generic: rtl8366: use struct rtl8366_smi instead of struct rtl8366{s,rb}

[openwrt.git] / target / linux / generic-2.6 / files / drivers / net / phy / ar8216.h

diff --git a/target/linux/generic-2.6/files/drivers/net/phy/ar8216.h b/target/linux/generic-2.6/files/drivers/net/phy/ar8216.h
index a729ac4..5a8fa3c 100644 (file)
--- a/target/linux/generic-2.6/files/drivers/net/phy/ar8216.h
+++ b/target/linux/generic-2.6/files/drivers/net/phy/ar8216.h
@@ -22,10 +22,27 @@
 #define AR8216_PORT_CPU        0
 #define AR8216_NUM_PORTS       6
 #define AR8216_NUM_VLANS       16
+#define AR8316_NUM_VLANS       4096
+
+/* Atheros specific MII registers */
+#define MII_ATH_DBG_ADDR               0x1d
+#define MII_ATH_DBG_DATA               0x1e
 
 #define AR8216_REG_CTRL                        0x0000
+#define   AR8216_CTRL_REVISION         BITS(0, 8)
+#define   AR8216_CTRL_REVISION_S       0
+#define   AR8216_CTRL_VERSION          BITS(8, 8)
+#define   AR8216_CTRL_VERSION_S                8
 #define   AR8216_CTRL_RESET            BIT(31)
 
+#define AR8216_REG_FLOOD_MASK          0x002C
+#define   AR8216_FM_UNI_DEST_PORTS     BITS(0, 6)
+#define   AR8216_FM_MULTI_DEST_PORTS   BITS(16, 6)
+
+#define AR8216_REG_GLOBAL_CTRL         0x0030
+#define   AR8216_GCTRL_MTU             BITS(0, 11)
+#define   AR8316_GCTRL_MTU             BITS(0, 14)
+
 #define AR8216_REG_VTU                 0x0040
 #define   AR8216_VTU_OP                        BITS(0, 3)
 #define   AR8216_VTU_OP_NOOP           0x0
@@ -59,19 +76,24 @@
 #define   AR8216_ATU_ACTIVE            BIT(3)
 #define   AR8216_ATU_PORT_NUM          BITS(8, 4)
 #define   AR8216_ATU_FULL_VIO          BIT(12)
-#define   AR8216_ATU_ADDR4             BIT(16, 8)
-#define   AR8216_ATU_ADDR5             BIT(24, 8)
+#define   AR8216_ATU_ADDR4             BITS(16, 8)
+#define   AR8216_ATU_ADDR5             BITS(24, 8)
 
 #define AR8216_REG_ATU_DATA            0x0054
-#define   AR8216_ATU_ADDR3             BIT(0, 8)
-#define   AR8216_ATU_ADDR2             BIT(8, 8)
-#define   AR8216_ATU_ADDR1             BIT(16, 8)
-#define   AR8216_ATU_ADDR0             BIT(24, 8)
+#define   AR8216_ATU_ADDR3             BITS(0, 8)
+#define   AR8216_ATU_ADDR2             BITS(8, 8)
+#define   AR8216_ATU_ADDR1             BITS(16, 8)
+#define   AR8216_ATU_ADDR0             BITS(24, 8)
 
-#define AR8216_PORT_OFFSET(_i)         (0x0100 * (i + 1))
+#define AR8216_REG_ATU_CTRL            0x005C
+#define   AR8216_ATU_CTRL_AGE_EN       BIT(17)
+#define   AR8216_ATU_CTRL_AGE_TIME     BITS(0, 16)
+#define   AR8216_ATU_CTRL_AGE_TIME_S   0
+
+#define AR8216_PORT_OFFSET(_i)         (0x0100 * (_i + 1))
 #define AR8216_REG_PORT_STATUS(_i)     (AR8216_PORT_OFFSET(_i) + 0x0000)
-#define   AR8216_PORT_STATUS_SPEED     BIT(0)
-#define   AR8216_PORT_STATUS_SPEED_ERR BIT(1)
+#define   AR8216_PORT_STATUS_SPEED     BITS(0,2)
+#define   AR8216_PORT_STATUS_SPEED_S   0
 #define   AR8216_PORT_STATUS_TXMAC     BIT(2)
 #define   AR8216_PORT_STATUS_RXMAC     BIT(3)
 #define   AR8216_PORT_STATUS_TXFLOW    BIT(4)
@@ -120,6 +142,17 @@
 #define   AR8216_PORT_VLAN_MODE                BITS(30, 2)
 #define   AR8216_PORT_VLAN_MODE_S      30
 
+#define AR8216_REG_PORT_RATE(_i)       (AR8216_PORT_OFFSET(_i) + 0x000c)
+#define AR8216_REG_PORT_PRIO(_i)       (AR8216_PORT_OFFSET(_i) + 0x0010)
+
+/* port speed */
+enum {
+        AR8216_PORT_SPEED_10M = 0,
+        AR8216_PORT_SPEED_100M = 1,
+        AR8216_PORT_SPEED_1000M = 2,
+        AR8216_PORT_SPEED_ERR = 3,
+};
+
 /* ingress 802.1q mode */
 enum {
        AR8216_IN_PORT_ONLY = 0,
@@ -144,4 +177,11 @@ enum {
        AR8216_PORT_STATE_FORWARD = 4
 };
 
+/* device */
+enum {
+  UNKNOWN = 0,
+  AR8216 = 8216,
+  AR8316 = 8316
+};
+
 #endif