* $Id$
*
* Copyright (C) 2007 OpenWrt.org
- * Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
+ * Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
*
- * This code was based on the information of the ZyXEL's firmware
- * image format written by Kolja Waschk, can be found at:
+ * This code was based on the information of the ZyXEL's firmware
+ * image format written by Kolja Waschk, can be found at:
* http://www.ixo.de/info/zyxel_uclinux
*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
*
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the
- * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
- * Boston, MA 02110-1301, USA.
*/
#include <stdio.h>
#include <stdlib.h>
#include <stdint.h>
#include <string.h>
-#include <unistd.h> /* for unlink() */
+#include <unistd.h> /* for unlink() */
#include <libgen.h>
-#include <getopt.h> /* for getopt() */
+#include <getopt.h> /* for getopt() */
#include <stdarg.h>
#include <errno.h>
#include <sys/stat.h>
-#include <endian.h> /* for __BYTE_ORDER */
+#include <endian.h> /* for __BYTE_ORDER */
#if defined(__CYGWIN__)
# include <byteswap.h>
#endif
struct board_info {
char *name; /* model name */
char *desc; /* description */
+ uint16_t vendor; /* vendor id */
uint16_t model; /* model id */
uint32_t flash_base; /* flash base address */
uint32_t flash_size; /* board flash size */
#define AR7_FLASH_BASE 0xB0000000
#define AR7_CODE_START 0x94008000
-#define BOARD(n, d, m, fb, fs, cs, fo) { \
- .name = (n), .desc=(d), .model = (m), \
+#define ATHEROS_FLASH_BASE 0xBFC00000
+#define ATHEROS_CODE_START 0x80e00000
+
+#define BOARD(n, d, v, m, fb, fs, cs, fo) { \
+ .name = (n), .desc=(d), \
+ .vendor = (v), .model = (m), \
.flash_base = (fb), .flash_size = (fs)<<20, \
.code_start = (cs), .fw_offs = (fo) \
}
-#define ADMBOARD1(n, d, m, fs) BOARD(n, d, m, \
+#define ADMBOARD1(n, d, m, fs) BOARD(n, d, ZYNOS_VENDOR_ID_ZYXEL, m, \
ADM5120_FLASH_BASE, fs, ADM5120_CODE_START, 0x8000)
-#define ADMBOARD2(n, d, m, fs) BOARD(n, d, m, \
+#define ADMBOARD2(n, d, m, fs) BOARD(n, d, ZYNOS_VENDOR_ID_ZYXEL, m, \
ADM5120_FLASH_BASE, fs, ADM5120_CODE_START, 0x10000)
-#define AR7BOARD1(n, d, m, fs) BOARD(n, d, m, \
+#define AR7BOARD1(n, d, m, fs) BOARD(n, d, ZYNOS_VENDOR_ID_ZYXEL, m, \
AR7_FLASH_BASE, fs, AR7_CODE_START, 0x8000)
+#define ATHEROSBOARD1(n, d, m, fs) BOARD(n, d, ZYNOS_VENDOR_ID_ZYXEL, m, \
+ ATHEROS_FLASH_BASE, fs, ATHEROS_CODE_START, 0x30000)
+
static struct board_info boards[] = {
- /*
- * Infineon/ADMtek ADM5120 based boards
+ /*
+ * Infineon/ADMtek ADM5120 based boards
*/
ADMBOARD2("ES-2024A", "ZyXEL ES-2024A", ZYNOS_MODEL_ES_2024A, 4),
ADMBOARD2("ES-2024PWR", "ZyXEL ES-2024PWR", ZYNOS_MODEL_ES_2024PWR, 4),
ADMBOARD1("P-335Plus", "ZyXEL Prestige 335Plus", ZYNOS_MODEL_P_335PLUS, 4),
ADMBOARD1("P-335U", "ZyXEL Prestige 335U", ZYNOS_MODEL_P_335U, 4),
ADMBOARD1("P-335WT", "ZyXEL Prestige 335WT", ZYNOS_MODEL_P_335WT, 4),
+
#if 0
- /*
+ /*
* Texas Instruments AR7 based boards
*/
AR7BOARD1("P-660H-61", "ZyXEL P-660H-61", ZYNOS_MODEL_P_660H_61, 2),
AR7BOARD1("P-660R-D1", "ZyXEL P-660R-D1", ZYNOS_MODEL_P_660R_D1, 2),
AR7BOARD1("P-660R-D3", "ZyXEL P-660R-D3", ZYNOS_MODEL_P_660R_D3, 2),
#endif
+ {
+ .name = "O2SURF",
+ .desc = "O2 DSL Surf & Phone",
+ .vendor = ZYNOS_VENDOR_ID_O2,
+ .model = ZYNOS_MODEL_O2SURF,
+ .flash_base = AR7_FLASH_BASE,
+ .flash_size = 8*1024*1024,
+ .code_start = 0x94014000,
+ .fw_offs = 0x40000,
+ },
+
+ /*
+:x
+ */
+ ATHEROSBOARD1("NBG-318S", "ZyXEL NBG-318S", ZYNOS_MODEL_NBG_318S, 4),
+
{.name = NULL}
};
*/
#define ERR(fmt, ...) do { \
fflush(0); \
- fprintf(stderr, "[%s] *** error: " fmt "\n", progname, ## __VA_ARGS__ ); \
+ fprintf(stderr, "[%s] *** error: " fmt "\n", \
+ progname, ## __VA_ARGS__ ); \
} while (0)
#define ERRS(fmt, ...) do { \
int save = errno; \
fflush(0); \
- fprintf(stderr, "[%s] *** error: " fmt ", %s\n", progname, ## __VA_ARGS__ \
- , strerror(save)); \
+ fprintf(stderr, "[%s] *** error: " fmt ", %s\n", \
+ progname, ## __VA_ARGS__, strerror(save)); \
} while (0)
#define WARN(fmt, ...) do { \
- fprintf(stderr, "[%s] *** warning: " fmt "\n", progname, ## __VA_ARGS__ ); \
+ fprintf(stderr, "[%s] *** warning: " fmt "\n", \
+ progname, ## __VA_ARGS__ ); \
} while (0)
#define DBG(lev, fmt, ...) do { \
{
char *err = NULL;
uint32_t t;
-
+
errno=0;
t = strtoul(arg, &err, 0);
if (errno || (err==arg) || ((err != NULL) && *err)) {
if (errno || (err==arg) || ((err != NULL) && *err) || (t >= 0x10000)) {
return -1;
}
-
+
*val = t & 0xFFFF;
return 0;
}
if (errno || (err==arg) || ((err != NULL) && *err) || (t >= 0x100)) {
return -1;
}
-
+
*val = t & 0xFF;
return 0;
}
return -1;
*sig = arg[0] | (arg[1] << 8) | (arg[2] << 16) | (arg[3] << 24);
-
+
return 0;
}
if (write_out_data(outfile, buf, buflen, css))
return -1;
-
+
len -= buflen;
}
}
/* setup temporary header fields */
- memset(&t,0, sizeof(t));
+ memset(&t, 0, sizeof(t));
t.addr = HOST_TO_BE32(hdr->addr);
memcpy(&t.sig, ROMBIN_SIGNATURE, ROMBIN_SIG_LEN);
t.type = hdr->type;
char *data;
int res;
- memset(buf,0,sizeof(buf));
+ memset(buf, 0, sizeof(buf));
mh = (struct zyn_mmt_hdr *)buf;
/* TODO: needs to recreate the memory map too? */
mh->count=0;
-
+
/* Build user data section */
data = buf+sizeof(*mh);
- data += sprintf(data,"Model 1 %d", BE16_TO_HOST(board->model));
+ data += sprintf(data, "Vendor 1 %d", board->vendor);
+ *data++ = '\0';
+ data += sprintf(data, "Model 1 %d", BE16_TO_HOST(board->model));
*data++ = '\0';
/* TODO: make hardware version configurable? */
- data += sprintf(data,"HwVerRange 2 %d %d", 0, 0);
+ data += sprintf(data, "HwVerRange 2 %d %d", 0, 0);
*data++ = '\0';
user_size = (uint8_t *)data - buf;
mh->csum = HOST_TO_BE16(csum_buf(buf+sizeof(*mh), user_size));
res = write_out_data(outfile, buf, sizeof(buf), css);
-
+
return res;
}
write_out_block(FILE *outfile, struct fw_block *block, struct csum_state *css)
{
int res;
-
+
if (block == NULL)
return 0;
if (block->file_size == 0)
return 0;
- res = write_out_file(outfile, block->file_name,
+ res = write_out_file(outfile, block->file_name,
block->file_size, css);
return res;
}
uint32_t padlen;
/* setup header fields */
+ memset(&hdr, 0, sizeof(hdr));
hdr.addr = board->code_start;
hdr.type = OBJECT_TYPE_BOOTEXT;
- hdr.flags = ROMBIN_FLAG_40;
+ hdr.flags = ROMBIN_FLAG_OCSUM;
res = write_out_header(outfile, &hdr);
if (res)
return -1;
}
- if (required_arg(ch, arg))
+ if (required_arg(ch, arg))
return -1;
ofname = arg;
struct fw_block *block;
int i;
- if ( num_blocks > MAX_NUM_BLOCKS ) {
+ if ( num_blocks >= MAX_NUM_BLOCKS ) {
ERR("too many blocks specified");
return -1;
}
block = &blocks[num_blocks++];
-
+
/* setup default field values */
block->padc = 0xFF;
avail = board->flash_size - board->fw_offs - next_offs;
if (next_offs + block->file_size > avail) {
ERR("file %s is too big, offset = %u, size=%u,"
- " align = %u", block->file_name,
- (unsigned)next_offs,
- (unsigned)block->file_size,
+ " align = %u", block->file_name,
+ (unsigned)next_offs,
+ (unsigned)block->file_size,
(unsigned)block->align);
res = -1;
break;
block->padlen = next_offs - *offset;
*offset += block->file_size;
}
-
+
return res;
}
int res = EXIT_FAILURE;
FILE *outfile;
-
+
progname=basename(argv[0]);
opterr = 0; /* could not print standard getopt error messages */
while ( 1 ) {
optinvalid = 0;
-
+
c = getopt(argc, argv, "b:B:ho:r:v");
if (c == -1)
break;
ERR("invalid option: %s", argv[optind]);
goto out;
}
-
+
if (process_blocks() != 0) {
goto out;