menu "Networking Utilities"
+config BUSYBOX_CONFIG_NBDCLIENT
+ bool "nbd-client"
+ default n
+ help
+ Network block device client
+
+config BUSYBOX_CONFIG_NC
+ bool "nc"
+ default y
+ help
+ A simple Unix utility which reads and writes data across network
+ connections.
+
+config BUSYBOX_CONFIG_NC_SERVER
+ bool "Netcat server options (-l)"
+ default n
+ depends on BUSYBOX_CONFIG_NC
+ help
+ Allow netcat to act as a server.
+
+config BUSYBOX_CONFIG_NC_EXTRA
+ bool "Netcat extensions (-eiw and filename)"
+ default n
+ depends on BUSYBOX_CONFIG_NC
+ help
+ Add -e (support for executing the rest of the command line after
+ making or receiving a successful connection), -i (delay interval for
+ lines sent), -w (timeout for initial connection).
+
+config BUSYBOX_CONFIG_NC_110_COMPAT
+ bool "Netcat 1.10 compatibility (+2.5k)"
+ default n
+ depends on BUSYBOX_CONFIG_NC
+ help
+ This option makes nc closely follow original nc-1.10.
+ The code is about 2.5k bigger. It enables
+ -s ADDR, -n, -u, -v, -o FILE, -z options, but loses
+ busybox-specific extensions: -f FILE and -ll.
+
config BUSYBOX_CONFIG_FEATURE_IPV6
bool "Enable IPv6 support"
default y
help
- Enable IPv6 support to busybox. This makes applets that talk IP
- able to work with IPv6.
+ Enable IPv6 support in busybox.
+ This adds IPv6 support in the networking applets.
+
+config BUSYBOX_CONFIG_FEATURE_UNIX_LOCAL
+ bool "Enable Unix domain socket support (usually not needed)"
+ default n
+ help
+ Enable Unix domain socket support in all busybox networking
+ applets. Address of the form local:/path/to/unix/socket
+ will be recognized.
+
+ This extension is almost never used in real world usage.
+ You most likely want to say N.
+
+config BUSYBOX_CONFIG_FEATURE_PREFER_IPV4_ADDRESS
+ bool "Prefer IPv4 addresses from DNS queries"
+ default y
+ depends on BUSYBOX_CONFIG_FEATURE_IPV6
+ help
+ Use IPv4 address of network host if it has one.
+
+ If this option is off, the first returned address will be used.
+ This may cause problems when your DNS server is IPv6-capable and
+ is returning IPv6 host addresses too. If IPv6 address
+ precedes IPv4 one in DNS reply, busybox network applets
+ (e.g. wget) will use IPv6 address. On an IPv6-incapable host
+ or network applets will fail to connect to the host
+ using IPv6 address.
+
+config BUSYBOX_CONFIG_VERBOSE_RESOLUTION_ERRORS
+ bool "Verbose resolution errors"
+ default y
+ help
+ Enable if you are not satisfied with simplistic
+ "can't resolve 'hostname.com'" and want to know more.
+ This may increase size of your executable a bit.
+
+config BUSYBOX_CONFIG_ARP
+ bool "arp"
+ default n
+ depends on BUSYBOX_CONFIG_PLATFORM_LINUX
+ help
+ Manipulate the system ARP cache.
config BUSYBOX_CONFIG_ARPING
bool "arping"
default y
+ depends on BUSYBOX_CONFIG_PLATFORM_LINUX
+ help
+ Ping hosts by ARP packets.
+
+config BUSYBOX_CONFIG_BRCTL
+ bool "brctl"
+ default y
+ depends on BUSYBOX_CONFIG_PLATFORM_LINUX
+ help
+ Manage ethernet bridges.
+ Supports addbr/delbr and addif/delif.
+
+config BUSYBOX_CONFIG_FEATURE_BRCTL_FANCY
+ bool "Fancy options"
+ default y
+ depends on BUSYBOX_CONFIG_BRCTL
help
- Ping hosts by ARP packets
+ Add support for extended option like:
+ setageing, setfd, sethello, setmaxage,
+ setpathcost, setportprio, setbridgeprio,
+ stp
+ This adds about 600 bytes.
+
+config BUSYBOX_CONFIG_FEATURE_BRCTL_SHOW
+ bool "Support show"
+ default y
+ depends on BUSYBOX_CONFIG_BRCTL && BUSYBOX_CONFIG_FEATURE_BRCTL_FANCY
+ help
+ Add support for option which prints the current config:
+ show
config BUSYBOX_CONFIG_DNSD
bool "dnsd"
default n
help
- Small and static DNS server deamon.
+ Small and static DNS server daemon.
config BUSYBOX_CONFIG_ETHER_WAKE
bool "ether-wake"
default n
+ depends on BUSYBOX_CONFIG_PLATFORM_LINUX
help
Send a magic packet to wake up sleeping machines.
config BUSYBOX_CONFIG_FAKEIDENTD
bool "fakeidentd"
default n
+ select BUSYBOX_CONFIG_FEATURE_SYSLOG
help
- fakeidentd listens to the ident port and returns a set fake
- value whatever it gets.
+ fakeidentd listens on the ident port and returns a predefined
+ fake value on any query.
+
+config BUSYBOX_CONFIG_FTPD
+ bool "ftpd"
+ default n
+ help
+ simple FTP daemon. You have to run it via inetd.
+
+config BUSYBOX_CONFIG_FEATURE_FTP_WRITE
+ bool "Enable upload commands"
+ default n
+ depends on BUSYBOX_CONFIG_FTPD
+ help
+ Enable all kinds of FTP upload commands (-w option)
+
+config BUSYBOX_CONFIG_FEATURE_FTPD_ACCEPT_BROKEN_LIST
+ bool "Enable workaround for RFC-violating clients"
+ default n
+ depends on BUSYBOX_CONFIG_FTPD
+ help
+ Some ftp clients (among them KDE's Konqueror) issue illegal
+ "LIST -l" requests. This option works around such problems.
+ It might prevent you from listing files starting with "-" and
+ it increases the code size by ~40 bytes.
+ Most other ftp servers seem to behave similar to this.
config BUSYBOX_CONFIG_FTPGET
bool "ftpget"
help
Store a remote file via FTP.
+config BUSYBOX_CONFIG_FEATURE_FTPGETPUT_LONG_OPTIONS
+ bool "Enable long options in ftpget/ftpput"
+ default n
+ depends on BUSYBOX_CONFIG_LONG_OPTS && (BUSYBOX_CONFIG_FTPGET || BUSYBOX_CONFIG_FTPPUT)
+ help
+ Support long options for the ftpget/ftpput applet.
+
config BUSYBOX_CONFIG_HOSTNAME
bool "hostname"
default n
help
- Show or set the system's host name
+ Show or set the system's host name.
config BUSYBOX_CONFIG_HTTPD
bool "httpd"
- default y
+ default n
help
Serve web pages via an HTTP server.
-config BUSYBOX_CONFIG_FEATURE_HTTPD_USAGE_FROM_INETD_ONLY
- bool " Support using httpd only from inetd"
+config BUSYBOX_CONFIG_FEATURE_HTTPD_RANGES
+ bool "Support 'Ranges:' header"
default n
depends on BUSYBOX_CONFIG_HTTPD
help
- This option disables uid and port options for the httpd applet
- but requires inetd server daemon.
-
-config BUSYBOX_CONFIG_FEATURE_HTTPD_BASIC_AUTH
- bool " Enable Basic http Authentication"
- default y
- depends on BUSYBOX_CONFIG_HTTPD
- help
- Utilizes password settings from /etc/httpd.conf for basic
- authentication on a per url basis.
-
-config BUSYBOX_CONFIG_FEATURE_HTTPD_AUTH_MD5
- bool " Support MD5 crypted passwords for http Authentication"
- default y
- depends on BUSYBOX_CONFIG_FEATURE_HTTPD_BASIC_AUTH
- help
- Enables basic per url authentication from /etc/httpd.conf
- using md5 passwords.
+ Makes httpd emit "Accept-Ranges: bytes" header and understand
+ "Range: bytes=NNN-[MMM]" header. Allows for resuming interrupted
+ downloads, seeking in multimedia players etc.
-if !CONFIG_FEATURE_HTTPD_USAGE_FROM_INETD_ONLY
-config BUSYBOX_CONFIG_FEATURE_HTTPD_RELOAD_CONFIG_SIGHUP
- bool " Support reloading the global config file using hup signal"
- default y
+config BUSYBOX_CONFIG_FEATURE_HTTPD_USE_SENDFILE
+ bool "Use sendfile system call"
+ default n
depends on BUSYBOX_CONFIG_HTTPD
help
- This option enables processing of SIGHUP to reload cached
- configuration settings.
+ When enabled, httpd will use the kernel sendfile() function
+ instead of read/write loop.
config BUSYBOX_CONFIG_FEATURE_HTTPD_SETUID
- bool " Enable support -u <user> option"
+ bool "Enable -u <user> option"
default n
depends on BUSYBOX_CONFIG_HTTPD
help
rather than defaulting to the user that starts the server.
Use of this option requires special privileges to change to a
different user.
-endif
-config BUSYBOX_CONFIG_FEATURE_HTTPD_CONFIG_WITH_MIME_TYPES
- bool " Support loading additional MIME types at run-time"
- default y
+config BUSYBOX_CONFIG_FEATURE_HTTPD_BASIC_AUTH
+ bool "Enable Basic http Authentication"
+ default n
depends on BUSYBOX_CONFIG_HTTPD
help
- This option enables support for additional MIME types at
- run-time to be specified in the configuration file.
+ Utilizes password settings from /etc/httpd.conf for basic
+ authentication on a per url basis.
+
+config BUSYBOX_CONFIG_FEATURE_HTTPD_AUTH_MD5
+ bool "Support MD5 crypted passwords for http Authentication"
+ default n
+ depends on BUSYBOX_CONFIG_FEATURE_HTTPD_BASIC_AUTH
+ help
+ Enables basic per URL authentication from /etc/httpd.conf
+ using md5 passwords.
config BUSYBOX_CONFIG_FEATURE_HTTPD_CGI
- bool " Support Common Gateway Interface (CGI)"
- default y
+ bool "Support Common Gateway Interface (CGI)"
+ default n
depends on BUSYBOX_CONFIG_HTTPD
help
This option allows scripts and executables to be invoked
- when specific urls are requested.
+ when specific URLs are requested.
config BUSYBOX_CONFIG_FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR
- bool " Enable support for running scripts through an interpreter"
+ bool "Support for running scripts through an interpreter"
default n
depends on BUSYBOX_CONFIG_FEATURE_HTTPD_CGI
help
- This option enables support for running scripts through an
- interpreter. Turn this on, if you want PHP scripts to work
- properly. You need to supply an addition line in your httpd
+ This option enables support for running scripts through an
+ interpreter. Turn this on if you want PHP scripts to work
+ properly. You need to supply an additional line in your httpd
config file:
*.php:/path/to/your/php
config BUSYBOX_CONFIG_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV
- bool " Support the REMOTE_PORT environment variable for CGI"
- default y
+ bool "Set REMOTE_PORT environment variable for CGI"
+ default n
depends on BUSYBOX_CONFIG_FEATURE_HTTPD_CGI
help
Use of this option can assist scripts in generating
references that contain a unique port number.
config BUSYBOX_CONFIG_FEATURE_HTTPD_ENCODE_URL_STR
- bool " Enable the -e option for shell script CGI simplification."
- default y
+ bool "Enable -e option (useful for CGIs written as shell scripts)"
+ default n
depends on BUSYBOX_CONFIG_HTTPD
help
- After set, this option allows html encoding arbitrary
- strings for display of the browser. Output goes to stdout.
- For example, httpd -e "<Hello World>" as
+ This option allows html encoding of arbitrary strings for display
+ by the browser. Output goes to stdout.
+ For example, httpd -e "<Hello World>" produces
"<Hello World>".
+config BUSYBOX_CONFIG_FEATURE_HTTPD_ERROR_PAGES
+ bool "Support for custom error pages"
+ default n
+ depends on BUSYBOX_CONFIG_HTTPD
+ help
+ This option allows you to define custom error pages in
+ the configuration file instead of the default HTTP status
+ error pages. For instance, if you add the line:
+ E404:/path/e404.html
+ in the config file, the server will respond the specified
+ '/path/e404.html' file instead of the terse '404 NOT FOUND'
+ message.
+
+config BUSYBOX_CONFIG_FEATURE_HTTPD_PROXY
+ bool "Support for reverse proxy"
+ default n
+ depends on BUSYBOX_CONFIG_HTTPD
+ help
+ This option allows you to define URLs that will be forwarded
+ to another HTTP server. To setup add the following line to the
+ configuration file
+ P:/url/:http://hostname[:port]/new/path/
+ Then a request to /url/myfile will be forwarded to
+ http://hostname[:port]/new/path/myfile.
+
+config BUSYBOX_CONFIG_FEATURE_HTTPD_GZIP
+ bool "Support for GZIP content encoding"
+ default n
+ depends on BUSYBOX_CONFIG_HTTPD
+ help
+ Makes httpd send files using GZIP content encoding if the
+ client supports it and a pre-compressed <file>.gz exists.
+
config BUSYBOX_CONFIG_IFCONFIG
bool "ifconfig"
default y
+ depends on BUSYBOX_CONFIG_PLATFORM_LINUX
help
Ifconfig is used to configure the kernel-resident network interfaces.
config BUSYBOX_CONFIG_FEATURE_IFCONFIG_STATUS
- bool " Enable status reporting output (+7k)"
+ bool "Enable status reporting output (+7k)"
default y
depends on BUSYBOX_CONFIG_IFCONFIG
help
of the currently active interfaces.
config BUSYBOX_CONFIG_FEATURE_IFCONFIG_SLIP
- bool " Enable slip-specific options \"keepalive\" and \"outfill\""
+ bool "Enable slip-specific options \"keepalive\" and \"outfill\""
default n
depends on BUSYBOX_CONFIG_IFCONFIG
help
- Allow "keepalive" and "outfill" support for SLIP. If you're not
+ Allow "keepalive" and "outfill" support for SLIP. If you're not
planning on using serial lines, leave this unchecked.
config BUSYBOX_CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ
- bool " Enable options \"mem_start\", \"io_addr\", and \"irq\""
+ bool "Enable options \"mem_start\", \"io_addr\", and \"irq\""
default n
depends on BUSYBOX_CONFIG_IFCONFIG
help
and/or the interrupt line used by the specified device.
config BUSYBOX_CONFIG_FEATURE_IFCONFIG_HW
- bool " Enable option \"hw\" (ether only)"
+ bool "Enable option \"hw\" (ether only)"
default y
depends on BUSYBOX_CONFIG_IFCONFIG
help
Set the hardware address of this interface, if the device driver
- supports this operation. Currently, we only support the 'ether'
+ supports this operation. Currently, we only support the 'ether'
class.
config BUSYBOX_CONFIG_FEATURE_IFCONFIG_BROADCAST_PLUS
- bool " Set the broadcast automatically"
+ bool "Set the broadcast automatically"
default y
depends on BUSYBOX_CONFIG_IFCONFIG
help
Setting this will make ifconfig attempt to find the broadcast
automatically if the value '+' is used.
+config BUSYBOX_CONFIG_IFENSLAVE
+ bool "ifenslave"
+ default n
+ depends on BUSYBOX_CONFIG_PLATFORM_LINUX
+ help
+ Userspace application to bind several interfaces
+ to a logical interface (use with kernel bonding driver).
+
+config BUSYBOX_CONFIG_IFPLUGD
+ bool "ifplugd"
+ default n
+ depends on BUSYBOX_CONFIG_PLATFORM_LINUX
+ help
+ Network interface plug detection daemon.
+
config BUSYBOX_CONFIG_IFUPDOWN
bool "ifupdown"
default n
- select BUSYBOX_CONFIG_RUN_PARTS
help
- Activate or deactivate the specified interfaces. This applet makes
+ Activate or deactivate the specified interfaces. This applet makes
use of either "ifconfig" and "route" or the "ip" command to actually
- configure network interfaces. Therefore, you will probably also want
- to enable either BUSYBOX_CONFIG_IFCONFIG and BUSYBOX_CONFIG_ROUTE, or enable
- BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP and the various BUSYBOX_CONFIG_IP options. Of
+ configure network interfaces. Therefore, you will probably also want
+ to enable either IFCONFIG and ROUTE, or enable
+ FEATURE_IFUPDOWN_IP and the various IP options. Of
course you could use non-busybox versions of these programs, so
against my better judgement (since this will surely result in plenty
of support questions on the mailing list), I do not force you to
- enable these additional options. It is up to you to supply either
- "ifconfig" and "route" or the "ip" command, either via busybox or via
- standalone utilities.
+ enable these additional options. It is up to you to supply either
+ "ifconfig", "route" and "run-parts" or the "ip" command, either
+ via busybox or via standalone utilities.
+
+config BUSYBOX_CONFIG_IFUPDOWN_IFSTATE_PATH
+ string "Absolute path to ifstate file"
+ default n
+ depends on BUSYBOX_CONFIG_IFUPDOWN
+ help
+ ifupdown keeps state information in a file called ifstate.
+ Typically it is located in /var/run/ifstate, however
+ some distributions tend to put it in other places
+ (debian, for example, uses /etc/network/run/ifstate).
+ This config option defines location of ifstate.
config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP
- bool " Use ip applet"
+ bool "Use ip applet"
default n
depends on BUSYBOX_CONFIG_IFUPDOWN
help
than the default of using the older 'ifconfig' and 'route' utilities.
config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP_BUILTIN
- bool " Use busybox ip applet"
+ bool "Use busybox ip applet"
default n
- depends on BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP
+ depends on BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP && BUSYBOX_CONFIG_PLATFORM_LINUX
select BUSYBOX_CONFIG_IP
select BUSYBOX_CONFIG_FEATURE_IP_ADDRESS
select BUSYBOX_CONFIG_FEATURE_IP_LINK
help
Use the busybox iproute "ip" applet to implement "ifupdown".
- If leave this disabled, you must install the full-blown iproute2
+ If left disabled, you must install the full-blown iproute2
utility or the "ifup" and "ifdown" applets will not work.
-config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP_BUILTIN
- bool " Use busybox ifconfig and route applets"
+config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IFCONFIG_BUILTIN
+ bool "Use busybox ifconfig and route applets"
default n
- depends on BUSYBOX_CONFIG_IFUPDOWN && !CONFIG_FEATURE_IFUPDOWN_IP
+ depends on BUSYBOX_CONFIG_IFUPDOWN && !BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP
select BUSYBOX_CONFIG_IFCONFIG
select BUSYBOX_CONFIG_ROUTE
help
Use the busybox iproute "ifconfig" and "route" applets to
implement the "ifup" and "ifdown" utilities.
- If leave this disabled, you must install the full-blown ifconfig
+ If left disabled, you must install the full-blown ifconfig
and route utilities, or the "ifup" and "ifdown" applets will not
work.
config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IPV4
- bool " Enable support for IPv4"
+ bool "Support for IPv4"
default n
depends on BUSYBOX_CONFIG_IFUPDOWN
help
- If you want busybox to talk IPv4, leave this on.
+ If you want ifup/ifdown to talk IPv4, leave this on.
config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IPV6
- bool " Enable support for IPv6"
+ bool "Support for IPv6"
default n
- depends on BUSYBOX_CONFIG_IFUPDOWN
+ depends on BUSYBOX_CONFIG_IFUPDOWN && BUSYBOX_CONFIG_FEATURE_IPV6
help
If you need support for IPv6, turn this option on.
-config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IPX
- bool " Enable support for IPX"
- default n
- depends on BUSYBOX_CONFIG_IFUPDOWN
- help
- If this option is selected you can use busybox to work with IPX
- networks.
+### UNUSED
+###config FEATURE_IFUPDOWN_IPX
+### bool "Support for IPX"
+### default y
+### depends on IFUPDOWN
+### help
+### If this option is selected you can use busybox to work with IPX
+### networks.
config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_MAPPING
- bool " Enable mapping support"
+ bool "Enable mapping support"
default n
depends on BUSYBOX_CONFIG_IFUPDOWN
help
This enables support for the "mapping" stanza, unless you have
a weird network setup you don't need it.
+config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_EXTERNAL_DHCP
+ bool "Support for external dhcp clients"
+ default n
+ depends on BUSYBOX_CONFIG_IFUPDOWN
+ help
+ This enables support for the external dhcp clients. Clients are
+ tried in the following order: dhcpcd, dhclient, pump and udhcpc.
+ Otherwise, if udhcpc applet is enabled, it is used.
+ Otherwise, ifup/ifdown will have no support for DHCP.
+
config BUSYBOX_CONFIG_INETD
bool "inetd"
default n
+ select BUSYBOX_CONFIG_FEATURE_SYSLOG
help
Internet superserver daemon
-config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BILTIN_ECHO
- bool " Support echo service"
+config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_ECHO
+ bool "Support echo service"
default n
depends on BUSYBOX_CONFIG_INETD
help
Echo received data internal inetd service
-config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BILTIN_DISCARD
- bool " Support discard service"
+config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DISCARD
+ bool "Support discard service"
default n
depends on BUSYBOX_CONFIG_INETD
help
Internet /dev/null internal inetd service
-config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BILTIN_TIME
- bool " Support time service"
+config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_TIME
+ bool "Support time service"
default n
depends on BUSYBOX_CONFIG_INETD
help
Return 32 bit time since 1900 internal inetd service
-config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BILTIN_DAYTIME
- bool " Support daytime service"
+config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DAYTIME
+ bool "Support daytime service"
default n
depends on BUSYBOX_CONFIG_INETD
help
Return human-readable time internal inetd service
-config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BILTIN_CHARGEN
- bool " Support chargen service"
+config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_CHARGEN
+ bool "Support chargen service"
default n
depends on BUSYBOX_CONFIG_INETD
help
Familiar character generator internal inetd service
config BUSYBOX_CONFIG_FEATURE_INETD_RPC
- bool " Support RPC services"
+ bool "Support RPC services"
default n
depends on BUSYBOX_CONFIG_INETD
+ select BUSYBOX_CONFIG_FEATURE_HAVE_RPC
help
- Suuport Sun-RPC based services
-
+ Support Sun-RPC based services
config BUSYBOX_CONFIG_IP
bool "ip"
default n
+ depends on BUSYBOX_CONFIG_PLATFORM_LINUX
help
The "ip" applet is a TCP/IP interface configuration and routing
- utility. You generally don't need "ip" to use busybox with
+ utility. You generally don't need "ip" to use busybox with
TCP/IP.
-if BUSYBOX_CONFIG_IP && BUSYBOX_CONFIG_IPADDR
- config BUSYBOX_CONFIG_FEATURE_IP_ADDRESS
- default n
- comment " address (forced enabled for ipaddr)"
-endif
-if ! (CONFIG_IP && BUSYBOX_CONFIG_IPADDR)
- config BUSYBOX_CONFIG_FEATURE_IP_ADDRESS
- bool " address"
- default n
- depends on BUSYBOX_CONFIG_IP
- help
- Address manipulation support for the "ip" applet.
-endif
-
-if BUSYBOX_CONFIG_IP && BUSYBOX_CONFIG_IPLINK
- config BUSYBOX_CONFIG_FEATURE_IP_LINK
- default n
- comment " link (forced enabled for iplink)"
-endif
-if !(CONFIG_IP && BUSYBOX_CONFIG_IPLINK)
- config BUSYBOX_CONFIG_FEATURE_IP_LINK
- bool " link"
- default n
- depends on BUSYBOX_CONFIG_IP
- help
- Configure network devices with "ip".
-endif
-
-if BUSYBOX_CONFIG_IP && BUSYBOX_CONFIG_IPROUTE
- config BUSYBOX_CONFIG_FEATURE_IP_ROUTE
- default n
- comment " route (forced enabled for iproute)"
-endif
-if !(CONFIG_IP && BUSYBOX_CONFIG_IPROUTE)
- config BUSYBOX_CONFIG_FEATURE_IP_ROUTE
- bool " route"
- default n
- depends on BUSYBOX_CONFIG_IP
- help
- Add support for routing table management to "ip".
-endif
-
-if BUSYBOX_CONFIG_IP && BUSYBOX_CONFIG_IPTUNNEL
- config BUSYBOX_CONFIG_FEATURE_IP_TUNNEL
- default n
- comment " tunnel (forced enabled for iptunnel)"
-endif
-if !(CONFIG_IP && BUSYBOX_CONFIG_IPTUNNEL)
- config BUSYBOX_CONFIG_FEATURE_IP_TUNNEL
- bool " tunnel"
- default n
- depends on BUSYBOX_CONFIG_IP
- help
- Add support for tunneling commands to "ip".
-endif
+config BUSYBOX_CONFIG_FEATURE_IP_ADDRESS
+ bool "ip address"
+ default n
+ depends on BUSYBOX_CONFIG_IP
+ help
+ Address manipulation support for the "ip" applet.
-config BUSYBOX_CONFIG_IPCALC
- bool "ipcalc"
+config BUSYBOX_CONFIG_FEATURE_IP_LINK
+ bool "ip link"
default n
+ depends on BUSYBOX_CONFIG_IP
help
- ipcalc takes an IP address and netmask and calculates the
- resulting broadcast, network, and host range.
+ Configure network devices with "ip".
-config BUSYBOX_CONFIG_FEATURE_IPCALC_FANCY
- bool " Fancy IPCALC, more options, adds 1 kbyte"
+config BUSYBOX_CONFIG_FEATURE_IP_ROUTE
+ bool "ip route"
default n
- depends on BUSYBOX_CONFIG_IPCALC
+ depends on BUSYBOX_CONFIG_IP
help
- Adds the options hostname, prefix and silent to the output of "ipcalc".
+ Add support for routing table management to "ip".
-config BUSYBOX_CONFIG_IPADDR
- bool "ipaddr"
+config BUSYBOX_CONFIG_FEATURE_IP_TUNNEL
+ bool "ip tunnel"
default n
+ depends on BUSYBOX_CONFIG_IP
help
- Equivalent to selecting address support to "ip", above.
+ Add support for tunneling commands to "ip".
-config BUSYBOX_CONFIG_IPLINK
- bool "iplink"
+config BUSYBOX_CONFIG_FEATURE_IP_RULE
+ bool "ip rule"
default n
+ depends on BUSYBOX_CONFIG_IP
help
- Equivalent to selecting link support to "ip", above.
+ Add support for rule commands to "ip".
-config BUSYBOX_CONFIG_IPROUTE
- bool "iproute"
+config BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS
+ bool "Support short forms of ip commands"
+ default n
+ depends on BUSYBOX_CONFIG_IP
+ help
+ Also support short-form of ip <OBJECT> commands:
+ ip addr -> ipaddr
+ ip link -> iplink
+ ip route -> iproute
+ ip tunnel -> iptunnel
+ ip rule -> iprule
+
+ Say N unless you desparately need the short form of the ip
+ object commands.
+
+config BUSYBOX_CONFIG_FEATURE_IP_RARE_PROTOCOLS
+ bool "Support displaying rarely used link types"
default n
+ depends on BUSYBOX_CONFIG_IP
help
- Equivalent to selecting route support to "ip", above.
+ If you are not going to use links of type "frad", "econet",
+ "bif" etc, you probably don't need to enable this.
+ Ethernet, wireless, infrared, ppp/slip, ip tunnelling
+ link types are supported without this option selected.
+
+config BUSYBOX_CONFIG_IPADDR
+ bool
+ default n
+ depends on BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS && BUSYBOX_CONFIG_FEATURE_IP_ADDRESS
+
+config BUSYBOX_CONFIG_IPLINK
+ bool
+ default n
+ depends on BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS && BUSYBOX_CONFIG_FEATURE_IP_LINK
+
+config BUSYBOX_CONFIG_IPROUTE
+ bool
+ default n
+ depends on BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS && BUSYBOX_CONFIG_FEATURE_IP_ROUTE
config BUSYBOX_CONFIG_IPTUNNEL
- bool "iptunnel"
+ bool
+ default n
+ depends on BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS && BUSYBOX_CONFIG_FEATURE_IP_TUNNEL
+
+config BUSYBOX_CONFIG_IPRULE
+ bool
+ default n
+ depends on BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS && BUSYBOX_CONFIG_FEATURE_IP_RULE
+
+config BUSYBOX_CONFIG_IPCALC
+ bool "ipcalc"
+ default n
+ help
+ ipcalc takes an IP address and netmask and calculates the
+ resulting broadcast, network, and host range.
+
+config BUSYBOX_CONFIG_FEATURE_IPCALC_FANCY
+ bool "Fancy IPCALC, more options, adds 1 kbyte"
+ default n
+ depends on BUSYBOX_CONFIG_IPCALC
+ help
+ Adds the options hostname, prefix and silent to the output of
+ "ipcalc".
+
+config BUSYBOX_CONFIG_FEATURE_IPCALC_LONG_OPTIONS
+ bool "Enable long options"
default n
+ depends on BUSYBOX_CONFIG_IPCALC && BUSYBOX_CONFIG_LONG_OPTS
help
- Equivalent to selecting tunnel support to "ip", above.
+ Support long options for the ipcalc applet.
config BUSYBOX_CONFIG_NAMEIF
bool "nameif"
default n
+ depends on BUSYBOX_CONFIG_PLATFORM_LINUX
+ select BUSYBOX_CONFIG_FEATURE_SYSLOG
help
nameif is used to rename network interface by its MAC address.
Renamed interfaces MUST be in the down state.
It is possible to use a file (default: /etc/mactab)
with list of new interface names and MACs.
- Maximum interface name length: IF_NAMESIZE = 16
+ Maximum interface name length: IFNAMSIZ = 16
File fields are separated by space or tab.
File format:
# Comment
new_interface_name XX:XX:XX:XX:XX:XX
-config BUSYBOX_CONFIG_NC
- bool "nc"
- default y
+config BUSYBOX_CONFIG_FEATURE_NAMEIF_EXTENDED
+ bool "Extended nameif"
+ default n
+ depends on BUSYBOX_CONFIG_NAMEIF
help
- A simple Unix utility which reads and writes data across network
- connections.
-
+ This extends the nameif syntax to support the bus_info and driver
+ checks. The syntax is compatible to the normal nameif.
+ File format:
+ new_interface_name driver=asix bus=usb-0000:00:08.2-3
+ new_interface_name bus=usb-0000:00:08.2-3 00:80:C8:38:91:B5
+ new_interface_name mac=00:80:C8:38:91:B5
+ new_interface_name 00:80:C8:38:91:B5
+
config BUSYBOX_CONFIG_NETMSG
bool "netmsg"
default y
help
simple program for sending udp broadcast messages
-config BUSYBOX_CONFIG_NC_GAPING_SECURITY_HOLE
- bool "gaping security hole"
- default n
- depends on BUSYBOX_CONFIG_NC
- help
- Add support for executing a program after making or receiving a
- successful connection (-e option).
-
config BUSYBOX_CONFIG_NETSTAT
bool "netstat"
default y
+ depends on BUSYBOX_CONFIG_PLATFORM_LINUX
help
netstat prints information about the Linux networking subsystem.
+config BUSYBOX_CONFIG_FEATURE_NETSTAT_WIDE
+ bool "Enable wide netstat output"
+ default y
+ depends on BUSYBOX_CONFIG_NETSTAT
+ help
+ Add support for wide columns. Useful when displaying IPv6 addresses
+ (-W option).
+
+config BUSYBOX_CONFIG_FEATURE_NETSTAT_PRG
+ bool "Enable PID/Program name output"
+ default y
+ depends on BUSYBOX_CONFIG_NETSTAT
+ help
+ Add support for -p flag to print out PID and program name.
+ +700 bytes of code.
+
config BUSYBOX_CONFIG_NSLOOKUP
bool "nslookup"
default y
help
nslookup is a tool to query Internet name servers.
+config BUSYBOX_CONFIG_NTPD
+ bool "ntpd"
+ default n
+ depends on BUSYBOX_CONFIG_PLATFORM_LINUX
+ help
+ The NTP client/server daemon.
+
+config BUSYBOX_CONFIG_FEATURE_NTPD_SERVER
+ bool "Make ntpd usable as a NTP server"
+ default n
+ depends on BUSYBOX_CONFIG_NTPD
+ help
+ Make ntpd usable as a NTP server. If you disable this option
+ ntpd will be usable only as a NTP client.
+
config BUSYBOX_CONFIG_PING
bool "ping"
default y
+ depends on BUSYBOX_CONFIG_PLATFORM_LINUX
help
ping uses the ICMP protocol's mandatory ECHO_REQUEST datagram to
elicit an ICMP ECHO_RESPONSE from a host or gateway.
-config BUSYBOX_CONFIG_FEATURE_FANCY_PING
- bool " Enable fancy ping output"
- default y
- depends on BUSYBOX_CONFIG_PING
- help
- Make the output from the ping applet include statistics, and at the
- same time provide full support for ICMP packets.
-
config BUSYBOX_CONFIG_PING6
bool "ping6"
default y
- depends on BUSYBOX_CONFIG_FEATURE_IPV6
+ depends on BUSYBOX_CONFIG_FEATURE_IPV6 && BUSYBOX_CONFIG_PING
help
This will give you a ping that can talk IPv6.
-config BUSYBOX_CONFIG_FEATURE_FANCY_PING6
- bool " Enable fancy ping6 output"
+config BUSYBOX_CONFIG_FEATURE_FANCY_PING
+ bool "Enable fancy ping output"
default y
- depends on BUSYBOX_CONFIG_PING6
+ depends on BUSYBOX_CONFIG_PING
help
- Make the output from the ping6 applet include statistics, and at the
+ Make the output from the ping applet include statistics, and at the
same time provide full support for ICMP packets.
+config BUSYBOX_CONFIG_PSCAN
+ bool "pscan"
+ default n
+ help
+ Simple network port scanner.
+
config BUSYBOX_CONFIG_ROUTE
bool "route"
default y
+ depends on BUSYBOX_CONFIG_PLATFORM_LINUX
help
Route displays or manipulates the kernel's IP routing tables.
+config BUSYBOX_CONFIG_SLATTACH
+ bool "slattach"
+ default n
+ depends on BUSYBOX_CONFIG_PLATFORM_LINUX
+ help
+ slattach is a small utility to attach network interfaces to serial
+ lines.
+
+#config TC
+# bool "tc"
+# default y
+# help
+# show / manipulate traffic control settings
+#
+#config FEATURE_TC_INGRESS
+# def_bool n
+# depends on TC
+
+config BUSYBOX_CONFIG_TCPSVD
+ bool "tcpsvd"
+ default n
+ help
+ tcpsvd listens on a TCP port and runs a program for each new
+ connection.
+
config BUSYBOX_CONFIG_TELNET
bool "telnet"
default y
used to test other simple protocols.
config BUSYBOX_CONFIG_FEATURE_TELNET_TTYPE
- bool " Pass TERM type to remote host"
+ bool "Pass TERM type to remote host"
default y
depends on BUSYBOX_CONFIG_TELNET
help
Setting this option will forward the TERM environment variable to the
- remote host you are connecting to. This is useful to make sure that
+ remote host you are connecting to. This is useful to make sure that
things like ANSI colors and other control sequences behave.
config BUSYBOX_CONFIG_FEATURE_TELNET_AUTOLOGIN
- bool " Pass USER type to remote host"
+ bool "Pass USER type to remote host"
default n
depends on BUSYBOX_CONFIG_TELNET
help
config BUSYBOX_CONFIG_TELNETD
bool "telnetd"
default y
+ select BUSYBOX_CONFIG_FEATURE_SYSLOG
help
A daemon for the TELNET protocol, allowing you to log onto the host
- running the daemon. Please keep in mind that the TELNET protocol
- sends passwords in plain text. If you can't afford the space for an
- SSH daemon and you trust your network, you may say 'y' here. As a
+ running the daemon. Please keep in mind that the TELNET protocol
+ sends passwords in plain text. If you can't afford the space for an
+ SSH daemon and you trust your network, you may say 'y' here. As a
more secure alternative, you should seriously consider installing the
very small Dropbear SSH daemon instead:
http://matt.ucc.asn.au/dropbear/dropbear.html
Note that for busybox telnetd to work you need several things:
First of all, your kernel needs:
- BUSYBOX_CONFIG_UNIX98_PTYS=y
- BUSYBOX_CONFIG_DEVPTS_FS=y
+ UNIX98_PTYS=y
+ DEVPTS_FS=y
Next, you need a /dev/pts directory on your root filesystem:
mount -t devpts devpts /dev/pts
- You need to be sure that Busybox has BUSYBOX_CONFIG_LOGIN and
- BUSYBOX_CONFIG_FEATURE_SUID enabled. And finally, you should make
+ You need to be sure that busybox has LOGIN and
+ FEATURE_SUID enabled. And finally, you should make
certain that Busybox has been installed setuid root:
chown root.root /bin/busybox
with all that done, telnetd _should_ work....
-config BUSYBOX_CONFIG_FEATURE_TELNETD_INETD
- bool " Support call from inetd only"
- default n
+config BUSYBOX_CONFIG_FEATURE_TELNETD_STANDALONE
+ bool "Support standalone telnetd (not inetd only)"
+ default y
depends on BUSYBOX_CONFIG_TELNETD
help
- Selecting this will make telnetd only callable from inetd,
- removing the standalone support.
+ Selecting this will make telnetd able to run standalone.
+
+config BUSYBOX_CONFIG_FEATURE_TELNETD_INETD_WAIT
+ bool "Support -w SEC option (inetd wait mode)"
+ default n
+ depends on BUSYBOX_CONFIG_FEATURE_TELNETD_STANDALONE
+ help
+ This option allows you to run telnetd in "inet wait" mode.
+ Example inetd.conf line (note "wait", not usual "nowait"):
+
+ telnet stream tcp wait root /bin/telnetd telnetd -w10
+
+ In this example, inetd passes _listening_ socket_ as fd 0
+ to telnetd when connection appears.
+ telnetd will wait for connections until all existing
+ connections are closed, and no new connections
+ appear during 10 seconds. Then it exits, and inetd continues
+ to listen for new connections.
+
+ This option is rarely used. "tcp nowait" is much more usual
+ way of running tcp services, including telnetd.
+ You most probably want to say N here.
config BUSYBOX_CONFIG_TFTP
bool "tftp"
default n
help
- This enables the Trivial File Transfer Protocol client program. TFTP
+ This enables the Trivial File Transfer Protocol client program. TFTP
is usually used for simple, small transfers such as a root image
for a network-enabled bootloader.
+config BUSYBOX_CONFIG_TFTPD
+ bool "tftpd"
+ default n
+ help
+ This enables the Trivial File Transfer Protocol server program.
+ It expects that stdin is a datagram socket and a packet
+ is already pending on it. It will exit after one transfer.
+ In other words: it should be run from inetd in nowait mode,
+ or from udpsvd. Example: "udpsvd -E 0 69 tftpd DIR"
+
+comment "Common options for tftp/tftpd"
+ depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD
+
config BUSYBOX_CONFIG_FEATURE_TFTP_GET
- bool " Enable \"get\" command"
+ bool "Enable 'tftp get' and/or tftpd upload code"
default n
- depends on BUSYBOX_CONFIG_TFTP
+ depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD
help
- Add support for the GET command within the TFTP client. This allows
+ Add support for the GET command within the TFTP client. This allows
a client to retrieve a file from a TFTP server.
+ Also enable upload support in tftpd, if tftpd is selected.
+
+ Note: this option does _not_ make tftpd capable of download
+ (the usual operation people need from it)!
config BUSYBOX_CONFIG_FEATURE_TFTP_PUT
- bool " Enable \"put\" command"
+ bool "Enable 'tftp put' and/or tftpd download code"
default n
- depends on BUSYBOX_CONFIG_TFTP
+ depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD
help
- Add support for the PUT command within the TFTP client. This allows
+ Add support for the PUT command within the TFTP client. This allows
a client to transfer a file to a TFTP server.
+ Also enable download support in tftpd, if tftpd is selected.
config BUSYBOX_CONFIG_FEATURE_TFTP_BLOCKSIZE
- bool " Enable \"blocksize\" command"
+ bool "Enable 'blksize' and 'tsize' protocol options"
default n
- depends on BUSYBOX_CONFIG_TFTP
+ depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD
help
- Allow the client to specify the desired block size for transfers.
+ Allow tftp to specify block size, and tftpd to understand
+ "blksize" and "tsize" options.
-config BUSYBOX_CONFIG_FEATURE_TFTP_DEBUG
- bool " Enable debug"
+config BUSYBOX_CONFIG_FEATURE_TFTP_PROGRESS_BAR
+ bool "Enable tftp progress meter"
default n
- depends on BUSYBOX_CONFIG_TFTP
+ depends on BUSYBOX_CONFIG_TFTP && BUSYBOX_CONFIG_FEATURE_TFTP_BLOCKSIZE
help
- Enable debug settings for tftp. This is useful if you're running
- into problems with tftp as the protocol doesn't help you much when
- you run into problems.
+ Show progress bar.
+
+config BUSYBOX_CONFIG_TFTP_DEBUG
+ bool "Enable debug"
+ default n
+ depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD
+ help
+ Make tftp[d] print debugging messages on stderr.
+ This is useful if you are diagnosing a bug in tftp[d].
config BUSYBOX_CONFIG_TRACEROUTE
bool "traceroute"
default y
+ depends on BUSYBOX_CONFIG_PLATFORM_LINUX
+ help
+ Utility to trace the route of IP packets.
+
+config BUSYBOX_CONFIG_TRACEROUTE6
+ bool "traceroute6"
+ default n
+ depends on BUSYBOX_CONFIG_FEATURE_IPV6 && BUSYBOX_CONFIG_TRACEROUTE
help
- Utility to trace the route of IP packets
+ Utility to trace the route of IPv6 packets.
config BUSYBOX_CONFIG_FEATURE_TRACEROUTE_VERBOSE
- bool " Enable verbose output"
+ bool "Enable verbose output"
default y
depends on BUSYBOX_CONFIG_TRACEROUTE
help
- Add some verbosity to traceroute. This includes amongst other things
+ Add some verbosity to traceroute. This includes among other things
hostnames and ICMP response types.
config BUSYBOX_CONFIG_FEATURE_TRACEROUTE_SOURCE_ROUTE
- bool " Enable loose source route"
+ bool "Enable loose source route"
default n
depends on BUSYBOX_CONFIG_TRACEROUTE
help
(8 maximum).
config BUSYBOX_CONFIG_FEATURE_TRACEROUTE_USE_ICMP
- bool " Use ICMP instead of UDP"
+ bool "Use ICMP instead of UDP"
default n
depends on BUSYBOX_CONFIG_TRACEROUTE
help
- Add feature to allow for ICMP ECHO instead of UDP datagrams.
+ Add option -I to use ICMP ECHO instead of UDP datagrams.
+
+config BUSYBOX_CONFIG_TUNCTL
+ bool "tunctl"
+ default n
+ depends on BUSYBOX_CONFIG_PLATFORM_LINUX
+ help
+ tunctl creates or deletes tun devices.
+config BUSYBOX_CONFIG_FEATURE_TUNCTL_UG
+ bool "Support owner:group assignment"
+ default n
+ depends on BUSYBOX_CONFIG_TUNCTL
+ help
+ Allow to specify owner and group of newly created interface.
+ 340 bytes of pure bloat. Say no here.
+
+source package/busybox/config/networking/udhcp/Config.in
+
+config BUSYBOX_CONFIG_IFUPDOWN_UDHCPC_CMD_OPTIONS
+ string "ifup udhcpc command line options"
+ default "-R -n"
+ depends on BUSYBOX_CONFIG_IFUPDOWN && BUSYBOX_CONFIG_UDHCPC
+ help
+ Command line options to pass to udhcpc from ifup.
+ Intended to alter options not available in /etc/network/interfaces.
+ (IE: --syslog --background etc...)
+
+config BUSYBOX_CONFIG_UDPSVD
+ bool "udpsvd"
+ default n
+ help
+ udpsvd listens on an UDP port and runs a program for each new
+ connection.
config BUSYBOX_CONFIG_VCONFIG
bool "vconfig"
default y
+ depends on BUSYBOX_CONFIG_PLATFORM_LINUX
help
Creates, removes, and configures VLAN interfaces
HTTPS, and FTP servers.
config BUSYBOX_CONFIG_FEATURE_WGET_STATUSBAR
- bool " Enable a nifty process meter (+2k)"
+ bool "Enable a nifty process meter (+2k)"
default y
depends on BUSYBOX_CONFIG_WGET
help
Enable the transfer progress bar for wget transfers.
config BUSYBOX_CONFIG_FEATURE_WGET_AUTHENTICATION
- bool " Enable HTTP authentication"
+ bool "Enable HTTP authentication"
default y
depends on BUSYBOX_CONFIG_WGET
help
Support authenticated HTTP transfers.
-config BUSYBOX_CONFIG_FEATURE_WGET_IP6_LITERAL
- bool " Enable IPv6 literal addresses"
+config BUSYBOX_CONFIG_FEATURE_WGET_LONG_OPTIONS
+ bool "Enable long options"
default y
- depends on BUSYBOX_CONFIG_WGET
+ depends on BUSYBOX_CONFIG_WGET && BUSYBOX_CONFIG_LONG_OPTS
help
- Support IPv6 address literal notation in URLs.
+ Support long options for the wget applet.
-source package/busybox/config/networking/udhcp/Config.in
+config BUSYBOX_CONFIG_FEATURE_WGET_TIMEOUT
+ bool "Enable read timeout option -T SEC"
+ default n
+ depends on BUSYBOX_CONFIG_WGET
+ help
+ Supports network read timeout for wget, so that wget will give
+ up and timeout when reading network data, through the -T command
+ line option. Currently only network data read timeout is
+ supported (i.e., timeout is not applied to the DNS nor TCP
+ connection initialization). When FEATURE_WGET_LONG_OPTIONS is
+ also enabled, the --timeout option will work in addition to -T.
config BUSYBOX_CONFIG_ZCIP
bool "zcip"
default n
+ depends on BUSYBOX_CONFIG_PLATFORM_LINUX
+ select BUSYBOX_CONFIG_FEATURE_SYSLOG
help
ZCIP provides ZeroConf IPv4 address selection, according to RFC 3927.
It's a daemon that allocates and defends a dynamically assigned
in the busybox examples.
endmenu
-
projects / openwrt.git / blobdiff