-define Image/Prepare
- cp $(LINUX_DIR)/arch/arm/boot/uImage $(KDIR)/uImage
-endef
-
-define Image/BuildKernel
-# WRT350N v2: mach id 1633 (0x661)
- echo -en "\x06\x1c\xa0\xe3\x61\x10\x81\xe3" > $(KDIR)/wrt350nv2-zImage
- cat $(LINUX_DIR)/arch/arm/boot/zImage >> $(KDIR)/wrt350nv2-zImage
- $(STAGING_DIR_HOST)/bin/mkimage -A arm -O linux -T kernel \
- -C none -a 0x00008000 -e 0x00008000 -n 'Linux-$(LINUX_VERSION)' \
- -d $(KDIR)/wrt350nv2-zImage $(KDIR)/wrt350nv2-uImage
- cp $(KDIR)/wrt350nv2-uImage $(BIN_DIR)/openwrt-wrt350nv2-uImage
-# WNR854T: mach id 1801 (0x709)
- echo -en "\x07\x1c\xa0\xe3\x09\x10\x81\xe3" > $(KDIR)/wnr854t-zImage
- cat $(LINUX_DIR)/arch/arm/boot/zImage >> $(KDIR)/wnr854t-zImage
- $(STAGING_DIR_HOST)/bin/mkimage -A arm -O linux -T kernel \
- -C none -a 0x00008000 -e 0x00008000 -n 'Linux-$(LINUX_VERSION)' \
- -d $(KDIR)/wnr854t-zImage $(KDIR)/wnr854t-uImage
- cp $(KDIR)/wnr854t-uImage $(BIN_DIR)/openwrt-wnr854t-uImage
-# DT2: mach id 1514 (0x5EA)
- echo -en "\x05\x1c\xa0\xe3\xea\x10\x81\xe3" > $(KDIR)/dt2-zImage
- cat $(LINUX_DIR)/arch/arm/boot/zImage >> $(KDIR)/dt2-zImage
- $(STAGING_DIR_HOST)/bin/mkimage -A arm -O linux -T kernel \
- -C none -a 0x00008000 -e 0x00008000 -n 'Linux-$(LINUX_VERSION)' \
- -d $(KDIR)/dt2-zImage $(KDIR)/dt2-uImage
- cp $(KDIR)/dt2-uImage $(BIN_DIR)/openwrt-dt2-uImage
-endef
-
-define Image/Build/Netgear
- mkdir $(KDIR)/netgear_image
- cp $(KDIR)/wnr854t-uImage $(KDIR)/netgear_image/uImage
- $(STAGING_DIR_HOST)/bin/mkfs.jffs2 -m none -p -l -q -e 128KiB -o $(KDIR)/wnr854t-uImage.jffs2 -d $(KDIR)/netgear_image
- rm -rf $(KDIR)/netgear_image
- ( \
- dd if=$(KDIR)/wnr854t-uImage.jffs2 bs=1024k conv=sync; \
- dd if=$(KDIR)/root.$(1) bs=128k conv=sync; \
- ) > $(BIN_DIR)/openwrt-$(2)-$(1).img
- $(STAGING_DIR_HOST)/bin/add_header $(3) $(BIN_DIR)/openwrt-$(2)-$(1).img $(BIN_DIR)/openwrt-$(2)-$(1)-webupgrade.img
-endef
-
-define Image/Build/Linksys
-# WRT350N v2 images
-# sysupgrade image
- ( \
- dd if="${KDIR}/$2-uImage" bs=$5 conv=sync; \
- dd if="${KDIR}/root.$1" bs=64k conv=sync; \
- ) > "${BIN_DIR}/openwrt-$2-$1.img"
-# recovery image and webupgrade image for stock firmware
- rm -rf "${TMP_DIR}/$2_webupgrade"
- mkdir "${TMP_DIR}/$2_webupgrade"
-# create parameter file
- echo ":kernel $5 ${BIN_DIR}/openwrt-$2-uImage" >"${TMP_DIR}/$2_webupgrade/$2.par"
- echo ":rootfs 0 ${KDIR}/root.$1" >>"${TMP_DIR}/$2_webupgrade/$2.par"
-# create webupgrade image
- ( cd "${TMP_DIR}/$2_webupgrade"; \
- "${STAGING_DIR_HOST}/bin/$2-builder" \
- -v "${TMP_DIR}/$2_webupgrade/$2.par" \
- "${BIN_DIR}/openwrt-$2-$1-webupgrade.img"; \
- )
-# copy bin file as recovery image
- $(CP) "${TMP_DIR}/$2_webupgrade/openwrt-$2-$1-webupgrade.bin" "$(BIN_DIR)/openwrt-$2-$1-recovery.bin"
- rm -rf "${TMP_DIR}/$2_webupgrade"
-endef
-
-define Image/Build/Freecom
- $(INSTALL_DIR) $(TARGET_DIR)/boot
- # TODO: Add special CMDLINE shim for webupgrade image here
- $(CP) $(KDIR)/dt2-uImage $(TARGET_DIR)/boot/uImage
- rm -rf $(TARGET_DIR)/{var,jffs,rom}
- $(INSTALL_DIR) $(TARGET_DIR)/var
- $(TAR) cfj $(BIN_DIR)/openwrt-$(2)-$(1).img --numeric-owner --owner=0 --group=0 -C $(TARGET_DIR)/ .
- $(STAGING_DIR_HOST)/bin/encode_crc $(BIN_DIR)/openwrt-$(2)-$(1).img $(BIN_DIR)/openwrt-$(2)-$(1)-webupgrade.img $(3)
-endef
-
-define Image/Build
- $(call Image/Build/$(1),$(1))
- $(call Image/Build/Netgear,$(1),wnr854t,NG_WNR854T,$(1))
- $(call Image/Build/Linksys,$(1),wrt350nv2,WNR350Nv2,$(1),1048576) # 5th parameter is kernel mtd size 0x00100000 = 1048576 / 0x001A0000 = 1703936
- $(call Image/Build/Freecom,$(1),dt2,DT,$(1))
-endef
-
-define Image/Build/squashfs
- $(call prepare_generic_squashfs,$(KDIR)/root.squashfs)
- ( \
- dd if=$(KDIR)/uImage bs=1024k conv=sync; \
- dd if=$(KDIR)/root.$(1) bs=128k conv=sync; \
- ) > $(BIN_DIR)/openwrt-$(BOARD)-$(1).img
-endef