+ Enable PCI and Cardbus support for the following chipset based cards:
+
+ * ISL3880 - Prism GT 802.11 b/g
+ * ISL3877 - Prism Indigo 802.11 a
+ * ISL3890 - Prism Duette 802.11 a/b/g
+
+ For a complete list of supported cards visit <http://prism54.org>.
+ Here is the latest confirmed list of supported cards:
+
+ * 3com OfficeConnect 11g Cardbus Card aka 3CRWE154G72
+ * Allnet ALL0271 PCI Card
+ * Compex WL54G Cardbus Card
+ * Corega CG-WLCB54GT Cardbus Card
+ * D-Link Air Plus Xtreme G A1 Cardbus Card aka DWL-g650
+ * I-O Data WN-G54/CB Cardbus Card
+ * Kobishi XG-300 aka Z-Com Cardbus Card
+ * Netgear WG511 Cardbus Card
+ * Ovislink WL-5400PCI PCI Card
+ * Peabird WLG-PCI PCI Card
+ * Sitecom WL-100i Cardbus Card
+ * Sitecom WL-110i PCI Card
+ * SMC2802W - EZ Connect g 2.4GHz 54 Mbps Wireless PCI Card
+ * SMC2835W - EZ Connect g 2.4GHz 54 Mbps Wireless Cardbus Card
+ * Z-Com XG-900 PCI Card
+ * Zyxel G-100 Cardbus Card
+
+ If you enable this, you require a firmware file as well.
+ You will need to copy this to /usr/lib/hotplug/firmware/isl3890.
+ You can get this non-GPL'd firmware file from the Prism54 project page:
+ <http://prism54.org>.
+
+ Note: You need a motherboard with DMA support to use any of these cards.
+
+comment "PCMCIA/CardBus support"
+
+config BR2_PACKAGE_KMOD_PCMCIA_CORE
+ prompt "kmod-pcmcia-core.................. PCMCIA/CardBus support"
+ tristate
+ default m
+
+config BR2_PACKAGE_KMOD_PCMCIA_SERIAL
+ prompt "kmod-pcmcia-serial.............. PCMCIA/CardBus serial device support"
+ tristate
+ default m
+ depends BR2_PACKAGE_KMOD_PCMCIA_CORE
+
+comment "USB support"
+
+config BR2_PACKAGE_KMOD_USB
+ prompt "kmod-usb-core..................... USB support"
+ tristate
+ default m
+
+config BR2_PACKAGE_KMOD_USB_UHCI
+ prompt "kmod-usb-uhci................... Support for UHCI controllers"
+ tristate
+ default m
+ depends BR2_PACKAGE_KMOD_USB
+ select BR2_PACKAGE_KMOD_USB_CONTROLLER
+
+config BR2_PACKAGE_KMOD_USB_OHCI
+ prompt "kmod-usb-ohci................... Support for OHCI controllers"
+ tristate
+ default m
+ depends BR2_PACKAGE_KMOD_USB
+ select BR2_PACKAGE_KMOD_USB_CONTROLLER
+
+config BR2_PACKAGE_KMOD_USB2
+ prompt "kmod-usb2....................... Support for USB 2.0 controllers"
+ tristate
+ default m
+ depends BR2_PACKAGE_KMOD_USB
+ select BR2_PACKAGE_KMOD_USB_CONTROLLER
+
+config BR2_PACKAGE_KMOD_USB_CONTROLLER
+ tristate
+ depends on BR2_PACKAGE_KMOD_USB_UHCI || BR2_PACKAGE_KMOD_USB_OHCI || BR2_PACKAGE_KMOD_USB2
+ default n
+
+config BR2_PACKAGE_KMOD_USB_ACM
+ prompt "kmod-usb-acm...................... Support for USB modems/isdn controllers"
+ tristate
+ default m
+ depends BR2_PACKAGE_KMOD_USB_CONTROLLER
+
+config BR2_PACKAGE_KMOD_USB_AUDIO
+ prompt "kmod-usb-audio.................... Support for USB soundcards"
+ tristate
+ default m
+ depends BR2_PACKAGE_KMOD_USB_CONTROLLER
+ select BR2_PACKAGE_KMOD_SOUNDCORE
+
+config BR2_PACKAGE_KMOD_USB_PRINTER
+ prompt "kmod-usb-printer.................. Support for USB printers"
+ tristate
+ default m
+ depends BR2_PACKAGE_KMOD_USB_CONTROLLER
+
+config BR2_PACKAGE_KMOD_USB_SERIAL
+ prompt "kmod-usb-serial................... Support for USB-to-serial converters"
+ tristate
+ default m
+ depends BR2_PACKAGE_KMOD_USB_CONTROLLER
+
+config BR2_PACKAGE_KMOD_USB_SERIAL_BELKIN
+ prompt "kmod-usb-serial-belkin.......... Support for Belkin USB-to-serial converters"
+ tristate
+ default m
+ depends BR2_PACKAGE_KMOD_USB_SERIAL
+
+config BR2_PACKAGE_KMOD_USB_SERIAL_FTDI
+ prompt "kmod-usb-serial-ftdi............ Support for FTDI USB-to-serial converterr"
+ tristate
+ default m
+ depends BR2_PACKAGE_KMOD_USB_SERIAL
+
+config BR2_PACKAGE_KMOD_USB_SERIAL_MCT_U232
+ prompt "kmod-usb-serial-mct-u232........ Support for Magic Control Technology USB-to-Serial converters"
+ tristate
+ default m
+ depends BR2_PACKAGE_KMOD_USB_SERIAL
+
+config BR2_PACKAGE_KMOD_USB_SERIAL_PL2303
+ prompt "kmod-usb-serial-pl2303.......... Support for Prolific PL2303 USB-to-Serial converters"
+ tristate
+ default m
+ depends BR2_PACKAGE_KMOD_USB_SERIAL
+
+config BR2_PACKAGE_KMOD_USB_STORAGE
+ prompt "kmod-usb-storage.................. Support for USB storage devices"
+ tristate
+ default m
+ depends BR2_PACKAGE_KMOD_USB_CONTROLLER
+
+comment "Misc. devices support"
+
+config BR2_PACKAGE_KMOD_AX25
+ prompt "kmod-ax25......................... AX25 support"
+ tristate
+ default m
+ help
+ Kernel modules for AX25 protocol family
+
+ This package contains both the AX25 layer 2 support (ax25) and AX25 KISS driver (mkiss)
+
+config BR2_PACKAGE_KMOD_BLUETOOTH
+ prompt "kmod-bluetooth.................... Bluetooth drivers and network stack"
+ tristate
+ default m
+ help
+ Bluetooth drivers and network stack
+
+config BR2_PACKAGE_KMOD_LP
+ prompt "kmod-lp........................... Parallel port and lp support"
+ tristate
+ default m
+ help
+ Kernel modules for line printer and parallel port support
+
+config BR2_PACKAGE_KMOD_WD1100
+ prompt "kmod-wd1100....................... Soekris net4801 watchdog"
+ tristate
+ default y
+ depends BR2_LINUX_2_4_X86
+ help
+ Driver for the NatSemi SC1x00 series Watchdog
+ found on Soekris net4801 boards
+
+comment "Additional kernel modules"
projects / openwrt.git / blobdiff