ar71xx: change firmware image name for th TP-Link boards

[openwrt.git] / target / linux / brcm-2.4 / base-files / etc / init.d / netconfig

diff --git a/target/linux/brcm-2.4/base-files/etc/init.d/netconfig b/target/linux/brcm-2.4/base-files/etc/init.d/netconfig
index 7e3ebcd..638f664 100755 (executable)
--- a/target/linux/brcm-2.4/base-files/etc/init.d/netconfig
+++ b/target/linux/brcm-2.4/base-files/etc/init.d/netconfig
@@ -4,7 +4,41 @@
 START=05
 
 start() {
 START=05
 
 start() {

-       [ -e /etc/config/network ] && exit 0
+       [ -e /etc/config/network ] && {
+               local batch
+
+               config_cb() {
+                       case "$1" in
+                       switch)
+                               option_cb() {
+                                       case "$1" in
+                                       vlan[0-9]|vlan1[0-5])
+                                               local id="${1#vlan}"
+                                               append batch "delete network.eth0.${1}${N}"
+                                               append batch "set network.eth0_${id}=switch_vlan${N}"
+                                               append batch "set network.eth0_${id}.device=eth0${N}"
+                                               append batch "set network.eth0_${id}.vlan=${id}${N}"
+                                               append batch "set network.eth0_${id}.ports='${2}'${N}"
+                                       ;;
+                                       esac
+                               }
+                       ;;
+                       switch_vlan)
+                               option_cb() { :; }
+                               batch=""
+                       ;;
+                       esac
+               }
+
+               config_load network
+
+               [ -n "$batch" ] && {
+                       logger -t netconfig "migrating switch config to new format ..."
+                       echo "$batch${N}commit network" | uci batch
+               }
+
+               exit 0
+       }

 
        mkdir -p /etc/config
 
 
        mkdir -p /etc/config
 


@@ -13,13 +47,23 @@ start() {
                        # WGT634u
                        echo boardtype=wgt634u
                else
                        # WGT634u
                        echo boardtype=wgt634u
                else

-                       strings /dev/mtdblock/3
+                       strings "$(find_mtd_part nvram)"

                fi
        ) | awk '
        function p(cfgname, name) {
                if (c[name] != "") print "      option " cfgname "      \"" c[name] "\""
        }
 
                fi
        ) | awk '
        function p(cfgname, name) {
                if (c[name] != "") print "      option " cfgname "      \"" c[name] "\""
        }
 

+       function vlan(id, name) {
+               if (c[name] != "") {
+                       print "config switch_vlan eth0_" id
+                       print " option device   \"eth0\""
+                       print " option vlan     " id
+                       print " option ports    \"" c[name] "\""
+                       print ""
+               }
+       }
+

        function macinc(mac, maca, i, result) {
                split(mac, maca, ":")
                for (i = 1; i <= 6; i++) maca[i] = "0x" maca[i]
        function macinc(mac, maca, i, result) {
                split(mac, maca, ":")
                for (i = 1; i <= 6; i++) maca[i] = "0x" maca[i]


@@ -47,20 +91,40 @@ start() {
                        mac_check = mac_check "[0-9a-fA-F][0-9a-fA-F]"
                }
        }
                        mac_check = mac_check "[0-9a-fA-F][0-9a-fA-F]"
                }
        }

-       
+

        ($1 == "boardnum") || ($1 == "boardtype") || ($1 == "boardflags") || ($1 ~ /macaddr/) {
                nvram[$1] = $2
        }
        ($1 == "boardnum") || ($1 == "boardtype") || ($1 == "boardflags") || ($1 ~ /macaddr/) {
                nvram[$1] = $2
        }

-       
+

        END {
                if ((model == "ASUS WL-HDD") || (model == "ASUS WL-300g") || (model == "Linksys WAP54G V1")) {
                        c["wan_ifname"] = ""
                        c["lan_ifname"] = "eth1"
                }
        END {
                if ((model == "ASUS WL-HDD") || (model == "ASUS WL-300g") || (model == "Linksys WAP54G V1")) {
                        c["wan_ifname"] = ""
                        c["lan_ifname"] = "eth1"
                }

+               if (model == "ASUS WL-330gE") {
+                       c["wan_ifname"] = ""
+                       c["lan_ifname"] = "eth0"
+                       c["vlan0ports"] = ""
+                       c["vlan1ports"] = ""
+               }

                if (model == "ASUS WL-500g") {
                        c["wan_ifname"] = "eth1"
                        c["lan_ifname"] = "eth0"
                }
                if (model == "ASUS WL-500g") {
                        c["wan_ifname"] = "eth1"
                        c["lan_ifname"] = "eth0"
                }

+               if (model == "ASUS WL-500g Premium V2") {
+                               c["vlan0ports"] = "0 1 2 3 5*"
+                               c["vlan1ports"] = "4 5"
+               }
+               if (model == "Dell TrueMobile 2300") {
+                       c["lan_ifname"] = "eth0"
+                       c["wan_ifname"] = "eth1"
+                       c["vlan0ports"] = "0 1 2 3 4 5u"
+                       c["vlan1ports"] = ""
+               }
+               if (model == "Dell TrueMobile 2300 v2") {
+                       c["vlan0ports"] = "0 1 2 3 5*"
+                       c["vlan1ports"] = "4 5"
+               }

                if (nvram["boardtype"] == "bcm94710r4") {
                        # Toshiba WRC-1000
                        c["lan_ifname"] = "eth0"
                if (nvram["boardtype"] == "bcm94710r4") {
                        # Toshiba WRC-1000
                        c["lan_ifname"] = "eth0"


@@ -93,6 +157,18 @@ start() {
                                }
                        }
                }
                                }
                        }
                }

+               # Buffalo WBR-B11 and Buffalo WBR-G54
+               if (nvram["boardtype"] == "bcm94710ap") {
+                       c["vlan0ports"] = "0 1 2 3 4 5u"
+                       c["vlan1ports"] = ""
+                       c["lan_ifname"] = "eth0"
+                       c["wan_ifname"] = "eth1"
+               }
+               if (nvram["boardtype"] == "0x478") {
+                       # generic broadcom 4785 processor with 5397 switch?
+                       c["vlan0ports"] = "1 2 3 4 8*"
+                       c["vlan1ports"] = "0 8"
+               }

 
                # WAP54G
                if ((nvram["boardnum"] == "2") || \
 
                # WAP54G
                if ((nvram["boardnum"] == "2") || \


@@ -100,13 +176,44 @@ start() {
                        c["lan_ifname"]="eth0"
                        c["wan_ifname"]=""
                }
                        c["lan_ifname"]="eth0"
                        c["wan_ifname"]=""
                }

-       
-               print "#### VLAN configuration "
-               print "config switch eth0"
-               p("vlan0", "vlan0ports")
-               p("vlan1", "vlan1ports")
-               print ""
-               print ""
+
+               # Sitecom WL-105b
+               if ((nvram["boardum"] == "2") && \
+                       (nvram["GemtekPmonVer"] == "1")) {
+                       c["lan_ifname"]="eth0"
+                       c["wan_ifname"]=""
+               }
+
+               # ASUS WL-700gE
+               # These are actually same as defaults above. For some reason this script applies
+               # Generic BCM94704 settings instead so we revert to proper settings here.
+               # Hopefully someone will fix this properly soon.
+               if (model == "ASUS WL-700gE") {
+                       c["lan_ifname"]="eth0.0"
+                       c["wan_ifname"]="eth0.1"
+                       c["vlan0ports"]="1 2 3 4 5*"
+                       c["vlan1ports"]="0 5"
+               }
+
+               if (model == "Motorola WR850G V2/V3") {
+                       c["vlan0ports"]="0 1 2 3 5*"
+                       c["vlan1ports"]="4 5"
+               }
+               if (model == "ASUS WL-500W") {
+                       c["lan_ifname"] = "eth0"
+                       c["wan_ifname"] = "eth1"
+                       c["vlan0ports"] = "0 1 2 3 4 5u"
+                       c["vlan1ports"] = ""
+               }
+
+               if (c["vlan0ports"] || c["vlan1ports"]) {
+                       print "#### VLAN configuration "
+                       print "config switch eth0"
+                       print " option enable   1"
+                       print ""                
+                       vlan(0, "vlan0ports")
+                       vlan(1, "vlan1ports")
+               }

                print "#### Loopback configuration"
                print "config interface loopback"
                print " option ifname   \"lo\""
                print "#### Loopback configuration"
                print "config interface loopback"
                print " option ifname   \"lo\""


@@ -125,10 +232,16 @@ start() {
                print " option netmask  255.255.255.0"
                print ""
                print ""
                print " option netmask  255.255.255.0"
                print ""
                print ""

-               print "#### WAN configuration"
-               print "config interface wan"
-               p("ifname", "wan_ifname")
-               p("macaddr", "wan_macaddr")
-               print " option proto    dhcp"
+               if (c["wan_ifname"]) {
+                       print "#### WAN configuration"
+                       print "config interface wan"
+                       p("ifname", "wan_ifname")
+                       p("macaddr", "wan_macaddr")
+                       print " option proto    dhcp"
+               } else {
+                       print "#### WAN configuration (disabled)"
+                       print "#config interface wan"
+                       print "#        option proto    dhcp"
+               }

        }' > /etc/config/network
 }
        }' > /etc/config/network
 }