projects / openwrt.git / blobdiff
? search:
summary | shortlog | log | commit | commitdiff | tree
raw | inline | side by side
kernel: change debounce logic in the gpio-buttons driver
[openwrt.git] / package / madwifi / Makefile
diff --git a/package/madwifi/Makefile b/package/madwifi/Makefile
index 943a13c..79a3b3f 100644 (file)
--- a/package/madwifi/Makefile
+++ b/package/madwifi/Makefile
@@ -4,42 +4,45 @@
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
 #
-# $Id$
 
 include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=madwifi
 
-ifneq ($(CONFIG_MADWIFI_UPSTREAM),)
-  PKG_VERSION:=0.9.4
-  PKG_RELEASE:=2
+PKG_REV:=3314
+PKG_VERSION:=r$(PKG_REV)
+PKG_RELEASE:=4
 
-  PKG_SOURCE:=madwifi-$(PKG_VERSION).tar.gz
-  PKG_SOURCE_URL:=http://downloads.sourceforge.net/madwifi/
-  PKG_MD5SUM:=399d20de8d855a59f20058857c2178ad
+PKG_SOURCE_PROTO:=svn
+PKG_SOURCE_VERSION:=$(PKG_REV)
+PKG_SOURCE_SUBDIR:=$(if $(PKG_BRANCH),$(PKG_BRANCH),madwifi-trunk)-$(PKG_VERSION)
+PKG_SOURCE_URL:=http://madwifi-project.org/svn/madwifi/$(if $(PKG_BRANCH),branches/$(PKG_BRANCH),trunk)
+PKG_SOURCE:=$(PKG_SOURCE_SUBDIR).tar.gz
 
-  PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/madwifi-$(PKG_VERSION)
+PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/$(if $(PKG_BRANCH),$(PKG_BRANCH),madwifi-trunk)-$(PKG_VERSION)
 
-  PATCH_DIR=./patches-upstream
-else
-# PKG_BRANCH:=madwifi-dfs
-  PKG_REV:=3314
-  PKG_VERSION:=r$(PKG_REV)
-  PKG_RELEASE:=2
+HAL_VERSION:=20090508
+HAL_FILE:=ath_hal-$(HAL_VERSION).tgz
+HAL_MD5SUM:=4ab7ae8bdb96c0be388c98bf8f92d5ca
 
-  PKG_SOURCE_PROTO:=svn
-  PKG_SOURCE_VERSION:=$(PKG_REV)
-  PKG_SOURCE_SUBDIR:=$(if $(PKG_BRANCH),$(PKG_BRANCH),madwifi-trunk)-$(PKG_VERSION)
-  PKG_SOURCE_URL:=http://svn.madwifi.org/madwifi/$(if $(PKG_BRANCH),branches/$(PKG_BRANCH),trunk)
-  PKG_SOURCE:=$(PKG_SOURCE_SUBDIR).tar.gz
+PKG_BUILD_DEPENDS:=wprobe
 
-  PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/$(if $(PKG_BRANCH),$(PKG_BRANCH),madwifi-trunk)-$(PKG_VERSION)
+include $(INCLUDE_DIR)/package.mk
 
-  PATCH_DIR=./patches
+ifdef CONFIG_MADWIFI_COMPRESSION
+  COMPRESSION:=1
+else
+  COMPRESSION:=0
 endif
 
-include $(INCLUDE_DIR)/package.mk
+define Download/hal
+  FILE:=$(HAL_FILE)
+  URL:=http://mirror2.openwrt.org/sources
+  MD5SUM:=$(HAL_MD5SUM)
+endef
+$(eval $(call Download,hal))
+
 
 ifneq ($(CONFIG_TARGET_atheros),)
   BUS:=AHB
@@ -49,11 +52,6 @@ else
   endif
 endif
 
-# XXX: remove this check later when we have PCI support properly detected on all targets
-ifneq ($(CONFIG_TARGET_ar7)$(CONFIG_TARGET_uml),)
-  BUS:=
-endif
-
 ifneq ($(CONFIG_CPU_MIPS32_R2),)
   ifeq ($(ARCH),mips)
     HAL_TARGET:=mips32r2-be-elf
@@ -63,10 +61,10 @@ ifneq ($(CONFIG_CPU_MIPS32_R2),)
   endif
 else
   ifeq ($(ARCH),mips)
-    HAL_TARGET:=$(if $(CONFIG_MADWIFI_UPSTREAM),mips-be-elf,mips32-be-elf)
+    HAL_TARGET:=mips32-be-elf
   endif
   ifeq ($(ARCH),mipsel)
-    HAL_TARGET:=$(if $(CONFIG_MADWIFI_UPSTREAM),mips-le-elf,mips32-le-elf)
+    HAL_TARGET:=mips32-le-elf
   endif
 endif
 ifeq ($(ARCH),i386)
@@ -81,13 +79,16 @@ endif
 ifeq ($(BOARD),iop32x)
   HAL_TARGET:=xscale-le-elf$(if $(CONFIG_EABI_SUPPORT),gnueabi)
 endif
+ifeq ($(BOARD),kirkwood)
+  HAL_TARGET:=xscale-le-elf$(if $(CONFIG_EABI_SUPPORT),gnueabi)
+endif
 ifeq ($(BOARD),orion)
   HAL_TARGET:=xscale-le-elf$(if $(CONFIG_EABI_SUPPORT),gnueabi)
 endif
 ifeq ($(ARCH),powerpc)
   HAL_TARGET:=powerpc-be-elf
 endif
-ifeq ($(BOARD),storm)
+ifeq ($(BOARD),gemini)
   HAL_TARGET:=armv4-le-elf$(if $(CONFIG_EABI_SUPPORT),gnueabi)
 endif
 ifneq ($(CONFIG_TARGET_atheros),)
@@ -110,6 +111,9 @@ ifdef CONFIG_MADWIFI_RCA_SAMPLERATE
   RATE_CONTROL:=sample
 endif
 
+ifneq ($(CONFIG_MADWIFI_SINGLE_MODULE),)
+MADWIFI_FILES:= $(PKG_BUILD_DIR)/ath_hal/ath_hal.$(LINUX_KMOD_SUFFIX)
+else
 MADWIFI_FILES:= \
        $(PKG_BUILD_DIR)/net80211/wlan.$(LINUX_KMOD_SUFFIX) \
        $(PKG_BUILD_DIR)/net80211/wlan_scan_ap.$(LINUX_KMOD_SUFFIX) \
@@ -120,9 +124,13 @@ MADWIFI_FILES:= \
        $(PKG_BUILD_DIR)/net80211/wlan_ccmp.$(LINUX_KMOD_SUFFIX) \
        $(PKG_BUILD_DIR)/net80211/wlan_tkip.$(LINUX_KMOD_SUFFIX) \
        $(PKG_BUILD_DIR)/net80211/wlan_wep.$(LINUX_KMOD_SUFFIX) \
-       $(PKG_BUILD_DIR)/net80211/wlan_xauth.$(LINUX_KMOD_SUFFIX) \
+       $(PKG_BUILD_DIR)/net80211/wlan_xauth.$(LINUX_KMOD_SUFFIX)
+endif
 
-MADWIFI_AUTOLOAD:= \
+ifneq ($(CONFIG_MADWIFI_SINGLE_MODULE),)
+  MADWIFI_AUTOLOAD:= ath_hal
+else
+  MADWIFI_AUTOLOAD:= \
        wlan \
        wlan_scan_ap \
        wlan_scan_sta \
@@ -132,7 +140,8 @@ MADWIFI_AUTOLOAD:= \
        wlan_ccmp \
        wlan_tkip \
        wlan_wep \
-       wlan_xauth \
+       wlan_xauth
+endif
 
 ifeq ($(findstring AHB,$(BUS)),AHB)
   MADWIFI_FILES+= $(PKG_BUILD_DIR)/ath/ath_ahb.$(LINUX_KMOD_SUFFIX)
@@ -143,19 +152,16 @@ ifeq ($(findstring PCI,$(BUS)),PCI)
   MADWIFI_AUTOLOAD+= ath_pci
 endif
 
-MADWIFI_APPLETS:=80211stats athchans athctrl athkey athstats wlanconfig ath_info
+MADWIFI_APPLETS:=80211stats athchans athkey athstats wlanconfig ath_info madwifi_multi
 ifdef CONFIG_MADWIFI_DEBUG
   MADWIFI_APPLETS += athdebug 80211debug
 endif
-ifndef CONFIG_MADWIFI_UPSTREAM
-  MADWIFI_APPLETS += madwifi_multi
-endif
 
 define KernelPackage/madwifi
   SUBMENU:=Wireless Drivers
   TITLE:=Driver for Atheros wireless chipsets
-  URL:=http://madwifi.org/
-  DEPENDS:=+wireless-tools @PCI_SUPPORT||TARGET_atheros @!TARGET_ar7 @!TARGET_avr32 @!TARGET_etrax @!TARGET_uml
+  URL:=http://madwifi-project.org/
+  DEPENDS:=+wireless-tools @PCI_SUPPORT||TARGET_atheros @!TARGET_avr32 @!TARGET_etrax @!TARGET_sibyte @!TARGET_cobalt @!TARGET_octeon @LINUX_2_6 @(!(TARGET_ep93xx||TARGET_pxcab)||BROKEN)
   FILES:=$(MADWIFI_FILES)
   AUTOLOAD:=$(call AutoLoad,50,$(MADWIFI_AUTOLOAD))
 endef
@@ -168,35 +174,43 @@ define KernelPackage/madwifi/config
        source "$(SOURCE)/Config.in"
 endef
 
+MADWIFI_INC = \
+       -I$(PKG_BUILD_DIR) \
+       -I$(PKG_BUILD_DIR)/include \
+       -I$(PKG_BUILD_DIR)/hal \
+       -I$(PKG_BUILD_DIR)/ath \
+       -I$(PKG_BUILD_DIR)/ath_hal \
+       -I$(PKG_BUILD_DIR)/net80211 \
+       -I$(STAGING_DIR)/usr/include/wprobe \
+       -include $(PKG_BUILD_DIR)/include/compat.h
+
 MAKE_ARGS:= \
        PATH="$(TARGET_PATH)" \
        ARCH="$(LINUX_KARCH)" \
+       ARCH-y="$(LINUX_KARCH)" \
        CROSS_COMPILE="$(TARGET_CROSS)" \
        TARGET="$(HAL_TARGET)" \
        TOOLPREFIX="$(KERNEL_CROSS)" \
        TOOLPATH="$(KERNEL_CROSS)" \
        KERNELPATH="$(LINUX_DIR)" \
        LDOPTS="--no-warn-mismatch " \
-       ATH_RATE="ath_rate/$(RATE_CONTROL)" \
+       ATH_RATE="$(RATE_CONTROL)" \
+       ATH_CAP_SUPERG_COMP="$(COMPRESSION)" \
        DO_MULTI=1 \
+       SINGLE_MODULE=$(if $(CONFIG_MADWIFI_SINGLE_MODULE),1) \
+       INCS="$(MADWIFI_INC)" \
        $(if $(CONFIG_MADWIFI_DEBUG),,DEBUG=) WARNINGS="-Wno-unused"
 
 MAKE_VARS:= \
-       COPTS="-DCONFIG_ATHEROS_RATE_DEFAULT='\"$(RATE_CONTROL)\"' -DATH_REVERSE_ENGINEERING=1" \
+       COPTS="-DATH_REVERSE_ENGINEERING=1" \
 
-ifeq ($(CONFIG_MADWIFI_UPSTREAM),)
-  HALFILE:=$(lastword $(sort $(wildcard ./ath_hal-*.tgz)))
-endif
-
-ifneq ($(HALFILE),)
-  define Build/Prepare/HAL
+define Build/Prepare/HAL
        rm -rf $(PKG_BUILD_DIR)/tmp
        mkdir -p $(PKG_BUILD_DIR)/tmp
-       tar xvzf $(HALFILE) -C $(PKG_BUILD_DIR)/tmp
+       tar xvzf $(DL_DIR)/$(HAL_FILE) -C $(PKG_BUILD_DIR)/tmp
        $(CP) $(PKG_BUILD_DIR)/tmp/ath_hal*/* $(PKG_BUILD_DIR)/hal/
        rm -rf $(PKG_BUILD_DIR)/tmp
-  endef
-endif
+endef
 
 define Build/Prepare
        $(call Build/Prepare/Default)
@@ -205,6 +219,7 @@ define Build/Prepare
        $(SED) 's, -E[LB],,' \
                -e 's, -mips2,,' \
                -e 's, -mapcs-32,,' \
+               -e 's, -mlong-calls,,' \
                $(PKG_BUILD_DIR)/hal/public/*.inc
        $(SED) 's,march=armv4,march=armv5te,' \
                $(PKG_BUILD_DIR)/hal/public/xscale*.inc
Personal OpenWRT clone
This page took 0.034029 seconds and 4 git commands to generate.