79_MACH_DIR_600_A1)   += mach-dir-600-a1.o
 +obj-$(CONFIG_ATH79_MACH_DIR_615_C1)   += mach-dir-615-c1.o
-+obj-$(CONFIG_ATH79_MACH_DIR_615_E4)     += mach-dir-615-e4.o
 +obj-$(CONFIG_ATH79_MACH_DIR_825_B1)   += mach-dir-825-b1.o
 +obj-$(CONFIG_ATH79_MACH_EAP7660D)     += mach-eap7660d.o
 +obj-$(CONFIG_ATH79_MACH_JA76PF)               += mach-ja76pf.o