- MAINTAINERS | 7 +
- Makefile | 2 +-
- arch/avr32/Kconfig | 7 +
- arch/avr32/Makefile | 1 +
- arch/avr32/boards/atngw100/Kconfig | 12 +
- arch/avr32/boards/atngw100/flash.c | 5 +-
- arch/avr32/boards/atngw100/setup.c | 26 +-
- arch/avr32/boards/atstk1000/Kconfig | 12 +
- arch/avr32/boards/atstk1000/atstk1002.c | 72 ++
- arch/avr32/boards/atstk1000/flash.c | 5 +-
- arch/avr32/configs/atngw100_defconfig | 201 +++-
- arch/avr32/configs/atstk1002_defconfig | 354 +++++-
- arch/avr32/drivers/Makefile | 1 +
- arch/avr32/drivers/dw-dmac.c | 761 ++++++++++++
- arch/avr32/drivers/dw-dmac.h | 42 +
- arch/avr32/kernel/Makefile | 6 +-
- arch/avr32/kernel/dma-controller.c | 34 +
- arch/avr32/kernel/entry-avr32b.S | 26 +-
- arch/avr32/kernel/setup.c | 2 +-
- arch/avr32/kernel/vmlinux.lds.S | 143 +++
- arch/avr32/kernel/vmlinux.lds.c | 142 ---
- arch/avr32/mach-at32ap/Kconfig | 7 +
- arch/avr32/mach-at32ap/Makefile | 1 +
- arch/avr32/mach-at32ap/at32ap7000.c | 241 ++++-
- arch/avr32/mach-at32ap/clock.c | 116 ++
- arch/avr32/mach-at32ap/gpio-dev.c | 573 +++++++++
- arch/avr32/mach-at32ap/hsmc.c | 129 ++-
- arch/avr32/mach-at32ap/pio.c | 80 ++
- arch/avr32/mach-at32ap/pm.h | 8 +
- arch/avr32/mm/dma-coherent.c | 7 +
- arch/avr32/mm/init.c | 12 +-
- drivers/i2c/busses/Kconfig | 8 +
- drivers/i2c/busses/Makefile | 1 +
- drivers/i2c/busses/i2c-atmeltwi.c | 436 +++++++
- drivers/i2c/busses/i2c-atmeltwi.h | 117 ++
- drivers/misc/Kconfig | 9 +
- drivers/misc/Makefile | 1 +
- drivers/misc/atmel-ssc.c | 174 +++
- drivers/mmc/host/Kconfig | 10 +
- drivers/mmc/host/Makefile | 1 +
- drivers/mmc/host/atmel-mci.c | 1161 ++++++++++++++++++
- drivers/mmc/host/atmel-mci.h | 192 +++
- drivers/mtd/chips/cfi_cmdset_0001.c | 43 +
- drivers/mtd/chips/cfi_cmdset_0002.c | 6 +-
- drivers/spi/atmel_spi.c | 4 +-
- drivers/usb/gadget/Kconfig | 26 +-
- drivers/usb/gadget/Makefile | 1 +
- drivers/usb/gadget/atmel_usba_udc.c | 2038 +++++++++++++++++++++++++++++++
- drivers/usb/gadget/atmel_usba_udc.h | 350 ++++++
- drivers/video/atmel_lcdfb.c | 6 +-
- drivers/video/backlight/Kconfig | 12 +
- drivers/video/backlight/Makefile | 2 +
- drivers/video/backlight/ltv350qv.c | 339 +++++
- drivers/video/backlight/ltv350qv.h | 95 ++
- include/asm-avr32/arch-at32ap/board.h | 20 +
- include/asm-avr32/arch-at32ap/portmux.h | 13 +
- include/asm-avr32/arch-at32ap/smc.h | 51 +-
- include/asm-avr32/dma-controller.h | 166 +++
- include/asm-avr32/dma-mapping.h | 17 +-
- include/asm-avr32/system.h | 13 +-
- include/asm-avr32/unistd.h | 13 +
- include/linux/atmel-ssc.h | 312 +++++
- include/linux/spi/at73c213.h | 25 +
- scripts/checkstack.pl | 5 +
- sound/Kconfig | 6 +
- sound/Makefile | 3 +-
- sound/avr32/Kconfig | 11 +
- sound/avr32/Makefile | 3 +
- sound/avr32/ac97c.c | 914 ++++++++++++++
- sound/avr32/ac97c.h | 71 ++
- sound/oss/Kconfig | 4 +
- sound/oss/Makefile | 1 +
- sound/oss/at32_abdac.c | 722 +++++++++++
- sound/oss/at32_abdac.h | 59 +
- sound/spi/Kconfig | 31 +
- sound/spi/Makefile | 5 +
- sound/spi/at73c213.c | 1121 +++++++++++++++++
- sound/spi/at73c213.h | 119 ++
- 78 files changed, 11500 insertions(+), 272 deletions(-)
- create mode 100644 arch/avr32/boards/atngw100/Kconfig
- create mode 100644 arch/avr32/drivers/Makefile
- create mode 100644 arch/avr32/drivers/dw-dmac.c
- create mode 100644 arch/avr32/drivers/dw-dmac.h
- create mode 100644 arch/avr32/kernel/dma-controller.c
- create mode 100644 arch/avr32/kernel/vmlinux.lds.S
- delete mode 100644 arch/avr32/kernel/vmlinux.lds.c
- create mode 100644 arch/avr32/mach-at32ap/gpio-dev.c
- create mode 100644 drivers/i2c/busses/i2c-atmeltwi.c
- create mode 100644 drivers/i2c/busses/i2c-atmeltwi.h
- create mode 100644 drivers/misc/atmel-ssc.c
- create mode 100644 drivers/mmc/host/atmel-mci.c
- create mode 100644 drivers/mmc/host/atmel-mci.h
- create mode 100644 drivers/usb/gadget/atmel_usba_udc.c
- create mode 100644 drivers/usb/gadget/atmel_usba_udc.h
- create mode 100644 drivers/video/backlight/ltv350qv.c
- create mode 100644 drivers/video/backlight/ltv350qv.h
- create mode 100644 include/asm-avr32/dma-controller.h
- create mode 100644 include/linux/atmel-ssc.h
- create mode 100644 include/linux/spi/at73c213.h
- create mode 100644 sound/avr32/Kconfig
- create mode 100644 sound/avr32/Makefile
- create mode 100644 sound/avr32/ac97c.c
- create mode 100644 sound/avr32/ac97c.h
- create mode 100644 sound/oss/at32_abdac.c
- create mode 100644 sound/oss/at32_abdac.h
- create mode 100644 sound/spi/Kconfig
- create mode 100644 sound/spi/Makefile
- create mode 100644 sound/spi/at73c213.c
- create mode 100644 sound/spi/at73c213.h
-
-diff --git a/MAINTAINERS b/MAINTAINERS
-index 9a91d9e..587afe3 100644
---- a/MAINTAINERS
-+++ b/MAINTAINERS
-@@ -669,6 +669,13 @@ P: Haavard Skinnemoen
- M: hskinnemoen@atmel.com
- S: Supported
-
-+ATMEL USBA UDC DRIVER
-+P: Haavard Skinnemoen
-+M: hskinnemoen@atmel.com
-+L: kernel@avr32linux.org
-+W: http://avr32linux.org/twiki/bin/view/Main/AtmelUsbDeviceDriver
-+S: Supported
-+
- ATMEL WIRELESS DRIVER
- P: Simon Kelley
- M: simon@thekelleys.org.uk
-diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig
-index d12346a..ec6c7c5 100644
+--- a/Documentation/serial/driver
++++ b/Documentation/serial/driver
+@@ -186,6 +186,17 @@ hardware.
+ Locking: port_sem taken.
+ Interrupts: caller dependent.
+
++ flush_buffer(port)
++ Flush any write buffers, reset any DMA state and stop any
++ ongoing DMA transfers.
++
++ This will be called whenever the port->info->xmit circular
++ buffer is cleared.
++
++ Locking: port->lock taken.
++ Interrupts: locally disabled.
++ This call must not sleep
++
+ set_termios(port,termios,oldtermios)
+ Change the port parameters, including word length, parity, stop
+ bits. Update read_status_mask and ignore_status_mask to indicate
--- a/arch/avr32/Kconfig
+++ b/arch/avr32/Kconfig
-@@ -116,6 +116,9 @@ endchoice
+@@ -47,6 +47,9 @@ config RWSEM_GENERIC_SPINLOCK
+ config GENERIC_TIME
+ def_bool y
+
++config GENERIC_CLOCKEVENTS
++ def_bool y
++
+ config RWSEM_XCHGADD_ALGORITHM
+ def_bool n
+
+@@ -70,6 +73,8 @@ source "init/Kconfig"
+
+ menu "System Type and features"
+
++source "kernel/time/Kconfig"
++
+ config SUBARCH_AVR32B
+ bool
+ config MMU
+@@ -83,6 +88,7 @@ config PLATFORM_AT32AP
+ select MMU
+ select PERFORMANCE_COUNTERS
+ select HAVE_GPIO_LIB
++ select GENERIC_ALLOCATOR
+
+ #
+ # CPU types
+@@ -117,6 +123,9 @@ endchoice
if BOARD_ATSTK1000
source "arch/avr32/boards/atstk1000/Kconfig"
endif
choice
prompt "Boot loader type"
-@@ -175,6 +178,10 @@ config OWNERSHIP_TRACE
- enabling Nexus-compliant debuggers to keep track of the PID of the
- currently executing task.
+@@ -142,6 +151,9 @@ config PHYS_OFFSET
+
+ source "kernel/Kconfig.preempt"
+
++config QUICKLIST
++ def_bool y
++
+ config HAVE_ARCH_BOOTMEM_NODE
+ def_bool n
+
+@@ -180,6 +192,10 @@ config NMI_DEBUGGING
+ be dumped to the console when a Non-Maskable Interrupt
+ happens.
+config DW_DMAC
+ tristate "Synopsys DesignWare DMA Controller support"
# FPU emulation goes here
source "kernel/Kconfig.hz"
-diff --git a/arch/avr32/Makefile b/arch/avr32/Makefile
-index dc6bc01..eb72198 100644
+@@ -196,6 +212,11 @@ endmenu
+
+ menu "Power management options"
+
++config ARCH_SUSPEND_POSSIBLE
++ def_bool y
++
++source "kernel/power/Kconfig"
++
+ menu "CPU Frequency scaling"
+
+ source "drivers/cpufreq/Kconfig"
--- a/arch/avr32/Makefile
+++ b/arch/avr32/Makefile
-@@ -31,6 +31,7 @@ core-$(CONFIG_BOARD_ATNGW100) += arch/avr32/boards/atngw100/
- core-$(CONFIG_LOADER_U_BOOT) += arch/avr32/boot/u-boot/
+@@ -32,6 +32,7 @@ core-$(CONFIG_LOADER_U_BOOT) += arch/av
core-y += arch/avr32/kernel/
core-y += arch/avr32/mm/
+ drivers-$(CONFIG_OPROFILE) += arch/avr32/oprofile/
+drivers-y += arch/avr32/drivers/
libs-y += arch/avr32/lib/
archincdir-$(CONFIG_PLATFORM_AT32AP) := arch-at32ap
-diff --git a/arch/avr32/boards/atngw100/Kconfig b/arch/avr32/boards/atngw100/Kconfig
-new file mode 100644
-index 0000000..5d922df
--- /dev/null
+++ b/arch/avr32/boards/atngw100/Kconfig
@@ -0,0 +1,12 @@
+
+ Choose 'Y' here if you're having i2c-related problems and
+ want to rule out the i2c bus driver.
-diff --git a/arch/avr32/boards/atngw100/flash.c b/arch/avr32/boards/atngw100/flash.c
-index f9b32a8..b07ae63 100644
---- a/arch/avr32/boards/atngw100/flash.c
-+++ b/arch/avr32/boards/atngw100/flash.c
-@@ -15,7 +15,7 @@
-
- #include <asm/arch/smc.h>
-
--static struct smc_config flash_config __initdata = {
-+static struct smc_timing flash_timing __initdata = {
- .ncs_read_setup = 0,
- .nrd_setup = 40,
- .ncs_write_setup = 0,
-@@ -28,7 +28,9 @@ static struct smc_config flash_config __initdata = {
-
- .read_cycle = 120,
- .write_cycle = 120,
-+};
-
-+static struct smc_config flash_config __initdata = {
- .bus_width = 2,
- .nrd_controlled = 1,
- .nwe_controlled = 1,
-@@ -82,6 +84,7 @@ static int __init atngw100_flash_init(void)
- {
- int ret;
-
-+ smc_set_timing(&flash_config, &flash_timing);
- ret = smc_set_configuration(0, &flash_config);
- if (ret < 0) {
- printk(KERN_ERR "atngw100: failed to set NOR flash timing\n");
-diff --git a/arch/avr32/boards/atngw100/setup.c b/arch/avr32/boards/atngw100/setup.c
-index ef80156..2a5f587 100644
--- a/arch/avr32/boards/atngw100/setup.c
+++ b/arch/avr32/boards/atngw100/setup.c
-@@ -42,6 +42,11 @@ static struct spi_board_info spi0_board_info[] __initdata = {
+@@ -25,6 +25,13 @@
+ #include <asm/arch/init.h>
+ #include <asm/arch/portmux.h>
+
++/* Oscillator frequencies. These are board-specific */
++unsigned long at32_board_osc_rates[3] = {
++ [0] = 32768, /* 32.768 kHz on RTC osc */
++ [1] = 20000000, /* 20 MHz on osc0 */
++ [2] = 12000000, /* 12 MHz on osc1 */
++};
++
+ /* Initialized by bootloader-specific startup code. */
+ struct tag *bootloader_tags __initdata;
+
+@@ -37,11 +44,16 @@ static struct eth_platform_data __initda
+ static struct spi_board_info spi0_board_info[] __initdata = {
+ {
+ .modalias = "mtd_dataflash",
+- .max_speed_hz = 10000000,
++ .max_speed_hz = 8000000,
+ .chip_select = 0,
},
};
/*
* The next two functions should go away as the boot loader is
* supposed to initialize the macb address registers with a valid
-@@ -124,9 +129,13 @@ static struct platform_device ngw_gpio_leds = {
+@@ -124,6 +136,7 @@ static struct platform_device ngw_gpio_l
}
};
+#ifdef CONFIG_BOARD_ATNGW100_I2C_GPIO
static struct i2c_gpio_platform_data i2c_gpio_data = {
-- .sda_pin = GPIO_PIN_PA(6),
-- .scl_pin = GPIO_PIN_PA(7),
-+ .sda_pin = GPIO_PIN_PA(6),
-+ .scl_pin = GPIO_PIN_PA(7),
-+ .sda_is_open_drain = 1,
-+ .scl_is_open_drain = 1,
-+ .udelay = 2, /* close to 100 kHz */
- };
-
- static struct platform_device i2c_gpio_device = {
-@@ -136,6 +145,7 @@ static struct platform_device i2c_gpio_device = {
+ .sda_pin = GPIO_PIN_PA(6),
+ .scl_pin = GPIO_PIN_PA(7),
+@@ -139,6 +152,7 @@ static struct platform_device i2c_gpio_d
.platform_data = &i2c_gpio_data,
},
};
static int __init atngw100_init(void)
{
-@@ -154,6 +164,8 @@ static int __init atngw100_init(void)
+@@ -157,6 +171,7 @@ static int __init atngw100_init(void)
set_hw_addr(at32_add_device_eth(1, ð_data[1]));
at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
+ at32_add_device_mci(0, &mci0_data);
-+ at32_add_device_usba(0, NULL);
+ at32_add_device_usba(0, NULL);
for (i = 0; i < ARRAY_SIZE(ngw_leds); i++) {
- at32_select_gpio(ngw_leds[i].gpio,
-@@ -161,9 +173,15 @@ static int __init atngw100_init(void)
+@@ -165,11 +180,15 @@ static int __init atngw100_init(void)
}
platform_device_register(&ngw_gpio_leds);
-- at32_select_gpio(i2c_gpio_data.sda_pin, 0);
-- at32_select_gpio(i2c_gpio_data.scl_pin, 0);
+#ifdef CONFIG_BOARD_ATNGW100_I2C_GPIO
-+ at32_select_gpio(i2c_gpio_data.sda_pin,
-+ AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
-+ at32_select_gpio(i2c_gpio_data.scl_pin,
-+ AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
+ at32_select_gpio(i2c_gpio_data.sda_pin,
+ AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
+ at32_select_gpio(i2c_gpio_data.scl_pin,
+ AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
platform_device_register(&i2c_gpio_device);
+#else
-+ at32_add_device_twi(0);
++ at32_add_device_twi(0, NULL, 0);
+#endif
return 0;
}
-diff --git a/arch/avr32/boards/atstk1000/Kconfig b/arch/avr32/boards/atstk1000/Kconfig
-index 718578f..b1f5a62 100644
--- a/arch/avr32/boards/atstk1000/Kconfig
+++ b/arch/avr32/boards/atstk1000/Kconfig
-@@ -76,4 +76,16 @@ config BOARD_ATSTK1002_J2_RGB
+@@ -18,6 +18,10 @@ config BOARD_ATSTK1004
+ bool "ATSTK1004"
+ select CPU_AT32AP7002
++config BOARD_ATSTK1006
++ bool "ATSTK1006"
++ select CPU_AT32AP7000
++
endchoice
-+config BOARD_ATSTK1002_ENABLE_AC97
+
+@@ -102,4 +106,60 @@ config BOARD_ATSTK1000_EXTDAC
+ depends on !BOARD_ATSTK100X_SW1_CUSTOM && !BOARD_ATSTK100X_SW3_CUSTOM
+ default y
+
++config BOARD_ATSTK100X_ENABLE_AC97
+ bool "Use AC97C instead of ABDAC"
+ help
+ Select this if you want to use the built-in AC97 controller
+ the same I/O pins on the AP7000, so both can't be enabled
+ at the same time.
+
-+ Note that the STK1000/STK1002 kit doesn't ship with an AC97
-+ codec on board, so say N unless you've got an expansion
-+ board with an AC97 codec on it that you want to use.
++ Note that the STK1000 kit doesn't ship with an AC97 codec on
++ board, so say N unless you've got an expansion board with an
++ AC97 codec on it that you want to use.
++
++config BOARD_ATSTK1000_CF_HACKS
++ bool "ATSTK1000 CompactFlash hacks"
++ depends on !BOARD_ATSTK100X_SW4_CUSTOM
++ help
++ Select this if you have re-routed the CompactFlash RESET and
++ CD signals to GPIOs on your STK1000. This is necessary for
++ reset and card detection to work properly, although some CF
++ cards may be able to cope without reset.
++
++config BOARD_ATSTK1000_CF_RESET_PIN
++ hex "CompactFlash RESET pin"
++ default 0x30
++ depends on BOARD_ATSTK1000_CF_HACKS
++ help
++ Select which GPIO pin to use for the CompactFlash RESET
++ signal. This is specified as a hexadecimal number and should
++ be defined as 0x20 * gpio_port + pin.
++
++ The default is 0x30, which is pin 16 on PIOB, aka GPIO14.
+
- endif # stk 1002
-diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c
-index c9981b7..f7fb509 100644
++config BOARD_ATSTK1000_CF_DETECT_PIN
++ hex "CompactFlash DETECT pin"
++ default 0x3e
++ depends on BOARD_ATSTK1000_CF_HACKS
++ help
++ Select which GPIO pin to use for the CompactFlash CD
++ signal. This is specified as a hexadecimal number and should
++ be defined as 0x20 * gpio_port + pin.
++
++ The default is 0x3e, which is pin 30 on PIOB, aka GPIO15.
++
++config BOARD_ATSTK100X_ENABLE_PSIF
++ bool "Enable PSIF peripheral (PS/2 support)"
++ default n
++ help
++ Select this if you want to use the PSIF peripheral to hook up PS/2
++ devices to your STK1000. This will require a hardware modification to
++ work correctly, since PS/2 devices require 5 volt power and signals,
++ while the STK1000 only provides 3.3 volt.
++
++ Say N if you have not modified the hardware to boost the voltage, say
++ Y if you have level convertion hardware or a PS/2 device capable of
++ operating on 3.3 volt.
++
+ endif # stk 1000
+--- a/arch/avr32/boards/atstk1000/Makefile
++++ b/arch/avr32/boards/atstk1000/Makefile
+@@ -2,3 +2,4 @@ obj-y += setup.o flash.o
+ obj-$(CONFIG_BOARD_ATSTK1002) += atstk1002.o
+ obj-$(CONFIG_BOARD_ATSTK1003) += atstk1003.o
+ obj-$(CONFIG_BOARD_ATSTK1004) += atstk1004.o
++obj-$(CONFIG_BOARD_ATSTK1006) += atstk1002.o
--- a/arch/avr32/boards/atstk1000/atstk1002.c
+++ b/arch/avr32/boards/atstk1000/atstk1002.c
-@@ -16,6 +16,7 @@
- #include <linux/string.h>
- #include <linux/types.h>
- #include <linux/spi/spi.h>
-+#include <linux/spi/at73c213.h>
-
- #include <video/atmel_lcdc.h>
+@@ -1,7 +1,7 @@
+ /*
+- * ATSTK1002 daughterboard-specific init code
++ * ATSTK1002/ATSTK1006 daughterboard-specific init code
+ *
+- * Copyright (C) 2005-2006 Atmel Corporation
++ * Copyright (C) 2005-2007 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+@@ -28,6 +28,80 @@
-@@ -49,7 +50,25 @@ static struct eth_platform_data __initdata eth_data[2] = {
- };
+ #include "atstk1000.h"
- #ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM
-+#ifndef CONFIG_BOARD_ATSTK1002_SW3_CUSTOM
-+static struct at73c213_board_info at73c213_data = {
-+ .ssc_id = 0,
-+ .shortname = "AVR32 STK1000 external DAC",
++/* Oscillator frequencies. These are board specific */
++unsigned long at32_board_osc_rates[3] = {
++ [0] = 32768, /* 32.768 kHz on RTC osc */
++ [1] = 20000000, /* 20 MHz on osc0 */
++ [2] = 12000000, /* 12 MHz on osc1 */
+};
-+#endif
-+#endif
-+#ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM
- static struct spi_board_info spi0_board_info[] __initdata = {
-+#ifndef CONFIG_BOARD_ATSTK1002_SW3_CUSTOM
++
++/*
++ * The ATSTK1006 daughterboard is very similar to the ATSTK1002. Both
++ * have the AT32AP7000 chip on board; the difference is that the
++ * STK1006 has 128 MB SDRAM (the STK1002 uses the 8 MB SDRAM chip on
++ * the STK1000 motherboard) and 256 MB NAND flash (the STK1002 has
++ * none.)
++ *
++ * The RAM difference is handled by the boot loader, so the only
++ * difference we end up handling here is the NAND flash.
++ */
++#ifdef CONFIG_BOARD_ATSTK1006
++#include <linux/mtd/partitions.h>
++#include <asm/arch/smc.h>
++
++static struct smc_timing nand_timing __initdata = {
++ .ncs_read_setup = 0,
++ .nrd_setup = 10,
++ .ncs_write_setup = 0,
++ .nwe_setup = 10,
++
++ .ncs_read_pulse = 30,
++ .nrd_pulse = 15,
++ .ncs_write_pulse = 30,
++ .nwe_pulse = 15,
++
++ .read_cycle = 30,
++ .write_cycle = 30,
++
++ .ncs_read_recover = 0,
++ .nrd_recover = 15,
++ .ncs_write_recover = 0,
++ /* WE# high -> RE# low min 60 ns */
++ .nwe_recover = 50,
++};
++
++static struct smc_config nand_config __initdata = {
++ .bus_width = 1,
++ .nrd_controlled = 1,
++ .nwe_controlled = 1,
++ .nwait_mode = 0,
++ .byte_write = 0,
++ .tdf_cycles = 2,
++ .tdf_mode = 0,
++};
++
++static struct mtd_partition nand_partitions[] = {
+ {
-+ /* AT73C213 */
-+ .modalias = "at73c213",
-+ .max_speed_hz = 200000,
-+ .chip_select = 0,
-+ .mode = SPI_MODE_1,
-+ .platform_data = &at73c213_data,
++ .name = "main",
++ .offset = 0x00000000,
++ .size = MTDPART_SIZ_FULL,
+ },
++};
++
++static struct mtd_partition *nand_part_info(int size, int *num_partitions)
++{
++ *num_partitions = ARRAY_SIZE(nand_partitions);
++ return nand_partitions;
++}
++
++static struct atmel_nand_data atstk1006_nand_data __initdata = {
++ .cle = 21,
++ .ale = 22,
++ .rdy_pin = GPIO_PIN_PB(30),
++ .enable_pin = GPIO_PIN_PB(29),
++ .partition_info = nand_part_info,
++};
+#endif
- {
- /* QVGA display */
- .modalias = "ltv350qv",
-@@ -66,6 +85,11 @@ static struct spi_board_info spi1_board_info[] __initdata = { {
+
+ struct eth_addr {
+ u8 addr[6];
+@@ -83,6 +157,19 @@ static struct spi_board_info spi1_board_
} };
#endif
-+static struct mci_platform_data __initdata mci0_data = {
++static struct cf_platform_data __initdata cf0_data = {
++#ifdef CONFIG_BOARD_ATSTK1000_CF_HACKS
++ .detect_pin = CONFIG_BOARD_ATSTK1000_CF_DETECT_PIN,
++ .reset_pin = CONFIG_BOARD_ATSTK1000_CF_RESET_PIN,
++#else
+ .detect_pin = GPIO_PIN_NONE,
-+ .wp_pin = GPIO_PIN_NONE,
++ .reset_pin = GPIO_PIN_NONE,
++#endif
++ .vcc_pin = GPIO_PIN_NONE,
++ .ready_pin = GPIO_PIN_PB(27),
++ .cs = 4,
+};
+
/*
* The next two functions should go away as the boot loader is
* supposed to initialize the macb address registers with a valid
-@@ -180,6 +204,38 @@ static void setup_j2_leds(void)
- }
- #endif
+@@ -212,6 +299,12 @@ static int __init atstk1002_init(void)
-+#ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM
-+#ifndef CONFIG_BOARD_ATSTK1002_SW3_CUSTOM
-+static void __init at73c213_set_clk(struct at73c213_board_info *info)
-+{
-+ struct clk *gclk;
-+ struct clk *pll;
-+
-+ gclk = clk_get(NULL, "gclk0");
-+ if (IS_ERR(gclk))
-+ goto err_gclk;
-+ pll = clk_get(NULL, "pll0");
-+ if (IS_ERR(pll))
-+ goto err_pll;
-+
-+ if (clk_set_parent(gclk, pll)) {
-+ pr_debug("STK1000: failed to set pll0 as parent for DAC clock\n");
-+ goto err_set_clk;
-+ }
-+
-+ at32_select_periph(GPIO_PIN_PA(30), GPIO_PERIPH_A, 0);
-+ info->dac_clk = gclk;
-+
-+err_set_clk:
-+ clk_put(pll);
-+err_pll:
-+ clk_put(gclk);
-+err_gclk:
-+ return;
-+}
-+#endif
+ at32_add_system_devices();
+
++#ifdef CONFIG_BOARD_ATSTK1006
++ smc_set_timing(&nand_config, &nand_timing);
++ smc_set_configuration(3, &nand_config);
++ at32_add_device_nand(0, &atstk1006_nand_data);
+#endif
+
- void __init setup_board(void)
- {
- #ifdef CONFIG_BOARD_ATSTK1002_SW2_CUSTOM
-@@ -235,18 +291,34 @@ static int __init atstk1002_init(void)
- #ifdef CONFIG_BOARD_ATSTK1002_SPI1
+ #ifdef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
+ at32_add_device_usart(1);
+ #else
+@@ -228,16 +321,30 @@ static int __init atstk1002_init(void)
+ #ifdef CONFIG_BOARD_ATSTK100X_SPI1
at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
#endif
-+ at32_add_device_twi(0);
-+#ifndef CONFIG_BOARD_ATSTK1002_SW2_CUSTOM
-+ at32_add_device_mci(0, &mci0_data);
++ at32_add_device_twi(0, NULL, 0);
++#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
++ at32_add_device_mci(0, NULL);
+#endif
#ifdef CONFIG_BOARD_ATSTK1002_SW5_CUSTOM
set_hw_addr(at32_add_device_eth(1, ð_data[1]));
#else
at32_add_device_lcdc(0, &atstk1000_lcdc_data,
- fbmem_start, fbmem_size);
+- fbmem_start, fbmem_size);
++ fbmem_start, fbmem_size, 0);
#endif
-+ at32_add_device_usba(0, NULL);
-+#ifdef CONFIG_BOARD_ATSTK1002_ENABLE_AC97
-+ at32_add_device_ac97c(0);
+ at32_add_device_usba(0, NULL);
++#ifdef CONFIG_BOARD_ATSTK100X_ENABLE_AC97
++ at32_add_device_ac97c(0, NULL);
+#else
+ at32_add_device_abdac(0);
+#endif
- #ifndef CONFIG_BOARD_ATSTK1002_SW3_CUSTOM
+ #ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM
at32_add_device_ssc(0, ATMEL_SSC_TX);
#endif
++ at32_add_device_cf(0, 2, &cf0_data);
++#ifdef CONFIG_BOARD_ATSTK100X_ENABLE_PSIF
++ at32_add_device_psif(0);
++ at32_add_device_psif(1);
++#endif
- setup_j2_leds();
+ atstk1000_setup_j2_leds();
+ atstk1002_setup_extdac();
+--- a/arch/avr32/boards/atstk1000/atstk1003.c
++++ b/arch/avr32/boards/atstk1000/atstk1003.c
+@@ -27,6 +27,13 @@
-+#ifndef CONFIG_BOARD_ATSTK1002_SW3_CUSTOM
-+#ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM
-+ at73c213_set_clk(&at73c213_data);
-+#endif
-+#endif
-+
- return 0;
- }
- postcore_initcall(atstk1002_init);
-diff --git a/arch/avr32/boards/atstk1000/flash.c b/arch/avr32/boards/atstk1000/flash.c
-index aac4300..3d0a102 100644
---- a/arch/avr32/boards/atstk1000/flash.c
-+++ b/arch/avr32/boards/atstk1000/flash.c
-@@ -15,7 +15,7 @@
-
- #include <asm/arch/smc.h>
-
--static struct smc_config flash_config __initdata = {
-+static struct smc_timing flash_timing __initdata = {
- .ncs_read_setup = 0,
- .nrd_setup = 40,
- .ncs_write_setup = 0,
-@@ -28,7 +28,9 @@ static struct smc_config flash_config __initdata = {
-
- .read_cycle = 120,
- .write_cycle = 120,
+ #include "atstk1000.h"
+
++/* Oscillator frequencies. These are board specific */
++unsigned long at32_board_osc_rates[3] = {
++ [0] = 32768, /* 32.768 kHz on RTC osc */
++ [1] = 20000000, /* 20 MHz on osc0 */
++ [2] = 12000000, /* 12 MHz on osc1 */
+};
++
+ #ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
+ static struct at73c213_board_info at73c213_data = {
+ .ssc_id = 0,
+@@ -59,6 +66,19 @@ static struct spi_board_info spi1_board_
+ } };
+ #endif
-+static struct smc_config flash_config __initdata = {
- .bus_width = 2,
- .nrd_controlled = 1,
- .nwe_controlled = 1,
-@@ -82,6 +84,7 @@ static int __init atstk1000_flash_init(void)
++static struct cf_platform_data __initdata cf0_data = {
++#ifdef CONFIG_BOARD_ATSTK1000_CF_HACKS
++ .detect_pin = CONFIG_BOARD_ATSTK1000_CF_DETECT_PIN,
++ .reset_pin = CONFIG_BOARD_ATSTK1000_CF_RESET_PIN,
++#else
++ .detect_pin = GPIO_PIN_NONE,
++ .reset_pin = GPIO_PIN_NONE,
++#endif
++ .vcc_pin = GPIO_PIN_NONE,
++ .ready_pin = GPIO_PIN_PB(27),
++ .cs = 4,
++};
++
+ #ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
+ static void __init atstk1003_setup_extdac(void)
{
- int ret;
+@@ -147,12 +167,22 @@ static int __init atstk1003_init(void)
+ at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
+ #endif
+ #ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
+- at32_add_device_mci(0);
++ at32_add_device_mci(0, NULL);
+ #endif
+ at32_add_device_usba(0, NULL);
++#ifdef CONFIG_BOARD_ATSTK100X_ENABLE_AC97
++ at32_add_device_ac97c(0, NULL);
++#else
++ at32_add_device_abdac(0);
++#endif
+ #ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM
+ at32_add_device_ssc(0, ATMEL_SSC_TX);
+ #endif
++ at32_add_device_cf(0, 2, &cf0_data);
++#ifdef CONFIG_BOARD_ATSTK100X_ENABLE_PSIF
++ at32_add_device_psif(0);
++ at32_add_device_psif(1);
++#endif
+
+ atstk1000_setup_j2_leds();
+ atstk1003_setup_extdac();
+--- a/arch/avr32/boards/atstk1000/atstk1004.c
++++ b/arch/avr32/boards/atstk1000/atstk1004.c
+@@ -29,6 +29,13 @@
+
+ #include "atstk1000.h"
+
++/* Oscillator frequencies. These are board specific */
++unsigned long at32_board_osc_rates[3] = {
++ [0] = 32768, /* 32.768 kHz on RTC osc */
++ [1] = 20000000, /* 20 MHz on osc0 */
++ [2] = 12000000, /* 12 MHz on osc1 */
++};
++
+ #ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
+ static struct at73c213_board_info at73c213_data = {
+ .ssc_id = 0,
+@@ -130,14 +137,23 @@ static int __init atstk1004_init(void)
+ at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
+ #endif
+ #ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
+- at32_add_device_mci(0);
++ at32_add_device_mci(0, NULL);
+ #endif
+ at32_add_device_lcdc(0, &atstk1000_lcdc_data,
+- fbmem_start, fbmem_size);
++ fbmem_start, fbmem_size, 0);
+ at32_add_device_usba(0, NULL);
++#ifdef CONFIG_BOARD_ATSTK100X_ENABLE_AC97
++ at32_add_device_ac97c(0, NULL);
++#else
++ at32_add_device_abdac(0);
++#endif
+ #ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM
+ at32_add_device_ssc(0, ATMEL_SSC_TX);
+ #endif
++#ifdef CONFIG_BOARD_ATSTK100X_ENABLE_PSIF
++ at32_add_device_psif(0);
++ at32_add_device_psif(1);
++#endif
-+ smc_set_timing(&flash_config, &flash_timing);
- ret = smc_set_configuration(0, &flash_config);
- if (ret < 0) {
- printk(KERN_ERR "atstk1000: failed to set NOR flash timing\n");
-diff --git a/arch/avr32/configs/atngw100_defconfig b/arch/avr32/configs/atngw100_defconfig
-index b799a68..adce168 100644
+ atstk1000_setup_j2_leds();
+ atstk1004_setup_extdac();
--- a/arch/avr32/configs/atngw100_defconfig
+++ b/arch/avr32/configs/atngw100_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
--# Linux kernel version: 2.6.22-rc5
--# Sat Jun 23 15:40:05 2007
-+# Linux kernel version: 2.6.22.atmel.1
-+# Thu Jul 12 17:49:20 2007
+-# Linux kernel version: 2.6.24-rc7
+-# Wed Jan 9 23:20:41 2008
++# Linux kernel version: 2.6.25.4
++# Wed Jun 11 15:23:36 2008
#
CONFIG_AVR32=y
CONFIG_GENERIC_GPIO=y
-@@ -114,6 +114,7 @@ CONFIG_PLATFORM_AT32AP=y
+@@ -13,10 +13,10 @@ CONFIG_HARDIRQS_SW_RESEND=y
+ CONFIG_GENERIC_IRQ_PROBE=y
+ CONFIG_RWSEM_GENERIC_SPINLOCK=y
+ CONFIG_GENERIC_TIME=y
++CONFIG_GENERIC_CLOCKEVENTS=y
+ # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+ # CONFIG_ARCH_HAS_ILOG2_U32 is not set
+ # CONFIG_ARCH_HAS_ILOG2_U64 is not set
+-CONFIG_ARCH_SUPPORTS_OPROFILE=y
+ CONFIG_GENERIC_HWEIGHT=y
+ CONFIG_GENERIC_CALIBRATE_DELAY=y
+ CONFIG_GENERIC_BUG=y
+@@ -37,17 +37,15 @@ CONFIG_POSIX_MQUEUE=y
+ CONFIG_BSD_PROCESS_ACCT=y
+ CONFIG_BSD_PROCESS_ACCT_V3=y
+ # CONFIG_TASKSTATS is not set
+-# CONFIG_USER_NS is not set
+-# CONFIG_PID_NS is not set
+ # CONFIG_AUDIT is not set
+ # CONFIG_IKCONFIG is not set
+ CONFIG_LOG_BUF_SHIFT=14
+ # CONFIG_CGROUPS is not set
+-CONFIG_FAIR_GROUP_SCHED=y
+-CONFIG_FAIR_USER_SCHED=y
+-# CONFIG_FAIR_CGROUP_SCHED is not set
++# CONFIG_GROUP_SCHED is not set
+ CONFIG_SYSFS_DEPRECATED=y
++CONFIG_SYSFS_DEPRECATED_V2=y
+ # CONFIG_RELAY is not set
++# CONFIG_NAMESPACES is not set
+ CONFIG_BLK_DEV_INITRD=y
+ CONFIG_INITRAMFS_SOURCE=""
+ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+@@ -61,11 +59,13 @@ CONFIG_HOTPLUG=y
+ CONFIG_PRINTK=y
+ CONFIG_BUG=y
+ CONFIG_ELF_CORE=y
++# CONFIG_COMPAT_BRK is not set
+ # CONFIG_BASE_FULL is not set
+ CONFIG_FUTEX=y
+ CONFIG_ANON_INODES=y
+ CONFIG_EPOLL=y
+ CONFIG_SIGNALFD=y
++CONFIG_TIMERFD=y
+ CONFIG_EVENTFD=y
+ CONFIG_SHMEM=y
+ CONFIG_VM_EVENT_COUNTERS=y
+@@ -73,6 +73,14 @@ CONFIG_SLUB_DEBUG=y
+ # CONFIG_SLAB is not set
+ CONFIG_SLUB=y
+ # CONFIG_SLOB is not set
++CONFIG_PROFILING=y
++# CONFIG_MARKERS is not set
++CONFIG_OPROFILE=m
++CONFIG_HAVE_OPROFILE=y
++CONFIG_KPROBES=y
++CONFIG_HAVE_KPROBES=y
++# CONFIG_HAVE_KRETPROBES is not set
++CONFIG_PROC_PAGE_MONITOR=y
+ CONFIG_SLABINFO=y
+ CONFIG_RT_MUTEXES=y
+ # CONFIG_TINY_SHMEM is not set
+@@ -101,10 +109,15 @@ CONFIG_IOSCHED_CFQ=y
+ CONFIG_DEFAULT_CFQ=y
+ # CONFIG_DEFAULT_NOOP is not set
+ CONFIG_DEFAULT_IOSCHED="cfq"
++CONFIG_CLASSIC_RCU=y
+
+ #
+ # System Type and features
+ #
++CONFIG_TICK_ONESHOT=y
++CONFIG_NO_HZ=y
++CONFIG_HIGH_RES_TIMERS=y
++CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+ CONFIG_SUBARCH_AVR32B=y
+ CONFIG_MMU=y
+ CONFIG_PERFORMANCE_COUNTERS=y
+@@ -113,6 +126,7 @@ CONFIG_CPU_AT32AP700X=y
CONFIG_CPU_AT32AP7000=y
# CONFIG_BOARD_ATSTK1000 is not set
CONFIG_BOARD_ATNGW100=y
-+# CONFIG_BOARD_ATNGW100_I2C_GPIO is not set
++CONFIG_BOARD_ATNGW100_I2C_GPIO=y
CONFIG_LOADER_U_BOOT=y
#
-@@ -122,6 +123,7 @@ CONFIG_LOADER_U_BOOT=y
- # CONFIG_AP7000_32_BIT_SMC is not set
- CONFIG_AP7000_16_BIT_SMC=y
- # CONFIG_AP7000_8_BIT_SMC is not set
+@@ -121,6 +135,7 @@ CONFIG_LOADER_U_BOOT=y
+ # CONFIG_AP700X_32_BIT_SMC is not set
+ CONFIG_AP700X_16_BIT_SMC=y
+ # CONFIG_AP700X_8_BIT_SMC is not set
+CONFIG_GPIO_DEV=y
CONFIG_LOAD_ADDRESS=0x10000000
CONFIG_ENTRY_ADDRESS=0x90000000
CONFIG_PHYS_OFFSET=0x10000000
-@@ -145,6 +147,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
- # CONFIG_RESOURCES_64BIT is not set
+@@ -146,16 +161,26 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_ZONE_DMA_FLAG=0
+ CONFIG_VIRT_TO_BUS=y
# CONFIG_OWNERSHIP_TRACE is not set
++CONFIG_NMI_DEBUGGING=y
+CONFIG_DW_DMAC=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
-@@ -153,6 +156,27 @@ CONFIG_HZ=250
+ # CONFIG_HZ_1000 is not set
+ CONFIG_HZ=250
++# CONFIG_SCHED_HRTICK is not set
CONFIG_CMDLINE=""
#
-+# Power managment options
-+#
-+
-+#
-+# CPU Frequency scaling
-+#
-+CONFIG_CPU_FREQ=y
-+CONFIG_CPU_FREQ_TABLE=y
-+# CONFIG_CPU_FREQ_DEBUG is not set
-+CONFIG_CPU_FREQ_STAT=m
-+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
-+CONFIG_CPU_FREQ_GOV_USERSPACE=y
-+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-+CONFIG_CPU_FREQ_AT32AP=y
-+
-+#
- # Bus options
+ # Power management options
+ #
++CONFIG_ARCH_SUSPEND_POSSIBLE=y
++CONFIG_PM=y
++# CONFIG_PM_LEGACY is not set
++# CONFIG_PM_DEBUG is not set
++CONFIG_PM_SLEEP=y
++CONFIG_SUSPEND=y
++CONFIG_SUSPEND_FREEZER=y
+
#
- # CONFIG_ARCH_SUPPORTS_MSI is not set
-@@ -187,13 +211,8 @@ CONFIG_NET_KEY=y
+ # CPU Frequency scaling
+@@ -164,9 +189,9 @@ CONFIG_CPU_FREQ=y
+ CONFIG_CPU_FREQ_TABLE=y
+ # CONFIG_CPU_FREQ_DEBUG is not set
+ # CONFIG_CPU_FREQ_STAT is not set
+-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
++# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+ # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
++CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
+ # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+ CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+ # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+@@ -202,6 +227,7 @@ CONFIG_XFRM=y
+ CONFIG_XFRM_USER=y
+ # CONFIG_XFRM_SUB_POLICY is not set
+ # CONFIG_XFRM_MIGRATE is not set
++# CONFIG_XFRM_STATISTICS is not set
+ CONFIG_NET_KEY=y
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
- CONFIG_IP_MULTICAST=y
--CONFIG_IP_ADVANCED_ROUTER=y
--CONFIG_ASK_IP_FIB_HASH=y
--# CONFIG_IP_FIB_TRIE is not set
-+# CONFIG_IP_ADVANCED_ROUTER is not set
- CONFIG_IP_FIB_HASH=y
--# CONFIG_IP_MULTIPLE_TABLES is not set
--# CONFIG_IP_ROUTE_MULTIPATH is not set
--# CONFIG_IP_ROUTE_VERBOSE is not set
- CONFIG_IP_PNP=y
- CONFIG_IP_PNP_DHCP=y
- # CONFIG_IP_PNP_BOOTP is not set
-@@ -240,6 +259,7 @@ CONFIG_IPV6_SIT=y
+@@ -260,82 +286,33 @@ CONFIG_IPV6_SIT=y
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
-+CONFIG_BRIDGE_NETFILTER=y
+-CONFIG_BRIDGE_NETFILTER=y
++# CONFIG_NETFILTER_ADVANCED is not set
#
# Core Netfilter Configuration
-@@ -284,6 +304,7 @@ CONFIG_NETFILTER_XT_MATCH_MAC=m
+ #
+-# CONFIG_NETFILTER_NETLINK is not set
+-CONFIG_NF_CONNTRACK_ENABLED=m
++CONFIG_NETFILTER_NETLINK=m
++CONFIG_NETFILTER_NETLINK_LOG=m
+ CONFIG_NF_CONNTRACK=m
+-CONFIG_NF_CT_ACCT=y
+-CONFIG_NF_CONNTRACK_MARK=y
+-# CONFIG_NF_CONNTRACK_EVENTS is not set
+-CONFIG_NF_CT_PROTO_GRE=m
+-# CONFIG_NF_CT_PROTO_SCTP is not set
+-# CONFIG_NF_CT_PROTO_UDPLITE is not set
+-CONFIG_NF_CONNTRACK_AMANDA=m
+ CONFIG_NF_CONNTRACK_FTP=m
+-CONFIG_NF_CONNTRACK_H323=m
+ CONFIG_NF_CONNTRACK_IRC=m
+-CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+-CONFIG_NF_CONNTRACK_PPTP=m
+-CONFIG_NF_CONNTRACK_SANE=m
+ CONFIG_NF_CONNTRACK_SIP=m
+-CONFIG_NF_CONNTRACK_TFTP=m
++CONFIG_NF_CT_NETLINK=m
+ CONFIG_NETFILTER_XTABLES=y
+-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+-# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
+-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+ CONFIG_NETFILTER_XT_TARGET_MARK=m
+-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+ CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+-# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
+-# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
+ CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+-# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
+-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+ CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
+-CONFIG_NETFILTER_XT_MATCH_ESP=m
+-CONFIG_NETFILTER_XT_MATCH_HELPER=m
+-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+-CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
- CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-+# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
- CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
- CONFIG_NETFILTER_XT_MATCH_QUOTA=m
- CONFIG_NETFILTER_XT_MATCH_REALM=m
-@@ -359,13 +380,19 @@ CONFIG_IP6_NF_TARGET_REJECT=m
+-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+-# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
+-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+-CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+-CONFIG_NETFILTER_XT_MATCH_REALM=m
+-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
+ CONFIG_NETFILTER_XT_MATCH_STATE=m
+-CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+-CONFIG_NETFILTER_XT_MATCH_STRING=m
+-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+-# CONFIG_NETFILTER_XT_MATCH_TIME is not set
+-# CONFIG_NETFILTER_XT_MATCH_U32 is not set
+-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+
+ #
+ # IP: Netfilter Configuration
+ #
+ CONFIG_NF_CONNTRACK_IPV4=m
+ CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+-# CONFIG_IP_NF_QUEUE is not set
+ CONFIG_IP_NF_IPTABLES=m
+-CONFIG_IP_NF_MATCH_IPRANGE=m
+-CONFIG_IP_NF_MATCH_TOS=m
+-CONFIG_IP_NF_MATCH_RECENT=m
+-CONFIG_IP_NF_MATCH_ECN=m
+-CONFIG_IP_NF_MATCH_AH=m
+-CONFIG_IP_NF_MATCH_TTL=m
+-CONFIG_IP_NF_MATCH_OWNER=m
+-CONFIG_IP_NF_MATCH_ADDRTYPE=m
+ CONFIG_IP_NF_FILTER=m
+ CONFIG_IP_NF_TARGET_REJECT=m
+ CONFIG_IP_NF_TARGET_LOG=m
+@@ -343,54 +320,25 @@ CONFIG_IP_NF_TARGET_LOG=m
+ CONFIG_NF_NAT=m
+ CONFIG_NF_NAT_NEEDED=y
+ CONFIG_IP_NF_TARGET_MASQUERADE=m
+-CONFIG_IP_NF_TARGET_REDIRECT=m
+-CONFIG_IP_NF_TARGET_NETMAP=m
+-CONFIG_IP_NF_TARGET_SAME=m
+-CONFIG_NF_NAT_SNMP_BASIC=m
+-CONFIG_NF_NAT_PROTO_GRE=m
+ CONFIG_NF_NAT_FTP=m
+ CONFIG_NF_NAT_IRC=m
+-CONFIG_NF_NAT_TFTP=m
+-CONFIG_NF_NAT_AMANDA=m
+-CONFIG_NF_NAT_PPTP=m
+-CONFIG_NF_NAT_H323=m
++# CONFIG_NF_NAT_TFTP is not set
++# CONFIG_NF_NAT_AMANDA is not set
++# CONFIG_NF_NAT_PPTP is not set
++# CONFIG_NF_NAT_H323 is not set
+ CONFIG_NF_NAT_SIP=m
+ CONFIG_IP_NF_MANGLE=m
+-CONFIG_IP_NF_TARGET_TOS=m
+-CONFIG_IP_NF_TARGET_ECN=m
+-CONFIG_IP_NF_TARGET_TTL=m
+-CONFIG_IP_NF_TARGET_CLUSTERIP=m
+-CONFIG_IP_NF_RAW=m
+-CONFIG_IP_NF_ARPTABLES=m
+-CONFIG_IP_NF_ARPFILTER=m
+-CONFIG_IP_NF_ARP_MANGLE=m
+
+ #
+-# IPv6: Netfilter Configuration (EXPERIMENTAL)
++# IPv6: Netfilter Configuration
+ #
+ CONFIG_NF_CONNTRACK_IPV6=m
+-CONFIG_IP6_NF_QUEUE=m
+ CONFIG_IP6_NF_IPTABLES=m
+-CONFIG_IP6_NF_MATCH_RT=m
+-CONFIG_IP6_NF_MATCH_OPTS=m
+-CONFIG_IP6_NF_MATCH_FRAG=m
+-CONFIG_IP6_NF_MATCH_HL=m
+-CONFIG_IP6_NF_MATCH_OWNER=m
+ CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+-CONFIG_IP6_NF_MATCH_AH=m
+-CONFIG_IP6_NF_MATCH_MH=m
+-CONFIG_IP6_NF_MATCH_EUI64=m
+ CONFIG_IP6_NF_FILTER=m
+ CONFIG_IP6_NF_TARGET_LOG=m
+ CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
- CONFIG_IP6_NF_TARGET_HL=m
- CONFIG_IP6_NF_RAW=m
-+
-+#
-+# Bridge: Netfilter Configuration
-+#
-+# CONFIG_BRIDGE_NF_EBTABLES is not set
+-CONFIG_IP6_NF_TARGET_HL=m
+-CONFIG_IP6_NF_RAW=m
+-
+-#
+-# Bridge: Netfilter Configuration
+-#
+-# CONFIG_BRIDGE_NF_EBTABLES is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
- # CONFIG_ATM is not set
--# CONFIG_BRIDGE is not set
-+CONFIG_BRIDGE=m
- CONFIG_VLAN_8021Q=m
- # CONFIG_DECNET is not set
-+CONFIG_LLC=m
- # CONFIG_LLC2 is not set
- # CONFIG_IPX is not set
- # CONFIG_ATALK is not set
-@@ -521,7 +548,6 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
- #
- # Misc devices
- #
--# CONFIG_BLINK is not set
- # CONFIG_IDE is not set
+@@ -407,7 +355,6 @@ CONFIG_LLC=m
+ # CONFIG_ECONET is not set
+ # CONFIG_WAN_ROUTER is not set
+ # CONFIG_NET_SCHED is not set
+-CONFIG_NET_CLS_ROUTE=y
#
-@@ -545,13 +571,26 @@ CONFIG_NETDEVICES=y
- # CONFIG_BONDING is not set
- # CONFIG_EQUALIZER is not set
- CONFIG_TUN=m
--# CONFIG_PHYLIB is not set
-+CONFIG_PHYLIB=y
-+
-+#
-+# MII PHY device drivers
-+#
-+# CONFIG_MARVELL_PHY is not set
-+# CONFIG_DAVICOM_PHY is not set
-+# CONFIG_QSEMI_PHY is not set
-+# CONFIG_LXT_PHY is not set
-+# CONFIG_CICADA_PHY is not set
-+# CONFIG_VITESSE_PHY is not set
-+# CONFIG_SMSC_PHY is not set
-+# CONFIG_BROADCOM_PHY is not set
-+# CONFIG_FIXED_PHY is not set
+ # Network testing
+@@ -415,6 +362,7 @@ CONFIG_NET_CLS_ROUTE=y
+ # CONFIG_NET_PKTGEN is not set
+ # CONFIG_NET_TCPPROBE is not set
+ # CONFIG_HAMRADIO is not set
++# CONFIG_CAN is not set
+ # CONFIG_IRDA is not set
+ # CONFIG_BT is not set
+ # CONFIG_AF_RXRPC is not set
+@@ -531,11 +479,18 @@ CONFIG_BLK_DEV_NBD=m
+ CONFIG_BLK_DEV_RAM=m
+ CONFIG_BLK_DEV_RAM_COUNT=16
+ CONFIG_BLK_DEV_RAM_SIZE=4096
+-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
++# CONFIG_BLK_DEV_XIP is not set
+ # CONFIG_CDROM_PKTCDVD is not set
+ # CONFIG_ATA_OVER_ETH is not set
+-# CONFIG_MISC_DEVICES is not set
+-# CONFIG_IDE is not set
++CONFIG_MISC_DEVICES=y
++# CONFIG_ATMEL_PWM is not set
++CONFIG_ATMEL_TCLIB=y
++CONFIG_ATMEL_TCB_CLKSRC=y
++CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
++# CONFIG_EEPROM_93CX6 is not set
++# CONFIG_ATMEL_SSC is not set
++# CONFIG_ENCLOSURE_SERVICES is not set
++# CONFIG_HAVE_IDE is not set
#
- # Ethernet (10 or 100Mbit)
- #
+ # SCSI device support
+@@ -568,11 +523,13 @@ CONFIG_PHYLIB=y
+ # CONFIG_SMSC_PHY is not set
+ # CONFIG_BROADCOM_PHY is not set
+ # CONFIG_ICPLUS_PHY is not set
++# CONFIG_REALTEK_PHY is not set
+ # CONFIG_FIXED_PHY is not set
+ # CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
--CONFIG_MII=y
-+# CONFIG_MII is not set
+ # CONFIG_MII is not set
CONFIG_MACB=y
- # CONFIG_NETDEV_1000 is not set
- # CONFIG_NETDEV_10000 is not set
-@@ -625,7 +664,15 @@ CONFIG_UNIX98_PTYS=y
- # IPMI
++# CONFIG_ENC28J60 is not set
+ # CONFIG_IBM_NEW_EMAC_ZMII is not set
+ # CONFIG_IBM_NEW_EMAC_RGMII is not set
+ # CONFIG_IBM_NEW_EMAC_TAH is not set
+@@ -599,7 +556,6 @@ CONFIG_PPPOE=m
+ # CONFIG_PPPOL2TP is not set
+ # CONFIG_SLIP is not set
+ CONFIG_SLHC=m
+-# CONFIG_SHAPER is not set
+ # CONFIG_NETCONSOLE is not set
+ # CONFIG_NETPOLL is not set
+ # CONFIG_NET_POLL_CONTROLLER is not set
+@@ -633,6 +589,7 @@ CONFIG_SLHC=m
#
+ CONFIG_SERIAL_ATMEL=y
+ CONFIG_SERIAL_ATMEL_CONSOLE=y
++CONFIG_SERIAL_ATMEL_PDC=y
+ # CONFIG_SERIAL_ATMEL_TTYAT is not set
+ CONFIG_SERIAL_CORE=y
+ CONFIG_SERIAL_CORE_CONSOLE=y
+@@ -640,8 +597,6 @@ CONFIG_UNIX98_PTYS=y
+ # CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
--# CONFIG_WATCHDOG is not set
-+CONFIG_WATCHDOG=y
-+# CONFIG_WATCHDOG_NOWAYOUT is not set
-+
-+#
-+# Watchdog Device Drivers
-+#
-+# CONFIG_SOFT_WATCHDOG is not set
-+CONFIG_AT32AP700X_WDT=y
-+CONFIG_AT32AP700X_WDT_TIMEOUT=2
# CONFIG_HW_RANDOM is not set
- # CONFIG_RTC is not set
- # CONFIG_GEN_RTC is not set
-@@ -636,7 +683,42 @@ CONFIG_UNIX98_PTYS=y
- # TPM devices
- #
+-# CONFIG_RTC is not set
+-# CONFIG_GEN_RTC is not set
+ # CONFIG_R3964 is not set
+ # CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
--# CONFIG_I2C is not set
-+CONFIG_I2C=m
-+CONFIG_I2C_BOARDINFO=y
-+CONFIG_I2C_CHARDEV=m
+@@ -659,6 +614,7 @@ CONFIG_I2C_ALGOBIT=m
+ #
+ # I2C Hardware Bus support
+ #
++CONFIG_I2C_ATMELTWI=m
+ CONFIG_I2C_GPIO=m
+ # CONFIG_I2C_OCORES is not set
+ # CONFIG_I2C_PARPORT_LIGHT is not set
+@@ -669,13 +625,12 @@ CONFIG_I2C_GPIO=m
+ #
+ # Miscellaneous I2C Chip support
+ #
+-# CONFIG_SENSORS_DS1337 is not set
+-# CONFIG_SENSORS_DS1374 is not set
+ # CONFIG_DS1682 is not set
+ # CONFIG_SENSORS_EEPROM is not set
+ # CONFIG_SENSORS_PCF8574 is not set
+-# CONFIG_SENSORS_PCA9539 is not set
++# CONFIG_PCF8575 is not set
+ # CONFIG_SENSORS_PCF8591 is not set
++# CONFIG_TPS65010 is not set
+ # CONFIG_SENSORS_MAX6875 is not set
+ # CONFIG_SENSORS_TSL2550 is not set
+ # CONFIG_I2C_DEBUG_CORE is not set
+@@ -702,9 +657,27 @@ CONFIG_SPI_ATMEL=y
+ # CONFIG_SPI_AT25 is not set
+ CONFIG_SPI_SPIDEV=m
+ # CONFIG_SPI_TLE62X0 is not set
++CONFIG_HAVE_GPIO_LIB=y
+
+#
-+# I2C Algorithms
++# GPIO Support
+#
-+CONFIG_I2C_ALGOBIT=m
-+# CONFIG_I2C_ALGOPCF is not set
-+# CONFIG_I2C_ALGOPCA is not set
++# CONFIG_DEBUG_GPIO is not set
+
+#
-+# I2C Hardware Bus support
++# I2C GPIO expanders:
+#
-+CONFIG_I2C_ATMELTWI=m
-+CONFIG_I2C_ATMELTWI_BAUDRATE=100000
-+CONFIG_I2C_GPIO=m
-+# CONFIG_I2C_OCORES is not set
-+# CONFIG_I2C_PARPORT_LIGHT is not set
-+# CONFIG_I2C_SIMTEC is not set
-+# CONFIG_I2C_STUB is not set
++# CONFIG_GPIO_PCA953X is not set
++# CONFIG_GPIO_PCF857X is not set
+
+#
-+# Miscellaneous I2C Chip support
++# SPI GPIO expanders:
+#
-+# CONFIG_SENSORS_DS1337 is not set
-+# CONFIG_SENSORS_DS1374 is not set
-+# CONFIG_SENSORS_EEPROM is not set
-+# CONFIG_SENSORS_PCF8574 is not set
-+# CONFIG_SENSORS_PCA9539 is not set
-+# CONFIG_SENSORS_PCF8591 is not set
-+# CONFIG_SENSORS_MAX6875 is not set
-+# CONFIG_I2C_DEBUG_CORE is not set
-+# CONFIG_I2C_DEBUG_ALGO is not set
-+# CONFIG_I2C_DEBUG_BUS is not set
-+# CONFIG_I2C_DEBUG_CHIP is not set
++# CONFIG_GPIO_MCP23S08 is not set
+ # CONFIG_W1 is not set
+ # CONFIG_POWER_SUPPLY is not set
+ # CONFIG_HWMON is not set
++# CONFIG_THERMAL is not set
+ CONFIG_WATCHDOG=y
+ # CONFIG_WATCHDOG_NOWAYOUT is not set
+@@ -757,10 +730,6 @@ CONFIG_USB_SUPPORT=y
#
- # SPI support
-@@ -655,7 +737,7 @@ CONFIG_SPI_ATMEL=y
- # SPI Protocol Masters
+ # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
- # CONFIG_SPI_AT25 is not set
--# CONFIG_SPI_SPIDEV is not set
-+CONFIG_SPI_SPIDEV=m
+-
+-#
+-# USB Gadget Support
+-#
+ CONFIG_USB_GADGET=y
+ # CONFIG_USB_GADGET_DEBUG is not set
+ # CONFIG_USB_GADGET_DEBUG_FILES is not set
+@@ -787,21 +756,24 @@ CONFIG_USB_FILE_STORAGE=m
+ # CONFIG_USB_FILE_STORAGE_TEST is not set
+ CONFIG_USB_G_SERIAL=m
+ # CONFIG_USB_MIDI_GADGET is not set
+-CONFIG_MMC=m
++# CONFIG_USB_G_PRINTER is not set
++CONFIG_MMC=y
+ # CONFIG_MMC_DEBUG is not set
+ # CONFIG_MMC_UNSAFE_RESUME is not set
#
- # Dallas's 1-wire bus
-@@ -706,8 +788,41 @@ CONFIG_SPI_ATMEL=y
+ # MMC/SD Card Drivers
#
- # USB Gadget Support
+-CONFIG_MMC_BLOCK=m
++CONFIG_MMC_BLOCK=y
+ CONFIG_MMC_BLOCK_BOUNCE=y
+ # CONFIG_SDIO_UART is not set
+
#
--# CONFIG_USB_GADGET is not set
--# CONFIG_MMC is not set
-+CONFIG_USB_GADGET=y
-+# CONFIG_USB_GADGET_DEBUG_FILES is not set
-+CONFIG_USB_GADGET_SELECTED=y
-+# CONFIG_USB_GADGET_FSL_USB2 is not set
-+# CONFIG_USB_GADGET_NET2280 is not set
-+# CONFIG_USB_GADGET_PXA2XX is not set
-+# CONFIG_USB_GADGET_GOKU is not set
-+# CONFIG_USB_GADGET_LH7A40X is not set
-+CONFIG_USB_GADGET_ATMEL_USBA=y
-+CONFIG_USB_ATMEL_USBA=y
-+# CONFIG_USB_GADGET_OMAP is not set
-+# CONFIG_USB_GADGET_AT91 is not set
-+# CONFIG_USB_GADGET_DUMMY_HCD is not set
-+CONFIG_USB_GADGET_DUALSPEED=y
-+CONFIG_USB_ZERO=m
-+CONFIG_USB_ETH=m
-+CONFIG_USB_ETH_RNDIS=y
-+CONFIG_USB_GADGETFS=m
-+CONFIG_USB_FILE_STORAGE=m
-+# CONFIG_USB_FILE_STORAGE_TEST is not set
-+CONFIG_USB_G_SERIAL=m
-+# CONFIG_USB_MIDI_GADGET is not set
-+CONFIG_MMC=y
-+# CONFIG_MMC_DEBUG is not set
-+# CONFIG_MMC_UNSAFE_RESUME is not set
-+
-+#
-+# MMC/SD Card Drivers
-+#
-+CONFIG_MMC_BLOCK=y
-+
-+#
-+# MMC/SD Host Controller Drivers
-+#
-+CONFIG_MMC_ATMELMCI=y
-
+ # MMC/SD Host Controller Drivers
#
- # LED devices
-@@ -727,27 +842,62 @@ CONFIG_LEDS_TRIGGERS=y
- CONFIG_LEDS_TRIGGER_TIMER=y
- CONFIG_LEDS_TRIGGER_HEARTBEAT=y
++CONFIG_MMC_ATMELMCI=y
+ CONFIG_MMC_SPI=m
++# CONFIG_MEMSTICK is not set
+ CONFIG_NEW_LEDS=y
+ CONFIG_LEDS_CLASS=y
-+#
-+# InfiniBand support
-+#
+@@ -844,19 +816,22 @@ CONFIG_RTC_INTF_DEV=y
+ # CONFIG_RTC_DRV_PCF8563 is not set
+ # CONFIG_RTC_DRV_PCF8583 is not set
+ # CONFIG_RTC_DRV_M41T80 is not set
++# CONFIG_RTC_DRV_S35390A is not set
#
--# LED drivers
-+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+ # SPI RTC drivers
#
+-# CONFIG_RTC_DRV_RS5C348 is not set
+ # CONFIG_RTC_DRV_MAX6902 is not set
++# CONFIG_RTC_DRV_R9701 is not set
++# CONFIG_RTC_DRV_RS5C348 is not set
#
--# LED Triggers
-+# Real Time Clock
+ # Platform RTC drivers
#
-+CONFIG_RTC_LIB=y
-+CONFIG_RTC_CLASS=y
-+CONFIG_RTC_HCTOSYS=y
-+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-+# CONFIG_RTC_DEBUG is not set
-
++# CONFIG_RTC_DRV_DS1511 is not set
+ # CONFIG_RTC_DRV_DS1553 is not set
+-# CONFIG_RTC_DRV_STK17TA8 is not set
+ # CONFIG_RTC_DRV_DS1742 is not set
++# CONFIG_RTC_DRV_STK17TA8 is not set
+ # CONFIG_RTC_DRV_M48T86 is not set
+ # CONFIG_RTC_DRV_M48T59 is not set
+ # CONFIG_RTC_DRV_V3020 is not set
+@@ -874,25 +849,23 @@ CONFIG_RTC_DRV_AT32AP700X=y
#
--# InfiniBand support
-+# RTC interfaces
+ # File systems
#
-+CONFIG_RTC_INTF_SYSFS=y
-+CONFIG_RTC_INTF_PROC=y
-+CONFIG_RTC_INTF_DEV=y
-+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-+# CONFIG_RTC_DRV_TEST is not set
+-CONFIG_EXT2_FS=m
++CONFIG_EXT2_FS=y
+ # CONFIG_EXT2_FS_XATTR is not set
+ # CONFIG_EXT2_FS_XIP is not set
+-CONFIG_EXT3_FS=m
++CONFIG_EXT3_FS=y
+ # CONFIG_EXT3_FS_XATTR is not set
+ # CONFIG_EXT4DEV_FS is not set
+-CONFIG_JBD=m
++CONFIG_JBD=y
+ # CONFIG_REISERFS_FS is not set
+ # CONFIG_JFS_FS is not set
+ # CONFIG_FS_POSIX_ACL is not set
+ # CONFIG_XFS_FS is not set
+ # CONFIG_GFS2_FS is not set
+ # CONFIG_OCFS2_FS is not set
+-# CONFIG_MINIX_FS is not set
+-# CONFIG_ROMFS_FS is not set
++# CONFIG_DNOTIFY is not set
+ CONFIG_INOTIFY=y
+ CONFIG_INOTIFY_USER=y
+ # CONFIG_QUOTA is not set
+-# CONFIG_DNOTIFY is not set
+ # CONFIG_AUTOFS_FS is not set
+ # CONFIG_AUTOFS4_FS is not set
+ CONFIG_FUSE_FS=m
+@@ -923,7 +896,7 @@ CONFIG_SYSFS=y
+ CONFIG_TMPFS=y
+ # CONFIG_TMPFS_POSIX_ACL is not set
+ # CONFIG_HUGETLB_PAGE is not set
+-CONFIG_CONFIGFS_FS=m
++CONFIG_CONFIGFS_FS=y
#
--# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-+# I2C RTC drivers
- #
-+# CONFIG_RTC_DRV_DS1307 is not set
-+# CONFIG_RTC_DRV_DS1672 is not set
-+# CONFIG_RTC_DRV_MAX6900 is not set
-+# CONFIG_RTC_DRV_RS5C372 is not set
-+# CONFIG_RTC_DRV_ISL1208 is not set
-+# CONFIG_RTC_DRV_X1205 is not set
-+# CONFIG_RTC_DRV_PCF8563 is not set
-+# CONFIG_RTC_DRV_PCF8583 is not set
+ # Miscellaneous filesystems
+@@ -948,8 +921,10 @@ CONFIG_JFFS2_RTIME=y
+ # CONFIG_JFFS2_RUBIN is not set
+ # CONFIG_CRAMFS is not set
+ # CONFIG_VXFS_FS is not set
++# CONFIG_MINIX_FS is not set
+ # CONFIG_HPFS_FS is not set
+ # CONFIG_QNX4FS_FS is not set
++# CONFIG_ROMFS_FS is not set
+ # CONFIG_SYSV_FS is not set
+ # CONFIG_UFS_FS is not set
+ CONFIG_NETWORK_FILESYSTEMS=y
+@@ -1030,11 +1005,6 @@ CONFIG_NLS_ISO8859_1=m
+ # CONFIG_NLS_KOI8_U is not set
+ CONFIG_NLS_UTF8=m
+ # CONFIG_DLM is not set
+-CONFIG_INSTRUMENTATION=y
+-CONFIG_PROFILING=y
+-CONFIG_OPROFILE=m
+-CONFIG_KPROBES=y
+-# CONFIG_MARKERS is not set
#
--# Real Time Clock
-+# SPI RTC drivers
-+#
-+# CONFIG_RTC_DRV_RS5C348 is not set
-+# CONFIG_RTC_DRV_MAX6902 is not set
-+
-+#
-+# Platform RTC drivers
-+#
-+# CONFIG_RTC_DRV_DS1553 is not set
-+# CONFIG_RTC_DRV_DS1742 is not set
-+# CONFIG_RTC_DRV_M48T86 is not set
-+# CONFIG_RTC_DRV_V3020 is not set
-+
-+#
-+# on-CPU RTC drivers
- #
--# CONFIG_RTC_CLASS is not set
-+CONFIG_RTC_DRV_AT32AP700X=y
+ # Kernel hacking
+@@ -1053,6 +1023,7 @@ CONFIG_SCHED_DEBUG=y
+ # CONFIG_SCHEDSTATS is not set
+ # CONFIG_TIMER_STATS is not set
+ # CONFIG_SLUB_DEBUG_ON is not set
++# CONFIG_SLUB_STATS is not set
+ # CONFIG_DEBUG_RT_MUTEXES is not set
+ # CONFIG_RT_MUTEX_TESTER is not set
+ # CONFIG_DEBUG_SPINLOCK is not set
+@@ -1069,9 +1040,10 @@ CONFIG_DEBUG_BUGVERBOSE=y
+ # CONFIG_DEBUG_LIST is not set
+ # CONFIG_DEBUG_SG is not set
+ CONFIG_FRAME_POINTER=y
+-# CONFIG_FORCED_INLINING is not set
+ # CONFIG_BOOT_PRINTK_DELAY is not set
+ # CONFIG_RCU_TORTURE_TEST is not set
++# CONFIG_KPROBES_SANITY_TEST is not set
++# CONFIG_BACKTRACE_SELF_TEST is not set
+ # CONFIG_LKDTM is not set
+ # CONFIG_FAULT_INJECTION is not set
+ # CONFIG_SAMPLES is not set
+@@ -1084,7 +1056,9 @@ CONFIG_FRAME_POINTER=y
+ # CONFIG_SECURITY_FILE_CAPABILITIES is not set
+ CONFIG_CRYPTO=y
+ CONFIG_CRYPTO_ALGAPI=y
++CONFIG_CRYPTO_AEAD=y
+ CONFIG_CRYPTO_BLKCIPHER=y
++# CONFIG_CRYPTO_SEQIV is not set
+ CONFIG_CRYPTO_HASH=y
+ CONFIG_CRYPTO_MANAGER=y
+ CONFIG_CRYPTO_HMAC=y
+@@ -1103,6 +1077,9 @@ CONFIG_CRYPTO_CBC=y
+ CONFIG_CRYPTO_PCBC=m
+ # CONFIG_CRYPTO_LRW is not set
+ # CONFIG_CRYPTO_XTS is not set
++# CONFIG_CRYPTO_CTR is not set
++# CONFIG_CRYPTO_GCM is not set
++# CONFIG_CRYPTO_CCM is not set
+ # CONFIG_CRYPTO_CRYPTD is not set
+ CONFIG_CRYPTO_DES=y
+ # CONFIG_CRYPTO_FCRYPT is not set
+@@ -1117,12 +1094,14 @@ CONFIG_CRYPTO_ARC4=m
+ # CONFIG_CRYPTO_KHAZAD is not set
+ # CONFIG_CRYPTO_ANUBIS is not set
+ # CONFIG_CRYPTO_SEED is not set
++# CONFIG_CRYPTO_SALSA20 is not set
+ CONFIG_CRYPTO_DEFLATE=y
+ # CONFIG_CRYPTO_MICHAEL_MIC is not set
+ # CONFIG_CRYPTO_CRC32C is not set
+ # CONFIG_CRYPTO_CAMELLIA is not set
+ # CONFIG_CRYPTO_TEST is not set
+-# CONFIG_CRYPTO_AUTHENC is not set
++CONFIG_CRYPTO_AUTHENC=y
++# CONFIG_CRYPTO_LZO is not set
+ CONFIG_CRYPTO_HW=y
#
- # DMA Engine support
-@@ -781,7 +931,8 @@ CONFIG_JBD=y
- # CONFIG_OCFS2_FS is not set
- # CONFIG_MINIX_FS is not set
- # CONFIG_ROMFS_FS is not set
--# CONFIG_INOTIFY is not set
-+CONFIG_INOTIFY=y
-+CONFIG_INOTIFY_USER=y
- # CONFIG_QUOTA is not set
- # CONFIG_DNOTIFY is not set
- # CONFIG_AUTOFS_FS is not set
-@@ -936,7 +1087,7 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
- CONFIG_ENABLE_MUST_CHECK=y
- CONFIG_MAGIC_SYSRQ=y
- # CONFIG_UNUSED_SYMBOLS is not set
--# CONFIG_DEBUG_FS is not set
-+CONFIG_DEBUG_FS=y
- # CONFIG_HEADERS_CHECK is not set
- CONFIG_DEBUG_KERNEL=y
- # CONFIG_DEBUG_SHIRQ is not set
-diff --git a/arch/avr32/configs/atstk1002_defconfig b/arch/avr32/configs/atstk1002_defconfig
-index 3b977fd..3708066 100644
+@@ -1137,10 +1116,7 @@ CONFIG_CRC7=m
+ # CONFIG_LIBCRC32C is not set
+ CONFIG_ZLIB_INFLATE=y
+ CONFIG_ZLIB_DEFLATE=y
+-CONFIG_TEXTSEARCH=y
+-CONFIG_TEXTSEARCH_KMP=m
+-CONFIG_TEXTSEARCH_BM=m
+-CONFIG_TEXTSEARCH_FSM=m
++CONFIG_GENERIC_ALLOCATOR=y
+ CONFIG_PLIST=y
+ CONFIG_HAS_IOMEM=y
+ CONFIG_HAS_IOPORT=y
--- a/arch/avr32/configs/atstk1002_defconfig
+++ b/arch/avr32/configs/atstk1002_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
--# Linux kernel version: 2.6.22-rc5
--# Sat Jun 23 15:32:08 2007
-+# Linux kernel version: 2.6.22.atmel.2
-+# Thu Jul 19 13:46:47 2007
+-# Linux kernel version: 2.6.24-rc7
+-# Wed Jan 9 23:07:43 2008
++# Linux kernel version: 2.6.25.4
++# Wed Jun 11 15:29:18 2008
#
CONFIG_AVR32=y
CONFIG_GENERIC_GPIO=y
-@@ -80,10 +80,10 @@ CONFIG_BASE_SMALL=1
- #
- CONFIG_MODULES=y
- CONFIG_MODULE_UNLOAD=y
--# CONFIG_MODULE_FORCE_UNLOAD is not set
-+CONFIG_MODULE_FORCE_UNLOAD=y
- # CONFIG_MODVERSIONS is not set
- # CONFIG_MODULE_SRCVERSION_ALL is not set
--# CONFIG_KMOD is not set
-+CONFIG_KMOD=y
-
- #
- # Block layer
-@@ -99,12 +99,12 @@ CONFIG_BLOCK=y
- CONFIG_IOSCHED_NOOP=y
- # CONFIG_IOSCHED_AS is not set
- # CONFIG_IOSCHED_DEADLINE is not set
--# CONFIG_IOSCHED_CFQ is not set
-+CONFIG_IOSCHED_CFQ=y
- # CONFIG_DEFAULT_AS is not set
- # CONFIG_DEFAULT_DEADLINE is not set
--# CONFIG_DEFAULT_CFQ is not set
--CONFIG_DEFAULT_NOOP=y
--CONFIG_DEFAULT_IOSCHED="noop"
-+CONFIG_DEFAULT_CFQ=y
-+# CONFIG_DEFAULT_NOOP is not set
-+CONFIG_DEFAULT_IOSCHED="cfq"
+@@ -13,10 +13,10 @@ CONFIG_HARDIRQS_SW_RESEND=y
+ CONFIG_GENERIC_IRQ_PROBE=y
+ CONFIG_RWSEM_GENERIC_SPINLOCK=y
+ CONFIG_GENERIC_TIME=y
++CONFIG_GENERIC_CLOCKEVENTS=y
+ # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+ # CONFIG_ARCH_HAS_ILOG2_U32 is not set
+ # CONFIG_ARCH_HAS_ILOG2_U64 is not set
+-CONFIG_ARCH_SUPPORTS_OPROFILE=y
+ CONFIG_GENERIC_HWEIGHT=y
+ CONFIG_GENERIC_CALIBRATE_DELAY=y
+ CONFIG_GENERIC_BUG=y
+@@ -36,15 +36,15 @@ CONFIG_SYSVIPC_SYSCTL=y
+ CONFIG_POSIX_MQUEUE=y
+ # CONFIG_BSD_PROCESS_ACCT is not set
+ # CONFIG_TASKSTATS is not set
+-# CONFIG_USER_NS is not set
+-# CONFIG_PID_NS is not set
+ # CONFIG_AUDIT is not set
+ # CONFIG_IKCONFIG is not set
+ CONFIG_LOG_BUF_SHIFT=14
+ # CONFIG_CGROUPS is not set
+-# CONFIG_FAIR_GROUP_SCHED is not set
++# CONFIG_GROUP_SCHED is not set
+ CONFIG_SYSFS_DEPRECATED=y
++CONFIG_SYSFS_DEPRECATED_V2=y
+ CONFIG_RELAY=y
++# CONFIG_NAMESPACES is not set
+ CONFIG_BLK_DEV_INITRD=y
+ CONFIG_INITRAMFS_SOURCE=""
+ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+@@ -58,11 +58,13 @@ CONFIG_HOTPLUG=y
+ CONFIG_PRINTK=y
+ CONFIG_BUG=y
+ CONFIG_ELF_CORE=y
++# CONFIG_COMPAT_BRK is not set
+ # CONFIG_BASE_FULL is not set
+ CONFIG_FUTEX=y
+ CONFIG_ANON_INODES=y
+ CONFIG_EPOLL=y
+ CONFIG_SIGNALFD=y
++CONFIG_TIMERFD=y
+ CONFIG_EVENTFD=y
+ CONFIG_SHMEM=y
+ CONFIG_VM_EVENT_COUNTERS=y
+@@ -70,6 +72,14 @@ CONFIG_SLUB_DEBUG=y
+ # CONFIG_SLAB is not set
+ CONFIG_SLUB=y
+ # CONFIG_SLOB is not set
++CONFIG_PROFILING=y
++# CONFIG_MARKERS is not set
++CONFIG_OPROFILE=m
++CONFIG_HAVE_OPROFILE=y
++CONFIG_KPROBES=y
++CONFIG_HAVE_KPROBES=y
++# CONFIG_HAVE_KRETPROBES is not set
++CONFIG_PROC_PAGE_MONITOR=y
+ CONFIG_SLABINFO=y
+ CONFIG_RT_MUTEXES=y
+ # CONFIG_TINY_SHMEM is not set
+@@ -98,10 +108,15 @@ CONFIG_IOSCHED_CFQ=y
+ CONFIG_DEFAULT_CFQ=y
+ # CONFIG_DEFAULT_NOOP is not set
+ CONFIG_DEFAULT_IOSCHED="cfq"
++CONFIG_CLASSIC_RCU=y
#
# System Type and features
-@@ -117,6 +117,11 @@ CONFIG_CPU_AT32AP7000=y
+ #
++CONFIG_TICK_ONESHOT=y
++CONFIG_NO_HZ=y
++CONFIG_HIGH_RES_TIMERS=y
++CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+ CONFIG_SUBARCH_AVR32B=y
+ CONFIG_MMU=y
+ CONFIG_PERFORMANCE_COUNTERS=y
+@@ -113,12 +128,16 @@ CONFIG_BOARD_ATSTK1000=y
CONFIG_BOARD_ATSTK1002=y
- CONFIG_BOARD_ATSTK1000=y
- # CONFIG_BOARD_ATNGW100 is not set
-+# CONFIG_BOARD_ATSTK1002_CUSTOM is not set
-+# CONFIG_BOARD_ATSTK1002_SPI1 is not set
-+# CONFIG_BOARD_ATSTK1002_J2_LED is not set
-+# CONFIG_BOARD_ATSTK1002_J2_LED8 is not set
-+# CONFIG_BOARD_ATSTK1002_J2_RGB is not set
+ # CONFIG_BOARD_ATSTK1003 is not set
+ # CONFIG_BOARD_ATSTK1004 is not set
++# CONFIG_BOARD_ATSTK1006 is not set
+ # CONFIG_BOARD_ATSTK100X_CUSTOM is not set
+ # CONFIG_BOARD_ATSTK100X_SPI1 is not set
+ # CONFIG_BOARD_ATSTK1000_J2_LED is not set
+ # CONFIG_BOARD_ATSTK1000_J2_LED8 is not set
+ # CONFIG_BOARD_ATSTK1000_J2_RGB is not set
+ CONFIG_BOARD_ATSTK1000_EXTDAC=y
++# CONFIG_BOARD_ATSTK100X_ENABLE_AC97 is not set
++# CONFIG_BOARD_ATSTK1000_CF_HACKS is not set
++# CONFIG_BOARD_ATSTK100X_ENABLE_PSIF is not set
CONFIG_LOADER_U_BOOT=y
#
-@@ -125,6 +130,7 @@ CONFIG_LOADER_U_BOOT=y
- # CONFIG_AP7000_32_BIT_SMC is not set
- CONFIG_AP7000_16_BIT_SMC=y
- # CONFIG_AP7000_8_BIT_SMC is not set
+@@ -127,6 +146,7 @@ CONFIG_LOADER_U_BOOT=y
+ # CONFIG_AP700X_32_BIT_SMC is not set
+ CONFIG_AP700X_16_BIT_SMC=y
+ # CONFIG_AP700X_8_BIT_SMC is not set
+CONFIG_GPIO_DEV=y
CONFIG_LOAD_ADDRESS=0x10000000
CONFIG_ENTRY_ADDRESS=0x90000000
CONFIG_PHYS_OFFSET=0x10000000
-@@ -148,6 +154,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
- # CONFIG_RESOURCES_64BIT is not set
+@@ -152,16 +172,26 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_ZONE_DMA_FLAG=0
+ CONFIG_VIRT_TO_BUS=y
# CONFIG_OWNERSHIP_TRACE is not set
++CONFIG_NMI_DEBUGGING=y
+CONFIG_DW_DMAC=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
-@@ -156,6 +163,27 @@ CONFIG_HZ=250
+ # CONFIG_HZ_1000 is not set
+ CONFIG_HZ=250
++# CONFIG_SCHED_HRTICK is not set
CONFIG_CMDLINE=""
#
-+# Power managment options
-+#
-+
-+#
-+# CPU Frequency scaling
-+#
-+CONFIG_CPU_FREQ=y
-+CONFIG_CPU_FREQ_TABLE=y
-+# CONFIG_CPU_FREQ_DEBUG is not set
-+CONFIG_CPU_FREQ_STAT=m
-+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
-+CONFIG_CPU_FREQ_GOV_USERSPACE=y
-+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-+CONFIG_CPU_FREQ_AT32AP=y
-+
-+#
- # Bus options
- #
- # CONFIG_ARCH_SUPPORTS_MSI is not set
-@@ -327,6 +355,8 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
- #
- # Self-contained MTD device drivers
- #
-+CONFIG_MTD_DATAFLASH=m
-+# CONFIG_MTD_M25P80 is not set
- # CONFIG_MTD_SLRAM is not set
- # CONFIG_MTD_PHRAM is not set
- # CONFIG_MTD_MTDRAM is not set
-@@ -373,7 +403,7 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
- #
- # Misc devices
+ # Power management options
#
--# CONFIG_BLINK is not set
-+CONFIG_ATMEL_SSC=m
- # CONFIG_IDE is not set
++CONFIG_ARCH_SUSPEND_POSSIBLE=y
++CONFIG_PM=y
++# CONFIG_PM_LEGACY is not set
++# CONFIG_PM_DEBUG is not set
++CONFIG_PM_SLEEP=y
++CONFIG_SUSPEND=y
++CONFIG_SUSPEND_FREEZER=y
#
-@@ -397,13 +427,26 @@ CONFIG_DUMMY=y
- # CONFIG_BONDING is not set
- # CONFIG_EQUALIZER is not set
- CONFIG_TUN=m
--# CONFIG_PHYLIB is not set
-+CONFIG_PHYLIB=y
-+
-+#
-+# MII PHY device drivers
-+#
-+# CONFIG_MARVELL_PHY is not set
-+# CONFIG_DAVICOM_PHY is not set
-+# CONFIG_QSEMI_PHY is not set
-+CONFIG_LXT_PHY=y
-+# CONFIG_CICADA_PHY is not set
-+# CONFIG_VITESSE_PHY is not set
-+# CONFIG_SMSC_PHY is not set
-+# CONFIG_BROADCOM_PHY is not set
-+# CONFIG_FIXED_PHY is not set
+ # CPU Frequency scaling
+@@ -170,9 +200,9 @@ CONFIG_CPU_FREQ=y
+ CONFIG_CPU_FREQ_TABLE=y
+ # CONFIG_CPU_FREQ_DEBUG is not set
+ # CONFIG_CPU_FREQ_STAT is not set
+-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
++# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+ # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
++CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
+ # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+ CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+ # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+@@ -208,6 +238,7 @@ CONFIG_XFRM=y
+ CONFIG_XFRM_USER=m
+ # CONFIG_XFRM_SUB_POLICY is not set
+ # CONFIG_XFRM_MIGRATE is not set
++# CONFIG_XFRM_STATISTICS is not set
+ CONFIG_NET_KEY=m
+ # CONFIG_NET_KEY_MIGRATE is not set
+ CONFIG_INET=y
+@@ -279,6 +310,7 @@ CONFIG_LLC=m
+ # CONFIG_NET_PKTGEN is not set
+ # CONFIG_NET_TCPPROBE is not set
+ # CONFIG_HAMRADIO is not set
++# CONFIG_CAN is not set
+ # CONFIG_IRDA is not set
+ # CONFIG_BT is not set
+ # CONFIG_AF_RXRPC is not set
+@@ -395,13 +427,18 @@ CONFIG_BLK_DEV_NBD=m
+ CONFIG_BLK_DEV_RAM=m
+ CONFIG_BLK_DEV_RAM_COUNT=16
+ CONFIG_BLK_DEV_RAM_SIZE=4096
+-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
++# CONFIG_BLK_DEV_XIP is not set
+ # CONFIG_CDROM_PKTCDVD is not set
+ # CONFIG_ATA_OVER_ETH is not set
+ CONFIG_MISC_DEVICES=y
++CONFIG_ATMEL_PWM=m
++CONFIG_ATMEL_TCLIB=y
++CONFIG_ATMEL_TCB_CLKSRC=y
++CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
+ # CONFIG_EEPROM_93CX6 is not set
+ CONFIG_ATMEL_SSC=m
+-# CONFIG_IDE is not set
++# CONFIG_ENCLOSURE_SERVICES is not set
++# CONFIG_HAVE_IDE is not set
#
- # Ethernet (10 or 100Mbit)
- #
+ # SCSI device support
+@@ -444,6 +481,7 @@ CONFIG_SCSI_WAIT_SCAN=m
+ # CONFIG_SCSI_LOWLEVEL is not set
+ CONFIG_ATA=m
+ # CONFIG_ATA_NONSTANDARD is not set
++# CONFIG_SATA_MV is not set
+ CONFIG_PATA_AT32=m
+ # CONFIG_PATA_PLATFORM is not set
+ # CONFIG_MD is not set
+@@ -469,11 +507,13 @@ CONFIG_PHYLIB=y
+ # CONFIG_SMSC_PHY is not set
+ # CONFIG_BROADCOM_PHY is not set
+ # CONFIG_ICPLUS_PHY is not set
++# CONFIG_REALTEK_PHY is not set
+ # CONFIG_FIXED_PHY is not set
+ # CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
--CONFIG_MII=y
-+# CONFIG_MII is not set
+ # CONFIG_MII is not set
CONFIG_MACB=y
- # CONFIG_NETDEV_1000 is not set
- # CONFIG_NETDEV_10000 is not set
-@@ -443,7 +486,42 @@ CONFIG_SLHC=m
++# CONFIG_ENC28J60 is not set
+ # CONFIG_IBM_NEW_EMAC_ZMII is not set
+ # CONFIG_IBM_NEW_EMAC_RGMII is not set
+ # CONFIG_IBM_NEW_EMAC_TAH is not set
+@@ -500,7 +540,6 @@ CONFIG_PPP_BSDCOMP=m
+ # CONFIG_PPPOL2TP is not set
+ # CONFIG_SLIP is not set
+ CONFIG_SLHC=m
+-# CONFIG_SHAPER is not set
+ # CONFIG_NETCONSOLE is not set
+ # CONFIG_NETPOLL is not set
+ # CONFIG_NET_POLL_CONTROLLER is not set
+@@ -568,6 +607,7 @@ CONFIG_MOUSE_GPIO=m
#
- # Input device support
+ CONFIG_SERIAL_ATMEL=y
+ CONFIG_SERIAL_ATMEL_CONSOLE=y
++CONFIG_SERIAL_ATMEL_PDC=y
+ # CONFIG_SERIAL_ATMEL_TTYAT is not set
+ CONFIG_SERIAL_CORE=y
+ CONFIG_SERIAL_CORE_CONSOLE=y
+@@ -575,8 +615,6 @@ CONFIG_UNIX98_PTYS=y
+ # CONFIG_LEGACY_PTYS is not set
+ # CONFIG_IPMI_HANDLER is not set
+ # CONFIG_HW_RANDOM is not set
+-# CONFIG_RTC is not set
+-# CONFIG_GEN_RTC is not set
+ # CONFIG_R3964 is not set
+ # CONFIG_RAW_DRIVER is not set
+ # CONFIG_TCG_TPM is not set
+@@ -594,6 +632,7 @@ CONFIG_I2C_ALGOBIT=m
#
--# CONFIG_INPUT is not set
-+CONFIG_INPUT=m
-+# CONFIG_INPUT_FF_MEMLESS is not set
-+CONFIG_INPUT_POLLDEV=m
-+
-+#
-+# Userland interfaces
-+#
-+CONFIG_INPUT_MOUSEDEV=m
-+CONFIG_INPUT_MOUSEDEV_PSAUX=y
-+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-+# CONFIG_INPUT_JOYDEV is not set
-+# CONFIG_INPUT_TSDEV is not set
-+# CONFIG_INPUT_EVDEV is not set
-+# CONFIG_INPUT_EVBUG is not set
-+
-+#
-+# Input Device Drivers
-+#
-+CONFIG_INPUT_KEYBOARD=y
-+# CONFIG_KEYBOARD_ATKBD is not set
-+# CONFIG_KEYBOARD_SUNKBD is not set
-+# CONFIG_KEYBOARD_LKKBD is not set
-+# CONFIG_KEYBOARD_XTKBD is not set
-+# CONFIG_KEYBOARD_NEWTON is not set
-+# CONFIG_KEYBOARD_STOWAWAY is not set
-+CONFIG_KEYBOARD_GPIO=m
-+CONFIG_INPUT_MOUSE=y
-+# CONFIG_MOUSE_PS2 is not set
-+# CONFIG_MOUSE_SERIAL is not set
-+# CONFIG_MOUSE_VSXXXAA is not set
-+CONFIG_MOUSE_GPIO=m
-+# CONFIG_INPUT_JOYSTICK is not set
-+# CONFIG_INPUT_TABLET is not set
-+# CONFIG_INPUT_TOUCHSCREEN is not set
-+# CONFIG_INPUT_MISC is not set
-
+ # I2C Hardware Bus support
#
- # Hardware I/O ports
-@@ -477,7 +555,15 @@ CONFIG_UNIX98_PTYS=y
- # IPMI
++CONFIG_I2C_ATMELTWI=m
+ CONFIG_I2C_GPIO=m
+ # CONFIG_I2C_OCORES is not set
+ # CONFIG_I2C_PARPORT_LIGHT is not set
+@@ -604,13 +643,12 @@ CONFIG_I2C_GPIO=m
#
- # CONFIG_IPMI_HANDLER is not set
--# CONFIG_WATCHDOG is not set
-+CONFIG_WATCHDOG=y
-+# CONFIG_WATCHDOG_NOWAYOUT is not set
-+
-+#
-+# Watchdog Device Drivers
-+#
-+# CONFIG_SOFT_WATCHDOG is not set
-+CONFIG_AT32AP700X_WDT=y
-+CONFIG_AT32AP700X_WDT_TIMEOUT=2
- # CONFIG_HW_RANDOM is not set
- # CONFIG_RTC is not set
- # CONFIG_GEN_RTC is not set
-@@ -488,13 +574,61 @@ CONFIG_UNIX98_PTYS=y
- # TPM devices
+ # Miscellaneous I2C Chip support
#
- # CONFIG_TCG_TPM is not set
--# CONFIG_I2C is not set
-+CONFIG_I2C=m
-+CONFIG_I2C_BOARDINFO=y
-+CONFIG_I2C_CHARDEV=m
+-# CONFIG_SENSORS_DS1337 is not set
+-# CONFIG_SENSORS_DS1374 is not set
+ # CONFIG_DS1682 is not set
+ # CONFIG_SENSORS_EEPROM is not set
+ # CONFIG_SENSORS_PCF8574 is not set
+-# CONFIG_SENSORS_PCA9539 is not set
++# CONFIG_PCF8575 is not set
+ # CONFIG_SENSORS_PCF8591 is not set
++# CONFIG_TPS65010 is not set
+ # CONFIG_SENSORS_MAX6875 is not set
+ # CONFIG_SENSORS_TSL2550 is not set
+ # CONFIG_I2C_DEBUG_CORE is not set
+@@ -637,9 +675,27 @@ CONFIG_SPI_ATMEL=y
+ # CONFIG_SPI_AT25 is not set
+ CONFIG_SPI_SPIDEV=m
+ # CONFIG_SPI_TLE62X0 is not set
++CONFIG_HAVE_GPIO_LIB=y
+
+#
-+# I2C Algorithms
++# GPIO Support
+#
-+CONFIG_I2C_ALGOBIT=m
-+# CONFIG_I2C_ALGOPCF is not set
-+# CONFIG_I2C_ALGOPCA is not set
++# CONFIG_DEBUG_GPIO is not set
+
+#
-+# I2C Hardware Bus support
++# I2C GPIO expanders:
+#
-+CONFIG_I2C_ATMELTWI=m
-+CONFIG_I2C_ATMELTWI_BAUDRATE=100000
-+CONFIG_I2C_GPIO=m
-+# CONFIG_I2C_OCORES is not set
-+# CONFIG_I2C_PARPORT_LIGHT is not set
-+# CONFIG_I2C_SIMTEC is not set
-+# CONFIG_I2C_STUB is not set
++# CONFIG_GPIO_PCA953X is not set
++# CONFIG_GPIO_PCF857X is not set
+
+#
-+# Miscellaneous I2C Chip support
++# SPI GPIO expanders:
+#
-+# CONFIG_SENSORS_DS1337 is not set
-+# CONFIG_SENSORS_DS1374 is not set
-+# CONFIG_SENSORS_EEPROM is not set
-+# CONFIG_SENSORS_PCF8574 is not set
-+# CONFIG_SENSORS_PCA9539 is not set
-+# CONFIG_SENSORS_PCF8591 is not set
-+# CONFIG_SENSORS_MAX6875 is not set
-+# CONFIG_I2C_DEBUG_CORE is not set
-+# CONFIG_I2C_DEBUG_ALGO is not set
-+# CONFIG_I2C_DEBUG_BUS is not set
-+# CONFIG_I2C_DEBUG_CHIP is not set
++# CONFIG_GPIO_MCP23S08 is not set
+ # CONFIG_W1 is not set
+ # CONFIG_POWER_SUPPLY is not set
+ # CONFIG_HWMON is not set
++# CONFIG_THERMAL is not set
+ CONFIG_WATCHDOG=y
+ # CONFIG_WATCHDOG_NOWAYOUT is not set
+@@ -732,12 +788,18 @@ CONFIG_SND_PCM_OSS_PLUGINS=y
#
- # SPI support
+ # Generic devices
#
--# CONFIG_SPI is not set
--# CONFIG_SPI_MASTER is not set
-+CONFIG_SPI=y
-+# CONFIG_SPI_DEBUG is not set
-+CONFIG_SPI_MASTER=y
++CONFIG_SND_AC97_CODEC=m
+ # CONFIG_SND_DUMMY is not set
+ # CONFIG_SND_MTPAV is not set
+ # CONFIG_SND_SERIAL_U16550 is not set
+ # CONFIG_SND_MPU401 is not set
+
+ #
++# AVR32 devices
++#
++CONFIG_SND_ATMEL_AC97=m
+
+#
-+# SPI Master Controller Drivers
+ # SPI devices
+ #
+ CONFIG_SND_AT73C213=m
+@@ -753,9 +815,14 @@ CONFIG_SND_AT73C213_TARGET_BITRATE=48000
+ #
+
+ #
++# ALSA SoC audio for Freescale SOCs
+#
-+CONFIG_SPI_ATMEL=y
-+# CONFIG_SPI_BITBANG is not set
+
+#
-+# SPI Protocol Masters
-+#
-+# CONFIG_SPI_AT25 is not set
-+CONFIG_SPI_SPIDEV=m
+ # Open Sound System
+ #
+ # CONFIG_SOUND_PRIME is not set
++CONFIG_AC97_BUS=m
+ # CONFIG_HID_SUPPORT is not set
+ CONFIG_USB_SUPPORT=y
+ # CONFIG_USB_ARCH_HAS_HCD is not set
+@@ -765,10 +832,6 @@ CONFIG_USB_SUPPORT=y
+ #
+ # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+ #
+-
+-#
+-# USB Gadget Support
+-#
+ CONFIG_USB_GADGET=y
+ # CONFIG_USB_GADGET_DEBUG is not set
+ # CONFIG_USB_GADGET_DEBUG_FILES is not set
+@@ -796,27 +859,31 @@ CONFIG_USB_FILE_STORAGE=m
+ # CONFIG_USB_FILE_STORAGE_TEST is not set
+ CONFIG_USB_G_SERIAL=m
+ # CONFIG_USB_MIDI_GADGET is not set
+-CONFIG_MMC=m
++# CONFIG_USB_G_PRINTER is not set
++CONFIG_MMC=y
+ # CONFIG_MMC_DEBUG is not set
+ # CONFIG_MMC_UNSAFE_RESUME is not set
#
- # Dallas's 1-wire bus
-@@ -517,19 +651,91 @@ CONFIG_UNIX98_PTYS=y
+ # MMC/SD Card Drivers
#
- # Graphics support
+-CONFIG_MMC_BLOCK=m
++CONFIG_MMC_BLOCK=y
+ CONFIG_MMC_BLOCK_BOUNCE=y
+ # CONFIG_SDIO_UART is not set
+
#
--# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-+CONFIG_BACKLIGHT_LCD_SUPPORT=y
-+CONFIG_LCD_CLASS_DEVICE=y
-+CONFIG_LCD_LTV350QV=y
-+# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
+ # MMC/SD Host Controller Drivers
+ #
++CONFIG_MMC_ATMELMCI=y
+ CONFIG_MMC_SPI=m
++# CONFIG_MEMSTICK is not set
+ CONFIG_NEW_LEDS=y
+ CONFIG_LEDS_CLASS=m
#
- # Display device support
+ # LED drivers
#
- # CONFIG_DISPLAY_SUPPORT is not set
- # CONFIG_VGASTATE is not set
--# CONFIG_FB is not set
-+CONFIG_FB=y
-+# CONFIG_FIRMWARE_EDID is not set
-+# CONFIG_FB_DDC is not set
-+CONFIG_FB_CFB_FILLRECT=y
-+CONFIG_FB_CFB_COPYAREA=y
-+CONFIG_FB_CFB_IMAGEBLIT=y
-+# CONFIG_FB_SYS_FILLRECT is not set
-+# CONFIG_FB_SYS_COPYAREA is not set
-+# CONFIG_FB_SYS_IMAGEBLIT is not set
-+# CONFIG_FB_SYS_FOPS is not set
-+CONFIG_FB_DEFERRED_IO=y
-+# CONFIG_FB_SVGALIB is not set
-+# CONFIG_FB_MACMODES is not set
-+# CONFIG_FB_BACKLIGHT is not set
-+# CONFIG_FB_MODE_HELPERS is not set
-+# CONFIG_FB_TILEBLITTING is not set
-+
-+#
-+# Frame buffer hardware drivers
-+#
-+# CONFIG_FB_S1D13XXX is not set
-+CONFIG_FB_ATMEL=y
-+# CONFIG_FB_VIRTUAL is not set
-+# CONFIG_LOGO is not set
++CONFIG_LEDS_ATMEL_PWM=m
+ CONFIG_LEDS_GPIO=m
#
- # Sound
+@@ -853,19 +920,22 @@ CONFIG_RTC_INTF_DEV=y
+ # CONFIG_RTC_DRV_PCF8563 is not set
+ # CONFIG_RTC_DRV_PCF8583 is not set
+ # CONFIG_RTC_DRV_M41T80 is not set
++# CONFIG_RTC_DRV_S35390A is not set
+
#
--# CONFIG_SOUND is not set
-+CONFIG_SOUND=m
-+
-+#
-+# Advanced Linux Sound Architecture
-+#
-+CONFIG_SND=m
-+CONFIG_SND_TIMER=m
-+CONFIG_SND_PCM=m
-+# CONFIG_SND_SEQUENCER is not set
-+CONFIG_SND_OSSEMUL=y
-+CONFIG_SND_MIXER_OSS=m
-+CONFIG_SND_PCM_OSS=m
-+CONFIG_SND_PCM_OSS_PLUGINS=y
-+# CONFIG_SND_DYNAMIC_MINORS is not set
-+# CONFIG_SND_SUPPORT_OLD_API is not set
-+CONFIG_SND_VERBOSE_PROCFS=y
-+# CONFIG_SND_VERBOSE_PRINTK is not set
-+# CONFIG_SND_DEBUG is not set
-+
-+#
-+# Generic devices
-+#
-+# CONFIG_SND_DUMMY is not set
-+# CONFIG_SND_MTPAV is not set
-+# CONFIG_SND_SERIAL_U16550 is not set
-+# CONFIG_SND_MPU401 is not set
-+
-+#
-+# SPI devices
-+#
-+CONFIG_SND_AT73C213=m
-+CONFIG_SND_AT73C213_TARGET_BITRATE=48000
+ # SPI RTC drivers
+ #
+-# CONFIG_RTC_DRV_RS5C348 is not set
+ # CONFIG_RTC_DRV_MAX6902 is not set
++# CONFIG_RTC_DRV_R9701 is not set
++# CONFIG_RTC_DRV_RS5C348 is not set
+
+ #
+ # Platform RTC drivers
+ #
++# CONFIG_RTC_DRV_DS1511 is not set
+ # CONFIG_RTC_DRV_DS1553 is not set
+-# CONFIG_RTC_DRV_STK17TA8 is not set
+ # CONFIG_RTC_DRV_DS1742 is not set
++# CONFIG_RTC_DRV_STK17TA8 is not set
+ # CONFIG_RTC_DRV_M48T86 is not set
+ # CONFIG_RTC_DRV_M48T59 is not set
+ # CONFIG_RTC_DRV_V3020 is not set
+@@ -883,13 +953,13 @@ CONFIG_RTC_DRV_AT32AP700X=y
+ #
+ # File systems
+ #
+-CONFIG_EXT2_FS=m
++CONFIG_EXT2_FS=y
+ # CONFIG_EXT2_FS_XATTR is not set
+ # CONFIG_EXT2_FS_XIP is not set
+-CONFIG_EXT3_FS=m
++CONFIG_EXT3_FS=y
+ # CONFIG_EXT3_FS_XATTR is not set
+ # CONFIG_EXT4DEV_FS is not set
+-CONFIG_JBD=m
++CONFIG_JBD=y
+ # CONFIG_JBD_DEBUG is not set
+ # CONFIG_REISERFS_FS is not set
+ # CONFIG_JFS_FS is not set
+@@ -897,12 +967,10 @@ CONFIG_JBD=m
+ # CONFIG_XFS_FS is not set
+ # CONFIG_GFS2_FS is not set
+ # CONFIG_OCFS2_FS is not set
+-CONFIG_MINIX_FS=m
+-# CONFIG_ROMFS_FS is not set
++# CONFIG_DNOTIFY is not set
+ CONFIG_INOTIFY=y
+ CONFIG_INOTIFY_USER=y
+ # CONFIG_QUOTA is not set
+-# CONFIG_DNOTIFY is not set
+ # CONFIG_AUTOFS_FS is not set
+ # CONFIG_AUTOFS4_FS is not set
+ CONFIG_FUSE_FS=m
+@@ -933,7 +1001,7 @@ CONFIG_SYSFS=y
+ CONFIG_TMPFS=y
+ # CONFIG_TMPFS_POSIX_ACL is not set
+ # CONFIG_HUGETLB_PAGE is not set
+-# CONFIG_CONFIGFS_FS is not set
++CONFIG_CONFIGFS_FS=y
+
+ #
+ # Miscellaneous filesystems
+@@ -957,8 +1025,10 @@ CONFIG_JFFS2_RTIME=y
+ # CONFIG_JFFS2_RUBIN is not set
+ # CONFIG_CRAMFS is not set
+ # CONFIG_VXFS_FS is not set
++CONFIG_MINIX_FS=m
+ # CONFIG_HPFS_FS is not set
+ # CONFIG_QNX4FS_FS is not set
++# CONFIG_ROMFS_FS is not set
+ # CONFIG_SYSV_FS is not set
+ # CONFIG_UFS_FS is not set
+ CONFIG_NETWORK_FILESYSTEMS=y
+@@ -1028,11 +1098,6 @@ CONFIG_NLS_ISO8859_1=m
+ # CONFIG_NLS_KOI8_U is not set
+ CONFIG_NLS_UTF8=m
+ # CONFIG_DLM is not set
+-CONFIG_INSTRUMENTATION=y
+-CONFIG_PROFILING=y
+-CONFIG_OPROFILE=m
+-CONFIG_KPROBES=y
+-# CONFIG_MARKERS is not set
+
+ #
+ # Kernel hacking
+@@ -1051,6 +1116,7 @@ CONFIG_SCHED_DEBUG=y
+ # CONFIG_SCHEDSTATS is not set
+ # CONFIG_TIMER_STATS is not set
+ # CONFIG_SLUB_DEBUG_ON is not set
++# CONFIG_SLUB_STATS is not set
+ # CONFIG_DEBUG_RT_MUTEXES is not set
+ # CONFIG_RT_MUTEX_TESTER is not set
+ # CONFIG_DEBUG_SPINLOCK is not set
+@@ -1067,9 +1133,10 @@ CONFIG_DEBUG_BUGVERBOSE=y
+ # CONFIG_DEBUG_LIST is not set
+ # CONFIG_DEBUG_SG is not set
+ CONFIG_FRAME_POINTER=y
+-CONFIG_FORCED_INLINING=y
+ # CONFIG_BOOT_PRINTK_DELAY is not set
+ # CONFIG_RCU_TORTURE_TEST is not set
++# CONFIG_KPROBES_SANITY_TEST is not set
++# CONFIG_BACKTRACE_SELF_TEST is not set
+ # CONFIG_LKDTM is not set
+ # CONFIG_FAULT_INJECTION is not set
+ # CONFIG_SAMPLES is not set
+@@ -1082,7 +1149,9 @@ CONFIG_FORCED_INLINING=y
+ # CONFIG_SECURITY_FILE_CAPABILITIES is not set
+ CONFIG_CRYPTO=y
+ CONFIG_CRYPTO_ALGAPI=m
++CONFIG_CRYPTO_AEAD=m
+ CONFIG_CRYPTO_BLKCIPHER=m
++# CONFIG_CRYPTO_SEQIV is not set
+ CONFIG_CRYPTO_HASH=m
+ CONFIG_CRYPTO_MANAGER=m
+ CONFIG_CRYPTO_HMAC=m
+@@ -1101,6 +1170,9 @@ CONFIG_CRYPTO_CBC=m
+ # CONFIG_CRYPTO_PCBC is not set
+ # CONFIG_CRYPTO_LRW is not set
+ # CONFIG_CRYPTO_XTS is not set
++# CONFIG_CRYPTO_CTR is not set
++# CONFIG_CRYPTO_GCM is not set
++# CONFIG_CRYPTO_CCM is not set
+ # CONFIG_CRYPTO_CRYPTD is not set
+ CONFIG_CRYPTO_DES=m
+ # CONFIG_CRYPTO_FCRYPT is not set
+@@ -1115,12 +1187,14 @@ CONFIG_CRYPTO_DES=m
+ # CONFIG_CRYPTO_KHAZAD is not set
+ # CONFIG_CRYPTO_ANUBIS is not set
+ # CONFIG_CRYPTO_SEED is not set
++# CONFIG_CRYPTO_SALSA20 is not set
+ CONFIG_CRYPTO_DEFLATE=m
+ # CONFIG_CRYPTO_MICHAEL_MIC is not set
+ # CONFIG_CRYPTO_CRC32C is not set
+ # CONFIG_CRYPTO_CAMELLIA is not set
+ # CONFIG_CRYPTO_TEST is not set
+-# CONFIG_CRYPTO_AUTHENC is not set
++CONFIG_CRYPTO_AUTHENC=m
++# CONFIG_CRYPTO_LZO is not set
+ # CONFIG_CRYPTO_HW is not set
+
+ #
+@@ -1135,6 +1209,7 @@ CONFIG_CRC7=m
+ # CONFIG_LIBCRC32C is not set
+ CONFIG_ZLIB_INFLATE=y
+ CONFIG_ZLIB_DEFLATE=y
++CONFIG_GENERIC_ALLOCATOR=y
+ CONFIG_PLIST=y
+ CONFIG_HAS_IOMEM=y
+ CONFIG_HAS_IOPORT=y
+--- a/arch/avr32/configs/atstk1003_defconfig
++++ b/arch/avr32/configs/atstk1003_defconfig
+@@ -1,7 +1,7 @@
+ #
+ # Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.24-rc7
+-# Wed Jan 9 22:54:34 2008
++# Linux kernel version: 2.6.25.4
++# Wed Jun 11 15:33:36 2008
+ #
+ CONFIG_AVR32=y
+ CONFIG_GENERIC_GPIO=y
+@@ -13,10 +13,10 @@ CONFIG_HARDIRQS_SW_RESEND=y
+ CONFIG_GENERIC_IRQ_PROBE=y
+ CONFIG_RWSEM_GENERIC_SPINLOCK=y
+ CONFIG_GENERIC_TIME=y
++CONFIG_GENERIC_CLOCKEVENTS=y
+ # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+ # CONFIG_ARCH_HAS_ILOG2_U32 is not set
+ # CONFIG_ARCH_HAS_ILOG2_U64 is not set
+-CONFIG_ARCH_SUPPORTS_OPROFILE=y
+ CONFIG_GENERIC_HWEIGHT=y
+ CONFIG_GENERIC_CALIBRATE_DELAY=y
+ CONFIG_GENERIC_BUG=y
+@@ -39,17 +39,15 @@ CONFIG_BSD_PROCESS_ACCT_V3=y
+ CONFIG_TASKSTATS=y
+ CONFIG_TASK_DELAY_ACCT=y
+ # CONFIG_TASK_XACCT is not set
+-# CONFIG_USER_NS is not set
+-# CONFIG_PID_NS is not set
+ CONFIG_AUDIT=y
+ # CONFIG_IKCONFIG is not set
+ CONFIG_LOG_BUF_SHIFT=14
+ # CONFIG_CGROUPS is not set
+-CONFIG_FAIR_GROUP_SCHED=y
+-CONFIG_FAIR_USER_SCHED=y
+-# CONFIG_FAIR_CGROUP_SCHED is not set
++# CONFIG_GROUP_SCHED is not set
+ CONFIG_SYSFS_DEPRECATED=y
++CONFIG_SYSFS_DEPRECATED_V2=y
+ CONFIG_RELAY=y
++# CONFIG_NAMESPACES is not set
+ CONFIG_BLK_DEV_INITRD=y
+ CONFIG_INITRAMFS_SOURCE=""
+ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+@@ -63,11 +61,13 @@ CONFIG_HOTPLUG=y
+ CONFIG_PRINTK=y
+ CONFIG_BUG=y
+ CONFIG_ELF_CORE=y
++# CONFIG_COMPAT_BRK is not set
+ # CONFIG_BASE_FULL is not set
+ CONFIG_FUTEX=y
+ CONFIG_ANON_INODES=y
+ CONFIG_EPOLL=y
+ CONFIG_SIGNALFD=y
++CONFIG_TIMERFD=y
+ CONFIG_EVENTFD=y
+ CONFIG_SHMEM=y
+ CONFIG_VM_EVENT_COUNTERS=y
+@@ -75,6 +75,14 @@ CONFIG_VM_EVENT_COUNTERS=y
+ # CONFIG_SLAB is not set
+ CONFIG_SLUB=y
+ # CONFIG_SLOB is not set
++CONFIG_PROFILING=y
++# CONFIG_MARKERS is not set
++CONFIG_OPROFILE=m
++CONFIG_HAVE_OPROFILE=y
++CONFIG_KPROBES=y
++CONFIG_HAVE_KPROBES=y
++# CONFIG_HAVE_KRETPROBES is not set
++CONFIG_PROC_PAGE_MONITOR=y
+ CONFIG_SLABINFO=y
+ CONFIG_RT_MUTEXES=y
+ # CONFIG_TINY_SHMEM is not set
+@@ -103,10 +111,15 @@ CONFIG_IOSCHED_CFQ=y
+ CONFIG_DEFAULT_CFQ=y
+ # CONFIG_DEFAULT_NOOP is not set
+ CONFIG_DEFAULT_IOSCHED="cfq"
++CONFIG_CLASSIC_RCU=y
+
+ #
+ # System Type and features
+ #
++CONFIG_TICK_ONESHOT=y
++CONFIG_NO_HZ=y
++CONFIG_HIGH_RES_TIMERS=y
++CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+ CONFIG_SUBARCH_AVR32B=y
+ CONFIG_MMU=y
+ CONFIG_PERFORMANCE_COUNTERS=y
+@@ -118,12 +131,16 @@ CONFIG_BOARD_ATSTK1000=y
+ # CONFIG_BOARD_ATSTK1002 is not set
+ CONFIG_BOARD_ATSTK1003=y
+ # CONFIG_BOARD_ATSTK1004 is not set
++# CONFIG_BOARD_ATSTK1006 is not set
+ # CONFIG_BOARD_ATSTK100X_CUSTOM is not set
+ # CONFIG_BOARD_ATSTK100X_SPI1 is not set
+ # CONFIG_BOARD_ATSTK1000_J2_LED is not set
+ # CONFIG_BOARD_ATSTK1000_J2_LED8 is not set
+ # CONFIG_BOARD_ATSTK1000_J2_RGB is not set
+ CONFIG_BOARD_ATSTK1000_EXTDAC=y
++# CONFIG_BOARD_ATSTK100X_ENABLE_AC97 is not set
++# CONFIG_BOARD_ATSTK1000_CF_HACKS is not set
++# CONFIG_BOARD_ATSTK100X_ENABLE_PSIF is not set
+ CONFIG_LOADER_U_BOOT=y
+
+ #
+@@ -132,6 +149,7 @@ CONFIG_LOADER_U_BOOT=y
+ # CONFIG_AP700X_32_BIT_SMC is not set
+ CONFIG_AP700X_16_BIT_SMC=y
+ # CONFIG_AP700X_8_BIT_SMC is not set
++CONFIG_GPIO_DEV=y
+ CONFIG_LOAD_ADDRESS=0x10000000
+ CONFIG_ENTRY_ADDRESS=0x90000000
+ CONFIG_PHYS_OFFSET=0x10000000
+@@ -157,16 +175,26 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
+ CONFIG_ZONE_DMA_FLAG=0
+ CONFIG_VIRT_TO_BUS=y
+ # CONFIG_OWNERSHIP_TRACE is not set
++CONFIG_NMI_DEBUGGING=y
++CONFIG_DW_DMAC=y
+ # CONFIG_HZ_100 is not set
+ CONFIG_HZ_250=y
+ # CONFIG_HZ_300 is not set
+ # CONFIG_HZ_1000 is not set
+ CONFIG_HZ=250
++# CONFIG_SCHED_HRTICK is not set
+ CONFIG_CMDLINE=""
+
+ #
+ # Power management options
+ #
++CONFIG_ARCH_SUSPEND_POSSIBLE=y
++CONFIG_PM=y
++# CONFIG_PM_LEGACY is not set
++# CONFIG_PM_DEBUG is not set
++CONFIG_PM_SLEEP=y
++CONFIG_SUSPEND=y
++CONFIG_SUSPEND_FREEZER=y
+
+ #
+ # CPU Frequency scaling
+@@ -175,9 +203,9 @@ CONFIG_CPU_FREQ=y
+ CONFIG_CPU_FREQ_TABLE=y
+ # CONFIG_CPU_FREQ_DEBUG is not set
+ # CONFIG_CPU_FREQ_STAT is not set
+-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
++# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+ # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
++CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
+ # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+ CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+ # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+@@ -260,6 +288,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
+ # CONFIG_NET_PKTGEN is not set
+ # CONFIG_NET_TCPPROBE is not set
+ # CONFIG_HAMRADIO is not set
++# CONFIG_CAN is not set
+ # CONFIG_IRDA is not set
+ # CONFIG_BT is not set
+ # CONFIG_AF_RXRPC is not set
+@@ -376,13 +405,18 @@ CONFIG_BLK_DEV_NBD=m
+ CONFIG_BLK_DEV_RAM=m
+ CONFIG_BLK_DEV_RAM_COUNT=16
+ CONFIG_BLK_DEV_RAM_SIZE=4096
+-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
++# CONFIG_BLK_DEV_XIP is not set
+ # CONFIG_CDROM_PKTCDVD is not set
+ # CONFIG_ATA_OVER_ETH is not set
+ CONFIG_MISC_DEVICES=y
++CONFIG_ATMEL_PWM=m
++CONFIG_ATMEL_TCLIB=y
++CONFIG_ATMEL_TCB_CLKSRC=y
++CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
+ # CONFIG_EEPROM_93CX6 is not set
+ CONFIG_ATMEL_SSC=m
+-# CONFIG_IDE is not set
++# CONFIG_ENCLOSURE_SERVICES is not set
++# CONFIG_HAVE_IDE is not set
+
+ #
+ # SCSI device support
+@@ -427,6 +461,7 @@ CONFIG_SCSI_LOWLEVEL=y
+ # CONFIG_SCSI_DEBUG is not set
+ CONFIG_ATA=m
+ # CONFIG_ATA_NONSTANDARD is not set
++# CONFIG_SATA_MV is not set
+ CONFIG_PATA_AT32=m
+ # CONFIG_PATA_PLATFORM is not set
+ # CONFIG_MD is not set
+@@ -460,7 +495,6 @@ CONFIG_PPP_BSDCOMP=m
+ # CONFIG_PPPOL2TP is not set
+ # CONFIG_SLIP is not set
+ CONFIG_SLHC=m
+-# CONFIG_SHAPER is not set
+ # CONFIG_NETCONSOLE is not set
+ # CONFIG_NETPOLL is not set
+ # CONFIG_NET_POLL_CONTROLLER is not set
+@@ -528,6 +562,7 @@ CONFIG_MOUSE_GPIO=m
+ #
+ CONFIG_SERIAL_ATMEL=y
+ CONFIG_SERIAL_ATMEL_CONSOLE=y
++CONFIG_SERIAL_ATMEL_PDC=y
+ # CONFIG_SERIAL_ATMEL_TTYAT is not set
+ CONFIG_SERIAL_CORE=y
+ CONFIG_SERIAL_CORE_CONSOLE=y
+@@ -535,8 +570,6 @@ CONFIG_UNIX98_PTYS=y
+ # CONFIG_LEGACY_PTYS is not set
+ # CONFIG_IPMI_HANDLER is not set
+ # CONFIG_HW_RANDOM is not set
+-# CONFIG_RTC is not set
+-# CONFIG_GEN_RTC is not set
+ # CONFIG_R3964 is not set
+ # CONFIG_RAW_DRIVER is not set
+ # CONFIG_TCG_TPM is not set
+@@ -554,6 +587,7 @@ CONFIG_I2C_ALGOBIT=m
+ #
+ # I2C Hardware Bus support
+ #
++CONFIG_I2C_ATMELTWI=m
+ CONFIG_I2C_GPIO=m
+ # CONFIG_I2C_OCORES is not set
+ # CONFIG_I2C_PARPORT_LIGHT is not set
+@@ -564,13 +598,12 @@ CONFIG_I2C_GPIO=m
+ #
+ # Miscellaneous I2C Chip support
+ #
+-# CONFIG_SENSORS_DS1337 is not set
+-# CONFIG_SENSORS_DS1374 is not set
+ # CONFIG_DS1682 is not set
+ # CONFIG_SENSORS_EEPROM is not set
+ # CONFIG_SENSORS_PCF8574 is not set
+-# CONFIG_SENSORS_PCA9539 is not set
++# CONFIG_PCF8575 is not set
+ # CONFIG_SENSORS_PCF8591 is not set
++# CONFIG_TPS65010 is not set
+ # CONFIG_SENSORS_MAX6875 is not set
+ # CONFIG_SENSORS_TSL2550 is not set
+ # CONFIG_I2C_DEBUG_CORE is not set
+@@ -597,9 +630,27 @@ CONFIG_SPI_ATMEL=y
+ # CONFIG_SPI_AT25 is not set
+ CONFIG_SPI_SPIDEV=m
+ # CONFIG_SPI_TLE62X0 is not set
++CONFIG_HAVE_GPIO_LIB=y
+
+#
-+# System on Chip audio support
++# GPIO Support
+#
-+# CONFIG_SND_SOC is not set
++# CONFIG_DEBUG_GPIO is not set
+
+#
-+# Open Sound System
++# I2C GPIO expanders:
+#
-+# CONFIG_SOUND_PRIME is not set
++# CONFIG_GPIO_PCA953X is not set
++# CONFIG_GPIO_PCF857X is not set
+
+#
-+# HID Devices
++# SPI GPIO expanders:
+#
-+# CONFIG_HID is not set
++# CONFIG_GPIO_MCP23S08 is not set
+ # CONFIG_W1 is not set
+ # CONFIG_POWER_SUPPLY is not set
+ # CONFIG_HWMON is not set
++# CONFIG_THERMAL is not set
+ CONFIG_WATCHDOG=y
+ # CONFIG_WATCHDOG_NOWAYOUT is not set
+@@ -665,12 +716,18 @@ CONFIG_SND_VERBOSE_PROCFS=y
#
- # USB support
-@@ -545,21 +751,59 @@ CONFIG_UNIX98_PTYS=y
+ # Generic devices
#
- # USB Gadget Support
++CONFIG_SND_AC97_CODEC=m
+ # CONFIG_SND_DUMMY is not set
+ # CONFIG_SND_MTPAV is not set
+ # CONFIG_SND_SERIAL_U16550 is not set
+ # CONFIG_SND_MPU401 is not set
+
#
--# CONFIG_USB_GADGET is not set
--# CONFIG_MMC is not set
-+CONFIG_USB_GADGET=y
-+# CONFIG_USB_GADGET_DEBUG_FILES is not set
-+CONFIG_USB_GADGET_SELECTED=y
-+# CONFIG_USB_GADGET_FSL_USB2 is not set
-+# CONFIG_USB_GADGET_NET2280 is not set
-+# CONFIG_USB_GADGET_PXA2XX is not set
-+# CONFIG_USB_GADGET_GOKU is not set
-+# CONFIG_USB_GADGET_LH7A40X is not set
-+CONFIG_USB_GADGET_ATMEL_USBA=y
-+CONFIG_USB_ATMEL_USBA=y
-+# CONFIG_USB_GADGET_OMAP is not set
-+# CONFIG_USB_GADGET_AT91 is not set
-+# CONFIG_USB_GADGET_DUMMY_HCD is not set
-+CONFIG_USB_GADGET_DUALSPEED=y
-+CONFIG_USB_ZERO=m
-+CONFIG_USB_ETH=m
-+CONFIG_USB_ETH_RNDIS=y
-+CONFIG_USB_GADGETFS=m
-+CONFIG_USB_FILE_STORAGE=m
-+# CONFIG_USB_FILE_STORAGE_TEST is not set
-+CONFIG_USB_G_SERIAL=m
-+# CONFIG_USB_MIDI_GADGET is not set
-+CONFIG_MMC=y
-+# CONFIG_MMC_DEBUG is not set
-+# CONFIG_MMC_UNSAFE_RESUME is not set
++# AVR32 devices
++#
++CONFIG_SND_ATMEL_AC97=m
+
+#
-+# MMC/SD Card Drivers
+ # SPI devices
+ #
+ CONFIG_SND_AT73C213=m
+@@ -686,9 +743,14 @@ CONFIG_SND_AT73C213_TARGET_BITRATE=48000
+ #
+
+ #
++# ALSA SoC audio for Freescale SOCs
+#
-+CONFIG_MMC_BLOCK=y
+
+#
-+# MMC/SD Host Controller Drivers
-+#
-+CONFIG_MMC_ATMELMCI=y
+ # Open Sound System
+ #
+ # CONFIG_SOUND_PRIME is not set
++CONFIG_AC97_BUS=m
+ # CONFIG_HID_SUPPORT is not set
+ CONFIG_USB_SUPPORT=y
+ # CONFIG_USB_ARCH_HAS_HCD is not set
+@@ -698,10 +760,6 @@ CONFIG_USB_SUPPORT=y
+ #
+ # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+ #
+-
+-#
+-# USB Gadget Support
+-#
+ CONFIG_USB_GADGET=y
+ # CONFIG_USB_GADGET_DEBUG is not set
+ # CONFIG_USB_GADGET_DEBUG_FILES is not set
+@@ -729,27 +787,31 @@ CONFIG_USB_FILE_STORAGE=m
+ # CONFIG_USB_FILE_STORAGE_TEST is not set
+ CONFIG_USB_G_SERIAL=m
+ # CONFIG_USB_MIDI_GADGET is not set
+-CONFIG_MMC=m
++# CONFIG_USB_G_PRINTER is not set
++CONFIG_MMC=y
+ # CONFIG_MMC_DEBUG is not set
+ # CONFIG_MMC_UNSAFE_RESUME is not set
#
- # LED devices
+ # MMC/SD Card Drivers
#
--# CONFIG_NEW_LEDS is not set
-+CONFIG_NEW_LEDS=y
-+CONFIG_LEDS_CLASS=m
+-CONFIG_MMC_BLOCK=m
++CONFIG_MMC_BLOCK=y
+ # CONFIG_MMC_BLOCK_BOUNCE is not set
+ # CONFIG_SDIO_UART is not set
#
- # LED drivers
+ # MMC/SD Host Controller Drivers
#
-+CONFIG_LEDS_GPIO=m
++CONFIG_MMC_ATMELMCI=y
+ CONFIG_MMC_SPI=m
++# CONFIG_MEMSTICK is not set
+ CONFIG_NEW_LEDS=y
+ CONFIG_LEDS_CLASS=y
#
- # LED Triggers
+ # LED drivers
#
-+CONFIG_LEDS_TRIGGERS=y
-+CONFIG_LEDS_TRIGGER_TIMER=m
-+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
++CONFIG_LEDS_ATMEL_PWM=m
+ CONFIG_LEDS_GPIO=y
#
- # InfiniBand support
-@@ -572,7 +816,50 @@ CONFIG_UNIX98_PTYS=y
+@@ -786,19 +848,22 @@ CONFIG_RTC_INTF_DEV=y
+ # CONFIG_RTC_DRV_PCF8563 is not set
+ # CONFIG_RTC_DRV_PCF8583 is not set
+ # CONFIG_RTC_DRV_M41T80 is not set
++# CONFIG_RTC_DRV_S35390A is not set
+
#
- # Real Time Clock
+ # SPI RTC drivers
#
--# CONFIG_RTC_CLASS is not set
-+CONFIG_RTC_LIB=y
-+CONFIG_RTC_CLASS=y
-+# CONFIG_RTC_HCTOSYS is not set
-+# CONFIG_RTC_DEBUG is not set
-+
-+#
-+# RTC interfaces
-+#
-+CONFIG_RTC_INTF_SYSFS=y
-+CONFIG_RTC_INTF_PROC=y
-+CONFIG_RTC_INTF_DEV=y
-+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-+# CONFIG_RTC_DRV_TEST is not set
-+
-+#
-+# I2C RTC drivers
-+#
-+# CONFIG_RTC_DRV_DS1307 is not set
-+# CONFIG_RTC_DRV_DS1672 is not set
-+# CONFIG_RTC_DRV_MAX6900 is not set
-+# CONFIG_RTC_DRV_RS5C372 is not set
-+# CONFIG_RTC_DRV_ISL1208 is not set
-+# CONFIG_RTC_DRV_X1205 is not set
-+# CONFIG_RTC_DRV_PCF8563 is not set
-+# CONFIG_RTC_DRV_PCF8583 is not set
-+
-+#
-+# SPI RTC drivers
-+#
+-# CONFIG_RTC_DRV_RS5C348 is not set
+ # CONFIG_RTC_DRV_MAX6902 is not set
++# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
-+# CONFIG_RTC_DRV_MAX6902 is not set
-+
-+#
-+# Platform RTC drivers
-+#
-+# CONFIG_RTC_DRV_DS1553 is not set
-+# CONFIG_RTC_DRV_DS1742 is not set
-+# CONFIG_RTC_DRV_M48T86 is not set
-+# CONFIG_RTC_DRV_V3020 is not set
-+
-+#
-+# on-CPU RTC drivers
-+#
-+CONFIG_RTC_DRV_AT32AP700X=y
#
- # DMA Engine support
-@@ -590,11 +877,14 @@ CONFIG_UNIX98_PTYS=y
+ # Platform RTC drivers
+ #
++# CONFIG_RTC_DRV_DS1511 is not set
+ # CONFIG_RTC_DRV_DS1553 is not set
+-# CONFIG_RTC_DRV_STK17TA8 is not set
+ # CONFIG_RTC_DRV_DS1742 is not set
++# CONFIG_RTC_DRV_STK17TA8 is not set
+ # CONFIG_RTC_DRV_M48T86 is not set
+ # CONFIG_RTC_DRV_M48T59 is not set
+ # CONFIG_RTC_DRV_V3020 is not set
+@@ -816,13 +881,13 @@ CONFIG_UIO=m
#
# File systems
#
+CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
--# CONFIG_EXT3_FS is not set
+-CONFIG_EXT3_FS=m
+CONFIG_EXT3_FS=y
-+# CONFIG_EXT3_FS_XATTR is not set
+ # CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4DEV_FS is not set
+-CONFIG_JBD=m
+CONFIG_JBD=y
-+# CONFIG_JBD_DEBUG is not set
+ # CONFIG_JBD_DEBUG is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
- # CONFIG_FS_POSIX_ACL is not set
-@@ -609,7 +899,7 @@ CONFIG_INOTIFY_USER=y
- # CONFIG_DNOTIFY is not set
+@@ -830,12 +895,10 @@ CONFIG_JBD=m
+ # CONFIG_XFS_FS is not set
+ # CONFIG_GFS2_FS is not set
+ # CONFIG_OCFS2_FS is not set
+-# CONFIG_MINIX_FS is not set
+-# CONFIG_ROMFS_FS is not set
++# CONFIG_DNOTIFY is not set
+ CONFIG_INOTIFY=y
+ CONFIG_INOTIFY_USER=y
+ # CONFIG_QUOTA is not set
+-# CONFIG_DNOTIFY is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
--# CONFIG_FUSE_FS is not set
-+CONFIG_FUSE_FS=m
-
- #
- # CD-ROM/DVD Filesystems
-@@ -638,7 +928,7 @@ CONFIG_TMPFS=y
+ CONFIG_FUSE_FS=m
+@@ -866,7 +929,7 @@ CONFIG_SYSFS=y
+ CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
- CONFIG_RAMFS=y
-CONFIG_CONFIGFS_FS=m
+CONFIG_CONFIGFS_FS=y
#
# Miscellaneous filesystems
-@@ -683,8 +973,14 @@ CONFIG_SUNRPC=y
- # CONFIG_SUNRPC_BIND34 is not set
- # CONFIG_RPCSEC_GSS_KRB5 is not set
- # CONFIG_RPCSEC_GSS_SPKM3 is not set
--# CONFIG_SMB_FS is not set
--# CONFIG_CIFS is not set
-+CONFIG_SMB_FS=m
-+# CONFIG_SMB_NLS_DEFAULT is not set
-+CONFIG_CIFS=m
-+# CONFIG_CIFS_STATS is not set
-+# CONFIG_CIFS_WEAK_PW_HASH is not set
-+# CONFIG_CIFS_XATTR is not set
-+# CONFIG_CIFS_DEBUG2 is not set
-+# CONFIG_CIFS_EXPERIMENTAL is not set
- # CONFIG_NCP_FS is not set
- # CONFIG_CODA_FS is not set
- # CONFIG_AFS_FS is not set
-diff --git a/arch/avr32/drivers/Makefile b/arch/avr32/drivers/Makefile
-new file mode 100644
-index 0000000..b429b75
---- /dev/null
-+++ b/arch/avr32/drivers/Makefile
-@@ -0,0 +1 @@
-+obj-$(CONFIG_DW_DMAC) += dw-dmac.o
-diff --git a/arch/avr32/drivers/dw-dmac.c b/arch/avr32/drivers/dw-dmac.c
-new file mode 100644
-index 0000000..224eb30
---- /dev/null
-+++ b/arch/avr32/drivers/dw-dmac.c
-@@ -0,0 +1,761 @@
-+/*
-+ * Driver for the Synopsys DesignWare DMA Controller
-+ *
-+ * Copyright (C) 2005-2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#include <linux/clk.h>
-+#include <linux/device.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/dmapool.h>
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+
-+#include <asm/dma-controller.h>
-+#include <asm/io.h>
-+
-+#include "dw-dmac.h"
-+
-+#define DMAC_NR_CHANNELS 3
-+#define DMAC_MAX_BLOCKSIZE 4095
-+
-+enum {
-+ CH_STATE_FREE = 0,
-+ CH_STATE_ALLOCATED,
-+ CH_STATE_BUSY,
-+};
-+
-+struct dw_dma_lli {
-+ dma_addr_t sar;
-+ dma_addr_t dar;
-+ dma_addr_t llp;
-+ u32 ctllo;
-+ u32 ctlhi;
-+ u32 sstat;
-+ u32 dstat;
-+};
-+
-+struct dw_dma_block {
-+ struct dw_dma_lli *lli_vaddr;
-+ dma_addr_t lli_dma_addr;
-+};
+@@ -891,8 +954,10 @@ CONFIG_JFFS2_RTIME=y
+ # CONFIG_JFFS2_RUBIN is not set
+ # CONFIG_CRAMFS is not set
+ # CONFIG_VXFS_FS is not set
++# CONFIG_MINIX_FS is not set
+ # CONFIG_HPFS_FS is not set
+ # CONFIG_QNX4FS_FS is not set
++# CONFIG_ROMFS_FS is not set
+ # CONFIG_SYSV_FS is not set
+ # CONFIG_UFS_FS is not set
+ # CONFIG_NETWORK_FILESYSTEMS is not set
+@@ -943,11 +1008,6 @@ CONFIG_NLS_ISO8859_1=m
+ # CONFIG_NLS_KOI8_U is not set
+ CONFIG_NLS_UTF8=m
+ # CONFIG_DLM is not set
+-CONFIG_INSTRUMENTATION=y
+-CONFIG_PROFILING=y
+-CONFIG_OPROFILE=m
+-CONFIG_KPROBES=y
+-# CONFIG_MARKERS is not set
+
+ #
+ # Kernel hacking
+@@ -965,6 +1025,7 @@ CONFIG_DETECT_SOFTLOCKUP=y
+ CONFIG_SCHED_DEBUG=y
+ # CONFIG_SCHEDSTATS is not set
+ # CONFIG_TIMER_STATS is not set
++# CONFIG_SLUB_STATS is not set
+ # CONFIG_DEBUG_RT_MUTEXES is not set
+ # CONFIG_RT_MUTEX_TESTER is not set
+ # CONFIG_DEBUG_SPINLOCK is not set
+@@ -981,9 +1042,10 @@ CONFIG_DEBUG_BUGVERBOSE=y
+ # CONFIG_DEBUG_LIST is not set
+ # CONFIG_DEBUG_SG is not set
+ CONFIG_FRAME_POINTER=y
+-CONFIG_FORCED_INLINING=y
+ # CONFIG_BOOT_PRINTK_DELAY is not set
+ # CONFIG_RCU_TORTURE_TEST is not set
++# CONFIG_KPROBES_SANITY_TEST is not set
++# CONFIG_BACKTRACE_SELF_TEST is not set
+ # CONFIG_LKDTM is not set
+ # CONFIG_FAULT_INJECTION is not set
+ # CONFIG_SAMPLES is not set
+@@ -1009,6 +1071,7 @@ CONFIG_CRC7=m
+ CONFIG_AUDIT_GENERIC=y
+ CONFIG_ZLIB_INFLATE=y
+ CONFIG_ZLIB_DEFLATE=y
++CONFIG_GENERIC_ALLOCATOR=y
+ CONFIG_PLIST=y
+ CONFIG_HAS_IOMEM=y
+ CONFIG_HAS_IOPORT=y
+--- a/arch/avr32/configs/atstk1004_defconfig
++++ b/arch/avr32/configs/atstk1004_defconfig
+@@ -1,7 +1,7 @@
+ #
+ # Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.24-rc7
+-# Wed Jan 9 23:04:20 2008
++# Linux kernel version: 2.6.25.4
++# Wed Jun 11 15:37:49 2008
+ #
+ CONFIG_AVR32=y
+ CONFIG_GENERIC_GPIO=y
+@@ -13,10 +13,10 @@ CONFIG_HARDIRQS_SW_RESEND=y
+ CONFIG_GENERIC_IRQ_PROBE=y
+ CONFIG_RWSEM_GENERIC_SPINLOCK=y
+ CONFIG_GENERIC_TIME=y
++CONFIG_GENERIC_CLOCKEVENTS=y
+ # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+ # CONFIG_ARCH_HAS_ILOG2_U32 is not set
+ # CONFIG_ARCH_HAS_ILOG2_U64 is not set
+-CONFIG_ARCH_SUPPORTS_OPROFILE=y
+ CONFIG_GENERIC_HWEIGHT=y
+ CONFIG_GENERIC_CALIBRATE_DELAY=y
+ CONFIG_GENERIC_BUG=y
+@@ -34,15 +34,15 @@ CONFIG_LOCALVERSION=""
+ # CONFIG_POSIX_MQUEUE is not set
+ # CONFIG_BSD_PROCESS_ACCT is not set
+ # CONFIG_TASKSTATS is not set
+-# CONFIG_USER_NS is not set
+-# CONFIG_PID_NS is not set
+ # CONFIG_AUDIT is not set
+ # CONFIG_IKCONFIG is not set
+ CONFIG_LOG_BUF_SHIFT=14
+ # CONFIG_CGROUPS is not set
+-# CONFIG_FAIR_GROUP_SCHED is not set
++# CONFIG_GROUP_SCHED is not set
+ CONFIG_SYSFS_DEPRECATED=y
++CONFIG_SYSFS_DEPRECATED_V2=y
+ # CONFIG_RELAY is not set
++# CONFIG_NAMESPACES is not set
+ # CONFIG_BLK_DEV_INITRD is not set
+ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+ CONFIG_SYSCTL=y
+@@ -54,24 +54,37 @@ CONFIG_HOTPLUG=y
+ CONFIG_PRINTK=y
+ CONFIG_BUG=y
+ CONFIG_ELF_CORE=y
++# CONFIG_COMPAT_BRK is not set
+ # CONFIG_BASE_FULL is not set
+ # CONFIG_FUTEX is not set
+ # CONFIG_EPOLL is not set
+ # CONFIG_SIGNALFD is not set
++# CONFIG_TIMERFD is not set
+ # CONFIG_EVENTFD is not set
+ CONFIG_SHMEM=y
+ CONFIG_VM_EVENT_COUNTERS=y
+ # CONFIG_SLAB is not set
+ # CONFIG_SLUB is not set
+ CONFIG_SLOB=y
++# CONFIG_PROFILING is not set
++# CONFIG_MARKERS is not set
++CONFIG_HAVE_OPROFILE=y
++CONFIG_HAVE_KPROBES=y
++# CONFIG_HAVE_KRETPROBES is not set
++# CONFIG_PROC_PAGE_MONITOR is not set
+ # CONFIG_TINY_SHMEM is not set
+ CONFIG_BASE_SMALL=1
+ # CONFIG_MODULES is not set
+ # CONFIG_BLOCK is not set
++CONFIG_CLASSIC_RCU=y
+
+ #
+ # System Type and features
+ #
++# CONFIG_TICK_ONESHOT is not set
++# CONFIG_NO_HZ is not set
++# CONFIG_HIGH_RES_TIMERS is not set
++CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+ CONFIG_SUBARCH_AVR32B=y
+ CONFIG_MMU=y
+ CONFIG_PERFORMANCE_COUNTERS=y
+@@ -83,10 +96,14 @@ CONFIG_BOARD_ATSTK1000=y
+ # CONFIG_BOARD_ATSTK1002 is not set
+ # CONFIG_BOARD_ATSTK1003 is not set
+ CONFIG_BOARD_ATSTK1004=y
++# CONFIG_BOARD_ATSTK1006 is not set
+ # CONFIG_BOARD_ATSTK100X_CUSTOM is not set
+ # CONFIG_BOARD_ATSTK100X_SPI1 is not set
+ # CONFIG_BOARD_ATSTK1000_J2_LED is not set
+ CONFIG_BOARD_ATSTK1000_EXTDAC=y
++# CONFIG_BOARD_ATSTK100X_ENABLE_AC97 is not set
++# CONFIG_BOARD_ATSTK1000_CF_HACKS is not set
++# CONFIG_BOARD_ATSTK100X_ENABLE_PSIF is not set
+ CONFIG_LOADER_U_BOOT=y
+
+ #
+@@ -95,6 +112,7 @@ CONFIG_LOADER_U_BOOT=y
+ # CONFIG_AP700X_32_BIT_SMC is not set
+ CONFIG_AP700X_16_BIT_SMC=y
+ # CONFIG_AP700X_8_BIT_SMC is not set
++# CONFIG_GPIO_DEV is not set
+ CONFIG_LOAD_ADDRESS=0x10000000
+ CONFIG_ENTRY_ADDRESS=0x90000000
+ CONFIG_PHYS_OFFSET=0x10000000
+@@ -120,34 +138,26 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
+ CONFIG_ZONE_DMA_FLAG=0
+ CONFIG_VIRT_TO_BUS=y
+ # CONFIG_OWNERSHIP_TRACE is not set
++# CONFIG_NMI_DEBUGGING is not set
++CONFIG_DW_DMAC=y
+ # CONFIG_HZ_100 is not set
+ CONFIG_HZ_250=y
+ # CONFIG_HZ_300 is not set
+ # CONFIG_HZ_1000 is not set
+ CONFIG_HZ=250
++# CONFIG_SCHED_HRTICK is not set
+ CONFIG_CMDLINE=""
+
+ #
+ # Power management options
+ #
++CONFIG_ARCH_SUSPEND_POSSIBLE=y
++# CONFIG_PM is not set
+
+ #
+ # CPU Frequency scaling
+ #
+-CONFIG_CPU_FREQ=y
+-CONFIG_CPU_FREQ_TABLE=y
+-# CONFIG_CPU_FREQ_DEBUG is not set
+-# CONFIG_CPU_FREQ_STAT is not set
+-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+-CONFIG_CPU_FREQ_GOV_USERSPACE=y
+-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+-CONFIG_CPU_FREQ_AT32AP=y
++# CONFIG_CPU_FREQ is not set
+
+ #
+ # Bus options
+@@ -222,6 +232,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
+ #
+ # CONFIG_NET_PKTGEN is not set
+ # CONFIG_HAMRADIO is not set
++# CONFIG_CAN is not set
+ # CONFIG_IRDA is not set
+ # CONFIG_BT is not set
+ # CONFIG_AF_RXRPC is not set
+@@ -321,6 +332,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+ # CONFIG_MTD_UBI is not set
+ # CONFIG_PARPORT is not set
+ # CONFIG_MISC_DEVICES is not set
++# CONFIG_HAVE_IDE is not set
+
+ #
+ # SCSI device support
+@@ -358,6 +370,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+ #
+ CONFIG_SERIAL_ATMEL=y
+ CONFIG_SERIAL_ATMEL_CONSOLE=y
++# CONFIG_SERIAL_ATMEL_PDC is not set
+ # CONFIG_SERIAL_ATMEL_TTYAT is not set
+ CONFIG_SERIAL_CORE=y
+ CONFIG_SERIAL_CORE_CONSOLE=y
+@@ -365,8 +378,6 @@ CONFIG_UNIX98_PTYS=y
+ # CONFIG_LEGACY_PTYS is not set
+ # CONFIG_IPMI_HANDLER is not set
+ # CONFIG_HW_RANDOM is not set
+-# CONFIG_RTC is not set
+-# CONFIG_GEN_RTC is not set
+ # CONFIG_R3964 is not set
+ # CONFIG_TCG_TPM is not set
+ # CONFIG_I2C is not set
+@@ -389,9 +400,24 @@ CONFIG_SPI_ATMEL=y
+ # CONFIG_SPI_AT25 is not set
+ # CONFIG_SPI_SPIDEV is not set
+ # CONFIG_SPI_TLE62X0 is not set
++CONFIG_HAVE_GPIO_LIB=y
+
-+struct dw_dma_channel {
-+ unsigned int state;
-+ int is_cyclic;
-+ struct dma_request_sg *req_sg;
-+ struct dma_request_cyclic *req_cyclic;
-+ unsigned int nr_blocks;
-+ int direction;
-+ struct dw_dma_block *block;
-+};
++#
++# GPIO Support
++#
+
-+struct dw_dma_controller {
-+ spinlock_t lock;
-+ void * __iomem regs;
-+ struct dma_pool *lli_pool;
-+ struct clk *hclk;
-+ struct dma_controller dma;
-+ struct dw_dma_channel channel[DMAC_NR_CHANNELS];
-+};
-+#define to_dw_dmac(dmac) container_of(dmac, struct dw_dma_controller, dma)
++#
++# I2C GPIO expanders:
++#
+
-+#define dmac_writel_hi(dmac, reg, value) \
-+ __raw_writel((value), (dmac)->regs + DW_DMAC_##reg + 4)
-+#define dmac_readl_hi(dmac, reg) \
-+ __raw_readl((dmac)->regs + DW_DMAC_##reg + 4)
-+#define dmac_writel_lo(dmac, reg, value) \
-+ __raw_writel((value), (dmac)->regs + DW_DMAC_##reg)
-+#define dmac_readl_lo(dmac, reg) \
-+ __raw_readl((dmac)->regs + DW_DMAC_##reg)
-+#define dmac_chan_writel_hi(dmac, chan, reg, value) \
-+ __raw_writel((value), ((dmac)->regs + 0x58 * (chan) \
-+ + DW_DMAC_CHAN_##reg + 4))
-+#define dmac_chan_readl_hi(dmac, chan, reg) \
-+ __raw_readl((dmac)->regs + 0x58 * (chan) + DW_DMAC_CHAN_##reg + 4)
-+#define dmac_chan_writel_lo(dmac, chan, reg, value) \
-+ __raw_writel((value), (dmac)->regs + 0x58 * (chan) + DW_DMAC_CHAN_##reg)
-+#define dmac_chan_readl_lo(dmac, chan, reg) \
-+ __raw_readl((dmac)->regs + 0x58 * (chan) + DW_DMAC_CHAN_##reg)
-+#define set_channel_bit(dmac, reg, chan) \
-+ dmac_writel_lo(dmac, reg, (1 << (chan)) | (1 << ((chan) + 8)))
-+#define clear_channel_bit(dmac, reg, chan) \
-+ dmac_writel_lo(dmac, reg, (0 << (chan)) | (1 << ((chan) + 8)))
++#
++# SPI GPIO expanders:
++#
++# CONFIG_GPIO_MCP23S08 is not set
+ # CONFIG_W1 is not set
+ # CONFIG_POWER_SUPPLY is not set
+ # CONFIG_HWMON is not set
++# CONFIG_THERMAL is not set
+ CONFIG_WATCHDOG=y
+ # CONFIG_WATCHDOG_NOWAYOUT is not set
+
+@@ -471,10 +497,6 @@ CONFIG_USB_SUPPORT=y
+ #
+ # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+ #
+-
+-#
+-# USB Gadget Support
+-#
+ CONFIG_USB_GADGET=y
+ # CONFIG_USB_GADGET_DEBUG_FILES is not set
+ CONFIG_USB_GADGET_SELECTED=y
+@@ -499,7 +521,9 @@ CONFIG_USB_ETH=y
+ # CONFIG_USB_FILE_STORAGE is not set
+ # CONFIG_USB_G_SERIAL is not set
+ # CONFIG_USB_MIDI_GADGET is not set
++# CONFIG_USB_G_PRINTER is not set
+ # CONFIG_MMC is not set
++# CONFIG_MEMSTICK is not set
+ # CONFIG_NEW_LEDS is not set
+ CONFIG_RTC_LIB=y
+ CONFIG_RTC_CLASS=y
+@@ -519,15 +543,17 @@ CONFIG_RTC_INTF_DEV=y
+ #
+ # SPI RTC drivers
+ #
+-# CONFIG_RTC_DRV_RS5C348 is not set
+ # CONFIG_RTC_DRV_MAX6902 is not set
++# CONFIG_RTC_DRV_R9701 is not set
++# CONFIG_RTC_DRV_RS5C348 is not set
+
+ #
+ # Platform RTC drivers
+ #
++# CONFIG_RTC_DRV_DS1511 is not set
+ # CONFIG_RTC_DRV_DS1553 is not set
+-# CONFIG_RTC_DRV_STK17TA8 is not set
+ # CONFIG_RTC_DRV_DS1742 is not set
++# CONFIG_RTC_DRV_STK17TA8 is not set
+ # CONFIG_RTC_DRV_M48T86 is not set
+ # CONFIG_RTC_DRV_M48T59 is not set
+ # CONFIG_RTC_DRV_V3020 is not set
+@@ -545,9 +571,9 @@ CONFIG_RTC_DRV_AT32AP700X=y
+ #
+ # File systems
+ #
++# CONFIG_DNOTIFY is not set
+ # CONFIG_INOTIFY is not set
+ # CONFIG_QUOTA is not set
+-# CONFIG_DNOTIFY is not set
+ # CONFIG_AUTOFS_FS is not set
+ # CONFIG_AUTOFS4_FS is not set
+ # CONFIG_FUSE_FS is not set
+@@ -580,7 +606,6 @@ CONFIG_JFFS2_RTIME=y
+ # CONFIG_NETWORK_FILESYSTEMS is not set
+ # CONFIG_NLS is not set
+ # CONFIG_DLM is not set
+-# CONFIG_INSTRUMENTATION is not set
+
+ #
+ # Kernel hacking
+@@ -616,6 +641,7 @@ CONFIG_CRC32=y
+ # CONFIG_LIBCRC32C is not set
+ CONFIG_ZLIB_INFLATE=y
+ CONFIG_ZLIB_DEFLATE=y
++CONFIG_GENERIC_ALLOCATOR=y
+ CONFIG_HAS_IOMEM=y
+ CONFIG_HAS_IOPORT=y
+ CONFIG_HAS_DMA=y
+--- /dev/null
++++ b/arch/avr32/configs/atstk1006_defconfig
+@@ -0,0 +1,1235 @@
++#
++# Automatically generated make config: don't edit
++# Linux kernel version: 2.6.25.4
++# Wed Jun 11 15:40:45 2008
++#
++CONFIG_AVR32=y
++CONFIG_GENERIC_GPIO=y
++CONFIG_GENERIC_HARDIRQS=y
++CONFIG_STACKTRACE_SUPPORT=y
++CONFIG_LOCKDEP_SUPPORT=y
++CONFIG_TRACE_IRQFLAGS_SUPPORT=y
++CONFIG_HARDIRQS_SW_RESEND=y
++CONFIG_GENERIC_IRQ_PROBE=y
++CONFIG_RWSEM_GENERIC_SPINLOCK=y
++CONFIG_GENERIC_TIME=y
++CONFIG_GENERIC_CLOCKEVENTS=y
++# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
++# CONFIG_ARCH_HAS_ILOG2_U32 is not set
++# CONFIG_ARCH_HAS_ILOG2_U64 is not set
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_GENERIC_BUG=y
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
-+static int dmac_alloc_channel(struct dma_controller *_dmac)
-+{
-+ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
-+ struct dw_dma_channel *chan;
-+ unsigned long flags;
-+ int i;
++#
++# General setup
++#
++CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++CONFIG_LOCALVERSION=""
++# CONFIG_LOCALVERSION_AUTO is not set
++CONFIG_SWAP=y
++CONFIG_SYSVIPC=y
++CONFIG_SYSVIPC_SYSCTL=y
++CONFIG_POSIX_MQUEUE=y
++# CONFIG_BSD_PROCESS_ACCT is not set
++# CONFIG_TASKSTATS is not set
++# CONFIG_AUDIT is not set
++# CONFIG_IKCONFIG is not set
++CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_CGROUPS is not set
++# CONFIG_GROUP_SCHED is not set
++CONFIG_SYSFS_DEPRECATED=y
++CONFIG_SYSFS_DEPRECATED_V2=y
++CONFIG_RELAY=y
++# CONFIG_NAMESPACES is not set
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_INITRAMFS_SOURCE=""
++CONFIG_CC_OPTIMIZE_FOR_SIZE=y
++CONFIG_SYSCTL=y
++CONFIG_EMBEDDED=y
++# CONFIG_SYSCTL_SYSCALL is not set
++CONFIG_KALLSYMS=y
++# CONFIG_KALLSYMS_ALL is not set
++# CONFIG_KALLSYMS_EXTRA_PASS is not set
++CONFIG_HOTPLUG=y
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++CONFIG_ELF_CORE=y
++# CONFIG_COMPAT_BRK is not set
++# CONFIG_BASE_FULL is not set
++CONFIG_FUTEX=y
++CONFIG_ANON_INODES=y
++CONFIG_EPOLL=y
++CONFIG_SIGNALFD=y
++CONFIG_TIMERFD=y
++CONFIG_EVENTFD=y
++CONFIG_SHMEM=y
++CONFIG_VM_EVENT_COUNTERS=y
++CONFIG_SLUB_DEBUG=y
++# CONFIG_SLAB is not set
++CONFIG_SLUB=y
++# CONFIG_SLOB is not set
++CONFIG_PROFILING=y
++# CONFIG_MARKERS is not set
++CONFIG_OPROFILE=m
++CONFIG_HAVE_OPROFILE=y
++CONFIG_KPROBES=y
++CONFIG_HAVE_KPROBES=y
++# CONFIG_HAVE_KRETPROBES is not set
++CONFIG_PROC_PAGE_MONITOR=y
++CONFIG_SLABINFO=y
++CONFIG_RT_MUTEXES=y
++# CONFIG_TINY_SHMEM is not set
++CONFIG_BASE_SMALL=1
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++# CONFIG_MODULE_FORCE_UNLOAD is not set
++# CONFIG_MODVERSIONS is not set
++# CONFIG_MODULE_SRCVERSION_ALL is not set
++# CONFIG_KMOD is not set
++CONFIG_BLOCK=y
++# CONFIG_LBD is not set
++# CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_LSF is not set
++# CONFIG_BLK_DEV_BSG is not set
+
-+ spin_lock_irqsave(&dmac->lock, flags);
-+ for (i = 0; i < DMAC_NR_CHANNELS; i++)
-+ if (dmac->channel[i].state == CH_STATE_FREE)
-+ break;
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
++# CONFIG_IOSCHED_AS is not set
++# CONFIG_IOSCHED_DEADLINE is not set
++CONFIG_IOSCHED_CFQ=y
++# CONFIG_DEFAULT_AS is not set
++# CONFIG_DEFAULT_DEADLINE is not set
++CONFIG_DEFAULT_CFQ=y
++# CONFIG_DEFAULT_NOOP is not set
++CONFIG_DEFAULT_IOSCHED="cfq"
++CONFIG_CLASSIC_RCU=y
+
-+ if (i < DMAC_NR_CHANNELS) {
-+ chan = &dmac->channel[i];
-+ chan->state = CH_STATE_ALLOCATED;
-+ } else {
-+ i = -EBUSY;
-+ }
++#
++# System Type and features
++#
++CONFIG_TICK_ONESHOT=y
++CONFIG_NO_HZ=y
++CONFIG_HIGH_RES_TIMERS=y
++CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
++CONFIG_SUBARCH_AVR32B=y
++CONFIG_MMU=y
++CONFIG_PERFORMANCE_COUNTERS=y
++CONFIG_PLATFORM_AT32AP=y
++CONFIG_CPU_AT32AP700X=y
++CONFIG_CPU_AT32AP7000=y
++CONFIG_BOARD_ATSTK1000=y
++# CONFIG_BOARD_ATNGW100 is not set
++# CONFIG_BOARD_ATSTK1002 is not set
++# CONFIG_BOARD_ATSTK1003 is not set
++# CONFIG_BOARD_ATSTK1004 is not set
++CONFIG_BOARD_ATSTK1006=y
++# CONFIG_BOARD_ATSTK100X_CUSTOM is not set
++# CONFIG_BOARD_ATSTK100X_SPI1 is not set
++# CONFIG_BOARD_ATSTK1000_J2_LED is not set
++# CONFIG_BOARD_ATSTK1000_J2_LED8 is not set
++# CONFIG_BOARD_ATSTK1000_J2_RGB is not set
++CONFIG_BOARD_ATSTK1000_EXTDAC=y
++# CONFIG_BOARD_ATSTK100X_ENABLE_AC97 is not set
++# CONFIG_BOARD_ATSTK1000_CF_HACKS is not set
++# CONFIG_BOARD_ATSTK100X_ENABLE_PSIF is not set
++CONFIG_LOADER_U_BOOT=y
+
-+ spin_unlock_irqrestore(&dmac->lock, flags);
++#
++# Atmel AVR32 AP options
++#
++# CONFIG_AP700X_32_BIT_SMC is not set
++CONFIG_AP700X_16_BIT_SMC=y
++# CONFIG_AP700X_8_BIT_SMC is not set
++CONFIG_GPIO_DEV=y
++CONFIG_LOAD_ADDRESS=0x10000000
++CONFIG_ENTRY_ADDRESS=0x90000000
++CONFIG_PHYS_OFFSET=0x10000000
++CONFIG_PREEMPT_NONE=y
++# CONFIG_PREEMPT_VOLUNTARY is not set
++# CONFIG_PREEMPT is not set
++# CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
++# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
++# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
++CONFIG_ARCH_FLATMEM_ENABLE=y
++# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
++# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++# CONFIG_DISCONTIGMEM_MANUAL is not set
++# CONFIG_SPARSEMEM_MANUAL is not set
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++# CONFIG_SPARSEMEM_STATIC is not set
++# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
++CONFIG_SPLIT_PTLOCK_CPUS=4
++# CONFIG_RESOURCES_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=0
++CONFIG_VIRT_TO_BUS=y
++# CONFIG_OWNERSHIP_TRACE is not set
++CONFIG_NMI_DEBUGGING=y
++CONFIG_DW_DMAC=y
++# CONFIG_HZ_100 is not set
++CONFIG_HZ_250=y
++# CONFIG_HZ_300 is not set
++# CONFIG_HZ_1000 is not set
++CONFIG_HZ=250
++# CONFIG_SCHED_HRTICK is not set
++CONFIG_CMDLINE=""
+
-+ return i;
-+}
++#
++# Power management options
++#
++CONFIG_ARCH_SUSPEND_POSSIBLE=y
++CONFIG_PM=y
++# CONFIG_PM_LEGACY is not set
++# CONFIG_PM_DEBUG is not set
++CONFIG_PM_SLEEP=y
++CONFIG_SUSPEND=y
++CONFIG_SUSPEND_FREEZER=y
+
-+static void dmac_release_channel(struct dma_controller *_dmac, int channel)
-+{
-+ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
++#
++# CPU Frequency scaling
++#
++CONFIG_CPU_FREQ=y
++CONFIG_CPU_FREQ_TABLE=y
++# CONFIG_CPU_FREQ_DEBUG is not set
++# CONFIG_CPU_FREQ_STAT is not set
++# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
++# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
++CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
++# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
++CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
++# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
++CONFIG_CPU_FREQ_GOV_USERSPACE=y
++CONFIG_CPU_FREQ_GOV_ONDEMAND=y
++# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
++CONFIG_CPU_FREQ_AT32AP=y
+
-+ BUG_ON(channel >= DMAC_NR_CHANNELS
-+ || dmac->channel[channel].state != CH_STATE_ALLOCATED);
++#
++# Bus options
++#
++# CONFIG_ARCH_SUPPORTS_MSI is not set
++# CONFIG_PCCARD is not set
+
-+ dmac->channel[channel].state = CH_STATE_FREE;
-+}
++#
++# Executable file formats
++#
++CONFIG_BINFMT_ELF=y
++# CONFIG_BINFMT_MISC is not set
+
-+static struct dw_dma_block *allocate_blocks(struct dw_dma_controller *dmac,
-+ unsigned int nr_blocks)
-+{
-+ struct dw_dma_block *block;
-+ void *p;
-+ unsigned int i;
++#
++# Networking
++#
++CONFIG_NET=y
+
-+ block = kmalloc(nr_blocks * sizeof(*block),
-+ GFP_KERNEL);
-+ if (unlikely(!block))
-+ return NULL;
++#
++# Networking options
++#
++CONFIG_PACKET=y
++CONFIG_PACKET_MMAP=y
++CONFIG_UNIX=y
++CONFIG_XFRM=y
++CONFIG_XFRM_USER=m
++# CONFIG_XFRM_SUB_POLICY is not set
++# CONFIG_XFRM_MIGRATE is not set
++# CONFIG_XFRM_STATISTICS is not set
++CONFIG_NET_KEY=m
++# CONFIG_NET_KEY_MIGRATE is not set
++CONFIG_INET=y
++# CONFIG_IP_MULTICAST is not set
++# CONFIG_IP_ADVANCED_ROUTER is not set
++CONFIG_IP_FIB_HASH=y
++CONFIG_IP_PNP=y
++CONFIG_IP_PNP_DHCP=y
++# CONFIG_IP_PNP_BOOTP is not set
++# CONFIG_IP_PNP_RARP is not set
++CONFIG_NET_IPIP=m
++CONFIG_NET_IPGRE=m
++# CONFIG_ARPD is not set
++# CONFIG_SYN_COOKIES is not set
++CONFIG_INET_AH=m
++CONFIG_INET_ESP=m
++# CONFIG_INET_IPCOMP is not set
++# CONFIG_INET_XFRM_TUNNEL is not set
++CONFIG_INET_TUNNEL=m
++CONFIG_INET_XFRM_MODE_TRANSPORT=m
++CONFIG_INET_XFRM_MODE_TUNNEL=m
++CONFIG_INET_XFRM_MODE_BEET=m
++# CONFIG_INET_LRO is not set
++CONFIG_INET_DIAG=y
++CONFIG_INET_TCP_DIAG=y
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
++CONFIG_IPV6=m
++# CONFIG_IPV6_PRIVACY is not set
++# CONFIG_IPV6_ROUTER_PREF is not set
++# CONFIG_IPV6_OPTIMISTIC_DAD is not set
++CONFIG_INET6_AH=m
++CONFIG_INET6_ESP=m
++CONFIG_INET6_IPCOMP=m
++# CONFIG_IPV6_MIP6 is not set
++CONFIG_INET6_XFRM_TUNNEL=m
++CONFIG_INET6_TUNNEL=m
++CONFIG_INET6_XFRM_MODE_TRANSPORT=m
++CONFIG_INET6_XFRM_MODE_TUNNEL=m
++CONFIG_INET6_XFRM_MODE_BEET=m
++# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
++CONFIG_IPV6_SIT=m
++CONFIG_IPV6_TUNNEL=m
++# CONFIG_IPV6_MULTIPLE_TABLES is not set
++# CONFIG_NETWORK_SECMARK is not set
++# CONFIG_NETFILTER is not set
++# CONFIG_IP_DCCP is not set
++# CONFIG_IP_SCTP is not set
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++CONFIG_BRIDGE=m
++# CONFIG_VLAN_8021Q is not set
++# CONFIG_DECNET is not set
++CONFIG_LLC=m
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++# CONFIG_NET_SCHED is not set
+
-+ for (i = 0; i < nr_blocks; i++) {
-+ p = dma_pool_alloc(dmac->lli_pool, GFP_KERNEL,
-+ &block[i].lli_dma_addr);
-+ block[i].lli_vaddr = p;
-+ if (unlikely(!p))
-+ goto fail;
-+ }
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_NET_TCPPROBE is not set
++# CONFIG_HAMRADIO is not set
++# CONFIG_CAN is not set
++# CONFIG_IRDA is not set
++# CONFIG_BT is not set
++# CONFIG_AF_RXRPC is not set
+
-+ return block;
++#
++# Wireless
++#
++# CONFIG_CFG80211 is not set
++# CONFIG_WIRELESS_EXT is not set
++# CONFIG_MAC80211 is not set
++# CONFIG_IEEE80211 is not set
++# CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
+
-+fail:
-+ for (i = 0; i < nr_blocks; i++) {
-+ if (!block[i].lli_vaddr)
-+ break;
-+ dma_pool_free(dmac->lli_pool, block[i].lli_vaddr,
-+ block[i].lli_dma_addr);
-+ }
-+ kfree(block);
-+ return NULL;
-+}
++#
++# Device Drivers
++#
+
-+static void cleanup_channel(struct dw_dma_controller *dmac,
-+ struct dw_dma_channel *chan)
-+{
-+ unsigned int i;
++#
++# Generic Driver Options
++#
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++CONFIG_STANDALONE=y
++# CONFIG_PREVENT_FIRMWARE_BUILD is not set
++# CONFIG_FW_LOADER is not set
++# CONFIG_DEBUG_DRIVER is not set
++# CONFIG_DEBUG_DEVRES is not set
++# CONFIG_SYS_HYPERVISOR is not set
++# CONFIG_CONNECTOR is not set
++CONFIG_MTD=y
++# CONFIG_MTD_DEBUG is not set
++# CONFIG_MTD_CONCAT is not set
++CONFIG_MTD_PARTITIONS=y
++# CONFIG_MTD_REDBOOT_PARTS is not set
++CONFIG_MTD_CMDLINE_PARTS=y
+
-+ if (chan->nr_blocks > 1) {
-+ for (i = 0; i < chan->nr_blocks; i++)
-+ dma_pool_free(dmac->lli_pool, chan->block[i].lli_vaddr,
-+ chan->block[i].lli_dma_addr);
-+ kfree(chan->block);
-+ }
++#
++# User Modules And Translation Layers
++#
++CONFIG_MTD_CHAR=y
++CONFIG_MTD_BLKDEVS=y
++CONFIG_MTD_BLOCK=y
++# CONFIG_FTL is not set
++# CONFIG_NFTL is not set
++# CONFIG_INFTL is not set
++# CONFIG_RFD_FTL is not set
++# CONFIG_SSFDC is not set
++# CONFIG_MTD_OOPS is not set
+
-+ chan->state = CH_STATE_ALLOCATED;
-+}
++#
++# RAM/ROM/Flash chip drivers
++#
++CONFIG_MTD_CFI=y
++# CONFIG_MTD_JEDECPROBE is not set
++CONFIG_MTD_GEN_PROBE=y
++# CONFIG_MTD_CFI_ADV_OPTIONS is not set
++CONFIG_MTD_MAP_BANK_WIDTH_1=y
++CONFIG_MTD_MAP_BANK_WIDTH_2=y
++CONFIG_MTD_MAP_BANK_WIDTH_4=y
++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
++CONFIG_MTD_CFI_I1=y
++CONFIG_MTD_CFI_I2=y
++# CONFIG_MTD_CFI_I4 is not set
++# CONFIG_MTD_CFI_I8 is not set
++# CONFIG_MTD_CFI_INTELEXT is not set
++CONFIG_MTD_CFI_AMDSTD=y
++# CONFIG_MTD_CFI_STAA is not set
++CONFIG_MTD_CFI_UTIL=y
++# CONFIG_MTD_RAM is not set
++# CONFIG_MTD_ROM is not set
++# CONFIG_MTD_ABSENT is not set
+
-+static int dmac_prepare_request_sg(struct dma_controller *_dmac,
-+ struct dma_request_sg *req)
-+{
-+ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
-+ struct dw_dma_channel *chan;
-+ unsigned long ctlhi, ctllo, cfghi, cfglo;
-+ unsigned long block_size;
-+ unsigned int nr_blocks;
-+ int ret, i, direction;
-+ unsigned long flags;
++#
++# Mapping drivers for chip access
++#
++# CONFIG_MTD_COMPLEX_MAPPINGS is not set
++CONFIG_MTD_PHYSMAP=y
++CONFIG_MTD_PHYSMAP_START=0x8000000
++CONFIG_MTD_PHYSMAP_LEN=0x0
++CONFIG_MTD_PHYSMAP_BANKWIDTH=2
++# CONFIG_MTD_PLATRAM is not set
+
-+ spin_lock_irqsave(&dmac->lock, flags);
++#
++# Self-contained MTD device drivers
++#
++CONFIG_MTD_DATAFLASH=m
++CONFIG_MTD_M25P80=m
++# CONFIG_MTD_SLRAM is not set
++# CONFIG_MTD_PHRAM is not set
++# CONFIG_MTD_MTDRAM is not set
++# CONFIG_MTD_BLOCK2MTD is not set
+
-+ ret = -EINVAL;
-+ if (req->req.channel >= DMAC_NR_CHANNELS
-+ || dmac->channel[req->req.channel].state != CH_STATE_ALLOCATED
-+ || req->block_size > DMAC_MAX_BLOCKSIZE) {
-+ spin_unlock_irqrestore(&dmac->lock, flags);
-+ return -EINVAL;
-+ }
++#
++# Disk-On-Chip Device Drivers
++#
++# CONFIG_MTD_DOC2000 is not set
++# CONFIG_MTD_DOC2001 is not set
++# CONFIG_MTD_DOC2001PLUS is not set
++CONFIG_MTD_NAND=y
++# CONFIG_MTD_NAND_VERIFY_WRITE is not set
++# CONFIG_MTD_NAND_ECC_SMC is not set
++# CONFIG_MTD_NAND_MUSEUM_IDS is not set
++CONFIG_MTD_NAND_IDS=y
++# CONFIG_MTD_NAND_DISKONCHIP is not set
++CONFIG_MTD_NAND_ATMEL=y
++CONFIG_MTD_NAND_ATMEL_ECC_HW=y
++# CONFIG_MTD_NAND_ATMEL_ECC_SOFT is not set
++# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
++# CONFIG_MTD_NAND_NANDSIM is not set
++# CONFIG_MTD_NAND_PLATFORM is not set
++# CONFIG_MTD_ONENAND is not set
+
-+ chan = &dmac->channel[req->req.channel];
-+ chan->state = CH_STATE_BUSY;
-+ chan->req_sg = req;
-+ chan->is_cyclic = 0;
-+
-+ /*
-+ * We have marked the channel as busy, so no need to keep the
-+ * lock as long as we only touch the channel-specific
-+ * registers
-+ */
-+ spin_unlock_irqrestore(&dmac->lock, flags);
++#
++# UBI - Unsorted block images
++#
++CONFIG_MTD_UBI=m
++CONFIG_MTD_UBI_WL_THRESHOLD=4096
++CONFIG_MTD_UBI_BEB_RESERVE=1
++CONFIG_MTD_UBI_GLUEBI=y
+
-+ /*
-+ * There may be limitations in the driver and/or the DMA
-+ * controller that prevents us from sending a whole
-+ * scatterlist item in one go. Taking this into account,
-+ * calculate the number of block transfers we need to set up.
-+ *
-+ * FIXME: Let the peripheral driver know about the maximum
-+ * block size we support. We really don't want to use a
-+ * different block size than what was suggested by the
-+ * peripheral.
-+ *
-+ * Each block will get its own Linked List Item (LLI) below.
-+ */
-+ block_size = req->block_size;
-+ nr_blocks = req->nr_blocks;
-+ pr_debug("block_size %lu, nr_blocks %u nr_sg = %u\n",
-+ block_size, nr_blocks, req->nr_sg);
++#
++# UBI debugging options
++#
++# CONFIG_MTD_UBI_DEBUG is not set
++# CONFIG_PARPORT is not set
++CONFIG_BLK_DEV=y
++# CONFIG_BLK_DEV_COW_COMMON is not set
++CONFIG_BLK_DEV_LOOP=m
++# CONFIG_BLK_DEV_CRYPTOLOOP is not set
++CONFIG_BLK_DEV_NBD=m
++CONFIG_BLK_DEV_RAM=m
++CONFIG_BLK_DEV_RAM_COUNT=16
++CONFIG_BLK_DEV_RAM_SIZE=4096
++# CONFIG_BLK_DEV_XIP is not set
++# CONFIG_CDROM_PKTCDVD is not set
++# CONFIG_ATA_OVER_ETH is not set
++CONFIG_MISC_DEVICES=y
++CONFIG_ATMEL_PWM=m
++CONFIG_ATMEL_TCLIB=y
++CONFIG_ATMEL_TCB_CLKSRC=y
++CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
++# CONFIG_EEPROM_93CX6 is not set
++CONFIG_ATMEL_SSC=m
++# CONFIG_ENCLOSURE_SERVICES is not set
++# CONFIG_HAVE_IDE is not set
+
-+ BUG_ON(nr_blocks == 0);
-+ chan->nr_blocks = nr_blocks;
++#
++# SCSI device support
++#
++# CONFIG_RAID_ATTRS is not set
++CONFIG_SCSI=m
++CONFIG_SCSI_DMA=y
++# CONFIG_SCSI_TGT is not set
++# CONFIG_SCSI_NETLINK is not set
++# CONFIG_SCSI_PROC_FS is not set
+
-+ ret = -EINVAL;
-+ cfglo = cfghi = 0;
-+ switch (req->direction) {
-+ case DMA_DIR_MEM_TO_PERIPH:
-+ direction = DMA_TO_DEVICE;
-+ cfghi = req->periph_id << (43 - 32);
-+ break;
++#
++# SCSI support type (disk, tape, CD-ROM)
++#
++CONFIG_BLK_DEV_SD=m
++# CONFIG_CHR_DEV_ST is not set
++# CONFIG_CHR_DEV_OSST is not set
++CONFIG_BLK_DEV_SR=m
++# CONFIG_BLK_DEV_SR_VENDOR is not set
++# CONFIG_CHR_DEV_SG is not set
++# CONFIG_CHR_DEV_SCH is not set
+
-+ case DMA_DIR_PERIPH_TO_MEM:
-+ direction = DMA_FROM_DEVICE;
-+ cfghi = req->periph_id << (39 - 32);
-+ break;
-+ default:
-+ goto out_unclaim_channel;
-+ }
++#
++# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
++#
++# CONFIG_SCSI_MULTI_LUN is not set
++# CONFIG_SCSI_CONSTANTS is not set
++# CONFIG_SCSI_LOGGING is not set
++# CONFIG_SCSI_SCAN_ASYNC is not set
++CONFIG_SCSI_WAIT_SCAN=m
+
-+ chan->direction = direction;
++#
++# SCSI Transports
++#
++# CONFIG_SCSI_SPI_ATTRS is not set
++# CONFIG_SCSI_FC_ATTRS is not set
++# CONFIG_SCSI_ISCSI_ATTRS is not set
++# CONFIG_SCSI_SAS_LIBSAS is not set
++# CONFIG_SCSI_SRP_ATTRS is not set
++# CONFIG_SCSI_LOWLEVEL is not set
++CONFIG_ATA=m
++# CONFIG_ATA_NONSTANDARD is not set
++# CONFIG_SATA_MV is not set
++CONFIG_PATA_AT32=m
++# CONFIG_PATA_PLATFORM is not set
++# CONFIG_MD is not set
++CONFIG_NETDEVICES=y
++# CONFIG_NETDEVICES_MULTIQUEUE is not set
++# CONFIG_DUMMY is not set
++# CONFIG_BONDING is not set
++# CONFIG_MACVLAN is not set
++# CONFIG_EQUALIZER is not set
++CONFIG_TUN=m
++# CONFIG_VETH is not set
++CONFIG_PHYLIB=y
+
-+ dmac_chan_writel_hi(dmac, req->req.channel, CFG, cfghi);
-+ dmac_chan_writel_lo(dmac, req->req.channel, CFG, cfglo);
++#
++# MII PHY device drivers
++#
++# CONFIG_MARVELL_PHY is not set
++# CONFIG_DAVICOM_PHY is not set
++# CONFIG_QSEMI_PHY is not set
++# CONFIG_LXT_PHY is not set
++# CONFIG_CICADA_PHY is not set
++# CONFIG_VITESSE_PHY is not set
++# CONFIG_SMSC_PHY is not set
++# CONFIG_BROADCOM_PHY is not set
++# CONFIG_ICPLUS_PHY is not set
++# CONFIG_REALTEK_PHY is not set
++# CONFIG_FIXED_PHY is not set
++# CONFIG_MDIO_BITBANG is not set
++CONFIG_NET_ETHERNET=y
++# CONFIG_MII is not set
++CONFIG_MACB=y
++# CONFIG_ENC28J60 is not set
++# CONFIG_IBM_NEW_EMAC_ZMII is not set
++# CONFIG_IBM_NEW_EMAC_RGMII is not set
++# CONFIG_IBM_NEW_EMAC_TAH is not set
++# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
++# CONFIG_B44 is not set
++# CONFIG_NETDEV_1000 is not set
++# CONFIG_NETDEV_10000 is not set
+
-+ ctlhi = block_size >> req->width;
-+ ctllo = ((req->direction << 20)
-+ // | (1 << 14) | (1 << 11) // source/dest burst trans len
-+ | (req->width << 4) | (req->width << 1)
-+ | (1 << 0)); // interrupt enable
++#
++# Wireless LAN
++#
++# CONFIG_WLAN_PRE80211 is not set
++# CONFIG_WLAN_80211 is not set
++# CONFIG_WAN is not set
++CONFIG_PPP=m
++# CONFIG_PPP_MULTILINK is not set
++# CONFIG_PPP_FILTER is not set
++CONFIG_PPP_ASYNC=m
++# CONFIG_PPP_SYNC_TTY is not set
++CONFIG_PPP_DEFLATE=m
++CONFIG_PPP_BSDCOMP=m
++# CONFIG_PPP_MPPE is not set
++# CONFIG_PPPOE is not set
++# CONFIG_PPPOL2TP is not set
++# CONFIG_SLIP is not set
++CONFIG_SLHC=m
++# CONFIG_NETCONSOLE is not set
++# CONFIG_NETPOLL is not set
++# CONFIG_NET_POLL_CONTROLLER is not set
++# CONFIG_ISDN is not set
++# CONFIG_PHONE is not set
+
-+ if (nr_blocks == 1) {
-+ /* Only one block: No need to use block chaining */
-+ if (direction == DMA_TO_DEVICE) {
-+ dmac_chan_writel_lo(dmac, req->req.channel, SAR,
-+ req->sg->dma_address);
-+ dmac_chan_writel_lo(dmac, req->req.channel, DAR,
-+ req->data_reg);
-+ ctllo |= 2 << 7; // no dst increment
-+ } else {
-+ dmac_chan_writel_lo(dmac, req->req.channel, SAR,
-+ req->data_reg);
-+ dmac_chan_writel_lo(dmac, req->req.channel, DAR,
-+ req->sg->dma_address);
-+ ctllo |= 2 << 9; // no src increment
-+ }
-+ dmac_chan_writel_lo(dmac, req->req.channel, CTL, ctllo);
-+ dmac_chan_writel_hi(dmac, req->req.channel, CTL, ctlhi);
-+ pr_debug("ctl hi:lo 0x%lx:%lx\n", ctlhi, ctllo);
-+ } else {
-+ struct dw_dma_lli *lli, *lli_prev = NULL;
-+ int j = 0, offset = 0;
++#
++# Input device support
++#
++CONFIG_INPUT=m
++# CONFIG_INPUT_FF_MEMLESS is not set
++CONFIG_INPUT_POLLDEV=m
+
-+ ret = -ENOMEM;
-+ chan->block = allocate_blocks(dmac, nr_blocks);
-+ if (!chan->block)
-+ goto out_unclaim_channel;
++#
++# Userland interfaces
++#
++CONFIG_INPUT_MOUSEDEV=m
++CONFIG_INPUT_MOUSEDEV_PSAUX=y
++CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
++CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
++# CONFIG_INPUT_JOYDEV is not set
++CONFIG_INPUT_EVDEV=m
++# CONFIG_INPUT_EVBUG is not set
+
-+ if (direction == DMA_TO_DEVICE)
-+ ctllo |= 1 << 28 | 1 << 27 | 2 << 7;
-+ else
-+ ctllo |= 1 << 28 | 1 << 27 | 2 << 9;
++#
++# Input Device Drivers
++#
++CONFIG_INPUT_KEYBOARD=y
++# CONFIG_KEYBOARD_ATKBD is not set
++# CONFIG_KEYBOARD_SUNKBD is not set
++# CONFIG_KEYBOARD_LKKBD is not set
++# CONFIG_KEYBOARD_XTKBD is not set
++# CONFIG_KEYBOARD_NEWTON is not set
++# CONFIG_KEYBOARD_STOWAWAY is not set
++CONFIG_KEYBOARD_GPIO=m
++CONFIG_INPUT_MOUSE=y
++# CONFIG_MOUSE_PS2 is not set
++# CONFIG_MOUSE_SERIAL is not set
++# CONFIG_MOUSE_VSXXXAA is not set
++CONFIG_MOUSE_GPIO=m
++# CONFIG_INPUT_JOYSTICK is not set
++# CONFIG_INPUT_TABLET is not set
++# CONFIG_INPUT_TOUCHSCREEN is not set
++# CONFIG_INPUT_MISC is not set
+
-+ /*
-+ * Map scatterlist items to blocks. One scatterlist
-+ * item may need more than one block for the reasons
-+ * mentioned above.
-+ */
-+ for (i = 0; i < nr_blocks; i++) {
-+ lli = chan->block[i].lli_vaddr;
-+ if (lli_prev) {
-+ lli_prev->llp = chan->block[i].lli_dma_addr;
-+ pr_debug("lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
-+ i - 1, chan->block[i - 1].lli_vaddr,
-+ chan->block[i - 1].lli_dma_addr,
-+ lli_prev->sar, lli_prev->dar, lli_prev->llp,
-+ lli_prev->ctllo, lli_prev->ctlhi);
-+ }
-+ lli->llp = 0;
-+ lli->ctllo = ctllo;
-+ lli->ctlhi = ctlhi;
-+ if (direction == DMA_TO_DEVICE) {
-+ lli->sar = req->sg[j].dma_address + offset;
-+ lli->dar = req->data_reg;
-+ } else {
-+ lli->sar = req->data_reg;
-+ lli->dar = req->sg[j].dma_address + offset;
-+ }
-+ lli_prev = lli;
++#
++# Hardware I/O ports
++#
++# CONFIG_SERIO is not set
++# CONFIG_GAMEPORT is not set
+
-+ offset += block_size;
-+ if (offset > req->sg[j].length) {
-+ j++;
-+ offset = 0;
-+ }
-+ }
++#
++# Character devices
++#
++# CONFIG_VT is not set
++# CONFIG_SERIAL_NONSTANDARD is not set
+
-+ pr_debug("lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
-+ i - 1, chan->block[i - 1].lli_vaddr,
-+ chan->block[i - 1].lli_dma_addr, lli_prev->sar,
-+ lli_prev->dar, lli_prev->llp,
-+ lli_prev->ctllo, lli_prev->ctlhi);
++#
++# Serial drivers
++#
++# CONFIG_SERIAL_8250 is not set
+
-+ /*
-+ * SAR, DAR and CTL are initialized from the LLI. We
-+ * only have to enable the LLI bits in CTL.
-+ */
-+ dmac_chan_writel_hi(dmac, req->req.channel, CTL, 0);
-+ dmac_chan_writel_lo(dmac, req->req.channel, LLP,
-+ chan->block[0].lli_dma_addr);
-+ dmac_chan_writel_lo(dmac, req->req.channel, CTL, 1 << 28 | 1 << 27);
-+ }
++#
++# Non-8250 serial port support
++#
++CONFIG_SERIAL_ATMEL=y
++CONFIG_SERIAL_ATMEL_CONSOLE=y
++CONFIG_SERIAL_ATMEL_PDC=y
++# CONFIG_SERIAL_ATMEL_TTYAT is not set
++CONFIG_SERIAL_CORE=y
++CONFIG_SERIAL_CORE_CONSOLE=y
++CONFIG_UNIX98_PTYS=y
++# CONFIG_LEGACY_PTYS is not set
++# CONFIG_IPMI_HANDLER is not set
++# CONFIG_HW_RANDOM is not set
++# CONFIG_R3964 is not set
++# CONFIG_RAW_DRIVER is not set
++# CONFIG_TCG_TPM is not set
++CONFIG_I2C=m
++CONFIG_I2C_BOARDINFO=y
++CONFIG_I2C_CHARDEV=m
+
-+ set_channel_bit(dmac, MASK_XFER, req->req.channel);
-+ set_channel_bit(dmac, MASK_ERROR, req->req.channel);
-+ if (req->req.block_complete)
-+ set_channel_bit(dmac, MASK_BLOCK, req->req.channel);
-+ else
-+ clear_channel_bit(dmac, MASK_BLOCK, req->req.channel);
++#
++# I2C Algorithms
++#
++CONFIG_I2C_ALGOBIT=m
++# CONFIG_I2C_ALGOPCF is not set
++# CONFIG_I2C_ALGOPCA is not set
+
-+ return 0;
++#
++# I2C Hardware Bus support
++#
++CONFIG_I2C_ATMELTWI=m
++CONFIG_I2C_GPIO=m
++# CONFIG_I2C_OCORES is not set
++# CONFIG_I2C_PARPORT_LIGHT is not set
++# CONFIG_I2C_SIMTEC is not set
++# CONFIG_I2C_TAOS_EVM is not set
++# CONFIG_I2C_STUB is not set
+
-+out_unclaim_channel:
-+ chan->state = CH_STATE_ALLOCATED;
-+ return ret;
-+}
++#
++# Miscellaneous I2C Chip support
++#
++# CONFIG_DS1682 is not set
++# CONFIG_SENSORS_EEPROM is not set
++# CONFIG_SENSORS_PCF8574 is not set
++# CONFIG_PCF8575 is not set
++# CONFIG_SENSORS_PCF8591 is not set
++# CONFIG_TPS65010 is not set
++# CONFIG_SENSORS_MAX6875 is not set
++# CONFIG_SENSORS_TSL2550 is not set
++# CONFIG_I2C_DEBUG_CORE is not set
++# CONFIG_I2C_DEBUG_ALGO is not set
++# CONFIG_I2C_DEBUG_BUS is not set
++# CONFIG_I2C_DEBUG_CHIP is not set
+
-+static int dmac_prepare_request_cyclic(struct dma_controller *_dmac,
-+ struct dma_request_cyclic *req)
-+{
-+ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
-+ struct dw_dma_channel *chan;
-+ unsigned long ctlhi, ctllo, cfghi, cfglo;
-+ unsigned long block_size;
-+ int ret, i, direction;
-+ unsigned long flags;
++#
++# SPI support
++#
++CONFIG_SPI=y
++# CONFIG_SPI_DEBUG is not set
++CONFIG_SPI_MASTER=y
+
-+ spin_lock_irqsave(&dmac->lock, flags);
++#
++# SPI Master Controller Drivers
++#
++CONFIG_SPI_ATMEL=y
++# CONFIG_SPI_BITBANG is not set
+
-+ block_size = (req->buffer_size/req->periods) >> req->width;
++#
++# SPI Protocol Masters
++#
++# CONFIG_SPI_AT25 is not set
++CONFIG_SPI_SPIDEV=m
++# CONFIG_SPI_TLE62X0 is not set
++CONFIG_HAVE_GPIO_LIB=y
+
-+ ret = -EINVAL;
-+ if (req->req.channel >= DMAC_NR_CHANNELS
-+ || dmac->channel[req->req.channel].state != CH_STATE_ALLOCATED
-+ || (req->periods == 0)
-+ || block_size > DMAC_MAX_BLOCKSIZE) {
-+ spin_unlock_irqrestore(&dmac->lock, flags);
-+ return -EINVAL;
-+ }
++#
++# GPIO Support
++#
++# CONFIG_DEBUG_GPIO is not set
+
-+ chan = &dmac->channel[req->req.channel];
-+ chan->state = CH_STATE_BUSY;
-+ chan->is_cyclic = 1;
-+ chan->req_cyclic = req;
++#
++# I2C GPIO expanders:
++#
++# CONFIG_GPIO_PCA953X is not set
++# CONFIG_GPIO_PCF857X is not set
+
-+ /*
-+ * We have marked the channel as busy, so no need to keep the
-+ * lock as long as we only touch the channel-specific
-+ * registers
-+ */
-+ spin_unlock_irqrestore(&dmac->lock, flags);
++#
++# SPI GPIO expanders:
++#
++# CONFIG_GPIO_MCP23S08 is not set
++# CONFIG_W1 is not set
++# CONFIG_POWER_SUPPLY is not set
++# CONFIG_HWMON is not set
++# CONFIG_THERMAL is not set
++CONFIG_WATCHDOG=y
++# CONFIG_WATCHDOG_NOWAYOUT is not set
+
-+ /*
-+ Setup
-+ */
-+ BUG_ON(req->buffer_size % req->periods);
-+ /* printk(KERN_INFO "block_size = %lu, periods = %u\n", block_size, req->periods); */
++#
++# Watchdog Device Drivers
++#
++# CONFIG_SOFT_WATCHDOG is not set
++CONFIG_AT32AP700X_WDT=y
+
-+ chan->nr_blocks = req->periods;
++#
++# Sonics Silicon Backplane
++#
++CONFIG_SSB_POSSIBLE=y
++# CONFIG_SSB is not set
+
-+ ret = -EINVAL;
-+ cfglo = cfghi = 0;
-+ switch (req->direction) {
-+ case DMA_DIR_MEM_TO_PERIPH:
-+ direction = DMA_TO_DEVICE;
-+ cfghi = req->periph_id << (43 - 32);
-+ break;
++#
++# Multifunction device drivers
++#
++# CONFIG_MFD_SM501 is not set
+
-+ case DMA_DIR_PERIPH_TO_MEM:
-+ direction = DMA_FROM_DEVICE;
-+ cfghi = req->periph_id << (39 - 32);
-+ break;
-+ default:
-+ goto out_unclaim_channel;
-+ }
++#
++# Multimedia devices
++#
++# CONFIG_VIDEO_DEV is not set
++# CONFIG_DVB_CORE is not set
++# CONFIG_DAB is not set
+
-+ chan->direction = direction;
++#
++# Graphics support
++#
++# CONFIG_VGASTATE is not set
++# CONFIG_VIDEO_OUTPUT_CONTROL is not set
++CONFIG_FB=y
++# CONFIG_FIRMWARE_EDID is not set
++# CONFIG_FB_DDC is not set
++CONFIG_FB_CFB_FILLRECT=y
++CONFIG_FB_CFB_COPYAREA=y
++CONFIG_FB_CFB_IMAGEBLIT=y
++# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
++# CONFIG_FB_SYS_FILLRECT is not set
++# CONFIG_FB_SYS_COPYAREA is not set
++# CONFIG_FB_SYS_IMAGEBLIT is not set
++# CONFIG_FB_SYS_FOPS is not set
++CONFIG_FB_DEFERRED_IO=y
++# CONFIG_FB_SVGALIB is not set
++# CONFIG_FB_MACMODES is not set
++# CONFIG_FB_BACKLIGHT is not set
++# CONFIG_FB_MODE_HELPERS is not set
++# CONFIG_FB_TILEBLITTING is not set
+
-+ dmac_chan_writel_hi(dmac, req->req.channel, CFG, cfghi);
-+ dmac_chan_writel_lo(dmac, req->req.channel, CFG, cfglo);
++#
++# Frame buffer hardware drivers
++#
++# CONFIG_FB_S1D13XXX is not set
++CONFIG_FB_ATMEL=y
++# CONFIG_FB_VIRTUAL is not set
++CONFIG_BACKLIGHT_LCD_SUPPORT=y
++CONFIG_LCD_CLASS_DEVICE=y
++CONFIG_LCD_LTV350QV=y
++# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
+
-+ ctlhi = block_size;
-+ ctllo = ((req->direction << 20)
-+ | (req->width << 4) | (req->width << 1)
-+ | (1 << 0)); // interrupt enable
++#
++# Display device support
++#
++# CONFIG_DISPLAY_SUPPORT is not set
++# CONFIG_LOGO is not set
+
-+ {
-+ struct dw_dma_lli *lli = NULL, *lli_prev = NULL;
++#
++# Sound
++#
++CONFIG_SOUND=m
+
-+ ret = -ENOMEM;
-+ chan->block = allocate_blocks(dmac, req->periods);
-+ if (!chan->block)
-+ goto out_unclaim_channel;
++#
++# Advanced Linux Sound Architecture
++#
++CONFIG_SND=m
++CONFIG_SND_TIMER=m
++CONFIG_SND_PCM=m
++# CONFIG_SND_SEQUENCER is not set
++CONFIG_SND_OSSEMUL=y
++CONFIG_SND_MIXER_OSS=m
++CONFIG_SND_PCM_OSS=m
++CONFIG_SND_PCM_OSS_PLUGINS=y
++# CONFIG_SND_DYNAMIC_MINORS is not set
++# CONFIG_SND_SUPPORT_OLD_API is not set
++# CONFIG_SND_VERBOSE_PROCFS is not set
++# CONFIG_SND_VERBOSE_PRINTK is not set
++# CONFIG_SND_DEBUG is not set
+
-+ if (direction == DMA_TO_DEVICE)
-+ ctllo |= 1 << 28 | 1 << 27 | 2 << 7;
-+ else
-+ ctllo |= 1 << 28 | 1 << 27 | 2 << 9;
++#
++# Generic devices
++#
++CONFIG_SND_AC97_CODEC=m
++# CONFIG_SND_DUMMY is not set
++# CONFIG_SND_MTPAV is not set
++# CONFIG_SND_SERIAL_U16550 is not set
++# CONFIG_SND_MPU401 is not set
+
-+ /*
-+ * Set up a linked list items where each period gets
-+ * an item. The linked list item for the last period
-+ * points back to the star of the buffer making a
-+ * cyclic buffer.
-+ */
-+ for (i = 0; i < req->periods; i++) {
-+ lli = chan->block[i].lli_vaddr;
-+ if (lli_prev) {
-+ lli_prev->llp = chan->block[i].lli_dma_addr;
-+ /* printk(KERN_INFO "lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
-+ i - 1, chan->block[i - 1].lli_vaddr,
-+ chan->block[i - 1].lli_dma_addr,
-+ lli_prev->sar, lli_prev->dar, lli_prev->llp,
-+ lli_prev->ctllo, lli_prev->ctlhi);*/
-+ }
-+ lli->llp = 0;
-+ lli->ctllo = ctllo;
-+ lli->ctlhi = ctlhi;
-+ if (direction == DMA_TO_DEVICE) {
-+ lli->sar = req->buffer_start + i*(block_size << req->width);
-+ lli->dar = req->data_reg;
-+ } else {
-+ lli->sar = req->data_reg;
-+ lli->dar = req->buffer_start + i*(block_size << req->width);
-+ }
-+ lli_prev = lli;
-+ }
-+ lli->llp = chan->block[0].lli_dma_addr;
++#
++# AVR32 devices
++#
++CONFIG_SND_ATMEL_AC97=m
+
-+ /*printk(KERN_INFO "lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
-+ i - 1, chan->block[i - 1].lli_vaddr,
-+ chan->block[i - 1].lli_dma_addr, lli_prev->sar,
-+ lli_prev->dar, lli_prev->llp,
-+ lli_prev->ctllo, lli_prev->ctlhi); */
++#
++# SPI devices
++#
++CONFIG_SND_AT73C213=m
++CONFIG_SND_AT73C213_TARGET_BITRATE=48000
+
-+ /*
-+ * SAR, DAR and CTL are initialized from the LLI. We
-+ * only have to enable the LLI bits in CTL.
-+ */
-+ dmac_chan_writel_lo(dmac, req->req.channel, LLP,
-+ chan->block[0].lli_dma_addr);
-+ dmac_chan_writel_lo(dmac, req->req.channel, CTL, 1 << 28 | 1 << 27);
-+ }
++#
++# System on Chip audio support
++#
++# CONFIG_SND_SOC is not set
+
-+ clear_channel_bit(dmac, MASK_XFER, req->req.channel);
-+ set_channel_bit(dmac, MASK_ERROR, req->req.channel);
-+ if (req->req.block_complete)
-+ set_channel_bit(dmac, MASK_BLOCK, req->req.channel);
-+ else
-+ clear_channel_bit(dmac, MASK_BLOCK, req->req.channel);
++#
++# SoC Audio support for SuperH
++#
+
-+ return 0;
++#
++# ALSA SoC audio for Freescale SOCs
++#
+
-+out_unclaim_channel:
-+ chan->state = CH_STATE_ALLOCATED;
-+ return ret;
-+}
++#
++# Open Sound System
++#
++# CONFIG_SOUND_PRIME is not set
++CONFIG_AC97_BUS=m
++# CONFIG_HID_SUPPORT is not set
++CONFIG_USB_SUPPORT=y
++# CONFIG_USB_ARCH_HAS_HCD is not set
++# CONFIG_USB_ARCH_HAS_OHCI is not set
++# CONFIG_USB_ARCH_HAS_EHCI is not set
+
-+static int dmac_start_request(struct dma_controller *_dmac,
-+ unsigned int channel)
-+{
-+ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
++#
++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
++#
++CONFIG_USB_GADGET=y
++# CONFIG_USB_GADGET_DEBUG is not set
++# CONFIG_USB_GADGET_DEBUG_FILES is not set
++# CONFIG_USB_GADGET_DEBUG_FS is not set
++CONFIG_USB_GADGET_SELECTED=y
++# CONFIG_USB_GADGET_AMD5536UDC is not set
++CONFIG_USB_GADGET_ATMEL_USBA=y
++CONFIG_USB_ATMEL_USBA=y
++# CONFIG_USB_GADGET_FSL_USB2 is not set
++# CONFIG_USB_GADGET_NET2280 is not set
++# CONFIG_USB_GADGET_PXA2XX is not set
++# CONFIG_USB_GADGET_M66592 is not set
++# CONFIG_USB_GADGET_GOKU is not set
++# CONFIG_USB_GADGET_LH7A40X is not set
++# CONFIG_USB_GADGET_OMAP is not set
++# CONFIG_USB_GADGET_S3C2410 is not set
++# CONFIG_USB_GADGET_AT91 is not set
++# CONFIG_USB_GADGET_DUMMY_HCD is not set
++CONFIG_USB_GADGET_DUALSPEED=y
++CONFIG_USB_ZERO=m
++CONFIG_USB_ETH=m
++CONFIG_USB_ETH_RNDIS=y
++CONFIG_USB_GADGETFS=m
++CONFIG_USB_FILE_STORAGE=m
++# CONFIG_USB_FILE_STORAGE_TEST is not set
++CONFIG_USB_G_SERIAL=m
++# CONFIG_USB_MIDI_GADGET is not set
++# CONFIG_USB_G_PRINTER is not set
++CONFIG_MMC=y
++# CONFIG_MMC_DEBUG is not set
++# CONFIG_MMC_UNSAFE_RESUME is not set
+
-+ BUG_ON(channel >= DMAC_NR_CHANNELS);
++#
++# MMC/SD Card Drivers
++#
++CONFIG_MMC_BLOCK=y
++CONFIG_MMC_BLOCK_BOUNCE=y
++# CONFIG_SDIO_UART is not set
+
-+ set_channel_bit(dmac, CH_EN, channel);
++#
++# MMC/SD Host Controller Drivers
++#
++CONFIG_MMC_ATMELMCI=y
++CONFIG_MMC_SPI=m
++# CONFIG_MEMSTICK is not set
++CONFIG_NEW_LEDS=y
++CONFIG_LEDS_CLASS=m
+
-+ return 0;
-+}
++#
++# LED drivers
++#
++CONFIG_LEDS_ATMEL_PWM=m
++CONFIG_LEDS_GPIO=m
+
-+static dma_addr_t dmac_get_current_pos(struct dma_controller *_dmac,
-+ unsigned int channel)
-+{
-+ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
-+ struct dw_dma_channel *chan;
-+ dma_addr_t current_pos;
++#
++# LED Triggers
++#
++CONFIG_LEDS_TRIGGERS=y
++CONFIG_LEDS_TRIGGER_TIMER=m
++CONFIG_LEDS_TRIGGER_HEARTBEAT=m
++CONFIG_RTC_LIB=y
++CONFIG_RTC_CLASS=y
++CONFIG_RTC_HCTOSYS=y
++CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
++# CONFIG_RTC_DEBUG is not set
+
-+ BUG_ON(channel >= DMAC_NR_CHANNELS);
++#
++# RTC interfaces
++#
++CONFIG_RTC_INTF_SYSFS=y
++CONFIG_RTC_INTF_PROC=y
++CONFIG_RTC_INTF_DEV=y
++# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
++# CONFIG_RTC_DRV_TEST is not set
+
-+ chan = &dmac->channel[channel];
++#
++# I2C RTC drivers
++#
++# CONFIG_RTC_DRV_DS1307 is not set
++# CONFIG_RTC_DRV_DS1374 is not set
++# CONFIG_RTC_DRV_DS1672 is not set
++# CONFIG_RTC_DRV_MAX6900 is not set
++# CONFIG_RTC_DRV_RS5C372 is not set
++# CONFIG_RTC_DRV_ISL1208 is not set
++# CONFIG_RTC_DRV_X1205 is not set
++# CONFIG_RTC_DRV_PCF8563 is not set
++# CONFIG_RTC_DRV_PCF8583 is not set
++# CONFIG_RTC_DRV_M41T80 is not set
++# CONFIG_RTC_DRV_S35390A is not set
+
-+ switch (chan->direction) {
-+ case DMA_TO_DEVICE:
-+ current_pos = dmac_chan_readl_lo(dmac, channel, SAR);
-+ break;
-+ case DMA_FROM_DEVICE:
-+ current_pos = dmac_chan_readl_lo(dmac, channel, DAR);
-+ break;
-+ default:
-+ return 0;
-+ }
++#
++# SPI RTC drivers
++#
++# CONFIG_RTC_DRV_MAX6902 is not set
++# CONFIG_RTC_DRV_R9701 is not set
++# CONFIG_RTC_DRV_RS5C348 is not set
+
++#
++# Platform RTC drivers
++#
++# CONFIG_RTC_DRV_DS1511 is not set
++# CONFIG_RTC_DRV_DS1553 is not set
++# CONFIG_RTC_DRV_DS1742 is not set
++# CONFIG_RTC_DRV_STK17TA8 is not set
++# CONFIG_RTC_DRV_M48T86 is not set
++# CONFIG_RTC_DRV_M48T59 is not set
++# CONFIG_RTC_DRV_V3020 is not set
+
-+ if (!current_pos) {
-+ if (chan->is_cyclic) {
-+ current_pos = chan->req_cyclic->buffer_start;
-+ } else {
-+ current_pos = chan->req_sg->sg->dma_address;
-+ }
-+ }
++#
++# on-CPU RTC drivers
++#
++CONFIG_RTC_DRV_AT32AP700X=y
+
-+ return current_pos;
-+}
++#
++# Userspace I/O
++#
++# CONFIG_UIO is not set
+
++#
++# File systems
++#
++CONFIG_EXT2_FS=y
++# CONFIG_EXT2_FS_XATTR is not set
++# CONFIG_EXT2_FS_XIP is not set
++CONFIG_EXT3_FS=y
++# CONFIG_EXT3_FS_XATTR is not set
++# CONFIG_EXT4DEV_FS is not set
++CONFIG_JBD=y
++# CONFIG_JBD_DEBUG is not set
++# CONFIG_REISERFS_FS is not set
++# CONFIG_JFS_FS is not set
++# CONFIG_FS_POSIX_ACL is not set
++# CONFIG_XFS_FS is not set
++# CONFIG_GFS2_FS is not set
++# CONFIG_OCFS2_FS is not set
++# CONFIG_DNOTIFY is not set
++CONFIG_INOTIFY=y
++CONFIG_INOTIFY_USER=y
++# CONFIG_QUOTA is not set
++# CONFIG_AUTOFS_FS is not set
++# CONFIG_AUTOFS4_FS is not set
++CONFIG_FUSE_FS=m
+
-+static int dmac_stop_request(struct dma_controller *_dmac,
-+ unsigned int channel)
-+{
-+ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
-+ struct dw_dma_channel *chan;
++#
++# CD-ROM/DVD Filesystems
++#
++# CONFIG_ISO9660_FS is not set
++# CONFIG_UDF_FS is not set
+
-+ BUG_ON(channel >= DMAC_NR_CHANNELS);
++#
++# DOS/FAT/NT Filesystems
++#
++CONFIG_FAT_FS=m
++CONFIG_MSDOS_FS=m
++CONFIG_VFAT_FS=m
++CONFIG_FAT_DEFAULT_CODEPAGE=437
++CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
++# CONFIG_NTFS_FS is not set
+
-+ chan = &dmac->channel[channel];
-+ pr_debug("stop: st%u s%08x d%08x l%08x ctl0x%08x:0x%08x\n",
-+ chan->state, dmac_chan_readl_lo(dmac, channel, SAR),
-+ dmac_chan_readl_lo(dmac, channel, DAR),
-+ dmac_chan_readl_lo(dmac, channel, LLP),
-+ dmac_chan_readl_hi(dmac, channel, CTL),
-+ dmac_chan_readl_lo(dmac, channel, CTL));
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++CONFIG_PROC_KCORE=y
++CONFIG_PROC_SYSCTL=y
++CONFIG_SYSFS=y
++CONFIG_TMPFS=y
++# CONFIG_TMPFS_POSIX_ACL is not set
++# CONFIG_HUGETLB_PAGE is not set
++CONFIG_CONFIGFS_FS=y
+
-+ if (chan->state == CH_STATE_BUSY) {
-+ clear_channel_bit(dmac, CH_EN, channel);
-+ cleanup_channel(dmac, &dmac->channel[channel]);
-+ }
++#
++# Miscellaneous filesystems
++#
++# CONFIG_ADFS_FS is not set
++# CONFIG_AFFS_FS is not set
++# CONFIG_HFS_FS is not set
++# CONFIG_HFSPLUS_FS is not set
++# CONFIG_BEFS_FS is not set
++# CONFIG_BFS_FS is not set
++# CONFIG_EFS_FS is not set
++CONFIG_JFFS2_FS=y
++CONFIG_JFFS2_FS_DEBUG=0
++# CONFIG_JFFS2_FS_WRITEBUFFER is not set
++# CONFIG_JFFS2_SUMMARY is not set
++# CONFIG_JFFS2_FS_XATTR is not set
++# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
++CONFIG_JFFS2_ZLIB=y
++# CONFIG_JFFS2_LZO is not set
++CONFIG_JFFS2_RTIME=y
++# CONFIG_JFFS2_RUBIN is not set
++# CONFIG_CRAMFS is not set
++# CONFIG_VXFS_FS is not set
++CONFIG_MINIX_FS=m
++# CONFIG_HPFS_FS is not set
++# CONFIG_QNX4FS_FS is not set
++# CONFIG_ROMFS_FS is not set
++# CONFIG_SYSV_FS is not set
++# CONFIG_UFS_FS is not set
++CONFIG_NETWORK_FILESYSTEMS=y
++CONFIG_NFS_FS=y
++CONFIG_NFS_V3=y
++# CONFIG_NFS_V3_ACL is not set
++# CONFIG_NFS_V4 is not set
++# CONFIG_NFS_DIRECTIO is not set
++# CONFIG_NFSD is not set
++CONFIG_ROOT_NFS=y
++CONFIG_LOCKD=y
++CONFIG_LOCKD_V4=y
++CONFIG_NFS_COMMON=y
++CONFIG_SUNRPC=y
++# CONFIG_SUNRPC_BIND34 is not set
++# CONFIG_RPCSEC_GSS_KRB5 is not set
++# CONFIG_RPCSEC_GSS_SPKM3 is not set
++# CONFIG_SMB_FS is not set
++# CONFIG_CIFS is not set
++# CONFIG_NCP_FS is not set
++# CONFIG_CODA_FS is not set
++# CONFIG_AFS_FS is not set
+
-+ return 0;
-+}
++#
++# Partition Types
++#
++# CONFIG_PARTITION_ADVANCED is not set
++CONFIG_MSDOS_PARTITION=y
++CONFIG_NLS=m
++CONFIG_NLS_DEFAULT="iso8859-1"
++CONFIG_NLS_CODEPAGE_437=m
++# CONFIG_NLS_CODEPAGE_737 is not set
++# CONFIG_NLS_CODEPAGE_775 is not set
++# CONFIG_NLS_CODEPAGE_850 is not set
++# CONFIG_NLS_CODEPAGE_852 is not set
++# CONFIG_NLS_CODEPAGE_855 is not set
++# CONFIG_NLS_CODEPAGE_857 is not set
++# CONFIG_NLS_CODEPAGE_860 is not set
++# CONFIG_NLS_CODEPAGE_861 is not set
++# CONFIG_NLS_CODEPAGE_862 is not set
++# CONFIG_NLS_CODEPAGE_863 is not set
++# CONFIG_NLS_CODEPAGE_864 is not set
++# CONFIG_NLS_CODEPAGE_865 is not set
++# CONFIG_NLS_CODEPAGE_866 is not set
++# CONFIG_NLS_CODEPAGE_869 is not set
++# CONFIG_NLS_CODEPAGE_936 is not set
++# CONFIG_NLS_CODEPAGE_950 is not set
++# CONFIG_NLS_CODEPAGE_932 is not set
++# CONFIG_NLS_CODEPAGE_949 is not set
++# CONFIG_NLS_CODEPAGE_874 is not set
++# CONFIG_NLS_ISO8859_8 is not set
++# CONFIG_NLS_CODEPAGE_1250 is not set
++# CONFIG_NLS_CODEPAGE_1251 is not set
++# CONFIG_NLS_ASCII is not set
++CONFIG_NLS_ISO8859_1=m
++# CONFIG_NLS_ISO8859_2 is not set
++# CONFIG_NLS_ISO8859_3 is not set
++# CONFIG_NLS_ISO8859_4 is not set
++# CONFIG_NLS_ISO8859_5 is not set
++# CONFIG_NLS_ISO8859_6 is not set
++# CONFIG_NLS_ISO8859_7 is not set
++# CONFIG_NLS_ISO8859_9 is not set
++# CONFIG_NLS_ISO8859_13 is not set
++# CONFIG_NLS_ISO8859_14 is not set
++# CONFIG_NLS_ISO8859_15 is not set
++# CONFIG_NLS_KOI8_R is not set
++# CONFIG_NLS_KOI8_U is not set
++CONFIG_NLS_UTF8=m
++# CONFIG_DLM is not set
+
++#
++# Kernel hacking
++#
++# CONFIG_PRINTK_TIME is not set
++CONFIG_ENABLE_WARN_DEPRECATED=y
++CONFIG_ENABLE_MUST_CHECK=y
++CONFIG_MAGIC_SYSRQ=y
++# CONFIG_UNUSED_SYMBOLS is not set
++CONFIG_DEBUG_FS=y
++# CONFIG_HEADERS_CHECK is not set
++CONFIG_DEBUG_KERNEL=y
++# CONFIG_DEBUG_SHIRQ is not set
++CONFIG_DETECT_SOFTLOCKUP=y
++CONFIG_SCHED_DEBUG=y
++# CONFIG_SCHEDSTATS is not set
++# CONFIG_TIMER_STATS is not set
++# CONFIG_SLUB_DEBUG_ON is not set
++# CONFIG_SLUB_STATS is not set
++# CONFIG_DEBUG_RT_MUTEXES is not set
++# CONFIG_RT_MUTEX_TESTER is not set
++# CONFIG_DEBUG_SPINLOCK is not set
++# CONFIG_DEBUG_MUTEXES is not set
++# CONFIG_DEBUG_LOCK_ALLOC is not set
++# CONFIG_PROVE_LOCKING is not set
++# CONFIG_LOCK_STAT is not set
++# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
++# CONFIG_DEBUG_KOBJECT is not set
++CONFIG_DEBUG_BUGVERBOSE=y
++# CONFIG_DEBUG_INFO is not set
++# CONFIG_DEBUG_VM is not set
++# CONFIG_DEBUG_LIST is not set
++# CONFIG_DEBUG_SG is not set
++CONFIG_FRAME_POINTER=y
++# CONFIG_BOOT_PRINTK_DELAY is not set
++# CONFIG_RCU_TORTURE_TEST is not set
++# CONFIG_KPROBES_SANITY_TEST is not set
++# CONFIG_BACKTRACE_SELF_TEST is not set
++# CONFIG_LKDTM is not set
++# CONFIG_FAULT_INJECTION is not set
++# CONFIG_SAMPLES is not set
+
-+static void dmac_block_complete(struct dw_dma_controller *dmac)
-+{
-+ struct dw_dma_channel *chan;
-+ unsigned long status, chanid;
++#
++# Security options
++#
++# CONFIG_KEYS is not set
++# CONFIG_SECURITY is not set
++# CONFIG_SECURITY_FILE_CAPABILITIES is not set
++CONFIG_CRYPTO=y
++CONFIG_CRYPTO_ALGAPI=m
++CONFIG_CRYPTO_AEAD=m
++CONFIG_CRYPTO_BLKCIPHER=m
++# CONFIG_CRYPTO_SEQIV is not set
++CONFIG_CRYPTO_HASH=m
++CONFIG_CRYPTO_MANAGER=m
++CONFIG_CRYPTO_HMAC=m
++# CONFIG_CRYPTO_XCBC is not set
++# CONFIG_CRYPTO_NULL is not set
++# CONFIG_CRYPTO_MD4 is not set
++CONFIG_CRYPTO_MD5=m
++CONFIG_CRYPTO_SHA1=m
++# CONFIG_CRYPTO_SHA256 is not set
++# CONFIG_CRYPTO_SHA512 is not set
++# CONFIG_CRYPTO_WP512 is not set
++# CONFIG_CRYPTO_TGR192 is not set
++# CONFIG_CRYPTO_GF128MUL is not set
++# CONFIG_CRYPTO_ECB is not set
++CONFIG_CRYPTO_CBC=m
++# CONFIG_CRYPTO_PCBC is not set
++# CONFIG_CRYPTO_LRW is not set
++# CONFIG_CRYPTO_XTS is not set
++# CONFIG_CRYPTO_CTR is not set
++# CONFIG_CRYPTO_GCM is not set
++# CONFIG_CRYPTO_CCM is not set
++# CONFIG_CRYPTO_CRYPTD is not set
++CONFIG_CRYPTO_DES=m
++# CONFIG_CRYPTO_FCRYPT is not set
++# CONFIG_CRYPTO_BLOWFISH is not set
++# CONFIG_CRYPTO_TWOFISH is not set
++# CONFIG_CRYPTO_SERPENT is not set
++# CONFIG_CRYPTO_AES is not set
++# CONFIG_CRYPTO_CAST5 is not set
++# CONFIG_CRYPTO_CAST6 is not set
++# CONFIG_CRYPTO_TEA is not set
++# CONFIG_CRYPTO_ARC4 is not set
++# CONFIG_CRYPTO_KHAZAD is not set
++# CONFIG_CRYPTO_ANUBIS is not set
++# CONFIG_CRYPTO_SEED is not set
++# CONFIG_CRYPTO_SALSA20 is not set
++CONFIG_CRYPTO_DEFLATE=m
++# CONFIG_CRYPTO_MICHAEL_MIC is not set
++# CONFIG_CRYPTO_CRC32C is not set
++# CONFIG_CRYPTO_CAMELLIA is not set
++# CONFIG_CRYPTO_TEST is not set
++CONFIG_CRYPTO_AUTHENC=m
++# CONFIG_CRYPTO_LZO is not set
++# CONFIG_CRYPTO_HW is not set
+
-+ status = dmac_readl_lo(dmac, STATUS_BLOCK);
++#
++# Library routines
++#
++CONFIG_BITREVERSE=y
++CONFIG_CRC_CCITT=m
++# CONFIG_CRC16 is not set
++CONFIG_CRC_ITU_T=m
++CONFIG_CRC32=y
++CONFIG_CRC7=m
++# CONFIG_LIBCRC32C is not set
++CONFIG_ZLIB_INFLATE=y
++CONFIG_ZLIB_DEFLATE=y
++CONFIG_GENERIC_ALLOCATOR=y
++CONFIG_PLIST=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
++CONFIG_HAS_DMA=y
+--- /dev/null
++++ b/arch/avr32/drivers/Makefile
+@@ -0,0 +1 @@
++obj-$(CONFIG_DW_DMAC) += dw-dmac.o
+--- /dev/null
++++ b/arch/avr32/drivers/dw-dmac.c
+@@ -0,0 +1,761 @@
++/*
++ * Driver for the Synopsys DesignWare DMA Controller
++ *
++ * Copyright (C) 2005-2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#include <linux/clk.h>
++#include <linux/device.h>
++#include <linux/dma-mapping.h>
++#include <linux/dmapool.h>
++#include <linux/init.h>
++#include <linux/interrupt.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
+
-+ while (status) {
-+ struct dma_request *req;
-+ chanid = __ffs(status);
-+ chan = &dmac->channel[chanid];
++#include <asm/dma-controller.h>
++#include <asm/io.h>
+
-+ if (chan->is_cyclic) {
-+ BUG_ON(!chan->req_cyclic
-+ || !chan->req_cyclic->req.block_complete);
-+ req = &chan->req_cyclic->req;
-+ } else {
-+ BUG_ON(!chan->req_sg || !chan->req_sg->req.block_complete);
-+ req = &chan->req_sg->req;
-+ }
-+ dmac_writel_lo(dmac, CLEAR_BLOCK, 1 << chanid);
-+ req->block_complete(req);
-+ status = dmac_readl_lo(dmac, STATUS_BLOCK);
-+ }
-+}
++#include "dw-dmac.h"
+
-+static void dmac_xfer_complete(struct dw_dma_controller *dmac)
-+{
-+ struct dw_dma_channel *chan;
-+ struct dma_request *req;
-+ unsigned long status, chanid;
++#define DMAC_NR_CHANNELS 3
++#define DMAC_MAX_BLOCKSIZE 4095
+
-+ status = dmac_readl_lo(dmac, STATUS_XFER);
++enum {
++ CH_STATE_FREE = 0,
++ CH_STATE_ALLOCATED,
++ CH_STATE_BUSY,
++};
+
-+ while (status) {
-+ chanid = __ffs(status);
-+ chan = &dmac->channel[chanid];
++struct dw_dma_lli {
++ dma_addr_t sar;
++ dma_addr_t dar;
++ dma_addr_t llp;
++ u32 ctllo;
++ u32 ctlhi;
++ u32 sstat;
++ u32 dstat;
++};
+
-+ dmac_writel_lo(dmac, CLEAR_XFER, 1 << chanid);
++struct dw_dma_block {
++ struct dw_dma_lli *lli_vaddr;
++ dma_addr_t lli_dma_addr;
++};
+
-+ req = &chan->req_sg->req;
-+ BUG_ON(!req);
-+ cleanup_channel(dmac, chan);
-+ if (req->xfer_complete)
-+ req->xfer_complete(req);
++struct dw_dma_channel {
++ unsigned int state;
++ int is_cyclic;
++ struct dma_request_sg *req_sg;
++ struct dma_request_cyclic *req_cyclic;
++ unsigned int nr_blocks;
++ int direction;
++ struct dw_dma_block *block;
++};
+
-+ status = dmac_readl_lo(dmac, STATUS_XFER);
-+ }
-+}
++struct dw_dma_controller {
++ spinlock_t lock;
++ void * __iomem regs;
++ struct dma_pool *lli_pool;
++ struct clk *hclk;
++ struct dma_controller dma;
++ struct dw_dma_channel channel[DMAC_NR_CHANNELS];
++};
++#define to_dw_dmac(dmac) container_of(dmac, struct dw_dma_controller, dma)
+
-+static void dmac_error(struct dw_dma_controller *dmac)
++#define dmac_writel_hi(dmac, reg, value) \
++ __raw_writel((value), (dmac)->regs + DW_DMAC_##reg + 4)
++#define dmac_readl_hi(dmac, reg) \
++ __raw_readl((dmac)->regs + DW_DMAC_##reg + 4)
++#define dmac_writel_lo(dmac, reg, value) \
++ __raw_writel((value), (dmac)->regs + DW_DMAC_##reg)
++#define dmac_readl_lo(dmac, reg) \
++ __raw_readl((dmac)->regs + DW_DMAC_##reg)
++#define dmac_chan_writel_hi(dmac, chan, reg, value) \
++ __raw_writel((value), ((dmac)->regs + 0x58 * (chan) \
++ + DW_DMAC_CHAN_##reg + 4))
++#define dmac_chan_readl_hi(dmac, chan, reg) \
++ __raw_readl((dmac)->regs + 0x58 * (chan) + DW_DMAC_CHAN_##reg + 4)
++#define dmac_chan_writel_lo(dmac, chan, reg, value) \
++ __raw_writel((value), (dmac)->regs + 0x58 * (chan) + DW_DMAC_CHAN_##reg)
++#define dmac_chan_readl_lo(dmac, chan, reg) \
++ __raw_readl((dmac)->regs + 0x58 * (chan) + DW_DMAC_CHAN_##reg)
++#define set_channel_bit(dmac, reg, chan) \
++ dmac_writel_lo(dmac, reg, (1 << (chan)) | (1 << ((chan) + 8)))
++#define clear_channel_bit(dmac, reg, chan) \
++ dmac_writel_lo(dmac, reg, (0 << (chan)) | (1 << ((chan) + 8)))
++
++static int dmac_alloc_channel(struct dma_controller *_dmac)
+{
++ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
+ struct dw_dma_channel *chan;
-+ unsigned long status, chanid;
-+
-+ status = dmac_readl_lo(dmac, STATUS_ERROR);
++ unsigned long flags;
++ int i;
+
-+ while (status) {
-+ struct dma_request *req;
++ spin_lock_irqsave(&dmac->lock, flags);
++ for (i = 0; i < DMAC_NR_CHANNELS; i++)
++ if (dmac->channel[i].state == CH_STATE_FREE)
++ break;
+
-+ chanid = __ffs(status);
-+ chan = &dmac->channel[chanid];
++ if (i < DMAC_NR_CHANNELS) {
++ chan = &dmac->channel[i];
++ chan->state = CH_STATE_ALLOCATED;
++ } else {
++ i = -EBUSY;
++ }
+
-+ dmac_writel_lo(dmac, CLEAR_ERROR, 1 << chanid);
-+ clear_channel_bit(dmac, CH_EN, chanid);
++ spin_unlock_irqrestore(&dmac->lock, flags);
+
-+ if (chan->is_cyclic) {
-+ BUG_ON(!chan->req_cyclic);
-+ req = &chan->req_cyclic->req;
-+ } else {
-+ BUG_ON(!chan->req_sg);
-+ req = &chan->req_sg->req;
-+ }
++ return i;
++}
+
-+ cleanup_channel(dmac, chan);
-+ if (req->error)
-+ req->error(req);
++static void dmac_release_channel(struct dma_controller *_dmac, int channel)
++{
++ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
+
-+ status = dmac_readl_lo(dmac, STATUS_XFER);
-+ }
++ BUG_ON(channel >= DMAC_NR_CHANNELS
++ || dmac->channel[channel].state != CH_STATE_ALLOCATED);
++
++ dmac->channel[channel].state = CH_STATE_FREE;
+}
+
-+static irqreturn_t dmac_interrupt(int irq, void *dev_id)
++static struct dw_dma_block *allocate_blocks(struct dw_dma_controller *dmac,
++ unsigned int nr_blocks)
+{
-+ struct dw_dma_controller *dmac = dev_id;
-+ unsigned long status;
-+ int ret = IRQ_NONE;
++ struct dw_dma_block *block;
++ void *p;
++ unsigned int i;
+
-+ spin_lock(&dmac->lock);
++ block = kmalloc(nr_blocks * sizeof(*block),
++ GFP_KERNEL);
++ if (unlikely(!block))
++ return NULL;
+
-+ status = dmac_readl_lo(dmac, STATUS_INT);
++ for (i = 0; i < nr_blocks; i++) {
++ p = dma_pool_alloc(dmac->lli_pool, GFP_KERNEL,
++ &block[i].lli_dma_addr);
++ block[i].lli_vaddr = p;
++ if (unlikely(!p))
++ goto fail;
++ }
+
-+ while (status) {
-+ ret = IRQ_HANDLED;
-+ if (status & 0x10)
-+ dmac_error(dmac);
-+ if (status & 0x02)
-+ dmac_block_complete(dmac);
-+ if (status & 0x01)
-+ dmac_xfer_complete(dmac);
++ return block;
+
-+ status = dmac_readl_lo(dmac, STATUS_INT);
++fail:
++ for (i = 0; i < nr_blocks; i++) {
++ if (!block[i].lli_vaddr)
++ break;
++ dma_pool_free(dmac->lli_pool, block[i].lli_vaddr,
++ block[i].lli_dma_addr);
+ }
-+
-+ spin_unlock(&dmac->lock);
-+ return ret;
++ kfree(block);
++ return NULL;
+}
+
-+static int __devinit dmac_probe(struct platform_device *pdev)
++static void cleanup_channel(struct dw_dma_controller *dmac,
++ struct dw_dma_channel *chan)
+{
-+ struct dw_dma_controller *dmac;
-+ struct resource *regs;
-+ int ret;
-+
-+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!regs)
-+ return -ENXIO;
-+
-+ dmac = kmalloc(sizeof(*dmac), GFP_KERNEL);
-+ if (!dmac)
-+ return -ENOMEM;
-+ memset(dmac, 0, sizeof(*dmac));
++ unsigned int i;
+
-+ dmac->hclk = clk_get(&pdev->dev, "hclk");
-+ if (IS_ERR(dmac->hclk)) {
-+ ret = PTR_ERR(dmac->hclk);
-+ goto out_free_dmac;
++ if (chan->nr_blocks > 1) {
++ for (i = 0; i < chan->nr_blocks; i++)
++ dma_pool_free(dmac->lli_pool, chan->block[i].lli_vaddr,
++ chan->block[i].lli_dma_addr);
++ kfree(chan->block);
+ }
-+ clk_enable(dmac->hclk);
-+
-+ ret = -ENOMEM;
-+ dmac->lli_pool = dma_pool_create("dmac", &pdev->dev,
-+ sizeof(struct dw_dma_lli), 4, 0);
-+ if (!dmac->lli_pool)
-+ goto out_disable_clk;
+
-+ spin_lock_init(&dmac->lock);
-+ dmac->dma.dev = &pdev->dev;
-+ dmac->dma.alloc_channel = dmac_alloc_channel;
-+ dmac->dma.release_channel = dmac_release_channel;
-+ dmac->dma.prepare_request_sg = dmac_prepare_request_sg;
-+ dmac->dma.prepare_request_cyclic = dmac_prepare_request_cyclic;
-+ dmac->dma.start_request = dmac_start_request;
-+ dmac->dma.stop_request = dmac_stop_request;
-+ dmac->dma.get_current_pos = dmac_get_current_pos;
++ chan->state = CH_STATE_ALLOCATED;
++}
+
-+ dmac->regs = ioremap(regs->start, regs->end - regs->start + 1);
-+ if (!dmac->regs)
-+ goto out_free_pool;
++static int dmac_prepare_request_sg(struct dma_controller *_dmac,
++ struct dma_request_sg *req)
++{
++ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
++ struct dw_dma_channel *chan;
++ unsigned long ctlhi, ctllo, cfghi, cfglo;
++ unsigned long block_size;
++ unsigned int nr_blocks;
++ int ret, i, direction;
++ unsigned long flags;
+
-+ ret = request_irq(platform_get_irq(pdev, 0), dmac_interrupt,
-+ IRQF_SAMPLE_RANDOM, pdev->name, dmac);
-+ if (ret)
-+ goto out_unmap_regs;
++ spin_lock_irqsave(&dmac->lock, flags);
+
-+ /* Enable the DMA controller */
-+ dmac_writel_lo(dmac, CFG, 1);
++ ret = -EINVAL;
++ if (req->req.channel >= DMAC_NR_CHANNELS
++ || dmac->channel[req->req.channel].state != CH_STATE_ALLOCATED
++ || req->block_size > DMAC_MAX_BLOCKSIZE) {
++ spin_unlock_irqrestore(&dmac->lock, flags);
++ return -EINVAL;
++ }
+
-+ register_dma_controller(&dmac->dma);
++ chan = &dmac->channel[req->req.channel];
++ chan->state = CH_STATE_BUSY;
++ chan->req_sg = req;
++ chan->is_cyclic = 0;
+
-+ printk(KERN_INFO
-+ "dmac%d: DesignWare DMA controller at 0x%p irq %d\n",
-+ dmac->dma.id, dmac->regs, platform_get_irq(pdev, 0));
++ /*
++ * We have marked the channel as busy, so no need to keep the
++ * lock as long as we only touch the channel-specific
++ * registers
++ */
++ spin_unlock_irqrestore(&dmac->lock, flags);
+
-+ return 0;
++ /*
++ * There may be limitations in the driver and/or the DMA
++ * controller that prevents us from sending a whole
++ * scatterlist item in one go. Taking this into account,
++ * calculate the number of block transfers we need to set up.
++ *
++ * FIXME: Let the peripheral driver know about the maximum
++ * block size we support. We really don't want to use a
++ * different block size than what was suggested by the
++ * peripheral.
++ *
++ * Each block will get its own Linked List Item (LLI) below.
++ */
++ block_size = req->block_size;
++ nr_blocks = req->nr_blocks;
++ pr_debug("block_size %lu, nr_blocks %u nr_sg = %u\n",
++ block_size, nr_blocks, req->nr_sg);
+
-+out_unmap_regs:
-+ iounmap(dmac->regs);
-+out_free_pool:
-+ dma_pool_destroy(dmac->lli_pool);
-+out_disable_clk:
-+ clk_disable(dmac->hclk);
-+ clk_put(dmac->hclk);
-+out_free_dmac:
-+ kfree(dmac);
-+ return ret;
-+}
++ BUG_ON(nr_blocks == 0);
++ chan->nr_blocks = nr_blocks;
+
-+static struct platform_driver dmac_driver = {
-+ .probe = dmac_probe,
-+ .driver = {
-+ .name = "dmaca",
-+ },
-+};
++ ret = -EINVAL;
++ cfglo = cfghi = 0;
++ switch (req->direction) {
++ case DMA_DIR_MEM_TO_PERIPH:
++ direction = DMA_TO_DEVICE;
++ cfghi = req->periph_id << (43 - 32);
++ break;
+
-+static int __init dmac_init(void)
-+{
-+ return platform_driver_register(&dmac_driver);
-+}
-+subsys_initcall(dmac_init);
++ case DMA_DIR_PERIPH_TO_MEM:
++ direction = DMA_FROM_DEVICE;
++ cfghi = req->periph_id << (39 - 32);
++ break;
++ default:
++ goto out_unclaim_channel;
++ }
+
-+static void __exit dmac_exit(void)
-+{
-+ platform_driver_unregister(&dmac_driver);
-+}
-+module_exit(dmac_exit);
++ chan->direction = direction;
+
-+MODULE_DESCRIPTION("Synopsys DesignWare DMA Controller driver");
-+MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
-+MODULE_LICENSE("GPL");
-diff --git a/arch/avr32/drivers/dw-dmac.h b/arch/avr32/drivers/dw-dmac.h
-new file mode 100644
-index 0000000..1f67921
---- /dev/null
-+++ b/arch/avr32/drivers/dw-dmac.h
-@@ -0,0 +1,42 @@
-+/*
-+ * Driver for the Synopsys DesignWare DMA Controller
-+ *
-+ * Copyright (C) 2005-2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#ifndef __AVR32_DW_DMAC_H__
-+#define __AVR32_DW_DMAC_H__
++ dmac_chan_writel_hi(dmac, req->req.channel, CFG, cfghi);
++ dmac_chan_writel_lo(dmac, req->req.channel, CFG, cfglo);
+
-+#define DW_DMAC_CFG 0x398
-+#define DW_DMAC_CH_EN 0x3a0
++ ctlhi = block_size >> req->width;
++ ctllo = ((req->direction << 20)
++ // | (1 << 14) | (1 << 11) // source/dest burst trans len
++ | (req->width << 4) | (req->width << 1)
++ | (1 << 0)); // interrupt enable
+
-+#define DW_DMAC_STATUS_XFER 0x2e8
-+#define DW_DMAC_STATUS_BLOCK 0x2f0
-+#define DW_DMAC_STATUS_ERROR 0x308
-+
-+#define DW_DMAC_MASK_XFER 0x310
-+#define DW_DMAC_MASK_BLOCK 0x318
-+#define DW_DMAC_MASK_ERROR 0x330
++ if (nr_blocks == 1) {
++ /* Only one block: No need to use block chaining */
++ if (direction == DMA_TO_DEVICE) {
++ dmac_chan_writel_lo(dmac, req->req.channel, SAR,
++ req->sg->dma_address);
++ dmac_chan_writel_lo(dmac, req->req.channel, DAR,
++ req->data_reg);
++ ctllo |= 2 << 7; // no dst increment
++ } else {
++ dmac_chan_writel_lo(dmac, req->req.channel, SAR,
++ req->data_reg);
++ dmac_chan_writel_lo(dmac, req->req.channel, DAR,
++ req->sg->dma_address);
++ ctllo |= 2 << 9; // no src increment
++ }
++ dmac_chan_writel_lo(dmac, req->req.channel, CTL, ctllo);
++ dmac_chan_writel_hi(dmac, req->req.channel, CTL, ctlhi);
++ pr_debug("ctl hi:lo 0x%lx:%lx\n", ctlhi, ctllo);
++ } else {
++ struct dw_dma_lli *lli, *lli_prev = NULL;
++ int j = 0, offset = 0;
+
-+#define DW_DMAC_CLEAR_XFER 0x338
-+#define DW_DMAC_CLEAR_BLOCK 0x340
-+#define DW_DMAC_CLEAR_ERROR 0x358
++ ret = -ENOMEM;
++ chan->block = allocate_blocks(dmac, nr_blocks);
++ if (!chan->block)
++ goto out_unclaim_channel;
+
-+#define DW_DMAC_STATUS_INT 0x360
++ if (direction == DMA_TO_DEVICE)
++ ctllo |= 1 << 28 | 1 << 27 | 2 << 7;
++ else
++ ctllo |= 1 << 28 | 1 << 27 | 2 << 9;
+
-+#define DW_DMAC_CHAN_SAR 0x000
-+#define DW_DMAC_CHAN_DAR 0x008
-+#define DW_DMAC_CHAN_LLP 0x010
-+#define DW_DMAC_CHAN_CTL 0x018
-+#define DW_DMAC_CHAN_SSTAT 0x020
-+#define DW_DMAC_CHAN_DSTAT 0x028
-+#define DW_DMAC_CHAN_SSTATAR 0x030
-+#define DW_DMAC_CHAN_DSTATAR 0x038
-+#define DW_DMAC_CHAN_CFG 0x040
-+#define DW_DMAC_CHAN_SGR 0x048
-+#define DW_DMAC_CHAN_DSR 0x050
++ /*
++ * Map scatterlist items to blocks. One scatterlist
++ * item may need more than one block for the reasons
++ * mentioned above.
++ */
++ for (i = 0; i < nr_blocks; i++) {
++ lli = chan->block[i].lli_vaddr;
++ if (lli_prev) {
++ lli_prev->llp = chan->block[i].lli_dma_addr;
++ pr_debug("lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
++ i - 1, chan->block[i - 1].lli_vaddr,
++ chan->block[i - 1].lli_dma_addr,
++ lli_prev->sar, lli_prev->dar, lli_prev->llp,
++ lli_prev->ctllo, lli_prev->ctlhi);
++ }
++ lli->llp = 0;
++ lli->ctllo = ctllo;
++ lli->ctlhi = ctlhi;
++ if (direction == DMA_TO_DEVICE) {
++ lli->sar = req->sg[j].dma_address + offset;
++ lli->dar = req->data_reg;
++ } else {
++ lli->sar = req->data_reg;
++ lli->dar = req->sg[j].dma_address + offset;
++ }
++ lli_prev = lli;
+
-+#endif /* __AVR32_DW_DMAC_H__ */
-diff --git a/arch/avr32/kernel/Makefile b/arch/avr32/kernel/Makefile
-index 90e5aff..1aedaeb 100644
---- a/arch/avr32/kernel/Makefile
-+++ b/arch/avr32/kernel/Makefile
-@@ -9,10 +9,6 @@ obj-y += syscall_table.o syscall-stubs.o irq.o
- obj-y += setup.o traps.o semaphore.o ptrace.o
- obj-y += signal.o sys_avr32.o process.o time.o
- obj-y += init_task.o switch_to.o cpu.o
-+obj-y += dma-controller.o
- obj-$(CONFIG_MODULES) += module.o avr32_ksyms.o
- obj-$(CONFIG_KPROBES) += kprobes.o
--
--USE_STANDARD_AS_RULE := true
--
--%.lds: %.lds.c FORCE
-- $(call if_changed_dep,cpp_lds_S)
-diff --git a/arch/avr32/kernel/dma-controller.c b/arch/avr32/kernel/dma-controller.c
-new file mode 100644
-index 0000000..fb654b3
---- /dev/null
-+++ b/arch/avr32/kernel/dma-controller.c
-@@ -0,0 +1,34 @@
-+/*
-+ * Preliminary DMA controller framework for AVR32
-+ *
-+ * Copyright (C) 2005-2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#include <asm/dma-controller.h>
++ offset += block_size;
++ if (offset > req->sg[j].length) {
++ j++;
++ offset = 0;
++ }
++ }
+
-+static LIST_HEAD(controllers);
++ pr_debug("lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
++ i - 1, chan->block[i - 1].lli_vaddr,
++ chan->block[i - 1].lli_dma_addr, lli_prev->sar,
++ lli_prev->dar, lli_prev->llp,
++ lli_prev->ctllo, lli_prev->ctlhi);
+
-+int register_dma_controller(struct dma_controller *dmac)
-+{
-+ static int next_id;
++ /*
++ * SAR, DAR and CTL are initialized from the LLI. We
++ * only have to enable the LLI bits in CTL.
++ */
++ dmac_chan_writel_hi(dmac, req->req.channel, CTL, 0);
++ dmac_chan_writel_lo(dmac, req->req.channel, LLP,
++ chan->block[0].lli_dma_addr);
++ dmac_chan_writel_lo(dmac, req->req.channel, CTL, 1 << 28 | 1 << 27);
++ }
+
-+ dmac->id = next_id++;
-+ list_add_tail(&dmac->list, &controllers);
++ set_channel_bit(dmac, MASK_XFER, req->req.channel);
++ set_channel_bit(dmac, MASK_ERROR, req->req.channel);
++ if (req->req.block_complete)
++ set_channel_bit(dmac, MASK_BLOCK, req->req.channel);
++ else
++ clear_channel_bit(dmac, MASK_BLOCK, req->req.channel);
+
+ return 0;
++
++out_unclaim_channel:
++ chan->state = CH_STATE_ALLOCATED;
++ return ret;
+}
-+EXPORT_SYMBOL(register_dma_controller);
+
-+struct dma_controller *find_dma_controller(int id)
++static int dmac_prepare_request_cyclic(struct dma_controller *_dmac,
++ struct dma_request_cyclic *req)
+{
-+ struct dma_controller *dmac;
++ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
++ struct dw_dma_channel *chan;
++ unsigned long ctlhi, ctllo, cfghi, cfglo;
++ unsigned long block_size;
++ int ret, i, direction;
++ unsigned long flags;
+
-+ list_for_each_entry(dmac, &controllers, list)
-+ if (dmac->id == id)
-+ return dmac;
-+ return NULL;
-+}
-+EXPORT_SYMBOL(find_dma_controller);
-diff --git a/arch/avr32/kernel/entry-avr32b.S b/arch/avr32/kernel/entry-avr32b.S
-index 42657f1..ccadfd9 100644
---- a/arch/avr32/kernel/entry-avr32b.S
-+++ b/arch/avr32/kernel/entry-avr32b.S
-@@ -159,11 +159,18 @@ handle_vmalloc_miss:
-
- .section .scall.text,"ax",@progbits
- system_call:
-+#ifdef CONFIG_PREEMPT
-+ mask_interrupts
-+#endif
- pushm r12 /* r12_orig */
- stmts --sp, r0-lr
-- zero_fp
++ spin_lock_irqsave(&dmac->lock, flags);
+
- mfsr r0, SYSREG_RAR_SUP
- mfsr r1, SYSREG_RSR_SUP
-+#ifdef CONFIG_PREEMPT
-+ unmask_interrupts
-+#endif
-+ zero_fp
- stm --sp, r0-r1
-
- /* check for syscall tracing */
-@@ -638,6 +645,13 @@ irq_level\level:
- stmts --sp,r0-lr
- mfsr r8, rar_int\level
- mfsr r9, rsr_int\level
-+
-+#ifdef CONFIG_PREEMPT
-+ sub r11, pc, (. - system_call)
-+ cp.w r11, r8
-+ breq 4f
-+#endif
++ block_size = (req->buffer_size/req->periods) >> req->width;
+
- pushm r8-r9
-
- mov r11, sp
-@@ -668,6 +682,16 @@ irq_level\level:
- sub sp, -4 /* ignore r12_orig */
- rete
-
-+#ifdef CONFIG_PREEMPT
-+4: mask_interrupts
-+ mfsr r8, rsr_int\level
-+ sbr r8, 16
-+ mtsr rsr_int\level, r8
-+ ldmts sp++, r0-lr
-+ sub sp, -4 /* ignore r12_orig */
-+ rete
-+#endif
++ ret = -EINVAL;
++ if (req->req.channel >= DMAC_NR_CHANNELS
++ || dmac->channel[req->req.channel].state != CH_STATE_ALLOCATED
++ || (req->periods == 0)
++ || block_size > DMAC_MAX_BLOCKSIZE) {
++ spin_unlock_irqrestore(&dmac->lock, flags);
++ return -EINVAL;
++ }
+
- 2: get_thread_info r0
- ld.w r1, r0[TI_flags]
- bld r1, TIF_CPU_GOING_TO_SLEEP
-diff --git a/arch/avr32/kernel/setup.c b/arch/avr32/kernel/setup.c
-index d08b0bc..4b4c188 100644
---- a/arch/avr32/kernel/setup.c
-+++ b/arch/avr32/kernel/setup.c
-@@ -248,7 +248,7 @@ static int __init early_parse_fbmem(char *p)
-
- fbmem_size = memparse(p, &p);
- if (*p == '@') {
-- fbmem_start = memparse(p, &p);
-+ fbmem_start = memparse(p + 1, &p);
- ret = add_reserved_region(fbmem_start,
- fbmem_start + fbmem_size - 1,
- "Framebuffer");
-diff --git a/arch/avr32/kernel/vmlinux.lds.S b/arch/avr32/kernel/vmlinux.lds.S
-new file mode 100644
-index 0000000..ce9ac96
---- /dev/null
-+++ b/arch/avr32/kernel/vmlinux.lds.S
-@@ -0,0 +1,143 @@
-+/*
-+ * AVR32 linker script for the Linux kernel
-+ *
-+ * Copyright (C) 2004-2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#define LOAD_OFFSET 0x00000000
-+#include <asm-generic/vmlinux.lds.h>
-+#include <asm/cache.h>
-+#include <asm/thread_info.h>
++ chan = &dmac->channel[req->req.channel];
++ chan->state = CH_STATE_BUSY;
++ chan->is_cyclic = 1;
++ chan->req_cyclic = req;
+
-+OUTPUT_FORMAT("elf32-avr32", "elf32-avr32", "elf32-avr32")
-+OUTPUT_ARCH(avr32)
-+ENTRY(_start)
-+
-+/* Big endian */
-+jiffies = jiffies_64 + 4;
-+
-+SECTIONS
-+{
-+ . = CONFIG_ENTRY_ADDRESS;
-+ .init : AT(ADDR(.init) - LOAD_OFFSET) {
-+ _stext = .;
-+ __init_begin = .;
-+ _sinittext = .;
-+ *(.text.reset)
-+ *(.init.text)
-+ /*
-+ * .exit.text is discarded at runtime, not
-+ * link time, to deal with references from
-+ * __bug_table
-+ */
-+ *(.exit.text)
-+ _einittext = .;
-+ . = ALIGN(4);
-+ __tagtable_begin = .;
-+ *(.taglist.init)
-+ __tagtable_end = .;
-+ *(.init.data)
-+ . = ALIGN(16);
-+ __setup_start = .;
-+ *(.init.setup)
-+ __setup_end = .;
-+ . = ALIGN(4);
-+ __initcall_start = .;
-+ INITCALLS
-+ __initcall_end = .;
-+ __con_initcall_start = .;
-+ *(.con_initcall.init)
-+ __con_initcall_end = .;
-+ __security_initcall_start = .;
-+ *(.security_initcall.init)
-+ __security_initcall_end = .;
-+#ifdef CONFIG_BLK_DEV_INITRD
-+ . = ALIGN(32);
-+ __initramfs_start = .;
-+ *(.init.ramfs)
-+ __initramfs_end = .;
-+#endif
-+ . = ALIGN(PAGE_SIZE);
-+ __init_end = .;
-+ }
-+
-+ .text : AT(ADDR(.text) - LOAD_OFFSET) {
-+ _evba = .;
-+ _text = .;
-+ *(.ex.text)
-+ . = 0x50;
-+ *(.tlbx.ex.text)
-+ . = 0x60;
-+ *(.tlbr.ex.text)
-+ . = 0x70;
-+ *(.tlbw.ex.text)
-+ . = 0x100;
-+ *(.scall.text)
-+ *(.irq.text)
-+ TEXT_TEXT
-+ SCHED_TEXT
-+ LOCK_TEXT
-+ KPROBES_TEXT
-+ *(.fixup)
-+ *(.gnu.warning)
-+ _etext = .;
-+ } = 0xd703d703
-+
-+ . = ALIGN(4);
-+ __ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) {
-+ __start___ex_table = .;
-+ *(__ex_table)
-+ __stop___ex_table = .;
-+ }
-+
-+ BUG_TABLE
-+
-+ RODATA
-+
-+ . = ALIGN(THREAD_SIZE);
-+
-+ .data : AT(ADDR(.data) - LOAD_OFFSET) {
-+ _data = .;
-+ _sdata = .;
-+ /*
-+ * First, the init task union, aligned to an 8K boundary.
-+ */
-+ *(.data.init_task)
++ /*
++ * We have marked the channel as busy, so no need to keep the
++ * lock as long as we only touch the channel-specific
++ * registers
++ */
++ spin_unlock_irqrestore(&dmac->lock, flags);
++
++ /*
++ Setup
++ */
++ BUG_ON(req->buffer_size % req->periods);
++ /* printk(KERN_INFO "block_size = %lu, periods = %u\n", block_size, req->periods); */
+
-+ /* Then, the cacheline aligned data */
-+ . = ALIGN(L1_CACHE_BYTES);
-+ *(.data.cacheline_aligned)
++ chan->nr_blocks = req->periods;
+
-+ /* And the rest... */
-+ *(.data.rel*)
-+ DATA_DATA
-+ CONSTRUCTORS
++ ret = -EINVAL;
++ cfglo = cfghi = 0;
++ switch (req->direction) {
++ case DMA_DIR_MEM_TO_PERIPH:
++ direction = DMA_TO_DEVICE;
++ cfghi = req->periph_id << (43 - 32);
++ break;
+
-+ _edata = .;
++ case DMA_DIR_PERIPH_TO_MEM:
++ direction = DMA_FROM_DEVICE;
++ cfghi = req->periph_id << (39 - 32);
++ break;
++ default:
++ goto out_unclaim_channel;
+ }
+
++ chan->direction = direction;
+
-+ . = ALIGN(8);
-+ .bss : AT(ADDR(.bss) - LOAD_OFFSET) {
-+ __bss_start = .;
-+ *(.bss)
-+ *(COMMON)
-+ . = ALIGN(8);
-+ __bss_stop = .;
-+ _end = .;
-+ }
++ dmac_chan_writel_hi(dmac, req->req.channel, CFG, cfghi);
++ dmac_chan_writel_lo(dmac, req->req.channel, CFG, cfglo);
+
-+ /* When something in the kernel is NOT compiled as a module, the module
-+ * cleanup code and data are put into these segments. Both can then be
-+ * thrown away, as cleanup code is never called unless it's a module.
-+ */
-+ /DISCARD/ : {
-+ *(.exit.data)
-+ *(.exitcall.exit)
-+ }
++ ctlhi = block_size;
++ ctllo = ((req->direction << 20)
++ | (req->width << 4) | (req->width << 1)
++ | (1 << 0)); // interrupt enable
+
-+ DWARF_DEBUG
-+}
-diff --git a/arch/avr32/kernel/vmlinux.lds.c b/arch/avr32/kernel/vmlinux.lds.c
-deleted file mode 100644
-index db0438f..0000000
---- a/arch/avr32/kernel/vmlinux.lds.c
-+++ /dev/null
-@@ -1,142 +0,0 @@
--/*
-- * AVR32 linker script for the Linux kernel
-- *
-- * Copyright (C) 2004-2006 Atmel Corporation
-- *
-- * This program is free software; you can redistribute it and/or modify
-- * it under the terms of the GNU General Public License version 2 as
-- * published by the Free Software Foundation.
-- */
--#define LOAD_OFFSET 0x00000000
--#include <asm-generic/vmlinux.lds.h>
--
--OUTPUT_FORMAT("elf32-avr32", "elf32-avr32", "elf32-avr32")
--OUTPUT_ARCH(avr32)
--ENTRY(_start)
--
--/* Big endian */
--jiffies = jiffies_64 + 4;
--
--SECTIONS
--{
-- . = CONFIG_ENTRY_ADDRESS;
-- .init : AT(ADDR(.init) - LOAD_OFFSET) {
-- _stext = .;
-- __init_begin = .;
-- _sinittext = .;
-- *(.text.reset)
-- *(.init.text)
-- /*
-- * .exit.text is discarded at runtime, not
-- * link time, to deal with references from
-- * __bug_table
-- */
-- *(.exit.text)
-- _einittext = .;
-- . = ALIGN(4);
-- __tagtable_begin = .;
-- *(.taglist.init)
-- __tagtable_end = .;
-- *(.init.data)
-- . = ALIGN(16);
-- __setup_start = .;
-- *(.init.setup)
-- __setup_end = .;
-- . = ALIGN(4);
-- __initcall_start = .;
-- INITCALLS
-- __initcall_end = .;
-- __con_initcall_start = .;
-- *(.con_initcall.init)
-- __con_initcall_end = .;
-- __security_initcall_start = .;
-- *(.security_initcall.init)
-- __security_initcall_end = .;
--#ifdef CONFIG_BLK_DEV_INITRD
-- . = ALIGN(32);
-- __initramfs_start = .;
-- *(.init.ramfs)
-- __initramfs_end = .;
--#endif
-- . = ALIGN(4096);
-- __init_end = .;
-- }
--
-- . = ALIGN(8192);
-- .text : AT(ADDR(.text) - LOAD_OFFSET) {
-- _evba = .;
-- _text = .;
-- *(.ex.text)
-- . = 0x50;
-- *(.tlbx.ex.text)
-- . = 0x60;
-- *(.tlbr.ex.text)
-- . = 0x70;
-- *(.tlbw.ex.text)
-- . = 0x100;
-- *(.scall.text)
-- *(.irq.text)
-- TEXT_TEXT
-- SCHED_TEXT
-- LOCK_TEXT
-- KPROBES_TEXT
-- *(.fixup)
-- *(.gnu.warning)
-- _etext = .;
-- } = 0xd703d703
--
-- . = ALIGN(4);
-- __ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) {
-- __start___ex_table = .;
-- *(__ex_table)
-- __stop___ex_table = .;
-- }
--
-- BUG_TABLE
--
-- RODATA
--
-- . = ALIGN(8192);
--
-- .data : AT(ADDR(.data) - LOAD_OFFSET) {
-- _data = .;
-- _sdata = .;
-- /*
-- * First, the init task union, aligned to an 8K boundary.
-- */
-- *(.data.init_task)
--
-- /* Then, the cacheline aligned data */
-- . = ALIGN(32);
-- *(.data.cacheline_aligned)
--
-- /* And the rest... */
-- *(.data.rel*)
-- DATA_DATA
-- CONSTRUCTORS
--
-- _edata = .;
-- }
--
--
-- . = ALIGN(8);
-- .bss : AT(ADDR(.bss) - LOAD_OFFSET) {
-- __bss_start = .;
-- *(.bss)
-- *(COMMON)
-- . = ALIGN(8);
-- __bss_stop = .;
-- _end = .;
-- }
--
-- /* When something in the kernel is NOT compiled as a module, the module
-- * cleanup code and data are put into these segments. Both can then be
-- * thrown away, as cleanup code is never called unless it's a module.
-- */
-- /DISCARD/ : {
-- *(.exit.data)
-- *(.exitcall.exit)
-- }
--
-- DWARF_DEBUG
--}
-diff --git a/arch/avr32/mach-at32ap/Kconfig b/arch/avr32/mach-at32ap/Kconfig
-index eb30783..43c5b9f 100644
---- a/arch/avr32/mach-at32ap/Kconfig
-+++ b/arch/avr32/mach-at32ap/Kconfig
-@@ -26,6 +26,13 @@ config AP7000_8_BIT_SMC
-
- endchoice
-
-+config GPIO_DEV
-+ bool "GPIO /dev interface"
-+ select CONFIGFS_FS
-+ default n
-+ help
-+ Say `Y' to enable a /dev interface to the GPIO pins.
-+
- endmenu
-
- endif # PLATFORM_AT32AP
-diff --git a/arch/avr32/mach-at32ap/Makefile b/arch/avr32/mach-at32ap/Makefile
-index a8b4450..250372a 100644
---- a/arch/avr32/mach-at32ap/Makefile
-+++ b/arch/avr32/mach-at32ap/Makefile
-@@ -2,3 +2,4 @@ obj-y += at32ap.o clock.o intc.o extint.o pio.o hsmc.o
- obj-$(CONFIG_CPU_AT32AP7000) += at32ap7000.o
- obj-$(CONFIG_CPU_AT32AP7000) += time-tc.o
- obj-$(CONFIG_CPU_FREQ_AT32AP) += cpufreq.o
-+obj-$(CONFIG_GPIO_DEV) += gpio-dev.o
-diff --git a/arch/avr32/mach-at32ap/at32ap7000.c b/arch/avr32/mach-at32ap/at32ap7000.c
-index 64cc558..8375f89 100644
---- a/arch/avr32/mach-at32ap/at32ap7000.c
-+++ b/arch/avr32/mach-at32ap/at32ap7000.c
-@@ -25,12 +25,6 @@
- #include "pio.h"
- #include "pm.h"
-
--/*
-- * We can reduce the code size a bit by using a constant here. Since
-- * this file is completely chip-specific, it's safe to not use
-- * ioremap. Generic drivers should of course never do this.
-- */
--#define AT32_PM_BASE 0xfff00000
-
- #define PBMEM(base) \
- { \
-@@ -562,6 +556,17 @@ static struct clk pico_clk = {
- .users = 1,
- };
-
-+static struct resource dmaca0_resource[] = {
-+ {
-+ .start = 0xff200000,
-+ .end = 0xff20ffff,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ IRQ(2),
-+};
-+DEFINE_DEV(dmaca, 0);
-+DEV_CLK(hclk, dmaca0, hsb, 10);
++ {
++ struct dw_dma_lli *lli = NULL, *lli_prev = NULL;
+
- /* --------------------------------------------------------------------
- * HMATRIX
- * -------------------------------------------------------------------- */
-@@ -661,6 +666,7 @@ void __init at32_add_system_devices(void)
- platform_device_register(&at32_eic0_device);
- platform_device_register(&smc0_device);
- platform_device_register(&pdc_device);
-+ platform_device_register(&dmaca0_device);
-
- platform_device_register(&at32_systc0_device);
-
-@@ -966,6 +972,83 @@ at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n)
- }
-
- /* --------------------------------------------------------------------
-+ * TWI
-+ * -------------------------------------------------------------------- */
++ ret = -ENOMEM;
++ chan->block = allocate_blocks(dmac, req->periods);
++ if (!chan->block)
++ goto out_unclaim_channel;
+
-+static struct resource atmel_twi0_resource[] = {
-+ PBMEM(0xffe00800),
-+ IRQ(5),
-+};
-+DEFINE_DEV(atmel_twi, 0);
-+DEV_CLK(pclk,atmel_twi0,pba,2);
++ if (direction == DMA_TO_DEVICE)
++ ctllo |= 1 << 28 | 1 << 27 | 2 << 7;
++ else
++ ctllo |= 1 << 28 | 1 << 27 | 2 << 9;
+
-+struct platform_device *__init
-+at32_add_device_twi(unsigned int id)
-+{
-+ struct platform_device *pdev;
++ /*
++ * Set up a linked list items where each period gets
++ * an item. The linked list item for the last period
++ * points back to the star of the buffer making a
++ * cyclic buffer.
++ */
++ for (i = 0; i < req->periods; i++) {
++ lli = chan->block[i].lli_vaddr;
++ if (lli_prev) {
++ lli_prev->llp = chan->block[i].lli_dma_addr;
++ /* printk(KERN_INFO "lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
++ i - 1, chan->block[i - 1].lli_vaddr,
++ chan->block[i - 1].lli_dma_addr,
++ lli_prev->sar, lli_prev->dar, lli_prev->llp,
++ lli_prev->ctllo, lli_prev->ctlhi);*/
++ }
++ lli->llp = 0;
++ lli->ctllo = ctllo;
++ lli->ctlhi = ctlhi;
++ if (direction == DMA_TO_DEVICE) {
++ lli->sar = req->buffer_start + i*(block_size << req->width);
++ lli->dar = req->data_reg;
++ } else {
++ lli->sar = req->data_reg;
++ lli->dar = req->buffer_start + i*(block_size << req->width);
++ }
++ lli_prev = lli;
++ }
++ lli->llp = chan->block[0].lli_dma_addr;
+
-+ switch (id) {
-+ case 0:
-+ pdev = &atmel_twi0_device;
-+ select_peripheral(PA(6), PERIPH_A, 0); /* SDA */
-+ select_peripheral(PA(7), PERIPH_A, 0); /* SCL */
-+ break;
++ /*printk(KERN_INFO "lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
++ i - 1, chan->block[i - 1].lli_vaddr,
++ chan->block[i - 1].lli_dma_addr, lli_prev->sar,
++ lli_prev->dar, lli_prev->llp,
++ lli_prev->ctllo, lli_prev->ctlhi); */
+
-+ default:
-+ return NULL;
++ /*
++ * SAR, DAR and CTL are initialized from the LLI. We
++ * only have to enable the LLI bits in CTL.
++ */
++ dmac_chan_writel_lo(dmac, req->req.channel, LLP,
++ chan->block[0].lli_dma_addr);
++ dmac_chan_writel_lo(dmac, req->req.channel, CTL, 1 << 28 | 1 << 27);
+ }
+
-+ platform_device_register(pdev);
-+ return pdev;
-+}
++ clear_channel_bit(dmac, MASK_XFER, req->req.channel);
++ set_channel_bit(dmac, MASK_ERROR, req->req.channel);
++ if (req->req.block_complete)
++ set_channel_bit(dmac, MASK_BLOCK, req->req.channel);
++ else
++ clear_channel_bit(dmac, MASK_BLOCK, req->req.channel);
+
-+/* --------------------------------------------------------------------
-+ * MMC
-+ * -------------------------------------------------------------------- */
-+static struct mci_platform_data atmel_mci0_data = {
-+ .detect_pin = GPIO_PIN_NONE,
-+ .wp_pin = GPIO_PIN_NONE,
-+};
-+static struct resource atmel_mci0_resource[] = {
-+ PBMEM(0xfff02400),
-+ IRQ(28),
-+};
-+DEFINE_DEV_DATA(atmel_mci, 0);
-+DEV_CLK(mci_clk, atmel_mci0, pbb, 9);
++ return 0;
+
-+struct platform_device *__init
-+at32_add_device_mci(unsigned int id, struct mci_platform_data *data)
++out_unclaim_channel:
++ chan->state = CH_STATE_ALLOCATED;
++ return ret;
++}
++
++static int dmac_start_request(struct dma_controller *_dmac,
++ unsigned int channel)
+{
-+ struct platform_device *pdev;
++ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
+
-+ switch (id) {
-+ case 0:
-+ pdev = &atmel_mci0_device;
-+ select_peripheral(PA(10), PERIPH_A, 0); /* CLK */
-+ select_peripheral(PA(11), PERIPH_A, 0); /* CMD */
-+ select_peripheral(PA(12), PERIPH_A, 0); /* DATA0 */
-+ select_peripheral(PA(13), PERIPH_A, 0); /* DATA1 */
-+ select_peripheral(PA(14), PERIPH_A, 0); /* DATA2 */
-+ select_peripheral(PA(15), PERIPH_A, 0); /* DATA3 */
-+ break;
-+ default:
-+ return NULL;
-+ }
++ BUG_ON(channel >= DMAC_NR_CHANNELS);
+
-+ if (data) {
-+ if (data->detect_pin != GPIO_PIN_NONE)
-+ at32_select_gpio(data->detect_pin, 0);
-+ if (data->wp_pin != GPIO_PIN_NONE)
-+ at32_select_gpio(data->wp_pin, 0);
-+ memcpy(pdev->dev.platform_data, data,
-+ sizeof(struct mci_platform_data));
-+ }
++ set_channel_bit(dmac, CH_EN, channel);
+
-+ platform_device_register(pdev);
-+ return pdev;
++ return 0;
+}
+
-+/* --------------------------------------------------------------------
- * LCDC
- * -------------------------------------------------------------------- */
- static struct atmel_lcdfb_info atmel_lcdfb0_data;
-@@ -1168,6 +1251,143 @@ at32_add_device_ssc(unsigned int id, unsigned int flags)
- }
-
- /* --------------------------------------------------------------------
-+ * USB Device Controller
-+ * -------------------------------------------------------------------- */
-+static struct resource usba0_resource[] __initdata = {
-+ {
-+ .start = 0xff300000,
-+ .end = 0xff3fffff,
-+ .flags = IORESOURCE_MEM,
-+ }, {
-+ .start = 0xfff03000,
-+ .end = 0xfff033ff,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ IRQ(31),
-+};
-+static struct clk usba0_pclk = {
-+ .name = "pclk",
-+ .parent = &pbb_clk,
-+ .mode = pbb_clk_mode,
-+ .get_rate = pbb_clk_get_rate,
-+ .index = 12,
-+};
-+static struct clk usba0_hclk = {
-+ .name = "hclk",
-+ .parent = &hsb_clk,
-+ .mode = hsb_clk_mode,
-+ .get_rate = hsb_clk_get_rate,
-+ .index = 6,
-+};
-+
-+struct platform_device *__init
-+at32_add_device_usba(unsigned int id, struct usba_platform_data *data)
++static dma_addr_t dmac_get_current_pos(struct dma_controller *_dmac,
++ unsigned int channel)
+{
-+ struct platform_device *pdev;
-+
-+ if (id != 0)
-+ return NULL;
-+
-+ pdev = platform_device_alloc("atmel_usba_udc", 0);
-+ if (!pdev)
-+ return NULL;
++ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
++ struct dw_dma_channel *chan;
++ dma_addr_t current_pos;
+
-+ if (platform_device_add_resources(pdev, usba0_resource,
-+ ARRAY_SIZE(usba0_resource)))
-+ goto out_free_pdev;
++ BUG_ON(channel >= DMAC_NR_CHANNELS);
+
-+ if (data) {
-+ if (platform_device_add_data(pdev, data, sizeof(*data)))
-+ goto out_free_pdev;
++ chan = &dmac->channel[channel];
+
-+ if (data->vbus_pin != GPIO_PIN_NONE)
-+ at32_select_gpio(data->vbus_pin, 0);
++ switch (chan->direction) {
++ case DMA_TO_DEVICE:
++ current_pos = dmac_chan_readl_lo(dmac, channel, SAR);
++ break;
++ case DMA_FROM_DEVICE:
++ current_pos = dmac_chan_readl_lo(dmac, channel, DAR);
++ break;
++ default:
++ return 0;
+ }
+
-+ usba0_pclk.dev = &pdev->dev;
-+ usba0_hclk.dev = &pdev->dev;
-+
-+ platform_device_add(pdev);
+
-+ return pdev;
++ if (!current_pos) {
++ if (chan->is_cyclic) {
++ current_pos = chan->req_cyclic->buffer_start;
++ } else {
++ current_pos = chan->req_sg->sg->dma_address;
++ }
++ }
+
-+out_free_pdev:
-+ platform_device_put(pdev);
-+ return NULL;
++ return current_pos;
+}
+
-+/* --------------------------------------------------------------------
-+ * AC97C
-+ * -------------------------------------------------------------------- */
-+static struct resource atmel_ac97c0_resource[] = {
-+ PBMEM(0xfff02800),
-+ IRQ(29),
-+};
-+DEFINE_DEV(atmel_ac97c, 0);
-+DEV_CLK(pclk, atmel_ac97c0, pbb, 10);
+
-+struct platform_device *__init
-+at32_add_device_ac97c(unsigned int id)
++static int dmac_stop_request(struct dma_controller *_dmac,
++ unsigned int channel)
+{
-+ struct platform_device *pdev;
++ struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
++ struct dw_dma_channel *chan;
+
-+ switch (id) {
-+ case 0:
-+ pdev = &atmel_ac97c0_device;
-+ select_peripheral(PB(20), PERIPH_B, 0); /* SYNC */
-+ select_peripheral(PB(21), PERIPH_B, 0); /* SDO */
-+ select_peripheral(PB(22), PERIPH_B, 0); /* SDI */
-+ select_peripheral(PB(23), PERIPH_B, 0); /* SCLK */
-+ break;
-+ default:
-+ return NULL;
++ BUG_ON(channel >= DMAC_NR_CHANNELS);
++
++ chan = &dmac->channel[channel];
++ pr_debug("stop: st%u s%08x d%08x l%08x ctl0x%08x:0x%08x\n",
++ chan->state, dmac_chan_readl_lo(dmac, channel, SAR),
++ dmac_chan_readl_lo(dmac, channel, DAR),
++ dmac_chan_readl_lo(dmac, channel, LLP),
++ dmac_chan_readl_hi(dmac, channel, CTL),
++ dmac_chan_readl_lo(dmac, channel, CTL));
++
++ if (chan->state == CH_STATE_BUSY) {
++ clear_channel_bit(dmac, CH_EN, channel);
++ cleanup_channel(dmac, &dmac->channel[channel]);
+ }
+
-+ platform_device_register(pdev);
-+ return pdev;
++ return 0;
+}
+
-+/* --------------------------------------------------------------------
-+ * DAC
-+ * -------------------------------------------------------------------- */
-+static struct resource abdac0_resource[] = {
-+ PBMEM(0xfff02000),
-+ IRQ(27),
-+};
-+DEFINE_DEV(abdac, 0);
-+DEV_CLK(pclk, abdac0, pbb, 8);
-+static struct clk abdac0_sample_clk = {
-+ .name = "sample_clk",
-+ .dev = &abdac0_device.dev,
-+ .mode = genclk_mode,
-+ .get_rate = genclk_get_rate,
-+ .set_rate = genclk_set_rate,
-+ .set_parent = genclk_set_parent,
-+ .index = 6,
-+};
+
-+struct platform_device *__init
-+at32_add_device_abdac(unsigned int id)
++static void dmac_block_complete(struct dw_dma_controller *dmac)
+{
-+ struct platform_device *pdev;
++ struct dw_dma_channel *chan;
++ unsigned long status, chanid;
+
-+ switch (id) {
-+ case 0:
-+ pdev = &abdac0_device;
-+ select_peripheral(PB(20), PERIPH_A, 0); /* DATA1 */
-+ select_peripheral(PB(21), PERIPH_A, 0); /* DATA0 */
-+ select_peripheral(PB(22), PERIPH_A, 0); /* DATAN1 */
-+ select_peripheral(PB(23), PERIPH_A, 0); /* DATAN0 */
-+ break;
-+ default:
-+ return NULL;
++ status = dmac_readl_lo(dmac, STATUS_BLOCK);
++
++ while (status) {
++ struct dma_request *req;
++ chanid = __ffs(status);
++ chan = &dmac->channel[chanid];
++
++ if (chan->is_cyclic) {
++ BUG_ON(!chan->req_cyclic
++ || !chan->req_cyclic->req.block_complete);
++ req = &chan->req_cyclic->req;
++ } else {
++ BUG_ON(!chan->req_sg || !chan->req_sg->req.block_complete);
++ req = &chan->req_sg->req;
++ }
++ dmac_writel_lo(dmac, CLEAR_BLOCK, 1 << chanid);
++ req->block_complete(req);
++ status = dmac_readl_lo(dmac, STATUS_BLOCK);
+ }
++}
+
-+ platform_device_register(pdev);
-+ return pdev;
++static void dmac_xfer_complete(struct dw_dma_controller *dmac)
++{
++ struct dw_dma_channel *chan;
++ struct dma_request *req;
++ unsigned long status, chanid;
++
++ status = dmac_readl_lo(dmac, STATUS_XFER);
++
++ while (status) {
++ chanid = __ffs(status);
++ chan = &dmac->channel[chanid];
++
++ dmac_writel_lo(dmac, CLEAR_XFER, 1 << chanid);
++
++ req = &chan->req_sg->req;
++ BUG_ON(!req);
++ cleanup_channel(dmac, chan);
++ if (req->xfer_complete)
++ req->xfer_complete(req);
++
++ status = dmac_readl_lo(dmac, STATUS_XFER);
++ }
+}
+
-+/* --------------------------------------------------------------------
- * GCLK
- * -------------------------------------------------------------------- */
- static struct clk gclk0 = {
-@@ -1230,6 +1450,7 @@ struct clk *at32_clock_list[] = {
- &smc0_mck,
- &pdc_hclk,
- &pdc_pclk,
-+ &dmaca0_hclk,
- &pico_clk,
- &pio0_mck,
- &pio1_mck,
-@@ -1247,11 +1468,18 @@ struct clk *at32_clock_list[] = {
- &macb1_pclk,
- &atmel_spi0_spi_clk,
- &atmel_spi1_spi_clk,
-+ &atmel_twi0_pclk,
-+ &atmel_mci0_mci_clk,
- &atmel_lcdfb0_hck1,
- &atmel_lcdfb0_pixclk,
- &ssc0_pclk,
- &ssc1_pclk,
- &ssc2_pclk,
-+ &usba0_hclk,
-+ &usba0_pclk,
-+ &atmel_ac97c0_pclk,
-+ &abdac0_pclk,
-+ &abdac0_sample_clk,
- &gclk0,
- &gclk1,
- &gclk2,
-@@ -1293,6 +1521,7 @@ void __init at32_clock_init(void)
- genclk_init_parent(&gclk3);
- genclk_init_parent(&gclk4);
- genclk_init_parent(&atmel_lcdfb0_pixclk);
-+ genclk_init_parent(&abdac0_sample_clk);
-
- /*
- * Turn on all clocks that have at least one user already, and
-diff --git a/arch/avr32/mach-at32ap/clock.c b/arch/avr32/mach-at32ap/clock.c
-index 0f8c89c..4642117 100644
---- a/arch/avr32/mach-at32ap/clock.c
-+++ b/arch/avr32/mach-at32ap/clock.c
-@@ -150,3 +150,119 @@ struct clk *clk_get_parent(struct clk *clk)
- return clk->parent;
- }
- EXPORT_SYMBOL(clk_get_parent);
++static void dmac_error(struct dw_dma_controller *dmac)
++{
++ struct dw_dma_channel *chan;
++ unsigned long status, chanid;
+
++ status = dmac_readl_lo(dmac, STATUS_ERROR);
+
++ while (status) {
++ struct dma_request *req;
+
-+#ifdef CONFIG_DEBUG_FS
++ chanid = __ffs(status);
++ chan = &dmac->channel[chanid];
+
-+/* /sys/kernel/debug/at32ap_clk */
++ dmac_writel_lo(dmac, CLEAR_ERROR, 1 << chanid);
++ clear_channel_bit(dmac, CH_EN, chanid);
+
-+#include <linux/io.h>
-+#include <linux/debugfs.h>
-+#include <linux/seq_file.h>
-+#include "pm.h"
++ if (chan->is_cyclic) {
++ BUG_ON(!chan->req_cyclic);
++ req = &chan->req_cyclic->req;
++ } else {
++ BUG_ON(!chan->req_sg);
++ req = &chan->req_sg->req;
++ }
+
++ cleanup_channel(dmac, chan);
++ if (req->error)
++ req->error(req);
+
-+#define NEST_DELTA 2
-+#define NEST_MAX 6
++ status = dmac_readl_lo(dmac, STATUS_XFER);
++ }
++}
+
-+struct clkinf {
-+ struct seq_file *s;
-+ unsigned nest;
-+};
++static irqreturn_t dmac_interrupt(int irq, void *dev_id)
++{
++ struct dw_dma_controller *dmac = dev_id;
++ unsigned long status;
++ int ret = IRQ_NONE;
++
++ spin_lock(&dmac->lock);
++
++ status = dmac_readl_lo(dmac, STATUS_INT);
++
++ while (status) {
++ ret = IRQ_HANDLED;
++ if (status & 0x10)
++ dmac_error(dmac);
++ if (status & 0x02)
++ dmac_block_complete(dmac);
++ if (status & 0x01)
++ dmac_xfer_complete(dmac);
++
++ status = dmac_readl_lo(dmac, STATUS_INT);
++ }
++
++ spin_unlock(&dmac->lock);
++ return ret;
++}
+
-+static void
-+dump_clock(struct clk *parent, struct clkinf *r)
++static int __devinit dmac_probe(struct platform_device *pdev)
+{
-+ unsigned nest = r->nest;
-+ char buf[16 + NEST_MAX];
-+ struct clk *clk;
-+ unsigned i;
++ struct dw_dma_controller *dmac;
++ struct resource *regs;
++ int ret;
+
-+ /* skip clocks coupled to devices that aren't registered */
-+ if (parent->dev && !parent->dev->bus_id[0] && !parent->users)
-+ return;
++ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (!regs)
++ return -ENXIO;
+
-+ /* <nest spaces> name <pad to end> */
-+ memset(buf, ' ', sizeof(buf) - 1);
-+ buf[sizeof(buf) - 1] = 0;
-+ i = strlen(parent->name);
-+ memcpy(buf + nest, parent->name,
-+ min(i, (unsigned)(sizeof(buf) - 1 - nest)));
-+
-+ seq_printf(r->s, "%s%c users=%2d %-3s %9ld Hz",
-+ buf, parent->set_parent ? '*' : ' ',
-+ parent->users,
-+ parent->users ? "on" : "off", /* NOTE: not-paranoid!! */
-+ clk_get_rate(parent));
-+ if (parent->dev)
-+ seq_printf(r->s, ", for %s", parent->dev->bus_id);
-+ seq_printf(r->s, "\n");
-+
-+ /* cost of this scan is small, but not linear... */
-+ r->nest = nest + NEST_DELTA;
-+ for (i = 3; i < at32_nr_clocks; i++) {
-+ clk = at32_clock_list[i];
-+ if (clk->parent == parent)
-+ dump_clock(clk, r);
-+ }
-+ r->nest = nest;
-+}
-+
-+static int clk_show(struct seq_file *s, void *unused)
-+{
-+ struct clkinf r;
-+ int i;
-+
-+ /* show all the power manager registers */
-+ seq_printf(s, "MCCTRL = %8x\n", pm_readl(MCCTRL));
-+ seq_printf(s, "CKSEL = %8x\n", pm_readl(CKSEL));
-+ seq_printf(s, "CPUMASK = %8x\n", pm_readl(CPU_MASK));
-+ seq_printf(s, "HSBMASK = %8x\n", pm_readl(HSB_MASK));
-+ seq_printf(s, "PBAMASK = %8x\n", pm_readl(PBA_MASK));
-+ seq_printf(s, "PBBMASK = %8x\n", pm_readl(PBB_MASK));
-+ seq_printf(s, "PLL0 = %8x\n", pm_readl(PLL0));
-+ seq_printf(s, "PLL1 = %8x\n", pm_readl(PLL1));
-+ seq_printf(s, "IMR = %8x\n", pm_readl(IMR));
-+ for (i = 0; i < 8; i++) {
-+ if (i == 5)
-+ continue;
-+ seq_printf(s, "GCCTRL%d = %8x\n", i, pm_readl(GCCTRL(i)));
++ dmac = kmalloc(sizeof(*dmac), GFP_KERNEL);
++ if (!dmac)
++ return -ENOMEM;
++ memset(dmac, 0, sizeof(*dmac));
++
++ dmac->hclk = clk_get(&pdev->dev, "hclk");
++ if (IS_ERR(dmac->hclk)) {
++ ret = PTR_ERR(dmac->hclk);
++ goto out_free_dmac;
+ }
++ clk_enable(dmac->hclk);
++
++ ret = -ENOMEM;
++ dmac->lli_pool = dma_pool_create("dmac", &pdev->dev,
++ sizeof(struct dw_dma_lli), 4, 0);
++ if (!dmac->lli_pool)
++ goto out_disable_clk;
++
++ spin_lock_init(&dmac->lock);
++ dmac->dma.dev = &pdev->dev;
++ dmac->dma.alloc_channel = dmac_alloc_channel;
++ dmac->dma.release_channel = dmac_release_channel;
++ dmac->dma.prepare_request_sg = dmac_prepare_request_sg;
++ dmac->dma.prepare_request_cyclic = dmac_prepare_request_cyclic;
++ dmac->dma.start_request = dmac_start_request;
++ dmac->dma.stop_request = dmac_stop_request;
++ dmac->dma.get_current_pos = dmac_get_current_pos;
+
-+ seq_printf(s, "\n");
++ dmac->regs = ioremap(regs->start, regs->end - regs->start + 1);
++ if (!dmac->regs)
++ goto out_free_pool;
+
-+ /* show clock tree as derived from the three oscillators
-+ * we "know" are at the head of the list
-+ */
-+ r.s = s;
-+ r.nest = 0;
-+ dump_clock(at32_clock_list[0], &r);
-+ dump_clock(at32_clock_list[1], &r);
-+ dump_clock(at32_clock_list[2], &r);
++ ret = request_irq(platform_get_irq(pdev, 0), dmac_interrupt,
++ IRQF_SAMPLE_RANDOM, pdev->name, dmac);
++ if (ret)
++ goto out_unmap_regs;
++
++ /* Enable the DMA controller */
++ dmac_writel_lo(dmac, CFG, 1);
++
++ register_dma_controller(&dmac->dma);
++
++ printk(KERN_INFO
++ "dmac%d: DesignWare DMA controller at 0x%p irq %d\n",
++ dmac->dma.id, dmac->regs, platform_get_irq(pdev, 0));
+
+ return 0;
-+}
+
-+static int clk_open(struct inode *inode, struct file *file)
-+{
-+ return single_open(file, clk_show, NULL);
++out_unmap_regs:
++ iounmap(dmac->regs);
++out_free_pool:
++ dma_pool_destroy(dmac->lli_pool);
++out_disable_clk:
++ clk_disable(dmac->hclk);
++ clk_put(dmac->hclk);
++out_free_dmac:
++ kfree(dmac);
++ return ret;
+}
+
-+static const struct file_operations clk_operations = {
-+ .open = clk_open,
-+ .read = seq_read,
-+ .llseek = seq_lseek,
-+ .release = single_release,
++static struct platform_driver dmac_driver = {
++ .probe = dmac_probe,
++ .driver = {
++ .name = "dmaca",
++ },
+};
+
-+static int __init clk_debugfs_init(void)
++static int __init dmac_init(void)
+{
-+ (void) debugfs_create_file("at32ap_clk", S_IFREG | S_IRUGO,
-+ NULL, NULL, &clk_operations);
++ return platform_driver_register(&dmac_driver);
++}
++subsys_initcall(dmac_init);
+
-+ return 0;
++static void __exit dmac_exit(void)
++{
++ platform_driver_unregister(&dmac_driver);
+}
-+postcore_initcall(clk_debugfs_init);
++module_exit(dmac_exit);
+
-+#endif
-diff --git a/arch/avr32/mach-at32ap/gpio-dev.c b/arch/avr32/mach-at32ap/gpio-dev.c
-new file mode 100644
-index 0000000..8cf6d11
++MODULE_DESCRIPTION("Synopsys DesignWare DMA Controller driver");
++MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
++MODULE_LICENSE("GPL");
--- /dev/null
-+++ b/arch/avr32/mach-at32ap/gpio-dev.c
-@@ -0,0 +1,573 @@
++++ b/arch/avr32/drivers/dw-dmac.h
+@@ -0,0 +1,42 @@
+/*
-+ * GPIO /dev and configfs interface
++ * Driver for the Synopsys DesignWare DMA Controller
+ *
-+ * Copyright (C) 2006-2007 Atmel Corporation
++ * Copyright (C) 2005-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
-+#include <linux/kernel.h>
-+#include <linux/configfs.h>
-+#include <linux/cdev.h>
-+#include <linux/device.h>
-+#include <linux/fs.h>
-+#include <linux/interrupt.h>
-+#include <linux/module.h>
-+#include <linux/poll.h>
-+#include <linux/uaccess.h>
-+#include <linux/wait.h>
++#ifndef __AVR32_DW_DMAC_H__
++#define __AVR32_DW_DMAC_H__
+
-+#include <asm/gpio.h>
-+#include <asm/arch/portmux.h>
++#define DW_DMAC_CFG 0x398
++#define DW_DMAC_CH_EN 0x3a0
+
-+#define GPIO_DEV_MAX 8
++#define DW_DMAC_STATUS_XFER 0x2e8
++#define DW_DMAC_STATUS_BLOCK 0x2f0
++#define DW_DMAC_STATUS_ERROR 0x308
+
-+static struct class *gpio_dev_class;
-+static dev_t gpio_devt;
++#define DW_DMAC_MASK_XFER 0x310
++#define DW_DMAC_MASK_BLOCK 0x318
++#define DW_DMAC_MASK_ERROR 0x330
+
-+struct gpio_item {
-+ spinlock_t lock;
++#define DW_DMAC_CLEAR_XFER 0x338
++#define DW_DMAC_CLEAR_BLOCK 0x340
++#define DW_DMAC_CLEAR_ERROR 0x358
+
-+ int enabled;
-+ int initialized;
-+ int port;
-+ u32 pin_mask;
-+ u32 oe_mask;
++#define DW_DMAC_STATUS_INT 0x360
+
-+ /* Pin state last time we read it (for blocking reads) */
-+ u32 pin_state;
-+ int changed;
++#define DW_DMAC_CHAN_SAR 0x000
++#define DW_DMAC_CHAN_DAR 0x008
++#define DW_DMAC_CHAN_LLP 0x010
++#define DW_DMAC_CHAN_CTL 0x018
++#define DW_DMAC_CHAN_SSTAT 0x020
++#define DW_DMAC_CHAN_DSTAT 0x028
++#define DW_DMAC_CHAN_SSTATAR 0x030
++#define DW_DMAC_CHAN_DSTATAR 0x038
++#define DW_DMAC_CHAN_CFG 0x040
++#define DW_DMAC_CHAN_SGR 0x048
++#define DW_DMAC_CHAN_DSR 0x050
+
-+ wait_queue_head_t change_wq;
-+ struct fasync_struct *async_queue;
++#endif /* __AVR32_DW_DMAC_H__ */
+--- a/arch/avr32/kernel/Makefile
++++ b/arch/avr32/kernel/Makefile
+@@ -9,6 +9,7 @@ obj-y += syscall_table.o syscall-stub
+ obj-y += setup.o traps.o semaphore.o ocd.o ptrace.o
+ obj-y += signal.o sys_avr32.o process.o time.o
+ obj-y += init_task.o switch_to.o cpu.o
++obj-y += dma-controller.o
+ obj-$(CONFIG_MODULES) += module.o avr32_ksyms.o
+ obj-$(CONFIG_KPROBES) += kprobes.o
+ obj-$(CONFIG_STACKTRACE) += stacktrace.o
+--- a/arch/avr32/kernel/avr32_ksyms.c
++++ b/arch/avr32/kernel/avr32_ksyms.c
+@@ -29,7 +29,9 @@ EXPORT_SYMBOL(__avr32_asr64);
+ */
+ EXPORT_SYMBOL(memset);
+ EXPORT_SYMBOL(memcpy);
+
-+ int id;
-+ struct class_device *gpio_dev;
-+ struct cdev char_dev;
-+ struct config_item item;
-+};
-+
-+struct gpio_attribute {
-+ struct configfs_attribute attr;
-+ ssize_t (*show)(struct gpio_item *, char *);
-+ ssize_t (*store)(struct gpio_item *, const char *, size_t);
-+};
-+
-+static irqreturn_t gpio_dev_interrupt(int irq, void *dev_id)
-+{
-+ struct gpio_item *gpio = dev_id;
-+ u32 old_state, new_state;
-+
-+ old_state = gpio->pin_state;
-+ new_state = at32_gpio_get_value_multiple(gpio->port, gpio->pin_mask);
-+ gpio->pin_state = new_state;
-+
-+ if (new_state != old_state) {
-+ gpio->changed = 1;
-+ wake_up_interruptible(&gpio->change_wq);
-+
-+ if (gpio->async_queue)
-+ kill_fasync(&gpio->async_queue, SIGIO, POLL_IN);
-+ }
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static int gpio_dev_open(struct inode *inode, struct file *file)
-+{
-+ struct gpio_item *gpio = container_of(inode->i_cdev,
-+ struct gpio_item,
-+ char_dev);
-+ unsigned int irq;
-+ unsigned int i;
-+ int ret;
-+
-+ nonseekable_open(inode, file);
-+ config_item_get(&gpio->item);
-+ file->private_data = gpio;
-+
-+ gpio->pin_state = at32_gpio_get_value_multiple(gpio->port,
-+ gpio->pin_mask);
-+ gpio->changed = 1;
-+
-+ for (i = 0; i < 32; i++) {
-+ if (gpio->pin_mask & (1 << i)) {
-+ irq = gpio_to_irq(32 * gpio->port + i);
-+ ret = request_irq(irq, gpio_dev_interrupt, 0,
-+ "gpio-dev", gpio);
-+ if (ret)
-+ goto err_irq;
-+ }
-+ }
-+
-+ return 0;
-+
-+err_irq:
-+ while (i--) {
-+ if (gpio->pin_mask & (1 << i)) {
-+ irq = gpio_to_irq(32 * gpio->port + i);
-+ free_irq(irq, gpio);
-+ }
-+ }
-+
-+ config_item_put(&gpio->item);
-+
-+ return ret;
-+}
-+
-+static int gpio_dev_fasync(int fd, struct file *file, int mode)
-+{
-+ struct gpio_item *gpio = file->private_data;
+ EXPORT_SYMBOL(clear_page);
++EXPORT_SYMBOL(copy_page);
+
+ /*
+ * Userspace access stuff.
+@@ -41,6 +43,8 @@ EXPORT_SYMBOL(strncpy_from_user);
+ EXPORT_SYMBOL(__strncpy_from_user);
+ EXPORT_SYMBOL(clear_user);
+ EXPORT_SYMBOL(__clear_user);
++EXPORT_SYMBOL(strnlen_user);
++
+ EXPORT_SYMBOL(csum_partial);
+ EXPORT_SYMBOL(csum_partial_copy_generic);
+
+--- /dev/null
++++ b/arch/avr32/kernel/dma-controller.c
+@@ -0,0 +1,34 @@
++/*
++ * Preliminary DMA controller framework for AVR32
++ *
++ * Copyright (C) 2005-2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#include <asm/dma-controller.h>
+
-+ return fasync_helper(fd, file, mode, &gpio->async_queue);
-+}
++static LIST_HEAD(controllers);
+
-+static int gpio_dev_release(struct inode *inode, struct file *file)
++int register_dma_controller(struct dma_controller *dmac)
+{
-+ struct gpio_item *gpio = file->private_data;
-+ unsigned int irq;
-+ unsigned int i;
-+
-+ gpio_dev_fasync(-1, file, 0);
-+
-+ for (i = 0; i < 32; i++) {
-+ if (gpio->pin_mask & (1 << i)) {
-+ irq = gpio_to_irq(32 * gpio->port + i);
-+ free_irq(irq, gpio);
-+ }
-+ }
++ static int next_id;
+
-+ config_item_put(&gpio->item);
++ dmac->id = next_id++;
++ list_add_tail(&dmac->list, &controllers);
+
+ return 0;
+}
++EXPORT_SYMBOL(register_dma_controller);
+
-+static unsigned int gpio_dev_poll(struct file *file, poll_table *wait)
++struct dma_controller *find_dma_controller(int id)
+{
-+ struct gpio_item *gpio = file->private_data;
-+ unsigned int mask = 0;
-+
-+ poll_wait(file, &gpio->change_wq, wait);
-+ if (gpio->changed)
-+ mask |= POLLIN | POLLRDNORM;
++ struct dma_controller *dmac;
+
-+ return mask;
++ list_for_each_entry(dmac, &controllers, list)
++ if (dmac->id == id)
++ return dmac;
++ return NULL;
+}
++EXPORT_SYMBOL(find_dma_controller);
+--- a/arch/avr32/kernel/entry-avr32b.S
++++ b/arch/avr32/kernel/entry-avr32b.S
+@@ -74,50 +74,41 @@ exception_vectors:
+ .align 2
+ bral do_dtlb_modified
+
+- /*
+- * r0 : PGD/PT/PTE
+- * r1 : Offending address
+- * r2 : Scratch register
+- * r3 : Cause (5, 12 or 13)
+- */
+ #define tlbmiss_save pushm r0-r3
+ #define tlbmiss_restore popm r0-r3
+
+- .section .tlbx.ex.text,"ax",@progbits
++ .org 0x50
+ .global itlb_miss
+ itlb_miss:
+ tlbmiss_save
+ rjmp tlb_miss_common
+
+- .section .tlbr.ex.text,"ax",@progbits
++ .org 0x60
+ dtlb_miss_read:
+ tlbmiss_save
+ rjmp tlb_miss_common
+
+- .section .tlbw.ex.text,"ax",@progbits
++ .org 0x70
+ dtlb_miss_write:
+ tlbmiss_save
+
+ .global tlb_miss_common
++ .align 2
+ tlb_miss_common:
+ mfsr r0, SYSREG_TLBEAR
+ mfsr r1, SYSREG_PTBR
+
+- /* Is it the vmalloc space? */
+- bld r0, 31
+- brcs handle_vmalloc_miss
+-
+- /* First level lookup */
++ /*
++ * First level lookup: The PGD contains virtual pointers to
++ * the second-level page tables, but they may be NULL if not
++ * present.
++ */
+ pgtbl_lookup:
+ lsr r2, r0, PGDIR_SHIFT
+ ld.w r3, r1[r2 << 2]
+ bfextu r1, r0, PAGE_SHIFT, PGDIR_SHIFT - PAGE_SHIFT
+- bld r3, _PAGE_BIT_PRESENT
+- brcc page_table_not_present
+-
+- /* Translate to virtual address in P1. */
+- andl r3, 0xf000
+- sbr r3, 31
++ cp.w r3, 0
++ breq page_table_not_present
+
+ /* Second level lookup */
+ ld.w r2, r3[r1 << 2]
+@@ -148,16 +139,55 @@ pgtbl_lookup:
+ tlbmiss_restore
+ rete
+
+-handle_vmalloc_miss:
+- /* Simply do the lookup in init's page table */
++ /* The slow path of the TLB miss handler */
++ .align 2
++page_table_not_present:
++ /* Do we need to synchronize with swapper_pg_dir? */
++ bld r0, 31
++ brcs sync_with_swapper_pg_dir
++
++page_not_present:
++ tlbmiss_restore
++ sub sp, 4
++ stmts --sp, r0-lr
++ rcall save_full_context_ex
++ mfsr r12, SYSREG_ECR
++ mov r11, sp
++ rcall do_page_fault
++ rjmp ret_from_exception
++
++ .align 2
++sync_with_swapper_pg_dir:
++ /*
++ * If swapper_pg_dir contains a non-NULL second-level page
++ * table pointer, copy it into the current PGD. If not, we
++ * must handle it as a full-blown page fault.
++ *
++ * Jumping back to pgtbl_lookup causes an unnecessary lookup,
++ * but it is guaranteed to be a cache hit, it won't happen
++ * very often, and we absolutely do not want to sacrifice any
++ * performance in the fast path in order to improve this.
++ */
+ mov r1, lo(swapper_pg_dir)
+ orh r1, hi(swapper_pg_dir)
++ ld.w r3, r1[r2 << 2]
++ cp.w r3, 0
++ breq page_not_present
++ mfsr r1, SYSREG_PTBR
++ st.w r1[r2 << 2], r3
+ rjmp pgtbl_lookup
+
++ /*
++ * We currently have two bytes left at this point until we
++ * crash into the system call handler...
++ *
++ * Don't worry, the assembler will let us know.
++ */
+
-+static ssize_t gpio_dev_read(struct file *file, char __user *buf,
-+ size_t count, loff_t *offset)
-+{
-+ struct gpio_item *gpio = file->private_data;
-+ u32 value;
-+
-+ spin_lock_irq(&gpio->lock);
-+ while (!gpio->changed) {
-+ spin_unlock_irq(&gpio->lock);
-+
-+ if (file->f_flags & O_NONBLOCK)
-+ return -EAGAIN;
-+
-+ if (wait_event_interruptible(gpio->change_wq, gpio->changed))
-+ return -ERESTARTSYS;
-+
-+ spin_lock_irq(&gpio->lock);
-+ }
-+
-+ gpio->changed = 0;
-+ value = at32_gpio_get_value_multiple(gpio->port, gpio->pin_mask);
-+
-+ spin_unlock_irq(&gpio->lock);
-+
-+ count = min(count, (size_t)4);
-+ if (copy_to_user(buf, &value, count))
-+ return -EFAULT;
+
+ /* --- System Call --- */
+
+- .section .scall.text,"ax",@progbits
++ .org 0x100
+ system_call:
+ #ifdef CONFIG_PREEMPT
+ mask_interrupts
+@@ -266,18 +296,6 @@ syscall_exit_work:
+ brcc syscall_exit_cont
+ rjmp enter_monitor_mode
+
+- /* The slow path of the TLB miss handler */
+-page_table_not_present:
+-page_not_present:
+- tlbmiss_restore
+- sub sp, 4
+- stmts --sp, r0-lr
+- rcall save_full_context_ex
+- mfsr r12, SYSREG_ECR
+- mov r11, sp
+- rcall do_page_fault
+- rjmp ret_from_exception
+-
+ /* This function expects to find offending PC in SYSREG_RAR_EX */
+ .type save_full_context_ex, @function
+ .align 2
+@@ -741,26 +759,6 @@ irq_level\level:
+
+ .section .irq.text,"ax",@progbits
+
+-.global cpu_idle_sleep
+-cpu_idle_sleep:
+- mask_interrupts
+- get_thread_info r8
+- ld.w r9, r8[TI_flags]
+- bld r9, TIF_NEED_RESCHED
+- brcs cpu_idle_enable_int_and_exit
+- sbr r9, TIF_CPU_GOING_TO_SLEEP
+- st.w r8[TI_flags], r9
+- unmask_interrupts
+- sleep 0
+-cpu_idle_skip_sleep:
+- mask_interrupts
+- ld.w r9, r8[TI_flags]
+- cbr r9, TIF_CPU_GOING_TO_SLEEP
+- st.w r8[TI_flags], r9
+-cpu_idle_enable_int_and_exit:
+- unmask_interrupts
+- retal r12
+-
+ .global irq_level0
+ .global irq_level1
+ .global irq_level2
+--- a/arch/avr32/kernel/process.c
++++ b/arch/avr32/kernel/process.c
+@@ -18,11 +18,11 @@
+ #include <asm/sysreg.h>
+ #include <asm/ocd.h>
+
++#include <asm/arch/pm.h>
+
-+ return count;
-+}
+ void (*pm_power_off)(void) = NULL;
+ EXPORT_SYMBOL(pm_power_off);
+
+-extern void cpu_idle_sleep(void);
+-
+ /*
+ * This file handles the architecture-dependent parts of process handling..
+ */
+@@ -54,6 +54,8 @@ void machine_halt(void)
+
+ void machine_power_off(void)
+ {
++ if (pm_power_off)
++ pm_power_off();
+ }
+
+ void machine_restart(char *cmd)
+--- a/arch/avr32/kernel/setup.c
++++ b/arch/avr32/kernel/setup.c
+@@ -274,6 +274,8 @@ static int __init early_parse_fbmem(char
+ printk(KERN_WARNING
+ "Failed to allocate framebuffer memory\n");
+ fbmem_size = 0;
++ } else {
++ memset(__va(fbmem_start), 0, fbmem_size);
+ }
+ }
+
+--- a/arch/avr32/kernel/signal.c
++++ b/arch/avr32/kernel/signal.c
+@@ -93,6 +93,9 @@ asmlinkage int sys_rt_sigreturn(struct p
+ if (restore_sigcontext(regs, &frame->uc.uc_mcontext))
+ goto badframe;
+
++ if (do_sigaltstack(&frame->uc.uc_stack, NULL, regs->sp) == -EFAULT)
++ goto badframe;
+
-+static ssize_t gpio_dev_write(struct file *file, const char __user *buf,
-+ size_t count, loff_t *offset)
+ pr_debug("Context restored: pc = %08lx, lr = %08lx, sp = %08lx\n",
+ regs->pc, regs->lr, regs->sp);
+
+--- a/arch/avr32/kernel/time.c
++++ b/arch/avr32/kernel/time.c
+@@ -1,233 +1,147 @@
+ /*
+ * Copyright (C) 2004-2007 Atmel Corporation
+ *
+- * Based on MIPS implementation arch/mips/kernel/time.c
+- * Copyright 2001 MontaVista Software Inc.
+- *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+-
+ #include <linux/clk.h>
+-#include <linux/clocksource.h>
+-#include <linux/time.h>
+-#include <linux/module.h>
++#include <linux/clockchips.h>
++#include <linux/init.h>
+ #include <linux/interrupt.h>
+ #include <linux/irq.h>
+-#include <linux/kernel_stat.h>
+-#include <linux/errno.h>
+-#include <linux/init.h>
+-#include <linux/profile.h>
+-#include <linux/sysdev.h>
+-#include <linux/err.h>
++#include <linux/kernel.h>
++#include <linux/time.h>
+
+-#include <asm/div64.h>
+ #include <asm/sysreg.h>
+-#include <asm/io.h>
+-#include <asm/sections.h>
+
+-/* how many counter cycles in a jiffy? */
+-static u32 cycles_per_jiffy;
++#include <asm/arch/pm.h>
+
+-/* the count value for the next timer interrupt */
+-static u32 expirelo;
+
+-cycle_t __weak read_cycle_count(void)
++static cycle_t read_cycle_count(void)
+ {
+ return (cycle_t)sysreg_read(COUNT);
+ }
+
+-struct clocksource __weak clocksource_avr32 = {
+- .name = "avr32",
+- .rating = 350,
++/*
++ * The architectural cycle count registers are a fine clocksource unless
++ * the system idle loop use sleep states like "idle": the CPU cycles
++ * measured by COUNT (and COMPARE) don't happen during sleep states.
++ * Their duration also changes if cpufreq changes the CPU clock rate.
++ * So we rate the clocksource using COUNT as very low quality.
++ */
++static struct clocksource counter = {
++ .name = "avr32_counter",
++ .rating = 50,
+ .read = read_cycle_count,
+ .mask = CLOCKSOURCE_MASK(32),
+ .shift = 16,
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+ };
+
+-irqreturn_t __weak timer_interrupt(int irq, void *dev_id);
+-
+-struct irqaction timer_irqaction = {
+- .handler = timer_interrupt,
+- .flags = IRQF_DISABLED,
+- .name = "timer",
+-};
+-
+-/*
+- * By default we provide the null RTC ops
+- */
+-static unsigned long null_rtc_get_time(void)
+-{
+- return mktime(2007, 1, 1, 0, 0, 0);
+-}
+-
+-static int null_rtc_set_time(unsigned long sec)
++static irqreturn_t timer_interrupt(int irq, void *dev_id)
+ {
+- return 0;
+-}
+-
+-static unsigned long (*rtc_get_time)(void) = null_rtc_get_time;
+-static int (*rtc_set_time)(unsigned long) = null_rtc_set_time;
++ struct clock_event_device *evdev = dev_id;
+
+-static void avr32_timer_ack(void)
+-{
+- u32 count;
+-
+- /* Ack this timer interrupt and set the next one */
+- expirelo += cycles_per_jiffy;
+- /* setting COMPARE to 0 stops the COUNT-COMPARE */
+- if (expirelo == 0) {
+- sysreg_write(COMPARE, expirelo + 1);
+- } else {
+- sysreg_write(COMPARE, expirelo);
+- }
++ /*
++ * Disable the interrupt until the clockevent subsystem
++ * reprograms it.
++ */
++ sysreg_write(COMPARE, 0);
+
+- /* Check to see if we have missed any timer interrupts */
+- count = sysreg_read(COUNT);
+- if ((count - expirelo) < 0x7fffffff) {
+- expirelo = count + cycles_per_jiffy;
+- sysreg_write(COMPARE, expirelo);
+- }
++ evdev->event_handler(evdev);
++ return IRQ_HANDLED;
+ }
+
+-int __weak avr32_hpt_init(void)
+-{
+- int ret;
+- unsigned long mult, shift, count_hz;
+-
+- count_hz = clk_get_rate(boot_cpu_data.clk);
+- shift = clocksource_avr32.shift;
+- mult = clocksource_hz2mult(count_hz, shift);
+- clocksource_avr32.mult = mult;
+-
+- {
+- u64 tmp;
+-
+- tmp = TICK_NSEC;
+- tmp <<= shift;
+- tmp += mult / 2;
+- do_div(tmp, mult);
+-
+- cycles_per_jiffy = tmp;
+- }
++static struct irqaction timer_irqaction = {
++ .handler = timer_interrupt,
++ .flags = IRQF_TIMER | IRQF_DISABLED,
++ .name = "avr32_comparator",
++};
+
+- ret = setup_irq(0, &timer_irqaction);
+- if (ret) {
+- pr_debug("timer: could not request IRQ 0: %d\n", ret);
+- return -ENODEV;
+- }
++static int comparator_next_event(unsigned long delta,
++ struct clock_event_device *evdev)
+{
-+ struct gpio_item *gpio = file->private_data;
-+ u32 value = 0;
-+ u32 mask = ~0UL;
++ unsigned long flags;
+
+- printk(KERN_INFO "timer: AT32AP COUNT-COMPARE at irq 0, "
+- "%lu.%03lu MHz\n",
+- ((count_hz + 500) / 1000) / 1000,
+- ((count_hz + 500) / 1000) % 1000);
++ raw_local_irq_save(flags);
+
+- return 0;
+-}
++ /* The time to read COUNT then update COMPARE must be less
++ * than the min_delta_ns value for this clockevent source.
++ */
++ sysreg_write(COMPARE, (sysreg_read(COUNT) + delta) ? : 1);
+
+-/*
+- * Taken from MIPS c0_hpt_timer_init().
+- *
+- * The reason COUNT is written twice is probably to make sure we don't get any
+- * timer interrupts while we are messing with the counter.
+- */
+-int __weak avr32_hpt_start(void)
+-{
+- u32 count = sysreg_read(COUNT);
+- expirelo = (count / cycles_per_jiffy + 1) * cycles_per_jiffy;
+- sysreg_write(COUNT, expirelo - cycles_per_jiffy);
+- sysreg_write(COMPARE, expirelo);
+- sysreg_write(COUNT, count);
++ raw_local_irq_restore(flags);
+
+ return 0;
+ }
+
+-/*
+- * local_timer_interrupt() does profiling and process accounting on a
+- * per-CPU basis.
+- *
+- * In UP mode, it is invoked from the (global) timer_interrupt.
+- */
+-void local_timer_interrupt(int irq, void *dev_id)
++static void comparator_mode(enum clock_event_mode mode,
++ struct clock_event_device *evdev)
+ {
+- if (current->pid)
+- profile_tick(CPU_PROFILING);
+- update_process_times(user_mode(get_irq_regs()));
++ switch (mode) {
++ case CLOCK_EVT_MODE_ONESHOT:
++ pr_debug("%s: start\n", evdev->name);
++ /* FALLTHROUGH */
++ case CLOCK_EVT_MODE_RESUME:
++ cpu_disable_idle_sleep();
++ break;
++ case CLOCK_EVT_MODE_UNUSED:
++ case CLOCK_EVT_MODE_SHUTDOWN:
++ sysreg_write(COMPARE, 0);
++ pr_debug("%s: stop\n", evdev->name);
++ cpu_enable_idle_sleep();
++ break;
++ default:
++ BUG();
++ }
+ }
+
+-irqreturn_t __weak timer_interrupt(int irq, void *dev_id)
+-{
+- /* ack timer interrupt and try to set next interrupt */
+- avr32_timer_ack();
+-
+- /*
+- * Call the generic timer interrupt handler
+- */
+- write_seqlock(&xtime_lock);
+- do_timer(1);
+- write_sequnlock(&xtime_lock);
+-
+- /*
+- * In UP mode, we call local_timer_interrupt() to do profiling
+- * and process accounting.
+- *
+- * SMP is not supported yet.
+- */
+- local_timer_interrupt(irq, dev_id);
+-
+- return IRQ_HANDLED;
+-}
++static struct clock_event_device comparator = {
++ .name = "avr32_comparator",
++ .features = CLOCK_EVT_FEAT_ONESHOT,
++ .shift = 16,
++ .rating = 50,
++ .cpumask = CPU_MASK_CPU0,
++ .set_next_event = comparator_next_event,
++ .set_mode = comparator_mode,
++};
+
+ void __init time_init(void)
+ {
++ unsigned long counter_hz;
+ int ret;
+
+- /*
+- * Make sure we don't get any COMPARE interrupts before we can
+- * handle them.
+- */
+- sysreg_write(COMPARE, 0);
+-
+- xtime.tv_sec = rtc_get_time();
++ xtime.tv_sec = mktime(2007, 1, 1, 0, 0, 0);
+ xtime.tv_nsec = 0;
+
+ set_normalized_timespec(&wall_to_monotonic,
+ -xtime.tv_sec, -xtime.tv_nsec);
+
+- ret = avr32_hpt_init();
+- if (ret) {
+- pr_debug("timer: failed setup: %d\n", ret);
+- return;
+- }
++ /* figure rate for counter */
++ counter_hz = clk_get_rate(boot_cpu_data.clk);
++ counter.mult = clocksource_hz2mult(counter_hz, counter.shift);
+
+- ret = clocksource_register(&clocksource_avr32);
++ ret = clocksource_register(&counter);
+ if (ret)
+ pr_debug("timer: could not register clocksource: %d\n", ret);
+
+- ret = avr32_hpt_start();
+- if (ret) {
+- pr_debug("timer: failed starting: %d\n", ret);
+- return;
+- }
+-}
++ /* setup COMPARE clockevent */
++ comparator.mult = div_sc(counter_hz, NSEC_PER_SEC, comparator.shift);
++ comparator.max_delta_ns = clockevent_delta2ns((u32)~0, &comparator);
++ comparator.min_delta_ns = clockevent_delta2ns(50, &comparator) + 1;
+
+-static struct sysdev_class timer_class = {
+- .name = "timer",
+-};
++ sysreg_write(COMPARE, 0);
++ timer_irqaction.dev_id = &comparator;
+
+-static struct sys_device timer_device = {
+- .id = 0,
+- .cls = &timer_class,
+-};
++ ret = setup_irq(0, &timer_irqaction);
++ if (ret)
++ pr_debug("timer: could not request IRQ 0: %d\n", ret);
++ else {
++ clockevents_register_device(&comparator);
+
+-static int __init init_timer_sysfs(void)
+-{
+- int err = sysdev_class_register(&timer_class);
+- if (!err)
+- err = sysdev_register(&timer_device);
+- return err;
++ pr_info("%s: irq 0, %lu.%03lu MHz\n", comparator.name,
++ ((counter_hz + 500) / 1000) / 1000,
++ ((counter_hz + 500) / 1000) % 1000);
++ }
+ }
+-
+-device_initcall(init_timer_sysfs);
+--- a/arch/avr32/kernel/vmlinux.lds.S
++++ b/arch/avr32/kernel/vmlinux.lds.S
+@@ -68,14 +68,6 @@ SECTIONS
+ _evba = .;
+ _text = .;
+ *(.ex.text)
+- . = 0x50;
+- *(.tlbx.ex.text)
+- . = 0x60;
+- *(.tlbr.ex.text)
+- . = 0x70;
+- *(.tlbw.ex.text)
+- . = 0x100;
+- *(.scall.text)
+ *(.irq.text)
+ KPROBES_TEXT
+ TEXT_TEXT
+@@ -107,6 +99,10 @@ SECTIONS
+ */
+ *(.data.init_task)
+
++ /* Then, the page-aligned data */
++ . = ALIGN(PAGE_SIZE);
++ *(.data.page_aligned)
++
+ /* Then, the cacheline aligned data */
+ . = ALIGN(L1_CACHE_BYTES);
+ *(.data.cacheline_aligned)
+--- a/arch/avr32/lib/io-readsb.S
++++ b/arch/avr32/lib/io-readsb.S
+@@ -41,7 +41,7 @@ __raw_readsb:
+ 2: sub r10, -4
+ reteq r12
+
+-3: ld.uh r8, r12[0]
++3: ld.ub r8, r12[0]
+ sub r10, 1
+ st.b r11++, r8
+ brne 3b
+--- a/arch/avr32/mach-at32ap/Kconfig
++++ b/arch/avr32/mach-at32ap/Kconfig
+@@ -26,6 +26,13 @@ config AP700X_8_BIT_SMC
+
+ endchoice
+
++config GPIO_DEV
++ bool "GPIO /dev interface"
++ select CONFIGFS_FS
++ default n
++ help
++ Say `Y' to enable a /dev interface to the GPIO pins.
+
-+ count = min(count, (size_t)4);
-+ if (copy_from_user(&value, buf, count))
-+ return -EFAULT;
+ endmenu
+
+ endif # PLATFORM_AT32AP
+--- a/arch/avr32/mach-at32ap/Makefile
++++ b/arch/avr32/mach-at32ap/Makefile
+@@ -1,4 +1,9 @@
+-obj-y += at32ap.o clock.o intc.o extint.o pio.o hsmc.o
+-obj-$(CONFIG_CPU_AT32AP700X) += at32ap700x.o
+-obj-$(CONFIG_CPU_AT32AP700X) += time-tc.o
++obj-y += pdc.o clock.o intc.o extint.o pio.o hsmc.o
++obj-$(CONFIG_CPU_AT32AP700X) += at32ap700x.o pm-at32ap700x.o
+ obj-$(CONFIG_CPU_FREQ_AT32AP) += cpufreq.o
++obj-$(CONFIG_GPIO_DEV) += gpio-dev.o
++obj-$(CONFIG_PM) += pm.o
+
-+ /* Assuming big endian */
-+ mask <<= (4 - count) * 8;
-+ mask &= gpio->pin_mask;
++ifeq ($(CONFIG_PM_DEBUG),y)
++CFLAGS_pm.o += -DDEBUG
++endif
+--- a/arch/avr32/mach-at32ap/at32ap.c
++++ /dev/null
+@@ -1,56 +0,0 @@
+-/*
+- * Copyright (C) 2006 Atmel Corporation
+- *
+- * This program is free software; you can redistribute it and/or modify
+- * it under the terms of the GNU General Public License version 2 as
+- * published by the Free Software Foundation.
+- */
+-
+-#include <linux/clk.h>
+-#include <linux/err.h>
+-#include <linux/init.h>
+-#include <linux/platform_device.h>
+-
+-#include <asm/arch/init.h>
+-
+-void __init setup_platform(void)
+-{
+- at32_clock_init();
+- at32_portmux_init();
+-}
+-
+-static int __init pdc_probe(struct platform_device *pdev)
+-{
+- struct clk *pclk, *hclk;
+-
+- pclk = clk_get(&pdev->dev, "pclk");
+- if (IS_ERR(pclk)) {
+- dev_err(&pdev->dev, "no pclk defined\n");
+- return PTR_ERR(pclk);
+- }
+- hclk = clk_get(&pdev->dev, "hclk");
+- if (IS_ERR(hclk)) {
+- dev_err(&pdev->dev, "no hclk defined\n");
+- clk_put(pclk);
+- return PTR_ERR(hclk);
+- }
+-
+- clk_enable(pclk);
+- clk_enable(hclk);
+-
+- dev_info(&pdev->dev, "Atmel Peripheral DMA Controller enabled\n");
+- return 0;
+-}
+-
+-static struct platform_driver pdc_driver = {
+- .probe = pdc_probe,
+- .driver = {
+- .name = "pdc",
+- },
+-};
+-
+-static int __init pdc_init(void)
+-{
+- return platform_driver_register(&pdc_driver);
+-}
+-arch_initcall(pdc_init);
+--- a/arch/avr32/mach-at32ap/at32ap700x.c
++++ b/arch/avr32/mach-at32ap/at32ap700x.c
+@@ -6,11 +6,13 @@
+ * published by the Free Software Foundation.
+ */
+ #include <linux/clk.h>
++#include <linux/delay.h>
+ #include <linux/fb.h>
+ #include <linux/init.h>
+ #include <linux/platform_device.h>
+ #include <linux/dma-mapping.h>
+ #include <linux/spi/spi.h>
++#include <linux/usb/atmel_usba_udc.h>
+
+ #include <asm/io.h>
+ #include <asm/irq.h>
+@@ -18,6 +20,7 @@
+ #include <asm/arch/at32ap700x.h>
+ #include <asm/arch/board.h>
+ #include <asm/arch/portmux.h>
++#include <asm/arch/sram.h>
+
+ #include <video/atmel_lcdc.h>
+
+@@ -91,25 +94,18 @@ static struct clk devname##_##_name = {
+
+ static DEFINE_SPINLOCK(pm_lock);
+
+-unsigned long at32ap7000_osc_rates[3] = {
+- [0] = 32768,
+- /* FIXME: these are ATSTK1002-specific */
+- [1] = 20000000,
+- [2] = 12000000,
+-};
++static struct clk osc0;
++static struct clk osc1;
+
+ static unsigned long osc_get_rate(struct clk *clk)
+ {
+- return at32ap7000_osc_rates[clk->index];
++ return at32_board_osc_rates[clk->index];
+ }
+
+ static unsigned long pll_get_rate(struct clk *clk, unsigned long control)
+ {
+ unsigned long div, mul, rate;
+
+- if (!(control & PM_BIT(PLLEN)))
+- return 0;
+-
+ div = PM_BFEXT(PLLDIV, control) + 1;
+ mul = PM_BFEXT(PLLMUL, control) + 1;
+
+@@ -120,6 +116,71 @@ static unsigned long pll_get_rate(struct
+ return rate;
+ }
+
++static long pll_set_rate(struct clk *clk, unsigned long rate,
++ u32 *pll_ctrl)
++{
++ unsigned long mul;
++ unsigned long mul_best_fit = 0;
++ unsigned long div;
++ unsigned long div_min;
++ unsigned long div_max;
++ unsigned long div_best_fit = 0;
++ unsigned long base;
++ unsigned long pll_in;
++ unsigned long actual = 0;
++ unsigned long rate_error;
++ unsigned long rate_error_prev = ~0UL;
++ u32 ctrl;
+
-+ at32_gpio_set_value_multiple(gpio->port, value, mask);
++ /* Rate must be between 80 MHz and 200 Mhz. */
++ if (rate < 80000000UL || rate > 200000000UL)
++ return -EINVAL;
+
-+ return count;
-+}
++ ctrl = PM_BF(PLLOPT, 4);
++ base = clk->parent->get_rate(clk->parent);
+
-+static struct file_operations gpio_dev_fops = {
-+ .owner = THIS_MODULE,
-+ .llseek = no_llseek,
-+ .open = gpio_dev_open,
-+ .release = gpio_dev_release,
-+ .fasync = gpio_dev_fasync,
-+ .poll = gpio_dev_poll,
-+ .read = gpio_dev_read,
-+ .write = gpio_dev_write,
-+};
++ /* PLL input frequency must be between 6 MHz and 32 MHz. */
++ div_min = DIV_ROUND_UP(base, 32000000UL);
++ div_max = base / 6000000UL;
+
-+static struct gpio_item *to_gpio_item(struct config_item *item)
-+{
-+ return item ? container_of(item, struct gpio_item, item) : NULL;
-+}
++ if (div_max < div_min)
++ return -EINVAL;
+
-+static ssize_t gpio_show_gpio_id(struct gpio_item *gpio, char *page)
-+{
-+ return sprintf(page, "%d\n", gpio->port);
-+}
++ for (div = div_min; div <= div_max; div++) {
++ pll_in = (base + div / 2) / div;
++ mul = (rate + pll_in / 2) / pll_in;
+
-+static ssize_t gpio_store_gpio_id(struct gpio_item *gpio,
-+ const char *page, size_t count)
-+{
-+ unsigned long id;
-+ char *p = (char *)page;
-+ ssize_t ret = -EINVAL;
++ if (mul == 0)
++ continue;
+
-+ id = simple_strtoul(p, &p, 0);
-+ if (!p || (*p && (*p != '\n')))
-+ return -EINVAL;
++ actual = pll_in * mul;
++ rate_error = abs(actual - rate);
+
-+ /* Switching PIO is not allowed when live... */
-+ spin_lock(&gpio->lock);
-+ if (!gpio->enabled) {
-+ ret = -ENXIO;
-+ if (at32_gpio_port_is_valid(id)) {
-+ gpio->port = id;
-+ ret = count;
++ if (rate_error < rate_error_prev) {
++ mul_best_fit = mul;
++ div_best_fit = div;
++ rate_error_prev = rate_error;
+ }
++
++ if (rate_error == 0)
++ break;
+ }
-+ spin_unlock(&gpio->lock);
+
-+ return ret;
-+}
++ if (div_best_fit == 0)
++ return -EINVAL;
+
-+static ssize_t gpio_show_pin_mask(struct gpio_item *gpio, char *page)
-+{
-+ return sprintf(page, "0x%08x\n", gpio->pin_mask);
++ ctrl |= PM_BF(PLLMUL, mul_best_fit - 1);
++ ctrl |= PM_BF(PLLDIV, div_best_fit - 1);
++ ctrl |= PM_BF(PLLCOUNT, 16);
++
++ if (clk->parent == &osc1)
++ ctrl |= PM_BIT(PLLOSC);
++
++ *pll_ctrl = ctrl;
++
++ return actual;
+}
+
-+static ssize_t gpio_store_pin_mask(struct gpio_item *gpio,
-+ const char *page, size_t count)
+ static unsigned long pll0_get_rate(struct clk *clk)
+ {
+ u32 control;
+@@ -129,6 +190,41 @@ static unsigned long pll0_get_rate(struc
+ return pll_get_rate(clk, control);
+ }
+
++static void pll1_mode(struct clk *clk, int enabled)
+{
-+ u32 new_mask;
-+ char *p = (char *)page;
-+ ssize_t ret = -EINVAL;
++ unsigned long timeout;
++ u32 status;
++ u32 ctrl;
+
-+ new_mask = simple_strtoul(p, &p, 0);
-+ if (!p || (*p && (*p != '\n')))
-+ return -EINVAL;
++ ctrl = pm_readl(PLL1);
+
-+ /* Can't update the pin mask while live. */
-+ spin_lock(&gpio->lock);
-+ if (!gpio->enabled) {
-+ gpio->oe_mask &= new_mask;
-+ gpio->pin_mask = new_mask;
-+ ret = count;
-+ }
-+ spin_unlock(&gpio->lock);
++ if (enabled) {
++ if (!PM_BFEXT(PLLMUL, ctrl) && !PM_BFEXT(PLLDIV, ctrl)) {
++ pr_debug("clk %s: failed to enable, rate not set\n",
++ clk->name);
++ return;
++ }
+
-+ return ret;
-+}
++ ctrl |= PM_BIT(PLLEN);
++ pm_writel(PLL1, ctrl);
+
-+static ssize_t gpio_show_oe_mask(struct gpio_item *gpio, char *page)
-+{
-+ return sprintf(page, "0x%08x\n", gpio->oe_mask);
++ /* Wait for PLL lock. */
++ for (timeout = 10000; timeout; timeout--) {
++ status = pm_readl(ISR);
++ if (status & PM_BIT(LOCK1))
++ break;
++ udelay(10);
++ }
++
++ if (!(status & PM_BIT(LOCK1)))
++ printk(KERN_ERR "clk %s: timeout waiting for lock\n",
++ clk->name);
++ } else {
++ ctrl &= ~PM_BIT(PLLEN);
++ pm_writel(PLL1, ctrl);
++ }
+}
+
-+static ssize_t gpio_store_oe_mask(struct gpio_item *gpio,
-+ const char *page, size_t count)
+ static unsigned long pll1_get_rate(struct clk *clk)
+ {
+ u32 control;
+@@ -138,6 +234,49 @@ static unsigned long pll1_get_rate(struc
+ return pll_get_rate(clk, control);
+ }
+
++static long pll1_set_rate(struct clk *clk, unsigned long rate, int apply)
+{
-+ u32 mask;
-+ char *p = (char *)page;
-+ ssize_t ret = -EINVAL;
++ u32 ctrl = 0;
++ unsigned long actual_rate;
+
-+ mask = simple_strtoul(p, &p, 0);
-+ if (!p || (*p && (*p != '\n')))
-+ return -EINVAL;
++ actual_rate = pll_set_rate(clk, rate, &ctrl);
+
-+ spin_lock(&gpio->lock);
-+ if (!gpio->enabled) {
-+ gpio->oe_mask = mask & gpio->pin_mask;
-+ ret = count;
++ if (apply) {
++ if (actual_rate != rate)
++ return -EINVAL;
++ if (clk->users > 0)
++ return -EBUSY;
++ pr_debug(KERN_INFO "clk %s: new rate %lu (actual rate %lu)\n",
++ clk->name, rate, actual_rate);
++ pm_writel(PLL1, ctrl);
+ }
-+ spin_unlock(&gpio->lock);
+
-+ return ret;
++ return actual_rate;
+}
+
-+static ssize_t gpio_show_enabled(struct gpio_item *gpio, char *page)
++static int pll1_set_parent(struct clk *clk, struct clk *parent)
+{
-+ return sprintf(page, "%d\n", gpio->enabled);
-+}
++ u32 ctrl;
+
-+static ssize_t gpio_store_enabled(struct gpio_item *gpio,
-+ const char *page, size_t count)
-+{
-+ char *p = (char *)page;
-+ int enabled;
-+ int ret;
++ if (clk->users > 0)
++ return -EBUSY;
+
-+ enabled = simple_strtoul(p, &p, 0);
-+ if (!p || (*p && (*p != '\n')))
++ ctrl = pm_readl(PLL1);
++ WARN_ON(ctrl & PM_BIT(PLLEN));
++
++ if (parent == &osc0)
++ ctrl &= ~PM_BIT(PLLOSC);
++ else if (parent == &osc1)
++ ctrl |= PM_BIT(PLLOSC);
++ else
+ return -EINVAL;
+
-+ /* make it a boolean value */
-+ enabled = !!enabled;
-+
-+ if (gpio->enabled == enabled)
-+ /* No change; do nothing. */
-+ return count;
-+
-+ BUG_ON(gpio->id >= GPIO_DEV_MAX);
-+
-+ if (!enabled) {
-+ class_device_unregister(gpio->gpio_dev);
-+ cdev_del(&gpio->char_dev);
-+ at32_deselect_pins(gpio->port, gpio->pin_mask);
-+ gpio->initialized = 0;
-+ } else {
-+ if (gpio->port < 0 || !gpio->pin_mask)
-+ return -ENODEV;
-+ }
-+
-+ /* Disallow any updates to gpio_id or pin_mask */
-+ spin_lock(&gpio->lock);
-+ gpio->enabled = enabled;
-+ spin_unlock(&gpio->lock);
-+
-+ if (!enabled)
-+ return count;
-+
-+ /* Now, try to allocate the pins */
-+ ret = at32_select_gpio_pins(gpio->port, gpio->pin_mask, gpio->oe_mask);
-+ if (ret)
-+ goto err_alloc_pins;
-+
-+ gpio->initialized = 1;
-+
-+ cdev_init(&gpio->char_dev, &gpio_dev_fops);
-+ gpio->char_dev.owner = THIS_MODULE;
-+ ret = cdev_add(&gpio->char_dev, MKDEV(MAJOR(gpio_devt), gpio->id), 1);
-+ if (ret < 0)
-+ goto err_cdev_add;
-+ gpio->gpio_dev = class_device_create(gpio_dev_class, NULL,
-+ MKDEV(MAJOR(gpio_devt), gpio->id),
-+ NULL,
-+ "gpio%d", gpio->id);
-+ if (IS_ERR(gpio->gpio_dev)) {
-+ printk(KERN_ERR "failed to create gpio%d\n", gpio->id);
-+ ret = PTR_ERR(gpio->gpio_dev);
-+ goto err_class_dev;
-+ }
-+
-+ printk(KERN_INFO "created gpio%d (port%d/0x%08x) as (%d:%d)\n",
-+ gpio->id, gpio->port, gpio->pin_mask,
-+ MAJOR(gpio->gpio_dev->devt), MINOR(gpio->gpio_dev->devt));
++ pm_writel(PLL1, ctrl);
++ clk->parent = parent;
+
+ return 0;
-+
-+err_class_dev:
-+ cdev_del(&gpio->char_dev);
-+err_cdev_add:
-+ at32_deselect_pins(gpio->port, gpio->pin_mask);
-+ gpio->initialized = 0;
-+err_alloc_pins:
-+ spin_lock(&gpio->lock);
-+ gpio->enabled = 0;
-+ spin_unlock(&gpio->lock);
-+
-+ return ret;
+}
+
-+static struct gpio_attribute gpio_item_attr_gpio_id = {
-+ .attr = {
-+ .ca_owner = THIS_MODULE,
-+ .ca_name = "gpio_id",
-+ .ca_mode = S_IRUGO | S_IWUSR,
-+ },
-+ .show = gpio_show_gpio_id,
-+ .store = gpio_store_gpio_id,
+ /*
+ * The AT32AP7000 has five primary clock sources: One 32kHz
+ * oscillator, two crystal oscillators and two PLLs.
+@@ -166,7 +305,10 @@ static struct clk pll0 = {
+ };
+ static struct clk pll1 = {
+ .name = "pll1",
++ .mode = pll1_mode,
+ .get_rate = pll1_get_rate,
++ .set_rate = pll1_set_rate,
++ .set_parent = pll1_set_parent,
+ .parent = &osc0,
+ };
+
+@@ -534,6 +676,14 @@ static struct clk hramc_clk = {
+ .users = 1,
+ .index = 3,
+ };
++static struct clk sdramc_clk = {
++ .name = "sdramc_clk",
++ .parent = &pbb_clk,
++ .mode = pbb_clk_mode,
++ .get_rate = pbb_clk_get_rate,
++ .users = 1,
++ .index = 14,
+};
-+static struct gpio_attribute gpio_item_attr_pin_mask = {
-+ .attr = {
-+ .ca_owner = THIS_MODULE,
-+ .ca_name = "pin_mask",
-+ .ca_mode = S_IRUGO | S_IWUSR,
-+ },
-+ .show = gpio_show_pin_mask,
-+ .store = gpio_store_pin_mask,
+
+ static struct resource smc0_resource[] = {
+ PBMEM(0xfff03400),
+@@ -605,19 +755,32 @@ static inline void set_ebi_sfr_bits(u32
+ }
+
+ /* --------------------------------------------------------------------
+- * System Timer/Counter (TC)
++ * Timer/Counter (TC)
+ * -------------------------------------------------------------------- */
+-static struct resource at32_systc0_resource[] = {
++
++static struct resource at32_tcb0_resource[] = {
+ PBMEM(0xfff00c00),
+ IRQ(22),
+ };
+-struct platform_device at32_systc0_device = {
+- .name = "systc",
++static struct platform_device at32_tcb0_device = {
++ .name = "atmel_tcb",
+ .id = 0,
+- .resource = at32_systc0_resource,
+- .num_resources = ARRAY_SIZE(at32_systc0_resource),
++ .resource = at32_tcb0_resource,
++ .num_resources = ARRAY_SIZE(at32_tcb0_resource),
+};
-+static struct gpio_attribute gpio_item_attr_oe_mask = {
-+ .attr = {
-+ .ca_owner = THIS_MODULE,
-+ .ca_name = "oe_mask",
-+ .ca_mode = S_IRUGO | S_IWUSR,
-+ },
-+ .show = gpio_show_oe_mask,
-+ .store = gpio_store_oe_mask,
++DEV_CLK(t0_clk, at32_tcb0, pbb, 3);
++
++static struct resource at32_tcb1_resource[] = {
++ PBMEM(0xfff01000),
++ IRQ(23),
+};
-+static struct gpio_attribute gpio_item_attr_enabled = {
-+ .attr = {
-+ .ca_owner = THIS_MODULE,
-+ .ca_name = "enabled",
-+ .ca_mode = S_IRUGO | S_IWUSR,
++static struct platform_device at32_tcb1_device = {
++ .name = "atmel_tcb",
++ .id = 1,
++ .resource = at32_tcb1_resource,
++ .num_resources = ARRAY_SIZE(at32_tcb1_resource),
+ };
+-DEV_CLK(pclk, at32_systc0, pbb, 3);
++DEV_CLK(t0_clk, at32_tcb1, pbb, 4);
+
+ /* --------------------------------------------------------------------
+ * PIO
+@@ -669,7 +832,8 @@ void __init at32_add_system_devices(void
+ platform_device_register(&pdc_device);
+ platform_device_register(&dmaca0_device);
+
+- platform_device_register(&at32_systc0_device);
++ platform_device_register(&at32_tcb0_device);
++ platform_device_register(&at32_tcb1_device);
+
+ platform_device_register(&pio0_device);
+ platform_device_register(&pio1_device);
+@@ -679,6 +843,81 @@ void __init at32_add_system_devices(void
+ }
+
+ /* --------------------------------------------------------------------
++ * PSIF
++ * -------------------------------------------------------------------- */
++static struct resource atmel_psif0_resource[] __initdata = {
++ {
++ .start = 0xffe03c00,
++ .end = 0xffe03cff,
++ .flags = IORESOURCE_MEM,
+ },
-+ .show = gpio_show_enabled,
-+ .store = gpio_store_enabled,
++ IRQ(18),
+};
-+
-+static struct configfs_attribute *gpio_item_attrs[] = {
-+ &gpio_item_attr_gpio_id.attr,
-+ &gpio_item_attr_pin_mask.attr,
-+ &gpio_item_attr_oe_mask.attr,
-+ &gpio_item_attr_enabled.attr,
-+ NULL,
++static struct clk atmel_psif0_pclk = {
++ .name = "pclk",
++ .parent = &pba_clk,
++ .mode = pba_clk_mode,
++ .get_rate = pba_clk_get_rate,
++ .index = 15,
+};
+
-+static ssize_t gpio_show_attr(struct config_item *item,
-+ struct configfs_attribute *attr,
-+ char *page)
-+{
-+ struct gpio_item *gpio_item = to_gpio_item(item);
-+ struct gpio_attribute *gpio_attr
-+ = container_of(attr, struct gpio_attribute, attr);
-+ ssize_t ret = 0;
-+
-+ if (gpio_attr->show)
-+ ret = gpio_attr->show(gpio_item, page);
-+ return ret;
-+}
-+
-+static ssize_t gpio_store_attr(struct config_item *item,
-+ struct configfs_attribute *attr,
-+ const char *page, size_t count)
-+{
-+ struct gpio_item *gpio_item = to_gpio_item(item);
-+ struct gpio_attribute *gpio_attr
-+ = container_of(attr, struct gpio_attribute, attr);
-+ ssize_t ret = -EINVAL;
-+
-+ if (gpio_attr->store)
-+ ret = gpio_attr->store(gpio_item, page, count);
-+ return ret;
-+}
-+
-+static void gpio_release(struct config_item *item)
-+{
-+ kfree(to_gpio_item(item));
-+}
-+
-+static struct configfs_item_operations gpio_item_ops = {
-+ .release = gpio_release,
-+ .show_attribute = gpio_show_attr,
-+ .store_attribute = gpio_store_attr,
++static struct resource atmel_psif1_resource[] __initdata = {
++ {
++ .start = 0xffe03d00,
++ .end = 0xffe03dff,
++ .flags = IORESOURCE_MEM,
++ },
++ IRQ(18),
+};
-+
-+static struct config_item_type gpio_item_type = {
-+ .ct_item_ops = &gpio_item_ops,
-+ .ct_attrs = gpio_item_attrs,
-+ .ct_owner = THIS_MODULE,
++static struct clk atmel_psif1_pclk = {
++ .name = "pclk",
++ .parent = &pba_clk,
++ .mode = pba_clk_mode,
++ .get_rate = pba_clk_get_rate,
++ .index = 15,
+};
+
-+static struct config_item *gpio_make_item(struct config_group *group,
-+ const char *name)
++struct platform_device *__init at32_add_device_psif(unsigned int id)
+{
-+ static int next_id;
-+ struct gpio_item *gpio;
++ struct platform_device *pdev;
+
-+ if (next_id >= GPIO_DEV_MAX)
++ if (!(id == 0 || id == 1))
+ return NULL;
+
-+ gpio = kzalloc(sizeof(struct gpio_item), GFP_KERNEL);
-+ if (!gpio)
++ pdev = platform_device_alloc("atmel_psif", id);
++ if (!pdev)
+ return NULL;
+
-+ gpio->id = next_id++;
-+ config_item_init_type_name(&gpio->item, name, &gpio_item_type);
-+ spin_lock_init(&gpio->lock);
-+ init_waitqueue_head(&gpio->change_wq);
++ switch (id) {
++ case 0:
++ if (platform_device_add_resources(pdev, atmel_psif0_resource,
++ ARRAY_SIZE(atmel_psif0_resource)))
++ goto err_add_resources;
++ atmel_psif0_pclk.dev = &pdev->dev;
++ select_peripheral(PA(8), PERIPH_A, 0); /* CLOCK */
++ select_peripheral(PA(9), PERIPH_A, 0); /* DATA */
++ break;
++ case 1:
++ if (platform_device_add_resources(pdev, atmel_psif1_resource,
++ ARRAY_SIZE(atmel_psif1_resource)))
++ goto err_add_resources;
++ atmel_psif1_pclk.dev = &pdev->dev;
++ select_peripheral(PB(11), PERIPH_A, 0); /* CLOCK */
++ select_peripheral(PB(12), PERIPH_A, 0); /* DATA */
++ break;
++ default:
++ return NULL;
++ }
+
-+ return &gpio->item;
-+}
++ platform_device_add(pdev);
++ return pdev;
+
-+static void gpio_drop_item(struct config_group *group,
-+ struct config_item *item)
-+{
-+ struct gpio_item *gpio = to_gpio_item(item);
++err_add_resources:
++ platform_device_put(pdev);
++ return NULL;
++}
+
-+ spin_lock(&gpio->lock);
-+ if (gpio->enabled) {
-+ class_device_unregister(gpio->gpio_dev);
-+ cdev_del(&gpio->char_dev);
-+ }
++/* --------------------------------------------------------------------
+ * USART
+ * -------------------------------------------------------------------- */
+
+@@ -951,7 +1190,8 @@ at32_add_device_spi(unsigned int id, str
+ switch (id) {
+ case 0:
+ pdev = &atmel_spi0_device;
+- select_peripheral(PA(0), PERIPH_A, 0); /* MISO */
++ /* pullup MISO so a level is always defined */
++ select_peripheral(PA(0), PERIPH_A, AT32_GPIOF_PULLUP);
+ select_peripheral(PA(1), PERIPH_A, 0); /* MOSI */
+ select_peripheral(PA(2), PERIPH_A, 0); /* SCK */
+ at32_spi_setup_slaves(0, b, n, spi0_pins);
+@@ -959,7 +1199,8 @@ at32_add_device_spi(unsigned int id, str
+
+ case 1:
+ pdev = &atmel_spi1_device;
+- select_peripheral(PB(0), PERIPH_B, 0); /* MISO */
++ /* pullup MISO so a level is always defined */
++ select_peripheral(PB(0), PERIPH_B, AT32_GPIOF_PULLUP);
+ select_peripheral(PB(1), PERIPH_B, 0); /* MOSI */
+ select_peripheral(PB(5), PERIPH_B, 0); /* SCK */
+ at32_spi_setup_slaves(1, b, n, spi1_pins);
+@@ -989,7 +1230,9 @@ static struct clk atmel_twi0_pclk = {
+ .index = 2,
+ };
+
+-struct platform_device *__init at32_add_device_twi(unsigned int id)
++struct platform_device *__init at32_add_device_twi(unsigned int id,
++ struct i2c_board_info *b,
++ unsigned int n)
+ {
+ struct platform_device *pdev;
+
+@@ -1009,6 +1252,9 @@ struct platform_device *__init at32_add_
+
+ atmel_twi0_pclk.dev = &pdev->dev;
+
++ if (b)
++ i2c_register_board_info(id, b, n);
+
-+ if (gpio->initialized) {
-+ at32_deselect_pins(gpio->port, gpio->pin_mask);
-+ gpio->initialized = 0;
-+ gpio->enabled = 0;
+ platform_device_add(pdev);
+ return pdev;
+
+@@ -1032,7 +1278,8 @@ static struct clk atmel_mci0_pclk = {
+ .index = 9,
+ };
+
+-struct platform_device *__init at32_add_device_mci(unsigned int id)
++struct platform_device *__init
++at32_add_device_mci(unsigned int id, struct mci_platform_data *data)
+ {
+ struct platform_device *pdev;
+
+@@ -1041,11 +1288,15 @@ struct platform_device *__init at32_add_
+
+ pdev = platform_device_alloc("atmel_mci", id);
+ if (!pdev)
+- return NULL;
++ goto fail;
+
+ if (platform_device_add_resources(pdev, atmel_mci0_resource,
+ ARRAY_SIZE(atmel_mci0_resource)))
+- goto err_add_resources;
++ goto fail;
++
++ if (data && platform_device_add_data(pdev, data,
++ sizeof(struct mci_platform_data)))
++ goto fail;
+
+ select_peripheral(PA(10), PERIPH_A, 0); /* CLK */
+ select_peripheral(PA(11), PERIPH_A, 0); /* CMD */
+@@ -1054,12 +1305,19 @@ struct platform_device *__init at32_add_
+ select_peripheral(PA(14), PERIPH_A, 0); /* DATA2 */
+ select_peripheral(PA(15), PERIPH_A, 0); /* DATA3 */
+
++ if (data) {
++ if (data->detect_pin != GPIO_PIN_NONE)
++ at32_select_gpio(data->detect_pin, 0);
++ if (data->wp_pin != GPIO_PIN_NONE)
++ at32_select_gpio(data->wp_pin, 0);
+ }
-+ spin_unlock(&gpio->lock);
-+}
+
-+static struct configfs_group_operations gpio_group_ops = {
-+ .make_item = gpio_make_item,
-+ .drop_item = gpio_drop_item,
-+};
-+
-+static struct config_item_type gpio_group_type = {
-+ .ct_group_ops = &gpio_group_ops,
-+ .ct_owner = THIS_MODULE,
+ atmel_mci0_pclk.dev = &pdev->dev;
+
+ platform_device_add(pdev);
+ return pdev;
+
+-err_add_resources:
++fail:
+ platform_device_put(pdev);
+ return NULL;
+ }
+@@ -1097,7 +1355,8 @@ static struct clk atmel_lcdfb0_pixclk =
+
+ struct platform_device *__init
+ at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
+- unsigned long fbmem_start, unsigned long fbmem_len)
++ unsigned long fbmem_start, unsigned long fbmem_len,
++ unsigned int pin_config)
+ {
+ struct platform_device *pdev;
+ struct atmel_lcdfb_info *info;
+@@ -1124,37 +1383,77 @@ at32_add_device_lcdc(unsigned int id, st
+ switch (id) {
+ case 0:
+ pdev = &atmel_lcdfb0_device;
+- select_peripheral(PC(19), PERIPH_A, 0); /* CC */
+- select_peripheral(PC(20), PERIPH_A, 0); /* HSYNC */
+- select_peripheral(PC(21), PERIPH_A, 0); /* PCLK */
+- select_peripheral(PC(22), PERIPH_A, 0); /* VSYNC */
+- select_peripheral(PC(23), PERIPH_A, 0); /* DVAL */
+- select_peripheral(PC(24), PERIPH_A, 0); /* MODE */
+- select_peripheral(PC(25), PERIPH_A, 0); /* PWR */
+- select_peripheral(PC(26), PERIPH_A, 0); /* DATA0 */
+- select_peripheral(PC(27), PERIPH_A, 0); /* DATA1 */
+- select_peripheral(PC(28), PERIPH_A, 0); /* DATA2 */
+- select_peripheral(PC(29), PERIPH_A, 0); /* DATA3 */
+- select_peripheral(PC(30), PERIPH_A, 0); /* DATA4 */
+- select_peripheral(PC(31), PERIPH_A, 0); /* DATA5 */
+- select_peripheral(PD(0), PERIPH_A, 0); /* DATA6 */
+- select_peripheral(PD(1), PERIPH_A, 0); /* DATA7 */
+- select_peripheral(PD(2), PERIPH_A, 0); /* DATA8 */
+- select_peripheral(PD(3), PERIPH_A, 0); /* DATA9 */
+- select_peripheral(PD(4), PERIPH_A, 0); /* DATA10 */
+- select_peripheral(PD(5), PERIPH_A, 0); /* DATA11 */
+- select_peripheral(PD(6), PERIPH_A, 0); /* DATA12 */
+- select_peripheral(PD(7), PERIPH_A, 0); /* DATA13 */
+- select_peripheral(PD(8), PERIPH_A, 0); /* DATA14 */
+- select_peripheral(PD(9), PERIPH_A, 0); /* DATA15 */
+- select_peripheral(PD(10), PERIPH_A, 0); /* DATA16 */
+- select_peripheral(PD(11), PERIPH_A, 0); /* DATA17 */
+- select_peripheral(PD(12), PERIPH_A, 0); /* DATA18 */
+- select_peripheral(PD(13), PERIPH_A, 0); /* DATA19 */
+- select_peripheral(PD(14), PERIPH_A, 0); /* DATA20 */
+- select_peripheral(PD(15), PERIPH_A, 0); /* DATA21 */
+- select_peripheral(PD(16), PERIPH_A, 0); /* DATA22 */
+- select_peripheral(PD(17), PERIPH_A, 0); /* DATA23 */
++
++ switch (pin_config) {
++ case 0:
++ select_peripheral(PC(19), PERIPH_A, 0); /* CC */
++ select_peripheral(PC(20), PERIPH_A, 0); /* HSYNC */
++ select_peripheral(PC(21), PERIPH_A, 0); /* PCLK */
++ select_peripheral(PC(22), PERIPH_A, 0); /* VSYNC */
++ select_peripheral(PC(23), PERIPH_A, 0); /* DVAL */
++ select_peripheral(PC(24), PERIPH_A, 0); /* MODE */
++ select_peripheral(PC(25), PERIPH_A, 0); /* PWR */
++ select_peripheral(PC(26), PERIPH_A, 0); /* DATA0 */
++ select_peripheral(PC(27), PERIPH_A, 0); /* DATA1 */
++ select_peripheral(PC(28), PERIPH_A, 0); /* DATA2 */
++ select_peripheral(PC(29), PERIPH_A, 0); /* DATA3 */
++ select_peripheral(PC(30), PERIPH_A, 0); /* DATA4 */
++ select_peripheral(PC(31), PERIPH_A, 0); /* DATA5 */
++ select_peripheral(PD(0), PERIPH_A, 0); /* DATA6 */
++ select_peripheral(PD(1), PERIPH_A, 0); /* DATA7 */
++ select_peripheral(PD(2), PERIPH_A, 0); /* DATA8 */
++ select_peripheral(PD(3), PERIPH_A, 0); /* DATA9 */
++ select_peripheral(PD(4), PERIPH_A, 0); /* DATA10 */
++ select_peripheral(PD(5), PERIPH_A, 0); /* DATA11 */
++ select_peripheral(PD(6), PERIPH_A, 0); /* DATA12 */
++ select_peripheral(PD(7), PERIPH_A, 0); /* DATA13 */
++ select_peripheral(PD(8), PERIPH_A, 0); /* DATA14 */
++ select_peripheral(PD(9), PERIPH_A, 0); /* DATA15 */
++ select_peripheral(PD(10), PERIPH_A, 0); /* DATA16 */
++ select_peripheral(PD(11), PERIPH_A, 0); /* DATA17 */
++ select_peripheral(PD(12), PERIPH_A, 0); /* DATA18 */
++ select_peripheral(PD(13), PERIPH_A, 0); /* DATA19 */
++ select_peripheral(PD(14), PERIPH_A, 0); /* DATA20 */
++ select_peripheral(PD(15), PERIPH_A, 0); /* DATA21 */
++ select_peripheral(PD(16), PERIPH_A, 0); /* DATA22 */
++ select_peripheral(PD(17), PERIPH_A, 0); /* DATA23 */
++ break;
++ case 1:
++ select_peripheral(PE(0), PERIPH_B, 0); /* CC */
++ select_peripheral(PC(20), PERIPH_A, 0); /* HSYNC */
++ select_peripheral(PC(21), PERIPH_A, 0); /* PCLK */
++ select_peripheral(PC(22), PERIPH_A, 0); /* VSYNC */
++ select_peripheral(PE(1), PERIPH_B, 0); /* DVAL */
++ select_peripheral(PE(2), PERIPH_B, 0); /* MODE */
++ select_peripheral(PC(25), PERIPH_A, 0); /* PWR */
++ select_peripheral(PE(3), PERIPH_B, 0); /* DATA0 */
++ select_peripheral(PE(4), PERIPH_B, 0); /* DATA1 */
++ select_peripheral(PE(5), PERIPH_B, 0); /* DATA2 */
++ select_peripheral(PE(6), PERIPH_B, 0); /* DATA3 */
++ select_peripheral(PE(7), PERIPH_B, 0); /* DATA4 */
++ select_peripheral(PC(31), PERIPH_A, 0); /* DATA5 */
++ select_peripheral(PD(0), PERIPH_A, 0); /* DATA6 */
++ select_peripheral(PD(1), PERIPH_A, 0); /* DATA7 */
++ select_peripheral(PE(8), PERIPH_B, 0); /* DATA8 */
++ select_peripheral(PE(9), PERIPH_B, 0); /* DATA9 */
++ select_peripheral(PE(10), PERIPH_B, 0); /* DATA10 */
++ select_peripheral(PE(11), PERIPH_B, 0); /* DATA11 */
++ select_peripheral(PE(12), PERIPH_B, 0); /* DATA12 */
++ select_peripheral(PD(7), PERIPH_A, 0); /* DATA13 */
++ select_peripheral(PD(8), PERIPH_A, 0); /* DATA14 */
++ select_peripheral(PD(9), PERIPH_A, 0); /* DATA15 */
++ select_peripheral(PE(13), PERIPH_B, 0); /* DATA16 */
++ select_peripheral(PE(14), PERIPH_B, 0); /* DATA17 */
++ select_peripheral(PE(15), PERIPH_B, 0); /* DATA18 */
++ select_peripheral(PE(16), PERIPH_B, 0); /* DATA19 */
++ select_peripheral(PE(17), PERIPH_B, 0); /* DATA20 */
++ select_peripheral(PE(18), PERIPH_B, 0); /* DATA21 */
++ select_peripheral(PD(16), PERIPH_A, 0); /* DATA22 */
++ select_peripheral(PD(17), PERIPH_A, 0); /* DATA23 */
++ break;
++ default:
++ goto err_invalid_id;
++ }
+
+ clk_set_parent(&atmel_lcdfb0_pixclk, &pll0);
+ clk_set_rate(&atmel_lcdfb0_pixclk, clk_get_rate(&pll0));
+@@ -1351,9 +1650,39 @@ static struct clk usba0_hclk = {
+ .index = 6,
+ };
+
++#define EP(nam, idx, maxpkt, maxbk, dma, isoc) \
++ [idx] = { \
++ .name = nam, \
++ .index = idx, \
++ .fifo_size = maxpkt, \
++ .nr_banks = maxbk, \
++ .can_dma = dma, \
++ .can_isoc = isoc, \
++ }
++
++static struct usba_ep_data at32_usba_ep[] __initdata = {
++ EP("ep0", 0, 64, 1, 0, 0),
++ EP("ep1", 1, 512, 2, 1, 1),
++ EP("ep2", 2, 512, 2, 1, 1),
++ EP("ep3-int", 3, 64, 3, 1, 0),
++ EP("ep4-int", 4, 64, 3, 1, 0),
++ EP("ep5", 5, 1024, 3, 1, 1),
++ EP("ep6", 6, 1024, 3, 1, 1),
+};
+
-+static struct configfs_subsystem gpio_subsys = {
-+ .su_group = {
-+ .cg_item = {
-+ .ci_namebuf = "gpio",
-+ .ci_type = &gpio_group_type,
-+ },
++#undef EP
++
+ struct platform_device *__init
+ at32_add_device_usba(unsigned int id, struct usba_platform_data *data)
+ {
++ /*
++ * pdata doesn't have room for any endpoints, so we need to
++ * append room for the ones we need right after it.
++ */
++ struct {
++ struct usba_platform_data pdata;
++ struct usba_ep_data ep[7];
++ } usba_data;
+ struct platform_device *pdev;
+
+ if (id != 0)
+@@ -1367,13 +1696,20 @@ at32_add_device_usba(unsigned int id, st
+ ARRAY_SIZE(usba0_resource)))
+ goto out_free_pdev;
+
+- if (data) {
+- if (platform_device_add_data(pdev, data, sizeof(*data)))
+- goto out_free_pdev;
++ if (data)
++ usba_data.pdata.vbus_pin = data->vbus_pin;
++ else
++ usba_data.pdata.vbus_pin = -EINVAL;
+
+- if (data->vbus_pin != GPIO_PIN_NONE)
+- at32_select_gpio(data->vbus_pin, 0);
+- }
++ data = &usba_data.pdata;
++ data->num_ep = ARRAY_SIZE(at32_usba_ep);
++ memcpy(data->ep, at32_usba_ep, sizeof(at32_usba_ep));
++
++ if (platform_device_add_data(pdev, data, sizeof(usba_data)))
++ goto out_free_pdev;
++
++ if (data->vbus_pin >= 0)
++ at32_select_gpio(data->vbus_pin, 0);
+
+ usba0_pclk.dev = &pdev->dev;
+ usba0_hclk.dev = &pdev->dev;
+@@ -1526,6 +1862,58 @@ fail:
+ #endif
+
+ /* --------------------------------------------------------------------
++ * NAND Flash / SmartMedia
++ * -------------------------------------------------------------------- */
++static struct resource smc_cs3_resource[] __initdata = {
++ {
++ .start = 0x0c000000,
++ .end = 0x0fffffff,
++ .flags = IORESOURCE_MEM,
++ }, {
++ .start = 0xfff03c00,
++ .end = 0xfff03fff,
++ .flags = IORESOURCE_MEM,
+ },
+};
+
-+static int __init gpio_dev_init(void)
++struct platform_device *__init
++at32_add_device_nand(unsigned int id, struct atmel_nand_data *data)
+{
-+ int err;
++ struct platform_device *pdev;
+
-+ gpio_dev_class = class_create(THIS_MODULE, "gpio-dev");
-+ if (IS_ERR(gpio_dev_class)) {
-+ err = PTR_ERR(gpio_dev_class);
-+ goto err_class_create;
-+ }
++ if (id != 0 || !data)
++ return NULL;
+
-+ err = alloc_chrdev_region(&gpio_devt, 0, GPIO_DEV_MAX, "gpio");
-+ if (err < 0)
-+ goto err_alloc_chrdev;
++ pdev = platform_device_alloc("atmel_nand", id);
++ if (!pdev)
++ goto fail;
+
-+ /* Configfs initialization */
-+ config_group_init(&gpio_subsys.su_group);
-+ mutex_init(&gpio_subsys.su_mutex);
-+ err = configfs_register_subsystem(&gpio_subsys);
-+ if (err)
-+ goto err_register_subsys;
++ if (platform_device_add_resources(pdev, smc_cs3_resource,
++ ARRAY_SIZE(smc_cs3_resource)))
++ goto fail;
+
-+ return 0;
++ if (platform_device_add_data(pdev, data,
++ sizeof(struct atmel_nand_data)))
++ goto fail;
+
-+err_register_subsys:
-+ unregister_chrdev_region(gpio_devt, GPIO_DEV_MAX);
-+err_alloc_chrdev:
-+ class_destroy(gpio_dev_class);
-+err_class_create:
-+ printk(KERN_WARNING "Failed to initialize gpio /dev interface\n");
-+ return err;
++ set_ebi_sfr_bits(HMATRIX_BIT(CS3A));
++ if (data->enable_pin)
++ at32_select_gpio(data->enable_pin,
++ AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
++ if (data->rdy_pin)
++ at32_select_gpio(data->rdy_pin, 0);
++ if (data->det_pin)
++ at32_select_gpio(data->det_pin, 0);
++
++ platform_device_add(pdev);
++ return pdev;
++
++fail:
++ platform_device_put(pdev);
++ return NULL;
+}
-+late_initcall(gpio_dev_init);
-diff --git a/arch/avr32/mach-at32ap/hsmc.c b/arch/avr32/mach-at32ap/hsmc.c
-index 5e22a75..704607f 100644
---- a/arch/avr32/mach-at32ap/hsmc.c
-+++ b/arch/avr32/mach-at32ap/hsmc.c
-@@ -29,16 +29,25 @@ struct hsmc {
-
- static struct hsmc *hsmc;
++
++/* --------------------------------------------------------------------
+ * AC97C
+ * -------------------------------------------------------------------- */
+ static struct resource atmel_ac97c0_resource[] __initdata = {
+@@ -1540,9 +1928,11 @@ static struct clk atmel_ac97c0_pclk = {
+ .index = 10,
+ };
--int smc_set_configuration(int cs, const struct smc_config *config)
-+void smc_set_timing(struct smc_config *config,
-+ const struct smc_timing *timing)
+-struct platform_device *__init at32_add_device_ac97c(unsigned int id)
++struct platform_device *__init
++at32_add_device_ac97c(unsigned int id, struct ac97c_platform_data *data)
{
-+ int recover;
-+ int cycle;
+ struct platform_device *pdev;
++ struct ac97c_platform_data _data;
+
+ if (id != 0)
+ return NULL;
+@@ -1553,19 +1943,37 @@ struct platform_device *__init at32_add_
+
+ if (platform_device_add_resources(pdev, atmel_ac97c0_resource,
+ ARRAY_SIZE(atmel_ac97c0_resource)))
+- goto err_add_resources;
++ goto fail;
+
+- select_peripheral(PB(20), PERIPH_B, 0); /* SYNC */
+- select_peripheral(PB(21), PERIPH_B, 0); /* SDO */
+- select_peripheral(PB(22), PERIPH_B, 0); /* SDI */
+- select_peripheral(PB(23), PERIPH_B, 0); /* SCLK */
++ if (!data) {
++ data = &_data;
++ memset(data, 0, sizeof(struct ac97c_platform_data));
++ data->reset_pin = GPIO_PIN_NONE;
++ }
++
++ data->dma_rx_periph_id = 3;
++ data->dma_tx_periph_id = 4;
++ data->dma_controller_id = 0;
+
- unsigned long mul;
-- unsigned long offset;
-- u32 setup, pulse, cycle, mode;
++ if (platform_device_add_data(pdev, data,
++ sizeof(struct ac97c_platform_data)))
++ goto fail;
++
++ select_peripheral(PB(20), PERIPH_B, 0); /* SDO */
++ select_peripheral(PB(21), PERIPH_B, 0); /* SYNC */
++ select_peripheral(PB(22), PERIPH_B, 0); /* SCLK */
++ select_peripheral(PB(23), PERIPH_B, 0); /* SDI */
++
++ /* TODO: gpio_is_valid(data->reset_pin) with kernel 2.6.26. */
++ if (data->reset_pin != GPIO_PIN_NONE)
++ at32_select_gpio(data->reset_pin, 0);
-- if (!hsmc)
-- return -ENODEV;
-- if (cs >= NR_CHIP_SELECTS)
-- return -EINVAL;
-+ /* Reset all SMC timings */
-+ config->ncs_read_setup = 0;
-+ config->nrd_setup = 0;
-+ config->ncs_write_setup = 0;
-+ config->nwe_setup = 0;
-+ config->ncs_read_pulse = 0;
-+ config->nrd_pulse = 0;
-+ config->ncs_write_pulse = 0;
-+ config->nwe_pulse = 0;
-+ config->read_cycle = 0;
-+ config->write_cycle = 0;
+ atmel_ac97c0_pclk.dev = &pdev->dev;
- /*
- * cycles = x / T = x * f
-@@ -50,16 +59,102 @@ int smc_set_configuration(int cs, const struct smc_config *config)
+ platform_device_add(pdev);
+ return pdev;
- #define ns2cyc(x) ((((x) * mul) + 65535) >> 16)
+-err_add_resources:
++fail:
+ platform_device_put(pdev);
+ return NULL;
+ }
+@@ -1683,6 +2091,7 @@ struct clk *at32_clock_list[] = {
+ &hmatrix_clk,
+ &ebi_clk,
+ &hramc_clk,
++ &sdramc_clk,
+ &smc0_pclk,
+ &smc0_mck,
+ &pdc_hclk,
+@@ -1694,7 +2103,10 @@ struct clk *at32_clock_list[] = {
+ &pio2_mck,
+ &pio3_mck,
+ &pio4_mck,
+- &at32_systc0_pclk,
++ &at32_tcb0_t0_clk,
++ &at32_tcb1_t0_clk,
++ &atmel_psif0_pclk,
++ &atmel_psif1_pclk,
+ &atmel_usart0_usart,
+ &atmel_usart1_usart,
+ &atmel_usart2_usart,
+@@ -1730,16 +2142,7 @@ struct clk *at32_clock_list[] = {
+ };
+ unsigned int at32_nr_clocks = ARRAY_SIZE(at32_clock_list);
-- setup = (HSMC_BF(NWE_SETUP, ns2cyc(config->nwe_setup))
-- | HSMC_BF(NCS_WR_SETUP, ns2cyc(config->ncs_write_setup))
-- | HSMC_BF(NRD_SETUP, ns2cyc(config->nrd_setup))
-- | HSMC_BF(NCS_RD_SETUP, ns2cyc(config->ncs_read_setup)));
-- pulse = (HSMC_BF(NWE_PULSE, ns2cyc(config->nwe_pulse))
-- | HSMC_BF(NCS_WR_PULSE, ns2cyc(config->ncs_write_pulse))
-- | HSMC_BF(NRD_PULSE, ns2cyc(config->nrd_pulse))
-- | HSMC_BF(NCS_RD_PULSE, ns2cyc(config->ncs_read_pulse)));
-- cycle = (HSMC_BF(NWE_CYCLE, ns2cyc(config->write_cycle))
-- | HSMC_BF(NRD_CYCLE, ns2cyc(config->read_cycle)));
-+ if (timing->ncs_read_setup > 0)
-+ config->ncs_read_setup = ns2cyc(timing->ncs_read_setup);
+-void __init at32_portmux_init(void)
+-{
+- at32_init_pio(&pio0_device);
+- at32_init_pio(&pio1_device);
+- at32_init_pio(&pio2_device);
+- at32_init_pio(&pio3_device);
+- at32_init_pio(&pio4_device);
+-}
+-
+-void __init at32_clock_init(void)
++void __init setup_platform(void)
+ {
+ u32 cpu_mask = 0, hsb_mask = 0, pba_mask = 0, pbb_mask = 0;
+ int i;
+@@ -1794,4 +2197,36 @@ void __init at32_clock_init(void)
+ pm_writel(HSB_MASK, hsb_mask);
+ pm_writel(PBA_MASK, pba_mask);
+ pm_writel(PBB_MASK, pbb_mask);
+
-+ if (timing->nrd_setup > 0)
-+ config->nrd_setup = ns2cyc(timing->nrd_setup);
++ /* Initialize the port muxes */
++ at32_init_pio(&pio0_device);
++ at32_init_pio(&pio1_device);
++ at32_init_pio(&pio2_device);
++ at32_init_pio(&pio3_device);
++ at32_init_pio(&pio4_device);
++}
+
-+ if (timing->ncs_write_setup > 0)
-+ config->ncs_write_setup = ns2cyc(timing->ncs_write_setup);
++struct gen_pool *sram_pool;
+
-+ if (timing->nwe_setup > 0)
-+ config->nwe_setup = ns2cyc(timing->nwe_setup);
++static int __init sram_init(void)
++{
++ struct gen_pool *pool;
+
-+ if (timing->ncs_read_pulse > 0)
-+ config->ncs_read_pulse = ns2cyc(timing->ncs_read_pulse);
++ /* 1KiB granularity */
++ pool = gen_pool_create(10, -1);
++ if (!pool)
++ goto fail;
+
-+ if (timing->nrd_pulse > 0)
-+ config->nrd_pulse = ns2cyc(timing->nrd_pulse);
++ if (gen_pool_add(pool, 0x24000000, 0x8000, -1))
++ goto err_pool_add;
+
-+ if (timing->ncs_write_pulse > 0)
-+ config->ncs_write_pulse = ns2cyc(timing->ncs_write_pulse);
++ sram_pool = pool;
++ return 0;
+
-+ if (timing->nwe_pulse > 0)
-+ config->nwe_pulse = ns2cyc(timing->nwe_pulse);
++err_pool_add:
++ gen_pool_destroy(pool);
++fail:
++ pr_err("Failed to create SRAM pool\n");
++ return -ENOMEM;
+ }
++core_initcall(sram_init);
+--- a/arch/avr32/mach-at32ap/cpufreq.c
++++ b/arch/avr32/mach-at32ap/cpufreq.c
+@@ -108,5 +108,4 @@ static int __init at32_cpufreq_init(void
+ {
+ return cpufreq_register_driver(&at32_driver);
+ }
+-
+-arch_initcall(at32_cpufreq_init);
++late_initcall(at32_cpufreq_init);
+--- /dev/null
++++ b/arch/avr32/mach-at32ap/gpio-dev.c
+@@ -0,0 +1,573 @@
++/*
++ * GPIO /dev and configfs interface
++ *
++ * Copyright (C) 2006-2007 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#include <linux/kernel.h>
++#include <linux/configfs.h>
++#include <linux/cdev.h>
++#include <linux/device.h>
++#include <linux/fs.h>
++#include <linux/interrupt.h>
++#include <linux/module.h>
++#include <linux/poll.h>
++#include <linux/uaccess.h>
++#include <linux/wait.h>
+
-+ if (timing->read_cycle > 0)
-+ config->read_cycle = ns2cyc(timing->read_cycle);
++#include <asm/gpio.h>
++#include <asm/arch/portmux.h>
+
-+ if (timing->write_cycle > 0)
-+ config->write_cycle = ns2cyc(timing->write_cycle);
++#define GPIO_DEV_MAX 8
+
-+ /* Extend read cycle in needed */
-+ if (timing->ncs_read_recover > 0)
-+ recover = ns2cyc(timing->ncs_read_recover);
-+ else
-+ recover = 1;
++static struct class *gpio_dev_class;
++static dev_t gpio_devt;
+
-+ cycle = config->ncs_read_setup + config->ncs_read_pulse + recover;
++struct gpio_item {
++ spinlock_t lock;
+
-+ if (config->read_cycle < cycle)
-+ config->read_cycle = cycle;
++ int enabled;
++ int initialized;
++ int port;
++ u32 pin_mask;
++ u32 oe_mask;
+
-+ /* Extend read cycle in needed */
-+ if (timing->nrd_recover > 0)
-+ recover = ns2cyc(timing->nrd_recover);
-+ else
-+ recover = 1;
++ /* Pin state last time we read it (for blocking reads) */
++ u32 pin_state;
++ int changed;
+
-+ cycle = config->nrd_setup + config->nrd_pulse + recover;
++ wait_queue_head_t change_wq;
++ struct fasync_struct *async_queue;
+
-+ if (config->read_cycle < cycle)
-+ config->read_cycle = cycle;
++ int id;
++ struct class_device *gpio_dev;
++ struct cdev char_dev;
++ struct config_item item;
++};
+
-+ /* Extend write cycle in needed */
-+ if (timing->ncs_write_recover > 0)
-+ recover = ns2cyc(timing->ncs_write_recover);
-+ else
-+ recover = 1;
++struct gpio_attribute {
++ struct configfs_attribute attr;
++ ssize_t (*show)(struct gpio_item *, char *);
++ ssize_t (*store)(struct gpio_item *, const char *, size_t);
++};
+
-+ cycle = config->ncs_write_setup + config->ncs_write_pulse + recover;
++static irqreturn_t gpio_dev_interrupt(int irq, void *dev_id)
++{
++ struct gpio_item *gpio = dev_id;
++ u32 old_state, new_state;
+
-+ if (config->write_cycle < cycle)
-+ config->write_cycle = cycle;
++ old_state = gpio->pin_state;
++ new_state = at32_gpio_get_value_multiple(gpio->port, gpio->pin_mask);
++ gpio->pin_state = new_state;
+
-+ /* Extend write cycle in needed */
-+ if (timing->nwe_recover > 0)
-+ recover = ns2cyc(timing->nwe_recover);
-+ else
-+ recover = 1;
++ if (new_state != old_state) {
++ gpio->changed = 1;
++ wake_up_interruptible(&gpio->change_wq);
+
-+ cycle = config->nwe_setup + config->nwe_pulse + recover;
++ if (gpio->async_queue)
++ kill_fasync(&gpio->async_queue, SIGIO, POLL_IN);
++ }
+
-+ if (config->write_cycle < cycle)
-+ config->write_cycle = cycle;
++ return IRQ_HANDLED;
+}
-+EXPORT_SYMBOL(smc_set_timing);
+
-+int smc_set_configuration(int cs, const struct smc_config *config)
++static int gpio_dev_open(struct inode *inode, struct file *file)
+{
-+ unsigned long offset;
-+ u32 setup, pulse, cycle, mode;
++ struct gpio_item *gpio = container_of(inode->i_cdev,
++ struct gpio_item,
++ char_dev);
++ unsigned int irq;
++ unsigned int i;
++ int ret;
+
-+ if (!hsmc)
-+ return -ENODEV;
-+ if (cs >= NR_CHIP_SELECTS)
-+ return -EINVAL;
++ nonseekable_open(inode, file);
++ config_item_get(&gpio->item);
++ file->private_data = gpio;
+
-+ setup = (HSMC_BF(NWE_SETUP, config->nwe_setup)
-+ | HSMC_BF(NCS_WR_SETUP, config->ncs_write_setup)
-+ | HSMC_BF(NRD_SETUP, config->nrd_setup)
-+ | HSMC_BF(NCS_RD_SETUP, config->ncs_read_setup));
-+ pulse = (HSMC_BF(NWE_PULSE, config->nwe_pulse)
-+ | HSMC_BF(NCS_WR_PULSE, config->ncs_write_pulse)
-+ | HSMC_BF(NRD_PULSE, config->nrd_pulse)
-+ | HSMC_BF(NCS_RD_PULSE, config->ncs_read_pulse));
-+ cycle = (HSMC_BF(NWE_CYCLE, config->write_cycle)
-+ | HSMC_BF(NRD_CYCLE, config->read_cycle));
-
- switch (config->bus_width) {
- case 1:
-diff --git a/arch/avr32/mach-at32ap/pio.c b/arch/avr32/mach-at32ap/pio.c
-index 1eb99b8..c978c36 100644
---- a/arch/avr32/mach-at32ap/pio.c
-+++ b/arch/avr32/mach-at32ap/pio.c
-@@ -110,6 +110,10 @@ void __init at32_select_gpio(unsigned int pin, unsigned long flags)
- pio_writel(pio, SODR, mask);
- else
- pio_writel(pio, CODR, mask);
-+ if (flags & AT32_GPIOF_MULTIDRV)
-+ pio_writel(pio, MDER, mask);
-+ else
-+ pio_writel(pio, MDDR, mask);
- pio_writel(pio, PUDR, mask);
- pio_writel(pio, OER, mask);
- } else {
-@@ -158,6 +162,82 @@ fail:
- dump_stack();
- }
-
-+#ifdef CONFIG_GPIO_DEV
++ gpio->pin_state = at32_gpio_get_value_multiple(gpio->port,
++ gpio->pin_mask);
++ gpio->changed = 1;
+
-+/* Gang allocators and accessors; used by the GPIO /dev driver */
-+int at32_gpio_port_is_valid(unsigned int port)
-+{
-+ return port < MAX_NR_PIO_DEVICES && pio_dev[port].regs != NULL;
-+}
++ for (i = 0; i < 32; i++) {
++ if (gpio->pin_mask & (1 << i)) {
++ irq = gpio_to_irq(32 * gpio->port + i);
++ ret = request_irq(irq, gpio_dev_interrupt, 0,
++ "gpio-dev", gpio);
++ if (ret)
++ goto err_irq;
++ }
++ }
+
-+int at32_select_gpio_pins(unsigned int port, u32 pins, u32 oe_mask)
-+{
-+ struct pio_device *pio;
-+ u32 old, new;
++ return 0;
+
-+ pio = &pio_dev[port];
-+ BUG_ON(port > ARRAY_SIZE(pio_dev) || !pio->regs || (oe_mask & ~pins));
++err_irq:
++ while (i--) {
++ if (gpio->pin_mask & (1 << i)) {
++ irq = gpio_to_irq(32 * gpio->port + i);
++ free_irq(irq, gpio);
++ }
++ }
+
-+ /* Try to allocate the pins */
-+ do {
-+ old = pio->pinmux_mask;
-+ if (old & pins)
-+ return -EBUSY;
++ config_item_put(&gpio->item);
+
-+ new = old | pins;
-+ } while (cmpxchg(&pio->pinmux_mask, old, new) != old);
++ return ret;
++}
+
-+ /* That went well, now configure the port */
-+ pio_writel(pio, OER, oe_mask);
-+ pio_writel(pio, PER, pins);
++static int gpio_dev_fasync(int fd, struct file *file, int mode)
++{
++ struct gpio_item *gpio = file->private_data;
+
-+ return 0;
++ return fasync_helper(fd, file, mode, &gpio->async_queue);
+}
+
-+void at32_deselect_pins(unsigned int port, u32 pins)
++static int gpio_dev_release(struct inode *inode, struct file *file)
+{
-+ struct pio_device *pio;
-+ u32 old, new;
++ struct gpio_item *gpio = file->private_data;
++ unsigned int irq;
++ unsigned int i;
+
-+ pio = &pio_dev[port];
-+ BUG_ON(port > ARRAY_SIZE(pio_dev) || !pio->regs);
++ gpio_dev_fasync(-1, file, 0);
+
-+ /* Return to a "safe" mux configuration */
-+ pio_writel(pio, PUER, pins);
-+ pio_writel(pio, ODR, pins);
++ for (i = 0; i < 32; i++) {
++ if (gpio->pin_mask & (1 << i)) {
++ irq = gpio_to_irq(32 * gpio->port + i);
++ free_irq(irq, gpio);
++ }
++ }
+
-+ /* Deallocate the pins */
-+ do {
-+ old = pio->pinmux_mask;
-+ new = old & ~pins;
-+ } while (cmpxchg(&pio->pinmux_mask, old, new) != old);
++ config_item_put(&gpio->item);
++
++ return 0;
+}
+
-+u32 at32_gpio_get_value_multiple(unsigned int port, u32 pins)
++static unsigned int gpio_dev_poll(struct file *file, poll_table *wait)
+{
-+ struct pio_device *pio;
++ struct gpio_item *gpio = file->private_data;
++ unsigned int mask = 0;
+
-+ pio = &pio_dev[port];
-+ BUG_ON(port > ARRAY_SIZE(pio_dev) || !pio->regs);
++ poll_wait(file, &gpio->change_wq, wait);
++ if (gpio->changed)
++ mask |= POLLIN | POLLRDNORM;
+
-+ return pio_readl(pio, PDSR) & pins;
++ return mask;
+}
+
-+void at32_gpio_set_value_multiple(unsigned int port, u32 value, u32 mask)
++static ssize_t gpio_dev_read(struct file *file, char __user *buf,
++ size_t count, loff_t *offset)
+{
-+ struct pio_device *pio;
++ struct gpio_item *gpio = file->private_data;
++ u32 value;
+
-+ pio = &pio_dev[port];
-+ BUG_ON(port > ARRAY_SIZE(pio_dev) || !pio->regs);
++ spin_lock_irq(&gpio->lock);
++ while (!gpio->changed) {
++ spin_unlock_irq(&gpio->lock);
+
-+ /* No atomic updates for now... */
-+ pio_writel(pio, CODR, ~value & mask);
-+ pio_writel(pio, SODR, value & mask);
-+}
++ if (file->f_flags & O_NONBLOCK)
++ return -EAGAIN;
+
-+#endif /* CONFIG_GPIO_DEV */
++ if (wait_event_interruptible(gpio->change_wq, gpio->changed))
++ return -ERESTARTSYS;
+
++ spin_lock_irq(&gpio->lock);
++ }
+
- /*--------------------------------------------------------------------------*/
-
- /* GPIO API */
-diff --git a/arch/avr32/mach-at32ap/pm.h b/arch/avr32/mach-at32ap/pm.h
-index a1f8ace..47efd0d 100644
---- a/arch/avr32/mach-at32ap/pm.h
-+++ b/arch/avr32/mach-at32ap/pm.h
-@@ -4,6 +4,14 @@
- #ifndef __ARCH_AVR32_MACH_AT32AP_PM_H__
- #define __ARCH_AVR32_MACH_AT32AP_PM_H__
-
-+/*
-+ * We can reduce the code size a bit by using a constant here. Since
-+ * this file is only used on AVR32 AP CPUs with segmentation enabled,
-+ * it's safe to not use ioremap. Generic drivers should of course
-+ * never do this.
-+ */
-+#define AT32_PM_BASE 0xfff00000
-+
- /* PM register offsets */
- #define PM_MCCTRL 0x0000
- #define PM_CKSEL 0x0004
-diff --git a/arch/avr32/mm/dma-coherent.c b/arch/avr32/mm/dma-coherent.c
-index 099212d..26f29c6 100644
---- a/arch/avr32/mm/dma-coherent.c
-+++ b/arch/avr32/mm/dma-coherent.c
-@@ -41,6 +41,13 @@ static struct page *__dma_alloc(struct device *dev, size_t size,
- struct page *page, *free, *end;
- int order;
-
-+ /* Following is a work-around (a.k.a. hack) to prevent pages
-+ * with __GFP_COMP being passed to split_page() which cannot
-+ * handle them. The real problem is that this flag probably
-+ * should be 0 on AVR32 as it is not supported on this
-+ * platform--see CONFIG_HUGETLB_PAGE. */
-+ gfp &= ~(__GFP_COMP);
-+
- size = PAGE_ALIGN(size);
- order = get_order(size);
-
-diff --git a/arch/avr32/mm/init.c b/arch/avr32/mm/init.c
-index 82cf708..480760b 100644
---- a/arch/avr32/mm/init.c
-+++ b/arch/avr32/mm/init.c
-@@ -224,19 +224,9 @@ void free_initmem(void)
-
- #ifdef CONFIG_BLK_DEV_INITRD
-
--static int keep_initrd;
--
- void free_initrd_mem(unsigned long start, unsigned long end)
- {
-- if (!keep_initrd)
-- free_area(start, end, "initrd");
--}
--
--static int __init keepinitrd_setup(char *__unused)
--{
-- keep_initrd = 1;
-- return 1;
-+ free_area(start, end, "initrd");
- }
-
--__setup("keepinitrd", keepinitrd_setup);
- #endif
-diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
-index 9f3a4cd..6f5bcd6 100644
---- a/drivers/i2c/busses/Kconfig
-+++ b/drivers/i2c/busses/Kconfig
-@@ -80,6 +80,14 @@ config I2C_AT91
- This supports the use of the I2C interface on Atmel AT91
- processors.
-
-+config I2C_ATMELTWI
-+ tristate "Atmel Two-Wire Interface (TWI)"
-+ depends on I2C && (ARCH_AT91 || PLATFORM_AT32AP)
-+ help
-+ Atmel on-chip TWI controller. Say Y if you have an AT32 or
-+ AT91-based device and want to use its built-in TWI
-+ functionality.
++ gpio->changed = 0;
++ value = at32_gpio_get_value_multiple(gpio->port, gpio->pin_mask);
+
- config I2C_AU1550
- tristate "Au1550/Au1200 SMBus interface"
- depends on SOC_AU1550 || SOC_AU1200
-diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
-index 5b752e4..e4644a8 100644
---- a/drivers/i2c/busses/Makefile
-+++ b/drivers/i2c/busses/Makefile
-@@ -52,6 +52,7 @@ obj-$(CONFIG_I2C_VIAPRO) += i2c-viapro.o
- obj-$(CONFIG_I2C_VOODOO3) += i2c-voodoo3.o
- obj-$(CONFIG_SCx200_ACB) += scx200_acb.o
- obj-$(CONFIG_SCx200_I2C) += scx200_i2c.o
-+obj-$(CONFIG_I2C_ATMELTWI) += i2c-atmeltwi.o
-
- ifeq ($(CONFIG_I2C_DEBUG_BUS),y)
- EXTRA_CFLAGS += -DDEBUG
-diff --git a/drivers/i2c/busses/i2c-atmeltwi.c b/drivers/i2c/busses/i2c-atmeltwi.c
-new file mode 100644
-index 0000000..3f78b31
---- /dev/null
-+++ b/drivers/i2c/busses/i2c-atmeltwi.c
-@@ -0,0 +1,436 @@
-+/*
-+ * i2c Support for Atmel's Two-Wire Interface (TWI)
-+ *
-+ * Based on the work of Copyright (C) 2004 Rick Bronson
-+ * Converted to 2.6 by Andrew Victor <andrew at sanpeople.com>
-+ * Ported to AVR32 and heavily modified by Espen Krangnes
-+ * <ekrangnes at atmel.com>
-+ *
-+ * Copyright (C) 2006 Atmel Corporation
-+ *
-+ * Borrowed heavily from the original work by:
-+ * Copyright (C) 2000 Philip Edelbrock <phil at stimpy.netroedge.com>
-+ *
-+ * Partialy rewriten by Karel Hojdar <cmkaho at seznam.cz>
-+ * bugs removed, interrupt routine markedly rewritten
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+#undef VERBOSE_DEBUG
++ spin_unlock_irq(&gpio->lock);
+
-+#include <linux/module.h>
-+#include <linux/slab.h>
-+#include <linux/i2c.h>
-+#include <linux/init.h>
-+#include <linux/clk.h>
-+#include <linux/err.h>
-+#include <linux/interrupt.h>
-+#include <linux/platform_device.h>
-+#include <linux/completion.h>
-+#include <linux/io.h>
++ count = min(count, (size_t)4);
++ if (copy_to_user(buf, &value, count))
++ return -EFAULT;
+
-+#include "i2c-atmeltwi.h"
++ return count;
++}
+
-+static unsigned int baudrate = 100 * 1000;
-+module_param(baudrate, uint, S_IRUGO);
-+MODULE_PARM_DESC(baudrate, "The TWI baudrate");
++static ssize_t gpio_dev_write(struct file *file, const char __user *buf,
++ size_t count, loff_t *offset)
++{
++ struct gpio_item *gpio = file->private_data;
++ u32 value = 0;
++ u32 mask = ~0UL;
+
++ count = min(count, (size_t)4);
++ if (copy_from_user(&value, buf, count))
++ return -EFAULT;
+
-+struct atmel_twi {
-+ void __iomem *regs;
-+ struct i2c_adapter adapter;
-+ struct clk *pclk;
-+ struct completion comp;
-+ u32 mask;
-+ u8 *buf;
-+ u16 len;
-+ u16 acks_left;
-+ int status;
-+ unsigned int irq;
++ /* Assuming big endian */
++ mask <<= (4 - count) * 8;
++ mask &= gpio->pin_mask;
++
++ at32_gpio_set_value_multiple(gpio->port, value, mask);
++
++ return count;
++}
+
++static struct file_operations gpio_dev_fops = {
++ .owner = THIS_MODULE,
++ .llseek = no_llseek,
++ .open = gpio_dev_open,
++ .release = gpio_dev_release,
++ .fasync = gpio_dev_fasync,
++ .poll = gpio_dev_poll,
++ .read = gpio_dev_read,
++ .write = gpio_dev_write,
+};
-+#define to_atmel_twi(adap) container_of(adap, struct atmel_twi, adapter)
+
-+/*
-+ * (Re)Initialize the TWI hardware registers.
-+ */
-+static int twi_hwinit(struct atmel_twi *twi)
++static struct gpio_item *to_gpio_item(struct config_item *item)
+{
-+ unsigned long cdiv, ckdiv = 0;
++ return item ? container_of(item, struct gpio_item, item) : NULL;
++}
+
-+ /* REVISIT: wait till SCL is high before resetting; otherwise,
-+ * some versions will wedge forever.
-+ */
++static ssize_t gpio_show_gpio_id(struct gpio_item *gpio, char *page)
++{
++ return sprintf(page, "%d\n", gpio->port);
++}
+
-+ twi_writel(twi, IDR, ~0UL);
-+ twi_writel(twi, CR, TWI_BIT(SWRST)); /*Reset peripheral*/
-+ twi_readl(twi, SR);
++static ssize_t gpio_store_gpio_id(struct gpio_item *gpio,
++ const char *page, size_t count)
++{
++ unsigned long id;
++ char *p = (char *)page;
++ ssize_t ret = -EINVAL;
+
-+ cdiv = (clk_get_rate(twi->pclk) / (2 * baudrate)) - 4;
++ id = simple_strtoul(p, &p, 0);
++ if (!p || (*p && (*p != '\n')))
++ return -EINVAL;
+
-+ while (cdiv > 255) {
-+ ckdiv++;
-+ cdiv = cdiv >> 1;
++ /* Switching PIO is not allowed when live... */
++ spin_lock(&gpio->lock);
++ if (!gpio->enabled) {
++ ret = -ENXIO;
++ if (at32_gpio_port_is_valid(id)) {
++ gpio->port = id;
++ ret = count;
++ }
+ }
++ spin_unlock(&gpio->lock);
+
-+ /* REVISIT: there are various errata to consider re CDIV and CHDIV
-+ * here, at least on at91 parts.
-+ */
++ return ret;
++}
+
-+ if (ckdiv > 7)
-+ return -EINVAL;
-+ else
-+ twi_writel(twi, CWGR, TWI_BF(CKDIV, ckdiv)
-+ | TWI_BF(CHDIV, cdiv)
-+ | TWI_BF(CLDIV, cdiv));
-+ return 0;
++static ssize_t gpio_show_pin_mask(struct gpio_item *gpio, char *page)
++{
++ return sprintf(page, "0x%08x\n", gpio->pin_mask);
+}
+
-+/*
-+ * Waits for the i2c status register to set the specified bitmask
-+ * Returns 0 if timed out ... ~100ms is much longer than the SMBus
-+ * limit, but I2C has no limit at all.
-+ */
-+static int twi_complete(struct atmel_twi *twi, u32 mask)
++static ssize_t gpio_store_pin_mask(struct gpio_item *gpio,
++ const char *page, size_t count)
+{
-+ int timeout = msecs_to_jiffies(100);
++ u32 new_mask;
++ char *p = (char *)page;
++ ssize_t ret = -EINVAL;
+
-+ mask |= TWI_BIT(TXCOMP);
-+ twi->mask = mask | TWI_BIT(NACK) | TWI_BIT(OVRE);
-+ init_completion(&twi->comp);
-+
-+ twi_writel(twi, IER, mask);
-+
-+ if (!wait_for_completion_timeout(&twi->comp, timeout)) {
-+ /* RESET TWI interface */
-+ twi_writel(twi, CR, TWI_BIT(SWRST));
-+
-+ /* Reinitialize TWI */
-+ twi_hwinit(twi);
++ new_mask = simple_strtoul(p, &p, 0);
++ if (!p || (*p && (*p != '\n')))
++ return -EINVAL;
+
-+ return -ETIMEDOUT;
++ /* Can't update the pin mask while live. */
++ spin_lock(&gpio->lock);
++ if (!gpio->enabled) {
++ gpio->oe_mask &= new_mask;
++ gpio->pin_mask = new_mask;
++ ret = count;
+ }
-+ return 0;
++ spin_unlock(&gpio->lock);
++
++ return ret;
+}
+
-+/*
-+ * Generic i2c master transfer entrypoint.
-+ */
-+static int twi_xfer(struct i2c_adapter *adap, struct i2c_msg *pmsg, int num)
++static ssize_t gpio_show_oe_mask(struct gpio_item *gpio, char *page)
+{
-+ struct atmel_twi *twi = to_atmel_twi(adap);
-+ int i;
-+
-+ dev_dbg(&adap->dev, "twi_xfer: processing %d messages:\n", num);
-+
-+ twi->status = 0;
-+ for (i = 0; i < num; i++, pmsg++) {
-+ twi->len = pmsg->len;
-+ twi->buf = pmsg->buf;
-+ twi->acks_left = pmsg->len;
-+ twi_writel(twi, MMR, TWI_BF(DADR, pmsg->addr) |
-+ (pmsg->flags & I2C_M_RD ? TWI_BIT(MREAD) : 0));
-+ twi_writel(twi, IADR, TWI_BF(IADR, pmsg->addr));
-+
-+ dev_dbg(&adap->dev,
-+ "#%d: %s %d byte%s %s dev 0x%02x\n",
-+ i,
-+ pmsg->flags & I2C_M_RD ? "reading" : "writing",
-+ pmsg->len,
-+ pmsg->len > 1 ? "s" : "",
-+ pmsg->flags & I2C_M_RD ? "from" : "to", pmsg->addr);
-+
-+ /* enable */
-+ twi_writel(twi, CR, TWI_BIT(MSEN));
-+
-+ if (pmsg->flags & I2C_M_RD) {
-+ /* cleanup after previous RX overruns */
-+ while (twi_readl(twi, SR) & TWI_BIT(RXRDY))
-+ twi_readl(twi, RHR);
-+
-+ if (twi->len == 1)
-+ twi_writel(twi, CR,
-+ TWI_BIT(START) | TWI_BIT(STOP));
-+ else
-+ twi_writel(twi, CR, TWI_BIT(START));
-+
-+ if (twi_complete(twi, TWI_BIT(RXRDY)) == -ETIMEDOUT) {
-+ dev_dbg(&adap->dev, "RX[%d] timeout. "
-+ "Stopped with %d bytes left\n",
-+ i, twi->acks_left);
-+ return -ETIMEDOUT;
-+ }
-+ } else {
-+ twi_writel(twi, THR, twi->buf[0]);
-+ twi->acks_left--;
-+ /* REVISIT: some chips don't start automagically:
-+ * twi_writel(twi, CR, TWI_BIT(START));
-+ */
-+ if (twi_complete(twi, TWI_BIT(TXRDY)) == -ETIMEDOUT) {
-+ dev_dbg(&adap->dev, "TX[%d] timeout. "
-+ "Stopped with %d bytes left\n",
-+ i, twi->acks_left);
-+ return -ETIMEDOUT;
-+ }
-+ /* REVISIT: an erratum workaround may be needed here;
-+ * see sam9261 "STOP not generated" (START either).
-+ */
-+ }
-+
-+ /* Disable TWI interface */
-+ twi_writel(twi, CR, TWI_BIT(MSDIS));
++ return sprintf(page, "0x%08x\n", gpio->oe_mask);
++}
+
-+ if (twi->status)
-+ return twi->status;
++static ssize_t gpio_store_oe_mask(struct gpio_item *gpio,
++ const char *page, size_t count)
++{
++ u32 mask;
++ char *p = (char *)page;
++ ssize_t ret = -EINVAL;
+
-+ /* WARNING: This driver lies about properly supporting
-+ * repeated start, or it would *ALWAYS* return here. It
-+ * has issued a STOP. Continuing is a false claim -- that
-+ * a second (or third, etc.) message is part of the same
-+ * "combined" (no STOPs between parts) message.
-+ */
++ mask = simple_strtoul(p, &p, 0);
++ if (!p || (*p && (*p != '\n')))
++ return -EINVAL;
+
-+ } /* end cur msg */
++ spin_lock(&gpio->lock);
++ if (!gpio->enabled) {
++ gpio->oe_mask = mask & gpio->pin_mask;
++ ret = count;
++ }
++ spin_unlock(&gpio->lock);
+
-+ return i;
++ return ret;
+}
+
-+
-+static irqreturn_t twi_interrupt(int irq, void *dev_id)
++static ssize_t gpio_show_enabled(struct gpio_item *gpio, char *page)
+{
-+ struct atmel_twi *twi = dev_id;
-+ int status = twi_readl(twi, SR);
-+
-+ /* Save state for later debug prints */
-+ int old_status = status;
++ return sprintf(page, "%d\n", gpio->enabled);
++}
+
-+ if (twi->mask & status) {
++static ssize_t gpio_store_enabled(struct gpio_item *gpio,
++ const char *page, size_t count)
++{
++ char *p = (char *)page;
++ int enabled;
++ int ret;
+
-+ status &= twi->mask;
++ enabled = simple_strtoul(p, &p, 0);
++ if (!p || (*p && (*p != '\n')))
++ return -EINVAL;
+
-+ if (status & TWI_BIT(RXRDY)) {
-+ if ((status & TWI_BIT(OVRE)) && twi->acks_left) {
-+ /* Note weakness in fault reporting model:
-+ * we can't say "the first N of these data
-+ * bytes are valid".
-+ */
-+ dev_err(&twi->adapter.dev,
-+ "OVERRUN RX! %04x, lost %d\n",
-+ old_status, twi->acks_left);
-+ twi->acks_left = 0;
-+ twi_writel(twi, CR, TWI_BIT(STOP));
-+ twi->status = -EOVERFLOW;
-+ } else if (twi->acks_left > 0) {
-+ twi->buf[twi->len - twi->acks_left] =
-+ twi_readl(twi, RHR);
-+ twi->acks_left--;
-+ }
-+ if (status & TWI_BIT(TXCOMP))
-+ goto done;
-+ if (twi->acks_left == 1)
-+ twi_writel(twi, CR, TWI_BIT(STOP));
++ /* make it a boolean value */
++ enabled = !!enabled;
+
-+ } else if (status & (TWI_BIT(NACK) | TWI_BIT(TXCOMP))) {
-+ goto done;
++ if (gpio->enabled == enabled)
++ /* No change; do nothing. */
++ return count;
+
-+ } else if (status & TWI_BIT(TXRDY)) {
-+ if (twi->acks_left > 0) {
-+ twi->acks_left--;
-+ twi_writel(twi, THR,
-+ twi->buf[twi->len - twi->acks_left]);
-+ } else
-+ twi_writel(twi, CR, TWI_BIT(STOP));
-+ }
++ BUG_ON(gpio->id >= GPIO_DEV_MAX);
+
-+ if (twi->acks_left == 0)
-+ twi_writel(twi, IDR, ~TWI_BIT(TXCOMP));
++ if (!enabled) {
++ class_device_unregister(gpio->gpio_dev);
++ cdev_del(&gpio->char_dev);
++ at32_deselect_pins(gpio->port, gpio->pin_mask);
++ gpio->initialized = 0;
++ } else {
++ if (gpio->port < 0 || !gpio->pin_mask)
++ return -ENODEV;
+ }
+
-+ /* enabling this message helps trigger overruns/underruns ... */
-+ dev_vdbg(&twi->adapter.dev,
-+ "ISR: SR 0x%04X, mask 0x%04X, acks %i\n",
-+ old_status,
-+ twi->acks_left ? twi->mask : TWI_BIT(TXCOMP),
-+ twi->acks_left);
++ /* Disallow any updates to gpio_id or pin_mask */
++ spin_lock(&gpio->lock);
++ gpio->enabled = enabled;
++ spin_unlock(&gpio->lock);
+
-+ return IRQ_HANDLED;
++ if (!enabled)
++ return count;
+
-+done:
-+ /* Note weak fault reporting model: we can't report how many
-+ * bytes we sent before the NAK, or let upper layers choose
-+ * whether to continue. The I2C stack doesn't allow that...
-+ */
-+ if (status & TWI_BIT(NACK)) {
-+ dev_dbg(&twi->adapter.dev, "NACK received! %d to go\n",
-+ twi->acks_left);
-+ twi->status = -EPIPE;
++ /* Now, try to allocate the pins */
++ ret = at32_select_gpio_pins(gpio->port, gpio->pin_mask, gpio->oe_mask);
++ if (ret)
++ goto err_alloc_pins;
+
-+ /* TX underrun morphs automagically into a premature STOP;
-+ * we'll probably observe UVRE even when it's not documented.
-+ */
-+ } else if (twi->acks_left && (twi->mask & TWI_BIT(TXRDY))) {
-+ dev_err(&twi->adapter.dev, "UNDERRUN TX! %04x, %d to go\n",
-+ old_status, twi->acks_left);
-+ twi->status = -ENOSR;
++ gpio->initialized = 1;
++
++ cdev_init(&gpio->char_dev, &gpio_dev_fops);
++ gpio->char_dev.owner = THIS_MODULE;
++ ret = cdev_add(&gpio->char_dev, MKDEV(MAJOR(gpio_devt), gpio->id), 1);
++ if (ret < 0)
++ goto err_cdev_add;
++ gpio->gpio_dev = class_device_create(gpio_dev_class, NULL,
++ MKDEV(MAJOR(gpio_devt), gpio->id),
++ NULL,
++ "gpio%d", gpio->id);
++ if (IS_ERR(gpio->gpio_dev)) {
++ printk(KERN_ERR "failed to create gpio%d\n", gpio->id);
++ ret = PTR_ERR(gpio->gpio_dev);
++ goto err_class_dev;
+ }
+
-+ twi_writel(twi, IDR, ~0UL);
-+ complete(&twi->comp);
++ printk(KERN_INFO "created gpio%d (port%d/0x%08x) as (%d:%d)\n",
++ gpio->id, gpio->port, gpio->pin_mask,
++ MAJOR(gpio->gpio_dev->devt), MINOR(gpio->gpio_dev->devt));
+
-+ dev_dbg(&twi->adapter.dev, "ISR: SR 0x%04X, acks %i --> %d\n",
-+ old_status, twi->acks_left, twi->status);
++ return 0;
+
-+ return IRQ_HANDLED;
-+}
++err_class_dev:
++ cdev_del(&gpio->char_dev);
++err_cdev_add:
++ at32_deselect_pins(gpio->port, gpio->pin_mask);
++ gpio->initialized = 0;
++err_alloc_pins:
++ spin_lock(&gpio->lock);
++ gpio->enabled = 0;
++ spin_unlock(&gpio->lock);
+
++ return ret;
++}
+
-+/*
-+ * Return list of supported functionality.
-+ *
-+ * NOTE: see warning above about repeated starts; this driver is falsely
-+ * claiming to support "combined" transfers. The mid-message STOPs mean
-+ * some slaves will never work with this driver. (Use i2c-gpio...)
-+ */
-+static u32 twi_func(struct i2c_adapter *adapter)
-+{
-+ return (I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL)
-+ & ~I2C_FUNC_SMBUS_QUICK;
-+}
++static struct gpio_attribute gpio_item_attr_gpio_id = {
++ .attr = {
++ .ca_owner = THIS_MODULE,
++ .ca_name = "gpio_id",
++ .ca_mode = S_IRUGO | S_IWUSR,
++ },
++ .show = gpio_show_gpio_id,
++ .store = gpio_store_gpio_id,
++};
++static struct gpio_attribute gpio_item_attr_pin_mask = {
++ .attr = {
++ .ca_owner = THIS_MODULE,
++ .ca_name = "pin_mask",
++ .ca_mode = S_IRUGO | S_IWUSR,
++ },
++ .show = gpio_show_pin_mask,
++ .store = gpio_store_pin_mask,
++};
++static struct gpio_attribute gpio_item_attr_oe_mask = {
++ .attr = {
++ .ca_owner = THIS_MODULE,
++ .ca_name = "oe_mask",
++ .ca_mode = S_IRUGO | S_IWUSR,
++ },
++ .show = gpio_show_oe_mask,
++ .store = gpio_store_oe_mask,
++};
++static struct gpio_attribute gpio_item_attr_enabled = {
++ .attr = {
++ .ca_owner = THIS_MODULE,
++ .ca_name = "enabled",
++ .ca_mode = S_IRUGO | S_IWUSR,
++ },
++ .show = gpio_show_enabled,
++ .store = gpio_store_enabled,
++};
+
-+static struct i2c_algorithm twi_algorithm = {
-+ .master_xfer = twi_xfer,
-+ .functionality = twi_func,
++static struct configfs_attribute *gpio_item_attrs[] = {
++ &gpio_item_attr_gpio_id.attr,
++ &gpio_item_attr_pin_mask.attr,
++ &gpio_item_attr_oe_mask.attr,
++ &gpio_item_attr_enabled.attr,
++ NULL,
+};
+
-+/*
-+ * Main initialization routine.
-+ */
-+static int __init twi_probe(struct platform_device *pdev)
++static ssize_t gpio_show_attr(struct config_item *item,
++ struct configfs_attribute *attr,
++ char *page)
+{
-+ struct atmel_twi *twi;
-+ struct resource *regs;
-+ struct clk *pclk;
-+ struct i2c_adapter *adapter;
-+ int rc, irq;
-+
-+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!regs)
-+ return -ENXIO;
-+
-+ pclk = clk_get(&pdev->dev, "pclk");
-+ if (IS_ERR(pclk))
-+ return PTR_ERR(pclk);
-+ clk_enable(pclk);
-+
-+ rc = -ENOMEM;
-+ twi = kzalloc(sizeof(struct atmel_twi), GFP_KERNEL);
-+ if (!twi) {
-+ dev_dbg(&pdev->dev, "can't allocate interface!\n");
-+ goto err_alloc_twi;
-+ }
-+
-+ twi->pclk = pclk;
-+ twi->regs = ioremap(regs->start, regs->end - regs->start + 1);
-+ if (!twi->regs)
-+ goto err_ioremap;
-+
-+ irq = platform_get_irq(pdev, 0);
-+ rc = request_irq(irq, twi_interrupt, 0, "twi", twi);
-+ if (rc) {
-+ dev_dbg(&pdev->dev, "can't bind irq!\n");
-+ goto err_irq;
-+ }
-+ twi->irq = irq;
-+
-+ rc = twi_hwinit(twi);
-+ if (rc) {
-+ dev_err(&pdev->dev, "Unable to set baudrate\n");
-+ goto err_hw_init;
-+ }
-+
-+ adapter = &twi->adapter;
-+ sprintf(adapter->name, "TWI");
-+ adapter->algo = &twi_algorithm;
-+ adapter->class = I2C_CLASS_ALL;
-+ adapter->nr = pdev->id;
-+ adapter->dev.parent = &pdev->dev;
++ struct gpio_item *gpio_item = to_gpio_item(item);
++ struct gpio_attribute *gpio_attr
++ = container_of(attr, struct gpio_attribute, attr);
++ ssize_t ret = 0;
+
-+ platform_set_drvdata(pdev, twi);
++ if (gpio_attr->show)
++ ret = gpio_attr->show(gpio_item, page);
++ return ret;
++}
+
-+ rc = i2c_add_numbered_adapter(adapter);
-+ if (rc) {
-+ dev_dbg(&pdev->dev, "Adapter %s registration failed\n",
-+ adapter->name);
-+ goto err_register;
-+ }
++static ssize_t gpio_store_attr(struct config_item *item,
++ struct configfs_attribute *attr,
++ const char *page, size_t count)
++{
++ struct gpio_item *gpio_item = to_gpio_item(item);
++ struct gpio_attribute *gpio_attr
++ = container_of(attr, struct gpio_attribute, attr);
++ ssize_t ret = -EINVAL;
+
-+ dev_info(&pdev->dev,
-+ "Atmel TWI/I2C adapter (baudrate %dk) at 0x%08lx.\n",
-+ baudrate/1000, (unsigned long)regs->start);
++ if (gpio_attr->store)
++ ret = gpio_attr->store(gpio_item, page, count);
++ return ret;
++}
+
-+ return 0;
++static void gpio_release(struct config_item *item)
++{
++ kfree(to_gpio_item(item));
++}
+
++static struct configfs_item_operations gpio_item_ops = {
++ .release = gpio_release,
++ .show_attribute = gpio_show_attr,
++ .store_attribute = gpio_store_attr,
++};
+
-+err_register:
-+ platform_set_drvdata(pdev, NULL);
++static struct config_item_type gpio_item_type = {
++ .ct_item_ops = &gpio_item_ops,
++ .ct_attrs = gpio_item_attrs,
++ .ct_owner = THIS_MODULE,
++};
+
-+err_hw_init:
-+ free_irq(irq, twi);
++static struct config_item *gpio_make_item(struct config_group *group,
++ const char *name)
++{
++ static int next_id;
++ struct gpio_item *gpio;
+
-+err_irq:
-+ iounmap(twi->regs);
++ if (next_id >= GPIO_DEV_MAX)
++ return NULL;
+
-+err_ioremap:
-+ kfree(twi);
++ gpio = kzalloc(sizeof(struct gpio_item), GFP_KERNEL);
++ if (!gpio)
++ return NULL;
+
-+err_alloc_twi:
-+ clk_disable(pclk);
-+ clk_put(pclk);
++ gpio->id = next_id++;
++ config_item_init_type_name(&gpio->item, name, &gpio_item_type);
++ spin_lock_init(&gpio->lock);
++ init_waitqueue_head(&gpio->change_wq);
+
-+ return rc;
++ return &gpio->item;
+}
+
-+static int __exit twi_remove(struct platform_device *pdev)
++static void gpio_drop_item(struct config_group *group,
++ struct config_item *item)
+{
-+ struct atmel_twi *twi = platform_get_drvdata(pdev);
-+ int res;
++ struct gpio_item *gpio = to_gpio_item(item);
+
-+ platform_set_drvdata(pdev, NULL);
-+ res = i2c_del_adapter(&twi->adapter);
-+ twi_writel(twi, CR, TWI_BIT(MSDIS));
-+ iounmap(twi->regs);
-+ clk_disable(twi->pclk);
-+ clk_put(twi->pclk);
-+ free_irq(twi->irq, twi);
-+ kfree(twi);
++ spin_lock(&gpio->lock);
++ if (gpio->enabled) {
++ class_device_unregister(gpio->gpio_dev);
++ cdev_del(&gpio->char_dev);
++ }
+
-+ return res;
++ if (gpio->initialized) {
++ at32_deselect_pins(gpio->port, gpio->pin_mask);
++ gpio->initialized = 0;
++ gpio->enabled = 0;
++ }
++ spin_unlock(&gpio->lock);
+}
+
-+static struct platform_driver twi_driver = {
-+ .remove = __exit_p(twi_remove),
-+ .driver = {
-+ .name = "atmel_twi",
-+ .owner = THIS_MODULE,
++static struct configfs_group_operations gpio_group_ops = {
++ .make_item = gpio_make_item,
++ .drop_item = gpio_drop_item,
++};
++
++static struct config_item_type gpio_group_type = {
++ .ct_group_ops = &gpio_group_ops,
++ .ct_owner = THIS_MODULE,
++};
++
++static struct configfs_subsystem gpio_subsys = {
++ .su_group = {
++ .cg_item = {
++ .ci_namebuf = "gpio",
++ .ci_type = &gpio_group_type,
++ },
+ },
+};
+
-+static int __init atmel_twi_init(void)
++static int __init gpio_dev_init(void)
+{
-+ return platform_driver_probe(&twi_driver, twi_probe);
-+}
++ int err;
+
-+static void __exit atmel_twi_exit(void)
-+{
-+ platform_driver_unregister(&twi_driver);
-+}
++ gpio_dev_class = class_create(THIS_MODULE, "gpio-dev");
++ if (IS_ERR(gpio_dev_class)) {
++ err = PTR_ERR(gpio_dev_class);
++ goto err_class_create;
++ }
+
-+module_init(atmel_twi_init);
-+module_exit(atmel_twi_exit);
++ err = alloc_chrdev_region(&gpio_devt, 0, GPIO_DEV_MAX, "gpio");
++ if (err < 0)
++ goto err_alloc_chrdev;
+
-+MODULE_AUTHOR("Espen Krangnes");
-+MODULE_DESCRIPTION("I2C driver for Atmel TWI");
-+MODULE_LICENSE("GPL");
-diff --git a/drivers/i2c/busses/i2c-atmeltwi.h b/drivers/i2c/busses/i2c-atmeltwi.h
-new file mode 100644
-index 0000000..1aca065
---- /dev/null
-+++ b/drivers/i2c/busses/i2c-atmeltwi.h
-@@ -0,0 +1,117 @@
-+/*
-+ * Register definitions for the Atmel Two-Wire Interface
-+ */
++ /* Configfs initialization */
++ config_group_init(&gpio_subsys.su_group);
++ mutex_init(&gpio_subsys.su_mutex);
++ err = configfs_register_subsystem(&gpio_subsys);
++ if (err)
++ goto err_register_subsys;
+
-+#ifndef __ATMELTWI_H__
-+#define __ATMELTWI_H__
++ return 0;
+
-+/* TWI register offsets */
-+#define TWI_CR 0x0000
-+#define TWI_MMR 0x0004
-+#define TWI_SMR 0x0008
-+#define TWI_IADR 0x000c
-+#define TWI_CWGR 0x0010
-+#define TWI_SR 0x0020
-+#define TWI_IER 0x0024
-+#define TWI_IDR 0x0028
-+#define TWI_IMR 0x002c
-+#define TWI_RHR 0x0030
-+#define TWI_THR 0x0034
++err_register_subsys:
++ unregister_chrdev_region(gpio_devt, GPIO_DEV_MAX);
++err_alloc_chrdev:
++ class_destroy(gpio_dev_class);
++err_class_create:
++ printk(KERN_WARNING "Failed to initialize gpio /dev interface\n");
++ return err;
++}
++late_initcall(gpio_dev_init);
+--- a/arch/avr32/mach-at32ap/hsmc.c
++++ b/arch/avr32/mach-at32ap/hsmc.c
+@@ -278,4 +278,4 @@ static int __init hsmc_init(void)
+ {
+ return platform_driver_register(&hsmc_driver);
+ }
+-arch_initcall(hsmc_init);
++core_initcall(hsmc_init);
+--- a/arch/avr32/mach-at32ap/intc.c
++++ b/arch/avr32/mach-at32ap/intc.c
+@@ -1,5 +1,5 @@
+ /*
+- * Copyright (C) 2006 Atmel Corporation
++ * Copyright (C) 2006, 2008 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+@@ -12,15 +12,20 @@
+ #include <linux/interrupt.h>
+ #include <linux/irq.h>
+ #include <linux/platform_device.h>
++#include <linux/sysdev.h>
+
+-#include <asm/intc.h>
+ #include <asm/io.h>
+
+ #include "intc.h"
+
+ struct intc {
+- void __iomem *regs;
+- struct irq_chip chip;
++ void __iomem *regs;
++ struct irq_chip chip;
++ struct sys_device sysdev;
++#ifdef CONFIG_PM
++ unsigned long suspend_ipr;
++ unsigned long saved_ipr[64];
++#endif
+ };
+
+ extern struct platform_device at32_intc0_device;
+@@ -137,6 +142,74 @@ fail:
+ panic("Interrupt controller initialization failed!\n");
+ }
+
++#ifdef CONFIG_PM
++void intc_set_suspend_handler(unsigned long offset)
++{
++ intc0.suspend_ipr = offset;
++}
+
-+/* Bitfields in CR */
-+#define TWI_START_OFFSET 0
-+#define TWI_START_SIZE 1
-+#define TWI_STOP_OFFSET 1
-+#define TWI_STOP_SIZE 1
-+#define TWI_MSEN_OFFSET 2
-+#define TWI_MSEN_SIZE 1
-+#define TWI_MSDIS_OFFSET 3
-+#define TWI_MSDIS_SIZE 1
-+#define TWI_SVEN_OFFSET 4
-+#define TWI_SVEN_SIZE 1
-+#define TWI_SVDIS_OFFSET 5
-+#define TWI_SVDIS_SIZE 1
-+#define TWI_SWRST_OFFSET 7
-+#define TWI_SWRST_SIZE 1
++static int intc_suspend(struct sys_device *sdev, pm_message_t state)
++{
++ struct intc *intc = container_of(sdev, struct intc, sysdev);
++ int i;
+
-+/* Bitfields in MMR */
-+#define TWI_IADRSZ_OFFSET 8
-+#define TWI_IADRSZ_SIZE 2
-+#define TWI_MREAD_OFFSET 12
-+#define TWI_MREAD_SIZE 1
-+#define TWI_DADR_OFFSET 16
-+#define TWI_DADR_SIZE 7
++ if (unlikely(!irqs_disabled())) {
++ pr_err("intc_suspend: called with interrupts enabled\n");
++ return -EINVAL;
++ }
+
-+/* Bitfields in SMR */
-+#define TWI_SADR_OFFSET 16
-+#define TWI_SADR_SIZE 7
++ if (unlikely(!intc->suspend_ipr)) {
++ pr_err("intc_suspend: suspend_ipr not initialized\n");
++ return -EINVAL;
++ }
+
-+/* Bitfields in IADR */
-+#define TWI_IADR_OFFSET 0
-+#define TWI_IADR_SIZE 24
++ for (i = 0; i < 64; i++) {
++ intc->saved_ipr[i] = intc_readl(intc, INTPR0 + 4 * i);
++ intc_writel(intc, INTPR0 + 4 * i, intc->suspend_ipr);
++ }
+
-+/* Bitfields in CWGR */
-+#define TWI_CLDIV_OFFSET 0
-+#define TWI_CLDIV_SIZE 8
-+#define TWI_CHDIV_OFFSET 8
-+#define TWI_CHDIV_SIZE 8
-+#define TWI_CKDIV_OFFSET 16
-+#define TWI_CKDIV_SIZE 3
++ return 0;
++}
+
-+/* Bitfields in SR */
-+#define TWI_TXCOMP_OFFSET 0
-+#define TWI_TXCOMP_SIZE 1
-+#define TWI_RXRDY_OFFSET 1
-+#define TWI_RXRDY_SIZE 1
-+#define TWI_TXRDY_OFFSET 2
-+#define TWI_TXRDY_SIZE 1
-+#define TWI_SVDIR_OFFSET 3
-+#define TWI_SVDIR_SIZE 1
-+#define TWI_SVACC_OFFSET 4
-+#define TWI_SVACC_SIZE 1
-+#define TWI_GCACC_OFFSET 5
-+#define TWI_GCACC_SIZE 1
-+#define TWI_OVRE_OFFSET 6
-+#define TWI_OVRE_SIZE 1
-+#define TWI_UNRE_OFFSET 7
-+#define TWI_UNRE_SIZE 1
-+#define TWI_NACK_OFFSET 8
-+#define TWI_NACK_SIZE 1
-+#define TWI_ARBLST_OFFSET 9
-+#define TWI_ARBLST_SIZE 1
++static int intc_resume(struct sys_device *sdev)
++{
++ struct intc *intc = container_of(sdev, struct intc, sysdev);
++ int i;
+
-+/* Bitfields in RHR */
-+#define TWI_RXDATA_OFFSET 0
-+#define TWI_RXDATA_SIZE 8
++ WARN_ON(!irqs_disabled());
+
-+/* Bitfields in THR */
-+#define TWI_TXDATA_OFFSET 0
-+#define TWI_TXDATA_SIZE 8
++ for (i = 0; i < 64; i++)
++ intc_writel(intc, INTPR0 + 4 * i, intc->saved_ipr[i]);
+
-+/* Constants for IADRSZ */
-+#define TWI_IADRSZ_NO_ADDR 0
-+#define TWI_IADRSZ_ONE_BYTE 1
-+#define TWI_IADRSZ_TWO_BYTES 2
-+#define TWI_IADRSZ_THREE_BYTES 3
++ return 0;
++}
++#else
++#define intc_suspend NULL
++#define intc_resume NULL
++#endif
+
-+/* Bit manipulation macros */
-+#define TWI_BIT(name) \
-+ (1 << TWI_##name##_OFFSET)
-+#define TWI_BF(name, value) \
-+ (((value) & ((1 << TWI_##name##_SIZE) - 1)) \
-+ << TWI_##name##_OFFSET)
-+#define TWI_BFEXT(name, value) \
-+ (((value) >> TWI_##name##_OFFSET) \
-+ & ((1 << TWI_##name##_SIZE) - 1))
-+#define TWI_BFINS(name, value, old) \
-+ (((old) & ~(((1 << TWI_##name##_SIZE) - 1) \
-+ << TWI_##name##_OFFSET)) \
-+ | TWI_BF(name, (value)))
++static struct sysdev_class intc_class = {
++ .name = "intc",
++ .suspend = intc_suspend,
++ .resume = intc_resume,
++};
+
-+/* Register access macros */
-+#define twi_readl(port, reg) \
-+ __raw_readl((port)->regs + TWI_##reg)
-+#define twi_writel(port, reg, value) \
-+ __raw_writel((value), (port)->regs + TWI_##reg)
++static int __init intc_init_sysdev(void)
++{
++ int ret;
+
-+#endif /* __ATMELTWI_H__ */
-diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
-index 73e248f..9e848cc 100644
---- a/drivers/misc/Kconfig
-+++ b/drivers/misc/Kconfig
-@@ -202,5 +202,14 @@ config THINKPAD_ACPI_BAY
-
- If you are not sure, say Y here.
-
-+config ATMEL_SSC
-+ tristate "Device driver for Atmel SSC peripheral"
-+ depends on AVR32 || ARCH_AT91
-+ ---help---
-+ This option enables device driver support for Atmel Syncronized
-+ Serial Communication peripheral (SSC).
++ ret = sysdev_class_register(&intc_class);
++ if (ret)
++ return ret;
+
-+ The SSC peripheral supports a wide variety of serial frame based
-+ communications, i.e. I2S, SPI, etc.
-
- endif # MISC_DEVICES
-diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
-index b5ce0e3..40d8ed1 100644
---- a/drivers/misc/Makefile
-+++ b/drivers/misc/Makefile
-@@ -15,3 +15,4 @@ obj-$(CONFIG_SGI_IOC4) += ioc4.o
- obj-$(CONFIG_SONY_LAPTOP) += sony-laptop.o
- obj-$(CONFIG_THINKPAD_ACPI) += thinkpad_acpi.o
- obj-$(CONFIG_EEPROM_93CX6) += eeprom_93cx6.o
-+obj-$(CONFIG_ATMEL_SSC) += atmel-ssc.o
-diff --git a/drivers/misc/atmel-ssc.c b/drivers/misc/atmel-ssc.c
-new file mode 100644
-index 0000000..058ccac
++ intc0.sysdev.id = 0;
++ intc0.sysdev.cls = &intc_class;
++ ret = sysdev_register(&intc0.sysdev);
++
++ return ret;
++}
++device_initcall(intc_init_sysdev);
++
+ unsigned long intc_get_pending(unsigned int group)
+ {
+ return intc_readl(&intc0, INTREQ0 + 4 * group);
--- /dev/null
-+++ b/drivers/misc/atmel-ssc.c
-@@ -0,0 +1,174 @@
++++ b/arch/avr32/mach-at32ap/pdc.c
+@@ -0,0 +1,48 @@
+/*
-+ * Atmel SSC driver
-+ *
-+ * Copyright (C) 2007 Atmel Corporation
++ * Copyright (C) 2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
-+#include <linux/platform_device.h>
-+#include <linux/list.h>
+#include <linux/clk.h>
+#include <linux/err.h>
-+#include <linux/io.h>
-+#include <linux/list.h>
-+#include <linux/spinlock.h>
-+#include <linux/atmel-ssc.h>
-+
-+/* Serialize access to ssc_list and user count */
-+static DEFINE_SPINLOCK(user_lock);
-+static LIST_HEAD(ssc_list);
++#include <linux/init.h>
++#include <linux/platform_device.h>
+
-+struct ssc_device *ssc_request(unsigned int ssc_num)
++static int __init pdc_probe(struct platform_device *pdev)
+{
-+ int ssc_valid = 0;
-+ struct ssc_device *ssc;
-+
-+ spin_lock(&user_lock);
-+ list_for_each_entry(ssc, &ssc_list, list) {
-+ if (ssc->pdev->id == ssc_num) {
-+ ssc_valid = 1;
-+ break;
-+ }
-+ }
++ struct clk *pclk, *hclk;
+
-+ if (!ssc_valid) {
-+ spin_unlock(&user_lock);
-+ dev_dbg(&ssc->pdev->dev, "could not find requested device\n");
-+ return ERR_PTR(-ENODEV);
++ pclk = clk_get(&pdev->dev, "pclk");
++ if (IS_ERR(pclk)) {
++ dev_err(&pdev->dev, "no pclk defined\n");
++ return PTR_ERR(pclk);
+ }
-+
-+ if (ssc->user) {
-+ spin_unlock(&user_lock);
-+ dev_dbg(&ssc->pdev->dev, "module busy\n");
-+ return ERR_PTR(-EBUSY);
++ hclk = clk_get(&pdev->dev, "hclk");
++ if (IS_ERR(hclk)) {
++ dev_err(&pdev->dev, "no hclk defined\n");
++ clk_put(pclk);
++ return PTR_ERR(hclk);
+ }
-+ ssc->user++;
-+ spin_unlock(&user_lock);
+
-+ clk_enable(ssc->clk);
++ clk_enable(pclk);
++ clk_enable(hclk);
+
-+ return ssc;
++ dev_info(&pdev->dev, "Atmel Peripheral DMA Controller enabled\n");
++ return 0;
+}
-+EXPORT_SYMBOL(ssc_request);
+
-+void ssc_free(struct ssc_device *ssc)
++static struct platform_driver pdc_driver = {
++ .probe = pdc_probe,
++ .driver = {
++ .name = "pdc",
++ },
++};
++
++static int __init pdc_init(void)
+{
-+ spin_lock(&user_lock);
-+ if (ssc->user) {
-+ ssc->user--;
-+ clk_disable(ssc->clk);
-+ } else {
-+ dev_dbg(&ssc->pdev->dev, "device already free\n");
-+ }
-+ spin_unlock(&user_lock);
++ return platform_driver_register(&pdc_driver);
+}
-+EXPORT_SYMBOL(ssc_free);
++arch_initcall(pdc_init);
+--- a/arch/avr32/mach-at32ap/pio.c
++++ b/arch/avr32/mach-at32ap/pio.c
+@@ -157,6 +157,82 @@ fail:
+ dump_stack();
+ }
+
++#ifdef CONFIG_GPIO_DEV
+
-+static int __init ssc_probe(struct platform_device *pdev)
++/* Gang allocators and accessors; used by the GPIO /dev driver */
++int at32_gpio_port_is_valid(unsigned int port)
+{
-+ int retval = 0;
-+ struct resource *regs;
-+ struct ssc_device *ssc;
-+
-+ ssc = kzalloc(sizeof(struct ssc_device), GFP_KERNEL);
-+ if (!ssc) {
-+ dev_dbg(&pdev->dev, "out of memory\n");
-+ retval = -ENOMEM;
-+ goto out;
-+ }
++ return port < MAX_NR_PIO_DEVICES && pio_dev[port].regs != NULL;
++}
+
-+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!regs) {
-+ dev_dbg(&pdev->dev, "no mmio resource defined\n");
-+ retval = -ENXIO;
-+ goto out_free;
-+ }
++int at32_select_gpio_pins(unsigned int port, u32 pins, u32 oe_mask)
++{
++ struct pio_device *pio;
++ u32 old, new;
+
-+ ssc->clk = clk_get(&pdev->dev, "pclk");
-+ if (IS_ERR(ssc->clk)) {
-+ dev_dbg(&pdev->dev, "no pclk clock defined\n");
-+ retval = -ENXIO;
-+ goto out_free;
-+ }
++ pio = &pio_dev[port];
++ BUG_ON(port > ARRAY_SIZE(pio_dev) || !pio->regs || (oe_mask & ~pins));
+
-+ ssc->pdev = pdev;
-+ ssc->regs = ioremap(regs->start, regs->end - regs->start + 1);
-+ if (!ssc->regs) {
-+ dev_dbg(&pdev->dev, "ioremap failed\n");
-+ retval = -EINVAL;
-+ goto out_clk;
-+ }
++ /* Try to allocate the pins */
++ do {
++ old = pio->pinmux_mask;
++ if (old & pins)
++ return -EBUSY;
+
-+ /* disable all interrupts */
-+ clk_enable(ssc->clk);
-+ ssc_writel(ssc->regs, IDR, ~0UL);
-+ ssc_readl(ssc->regs, SR);
-+ clk_disable(ssc->clk);
++ new = old | pins;
++ } while (cmpxchg(&pio->pinmux_mask, old, new) != old);
+
-+ ssc->irq = platform_get_irq(pdev, 0);
-+ if (!ssc->irq) {
-+ dev_dbg(&pdev->dev, "could not get irq\n");
-+ retval = -ENXIO;
-+ goto out_unmap;
-+ }
++ /* That went well, now configure the port */
++ pio_writel(pio, OER, oe_mask);
++ pio_writel(pio, PER, pins);
+
-+ spin_lock(&user_lock);
-+ list_add_tail(&ssc->list, &ssc_list);
-+ spin_unlock(&user_lock);
++ return 0;
++}
+
-+ platform_set_drvdata(pdev, ssc);
++void at32_deselect_pins(unsigned int port, u32 pins)
++{
++ struct pio_device *pio;
++ u32 old, new;
+
-+ dev_info(&pdev->dev, "Atmel SSC device at 0x%p (irq %d)\n",
-+ ssc->regs, ssc->irq);
++ pio = &pio_dev[port];
++ BUG_ON(port > ARRAY_SIZE(pio_dev) || !pio->regs);
+
-+ goto out;
++ /* Return to a "safe" mux configuration */
++ pio_writel(pio, PUER, pins);
++ pio_writel(pio, ODR, pins);
+
-+out_unmap:
-+ iounmap(ssc->regs);
-+out_clk:
-+ clk_put(ssc->clk);
-+out_free:
-+ kfree(ssc);
-+out:
-+ return retval;
++ /* Deallocate the pins */
++ do {
++ old = pio->pinmux_mask;
++ new = old & ~pins;
++ } while (cmpxchg(&pio->pinmux_mask, old, new) != old);
+}
+
-+static int __devexit ssc_remove(struct platform_device *pdev)
++u32 at32_gpio_get_value_multiple(unsigned int port, u32 pins)
+{
-+ struct ssc_device *ssc = platform_get_drvdata(pdev);
++ struct pio_device *pio;
+
-+ spin_lock(&user_lock);
-+ iounmap(ssc->regs);
-+ clk_put(ssc->clk);
-+ list_del(&ssc->list);
-+ kfree(ssc);
-+ spin_unlock(&user_lock);
++ pio = &pio_dev[port];
++ BUG_ON(port > ARRAY_SIZE(pio_dev) || !pio->regs);
+
-+ return 0;
++ return pio_readl(pio, PDSR) & pins;
+}
+
-+static struct platform_driver ssc_driver = {
-+ .remove = __devexit_p(ssc_remove),
-+ .driver = {
-+ .name = "ssc",
-+ },
-+};
-+
-+static int __init ssc_init(void)
++void at32_gpio_set_value_multiple(unsigned int port, u32 value, u32 mask)
+{
-+ return platform_driver_probe(&ssc_driver, ssc_probe);
-+}
-+module_init(ssc_init);
++ struct pio_device *pio;
+
-+static void __exit ssc_exit(void)
-+{
-+ platform_driver_unregister(&ssc_driver);
++ pio = &pio_dev[port];
++ BUG_ON(port > ARRAY_SIZE(pio_dev) || !pio->regs);
++
++ /* No atomic updates for now... */
++ pio_writel(pio, CODR, ~value & mask);
++ pio_writel(pio, SODR, value & mask);
+}
-+module_exit(ssc_exit);
+
-+MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
-+MODULE_DESCRIPTION("SSC driver for Atmel AVR32 and AT91");
-+MODULE_LICENSE("GPL");
-diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
-index e23082f..1de1716 100644
---- a/drivers/mmc/host/Kconfig
-+++ b/drivers/mmc/host/Kconfig
-@@ -74,6 +74,16 @@ config MMC_AT91
-
- If unsure, say N.
-
-+config MMC_ATMELMCI
-+ tristate "Atmel Multimedia Card Interface support"
-+ depends on AVR32 && MMC
-+ help
-+ This selects the Atmel Multimedia Card Interface. If you have
-+ a AT91 (ARM) or AT32 (AVR32) platform with a Multimedia Card
-+ slot, say Y or M here.
++#endif /* CONFIG_GPIO_DEV */
+
-+ If unsure, say N.
+
- config MMC_IMX
- tristate "Motorola i.MX Multimedia Card Interface support"
- depends on ARCH_IMX
-diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
-index 6685f64..4b8e6e2 100644
---- a/drivers/mmc/host/Makefile
-+++ b/drivers/mmc/host/Makefile
-@@ -14,5 +14,6 @@ obj-$(CONFIG_MMC_WBSD) += wbsd.o
- obj-$(CONFIG_MMC_AU1X) += au1xmmc.o
- obj-$(CONFIG_MMC_OMAP) += omap.o
- obj-$(CONFIG_MMC_AT91) += at91_mci.o
-+obj-$(CONFIG_MMC_ATMELMCI) += atmel-mci.o
- obj-$(CONFIG_MMC_TIFM_SD) += tifm_sd.o
+ /*--------------------------------------------------------------------------*/
+
+ /* GPIO API */
+@@ -318,6 +394,8 @@ static void pio_bank_show(struct seq_fil
+ const char *label;
+
+ label = gpiochip_is_requested(chip, i);
++ if (!label && (imr & mask))
++ label = "[irq]";
+ if (!label)
+ continue;
+
+--- a/arch/avr32/mach-at32ap/pio.h
++++ b/arch/avr32/mach-at32ap/pio.h
+@@ -57,7 +57,7 @@
+
+ /* Bitfields in IFDR */
+
+-/* Bitfields in ISFR */
++/* Bitfields in IFSR */
+
+ /* Bitfields in SODR */
-diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
-new file mode 100644
-index 0000000..45323c9
--- /dev/null
-+++ b/drivers/mmc/host/atmel-mci.c
-@@ -0,0 +1,1161 @@
++++ b/arch/avr32/mach-at32ap/pm-at32ap700x.S
+@@ -0,0 +1,174 @@
+/*
-+ * Atmel MultiMedia Card Interface driver
++ * Low-level Power Management code.
+ *
-+ * Copyright (C) 2004-2006 Atmel Corporation
++ * Copyright (C) 2008 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
-+#include <linux/blkdev.h>
-+#include <linux/clk.h>
-+#include <linux/device.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/ioport.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
++#include <asm/asm.h>
++#include <asm/asm-offsets.h>
++#include <asm/thread_info.h>
++#include <asm/arch/pm.h>
+
-+#include <linux/mmc/host.h>
++#include "pm.h"
++#include "sdramc.h"
+
-+#include <asm/dma-controller.h>
-+#include <asm/io.h>
-+#include <asm/arch/board.h>
-+#include <asm/arch/gpio.h>
++/* Same as 0xfff00000 but fits in a 21 bit signed immediate */
++#define PM_BASE -0x100000
+
-+#include "atmel-mci.h"
++ .section .bss, "wa", @nobits
++ .global disable_idle_sleep
++ .type disable_idle_sleep, @object
++disable_idle_sleep:
++ .int 4
++ .size disable_idle_sleep, . - disable_idle_sleep
+
-+#define DRIVER_NAME "atmel_mci"
++ /* Keep this close to the irq handlers */
++ .section .irq.text, "ax", @progbits
+
-+#define MCI_DATA_ERROR_FLAGS (MCI_BIT(DCRCE) | MCI_BIT(DTOE) | \
-+ MCI_BIT(OVRE) | MCI_BIT(UNRE))
++ /*
++ * void cpu_enter_idle(void)
++ *
++ * Put the CPU into "idle" mode, in which it will consume
++ * significantly less power.
++ *
++ * If an interrupt comes along in the window between
++ * unmask_interrupts and the sleep instruction below, the
++ * interrupt code will adjust the return address so that we
++ * never execute the sleep instruction. This is required
++ * because the AP7000 doesn't unmask interrupts when entering
++ * sleep modes; later CPUs may not need this workaround.
++ */
++ .global cpu_enter_idle
++ .type cpu_enter_idle, @function
++cpu_enter_idle:
++ mask_interrupts
++ get_thread_info r8
++ ld.w r9, r8[TI_flags]
++ bld r9, TIF_NEED_RESCHED
++ brcs .Lret_from_sleep
++ sbr r9, TIF_CPU_GOING_TO_SLEEP
++ st.w r8[TI_flags], r9
++ unmask_interrupts
++ sleep CPU_SLEEP_IDLE
++ .size cpu_idle_sleep, . - cpu_idle_sleep
+
-+enum {
-+ EVENT_CMD_COMPLETE = 0,
-+ EVENT_DATA_COMPLETE,
-+ EVENT_DATA_ERROR,
-+ EVENT_STOP_SENT,
-+ EVENT_STOP_COMPLETE,
-+ EVENT_DMA_ERROR,
-+ EVENT_CARD_DETECT,
-+};
++ /*
++ * Common return path for PM functions that don't run from
++ * SRAM.
++ */
++ .global cpu_idle_skip_sleep
++ .type cpu_idle_skip_sleep, @function
++cpu_idle_skip_sleep:
++ mask_interrupts
++ ld.w r9, r8[TI_flags]
++ cbr r9, TIF_CPU_GOING_TO_SLEEP
++ st.w r8[TI_flags], r9
++.Lret_from_sleep:
++ unmask_interrupts
++ retal r12
++ .size cpu_idle_skip_sleep, . - cpu_idle_skip_sleep
+
-+struct atmel_mci_dma {
-+ struct dma_request_sg req;
-+ unsigned short rx_periph_id;
-+ unsigned short tx_periph_id;
-+};
++#ifdef CONFIG_PM
++ .section .init.text, "ax", @progbits
+
-+struct atmel_mci {
-+ struct mmc_host *mmc;
-+ void __iomem *regs;
-+ struct atmel_mci_dma dma;
++ .global pm_exception
++ .type pm_exception, @function
++pm_exception:
++ /*
++ * Exceptions are masked when we switch to this handler, so
++ * we'll only get "unrecoverable" exceptions (offset 0.)
++ */
++ sub r12, pc, . - .Lpanic_msg
++ lddpc pc, .Lpanic_addr
++
++ .align 2
++.Lpanic_addr:
++ .long panic
++.Lpanic_msg:
++ .asciz "Unrecoverable exception during suspend\n"
++ .size pm_exception, . - pm_exception
++
++ .global pm_irq0
++ .type pm_irq0, @function
++pm_irq0:
++ /* Disable interrupts and return after the sleep instruction */
++ mfsr r9, SYSREG_RSR_INT0
++ mtsr SYSREG_RAR_INT0, r8
++ sbr r9, SYSREG_GM_OFFSET
++ mtsr SYSREG_RSR_INT0, r9
++ rete
+
-+ struct mmc_request *mrq;
-+ struct mmc_command *cmd;
-+ struct mmc_data *data;
++ /*
++ * void cpu_enter_standby(unsigned long sdramc_base)
++ *
++ * Enter PM_SUSPEND_STANDBY mode. At this point, all drivers
++ * are suspended and interrupts are disabled. Interrupts
++ * marked as 'wakeup' event sources may still come along and
++ * get us out of here.
++ *
++ * The SDRAM will be put into self-refresh mode (which does
++ * not require a clock from the CPU), and the CPU will be put
++ * into "frozen" mode (HSB bus stopped). The SDRAM controller
++ * will automatically bring the SDRAM into normal mode on the
++ * first access, and the power manager will automatically
++ * start the HSB and CPU clocks upon a wakeup event.
++ *
++ * This code uses the same "skip sleep" technique as above.
++ * It is very important that we jump directly to
++ * cpu_after_sleep after the sleep instruction since that's
++ * where we'll end up if the interrupt handler decides that we
++ * need to skip the sleep instruction.
++ */
++ .global pm_standby
++ .type pm_standby, @function
++pm_standby:
++ /*
++ * interrupts are already masked at this point, and EVBA
++ * points to pm_exception above.
++ */
++ ld.w r10, r12[SDRAMC_LPR]
++ sub r8, pc, . - 1f /* return address for irq handler */
++ mov r11, SDRAMC_LPR_LPCB_SELF_RFR
++ bfins r10, r11, 0, 2 /* LPCB <- self Refresh */
++ sync 0 /* flush write buffer */
++ st.w r12[SDRAMC_LPR], r11 /* put SDRAM in self-refresh mode */
++ ld.w r11, r12[SDRAMC_LPR]
++ unmask_interrupts
++ sleep CPU_SLEEP_FROZEN
++1: mask_interrupts
++ retal r12
++ .size pm_standby, . - pm_standby
++
++ .global pm_suspend_to_ram
++ .type pm_suspend_to_ram, @function
++pm_suspend_to_ram:
++ /*
++ * interrupts are already masked at this point, and EVBA
++ * points to pm_exception above.
++ */
++ mov r11, 0
++ cache r11[2], 8 /* clean all dcache lines */
++ sync 0 /* flush write buffer */
++ ld.w r10, r12[SDRAMC_LPR]
++ sub r8, pc, . - 1f /* return address for irq handler */
++ mov r11, SDRAMC_LPR_LPCB_SELF_RFR
++ bfins r10, r11, 0, 2 /* LPCB <- self refresh */
++ st.w r12[SDRAMC_LPR], r10 /* put SDRAM in self-refresh mode */
++ ld.w r11, r12[SDRAMC_LPR]
+
-+ u32 cmd_status;
-+ u32 data_status;
-+ u32 stop_status;
-+ u32 stop_cmdr;
++ unmask_interrupts
++ sleep CPU_SLEEP_STOP
++1: mask_interrupts
+
-+ struct tasklet_struct tasklet;
-+ unsigned long pending_events;
-+ unsigned long completed_events;
++ retal r12
++ .size pm_suspend_to_ram, . - pm_suspend_to_ram
+
-+ int present;
-+ int detect_pin;
-+ int wp_pin;
++ .global pm_sram_end
++ .type pm_sram_end, @function
++pm_sram_end:
++ .size pm_sram_end, 0
+
-+ unsigned long bus_hz;
-+ unsigned long mapbase;
-+ struct clk *mck;
-+ struct platform_device *pdev;
++#endif /* CONFIG_PM */
+--- /dev/null
++++ b/arch/avr32/mach-at32ap/pm.c
+@@ -0,0 +1,245 @@
++/*
++ * AVR32 AP Power Management
++ *
++ * Copyright (C) 2008 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * version 2 as published by the Free Software Foundation.
++ */
++#include <linux/io.h>
++#include <linux/suspend.h>
++#include <linux/vmalloc.h>
+
-+#ifdef CONFIG_DEBUG_FS
-+ struct dentry *debugfs_root;
-+ struct dentry *debugfs_regs;
-+ struct dentry *debugfs_req;
-+ struct dentry *debugfs_pending_events;
-+ struct dentry *debugfs_completed_events;
-+#endif
-+};
++#include <asm/cacheflush.h>
++#include <asm/sysreg.h>
+
-+/* Those printks take an awful lot of time... */
-+#ifndef DEBUG
-+static unsigned int fmax = 15000000U;
-+#else
-+static unsigned int fmax = 1000000U;
-+#endif
-+module_param(fmax, uint, 0444);
-+MODULE_PARM_DESC(fmax, "Max frequency in Hz of the MMC bus clock");
++#include <asm/arch/pm.h>
++#include <asm/arch/sram.h>
+
-+/* Test bit macros for completed events */
-+#define mci_cmd_is_complete(host) \
-+ test_bit(EVENT_CMD_COMPLETE, &host->completed_events)
-+#define mci_data_is_complete(host) \
-+ test_bit(EVENT_DATA_COMPLETE, &host->completed_events)
-+#define mci_data_error_is_complete(host) \
-+ test_bit(EVENT_DATA_ERROR, &host->completed_events)
-+#define mci_stop_sent_is_complete(host) \
-+ test_bit(EVENT_STOP_SENT, &host->completed_events)
-+#define mci_stop_is_complete(host) \
-+ test_bit(EVENT_STOP_COMPLETE, &host->completed_events)
-+#define mci_dma_error_is_complete(host) \
-+ test_bit(EVENT_DMA_ERROR, &host->completed_events)
-+#define mci_card_detect_is_complete(host) \
-+ test_bit(EVENT_CARD_DETECT, &host->completed_events)
++/* FIXME: This is only valid for AP7000 */
++#define SDRAMC_BASE 0xfff03800
+
-+/* Test and clear bit macros for pending events */
-+#define mci_clear_cmd_is_pending(host) \
-+ test_and_clear_bit(EVENT_CMD_COMPLETE, &host->pending_events)
-+#define mci_clear_data_is_pending(host) \
-+ test_and_clear_bit(EVENT_DATA_COMPLETE, &host->pending_events)
-+#define mci_clear_data_error_is_pending(host) \
-+ test_and_clear_bit(EVENT_DATA_ERROR, &host->pending_events)
-+#define mci_clear_stop_sent_is_pending(host) \
-+ test_and_clear_bit(EVENT_STOP_SENT, &host->pending_events)
-+#define mci_clear_stop_is_pending(host) \
-+ test_and_clear_bit(EVENT_STOP_COMPLETE, &host->pending_events)
-+#define mci_clear_dma_error_is_pending(host) \
-+ test_and_clear_bit(EVENT_DMA_ERROR, &host->pending_events)
-+#define mci_clear_card_detect_is_pending(host) \
-+ test_and_clear_bit(EVENT_CARD_DETECT, &host->pending_events)
++#include "sdramc.h"
+
-+/* Test and set bit macros for completed events */
-+#define mci_set_cmd_is_completed(host) \
-+ test_and_set_bit(EVENT_CMD_COMPLETE, &host->completed_events)
-+#define mci_set_data_is_completed(host) \
-+ test_and_set_bit(EVENT_DATA_COMPLETE, &host->completed_events)
-+#define mci_set_data_error_is_completed(host) \
-+ test_and_set_bit(EVENT_DATA_ERROR, &host->completed_events)
-+#define mci_set_stop_sent_is_completed(host) \
-+ test_and_set_bit(EVENT_STOP_SENT, &host->completed_events)
-+#define mci_set_stop_is_completed(host) \
-+ test_and_set_bit(EVENT_STOP_COMPLETE, &host->completed_events)
-+#define mci_set_dma_error_is_completed(host) \
-+ test_and_set_bit(EVENT_DMA_ERROR, &host->completed_events)
-+#define mci_set_card_detect_is_completed(host) \
-+ test_and_set_bit(EVENT_CARD_DETECT, &host->completed_events)
++#define SRAM_PAGE_FLAGS (SYSREG_BIT(TLBELO_D) | SYSREG_BF(SZ, 1) \
++ | SYSREG_BF(AP, 3) | SYSREG_BIT(G))
+
-+/* Set bit macros for completed events */
-+#define mci_set_cmd_complete(host) \
-+ set_bit(EVENT_CMD_COMPLETE, &host->completed_events)
-+#define mci_set_data_complete(host) \
-+ set_bit(EVENT_DATA_COMPLETE, &host->completed_events)
-+#define mci_set_data_error_complete(host) \
-+ set_bit(EVENT_DATA_ERROR, &host->completed_events)
-+#define mci_set_stop_sent_complete(host) \
-+ set_bit(EVENT_STOP_SENT, &host->completed_events)
-+#define mci_set_stop_complete(host) \
-+ set_bit(EVENT_STOP_COMPLETE, &host->completed_events)
-+#define mci_set_dma_error_complete(host) \
-+ set_bit(EVENT_DMA_ERROR, &host->completed_events)
-+#define mci_set_card_detect_complete(host) \
-+ set_bit(EVENT_CARD_DETECT, &host->completed_events)
+
-+/* Set bit macros for pending events */
-+#define mci_set_cmd_pending(host) \
-+ set_bit(EVENT_CMD_COMPLETE, &host->pending_events)
-+#define mci_set_data_pending(host) \
-+ set_bit(EVENT_DATA_COMPLETE, &host->pending_events)
-+#define mci_set_data_error_pending(host) \
-+ set_bit(EVENT_DATA_ERROR, &host->pending_events)
-+#define mci_set_stop_sent_pending(host) \
-+ set_bit(EVENT_STOP_SENT, &host->pending_events)
-+#define mci_set_stop_pending(host) \
-+ set_bit(EVENT_STOP_COMPLETE, &host->pending_events)
-+#define mci_set_dma_error_pending(host) \
-+ set_bit(EVENT_DMA_ERROR, &host->pending_events)
-+#define mci_set_card_detect_pending(host) \
-+ set_bit(EVENT_CARD_DETECT, &host->pending_events)
++static unsigned long pm_sram_start;
++static size_t pm_sram_size;
++static struct vm_struct *pm_sram_area;
+
-+/* Clear bit macros for pending events */
-+#define mci_clear_cmd_pending(host) \
-+ clear_bit(EVENT_CMD_COMPLETE, &host->pending_events)
-+#define mci_clear_data_pending(host) \
-+ clear_bit(EVENT_DATA_COMPLETE, &host->pending_events)
-+#define mci_clear_data_error_pending(host) \
-+ clear_bit(EVENT_DATA_ERROR, &host->pending_events)
-+#define mci_clear_stop_sent_pending(host) \
-+ clear_bit(EVENT_STOP_SENT, &host->pending_events)
-+#define mci_clear_stop_pending(host) \
-+ clear_bit(EVENT_STOP_COMPLETE, &host->pending_events)
-+#define mci_clear_dma_error_pending(host) \
-+ clear_bit(EVENT_DMA_ERROR, &host->pending_events)
-+#define mci_clear_card_detect_pending(host) \
-+ clear_bit(EVENT_CARD_DETECT, &host->pending_events)
++static void (*avr32_pm_enter_standby)(unsigned long sdramc_base);
++static void (*avr32_pm_enter_str)(unsigned long sdramc_base);
+
++/*
++ * Must be called with interrupts disabled. Exceptions will be masked
++ * on return (i.e. all exceptions will be "unrecoverable".)
++ */
++static void *avr32_pm_map_sram(void)
++{
++ unsigned long vaddr;
++ unsigned long page_addr;
++ u32 tlbehi;
++ u32 mmucr;
+
-+#ifdef CONFIG_DEBUG_FS
-+#include <linux/debugfs.h>
++ vaddr = (unsigned long)pm_sram_area->addr;
++ page_addr = pm_sram_start & PAGE_MASK;
+
-+#define DBG_REQ_BUF_SIZE (4096 - sizeof(unsigned int))
++ /*
++ * Mask exceptions and grab the first TLB entry. We won't be
++ * needing it while sleeping.
++ */
++ asm volatile("ssrf %0" : : "i"(SYSREG_EM_OFFSET) : "memory");
+
-+struct req_dbg_data {
-+ unsigned int nbytes;
-+ char str[DBG_REQ_BUF_SIZE];
-+};
++ mmucr = sysreg_read(MMUCR);
++ tlbehi = sysreg_read(TLBEHI);
++ sysreg_write(MMUCR, SYSREG_BFINS(DRP, 0, mmucr));
+
-+static int req_dbg_open(struct inode *inode, struct file *file)
++ tlbehi = SYSREG_BF(ASID, SYSREG_BFEXT(ASID, tlbehi));
++ tlbehi |= vaddr & PAGE_MASK;
++ tlbehi |= SYSREG_BIT(TLBEHI_V);
++
++ sysreg_write(TLBELO, page_addr | SRAM_PAGE_FLAGS);
++ sysreg_write(TLBEHI, tlbehi);
++ __builtin_tlbw();
++
++ return (void *)(vaddr + pm_sram_start - page_addr);
++}
++
++/*
++ * Must be called with interrupts disabled. Exceptions will be
++ * unmasked on return.
++ */
++static void avr32_pm_unmap_sram(void)
+{
-+ struct atmel_mci *host;
-+ struct mmc_request *mrq;
-+ struct mmc_command *cmd, *stop;
-+ struct mmc_data *data;
-+ struct req_dbg_data *priv;
-+ char *str;
-+ unsigned long n = 0;
++ u32 mmucr;
++ u32 tlbehi;
++ u32 tlbarlo;
+
-+ priv = kzalloc(DBG_REQ_BUF_SIZE, GFP_KERNEL);
-+ if (!priv)
-+ return -ENOMEM;
-+ str = priv->str;
++ /* Going to update TLB entry at index 0 */
++ mmucr = sysreg_read(MMUCR);
++ tlbehi = sysreg_read(TLBEHI);
++ sysreg_write(MMUCR, SYSREG_BFINS(DRP, 0, mmucr));
+
-+ mutex_lock(&inode->i_mutex);
-+ host = inode->i_private;
++ /* Clear the "valid" bit */
++ tlbehi = SYSREG_BF(ASID, SYSREG_BFEXT(ASID, tlbehi));
++ sysreg_write(TLBEHI, tlbehi);
+
-+ spin_lock_irq(&host->mmc->lock);
-+ mrq = host->mrq;
-+ if (mrq) {
-+ cmd = mrq->cmd;
-+ data = mrq->data;
-+ stop = mrq->stop;
-+ n = snprintf(str, DBG_REQ_BUF_SIZE,
-+ "CMD%u(0x%x) %x %x %x %x %x (err %u)\n",
-+ cmd->opcode, cmd->arg, cmd->flags,
-+ cmd->resp[0], cmd->resp[1], cmd->resp[2],
-+ cmd->resp[3], cmd->error);
-+ if (n < DBG_REQ_BUF_SIZE && data)
-+ n += snprintf(str + n, DBG_REQ_BUF_SIZE - n,
-+ "DATA %u * %u (%u) %x (err %u)\n",
-+ data->blocks, data->blksz,
-+ data->bytes_xfered, data->flags,
-+ data->error);
-+ if (n < DBG_REQ_BUF_SIZE && stop)
-+ n += snprintf(str + n, DBG_REQ_BUF_SIZE - n,
-+ "CMD%u(0x%x) %x %x %x %x %x (err %u)\n",
-+ stop->opcode, stop->arg, stop->flags,
-+ stop->resp[0], stop->resp[1],
-+ stop->resp[2], stop->resp[3],
-+ stop->error);
-+ }
-+ spin_unlock_irq(&host->mmc->lock);
-+ mutex_unlock(&inode->i_mutex);
++ /* Mark it as "not accessed" */
++ tlbarlo = sysreg_read(TLBARLO);
++ sysreg_write(TLBARLO, tlbarlo | 0x80000000U);
+
-+ priv->nbytes = min(n, DBG_REQ_BUF_SIZE);
-+ file->private_data = priv;
++ /* Update the TLB */
++ __builtin_tlbw();
+
-+ return 0;
++ /* Unmask exceptions */
++ asm volatile("csrf %0" : : "i"(SYSREG_EM_OFFSET) : "memory");
+}
+
-+static ssize_t req_dbg_read(struct file *file, char __user *buf,
-+ size_t nbytes, loff_t *ppos)
++static int avr32_pm_valid_state(suspend_state_t state)
+{
-+ struct req_dbg_data *priv = file->private_data;
++ switch (state) {
++ case PM_SUSPEND_ON:
++ case PM_SUSPEND_STANDBY:
++ case PM_SUSPEND_MEM:
++ return 1;
+
-+ return simple_read_from_buffer(buf, nbytes, ppos,
-+ priv->str, priv->nbytes);
++ default:
++ return 0;
++ }
+}
+
-+static int req_dbg_release(struct inode *inode, struct file *file)
++static int avr32_pm_enter(suspend_state_t state)
+{
-+ kfree(file->private_data);
-+ return 0;
-+}
++ u32 lpr_saved;
++ u32 evba_saved;
++ void *sram;
+
-+static const struct file_operations req_dbg_fops = {
-+ .owner = THIS_MODULE,
-+ .open = req_dbg_open,
-+ .llseek = no_llseek,
-+ .read = req_dbg_read,
-+ .release = req_dbg_release,
-+};
++ switch (state) {
++ case PM_SUSPEND_STANDBY:
++ sram = avr32_pm_map_sram();
+
-+static int regs_dbg_open(struct inode *inode, struct file *file)
-+{
-+ struct atmel_mci *host;
-+ unsigned int i;
-+ u32 *data;
-+ int ret = -ENOMEM;
++ /* Switch to in-sram exception handlers */
++ evba_saved = sysreg_read(EVBA);
++ sysreg_write(EVBA, (unsigned long)sram);
+
-+ mutex_lock(&inode->i_mutex);
-+ host = inode->i_private;
-+ data = kmalloc(inode->i_size, GFP_KERNEL);
-+ if (!data)
-+ goto out;
++ /*
++ * Save the LPR register so that we can re-enable
++ * SDRAM Low Power mode on resume.
++ */
++ lpr_saved = sdramc_readl(LPR);
++ pr_debug("%s: Entering standby...\n", __func__);
++ avr32_pm_enter_standby(SDRAMC_BASE);
++ sdramc_writel(LPR, lpr_saved);
+
-+ spin_lock_irq(&host->mmc->lock);
-+ for (i = 0; i < inode->i_size / 4; i++)
-+ data[i] = __raw_readl(host->regs + i * 4);
-+ spin_unlock_irq(&host->mmc->lock);
++ /* Switch back to regular exception handlers */
++ sysreg_write(EVBA, evba_saved);
+
-+ file->private_data = data;
-+ ret = 0;
++ avr32_pm_unmap_sram();
++ break;
+
-+out:
-+ mutex_unlock(&inode->i_mutex);
++ case PM_SUSPEND_MEM:
++ sram = avr32_pm_map_sram();
+
-+ return ret;
-+}
++ /* Switch to in-sram exception handlers */
++ evba_saved = sysreg_read(EVBA);
++ sysreg_write(EVBA, (unsigned long)sram);
+
-+static ssize_t regs_dbg_read(struct file *file, char __user *buf,
-+ size_t nbytes, loff_t *ppos)
-+{
-+ struct inode *inode = file->f_dentry->d_inode;
-+ int ret;
++ /*
++ * Save the LPR register so that we can re-enable
++ * SDRAM Low Power mode on resume.
++ */
++ lpr_saved = sdramc_readl(LPR);
++ pr_debug("%s: Entering suspend-to-ram...\n", __func__);
++ avr32_pm_enter_str(SDRAMC_BASE);
++ sdramc_writel(LPR, lpr_saved);
+
-+ mutex_lock(&inode->i_mutex);
-+ ret = simple_read_from_buffer(buf, nbytes, ppos,
-+ file->private_data,
-+ file->f_dentry->d_inode->i_size);
-+ mutex_unlock(&inode->i_mutex);
++ /* Switch back to regular exception handlers */
++ sysreg_write(EVBA, evba_saved);
+
-+ return ret;
-+}
++ avr32_pm_unmap_sram();
++ break;
+
-+static int regs_dbg_release(struct inode *inode, struct file *file)
-+{
-+ kfree(file->private_data);
++ case PM_SUSPEND_ON:
++ pr_debug("%s: Entering idle...\n", __func__);
++ cpu_enter_idle();
++ break;
++
++ default:
++ pr_debug("%s: Invalid suspend state %d\n", __func__, state);
++ goto out;
++ }
++
++ pr_debug("%s: wakeup\n", __func__);
++
++out:
+ return 0;
+}
+
-+static const struct file_operations regs_dbg_fops = {
-+ .owner = THIS_MODULE,
-+ .open = regs_dbg_open,
-+ .llseek = generic_file_llseek,
-+ .read = regs_dbg_read,
-+ .release = regs_dbg_release,
++static struct platform_suspend_ops avr32_pm_ops = {
++ .valid = avr32_pm_valid_state,
++ .enter = avr32_pm_enter,
+};
+
-+static void atmci_init_debugfs(struct atmel_mci *host)
++static unsigned long avr32_pm_offset(void *symbol)
+{
-+ struct mmc_host *mmc;
-+ struct dentry *root, *regs;
-+ struct resource *res;
-+
-+ mmc = host->mmc;
-+ root = debugfs_create_dir(mmc_hostname(mmc), NULL);
-+ if (IS_ERR(root) || !root)
-+ goto err_root;
-+ host->debugfs_root = root;
++ extern u8 pm_exception[];
+
-+ regs = debugfs_create_file("regs", 0400, root, host, ®s_dbg_fops);
-+ if (!regs)
-+ goto err_regs;
-+
-+ res = platform_get_resource(host->pdev, IORESOURCE_MEM, 0);
-+ regs->d_inode->i_size = res->end - res->start + 1;
-+ host->debugfs_regs = regs;
-+
-+ host->debugfs_req = debugfs_create_file("req", 0400, root,
-+ host, &req_dbg_fops);
-+ if (!host->debugfs_req)
-+ goto err_req;
-+
-+ host->debugfs_pending_events
-+ = debugfs_create_u32("pending_events", 0400, root,
-+ (u32 *)&host->pending_events);
-+ if (!host->debugfs_pending_events)
-+ goto err_pending_events;
-+
-+ host->debugfs_completed_events
-+ = debugfs_create_u32("completed_events", 0400, root,
-+ (u32 *)&host->completed_events);
-+ if (!host->debugfs_completed_events)
-+ goto err_completed_events;
-+
-+ return;
-+
-+err_completed_events:
-+ debugfs_remove(host->debugfs_pending_events);
-+err_pending_events:
-+ debugfs_remove(host->debugfs_req);
-+err_req:
-+ debugfs_remove(host->debugfs_regs);
-+err_regs:
-+ debugfs_remove(host->debugfs_root);
-+err_root:
-+ host->debugfs_root = NULL;
-+ dev_err(&host->pdev->dev,
-+ "failed to initialize debugfs for %s\n",
-+ mmc_hostname(mmc));
++ return (unsigned long)symbol - (unsigned long)pm_exception;
+}
+
-+static void atmci_cleanup_debugfs(struct atmel_mci *host)
-+{
-+ if (host->debugfs_root) {
-+ debugfs_remove(host->debugfs_completed_events);
-+ debugfs_remove(host->debugfs_pending_events);
-+ debugfs_remove(host->debugfs_req);
-+ debugfs_remove(host->debugfs_regs);
-+ debugfs_remove(host->debugfs_root);
-+ host->debugfs_root = NULL;
-+ }
-+}
-+#else
-+static inline void atmci_init_debugfs(struct atmel_mci *host)
++static int __init avr32_pm_init(void)
+{
++ extern u8 pm_exception[];
++ extern u8 pm_irq0[];
++ extern u8 pm_standby[];
++ extern u8 pm_suspend_to_ram[];
++ extern u8 pm_sram_end[];
++ void *dst;
+
-+}
++ /*
++ * To keep things simple, we depend on not needing more than a
++ * single page.
++ */
++ pm_sram_size = avr32_pm_offset(pm_sram_end);
++ if (pm_sram_size > PAGE_SIZE)
++ goto err;
+
-+static inline void atmci_cleanup_debugfs(struct atmel_mci *host)
-+{
++ pm_sram_start = sram_alloc(pm_sram_size);
++ if (!pm_sram_start)
++ goto err_alloc_sram;
+
-+}
-+#endif /* CONFIG_DEBUG_FS */
++ /* Grab a virtual area we can use later on. */
++ pm_sram_area = get_vm_area(pm_sram_size, VM_IOREMAP);
++ if (!pm_sram_area)
++ goto err_vm_area;
++ pm_sram_area->phys_addr = pm_sram_start;
+
-+static inline unsigned int ns_to_clocks(struct atmel_mci *host,
-+ unsigned int ns)
-+{
-+ return (ns * (host->bus_hz / 1000000) + 999) / 1000;
-+}
++ local_irq_disable();
++ dst = avr32_pm_map_sram();
++ memcpy(dst, pm_exception, pm_sram_size);
++ flush_dcache_region(dst, pm_sram_size);
++ invalidate_icache_region(dst, pm_sram_size);
++ avr32_pm_unmap_sram();
++ local_irq_enable();
+
-+static void atmci_set_timeout(struct atmel_mci *host,
-+ struct mmc_data *data)
-+{
-+ static unsigned dtomul_to_shift[] = {
-+ 0, 4, 7, 8, 10, 12, 16, 20
-+ };
-+ unsigned timeout;
-+ unsigned dtocyc, dtomul;
++ avr32_pm_enter_standby = dst + avr32_pm_offset(pm_standby);
++ avr32_pm_enter_str = dst + avr32_pm_offset(pm_suspend_to_ram);
++ intc_set_suspend_handler(avr32_pm_offset(pm_irq0));
+
-+ timeout = ns_to_clocks(host, data->timeout_ns) + data->timeout_clks;
++ suspend_set_ops(&avr32_pm_ops);
+
-+ for (dtomul = 0; dtomul < 8; dtomul++) {
-+ unsigned shift = dtomul_to_shift[dtomul];
-+ dtocyc = (timeout + (1 << shift) - 1) >> shift;
-+ if (dtocyc < 15)
-+ break;
-+ }
++ printk("AVR32 AP Power Management enabled\n");
+
-+ if (dtomul >= 8) {
-+ dtomul = 7;
-+ dtocyc = 15;
-+ }
++ return 0;
+
-+ dev_dbg(&host->mmc->class_dev, "setting timeout to %u cycles\n",
-+ dtocyc << dtomul_to_shift[dtomul]);
-+ mci_writel(host, DTOR, (MCI_BF(DTOMUL, dtomul)
-+ | MCI_BF(DTOCYC, dtocyc)));
++err_vm_area:
++ sram_free(pm_sram_start, pm_sram_size);
++err_alloc_sram:
++err:
++ pr_err("AVR32 Power Management initialization failed\n");
++ return -ENOMEM;
+}
-+
++arch_initcall(avr32_pm_init);
+--- /dev/null
++++ b/arch/avr32/mach-at32ap/sdramc.h
+@@ -0,0 +1,76 @@
+/*
-+ * Return mask with command flags to be enabled for this command.
++ * Register definitions for the AT32AP SDRAM Controller
++ *
++ * Copyright (C) 2008 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * version 2 as published by the Free Software Foundation.
+ */
-+static u32 atmci_prepare_command(struct mmc_host *mmc,
-+ struct mmc_command *cmd)
-+{
-+ u32 cmdr;
-+
-+ cmd->error = MMC_ERR_NONE;
-+
-+ cmdr = MCI_BF(CMDNB, cmd->opcode);
-+
-+ if (cmd->flags & MMC_RSP_PRESENT) {
-+ if (cmd->flags & MMC_RSP_136)
-+ cmdr |= MCI_BF(RSPTYP, MCI_RSPTYP_136_BIT);
-+ else
-+ cmdr |= MCI_BF(RSPTYP, MCI_RSPTYP_48_BIT);
-+ }
+
-+ /*
-+ * This should really be MAXLAT_5 for CMD2 and ACMD41, but
-+ * it's too difficult to determine whether this is an ACMD or
-+ * not. Better make it 64.
-+ */
-+ cmdr |= MCI_BIT(MAXLAT);
-+
-+ if (mmc->ios.bus_mode == MMC_BUSMODE_OPENDRAIN)
-+ cmdr |= MCI_BIT(OPDCMD);
-+
-+ dev_dbg(&mmc->class_dev,
-+ "cmd: op %02x arg %08x flags %08x, cmdflags %08lx\n",
-+ cmd->opcode, cmd->arg, cmd->flags, (unsigned long)cmdr);
-+
-+ return cmdr;
-+}
++/* Register offsets */
++#define SDRAMC_MR 0x0000
++#define SDRAMC_TR 0x0004
++#define SDRAMC_CR 0x0008
++#define SDRAMC_HSR 0x000c
++#define SDRAMC_LPR 0x0010
++#define SDRAMC_IER 0x0014
++#define SDRAMC_IDR 0x0018
++#define SDRAMC_IMR 0x001c
++#define SDRAMC_ISR 0x0020
++#define SDRAMC_MDR 0x0024
++
++/* MR - Mode Register */
++#define SDRAMC_MR_MODE_NORMAL ( 0 << 0)
++#define SDRAMC_MR_MODE_NOP ( 1 << 0)
++#define SDRAMC_MR_MODE_BANKS_PRECHARGE ( 2 << 0)
++#define SDRAMC_MR_MODE_LOAD_MODE ( 3 << 0)
++#define SDRAMC_MR_MODE_AUTO_REFRESH ( 4 << 0)
++#define SDRAMC_MR_MODE_EXT_LOAD_MODE ( 5 << 0)
++#define SDRAMC_MR_MODE_POWER_DOWN ( 6 << 0)
++
++/* CR - Configuration Register */
++#define SDRAMC_CR_NC_8_BITS ( 0 << 0)
++#define SDRAMC_CR_NC_9_BITS ( 1 << 0)
++#define SDRAMC_CR_NC_10_BITS ( 2 << 0)
++#define SDRAMC_CR_NC_11_BITS ( 3 << 0)
++#define SDRAMC_CR_NR_11_BITS ( 0 << 2)
++#define SDRAMC_CR_NR_12_BITS ( 1 << 2)
++#define SDRAMC_CR_NR_13_BITS ( 2 << 2)
++#define SDRAMC_CR_NB_2_BANKS ( 0 << 4)
++#define SDRAMC_CR_NB_4_BANKS ( 1 << 4)
++#define SDRAMC_CR_CAS(x) ((x) << 5)
++#define SDRAMC_CR_DBW_32_BITS ( 0 << 7)
++#define SDRAMC_CR_DBW_16_BITS ( 1 << 7)
++#define SDRAMC_CR_TWR(x) ((x) << 8)
++#define SDRAMC_CR_TRC(x) ((x) << 12)
++#define SDRAMC_CR_TRP(x) ((x) << 16)
++#define SDRAMC_CR_TRCD(x) ((x) << 20)
++#define SDRAMC_CR_TRAS(x) ((x) << 24)
++#define SDRAMC_CR_TXSR(x) ((x) << 28)
++
++/* HSR - High Speed Register */
++#define SDRAMC_HSR_DA ( 1 << 0)
++
++/* LPR - Low Power Register */
++#define SDRAMC_LPR_LPCB_INHIBIT ( 0 << 0)
++#define SDRAMC_LPR_LPCB_SELF_RFR ( 1 << 0)
++#define SDRAMC_LPR_LPCB_PDOWN ( 2 << 0)
++#define SDRAMC_LPR_LPCB_DEEP_PDOWN ( 3 << 0)
++#define SDRAMC_LPR_PASR(x) ((x) << 4)
++#define SDRAMC_LPR_TCSR(x) ((x) << 8)
++#define SDRAMC_LPR_DS(x) ((x) << 10)
++#define SDRAMC_LPR_TIMEOUT(x) ((x) << 12)
++
++/* IER/IDR/IMR/ISR - Interrupt Enable/Disable/Mask/Status Register */
++#define SDRAMC_ISR_RES ( 1 << 0)
++
++/* MDR - Memory Device Register */
++#define SDRAMC_MDR_MD_SDRAM ( 0 << 0)
++#define SDRAMC_MDR_MD_LOW_PWR_SDRAM ( 1 << 0)
+
-+static void atmci_start_command(struct atmel_mci *host,
-+ struct mmc_command *cmd,
-+ u32 cmd_flags)
-+{
-+ WARN_ON(host->cmd);
-+ host->cmd = cmd;
-+
-+ mci_writel(host, ARGR, cmd->arg);
-+ mci_writel(host, CMDR, cmd_flags);
-+
-+ if (cmd->data)
-+ dma_start_request(host->dma.req.req.dmac,
-+ host->dma.req.req.channel);
-+}
-+
-+/*
-+ * Returns a mask of flags to be set in the command register when the
-+ * command to start the transfer is to be sent.
-+ */
-+static u32 atmci_prepare_data(struct mmc_host *mmc, struct mmc_data *data)
-+{
-+ struct atmel_mci *host = mmc_priv(mmc);
-+ u32 cmd_flags;
-+
-+ WARN_ON(host->data);
-+ host->data = data;
-+
-+ atmci_set_timeout(host, data);
-+ mci_writel(host, BLKR, (MCI_BF(BCNT, data->blocks)
-+ | MCI_BF(BLKLEN, data->blksz)));
-+ host->dma.req.block_size = data->blksz;
-+ host->dma.req.nr_blocks = data->blocks;
-+
-+ cmd_flags = MCI_BF(TRCMD, MCI_TRCMD_START_TRANS);
-+ if (data->flags & MMC_DATA_STREAM)
-+ cmd_flags |= MCI_BF(TRTYP, MCI_TRTYP_STREAM);
-+ else if (data->blocks > 1)
-+ cmd_flags |= MCI_BF(TRTYP, MCI_TRTYP_MULTI_BLOCK);
-+ else
-+ cmd_flags |= MCI_BF(TRTYP, MCI_TRTYP_BLOCK);
-+
-+ if (data->flags & MMC_DATA_READ) {
-+ cmd_flags |= MCI_BIT(TRDIR);
-+ host->dma.req.nr_sg
-+ = dma_map_sg(&host->pdev->dev, data->sg,
-+ data->sg_len, DMA_FROM_DEVICE);
-+ host->dma.req.periph_id = host->dma.rx_periph_id;
-+ host->dma.req.direction = DMA_DIR_PERIPH_TO_MEM;
-+ host->dma.req.data_reg = host->mapbase + MCI_RDR;
-+ } else {
-+ host->dma.req.nr_sg
-+ = dma_map_sg(&host->pdev->dev, data->sg,
-+ data->sg_len, DMA_TO_DEVICE);
-+ host->dma.req.periph_id = host->dma.tx_periph_id;
-+ host->dma.req.direction = DMA_DIR_MEM_TO_PERIPH;
-+ host->dma.req.data_reg = host->mapbase + MCI_TDR;
-+ }
-+ host->dma.req.sg = data->sg;
-+
-+ dma_prepare_request_sg(host->dma.req.req.dmac, &host->dma.req);
-+
-+ return cmd_flags;
-+}
-+
-+static void atmci_request(struct mmc_host *mmc, struct mmc_request *mrq)
-+{
-+ struct atmel_mci *host = mmc_priv(mmc);
-+ struct mmc_data *data = mrq->data;
-+ u32 iflags;
-+ u32 cmdflags = 0;
-+
-+ iflags = mci_readl(host, IMR);
-+ if (iflags)
-+ dev_warn(&mmc->class_dev, "WARNING: IMR=0x%08x\n",
-+ mci_readl(host, IMR));
-+
-+ WARN_ON(host->mrq != NULL);
-+ host->mrq = mrq;
-+ host->pending_events = 0;
-+ host->completed_events = 0;
-+
-+ iflags = MCI_BIT(CMDRDY);
-+ cmdflags = atmci_prepare_command(mmc, mrq->cmd);
-+
-+ if (mrq->stop) {
-+ WARN_ON(!data);
-+
-+ host->stop_cmdr = atmci_prepare_command(mmc, mrq->stop);
-+ host->stop_cmdr |= MCI_BF(TRCMD, MCI_TRCMD_STOP_TRANS);
-+ if (!(data->flags & MMC_DATA_WRITE))
-+ host->stop_cmdr |= MCI_BIT(TRDIR);
-+ if (data->flags & MMC_DATA_STREAM)
-+ host->stop_cmdr |= MCI_BF(TRTYP, MCI_TRTYP_STREAM);
-+ else
-+ host->stop_cmdr |= MCI_BF(TRTYP, MCI_TRTYP_MULTI_BLOCK);
-+ }
-+ if (data) {
-+ cmdflags |= atmci_prepare_data(mmc, data);
-+ iflags |= MCI_DATA_ERROR_FLAGS;
-+ }
-+
-+ atmci_start_command(host, mrq->cmd, cmdflags);
-+ mci_writel(host, IER, iflags);
-+}
-+
-+static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
-+{
-+ struct atmel_mci *host = mmc_priv(mmc);
-+ u32 mr;
-+
-+ if (ios->clock) {
-+ u32 clkdiv;
-+
-+ /* Set clock rate */
-+ clkdiv = host->bus_hz / (2 * ios->clock) - 1;
-+ if (clkdiv > 255) {
-+ dev_warn(&mmc->class_dev,
-+ "clock %u too slow; using %lu\n",
-+ ios->clock, host->bus_hz / (2 * 256));
-+ clkdiv = 255;
-+ }
-+
-+ mr = mci_readl(host, MR);
-+ mr = MCI_BFINS(CLKDIV, clkdiv, mr)
-+ | MCI_BIT(WRPROOF) | MCI_BIT(RDPROOF);
-+ mci_writel(host, MR, mr);
-+
-+ /* Enable the MCI controller */
-+ mci_writel(host, CR, MCI_BIT(MCIEN));
-+ } else {
-+ /* Disable the MCI controller */
-+ mci_writel(host, CR, MCI_BIT(MCIDIS));
-+ }
-+
-+ switch (ios->bus_width) {
-+ case MMC_BUS_WIDTH_1:
-+ mci_writel(host, SDCR, 0);
-+ break;
-+ case MMC_BUS_WIDTH_4:
-+ mci_writel(host, SDCR, MCI_BIT(SDCBUS));
-+ break;
-+ }
-+
-+ switch (ios->power_mode) {
-+ case MMC_POWER_ON:
-+ /* Send init sequence (74 clock cycles) */
-+ mci_writel(host, IDR, ~0UL);
-+ mci_writel(host, CMDR, MCI_BF(SPCMD, MCI_SPCMD_INIT_CMD));
-+ while (!(mci_readl(host, SR) & MCI_BIT(CMDRDY)))
-+ cpu_relax();
-+ break;
-+ default:
-+ /*
-+ * TODO: None of the currently available AVR32-based
-+ * boards allow MMC power to be turned off. Implement
-+ * power control when this can be tested properly.
-+ */
-+ break;
-+ }
-+}
-+
-+static int atmci_get_ro(struct mmc_host *mmc)
-+{
-+ int read_only = 0;
-+ struct atmel_mci *host = mmc_priv(mmc);
-+
-+ if (host->wp_pin >= 0) {
-+ read_only = gpio_get_value(host->wp_pin);
-+ dev_dbg(&mmc->class_dev, "card is %s\n",
-+ read_only ? "read-only" : "read-write");
-+ } else {
-+ dev_dbg(&mmc->class_dev,
-+ "no pin for checking read-only switch."
-+ " Assuming write-enable.\n");
-+ }
-+
-+ return read_only;
-+}
-+
-+static struct mmc_host_ops atmci_ops = {
-+ .request = atmci_request,
-+ .set_ios = atmci_set_ios,
-+ .get_ro = atmci_get_ro,
-+};
-+
-+static void atmci_request_end(struct mmc_host *mmc, struct mmc_request *mrq)
-+{
-+ struct atmel_mci *host = mmc_priv(mmc);
-+
-+ WARN_ON(host->cmd || host->data);
-+ host->mrq = NULL;
-+
-+ mmc_request_done(mmc, mrq);
-+}
-+
-+static void send_stop_cmd(struct mmc_host *mmc, struct mmc_data *data,
-+ u32 flags)
-+{
-+ struct atmel_mci *host = mmc_priv(mmc);
-+
-+ atmci_start_command(host, data->stop, host->stop_cmdr | flags);
-+ mci_writel(host, IER, MCI_BIT(CMDRDY));
-+}
-+
-+static void atmci_data_complete(struct atmel_mci *host, struct mmc_data *data)
-+{
-+ host->data = NULL;
-+ dma_unmap_sg(&host->pdev->dev, data->sg, host->dma.req.nr_sg,
-+ ((data->flags & MMC_DATA_WRITE)
-+ ? DMA_TO_DEVICE : DMA_FROM_DEVICE));
++/* Register access macros */
++#define sdramc_readl(reg) \
++ __raw_readl((void __iomem __force *)SDRAMC_BASE + SDRAMC_##reg)
++#define sdramc_writel(reg, value) \
++ __raw_writel(value, (void __iomem __force *)SDRAMC_BASE + SDRAMC_##reg)
+--- a/arch/avr32/mach-at32ap/time-tc.c
++++ /dev/null
+@@ -1,218 +0,0 @@
+-/*
+- * Copyright (C) 2004-2007 Atmel Corporation
+- *
+- * Based on MIPS implementation arch/mips/kernel/time.c
+- * Copyright 2001 MontaVista Software Inc.
+- *
+- * This program is free software; you can redistribute it and/or modify
+- * it under the terms of the GNU General Public License version 2 as
+- * published by the Free Software Foundation.
+- */
+-
+-#include <linux/clk.h>
+-#include <linux/clocksource.h>
+-#include <linux/time.h>
+-#include <linux/module.h>
+-#include <linux/interrupt.h>
+-#include <linux/irq.h>
+-#include <linux/kernel_stat.h>
+-#include <linux/errno.h>
+-#include <linux/init.h>
+-#include <linux/profile.h>
+-#include <linux/sysdev.h>
+-#include <linux/err.h>
+-
+-#include <asm/div64.h>
+-#include <asm/sysreg.h>
+-#include <asm/io.h>
+-#include <asm/sections.h>
+-
+-#include <asm/arch/time.h>
+-
+-/* how many counter cycles in a jiffy? */
+-static u32 cycles_per_jiffy;
+-
+-/* the count value for the next timer interrupt */
+-static u32 expirelo;
+-
+-/* the I/O registers of the TC module */
+-static void __iomem *ioregs;
+-
+-cycle_t read_cycle_count(void)
+-{
+- return (cycle_t)timer_read(ioregs, 0, CV);
+-}
+-
+-struct clocksource clocksource_avr32 = {
+- .name = "avr32",
+- .rating = 342,
+- .read = read_cycle_count,
+- .mask = CLOCKSOURCE_MASK(16),
+- .shift = 16,
+- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+-};
+-
+-static void avr32_timer_ack(void)
+-{
+- u16 count = expirelo;
+-
+- /* Ack this timer interrupt and set the next one, use a u16
+- * variable so it will wrap around correctly */
+- count += cycles_per_jiffy;
+- expirelo = count;
+- timer_write(ioregs, 0, RC, expirelo);
+-
+- /* Check to see if we have missed any timer interrupts */
+- count = timer_read(ioregs, 0, CV);
+- if ((count - expirelo) < 0x7fff) {
+- expirelo = count + cycles_per_jiffy;
+- timer_write(ioregs, 0, RC, expirelo);
+- }
+-}
+-
+-u32 avr32_hpt_read(void)
+-{
+- return timer_read(ioregs, 0, CV);
+-}
+-
+-static int avr32_timer_calc_div_and_set_jiffies(struct clk *pclk)
+-{
+- unsigned int cycles_max = (clocksource_avr32.mask + 1) / 2;
+- unsigned int divs[] = { 4, 8, 16, 32 };
+- int divs_size = ARRAY_SIZE(divs);
+- int i = 0;
+- unsigned long count_hz;
+- unsigned long shift;
+- unsigned long mult;
+- int clock_div = -1;
+- u64 tmp;
+-
+- shift = clocksource_avr32.shift;
+-
+- do {
+- count_hz = clk_get_rate(pclk) / divs[i];
+- mult = clocksource_hz2mult(count_hz, shift);
+- clocksource_avr32.mult = mult;
+-
+- tmp = TICK_NSEC;
+- tmp <<= shift;
+- tmp += mult / 2;
+- do_div(tmp, mult);
+-
+- cycles_per_jiffy = tmp;
+- } while (cycles_per_jiffy > cycles_max && ++i < divs_size);
+-
+- clock_div = i + 1;
+-
+- if (clock_div > divs_size) {
+- pr_debug("timer: could not calculate clock divider\n");
+- return -EFAULT;
+- }
+-
+- /* Set the clock divider */
+- timer_write(ioregs, 0, CMR, TIMER_BF(CMR_TCCLKS, clock_div));
+-
+- return 0;
+-}
+-
+-int avr32_hpt_init(unsigned int count)
+-{
+- struct resource *regs;
+- struct clk *pclk;
+- int irq = -1;
+- int ret = 0;
+-
+- ret = -ENXIO;
+-
+- irq = platform_get_irq(&at32_systc0_device, 0);
+- if (irq < 0) {
+- pr_debug("timer: could not get irq\n");
+- goto out_error;
+- }
+-
+- pclk = clk_get(&at32_systc0_device.dev, "pclk");
+- if (IS_ERR(pclk)) {
+- pr_debug("timer: could not get clk: %ld\n", PTR_ERR(pclk));
+- goto out_error;
+- }
+- clk_enable(pclk);
+-
+- regs = platform_get_resource(&at32_systc0_device, IORESOURCE_MEM, 0);
+- if (!regs) {
+- pr_debug("timer: could not get resource\n");
+- goto out_error_clk;
+- }
+-
+- ioregs = ioremap(regs->start, regs->end - regs->start + 1);
+- if (!ioregs) {
+- pr_debug("timer: could not get ioregs\n");
+- goto out_error_clk;
+- }
+-
+- ret = avr32_timer_calc_div_and_set_jiffies(pclk);
+- if (ret)
+- goto out_error_io;
+-
+- ret = setup_irq(irq, &timer_irqaction);
+- if (ret) {
+- pr_debug("timer: could not request irq %d: %d\n",
+- irq, ret);
+- goto out_error_io;
+- }
+-
+- expirelo = (timer_read(ioregs, 0, CV) / cycles_per_jiffy + 1)
+- * cycles_per_jiffy;
+-
+- /* Enable clock and interrupts on RC compare */
+- timer_write(ioregs, 0, CCR, TIMER_BIT(CCR_CLKEN));
+- timer_write(ioregs, 0, IER, TIMER_BIT(IER_CPCS));
+- /* Set cycles to first interrupt */
+- timer_write(ioregs, 0, RC, expirelo);
+-
+- printk(KERN_INFO "timer: AT32AP system timer/counter at 0x%p irq %d\n",
+- ioregs, irq);
+-
+- return 0;
+-
+-out_error_io:
+- iounmap(ioregs);
+-out_error_clk:
+- clk_put(pclk);
+-out_error:
+- return ret;
+-}
+-
+-int avr32_hpt_start(void)
+-{
+- timer_write(ioregs, 0, CCR, TIMER_BIT(CCR_SWTRG));
+- return 0;
+-}
+-
+-irqreturn_t timer_interrupt(int irq, void *dev_id)
+-{
+- unsigned int sr = timer_read(ioregs, 0, SR);
+-
+- if (sr & TIMER_BIT(SR_CPCS)) {
+- /* ack timer interrupt and try to set next interrupt */
+- avr32_timer_ack();
+-
+- /*
+- * Call the generic timer interrupt handler
+- */
+- write_seqlock(&xtime_lock);
+- do_timer(1);
+- write_sequnlock(&xtime_lock);
+-
+- /*
+- * In UP mode, we call local_timer_interrupt() to do profiling
+- * and process accounting.
+- *
+- * SMP is not supported yet.
+- */
+- local_timer_interrupt(irq, dev_id);
+-
+- return IRQ_HANDLED;
+- }
+-
+- return IRQ_NONE;
+-}
+--- a/arch/avr32/mm/init.c
++++ b/arch/avr32/mm/init.c
+@@ -11,6 +11,7 @@
+ #include <linux/swap.h>
+ #include <linux/init.h>
+ #include <linux/mmzone.h>
++#include <linux/module.h>
+ #include <linux/bootmem.h>
+ #include <linux/pagemap.h>
+ #include <linux/nodemask.h>
+@@ -23,20 +24,20 @@
+ #include <asm/setup.h>
+ #include <asm/sections.h>
+
++#define __page_aligned __attribute__((section(".data.page_aligned")))
+
+ DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
+
+-pgd_t swapper_pg_dir[PTRS_PER_PGD];
++pgd_t swapper_pg_dir[PTRS_PER_PGD] __page_aligned;
+
+ struct page *empty_zero_page;
++EXPORT_SYMBOL(empty_zero_page);
+
+ /*
+ * Cache of MMU context last used.
+ */
+ unsigned long mmu_context_cache = NO_CONTEXT;
+
+-#define START_PFN (NODE_DATA(0)->bdata->node_boot_start >> PAGE_SHIFT)
+-#define MAX_LOW_PFN (NODE_DATA(0)->bdata->node_low_pfn)
+-
+ void show_mem(void)
+ {
+ int total = 0, reserved = 0, cached = 0;
+@@ -109,19 +110,9 @@ void __init paging_init(void)
+ zero_page = alloc_bootmem_low_pages_node(NODE_DATA(0),
+ PAGE_SIZE);
+
+- {
+- pgd_t *pg_dir;
+- int i;
+-
+- pg_dir = swapper_pg_dir;
+- sysreg_write(PTBR, (unsigned long)pg_dir);
+-
+- for (i = 0; i < PTRS_PER_PGD; i++)
+- pgd_val(pg_dir[i]) = 0;
+-
+- enable_mmu();
+- printk ("CPU: Paging enabled\n");
+- }
++ sysreg_write(PTBR, (unsigned long)swapper_pg_dir);
++ enable_mmu();
++ printk ("CPU: Paging enabled\n");
+
+ for_each_online_node(nid) {
+ pg_data_t *pgdat = NODE_DATA(nid);
+--- a/arch/avr32/mm/tlb.c
++++ b/arch/avr32/mm/tlb.c
+@@ -11,21 +11,21 @@
+
+ #include <asm/mmu_context.h>
+
+-#define _TLBEHI_I 0x100
++/* TODO: Get the correct number from the CONFIG1 system register */
++#define NR_TLB_ENTRIES 32
+
+-void show_dtlb_entry(unsigned int index)
++static void show_dtlb_entry(unsigned int index)
+ {
+- unsigned int tlbehi, tlbehi_save, tlbelo, mmucr, mmucr_save;
++ u32 tlbehi, tlbehi_save, tlbelo, mmucr, mmucr_save;
+ unsigned long flags;
+
+ local_irq_save(flags);
+ mmucr_save = sysreg_read(MMUCR);
+ tlbehi_save = sysreg_read(TLBEHI);
+- mmucr = mmucr_save & 0x13;
+- mmucr |= index << 14;
++ mmucr = SYSREG_BFINS(DRP, index, mmucr_save);
+ sysreg_write(MMUCR, mmucr);
+
+- asm volatile("tlbr" : : : "memory");
++ __builtin_tlbr();
+ cpu_sync_pipeline();
+
+ tlbehi = sysreg_read(TLBEHI);
+@@ -33,15 +33,17 @@ void show_dtlb_entry(unsigned int index)
+
+ printk("%2u: %c %c %02x %05x %05x %o %o %c %c %c %c\n",
+ index,
+- (tlbehi & 0x200)?'1':'0',
+- (tlbelo & 0x100)?'1':'0',
+- (tlbehi & 0xff),
+- (tlbehi >> 12), (tlbelo >> 12),
+- (tlbelo >> 4) & 7, (tlbelo >> 2) & 3,
+- (tlbelo & 0x200)?'1':'0',
+- (tlbelo & 0x080)?'1':'0',
+- (tlbelo & 0x001)?'1':'0',
+- (tlbelo & 0x002)?'1':'0');
++ SYSREG_BFEXT(TLBEHI_V, tlbehi) ? '1' : '0',
++ SYSREG_BFEXT(G, tlbelo) ? '1' : '0',
++ SYSREG_BFEXT(ASID, tlbehi),
++ SYSREG_BFEXT(VPN, tlbehi) >> 2,
++ SYSREG_BFEXT(PFN, tlbelo) >> 2,
++ SYSREG_BFEXT(AP, tlbelo),
++ SYSREG_BFEXT(SZ, tlbelo),
++ SYSREG_BFEXT(TLBELO_C, tlbelo) ? 'C' : ' ',
++ SYSREG_BFEXT(B, tlbelo) ? 'B' : ' ',
++ SYSREG_BFEXT(W, tlbelo) ? 'W' : ' ',
++ SYSREG_BFEXT(TLBELO_D, tlbelo) ? 'D' : ' ');
+
+ sysreg_write(MMUCR, mmucr_save);
+ sysreg_write(TLBEHI, tlbehi_save);
+@@ -54,29 +56,33 @@ void dump_dtlb(void)
+ unsigned int i;
+
+ printk("ID V G ASID VPN PFN AP SZ C B W D\n");
+- for (i = 0; i < 32; i++)
++ for (i = 0; i < NR_TLB_ENTRIES; i++)
+ show_dtlb_entry(i);
+ }
+
+-static unsigned long last_mmucr;
+-
+-static inline void set_replacement_pointer(unsigned shift)
++static void update_dtlb(unsigned long address, pte_t pte)
+ {
+- unsigned long mmucr, mmucr_save;
++ u32 tlbehi;
++ u32 mmucr;
+
+- mmucr = mmucr_save = sysreg_read(MMUCR);
+ /*
-+ * Data might complete before command for very short transfers
-+ * (like READ_SCR)
++ * We're not changing the ASID here, so no need to flush the
++ * pipeline.
+ */
-+ if (mci_cmd_is_complete(host)
-+ && (!data->stop || mci_stop_is_complete(host)))
-+ atmci_request_end(host->mmc, data->mrq);
-+}
-+
-+static void atmci_command_complete(struct atmel_mci *host,
-+ struct mmc_command *cmd, u32 status)
-+{
-+ if (status & MCI_BIT(RTOE))
-+ cmd->error = MMC_ERR_TIMEOUT;
-+ else if ((cmd->flags & MMC_RSP_CRC)
-+ && (status & MCI_BIT(RCRCE)))
-+ cmd->error = MMC_ERR_BADCRC;
-+ else if (status & (MCI_BIT(RINDE) | MCI_BIT(RDIRE) | MCI_BIT(RENDE)))
-+ cmd->error = MMC_ERR_FAILED;
-+
-+ if (cmd->error != MMC_ERR_NONE) {
-+ dev_dbg(&host->mmc->class_dev,
-+ "command error: op=0x%x status=0x%08x\n",
-+ cmd->opcode, status);
-+
-+ if (cmd->data) {
-+ dma_stop_request(host->dma.req.req.dmac,
-+ host->dma.req.req.channel);
-+ mci_writel(host, IDR, MCI_BIT(NOTBUSY)
-+ | MCI_DATA_ERROR_FLAGS);
-+ host->data = NULL;
-+ }
-+ }
-+}
-+
-+static void atmci_tasklet_func(unsigned long priv)
-+{
-+ struct mmc_host *mmc = (struct mmc_host *)priv;
-+ struct atmel_mci *host = mmc_priv(mmc);
-+ struct mmc_request *mrq = host->mrq;
-+ struct mmc_data *data = host->data;
-+
-+ dev_vdbg(&mmc->class_dev,
-+ "tasklet: pending/completed/mask %lx/%lx/%x\n",
-+ host->pending_events, host->completed_events,
-+ mci_readl(host, IMR));
-+
-+ if (mci_clear_cmd_is_pending(host)) {
-+ mci_set_cmd_complete(host);
-+ atmci_command_complete(host, mrq->cmd, host->cmd_status);
-+ if (!host->data || mci_data_is_complete(host)
-+ || mci_data_error_is_complete(host))
-+ atmci_request_end(mmc, mrq);
-+ }
-+ if (mci_clear_stop_is_pending(host)) {
-+ mci_set_stop_complete(host);
-+ atmci_command_complete(host, mrq->stop, host->stop_status);
-+ if (mci_data_is_complete(host)
-+ || mci_data_error_is_complete(host))
-+ atmci_request_end(mmc, mrq);
-+ }
-+ if (mci_clear_dma_error_is_pending(host)) {
-+ mci_set_dma_error_complete(host);
-+ mci_clear_data_pending(host);
-+
-+ /* DMA controller got bus error => invalid address */
-+ data->error = MMC_ERR_INVALID;
-+
-+ dev_dbg(&mmc->class_dev, "dma error after %u bytes xfered\n",
-+ host->data->bytes_xfered);
-+
-+ if (data->stop
-+ && !mci_set_stop_sent_is_completed(host))
-+ /* TODO: Check if card is still present */
-+ send_stop_cmd(host->mmc, data, 0);
-+
-+ atmci_data_complete(host, data);
-+ }
-+ if (mci_clear_data_error_is_pending(host)) {
-+ u32 status = host->data_status;
-+
-+ mci_set_data_error_complete(host);
-+ mci_clear_data_pending(host);
++ tlbehi = sysreg_read(TLBEHI);
++ tlbehi = SYSREG_BF(ASID, SYSREG_BFEXT(ASID, tlbehi));
++ tlbehi |= address & MMU_VPN_MASK;
++ tlbehi |= SYSREG_BIT(TLBEHI_V);
++ sysreg_write(TLBEHI, tlbehi);
+
+ /* Does this mapping already exist? */
+- __asm__ __volatile__(
+- " tlbs\n"
+- " mfsr %0, %1"
+- : "=r"(mmucr)
+- : "i"(SYSREG_MMUCR));
++ __builtin_tlbs();
++ mmucr = sysreg_read(MMUCR);
+
+ if (mmucr & SYSREG_BIT(MMUCR_N)) {
+ /* Not found -- pick a not-recently-accessed entry */
+- unsigned long rp;
+- unsigned long tlbar = sysreg_read(TLBARLO);
++ unsigned int rp;
++ u32 tlbar = sysreg_read(TLBARLO);
+
+ rp = 32 - fls(tlbar);
+ if (rp == 32) {
+@@ -84,30 +90,14 @@ static inline void set_replacement_point
+ sysreg_write(TLBARLO, -1L);
+ }
+
+- mmucr &= 0x13;
+- mmucr |= (rp << shift);
+-
++ mmucr = SYSREG_BFINS(DRP, rp, mmucr);
+ sysreg_write(MMUCR, mmucr);
+ }
+
+- last_mmucr = mmucr;
+-}
+-
+-static void update_dtlb(unsigned long address, pte_t pte, unsigned long asid)
+-{
+- unsigned long vpn;
+-
+- vpn = (address & MMU_VPN_MASK) | _TLBEHI_VALID | asid;
+- sysreg_write(TLBEHI, vpn);
+- cpu_sync_pipeline();
+-
+- set_replacement_pointer(14);
+-
+ sysreg_write(TLBELO, pte_val(pte) & _PAGE_FLAGS_HARDWARE_MASK);
+
+ /* Let's go */
+- asm volatile("nop\n\ttlbw" : : : "memory");
+- cpu_sync_pipeline();
++ __builtin_tlbw();
+ }
+
+ void update_mmu_cache(struct vm_area_struct *vma,
+@@ -120,39 +110,40 @@ void update_mmu_cache(struct vm_area_str
+ return;
+
+ local_irq_save(flags);
+- update_dtlb(address, pte, get_asid());
++ update_dtlb(address, pte);
+ local_irq_restore(flags);
+ }
+
+-void __flush_tlb_page(unsigned long asid, unsigned long page)
++static void __flush_tlb_page(unsigned long asid, unsigned long page)
+ {
+- unsigned long mmucr, tlbehi;
++ u32 mmucr, tlbehi;
+
+- page |= asid;
+- sysreg_write(TLBEHI, page);
+- cpu_sync_pipeline();
+- asm volatile("tlbs");
++ /*
++ * Caller is responsible for masking out non-PFN bits in page
++ * and changing the current ASID if necessary. This means that
++ * we don't need to flush the pipeline after writing TLBEHI.
++ */
++ tlbehi = page | asid;
++ sysreg_write(TLBEHI, tlbehi);
+
-+ dma_stop_request(host->dma.req.req.dmac,
-+ host->dma.req.req.channel);
++ __builtin_tlbs();
+ mmucr = sysreg_read(MMUCR);
+
+ if (!(mmucr & SYSREG_BIT(MMUCR_N))) {
+- unsigned long tlbarlo;
+- unsigned long entry;
++ unsigned int entry;
++ u32 tlbarlo;
+
+ /* Clear the "valid" bit */
+- tlbehi = sysreg_read(TLBEHI);
+- tlbehi &= ~_TLBEHI_VALID;
+ sysreg_write(TLBEHI, tlbehi);
+- cpu_sync_pipeline();
+
+ /* mark the entry as "not accessed" */
+- entry = (mmucr >> 14) & 0x3f;
++ entry = SYSREG_BFEXT(DRP, mmucr);
+ tlbarlo = sysreg_read(TLBARLO);
+- tlbarlo |= (0x80000000 >> entry);
++ tlbarlo |= (0x80000000UL >> entry);
+ sysreg_write(TLBARLO, tlbarlo);
+
+ /* update the entry with valid bit clear */
+- asm volatile("tlbw");
+- cpu_sync_pipeline();
++ __builtin_tlbw();
+ }
+ }
+
+@@ -190,17 +181,22 @@ void flush_tlb_range(struct vm_area_stru
+
+ local_irq_save(flags);
+ size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
++
+ if (size > (MMU_DTLB_ENTRIES / 4)) { /* Too many entries to flush */
+ mm->context = NO_CONTEXT;
+ if (mm == current->mm)
+ activate_context(mm);
+ } else {
+- unsigned long asid = mm->context & MMU_CONTEXT_ASID_MASK;
+- unsigned long saved_asid = MMU_NO_ASID;
++ unsigned long asid;
++ unsigned long saved_asid;
++
++ asid = mm->context & MMU_CONTEXT_ASID_MASK;
++ saved_asid = MMU_NO_ASID;
+
+ start &= PAGE_MASK;
+ end += (PAGE_SIZE - 1);
+ end &= PAGE_MASK;
++
+ if (mm != current->mm) {
+ saved_asid = get_asid();
+ set_asid(asid);
+@@ -218,33 +214,34 @@ void flush_tlb_range(struct vm_area_stru
+ }
+
+ /*
+- * TODO: If this is only called for addresses > TASK_SIZE, we can probably
+- * skip the ASID stuff and just use the Global bit...
++ * This function depends on the pages to be flushed having the G
++ * (global) bit set in their pte. This is true for all
++ * PAGE_KERNEL(_RO) pages.
+ */
+ void flush_tlb_kernel_range(unsigned long start, unsigned long end)
+ {
+ unsigned long flags;
+ int size;
+
+- local_irq_save(flags);
+ size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
+ if (size > (MMU_DTLB_ENTRIES / 4)) { /* Too many entries to flush */
+ flush_tlb_all();
+ } else {
+- unsigned long asid = init_mm.context & MMU_CONTEXT_ASID_MASK;
+- unsigned long saved_asid = get_asid();
++ unsigned long asid;
+
-+ if (status & MCI_BIT(DCRCE)) {
-+ dev_dbg(&mmc->class_dev, "data CRC error\n");
-+ data->error = MMC_ERR_BADCRC;
-+ } else if (status & MCI_BIT(DTOE)) {
-+ dev_dbg(&mmc->class_dev, "data timeout error\n");
-+ data->error = MMC_ERR_TIMEOUT;
-+ } else {
-+ dev_dbg(&mmc->class_dev, "data FIFO error\n");
-+ data->error = MMC_ERR_FIFO;
-+ }
-+ dev_dbg(&mmc->class_dev, "bytes xfered: %u\n",
-+ data->bytes_xfered);
++ local_irq_save(flags);
++ asid = get_asid();
+
+ start &= PAGE_MASK;
+ end += (PAGE_SIZE - 1);
+ end &= PAGE_MASK;
+- set_asid(asid);
++
+ while (start < end) {
+ __flush_tlb_page(asid, start);
+ start += PAGE_SIZE;
+ }
+- set_asid(saved_asid);
++ local_irq_restore(flags);
+ }
+- local_irq_restore(flags);
+ }
+
+ void flush_tlb_mm(struct mm_struct *mm)
+@@ -280,7 +277,7 @@ static void *tlb_start(struct seq_file *
+ {
+ static unsigned long tlb_index;
+
+- if (*pos >= 32)
++ if (*pos >= NR_TLB_ENTRIES)
+ return NULL;
+
+ tlb_index = 0;
+@@ -291,7 +288,7 @@ static void *tlb_next(struct seq_file *t
+ {
+ unsigned long *index = v;
+
+- if (*index >= 31)
++ if (*index >= NR_TLB_ENTRIES - 1)
+ return NULL;
+
+ ++*pos;
+@@ -313,16 +310,16 @@ static int tlb_show(struct seq_file *tlb
+ if (*index == 0)
+ seq_puts(tlb, "ID V G ASID VPN PFN AP SZ C B W D\n");
+
+- BUG_ON(*index >= 32);
++ BUG_ON(*index >= NR_TLB_ENTRIES);
+
+ local_irq_save(flags);
+ mmucr_save = sysreg_read(MMUCR);
+ tlbehi_save = sysreg_read(TLBEHI);
+- mmucr = mmucr_save & 0x13;
+- mmucr |= *index << 14;
++ mmucr = SYSREG_BFINS(DRP, *index, mmucr_save);
+ sysreg_write(MMUCR, mmucr);
+
+- asm volatile("tlbr" : : : "memory");
++ /* TLBR might change the ASID */
++ __builtin_tlbr();
+ cpu_sync_pipeline();
+
+ tlbehi = sysreg_read(TLBEHI);
+@@ -334,16 +331,18 @@ static int tlb_show(struct seq_file *tlb
+ local_irq_restore(flags);
+
+ seq_printf(tlb, "%2lu: %c %c %02x %05x %05x %o %o %c %c %c %c\n",
+- *index,
+- (tlbehi & 0x200)?'1':'0',
+- (tlbelo & 0x100)?'1':'0',
+- (tlbehi & 0xff),
+- (tlbehi >> 12), (tlbelo >> 12),
+- (tlbelo >> 4) & 7, (tlbelo >> 2) & 3,
+- (tlbelo & 0x200)?'1':'0',
+- (tlbelo & 0x080)?'1':'0',
+- (tlbelo & 0x001)?'1':'0',
+- (tlbelo & 0x002)?'1':'0');
++ *index,
++ SYSREG_BFEXT(TLBEHI_V, tlbehi) ? '1' : '0',
++ SYSREG_BFEXT(G, tlbelo) ? '1' : '0',
++ SYSREG_BFEXT(ASID, tlbehi),
++ SYSREG_BFEXT(VPN, tlbehi) >> 2,
++ SYSREG_BFEXT(PFN, tlbelo) >> 2,
++ SYSREG_BFEXT(AP, tlbelo),
++ SYSREG_BFEXT(SZ, tlbelo),
++ SYSREG_BFEXT(TLBELO_C, tlbelo) ? '1' : '0',
++ SYSREG_BFEXT(B, tlbelo) ? '1' : '0',
++ SYSREG_BFEXT(W, tlbelo) ? '1' : '0',
++ SYSREG_BFEXT(TLBELO_D, tlbelo) ? '1' : '0');
+
+ return 0;
+ }
+--- a/arch/avr32/oprofile/op_model_avr32.c
++++ b/arch/avr32/oprofile/op_model_avr32.c
+@@ -16,7 +16,6 @@
+ #include <linux/sched.h>
+ #include <linux/types.h>
+
+-#include <asm/intc.h>
+ #include <asm/sysreg.h>
+ #include <asm/system.h>
+
+--- a/drivers/char/Kconfig
++++ b/drivers/char/Kconfig
+@@ -706,7 +706,7 @@ config NVRAM
+
+ config RTC
+ tristate "Enhanced Real Time Clock Support"
+- depends on !PPC && !PARISC && !IA64 && !M68K && !SPARC && !FRV && !ARM && !SUPERH && !S390
++ depends on !PPC && !PARISC && !IA64 && !M68K && !SPARC && !FRV && !ARM && !SUPERH && !S390 && !AVR32
+ ---help---
+ If you say Y here and create a character special file /dev/rtc with
+ major number 10 and minor number 135 using mknod ("man mknod"), you
+@@ -776,7 +776,7 @@ config SGI_IP27_RTC
+
+ config GEN_RTC
+ tristate "Generic /dev/rtc emulation"
+- depends on RTC!=y && !IA64 && !ARM && !M32R && !MIPS && !SPARC && !FRV && !S390 && !SUPERH
++ depends on RTC!=y && !IA64 && !ARM && !M32R && !MIPS && !SPARC && !FRV && !S390 && !SUPERH && !AVR32
+ ---help---
+ If you say Y here and create a character special file /dev/rtc with
+ major number 10 and minor number 135 using mknod ("man mknod"), you
+--- a/drivers/char/keyboard.c
++++ b/drivers/char/keyboard.c
+@@ -1033,7 +1033,8 @@ DECLARE_TASKLET_DISABLED(keyboard_taskle
+ #if defined(CONFIG_X86) || defined(CONFIG_IA64) || defined(CONFIG_ALPHA) ||\
+ defined(CONFIG_MIPS) || defined(CONFIG_PPC) || defined(CONFIG_SPARC) ||\
+ defined(CONFIG_PARISC) || defined(CONFIG_SUPERH) ||\
+- (defined(CONFIG_ARM) && defined(CONFIG_KEYBOARD_ATKBD) && !defined(CONFIG_ARCH_RPC))
++ (defined(CONFIG_ARM) && defined(CONFIG_KEYBOARD_ATKBD) && !defined(CONFIG_ARCH_RPC)) ||\
++ defined(CONFIG_AVR32)
+
+ #define HW_RAW(dev) (test_bit(EV_MSC, dev->evbit) && test_bit(MSC_RAW, dev->mscbit) &&\
+ ((dev)->id.bustype == BUS_I8042) && ((dev)->id.vendor == 0x0001) && ((dev)->id.product == 0x0001))
+--- a/drivers/clocksource/Makefile
++++ b/drivers/clocksource/Makefile
+@@ -1,3 +1,4 @@
++obj-$(CONFIG_ATMEL_TCB_CLKSRC) += tcb_clksrc.o
+ obj-$(CONFIG_X86_CYCLONE_TIMER) += cyclone.o
+ obj-$(CONFIG_X86_PM_TIMER) += acpi_pm.o
+ obj-$(CONFIG_SCx200HR_TIMER) += scx200_hrt.o
+--- /dev/null
++++ b/drivers/clocksource/tcb_clksrc.c
+@@ -0,0 +1,302 @@
++#include <linux/init.h>
++#include <linux/clocksource.h>
++#include <linux/clockchips.h>
++#include <linux/interrupt.h>
++#include <linux/irq.h>
+
-+ if (data->stop
-+ && !mci_set_stop_sent_is_completed(host))
-+ /* TODO: Check if card is still present */
-+ send_stop_cmd(host->mmc, data, 0);
++#include <linux/clk.h>
++#include <linux/err.h>
++#include <linux/ioport.h>
++#include <linux/io.h>
++#include <linux/platform_device.h>
++#include <linux/atmel_tc.h>
+
-+ atmci_data_complete(host, data);
-+ }
-+ if (mci_clear_data_is_pending(host)) {
-+ mci_set_data_complete(host);
-+ data->bytes_xfered = data->blocks * data->blksz;
-+ atmci_data_complete(host, data);
-+ }
-+ if (mci_clear_card_detect_is_pending(host)) {
-+ /* Reset controller if card is gone */
-+ if (!host->present) {
-+ mci_writel(host, CR, MCI_BIT(SWRST));
-+ mci_writel(host, IDR, ~0UL);
-+ mci_writel(host, CR, MCI_BIT(MCIEN));
-+ }
+
-+ /* Clean up queue if present */
-+ if (mrq) {
-+ if (!mci_cmd_is_complete(host))
-+ mrq->cmd->error = MMC_ERR_TIMEOUT;
-+ if (mrq->data && !mci_data_is_complete(host)
-+ && !mci_data_error_is_complete(host)) {
-+ dma_stop_request(host->dma.req.req.dmac,
-+ host->dma.req.req.channel);
-+ host->data->error = MMC_ERR_TIMEOUT;
-+ atmci_data_complete(host, data);
-+ }
-+ if (mrq->stop && !mci_stop_is_complete(host))
-+ mrq->stop->error = MMC_ERR_TIMEOUT;
++/*
++ * We're configured to use a specific TC block, one that's not hooked
++ * up to external hardware, to provide a time solution:
++ *
++ * - Two channels combine to create a free-running 32 bit counter
++ * with a base rate of 5+ MHz, packaged as a clocksource (with
++ * resolution better than 200 nsec).
++ *
++ * - The third channel may be used to provide a 16-bit clockevent
++ * source, used in either periodic or oneshot mode. This runs
++ * at 32 KiHZ, and can handle delays of up to two seconds.
++ *
++ * A boot clocksource and clockevent source are also currently needed,
++ * unless the relevant platforms (ARM/AT91, AVR32/AT32) are changed so
++ * this code can be used when init_timers() is called, well before most
++ * devices are set up. (Some low end AT91 parts, which can run uClinux,
++ * have only the timers in one TC block... they currently don't support
++ * the tclib code, because of that initialization issue.)
++ *
++ * REVISIT behavior during system suspend states... we should disable
++ * all clocks and save the power. Easily done for clockevent devices,
++ * but clocksources won't necessarily get the needed notifications.
++ * For deeper system sleep states, this will be mandatory...
++ */
+
-+ host->cmd = NULL;
-+ atmci_request_end(mmc, mrq);
-+ }
-+ mmc_detect_change(host->mmc, msecs_to_jiffies(100));
-+ }
-+}
++static void __iomem *tcaddr;
+
-+static void atmci_cmd_interrupt(struct mmc_host *mmc, u32 status)
++static cycle_t tc_get_cycles(void)
+{
-+ struct atmel_mci *host = mmc_priv(mmc);
-+ struct mmc_command *cmd = host->cmd;
-+
-+ /*
-+ * Read the response now so that we're free to send a new
-+ * command immediately.
-+ */
-+ cmd->resp[0] = mci_readl(host, RSPR);
-+ cmd->resp[1] = mci_readl(host, RSPR);
-+ cmd->resp[2] = mci_readl(host, RSPR);
-+ cmd->resp[3] = mci_readl(host, RSPR);
-+
-+ mci_writel(host, IDR, MCI_BIT(CMDRDY));
-+ host->cmd = NULL;
++ unsigned long flags;
++ u32 lower, upper;
+
-+ if (mci_stop_sent_is_complete(host)) {
-+ host->stop_status = status;
-+ mci_set_stop_pending(host);
-+ } else {
-+ host->cmd_status = status;
-+ mci_set_cmd_pending(host);
-+ }
++ raw_local_irq_save(flags);
++ do {
++ upper = __raw_readl(tcaddr + ATMEL_TC_REG(1, CV));
++ lower = __raw_readl(tcaddr + ATMEL_TC_REG(0, CV));
++ } while (upper != __raw_readl(tcaddr + ATMEL_TC_REG(1, CV)));
+
-+ tasklet_schedule(&host->tasklet);
++ raw_local_irq_restore(flags);
++ return (upper << 16) | lower;
+}
+
-+static void atmci_xfer_complete(struct dma_request *_req)
-+{
-+ struct dma_request_sg *req = to_dma_request_sg(_req);
-+ struct atmel_mci_dma *dma;
-+ struct atmel_mci *host;
-+ struct mmc_data *data;
-+
-+ dma = container_of(req, struct atmel_mci_dma, req);
-+ host = container_of(dma, struct atmel_mci, dma);
-+ data = host->data;
++static struct clocksource clksrc = {
++ .name = "tcb_clksrc",
++ .rating = 200,
++ .read = tc_get_cycles,
++ .mask = CLOCKSOURCE_MASK(32),
++ .shift = 18,
++ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
++};
+
-+ if (data->stop && !mci_set_stop_sent_is_completed(host))
-+ send_stop_cmd(host->mmc, data, 0);
++#ifdef CONFIG_GENERIC_CLOCKEVENTS
+
-+ /*
-+ * Regardless of what the documentation says, we have to wait
-+ * for NOTBUSY even after block read operations.
-+ *
-+ * When the DMA transfer is complete, the controller may still
-+ * be reading the CRC from the card, i.e. the data transfer is
-+ * still in progress and we haven't seen all the potential
-+ * error bits yet.
-+ */
-+ mci_writel(host, IER, MCI_BIT(NOTBUSY));
++struct tc_clkevt_device {
++ struct clock_event_device clkevt;
++ struct clk *clk;
++ void __iomem *regs;
++};
++
++static struct tc_clkevt_device *to_tc_clkevt(struct clock_event_device *clkevt)
++{
++ return container_of(clkevt, struct tc_clkevt_device, clkevt);
+}
+
-+static void atmci_dma_error(struct dma_request *_req)
++/* For now, we always use the 32K clock ... this optimizes for NO_HZ,
++ * because using one of the divided clocks would usually mean the
++ * tick rate can never be less than several dozen Hz (vs 0.5 Hz).
++ *
++ * A divided clock could be good for high resolution timers, since
++ * 30.5 usec resolution can seem "low".
++ */
++static u32 timer_clock;
++
++static void tc_mode(enum clock_event_mode m, struct clock_event_device *d)
+{
-+ struct dma_request_sg *req = to_dma_request_sg(_req);
-+ struct atmel_mci_dma *dma;
-+ struct atmel_mci *host;
++ struct tc_clkevt_device *tcd = to_tc_clkevt(d);
++ void __iomem *regs = tcd->regs;
+
-+ dma = container_of(req, struct atmel_mci_dma, req);
-+ host = container_of(dma, struct atmel_mci, dma);
++ if (tcd->clkevt.mode == CLOCK_EVT_MODE_PERIODIC
++ || tcd->clkevt.mode == CLOCK_EVT_MODE_ONESHOT) {
++ __raw_writel(0xff, regs + ATMEL_TC_REG(2, IDR));
++ __raw_writel(ATMEL_TC_CLKDIS, regs + ATMEL_TC_REG(2, CCR));
++ clk_disable(tcd->clk);
++ }
+
-+ mci_writel(host, IDR, (MCI_BIT(NOTBUSY)
-+ | MCI_DATA_ERROR_FLAGS));
++ switch (m) {
+
-+ mci_set_dma_error_pending(host);
-+ tasklet_schedule(&host->tasklet);
-+}
++ /* By not making the gentime core emulate periodic mode on top
++ * of oneshot, we get lower overhead and improved accuracy.
++ */
++ case CLOCK_EVT_MODE_PERIODIC:
++ clk_enable(tcd->clk);
+
-+static irqreturn_t atmci_interrupt(int irq, void *dev_id)
-+{
-+ struct mmc_host *mmc = dev_id;
-+ struct atmel_mci *host = mmc_priv(mmc);
-+ u32 status, mask, pending;
++ /* slow clock, count up to RC, then irq and restart */
++ __raw_writel(timer_clock
++ | ATMEL_TC_WAVE | ATMEL_TC_WAVESEL_UP_AUTO,
++ regs + ATMEL_TC_REG(2, CMR));
++ __raw_writel((32768 + HZ/2) / HZ, tcaddr + ATMEL_TC_REG(2, RC));
+
-+ spin_lock(&mmc->lock);
++ /* Enable clock and interrupts on RC compare */
++ __raw_writel(ATMEL_TC_CPCS, regs + ATMEL_TC_REG(2, IER));
+
-+ status = mci_readl(host, SR);
-+ mask = mci_readl(host, IMR);
-+ pending = status & mask;
++ /* go go gadget! */
++ __raw_writel(ATMEL_TC_CLKEN | ATMEL_TC_SWTRG,
++ regs + ATMEL_TC_REG(2, CCR));
++ break;
+
-+ do {
-+ if (pending & MCI_DATA_ERROR_FLAGS) {
-+ mci_writel(host, IDR, (MCI_BIT(NOTBUSY)
-+ | MCI_DATA_ERROR_FLAGS));
-+ host->data_status = status;
-+ mci_set_data_error_pending(host);
-+ tasklet_schedule(&host->tasklet);
-+ break;
-+ }
-+ if (pending & MCI_BIT(CMDRDY))
-+ atmci_cmd_interrupt(mmc, status);
-+ if (pending & MCI_BIT(NOTBUSY)) {
-+ mci_writel(host, IDR, (MCI_BIT(NOTBUSY)
-+ | MCI_DATA_ERROR_FLAGS));
-+ mci_set_data_pending(host);
-+ tasklet_schedule(&host->tasklet);
-+ }
++ case CLOCK_EVT_MODE_ONESHOT:
++ clk_enable(tcd->clk);
+
-+ status = mci_readl(host, SR);
-+ mask = mci_readl(host, IMR);
-+ pending = status & mask;
-+ } while (pending);
++ /* slow clock, count up to RC, then irq and stop */
++ __raw_writel(timer_clock | ATMEL_TC_CPCSTOP
++ | ATMEL_TC_WAVE | ATMEL_TC_WAVESEL_UP_AUTO,
++ regs + ATMEL_TC_REG(2, CMR));
++ __raw_writel(ATMEL_TC_CPCS, regs + ATMEL_TC_REG(2, IER));
+
-+ spin_unlock(&mmc->lock);
++ /* set_next_event() configures and starts the timer */
++ break;
+
-+ return IRQ_HANDLED;
++ default:
++ break;
++ }
+}
+
-+static irqreturn_t atmci_detect_change(int irq, void *dev_id)
++static int tc_next_event(unsigned long delta, struct clock_event_device *d)
+{
-+ struct mmc_host *mmc = dev_id;
-+ struct atmel_mci *host = mmc_priv(mmc);
++ __raw_writel(delta, tcaddr + ATMEL_TC_REG(2, RC));
+
-+ int present = !gpio_get_value(irq_to_gpio(irq));
++ /* go go gadget! */
++ __raw_writel(ATMEL_TC_CLKEN | ATMEL_TC_SWTRG,
++ tcaddr + ATMEL_TC_REG(2, CCR));
++ return 0;
++}
+
-+ if (present != host->present) {
-+ dev_dbg(&mmc->class_dev, "card %s\n",
-+ present ? "inserted" : "removed");
-+ host->present = present;
-+ mci_set_card_detect_pending(host);
-+ tasklet_schedule(&host->tasklet);
++static struct tc_clkevt_device clkevt = {
++ .clkevt = {
++ .name = "tc_clkevt",
++ .features = CLOCK_EVT_FEAT_PERIODIC
++ | CLOCK_EVT_FEAT_ONESHOT,
++ .shift = 32,
++ /* Should be lower than at91rm9200's system timer */
++ .rating = 125,
++ .cpumask = CPU_MASK_CPU0,
++ .set_next_event = tc_next_event,
++ .set_mode = tc_mode,
++ },
++};
++
++static irqreturn_t ch2_irq(int irq, void *handle)
++{
++ struct tc_clkevt_device *dev = handle;
++ unsigned int sr;
++
++ sr = __raw_readl(dev->regs + ATMEL_TC_REG(2, SR));
++ if (sr & ATMEL_TC_CPCS) {
++ dev->clkevt.event_handler(&dev->clkevt);
++ return IRQ_HANDLED;
+ }
-+ return IRQ_HANDLED;
++
++ return IRQ_NONE;
+}
+
-+static int __devinit atmci_probe(struct platform_device *pdev)
-+{
-+ struct mci_platform_data *board;
-+ struct atmel_mci *host;
-+ struct mmc_host *mmc;
-+ struct resource *regs;
-+ int irq;
-+ int ret;
++static struct irqaction tc_irqaction = {
++ .name = "tc_clkevt",
++ .flags = IRQF_TIMER | IRQF_DISABLED,
++ .handler = ch2_irq,
++};
+
-+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!regs)
-+ return -ENXIO;
-+ irq = platform_get_irq(pdev, 0);
-+ if (irq < 0)
-+ return irq;
++static void __init setup_clkevents(struct atmel_tc *tc, int clk32k_divisor_idx)
++{
++ struct clk *t2_clk = tc->clk[2];
++ int irq = tc->irq[2];
+
-+ board = pdev->dev.platform_data;
++ clkevt.regs = tc->regs;
++ clkevt.clk = t2_clk;
++ tc_irqaction.dev_id = &clkevt;
+
-+ mmc = mmc_alloc_host(sizeof(struct atmel_mci), &pdev->dev);
-+ if (!mmc)
-+ return -ENOMEM;
++ timer_clock = clk32k_divisor_idx;
+
-+ host = mmc_priv(mmc);
-+ host->pdev = pdev;
-+ host->mmc = mmc;
-+ if (board) {
-+ host->detect_pin = board->detect_pin;
-+ host->wp_pin = board->wp_pin;
-+ } else {
-+ host->detect_pin = -1;
-+ host->detect_pin = -1;
-+ }
++ clkevt.clkevt.mult = div_sc(32768, NSEC_PER_SEC, clkevt.clkevt.shift);
++ clkevt.clkevt.max_delta_ns
++ = clockevent_delta2ns(0xffff, &clkevt.clkevt);
++ clkevt.clkevt.min_delta_ns = clockevent_delta2ns(1, &clkevt.clkevt) + 1;
+
-+ host->mck = clk_get(&pdev->dev, "mci_clk");
-+ if (IS_ERR(host->mck)) {
-+ ret = PTR_ERR(host->mck);
-+ goto out_free_host;
-+ }
-+ clk_enable(host->mck);
++ setup_irq(irq, &tc_irqaction);
+
-+ ret = -ENOMEM;
-+ host->regs = ioremap(regs->start, regs->end - regs->start + 1);
-+ if (!host->regs)
-+ goto out_disable_clk;
++ clockevents_register_device(&clkevt.clkevt);
++}
+
-+ host->bus_hz = clk_get_rate(host->mck);
-+ host->mapbase = regs->start;
++#else /* !CONFIG_GENERIC_CLOCKEVENTS */
+
-+ mmc->ops = &atmci_ops;
-+ mmc->f_min = (host->bus_hz + 511) / 512;
-+ mmc->f_max = min((unsigned int)(host->bus_hz / 2), fmax);
-+ mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
-+ mmc->caps |= MMC_CAP_4_BIT_DATA;
++static void __init setup_clkevents(struct atmel_tc *tc, int clk32k_divisor_idx)
++{
++ /* NOTHING */
++}
+
-+ tasklet_init(&host->tasklet, atmci_tasklet_func, (unsigned long)mmc);
++#endif
+
-+ ret = request_irq(irq, atmci_interrupt, 0, "mmci", mmc);
-+ if (ret)
-+ goto out_unmap;
++static int __init tcb_clksrc_init(void)
++{
++ static char bootinfo[] __initdata
++ = KERN_DEBUG "%s: tc%d at %d.%03d MHz\n";
+
-+ /* Assume card is present if we don't have a detect pin */
-+ host->present = 1;
-+ if (host->detect_pin >= 0) {
-+ if (gpio_request(host->detect_pin, "mmc_detect")) {
-+ dev_dbg(&mmc->class_dev, "no detect pin available\n");
-+ host->detect_pin = -1;
-+ } else {
-+ host->present = !gpio_get_value(host->detect_pin);
-+ }
-+ }
-+ if (host->wp_pin >= 0) {
-+ if (gpio_request(host->wp_pin, "mmc_wp")) {
-+ dev_dbg(&mmc->class_dev, "no WP pin available\n");
-+ host->wp_pin = -1;
-+ }
-+ }
++ struct platform_device *pdev;
++ struct atmel_tc *tc;
++ struct clk *t0_clk;
++ u32 rate, divided_rate = 0;
++ int best_divisor_idx = -1;
++ int clk32k_divisor_idx = -1;
++ int i;
+
-+ /* TODO: Get this information from platform data */
-+ ret = -ENOMEM;
-+ host->dma.req.req.dmac = find_dma_controller(0);
-+ if (!host->dma.req.req.dmac) {
-+ dev_dbg(&mmc->class_dev, "no DMA controller available\n");
-+ goto out_free_irq;
-+ }
-+ ret = dma_alloc_channel(host->dma.req.req.dmac);
-+ if (ret < 0) {
-+ dev_dbg(&mmc->class_dev, "unable to allocate DMA channel\n");
-+ goto out_free_irq;
++ tc = atmel_tc_alloc(CONFIG_ATMEL_TCB_CLKSRC_BLOCK, clksrc.name);
++ if (!tc) {
++ pr_debug("can't alloc TC for clocksource\n");
++ return -ENODEV;
+ }
-+ host->dma.req.req.channel = ret;
-+ host->dma.req.width = DMA_WIDTH_32BIT;
-+ host->dma.req.req.xfer_complete = atmci_xfer_complete;
-+ host->dma.req.req.block_complete = NULL; // atmci_block_complete;
-+ host->dma.req.req.error = atmci_dma_error;
-+ host->dma.rx_periph_id = 0;
-+ host->dma.tx_periph_id = 1;
++ tcaddr = tc->regs;
++ pdev = tc->pdev;
+
-+ mci_writel(host, CR, MCI_BIT(SWRST));
-+ mci_writel(host, IDR, ~0UL);
++ t0_clk = tc->clk[0];
++ clk_enable(t0_clk);
+
-+ platform_set_drvdata(pdev, host);
++ /* How fast will we be counting? Pick something over 5 MHz. */
++ rate = (u32) clk_get_rate(t0_clk);
++ for (i = 0; i < 5; i++) {
++ unsigned divisor = atmel_tc_divisors[i];
++ unsigned tmp;
+
-+ mmc_add_host(mmc);
++ /* remember 32 KiHz clock for later */
++ if (!divisor) {
++ clk32k_divisor_idx = i;
++ continue;
++ }
+
-+ if (host->detect_pin >= 0) {
-+ ret = request_irq(gpio_to_irq(host->detect_pin),
-+ atmci_detect_change,
-+ IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
-+ DRIVER_NAME, mmc);
-+ if (ret) {
-+ dev_dbg(&mmc->class_dev,
-+ "could not request IRQ %d for detect pin\n",
-+ gpio_to_irq(host->detect_pin));
-+ gpio_free(host->detect_pin);
-+ host->detect_pin = -1;
++ tmp = rate / divisor;
++ pr_debug("TC: %u / %-3u [%d] --> %u\n", rate, divisor, i, tmp);
++ if (best_divisor_idx > 0) {
++ if (tmp < 5 * 1000 * 1000)
++ continue;
+ }
++ divided_rate = tmp;
++ best_divisor_idx = i;
+ }
+
-+ dev_info(&mmc->class_dev, "Atmel MCI controller at 0x%08lx irq %d\n",
-+ host->mapbase, irq);
++ clksrc.mult = clocksource_hz2mult(divided_rate, clksrc.shift);
+
-+ atmci_init_debugfs(host);
++ printk(bootinfo, clksrc.name, CONFIG_ATMEL_TCB_CLKSRC_BLOCK,
++ divided_rate / 1000000,
++ ((divided_rate + 500000) % 1000000) / 1000);
+
-+ return 0;
++ /* tclib will give us three clocks no matter what the
++ * underlying platform supports.
++ */
++ clk_enable(tc->clk[1]);
++
++ /* channel 0: waveform mode, input mclk/8, clock TIOA0 on overflow */
++ __raw_writel(best_divisor_idx /* likely divide-by-8 */
++ | ATMEL_TC_WAVE
++ | ATMEL_TC_WAVESEL_UP /* free-run */
++ | ATMEL_TC_ACPA_SET /* TIOA0 rises at 0 */
++ | ATMEL_TC_ACPC_CLEAR, /* (duty cycle 50%) */
++ tcaddr + ATMEL_TC_REG(0, CMR));
++ __raw_writel(0x0000, tcaddr + ATMEL_TC_REG(0, RA));
++ __raw_writel(0x8000, tcaddr + ATMEL_TC_REG(0, RC));
++ __raw_writel(0xff, tcaddr + ATMEL_TC_REG(0, IDR)); /* no irqs */
++ __raw_writel(ATMEL_TC_CLKEN, tcaddr + ATMEL_TC_REG(0, CCR));
++
++ /* channel 1: waveform mode, input TIOA0 */
++ __raw_writel(ATMEL_TC_XC1 /* input: TIOA0 */
++ | ATMEL_TC_WAVE
++ | ATMEL_TC_WAVESEL_UP, /* free-run */
++ tcaddr + ATMEL_TC_REG(1, CMR));
++ __raw_writel(0xff, tcaddr + ATMEL_TC_REG(1, IDR)); /* no irqs */
++ __raw_writel(ATMEL_TC_CLKEN, tcaddr + ATMEL_TC_REG(1, CCR));
++
++ /* chain channel 0 to channel 1, then reset all the timers */
++ __raw_writel(ATMEL_TC_TC1XC1S_TIOA0, tcaddr + ATMEL_TC_BMR);
++ __raw_writel(ATMEL_TC_SYNC, tcaddr + ATMEL_TC_BCR);
++
++ /* and away we go! */
++ clocksource_register(&clksrc);
++
++ /* channel 2: periodic and oneshot timer support */
++ setup_clkevents(tc, clk32k_divisor_idx);
+
-+out_free_irq:
-+ if (host->detect_pin >= 0)
-+ gpio_free(host->detect_pin);
-+ if (host->wp_pin >= 0)
-+ gpio_free(host->wp_pin);
-+ free_irq(irq, mmc);
-+out_unmap:
-+ iounmap(host->regs);
-+out_disable_clk:
-+ clk_disable(host->mck);
-+ clk_put(host->mck);
-+out_free_host:
-+ mmc_free_host(mmc);
-+ return ret;
++ return 0;
+}
++arch_initcall(tcb_clksrc_init);
+--- a/drivers/i2c/busses/Kconfig
++++ b/drivers/i2c/busses/Kconfig
+@@ -88,6 +88,14 @@ config I2C_AT91
+ to support combined I2C messages. Use the i2c-gpio driver
+ unless your system can cope with those limitations.
+
++config I2C_ATMELTWI
++ tristate "Atmel Two-Wire Interface (TWI)"
++ depends on I2C && (ARCH_AT91 || PLATFORM_AT32AP)
++ help
++ Atmel on-chip TWI controller. Say Y if you have an AT32 or
++ AT91-based device and want to use its built-in TWI
++ functionality.
++
+ config I2C_AU1550
+ tristate "Au1550/Au1200 SMBus interface"
+ depends on SOC_AU1550 || SOC_AU1200
+--- a/drivers/i2c/busses/Makefile
++++ b/drivers/i2c/busses/Makefile
+@@ -52,6 +52,7 @@ obj-$(CONFIG_I2C_VIAPRO) += i2c-viapro.o
+ obj-$(CONFIG_I2C_VOODOO3) += i2c-voodoo3.o
+ obj-$(CONFIG_SCx200_ACB) += scx200_acb.o
+ obj-$(CONFIG_SCx200_I2C) += scx200_i2c.o
++obj-$(CONFIG_I2C_ATMELTWI) += i2c-atmeltwi.o
+
+ ifeq ($(CONFIG_I2C_DEBUG_BUS),y)
+ EXTRA_CFLAGS += -DDEBUG
+--- /dev/null
++++ b/drivers/i2c/busses/i2c-atmeltwi.c
+@@ -0,0 +1,436 @@
++/*
++ * i2c Support for Atmel's Two-Wire Interface (TWI)
++ *
++ * Based on the work of Copyright (C) 2004 Rick Bronson
++ * Converted to 2.6 by Andrew Victor <andrew at sanpeople.com>
++ * Ported to AVR32 and heavily modified by Espen Krangnes
++ * <ekrangnes at atmel.com>
++ *
++ * Copyright (C) 2006 Atmel Corporation
++ *
++ * Borrowed heavily from the original work by:
++ * Copyright (C) 2000 Philip Edelbrock <phil at stimpy.netroedge.com>
++ *
++ * Partialy rewriten by Karel Hojdar <cmkaho at seznam.cz>
++ * bugs removed, interrupt routine markedly rewritten
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++#undef VERBOSE_DEBUG
+
-+static int __devexit atmci_remove(struct platform_device *pdev)
-+{
-+ struct atmel_mci *host = platform_get_drvdata(pdev);
++#include <linux/module.h>
++#include <linux/slab.h>
++#include <linux/i2c.h>
++#include <linux/init.h>
++#include <linux/clk.h>
++#include <linux/err.h>
++#include <linux/interrupt.h>
++#include <linux/platform_device.h>
++#include <linux/completion.h>
++#include <linux/io.h>
+
-+ platform_set_drvdata(pdev, NULL);
++#include "i2c-atmeltwi.h"
+
-+ if (host) {
-+ atmci_cleanup_debugfs(host);
++static unsigned int baudrate = 100 * 1000;
++module_param(baudrate, uint, S_IRUGO);
++MODULE_PARM_DESC(baudrate, "The TWI baudrate");
+
-+ if (host->detect_pin >= 0) {
-+ free_irq(gpio_to_irq(host->detect_pin), host->mmc);
-+ cancel_delayed_work(&host->mmc->detect);
-+ gpio_free(host->detect_pin);
-+ }
+
-+ mmc_remove_host(host->mmc);
++struct atmel_twi {
++ void __iomem *regs;
++ struct i2c_adapter adapter;
++ struct clk *pclk;
++ struct completion comp;
++ u32 mask;
++ u8 *buf;
++ u16 len;
++ u16 acks_left;
++ int status;
++ unsigned int irq;
+
-+ mci_writel(host, IDR, ~0UL);
-+ mci_writel(host, CR, MCI_BIT(MCIDIS));
-+ mci_readl(host, SR);
++};
++#define to_atmel_twi(adap) container_of(adap, struct atmel_twi, adapter)
+
-+ dma_release_channel(host->dma.req.req.dmac,
-+ host->dma.req.req.channel);
++/*
++ * (Re)Initialize the TWI hardware registers.
++ */
++static int twi_hwinit(struct atmel_twi *twi)
++{
++ unsigned long cdiv, ckdiv = 0;
+
-+ if (host->wp_pin >= 0)
-+ gpio_free(host->wp_pin);
++ /* REVISIT: wait till SCL is high before resetting; otherwise,
++ * some versions will wedge forever.
++ */
+
-+ free_irq(platform_get_irq(pdev, 0), host->mmc);
-+ iounmap(host->regs);
++ twi_writel(twi, IDR, ~0UL);
++ twi_writel(twi, CR, TWI_BIT(SWRST)); /*Reset peripheral*/
++ twi_readl(twi, SR);
+
-+ clk_disable(host->mck);
-+ clk_put(host->mck);
++ cdiv = (clk_get_rate(twi->pclk) / (2 * baudrate)) - 4;
+
-+ mmc_free_host(host->mmc);
++ while (cdiv > 255) {
++ ckdiv++;
++ cdiv = cdiv >> 1;
+ }
-+ return 0;
-+}
-+
-+static struct platform_driver atmci_driver = {
-+ .probe = atmci_probe,
-+ .remove = __devexit_p(atmci_remove),
-+ .driver = {
-+ .name = DRIVER_NAME,
-+ },
-+};
+
-+static int __init atmci_init(void)
-+{
-+ return platform_driver_register(&atmci_driver);
-+}
++ /* REVISIT: there are various errata to consider re CDIV and CHDIV
++ * here, at least on at91 parts.
++ */
+
-+static void __exit atmci_exit(void)
-+{
-+ platform_driver_unregister(&atmci_driver);
++ if (ckdiv > 7)
++ return -EINVAL;
++ else
++ twi_writel(twi, CWGR, TWI_BF(CKDIV, ckdiv)
++ | TWI_BF(CHDIV, cdiv)
++ | TWI_BF(CLDIV, cdiv));
++ return 0;
+}
+
-+module_init(atmci_init);
-+module_exit(atmci_exit);
-+
-+MODULE_DESCRIPTION("Atmel Multimedia Card Interface driver");
-+MODULE_LICENSE("GPL");
-diff --git a/drivers/mmc/host/atmel-mci.h b/drivers/mmc/host/atmel-mci.h
-new file mode 100644
-index 0000000..60d15c4
---- /dev/null
-+++ b/drivers/mmc/host/atmel-mci.h
-@@ -0,0 +1,192 @@
+/*
-+ * Atmel MultiMedia Card Interface driver
-+ *
-+ * Copyright (C) 2004-2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
++ * Waits for the i2c status register to set the specified bitmask
++ * Returns 0 if timed out ... ~100ms is much longer than the SMBus
++ * limit, but I2C has no limit at all.
+ */
-+#ifndef __DRIVERS_MMC_ATMEL_MCI_H__
-+#define __DRIVERS_MMC_ATMEL_MCI_H__
-+
-+/* MCI register offsets */
-+#define MCI_CR 0x0000
-+#define MCI_MR 0x0004
-+#define MCI_DTOR 0x0008
-+#define MCI_SDCR 0x000c
-+#define MCI_ARGR 0x0010
-+#define MCI_CMDR 0x0014
-+#define MCI_BLKR 0x0018
-+#define MCI_RSPR 0x0020
-+#define MCI_RSPR1 0x0024
-+#define MCI_RSPR2 0x0028
-+#define MCI_RSPR3 0x002c
-+#define MCI_RDR 0x0030
-+#define MCI_TDR 0x0034
-+#define MCI_SR 0x0040
-+#define MCI_IER 0x0044
-+#define MCI_IDR 0x0048
-+#define MCI_IMR 0x004c
-+
-+/* Bitfields in CR */
-+#define MCI_MCIEN_OFFSET 0
-+#define MCI_MCIEN_SIZE 1
-+#define MCI_MCIDIS_OFFSET 1
-+#define MCI_MCIDIS_SIZE 1
-+#define MCI_PWSEN_OFFSET 2
-+#define MCI_PWSEN_SIZE 1
-+#define MCI_PWSDIS_OFFSET 3
-+#define MCI_PWSDIS_SIZE 1
-+#define MCI_SWRST_OFFSET 7
-+#define MCI_SWRST_SIZE 1
-+
-+/* Bitfields in MR */
-+#define MCI_CLKDIV_OFFSET 0
-+#define MCI_CLKDIV_SIZE 8
-+#define MCI_PWSDIV_OFFSET 8
-+#define MCI_PWSDIV_SIZE 3
-+#define MCI_RDPROOF_OFFSET 11
-+#define MCI_RDPROOF_SIZE 1
-+#define MCI_WRPROOF_OFFSET 12
-+#define MCI_WRPROOF_SIZE 1
-+#define MCI_DMAPADV_OFFSET 14
-+#define MCI_DMAPADV_SIZE 1
-+#define MCI_BLKLEN_OFFSET 16
-+#define MCI_BLKLEN_SIZE 16
-+
-+/* Bitfields in DTOR */
-+#define MCI_DTOCYC_OFFSET 0
-+#define MCI_DTOCYC_SIZE 4
-+#define MCI_DTOMUL_OFFSET 4
-+#define MCI_DTOMUL_SIZE 3
++static int twi_complete(struct atmel_twi *twi, u32 mask)
++{
++ int timeout = msecs_to_jiffies(100);
+
-+/* Bitfields in SDCR */
-+#define MCI_SDCSEL_OFFSET 0
-+#define MCI_SDCSEL_SIZE 4
-+#define MCI_SDCBUS_OFFSET 7
-+#define MCI_SDCBUS_SIZE 1
++ mask |= TWI_BIT(TXCOMP);
++ twi->mask = mask | TWI_BIT(NACK) | TWI_BIT(OVRE);
++ init_completion(&twi->comp);
+
-+/* Bitfields in ARGR */
-+#define MCI_ARG_OFFSET 0
-+#define MCI_ARG_SIZE 32
++ twi_writel(twi, IER, mask);
+
-+/* Bitfields in CMDR */
-+#define MCI_CMDNB_OFFSET 0
-+#define MCI_CMDNB_SIZE 6
-+#define MCI_RSPTYP_OFFSET 6
-+#define MCI_RSPTYP_SIZE 2
-+#define MCI_SPCMD_OFFSET 8
-+#define MCI_SPCMD_SIZE 3
-+#define MCI_OPDCMD_OFFSET 11
-+#define MCI_OPDCMD_SIZE 1
-+#define MCI_MAXLAT_OFFSET 12
-+#define MCI_MAXLAT_SIZE 1
-+#define MCI_TRCMD_OFFSET 16
-+#define MCI_TRCMD_SIZE 2
-+#define MCI_TRDIR_OFFSET 18
-+#define MCI_TRDIR_SIZE 1
-+#define MCI_TRTYP_OFFSET 19
-+#define MCI_TRTYP_SIZE 2
++ if (!wait_for_completion_timeout(&twi->comp, timeout)) {
++ /* RESET TWI interface */
++ twi_writel(twi, CR, TWI_BIT(SWRST));
+
-+/* Bitfields in BLKR */
-+#define MCI_BCNT_OFFSET 0
-+#define MCI_BCNT_SIZE 16
++ /* Reinitialize TWI */
++ twi_hwinit(twi);
+
-+/* Bitfields in RSPRn */
-+#define MCI_RSP_OFFSET 0
-+#define MCI_RSP_SIZE 32
++ return -ETIMEDOUT;
++ }
++ return 0;
++}
+
-+/* Bitfields in SR/IER/IDR/IMR */
-+#define MCI_CMDRDY_OFFSET 0
-+#define MCI_CMDRDY_SIZE 1
-+#define MCI_RXRDY_OFFSET 1
-+#define MCI_RXRDY_SIZE 1
-+#define MCI_TXRDY_OFFSET 2
-+#define MCI_TXRDY_SIZE 1
-+#define MCI_BLKE_OFFSET 3
-+#define MCI_BLKE_SIZE 1
-+#define MCI_DTIP_OFFSET 4
-+#define MCI_DTIP_SIZE 1
-+#define MCI_NOTBUSY_OFFSET 5
-+#define MCI_NOTBUSY_SIZE 1
-+#define MCI_ENDRX_OFFSET 6
-+#define MCI_ENDRX_SIZE 1
-+#define MCI_ENDTX_OFFSET 7
-+#define MCI_ENDTX_SIZE 1
-+#define MCI_RXBUFF_OFFSET 14
-+#define MCI_RXBUFF_SIZE 1
-+#define MCI_TXBUFE_OFFSET 15
-+#define MCI_TXBUFE_SIZE 1
-+#define MCI_RINDE_OFFSET 16
-+#define MCI_RINDE_SIZE 1
-+#define MCI_RDIRE_OFFSET 17
-+#define MCI_RDIRE_SIZE 1
-+#define MCI_RCRCE_OFFSET 18
-+#define MCI_RCRCE_SIZE 1
-+#define MCI_RENDE_OFFSET 19
-+#define MCI_RENDE_SIZE 1
-+#define MCI_RTOE_OFFSET 20
-+#define MCI_RTOE_SIZE 1
-+#define MCI_DCRCE_OFFSET 21
-+#define MCI_DCRCE_SIZE 1
-+#define MCI_DTOE_OFFSET 22
-+#define MCI_DTOE_SIZE 1
-+#define MCI_OVRE_OFFSET 30
-+#define MCI_OVRE_SIZE 1
-+#define MCI_UNRE_OFFSET 31
-+#define MCI_UNRE_SIZE 1
++/*
++ * Generic i2c master transfer entrypoint.
++ */
++static int twi_xfer(struct i2c_adapter *adap, struct i2c_msg *pmsg, int num)
++{
++ struct atmel_twi *twi = to_atmel_twi(adap);
++ int i;
+
-+/* Constants for DTOMUL */
-+#define MCI_DTOMUL_1_CYCLE 0
-+#define MCI_DTOMUL_16_CYCLES 1
-+#define MCI_DTOMUL_128_CYCLES 2
-+#define MCI_DTOMUL_256_CYCLES 3
-+#define MCI_DTOMUL_1024_CYCLES 4
-+#define MCI_DTOMUL_4096_CYCLES 5
-+#define MCI_DTOMUL_65536_CYCLES 6
-+#define MCI_DTOMUL_1048576_CYCLES 7
++ dev_dbg(&adap->dev, "twi_xfer: processing %d messages:\n", num);
+
-+/* Constants for RSPTYP */
-+#define MCI_RSPTYP_NO_RESP 0
-+#define MCI_RSPTYP_48_BIT 1
-+#define MCI_RSPTYP_136_BIT 2
++ twi->status = 0;
++ for (i = 0; i < num; i++, pmsg++) {
++ twi->len = pmsg->len;
++ twi->buf = pmsg->buf;
++ twi->acks_left = pmsg->len;
++ twi_writel(twi, MMR, TWI_BF(DADR, pmsg->addr) |
++ (pmsg->flags & I2C_M_RD ? TWI_BIT(MREAD) : 0));
++ twi_writel(twi, IADR, TWI_BF(IADR, pmsg->addr));
+
-+/* Constants for SPCMD */
-+#define MCI_SPCMD_NO_SPEC_CMD 0
-+#define MCI_SPCMD_INIT_CMD 1
-+#define MCI_SPCMD_SYNC_CMD 2
-+#define MCI_SPCMD_INT_CMD 4
-+#define MCI_SPCMD_INT_RESP 5
++ dev_dbg(&adap->dev,
++ "#%d: %s %d byte%s %s dev 0x%02x\n",
++ i,
++ pmsg->flags & I2C_M_RD ? "reading" : "writing",
++ pmsg->len,
++ pmsg->len > 1 ? "s" : "",
++ pmsg->flags & I2C_M_RD ? "from" : "to", pmsg->addr);
+
-+/* Constants for TRCMD */
-+#define MCI_TRCMD_NO_TRANS 0
-+#define MCI_TRCMD_START_TRANS 1
-+#define MCI_TRCMD_STOP_TRANS 2
++ /* enable */
++ twi_writel(twi, CR, TWI_BIT(MSEN));
+
-+/* Constants for TRTYP */
-+#define MCI_TRTYP_BLOCK 0
-+#define MCI_TRTYP_MULTI_BLOCK 1
-+#define MCI_TRTYP_STREAM 2
++ if (pmsg->flags & I2C_M_RD) {
++ /* cleanup after previous RX overruns */
++ while (twi_readl(twi, SR) & TWI_BIT(RXRDY))
++ twi_readl(twi, RHR);
+
-+/* Bit manipulation macros */
-+#define MCI_BIT(name) \
-+ (1 << MCI_##name##_OFFSET)
-+#define MCI_BF(name,value) \
-+ (((value) & ((1 << MCI_##name##_SIZE) - 1)) \
-+ << MCI_##name##_OFFSET)
-+#define MCI_BFEXT(name,value) \
-+ (((value) >> MCI_##name##_OFFSET) \
-+ & ((1 << MCI_##name##_SIZE) - 1))
-+#define MCI_BFINS(name,value,old) \
-+ (((old) & ~(((1 << MCI_##name##_SIZE) - 1) \
-+ << MCI_##name##_OFFSET)) \
-+ | MCI_BF(name,value))
++ if (twi->len == 1)
++ twi_writel(twi, CR,
++ TWI_BIT(START) | TWI_BIT(STOP));
++ else
++ twi_writel(twi, CR, TWI_BIT(START));
+
-+/* Register access macros */
-+#define mci_readl(port,reg) \
-+ __raw_readl((port)->regs + MCI_##reg)
-+#define mci_writel(port,reg,value) \
-+ __raw_writel((value), (port)->regs + MCI_##reg)
++ if (twi_complete(twi, TWI_BIT(RXRDY)) == -ETIMEDOUT) {
++ dev_dbg(&adap->dev, "RX[%d] timeout. "
++ "Stopped with %d bytes left\n",
++ i, twi->acks_left);
++ return -ETIMEDOUT;
++ }
++ } else {
++ twi_writel(twi, THR, twi->buf[0]);
++ twi->acks_left--;
++ /* REVISIT: some chips don't start automagically:
++ * twi_writel(twi, CR, TWI_BIT(START));
++ */
++ if (twi_complete(twi, TWI_BIT(TXRDY)) == -ETIMEDOUT) {
++ dev_dbg(&adap->dev, "TX[%d] timeout. "
++ "Stopped with %d bytes left\n",
++ i, twi->acks_left);
++ return -ETIMEDOUT;
++ }
++ /* REVISIT: an erratum workaround may be needed here;
++ * see sam9261 "STOP not generated" (START either).
++ */
++ }
+
-+#endif /* __DRIVERS_MMC_ATMEL_MCI_H__ */
-diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c
-index 2f19fa7..94304ca 100644
---- a/drivers/mtd/chips/cfi_cmdset_0001.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0001.c
-@@ -50,6 +50,7 @@
- #define I82802AC 0x00ac
- #define MANUFACTURER_ST 0x0020
- #define M50LPW080 0x002F
-+#define AT49BV640D 0x02de
-
- static int cfi_intelext_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
- static int cfi_intelext_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
-@@ -156,6 +157,47 @@ static void cfi_tell_features(struct cfi_pri_intelext *extp)
- }
- #endif
-
-+/* Atmel chips don't use the same PRI format as Intel chips */
-+static void fixup_convert_atmel_pri(struct mtd_info *mtd, void *param)
-+{
-+ struct map_info *map = mtd->priv;
-+ struct cfi_private *cfi = map->fldrv_priv;
-+ struct cfi_pri_intelext *extp = cfi->cmdset_priv;
-+ struct cfi_pri_atmel atmel_pri;
-+ uint32_t features = 0;
-+
-+ /* Reverse byteswapping */
-+ extp->FeatureSupport = cpu_to_le32(extp->FeatureSupport);
-+ extp->BlkStatusRegMask = cpu_to_le16(extp->BlkStatusRegMask);
-+ extp->ProtRegAddr = cpu_to_le16(extp->ProtRegAddr);
-+
-+ memcpy(&atmel_pri, extp, sizeof(atmel_pri));
-+ memset((char *)extp + 5, 0, sizeof(*extp) - 5);
-+
-+ printk(KERN_ERR "atmel Features: %02x\n", atmel_pri.Features);
-+
-+ if (atmel_pri.Features & 0x01) /* chip erase supported */
-+ features |= (1<<0);
-+ if (atmel_pri.Features & 0x02) /* erase suspend supported */
-+ features |= (1<<1);
-+ if (atmel_pri.Features & 0x04) /* program suspend supported */
-+ features |= (1<<2);
-+ if (atmel_pri.Features & 0x08) /* simultaneous operations supported */
-+ features |= (1<<9);
-+ if (atmel_pri.Features & 0x20) /* page mode read supported */
-+ features |= (1<<7);
-+ if (atmel_pri.Features & 0x40) /* queued erase supported */
-+ features |= (1<<4);
-+ if (atmel_pri.Features & 0x80) /* Protection bits supported */
-+ features |= (1<<6);
-+
-+ extp->FeatureSupport = features;
-+
-+ /* burst write mode not supported */
-+ cfi->cfiq->BufWriteTimeoutTyp = 0;
-+ cfi->cfiq->BufWriteTimeoutMax = 0;
-+}
-+
- #ifdef CMDSET0001_DISABLE_ERASE_SUSPEND_ON_WRITE
- /* Some Intel Strata Flash prior to FPO revision C has bugs in this area */
- static void fixup_intel_strataflash(struct mtd_info *mtd, void* param)
-@@ -233,6 +275,7 @@ static void fixup_use_powerup_lock(struct mtd_info *mtd, void *param)
- }
-
- static struct cfi_fixup cfi_fixup_table[] = {
-+ { CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
- #ifdef CMDSET0001_DISABLE_ERASE_SUSPEND_ON_WRITE
- { CFI_MFR_ANY, CFI_ID_ANY, fixup_intel_strataflash, NULL },
- #endif
-diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c
-index 1f64458..205977b 100644
---- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -185,6 +185,10 @@ static void fixup_convert_atmel_pri(struct mtd_info *mtd, void *param)
- extp->TopBottom = 2;
- else
- extp->TopBottom = 3;
-+
-+ /* burst write mode not supported */
-+ cfi->cfiq->BufWriteTimeoutTyp = 0;
-+ cfi->cfiq->BufWriteTimeoutMax = 0;
- }
-
- static void fixup_use_secsi(struct mtd_info *mtd, void *param)
-@@ -217,6 +221,7 @@ static void fixup_use_atmel_lock(struct mtd_info *mtd, void *param)
- }
-
- static struct cfi_fixup cfi_fixup_table[] = {
-+ { CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
- #ifdef AMD_BOOTLOC_BUG
- { CFI_MFR_AMD, CFI_ID_ANY, fixup_amd_bootblock, NULL },
- #endif
-@@ -229,7 +234,6 @@ static struct cfi_fixup cfi_fixup_table[] = {
- #if !FORCE_WORD_WRITE
- { CFI_MFR_ANY, CFI_ID_ANY, fixup_use_write_buffers, NULL, },
- #endif
-- { CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
- { 0, 0, NULL, NULL }
- };
- static struct cfi_fixup jedec_fixup_table[] = {
-diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c
-index b046974..bc90604 100644
---- a/drivers/spi/atmel_spi.c
-+++ b/drivers/spi/atmel_spi.c
-@@ -491,8 +491,8 @@ static int atmel_spi_setup(struct spi_device *spi)
- csr |= SPI_BIT(NCPHA);
-
- /* TODO: DLYBS and DLYBCT */
-- csr |= SPI_BF(DLYBS, 10);
-- csr |= SPI_BF(DLYBCT, 10);
-+ csr |= SPI_BF(DLYBS, 0);
-+ csr |= SPI_BF(DLYBCT, 0);
-
- /* chipselect must have been muxed as GPIO (e.g. in board setup) */
- npcs_pin = (unsigned int)spi->controller_data;
-diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
-index 767aed5..f81d08d 100644
---- a/drivers/usb/gadget/Kconfig
-+++ b/drivers/usb/gadget/Kconfig
-@@ -67,6 +67,17 @@ config USB_GADGET_DEBUG_FILES
- driver on a new board. Enable these files by choosing "Y"
- here. If in doubt, or to conserve kernel memory, say "N".
-
-+config USB_GADGET_DEBUG_FS
-+ boolean "Debugging information files in debugfs"
-+ depends on USB_GADGET && DEBUG_FS
-+ help
-+ Some of the drivers in the "gadget" framework can expose
-+ debugging information in files under /sys/kernel/debug/.
-+ The information in these files may help when you're
-+ troubleshooting or bringing up a driver on a new board.
-+ Enable these files by choosing "Y" here. If in doubt, or
-+ to conserve kernel memory, say "N".
-+
- config USB_GADGET_SELECTED
- boolean
-
-@@ -103,6 +114,20 @@ config USB_AMD5536UDC
- default USB_GADGET
- select USB_GADGET_SELECTED
-
-+config USB_GADGET_ATMEL_USBA
-+ boolean "Atmel USBA"
-+ select USB_GADGET_DUALSPEED
-+ depends on AVR32
-+ help
-+ USBA is the integrated high-speed USB Device controller on
-+ the AT32AP700x processors from Atmel.
-+
-+config USB_ATMEL_USBA
-+ tristate
-+ depends on USB_GADGET_ATMEL_USBA
-+ default USB_GADGET
-+ select USB_GADGET_SELECTED
-+
- config USB_GADGET_FSL_USB2
- boolean "Freescale Highspeed USB DR Peripheral Controller"
- depends on MPC834x || PPC_MPC831x
-@@ -228,7 +253,6 @@ config USB_LH7A40X
- default USB_GADGET
- select USB_GADGET_SELECTED
-
--
- config USB_GADGET_OMAP
- boolean "OMAP USB Device Controller"
- depends on ARCH_OMAP
-diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
-index 1bc0f03..904e57b 100644
---- a/drivers/usb/gadget/Makefile
-+++ b/drivers/usb/gadget/Makefile
-@@ -14,6 +14,7 @@ obj-$(CONFIG_USB_OMAP) += omap_udc.o
- obj-$(CONFIG_USB_LH7A40X) += lh7a40x_udc.o
- obj-$(CONFIG_USB_S3C2410) += s3c2410_udc.o
- obj-$(CONFIG_USB_AT91) += at91_udc.o
-+obj-$(CONFIG_USB_ATMEL_USBA) += atmel_usba_udc.o
- obj-$(CONFIG_USB_FSL_USB2) += fsl_usb2_udc.o
- obj-$(CONFIG_USB_M66592) += m66592-udc.o
-
-diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c
-new file mode 100644
-index 0000000..e35362d
---- /dev/null
-+++ b/drivers/usb/gadget/atmel_usba_udc.c
-@@ -0,0 +1,2038 @@
-+/*
-+ * Driver for the Atmel USBA high speed USB device controller
-+ *
-+ * Copyright (C) 2005-2007 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#include <linux/clk.h>
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/io.h>
-+#include <linux/device.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/list.h>
-+#include <linux/platform_device.h>
-+#include <linux/usb/ch9.h>
-+#include <linux/usb_gadget.h>
-+#include <linux/delay.h>
++ /* Disable TWI interface */
++ twi_writel(twi, CR, TWI_BIT(MSDIS));
+
-+#include <asm/gpio.h>
-+#include <asm/arch/board.h>
++ if (twi->status)
++ return twi->status;
+
-+#include "atmel_usba_udc.h"
++ /* WARNING: This driver lies about properly supporting
++ * repeated start, or it would *ALWAYS* return here. It
++ * has issued a STOP. Continuing is a false claim -- that
++ * a second (or third, etc.) message is part of the same
++ * "combined" (no STOPs between parts) message.
++ */
+
++ } /* end cur msg */
+
-+static struct usba_udc the_udc;
++ return i;
++}
+
-+#ifdef CONFIG_USB_GADGET_DEBUG_FS
-+#include <linux/debugfs.h>
-+#include <linux/uaccess.h>
+
-+static int queue_dbg_open(struct inode *inode, struct file *file)
++static irqreturn_t twi_interrupt(int irq, void *dev_id)
+{
-+ struct usba_ep *ep = inode->i_private;
-+ struct usba_request *req, *req_copy;
-+ struct list_head *queue_data;
++ struct atmel_twi *twi = dev_id;
++ int status = twi_readl(twi, SR);
+
-+ queue_data = kmalloc(sizeof(*queue_data), GFP_KERNEL);
-+ if (!queue_data)
-+ return -ENOMEM;
-+ INIT_LIST_HEAD(queue_data);
++ /* Save state for later debug prints */
++ int old_status = status;
+
-+ spin_lock_irq(&ep->udc->lock);
-+ list_for_each_entry(req, &ep->queue, queue) {
-+ req_copy = kmalloc(sizeof(*req_copy), GFP_ATOMIC);
-+ if (!req_copy)
-+ goto fail;
-+ memcpy(req_copy, req, sizeof(*req_copy));
-+ list_add_tail(&req_copy->queue, queue_data);
++ if (twi->mask & status) {
++
++ status &= twi->mask;
++
++ if (status & TWI_BIT(RXRDY)) {
++ if ((status & TWI_BIT(OVRE)) && twi->acks_left) {
++ /* Note weakness in fault reporting model:
++ * we can't say "the first N of these data
++ * bytes are valid".
++ */
++ dev_err(&twi->adapter.dev,
++ "OVERRUN RX! %04x, lost %d\n",
++ old_status, twi->acks_left);
++ twi->acks_left = 0;
++ twi_writel(twi, CR, TWI_BIT(STOP));
++ twi->status = -EOVERFLOW;
++ } else if (twi->acks_left > 0) {
++ twi->buf[twi->len - twi->acks_left] =
++ twi_readl(twi, RHR);
++ twi->acks_left--;
++ }
++ if (status & TWI_BIT(TXCOMP))
++ goto done;
++ if (twi->acks_left == 1)
++ twi_writel(twi, CR, TWI_BIT(STOP));
++
++ } else if (status & (TWI_BIT(NACK) | TWI_BIT(TXCOMP))) {
++ goto done;
++
++ } else if (status & TWI_BIT(TXRDY)) {
++ if (twi->acks_left > 0) {
++ twi_writel(twi, THR,
++ twi->buf[twi->len - twi->acks_left]);
++ twi->acks_left--;
++ } else
++ twi_writel(twi, CR, TWI_BIT(STOP));
++ }
++
++ if (twi->acks_left == 0)
++ twi_writel(twi, IDR, ~TWI_BIT(TXCOMP));
+ }
-+ spin_unlock_irq(&ep->udc->lock);
+
-+ file->private_data = queue_data;
-+ return 0;
++ /* enabling this message helps trigger overruns/underruns ... */
++ dev_vdbg(&twi->adapter.dev,
++ "ISR: SR 0x%04X, mask 0x%04X, acks %i\n",
++ old_status,
++ twi->acks_left ? twi->mask : TWI_BIT(TXCOMP),
++ twi->acks_left);
+
-+fail:
-+ spin_unlock_irq(&ep->udc->lock);
-+ list_for_each_entry_safe(req, req_copy, queue_data, queue) {
-+ list_del(&req->queue);
-+ kfree(req);
++ return IRQ_HANDLED;
++
++done:
++ /* Note weak fault reporting model: we can't report how many
++ * bytes we sent before the NAK, or let upper layers choose
++ * whether to continue. The I2C stack doesn't allow that...
++ */
++ if (status & TWI_BIT(NACK)) {
++ dev_dbg(&twi->adapter.dev, "NACK received! %d to go\n",
++ twi->acks_left);
++ twi->status = -EPIPE;
++
++ /* TX underrun morphs automagically into a premature STOP;
++ * we'll probably observe UVRE even when it's not documented.
++ */
++ } else if (twi->acks_left && (twi->mask & TWI_BIT(TXRDY))) {
++ dev_err(&twi->adapter.dev, "UNDERRUN TX! %04x, %d to go\n",
++ old_status, twi->acks_left);
++ twi->status = -ENOSR;
+ }
-+ kfree(queue_data);
-+ return -ENOMEM;
++
++ twi_writel(twi, IDR, ~0UL);
++ complete(&twi->comp);
++
++ dev_dbg(&twi->adapter.dev, "ISR: SR 0x%04X, acks %i --> %d\n",
++ old_status, twi->acks_left, twi->status);
++
++ return IRQ_HANDLED;
+}
+
++
++/*
++ * Return list of supported functionality.
++ *
++ * NOTE: see warning above about repeated starts; this driver is falsely
++ * claiming to support "combined" transfers. The mid-message STOPs mean
++ * some slaves will never work with this driver. (Use i2c-gpio...)
++ */
++static u32 twi_func(struct i2c_adapter *adapter)
++{
++ return (I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL)
++ & ~I2C_FUNC_SMBUS_QUICK;
++}
++
++static struct i2c_algorithm twi_algorithm = {
++ .master_xfer = twi_xfer,
++ .functionality = twi_func,
++};
++
+/*
-+ * bbbbbbbb llllllll IZS sssss nnnn FDL\n\0
-+ *
-+ * b: buffer address
-+ * l: buffer length
-+ * I/i: interrupt/no interrupt
-+ * Z/z: zero/no zero
-+ * S/s: short ok/short not ok
-+ * s: status
-+ * n: nr_packets
-+ * F/f: submitted/not submitted to FIFO
-+ * D/d: using/not using DMA
-+ * L/l: last transaction/not last transaction
++ * Main initialization routine.
+ */
-+static ssize_t queue_dbg_read(struct file *file, char __user *buf,
-+ size_t nbytes, loff_t *ppos)
++static int __init twi_probe(struct platform_device *pdev)
+{
-+ struct list_head *queue = file->private_data;
-+ struct usba_request *req, *tmp_req;
-+ size_t len, remaining, actual = 0;
-+ char tmpbuf[38];
++ struct atmel_twi *twi;
++ struct resource *regs;
++ struct clk *pclk;
++ struct i2c_adapter *adapter;
++ int rc, irq;
+
-+ if (!access_ok(VERIFY_WRITE, buf, nbytes))
-+ return -EFAULT;
++ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (!regs)
++ return -ENXIO;
+
-+ mutex_lock(&file->f_dentry->d_inode->i_mutex);
-+ list_for_each_entry_safe(req, tmp_req, queue, queue) {
-+ len = snprintf(tmpbuf, sizeof(tmpbuf),
-+ "%8p %08x %c%c%c %5d %c%c%c\n",
-+ req->req.buf, req->req.length,
-+ req->req.no_interrupt ? 'i' : 'I',
-+ req->req.zero ? 'Z' : 'z',
-+ req->req.short_not_ok ? 's' : 'S',
-+ req->req.status,
-+ req->submitted ? 'F' : 'f',
-+ req->using_dma ? 'D' : 'd',
-+ req->last_transaction ? 'L' : 'l');
-+ len = min(len, sizeof(tmpbuf));
-+ if (len > nbytes)
-+ break;
++ pclk = clk_get(&pdev->dev, "twi_pclk");
++ if (IS_ERR(pclk))
++ return PTR_ERR(pclk);
++ clk_enable(pclk);
++
++ rc = -ENOMEM;
++ twi = kzalloc(sizeof(struct atmel_twi), GFP_KERNEL);
++ if (!twi) {
++ dev_dbg(&pdev->dev, "can't allocate interface!\n");
++ goto err_alloc_twi;
++ }
+
-+ list_del(&req->queue);
-+ kfree(req);
++ twi->pclk = pclk;
++ twi->regs = ioremap(regs->start, regs->end - regs->start + 1);
++ if (!twi->regs)
++ goto err_ioremap;
+
-+ remaining = __copy_to_user(buf, tmpbuf, len);
-+ actual += len - remaining;
-+ if (remaining)
-+ break;
++ irq = platform_get_irq(pdev, 0);
++ rc = request_irq(irq, twi_interrupt, 0, "twi", twi);
++ if (rc) {
++ dev_dbg(&pdev->dev, "can't bind irq!\n");
++ goto err_irq;
++ }
++ twi->irq = irq;
+
-+ nbytes -= len;
-+ buf += len;
++ rc = twi_hwinit(twi);
++ if (rc) {
++ dev_err(&pdev->dev, "Unable to set baudrate\n");
++ goto err_hw_init;
+ }
-+ mutex_unlock(&file->f_dentry->d_inode->i_mutex);
+
-+ return actual;
-+}
++ adapter = &twi->adapter;
++ sprintf(adapter->name, "TWI");
++ adapter->algo = &twi_algorithm;
++ adapter->class = I2C_CLASS_ALL;
++ adapter->nr = pdev->id;
++ adapter->dev.parent = &pdev->dev;
+
-+static int queue_dbg_release(struct inode *inode, struct file *file)
-+{
-+ struct list_head *queue_data = file->private_data;
-+ struct usba_request *req, *tmp_req;
++ platform_set_drvdata(pdev, twi);
+
-+ list_for_each_entry_safe(req, tmp_req, queue_data, queue) {
-+ list_del(&req->queue);
-+ kfree(req);
++ rc = i2c_add_numbered_adapter(adapter);
++ if (rc) {
++ dev_dbg(&pdev->dev, "Adapter %s registration failed\n",
++ adapter->name);
++ goto err_register;
+ }
-+ kfree(queue_data);
++
++ dev_info(&pdev->dev,
++ "Atmel TWI/I2C adapter (baudrate %dk) at 0x%08lx.\n",
++ baudrate/1000, (unsigned long)regs->start);
++
+ return 0;
-+}
+
-+static int regs_dbg_open(struct inode *inode, struct file *file)
-+{
-+ struct usba_udc *udc;
-+ unsigned int i;
-+ u32 *data;
-+ int ret = -ENOMEM;
+
-+ mutex_lock(&inode->i_mutex);
-+ udc = inode->i_private;
-+ data = kmalloc(inode->i_size, GFP_KERNEL);
-+ if (!data)
-+ goto out;
++err_register:
++ platform_set_drvdata(pdev, NULL);
+
-+ spin_lock_irq(&udc->lock);
-+ for (i = 0; i < inode->i_size / 4; i++)
-+ data[i] = __raw_readl(udc->regs + i * 4);
-+ spin_unlock_irq(&udc->lock);
++err_hw_init:
++ free_irq(irq, twi);
+
-+ file->private_data = data;
-+ ret = 0;
++err_irq:
++ iounmap(twi->regs);
+
-+out:
-+ mutex_unlock(&inode->i_mutex);
++err_ioremap:
++ kfree(twi);
+
-+ return ret;
++err_alloc_twi:
++ clk_disable(pclk);
++ clk_put(pclk);
++
++ return rc;
+}
+
-+static ssize_t regs_dbg_read(struct file *file, char __user *buf,
-+ size_t nbytes, loff_t *ppos)
++static int __exit twi_remove(struct platform_device *pdev)
+{
-+ struct inode *inode = file->f_dentry->d_inode;
-+ int ret;
++ struct atmel_twi *twi = platform_get_drvdata(pdev);
++ int res;
+
-+ mutex_lock(&inode->i_mutex);
-+ ret = simple_read_from_buffer(buf, nbytes, ppos,
-+ file->private_data,
-+ file->f_dentry->d_inode->i_size);
-+ mutex_unlock(&inode->i_mutex);
++ platform_set_drvdata(pdev, NULL);
++ res = i2c_del_adapter(&twi->adapter);
++ twi_writel(twi, CR, TWI_BIT(MSDIS));
++ iounmap(twi->regs);
++ clk_disable(twi->pclk);
++ clk_put(twi->pclk);
++ free_irq(twi->irq, twi);
++ kfree(twi);
+
-+ return ret;
++ return res;
+}
+
-+static int regs_dbg_release(struct inode *inode, struct file *file)
++static struct platform_driver twi_driver = {
++ .remove = __exit_p(twi_remove),
++ .driver = {
++ .name = "atmel_twi",
++ .owner = THIS_MODULE,
++ },
++};
++
++static int __init atmel_twi_init(void)
+{
-+ kfree(file->private_data);
-+ return 0;
++ return platform_driver_probe(&twi_driver, twi_probe);
+}
+
-+const struct file_operations queue_dbg_fops = {
-+ .owner = THIS_MODULE,
-+ .open = queue_dbg_open,
-+ .llseek = no_llseek,
-+ .read = queue_dbg_read,
-+ .release = queue_dbg_release,
-+};
++static void __exit atmel_twi_exit(void)
++{
++ platform_driver_unregister(&twi_driver);
++}
+
-+const struct file_operations regs_dbg_fops = {
-+ .owner = THIS_MODULE,
-+ .open = regs_dbg_open,
-+ .llseek = generic_file_llseek,
-+ .read = regs_dbg_read,
-+ .release = regs_dbg_release,
-+};
++module_init(atmel_twi_init);
++module_exit(atmel_twi_exit);
+
-+static void usba_ep_init_debugfs(struct usba_udc *udc,
-+ struct usba_ep *ep)
-+{
-+ struct dentry *ep_root;
++MODULE_AUTHOR("Espen Krangnes");
++MODULE_DESCRIPTION("I2C driver for Atmel TWI");
++MODULE_LICENSE("GPL");
+--- /dev/null
++++ b/drivers/i2c/busses/i2c-atmeltwi.h
+@@ -0,0 +1,117 @@
++/*
++ * Register definitions for the Atmel Two-Wire Interface
++ */
+
-+ ep_root = debugfs_create_dir(ep->ep.name, udc->debugfs_root);
-+ if (!ep_root)
-+ goto err_root;
-+ ep->debugfs_dir = ep_root;
++#ifndef __ATMELTWI_H__
++#define __ATMELTWI_H__
+
-+ ep->debugfs_queue = debugfs_create_file("queue", 0400, ep_root,
-+ ep, &queue_dbg_fops);
-+ if (!ep->debugfs_queue)
-+ goto err_queue;
++/* TWI register offsets */
++#define TWI_CR 0x0000
++#define TWI_MMR 0x0004
++#define TWI_SMR 0x0008
++#define TWI_IADR 0x000c
++#define TWI_CWGR 0x0010
++#define TWI_SR 0x0020
++#define TWI_IER 0x0024
++#define TWI_IDR 0x0028
++#define TWI_IMR 0x002c
++#define TWI_RHR 0x0030
++#define TWI_THR 0x0034
+
-+ if (ep->can_dma) {
-+ ep->debugfs_dma_status
-+ = debugfs_create_u32("dma_status", 0400, ep_root,
-+ &ep->last_dma_status);
-+ if (!ep->debugfs_dma_status)
-+ goto err_dma_status;
-+ }
-+ if (ep_is_control(ep)) {
-+ ep->debugfs_state
-+ = debugfs_create_u32("state", 0400, ep_root,
-+ &ep->state);
-+ if (!ep->debugfs_state)
-+ goto err_state;
-+ }
++/* Bitfields in CR */
++#define TWI_START_OFFSET 0
++#define TWI_START_SIZE 1
++#define TWI_STOP_OFFSET 1
++#define TWI_STOP_SIZE 1
++#define TWI_MSEN_OFFSET 2
++#define TWI_MSEN_SIZE 1
++#define TWI_MSDIS_OFFSET 3
++#define TWI_MSDIS_SIZE 1
++#define TWI_SVEN_OFFSET 4
++#define TWI_SVEN_SIZE 1
++#define TWI_SVDIS_OFFSET 5
++#define TWI_SVDIS_SIZE 1
++#define TWI_SWRST_OFFSET 7
++#define TWI_SWRST_SIZE 1
+
-+ return;
++/* Bitfields in MMR */
++#define TWI_IADRSZ_OFFSET 8
++#define TWI_IADRSZ_SIZE 2
++#define TWI_MREAD_OFFSET 12
++#define TWI_MREAD_SIZE 1
++#define TWI_DADR_OFFSET 16
++#define TWI_DADR_SIZE 7
+
-+err_state:
-+ if (ep->can_dma)
-+ debugfs_remove(ep->debugfs_dma_status);
-+err_dma_status:
-+ debugfs_remove(ep->debugfs_queue);
-+err_queue:
-+ debugfs_remove(ep_root);
-+err_root:
-+ dev_err(&ep->udc->pdev->dev,
-+ "failed to create debugfs directory for %s\n", ep->ep.name);
-+}
++/* Bitfields in SMR */
++#define TWI_SADR_OFFSET 16
++#define TWI_SADR_SIZE 7
+
-+static void usba_ep_cleanup_debugfs(struct usba_ep *ep)
-+{
-+ debugfs_remove(ep->debugfs_queue);
-+ debugfs_remove(ep->debugfs_dma_status);
-+ debugfs_remove(ep->debugfs_state);
-+ debugfs_remove(ep->debugfs_dir);
-+ ep->debugfs_dma_status = NULL;
-+ ep->debugfs_dir = NULL;
-+}
++/* Bitfields in IADR */
++#define TWI_IADR_OFFSET 0
++#define TWI_IADR_SIZE 24
+
-+static void usba_init_debugfs(struct usba_udc *udc)
-+{
-+ struct dentry *root, *regs;
-+ struct resource *regs_resource;
++/* Bitfields in CWGR */
++#define TWI_CLDIV_OFFSET 0
++#define TWI_CLDIV_SIZE 8
++#define TWI_CHDIV_OFFSET 8
++#define TWI_CHDIV_SIZE 8
++#define TWI_CKDIV_OFFSET 16
++#define TWI_CKDIV_SIZE 3
+
-+ root = debugfs_create_dir(udc->gadget.name, NULL);
-+ if (IS_ERR(root) || !root)
-+ goto err_root;
-+ udc->debugfs_root = root;
++/* Bitfields in SR */
++#define TWI_TXCOMP_OFFSET 0
++#define TWI_TXCOMP_SIZE 1
++#define TWI_RXRDY_OFFSET 1
++#define TWI_RXRDY_SIZE 1
++#define TWI_TXRDY_OFFSET 2
++#define TWI_TXRDY_SIZE 1
++#define TWI_SVDIR_OFFSET 3
++#define TWI_SVDIR_SIZE 1
++#define TWI_SVACC_OFFSET 4
++#define TWI_SVACC_SIZE 1
++#define TWI_GCACC_OFFSET 5
++#define TWI_GCACC_SIZE 1
++#define TWI_OVRE_OFFSET 6
++#define TWI_OVRE_SIZE 1
++#define TWI_UNRE_OFFSET 7
++#define TWI_UNRE_SIZE 1
++#define TWI_NACK_OFFSET 8
++#define TWI_NACK_SIZE 1
++#define TWI_ARBLST_OFFSET 9
++#define TWI_ARBLST_SIZE 1
+
-+ regs = debugfs_create_file("regs", 0400, root, udc, ®s_dbg_fops);
-+ if (!regs)
-+ goto err_regs;
++/* Bitfields in RHR */
++#define TWI_RXDATA_OFFSET 0
++#define TWI_RXDATA_SIZE 8
++
++/* Bitfields in THR */
++#define TWI_TXDATA_OFFSET 0
++#define TWI_TXDATA_SIZE 8
++
++/* Constants for IADRSZ */
++#define TWI_IADRSZ_NO_ADDR 0
++#define TWI_IADRSZ_ONE_BYTE 1
++#define TWI_IADRSZ_TWO_BYTES 2
++#define TWI_IADRSZ_THREE_BYTES 3
++
++/* Bit manipulation macros */
++#define TWI_BIT(name) \
++ (1 << TWI_##name##_OFFSET)
++#define TWI_BF(name, value) \
++ (((value) & ((1 << TWI_##name##_SIZE) - 1)) \
++ << TWI_##name##_OFFSET)
++#define TWI_BFEXT(name, value) \
++ (((value) >> TWI_##name##_OFFSET) \
++ & ((1 << TWI_##name##_SIZE) - 1))
++#define TWI_BFINS(name, value, old) \
++ (((old) & ~(((1 << TWI_##name##_SIZE) - 1) \
++ << TWI_##name##_OFFSET)) \
++ | TWI_BF(name, (value)))
+
-+ regs_resource = platform_get_resource(udc->pdev, IORESOURCE_MEM,
-+ CTRL_IOMEM_ID);
-+ regs->d_inode->i_size = regs_resource->end - regs_resource->start + 1;
-+ udc->debugfs_regs = regs;
++/* Register access macros */
++#define twi_readl(port, reg) \
++ __raw_readl((port)->regs + TWI_##reg)
++#define twi_writel(port, reg, value) \
++ __raw_writel((value), (port)->regs + TWI_##reg)
+
-+ usba_ep_init_debugfs(udc, to_usba_ep(udc->gadget.ep0));
++#endif /* __ATMELTWI_H__ */
+--- a/drivers/input/serio/Kconfig
++++ b/drivers/input/serio/Kconfig
+@@ -88,6 +88,17 @@ config SERIO_RPCKBD
+ To compile this driver as a module, choose M here: the
+ module will be called rpckbd.
+
++config SERIO_AT32PSIF
++ tristate "AVR32 PSIF PS/2 keyboard and mouse controller"
++ depends on AVR32
++ default n
++ help
++ Say Y here if you want to use the PSIF peripheral on AVR32 devices
++ and connect a PS/2 keyboard and/or mouse to it.
++
++ To compile this driver as a module, choose M here: the module will
++ be called at32psif.
++
+ config SERIO_AMBAKMI
+ tristate "AMBA KMI keyboard controller"
+ depends on ARM_AMBA
+--- a/drivers/input/serio/Makefile
++++ b/drivers/input/serio/Makefile
+@@ -12,6 +12,7 @@ obj-$(CONFIG_SERIO_CT82C710) += ct82c710
+ obj-$(CONFIG_SERIO_RPCKBD) += rpckbd.o
+ obj-$(CONFIG_SERIO_SA1111) += sa1111ps2.o
+ obj-$(CONFIG_SERIO_AMBAKMI) += ambakmi.o
++obj-$(CONFIG_SERIO_AT32PSIF) += at32psif.o
+ obj-$(CONFIG_SERIO_Q40KBD) += q40kbd.o
+ obj-$(CONFIG_SERIO_GSCPS2) += gscps2.o
+ obj-$(CONFIG_HP_SDC) += hp_sdc.o
+--- /dev/null
++++ b/drivers/input/serio/at32psif.c
+@@ -0,0 +1,351 @@
++/*
++ * Copyright (C) 2007 Atmel Corporation
++ *
++ * Driver for the AT32AP700X PS/2 controller (PSIF).
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/device.h>
++#include <linux/init.h>
++#include <linux/serio.h>
++#include <linux/timer.h>
++#include <linux/interrupt.h>
++#include <linux/err.h>
++#include <linux/io.h>
++#include <linux/clk.h>
++#include <linux/platform_device.h>
+
-+ return;
++#include "at32psif.h"
+
-+err_regs:
-+ debugfs_remove(root);
-+err_root:
-+ udc->debugfs_root = NULL;
-+ dev_err(&udc->pdev->dev, "debugfs is not available\n");
-+}
++#define PSIF_BUF_SIZE 16
+
-+static void usba_cleanup_debugfs(struct usba_udc *udc)
-+{
-+ usba_ep_cleanup_debugfs(to_usba_ep(udc->gadget.ep0));
-+ debugfs_remove(udc->debugfs_regs);
-+ debugfs_remove(udc->debugfs_root);
-+ udc->debugfs_regs = NULL;
-+ udc->debugfs_root = NULL;
-+}
-+#else
-+static inline void usba_ep_init_debugfs(struct usba_udc *udc,
-+ struct usba_ep *ep)
-+{
++#define ring_is_empty(_psif) (_psif->head == _psif->tail)
++#define ring_next_head(_psif) ((_psif->head + 1) & (PSIF_BUF_SIZE - 1))
++#define ring_next_tail(_psif) ((_psif->tail + 1) & (PSIF_BUF_SIZE - 1))
+
-+}
++struct psif {
++ struct platform_device *pdev;
++ struct clk *pclk;
++ struct serio *io;
++ struct timer_list tx_timer;
++ void __iomem *regs;
++ unsigned int irq;
++ unsigned int open;
++ /* Prevent concurrent writes to circular buffer. */
++ spinlock_t lock;
++ unsigned int head;
++ unsigned int tail;
++ unsigned char buffer[PSIF_BUF_SIZE];
++};
+
-+static inline void usba_ep_cleanup_debugfs(struct usba_ep *ep)
++static irqreturn_t psif_interrupt(int irq, void *_ptr)
+{
++ struct psif *psif = _ptr;
++ int retval = IRQ_NONE;
++ unsigned int io_flags = 0;
++ unsigned long status;
+
-+}
++ status = psif_readl(psif, SR);
+
-+static inline void usba_init_debugfs(struct usba_udc *udc)
-+{
++ if (status & PSIF_BIT(RXRDY)) {
++ unsigned char val = (unsigned char) psif_readl(psif, RHR);
+
-+}
++ if (status & PSIF_BIT(PARITY))
++ io_flags |= SERIO_PARITY;
++ if (status & PSIF_BIT(OVRUN))
++ dev_err(&psif->pdev->dev, "overrun read error\n");
+
-+static inline void usba_cleanup_debugfs(struct usba_udc *udc)
-+{
++ serio_interrupt(psif->io, val, io_flags);
+
-+}
-+#endif
++ retval = IRQ_HANDLED;
++ }
+
-+static int vbus_is_present(struct usba_udc *udc)
-+{
-+ if (udc->vbus_pin != -1)
-+ return gpio_get_value(udc->vbus_pin);
++ spin_lock(&psif->lock);
+
-+ /* No Vbus detection: Assume always present */
-+ return 1;
-+}
++ if (status & PSIF_BIT(TXEMPTY)) {
++ if (status & PSIF_BIT(NACK))
++ dev_err(&psif->pdev->dev, "NACK error\n");
+
-+static void copy_to_fifo(void __iomem *fifo, const void *buf, int len)
-+{
-+ unsigned long tmp;
++ psif_writel(psif, IDR, PSIF_BIT(TXEMPTY));
+
-+ DBG(DBG_FIFO, "copy to FIFO (len %d):\n", len);
-+ for (; len > 0; len -= 4, buf += 4, fifo += 4) {
-+ tmp = *(unsigned long *)buf;
-+ if (len >= 4) {
-+ DBG(DBG_FIFO, " -> %08lx\n", tmp);
-+ __raw_writel(tmp, fifo);
-+ } else {
-+ do {
-+ DBG(DBG_FIFO, " -> %02lx\n", tmp >> 24);
-+ __raw_writeb(tmp >> 24, fifo);
-+ fifo++;
-+ tmp <<= 8;
-+ } while (--len);
-+ break;
-+ }
++ if (!ring_is_empty(psif))
++ mod_timer(&psif->tx_timer,
++ jiffies + msecs_to_jiffies(1));
++
++ retval = IRQ_HANDLED;
+ }
-+}
+
-+static void copy_from_fifo(void *buf, void __iomem *fifo, int len)
-+{
-+ union {
-+ unsigned long *w;
-+ unsigned char *b;
-+ } p;
-+ unsigned long tmp;
++ spin_unlock(&psif->lock);
+
-+ DBG(DBG_FIFO, "copy from FIFO (len %d):\n", len);
-+ for (p.w = buf; len > 0; len -= 4, p.w++, fifo += 4) {
-+ if (len >= 4) {
-+ tmp = __raw_readl(fifo);
-+ *p.w = tmp;
-+ DBG(DBG_FIFO, " -> %08lx\n", tmp);
-+ } else {
-+ do {
-+ tmp = __raw_readb(fifo);
-+ *p.b = tmp;
-+ DBG(DBG_FIFO, " -> %02lx\n", tmp);
-+ fifo++, p.b++;
-+ } while (--len);
-+ }
-+ }
++ return retval;
+}
+
-+static void next_fifo_transaction(struct usba_ep *ep, struct usba_request *req)
++static void psif_transmit_data(unsigned long data)
+{
-+ unsigned int transaction_len;
++ struct psif *psif = (struct psif *)data;
++ unsigned long flags;
++
++ spin_lock_irqsave(&psif->lock, flags);
+
-+ transaction_len = req->req.length - req->req.actual;
-+ req->last_transaction = 1;
-+ if (transaction_len > ep->ep.maxpacket) {
-+ transaction_len = ep->ep.maxpacket;
-+ req->last_transaction = 0;
-+ } else if (transaction_len == ep->ep.maxpacket && req->req.zero)
-+ req->last_transaction = 0;
++ psif_writel(psif, THR, psif->buffer[psif->tail]);
++ psif->tail = ring_next_tail(psif);
+
-+ DBG(DBG_QUEUE, "%s: submit_transaction, req %p (length %d)%s\n",
-+ ep->ep.name, req, transaction_len,
-+ req->last_transaction ? ", done" : "");
++ if (!ring_is_empty(psif))
++ psif_writel(psif, IER, PSIF_BIT(TXEMPTY));
+
-+ copy_to_fifo(ep->fifo, req->req.buf + req->req.actual, transaction_len);
-+ usba_ep_writel(ep, SET_STA, USBA_TX_PK_RDY);
-+ req->req.actual += transaction_len;
++ spin_unlock_irqrestore(&psif->lock, flags);
+}
+
-+static void submit_request(struct usba_ep *ep, struct usba_request *req)
++static int psif_write(struct serio *io, unsigned char val)
+{
-+ DBG(DBG_QUEUE, "%s: submit_request: req %p (length %d)\n",
-+ ep->ep.name, req, req->req.length);
-+
-+ req->req.actual = 0;
-+ req->submitted = 1;
++ struct psif *psif = io->port_data;
++ unsigned long flags;
++ unsigned int head;
+
-+ if (req->using_dma) {
-+ if (req->req.length == 0) {
-+ usba_ep_writel(ep, CTL_ENB, USBA_TX_PK_RDY);
-+ return;
-+ }
++ spin_lock_irqsave(&psif->lock, flags);
+
-+ if (req->req.zero)
-+ usba_ep_writel(ep, CTL_ENB, USBA_SHORT_PACKET);
-+ else
-+ usba_ep_writel(ep, CTL_DIS, USBA_SHORT_PACKET);
++ head = ring_next_head(psif);
+
-+ usba_dma_writel(ep, ADDRESS, req->req.dma);
-+ usba_dma_writel(ep, CONTROL, req->ctrl);
++ if (head != psif->tail) {
++ psif->buffer[psif->head] = val;
++ psif->head = head;
+ } else {
-+ next_fifo_transaction(ep, req);
-+ if (req->last_transaction) {
-+ usba_ep_writel(ep, CTL_DIS, USBA_TX_PK_RDY);
-+ usba_ep_writel(ep, CTL_ENB, USBA_TX_COMPLETE);
-+ } else {
-+ usba_ep_writel(ep, CTL_DIS, USBA_TX_COMPLETE);
-+ usba_ep_writel(ep, CTL_ENB, USBA_TX_PK_RDY);
-+ }
++ dev_err(&psif->pdev->dev, "underrun write error\n");
+ }
-+}
+
-+static void submit_next_request(struct usba_ep *ep)
-+{
-+ struct usba_request *req;
-+
-+ if (list_empty(&ep->queue)) {
-+ usba_ep_writel(ep, CTL_DIS, USBA_TX_PK_RDY | USBA_RX_BK_RDY);
-+ return;
-+ }
++ spin_unlock_irqrestore(&psif->lock, flags);
+
-+ req = list_entry(ep->queue.next, struct usba_request, queue);
-+ if (!req->submitted)
-+ submit_request(ep, req);
-+}
++ /* Make sure TXEMPTY interrupt is enabled. */
++ psif_writel(psif, IER, PSIF_BIT(TXEMPTY));
+
-+static void send_status(struct usba_udc *udc, struct usba_ep *ep)
-+{
-+ ep->state = STATUS_STAGE_IN;
-+ usba_ep_writel(ep, SET_STA, USBA_TX_PK_RDY);
-+ usba_ep_writel(ep, CTL_ENB, USBA_TX_COMPLETE);
++ return 0;
+}
+
-+static void receive_data(struct usba_ep *ep)
++static int psif_open(struct serio *io)
+{
-+ struct usba_udc *udc = ep->udc;
-+ struct usba_request *req;
-+ unsigned long status;
-+ unsigned int bytecount, nr_busy;
-+ int is_complete = 0;
-+
-+ status = usba_ep_readl(ep, STA);
-+ nr_busy = USBA_BFEXT(BUSY_BANKS, status);
-+
-+ DBG(DBG_QUEUE, "receive data: nr_busy=%u\n", nr_busy);
-+
-+ while (nr_busy > 0) {
-+ if (list_empty(&ep->queue)) {
-+ usba_ep_writel(ep, CTL_DIS, USBA_RX_BK_RDY);
-+ break;
-+ }
-+ req = list_entry(ep->queue.next,
-+ struct usba_request, queue);
++ struct psif *psif = io->port_data;
++ int retval;
+
-+ bytecount = USBA_BFEXT(BYTE_COUNT, status);
++ retval = clk_enable(psif->pclk);
++ if (retval)
++ goto out;
+
-+ if (status & (1 << 31))
-+ is_complete = 1;
-+ if (req->req.actual + bytecount >= req->req.length) {
-+ is_complete = 1;
-+ bytecount = req->req.length - req->req.actual;
-+ }
++ psif_writel(psif, CR, PSIF_BIT(CR_TXEN) | PSIF_BIT(CR_RXEN));
++ psif_writel(psif, IER, PSIF_BIT(RXRDY));
+
-+ copy_from_fifo(req->req.buf + req->req.actual,
-+ ep->fifo, bytecount);
-+ req->req.actual += bytecount;
++ psif->open = 1;
++out:
++ return retval;
++}
+
-+ usba_ep_writel(ep, CLR_STA, USBA_RX_BK_RDY);
++static void psif_close(struct serio *io)
++{
++ struct psif *psif = io->port_data;
+
-+ if (is_complete) {
-+ DBG(DBG_QUEUE, "%s: request done\n", ep->ep.name);
-+ req->req.status = 0;
-+ list_del_init(&req->queue);
-+ usba_ep_writel(ep, CTL_DIS, USBA_RX_BK_RDY);
-+ spin_unlock(&udc->lock);
-+ req->req.complete(&ep->ep, &req->req);
-+ spin_lock(&udc->lock);
-+ }
++ psif->open = 0;
+
-+ status = usba_ep_readl(ep, STA);
-+ nr_busy = USBA_BFEXT(BUSY_BANKS, status);
++ psif_writel(psif, IDR, ~0UL);
++ psif_writel(psif, CR, PSIF_BIT(CR_TXDIS) | PSIF_BIT(CR_RXDIS));
+
-+ if (is_complete && ep_is_control(ep)) {
-+ send_status(udc, ep);
-+ break;
-+ }
-+ }
++ clk_disable(psif->pclk);
+}
+
-+static void
-+request_complete(struct usba_ep *ep, struct usba_request *req, int status)
++static void psif_set_prescaler(struct psif *psif)
+{
-+ struct usba_udc *udc = ep->udc;
-+
-+ WARN_ON(!list_empty(&req->queue));
++ unsigned long prscv;
++ unsigned long rate = clk_get_rate(psif->pclk);
+
-+ if (req->req.status == -EINPROGRESS)
-+ req->req.status = status;
++ /* PRSCV = Pulse length (100 us) * PSIF module frequency. */
++ prscv = 100 * (rate / 1000000UL);
+
-+ if (req->mapped) {
-+ dma_unmap_single(
-+ &udc->pdev->dev, req->req.dma, req->req.length,
-+ ep->is_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
-+ req->req.dma = DMA_ADDR_INVALID;
-+ req->mapped = 0;
++ if (prscv > ((1<<PSIF_PSR_PRSCV_SIZE) - 1)) {
++ prscv = (1<<PSIF_PSR_PRSCV_SIZE) - 1;
++ dev_dbg(&psif->pdev->dev, "pclk too fast, "
++ "prescaler set to max\n");
+ }
+
-+ DBG(DBG_GADGET | DBG_REQ,
-+ "%s: req %p complete: status %d, actual %u\n",
-+ ep->ep.name, req, req->req.status, req->req.actual);
-+
-+ spin_unlock(&udc->lock);
-+ req->req.complete(&ep->ep, &req->req);
-+ spin_lock(&udc->lock);
++ clk_enable(psif->pclk);
++ psif_writel(psif, PSR, prscv);
++ clk_disable(psif->pclk);
+}
+
-+static void
-+request_complete_list(struct usba_ep *ep, struct list_head *list, int status)
++static int __init psif_probe(struct platform_device *pdev)
+{
-+ struct usba_request *req, *tmp_req;
++ struct resource *regs;
++ struct psif *psif;
++ struct serio *io;
++ struct clk *pclk;
++ int irq;
++ int ret;
+
-+ list_for_each_entry_safe(req, tmp_req, list, queue) {
-+ list_del_init(&req->queue);
-+ request_complete(ep, req, status);
++ psif = kzalloc(sizeof(struct psif), GFP_KERNEL);
++ if (!psif) {
++ dev_dbg(&pdev->dev, "out of memory\n");
++ ret = -ENOMEM;
++ goto out;
+ }
-+}
-+
-+static int
-+usba_ep_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
-+{
-+ struct usba_ep *ep = to_usba_ep(_ep);
-+ struct usba_udc *udc = ep->udc;
-+ unsigned long flags, ept_cfg, maxpacket;
-+ unsigned int nr_trans;
-+
-+ DBG(DBG_GADGET, "%s: ep_enable: desc=%p\n", ep->ep.name, desc);
-+
-+ maxpacket = le16_to_cpu(desc->wMaxPacketSize) & 0x7ff;
++ psif->pdev = pdev;
+
-+ if (((desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK) != ep->index)
-+ || ep->index == 0
-+ || desc->bDescriptorType != USB_DT_ENDPOINT
-+ || maxpacket == 0
-+ || maxpacket > ep->fifo_size) {
-+ DBG(DBG_ERR, "ep_enable: Invalid argument");
-+ return -EINVAL;
++ io = kzalloc(sizeof(struct serio), GFP_KERNEL);
++ if (!io) {
++ dev_dbg(&pdev->dev, "out of memory\n");
++ ret = -ENOMEM;
++ goto out_free_psif;
+ }
++ psif->io = io;
+
-+ ep->is_isoc = 0;
-+ ep->is_in = 0;
-+
-+ if (maxpacket <= 8)
-+ ept_cfg = USBA_BF(EPT_SIZE, USBA_EPT_SIZE_8);
-+ else
-+ /* LSB is bit 1, not 0 */
-+ ept_cfg = USBA_BF(EPT_SIZE, fls(maxpacket - 1) - 3);
-+
-+ DBG(DBG_HW, "%s: EPT_SIZE = %lu (maxpacket = %lu)\n",
-+ ep->ep.name, ept_cfg, maxpacket);
-+
-+ if ((desc->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) {
-+ ep->is_in = 1;
-+ ept_cfg |= USBA_EPT_DIR_IN;
++ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (!regs) {
++ dev_dbg(&pdev->dev, "no mmio resources defined\n");
++ ret = -ENOMEM;
++ goto out_free_io;
+ }
+
-+ switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
-+ case USB_ENDPOINT_XFER_CONTROL:
-+ ept_cfg |= USBA_BF(EPT_TYPE, USBA_EPT_TYPE_CONTROL);
-+ ept_cfg |= USBA_BF(BK_NUMBER, USBA_BK_NUMBER_ONE);
-+ break;
-+ case USB_ENDPOINT_XFER_ISOC:
-+ if (!ep->can_isoc) {
-+ DBG(DBG_ERR, "ep_enable: %s is not isoc capable\n",
-+ ep->ep.name);
-+ return -EINVAL;
-+ }
-+
-+ /*
-+ * Bits 11:12 specify number of _additional_
-+ * transactions per microframe.
-+ */
-+ nr_trans = ((le16_to_cpu(desc->wMaxPacketSize) >> 11) & 3) + 1;
-+ if (nr_trans > 3)
-+ return -EINVAL;
-+
-+ ep->is_isoc = 1;
-+ ept_cfg |= USBA_BF(EPT_TYPE, USBA_EPT_TYPE_ISO);
-+
-+ /*
-+ * Do triple-buffering on high-bandwidth iso endpoints.
-+ */
-+ if (nr_trans > 1 && ep->nr_banks == 3)
-+ ept_cfg |= USBA_BF(BK_NUMBER, USBA_BK_NUMBER_TRIPLE);
-+ else
-+ ept_cfg |= USBA_BF(BK_NUMBER, USBA_BK_NUMBER_DOUBLE);
-+ ept_cfg |= USBA_BF(NB_TRANS, nr_trans);
-+ break;
-+ case USB_ENDPOINT_XFER_BULK:
-+ ept_cfg |= USBA_BF(EPT_TYPE, USBA_EPT_TYPE_BULK);
-+ ept_cfg |= USBA_BF(BK_NUMBER, USBA_BK_NUMBER_DOUBLE);
-+ break;
-+ case USB_ENDPOINT_XFER_INT:
-+ ept_cfg |= USBA_BF(EPT_TYPE, USBA_EPT_TYPE_INT);
-+ ept_cfg |= USBA_BF(BK_NUMBER, USBA_BK_NUMBER_DOUBLE);
-+ break;
++ psif->regs = ioremap(regs->start, regs->end - regs->start + 1);
++ if (!psif->regs) {
++ ret = -ENOMEM;
++ dev_dbg(&pdev->dev, "could not map I/O memory\n");
++ goto out_free_io;
+ }
+
-+ spin_lock_irqsave(&ep->udc->lock, flags);
-+
-+ if (ep->desc) {
-+ spin_unlock_irqrestore(&ep->udc->lock, flags);
-+ DBG(DBG_ERR, "ep%d already enabled\n", ep->index);
-+ return -EBUSY;
++ pclk = clk_get(&pdev->dev, "pclk");
++ if (IS_ERR(pclk)) {
++ dev_dbg(&pdev->dev, "could not get peripheral clock\n");
++ ret = PTR_ERR(pclk);
++ goto out_iounmap;
+ }
++ psif->pclk = pclk;
+
-+ ep->desc = desc;
-+ ep->ep.maxpacket = maxpacket;
-+
-+ usba_ep_writel(ep, CFG, ept_cfg);
-+ usba_ep_writel(ep, CTL_ENB, USBA_EPT_ENABLE);
-+
-+ if (ep->can_dma) {
-+ u32 ctrl;
-+
-+ usba_writel(udc, INT_ENB,
-+ (usba_readl(udc, INT_ENB)
-+ | USBA_BF(EPT_INT, 1 << ep->index)
-+ | USBA_BF(DMA_INT, 1 << ep->index)));
-+ ctrl = USBA_AUTO_VALID | USBA_INTDIS_DMA;
-+ usba_ep_writel(ep, CTL_ENB, ctrl);
-+ } else {
-+ usba_writel(udc, INT_ENB,
-+ (usba_readl(udc, INT_ENB)
-+ | USBA_BF(EPT_INT, 1 << ep->index)));
++ /* Reset the PSIF to enter at a known state. */
++ ret = clk_enable(pclk);
++ if (ret) {
++ dev_dbg(&pdev->dev, "could not enable pclk\n");
++ goto out_put_clk;
+ }
++ psif_writel(psif, CR, PSIF_BIT(CR_SWRST));
++ clk_disable(pclk);
+
-+ spin_unlock_irqrestore(&udc->lock, flags);
-+
-+ DBG(DBG_HW, "EPT_CFG%d after init: %#08lx\n", ep->index,
-+ (unsigned long)usba_ep_readl(ep, CFG));
-+ DBG(DBG_HW, "INT_ENB after init: %#08lx\n",
-+ (unsigned long)usba_readl(udc, INT_ENB));
-+
-+ return 0;
-+}
-+
-+static int usba_ep_disable(struct usb_ep *_ep)
-+{
-+ struct usba_ep *ep = to_usba_ep(_ep);
-+ struct usba_udc *udc = ep->udc;
-+ LIST_HEAD(req_list);
-+ unsigned long flags;
-+
-+ DBG(DBG_GADGET, "ep_disable: %s\n", ep->ep.name);
-+
-+ spin_lock_irqsave(&udc->lock, flags);
++ setup_timer(&psif->tx_timer, psif_transmit_data, (unsigned long)psif);
+
-+ if (!ep->desc) {
-+ spin_unlock_irqrestore(&udc->lock, flags);
-+ DBG(DBG_ERR, "ep_disable: %s not enabled\n", ep->ep.name);
-+ return -EINVAL;
++ irq = platform_get_irq(pdev, 0);
++ if (irq < 0) {
++ dev_dbg(&pdev->dev, "could not get irq\n");
++ ret = -ENXIO;
++ goto out_put_clk;
+ }
-+ ep->desc = NULL;
-+
-+ list_splice_init(&ep->queue, &req_list);
-+ if (ep->can_dma) {
-+ usba_dma_writel(ep, CONTROL, 0);
-+ usba_dma_writel(ep, ADDRESS, 0);
-+ usba_dma_readl(ep, STATUS);
++ ret = request_irq(irq, psif_interrupt, IRQF_SHARED, "at32psif", psif);
++ if (ret) {
++ dev_dbg(&pdev->dev, "could not request irq %d\n", irq);
++ goto out_put_clk;
+ }
-+ usba_ep_writel(ep, CTL_DIS, USBA_EPT_ENABLE);
-+ usba_writel(udc, INT_ENB,
-+ usba_readl(udc, INT_ENB)
-+ & ~USBA_BF(EPT_INT, 1 << ep->index));
-+
-+ request_complete_list(ep, &req_list, -ESHUTDOWN);
-+
-+ spin_unlock_irqrestore(&udc->lock, flags);
++ psif->irq = irq;
+
-+ return 0;
-+}
-+
-+static struct usb_request *
-+usba_ep_alloc_request(struct usb_ep *_ep, gfp_t gfp_flags)
-+{
-+ struct usba_request *req;
++ io->id.type = SERIO_8042;
++ io->write = psif_write;
++ io->open = psif_open;
++ io->close = psif_close;
++ strlcpy(io->name, pdev->dev.bus_id, sizeof(io->name));
++ strlcpy(io->phys, pdev->dev.bus_id, sizeof(io->phys));
++ io->port_data = psif;
++ io->dev.parent = &pdev->dev;
+
-+ DBG(DBG_GADGET, "ep_alloc_request: %p, 0x%x\n", _ep, gfp_flags);
++ psif_set_prescaler(psif);
+
-+ req = kzalloc(sizeof(*req), gfp_flags);
-+ if (!req)
-+ return NULL;
-+
-+ INIT_LIST_HEAD(&req->queue);
-+ req->req.dma = DMA_ADDR_INVALID;
-+
-+ return &req->req;
-+}
++ spin_lock_init(&psif->lock);
++ serio_register_port(psif->io);
++ platform_set_drvdata(pdev, psif);
+
-+static void
-+usba_ep_free_request(struct usb_ep *_ep, struct usb_request *_req)
-+{
-+ struct usba_request *req = to_usba_req(_req);
++ dev_info(&pdev->dev, "Atmel AVR32 PSIF PS/2 driver on 0x%08x irq %d\n",
++ (int)psif->regs, psif->irq);
+
-+ DBG(DBG_GADGET, "ep_free_request: %p, %p\n", _ep, _req);
++ return 0;
+
-+ kfree(req);
++out_put_clk:
++ clk_put(psif->pclk);
++out_iounmap:
++ iounmap(psif->regs);
++out_free_io:
++ kfree(io);
++out_free_psif:
++ kfree(psif);
++out:
++ return ret;
+}
+
-+static int queue_dma(struct usba_udc *udc, struct usba_ep *ep,
-+ struct usba_request *req, gfp_t gfp_flags)
++static int __exit psif_remove(struct platform_device *pdev)
+{
-+ unsigned long flags;
-+ int ret;
-+
-+ DBG(DBG_DMA, "%s: req l/%u d/%08x %c%c%c\n",
-+ ep->ep.name, req->req.length, req->req.dma,
-+ req->req.zero ? 'Z' : 'z',
-+ req->req.short_not_ok ? 'S' : 's',
-+ req->req.no_interrupt ? 'I' : 'i');
-+
-+ if (req->req.length > 0x10000) {
-+ /* Lengths from 0 to 65536 (inclusive) are supported */
-+ DBG(DBG_ERR, "invalid request length %u\n", req->req.length);
-+ return -EINVAL;
-+ }
++ struct psif *psif = platform_get_drvdata(pdev);
+
-+ req->using_dma = 1;
++ psif_writel(psif, IDR, ~0UL);
++ psif_writel(psif, CR, PSIF_BIT(CR_TXDIS) | PSIF_BIT(CR_RXDIS));
+
-+ if (req->req.dma == DMA_ADDR_INVALID) {
-+ req->req.dma = dma_map_single(
-+ &udc->pdev->dev, req->req.buf, req->req.length,
-+ ep->is_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
-+ req->mapped = 1;
-+ } else {
-+ dma_sync_single_for_device(
-+ &udc->pdev->dev, req->req.dma, req->req.length,
-+ ep->is_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
-+ req->mapped = 0;
-+ }
++ serio_unregister_port(psif->io);
++ iounmap(psif->regs);
++ free_irq(psif->irq, psif);
++ clk_put(psif->pclk);
++ kfree(psif);
+
-+ req->ctrl = USBA_BF(DMA_BUF_LEN, req->req.length)
-+ | USBA_DMA_CH_EN | USBA_DMA_END_BUF_IE
-+ | USBA_DMA_END_TR_EN | USBA_DMA_END_TR_IE;
++ platform_set_drvdata(pdev, NULL);
+
-+ if (ep->is_in)
-+ req->ctrl |= USBA_DMA_END_BUF_EN;
++ return 0;
++}
+
-+ /*
-+ * Add this request to the queue and submit for DMA if
-+ * possible. Check if we're still alive first -- we may have
-+ * received a reset since last time we checked.
-+ */
-+ ret = -ESHUTDOWN;
-+ spin_lock_irqsave(&udc->lock, flags);
-+ if (ep->desc) {
-+ if (list_empty(&ep->queue))
-+ submit_request(ep, req);
++#ifdef CONFIG_PM
++static int psif_suspend(struct platform_device *pdev, pm_message_t state)
++{
++ struct psif *psif = platform_get_drvdata(pdev);
+
-+ list_add_tail(&req->queue, &ep->queue);
-+ ret = 0;
++ if (psif->open) {
++ psif_writel(psif, CR, PSIF_BIT(CR_RXDIS) | PSIF_BIT(CR_TXDIS));
++ clk_disable(psif->pclk);
+ }
-+ spin_unlock_irqrestore(&udc->lock, flags);
+
-+ return ret;
++ return 0;
+}
+
-+static int
-+usba_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
++static int psif_resume(struct platform_device *pdev)
+{
-+ struct usba_request *req = to_usba_req(_req);
-+ struct usba_ep *ep = to_usba_ep(_ep);
-+ struct usba_udc *udc = ep->udc;
-+ unsigned long flags;
-+ int ret;
++ struct psif *psif = platform_get_drvdata(pdev);
+
-+ DBG(DBG_GADGET | DBG_QUEUE | DBG_REQ, "%s: queue req %p, len %u\n",
-+ ep->ep.name, req, _req->length);
-+
-+ if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN || !ep->desc)
-+ return -ESHUTDOWN;
-+
-+ req->submitted = 0;
-+ req->using_dma = 0;
-+ req->last_transaction = 0;
-+
-+ _req->status = -EINPROGRESS;
-+ _req->actual = 0;
-+
-+ if (ep->can_dma)
-+ return queue_dma(udc, ep, req, gfp_flags);
-+
-+ /* May have received a reset since last time we checked */
-+ ret = -ESHUTDOWN;
-+ spin_lock_irqsave(&udc->lock, flags);
-+ if (ep->desc) {
-+ list_add_tail(&req->queue, &ep->queue);
-+
-+ if (ep->is_in || (ep_is_control(ep)
-+ && (ep->state == DATA_STAGE_IN
-+ || ep->state == STATUS_STAGE_IN)))
-+ usba_ep_writel(ep, CTL_ENB, USBA_TX_PK_RDY);
-+ else
-+ usba_ep_writel(ep, CTL_ENB, USBA_RX_BK_RDY);
-+ ret = 0;
++ if (psif->open) {
++ clk_enable(psif->pclk);
++ psif_set_prescaler(psif);
++ psif_writel(psif, CR, PSIF_BIT(CR_RXEN) | PSIF_BIT(CR_TXEN));
+ }
-+ spin_unlock_irqrestore(&udc->lock, flags);
+
-+ return ret;
++ return 0;
+}
++#else
++#define psif_suspend NULL
++#define psif_resume NULL
++#endif
++
++static struct platform_driver psif_driver = {
++ .remove = __exit_p(psif_remove),
++ .driver = {
++ .name = "atmel_psif",
++ },
++ .suspend = psif_suspend,
++ .resume = psif_resume,
++};
+
-+static void
-+usba_update_req(struct usba_ep *ep, struct usba_request *req, u32 status)
++static int __init psif_init(void)
+{
-+ req->req.actual = req->req.length - USBA_BFEXT(DMA_BUF_LEN, status);
++ return platform_driver_probe(&psif_driver, psif_probe);
+}
+
-+static int stop_dma(struct usba_ep *ep, u32 *pstatus)
++static void __exit psif_exit(void)
+{
-+ unsigned int timeout;
-+ u32 status;
++ platform_driver_unregister(&psif_driver);
++}
+
-+ /*
-+ * Stop the DMA controller. When writing both CH_EN
-+ * and LINK to 0, the other bits are not affected.
-+ */
-+ usba_dma_writel(ep, CONTROL, 0);
++module_init(psif_init);
++module_exit(psif_exit);
+
-+ /* Wait for the FIFO to empty */
-+ for (timeout = 40; timeout; --timeout) {
-+ status = usba_dma_readl(ep, STATUS);
-+ if (!(status & USBA_DMA_CH_EN))
-+ break;
-+ udelay(1);
-+ }
++MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
++MODULE_DESCRIPTION("Atmel AVR32 PSIF PS/2 driver");
++MODULE_LICENSE("GPL");
+--- /dev/null
++++ b/drivers/input/serio/at32psif.h
+@@ -0,0 +1,82 @@
++/*
++ * Copyright (C) 2007 Atmel Corporation
++ *
++ * Driver for the AT32AP700X PS/2 controller (PSIF).
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
+
-+ if (pstatus)
-+ *pstatus = status;
++#ifndef _AT32PSIF_H
++#define _AT32PSIF_H
++
++/* PSIF register offsets */
++#define PSIF_CR 0x00
++#define PSIF_RHR 0x04
++#define PSIF_THR 0x08
++#define PSIF_SR 0x10
++#define PSIF_IER 0x14
++#define PSIF_IDR 0x18
++#define PSIF_IMR 0x1c
++#define PSIF_PSR 0x24
++
++/* Bitfields in control register. */
++#define PSIF_CR_RXDIS_OFFSET 1
++#define PSIF_CR_RXDIS_SIZE 1
++#define PSIF_CR_RXEN_OFFSET 0
++#define PSIF_CR_RXEN_SIZE 1
++#define PSIF_CR_SWRST_OFFSET 15
++#define PSIF_CR_SWRST_SIZE 1
++#define PSIF_CR_TXDIS_OFFSET 9
++#define PSIF_CR_TXDIS_SIZE 1
++#define PSIF_CR_TXEN_OFFSET 8
++#define PSIF_CR_TXEN_SIZE 1
++
++/* Bitfields in interrupt disable, enable, mask and status register. */
++#define PSIF_NACK_OFFSET 8
++#define PSIF_NACK_SIZE 1
++#define PSIF_OVRUN_OFFSET 5
++#define PSIF_OVRUN_SIZE 1
++#define PSIF_PARITY_OFFSET 9
++#define PSIF_PARITY_SIZE 1
++#define PSIF_RXRDY_OFFSET 4
++#define PSIF_RXRDY_SIZE 1
++#define PSIF_TXEMPTY_OFFSET 1
++#define PSIF_TXEMPTY_SIZE 1
++#define PSIF_TXRDY_OFFSET 0
++#define PSIF_TXRDY_SIZE 1
++
++/* Bitfields in prescale register. */
++#define PSIF_PSR_PRSCV_OFFSET 0
++#define PSIF_PSR_PRSCV_SIZE 12
++
++/* Bitfields in receive hold register. */
++#define PSIF_RHR_RXDATA_OFFSET 0
++#define PSIF_RHR_RXDATA_SIZE 8
++
++/* Bitfields in transmit hold register. */
++#define PSIF_THR_TXDATA_OFFSET 0
++#define PSIF_THR_TXDATA_SIZE 8
+
-+ if (timeout == 0) {
-+ dev_err(&ep->udc->pdev->dev,
-+ "%s: timed out waiting for DMA FIFO to empty\n",
-+ ep->ep.name);
-+ return -ETIMEDOUT;
-+ }
++/* Bit manipulation macros */
++#define PSIF_BIT(name) \
++ (1 << PSIF_##name##_OFFSET)
++#define PSIF_BF(name, value) \
++ (((value) & ((1 << PSIF_##name##_SIZE) - 1)) \
++ << PSIF_##name##_OFFSET)
++#define PSIF_BFEXT(name, value)\
++ (((value) >> PSIF_##name##_OFFSET) \
++ & ((1 << PSIF_##name##_SIZE) - 1))
++#define PSIF_BFINS(name, value, old) \
++ (((old) & ~(((1 << PSIF_##name##_SIZE) - 1) \
++ << PSIF_##name##_OFFSET)) \
++ | PSIF_BF(name, value))
+
-+ return 0;
-+}
++/* Register access macros */
++#define psif_readl(port, reg) \
++ __raw_readl((port)->regs + PSIF_##reg)
++#define psif_writel(port, reg, value) \
++ __raw_writel((value), (port)->regs + PSIF_##reg)
+
-+static int usba_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
-+{
-+ struct usba_ep *ep = to_usba_ep(_ep);
-+ struct usba_udc *udc = ep->udc;
-+ struct usba_request *req = to_usba_req(_req);
-+ unsigned long flags;
-+ u32 status;
++#endif /* _AT32PSIF_H */
+--- a/drivers/misc/Kconfig
++++ b/drivers/misc/Kconfig
+@@ -22,6 +22,39 @@ config ATMEL_PWM
+ purposes including software controlled power-efficent backlights
+ on LCD displays, motor control, and waveform generation.
+
++config ATMEL_TCLIB
++ bool "Atmel AT32/AT91 Timer/Counter Library"
++ depends on (AVR32 || ARCH_AT91)
++ help
++ Select this if you want a library to allocate the Timer/Counter
++ blocks found on many Atmel processors. This facilitates using
++ these blocks by different drivers despite processor differences.
++
++config ATMEL_TCB_CLKSRC
++ bool "TC Block Clocksource"
++ depends on ATMEL_TCLIB && GENERIC_TIME
++ default y
++ help
++ Select this to get a high precision clocksource based on a
++ TC block with a 5+ MHz base clock rate. Two timer channels
++ are combined to make a single 32-bit timer.
++
++ When GENERIC_CLOCKEVENTS is defined, the third timer channel
++ may be used as a clock event device supporting oneshot mode
++ (delays of up to two seconds) based on the 32 KiHz clock.
++
++config ATMEL_TCB_CLKSRC_BLOCK
++ int
++ depends on ATMEL_TCB_CLKSRC
++ prompt "TC Block" if ARCH_AT91RM9200 || ARCH_AT91SAM9260 || CPU_AT32AP700X
++ default 0
++ range 0 1
++ help
++ Some chips provide more than one TC block, so you have the
++ choice of which one to use for the clock framework. The other
++ TC can be used for other purposes, such as PWM generation and
++ interval timing.
++
+ config IBM_ASM
+ tristate "Device driver for IBM RSA service processor"
+ depends on X86 && PCI && INPUT && EXPERIMENTAL
+--- a/drivers/misc/Makefile
++++ b/drivers/misc/Makefile
+@@ -10,6 +10,7 @@ obj-$(CONFIG_ACER_WMI) += acer-wmi.o
+ obj-$(CONFIG_ASUS_LAPTOP) += asus-laptop.o
+ obj-$(CONFIG_ATMEL_PWM) += atmel_pwm.o
+ obj-$(CONFIG_ATMEL_SSC) += atmel-ssc.o
++obj-$(CONFIG_ATMEL_TCLIB) += atmel_tclib.o
+ obj-$(CONFIG_TC1100_WMI) += tc1100-wmi.o
+ obj-$(CONFIG_LKDTM) += lkdtm.o
+ obj-$(CONFIG_TIFM_CORE) += tifm_core.o
+--- /dev/null
++++ b/drivers/misc/atmel_tclib.c
+@@ -0,0 +1,161 @@
++#include <linux/atmel_tc.h>
++#include <linux/clk.h>
++#include <linux/err.h>
++#include <linux/init.h>
++#include <linux/io.h>
++#include <linux/ioport.h>
++#include <linux/kernel.h>
++#include <linux/platform_device.h>
+
-+ DBG(DBG_GADGET | DBG_QUEUE, "ep_dequeue: %s, req %p\n",
-+ ep->ep.name, req);
++/* Number of bytes to reserve for the iomem resource */
++#define ATMEL_TC_IOMEM_SIZE 256
+
-+ spin_lock_irqsave(&udc->lock, flags);
+
-+ if (req->using_dma) {
-+ /*
-+ * If this request is currently being transferred,
-+ * stop the DMA controller and reset the FIFO.
-+ */
-+ if (ep->queue.next == &req->queue) {
-+ status = usba_dma_readl(ep, STATUS);
-+ if (status & USBA_DMA_CH_EN)
-+ stop_dma(ep, &status);
++/*
++ * This is a thin library to solve the problem of how to portably allocate
++ * one of the TC blocks. For simplicity, it doesn't currently expect to
++ * share individual timers between different drivers.
++ */
++
++#if defined(CONFIG_AVR32)
++/* AVR32 has these divide PBB */
++const u8 atmel_tc_divisors[5] = { 0, 4, 8, 16, 32, };
++EXPORT_SYMBOL(atmel_tc_divisors);
++
++#elif defined(CONFIG_ARCH_AT91)
++/* AT91 has these divide MCK */
++const u8 atmel_tc_divisors[5] = { 2, 8, 32, 128, 0, };
++EXPORT_SYMBOL(atmel_tc_divisors);
+
-+#ifdef CONFIG_USB_GADGET_DEBUG_FS
-+ ep->last_dma_status = status;
+#endif
+
-+ usba_writel(udc, EPT_RST, 1 << ep->index);
++static DEFINE_SPINLOCK(tc_list_lock);
++static LIST_HEAD(tc_list);
++
++/**
++ * atmel_tc_alloc - allocate a specified TC block
++ * @block: which block to allocate
++ * @name: name to be associated with the iomem resource
++ *
++ * Caller allocates a block. If it is available, a pointer to a
++ * pre-initialized struct atmel_tc is returned. The caller can access
++ * the registers directly through the "regs" field.
++ */
++struct atmel_tc *atmel_tc_alloc(unsigned block, const char *name)
++{
++ struct atmel_tc *tc;
++ struct platform_device *pdev = NULL;
++ struct resource *r;
+
-+ usba_update_req(ep, req, status);
++ spin_lock(&tc_list_lock);
++ list_for_each_entry(tc, &tc_list, node) {
++ if (tc->pdev->id == block) {
++ pdev = tc->pdev;
++ break;
+ }
+ }
+
-+ /*
-+ * Errors should stop the queue from advancing until the
-+ * completion function returns.
-+ */
-+ list_del_init(&req->queue);
++ if (!pdev || tc->iomem)
++ goto fail;
+
-+ request_complete(ep, req, -ECONNRESET);
++ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ r = request_mem_region(r->start, ATMEL_TC_IOMEM_SIZE, name);
++ if (!r)
++ goto fail;
+
-+ /* Process the next request if any */
-+ submit_next_request(ep);
-+ spin_unlock_irqrestore(&udc->lock, flags);
++ tc->regs = ioremap(r->start, ATMEL_TC_IOMEM_SIZE);
++ if (!tc->regs)
++ goto fail_ioremap;
+
-+ return 0;
++ tc->iomem = r;
++
++out:
++ spin_unlock(&tc_list_lock);
++ return tc;
++
++fail_ioremap:
++ release_resource(r);
++fail:
++ tc = NULL;
++ goto out;
++}
++EXPORT_SYMBOL_GPL(atmel_tc_alloc);
++
++/**
++ * atmel_tc_free - release a specified TC block
++ * @tc: Timer/counter block that was returned by atmel_tc_alloc()
++ *
++ * This reverses the effect of atmel_tc_alloc(), unmapping the I/O
++ * registers, invalidating the resource returned by that routine and
++ * making the TC available to other drivers.
++ */
++void atmel_tc_free(struct atmel_tc *tc)
++{
++ spin_lock(&tc_list_lock);
++ if (tc->regs) {
++ iounmap(tc->regs);
++ release_resource(tc->iomem);
++ tc->regs = NULL;
++ tc->iomem = NULL;
++ }
++ spin_unlock(&tc_list_lock);
+}
++EXPORT_SYMBOL_GPL(atmel_tc_free);
+
-+static int usba_ep_set_halt(struct usb_ep *_ep, int value)
++static int __init tc_probe(struct platform_device *pdev)
+{
-+ struct usba_ep *ep = to_usba_ep(_ep);
-+ struct usba_udc *udc = ep->udc;
-+ unsigned long flags;
-+ int ret = 0;
++ struct atmel_tc *tc;
++ struct clk *clk;
++ int irq;
+
-+ DBG(DBG_GADGET, "endpoint %s: %s HALT\n", ep->ep.name,
-+ value ? "set" : "clear");
++ if (!platform_get_resource(pdev, IORESOURCE_MEM, 0))
++ return -EINVAL;
+
-+ if (!ep->desc) {
-+ DBG(DBG_ERR, "Attempted to halt uninitialized ep %s\n",
-+ ep->ep.name);
-+ return -ENODEV;
-+ }
-+ if (ep->is_isoc) {
-+ DBG(DBG_ERR, "Attempted to halt isochronous ep %s\n",
-+ ep->ep.name);
-+ return -ENOTTY;
-+ }
++ irq = platform_get_irq(pdev, 0);
++ if (irq < 0)
++ return -EINVAL;
+
-+ spin_lock_irqsave(&udc->lock, flags);
++ tc = kzalloc(sizeof(struct atmel_tc), GFP_KERNEL);
++ if (!tc)
++ return -ENOMEM;
+
-+ /*
-+ * We can't halt IN endpoints while there are still data to be
-+ * transferred
-+ */
-+ if (!list_empty(&ep->queue)
-+ || ((value && ep->is_in && (usba_ep_readl(ep, STA)
-+ & USBA_BF(BUSY_BANKS, -1L))))) {
-+ ret = -EAGAIN;
-+ } else {
-+ if (value)
-+ usba_ep_writel(ep, SET_STA, USBA_FORCE_STALL);
-+ else
-+ usba_ep_writel(ep, CLR_STA,
-+ USBA_FORCE_STALL | USBA_TOGGLE_CLR);
-+ usba_ep_readl(ep, STA);
++ tc->pdev = pdev;
++
++ clk = clk_get(&pdev->dev, "t0_clk");
++ if (IS_ERR(clk)) {
++ kfree(tc);
++ return -EINVAL;
+ }
+
-+ spin_unlock_irqrestore(&udc->lock, flags);
++ tc->clk[0] = clk;
++ tc->clk[1] = clk_get(&pdev->dev, "t1_clk");
++ if (IS_ERR(tc->clk[1]))
++ tc->clk[1] = clk;
++ tc->clk[2] = clk_get(&pdev->dev, "t2_clk");
++ if (IS_ERR(tc->clk[2]))
++ tc->clk[2] = clk;
++
++ tc->irq[0] = irq;
++ tc->irq[1] = platform_get_irq(pdev, 1);
++ if (tc->irq[1] < 0)
++ tc->irq[1] = irq;
++ tc->irq[2] = platform_get_irq(pdev, 2);
++ if (tc->irq[2] < 0)
++ tc->irq[2] = irq;
++
++ spin_lock(&tc_list_lock);
++ list_add_tail(&tc->node, &tc_list);
++ spin_unlock(&tc_list_lock);
+
-+ return ret;
++ return 0;
+}
+
-+static int usba_ep_fifo_status(struct usb_ep *_ep)
-+{
-+ struct usba_ep *ep = to_usba_ep(_ep);
++static struct platform_driver tc_driver = {
++ .driver.name = "atmel_tcb",
++};
+
-+ return USBA_BFEXT(BYTE_COUNT, usba_ep_readl(ep, STA));
++static int __init tc_init(void)
++{
++ return platform_driver_probe(&tc_driver, tc_probe);
+}
++arch_initcall(tc_init);
+--- a/drivers/mmc/host/Kconfig
++++ b/drivers/mmc/host/Kconfig
+@@ -91,6 +91,16 @@ config MMC_AT91
+
+ If unsure, say N.
+
++config MMC_ATMELMCI
++ tristate "Atmel Multimedia Card Interface support"
++ depends on AVR32 && MMC
++ help
++ This selects the Atmel Multimedia Card Interface. If you have
++ a AT91 (ARM) or AT32 (AVR32) platform with a Multimedia Card
++ slot, say Y or M here.
+
-+static void usba_ep_fifo_flush(struct usb_ep *_ep)
-+{
-+ struct usba_ep *ep = to_usba_ep(_ep);
-+ struct usba_udc *udc = ep->udc;
++ If unsure, say N.
+
-+ usba_writel(udc, EPT_RST, 1 << ep->index);
-+}
+ config MMC_IMX
+ tristate "Motorola i.MX Multimedia Card Interface support"
+ depends on ARCH_IMX
+--- a/drivers/mmc/host/Makefile
++++ b/drivers/mmc/host/Makefile
+@@ -15,6 +15,7 @@ obj-$(CONFIG_MMC_WBSD) += wbsd.o
+ obj-$(CONFIG_MMC_AU1X) += au1xmmc.o
+ obj-$(CONFIG_MMC_OMAP) += omap.o
+ obj-$(CONFIG_MMC_AT91) += at91_mci.o
++obj-$(CONFIG_MMC_ATMELMCI) += atmel-mci.o
+ obj-$(CONFIG_MMC_TIFM_SD) += tifm_sd.o
+ obj-$(CONFIG_MMC_SPI) += mmc_spi.o
+ obj-$(CONFIG_GPIOMMC) += gpiommc.o
+--- /dev/null
++++ b/drivers/mmc/host/atmel-mci.c
+@@ -0,0 +1,1234 @@
++/*
++ * Atmel MultiMedia Card Interface driver
++ *
++ * Copyright (C) 2004-2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#include <linux/blkdev.h>
++#include <linux/clk.h>
++#include <linux/device.h>
++#include <linux/dma-mapping.h>
++#include <linux/init.h>
++#include <linux/interrupt.h>
++#include <linux/ioport.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
+
-+static const struct usb_ep_ops usba_ep_ops = {
-+ .enable = usba_ep_enable,
-+ .disable = usba_ep_disable,
-+ .alloc_request = usba_ep_alloc_request,
-+ .free_request = usba_ep_free_request,
-+ .queue = usba_ep_queue,
-+ .dequeue = usba_ep_dequeue,
-+ .set_halt = usba_ep_set_halt,
-+ .fifo_status = usba_ep_fifo_status,
-+ .fifo_flush = usba_ep_fifo_flush,
-+};
++#include <linux/mmc/host.h>
+
-+static int usba_udc_get_frame(struct usb_gadget *gadget)
-+{
-+ struct usba_udc *udc = to_usba_udc(gadget);
++#include <asm/dma-controller.h>
++#include <asm/io.h>
++#include <asm/arch/board.h>
++#include <asm/arch/gpio.h>
+
-+ return USBA_BFEXT(FRAME_NUMBER, usba_readl(udc, FNUM));
-+}
++#include "atmel-mci.h"
+
-+static const struct usb_gadget_ops usba_udc_ops = {
-+ .get_frame = usba_udc_get_frame,
-+};
++#define DRIVER_NAME "atmel_mci"
+
-+#define EP(nam, idx, maxpkt, maxbk, dma, isoc) \
-+{ \
-+ .ep = { \
-+ .ops = &usba_ep_ops, \
-+ .name = nam, \
-+ .maxpacket = maxpkt, \
-+ }, \
-+ .udc = &the_udc, \
-+ .queue = LIST_HEAD_INIT(usba_ep[idx].queue), \
-+ .fifo_size = maxpkt, \
-+ .nr_banks = maxbk, \
-+ .index = idx, \
-+ .can_dma = dma, \
-+ .can_isoc = isoc, \
-+}
-+
-+static struct usba_ep usba_ep[] = {
-+ EP("ep0", 0, 64, 1, 0, 0),
-+ EP("ep1in-bulk", 1, 512, 2, 1, 1),
-+ EP("ep2out-bulk", 2, 512, 2, 1, 1),
-+ EP("ep3in-int", 3, 64, 3, 1, 0),
-+ EP("ep4out-int", 4, 64, 3, 1, 0),
-+ EP("ep5in-iso", 5, 1024, 3, 1, 1),
-+ EP("ep6out-iso", 6, 1024, 3, 1, 1),
++#define MCI_DATA_ERROR_FLAGS (MCI_BIT(DCRCE) | MCI_BIT(DTOE) | \
++ MCI_BIT(OVRE) | MCI_BIT(UNRE))
++
++enum {
++ EVENT_CMD_COMPLETE = 0,
++ EVENT_DATA_COMPLETE,
++ EVENT_DATA_ERROR,
++ EVENT_STOP_SENT,
++ EVENT_STOP_COMPLETE,
++ EVENT_DMA_COMPLETE,
++ EVENT_DMA_ERROR,
+};
-+#undef EP
+
-+static struct usb_endpoint_descriptor usba_ep0_desc = {
-+ .bLength = USB_DT_ENDPOINT_SIZE,
-+ .bDescriptorType = USB_DT_ENDPOINT,
-+ .bEndpointAddress = 0,
-+ .bmAttributes = USB_ENDPOINT_XFER_CONTROL,
-+ .wMaxPacketSize = __constant_cpu_to_le16(64),
-+ /* FIXME: I have no idea what to put here */
-+ .bInterval = 1,
++struct atmel_mci_dma {
++ struct dma_request_sg req;
++ unsigned short rx_periph_id;
++ unsigned short tx_periph_id;
+};
+
-+static void nop_release(struct device *dev)
-+{
++struct atmel_mci {
++ struct mmc_host *mmc;
++ void __iomem *regs;
++ struct atmel_mci_dma dma;
+
-+}
++ struct mmc_request *mrq;
++ struct mmc_command *cmd;
++ struct mmc_data *data;
+
-+static struct usba_udc the_udc = {
-+ .gadget = {
-+ .ops = &usba_udc_ops,
-+ .ep0 = &usba_ep[0].ep,
-+ .ep_list = LIST_HEAD_INIT(the_udc.gadget.ep_list),
-+ .is_dualspeed = 1,
-+ .name = "atmel_usba_udc",
-+ .dev = {
-+ .bus_id = "gadget",
-+ .release = nop_release,
-+ },
-+ },
++ u32 cmd_status;
++ u32 data_status;
++ u32 stop_status;
++ u32 stop_cmdr;
+
-+ .lock = SPIN_LOCK_UNLOCKED,
-+};
++ struct tasklet_struct tasklet;
++ unsigned long pending_events;
++ unsigned long completed_events;
+
-+/*
-+ * Called with interrupts disabled and udc->lock held.
-+ */
-+static void reset_all_endpoints(struct usba_udc *udc)
-+{
-+ struct usba_ep *ep;
-+ struct usba_request *req, *tmp_req;
++ int present;
++ int detect_pin;
++ int wp_pin;
+
-+ usba_writel(udc, EPT_RST, ~0UL);
++ /* For detect pin debouncing */
++ struct timer_list detect_timer;
+
-+ ep = to_usba_ep(udc->gadget.ep0);
-+ list_for_each_entry_safe(req, tmp_req, &ep->queue, queue) {
-+ list_del_init(&req->queue);
-+ request_complete(ep, req, -ECONNRESET);
-+ }
++ unsigned long bus_hz;
++ unsigned long mapbase;
++ struct clk *mck;
++ struct platform_device *pdev;
+
-+ list_for_each_entry(ep, &udc->gadget.ep_list, ep.ep_list) {
-+ if (ep->desc)
-+ usba_ep_disable(&ep->ep);
-+ }
-+}
++ int pending_stop;
++#ifdef CONFIG_DEBUG_FS
++ struct dentry *debugfs_root;
++ struct dentry *debugfs_regs;
++ struct dentry *debugfs_req;
++ struct dentry *debugfs_pending_events;
++ struct dentry *debugfs_completed_events;
++#endif
++};
+
-+static struct usba_ep *get_ep_by_addr(struct usba_udc *udc, u16 wIndex)
-+{
-+ struct usba_ep *ep;
++/* Those printks take an awful lot of time... */
++#ifndef DEBUG
++static unsigned int fmax = 15000000U;
++#else
++static unsigned int fmax = 1000000U;
++#endif
++module_param(fmax, uint, 0444);
++MODULE_PARM_DESC(fmax, "Max frequency in Hz of the MMC bus clock");
+
-+ if ((wIndex & USB_ENDPOINT_NUMBER_MASK) == 0)
-+ return to_usba_ep(udc->gadget.ep0);
++/* Test bit macros for completed events */
++#define mci_cmd_is_complete(host) \
++ test_bit(EVENT_CMD_COMPLETE, &host->completed_events)
++#define mci_data_is_complete(host) \
++ test_bit(EVENT_DATA_COMPLETE, &host->completed_events)
++#define mci_data_error_is_complete(host) \
++ test_bit(EVENT_DATA_ERROR, &host->completed_events)
++#define mci_stop_sent_is_complete(host) \
++ test_bit(EVENT_STOP_SENT, &host->completed_events)
++#define mci_stop_is_complete(host) \
++ test_bit(EVENT_STOP_COMPLETE, &host->completed_events)
++#define mci_dma_is_complete(host) \
++ test_bit(EVENT_DMA_COMPLETE, &host->completed_events)
++#define mci_dma_error_is_complete(host) \
++ test_bit(EVENT_DMA_ERROR, &host->completed_events)
+
-+ list_for_each_entry (ep, &udc->gadget.ep_list, ep.ep_list) {
-+ u8 bEndpointAddress;
++/* Test and clear bit macros for pending events */
++#define mci_clear_cmd_is_pending(host) \
++ test_and_clear_bit(EVENT_CMD_COMPLETE, &host->pending_events)
++#define mci_clear_data_is_pending(host) \
++ test_and_clear_bit(EVENT_DATA_COMPLETE, &host->pending_events)
++#define mci_clear_data_error_is_pending(host) \
++ test_and_clear_bit(EVENT_DATA_ERROR, &host->pending_events)
++#define mci_clear_stop_sent_is_pending(host) \
++ test_and_clear_bit(EVENT_STOP_SENT, &host->pending_events)
++#define mci_clear_stop_is_pending(host) \
++ test_and_clear_bit(EVENT_STOP_COMPLETE, &host->pending_events)
++#define mci_clear_dma_error_is_pending(host) \
++ test_and_clear_bit(EVENT_DMA_ERROR, &host->pending_events)
+
-+ if (!ep->desc)
-+ continue;
-+ bEndpointAddress = ep->desc->bEndpointAddress;
-+ if ((wIndex ^ bEndpointAddress) & USB_DIR_IN)
-+ continue;
-+ if ((bEndpointAddress & USB_ENDPOINT_NUMBER_MASK)
-+ == (wIndex & USB_ENDPOINT_NUMBER_MASK))
-+ return ep;
-+ }
++/* Test and set bit macros for completed events */
++#define mci_set_cmd_is_completed(host) \
++ test_and_set_bit(EVENT_CMD_COMPLETE, &host->completed_events)
++#define mci_set_data_is_completed(host) \
++ test_and_set_bit(EVENT_DATA_COMPLETE, &host->completed_events)
++#define mci_set_data_error_is_completed(host) \
++ test_and_set_bit(EVENT_DATA_ERROR, &host->completed_events)
++#define mci_set_stop_sent_is_completed(host) \
++ test_and_set_bit(EVENT_STOP_SENT, &host->completed_events)
++#define mci_set_stop_is_completed(host) \
++ test_and_set_bit(EVENT_STOP_COMPLETE, &host->completed_events)
++#define mci_set_dma_error_is_completed(host) \
++ test_and_set_bit(EVENT_DMA_ERROR, &host->completed_events)
+
-+ return NULL;
-+}
++/* Set bit macros for completed events */
++#define mci_set_cmd_complete(host) \
++ set_bit(EVENT_CMD_COMPLETE, &host->completed_events)
++#define mci_set_data_complete(host) \
++ set_bit(EVENT_DATA_COMPLETE, &host->completed_events)
++#define mci_set_data_error_complete(host) \
++ set_bit(EVENT_DATA_ERROR, &host->completed_events)
++#define mci_set_stop_sent_complete(host) \
++ set_bit(EVENT_STOP_SENT, &host->completed_events)
++#define mci_set_stop_complete(host) \
++ set_bit(EVENT_STOP_COMPLETE, &host->completed_events)
++#define mci_set_dma_complete(host) \
++ set_bit(EVENT_DMA_COMPLETE, &host->completed_events)
++#define mci_set_dma_error_complete(host) \
++ set_bit(EVENT_DMA_ERROR, &host->completed_events)
+
-+/* Called with interrupts disabled and udc->lock held */
-+static inline void set_protocol_stall(struct usba_udc *udc, struct usba_ep *ep)
-+{
-+ usba_ep_writel(ep, SET_STA, USBA_FORCE_STALL);
-+ ep->state = WAIT_FOR_SETUP;
-+}
++/* Set bit macros for pending events */
++#define mci_set_cmd_pending(host) \
++ set_bit(EVENT_CMD_COMPLETE, &host->pending_events)
++#define mci_set_data_pending(host) \
++ set_bit(EVENT_DATA_COMPLETE, &host->pending_events)
++#define mci_set_data_error_pending(host) \
++ set_bit(EVENT_DATA_ERROR, &host->pending_events)
++#define mci_set_stop_sent_pending(host) \
++ set_bit(EVENT_STOP_SENT, &host->pending_events)
++#define mci_set_stop_pending(host) \
++ set_bit(EVENT_STOP_COMPLETE, &host->pending_events)
++#define mci_set_dma_error_pending(host) \
++ set_bit(EVENT_DMA_ERROR, &host->pending_events)
+
-+static inline int is_stalled(struct usba_udc *udc, struct usba_ep *ep)
-+{
-+ if (usba_ep_readl(ep, STA) & USBA_FORCE_STALL)
-+ return 1;
-+ return 0;
-+}
++/* Clear bit macros for pending events */
++#define mci_clear_cmd_pending(host) \
++ clear_bit(EVENT_CMD_COMPLETE, &host->pending_events)
++#define mci_clear_data_pending(host) \
++ clear_bit(EVENT_DATA_COMPLETE, &host->pending_events)
++#define mci_clear_data_error_pending(host) \
++ clear_bit(EVENT_DATA_ERROR, &host->pending_events)
++#define mci_clear_stop_sent_pending(host) \
++ clear_bit(EVENT_STOP_SENT, &host->pending_events)
++#define mci_clear_stop_pending(host) \
++ clear_bit(EVENT_STOP_COMPLETE, &host->pending_events)
++#define mci_clear_dma_error_pending(host) \
++ clear_bit(EVENT_DMA_ERROR, &host->pending_events)
+
-+static inline void set_address(struct usba_udc *udc, unsigned int addr)
-+{
-+ u32 regval;
+
-+ DBG(DBG_BUS, "setting address %u...\n", addr);
-+ regval = usba_readl(udc, CTRL);
-+ regval = USBA_BFINS(DEV_ADDR, addr, regval);
-+ usba_writel(udc, CTRL, regval);
-+}
++#ifdef CONFIG_DEBUG_FS
++#include <linux/debugfs.h>
++
++#define DBG_REQ_BUF_SIZE (4096 - sizeof(unsigned int))
++
++struct req_dbg_data {
++ unsigned int nbytes;
++ char str[DBG_REQ_BUF_SIZE];
++};
+
-+static int do_test_mode(struct usba_udc *udc)
++static int req_dbg_open(struct inode *inode, struct file *file)
+{
-+ static const char test_packet_buffer[] = {
-+ /* JKJKJKJK * 9 */
-+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-+ /* JJKKJJKK * 8 */
-+ 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA,
-+ /* JJKKJJKK * 8 */
-+ 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE,
-+ /* JJJJJJJKKKKKKK * 8 */
-+ 0xFE, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
-+ 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
-+ /* JJJJJJJK * 8 */
-+ 0x7F, 0xBF, 0xDF, 0xEF, 0xF7, 0xFB, 0xFD,
-+ /* {JKKKKKKK * 10}, JK */
-+ 0xFC, 0x7E, 0xBF, 0xDF, 0xEF, 0xF7, 0xFB, 0xFD, 0x7E
-+ };
-+ struct usba_ep *ep;
-+ struct device *dev = &udc->pdev->dev;
-+ int test_mode;
++ struct atmel_mci *host;
++ struct mmc_request *mrq;
++ struct mmc_command *cmd, *stop;
++ struct mmc_data *data;
++ struct req_dbg_data *priv;
++ char *str;
++ unsigned long n = 0;
+
-+ test_mode = udc->test_mode;
++ priv = kzalloc(DBG_REQ_BUF_SIZE, GFP_KERNEL);
++ if (!priv)
++ return -ENOMEM;
++ str = priv->str;
+
-+ /* Start from a clean slate */
-+ reset_all_endpoints(udc);
++ mutex_lock(&inode->i_mutex);
++ host = inode->i_private;
+
-+ switch (test_mode) {
-+ case 0x0100:
-+ /* Test_J */
-+ usba_writel(udc, TST, USBA_TST_J_MODE);
-+ dev_info(dev, "Entering Test_J mode...\n");
-+ break;
-+ case 0x0200:
-+ /* Test_K */
-+ usba_writel(udc, TST, USBA_TST_K_MODE);
-+ dev_info(dev, "Entering Test_K mode...\n");
-+ break;
-+ case 0x0300:
-+ /*
-+ * Test_SE0_NAK: Force high-speed mode and set up ep0
-+ * for Bulk IN transfers
-+ */
-+ ep = &usba_ep[0];
-+ usba_writel(udc, TST,
-+ USBA_BF(SPEED_CFG, USBA_SPEED_CFG_FORCE_HIGH));
-+ usba_ep_writel(ep, CFG,
-+ USBA_BF(EPT_SIZE, USBA_EPT_SIZE_64)
-+ | USBA_EPT_DIR_IN
-+ | USBA_BF(EPT_TYPE, USBA_EPT_TYPE_BULK)
-+ | USBA_BF(BK_NUMBER, 1));
-+ if (!(usba_ep_readl(ep, CFG) & USBA_EPT_MAPPED)) {
-+ set_protocol_stall(udc, ep);
-+ dev_err(dev, "Test_SE0_NAK: ep0 not mapped\n");
-+ } else {
-+ usba_ep_writel(ep, CTL_ENB, USBA_EPT_ENABLE);
-+ dev_info(dev, "Entering Test_SE0_NAK mode...\n");
-+ }
-+ break;
-+ case 0x0400:
-+ /* Test_Packet */
-+ ep = &usba_ep[0];
-+ usba_ep_writel(ep, CFG,
-+ USBA_BF(EPT_SIZE, USBA_EPT_SIZE_64)
-+ | USBA_EPT_DIR_IN
-+ | USBA_BF(EPT_TYPE, USBA_EPT_TYPE_BULK)
-+ | USBA_BF(BK_NUMBER, 1));
-+ if (!(usba_ep_readl(ep, CFG) & USBA_EPT_MAPPED)) {
-+ set_protocol_stall(udc, ep);
-+ dev_err(dev, "Test_Packet: ep0 not mapped\n");
-+ } else {
-+ usba_ep_writel(ep, CTL_ENB, USBA_EPT_ENABLE);
-+ usba_writel(udc, TST, USBA_TST_PKT_MODE);
-+ copy_to_fifo(ep->fifo, test_packet_buffer,
-+ sizeof(test_packet_buffer));
-+ usba_ep_writel(ep, SET_STA, USBA_TX_PK_RDY);
-+ dev_info(dev, "Entering Test_Packet mode...\n");
-+ }
-+ break;
-+ default:
-+ dev_err(dev, "Invalid test mode: 0x%04x\n", test_mode);
-+ return -EINVAL;
++ spin_lock_irq(&host->mmc->lock);
++ mrq = host->mrq;
++ if (mrq) {
++ cmd = mrq->cmd;
++ data = mrq->data;
++ stop = mrq->stop;
++ n = snprintf(str, DBG_REQ_BUF_SIZE,
++ "CMD%u(0x%x) %x %x %x %x %x (err %u)\n",
++ cmd->opcode, cmd->arg, cmd->flags,
++ cmd->resp[0], cmd->resp[1], cmd->resp[2],
++ cmd->resp[3], cmd->error);
++ if (n < DBG_REQ_BUF_SIZE && data)
++ n += snprintf(str + n, DBG_REQ_BUF_SIZE - n,
++ "DATA %u * %u (%u) %x (err %u)\n",
++ data->blocks, data->blksz,
++ data->bytes_xfered, data->flags,
++ data->error);
++ if (n < DBG_REQ_BUF_SIZE && stop)
++ n += snprintf(str + n, DBG_REQ_BUF_SIZE - n,
++ "CMD%u(0x%x) %x %x %x %x %x (err %u)\n",
++ stop->opcode, stop->arg, stop->flags,
++ stop->resp[0], stop->resp[1],
++ stop->resp[2], stop->resp[3],
++ stop->error);
+ }
++ spin_unlock_irq(&host->mmc->lock);
++ mutex_unlock(&inode->i_mutex);
++
++ priv->nbytes = min(n, DBG_REQ_BUF_SIZE);
++ file->private_data = priv;
+
+ return 0;
+}
+
-+/* Avoid overly long expressions */
-+static inline bool feature_is_dev_remote_wakeup(struct usb_ctrlrequest *crq)
++static ssize_t req_dbg_read(struct file *file, char __user *buf,
++ size_t nbytes, loff_t *ppos)
+{
-+ if (crq->wValue == __constant_cpu_to_le16(USB_DEVICE_REMOTE_WAKEUP))
-+ return true;
-+ return false;
-+}
++ struct req_dbg_data *priv = file->private_data;
+
-+static inline bool feature_is_dev_test_mode(struct usb_ctrlrequest *crq)
-+{
-+ if (crq->wValue == __constant_cpu_to_le16(USB_DEVICE_TEST_MODE))
-+ return true;
-+ return false;
++ return simple_read_from_buffer(buf, nbytes, ppos,
++ priv->str, priv->nbytes);
+}
+
-+static inline bool feature_is_ep_halt(struct usb_ctrlrequest *crq)
++static int req_dbg_release(struct inode *inode, struct file *file)
+{
-+ if (crq->wValue == __constant_cpu_to_le16(USB_ENDPOINT_HALT))
-+ return true;
-+ return false;
++ kfree(file->private_data);
++ return 0;
+}
+
-+static int handle_ep0_setup(struct usba_udc *udc, struct usba_ep *ep,
-+ struct usb_ctrlrequest *crq)
-+{
-+ int retval = 0;;
-+
-+ switch (crq->bRequest) {
-+ case USB_REQ_GET_STATUS: {
-+ u16 status;
-+
-+ if (crq->bRequestType == (USB_DIR_IN | USB_RECIP_DEVICE)) {
-+ /* Self-powered, no remote wakeup */
-+ status = __constant_cpu_to_le16(1 << 0);
-+ } else if (crq->bRequestType
-+ == (USB_DIR_IN | USB_RECIP_INTERFACE)) {
-+ status = __constant_cpu_to_le16(0);
-+ } else if (crq->bRequestType
-+ == (USB_DIR_IN | USB_RECIP_ENDPOINT)) {
-+ struct usba_ep *target;
-+
-+ target = get_ep_by_addr(udc, le16_to_cpu(crq->wIndex));
-+ if (!target)
-+ goto stall;
-+
-+ status = 0;
-+ if (is_stalled(udc, target))
-+ status |= __constant_cpu_to_le16(1);
-+ } else
-+ goto delegate;
-+
-+ /* Write directly to the FIFO. No queueing is done. */
-+ if (crq->wLength != __constant_cpu_to_le16(sizeof(status)))
-+ goto stall;
-+ ep->state = DATA_STAGE_IN;
-+ __raw_writew(status, ep->fifo);
-+ usba_ep_writel(ep, SET_STA, USBA_TX_PK_RDY);
-+ break;
-+ }
-+
-+ case USB_REQ_CLEAR_FEATURE: {
-+ if (crq->bRequestType == USB_RECIP_DEVICE) {
-+ if (feature_is_dev_remote_wakeup(crq)) {
-+ /* TODO: Handle REMOTE_WAKEUP */
-+ } else {
-+ /* Can't CLEAR_FEATURE TEST_MODE */
-+ goto stall;
-+ }
-+ } else if (crq->bRequestType == USB_RECIP_ENDPOINT) {
-+ struct usba_ep *target;
-+
-+ if (crq->wLength != __constant_cpu_to_le16(0)
-+ || !feature_is_ep_halt(crq))
-+ goto stall;
-+ target = get_ep_by_addr(udc, le16_to_cpu(crq->wIndex));
-+ if (!target)
-+ goto stall;
-+
-+ usba_ep_writel(target, CLR_STA, USBA_FORCE_STALL);
-+ if (target->index != 0)
-+ usba_ep_writel(target, CLR_STA,
-+ USBA_TOGGLE_CLR);
-+ } else {
-+ goto delegate;
-+ }
-+
-+ send_status(udc, ep);
-+ break;
-+ }
-+
-+ case USB_REQ_SET_FEATURE: {
-+ if (crq->bRequestType == USB_RECIP_DEVICE) {
-+ if (feature_is_dev_test_mode(crq)) {
-+ send_status(udc, ep);
-+ ep->state = STATUS_STAGE_TEST;
-+ udc->test_mode = le16_to_cpu(crq->wIndex);
-+ return 0;
-+ } else if (feature_is_dev_remote_wakeup(crq)) {
-+ /* TODO: Handle REMOTE_WAKEUP */
-+ } else {
-+ goto stall;
-+ }
-+ } else if (crq->bRequestType == USB_RECIP_ENDPOINT) {
-+ struct usba_ep *target;
-+
-+ if (crq->wLength != __constant_cpu_to_le16(0)
-+ || !feature_is_ep_halt(crq))
-+ goto stall;
-+
-+ target = get_ep_by_addr(udc, le16_to_cpu(crq->wIndex));
-+ if (!target)
-+ goto stall;
-+
-+ usba_ep_writel(target, SET_STA, USBA_FORCE_STALL);
-+ } else
-+ goto delegate;
++static const struct file_operations req_dbg_fops = {
++ .owner = THIS_MODULE,
++ .open = req_dbg_open,
++ .llseek = no_llseek,
++ .read = req_dbg_read,
++ .release = req_dbg_release,
++};
+
-+ send_status(udc, ep);
-+ break;
-+ }
++static int regs_dbg_open(struct inode *inode, struct file *file)
++{
++ struct atmel_mci *host;
++ unsigned int i;
++ u32 *data;
++ int ret = -ENOMEM;
+
-+ case USB_REQ_SET_ADDRESS:
-+ if (crq->bRequestType != (USB_DIR_OUT | USB_RECIP_DEVICE))
-+ goto delegate;
++ mutex_lock(&inode->i_mutex);
++ host = inode->i_private;
++ data = kmalloc(inode->i_size, GFP_KERNEL);
++ if (!data)
++ goto out;
+
-+ set_address(udc, le16_to_cpu(crq->wValue));
-+ send_status(udc, ep);
-+ ep->state = STATUS_STAGE_ADDR;
-+ break;
++ spin_lock_irq(&host->mmc->lock);
++ for (i = 0; i < inode->i_size / 4; i++)
++ data[i] = __raw_readl(host->regs + i * 4);
++ spin_unlock_irq(&host->mmc->lock);
+
-+ default:
-+delegate:
-+ spin_unlock(&udc->lock);
-+ retval = udc->driver->setup(&udc->gadget, crq);
-+ spin_lock(&udc->lock);
-+ }
++ file->private_data = data;
++ ret = 0;
+
-+ return retval;
++out:
++ mutex_unlock(&inode->i_mutex);
+
-+stall:
-+ printk(KERN_ERR
-+ "udc: %s: Invalid setup request: %02x.%02x v%04x i%04x l%d, "
-+ "halting endpoint...\n",
-+ ep->ep.name, crq->bRequestType, crq->bRequest,
-+ le16_to_cpu(crq->wValue), le16_to_cpu(crq->wIndex),
-+ le16_to_cpu(crq->wLength));
-+ set_protocol_stall(udc, ep);
-+ return -1;
++ return ret;
+}
+
-+static void usba_control_irq(struct usba_udc *udc, struct usba_ep *ep)
++static ssize_t regs_dbg_read(struct file *file, char __user *buf,
++ size_t nbytes, loff_t *ppos)
+{
-+ struct usba_request *req;
-+ u32 epstatus;
-+ u32 epctrl;
-+
-+restart:
-+ epstatus = usba_ep_readl(ep, STA);
-+ epctrl = usba_ep_readl(ep, CTL);
-+
-+ DBG(DBG_INT, "%s [%d]: s/%08x c/%08x\n",
-+ ep->ep.name, ep->state, epstatus, epctrl);
-+
-+ req = NULL;
-+ if (!list_empty(&ep->queue))
-+ req = list_entry(ep->queue.next,
-+ struct usba_request, queue);
-+
-+ if ((epctrl & USBA_TX_PK_RDY) && !(epstatus & USBA_TX_PK_RDY)) {
-+ if (req->submitted)
-+ next_fifo_transaction(ep, req);
-+ else
-+ submit_request(ep, req);
-+
-+ if (req->last_transaction) {
-+ usba_ep_writel(ep, CTL_DIS, USBA_TX_PK_RDY);
-+ usba_ep_writel(ep, CTL_ENB, USBA_TX_COMPLETE);
-+ }
-+ goto restart;
-+ }
-+ if ((epstatus & epctrl) & USBA_TX_COMPLETE) {
-+ usba_ep_writel(ep, CLR_STA, USBA_TX_COMPLETE);
-+
-+ switch (ep->state) {
-+ case DATA_STAGE_IN:
-+ usba_ep_writel(ep, CTL_ENB, USBA_RX_BK_RDY);
-+ usba_ep_writel(ep, CTL_DIS, USBA_TX_COMPLETE);
-+ ep->state = STATUS_STAGE_OUT;
-+ break;
-+ case STATUS_STAGE_ADDR:
-+ /* Activate our new address */
-+ usba_writel(udc, CTRL, (usba_readl(udc, CTRL)
-+ | USBA_FADDR_EN));
-+ usba_ep_writel(ep, CTL_DIS, USBA_TX_COMPLETE);
-+ ep->state = WAIT_FOR_SETUP;
-+ break;
-+ case STATUS_STAGE_IN:
-+ if (req) {
-+ list_del_init(&req->queue);
-+ request_complete(ep, req, 0);
-+ submit_next_request(ep);
-+ }
-+ usba_ep_writel(ep, CTL_DIS, USBA_TX_COMPLETE);
-+ ep->state = WAIT_FOR_SETUP;
-+ break;
-+ case STATUS_STAGE_TEST:
-+ usba_ep_writel(ep, CTL_DIS, USBA_TX_COMPLETE);
-+ ep->state = WAIT_FOR_SETUP;
-+ if (do_test_mode(udc))
-+ set_protocol_stall(udc, ep);
-+ break;
-+ default:
-+ printk(KERN_ERR
-+ "udc: %s: TXCOMP: Invalid endpoint state %d, "
-+ "halting endpoint...\n",
-+ ep->ep.name, ep->state);
-+ set_protocol_stall(udc, ep);
-+ break;
-+ }
-+
-+ goto restart;
-+ }
-+ if ((epstatus & epctrl) & USBA_RX_BK_RDY) {
-+ switch (ep->state) {
-+ case STATUS_STAGE_OUT:
-+ usba_ep_writel(ep, CLR_STA, USBA_RX_BK_RDY);
-+ usba_ep_writel(ep, CTL_DIS, USBA_RX_BK_RDY);
-+
-+ if (req) {
-+ list_del_init(&req->queue);
-+ request_complete(ep, req, 0);
-+ }
-+ ep->state = WAIT_FOR_SETUP;
-+ break;
++ struct inode *inode = file->f_dentry->d_inode;
++ int ret;
+
-+ case DATA_STAGE_OUT:
-+ receive_data(ep);
-+ break;
++ mutex_lock(&inode->i_mutex);
++ ret = simple_read_from_buffer(buf, nbytes, ppos,
++ file->private_data,
++ file->f_dentry->d_inode->i_size);
++ mutex_unlock(&inode->i_mutex);
+
-+ default:
-+ usba_ep_writel(ep, CLR_STA, USBA_RX_BK_RDY);
-+ usba_ep_writel(ep, CTL_DIS, USBA_RX_BK_RDY);
-+ printk(KERN_ERR
-+ "udc: %s: RXRDY: Invalid endpoint state %d, "
-+ "halting endpoint...\n",
-+ ep->ep.name, ep->state);
-+ set_protocol_stall(udc, ep);
-+ break;
-+ }
++ return ret;
++}
+
-+ goto restart;
-+ }
-+ if (epstatus & USBA_RX_SETUP) {
-+ union {
-+ struct usb_ctrlrequest crq;
-+ unsigned long data[2];
-+ } crq;
-+ unsigned int pkt_len;
-+ int ret;
-+
-+ if (ep->state != WAIT_FOR_SETUP) {
-+ /*
-+ * Didn't expect a SETUP packet at this
-+ * point. Clean up any pending requests (which
-+ * may be successful).
-+ */
-+ int status = -EPROTO;
++static int regs_dbg_release(struct inode *inode, struct file *file)
++{
++ kfree(file->private_data);
++ return 0;
++}
+
-+ /*
-+ * RXRDY and TXCOMP are dropped when SETUP
-+ * packets arrive. Just pretend we received
-+ * the status packet.
-+ */
-+ if (ep->state == STATUS_STAGE_OUT
-+ || ep->state == STATUS_STAGE_IN) {
-+ usba_ep_writel(ep, CTL_DIS, USBA_RX_BK_RDY);
-+ status = 0;
-+ }
++static const struct file_operations regs_dbg_fops = {
++ .owner = THIS_MODULE,
++ .open = regs_dbg_open,
++ .llseek = generic_file_llseek,
++ .read = regs_dbg_read,
++ .release = regs_dbg_release,
++};
+
-+ if (req) {
-+ list_del_init(&req->queue);
-+ request_complete(ep, req, status);
-+ }
-+ }
++static void atmci_init_debugfs(struct atmel_mci *host)
++{
++ struct mmc_host *mmc;
++ struct dentry *root, *regs;
++ struct resource *res;
+
-+ pkt_len = USBA_BFEXT(BYTE_COUNT, usba_ep_readl(ep, STA));
-+ DBG(DBG_HW, "Packet length: %u\n", pkt_len);
-+ if (pkt_len != sizeof(crq)) {
-+ printk(KERN_WARNING "udc: Invalid packet length %u "
-+ "(expected %lu)\n", pkt_len, sizeof(crq));
-+ set_protocol_stall(udc, ep);
-+ return;
-+ }
++ mmc = host->mmc;
++ root = debugfs_create_dir(mmc_hostname(mmc), NULL);
++ if (IS_ERR(root) || !root)
++ goto err_root;
++ host->debugfs_root = root;
+
-+ DBG(DBG_FIFO, "Copying ctrl request from 0x%p:\n", ep->fifo);
-+ copy_from_fifo(crq.data, ep->fifo, sizeof(crq));
++ regs = debugfs_create_file("regs", 0400, root, host, ®s_dbg_fops);
++ if (!regs)
++ goto err_regs;
+
-+ /* Free up one bank in the FIFO so that we can
-+ * generate or receive a reply right away. */
-+ usba_ep_writel(ep, CLR_STA, USBA_RX_SETUP);
++ res = platform_get_resource(host->pdev, IORESOURCE_MEM, 0);
++ regs->d_inode->i_size = res->end - res->start + 1;
++ host->debugfs_regs = regs;
+
-+ /* printk(KERN_DEBUG "setup: %d: %02x.%02x\n",
-+ ep->state, crq.crq.bRequestType,
-+ crq.crq.bRequest); */
++ host->debugfs_req = debugfs_create_file("req", 0400, root,
++ host, &req_dbg_fops);
++ if (!host->debugfs_req)
++ goto err_req;
+
-+ if (crq.crq.bRequestType & USB_DIR_IN) {
-+ /*
-+ * The USB 2.0 spec states that "if wLength is
-+ * zero, there is no data transfer phase."
-+ * However, testusb #14 seems to actually
-+ * expect a data phase even if wLength = 0...
-+ */
-+ ep->state = DATA_STAGE_IN;
-+ } else {
-+ if (crq.crq.wLength != __constant_cpu_to_le16(0))
-+ ep->state = DATA_STAGE_OUT;
-+ else
-+ ep->state = STATUS_STAGE_IN;
-+ }
++ host->debugfs_pending_events
++ = debugfs_create_u32("pending_events", 0400, root,
++ (u32 *)&host->pending_events);
++ if (!host->debugfs_pending_events)
++ goto err_pending_events;
+
-+ ret = -1;
-+ if (ep->index == 0)
-+ ret = handle_ep0_setup(udc, ep, &crq.crq);
-+ else {
-+ spin_unlock(&udc->lock);
-+ ret = udc->driver->setup(&udc->gadget, &crq.crq);
-+ spin_lock(&udc->lock);
-+ }
++ host->debugfs_completed_events
++ = debugfs_create_u32("completed_events", 0400, root,
++ (u32 *)&host->completed_events);
++ if (!host->debugfs_completed_events)
++ goto err_completed_events;
+
-+ DBG(DBG_BUS, "req %02x.%02x, length %d, state %d, ret %d\n",
-+ crq.crq.bRequestType, crq.crq.bRequest,
-+ le16_to_cpu(crq.crq.wLength), ep->state, ret);
++ return;
+
-+ if (ret < 0) {
-+ /* Let the host know that we failed */
-+ set_protocol_stall(udc, ep);
-+ }
-+ }
++err_completed_events:
++ debugfs_remove(host->debugfs_pending_events);
++err_pending_events:
++ debugfs_remove(host->debugfs_req);
++err_req:
++ debugfs_remove(host->debugfs_regs);
++err_regs:
++ debugfs_remove(host->debugfs_root);
++err_root:
++ host->debugfs_root = NULL;
++ dev_err(&host->pdev->dev,
++ "failed to initialize debugfs for %s\n",
++ mmc_hostname(mmc));
+}
+
-+static void usba_ep_irq(struct usba_udc *udc, struct usba_ep *ep)
++static void atmci_cleanup_debugfs(struct atmel_mci *host)
+{
-+ struct usba_request *req;
-+ u32 epstatus;
-+ u32 epctrl;
-+
-+ epstatus = usba_ep_readl(ep, STA);
-+ epctrl = usba_ep_readl(ep, CTL);
-+
-+ DBG(DBG_INT, "%s: interrupt, status: 0x%08x\n", ep->ep.name, epstatus);
-+
-+ while ((epctrl & USBA_TX_PK_RDY) && !(epstatus & USBA_TX_PK_RDY)) {
-+ DBG(DBG_BUS, "%s: TX PK ready\n", ep->ep.name);
-+
-+ if (list_empty(&ep->queue)) {
-+ dev_warn(&udc->pdev->dev, "ep_irq: queue empty\n");
-+ usba_ep_writel(ep, CTL_DIS, USBA_TX_PK_RDY);
-+ return;
-+ }
-+
-+ req = list_entry(ep->queue.next, struct usba_request, queue);
-+
-+ if (req->using_dma) {
-+ /* Send a zero-length packet */
-+ usba_ep_writel(ep, SET_STA,
-+ USBA_TX_PK_RDY);
-+ usba_ep_writel(ep, CTL_DIS,
-+ USBA_TX_PK_RDY);
-+ list_del_init(&req->queue);
-+ submit_next_request(ep);
-+ request_complete(ep, req, 0);
-+ } else {
-+ if (req->submitted)
-+ next_fifo_transaction(ep, req);
-+ else
-+ submit_request(ep, req);
-+
-+ if (req->last_transaction) {
-+ list_del_init(&req->queue);
-+ submit_next_request(ep);
-+ request_complete(ep, req, 0);
-+ }
-+ }
-+
-+ epstatus = usba_ep_readl(ep, STA);
-+ epctrl = usba_ep_readl(ep, CTL);
-+ }
-+ if ((epstatus & epctrl) & USBA_RX_BK_RDY) {
-+ DBG(DBG_BUS, "%s: RX data ready\n", ep->ep.name);
-+ receive_data(ep);
-+ usba_ep_writel(ep, CLR_STA, USBA_RX_BK_RDY);
++ if (host->debugfs_root) {
++ debugfs_remove(host->debugfs_completed_events);
++ debugfs_remove(host->debugfs_pending_events);
++ debugfs_remove(host->debugfs_req);
++ debugfs_remove(host->debugfs_regs);
++ debugfs_remove(host->debugfs_root);
++ host->debugfs_root = NULL;
+ }
+}
-+
-+static void usba_dma_irq(struct usba_udc *udc, struct usba_ep *ep)
++#else
++static inline void atmci_init_debugfs(struct atmel_mci *host)
+{
-+ struct usba_request *req;
-+ u32 status, control, pending;
-+
-+ status = usba_dma_readl(ep, STATUS);
-+ control = usba_dma_readl(ep, CONTROL);
-+#ifdef CONFIG_USB_GADGET_DEBUG_FS
-+ ep->last_dma_status = status;
-+#endif
-+ pending = status & control;
-+ DBG(DBG_INT | DBG_DMA, "dma irq, s/%#08x, c/%#08x\n", status, control);
+
-+ if (status & USBA_DMA_CH_EN) {
-+ dev_err(&udc->pdev->dev,
-+ "DMA_CH_EN is set after transfer is finished!\n");
-+ dev_err(&udc->pdev->dev,
-+ "status=%#08x, pending=%#08x, control=%#08x\n",
-+ status, pending, control);
-+
-+ /*
-+ * try to pretend nothing happened. We might have to
-+ * do something here...
-+ */
-+ }
++}
+
-+ if (list_empty(&ep->queue))
-+ /* Might happen if a reset comes along at the right moment */
-+ return;
++static inline void atmci_cleanup_debugfs(struct atmel_mci *host)
++{
+
-+ if (pending & (USBA_DMA_END_TR_ST | USBA_DMA_END_BUF_ST)) {
-+ req = list_entry(ep->queue.next, struct usba_request, queue);
-+ usba_update_req(ep, req, status);
++}
++#endif /* CONFIG_DEBUG_FS */
+
-+ list_del_init(&req->queue);
-+ submit_next_request(ep);
-+ request_complete(ep, req, 0);
-+ }
++static inline unsigned int ns_to_clocks(struct atmel_mci *host,
++ unsigned int ns)
++{
++ return (ns * (host->bus_hz / 1000000) + 999) / 1000;
+}
+
-+static irqreturn_t usba_udc_irq(int irq, void *devid)
++static void atmci_set_timeout(struct atmel_mci *host,
++ struct mmc_data *data)
+{
-+ struct usba_udc *udc = devid;
-+ u32 status;
-+ u32 dma_status;
-+ u32 ep_status;
-+
-+ spin_lock(&udc->lock);
-+
-+ status = usba_readl(udc, INT_STA);
-+ DBG(DBG_INT, "irq, status=%#08x\n", status);
-+
-+ if (status & USBA_DET_SUSPEND) {
-+ usba_writel(udc, INT_CLR, USBA_DET_SUSPEND);
-+ DBG(DBG_BUS, "Suspend detected\n");
-+ if (udc->gadget.speed != USB_SPEED_UNKNOWN
-+ && udc->driver && udc->driver->suspend) {
-+ spin_unlock(&udc->lock);
-+ udc->driver->suspend(&udc->gadget);
-+ spin_lock(&udc->lock);
-+ }
-+ }
++ static unsigned dtomul_to_shift[] = {
++ 0, 4, 7, 8, 10, 12, 16, 20
++ };
++ unsigned timeout;
++ unsigned dtocyc, dtomul;
+
-+ if (status & USBA_WAKE_UP) {
-+ usba_writel(udc, INT_CLR, USBA_WAKE_UP);
-+ DBG(DBG_BUS, "Wake Up CPU detected\n");
-+ }
++ timeout = ns_to_clocks(host, data->timeout_ns) + data->timeout_clks;
+
-+ if (status & USBA_END_OF_RESUME) {
-+ usba_writel(udc, INT_CLR, USBA_END_OF_RESUME);
-+ DBG(DBG_BUS, "Resume detected\n");
-+ if (udc->gadget.speed != USB_SPEED_UNKNOWN
-+ && udc->driver && udc->driver->resume) {
-+ spin_unlock(&udc->lock);
-+ udc->driver->resume(&udc->gadget);
-+ spin_lock(&udc->lock);
-+ }
++ for (dtomul = 0; dtomul < 8; dtomul++) {
++ unsigned shift = dtomul_to_shift[dtomul];
++ dtocyc = (timeout + (1 << shift) - 1) >> shift;
++ if (dtocyc < 15)
++ break;
+ }
+
-+ dma_status = USBA_BFEXT(DMA_INT, status);
-+ if (dma_status) {
-+ int i;
-+
-+ for (i = 1; i < USBA_NR_ENDPOINTS; i++)
-+ if (dma_status & (1 << i))
-+ usba_dma_irq(udc, &usba_ep[i]);
++ if (dtomul >= 8) {
++ dtomul = 7;
++ dtocyc = 15;
+ }
+
-+ ep_status = USBA_BFEXT(EPT_INT, status);
-+ if (ep_status) {
-+ int i;
++ dev_dbg(&host->mmc->class_dev, "setting timeout to %u cycles\n",
++ dtocyc << dtomul_to_shift[dtomul]);
++ mci_writel(host, DTOR, (MCI_BF(DTOMUL, dtomul)
++ | MCI_BF(DTOCYC, dtocyc)));
++}
+
-+ for (i = 0; i < USBA_NR_ENDPOINTS; i++)
-+ if (ep_status & (1 << i)) {
-+ if (ep_is_control(&usba_ep[i]))
-+ usba_control_irq(udc, &usba_ep[i]);
-+ else
-+ usba_ep_irq(udc, &usba_ep[i]);
-+ }
-+ }
++/*
++ * Return mask with command flags to be enabled for this command.
++ */
++static u32 atmci_prepare_command(struct mmc_host *mmc,
++ struct mmc_command *cmd)
++{
++ u32 cmdr;
+
-+ if (status & USBA_END_OF_RESET) {
-+ struct usba_ep *ep0;
++ cmd->error = 0;
+
-+ usba_writel(udc, INT_CLR, USBA_END_OF_RESET);
-+ reset_all_endpoints(udc);
++ cmdr = MCI_BF(CMDNB, cmd->opcode);
+
-+ if (status & USBA_HIGH_SPEED) {
-+ DBG(DBG_BUS, "High-speed bus reset detected\n");
-+ udc->gadget.speed = USB_SPEED_HIGH;
-+ } else {
-+ DBG(DBG_BUS, "Full-speed bus reset detected\n");
-+ udc->gadget.speed = USB_SPEED_FULL;
-+ }
++ if (cmd->flags & MMC_RSP_PRESENT) {
++ if (cmd->flags & MMC_RSP_136)
++ cmdr |= MCI_BF(RSPTYP, MCI_RSPTYP_136_BIT);
++ else
++ cmdr |= MCI_BF(RSPTYP, MCI_RSPTYP_48_BIT);
++ }
+
-+ ep0 = &usba_ep[0];
-+ ep0->desc = &usba_ep0_desc;
-+ ep0->state = WAIT_FOR_SETUP;
-+ usba_ep_writel(ep0, CFG,
-+ (USBA_BF(EPT_SIZE, EP0_EPT_SIZE)
-+ | USBA_BF(EPT_TYPE, USBA_EPT_TYPE_CONTROL)
-+ | USBA_BF(BK_NUMBER, USBA_BK_NUMBER_ONE)));
-+ usba_ep_writel(ep0, CTL_ENB,
-+ USBA_EPT_ENABLE | USBA_RX_SETUP);
-+ usba_writel(udc, INT_ENB,
-+ (usba_readl(udc, INT_ENB)
-+ | USBA_BF(EPT_INT, 1)
-+ | USBA_DET_SUSPEND
-+ | USBA_END_OF_RESUME));
++ /*
++ * This should really be MAXLAT_5 for CMD2 and ACMD41, but
++ * it's too difficult to determine whether this is an ACMD or
++ * not. Better make it 64.
++ */
++ cmdr |= MCI_BIT(MAXLAT);
+
-+ if (!(usba_ep_readl(ep0, CFG) & USBA_EPT_MAPPED))
-+ dev_warn(&udc->pdev->dev,
-+ "WARNING: EP0 configuration is invalid!\n");
-+ }
++ if (mmc->ios.bus_mode == MMC_BUSMODE_OPENDRAIN)
++ cmdr |= MCI_BIT(OPDCMD);
+
-+ spin_unlock(&udc->lock);
++ dev_dbg(&mmc->class_dev,
++ "cmd: op %02x arg %08x flags %08x, cmdflags %08lx\n",
++ cmd->opcode, cmd->arg, cmd->flags, (unsigned long)cmdr);
+
-+ return IRQ_HANDLED;
++ return cmdr;
+}
+
-+static irqreturn_t usba_vbus_irq(int irq, void *devid)
++static void atmci_start_command(struct atmel_mci *host,
++ struct mmc_command *cmd,
++ u32 cmd_flags)
+{
-+ struct usba_udc *udc = devid;
-+ int vbus;
-+
-+ /* debounce */
-+ udelay(10);
-+
-+ spin_lock(&udc->lock);
-+
-+ /* May happen if Vbus pin toggles during probe() */
-+ if (!udc->driver)
-+ goto out;
-+
-+ vbus = gpio_get_value(udc->vbus_pin);
-+ if (vbus != udc->vbus_prev) {
-+ if (vbus) {
-+ usba_writel(udc, CTRL, USBA_EN_USBA);
-+ usba_writel(udc, INT_ENB, USBA_END_OF_RESET);
-+ } else {
-+ udc->gadget.speed = USB_SPEED_UNKNOWN;
-+ reset_all_endpoints(udc);
-+ usba_writel(udc, CTRL, 0);
-+ spin_unlock(&udc->lock);
-+ udc->driver->disconnect(&udc->gadget);
-+ spin_lock(&udc->lock);
-+ }
-+ udc->vbus_prev = vbus;
-+ }
++ WARN_ON(host->cmd);
++ host->cmd = cmd;
+
-+out:
-+ spin_unlock(&udc->lock);
++ mci_writel(host, ARGR, cmd->arg);
++ mci_writel(host, CMDR, cmd_flags);
+
-+ return IRQ_HANDLED;
++ if (cmd->data)
++ dma_start_request(host->dma.req.req.dmac,
++ host->dma.req.req.channel);
+}
+
-+int usb_gadget_register_driver(struct usb_gadget_driver *driver)
++/*
++ * Returns a mask of flags to be set in the command register when the
++ * command to start the transfer is to be sent.
++ */
++static u32 atmci_prepare_data(struct mmc_host *mmc, struct mmc_data *data)
+{
-+ struct usba_udc *udc = &the_udc;
-+ unsigned long flags;
-+ int ret;
-+
-+ if (!udc->pdev)
-+ return -ENODEV;
-+
-+ spin_lock_irqsave(&udc->lock, flags);
-+ if (udc->driver) {
-+ spin_unlock_irqrestore(&udc->lock, flags);
-+ return -EBUSY;
-+ }
-+
-+ udc->driver = driver;
-+ udc->gadget.dev.driver = &driver->driver;
-+ spin_unlock_irqrestore(&udc->lock, flags);
-+
-+ clk_enable(udc->pclk);
-+ clk_enable(udc->hclk);
++ struct atmel_mci *host = mmc_priv(mmc);
++ u32 cmd_flags;
+
-+ ret = driver->bind(&udc->gadget);
-+ if (ret) {
-+ DBG(DBG_ERR, "Could not bind to driver %s: error %d\n",
-+ driver->driver.name, ret);
-+ goto err_driver_bind;
-+ }
++ WARN_ON(host->data);
++ host->data = data;
+
-+ DBG(DBG_GADGET, "registered driver `%s'\n", driver->driver.name);
++ atmci_set_timeout(host, data);
++ mci_writel(host, BLKR, (MCI_BF(BCNT, data->blocks)
++ | MCI_BF(BLKLEN, data->blksz)));
++ host->dma.req.block_size = data->blksz;
++ host->dma.req.nr_blocks = data->blocks;
+
-+ udc->vbus_prev = 0;
-+ if (udc->vbus_pin != -1)
-+ enable_irq(gpio_to_irq(udc->vbus_pin));
++ cmd_flags = MCI_BF(TRCMD, MCI_TRCMD_START_TRANS);
++ if (data->flags & MMC_DATA_STREAM)
++ cmd_flags |= MCI_BF(TRTYP, MCI_TRTYP_STREAM);
++ else if (data->blocks > 1)
++ cmd_flags |= MCI_BF(TRTYP, MCI_TRTYP_MULTI_BLOCK);
++ else
++ cmd_flags |= MCI_BF(TRTYP, MCI_TRTYP_BLOCK);
+
-+ /* If Vbus is present, enable the controller and wait for reset */
-+ spin_lock_irqsave(&udc->lock, flags);
-+ if (vbus_is_present(udc) && udc->vbus_prev == 0) {
-+ usba_writel(udc, CTRL, USBA_EN_USBA);
-+ usba_writel(udc, INT_ENB, USBA_END_OF_RESET);
++ if (data->flags & MMC_DATA_READ) {
++ cmd_flags |= MCI_BIT(TRDIR);
++ host->dma.req.nr_sg
++ = dma_map_sg(&host->pdev->dev, data->sg,
++ data->sg_len, DMA_FROM_DEVICE);
++ host->dma.req.periph_id = host->dma.rx_periph_id;
++ host->dma.req.direction = DMA_DIR_PERIPH_TO_MEM;
++ host->dma.req.data_reg = host->mapbase + MCI_RDR;
++ } else {
++ host->dma.req.nr_sg
++ = dma_map_sg(&host->pdev->dev, data->sg,
++ data->sg_len, DMA_TO_DEVICE);
++ host->dma.req.periph_id = host->dma.tx_periph_id;
++ host->dma.req.direction = DMA_DIR_MEM_TO_PERIPH;
++ host->dma.req.data_reg = host->mapbase + MCI_TDR;
+ }
-+ spin_unlock_irqrestore(&udc->lock, flags);
++ host->dma.req.sg = data->sg;
+
-+ return 0;
++ dma_prepare_request_sg(host->dma.req.req.dmac, &host->dma.req);
+
-+err_driver_bind:
-+ udc->driver = NULL;
-+ udc->gadget.dev.driver = NULL;
-+ return ret;
++ return cmd_flags;
+}
-+EXPORT_SYMBOL(usb_gadget_register_driver);
+
-+int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
++static void atmci_request(struct mmc_host *mmc, struct mmc_request *mrq)
+{
-+ struct usba_udc *udc = &the_udc;
-+ unsigned long flags;
++ struct atmel_mci *host = mmc_priv(mmc);
++ struct mmc_data *data = mrq->data;
++ u32 iflags;
++ u32 cmdflags = 0;
+
-+ if (!udc->pdev)
-+ return -ENODEV;
-+ if (driver != udc->driver)
-+ return -EINVAL;
++ iflags = mci_readl(host, IMR);
++ if (iflags)
++ dev_warn(&mmc->class_dev, "WARNING: IMR=0x%08x\n",
++ mci_readl(host, IMR));
+
-+ if (udc->vbus_pin != -1)
-+ disable_irq(gpio_to_irq(udc->vbus_pin));
++ WARN_ON(host->mrq != NULL);
+
-+ spin_lock_irqsave(&udc->lock, flags);
-+ udc->gadget.speed = USB_SPEED_UNKNOWN;
-+ reset_all_endpoints(udc);
-+ spin_unlock_irqrestore(&udc->lock, flags);
++ /*
++ * We may "know" the card is gone even though there's still an
++ * electrical connection. If so, we really need to communicate
++ * this to the MMC core since there won't be any more
++ * interrupts as the card is completely removed. Otherwise,
++ * the MMC core might believe the card is still there even
++ * though the card was just removed very slowly.
++ */
++ if (!host->present) {
++ mrq->cmd->error = -ENOMEDIUM;
++ mmc_request_done(mmc, mrq);
++ return;
++ }
+
-+ /* This will also disable the DP pullup */
-+ usba_writel(udc, CTRL, 0);
++ host->mrq = mrq;
++ host->pending_events = 0;
++ host->completed_events = 0;
+
-+ driver->unbind(&udc->gadget);
-+ udc->gadget.dev.driver = NULL;
-+ udc->driver = NULL;
++ iflags = MCI_BIT(CMDRDY);
++ cmdflags = atmci_prepare_command(mmc, mrq->cmd);
+
-+ clk_disable(udc->hclk);
-+ clk_disable(udc->pclk);
++ if (mrq->stop) {
++ WARN_ON(!data);
+
-+ DBG(DBG_GADGET, "unregistered driver `%s'\n", driver->driver.name);
++ host->stop_cmdr = atmci_prepare_command(mmc, mrq->stop);
++ host->stop_cmdr |= MCI_BF(TRCMD, MCI_TRCMD_STOP_TRANS);
++ if (!(data->flags & MMC_DATA_WRITE))
++ host->stop_cmdr |= MCI_BIT(TRDIR);
++ if (data->flags & MMC_DATA_STREAM)
++ host->stop_cmdr |= MCI_BF(TRTYP, MCI_TRTYP_STREAM);
++ else
++ host->stop_cmdr |= MCI_BF(TRTYP, MCI_TRTYP_MULTI_BLOCK);
++ }
++ if (data) {
++ cmdflags |= atmci_prepare_data(mmc, data);
++ iflags |= MCI_DATA_ERROR_FLAGS;
++ }
+
-+ return 0;
++ atmci_start_command(host, mrq->cmd, cmdflags);
++ mci_writel(host, IER, iflags);
+}
-+EXPORT_SYMBOL(usb_gadget_unregister_driver);
+
-+static int __init usba_udc_probe(struct platform_device *pdev)
++static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
-+ struct usba_platform_data *pdata = pdev->dev.platform_data;
-+ struct resource *regs, *fifo;
-+ struct clk *pclk, *hclk;
-+ struct usba_udc *udc = &the_udc;
-+ int irq, ret, i;
-+
-+ regs = platform_get_resource(pdev, IORESOURCE_MEM, CTRL_IOMEM_ID);
-+ fifo = platform_get_resource(pdev, IORESOURCE_MEM, FIFO_IOMEM_ID);
-+ if (!regs || !fifo)
-+ return -ENXIO;
++ struct atmel_mci *host = mmc_priv(mmc);
++ u32 mr;
+
-+ irq = platform_get_irq(pdev, 0);
-+ if (irq < 0)
-+ return irq;
++ if (ios->clock) {
++ u32 clkdiv;
+
-+ pclk = clk_get(&pdev->dev, "pclk");
-+ if (IS_ERR(pclk))
-+ return PTR_ERR(pclk);
-+ hclk = clk_get(&pdev->dev, "hclk");
-+ if (IS_ERR(hclk)) {
-+ ret = PTR_ERR(hclk);
-+ goto err_get_hclk;
-+ }
++ /* Set clock rate */
++ clkdiv = DIV_ROUND_UP(host->bus_hz, 2 * ios->clock) - 1;
++ if (clkdiv > 255) {
++ dev_warn(&mmc->class_dev,
++ "clock %u too slow; using %lu\n",
++ ios->clock, host->bus_hz / (2 * 256));
++ clkdiv = 255;
++ }
+
-+ udc->pdev = pdev;
-+ udc->pclk = pclk;
-+ udc->hclk = hclk;
-+ udc->vbus_pin = -1;
++ mr = mci_readl(host, MR);
++ mr = MCI_BFINS(CLKDIV, clkdiv, mr)
++ | MCI_BIT(WRPROOF) | MCI_BIT(RDPROOF);
++ mci_writel(host, MR, mr);
+
-+ ret = -ENOMEM;
-+ udc->regs = ioremap(regs->start, regs->end - regs->start + 1);
-+ if (!udc->regs) {
-+ dev_err(&pdev->dev, "Unable to map I/O memory, aborting.\n");
-+ goto err_map_regs;
-+ }
-+ dev_info(&pdev->dev, "MMIO registers at 0x%08lx mapped at %p\n",
-+ (unsigned long)regs->start, udc->regs);
-+ udc->fifo = ioremap(fifo->start, fifo->end - fifo->start + 1);
-+ if (!udc->fifo) {
-+ dev_err(&pdev->dev, "Unable to map FIFO, aborting.\n");
-+ goto err_map_fifo;
++ /* Enable the MCI controller */
++ mci_writel(host, CR, MCI_BIT(MCIEN));
++ } else {
++ /* Disable the MCI controller */
++ mci_writel(host, CR, MCI_BIT(MCIDIS));
+ }
-+ dev_info(&pdev->dev, "FIFO at 0x%08lx mapped at %p\n",
-+ (unsigned long)fifo->start, udc->fifo);
-+
-+ device_initialize(&udc->gadget.dev);
-+ udc->gadget.dev.parent = &pdev->dev;
-+ udc->gadget.dev.dma_mask = pdev->dev.dma_mask;
-+
-+ platform_set_drvdata(pdev, udc);
+
-+ /* Make sure we start from a clean slate */
-+ clk_enable(pclk);
-+ usba_writel(udc, CTRL, 0);
-+ clk_disable(pclk);
-+
-+ INIT_LIST_HEAD(&usba_ep[0].ep.ep_list);
-+ usba_ep[0].ep_regs = udc->regs + USBA_EPT_BASE(0);
-+ usba_ep[0].dma_regs = udc->regs + USBA_DMA_BASE(0);
-+ usba_ep[0].fifo = udc->fifo + USBA_FIFO_BASE(0);
-+ for (i = 1; i < ARRAY_SIZE(usba_ep); i++) {
-+ struct usba_ep *ep = &usba_ep[i];
-+
-+ ep->ep_regs = udc->regs + USBA_EPT_BASE(i);
-+ ep->dma_regs = udc->regs + USBA_DMA_BASE(i);
-+ ep->fifo = udc->fifo + USBA_FIFO_BASE(i);
++ switch (ios->bus_width) {
++ case MMC_BUS_WIDTH_1:
++ mci_writel(host, SDCR, 0);
++ break;
++ case MMC_BUS_WIDTH_4:
++ mci_writel(host, SDCR, MCI_BIT(SDCBUS));
++ break;
++ }
+
-+ list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list);
++ switch (ios->power_mode) {
++ case MMC_POWER_ON:
++ /* Send init sequence (74 clock cycles) */
++ mci_writel(host, IDR, ~0UL);
++ mci_writel(host, CMDR, MCI_BF(SPCMD, MCI_SPCMD_INIT_CMD));
++ while (!(mci_readl(host, SR) & MCI_BIT(CMDRDY)))
++ cpu_relax();
++ break;
++ default:
++ /*
++ * TODO: None of the currently available AVR32-based
++ * boards allow MMC power to be turned off. Implement
++ * power control when this can be tested properly.
++ */
++ break;
+ }
++}
+
-+ ret = request_irq(irq, usba_udc_irq, 0, "atmel_usba_udc", udc);
-+ if (ret) {
-+ dev_err(&pdev->dev, "Cannot request irq %d (error %d)\n",
-+ irq, ret);
-+ goto err_request_irq;
-+ }
-+ udc->irq = irq;
++static int atmci_get_ro(struct mmc_host *mmc)
++{
++ int read_only = 0;
++ struct atmel_mci *host = mmc_priv(mmc);
+
-+ ret = device_add(&udc->gadget.dev);
-+ if (ret) {
-+ dev_dbg(&pdev->dev, "Could not add gadget: %d\n", ret);
-+ goto err_device_add;
-+ }
-+
-+ if (pdata && pdata->vbus_pin != GPIO_PIN_NONE) {
-+ if (!gpio_request(pdata->vbus_pin, "atmel_usba_udc")) {
-+ udc->vbus_pin = pdata->vbus_pin;
-+
-+ ret = request_irq(gpio_to_irq(udc->vbus_pin),
-+ usba_vbus_irq, 0,
-+ "atmel_usba_udc", udc);
-+ if (ret) {
-+ gpio_free(udc->vbus_pin);
-+ udc->vbus_pin = -1;
-+ dev_warn(&udc->pdev->dev,
-+ "failed to request vbus irq; "
-+ "assuming always on\n");
-+ } else {
-+ disable_irq(gpio_to_irq(udc->vbus_pin));
-+ }
-+ }
++ if (host->wp_pin >= 0) {
++ read_only = gpio_get_value(host->wp_pin);
++ dev_dbg(&mmc->class_dev, "card is %s\n",
++ read_only ? "read-only" : "read-write");
++ } else {
++ dev_dbg(&mmc->class_dev,
++ "no pin for checking read-only switch."
++ " Assuming write-enable.\n");
+ }
+
-+ usba_init_debugfs(udc);
-+ for (i = 1; i < ARRAY_SIZE(usba_ep); i++)
-+ usba_ep_init_debugfs(udc, &usba_ep[i]);
++ return read_only;
++}
+
-+ return 0;
++static struct mmc_host_ops atmci_ops = {
++ .request = atmci_request,
++ .set_ios = atmci_set_ios,
++ .get_ro = atmci_get_ro,
++};
+
-+err_device_add:
-+ free_irq(irq, udc);
-+err_request_irq:
-+ iounmap(udc->fifo);
-+err_map_fifo:
-+ iounmap(udc->regs);
-+err_map_regs:
-+ clk_put(hclk);
-+err_get_hclk:
-+ clk_put(pclk);
++static void atmci_request_end(struct mmc_host *mmc, struct mmc_request *mrq)
++{
++ struct atmel_mci *host = mmc_priv(mmc);
+
-+ platform_set_drvdata(pdev, NULL);
++ WARN_ON(host->cmd || host->data);
++ host->mrq = NULL;
+
-+ return ret;
++ mmc_request_done(mmc, mrq);
+}
+
-+static int __exit usba_udc_remove(struct platform_device *pdev)
++static void send_stop_cmd(struct mmc_host *mmc, struct mmc_data *data,
++ u32 flags)
+{
-+ struct usba_udc *udc;
-+ int i;
-+
-+ udc = platform_get_drvdata(pdev);
-+
-+ for (i = 1; i < ARRAY_SIZE(usba_ep); i++)
-+ usba_ep_cleanup_debugfs(&usba_ep[i]);
-+ usba_cleanup_debugfs(udc);
-+
-+ if (udc->vbus_pin != -1)
-+ gpio_free(udc->vbus_pin);
-+
-+ free_irq(udc->irq, udc);
-+ iounmap(udc->fifo);
-+ iounmap(udc->regs);
-+ clk_put(udc->hclk);
-+ clk_put(udc->pclk);
-+
-+ device_unregister(&udc->gadget.dev);
++ struct atmel_mci *host = mmc_priv(mmc);
+
-+ return 0;
++ atmci_start_command(host, data->stop, host->stop_cmdr | flags);
++ mci_writel(host, IER, MCI_BIT(CMDRDY));
+}
+
-+static struct platform_driver udc_driver = {
-+ .remove = __exit_p(usba_udc_remove),
-+ .driver = {
-+ .name = "atmel_usba_udc",
-+ },
-+};
-+
-+static int __init udc_init(void)
++static void atmci_data_complete(struct atmel_mci *host, struct mmc_data *data)
+{
-+ return platform_driver_probe(&udc_driver, usba_udc_probe);
-+}
-+module_init(udc_init);
++ host->data = NULL;
++ dma_unmap_sg(&host->pdev->dev, data->sg, host->dma.req.nr_sg,
++ ((data->flags & MMC_DATA_WRITE)
++ ? DMA_TO_DEVICE : DMA_FROM_DEVICE));
+
-+static void __exit udc_exit(void)
-+{
-+ platform_driver_unregister(&udc_driver);
++ /*
++ * Data might complete before command for very short transfers
++ * (like READ_SCR)
++ */
++ if (mci_cmd_is_complete(host)
++ && (!data->stop || mci_stop_is_complete(host)))
++ atmci_request_end(host->mmc, data->mrq);
+}
-+module_exit(udc_exit);
-+
-+MODULE_DESCRIPTION("Atmel USBA UDC driver");
-+MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
-+MODULE_LICENSE("GPL");
-diff --git a/drivers/usb/gadget/atmel_usba_udc.h b/drivers/usb/gadget/atmel_usba_udc.h
-new file mode 100644
-index 0000000..f4f0f8b
---- /dev/null
-+++ b/drivers/usb/gadget/atmel_usba_udc.h
-@@ -0,0 +1,350 @@
-+/*
-+ * Driver for the Atmel USBA high speed USB device controller
-+ *
-+ * Copyright (C) 2005-2007 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#ifndef __LINUX_USB_GADGET_USBA_UDC_H__
-+#define __LINUX_USB_GADGET_USBA_UDC_H__
-+
-+/* USB register offsets */
-+#define USBA_CTRL 0x0000
-+#define USBA_FNUM 0x0004
-+#define USBA_INT_ENB 0x0010
-+#define USBA_INT_STA 0x0014
-+#define USBA_INT_CLR 0x0018
-+#define USBA_EPT_RST 0x001c
-+#define USBA_TST 0x00e0
-+
-+/* USB endpoint register offsets */
-+#define USBA_EPT_CFG 0x0000
-+#define USBA_EPT_CTL_ENB 0x0004
-+#define USBA_EPT_CTL_DIS 0x0008
-+#define USBA_EPT_CTL 0x000c
-+#define USBA_EPT_SET_STA 0x0014
-+#define USBA_EPT_CLR_STA 0x0018
-+#define USBA_EPT_STA 0x001c
-+
-+/* USB DMA register offsets */
-+#define USBA_DMA_NXT_DSC 0x0000
-+#define USBA_DMA_ADDRESS 0x0004
-+#define USBA_DMA_CONTROL 0x0008
-+#define USBA_DMA_STATUS 0x000c
-+
-+/* Bitfields in CTRL */
-+#define USBA_DEV_ADDR_OFFSET 0
-+#define USBA_DEV_ADDR_SIZE 7
-+#define USBA_FADDR_EN (1 << 7)
-+#define USBA_EN_USBA (1 << 8)
-+#define USBA_DETACH (1 << 9)
-+#define USBA_REMOTE_WAKE_UP (1 << 10)
-+
-+/* Bitfields in FNUM */
-+#define USBA_MICRO_FRAME_NUM_OFFSET 0
-+#define USBA_MICRO_FRAME_NUM_SIZE 3
-+#define USBA_FRAME_NUMBER_OFFSET 3
-+#define USBA_FRAME_NUMBER_SIZE 11
-+#define USBA_FRAME_NUM_ERROR (1 << 31)
-+
-+/* Bitfields in INT_ENB/INT_STA/INT_CLR */
-+#define USBA_HIGH_SPEED (1 << 0)
-+#define USBA_DET_SUSPEND (1 << 1)
-+#define USBA_MICRO_SOF (1 << 2)
-+#define USBA_SOF (1 << 3)
-+#define USBA_END_OF_RESET (1 << 4)
-+#define USBA_WAKE_UP (1 << 5)
-+#define USBA_END_OF_RESUME (1 << 6)
-+#define USBA_UPSTREAM_RESUME (1 << 7)
-+#define USBA_EPT_INT_OFFSET 8
-+#define USBA_EPT_INT_SIZE 16
-+#define USBA_DMA_INT_OFFSET 24
-+#define USBA_DMA_INT_SIZE 8
-+
-+/* Bitfields in EPT_RST */
-+#define USBA_RST_OFFSET 0
-+#define USBA_RST_SIZE 16
-+
-+/* Bitfields in USBA_TST */
-+#define USBA_SPEED_CFG_OFFSET 0
-+#define USBA_SPEED_CFG_SIZE 2
-+#define USBA_TST_J_MODE (1 << 2)
-+#define USBA_TST_K_MODE (1 << 3)
-+#define USBA_TST_PKT_MODE (1 << 4)
-+#define USBA_OPMODE2 (1 << 5)
-+
-+/* Bitfields in EPT_CFG */
-+#define USBA_EPT_SIZE_OFFSET 0
-+#define USBA_EPT_SIZE_SIZE 3
-+#define USBA_EPT_DIR_IN (1 << 3)
-+#define USBA_EPT_TYPE_OFFSET 4
-+#define USBA_EPT_TYPE_SIZE 2
-+#define USBA_BK_NUMBER_OFFSET 6
-+#define USBA_BK_NUMBER_SIZE 2
-+#define USBA_NB_TRANS_OFFSET 8
-+#define USBA_NB_TRANS_SIZE 2
-+#define USBA_EPT_MAPPED (1 << 31)
-+
-+/* Bitfields in EPT_CTL/EPT_CTL_ENB/EPT_CTL_DIS */
-+#define USBA_EPT_ENABLE (1 << 0)
-+#define USBA_AUTO_VALID (1 << 1)
-+#define USBA_INTDIS_DMA (1 << 3)
-+#define USBA_NYET_DIS (1 << 4)
-+#define USBA_DATAX_RX (1 << 6)
-+#define USBA_MDATA_RX (1 << 7)
-+/* Bits 8-15 and 31 enable interrupts for respective bits in EPT_STA */
-+#define USBA_BUSY_BANK_IE (1 << 18)
-+
-+/* Bitfields in EPT_SET_STA/EPT_CLR_STA/EPT_STA */
-+#define USBA_FORCE_STALL (1 << 5)
-+#define USBA_TOGGLE_CLR (1 << 6)
-+#define USBA_TOGGLE_SEQ_OFFSET 6
-+#define USBA_TOGGLE_SEQ_SIZE 2
-+#define USBA_ERR_OVFLW (1 << 8)
-+#define USBA_RX_BK_RDY (1 << 9)
-+#define USBA_KILL_BANK (1 << 9)
-+#define USBA_TX_COMPLETE (1 << 10)
-+#define USBA_TX_PK_RDY (1 << 11)
-+#define USBA_ISO_ERR_TRANS (1 << 11)
-+#define USBA_RX_SETUP (1 << 12)
-+#define USBA_ISO_ERR_FLOW (1 << 12)
-+#define USBA_STALL_SENT (1 << 13)
-+#define USBA_ISO_ERR_CRC (1 << 13)
-+#define USBA_ISO_ERR_NBTRANS (1 << 13)
-+#define USBA_NAK_IN (1 << 14)
-+#define USBA_ISO_ERR_FLUSH (1 << 14)
-+#define USBA_NAK_OUT (1 << 15)
-+#define USBA_CURRENT_BANK_OFFSET 16
-+#define USBA_CURRENT_BANK_SIZE 2
-+#define USBA_BUSY_BANKS_OFFSET 18
-+#define USBA_BUSY_BANKS_SIZE 2
-+#define USBA_BYTE_COUNT_OFFSET 20
-+#define USBA_BYTE_COUNT_SIZE 11
-+#define USBA_SHORT_PACKET (1 << 31)
-+
-+/* Bitfields in DMA_CONTROL */
-+#define USBA_DMA_CH_EN (1 << 0)
-+#define USBA_DMA_LINK (1 << 1)
-+#define USBA_DMA_END_TR_EN (1 << 2)
-+#define USBA_DMA_END_BUF_EN (1 << 3)
-+#define USBA_DMA_END_TR_IE (1 << 4)
-+#define USBA_DMA_END_BUF_IE (1 << 5)
-+#define USBA_DMA_DESC_LOAD_IE (1 << 6)
-+#define USBA_DMA_BURST_LOCK (1 << 7)
-+#define USBA_DMA_BUF_LEN_OFFSET 16
-+#define USBA_DMA_BUF_LEN_SIZE 16
-+
-+/* Bitfields in DMA_STATUS */
-+#define USBA_DMA_CH_ACTIVE (1 << 1)
-+#define USBA_DMA_END_TR_ST (1 << 4)
-+#define USBA_DMA_END_BUF_ST (1 << 5)
-+#define USBA_DMA_DESC_LOAD_ST (1 << 6)
-+
-+/* Constants for SPEED_CFG */
-+#define USBA_SPEED_CFG_NORMAL 0
-+#define USBA_SPEED_CFG_FORCE_HIGH 2
-+#define USBA_SPEED_CFG_FORCE_FULL 3
-+
-+/* Constants for EPT_SIZE */
-+#define USBA_EPT_SIZE_8 0
-+#define USBA_EPT_SIZE_16 1
-+#define USBA_EPT_SIZE_32 2
-+#define USBA_EPT_SIZE_64 3
-+#define USBA_EPT_SIZE_128 4
-+#define USBA_EPT_SIZE_256 5
-+#define USBA_EPT_SIZE_512 6
-+#define USBA_EPT_SIZE_1024 7
-+
-+/* Constants for EPT_TYPE */
-+#define USBA_EPT_TYPE_CONTROL 0
-+#define USBA_EPT_TYPE_ISO 1
-+#define USBA_EPT_TYPE_BULK 2
-+#define USBA_EPT_TYPE_INT 3
-+
-+/* Constants for BK_NUMBER */
-+#define USBA_BK_NUMBER_ZERO 0
-+#define USBA_BK_NUMBER_ONE 1
-+#define USBA_BK_NUMBER_DOUBLE 2
-+#define USBA_BK_NUMBER_TRIPLE 3
-+
-+/* Bit manipulation macros */
-+#define USBA_BF(name, value) \
-+ (((value) & ((1 << USBA_##name##_SIZE) - 1)) \
-+ << USBA_##name##_OFFSET)
-+#define USBA_BFEXT(name, value) \
-+ (((value) >> USBA_##name##_OFFSET) \
-+ & ((1 << USBA_##name##_SIZE) - 1))
-+#define USBA_BFINS(name, value, old) \
-+ (((old) & ~(((1 << USBA_##name##_SIZE) - 1) \
-+ << USBA_##name##_OFFSET)) \
-+ | USBA_BF(name, value))
-+
-+/* Register access macros */
-+#define usba_readl(udc, reg) \
-+ __raw_readl((udc)->regs + USBA_##reg)
-+#define usba_writel(udc, reg, value) \
-+ __raw_writel((value), (udc)->regs + USBA_##reg)
-+#define usba_ep_readl(ep, reg) \
-+ __raw_readl((ep)->ep_regs + USBA_EPT_##reg)
-+#define usba_ep_writel(ep, reg, value) \
-+ __raw_writel((value), (ep)->ep_regs + USBA_EPT_##reg)
-+#define usba_dma_readl(ep, reg) \
-+ __raw_readl((ep)->dma_regs + USBA_DMA_##reg)
-+#define usba_dma_writel(ep, reg, value) \
-+ __raw_writel((value), (ep)->dma_regs + USBA_DMA_##reg)
-+
-+/* Calculate base address for a given endpoint or DMA controller */
-+#define USBA_EPT_BASE(x) (0x100 + (x) * 0x20)
-+#define USBA_DMA_BASE(x) (0x300 + (x) * 0x10)
-+#define USBA_FIFO_BASE(x) ((x) << 16)
-+
-+/* Synth parameters */
-+#define USBA_NR_ENDPOINTS 7
-+
-+#define EP0_FIFO_SIZE 64
-+#define EP0_EPT_SIZE USBA_EPT_SIZE_64
-+#define EP0_NR_BANKS 1
+
-+/*
-+ * REVISIT: Try to eliminate this value. Can we rely on req->mapped to
-+ * provide this information?
-+ */
-+#define DMA_ADDR_INVALID (~(dma_addr_t)0)
-+
-+#define FIFO_IOMEM_ID 0
-+#define CTRL_IOMEM_ID 1
-+
-+#ifdef DEBUG
-+#define DBG_ERR 0x0001 /* report all error returns */
-+#define DBG_HW 0x0002 /* debug hardware initialization */
-+#define DBG_GADGET 0x0004 /* calls to/from gadget driver */
-+#define DBG_INT 0x0008 /* interrupts */
-+#define DBG_BUS 0x0010 /* report changes in bus state */
-+#define DBG_QUEUE 0x0020 /* debug request queue processing */
-+#define DBG_FIFO 0x0040 /* debug FIFO contents */
-+#define DBG_DMA 0x0080 /* debug DMA handling */
-+#define DBG_REQ 0x0100 /* print out queued request length */
-+#define DBG_ALL 0xffff
-+#define DBG_NONE 0x0000
-+
-+#define DEBUG_LEVEL (DBG_ERR)
-+#define DBG(level, fmt, ...) \
-+ do { \
-+ if ((level) & DEBUG_LEVEL) \
-+ printk(KERN_DEBUG "udc: " fmt, ## __VA_ARGS__); \
-+ } while (0)
-+#else
-+#define DBG(level, fmt...)
-+#endif
++static void atmci_command_complete(struct atmel_mci *host,
++ struct mmc_command *cmd, u32 status)
++{
++ if (status & MCI_BIT(RTOE))
++ cmd->error = -ETIMEDOUT;
++ else if ((cmd->flags & MMC_RSP_CRC)
++ && (status & MCI_BIT(RCRCE)))
++ cmd->error = -EILSEQ;
++ else if (status & (MCI_BIT(RINDE) | MCI_BIT(RDIRE) | MCI_BIT(RENDE)))
++ cmd->error = -EIO;
+
-+enum usba_ctrl_state {
-+ WAIT_FOR_SETUP,
-+ DATA_STAGE_IN,
-+ DATA_STAGE_OUT,
-+ STATUS_STAGE_IN,
-+ STATUS_STAGE_OUT,
-+ STATUS_STAGE_ADDR,
-+ STATUS_STAGE_TEST,
-+};
-+/*
-+ EP_STATE_IDLE,
-+ EP_STATE_SETUP,
-+ EP_STATE_IN_DATA,
-+ EP_STATE_OUT_DATA,
-+ EP_STATE_SET_ADDR_STATUS,
-+ EP_STATE_RX_STATUS,
-+ EP_STATE_TX_STATUS,
-+ EP_STATE_HALT,
-+*/
-+
-+struct usba_dma_desc {
-+ dma_addr_t next;
-+ dma_addr_t addr;
-+ u32 ctrl;
-+};
++ if (cmd->error) {
++ dev_dbg(&host->mmc->class_dev,
++ "command error: op=0x%x status=0x%08x\n",
++ cmd->opcode, status);
+
-+struct usba_ep {
-+ int state;
-+ void __iomem *ep_regs;
-+ void __iomem *dma_regs;
-+ void __iomem *fifo;
-+ struct usb_ep ep;
-+ struct usba_udc *udc;
-+
-+ struct list_head queue;
-+ const struct usb_endpoint_descriptor *desc;
-+
-+ u16 fifo_size;
-+ u8 nr_banks;
-+ u8 index;
-+ unsigned int can_dma:1;
-+ unsigned int can_isoc:1;
-+ unsigned int is_isoc:1;
-+ unsigned int is_in:1;
-+
-+#ifdef CONFIG_USB_GADGET_DEBUG_FS
-+ u32 last_dma_status;
-+ struct dentry *debugfs_dir;
-+ struct dentry *debugfs_queue;
-+ struct dentry *debugfs_dma_status;
-+ struct dentry *debugfs_state;
-+#endif
-+};
++ if (cmd->data) {
++ dma_stop_request(host->dma.req.req.dmac,
++ host->dma.req.req.channel);
++ mci_writel(host, IDR, MCI_BIT(NOTBUSY)
++ | MCI_DATA_ERROR_FLAGS);
++ host->data = NULL;
++ }
++ }
++}
+
-+struct usba_request {
-+ struct usb_request req;
-+ struct list_head queue;
++static void atmci_detect_change(unsigned long data)
++{
++ struct atmel_mci *host = (struct atmel_mci *)data;
++ struct mmc_request *mrq = host->mrq;
++ int present;
+
-+ u32 ctrl;
++ /*
++ * atmci_remove() sets detect_pin to -1 before freeing the
++ * interrupt. We must not re-enable the interrupt if it has
++ * been freed.
++ */
++ smp_rmb();
++ if (host->detect_pin < 0)
++ return;
+
-+ unsigned int submitted:1;
-+ unsigned int last_transaction:1;
-+ unsigned int using_dma:1;
-+ unsigned int mapped:1;
-+};
++ enable_irq(gpio_to_irq(host->detect_pin));
++ present = !gpio_get_value(host->detect_pin);
+
-+struct usba_udc {
-+ /* Protect hw registers from concurrent modifications */
-+ spinlock_t lock;
++ dev_vdbg(&host->pdev->dev, "detect change: %d (was %d)\n",
++ present, host->present);
+
-+ void __iomem *regs;
-+ void __iomem *fifo;
++ if (present != host->present) {
++ dev_dbg(&host->mmc->class_dev, "card %s\n",
++ present ? "inserted" : "removed");
++ host->present = present;
+
-+ struct usb_gadget gadget;
-+ struct usb_gadget_driver *driver;
-+ struct platform_device *pdev;
-+ int irq;
-+ int vbus_pin;
-+ struct clk *pclk;
-+ struct clk *hclk;
++ /* Reset controller if card is gone */
++ if (!present) {
++ mci_writel(host, CR, MCI_BIT(SWRST));
++ mci_writel(host, IDR, ~0UL);
++ mci_writel(host, CR, MCI_BIT(MCIEN));
++ }
+
-+ int test_mode;
-+ int vbus_prev;
++ /* Clean up queue if present */
++ if (mrq) {
++ if (!mci_cmd_is_complete(host))
++ mrq->cmd->error = -ENOMEDIUM;
++ if (mrq->data && !mci_data_is_complete(host)
++ && !mci_data_error_is_complete(host)) {
++ dma_stop_request(host->dma.req.req.dmac,
++ host->dma.req.req.channel);
++ host->data->error = -ENOMEDIUM;
++ atmci_data_complete(host, host->data);
++ }
++ if (mrq->stop && !mci_stop_is_complete(host))
++ mrq->stop->error = -ENOMEDIUM;
+
-+#ifdef CONFIG_USB_GADGET_DEBUG_FS
-+ struct dentry *debugfs_root;
-+ struct dentry *debugfs_regs;
-+#endif
-+};
++ host->cmd = NULL;
++ atmci_request_end(host->mmc, mrq);
++ }
+
-+static inline struct usba_ep *to_usba_ep(struct usb_ep *ep)
-+{
-+ return container_of(ep, struct usba_ep, ep);
++ mmc_detect_change(host->mmc, 0);
++ }
+}
+
-+static inline struct usba_request *to_usba_req(struct usb_request *req)
++static void atmci_tasklet_func(unsigned long priv)
+{
-+ return container_of(req, struct usba_request, req);
-+}
++ struct mmc_host *mmc = (struct mmc_host *)priv;
++ struct atmel_mci *host = mmc_priv(mmc);
++ struct mmc_request *mrq = host->mrq;
++ struct mmc_data *data = host->data;
+
-+static inline struct usba_udc *to_usba_udc(struct usb_gadget *gadget)
-+{
-+ return container_of(gadget, struct usba_udc, gadget);
-+}
++ dev_vdbg(&mmc->class_dev,
++ "tasklet: pending/completed/mask %lx/%lx/%x\n",
++ host->pending_events, host->completed_events,
++ mci_readl(host, IMR));
+
-+#define ep_is_control(ep) ((ep)->index == 0)
-+#define ep_is_idle(ep) ((ep)->state == EP_STATE_IDLE)
++ if (mci_clear_cmd_is_pending(host)) {
++ mci_set_cmd_complete(host);
++ atmci_command_complete(host, mrq->cmd, host->cmd_status);
++ if (!host->data || mci_data_is_complete(host)
++ || mci_data_error_is_complete(host))
++ atmci_request_end(mmc, mrq);
++ }
++ if (mci_clear_stop_is_pending(host)) {
++ mci_set_stop_complete(host);
++ atmci_command_complete(host, mrq->stop, host->stop_status);
++ if (mci_data_is_complete(host)
++ || mci_data_error_is_complete(host))
++ atmci_request_end(mmc, mrq);
++ }
++ if (mci_clear_dma_error_is_pending(host)) {
++ mci_set_dma_error_complete(host);
++ mci_clear_data_pending(host);
+
-+#endif /* __LINUX_USB_GADGET_USBA_UDC_H */
-diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
-index 235b618..bb361ab 100644
---- a/drivers/video/atmel_lcdfb.c
-+++ b/drivers/video/atmel_lcdfb.c
-@@ -37,7 +37,9 @@
- #endif
-
- #if defined(CONFIG_ARCH_AT91)
--#define ATMEL_LCDFB_FBINFO_DEFAULT FBINFO_DEFAULT
-+#define ATMEL_LCDFB_FBINFO_DEFAULT (FBINFO_DEFAULT \
-+ | FBINFO_PARTIAL_PAN_OK \
-+ | FBINFO_HWACCEL_YPAN)
-
- static inline void atmel_lcdfb_update_dma2d(struct atmel_lcdfb_info *sinfo,
- struct fb_var_screeninfo *var)
-@@ -74,7 +76,7 @@ static struct fb_fix_screeninfo atmel_lcdfb_fix __initdata = {
- .type = FB_TYPE_PACKED_PIXELS,
- .visual = FB_VISUAL_TRUECOLOR,
- .xpanstep = 0,
-- .ypanstep = 0,
-+ .ypanstep = 1,
- .ywrapstep = 0,
- .accel = FB_ACCEL_NONE,
- };
-diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
-index 2580f5f..b6f936a 100644
---- a/drivers/video/backlight/Kconfig
-+++ b/drivers/video/backlight/Kconfig
-@@ -24,6 +24,18 @@ config LCD_CLASS_DEVICE
- To have support for your specific LCD panel you will have to
- select the proper drivers which depend on this option.
-
-+config LCD_LTV350QV
-+ tristate "Samsung LTV350QV LCD Panel"
-+ depends on LCD_CLASS_DEVICE && SPI_MASTER
-+ default n
-+ help
-+ If you have a Samsung LTV350QV LCD panel, say y to include a
-+ power control driver for it. The panel starts up in power
-+ off state, so you need this driver in order to see any
-+ output.
++ /* DMA controller got bus error => invalid address */
++ data->error = -EIO;
+
-+ The LTV350QV panel is present on all ATSTK1000 boards.
++ dev_dbg(&mmc->class_dev, "dma error after %u bytes xfered\n",
++ host->data->bytes_xfered);
+
- #
- # Backlight
- #
-diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
-index c6e2266..965a78b 100644
---- a/drivers/video/backlight/Makefile
-+++ b/drivers/video/backlight/Makefile
-@@ -1,6 +1,8 @@
- # Backlight & LCD drivers
-
- obj-$(CONFIG_LCD_CLASS_DEVICE) += lcd.o
-+obj-$(CONFIG_LCD_LTV350QV) += ltv350qv.o
++ if (data->stop
++ && !mci_set_stop_sent_is_completed(host))
++ /* TODO: Check if card is still present */
++ send_stop_cmd(host->mmc, data, 0);
+
- obj-$(CONFIG_BACKLIGHT_CLASS_DEVICE) += backlight.o
- obj-$(CONFIG_BACKLIGHT_CORGI) += corgi_bl.o
- obj-$(CONFIG_BACKLIGHT_HP680) += hp680_bl.o
-diff --git a/drivers/video/backlight/ltv350qv.c b/drivers/video/backlight/ltv350qv.c
-new file mode 100644
-index 0000000..751dc53
---- /dev/null
-+++ b/drivers/video/backlight/ltv350qv.c
-@@ -0,0 +1,339 @@
-+/*
-+ * Power control for Samsung LTV350QV Quarter VGA LCD Panel
-+ *
-+ * Copyright (C) 2006, 2007 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#include <linux/delay.h>
-+#include <linux/err.h>
-+#include <linux/fb.h>
-+#include <linux/init.h>
-+#include <linux/lcd.h>
-+#include <linux/module.h>
-+#include <linux/spi/spi.h>
++ atmci_data_complete(host, data);
++ }
++ if (mci_clear_data_error_is_pending(host)) {
++ u32 status = host->data_status;
+
-+#include "ltv350qv.h"
++ mci_set_data_error_complete(host);
++ mci_clear_data_pending(host);
+
-+#define POWER_IS_ON(pwr) ((pwr) <= FB_BLANK_NORMAL)
++ dma_stop_request(host->dma.req.req.dmac,
++ host->dma.req.req.channel);
+
-+struct ltv350qv {
-+ struct spi_device *spi;
-+ u8 *buffer;
-+ int power;
-+ struct lcd_device *ld;
-+};
++ if (status & MCI_BIT(DCRCE)) {
++ dev_dbg(&mmc->class_dev, "data CRC error\n");
++ data->error = -EILSEQ;
++ } else if (status & MCI_BIT(DTOE)) {
++ dev_dbg(&mmc->class_dev, "data timeout error\n");
++ data->error = -ETIMEDOUT;
++ } else {
++ dev_dbg(&mmc->class_dev, "data FIFO error\n");
++ data->error = -EIO;
++ }
++ dev_dbg(&mmc->class_dev, "bytes xfered: %u\n",
++ data->bytes_xfered);
++
++ if (data->stop
++ && !mci_set_stop_sent_is_completed(host))
++ /* TODO: Check if card is still present */
++ send_stop_cmd(host->mmc, data, 0);
++
++ atmci_data_complete(host, data);
++ }
++ if (mci_clear_data_is_pending(host)) {
++ mci_set_data_complete(host);
++ data->bytes_xfered = data->blocks * data->blksz;
++ atmci_data_complete(host, data);
++ }
++ /* See if there is a pending STOP which can be sent */
++ if (host->pending_stop && mci_cmd_is_complete(host)) {
++ host->pending_stop = 0;
++ if (mrq->stop && !mci_set_stop_sent_is_completed(host))
++ send_stop_cmd(host->mmc, mrq->data, 0);
++ }
++}
+
-+/*
-+ * The power-on and power-off sequences are taken from the
-+ * LTV350QV-F04 data sheet from Samsung. The register definitions are
-+ * taken from the S6F2002 command list also from Samsung. Both
-+ * documents are distributed with the AVR32 Linux BSP CD from Atmel.
-+ *
-+ * There's still some voodoo going on here, but it's a lot better than
-+ * in the first incarnation of the driver where all we had was the raw
-+ * numbers from the initialization sequence.
-+ */
-+static int ltv350qv_write_reg(struct ltv350qv *lcd, u8 reg, u16 val)
++static void atmci_cmd_interrupt(struct mmc_host *mmc, u32 status)
+{
-+ struct spi_message msg;
-+ struct spi_transfer index_xfer = {
-+ .len = 3,
-+ .cs_change = 1,
-+ };
-+ struct spi_transfer value_xfer = {
-+ .len = 3,
-+ };
++ struct atmel_mci *host = mmc_priv(mmc);
++ struct mmc_command *cmd = host->cmd;
++
++ /*
++ * Read the response now so that we're free to send a new
++ * command immediately.
++ */
++ cmd->resp[0] = mci_readl(host, RSPR);
++ cmd->resp[1] = mci_readl(host, RSPR);
++ cmd->resp[2] = mci_readl(host, RSPR);
++ cmd->resp[3] = mci_readl(host, RSPR);
+
-+ spi_message_init(&msg);
++ mci_writel(host, IDR, MCI_BIT(CMDRDY));
++ host->cmd = NULL;
+
-+ /* register index */
-+ lcd->buffer[0] = LTV_OPC_INDEX;
-+ lcd->buffer[1] = 0x00;
-+ lcd->buffer[2] = reg & 0x7f;
-+ index_xfer.tx_buf = lcd->buffer;
-+ spi_message_add_tail(&index_xfer, &msg);
++ if (mci_stop_sent_is_complete(host)) {
++ host->stop_status = status;
++ mci_set_stop_pending(host);
++ } else {
++ struct mmc_request *mrq = host->mrq;
+
-+ /* register value */
-+ lcd->buffer[4] = LTV_OPC_DATA;
-+ lcd->buffer[5] = val >> 8;
-+ lcd->buffer[6] = val;
-+ value_xfer.tx_buf = lcd->buffer + 4;
-+ spi_message_add_tail(&value_xfer, &msg);
++ if (mrq->stop && mci_dma_is_complete(host)
++ && !mci_set_stop_sent_is_completed(host))
++ send_stop_cmd(host->mmc, mrq->data, 0);
++ host->cmd_status = status;
++ mci_set_cmd_pending(host);
++ }
+
-+ return spi_sync(lcd->spi, &msg);
++ tasklet_schedule(&host->tasklet);
+}
+
-+/* The comments are taken straight from the data sheet */
-+static int ltv350qv_power_on(struct ltv350qv *lcd)
++static void atmci_xfer_complete(struct dma_request *_req)
+{
-+ int ret;
++ struct dma_request_sg *req = to_dma_request_sg(_req);
++ struct atmel_mci_dma *dma;
++ struct atmel_mci *host;
++ struct mmc_data *data;
+
-+ /* Power On Reset Display off State */
-+ if (ltv350qv_write_reg(lcd, LTV_PWRCTL1, 0x0000))
-+ goto err;
-+ msleep(15);
++ dma = container_of(req, struct atmel_mci_dma, req);
++ host = container_of(dma, struct atmel_mci, dma);
++ data = host->data;
+
-+ /* Power Setting Function 1 */
-+ if (ltv350qv_write_reg(lcd, LTV_PWRCTL1, LTV_VCOM_DISABLE))
-+ goto err;
-+ if (ltv350qv_write_reg(lcd, LTV_PWRCTL2, LTV_VCOML_ENABLE))
-+ goto err_power1;
-+
-+ /* Power Setting Function 2 */
-+ if (ltv350qv_write_reg(lcd, LTV_PWRCTL1,
-+ LTV_VCOM_DISABLE | LTV_DRIVE_CURRENT(5)
-+ | LTV_SUPPLY_CURRENT(5)))
-+ goto err_power2;
-+
-+ msleep(55);
-+
-+ /* Instruction Setting */
-+ ret = ltv350qv_write_reg(lcd, LTV_IFCTL,
-+ LTV_NMD | LTV_REV | LTV_NL(0x1d));
-+ ret |= ltv350qv_write_reg(lcd, LTV_DATACTL,
-+ LTV_DS_SAME | LTV_CHS_480
-+ | LTV_DF_RGB | LTV_RGB_BGR);
-+ ret |= ltv350qv_write_reg(lcd, LTV_ENTRY_MODE,
-+ LTV_VSPL_ACTIVE_LOW
-+ | LTV_HSPL_ACTIVE_LOW
-+ | LTV_DPL_SAMPLE_RISING
-+ | LTV_EPL_ACTIVE_LOW
-+ | LTV_SS_RIGHT_TO_LEFT);
-+ ret |= ltv350qv_write_reg(lcd, LTV_GATECTL1, LTV_CLW(3));
-+ ret |= ltv350qv_write_reg(lcd, LTV_GATECTL2,
-+ LTV_NW_INV_1LINE | LTV_FWI(3));
-+ ret |= ltv350qv_write_reg(lcd, LTV_VBP, 0x000a);
-+ ret |= ltv350qv_write_reg(lcd, LTV_HBP, 0x0021);
-+ ret |= ltv350qv_write_reg(lcd, LTV_SOTCTL, LTV_SDT(3) | LTV_EQ(0));
-+ ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(0), 0x0103);
-+ ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(1), 0x0301);
-+ ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(2), 0x1f0f);
-+ ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(3), 0x1f0f);
-+ ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(4), 0x0707);
-+ ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(5), 0x0307);
-+ ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(6), 0x0707);
-+ ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(7), 0x0000);
-+ ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(8), 0x0004);
-+ ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(9), 0x0000);
-+ if (ret)
-+ goto err_settings;
-+
-+ /* Wait more than 2 frames */
-+ msleep(20);
-+
-+ /* Display On Sequence */
-+ ret = ltv350qv_write_reg(lcd, LTV_PWRCTL1,
-+ LTV_VCOM_DISABLE | LTV_VCOMOUT_ENABLE
-+ | LTV_POWER_ON | LTV_DRIVE_CURRENT(5)
-+ | LTV_SUPPLY_CURRENT(5));
-+ ret |= ltv350qv_write_reg(lcd, LTV_GATECTL2,
-+ LTV_NW_INV_1LINE | LTV_DSC | LTV_FWI(3));
-+ if (ret)
-+ goto err_disp_on;
++ /*
++ * This callback may be called before we see the CMDRDY
++ * interrupt under heavy irq load (possibly caused by other
++ * drivers) or when interrupts are disabled for a long time.
++ */
++ mci_set_dma_complete(host);
+
-+ /* Display should now be ON. Phew. */
-+ return 0;
++ if (data->stop) {
++ if (!mci_cmd_is_complete(host)) {
++ /* Just remember a STOP must be sent */
++ host->pending_stop = 1;
++ } else if (!mci_set_stop_sent_is_completed(host)) {
++ send_stop_cmd(host->mmc, data, 0);
++ host->pending_stop = 0;
++ }
++ }
+
-+err_disp_on:
+ /*
-+ * Try to recover. Error handling probably isn't very useful
-+ * at this point, just make a best effort to switch the panel
-+ * off.
++ * Regardless of what the documentation says, we have to wait
++ * for NOTBUSY even after block read operations.
++ *
++ * When the DMA transfer is complete, the controller may still
++ * be reading the CRC from the card, i.e. the data transfer is
++ * still in progress and we haven't seen all the potential
++ * error bits yet.
+ */
-+ ltv350qv_write_reg(lcd, LTV_PWRCTL1,
-+ LTV_VCOM_DISABLE | LTV_DRIVE_CURRENT(5)
-+ | LTV_SUPPLY_CURRENT(5));
-+ ltv350qv_write_reg(lcd, LTV_GATECTL2,
-+ LTV_NW_INV_1LINE | LTV_FWI(3));
-+err_settings:
-+err_power2:
-+err_power1:
-+ ltv350qv_write_reg(lcd, LTV_PWRCTL2, 0x0000);
-+ msleep(1);
-+err:
-+ ltv350qv_write_reg(lcd, LTV_PWRCTL1, LTV_VCOM_DISABLE);
-+ return -EIO;
++ mci_writel(host, IER, MCI_BIT(NOTBUSY));
+}
+
-+static int ltv350qv_power_off(struct ltv350qv *lcd)
++static void atmci_dma_error(struct dma_request *_req)
+{
-+ int ret;
-+
-+ /* Display Off Sequence */
-+ ret = ltv350qv_write_reg(lcd, LTV_PWRCTL1,
-+ LTV_VCOM_DISABLE
-+ | LTV_DRIVE_CURRENT(5)
-+ | LTV_SUPPLY_CURRENT(5));
-+ ret |= ltv350qv_write_reg(lcd, LTV_GATECTL2,
-+ LTV_NW_INV_1LINE | LTV_FWI(3));
-+
-+ /* Power down setting 1 */
-+ ret |= ltv350qv_write_reg(lcd, LTV_PWRCTL2, 0x0000);
-+
-+ /* Wait at least 1 ms */
-+ msleep(1);
++ struct dma_request_sg *req = to_dma_request_sg(_req);
++ struct atmel_mci_dma *dma;
++ struct atmel_mci *host;
+
-+ /* Power down setting 2 */
-+ ret |= ltv350qv_write_reg(lcd, LTV_PWRCTL1, LTV_VCOM_DISABLE);
++ dma = container_of(req, struct atmel_mci_dma, req);
++ host = container_of(dma, struct atmel_mci, dma);
+
-+ /*
-+ * No point in trying to recover here. If we can't switch the
-+ * panel off, what are we supposed to do other than inform the
-+ * user about the failure?
-+ */
-+ if (ret)
-+ return -EIO;
++ mci_writel(host, IDR, (MCI_BIT(NOTBUSY)
++ | MCI_DATA_ERROR_FLAGS));
+
-+ /* Display power should now be OFF */
-+ return 0;
++ mci_set_dma_error_pending(host);
++ tasklet_schedule(&host->tasklet);
+}
+
-+static int ltv350qv_power(struct ltv350qv *lcd, int power)
++static irqreturn_t atmci_interrupt(int irq, void *dev_id)
+{
-+ int ret = 0;
++ struct mmc_host *mmc = dev_id;
++ struct atmel_mci *host = mmc_priv(mmc);
++ u32 status, mask, pending;
+
-+ if (POWER_IS_ON(power) && !POWER_IS_ON(lcd->power))
-+ ret = ltv350qv_power_on(lcd);
-+ else if (!POWER_IS_ON(power) && POWER_IS_ON(lcd->power))
-+ ret = ltv350qv_power_off(lcd);
++ spin_lock(&mmc->lock);
+
-+ if (!ret)
-+ lcd->power = power;
++ status = mci_readl(host, SR);
++ mask = mci_readl(host, IMR);
++ pending = status & mask;
+
-+ return ret;
-+}
++ do {
++ if (pending & MCI_DATA_ERROR_FLAGS) {
++ mci_writel(host, IDR, (MCI_BIT(NOTBUSY)
++ | MCI_DATA_ERROR_FLAGS));
++ host->data_status = status;
++ mci_set_data_error_pending(host);
++ tasklet_schedule(&host->tasklet);
++ break;
++ }
++ if (pending & MCI_BIT(CMDRDY))
++ atmci_cmd_interrupt(mmc, status);
++ if (pending & MCI_BIT(NOTBUSY)) {
++ mci_writel(host, IDR, (MCI_BIT(NOTBUSY)
++ | MCI_DATA_ERROR_FLAGS));
++ mci_set_data_pending(host);
++ tasklet_schedule(&host->tasklet);
++ }
+
-+static int ltv350qv_set_power(struct lcd_device *ld, int power)
-+{
-+ struct ltv350qv *lcd;
++ status = mci_readl(host, SR);
++ mask = mci_readl(host, IMR);
++ pending = status & mask;
++ } while (pending);
++
++ spin_unlock(&mmc->lock);
+
-+ lcd = lcd_get_data(ld);
-+ return ltv350qv_power(lcd, power);
++ return IRQ_HANDLED;
+}
+
-+static int ltv350qv_get_power(struct lcd_device *ld)
++static irqreturn_t atmci_detect_interrupt(int irq, void *dev_id)
+{
-+ struct ltv350qv *lcd;
++ struct mmc_host *mmc = dev_id;
++ struct atmel_mci *host = mmc_priv(mmc);
+
-+ lcd = lcd_get_data(ld);
-+ return lcd->power;
-+}
++ /*
++ * Disable interrupts until the pin has stabilized and check
++ * the state then. Use mod_timer() since we may be in the
++ * middle of the timer routine when this interrupt triggers.
++ */
++ disable_irq_nosync(irq);
++ mod_timer(&host->detect_timer, jiffies + msecs_to_jiffies(20));
+
-+static struct lcd_ops ltv_ops = {
-+ .get_power = ltv350qv_get_power,
-+ .set_power = ltv350qv_set_power,
-+};
++ return IRQ_HANDLED;
++}
+
-+static int __devinit ltv350qv_probe(struct spi_device *spi)
++static int __devinit atmci_probe(struct platform_device *pdev)
+{
-+ struct ltv350qv *lcd;
-+ struct lcd_device *ld;
++ struct mci_platform_data *board;
++ struct atmel_mci *host;
++ struct mmc_host *mmc;
++ struct resource *regs;
++ int irq;
+ int ret;
+
-+ lcd = kzalloc(sizeof(struct ltv350qv), GFP_KERNEL);
-+ if (!lcd)
++ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (!regs)
++ return -ENXIO;
++ irq = platform_get_irq(pdev, 0);
++ if (irq < 0)
++ return irq;
++
++ board = pdev->dev.platform_data;
++
++ mmc = mmc_alloc_host(sizeof(struct atmel_mci), &pdev->dev);
++ if (!mmc)
+ return -ENOMEM;
+
-+ lcd->spi = spi;
-+ lcd->power = FB_BLANK_POWERDOWN;
-+ lcd->buffer = kzalloc(8, GFP_KERNEL);
++ host = mmc_priv(mmc);
++ host->pdev = pdev;
++ host->mmc = mmc;
++ if (board) {
++ host->detect_pin = board->detect_pin;
++ host->wp_pin = board->wp_pin;
++ } else {
++ host->detect_pin = -1;
++ host->wp_pin = -1;
++ }
+
-+ ld = lcd_device_register("ltv350qv", &spi->dev, lcd, <v_ops);
-+ if (IS_ERR(ld)) {
-+ ret = PTR_ERR(ld);
-+ goto out_free_lcd;
++ host->mck = clk_get(&pdev->dev, "mci_clk");
++ if (IS_ERR(host->mck)) {
++ ret = PTR_ERR(host->mck);
++ goto out_free_host;
+ }
-+ lcd->ld = ld;
++ clk_enable(host->mck);
++
++ ret = -ENOMEM;
++ host->regs = ioremap(regs->start, regs->end - regs->start + 1);
++ if (!host->regs)
++ goto out_disable_clk;
++
++ host->bus_hz = clk_get_rate(host->mck);
++ host->mapbase = regs->start;
++
++ mmc->ops = &atmci_ops;
++ mmc->f_min = (host->bus_hz + 511) / 512;
++ mmc->f_max = min((unsigned int)(host->bus_hz / 2), fmax);
++ mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
++ mmc->caps |= MMC_CAP_4_BIT_DATA;
++
++ tasklet_init(&host->tasklet, atmci_tasklet_func, (unsigned long)mmc);
+
-+ ret = ltv350qv_power(lcd, FB_BLANK_UNBLANK);
++ ret = request_irq(irq, atmci_interrupt, 0, "mmci", mmc);
+ if (ret)
-+ goto out_unregister;
++ goto out_unmap;
++
++ /* Assume card is present if we don't have a detect pin */
++ host->present = 1;
++ if (host->detect_pin >= 0) {
++ if (gpio_request(host->detect_pin, "mmc_detect")) {
++ dev_dbg(&mmc->class_dev, "no detect pin available\n");
++ host->detect_pin = -1;
++ } else {
++ host->present = !gpio_get_value(host->detect_pin);
++ }
++ }
++ if (host->wp_pin >= 0) {
++ if (gpio_request(host->wp_pin, "mmc_wp")) {
++ dev_dbg(&mmc->class_dev, "no WP pin available\n");
++ host->wp_pin = -1;
++ }
++ }
++
++ /* TODO: Get this information from platform data */
++ ret = -ENOMEM;
++ host->dma.req.req.dmac = find_dma_controller(0);
++ if (!host->dma.req.req.dmac) {
++ dev_dbg(&mmc->class_dev, "no DMA controller available\n");
++ goto out_free_irq;
++ }
++ ret = dma_alloc_channel(host->dma.req.req.dmac);
++ if (ret < 0) {
++ dev_dbg(&mmc->class_dev, "unable to allocate DMA channel\n");
++ goto out_free_irq;
++ }
++ host->dma.req.req.channel = ret;
++ host->dma.req.width = DMA_WIDTH_32BIT;
++ host->dma.req.req.xfer_complete = atmci_xfer_complete;
++ host->dma.req.req.block_complete = NULL; // atmci_block_complete;
++ host->dma.req.req.error = atmci_dma_error;
++ host->dma.rx_periph_id = 0;
++ host->dma.tx_periph_id = 1;
++
++ mci_writel(host, CR, MCI_BIT(SWRST));
++ mci_writel(host, IDR, ~0UL);
++
++ platform_set_drvdata(pdev, host);
++
++ mmc_add_host(mmc);
++
++ if (host->detect_pin >= 0) {
++ setup_timer(&host->detect_timer, atmci_detect_change,
++ (unsigned long)host);
++
++ ret = request_irq(gpio_to_irq(host->detect_pin),
++ atmci_detect_interrupt,
++ IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
++ DRIVER_NAME, mmc);
++ if (ret) {
++ dev_dbg(&mmc->class_dev,
++ "could not request IRQ %d for detect pin\n",
++ gpio_to_irq(host->detect_pin));
++ gpio_free(host->detect_pin);
++ host->detect_pin = -1;
++ }
++ }
++
++ dev_info(&mmc->class_dev, "Atmel MCI controller at 0x%08lx irq %d\n",
++ host->mapbase, irq);
+
-+ dev_set_drvdata(&spi->dev, lcd);
++ atmci_init_debugfs(host);
+
+ return 0;
+
-+out_unregister:
-+ lcd_device_unregister(ld);
-+out_free_lcd:
-+ kfree(lcd);
++out_free_irq:
++ if (host->detect_pin >= 0)
++ gpio_free(host->detect_pin);
++ if (host->wp_pin >= 0)
++ gpio_free(host->wp_pin);
++ free_irq(irq, mmc);
++out_unmap:
++ iounmap(host->regs);
++out_disable_clk:
++ clk_disable(host->mck);
++ clk_put(host->mck);
++out_free_host:
++ mmc_free_host(mmc);
+ return ret;
+}
+
-+static int __devexit ltv350qv_remove(struct spi_device *spi)
++static int __devexit atmci_remove(struct platform_device *pdev)
+{
-+ struct ltv350qv *lcd = dev_get_drvdata(&spi->dev);
++ struct atmel_mci *host = platform_get_drvdata(pdev);
+
-+ ltv350qv_power(lcd, FB_BLANK_POWERDOWN);
-+ lcd_device_unregister(lcd->ld);
-+ kfree(lcd);
++ platform_set_drvdata(pdev, NULL);
+
-+ return 0;
-+}
++ if (host) {
++ atmci_cleanup_debugfs(host);
++
++ if (host->detect_pin >= 0) {
++ int pin = host->detect_pin;
++
++ /* Make sure our timer doesn't enable the interrupt */
++ host->detect_pin = -1;
++ smp_wmb();
+
-+#ifdef CONFIG_PM
-+static int ltv350qv_suspend(struct spi_device *spi,
-+ pm_message_t state, u32 level)
-+{
-+ struct ltv350qv *lcd = dev_get_drvdata(&spi->dev);
++ free_irq(gpio_to_irq(pin), host->mmc);
++ del_timer_sync(&host->detect_timer);
++ cancel_delayed_work(&host->mmc->detect);
++ gpio_free(pin);
++ }
+
-+ if (level == SUSPEND_POWER_DOWN)
-+ return ltv350qv_power(lcd, FB_BLANK_POWERDOWN);
++ mmc_remove_host(host->mmc);
+
-+ return 0;
-+}
++ mci_writel(host, IDR, ~0UL);
++ mci_writel(host, CR, MCI_BIT(MCIDIS));
++ mci_readl(host, SR);
+
-+static int ltv350qv_resume(struct spi_device *spi, u32 level)
-+{
-+ struct ltv350qv *lcd = dev_get_drvdata(&spi->dev);
++ dma_release_channel(host->dma.req.req.dmac,
++ host->dma.req.req.channel);
+
-+ if (level == RESUME_POWER_ON)
-+ return ltv350qv_power(lcd, FB_BLANK_UNBLANK);
++ if (host->wp_pin >= 0)
++ gpio_free(host->wp_pin);
+
-+ return 0;
-+}
-+#else
-+#define ltv350qv_suspend NULL
-+#define ltv350qv_resume NULL
-+#endif
++ free_irq(platform_get_irq(pdev, 0), host->mmc);
++ iounmap(host->regs);
+
-+/* Power down all displays on reboot, poweroff or halt */
-+static void ltv350qv_shutdown(struct spi_device *spi)
-+{
-+ struct ltv350qv *lcd = dev_get_drvdata(&spi->dev);
++ clk_disable(host->mck);
++ clk_put(host->mck);
+
-+ ltv350qv_power(lcd, FB_BLANK_POWERDOWN);
++ mmc_free_host(host->mmc);
++ }
++ return 0;
+}
+
-+static struct spi_driver ltv350qv_driver = {
-+ .driver = {
-+ .name = "ltv350qv",
-+ .bus = &spi_bus_type,
-+ .owner = THIS_MODULE,
++static struct platform_driver atmci_driver = {
++ .probe = atmci_probe,
++ .remove = __devexit_p(atmci_remove),
++ .driver = {
++ .name = DRIVER_NAME,
+ },
-+
-+ .probe = ltv350qv_probe,
-+ .remove = __devexit_p(ltv350qv_remove),
-+ .shutdown = ltv350qv_shutdown,
-+ .suspend = ltv350qv_suspend,
-+ .resume = ltv350qv_resume,
+};
+
-+static int __init ltv350qv_init(void)
++static int __init atmci_init(void)
+{
-+ return spi_register_driver(<v350qv_driver);
++ return platform_driver_register(&atmci_driver);
+}
+
-+static void __exit ltv350qv_exit(void)
++static void __exit atmci_exit(void)
+{
-+ spi_unregister_driver(<v350qv_driver);
++ platform_driver_unregister(&atmci_driver);
+}
-+module_init(ltv350qv_init);
-+module_exit(ltv350qv_exit);
+
-+MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
-+MODULE_DESCRIPTION("Samsung LTV350QV LCD Driver");
++module_init(atmci_init);
++module_exit(atmci_exit);
++
++MODULE_DESCRIPTION("Atmel Multimedia Card Interface driver");
+MODULE_LICENSE("GPL");
-diff --git a/drivers/video/backlight/ltv350qv.h b/drivers/video/backlight/ltv350qv.h
-new file mode 100644
-index 0000000..189112e
--- /dev/null
-+++ b/drivers/video/backlight/ltv350qv.h
-@@ -0,0 +1,95 @@
++++ b/drivers/mmc/host/atmel-mci.h
+@@ -0,0 +1,192 @@
+/*
-+ * Register definitions for Samsung LTV350QV Quarter VGA LCD Panel
-+ *
-+ * Copyright (C) 2006, 2007 Atmel Corporation
++ * Atmel MultiMedia Card Interface driver
+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#ifndef __LTV350QV_H
-+#define __LTV350QV_H
-+
-+#define LTV_OPC_INDEX 0x74
-+#define LTV_OPC_DATA 0x76
-+
-+#define LTV_ID 0x00 /* ID Read */
-+#define LTV_IFCTL 0x01 /* Display Interface Control */
-+#define LTV_DATACTL 0x02 /* Display Data Control */
-+#define LTV_ENTRY_MODE 0x03 /* Entry Mode */
-+#define LTV_GATECTL1 0x04 /* Gate Control 1 */
-+#define LTV_GATECTL2 0x05 /* Gate Control 2 */
-+#define LTV_VBP 0x06 /* Vertical Back Porch */
-+#define LTV_HBP 0x07 /* Horizontal Back Porch */
-+#define LTV_SOTCTL 0x08 /* Source Output Timing Control */
-+#define LTV_PWRCTL1 0x09 /* Power Control 1 */
-+#define LTV_PWRCTL2 0x0a /* Power Control 2 */
-+#define LTV_GAMMA(x) (0x10 + (x)) /* Gamma control */
-+
-+/* Bit definitions for LTV_IFCTL */
-+#define LTV_IM (1 << 15)
-+#define LTV_NMD (1 << 14)
-+#define LTV_SSMD (1 << 13)
-+#define LTV_REV (1 << 7)
-+#define LTV_NL(x) (((x) & 0x001f) << 0)
-+
-+/* Bit definitions for LTV_DATACTL */
-+#define LTV_DS_SAME (0 << 12)
-+#define LTV_DS_D_TO_S (1 << 12)
-+#define LTV_DS_S_TO_D (2 << 12)
-+#define LTV_CHS_384 (0 << 9)
-+#define LTV_CHS_480 (1 << 9)
-+#define LTV_CHS_492 (2 << 9)
-+#define LTV_DF_RGB (0 << 6)
-+#define LTV_DF_RGBX (1 << 6)
-+#define LTV_DF_XRGB (2 << 6)
-+#define LTV_RGB_RGB (0 << 2)
-+#define LTV_RGB_BGR (1 << 2)
-+#define LTV_RGB_GRB (2 << 2)
-+#define LTV_RGB_RBG (3 << 2)
-+
-+/* Bit definitions for LTV_ENTRY_MODE */
-+#define LTV_VSPL_ACTIVE_LOW (0 << 15)
-+#define LTV_VSPL_ACTIVE_HIGH (1 << 15)
-+#define LTV_HSPL_ACTIVE_LOW (0 << 14)
-+#define LTV_HSPL_ACTIVE_HIGH (1 << 14)
-+#define LTV_DPL_SAMPLE_RISING (0 << 13)
-+#define LTV_DPL_SAMPLE_FALLING (1 << 13)
-+#define LTV_EPL_ACTIVE_LOW (0 << 12)
-+#define LTV_EPL_ACTIVE_HIGH (1 << 12)
-+#define LTV_SS_LEFT_TO_RIGHT (0 << 8)
-+#define LTV_SS_RIGHT_TO_LEFT (1 << 8)
-+#define LTV_STB (1 << 1)
-+
-+/* Bit definitions for LTV_GATECTL1 */
-+#define LTV_CLW(x) (((x) & 0x0007) << 12)
-+#define LTV_GAON (1 << 5)
-+#define LTV_SDR (1 << 3)
-+
-+/* Bit definitions for LTV_GATECTL2 */
-+#define LTV_NW_INV_FRAME (0 << 14)
-+#define LTV_NW_INV_1LINE (1 << 14)
-+#define LTV_NW_INV_2LINE (2 << 14)
-+#define LTV_DSC (1 << 12)
-+#define LTV_GIF (1 << 8)
-+#define LTV_FHN (1 << 7)
-+#define LTV_FTI(x) (((x) & 0x0003) << 4)
-+#define LTV_FWI(x) (((x) & 0x0003) << 0)
-+
-+/* Bit definitions for LTV_SOTCTL */
-+#define LTV_SDT(x) (((x) & 0x0007) << 10)
-+#define LTV_EQ(x) (((x) & 0x0007) << 2)
-+
-+/* Bit definitions for LTV_PWRCTL1 */
-+#define LTV_VCOM_DISABLE (1 << 14)
-+#define LTV_VCOMOUT_ENABLE (1 << 11)
-+#define LTV_POWER_ON (1 << 9)
-+#define LTV_DRIVE_CURRENT(x) (((x) & 0x0007) << 4) /* 0=off, 5=max */
-+#define LTV_SUPPLY_CURRENT(x) (((x) & 0x0007) << 0) /* 0=off, 5=max */
-+
-+/* Bit definitions for LTV_PWRCTL2 */
-+#define LTV_VCOML_ENABLE (1 << 13)
-+#define LTV_VCOML_VOLTAGE(x) (((x) & 0x001f) << 8) /* 0=1V, 31=-1V */
-+#define LTV_VCOMH_VOLTAGE(x) (((x) & 0x001f) << 0) /* 0=3V, 31=4.5V */
-+
-+#endif /* __LTV350QV_H */
-diff --git a/include/asm-avr32/arch-at32ap/board.h b/include/asm-avr32/arch-at32ap/board.h
-index 0215965..e1318e0 100644
---- a/include/asm-avr32/arch-at32ap/board.h
-+++ b/include/asm-avr32/arch-at32ap/board.h
-@@ -6,6 +6,8 @@
-
- #include <linux/types.h>
-
-+#define GPIO_PIN_NONE (-1)
-+
- /* Add basic devices: system manager, interrupt controller, portmuxes, etc. */
- void at32_add_system_devices(void);
-
-@@ -31,11 +33,26 @@ struct spi_board_info;
- struct platform_device *
- at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n);
-
-+struct platform_device *at32_add_device_twi(unsigned int id);
-+
-+struct mci_platform_data {
-+ int detect_pin;
-+ int wp_pin;
-+};
-+struct platform_device *
-+at32_add_device_mci(unsigned int id, struct mci_platform_data *data);
-+
- struct atmel_lcdfb_info;
- struct platform_device *
- at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
- unsigned long fbmem_start, unsigned long fbmem_len);
-
-+struct usba_platform_data {
-+ int vbus_pin;
-+};
-+struct platform_device *
-+at32_add_device_usba(unsigned int id, struct usba_platform_data *data);
-+
- /* depending on what's hooked up, not all SSC pins will be used */
- #define ATMEL_SSC_TK 0x01
- #define ATMEL_SSC_TF 0x02
-@@ -50,4 +67,7 @@ at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
- struct platform_device *
- at32_add_device_ssc(unsigned int id, unsigned int flags);
-
-+struct platform_device *at32_add_device_ac97c(unsigned int id);
-+struct platform_device *at32_add_device_abdac(unsigned int id);
-+
- #endif /* __ASM_ARCH_BOARD_H */
-diff --git a/include/asm-avr32/arch-at32ap/portmux.h b/include/asm-avr32/arch-at32ap/portmux.h
-index 9930871..135e034 100644
---- a/include/asm-avr32/arch-at32ap/portmux.h
-+++ b/include/asm-avr32/arch-at32ap/portmux.h
-@@ -19,10 +19,23 @@
- #define AT32_GPIOF_OUTPUT 0x00000002 /* (OUT) Enable output driver */
- #define AT32_GPIOF_HIGH 0x00000004 /* (OUT) Set output high */
- #define AT32_GPIOF_DEGLITCH 0x00000008 /* (IN) Filter glitches */
-+#define AT32_GPIOF_MULTIDRV 0x00000010 /* Enable multidriver option */
-
- void at32_select_periph(unsigned int pin, unsigned int periph,
- unsigned long flags);
- void at32_select_gpio(unsigned int pin, unsigned long flags);
- void at32_reserve_pin(unsigned int pin);
-
-+#ifdef CONFIG_GPIO_DEV
-+
-+/* Gang allocators and accessors; used by the GPIO /dev driver */
-+int at32_gpio_port_is_valid(unsigned int port);
-+int at32_select_gpio_pins(unsigned int port, u32 pins, u32 oe_mask);
-+void at32_deselect_pins(unsigned int port, u32 pins);
-+
-+u32 at32_gpio_get_value_multiple(unsigned int port, u32 pins);
-+void at32_gpio_set_value_multiple(unsigned int port, u32 value, u32 mask);
-+
-+#endif /* CONFIG_GPIO_DEV */
-+
- #endif /* __ASM_ARCH_PORTMUX_H__ */
-diff --git a/include/asm-avr32/arch-at32ap/smc.h b/include/asm-avr32/arch-at32ap/smc.h
-index 07152b7..c98eea4 100644
---- a/include/asm-avr32/arch-at32ap/smc.h
-+++ b/include/asm-avr32/arch-at32ap/smc.h
-@@ -15,22 +15,50 @@
- /*
- * All timing parameters are in nanoseconds.
- */
-+struct smc_timing {
-+ /* Delay from address valid to assertion of given strobe */
-+ int ncs_read_setup;
-+ int nrd_setup;
-+ int ncs_write_setup;
-+ int nwe_setup;
-+
-+ /* Pulse length of given strobe */
-+ int ncs_read_pulse;
-+ int nrd_pulse;
-+ int ncs_write_pulse;
-+ int nwe_pulse;
-+
-+ /* Total cycle length of given operation */
-+ int read_cycle;
-+ int write_cycle;
-+
-+ /* Minimal recovery times, will extend cycle if needed */
-+ int ncs_read_recover;
-+ int nrd_recover;
-+ int ncs_write_recover;
-+ int nwe_recover;
-+};
-+
-+/*
-+ * All timing parameters are in clock cycles.
-+ */
- struct smc_config {
-+
- /* Delay from address valid to assertion of given strobe */
-- u16 ncs_read_setup;
-- u16 nrd_setup;
-- u16 ncs_write_setup;
-- u16 nwe_setup;
-+ u8 ncs_read_setup;
-+ u8 nrd_setup;
-+ u8 ncs_write_setup;
-+ u8 nwe_setup;
-
- /* Pulse length of given strobe */
-- u16 ncs_read_pulse;
-- u16 nrd_pulse;
-- u16 ncs_write_pulse;
-- u16 nwe_pulse;
-+ u8 ncs_read_pulse;
-+ u8 nrd_pulse;
-+ u8 ncs_write_pulse;
-+ u8 nwe_pulse;
-
- /* Total cycle length of given operation */
-- u16 read_cycle;
-- u16 write_cycle;
-+ u8 read_cycle;
-+ u8 write_cycle;
-
- /* Bus width in bytes */
- u8 bus_width;
-@@ -76,6 +104,9 @@ struct smc_config {
- unsigned int tdf_mode:1;
- };
-
-+extern void smc_set_timing(struct smc_config *config,
-+ const struct smc_timing *timing);
-+
- extern int smc_set_configuration(int cs, const struct smc_config *config);
- extern struct smc_config *smc_get_configuration(int cs);
-
-diff --git a/include/asm-avr32/dma-controller.h b/include/asm-avr32/dma-controller.h
-new file mode 100644
-index 0000000..56a4965
---- /dev/null
-+++ b/include/asm-avr32/dma-controller.h
-@@ -0,0 +1,166 @@
-+/*
-+ * Copyright (C) 2005-2006 Atmel Corporation
++ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
-+#ifndef __ASM_AVR32_DMA_CONTROLLER_H
-+#define __ASM_AVR32_DMA_CONTROLLER_H
-+
-+#include <linux/device.h>
-+
-+#define DMA_DIR_MEM_TO_MEM 0x0000
-+#define DMA_DIR_MEM_TO_PERIPH 0x0001
-+#define DMA_DIR_PERIPH_TO_MEM 0x0002
-+#define DMA_DIR_PERIPH_TO_PERIPH 0x0003
-+
-+#define DMA_WIDTH_8BIT 0
-+#define DMA_WIDTH_16BIT 1
-+#define DMA_WIDTH_32BIT 2
-+
-+struct dma_request {
-+ struct dma_controller *dmac;
-+ struct list_head list;
-+
-+ unsigned short channel;
++#ifndef __DRIVERS_MMC_ATMEL_MCI_H__
++#define __DRIVERS_MMC_ATMEL_MCI_H__
+
-+ void (*xfer_complete)(struct dma_request *req);
-+ void (*block_complete)(struct dma_request *req);
-+ void (*error)(struct dma_request *req);
-+};
++/* MCI register offsets */
++#define MCI_CR 0x0000
++#define MCI_MR 0x0004
++#define MCI_DTOR 0x0008
++#define MCI_SDCR 0x000c
++#define MCI_ARGR 0x0010
++#define MCI_CMDR 0x0014
++#define MCI_BLKR 0x0018
++#define MCI_RSPR 0x0020
++#define MCI_RSPR1 0x0024
++#define MCI_RSPR2 0x0028
++#define MCI_RSPR3 0x002c
++#define MCI_RDR 0x0030
++#define MCI_TDR 0x0034
++#define MCI_SR 0x0040
++#define MCI_IER 0x0044
++#define MCI_IDR 0x0048
++#define MCI_IMR 0x004c
+
-+struct dma_request_sg {
-+ struct dma_request req;
++/* Bitfields in CR */
++#define MCI_MCIEN_OFFSET 0
++#define MCI_MCIEN_SIZE 1
++#define MCI_MCIDIS_OFFSET 1
++#define MCI_MCIDIS_SIZE 1
++#define MCI_PWSEN_OFFSET 2
++#define MCI_PWSEN_SIZE 1
++#define MCI_PWSDIS_OFFSET 3
++#define MCI_PWSDIS_SIZE 1
++#define MCI_SWRST_OFFSET 7
++#define MCI_SWRST_SIZE 1
+
-+ int nr_sg;
-+ struct scatterlist *sg;
-+ unsigned long block_size;
-+ unsigned int nr_blocks;
++/* Bitfields in MR */
++#define MCI_CLKDIV_OFFSET 0
++#define MCI_CLKDIV_SIZE 8
++#define MCI_PWSDIV_OFFSET 8
++#define MCI_PWSDIV_SIZE 3
++#define MCI_RDPROOF_OFFSET 11
++#define MCI_RDPROOF_SIZE 1
++#define MCI_WRPROOF_OFFSET 12
++#define MCI_WRPROOF_SIZE 1
++#define MCI_DMAPADV_OFFSET 14
++#define MCI_DMAPADV_SIZE 1
++#define MCI_BLKLEN_OFFSET 16
++#define MCI_BLKLEN_SIZE 16
+
-+ dma_addr_t data_reg;
-+ unsigned short periph_id;
++/* Bitfields in DTOR */
++#define MCI_DTOCYC_OFFSET 0
++#define MCI_DTOCYC_SIZE 4
++#define MCI_DTOMUL_OFFSET 4
++#define MCI_DTOMUL_SIZE 3
+
-+ unsigned char direction;
-+ unsigned char width;
-+};
-+#define to_dma_request_sg(_req) \
-+ container_of(_req, struct dma_request_sg, req)
++/* Bitfields in SDCR */
++#define MCI_SDCSEL_OFFSET 0
++#define MCI_SDCSEL_SIZE 4
++#define MCI_SDCBUS_OFFSET 7
++#define MCI_SDCBUS_SIZE 1
+
-+struct dma_request_cyclic {
-+ struct dma_request req;
++/* Bitfields in ARGR */
++#define MCI_ARG_OFFSET 0
++#define MCI_ARG_SIZE 32
+
-+ int periods;
-+ unsigned long buffer_size;
++/* Bitfields in CMDR */
++#define MCI_CMDNB_OFFSET 0
++#define MCI_CMDNB_SIZE 6
++#define MCI_RSPTYP_OFFSET 6
++#define MCI_RSPTYP_SIZE 2
++#define MCI_SPCMD_OFFSET 8
++#define MCI_SPCMD_SIZE 3
++#define MCI_OPDCMD_OFFSET 11
++#define MCI_OPDCMD_SIZE 1
++#define MCI_MAXLAT_OFFSET 12
++#define MCI_MAXLAT_SIZE 1
++#define MCI_TRCMD_OFFSET 16
++#define MCI_TRCMD_SIZE 2
++#define MCI_TRDIR_OFFSET 18
++#define MCI_TRDIR_SIZE 1
++#define MCI_TRTYP_OFFSET 19
++#define MCI_TRTYP_SIZE 2
+
-+ dma_addr_t buffer_start;
-+ dma_addr_t data_reg;
++/* Bitfields in BLKR */
++#define MCI_BCNT_OFFSET 0
++#define MCI_BCNT_SIZE 16
+
-+ unsigned short periph_id;
-+ unsigned char direction;
-+ unsigned char width;
++/* Bitfields in RSPRn */
++#define MCI_RSP_OFFSET 0
++#define MCI_RSP_SIZE 32
+
-+ void *dev_id;
-+};
-+#define to_dma_request_cyclic(_req) \
-+ container_of(_req, struct dma_request_cyclic, req)
++/* Bitfields in SR/IER/IDR/IMR */
++#define MCI_CMDRDY_OFFSET 0
++#define MCI_CMDRDY_SIZE 1
++#define MCI_RXRDY_OFFSET 1
++#define MCI_RXRDY_SIZE 1
++#define MCI_TXRDY_OFFSET 2
++#define MCI_TXRDY_SIZE 1
++#define MCI_BLKE_OFFSET 3
++#define MCI_BLKE_SIZE 1
++#define MCI_DTIP_OFFSET 4
++#define MCI_DTIP_SIZE 1
++#define MCI_NOTBUSY_OFFSET 5
++#define MCI_NOTBUSY_SIZE 1
++#define MCI_ENDRX_OFFSET 6
++#define MCI_ENDRX_SIZE 1
++#define MCI_ENDTX_OFFSET 7
++#define MCI_ENDTX_SIZE 1
++#define MCI_RXBUFF_OFFSET 14
++#define MCI_RXBUFF_SIZE 1
++#define MCI_TXBUFE_OFFSET 15
++#define MCI_TXBUFE_SIZE 1
++#define MCI_RINDE_OFFSET 16
++#define MCI_RINDE_SIZE 1
++#define MCI_RDIRE_OFFSET 17
++#define MCI_RDIRE_SIZE 1
++#define MCI_RCRCE_OFFSET 18
++#define MCI_RCRCE_SIZE 1
++#define MCI_RENDE_OFFSET 19
++#define MCI_RENDE_SIZE 1
++#define MCI_RTOE_OFFSET 20
++#define MCI_RTOE_SIZE 1
++#define MCI_DCRCE_OFFSET 21
++#define MCI_DCRCE_SIZE 1
++#define MCI_DTOE_OFFSET 22
++#define MCI_DTOE_SIZE 1
++#define MCI_OVRE_OFFSET 30
++#define MCI_OVRE_SIZE 1
++#define MCI_UNRE_OFFSET 31
++#define MCI_UNRE_SIZE 1
+
-+struct dma_request_memcpy {
-+ struct dma_request req;
++/* Constants for DTOMUL */
++#define MCI_DTOMUL_1_CYCLE 0
++#define MCI_DTOMUL_16_CYCLES 1
++#define MCI_DTOMUL_128_CYCLES 2
++#define MCI_DTOMUL_256_CYCLES 3
++#define MCI_DTOMUL_1024_CYCLES 4
++#define MCI_DTOMUL_4096_CYCLES 5
++#define MCI_DTOMUL_65536_CYCLES 6
++#define MCI_DTOMUL_1048576_CYCLES 7
+
-+ dma_addr_t src_addr;
-+ unsigned int src_width;
-+ unsigned int src_stride;
++/* Constants for RSPTYP */
++#define MCI_RSPTYP_NO_RESP 0
++#define MCI_RSPTYP_48_BIT 1
++#define MCI_RSPTYP_136_BIT 2
+
-+ dma_addr_t dst_addr;
-+ unsigned int dst_width;
-+ unsigned int dst_stride;
++/* Constants for SPCMD */
++#define MCI_SPCMD_NO_SPEC_CMD 0
++#define MCI_SPCMD_INIT_CMD 1
++#define MCI_SPCMD_SYNC_CMD 2
++#define MCI_SPCMD_INT_CMD 4
++#define MCI_SPCMD_INT_RESP 5
+
-+ size_t length;
++/* Constants for TRCMD */
++#define MCI_TRCMD_NO_TRANS 0
++#define MCI_TRCMD_START_TRANS 1
++#define MCI_TRCMD_STOP_TRANS 2
+
-+ unsigned short src_reverse:1;
-+ unsigned short dst_reverse:1;
-+};
-+#define to_dma_request_memcpy(_req) \
-+ container_of(_req, struct dma_request_memcpy, req)
++/* Constants for TRTYP */
++#define MCI_TRTYP_BLOCK 0
++#define MCI_TRTYP_MULTI_BLOCK 1
++#define MCI_TRTYP_STREAM 2
+
-+struct dma_controller {
-+ struct list_head list;
-+ int id;
-+ struct device *dev;
++/* Bit manipulation macros */
++#define MCI_BIT(name) \
++ (1 << MCI_##name##_OFFSET)
++#define MCI_BF(name,value) \
++ (((value) & ((1 << MCI_##name##_SIZE) - 1)) \
++ << MCI_##name##_OFFSET)
++#define MCI_BFEXT(name,value) \
++ (((value) >> MCI_##name##_OFFSET) \
++ & ((1 << MCI_##name##_SIZE) - 1))
++#define MCI_BFINS(name,value,old) \
++ (((old) & ~(((1 << MCI_##name##_SIZE) - 1) \
++ << MCI_##name##_OFFSET)) \
++ | MCI_BF(name,value))
+
-+ int (*alloc_channel)(struct dma_controller *dmac);
-+ void (*release_channel)(struct dma_controller *dmac,
-+ int channel);
-+ int (*prepare_request_sg)(struct dma_controller *dmac,
-+ struct dma_request_sg *req);
-+ int (*prepare_request_cyclic)(struct dma_controller *dmac,
-+ struct dma_request_cyclic *req);
-+ int (*prepare_request_memcpy)(struct dma_controller *dmac,
-+ struct dma_request_memcpy *req);
-+ int (*start_request)(struct dma_controller *dmac,
-+ unsigned int channel);
-+ int (*stop_request)(struct dma_controller *dmac,
-+ unsigned int channel);
-+ dma_addr_t (*get_current_pos)(struct dma_controller *dmac,
-+ unsigned int channel);
-+};
++/* Register access macros */
++#define mci_readl(port,reg) \
++ __raw_readl((port)->regs + MCI_##reg)
++#define mci_writel(port,reg,value) \
++ __raw_writel((value), (port)->regs + MCI_##reg)
+
-+static inline int
-+dma_alloc_channel(struct dma_controller *dmac)
-+{
-+ return dmac->alloc_channel(dmac);
-+}
++#endif /* __DRIVERS_MMC_ATMEL_MCI_H__ */
+--- a/drivers/mtd/nand/Kconfig
++++ b/drivers/mtd/nand/Kconfig
+@@ -272,12 +272,54 @@ config MTD_NAND_CS553X
+
+ If you say "m", the module will be called "cs553x_nand.ko".
+
+-config MTD_NAND_AT91
+- bool "Support for NAND Flash / SmartMedia on AT91"
+- depends on ARCH_AT91
++config MTD_NAND_ATMEL
++ bool "Support for NAND Flash / SmartMedia on AT91 and AVR32"
++ depends on ARCH_AT91 || AVR32
+ help
+ Enables support for NAND Flash / Smart Media Card interface
+- on Atmel AT91 processors.
++ on Atmel AT91 and AVR32 processors.
++choice
++ prompt "ECC management for NAND Flash / SmartMedia on AT91 / AVR32"
++ depends on MTD_NAND_ATMEL
++
++config MTD_NAND_ATMEL_ECC_HW
++ bool "Hardware ECC"
++ depends on ARCH_AT91SAM9263 || ARCH_AT91SAM9260 || AVR32
++ help
++ Use hardware ECC instead of software ECC when the chip
++ supports it.
+
-+static inline void
-+dma_release_channel(struct dma_controller *dmac, int chan)
-+{
-+ dmac->release_channel(dmac, chan);
-+}
++ The hardware ECC controller is capable of single bit error
++ correction and 2-bit random detection per page.
+
-+static inline int
-+dma_prepare_request_sg(struct dma_controller *dmac,
-+ struct dma_request_sg *req)
-+{
-+ return dmac->prepare_request_sg(dmac, req);
-+}
++ NB : hardware and software ECC schemes are incompatible.
++ If you switch from one to another, you'll have to erase your
++ mtd partition.
+
-+static inline int
-+dma_prepare_request_cyclic(struct dma_controller *dmac,
-+ struct dma_request_cyclic *req)
-+{
-+ return dmac->prepare_request_cyclic(dmac, req);
-+}
++ If unsure, say Y
+
-+static inline int
-+dma_prepare_request_memcpy(struct dma_controller *dmac,
-+ struct dma_request_memcpy *req)
-+{
-+ return dmac->prepare_request_memcpy(dmac, req);
-+}
++config MTD_NAND_ATMEL_ECC_SOFT
++ bool "Software ECC"
++ help
++ Use software ECC.
+
-+static inline int
-+dma_start_request(struct dma_controller *dmac,
-+ unsigned int channel)
-+{
-+ return dmac->start_request(dmac, channel);
-+}
++ NB : hardware and software ECC schemes are incompatible.
++ If you switch from one to another, you'll have to erase your
++ mtd partition.
+
-+static inline int
-+dma_stop_request(struct dma_controller *dmac,
-+ unsigned int channel)
-+{
-+ return dmac->stop_request(dmac, channel);
-+}
++config MTD_NAND_ATMEL_ECC_NONE
++ bool "No ECC (testing only, DANGEROUS)"
++ depends on DEBUG_KERNEL
++ help
++ No ECC will be used.
++ It's not a good idea and it should be reserved for testing
++ purpose only.
+
-+static inline dma_addr_t
-+dma_get_current_pos(struct dma_controller *dmac,
-+ unsigned int channel)
-+{
-+ return dmac->get_current_pos(dmac, channel);
-+}
++ If unsure, say N
+
-+extern int register_dma_controller(struct dma_controller *dmac);
-+extern struct dma_controller *find_dma_controller(int id);
++ endchoice
+
-+#endif /* __ASM_AVR32_DMA_CONTROLLER_H */
-diff --git a/include/asm-avr32/dma-mapping.h b/include/asm-avr32/dma-mapping.h
-index 21bb60b..81e3426 100644
---- a/include/asm-avr32/dma-mapping.h
-+++ b/include/asm-avr32/dma-mapping.h
-@@ -264,7 +264,11 @@ static inline void
- dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle,
- size_t size, enum dma_data_direction direction)
- {
-- dma_cache_sync(dev, bus_to_virt(dma_handle), size, direction);
-+ /*
-+ * No need to do anything since the CPU isn't supposed to
-+ * touch this memory after we flushed it at mapping- or
-+ * sync-for-device time.
-+ */
- }
++endchoice
- static inline void
-@@ -309,12 +313,11 @@ static inline void
- dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
- int nents, enum dma_data_direction direction)
- {
-- int i;
+ config MTD_NAND_CM_X270
+ tristate "Support for NAND Flash on CM-X270 modules"
+--- a/drivers/mtd/nand/Makefile
++++ b/drivers/mtd/nand/Makefile
+@@ -24,7 +24,7 @@ obj-$(CONFIG_MTD_NAND_TS7250) += ts7250
+ obj-$(CONFIG_MTD_NAND_NANDSIM) += nandsim.o
+ obj-$(CONFIG_MTD_NAND_CS553X) += cs553x_nand.o
+ obj-$(CONFIG_MTD_NAND_NDFC) += ndfc.o
+-obj-$(CONFIG_MTD_NAND_AT91) += at91_nand.o
++obj-$(CONFIG_MTD_NAND_ATMEL) += atmel_nand.o
+ obj-$(CONFIG_MTD_NAND_CM_X270) += cmx270_nand.o
+ obj-$(CONFIG_MTD_NAND_BASLER_EXCITE) += excite_nandflash.o
+ obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o
+--- a/drivers/mtd/nand/at91_nand.c
++++ /dev/null
+@@ -1,236 +0,0 @@
+-/*
+- * drivers/mtd/nand/at91_nand.c
+- *
+- * Copyright (C) 2003 Rick Bronson
+- *
+- * Derived from drivers/mtd/nand/autcpu12.c
+- * Copyright (c) 2001 Thomas Gleixner (gleixner@autronix.de)
+- *
+- * Derived from drivers/mtd/spia.c
+- * Copyright (C) 2000 Steven J. Hill (sjhill@cotw.com)
+- *
+- * This program is free software; you can redistribute it and/or modify
+- * it under the terms of the GNU General Public License version 2 as
+- * published by the Free Software Foundation.
+- *
+- */
+-
+-#include <linux/slab.h>
+-#include <linux/module.h>
+-#include <linux/platform_device.h>
+-#include <linux/mtd/mtd.h>
+-#include <linux/mtd/nand.h>
+-#include <linux/mtd/partitions.h>
+-
+-#include <asm/io.h>
+-#include <asm/sizes.h>
+-
+-#include <asm/hardware.h>
+-#include <asm/arch/board.h>
+-#include <asm/arch/gpio.h>
+-
+-struct at91_nand_host {
+- struct nand_chip nand_chip;
+- struct mtd_info mtd;
+- void __iomem *io_base;
+- struct at91_nand_data *board;
+-};
+-
+-/*
+- * Hardware specific access to control-lines
+- */
+-static void at91_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+-{
+- struct nand_chip *nand_chip = mtd->priv;
+- struct at91_nand_host *host = nand_chip->priv;
+-
+- if (cmd == NAND_CMD_NONE)
+- return;
+-
+- if (ctrl & NAND_CLE)
+- writeb(cmd, host->io_base + (1 << host->board->cle));
+- else
+- writeb(cmd, host->io_base + (1 << host->board->ale));
+-}
+-
+-/*
+- * Read the Device Ready pin.
+- */
+-static int at91_nand_device_ready(struct mtd_info *mtd)
+-{
+- struct nand_chip *nand_chip = mtd->priv;
+- struct at91_nand_host *host = nand_chip->priv;
+-
+- return at91_get_gpio_value(host->board->rdy_pin);
+-}
+-
+-/*
+- * Enable NAND.
+- */
+-static void at91_nand_enable(struct at91_nand_host *host)
+-{
+- if (host->board->enable_pin)
+- at91_set_gpio_value(host->board->enable_pin, 0);
+-}
+-
+-/*
+- * Disable NAND.
+- */
+-static void at91_nand_disable(struct at91_nand_host *host)
+-{
+- if (host->board->enable_pin)
+- at91_set_gpio_value(host->board->enable_pin, 1);
+-}
+-
+-#ifdef CONFIG_MTD_PARTITIONS
+-const char *part_probes[] = { "cmdlinepart", NULL };
+-#endif
-
-- for (i = 0; i < nents; i++) {
-- dma_cache_sync(dev, page_address(sg[i].page) + sg[i].offset,
-- sg[i].length, direction);
+-/*
+- * Probe for the NAND device.
+- */
+-static int __init at91_nand_probe(struct platform_device *pdev)
+-{
+- struct at91_nand_host *host;
+- struct mtd_info *mtd;
+- struct nand_chip *nand_chip;
+- int res;
+-
+-#ifdef CONFIG_MTD_PARTITIONS
+- struct mtd_partition *partitions = NULL;
+- int num_partitions = 0;
+-#endif
+-
+- /* Allocate memory for the device structure (and zero it) */
+- host = kzalloc(sizeof(struct at91_nand_host), GFP_KERNEL);
+- if (!host) {
+- printk(KERN_ERR "at91_nand: failed to allocate device structure.\n");
+- return -ENOMEM;
- }
-+ /*
-+ * No need to do anything since the CPU isn't supposed to
-+ * touch this memory after we flushed it at mapping- or
-+ * sync-for-device time.
-+ */
- }
-
- static inline void
-diff --git a/include/asm-avr32/system.h b/include/asm-avr32/system.h
-index a8236ba..dc2d527 100644
---- a/include/asm-avr32/system.h
-+++ b/include/asm-avr32/system.h
-@@ -73,11 +73,16 @@ extern struct task_struct *__switch_to(struct task_struct *,
-
- extern void __xchg_called_with_bad_pointer(void);
-
--#ifdef __CHECKER__
--extern unsigned long __builtin_xchg(void *ptr, unsigned long x);
+-
+- host->io_base = ioremap(pdev->resource[0].start,
+- pdev->resource[0].end - pdev->resource[0].start + 1);
+- if (host->io_base == NULL) {
+- printk(KERN_ERR "at91_nand: ioremap failed\n");
+- kfree(host);
+- return -EIO;
+- }
+-
+- mtd = &host->mtd;
+- nand_chip = &host->nand_chip;
+- host->board = pdev->dev.platform_data;
+-
+- nand_chip->priv = host; /* link the private data structures */
+- mtd->priv = nand_chip;
+- mtd->owner = THIS_MODULE;
+-
+- /* Set address of NAND IO lines */
+- nand_chip->IO_ADDR_R = host->io_base;
+- nand_chip->IO_ADDR_W = host->io_base;
+- nand_chip->cmd_ctrl = at91_nand_cmd_ctrl;
+-
+- if (host->board->rdy_pin)
+- nand_chip->dev_ready = at91_nand_device_ready;
+-
+- nand_chip->ecc.mode = NAND_ECC_SOFT; /* enable ECC */
+- nand_chip->chip_delay = 20; /* 20us command delay time */
+-
+- if (host->board->bus_width_16) /* 16-bit bus width */
+- nand_chip->options |= NAND_BUSWIDTH_16;
+-
+- platform_set_drvdata(pdev, host);
+- at91_nand_enable(host);
+-
+- if (host->board->det_pin) {
+- if (at91_get_gpio_value(host->board->det_pin)) {
+- printk ("No SmartMedia card inserted.\n");
+- res = ENXIO;
+- goto out;
+- }
+- }
+-
+- /* Scan to find existance of the device */
+- if (nand_scan(mtd, 1)) {
+- res = -ENXIO;
+- goto out;
+- }
+-
+-#ifdef CONFIG_MTD_PARTITIONS
+-#ifdef CONFIG_MTD_CMDLINE_PARTS
+- mtd->name = "at91_nand";
+- num_partitions = parse_mtd_partitions(mtd, part_probes,
+- &partitions, 0);
-#endif
-+static inline unsigned long xchg_u32(u32 val, volatile u32 *m)
-+{
-+ u32 ret;
-
--#define xchg_u32(val, m) __builtin_xchg((void *)m, val)
-+ asm volatile("xchg %[ret], %[m], %[val]"
-+ : [ret] "=&r"(ret), "=m"(*m)
-+ : "m"(*m), [m] "r"(m), [val] "r"(val)
-+ : "memory");
-+ return ret;
-+}
-
- static inline unsigned long __xchg(unsigned long x,
- volatile void *ptr,
-diff --git a/include/asm-avr32/unistd.h b/include/asm-avr32/unistd.h
-index 3b4e35b..de09009 100644
---- a/include/asm-avr32/unistd.h
-+++ b/include/asm-avr32/unistd.h
-@@ -303,6 +303,19 @@
- #ifdef __KERNEL__
- #define NR_syscalls 282
-
-+/* Old stuff */
-+#define __IGNORE_uselib
-+#define __IGNORE_mmap
-+
-+/* NUMA stuff */
-+#define __IGNORE_mbind
-+#define __IGNORE_get_mempolicy
-+#define __IGNORE_set_mempolicy
-+#define __IGNORE_migrate_pages
-+#define __IGNORE_move_pages
-+
-+/* SMP stuff */
-+#define __IGNORE_getcpu
-
- #define __ARCH_WANT_IPC_PARSE_VERSION
- #define __ARCH_WANT_STAT64
-diff --git a/include/linux/atmel-ssc.h b/include/linux/atmel-ssc.h
-new file mode 100644
-index 0000000..0602339
+- if (num_partitions <= 0 && host->board->partition_info)
+- partitions = host->board->partition_info(mtd->size,
+- &num_partitions);
+-
+- if ((!partitions) || (num_partitions == 0)) {
+- printk(KERN_ERR "at91_nand: No parititions defined, or unsupported device.\n");
+- res = ENXIO;
+- goto release;
+- }
+-
+- res = add_mtd_partitions(mtd, partitions, num_partitions);
+-#else
+- res = add_mtd_device(mtd);
+-#endif
+-
+- if (!res)
+- return res;
+-
+-release:
+- nand_release(mtd);
+-out:
+- at91_nand_disable(host);
+- platform_set_drvdata(pdev, NULL);
+- iounmap(host->io_base);
+- kfree(host);
+- return res;
+-}
+-
+-/*
+- * Remove a NAND device.
+- */
+-static int __devexit at91_nand_remove(struct platform_device *pdev)
+-{
+- struct at91_nand_host *host = platform_get_drvdata(pdev);
+- struct mtd_info *mtd = &host->mtd;
+-
+- nand_release(mtd);
+-
+- at91_nand_disable(host);
+-
+- iounmap(host->io_base);
+- kfree(host);
+-
+- return 0;
+-}
+-
+-static struct platform_driver at91_nand_driver = {
+- .probe = at91_nand_probe,
+- .remove = at91_nand_remove,
+- .driver = {
+- .name = "at91_nand",
+- .owner = THIS_MODULE,
+- },
+-};
+-
+-static int __init at91_nand_init(void)
+-{
+- return platform_driver_register(&at91_nand_driver);
+-}
+-
+-
+-static void __exit at91_nand_exit(void)
+-{
+- platform_driver_unregister(&at91_nand_driver);
+-}
+-
+-
+-module_init(at91_nand_init);
+-module_exit(at91_nand_exit);
+-
+-MODULE_LICENSE("GPL");
+-MODULE_AUTHOR("Rick Bronson");
+-MODULE_DESCRIPTION("NAND/SmartMedia driver for AT91RM9200");
--- /dev/null
-+++ b/include/linux/atmel-ssc.h
-@@ -0,0 +1,312 @@
-+#ifndef __INCLUDE_ATMEL_SSC_H
-+#define __INCLUDE_ATMEL_SSC_H
++++ b/drivers/mtd/nand/atmel_nand.c
+@@ -0,0 +1,650 @@
++/*
++ * Copyright (C) 2003 Rick Bronson
++ *
++ * Derived from drivers/mtd/nand/autcpu12.c
++ * Copyright (c) 2001 Thomas Gleixner (gleixner@autronix.de)
++ *
++ * Derived from drivers/mtd/spia.c
++ * Copyright (C) 2000 Steven J. Hill (sjhill@cotw.com)
++ *
++ *
++ * Add Hardware ECC support for AT91SAM9260 / AT91SAM9263
++ * Richard Genoud (richard.genoud@gmail.com), Adeneo Copyright (C) 2007
++ *
++ * Derived from Das U-Boot source code
++ * (u-boot-1.1.5/board/atmel/at91sam9263ek/nand.c)
++ * (C) Copyright 2006 ATMEL Rousset, Lacressonniere Nicolas
++ *
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
+
++#include <linux/slab.h>
++#include <linux/module.h>
+#include <linux/platform_device.h>
-+#include <linux/list.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/nand.h>
++#include <linux/mtd/partitions.h>
+
-+struct ssc_device {
-+ struct list_head list;
-+ void __iomem *regs;
-+ struct platform_device *pdev;
-+ struct clk *clk;
-+ int user;
-+ int irq;
-+};
++#include <linux/gpio.h>
++#include <linux/io.h>
++
++#include <asm/arch/board.h>
++#include <asm/arch/cpu.h>
+
-+struct ssc_device * __must_check ssc_request(unsigned int ssc_num);
-+void ssc_free(struct ssc_device *ssc);
-+
-+/* SSC register offsets */
-+
-+/* SSC Control Register */
-+#define SSC_CR 0x00000000
-+#define SSC_CR_RXDIS_SIZE 1
-+#define SSC_CR_RXDIS_OFFSET 1
-+#define SSC_CR_RXEN_SIZE 1
-+#define SSC_CR_RXEN_OFFSET 0
-+#define SSC_CR_SWRST_SIZE 1
-+#define SSC_CR_SWRST_OFFSET 15
-+#define SSC_CR_TXDIS_SIZE 1
-+#define SSC_CR_TXDIS_OFFSET 9
-+#define SSC_CR_TXEN_SIZE 1
-+#define SSC_CR_TXEN_OFFSET 8
-+
-+/* SSC Clock Mode Register */
-+#define SSC_CMR 0x00000004
-+#define SSC_CMR_DIV_SIZE 12
-+#define SSC_CMR_DIV_OFFSET 0
-+
-+/* SSC Receive Clock Mode Register */
-+#define SSC_RCMR 0x00000010
-+#define SSC_RCMR_CKG_SIZE 2
-+#define SSC_RCMR_CKG_OFFSET 6
-+#define SSC_RCMR_CKI_SIZE 1
-+#define SSC_RCMR_CKI_OFFSET 5
-+#define SSC_RCMR_CKO_SIZE 3
-+#define SSC_RCMR_CKO_OFFSET 2
-+#define SSC_RCMR_CKS_SIZE 2
-+#define SSC_RCMR_CKS_OFFSET 0
-+#define SSC_RCMR_PERIOD_SIZE 8
-+#define SSC_RCMR_PERIOD_OFFSET 24
-+#define SSC_RCMR_START_SIZE 4
-+#define SSC_RCMR_START_OFFSET 8
-+#define SSC_RCMR_STOP_SIZE 1
-+#define SSC_RCMR_STOP_OFFSET 12
-+#define SSC_RCMR_STTDLY_SIZE 8
-+#define SSC_RCMR_STTDLY_OFFSET 16
-+
-+/* SSC Receive Frame Mode Register */
-+#define SSC_RFMR 0x00000014
-+#define SSC_RFMR_DATLEN_SIZE 5
-+#define SSC_RFMR_DATLEN_OFFSET 0
-+#define SSC_RFMR_DATNB_SIZE 4
-+#define SSC_RFMR_DATNB_OFFSET 8
-+#define SSC_RFMR_FSEDGE_SIZE 1
-+#define SSC_RFMR_FSEDGE_OFFSET 24
-+#define SSC_RFMR_FSLEN_SIZE 4
-+#define SSC_RFMR_FSLEN_OFFSET 16
-+#define SSC_RFMR_FSOS_SIZE 4
-+#define SSC_RFMR_FSOS_OFFSET 20
-+#define SSC_RFMR_LOOP_SIZE 1
-+#define SSC_RFMR_LOOP_OFFSET 5
-+#define SSC_RFMR_MSBF_SIZE 1
-+#define SSC_RFMR_MSBF_OFFSET 7
-+
-+/* SSC Transmit Clock Mode Register */
-+#define SSC_TCMR 0x00000018
-+#define SSC_TCMR_CKG_SIZE 2
-+#define SSC_TCMR_CKG_OFFSET 6
-+#define SSC_TCMR_CKI_SIZE 1
-+#define SSC_TCMR_CKI_OFFSET 5
-+#define SSC_TCMR_CKO_SIZE 3
-+#define SSC_TCMR_CKO_OFFSET 2
-+#define SSC_TCMR_CKS_SIZE 2
-+#define SSC_TCMR_CKS_OFFSET 0
-+#define SSC_TCMR_PERIOD_SIZE 8
-+#define SSC_TCMR_PERIOD_OFFSET 24
-+#define SSC_TCMR_START_SIZE 4
-+#define SSC_TCMR_START_OFFSET 8
-+#define SSC_TCMR_STTDLY_SIZE 8
-+#define SSC_TCMR_STTDLY_OFFSET 16
-+
-+/* SSC Transmit Frame Mode Register */
-+#define SSC_TFMR 0x0000001c
-+#define SSC_TFMR_DATDEF_SIZE 1
-+#define SSC_TFMR_DATDEF_OFFSET 5
-+#define SSC_TFMR_DATLEN_SIZE 5
-+#define SSC_TFMR_DATLEN_OFFSET 0
-+#define SSC_TFMR_DATNB_SIZE 4
-+#define SSC_TFMR_DATNB_OFFSET 8
-+#define SSC_TFMR_FSDEN_SIZE 1
-+#define SSC_TFMR_FSDEN_OFFSET 23
-+#define SSC_TFMR_FSEDGE_SIZE 1
-+#define SSC_TFMR_FSEDGE_OFFSET 24
-+#define SSC_TFMR_FSLEN_SIZE 4
-+#define SSC_TFMR_FSLEN_OFFSET 16
-+#define SSC_TFMR_FSOS_SIZE 3
-+#define SSC_TFMR_FSOS_OFFSET 20
-+#define SSC_TFMR_MSBF_SIZE 1
-+#define SSC_TFMR_MSBF_OFFSET 7
-+
-+/* SSC Receive Hold Register */
-+#define SSC_RHR 0x00000020
-+#define SSC_RHR_RDAT_SIZE 32
-+#define SSC_RHR_RDAT_OFFSET 0
-+
-+/* SSC Transmit Hold Register */
-+#define SSC_THR 0x00000024
-+#define SSC_THR_TDAT_SIZE 32
-+#define SSC_THR_TDAT_OFFSET 0
-+
-+/* SSC Receive Sync. Holding Register */
-+#define SSC_RSHR 0x00000030
-+#define SSC_RSHR_RSDAT_SIZE 16
-+#define SSC_RSHR_RSDAT_OFFSET 0
-+
-+/* SSC Transmit Sync. Holding Register */
-+#define SSC_TSHR 0x00000034
-+#define SSC_TSHR_TSDAT_SIZE 16
-+#define SSC_TSHR_RSDAT_OFFSET 0
-+
-+/* SSC Receive Compare 0 Register */
-+#define SSC_RC0R 0x00000038
-+#define SSC_RC0R_CP0_SIZE 16
-+#define SSC_RC0R_CP0_OFFSET 0
-+
-+/* SSC Receive Compare 1 Register */
-+#define SSC_RC1R 0x0000003c
-+#define SSC_RC1R_CP1_SIZE 16
-+#define SSC_RC1R_CP1_OFFSET 0
-+
-+/* SSC Status Register */
-+#define SSC_SR 0x00000040
-+#define SSC_SR_CP0_SIZE 1
-+#define SSC_SR_CP0_OFFSET 8
-+#define SSC_SR_CP1_SIZE 1
-+#define SSC_SR_CP1_OFFSET 9
-+#define SSC_SR_ENDRX_SIZE 1
-+#define SSC_SR_ENDRX_OFFSET 6
-+#define SSC_SR_ENDTX_SIZE 1
-+#define SSC_SR_ENDTX_OFFSET 2
-+#define SSC_SR_OVRUN_SIZE 1
-+#define SSC_SR_OVRUN_OFFSET 5
-+#define SSC_SR_RXBUFF_SIZE 1
-+#define SSC_SR_RXBUFF_OFFSET 7
-+#define SSC_SR_RXEN_SIZE 1
-+#define SSC_SR_RXEN_OFFSET 17
-+#define SSC_SR_RXRDY_SIZE 1
-+#define SSC_SR_RXRDY_OFFSET 4
-+#define SSC_SR_RXSYN_SIZE 1
-+#define SSC_SR_RXSYN_OFFSET 11
-+#define SSC_SR_TXBUFE_SIZE 1
-+#define SSC_SR_TXBUFE_OFFSET 3
-+#define SSC_SR_TXEMPTY_SIZE 1
-+#define SSC_SR_TXEMPTY_OFFSET 1
-+#define SSC_SR_TXEN_SIZE 1
-+#define SSC_SR_TXEN_OFFSET 16
-+#define SSC_SR_TXRDY_SIZE 1
-+#define SSC_SR_TXRDY_OFFSET 0
-+#define SSC_SR_TXSYN_SIZE 1
-+#define SSC_SR_TXSYN_OFFSET 10
-+
-+/* SSC Interrupt Enable Register */
-+#define SSC_IER 0x00000044
-+#define SSC_IER_CP0_SIZE 1
-+#define SSC_IER_CP0_OFFSET 8
-+#define SSC_IER_CP1_SIZE 1
-+#define SSC_IER_CP1_OFFSET 9
-+#define SSC_IER_ENDRX_SIZE 1
-+#define SSC_IER_ENDRX_OFFSET 6
-+#define SSC_IER_ENDTX_SIZE 1
-+#define SSC_IER_ENDTX_OFFSET 2
-+#define SSC_IER_OVRUN_SIZE 1
-+#define SSC_IER_OVRUN_OFFSET 5
-+#define SSC_IER_RXBUFF_SIZE 1
-+#define SSC_IER_RXBUFF_OFFSET 7
-+#define SSC_IER_RXRDY_SIZE 1
-+#define SSC_IER_RXRDY_OFFSET 4
-+#define SSC_IER_RXSYN_SIZE 1
-+#define SSC_IER_RXSYN_OFFSET 11
-+#define SSC_IER_TXBUFE_SIZE 1
-+#define SSC_IER_TXBUFE_OFFSET 3
-+#define SSC_IER_TXEMPTY_SIZE 1
-+#define SSC_IER_TXEMPTY_OFFSET 1
-+#define SSC_IER_TXRDY_SIZE 1
-+#define SSC_IER_TXRDY_OFFSET 0
-+#define SSC_IER_TXSYN_SIZE 1
-+#define SSC_IER_TXSYN_OFFSET 10
-+
-+/* SSC Interrupt Disable Register */
-+#define SSC_IDR 0x00000048
-+#define SSC_IDR_CP0_SIZE 1
-+#define SSC_IDR_CP0_OFFSET 8
-+#define SSC_IDR_CP1_SIZE 1
-+#define SSC_IDR_CP1_OFFSET 9
-+#define SSC_IDR_ENDRX_SIZE 1
-+#define SSC_IDR_ENDRX_OFFSET 6
-+#define SSC_IDR_ENDTX_SIZE 1
-+#define SSC_IDR_ENDTX_OFFSET 2
-+#define SSC_IDR_OVRUN_SIZE 1
-+#define SSC_IDR_OVRUN_OFFSET 5
-+#define SSC_IDR_RXBUFF_SIZE 1
-+#define SSC_IDR_RXBUFF_OFFSET 7
-+#define SSC_IDR_RXRDY_SIZE 1
-+#define SSC_IDR_RXRDY_OFFSET 4
-+#define SSC_IDR_RXSYN_SIZE 1
-+#define SSC_IDR_RXSYN_OFFSET 11
-+#define SSC_IDR_TXBUFE_SIZE 1
-+#define SSC_IDR_TXBUFE_OFFSET 3
-+#define SSC_IDR_TXEMPTY_SIZE 1
-+#define SSC_IDR_TXEMPTY_OFFSET 1
-+#define SSC_IDR_TXRDY_SIZE 1
-+#define SSC_IDR_TXRDY_OFFSET 0
-+#define SSC_IDR_TXSYN_SIZE 1
-+#define SSC_IDR_TXSYN_OFFSET 10
-+
-+/* SSC Interrupt Mask Register */
-+#define SSC_IMR 0x0000004c
-+#define SSC_IMR_CP0_SIZE 1
-+#define SSC_IMR_CP0_OFFSET 8
-+#define SSC_IMR_CP1_SIZE 1
-+#define SSC_IMR_CP1_OFFSET 9
-+#define SSC_IMR_ENDRX_SIZE 1
-+#define SSC_IMR_ENDRX_OFFSET 6
-+#define SSC_IMR_ENDTX_SIZE 1
-+#define SSC_IMR_ENDTX_OFFSET 2
-+#define SSC_IMR_OVRUN_SIZE 1
-+#define SSC_IMR_OVRUN_OFFSET 5
-+#define SSC_IMR_RXBUFF_SIZE 1
-+#define SSC_IMR_RXBUFF_OFFSET 7
-+#define SSC_IMR_RXRDY_SIZE 1
-+#define SSC_IMR_RXRDY_OFFSET 4
-+#define SSC_IMR_RXSYN_SIZE 1
-+#define SSC_IMR_RXSYN_OFFSET 11
-+#define SSC_IMR_TXBUFE_SIZE 1
-+#define SSC_IMR_TXBUFE_OFFSET 3
-+#define SSC_IMR_TXEMPTY_SIZE 1
-+#define SSC_IMR_TXEMPTY_OFFSET 1
-+#define SSC_IMR_TXRDY_SIZE 1
-+#define SSC_IMR_TXRDY_OFFSET 0
-+#define SSC_IMR_TXSYN_SIZE 1
-+#define SSC_IMR_TXSYN_OFFSET 10
-+
-+/* SSC PDC Receive Pointer Register */
-+#define SSC_PDC_RPR 0x00000100
-+
-+/* SSC PDC Receive Counter Register */
-+#define SSC_PDC_RCR 0x00000104
-+
-+/* SSC PDC Transmit Pointer Register */
-+#define SSC_PDC_TPR 0x00000108
-+
-+/* SSC PDC Receive Next Pointer Register */
-+#define SSC_PDC_RNPR 0x00000110
-+
-+/* SSC PDC Receive Next Counter Register */
-+#define SSC_PDC_RNCR 0x00000114
-+
-+/* SSC PDC Transmit Counter Register */
-+#define SSC_PDC_TCR 0x0000010c
-+
-+/* SSC PDC Transmit Next Pointer Register */
-+#define SSC_PDC_TNPR 0x00000118
-+
-+/* SSC PDC Transmit Next Counter Register */
-+#define SSC_PDC_TNCR 0x0000011c
-+
-+/* SSC PDC Transfer Control Register */
-+#define SSC_PDC_PTCR 0x00000120
-+#define SSC_PDC_PTCR_RXTDIS_SIZE 1
-+#define SSC_PDC_PTCR_RXTDIS_OFFSET 1
-+#define SSC_PDC_PTCR_RXTEN_SIZE 1
-+#define SSC_PDC_PTCR_RXTEN_OFFSET 0
-+#define SSC_PDC_PTCR_TXTDIS_SIZE 1
-+#define SSC_PDC_PTCR_TXTDIS_OFFSET 9
-+#define SSC_PDC_PTCR_TXTEN_SIZE 1
-+#define SSC_PDC_PTCR_TXTEN_OFFSET 8
-+
-+/* SSC PDC Transfer Status Register */
-+#define SSC_PDC_PTSR 0x00000124
-+#define SSC_PDC_PTSR_RXTEN_SIZE 1
-+#define SSC_PDC_PTSR_RXTEN_OFFSET 0
-+#define SSC_PDC_PTSR_TXTEN_SIZE 1
-+#define SSC_PDC_PTSR_TXTEN_OFFSET 8
++#ifdef CONFIG_MTD_NAND_ATMEL_ECC_HW
++#define hard_ecc 1
++#else
++#define hard_ecc 0
++#endif
+
-+/* Bit manipulation macros */
-+#define SSC_BIT(name) \
-+ (1 << SSC_##name##_OFFSET)
-+#define SSC_BF(name, value) \
-+ (((value) & ((1 << SSC_##name##_SIZE) - 1)) \
-+ << SSC_##name##_OFFSET)
-+#define SSC_BFEXT(name, value) \
-+ (((value) >> SSC_##name##_OFFSET) \
-+ & ((1 << SSC_##name##_SIZE) - 1))
-+#define SSC_BFINS(name, value, old) \
-+ (((old) & ~(((1 << SSC_##name##_SIZE) - 1) \
-+ << SSC_##name##_OFFSET)) | SSC_BF(name, value))
++#ifdef CONFIG_MTD_NAND_ATMEL_ECC_NONE
++#define no_ecc 1
++#else
++#define no_ecc 0
++#endif
+
+/* Register access macros */
-+#define ssc_readl(base, reg) __raw_readl(base + SSC_##reg)
-+#define ssc_writel(base, reg, value) __raw_writel((value), base + SSC_##reg)
-+
-+#endif /* __INCLUDE_ATMEL_SSC_H */
-diff --git a/include/linux/spi/at73c213.h b/include/linux/spi/at73c213.h
-new file mode 100644
-index 0000000..0f20a70
---- /dev/null
-+++ b/include/linux/spi/at73c213.h
-@@ -0,0 +1,25 @@
-+/*
-+ * Board-specific data used to set up AT73c213 audio DAC driver.
-+ */
++#define ecc_readl(add, reg) \
++ __raw_readl(add + ATMEL_ECC_##reg)
++#define ecc_writel(add, reg, value) \
++ __raw_writel((value), add + ATMEL_ECC_##reg)
+
-+#ifndef __LINUX_SPI_AT73C213_H
-+#define __LINUX_SPI_AT73C213_H
++#include "atmel_nand_ecc.h" /* Hardware ECC registers */
+
-+/**
-+ * at73c213_board_info - how the external DAC is wired to the device.
-+ *
-+ * @ssc_id: SSC platform_driver id the DAC shall use to stream the audio.
-+ * @dac_clk: the external clock used to provide master clock to the DAC.
-+ * @shortname: a short discription for the DAC, seen by userspace tools.
-+ *
-+ * This struct contains the configuration of the hardware connection to the
-+ * external DAC. The DAC needs a master clock and a I2S audio stream. It also
-+ * provides a name which is used to identify it in userspace tools.
++/* oob layout for large page size
++ * bad block info is on bytes 0 and 1
++ * the bytes have to be consecutives to avoid
++ * several NAND_CMD_RNDOUT during read
+ */
-+struct at73c213_board_info {
-+ int ssc_id;
-+ struct clk *dac_clk;
-+ char shortname[32];
++static struct nand_ecclayout atmel_oobinfo_large = {
++ .eccbytes = 4,
++ .eccpos = {60, 61, 62, 63},
++ .oobfree = {
++ {2, 58}
++ },
+};
+
-+#endif /* __LINUX_SPI_AT73C213_H */
-diff --git a/scripts/checkstack.pl b/scripts/checkstack.pl
-index f7844f6..6631586 100755
---- a/scripts/checkstack.pl
-+++ b/scripts/checkstack.pl
-@@ -12,6 +12,7 @@
- # sh64 port by Paul Mundt
- # Random bits by Matt Mackall <mpm@selenic.com>
- # M68k port by Geert Uytterhoeven and Andreas Schwab
-+# AVR32 port by Haavard Skinnemoen <hskinnemoen@atmel.com>
- #
- # Usage:
- # objdump -d vmlinux | stackcheck.pl [arch]
-@@ -37,6 +38,10 @@ my (@stack, $re, $x, $xs);
- if ($arch eq 'arm') {
- #c0008ffc: e24dd064 sub sp, sp, #100 ; 0x64
- $re = qr/.*sub.*sp, sp, #(([0-9]{2}|[3-9])[0-9]{2})/o;
-+ } elsif ($arch eq 'avr32') {
-+ #8000008a: 20 1d sub sp,4
-+ #80000ca8: fa cd 05 b0 sub sp,sp,1456
-+ $re = qr/^.*sub.*sp.*,([0-9]{1,8})/o;
- } elsif ($arch =~ /^i[3456]86$/) {
- #c0105234: 81 ec ac 05 00 00 sub $0x5ac,%esp
- $re = qr/^.*[as][du][db] \$(0x$x{1,8}),\%esp$/o;
-diff --git a/sound/Kconfig b/sound/Kconfig
-index e48b9b3..29a9979 100644
---- a/sound/Kconfig
-+++ b/sound/Kconfig
-@@ -63,6 +63,12 @@ source "sound/aoa/Kconfig"
-
- source "sound/arm/Kconfig"
-
-+source "sound/avr32/Kconfig"
-+
-+if SPI
-+source "sound/spi/Kconfig"
-+endif
-+
- source "sound/mips/Kconfig"
-
- source "sound/sh/Kconfig"
-diff --git a/sound/Makefile b/sound/Makefile
-index 3ead922..e655df7 100644
---- a/sound/Makefile
-+++ b/sound/Makefile
-@@ -5,7 +5,8 @@ obj-$(CONFIG_SOUND) += soundcore.o
- obj-$(CONFIG_SOUND_PRIME) += sound_firmware.o
- obj-$(CONFIG_SOUND_PRIME) += oss/
- obj-$(CONFIG_DMASOUND) += oss/
--obj-$(CONFIG_SND) += core/ i2c/ drivers/ isa/ pci/ ppc/ arm/ sh/ synth/ usb/ sparc/ parisc/ pcmcia/ mips/ soc/
-+obj-$(CONFIG_SND) += core/ i2c/ drivers/ isa/ pci/ ppc/ arm/ avr32/ sh/ synth/ usb/ sparc/ spi/ parisc/ pcmcia/ mips/ soc/
-+
- obj-$(CONFIG_SND_AOA) += aoa/
-
- # This one must be compilable even if sound is configured out
-diff --git a/sound/avr32/Kconfig b/sound/avr32/Kconfig
-new file mode 100644
-index 0000000..17d1d91
---- /dev/null
-+++ b/sound/avr32/Kconfig
-@@ -0,0 +1,11 @@
-+menu "AVR32 devices"
-+ depends on SND != n && AVR32
-+
-+config SND_ATMEL_AC97
-+ tristate "Atmel AC97 Controller Driver"
-+ select SND_PCM
-+ select SND_AC97_CODEC
-+ help
-+ ALSA sound driver for the Atmel AC97 controller.
++/* oob layout for small page size
++ * bad block info is on bytes 4 and 5
++ * the bytes have to be consecutives to avoid
++ * several NAND_CMD_RNDOUT during read
++ */
++static struct nand_ecclayout atmel_oobinfo_small = {
++ .eccbytes = 4,
++ .eccpos = {0, 1, 2, 3},
++ .oobfree = {
++ {6, 10}
++ },
++};
+
-+endmenu
-diff --git a/sound/avr32/Makefile b/sound/avr32/Makefile
-new file mode 100644
-index 0000000..5d87d0e
---- /dev/null
-+++ b/sound/avr32/Makefile
-@@ -0,0 +1,3 @@
-+snd-atmel-ac97-objs := ac97c.o
++struct atmel_nand_host {
++ struct nand_chip nand_chip;
++ struct mtd_info mtd;
++ void __iomem *io_base;
++ struct atmel_nand_data *board;
++ struct device *dev;
++ void __iomem *ecc;
++};
+
-+obj-$(CONFIG_SND_ATMEL_AC97) += snd-atmel-ac97.o
-diff --git a/sound/avr32/ac97c.c b/sound/avr32/ac97c.c
-new file mode 100644
-index 0000000..0ec0b1c
---- /dev/null
-+++ b/sound/avr32/ac97c.c
-@@ -0,0 +1,914 @@
+/*
-+ * Driver for the Atmel AC97 controller
-+ *
-+ * Copyright (C) 2005-2007 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published by
-+ * the Free Software Foundation.
++ * Enable NAND.
+ */
-+#include <linux/clk.h>
-+#include <linux/delay.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/mutex.h>
-+#include <linux/io.h>
-+
-+#include <sound/driver.h>
-+#include <sound/core.h>
-+#include <sound/initval.h>
-+#include <sound/pcm.h>
-+#include <sound/pcm_params.h>
-+#include <sound/ac97_codec.h>
-+#include <sound/memalloc.h>
-+
-+#include <asm/dma-controller.h>
-+
-+#include "ac97c.h"
-+
-+/* Serialize access to opened */
-+static DEFINE_MUTEX(opened_mutex);
++static void atmel_nand_enable(struct atmel_nand_host *host)
++{
++ if (host->board->enable_pin)
++ gpio_set_value(host->board->enable_pin, 0);
++}
+
-+struct atmel_ac97_dma_info {
-+ struct dma_request_cyclic req_tx;
-+ struct dma_request_cyclic req_rx;
-+ unsigned short rx_periph_id;
-+ unsigned short tx_periph_id;
-+};
++/*
++ * Disable NAND.
++ */
++static void atmel_nand_disable(struct atmel_nand_host *host)
++{
++ if (host->board->enable_pin)
++ gpio_set_value(host->board->enable_pin, 1);
++}
+
-+struct atmel_ac97 {
-+ /* Serialize access to opened */
-+ spinlock_t lock;
-+ void __iomem *regs;
-+ struct snd_pcm_substream *playback_substream;
-+ struct snd_pcm_substream *capture_substream;
-+ struct snd_card *card;
-+ struct snd_pcm *pcm;
-+ struct snd_ac97 *ac97;
-+ struct snd_ac97_bus *ac97_bus;
-+ int opened;
-+ int period;
-+ u64 cur_format;
-+ unsigned int cur_rate;
-+ struct clk *mck;
-+ struct platform_device *pdev;
-+ struct atmel_ac97_dma_info dma;
-+};
++/*
++ * Hardware specific access to control-lines
++ */
++static void atmel_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
++{
++ struct nand_chip *nand_chip = mtd->priv;
++ struct atmel_nand_host *host = nand_chip->priv;
+
-+#define get_chip(card) ((struct atmel_ac97 *)(card)->private_data)
++ if (ctrl & NAND_CTRL_CHANGE) {
++ if (ctrl & NAND_NCE)
++ atmel_nand_enable(host);
++ else
++ atmel_nand_disable(host);
++ }
++ if (cmd == NAND_CMD_NONE)
++ return;
+
-+#define ac97c_writel(chip, reg, val) \
-+ __raw_writel((val), (chip)->regs + AC97C_##reg)
-+#define ac97c_readl(chip, reg) \
-+ __raw_readl((chip)->regs + AC97C_##reg)
++ if (ctrl & NAND_CLE)
++ writeb(cmd, host->io_base + (1 << host->board->cle));
++ else
++ writeb(cmd, host->io_base + (1 << host->board->ale));
++}
+
+/*
-+ * PCM part
++ * Read the Device Ready pin.
+ */
-+static struct snd_pcm_hardware snd_atmel_ac97_playback_hw = {
-+ .info = (SNDRV_PCM_INFO_INTERLEAVED
-+ | SNDRV_PCM_INFO_MMAP
-+ | SNDRV_PCM_INFO_MMAP_VALID
-+ | SNDRV_PCM_INFO_BLOCK_TRANSFER
-+ | SNDRV_PCM_INFO_JOINT_DUPLEX),
-+ .formats = (SNDRV_PCM_FMTBIT_S16_BE
-+ | SNDRV_PCM_FMTBIT_S16_LE),
-+ .rates = (SNDRV_PCM_RATE_CONTINUOUS),
-+ .rate_min = 4000,
-+ .rate_max = 48000,
-+ .channels_min = 1,
-+ .channels_max = 6,
-+ .buffer_bytes_max = 64*1024,
-+ .period_bytes_min = 512,
-+ .period_bytes_max = 4095,
-+ .periods_min = 8,
-+ .periods_max = 1024,
-+};
++static int atmel_nand_device_ready(struct mtd_info *mtd)
++{
++ struct nand_chip *nand_chip = mtd->priv;
++ struct atmel_nand_host *host = nand_chip->priv;
+
-+static struct snd_pcm_hardware snd_atmel_ac97_capture_hw = {
-+ .info = (SNDRV_PCM_INFO_INTERLEAVED
-+ | SNDRV_PCM_INFO_MMAP
-+ | SNDRV_PCM_INFO_MMAP_VALID
-+ | SNDRV_PCM_INFO_BLOCK_TRANSFER
-+ | SNDRV_PCM_INFO_JOINT_DUPLEX),
-+ .formats = (SNDRV_PCM_FMTBIT_S16_BE
-+ | SNDRV_PCM_FMTBIT_S16_LE),
-+ .rates = (SNDRV_PCM_RATE_CONTINUOUS),
-+ .rate_min = 4000,
-+ .rate_max = 48000,
-+ .channels_min = 1,
-+ .channels_max = 2,
-+ .buffer_bytes_max = 64*1024,
-+ .period_bytes_min = 512,
-+ .period_bytes_max = 4095,
-+ .periods_min = 8,
-+ .periods_max = 1024,
-+};
++ return gpio_get_value(host->board->rdy_pin);
++}
+
+/*
-+ * PCM functions
++ * Minimal-overhead PIO for data access.
+ */
-+static int
-+snd_atmel_ac97_playback_open(struct snd_pcm_substream *substream)
++static void atmel_read_buf(struct mtd_info *mtd, u8 *buf, int len)
+{
-+ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
-+ struct snd_pcm_runtime *runtime = substream->runtime;
++ struct nand_chip *nand_chip = mtd->priv;
+
-+ mutex_lock(&opened_mutex);
-+ chip->opened++;
-+ runtime->hw = snd_atmel_ac97_playback_hw;
-+ if (chip->cur_rate) {
-+ runtime->hw.rate_min = chip->cur_rate;
-+ runtime->hw.rate_max = chip->cur_rate;
-+ }
-+ if (chip->cur_format)
-+ runtime->hw.formats = (1ULL << chip->cur_format);
-+ mutex_unlock(&opened_mutex);
-+ chip->playback_substream = substream;
-+ chip->period = 0;
-+ return 0;
++ __raw_readsb(nand_chip->IO_ADDR_R, buf, len);
+}
+
-+static int
-+snd_atmel_ac97_capture_open(struct snd_pcm_substream *substream)
++static void atmel_read_buf16(struct mtd_info *mtd, u8 *buf, int len)
+{
-+ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
-+ struct snd_pcm_runtime *runtime = substream->runtime;
++ struct nand_chip *nand_chip = mtd->priv;
+
-+ mutex_lock(&opened_mutex);
-+ chip->opened++;
-+ runtime->hw = snd_atmel_ac97_capture_hw;
-+ if (chip->cur_rate) {
-+ runtime->hw.rate_min = chip->cur_rate;
-+ runtime->hw.rate_max = chip->cur_rate;
-+ }
-+ if (chip->cur_format)
-+ runtime->hw.formats = (1ULL << chip->cur_format);
-+ mutex_unlock(&opened_mutex);
-+ chip->capture_substream = substream;
-+ chip->period = 0;
-+ return 0;
++ __raw_readsw(nand_chip->IO_ADDR_R, buf, len / 2);
+}
+
-+static int snd_atmel_ac97_playback_close(struct snd_pcm_substream *substream)
++static void atmel_write_buf(struct mtd_info *mtd, const u8 *buf, int len)
+{
-+ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
-+ mutex_lock(&opened_mutex);
-+ chip->opened--;
-+ if (!chip->opened) {
-+ chip->cur_rate = 0;
-+ chip->cur_format = 0;
-+ }
-+ mutex_unlock(&opened_mutex);
-+ return 0;
++ struct nand_chip *nand_chip = mtd->priv;
++
++ __raw_writesb(nand_chip->IO_ADDR_W, buf, len);
++}
++
++static void atmel_write_buf16(struct mtd_info *mtd, const u8 *buf, int len)
++{
++ struct nand_chip *nand_chip = mtd->priv;
++
++ __raw_writesw(nand_chip->IO_ADDR_W, buf, len / 2);
++}
++
++/*
++ * write oob for small pages
++ */
++static int atmel_nand_write_oob_512(struct mtd_info *mtd,
++ struct nand_chip *chip, int page)
++{
++ int chunk = chip->ecc.bytes + chip->ecc.prepad + chip->ecc.postpad;
++ int eccsize = chip->ecc.size, length = mtd->oobsize;
++ int len, pos, status = 0;
++ const uint8_t *bufpoi = chip->oob_poi;
++
++ pos = eccsize + chunk;
++
++ chip->cmdfunc(mtd, NAND_CMD_SEQIN, pos, page);
++ len = min_t(int, length, chunk);
++ chip->write_buf(mtd, bufpoi, len);
++ bufpoi += len;
++ length -= len;
++ if (length > 0)
++ chip->write_buf(mtd, bufpoi, length);
++
++ chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
++ status = chip->waitfunc(mtd, chip);
++
++ return status & NAND_STATUS_FAIL ? -EIO : 0;
++
+}
+
-+static int snd_atmel_ac97_capture_close(struct snd_pcm_substream *substream)
++/*
++ * read oob for small pages
++ */
++static int atmel_nand_read_oob_512(struct mtd_info *mtd,
++ struct nand_chip *chip, int page, int sndcmd)
+{
-+ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
-+ mutex_lock(&opened_mutex);
-+ chip->opened--;
-+ if (!chip->opened) {
-+ chip->cur_rate = 0;
-+ chip->cur_format = 0;
++ if (sndcmd) {
++ chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
++ sndcmd = 0;
+ }
-+ mutex_unlock(&opened_mutex);
-+ return 0;
++ chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
++ return sndcmd;
+}
+
-+static int
-+snd_atmel_ac97_playback_hw_params(struct snd_pcm_substream *substream,
-+ struct snd_pcm_hw_params *hw_params)
++/*
++ * Calculate HW ECC
++ *
++ * function called after a write
++ *
++ * mtd: MTD block structure
++ * dat: raw data (unused)
++ * ecc_code: buffer for ECC
++ */
++static int atmel_nand_calculate(struct mtd_info *mtd,
++ const u_char *dat, unsigned char *ecc_code)
+{
-+ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
-+ int err;
++ struct nand_chip *nand_chip = mtd->priv;
++ struct atmel_nand_host *host = nand_chip->priv;
++ uint32_t *eccpos = nand_chip->ecc.layout->eccpos;
++ unsigned int ecc_value;
+
-+ err = snd_pcm_lib_malloc_pages(substream,
-+ params_buffer_bytes(hw_params));
-+ if (err < 0)
-+ return err;
++ /* get the first 2 ECC bytes */
++ ecc_value = ecc_readl(host->ecc, PR);
+
-+ /* Set restrictions to params */
-+ mutex_lock(&opened_mutex);
-+ chip->cur_rate = params_rate(hw_params);
-+ chip->cur_format = params_format(hw_params);
-+ mutex_unlock(&opened_mutex);
++ ecc_code[eccpos[0]] = ecc_value & 0xFF;
++ ecc_code[eccpos[1]] = (ecc_value >> 8) & 0xFF;
++
++ /* get the last 2 ECC bytes */
++ ecc_value = ecc_readl(host->ecc, NPR) & ATMEL_ECC_NPARITY;
++
++ ecc_code[eccpos[2]] = ecc_value & 0xFF;
++ ecc_code[eccpos[3]] = (ecc_value >> 8) & 0xFF;
+
+ return 0;
+}
+
-+static int
-+snd_atmel_ac97_capture_hw_params(struct snd_pcm_substream *substream,
-+ struct snd_pcm_hw_params *hw_params)
++/*
++ * HW ECC read page function
++ *
++ * mtd: mtd info structure
++ * chip: nand chip info structure
++ * buf: buffer to store read data
++ */
++static int atmel_nand_read_page(struct mtd_info *mtd,
++ struct nand_chip *chip, uint8_t *buf)
+{
-+ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
-+ int err;
++ int eccsize = chip->ecc.size;
++ int eccbytes = chip->ecc.bytes;
++ uint32_t *eccpos = chip->ecc.layout->eccpos;
++ uint8_t *p = buf;
++ uint8_t *oob = chip->oob_poi;
++ uint8_t *ecc_pos;
++ int stat;
+
-+ err = snd_pcm_lib_malloc_pages(substream,
-+ params_buffer_bytes(hw_params));
-+ if (err < 0)
-+ return err;
++ /*
++ * Errata: ALE is incorrectly wired up to the ECC controller
++ * on the AP7000, so it will include the address cycles in the
++ * ECC calculation.
++ *
++ * Workaround: Reset the parity registers before reading the
++ * actual data.
++ */
++ if (cpu_is_at32ap7000()) {
++ struct atmel_nand_host *host = chip->priv;
++ ecc_writel(host->ecc, CR, ATMEL_ECC_RST);
++ }
+
-+ /* Set restrictions to params */
-+ mutex_lock(&opened_mutex);
-+ chip->cur_rate = params_rate(hw_params);
-+ chip->cur_format = params_format(hw_params);
-+ mutex_unlock(&opened_mutex);
++ /* read the page */
++ chip->read_buf(mtd, p, eccsize);
++
++ /* move to ECC position if needed */
++ if (eccpos[0] != 0) {
++ /* This only works on large pages
++ * because the ECC controller waits for
++ * NAND_CMD_RNDOUTSTART after the
++ * NAND_CMD_RNDOUT.
++ * anyway, for small pages, the eccpos[0] == 0
++ */
++ chip->cmdfunc(mtd, NAND_CMD_RNDOUT,
++ mtd->writesize + eccpos[0], -1);
++ }
++
++ /* the ECC controller needs to read the ECC just after the data */
++ ecc_pos = oob + eccpos[0];
++ chip->read_buf(mtd, ecc_pos, eccbytes);
++
++ /* check if there's an error */
++ stat = chip->ecc.correct(mtd, p, oob, NULL);
++
++ if (stat < 0)
++ mtd->ecc_stats.failed++;
++ else
++ mtd->ecc_stats.corrected += stat;
++
++ /* get back to oob start (end of page) */
++ chip->cmdfunc(mtd, NAND_CMD_RNDOUT, mtd->writesize, -1);
++
++ /* read the oob */
++ chip->read_buf(mtd, oob, mtd->oobsize);
+
+ return 0;
+}
+
-+static int snd_atmel_ac97_playback_hw_free(struct snd_pcm_substream *substream)
++/*
++ * HW ECC Correction
++ *
++ * function called after a read
++ *
++ * mtd: MTD block structure
++ * dat: raw data read from the chip
++ * read_ecc: ECC from the chip (unused)
++ * isnull: unused
++ *
++ * Detect and correct a 1 bit error for a page
++ */
++static int atmel_nand_correct(struct mtd_info *mtd, u_char *dat,
++ u_char *read_ecc, u_char *isnull)
+{
-+ return snd_pcm_lib_free_pages(substream);
++ struct nand_chip *nand_chip = mtd->priv;
++ struct atmel_nand_host *host = nand_chip->priv;
++ unsigned int ecc_status;
++ unsigned int ecc_word, ecc_bit;
++
++ /* get the status from the Status Register */
++ ecc_status = ecc_readl(host->ecc, SR);
++
++ /* if there's no error */
++ if (likely(!(ecc_status & ATMEL_ECC_RECERR)))
++ return 0;
++
++ /* get error bit offset (4 bits) */
++ ecc_bit = ecc_readl(host->ecc, PR) & ATMEL_ECC_BITADDR;
++ /* get word address (12 bits) */
++ ecc_word = ecc_readl(host->ecc, PR) & ATMEL_ECC_WORDADDR;
++ ecc_word >>= 4;
++
++ /* if there are multiple errors */
++ if (ecc_status & ATMEL_ECC_MULERR) {
++ /* check if it is a freshly erased block
++ * (filled with 0xff) */
++ if ((ecc_bit == ATMEL_ECC_BITADDR)
++ && (ecc_word == (ATMEL_ECC_WORDADDR >> 4))) {
++ /* the block has just been erased, return OK */
++ return 0;
++ }
++ /* it doesn't seems to be a freshly
++ * erased block.
++ * We can't correct so many errors */
++ dev_dbg(host->dev, "atmel_nand : multiple errors detected."
++ " Unable to correct.\n");
++ return -EIO;
++ }
++
++ /* if there's a single bit error : we can correct it */
++ if (ecc_status & ATMEL_ECC_ECCERR) {
++ /* there's nothing much to do here.
++ * the bit error is on the ECC itself.
++ */
++ dev_dbg(host->dev, "atmel_nand : one bit error on ECC code."
++ " Nothing to correct\n");
++ return 0;
++ }
++
++ dev_dbg(host->dev, "atmel_nand : one bit error on data."
++ " (word offset in the page :"
++ " 0x%x bit offset : 0x%x)\n",
++ ecc_word, ecc_bit);
++ /* correct the error */
++ if (nand_chip->options & NAND_BUSWIDTH_16) {
++ /* 16 bits words */
++ ((unsigned short *) dat)[ecc_word] ^= (1 << ecc_bit);
++ } else {
++ /* 8 bits words */
++ dat[ecc_word] ^= (1 << ecc_bit);
++ }
++ dev_dbg(host->dev, "atmel_nand : error corrected\n");
++ return 1;
+}
+
-+static int snd_atmel_ac97_capture_hw_free(struct snd_pcm_substream *substream)
++/*
++ * Enable HW ECC : unused on most chips
++ */
++static void atmel_nand_hwctl(struct mtd_info *mtd, int mode)
+{
-+
-+ return snd_pcm_lib_free_pages(substream);
++ if (cpu_is_at32ap7000()) {
++ struct nand_chip *nand_chip = mtd->priv;
++ struct atmel_nand_host *host = nand_chip->priv;
++ ecc_writel(host->ecc, CR, ATMEL_ECC_RST);
++ }
+}
+
-+static int snd_atmel_ac97_playback_prepare(struct snd_pcm_substream *substream)
++#ifdef CONFIG_MTD_PARTITIONS
++static const char *part_probes[] = { "cmdlinepart", NULL };
++#endif
++
++/*
++ * Probe for the NAND device.
++ */
++static int __init atmel_nand_probe(struct platform_device *pdev)
+{
-+ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
-+ struct platform_device *pdev = chip->pdev;
-+ struct snd_pcm_runtime *runtime = substream->runtime;
-+ int block_size = frames_to_bytes(runtime, runtime->period_size);
-+ unsigned long word = 0;
-+ unsigned long buffer_size = 0;
++ struct atmel_nand_host *host;
++ struct mtd_info *mtd;
++ struct nand_chip *nand_chip;
++ struct resource *regs;
++ struct resource *mem;
++ int res;
+
-+ dma_sync_single_for_device(&pdev->dev, runtime->dma_addr,
-+ block_size * 2, DMA_TO_DEVICE);
++#ifdef CONFIG_MTD_PARTITIONS
++ struct mtd_partition *partitions = NULL;
++ int num_partitions = 0;
++#endif
+
-+ /* Assign slots to channels */
-+ switch (substream->runtime->channels) {
-+ case 1:
-+ word |= AC97C_CH_ASSIGN(PCM_LEFT, A);
-+ break;
-+ case 2:
-+ /* Assign Left and Right slot to Channel A */
-+ word |= AC97C_CH_ASSIGN(PCM_LEFT, A)
-+ | AC97C_CH_ASSIGN(PCM_RIGHT, A);
-+ break;
-+ default:
-+ /* TODO: support more than two channels */
-+ return -EINVAL;
-+ break;
++ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (!mem) {
++ printk(KERN_ERR "atmel_nand: can't get I/O resource mem\n");
++ return -ENXIO;
+ }
-+ ac97c_writel(chip, OCA, word);
+
-+ /* Configure sample format and size */
-+ word = AC97C_CMR_PDCEN | AC97C_CMR_SIZE_16;
++ /* Allocate memory for the device structure (and zero it) */
++ host = kzalloc(sizeof(struct atmel_nand_host), GFP_KERNEL);
++ if (!host) {
++ printk(KERN_ERR "atmel_nand: failed to allocate device structure.\n");
++ return -ENOMEM;
++ }
+
-+ switch (runtime->format) {
-+ case SNDRV_PCM_FORMAT_S16_LE:
-+ word |= AC97C_CMR_CEM_LITTLE;
-+ break;
-+ case SNDRV_PCM_FORMAT_S16_BE: /* fall through */
-+ default:
-+ word &= ~AC97C_CMR_CEM_LITTLE;
-+ break;
++ host->io_base = ioremap(mem->start, mem->end - mem->start + 1);
++ if (host->io_base == NULL) {
++ printk(KERN_ERR "atmel_nand: ioremap failed\n");
++ res = -EIO;
++ goto err_nand_ioremap;
+ }
+
-+ ac97c_writel(chip, CAMR, word);
++ mtd = &host->mtd;
++ nand_chip = &host->nand_chip;
++ host->board = pdev->dev.platform_data;
++ host->dev = &pdev->dev;
+
-+ /* Set variable rate if needed */
-+ if (runtime->rate != 48000) {
-+ word = ac97c_readl(chip, MR);
-+ word |= AC97C_MR_VRA;
-+ ac97c_writel(chip, MR, word);
++ nand_chip->priv = host; /* link the private data structures */
++ mtd->priv = nand_chip;
++ mtd->owner = THIS_MODULE;
++
++ /* Set address of NAND IO lines */
++ nand_chip->IO_ADDR_R = host->io_base;
++ nand_chip->IO_ADDR_W = host->io_base;
++ nand_chip->cmd_ctrl = atmel_nand_cmd_ctrl;
++
++ if (host->board->rdy_pin)
++ nand_chip->dev_ready = atmel_nand_device_ready;
++
++ regs = platform_get_resource(pdev, IORESOURCE_MEM, 1);
++ if (!regs && hard_ecc) {
++ printk(KERN_ERR "atmel_nand: can't get I/O resource "
++ "regs\nFalling back on software ECC\n");
++ }
++
++ nand_chip->ecc.mode = NAND_ECC_SOFT; /* enable ECC */
++ if (no_ecc)
++ nand_chip->ecc.mode = NAND_ECC_NONE;
++ if (hard_ecc && regs) {
++ host->ecc = ioremap(regs->start, regs->end - regs->start + 1);
++ if (host->ecc == NULL) {
++ printk(KERN_ERR "atmel_nand: ioremap failed\n");
++ res = -EIO;
++ goto err_ecc_ioremap;
++ }
++ nand_chip->ecc.mode = NAND_ECC_HW_SYNDROME;
++ nand_chip->ecc.calculate = atmel_nand_calculate;
++ nand_chip->ecc.correct = atmel_nand_correct;
++ nand_chip->ecc.hwctl = atmel_nand_hwctl;
++ nand_chip->ecc.read_page = atmel_nand_read_page;
++ nand_chip->ecc.bytes = 4;
++ nand_chip->ecc.prepad = 0;
++ nand_chip->ecc.postpad = 0;
++ }
++
++ nand_chip->chip_delay = 20; /* 20us command delay time */
++
++ if (host->board->bus_width_16) { /* 16-bit bus width */
++ nand_chip->options |= NAND_BUSWIDTH_16;
++ nand_chip->read_buf = atmel_read_buf16;
++ nand_chip->write_buf = atmel_write_buf16;
+ } else {
-+ /* Clear Variable Rate Bit */
-+ word = ac97c_readl(chip, MR);
-+ word &= ~AC97C_MR_VRA;
-+ ac97c_writel(chip, MR, word);
++ nand_chip->read_buf = atmel_read_buf;
++ nand_chip->write_buf = atmel_write_buf;
+ }
+
-+ /* Set rate */
-+ snd_ac97_set_rate(chip->ac97, AC97_PCM_FRONT_DAC_RATE, runtime->rate);
++ platform_set_drvdata(pdev, host);
++ atmel_nand_enable(host);
+
-+ buffer_size = frames_to_bytes(runtime, runtime->period_size) *
-+ runtime->periods;
++ if (host->board->det_pin) {
++ if (gpio_get_value(host->board->det_pin)) {
++ printk("No SmartMedia card inserted.\n");
++ res = ENXIO;
++ goto err_no_card;
++ }
++ }
+
-+ chip->dma.req_tx.buffer_size = buffer_size;
-+ chip->dma.req_tx.periods = runtime->periods;
++ /* first scan to find the device and get the page size */
++ if (nand_scan_ident(mtd, 1)) {
++ res = -ENXIO;
++ goto err_scan_ident;
++ }
+
-+ BUG_ON(chip->dma.req_tx.buffer_size !=
-+ (chip->dma.req_tx.periods *
-+ frames_to_bytes(runtime, runtime->period_size)));
++ if (nand_chip->ecc.mode == NAND_ECC_HW_SYNDROME) {
++ /* ECC is calculated for the whole page (1 step) */
++ nand_chip->ecc.size = mtd->writesize;
++
++ /* set ECC page size and oob layout */
++ switch (mtd->writesize) {
++ case 512:
++ nand_chip->ecc.layout = &atmel_oobinfo_small;
++ nand_chip->ecc.read_oob = atmel_nand_read_oob_512;
++ nand_chip->ecc.write_oob = atmel_nand_write_oob_512;
++ ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_528);
++ break;
++ case 1024:
++ nand_chip->ecc.layout = &atmel_oobinfo_large;
++ ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_1056);
++ break;
++ case 2048:
++ nand_chip->ecc.layout = &atmel_oobinfo_large;
++ ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_2112);
++ break;
++ case 4096:
++ nand_chip->ecc.layout = &atmel_oobinfo_large;
++ ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_4224);
++ break;
++ default:
++ /* page size not handled by HW ECC */
++ /* switching back to soft ECC */
++ nand_chip->ecc.mode = NAND_ECC_SOFT;
++ nand_chip->ecc.calculate = NULL;
++ nand_chip->ecc.correct = NULL;
++ nand_chip->ecc.hwctl = NULL;
++ nand_chip->ecc.read_page = NULL;
++ nand_chip->ecc.postpad = 0;
++ nand_chip->ecc.prepad = 0;
++ nand_chip->ecc.bytes = 0;
++ break;
++ }
++ }
+
-+ chip->dma.req_tx.buffer_start = runtime->dma_addr;
-+ chip->dma.req_tx.data_reg = (dma_addr_t)(chip->regs + AC97C_CATHR + 2);
-+ chip->dma.req_tx.periph_id = chip->dma.tx_periph_id;
-+ chip->dma.req_tx.direction = DMA_DIR_MEM_TO_PERIPH;
-+ chip->dma.req_tx.width = DMA_WIDTH_16BIT;
-+ chip->dma.req_tx.dev_id = chip;
++ /* second phase scan */
++ if (nand_scan_tail(mtd)) {
++ res = -ENXIO;
++ goto err_scan_tail;
++ }
++
++#ifdef CONFIG_MTD_PARTITIONS
++#ifdef CONFIG_MTD_CMDLINE_PARTS
++ mtd->name = "atmel_nand";
++ num_partitions = parse_mtd_partitions(mtd, part_probes,
++ &partitions, 0);
++#endif
++ if (num_partitions <= 0 && host->board->partition_info)
++ partitions = host->board->partition_info(mtd->size,
++ &num_partitions);
++
++ if ((!partitions) || (num_partitions == 0)) {
++ printk(KERN_ERR "atmel_nand: No parititions defined, or unsupported device.\n");
++ res = ENXIO;
++ goto err_no_partitions;
++ }
++
++ res = add_mtd_partitions(mtd, partitions, num_partitions);
++#else
++ res = add_mtd_device(mtd);
++#endif
++
++ if (!res)
++ return res;
++
++#ifdef CONFIG_MTD_PARTITIONS
++err_no_partitions:
++#endif
++ nand_release(mtd);
++err_scan_tail:
++err_scan_ident:
++err_no_card:
++ atmel_nand_disable(host);
++ platform_set_drvdata(pdev, NULL);
++ if (host->ecc)
++ iounmap(host->ecc);
++err_ecc_ioremap:
++ iounmap(host->io_base);
++err_nand_ioremap:
++ kfree(host);
++ return res;
++}
++
++/*
++ * Remove a NAND device.
++ */
++static int __exit atmel_nand_remove(struct platform_device *pdev)
++{
++ struct atmel_nand_host *host = platform_get_drvdata(pdev);
++ struct mtd_info *mtd = &host->mtd;
++
++ nand_release(mtd);
++
++ atmel_nand_disable(host);
++
++ if (host->ecc)
++ iounmap(host->ecc);
++ iounmap(host->io_base);
++ kfree(host);
+
+ return 0;
+}
+
-+static int snd_atmel_ac97_capture_prepare(struct snd_pcm_substream *substream)
++static struct platform_driver atmel_nand_driver = {
++ .remove = __exit_p(atmel_nand_remove),
++ .driver = {
++ .name = "atmel_nand",
++ .owner = THIS_MODULE,
++ },
++};
++
++static int __init atmel_nand_init(void)
+{
-+ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
-+ struct platform_device *pdev = chip->pdev;
-+ struct snd_pcm_runtime *runtime = substream->runtime;
-+ int block_size = frames_to_bytes(runtime, runtime->period_size);
-+ unsigned long word = 0;
-+ unsigned long buffer_size = 0;
++ return platform_driver_probe(&atmel_nand_driver, atmel_nand_probe);
++}
+
-+ dma_sync_single_for_device(&pdev->dev, runtime->dma_addr,
-+ block_size * 2, DMA_FROM_DEVICE);
+
-+ /* Assign slots to channels */
-+ switch (substream->runtime->channels) {
-+ case 1:
-+ word |= AC97C_CH_ASSIGN(PCM_LEFT, A);
-+ break;
-+ case 2:
-+ /* Assign Left and Right slot to Channel A */
-+ word |= AC97C_CH_ASSIGN(PCM_LEFT, A)
-+ | AC97C_CH_ASSIGN(PCM_RIGHT, A);
-+ break;
-+ default:
-+ /* TODO: support more than two channels */
-+ return -EINVAL;
-+ break;
-+ }
-+ ac97c_writel(chip, ICA, word);
++static void __exit atmel_nand_exit(void)
++{
++ platform_driver_unregister(&atmel_nand_driver);
++}
+
-+ /* Configure sample format and size */
-+ word = AC97C_CMR_PDCEN | AC97C_CMR_SIZE_16;
+
-+ switch (runtime->format) {
-+ case SNDRV_PCM_FORMAT_S16_LE:
-+ word |= AC97C_CMR_CEM_LITTLE;
-+ break;
-+ case SNDRV_PCM_FORMAT_S16_BE:
-+ default:
-+ word &= ~(AC97C_CMR_CEM_LITTLE);
-+ break;
-+ }
++module_init(atmel_nand_init);
++module_exit(atmel_nand_exit);
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Rick Bronson");
++MODULE_DESCRIPTION("NAND/SmartMedia driver for AT91 / AVR32");
++MODULE_ALIAS("platform:atmel_nand");
+--- /dev/null
++++ b/drivers/mtd/nand/atmel_nand_ecc.h
+@@ -0,0 +1,36 @@
++/*
++ * Error Corrected Code Controller (ECC) - System peripherals regsters.
++ * Based on AT91SAM9260 datasheet revision B.
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License as published by the
++ * Free Software Foundation; either version 2 of the License, or (at your
++ * option) any later version.
++ */
+
-+ ac97c_writel(chip, CAMR, word);
++#ifndef ATMEL_NAND_ECC_H
++#define ATMEL_NAND_ECC_H
+
-+ /* Set variable rate if needed */
-+ if (runtime->rate != 48000) {
-+ word = ac97c_readl(chip, MR);
-+ word |= AC97C_MR_VRA;
-+ ac97c_writel(chip, MR, word);
-+ } else {
-+ /* Clear Variable Rate Bit */
-+ word = ac97c_readl(chip, MR);
-+ word &= ~(AC97C_MR_VRA);
-+ ac97c_writel(chip, MR, word);
-+ }
++#define ATMEL_ECC_CR 0x00 /* Control register */
++#define ATMEL_ECC_RST (1 << 0) /* Reset parity */
+
-+ /* Set rate */
-+ snd_ac97_set_rate(chip->ac97, AC97_PCM_LR_ADC_RATE, runtime->rate);
++#define ATMEL_ECC_MR 0x04 /* Mode register */
++#define ATMEL_ECC_PAGESIZE (3 << 0) /* Page Size */
++#define ATMEL_ECC_PAGESIZE_528 (0)
++#define ATMEL_ECC_PAGESIZE_1056 (1)
++#define ATMEL_ECC_PAGESIZE_2112 (2)
++#define ATMEL_ECC_PAGESIZE_4224 (3)
+
-+ buffer_size = frames_to_bytes(runtime, runtime->period_size) *
-+ runtime->periods;
++#define ATMEL_ECC_SR 0x08 /* Status register */
++#define ATMEL_ECC_RECERR (1 << 0) /* Recoverable Error */
++#define ATMEL_ECC_ECCERR (1 << 1) /* ECC Single Bit Error */
++#define ATMEL_ECC_MULERR (1 << 2) /* Multiple Errors */
+
-+ chip->dma.req_rx.buffer_size = buffer_size;
-+ chip->dma.req_rx.periods = runtime->periods;
++#define ATMEL_ECC_PR 0x0c /* Parity register */
++#define ATMEL_ECC_BITADDR (0xf << 0) /* Bit Error Address */
++#define ATMEL_ECC_WORDADDR (0xfff << 4) /* Word Error Address */
+
-+ BUG_ON(chip->dma.req_rx.buffer_size !=
-+ (chip->dma.req_rx.periods *
-+ frames_to_bytes(runtime, runtime->period_size)));
++#define ATMEL_ECC_NPR 0x10 /* NParity register */
++#define ATMEL_ECC_NPARITY (0xffff << 0) /* NParity */
+
-+ chip->dma.req_rx.buffer_start = runtime->dma_addr;
-+ chip->dma.req_rx.data_reg = (dma_addr_t)(chip->regs + AC97C_CARHR + 2);
-+ chip->dma.req_rx.periph_id = chip->dma.rx_periph_id;
-+ chip->dma.req_rx.direction = DMA_DIR_PERIPH_TO_MEM;
-+ chip->dma.req_rx.width = DMA_WIDTH_16BIT;
-+ chip->dma.req_rx.dev_id = chip;
++#endif
+--- a/drivers/mtd/nand/bf5xx_nand.c
++++ b/drivers/mtd/nand/bf5xx_nand.c
+@@ -803,3 +803,4 @@ module_exit(bf5xx_nand_exit);
+ MODULE_LICENSE("GPL");
+ MODULE_AUTHOR(DRV_AUTHOR);
+ MODULE_DESCRIPTION(DRV_DESC);
++MODULE_ALIAS("platform:" DRV_NAME);
+--- a/drivers/mtd/nand/ndfc.c
++++ b/drivers/mtd/nand/ndfc.c
+@@ -317,3 +317,5 @@ module_exit(ndfc_nand_exit);
+ MODULE_LICENSE("GPL");
+ MODULE_AUTHOR("Thomas Gleixner <tglx@linutronix.de>");
+ MODULE_DESCRIPTION("Platform driver for NDFC");
++MODULE_ALIAS("platform:ndfc-chip");
++MODULE_ALIAS("platform:ndfc-nand");
+--- a/drivers/mtd/nand/orion_nand.c
++++ b/drivers/mtd/nand/orion_nand.c
+@@ -169,3 +169,4 @@ module_exit(orion_nand_exit);
+ MODULE_LICENSE("GPL");
+ MODULE_AUTHOR("Tzachi Perelstein");
+ MODULE_DESCRIPTION("NAND glue for Orion platforms");
++MODULE_ALIAS("platform:orion_nand");
+--- a/drivers/mtd/nand/plat_nand.c
++++ b/drivers/mtd/nand/plat_nand.c
+@@ -161,3 +161,4 @@ module_exit(plat_nand_exit);
+ MODULE_LICENSE("GPL");
+ MODULE_AUTHOR("Vitaly Wool");
+ MODULE_DESCRIPTION("Simple generic NAND driver");
++MODULE_ALIAS("platform:gen_nand");
+--- a/drivers/mtd/nand/s3c2410.c
++++ b/drivers/mtd/nand/s3c2410.c
+@@ -927,3 +927,6 @@ module_exit(s3c2410_nand_exit);
+ MODULE_LICENSE("GPL");
+ MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
+ MODULE_DESCRIPTION("S3C24XX MTD NAND driver");
++MODULE_ALIAS("platform:s3c2410-nand");
++MODULE_ALIAS("platform:s3c2412-nand");
++MODULE_ALIAS("platform:s3c2440-nand");
+--- a/drivers/net/macb.c
++++ b/drivers/net/macb.c
+@@ -1277,8 +1277,45 @@ static int __exit macb_remove(struct pla
+ return 0;
+ }
+
++#ifdef CONFIG_PM
++static int macb_suspend(struct platform_device *pdev, pm_message_t state)
++{
++ struct net_device *netdev = platform_get_drvdata(pdev);
++ struct macb *bp = netdev_priv(netdev);
++
++ netif_device_detach(netdev);
++
++#ifndef CONFIG_ARCH_AT91
++ clk_disable(bp->hclk);
++#endif
++ clk_disable(bp->pclk);
+
+ return 0;
+}
+
-+ static int
-+snd_atmel_ac97_playback_trigger(struct snd_pcm_substream *substream, int cmd)
++static int macb_resume(struct platform_device *pdev)
+{
-+ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
-+ unsigned long camr;
-+ int flags, err = 0;
-+
-+ spin_lock_irqsave(&chip->lock, flags);
-+ camr = ac97c_readl(chip, CAMR);
++ struct net_device *netdev = platform_get_drvdata(pdev);
++ struct macb *bp = netdev_priv(netdev);
+
-+ switch (cmd) {
-+ case SNDRV_PCM_TRIGGER_START:
-+ err = dma_prepare_request_cyclic(chip->dma.req_tx.req.dmac,
-+ &chip->dma.req_tx);
-+ dma_start_request(chip->dma.req_tx.req.dmac,
-+ chip->dma.req_tx.req.channel);
-+ camr |= AC97C_CMR_CENA;
-+ break;
-+ case SNDRV_PCM_TRIGGER_STOP:
-+ err = dma_stop_request(chip->dma.req_tx.req.dmac,
-+ chip->dma.req_tx.req.channel);
-+ if (chip->opened <= 1)
-+ camr &= ~AC97C_CMR_CENA;
-+ break;
-+ default:
-+ err = -EINVAL;
-+ break;
-+ }
++ clk_enable(bp->pclk);
++#ifndef CONFIG_ARCH_AT91
++ clk_enable(bp->hclk);
++#endif
+
-+ ac97c_writel(chip, CAMR, camr);
++ netif_device_attach(netdev);
+
-+ spin_unlock_irqrestore(&chip->lock, flags);
-+ return err;
++ return 0;
+}
++#else
++#define macb_suspend NULL
++#define macb_resume NULL
++#endif
+
-+ static int
-+snd_atmel_ac97_capture_trigger(struct snd_pcm_substream *substream, int cmd)
-+{
-+ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
-+ unsigned long camr;
-+ int flags, err = 0;
+ static struct platform_driver macb_driver = {
+ .remove = __exit_p(macb_remove),
++ .suspend = macb_suspend,
++ .resume = macb_resume,
+ .driver = {
+ .name = "macb",
+ },
+--- a/drivers/parport/Kconfig
++++ b/drivers/parport/Kconfig
+@@ -36,7 +36,7 @@ if PARPORT
+ config PARPORT_PC
+ tristate "PC-style hardware"
+ depends on (!SPARC64 || PCI) && !SPARC32 && !M32R && !FRV && \
+- (!M68K || ISA) && !MN10300
++ (!M68K || ISA) && !MN10300 && !AVR32
+ ---help---
+ You should say Y here if you have a PC-style parallel port. All
+ IBM PC compatible computers and some Alphas have PC-style
+--- a/drivers/pcmcia/Kconfig
++++ b/drivers/pcmcia/Kconfig
+@@ -277,6 +277,13 @@ config ELECTRA_CF
+ Say Y here to support the CompactFlash controller on the
+ PA Semi Electra eval board.
+
++config AT32_CF
++ tristate "AT32AP CompactFlash Controller"
++ depends on PCMCIA && AVR32 && PLATFORM_AT32AP
++ help
++ Say Y here to support the CompactFlash controller on AT32 chips.
++ Or choose M to compile the driver as a module named "at32_cf".
+
-+ spin_lock_irqsave(&chip->lock, flags);
-+ camr = ac97c_readl(chip, CAMR);
+ config PCCARD_NONSTATIC
+ tristate
+
+--- a/drivers/pcmcia/Makefile
++++ b/drivers/pcmcia/Makefile
+@@ -38,6 +38,7 @@ obj-$(CONFIG_PCMCIA_VRC4173) += vrc417
+ obj-$(CONFIG_OMAP_CF) += omap_cf.o
+ obj-$(CONFIG_AT91_CF) += at91_cf.o
+ obj-$(CONFIG_ELECTRA_CF) += electra_cf.o
++obj-$(CONFIG_AT32_CF) += at32_cf.o
+
+ sa11xx_core-y += soc_common.o sa11xx_base.o
+ pxa2xx_core-y += soc_common.o pxa2xx_base.o
+--- /dev/null
++++ b/drivers/pcmcia/at32_cf.c
+@@ -0,0 +1,533 @@
++/*
++ * Driver for AVR32 Static Memory Controller: CompactFlash support
++ *
++ * Copyright (C) 2006 Atmel Norway
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of the
++ * License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful, but
++ * WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
++ * General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
++ * 02111-1307, USA.
++ *
++ * The full GNU General Public License is included in this
++ * distribution in the file called COPYING.
++ */
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/platform_device.h>
++#include <linux/init.h>
++#include <linux/device.h>
++#include <linux/delay.h>
++#include <linux/interrupt.h>
++#include <linux/err.h>
++#include <linux/clk.h>
++#include <linux/dma-mapping.h>
+
-+ switch (cmd) {
-+ case SNDRV_PCM_TRIGGER_START:
-+ err = dma_prepare_request_cyclic(chip->dma.req_rx.req.dmac,
-+ &chip->dma.req_rx);
-+ dma_start_request(chip->dma.req_rx.req.dmac,
-+ chip->dma.req_rx.req.channel);
-+ camr |= AC97C_CMR_CENA;
-+ break;
-+ case SNDRV_PCM_TRIGGER_STOP:
-+ err = dma_stop_request(chip->dma.req_rx.req.dmac,
-+ chip->dma.req_rx.req.channel);
-+ mutex_lock(&opened_mutex);
-+ if (chip->opened <= 1)
-+ camr &= ~AC97C_CMR_CENA;
-+ mutex_unlock(&opened_mutex);
-+ break;
-+ default:
-+ err = -EINVAL;
-+ break;
-+ }
++#include <pcmcia/ss.h>
+
-+ ac97c_writel(chip, CAMR, camr);
++#include <asm/gpio.h>
++#include <asm/io.h>
++#include <asm/arch/board.h>
+
-+ spin_unlock_irqrestore(&chip->lock, flags);
-+ return err;
-+}
++#include <asm/arch/smc.h>
+
-+ static snd_pcm_uframes_t
-+snd_atmel_ac97_playback_pointer(struct snd_pcm_substream *substream)
-+{
-+ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
-+ struct snd_pcm_runtime *runtime = substream->runtime;
-+ snd_pcm_uframes_t pos;
-+ unsigned long bytes;
++struct at32_cf_socket {
++ struct pcmcia_socket socket;
++ int detect_pin;
++ int reset_pin;
++ int vcc_pin;
++ int ready_pin;
++ struct resource res_attr;
++ struct resource res_mem;
++ struct resource res_io;
++ struct smc_config smc;
++ unsigned int irq;
++ unsigned int cf_cs;
++ socket_state_t state;
++ unsigned present:1;
++};
++#define to_at32_cf(sock) container_of(sock, struct at32_cf_socket, socket)
+
-+ bytes = (dma_get_current_pos
-+ (chip->dma.req_tx.req.dmac,
-+ chip->dma.req_tx.req.channel) - runtime->dma_addr);
-+ pos = bytes_to_frames(runtime, bytes);
-+ if (pos >= runtime->buffer_size)
-+ pos -= runtime->buffer_size;
++/*
++ * We have the following memory layout relative to the base address:
++ *
++ * Alt IDE Mode: 00e0 0000 -> 00ff ffff
++ * True IDE Mode: 00c0 0000 -> 00df ffff
++ * I/O memory: 0080 0000 -> 00bf ffff
++ * Common memory: 0040 0000 -> 007f ffff
++ * Attribute memory: 0000 0000 -> 003f ffff
++ */
++#define CF_ATTR_OFFSET 0x00000000
++#define CF_MEM_OFFSET 0x00400000
++#define CF_IO_OFFSET 0x00800000
++#define CF_RES_SIZE 4096
+
-+ return pos;
-+}
++#ifdef DEBUG
+
-+ static snd_pcm_uframes_t
-+snd_atmel_ac97_capture_pointer(struct snd_pcm_substream *substream)
++static int pc_debug;
++module_param(pc_debug, int, 0644);
++
++static void at32_cf_debug(struct at32_cf_socket *cf, const char *func,
++ int level, const char *fmt, ...)
+{
-+ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
-+ struct snd_pcm_runtime *runtime = substream->runtime;
-+ snd_pcm_uframes_t pos;
-+ unsigned long bytes;
++ va_list args;
+
-+ bytes = (dma_get_current_pos
-+ (chip->dma.req_rx.req.dmac,
-+ chip->dma.req_rx.req.channel)
-+ - runtime->dma_addr);
-+ pos = bytes_to_frames(runtime, bytes);
-+ if (pos >= runtime->buffer_size)
-+ pos -= runtime->buffer_size;
++ if (pc_debug > level) {
++ printk(KERN_DEBUG "at32_cf/%u: %s: ", cf->cf_cs, func);
++ va_start(args, fmt);
++ vprintk(fmt, args);
++ va_end(args);
++ }
++}
+
++#define debug(cf, lvl, fmt, arg...) \
++ at32_cf_debug(cf, __func__, lvl, fmt, ##arg)
+
-+ return pos;
++#else
++#define debug(cf, lvl, fmt, arg...) do { } while (0)
++#endif
++
++static inline int at32_cf_present(struct at32_cf_socket *cf)
++{
++ int present = 1;
++
++ /* If we don't have a detect pin, assume the card is present */
++ if (cf->detect_pin >= 0)
++ present = !gpio_get_value(cf->detect_pin);
++
++ return present;
+}
+
-+static struct snd_pcm_ops atmel_ac97_playback_ops = {
-+ .open = snd_atmel_ac97_playback_open,
-+ .close = snd_atmel_ac97_playback_close,
-+ .ioctl = snd_pcm_lib_ioctl,
-+ .hw_params = snd_atmel_ac97_playback_hw_params,
-+ .hw_free = snd_atmel_ac97_playback_hw_free,
-+ .prepare = snd_atmel_ac97_playback_prepare,
-+ .trigger = snd_atmel_ac97_playback_trigger,
-+ .pointer = snd_atmel_ac97_playback_pointer,
-+};
++static irqreturn_t at32_cf_irq(int irq, void *dev_id)
++{
++ struct at32_cf_socket *cf = dev_id;
++ unsigned int present;
+
-+static struct snd_pcm_ops atmel_ac97_capture_ops = {
-+ .open = snd_atmel_ac97_capture_open,
-+ .close = snd_atmel_ac97_capture_close,
-+ .ioctl = snd_pcm_lib_ioctl,
-+ .hw_params = snd_atmel_ac97_capture_hw_params,
-+ .hw_free = snd_atmel_ac97_capture_hw_free,
-+ .prepare = snd_atmel_ac97_capture_prepare,
-+ .trigger = snd_atmel_ac97_capture_trigger,
-+ .pointer = snd_atmel_ac97_capture_pointer,
-+};
++ present = at32_cf_present(cf);
++ if (present != cf->present) {
++ cf->present = present;
++ debug(cf, 3, "card %s\n", present ? "present" : "gone");
++ pcmcia_parse_events(&cf->socket, SS_DETECT);
++ }
+
-+static struct ac97_pcm atmel_ac97_pcm_defs[] __devinitdata = {
-+ /* Playback */
-+ {
-+ .exclusive = 1,
-+ .r = { {
-+ .slots = ((1 << AC97_SLOT_PCM_LEFT)
-+ | (1 << AC97_SLOT_PCM_RIGHT)
-+ | (1 << AC97_SLOT_PCM_CENTER)
-+ | (1 << AC97_SLOT_PCM_SLEFT)
-+ | (1 << AC97_SLOT_PCM_SRIGHT)
-+ | (1 << AC97_SLOT_LFE)),
-+ } }
-+ },
-+ /* PCM in */
-+ {
-+ .stream = 1,
-+ .exclusive = 1,
-+ .r = { {
-+ .slots = ((1 << AC97_SLOT_PCM_LEFT)
-+ | (1 << AC97_SLOT_PCM_RIGHT)),
-+ } }
-+ },
-+ /* Mic in */
-+ {
-+ .stream = 1,
-+ .exclusive = 1,
-+ .r = { {
-+ .slots = (1<<AC97_SLOT_MIC),
-+ } }
-+ },
-+};
++ return IRQ_HANDLED;
++}
+
-+static int __devinit snd_atmel_ac97_pcm_new(struct atmel_ac97 *chip)
++static int at32_cf_get_status(struct pcmcia_socket *sock, u_int *value)
+{
-+ struct snd_pcm *pcm;
-+ int err;
++ struct at32_cf_socket *cf;
++ u_int status = 0;
+
-+ err = snd_ac97_pcm_assign(chip->ac97_bus,
-+ ARRAY_SIZE(atmel_ac97_pcm_defs),
-+ atmel_ac97_pcm_defs);
-+ if (err)
-+ return err;
++ cf = container_of(sock, struct at32_cf_socket, socket);
+
-+ err = snd_pcm_new(chip->card, "Atmel-AC97", 0, 1, 1, &pcm);
-+ if (err)
-+ return err;
++ if (at32_cf_present(cf)) {
++ /* NOTE: gpio on AP7xxx is 3.3V */
++ status = SS_DETECT | SS_3VCARD;
++ if (cf->ready_pin < 0 || gpio_get_value(cf->ready_pin))
++ status |= SS_READY;
++ if (cf->vcc_pin < 0 || gpio_get_value(cf->vcc_pin))
++ status |= SS_POWERON;
++ }
++
++ *value = status;
++ return 0;
++}
++
++static int at32_cf_set_socket(struct pcmcia_socket *sock, socket_state_t *state)
++{
++ struct at32_cf_socket *cf = container_of(sock, struct at32_cf_socket, socket);
+
-+ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK,
-+ &atmel_ac97_playback_ops);
++ debug(cf, 2, "mask: %s%s%s%s%s%sflags: %s%s%s%s%s%sVcc %d Vpp %d irq %d\n",
++ (state->csc_mask==0)?"<NONE> ":"",
++ (state->csc_mask&SS_DETECT)?"DETECT ":"",
++ (state->csc_mask&SS_READY)?"READY ":"",
++ (state->csc_mask&SS_BATDEAD)?"BATDEAD ":"",
++ (state->csc_mask&SS_BATWARN)?"BATWARN ":"",
++ (state->csc_mask&SS_STSCHG)?"STSCHG ":"",
++ (state->flags==0)?"<NONE> ":"",
++ (state->flags&SS_PWR_AUTO)?"PWR_AUTO ":"",
++ (state->flags&SS_IOCARD)?"IOCARD ":"",
++ (state->flags&SS_RESET)?"RESET ":"",
++ (state->flags&SS_SPKR_ENA)?"SPKR_ENA ":"",
++ (state->flags&SS_OUTPUT_ENA)?"OUTPUT_ENA ":"",
++ state->Vcc, state->Vpp, state->io_irq);
+
-+ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE,
-+ &atmel_ac97_capture_ops);
++ /*
++ * TODO: Allow boards to override this in case they have level
++ * converters.
++ */
++ switch (state->Vcc) {
++ case 0:
++ if (cf->vcc_pin >= 0)
++ gpio_set_value(cf->vcc_pin, 0);
++ break;
++ case 33:
++ if (cf->vcc_pin >= 0)
++ gpio_set_value(cf->vcc_pin, 1);
++ break;
++ default:
++ return -EINVAL;
++ }
+
-+ snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV,
-+ &chip->pdev->dev,
-+ 128 * 1024, 128 * 1024);
++ if (cf->reset_pin >= 0)
++ gpio_set_value(cf->reset_pin, state->flags & SS_RESET);
+
-+ pcm->private_data = chip;
-+ pcm->info_flags = 0;
-+ strcpy(pcm->name, "Atmel-AC97");
-+ chip->pcm = pcm;
++ cf->state = *state;
+
+ return 0;
+}
+
-+/*
-+ * Mixer part.
-+ */
-+static int snd_atmel_ac97_mixer_new(struct atmel_ac97 *chip)
++static int at32_cf_socket_init(struct pcmcia_socket *sock)
+{
-+ int err;
-+ struct snd_ac97_template template;
-+
-+ memset(&template, 0, sizeof(template));
-+ template.private_data = chip;
-+ err = snd_ac97_mixer(chip->ac97_bus, &template, &chip->ac97);
++ debug(to_at32_cf(sock), 2, "called\n");
+
-+ return err;
++ return 0;
+}
+
-+static void atmel_ac97_error(struct dma_request *_req)
++static int at32_cf_suspend(struct pcmcia_socket *sock)
+{
-+ struct dma_request_cyclic *req = to_dma_request_cyclic(_req);
-+ struct atmel_ac97 *chip = req->dev_id;
++ debug(to_at32_cf(sock), 2, "called\n");
+
-+ dev_dbg(&chip->pdev->dev, "DMA Controller error, channel %d\n",
-+ req->req.channel);
++ at32_cf_set_socket(sock, &dead_socket);
++
++ return 0;
+}
+
-+static void atmel_ac97_block_complete(struct dma_request *_req)
++static int at32_cf_set_io_map(struct pcmcia_socket *sock,
++ struct pccard_io_map *map)
+{
-+ struct dma_request_cyclic *req = to_dma_request_cyclic(_req);
-+ struct atmel_ac97 *chip = req->dev_id;
-+ if (req->periph_id == chip->dma.tx_periph_id)
-+ snd_pcm_period_elapsed(chip->playback_substream);
++ struct at32_cf_socket *cf = container_of(sock, struct at32_cf_socket, socket);
++ int retval;
++
++ debug(cf, 2, "map %u speed %u start 0x%08x stop 0x%08x\n",
++ map->map, map->speed, map->start, map->stop);
++ debug(cf, 2, "flags: %s%s%s%s%s%s%s%s\n",
++ (map->flags == 0) ? "<NONE>":"",
++ (map->flags & MAP_ACTIVE) ? "ACTIVE " : "",
++ (map->flags & MAP_16BIT) ? "16BIT " : "",
++ (map->flags & MAP_AUTOSZ) ? "AUTOSZ " : "",
++ (map->flags & MAP_0WS) ? "0WS " : "",
++ (map->flags & MAP_WRPROT) ? "WRPROT " : "",
++ (map->flags & MAP_USE_WAIT) ? "USE_WAIT " : "",
++ (map->flags & MAP_PREFETCH) ? "PREFETCH " : "");
++
++ map->flags &= MAP_ACTIVE | MAP_16BIT | MAP_USE_WAIT;
++
++ if (map->flags & MAP_16BIT)
++ cf->smc.bus_width = 2;
+ else
-+ snd_pcm_period_elapsed(chip->capture_substream);
-+}
++ cf->smc.bus_width = 1;
+
-+/*
-+ * Codec part.
-+ */
-+static void snd_atmel_ac97_write(struct snd_ac97 *ac97, unsigned short reg,
-+ unsigned short val)
-+{
-+ struct atmel_ac97 *chip = get_chip(ac97);
-+ unsigned long word;
-+ int timeout = 40;
++ if (map->flags & MAP_USE_WAIT)
++ cf->smc.nwait_mode = 3;
++ else
++ cf->smc.nwait_mode = 0;
+
-+ word = (reg & 0x7f) << 16 | val;
++ retval = smc_set_configuration(cf->cf_cs, &cf->smc);
++ if (retval) {
++ printk(KERN_ERR "at32_cf: could not set up SMC for I/O\n");
++ return retval;
++ }
+
-+ do {
-+ if (ac97c_readl(chip, COSR) & AC97C_CSR_TXRDY) {
-+ ac97c_writel(chip, COTHR, word);
-+ return;
-+ }
-+ udelay(1);
-+ } while (--timeout);
++ map->start = cf->socket.io_offset;
++ map->stop = map->start + CF_RES_SIZE - 1;
+
-+ dev_dbg(&chip->pdev->dev, "codec write timeout\n");
++ return 0;
+}
+
-+static unsigned short snd_atmel_ac97_read(struct snd_ac97 *ac97,
-+ unsigned short reg)
++static int
++at32_cf_set_mem_map(struct pcmcia_socket *sock, struct pccard_mem_map *map)
+{
-+ struct atmel_ac97 *chip = get_chip(ac97);
-+ unsigned long word;
-+ int timeout = 40;
-+ int write = 10;
++ struct at32_cf_socket *cf;
++ struct resource *res;
++ int retval;
+
-+ word = (0x80 | (reg & 0x7f)) << 16;
++ cf = container_of(sock, struct at32_cf_socket, socket);
++
++ debug(cf, 2, "map %u speed %u card_start %08x\n",
++ map->map, map->speed, map->card_start);
++ debug(cf, 2, "flags: %s%s%s%s%s%s%s%s\n",
++ (map->flags==0)?"<NONE>":"",
++ (map->flags&MAP_ACTIVE)?"ACTIVE ":"",
++ (map->flags&MAP_16BIT)?"16BIT ":"",
++ (map->flags&MAP_AUTOSZ)?"AUTOSZ ":"",
++ (map->flags&MAP_0WS)?"0WS ":"",
++ (map->flags&MAP_WRPROT)?"WRPROT ":"",
++ (map->flags&MAP_ATTRIB)?"ATTRIB ":"",
++ (map->flags&MAP_USE_WAIT)?"USE_WAIT ":"");
++
++ if (map->card_start)
++ return -EINVAL;
+
-+ if ((ac97c_readl(chip, COSR) & AC97C_CSR_RXRDY) != 0)
-+ ac97c_readl(chip, CORHR);
++ map->flags &= MAP_ACTIVE | MAP_ATTRIB | MAP_16BIT | MAP_USE_WAIT;
+
-+retry_write:
-+ timeout = 40;
++ if (map->flags & MAP_ATTRIB) {
++ res = &cf->res_attr;
+
-+ do {
-+ if ((ac97c_readl(chip, COSR) & AC97C_CSR_TXRDY) != 0) {
-+ ac97c_writel(chip, COTHR, word);
-+ goto read_reg;
-+ }
-+ mdelay(10);
-+ } while (--timeout);
++ /* Linksys WCF12 seems to use WAIT when reading CIS */
++ map->flags |= MAP_USE_WAIT;
++ } else {
++ res = &cf->res_mem;
++ }
+
-+ if (!--write)
-+ goto timed_out;
-+ goto retry_write;
++ if (map->flags & MAP_USE_WAIT)
++ cf->smc.nwait_mode = 3;
++ else
++ cf->smc.nwait_mode = 0;
+
-+read_reg:
-+ do {
-+ if ((ac97c_readl(chip, COSR) & AC97C_CSR_RXRDY) != 0) {
-+ unsigned short val = ac97c_readl(chip, CORHR);
-+ return val;
-+ }
-+ mdelay(10);
-+ } while (--timeout);
++ retval = smc_set_configuration(cf->cf_cs, &cf->smc);
++ if (retval) {
++ printk(KERN_ERR "at32_cf: could not set up SMC for mem\n");
++ return retval;
++ }
+
-+ if (!--write)
-+ goto timed_out;
-+ goto retry_write;
++ map->static_start = res->start;
+
-+timed_out:
-+ dev_dbg(&chip->pdev->dev, "codec read timeout\n");
-+ return 0xffff;
++ return 0;
+}
+
-+static void snd_atmel_ac97_reset(struct atmel_ac97 *chip)
++static struct pccard_operations at32_cf_ops = {
++ .init = at32_cf_socket_init,
++ .suspend = at32_cf_suspend,
++ .get_status = at32_cf_get_status,
++ .set_socket = at32_cf_set_socket,
++ .set_io_map = at32_cf_set_io_map,
++ .set_mem_map = at32_cf_set_mem_map,
++};
++
++static int __init request_pin(struct platform_device *pdev,
++ unsigned int pin, const char *name)
+{
-+ ac97c_writel(chip, MR, AC97C_MR_WRST);
-+ mdelay(1);
-+ ac97c_writel(chip, MR, AC97C_MR_ENA);
++ if (gpio_request(pin, name)) {
++ dev_warn(&pdev->dev, "failed to request %s pin\n", name);
++ return -1;
++ }
++
++ return pin;
+}
+
-+static void snd_atmel_ac97_destroy(struct snd_card *card)
++static struct smc_timing at32_cf_timing __initdata = {
++ .ncs_read_setup = 30,
++ .nrd_setup = 100,
++ .ncs_write_setup = 30,
++ .nwe_setup = 100,
++
++ .ncs_read_pulse = 360,
++ .nrd_pulse = 290,
++ .ncs_write_pulse = 360,
++ .nwe_pulse = 290,
++
++ .read_cycle = 420,
++ .write_cycle = 420,
++};
++
++static int __init at32_cf_probe(struct platform_device *pdev)
+{
-+ struct atmel_ac97 *chip = get_chip(card);
++ struct at32_cf_socket *cf;
++ struct cf_platform_data *board = pdev->dev.platform_data;
++ struct resource *res_skt;
++ int irq;
++ int ret;
+
-+ if (chip->regs)
-+ iounmap(chip->regs);
++ dev_dbg(&pdev->dev, "probe");
+
-+ if (chip->mck) {
-+ clk_disable(chip->mck);
-+ clk_put(chip->mck);
-+ }
++ if (!board)
++ return -ENXIO;
+
-+ if (chip->dma.req_tx.req.dmac) {
-+ dma_release_channel(chip->dma.req_tx.req.dmac,
-+ chip->dma.req_tx.req.channel);
-+ }
-+ if (chip->dma.req_rx.req.dmac) {
-+ dma_release_channel(chip->dma.req_rx.req.dmac,
-+ chip->dma.req_rx.req.channel);
++ res_skt = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (!res_skt)
++ return -ENXIO;
++
++ irq = platform_get_irq(pdev, 0);
++ if (irq < 0)
++ return irq;
++
++ cf = kzalloc(sizeof(struct at32_cf_socket), GFP_KERNEL);
++ if (!cf)
++ return -ENOMEM;
++
++ cf->detect_pin = -1;
++ cf->reset_pin = -1;
++ cf->vcc_pin = -1;
++ cf->ready_pin = -1;
++ cf->cf_cs = board->cs;
++
++ if (board->detect_pin != GPIO_PIN_NONE)
++ cf->detect_pin = request_pin(pdev, board->detect_pin,
++ "cf_detect");
++ if (board->reset_pin != GPIO_PIN_NONE)
++ cf->reset_pin = request_pin(pdev, board->reset_pin,
++ "cf_reset");
++ if (board->vcc_pin != GPIO_PIN_NONE)
++ cf->vcc_pin = request_pin(pdev, board->vcc_pin,
++ "cf_vcc");
++ if (board->ready_pin != GPIO_PIN_NONE)
++ /* READY is also used for irq through EIM */
++ cf->ready_pin = board->ready_pin;
++
++ debug(cf, 2, "pins: detect=%d reset=%d vcc=%d\n",
++ cf->detect_pin, cf->reset_pin, cf->vcc_pin);
++
++ cf->socket.pci_irq = irq;
++ cf->socket.ops = &at32_cf_ops;
++ cf->socket.resource_ops = &pccard_static_ops;
++ cf->socket.dev.parent = &pdev->dev;
++ cf->socket.owner = THIS_MODULE;
++ cf->socket.features =
++ SS_CAP_MEM_ALIGN | SS_CAP_STATIC_MAP | SS_CAP_PCCARD;
++ cf->socket.map_size = CF_RES_SIZE;
++
++ cf->res_attr.start = res_skt->start + CF_ATTR_OFFSET;
++ cf->res_attr.end = cf->res_attr.start + CF_RES_SIZE - 1;
++ cf->res_attr.name = "attribute";
++ cf->res_attr.flags = IORESOURCE_MEM;
++ ret = request_resource(res_skt, &cf->res_attr);
++ if (ret)
++ goto err_request_res_attr;
++
++ cf->res_mem.start = res_skt->start + CF_MEM_OFFSET;
++ cf->res_mem.end = cf->res_mem.start + CF_RES_SIZE - 1;
++ cf->res_mem.name = "memory";
++ cf->res_mem.flags = IORESOURCE_MEM;
++ ret = request_resource(res_skt, &cf->res_mem);
++ if (ret)
++ goto err_request_res_mem;
++
++ cf->res_io.start = res_skt->start + CF_IO_OFFSET;
++ cf->res_io.end = cf->res_io.start + CF_RES_SIZE - 1;
++ cf->res_io.name = "io";
++ cf->res_io.flags = IORESOURCE_MEM;
++ ret = request_resource(res_skt, &cf->res_io);
++ if (ret)
++ goto err_request_res_io;
++
++ cf->socket.io_offset = cf->res_io.start;
++
++ if (cf->detect_pin >= 0) {
++ ret = request_irq(gpio_to_irq(cf->detect_pin), at32_cf_irq,
++ IRQF_SHARED, "cf_detect", cf);
++ if (ret) {
++ debug(cf, 1,
++ "failed to request cf_detect interrupt\n");
++ goto err_detect_irq;
++ }
+ }
-+}
+
-+static int __devinit snd_atmel_ac97_create(struct snd_card *card,
-+ struct platform_device *pdev)
-+{
-+ static struct snd_ac97_bus_ops ops = {
-+ .write = snd_atmel_ac97_write,
-+ .read = snd_atmel_ac97_read,
-+ };
-+ struct atmel_ac97 *chip = get_chip(card);
-+ struct resource *regs;
-+ struct clk *mck;
-+ int err;
++ cf->present = at32_cf_present(cf);
+
-+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!regs)
-+ return -ENXIO;
++ /* Setup SMC timings */
++ smc_set_timing(&cf->smc, &at32_cf_timing);
+
-+ mck = clk_get(&pdev->dev, "pclk");
-+ if (IS_ERR(mck))
-+ return PTR_ERR(mck);
-+ clk_enable(mck);
-+ chip->mck = mck;
++ cf->smc.bus_width = 2;
++ cf->smc.nrd_controlled = 1;
++ cf->smc.nwe_controlled = 1;
++ cf->smc.nwait_mode = 0;
++ cf->smc.byte_write = 0;
++ cf->smc.tdf_cycles = 8;
++ cf->smc.tdf_mode = 0;
+
-+ card->private_free = snd_atmel_ac97_destroy;
++ ret = smc_set_configuration(cf->cf_cs, &cf->smc);
++ if (ret) {
++ debug(cf, 1, "failed to configure SMC\n", ret);
++ goto err_smc;
++ }
+
-+ spin_lock_init(&chip->lock);
-+ chip->card = card;
-+ chip->pdev = pdev;
++ ret = pcmcia_register_socket(&cf->socket);
++ if (ret) {
++ debug(cf, 1, "failed to register socket: %d\n", ret);
++ goto err_register_socket;
++ }
+
-+ chip->regs = ioremap(regs->start, regs->end - regs->start + 1);
-+ if (!chip->regs)
-+ return -ENOMEM;
++ if (cf->reset_pin >= 0)
++ gpio_direction_output(cf->reset_pin, 0);
+
-+ snd_card_set_dev(card, &pdev->dev);
++ platform_set_drvdata(pdev, cf);
+
-+ err = snd_ac97_bus(card, 0, &ops, chip, &chip->ac97_bus);
++ dev_info(&pdev->dev, "Atmel SMC CF interface at 0x%08lx\n",
++ (unsigned long)res_skt->start);
+
-+ return err;
++ return 0;
++
++err_register_socket:
++err_smc:
++ if (cf->detect_pin >= 0)
++ free_irq(gpio_to_irq(cf->detect_pin), cf);
++err_detect_irq:
++ release_resource(&cf->res_io);
++err_request_res_io:
++ release_resource(&cf->res_mem);
++err_request_res_mem:
++ release_resource(&cf->res_attr);
++err_request_res_attr:
++ if (cf->vcc_pin >= 0)
++ gpio_free(cf->vcc_pin);
++ if (cf->reset_pin >= 0)
++ gpio_free(cf->reset_pin);
++ if (cf->detect_pin >= 0)
++ gpio_free(cf->detect_pin);
++ kfree(cf);
++
++ return ret;
+}
+
-+static int __devinit snd_atmel_ac97_probe(struct platform_device *pdev)
++static int __exit at32_cf_remove(struct platform_device *pdev)
+{
-+ static int dev;
-+ struct snd_card *card;
-+ struct atmel_ac97 *chip;
-+ int err;
-+ int ch;
++ struct at32_cf_socket *cf = platform_get_drvdata(pdev);
+
-+ mutex_init(&opened_mutex);
++ pcmcia_unregister_socket(&cf->socket);
++ if (cf->detect_pin >= 0) {
++ free_irq(gpio_to_irq(cf->detect_pin), cf);
++ gpio_free(cf->detect_pin);
++ }
++ if (cf->vcc_pin >= 0)
++ gpio_free(cf->vcc_pin);
++ if (cf->reset_pin >= 0)
++ gpio_free(cf->reset_pin);
++
++ release_resource(&cf->res_io);
++ release_resource(&cf->res_mem);
++ release_resource(&cf->res_attr);
++ kfree(cf);
++ platform_set_drvdata(pdev, NULL);
+
-+ err = -ENOMEM;
-+ card = snd_card_new(SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1,
-+ THIS_MODULE, sizeof(struct atmel_ac97));
-+ if (!card)
-+ goto out;
-+ chip = get_chip(card);
++ return 0;
++}
+
-+ err = snd_atmel_ac97_create(card, pdev);
-+ if (err)
-+ goto out_free_card;
++static struct platform_driver at32_cf_driver = {
++ .remove = __exit_p(at32_cf_remove),
++ .driver = {
++ .name = "at32_cf",
++ .owner = THIS_MODULE,
++ },
++};
+
-+ snd_atmel_ac97_reset(chip);
++static int __init at32_cf_init(void)
++{
++ int ret;
+
-+ err = snd_atmel_ac97_mixer_new(chip);
-+ if (err)
-+ goto out_free_card;
++ ret = platform_driver_probe(&at32_cf_driver, at32_cf_probe);
++ if (ret)
++ printk(KERN_ERR "at32_cf: probe failed: %d\n", ret);
++ return ret;
++}
+
-+ err = snd_atmel_ac97_pcm_new(chip);
-+ if (err)
-+ goto out_free_card;
++static void __exit at32_cf_exit(void)
++{
++ platform_driver_unregister(&at32_cf_driver);
++}
+
-+ /* TODO: Get this information from the platform device */
-+ chip->dma.req_tx.req.dmac = find_dma_controller(0);
-+ if (!chip->dma.req_tx.req.dmac) {
-+ dev_dbg(&chip->pdev->dev, "DMA controller for TX missing\n");
-+ err = -ENODEV;
-+ goto out_free_card;
-+ }
-+ chip->dma.req_rx.req.dmac = find_dma_controller(0);
-+ if (!chip->dma.req_rx.req.dmac) {
-+ dev_dbg(&chip->pdev->dev, "DMA controller for RX missing\n");
-+ err = -ENODEV;
-+ goto out_free_card;
++module_init(at32_cf_init);
++module_exit(at32_cf_exit);
++
++MODULE_LICENSE("GPL");
++MODULE_DESCRIPTION("Driver for SMC PCMCIA interface");
++MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
+--- a/drivers/rtc/rtc-at32ap700x.c
++++ b/drivers/rtc/rtc-at32ap700x.c
+@@ -262,6 +262,7 @@ static int __init at32_rtc_probe(struct
+ }
+
+ platform_set_drvdata(pdev, rtc);
++ device_init_wakeup(&pdev->dev, 1);
+
+ dev_info(&pdev->dev, "Atmel RTC for AT32AP700x at %08lx irq %ld\n",
+ (unsigned long)rtc->regs, rtc->irq);
+@@ -281,6 +282,8 @@ static int __exit at32_rtc_remove(struct
+ {
+ struct rtc_at32ap700x *rtc = platform_get_drvdata(pdev);
+
++ device_init_wakeup(&pdev->dev, 0);
++
+ free_irq(rtc->irq, rtc);
+ iounmap(rtc->regs);
+ rtc_device_unregister(rtc->rtc);
+--- a/drivers/serial/atmel_serial.c
++++ b/drivers/serial/atmel_serial.c
+@@ -957,6 +957,20 @@ static void atmel_shutdown(struct uart_p
+ }
+
+ /*
++ * Flush any TX data submitted for DMA. Called when the TX circular
++ * buffer is reset.
++ */
++static void atmel_flush_buffer(struct uart_port *port)
++{
++ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
++
++ if (atmel_use_dma_tx(port)) {
++ UART_PUT_TCR(port, 0);
++ atmel_port->pdc_tx.ofs = 0;
+ }
++}
+
-+ chip->dma.rx_periph_id = 3;
-+ chip->dma.tx_periph_id = 4;
++/*
+ * Power / Clock management.
+ */
+ static void atmel_serial_pm(struct uart_port *port, unsigned int state,
+@@ -1190,6 +1204,7 @@ static struct uart_ops atmel_pops = {
+ .break_ctl = atmel_break_ctl,
+ .startup = atmel_startup,
+ .shutdown = atmel_shutdown,
++ .flush_buffer = atmel_flush_buffer,
+ .set_termios = atmel_set_termios,
+ .type = atmel_type,
+ .release_port = atmel_release_port,
+@@ -1440,6 +1455,15 @@ static struct uart_driver atmel_uart = {
+ };
+
+ #ifdef CONFIG_PM
++static bool atmel_serial_clk_will_stop(void)
++{
++#ifdef CONFIG_ARCH_AT91
++ return at91_suspend_entering_slow_clock();
++#else
++ return false;
++#endif
++}
+
-+ ch = dma_alloc_channel(chip->dma.req_tx.req.dmac);
-+ if (ch < 0) {
-+ dev_dbg(&chip->pdev->dev,
-+ "could not allocate TX DMA channel\n");
-+ err = ch;
-+ goto out_free_card;
+ static int atmel_serial_suspend(struct platform_device *pdev,
+ pm_message_t state)
+ {
+@@ -1447,7 +1471,7 @@ static int atmel_serial_suspend(struct p
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+
+ if (device_may_wakeup(&pdev->dev)
+- && !at91_suspend_entering_slow_clock())
++ && !atmel_serial_clk_will_stop())
+ enable_irq_wake(port->irq);
+ else {
+ uart_suspend_port(&atmel_uart, port);
+--- a/drivers/serial/serial_core.c
++++ b/drivers/serial/serial_core.c
+@@ -552,6 +552,8 @@ static void uart_flush_buffer(struct tty
+
+ spin_lock_irqsave(&port->lock, flags);
+ uart_circ_clear(&state->info->xmit);
++ if (port->ops->flush_buffer)
++ port->ops->flush_buffer(port);
+ spin_unlock_irqrestore(&port->lock, flags);
+ tty_wakeup(tty);
+ }
+--- a/drivers/spi/atmel_spi.c
++++ b/drivers/spi/atmel_spi.c
+@@ -51,9 +51,7 @@ struct atmel_spi {
+ u8 stopping;
+ struct list_head queue;
+ struct spi_transfer *current_transfer;
+- unsigned long current_remaining_bytes;
+- struct spi_transfer *next_transfer;
+- unsigned long next_remaining_bytes;
++ unsigned long remaining_bytes;
+
+ void *buffer;
+ dma_addr_t buffer_dma;
+@@ -133,48 +131,6 @@ static void cs_deactivate(struct atmel_s
+ gpio_set_value(gpio, !active);
+ }
+
+-static inline int atmel_spi_xfer_is_last(struct spi_message *msg,
+- struct spi_transfer *xfer)
+-{
+- return msg->transfers.prev == &xfer->transfer_list;
+-}
+-
+-static inline int atmel_spi_xfer_can_be_chained(struct spi_transfer *xfer)
+-{
+- return xfer->delay_usecs == 0 && !xfer->cs_change;
+-}
+-
+-static void atmel_spi_next_xfer_data(struct spi_master *master,
+- struct spi_transfer *xfer,
+- dma_addr_t *tx_dma,
+- dma_addr_t *rx_dma,
+- u32 *plen)
+-{
+- struct atmel_spi *as = spi_master_get_devdata(master);
+- u32 len = *plen;
+-
+- /* use scratch buffer only when rx or tx data is unspecified */
+- if (xfer->rx_buf)
+- *rx_dma = xfer->rx_dma + xfer->len - len;
+- else {
+- *rx_dma = as->buffer_dma;
+- if (len > BUFFER_SIZE)
+- len = BUFFER_SIZE;
+- }
+- if (xfer->tx_buf)
+- *tx_dma = xfer->tx_dma + xfer->len - len;
+- else {
+- *tx_dma = as->buffer_dma;
+- if (len > BUFFER_SIZE)
+- len = BUFFER_SIZE;
+- memset(as->buffer, 0, len);
+- dma_sync_single_for_device(&as->pdev->dev,
+- as->buffer_dma, len, DMA_TO_DEVICE);
+- }
+-
+- *plen = len;
+-}
+-
+ /*
+ * Submit next transfer for DMA.
+ * lock is held, spi irq is blocked
+@@ -184,78 +140,53 @@ static void atmel_spi_next_xfer(struct s
+ {
+ struct atmel_spi *as = spi_master_get_devdata(master);
+ struct spi_transfer *xfer;
+- u32 len, remaining, total;
++ u32 len;
+ dma_addr_t tx_dma, rx_dma;
+
+- if (!as->current_transfer)
+- xfer = list_entry(msg->transfers.next,
+- struct spi_transfer, transfer_list);
+- else if (!as->next_transfer)
+- xfer = list_entry(as->current_transfer->transfer_list.next,
+- struct spi_transfer, transfer_list);
+- else
+- xfer = NULL;
+-
+- if (xfer) {
+- len = xfer->len;
+- atmel_spi_next_xfer_data(master, xfer, &tx_dma, &rx_dma, &len);
+- remaining = xfer->len - len;
+-
+- spi_writel(as, RPR, rx_dma);
+- spi_writel(as, TPR, tx_dma);
+-
+- if (msg->spi->bits_per_word > 8)
+- len >>= 1;
+- spi_writel(as, RCR, len);
+- spi_writel(as, TCR, len);
+-
+- dev_dbg(&msg->spi->dev,
+- " start xfer %p: len %u tx %p/%08x rx %p/%08x\n",
+- xfer, xfer->len, xfer->tx_buf, xfer->tx_dma,
+- xfer->rx_buf, xfer->rx_dma);
+- } else {
+- xfer = as->next_transfer;
+- remaining = as->next_remaining_bytes;
++ xfer = as->current_transfer;
++ if (!xfer || as->remaining_bytes == 0) {
++ if (xfer)
++ xfer = list_entry(xfer->transfer_list.next,
++ struct spi_transfer, transfer_list);
++ else
++ xfer = list_entry(msg->transfers.next,
++ struct spi_transfer, transfer_list);
++ as->remaining_bytes = xfer->len;
++ as->current_transfer = xfer;
+ }
+
+- as->current_transfer = xfer;
+- as->current_remaining_bytes = remaining;
+-
+- if (remaining > 0)
+- len = remaining;
+- else if (!atmel_spi_xfer_is_last(msg, xfer)
+- && atmel_spi_xfer_can_be_chained(xfer)) {
+- xfer = list_entry(xfer->transfer_list.next,
+- struct spi_transfer, transfer_list);
+- len = xfer->len;
+- } else
+- xfer = NULL;
++ len = as->remaining_bytes;
+
+- as->next_transfer = xfer;
++ tx_dma = xfer->tx_dma + xfer->len - len;
++ rx_dma = xfer->rx_dma + xfer->len - len;
+
+- if (xfer) {
+- total = len;
+- atmel_spi_next_xfer_data(master, xfer, &tx_dma, &rx_dma, &len);
+- as->next_remaining_bytes = total - len;
+-
+- spi_writel(as, RNPR, rx_dma);
+- spi_writel(as, TNPR, tx_dma);
+-
+- if (msg->spi->bits_per_word > 8)
+- len >>= 1;
+- spi_writel(as, RNCR, len);
+- spi_writel(as, TNCR, len);
+-
+- dev_dbg(&msg->spi->dev,
+- " next xfer %p: len %u tx %p/%08x rx %p/%08x\n",
+- xfer, xfer->len, xfer->tx_buf, xfer->tx_dma,
+- xfer->rx_buf, xfer->rx_dma);
+- } else {
+- spi_writel(as, RNCR, 0);
+- spi_writel(as, TNCR, 0);
++ /* use scratch buffer only when rx or tx data is unspecified */
++ if (!xfer->rx_buf) {
++ rx_dma = as->buffer_dma;
++ if (len > BUFFER_SIZE)
++ len = BUFFER_SIZE;
+ }
++ if (!xfer->tx_buf) {
++ tx_dma = as->buffer_dma;
++ if (len > BUFFER_SIZE)
++ len = BUFFER_SIZE;
++ memset(as->buffer, 0, len);
++ dma_sync_single_for_device(&as->pdev->dev,
++ as->buffer_dma, len, DMA_TO_DEVICE);
+ }
-+ chip->dma.req_tx.req.channel = ch;
-+ chip->dma.req_tx.width = DMA_WIDTH_16BIT;
-+ chip->dma.req_tx.req.block_complete = atmel_ac97_block_complete;
-+ chip->dma.req_tx.req.error = atmel_ac97_error;
+
-+ ch = dma_alloc_channel(chip->dma.req_rx.req.dmac);
-+ if (ch < 0) {
-+ dev_dbg(&chip->pdev->dev,
-+ "could not allocate RX DMA channel\n");
-+ err = ch;
-+ goto out_free_card;
-+ }
-+ chip->dma.req_rx.req.channel = ch;
-+ chip->dma.req_rx.width = DMA_WIDTH_16BIT;
-+ chip->dma.req_rx.req.block_complete = atmel_ac97_block_complete;
-+ chip->dma.req_rx.req.error = atmel_ac97_error;
++ spi_writel(as, RPR, rx_dma);
++ spi_writel(as, TPR, tx_dma);
+
+- /* REVISIT: We're waiting for ENDRX before we start the next
++ as->remaining_bytes -= len;
++ if (msg->spi->bits_per_word > 8)
++ len >>= 1;
++
++ /* REVISIT: when xfer->delay_usecs == 0, the PDC "next transfer"
++ * mechanism might help avoid the IRQ latency between transfers
++ * (and improve the nCS0 errata handling on at91rm9200 chips)
++ *
++ * We're also waiting for ENDRX before we start the next
+ * transfer because we need to handle some difficult timing
+ * issues otherwise. If we wait for ENDTX in one transfer and
+ * then starts waiting for ENDRX in the next, it's difficult
+@@ -265,7 +196,17 @@ static void atmel_spi_next_xfer(struct s
+ *
+ * It should be doable, though. Just not now...
+ */
++ spi_writel(as, TNCR, 0);
++ spi_writel(as, RNCR, 0);
+ spi_writel(as, IER, SPI_BIT(ENDRX) | SPI_BIT(OVRES));
++
++ dev_dbg(&msg->spi->dev,
++ " start xfer %p: len %u tx %p/%08x rx %p/%08x imr %03x\n",
++ xfer, xfer->len, xfer->tx_buf, xfer->tx_dma,
++ xfer->rx_buf, xfer->rx_dma, spi_readl(as, IMR));
++
++ spi_writel(as, RCR, len);
++ spi_writel(as, TCR, len);
+ spi_writel(as, PTCR, SPI_BIT(TXTEN) | SPI_BIT(RXTEN));
+ }
+
+@@ -363,7 +304,6 @@ atmel_spi_msg_done(struct spi_master *ma
+ spin_lock(&as->lock);
+
+ as->current_transfer = NULL;
+- as->next_transfer = NULL;
+
+ /* continue if needed */
+ if (list_empty(&as->queue) || as->stopping)
+@@ -447,7 +387,7 @@ atmel_spi_interrupt(int irq, void *dev_i
+
+ spi_writel(as, IDR, pending);
+
+- if (as->current_remaining_bytes == 0) {
++ if (as->remaining_bytes == 0) {
+ msg->actual_length += xfer->len;
+
+ if (!msg->is_dma_mapped)
+@@ -457,7 +397,7 @@ atmel_spi_interrupt(int irq, void *dev_i
+ if (xfer->delay_usecs)
+ udelay(xfer->delay_usecs);
+
+- if (atmel_spi_xfer_is_last(msg, xfer)) {
++ if (msg->transfers.prev == &xfer->transfer_list) {
+ /* report completed message */
+ atmel_spi_msg_done(master, as, msg, 0,
+ xfer->cs_change);
+--- a/drivers/usb/gadget/Kconfig
++++ b/drivers/usb/gadget/Kconfig
+@@ -118,10 +118,10 @@ config USB_AMD5536UDC
+ config USB_GADGET_ATMEL_USBA
+ boolean "Atmel USBA"
+ select USB_GADGET_DUALSPEED
+- depends on AVR32
++ depends on AVR32 || ARCH_AT91CAP9
+ help
+ USBA is the integrated high-speed USB Device controller on
+- the AT32AP700x processors from Atmel.
++ the AT32AP700x and AT91CAP9 processors from Atmel.
+
+ config USB_ATMEL_USBA
+ tristate
+--- a/drivers/usb/gadget/atmel_usba_udc.c
++++ b/drivers/usb/gadget/atmel_usba_udc.c
+@@ -18,6 +18,7 @@
+ #include <linux/platform_device.h>
+ #include <linux/usb/ch9.h>
+ #include <linux/usb/gadget.h>
++#include <linux/usb/atmel_usba_udc.h>
+ #include <linux/delay.h>
+
+ #include <asm/gpio.h>
+@@ -27,6 +28,7 @@
+
+
+ static struct usba_udc the_udc;
++static struct usba_ep *usba_ep;
+
+ #ifdef CONFIG_USB_GADGET_DEBUG_FS
+ #include <linux/debugfs.h>
+@@ -324,53 +326,28 @@ static int vbus_is_present(struct usba_u
+ return 1;
+ }
+
+-static void copy_to_fifo(void __iomem *fifo, const void *buf, int len)
+-{
+- unsigned long tmp;
++#if defined(CONFIG_AVR32)
+
+- DBG(DBG_FIFO, "copy to FIFO (len %d):\n", len);
+- for (; len > 0; len -= 4, buf += 4, fifo += 4) {
+- tmp = *(unsigned long *)buf;
+- if (len >= 4) {
+- DBG(DBG_FIFO, " -> %08lx\n", tmp);
+- __raw_writel(tmp, fifo);
+- } else {
+- do {
+- DBG(DBG_FIFO, " -> %02lx\n", tmp >> 24);
+- __raw_writeb(tmp >> 24, fifo);
+- fifo++;
+- tmp <<= 8;
+- } while (--len);
+- break;
+- }
+- }
++static void toggle_bias(int is_on)
++{
+ }
+
+-static void copy_from_fifo(void *buf, void __iomem *fifo, int len)
++#elif defined(CONFIG_ARCH_AT91)
+
-+ strcpy(card->driver, "atmel_ac97c");
-+ strcpy(card->shortname, "atmel_ac97c");
-+ sprintf(card->longname, "Atmel AVR32 AC97 controller");
++#include <asm/arch/at91_pmc.h>
+
-+ err = snd_card_register(card);
-+ if (err)
-+ goto out_free_card;
++static void toggle_bias(int is_on)
+ {
+- union {
+- unsigned long *w;
+- unsigned char *b;
+- } p;
+- unsigned long tmp;
+-
+- DBG(DBG_FIFO, "copy from FIFO (len %d):\n", len);
+- for (p.w = buf; len > 0; len -= 4, p.w++, fifo += 4) {
+- if (len >= 4) {
+- tmp = __raw_readl(fifo);
+- *p.w = tmp;
+- DBG(DBG_FIFO, " -> %08lx\n", tmp);
+- } else {
+- do {
+- tmp = __raw_readb(fifo);
+- *p.b = tmp;
+- DBG(DBG_FIFO, " -> %02lx\n", tmp);
+- fifo++, p.b++;
+- } while (--len);
+- }
+- }
++ unsigned int uckr = at91_sys_read(AT91_CKGR_UCKR);
+
-+ platform_set_drvdata(pdev, card);
-+ dev++;
++ if (is_on)
++ at91_sys_write(AT91_CKGR_UCKR, uckr | AT91_PMC_BIASEN);
++ else
++ at91_sys_write(AT91_CKGR_UCKR, uckr & ~(AT91_PMC_BIASEN));
+ }
+
++#endif /* CONFIG_ARCH_AT91 */
+
-+ dev_info(&pdev->dev, "Atmel AVR32 AC97 controller at 0x%p\n",
-+ chip->regs);
+ static void next_fifo_transaction(struct usba_ep *ep, struct usba_request *req)
+ {
+ unsigned int transaction_len;
+@@ -387,7 +364,7 @@ static void next_fifo_transaction(struct
+ ep->ep.name, req, transaction_len,
+ req->last_transaction ? ", done" : "");
+
+- copy_to_fifo(ep->fifo, req->req.buf + req->req.actual, transaction_len);
++ memcpy_toio(ep->fifo, req->req.buf + req->req.actual, transaction_len);
+ usba_ep_writel(ep, SET_STA, USBA_TX_PK_RDY);
+ req->req.actual += transaction_len;
+ }
+@@ -476,7 +453,7 @@ static void receive_data(struct usba_ep
+ bytecount = req->req.length - req->req.actual;
+ }
+
+- copy_from_fifo(req->req.buf + req->req.actual,
++ memcpy_fromio(req->req.buf + req->req.actual,
+ ep->fifo, bytecount);
+ req->req.actual += bytecount;
+
+@@ -1029,33 +1006,6 @@ static const struct usb_gadget_ops usba_
+ .set_selfpowered = usba_udc_set_selfpowered,
+ };
+
+-#define EP(nam, idx, maxpkt, maxbk, dma, isoc) \
+-{ \
+- .ep = { \
+- .ops = &usba_ep_ops, \
+- .name = nam, \
+- .maxpacket = maxpkt, \
+- }, \
+- .udc = &the_udc, \
+- .queue = LIST_HEAD_INIT(usba_ep[idx].queue), \
+- .fifo_size = maxpkt, \
+- .nr_banks = maxbk, \
+- .index = idx, \
+- .can_dma = dma, \
+- .can_isoc = isoc, \
+-}
+-
+-static struct usba_ep usba_ep[] = {
+- EP("ep0", 0, 64, 1, 0, 0),
+- EP("ep1in-bulk", 1, 512, 2, 1, 1),
+- EP("ep2out-bulk", 2, 512, 2, 1, 1),
+- EP("ep3in-int", 3, 64, 3, 1, 0),
+- EP("ep4out-int", 4, 64, 3, 1, 0),
+- EP("ep5in-iso", 5, 1024, 3, 1, 1),
+- EP("ep6out-iso", 6, 1024, 3, 1, 1),
+-};
+-#undef EP
+-
+ static struct usb_endpoint_descriptor usba_ep0_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+@@ -1074,7 +1024,6 @@ static void nop_release(struct device *d
+ static struct usba_udc the_udc = {
+ .gadget = {
+ .ops = &usba_udc_ops,
+- .ep0 = &usba_ep[0].ep,
+ .ep_list = LIST_HEAD_INIT(the_udc.gadget.ep_list),
+ .is_dualspeed = 1,
+ .name = "atmel_usba_udc",
+@@ -1231,7 +1180,7 @@ static int do_test_mode(struct usba_udc
+ } else {
+ usba_ep_writel(ep, CTL_ENB, USBA_EPT_ENABLE);
+ usba_writel(udc, TST, USBA_TST_PKT_MODE);
+- copy_to_fifo(ep->fifo, test_packet_buffer,
++ memcpy_toio(ep->fifo, test_packet_buffer,
+ sizeof(test_packet_buffer));
+ usba_ep_writel(ep, SET_STA, USBA_TX_PK_RDY);
+ dev_info(dev, "Entering Test_Packet mode...\n");
+@@ -1530,13 +1479,13 @@ restart:
+ DBG(DBG_HW, "Packet length: %u\n", pkt_len);
+ if (pkt_len != sizeof(crq)) {
+ pr_warning("udc: Invalid packet length %u "
+- "(expected %lu)\n", pkt_len, sizeof(crq));
++ "(expected %zu)\n", pkt_len, sizeof(crq));
+ set_protocol_stall(udc, ep);
+ return;
+ }
+
+ DBG(DBG_FIFO, "Copying ctrl request from 0x%p:\n", ep->fifo);
+- copy_from_fifo(crq.data, ep->fifo, sizeof(crq));
++ memcpy_fromio(crq.data, ep->fifo, sizeof(crq));
+
+ /* Free up one bank in the FIFO so that we can
+ * generate or receive a reply right away. */
+@@ -1688,6 +1637,7 @@ static irqreturn_t usba_udc_irq(int irq,
+ DBG(DBG_INT, "irq, status=%#08x\n", status);
+
+ if (status & USBA_DET_SUSPEND) {
++ toggle_bias(0);
+ usba_writel(udc, INT_CLR, USBA_DET_SUSPEND);
+ DBG(DBG_BUS, "Suspend detected\n");
+ if (udc->gadget.speed != USB_SPEED_UNKNOWN
+@@ -1699,6 +1649,7 @@ static irqreturn_t usba_udc_irq(int irq,
+ }
+
+ if (status & USBA_WAKE_UP) {
++ toggle_bias(1);
+ usba_writel(udc, INT_CLR, USBA_WAKE_UP);
+ DBG(DBG_BUS, "Wake Up CPU detected\n");
+ }
+@@ -1792,12 +1743,14 @@ static irqreturn_t usba_vbus_irq(int irq
+ vbus = gpio_get_value(udc->vbus_pin);
+ if (vbus != udc->vbus_prev) {
+ if (vbus) {
+- usba_writel(udc, CTRL, USBA_EN_USBA);
++ toggle_bias(1);
++ usba_writel(udc, CTRL, USBA_ENABLE_MASK);
+ usba_writel(udc, INT_ENB, USBA_END_OF_RESET);
+ } else {
+ udc->gadget.speed = USB_SPEED_UNKNOWN;
+ reset_all_endpoints(udc);
+- usba_writel(udc, CTRL, 0);
++ toggle_bias(0);
++ usba_writel(udc, CTRL, USBA_DISABLE_MASK);
+ spin_unlock(&udc->lock);
+ udc->driver->disconnect(&udc->gadget);
+ spin_lock(&udc->lock);
+@@ -1850,7 +1803,8 @@ int usb_gadget_register_driver(struct us
+ /* If Vbus is present, enable the controller and wait for reset */
+ spin_lock_irqsave(&udc->lock, flags);
+ if (vbus_is_present(udc) && udc->vbus_prev == 0) {
+- usba_writel(udc, CTRL, USBA_EN_USBA);
++ toggle_bias(1);
++ usba_writel(udc, CTRL, USBA_ENABLE_MASK);
+ usba_writel(udc, INT_ENB, USBA_END_OF_RESET);
+ }
+ spin_unlock_irqrestore(&udc->lock, flags);
+@@ -1883,7 +1837,8 @@ int usb_gadget_unregister_driver(struct
+ spin_unlock_irqrestore(&udc->lock, flags);
+
+ /* This will also disable the DP pullup */
+- usba_writel(udc, CTRL, 0);
++ toggle_bias(0);
++ usba_writel(udc, CTRL, USBA_DISABLE_MASK);
+
+ driver->unbind(&udc->gadget);
+ udc->gadget.dev.driver = NULL;
+@@ -1908,7 +1863,7 @@ static int __init usba_udc_probe(struct
+
+ regs = platform_get_resource(pdev, IORESOURCE_MEM, CTRL_IOMEM_ID);
+ fifo = platform_get_resource(pdev, IORESOURCE_MEM, FIFO_IOMEM_ID);
+- if (!regs || !fifo)
++ if (!regs || !fifo || !pdata)
+ return -ENXIO;
+
+ irq = platform_get_irq(pdev, 0);
+@@ -1953,19 +1908,48 @@ static int __init usba_udc_probe(struct
+
+ /* Make sure we start from a clean slate */
+ clk_enable(pclk);
+- usba_writel(udc, CTRL, 0);
++ toggle_bias(0);
++ usba_writel(udc, CTRL, USBA_DISABLE_MASK);
+ clk_disable(pclk);
+
++ usba_ep = kmalloc(sizeof(struct usba_ep) * pdata->num_ep,
++ GFP_KERNEL);
++ if (!usba_ep)
++ goto err_alloc_ep;
++
++ the_udc.gadget.ep0 = &usba_ep[0].ep;
++
+ INIT_LIST_HEAD(&usba_ep[0].ep.ep_list);
+ usba_ep[0].ep_regs = udc->regs + USBA_EPT_BASE(0);
+ usba_ep[0].dma_regs = udc->regs + USBA_DMA_BASE(0);
+ usba_ep[0].fifo = udc->fifo + USBA_FIFO_BASE(0);
+- for (i = 1; i < ARRAY_SIZE(usba_ep); i++) {
++ usba_ep[0].ep.ops = &usba_ep_ops;
++ usba_ep[0].ep.name = pdata->ep[0].name;
++ usba_ep[0].ep.maxpacket = pdata->ep[0].fifo_size;
++ usba_ep[0].udc = &the_udc;
++ INIT_LIST_HEAD(&usba_ep[0].queue);
++ usba_ep[0].fifo_size = pdata->ep[0].fifo_size;
++ usba_ep[0].nr_banks = pdata->ep[0].nr_banks;
++ usba_ep[0].index = pdata->ep[0].index;
++ usba_ep[0].can_dma = pdata->ep[0].can_dma;
++ usba_ep[0].can_isoc = pdata->ep[0].can_isoc;
++
++ for (i = 1; i < pdata->num_ep; i++) {
+ struct usba_ep *ep = &usba_ep[i];
+
+ ep->ep_regs = udc->regs + USBA_EPT_BASE(i);
+ ep->dma_regs = udc->regs + USBA_DMA_BASE(i);
+ ep->fifo = udc->fifo + USBA_FIFO_BASE(i);
++ ep->ep.ops = &usba_ep_ops;
++ ep->ep.name = pdata->ep[i].name;
++ ep->ep.maxpacket = pdata->ep[i].fifo_size;
++ ep->udc = &the_udc;
++ INIT_LIST_HEAD(&ep->queue);
++ ep->fifo_size = pdata->ep[i].fifo_size;
++ ep->nr_banks = pdata->ep[i].nr_banks;
++ ep->index = pdata->ep[i].index;
++ ep->can_dma = pdata->ep[i].can_dma;
++ ep->can_isoc = pdata->ep[i].can_isoc;
+
+ list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list);
+ }
+@@ -1984,7 +1968,7 @@ static int __init usba_udc_probe(struct
+ goto err_device_add;
+ }
+
+- if (pdata && pdata->vbus_pin != GPIO_PIN_NONE) {
++ if (pdata->vbus_pin >= 0) {
+ if (!gpio_request(pdata->vbus_pin, "atmel_usba_udc")) {
+ udc->vbus_pin = pdata->vbus_pin;
+
+@@ -2004,7 +1988,7 @@ static int __init usba_udc_probe(struct
+ }
+
+ usba_init_debugfs(udc);
+- for (i = 1; i < ARRAY_SIZE(usba_ep); i++)
++ for (i = 1; i < pdata->num_ep; i++)
+ usba_ep_init_debugfs(udc, &usba_ep[i]);
+
+ return 0;
+@@ -2012,6 +1996,8 @@ static int __init usba_udc_probe(struct
+ err_device_add:
+ free_irq(irq, udc);
+ err_request_irq:
++ kfree(usba_ep);
++err_alloc_ep:
+ iounmap(udc->fifo);
+ err_map_fifo:
+ iounmap(udc->regs);
+@@ -2029,10 +2015,11 @@ static int __exit usba_udc_remove(struct
+ {
+ struct usba_udc *udc;
+ int i;
++ struct usba_platform_data *pdata = pdev->dev.platform_data;
+
+ udc = platform_get_drvdata(pdev);
+
+- for (i = 1; i < ARRAY_SIZE(usba_ep); i++)
++ for (i = 1; i < pdata->num_ep; i++)
+ usba_ep_cleanup_debugfs(&usba_ep[i]);
+ usba_cleanup_debugfs(udc);
+
+@@ -2040,6 +2027,7 @@ static int __exit usba_udc_remove(struct
+ gpio_free(udc->vbus_pin);
+
+ free_irq(udc->irq, udc);
++ kfree(usba_ep);
+ iounmap(udc->fifo);
+ iounmap(udc->regs);
+ clk_put(udc->hclk);
+--- a/drivers/usb/gadget/atmel_usba_udc.h
++++ b/drivers/usb/gadget/atmel_usba_udc.h
+@@ -41,6 +41,15 @@
+ #define USBA_EN_USBA (1 << 8)
+ #define USBA_DETACH (1 << 9)
+ #define USBA_REMOTE_WAKE_UP (1 << 10)
++#define USBA_PULLD_DIS (1 << 11)
++
++#if defined(CONFIG_AVR32)
++#define USBA_ENABLE_MASK USBA_EN_USBA
++#define USBA_DISABLE_MASK 0
++#elif defined(CONFIG_ARCH_AT91)
++#define USBA_ENABLE_MASK (USBA_EN_USBA | USBA_PULLD_DIS)
++#define USBA_DISABLE_MASK USBA_DETACH
++#endif /* CONFIG_ARCH_AT91 */
+
+ /* Bitfields in FNUM */
+ #define USBA_MICRO_FRAME_NUM_OFFSET 0
+--- a/drivers/video/atmel_lcdfb.c
++++ b/drivers/video/atmel_lcdfb.c
+@@ -38,7 +38,9 @@
+ #endif
+
+ #if defined(CONFIG_ARCH_AT91)
+-#define ATMEL_LCDFB_FBINFO_DEFAULT FBINFO_DEFAULT
++#define ATMEL_LCDFB_FBINFO_DEFAULT (FBINFO_DEFAULT \
++ | FBINFO_PARTIAL_PAN_OK \
++ | FBINFO_HWACCEL_YPAN)
+
+ static inline void atmel_lcdfb_update_dma2d(struct atmel_lcdfb_info *sinfo,
+ struct fb_var_screeninfo *var)
+@@ -176,7 +178,7 @@ static struct fb_fix_screeninfo atmel_lc
+ .type = FB_TYPE_PACKED_PIXELS,
+ .visual = FB_VISUAL_TRUECOLOR,
+ .xpanstep = 0,
+- .ypanstep = 0,
++ .ypanstep = 1,
+ .ywrapstep = 0,
+ .accel = FB_ACCEL_NONE,
+ };
+@@ -250,6 +252,8 @@ static int atmel_lcdfb_alloc_video_memor
+ return -ENOMEM;
+ }
+
++ memset(info->screen_base, 0, info->fix.smem_len);
+
-+ return 0;
+ return 0;
+ }
+
+@@ -634,7 +638,6 @@ static int __init atmel_lcdfb_init_fbinf
+ struct fb_info *info = sinfo->info;
+ int ret = 0;
+
+- memset_io(info->screen_base, 0, info->fix.smem_len);
+ info->var.activate |= FB_ACTIVATE_FORCE | FB_ACTIVATE_NOW;
+
+ dev_info(info->device,
+@@ -764,6 +767,11 @@ static int __init atmel_lcdfb_probe(stru
+ info->screen_base = ioremap(info->fix.smem_start, info->fix.smem_len);
+ if (!info->screen_base)
+ goto release_intmem;
+
-+out_free_card:
-+ snd_card_free(card);
-+out:
-+ return err;
-+}
++ /*
++ * Don't clear the framebuffer -- someone may have set
++ * up a splash image.
++ */
+ } else {
+ /* alocate memory buffer */
+ ret = atmel_lcdfb_alloc_video_memory(sinfo);
+--- a/fs/fs-writeback.c
++++ b/fs/fs-writeback.c
+@@ -385,8 +385,6 @@ __writeback_single_inode(struct inode *i
+ * WB_SYNC_HOLD is a hack for sys_sync(): reattach the inode to sb->s_dirty so
+ * that it can be located for waiting on in __writeback_single_inode().
+ *
+- * Called under inode_lock.
+- *
+ * If `bdi' is non-zero then we're being asked to writeback a specific queue.
+ * This function assumes that the blockdev superblock's inodes are backed by
+ * a variety of queues, so all inodes are searched. For other superblocks,
+@@ -402,11 +400,12 @@ __writeback_single_inode(struct inode *i
+ * on the writer throttling path, and we get decent balancing between many
+ * throttled threads: we don't want them all piling up on inode_sync_wait.
+ */
+-static void
+-sync_sb_inodes(struct super_block *sb, struct writeback_control *wbc)
++void generic_sync_sb_inodes(struct super_block *sb,
++ struct writeback_control *wbc)
+ {
+ const unsigned long start = jiffies; /* livelock avoidance */
+
++ spin_lock(&inode_lock);
+ if (!wbc->for_kupdate || list_empty(&sb->s_io))
+ queue_io(sb, wbc->older_than_this);
+
+@@ -485,8 +484,16 @@ sync_sb_inodes(struct super_block *sb, s
+ if (!list_empty(&sb->s_more_io))
+ wbc->more_io = 1;
+ }
++ spin_unlock(&inode_lock);
+ return; /* Leave any unwritten inodes on s_io */
+ }
++EXPORT_SYMBOL_GPL(generic_sync_sb_inodes);
+
-+#ifdef CONFIG_PM
-+ static int
-+snd_atmel_ac97_suspend(struct platform_device *pdev, pm_message_t msg)
++static void sync_sb_inodes(struct super_block *sb,
++ struct writeback_control *wbc)
+{
-+ struct snd_card *card = platform_get_drvdata(pdev);
-+ struct atmel_ac97 *chip = card->private_data;
++ generic_sync_sb_inodes(sb, wbc);
++}
+
+ /*
+ * Start writeback of dirty pagecache data against all unlocked inodes.
+@@ -526,11 +533,8 @@ restart:
+ * be unmounted by the time it is released.
+ */
+ if (down_read_trylock(&sb->s_umount)) {
+- if (sb->s_root) {
+- spin_lock(&inode_lock);
++ if (sb->s_root)
+ sync_sb_inodes(sb, wbc);
+- spin_unlock(&inode_lock);
+- }
+ up_read(&sb->s_umount);
+ }
+ spin_lock(&sb_lock);
+@@ -568,9 +572,7 @@ void sync_inodes_sb(struct super_block *
+ (inodes_stat.nr_inodes - inodes_stat.nr_unused) +
+ nr_dirty + nr_unstable;
+ wbc.nr_to_write += wbc.nr_to_write / 2; /* Bit more for luck */
+- spin_lock(&inode_lock);
+ sync_sb_inodes(sb, &wbc);
+- spin_unlock(&inode_lock);
+ }
+
+ /*
+--- a/include/asm-avr32/arch-at32ap/board.h
++++ b/include/asm-avr32/arch-at32ap/board.h
+@@ -8,6 +8,12 @@
+
+ #define GPIO_PIN_NONE (-1)
+
++/*
++ * Clock rates for various on-board oscillators. The number of entries
++ * in this array is chip-dependent.
++ */
++extern unsigned long at32_board_osc_rates[];
++
+ /* Add basic devices: system manager, interrupt controller, portmuxes, etc. */
+ void at32_add_system_devices(void);
+
+@@ -36,11 +42,10 @@ at32_add_device_spi(unsigned int id, str
+ struct atmel_lcdfb_info;
+ struct platform_device *
+ at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
+- unsigned long fbmem_start, unsigned long fbmem_len);
++ unsigned long fbmem_start, unsigned long fbmem_len,
++ unsigned int pin_config);
+
+-struct usba_platform_data {
+- int vbus_pin;
+-};
++struct usba_platform_data;
+ struct platform_device *
+ at32_add_device_usba(unsigned int id, struct usba_platform_data *data);
+
+@@ -68,9 +73,27 @@ struct platform_device *at32_add_device_
+ struct platform_device *
+ at32_add_device_ssc(unsigned int id, unsigned int flags);
+
+-struct platform_device *at32_add_device_twi(unsigned int id);
+-struct platform_device *at32_add_device_mci(unsigned int id);
+-struct platform_device *at32_add_device_ac97c(unsigned int id);
++struct i2c_board_info;
++struct platform_device *at32_add_device_twi(unsigned int id,
++ struct i2c_board_info *b,
++ unsigned int n);
+
-+ clk_disable(chip->mck);
++struct mci_platform_data {
++ int detect_pin;
++ int wp_pin;
++};
++struct platform_device *
++at32_add_device_mci(unsigned int id, struct mci_platform_data *data);
+
-+ return 0;
-+}
++struct ac97c_platform_data {
++ unsigned short dma_rx_periph_id;
++ unsigned short dma_tx_periph_id;
++ unsigned short dma_controller_id;
++ int reset_pin;
++};
++struct platform_device *
++at32_add_device_ac97c(unsigned int id, struct ac97c_platform_data *data);
++
+ struct platform_device *at32_add_device_abdac(unsigned int id);
+
+ struct cf_platform_data {
+@@ -84,4 +107,20 @@ struct platform_device *
+ at32_add_device_cf(unsigned int id, unsigned int extint,
+ struct cf_platform_data *data);
+
++struct platform_device *
++at32_add_device_psif(unsigned int id);
++
++/* NAND / SmartMedia */
++struct atmel_nand_data {
++ int enable_pin; /* chip enable */
++ int det_pin; /* card detect */
++ int rdy_pin; /* ready/busy */
++ u8 ale; /* address line number connected to ALE */
++ u8 cle; /* address line number connected to CLE */
++ u8 bus_width_16; /* buswidth is 16 bit */
++ struct mtd_partition *(*partition_info)(int size, int *num_partitions);
++};
++struct platform_device *
++at32_add_device_nand(unsigned int id, struct atmel_nand_data *data);
++
+ #endif /* __ASM_ARCH_BOARD_H */
+--- a/include/asm-avr32/arch-at32ap/init.h
++++ b/include/asm-avr32/arch-at32ap/init.h
+@@ -13,10 +13,6 @@
+ void setup_platform(void);
+ void setup_board(void);
+
+-/* Called by setup_platform */
+-void at32_clock_init(void);
+-void at32_portmux_init(void);
+-
+ void at32_setup_serial_console(unsigned int usart_id);
+
+ #endif /* __ASM_AVR32_AT32AP_INIT_H__ */
+--- /dev/null
++++ b/include/asm-avr32/arch-at32ap/pm.h
+@@ -0,0 +1,51 @@
++/*
++ * AVR32 AP Power Management.
++ *
++ * Copyright (C) 2008 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#ifndef __ASM_AVR32_ARCH_PM_H
++#define __ASM_AVR32_ARCH_PM_H
+
-+static int snd_atmel_ac97_resume(struct platform_device *pdev)
-+{
-+ struct snd_card *card = dev_get_drvdata(pdev);
-+ struct atmel_ac97 *chip = card->private_data;
++/* Possible arguments to the "sleep" instruction */
++#define CPU_SLEEP_IDLE 0
++#define CPU_SLEEP_FROZEN 1
++#define CPU_SLEEP_STANDBY 2
++#define CPU_SLEEP_STOP 3
++#define CPU_SLEEP_STATIC 5
+
-+ clk_enable(chip->mck);
++#ifndef __ASSEMBLY__
++extern void cpu_enter_idle(void);
++extern void cpu_enter_standby(unsigned long sdramc_base);
+
-+ return 0;
-+}
-+#else
-+#define snd_atmel_ac97_suspend NULL
-+#define snd_atmel_ac97_resume NULL
-+#endif
++extern bool disable_idle_sleep;
+
-+static int __devexit snd_atmel_ac97_remove(struct platform_device *pdev)
++static inline void cpu_disable_idle_sleep(void)
+{
-+ struct snd_card *card = platform_get_drvdata(pdev);
-+
-+ snd_card_free(card);
-+ platform_set_drvdata(pdev, NULL);
-+ return 0;
++ disable_idle_sleep = true;
+}
+
-+static struct platform_driver atmel_ac97_driver = {
-+ .remove = __devexit_p(snd_atmel_ac97_remove),
-+ .driver = {
-+ .name = "atmel_ac97c",
-+ },
-+ .suspend = snd_atmel_ac97_suspend,
-+ .resume = snd_atmel_ac97_resume,
-+};
-+
-+static int __init atmel_ac97_init(void)
++static inline void cpu_enable_idle_sleep(void)
+{
-+ return platform_driver_probe(&atmel_ac97_driver,
-+ snd_atmel_ac97_probe);
++ disable_idle_sleep = false;
+}
-+module_init(atmel_ac97_init);
+
-+static void __exit atmel_ac97_exit(void)
++static inline void cpu_idle_sleep(void)
+{
-+ platform_driver_unregister(&atmel_ac97_driver);
++ /*
++ * If we're using the COUNT and COMPARE registers for
++ * timekeeping, we can't use the IDLE state.
++ */
++ if (disable_idle_sleep)
++ cpu_relax();
++ else
++ cpu_enter_idle();
+}
-+module_exit(atmel_ac97_exit);
+
-+MODULE_LICENSE("GPL");
-+MODULE_DESCRIPTION("Driver for Atmel AC97 Controller");
-+MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
-diff --git a/sound/avr32/ac97c.h b/sound/avr32/ac97c.h
-new file mode 100644
-index 0000000..96246e7
++void intc_set_suspend_handler(unsigned long offset);
++#endif
++
++#endif /* __ASM_AVR32_ARCH_PM_H */
+--- a/include/asm-avr32/arch-at32ap/portmux.h
++++ b/include/asm-avr32/arch-at32ap/portmux.h
+@@ -26,4 +26,16 @@ void at32_select_periph(unsigned int pin
+ void at32_select_gpio(unsigned int pin, unsigned long flags);
+ void at32_reserve_pin(unsigned int pin);
+
++#ifdef CONFIG_GPIO_DEV
++
++/* Gang allocators and accessors; used by the GPIO /dev driver */
++int at32_gpio_port_is_valid(unsigned int port);
++int at32_select_gpio_pins(unsigned int port, u32 pins, u32 oe_mask);
++void at32_deselect_pins(unsigned int port, u32 pins);
++
++u32 at32_gpio_get_value_multiple(unsigned int port, u32 pins);
++void at32_gpio_set_value_multiple(unsigned int port, u32 value, u32 mask);
++
++#endif /* CONFIG_GPIO_DEV */
++
+ #endif /* __ASM_ARCH_PORTMUX_H__ */
--- /dev/null
-+++ b/sound/avr32/ac97c.h
-@@ -0,0 +1,71 @@
++++ b/include/asm-avr32/arch-at32ap/sram.h
+@@ -0,0 +1,30 @@
+/*
-+ * Register definitions for the Atmel AC97 Controller.
++ * Simple SRAM allocator
+ *
-+ * Copyright (C) 2005-2006 Atmel Corporation
++ * Copyright (C) 2008 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
-+#ifndef __SOUND_AVR32_AC97C_H
-+#define __SOUND_AVR32_AC97C_H
-+
-+#define AC97C_MR 0x08
-+#define AC97C_ICA 0x10
-+#define AC97C_OCA 0x14
-+#define AC97C_CARHR 0x20
-+#define AC97C_CATHR 0x24
-+#define AC97C_CASR 0x28
-+#define AC97C_CAMR 0x2c
-+#define AC97C_CBRHR 0x30
-+#define AC97C_CBTHR 0x34
-+#define AC97C_CBSR 0x38
-+#define AC97C_CBMR 0x3c
-+#define AC97C_CORHR 0x40
-+#define AC97C_COTHR 0x44
-+#define AC97C_COSR 0x48
-+#define AC97C_COMR 0x4c
-+#define AC97C_SR 0x50
-+#define AC97C_IER 0x54
-+#define AC97C_IDR 0x58
-+#define AC97C_IMR 0x5c
-+#define AC97C_VERSION 0xfc
-+
-+#define AC97C_CATPR PDC_TPR
-+#define AC97C_CATCR PDC_TCR
-+#define AC97C_CATNPR PDC_TNPR
-+#define AC97C_CATNCR PDC_TNCR
-+#define AC97C_CARPR PDC_RPR
-+#define AC97C_CARCR PDC_RCR
-+#define AC97C_CARNPR PDC_RNPR
-+#define AC97C_CARNCR PDC_RNCR
-+#define AC97C_PTCR PDC_PTCR
-+
-+#define AC97C_MR_ENA (1 << 0)
-+#define AC97C_MR_WRST (1 << 1)
-+#define AC97C_MR_VRA (1 << 2)
++#ifndef __ASM_AVR32_ARCH_SRAM_H
++#define __ASM_AVR32_ARCH_SRAM_H
+
-+#define AC97C_CSR_TXRDY (1 << 0)
-+#define AC97C_CSR_UNRUN (1 << 2)
-+#define AC97C_CSR_RXRDY (1 << 4)
-+#define AC97C_CSR_ENDTX (1 << 10)
-+#define AC97C_CSR_ENDRX (1 << 14)
++#include <linux/genalloc.h>
+
-+#define AC97C_CMR_SIZE_20 (0 << 16)
-+#define AC97C_CMR_SIZE_18 (1 << 16)
-+#define AC97C_CMR_SIZE_16 (2 << 16)
-+#define AC97C_CMR_SIZE_10 (3 << 16)
-+#define AC97C_CMR_CEM_LITTLE (1 << 18)
-+#define AC97C_CMR_CEM_BIG (0 << 18)
-+#define AC97C_CMR_CENA (1 << 21)
-+#define AC97C_CMR_PDCEN (1 << 22)
++extern struct gen_pool *sram_pool;
+
-+#define AC97C_SR_CAEVT (1 << 3)
++static inline unsigned long sram_alloc(size_t len)
++{
++ if (!sram_pool)
++ return 0UL;
+
-+#define AC97C_CH_ASSIGN(slot, channel) \
-+ (AC97C_CHANNEL_##channel << (3 * (AC97_SLOT_##slot - 3)))
-+#define AC97C_CHANNEL_NONE 0x0
-+#define AC97C_CHANNEL_A 0x1
-+#define AC97C_CHANNEL_B 0x2
++ return gen_pool_alloc(sram_pool, len);
++}
+
-+#endif /* __SOUND_AVR32_AC97C_H */
-diff --git a/sound/oss/Kconfig b/sound/oss/Kconfig
-index af37cd0..e3cc557 100644
---- a/sound/oss/Kconfig
-+++ b/sound/oss/Kconfig
-@@ -654,3 +654,7 @@ config SOUND_SH_DAC_AUDIO_CHANNEL
- int "DAC channel"
- default "1"
- depends on SOUND_SH_DAC_AUDIO
++static inline void sram_free(unsigned long addr, size_t len)
++{
++ return gen_pool_free(sram_pool, addr, len);
++}
+
-+config SOUND_AT32_ABDAC
-+ tristate "Atmel AT32 Audio Bitstream DAC (ABDAC) support"
-+ depends on SOUND_PRIME && AVR32
-diff --git a/sound/oss/Makefile b/sound/oss/Makefile
-index 1200670..fafc246 100644
---- a/sound/oss/Makefile
-+++ b/sound/oss/Makefile
-@@ -10,6 +10,7 @@ obj-$(CONFIG_SOUND_CS4232) += cs4232.o ad1848.o
++#endif /* __ASM_AVR32_ARCH_SRAM_H */
+--- a/include/asm-avr32/arch-at32ap/time.h
++++ /dev/null
+@@ -1,112 +0,0 @@
+-/*
+- * Copyright (C) 2007 Atmel Corporation
+- *
+- * This program is free software; you can redistribute it and/or modify
+- * it under the terms of the GNU General Public License version 2 as
+- * published by the Free Software Foundation.
+- */
+-
+-#ifndef _ASM_AVR32_ARCH_AT32AP_TIME_H
+-#define _ASM_AVR32_ARCH_AT32AP_TIME_H
+-
+-#include <linux/platform_device.h>
+-
+-extern struct irqaction timer_irqaction;
+-extern struct platform_device at32_systc0_device;
+-extern void local_timer_interrupt(int irq, void *dev_id);
+-
+-#define TIMER_BCR 0x000000c0
+-#define TIMER_BCR_SYNC 0
+-#define TIMER_BMR 0x000000c4
+-#define TIMER_BMR_TC0XC0S 0
+-#define TIMER_BMR_TC1XC1S 2
+-#define TIMER_BMR_TC2XC2S 4
+-#define TIMER_CCR 0x00000000
+-#define TIMER_CCR_CLKDIS 1
+-#define TIMER_CCR_CLKEN 0
+-#define TIMER_CCR_SWTRG 2
+-#define TIMER_CMR 0x00000004
+-#define TIMER_CMR_ABETRG 10
+-#define TIMER_CMR_ACPA 16
+-#define TIMER_CMR_ACPC 18
+-#define TIMER_CMR_AEEVT 20
+-#define TIMER_CMR_ASWTRG 22
+-#define TIMER_CMR_BCPB 24
+-#define TIMER_CMR_BCPC 26
+-#define TIMER_CMR_BEEVT 28
+-#define TIMER_CMR_BSWTRG 30
+-#define TIMER_CMR_BURST 4
+-#define TIMER_CMR_CLKI 3
+-#define TIMER_CMR_CPCDIS 7
+-#define TIMER_CMR_CPCSTOP 6
+-#define TIMER_CMR_CPCTRG 14
+-#define TIMER_CMR_EEVT 10
+-#define TIMER_CMR_EEVTEDG 8
+-#define TIMER_CMR_ENETRG 12
+-#define TIMER_CMR_ETRGEDG 8
+-#define TIMER_CMR_LDBDIS 7
+-#define TIMER_CMR_LDBSTOP 6
+-#define TIMER_CMR_LDRA 16
+-#define TIMER_CMR_LDRB 18
+-#define TIMER_CMR_TCCLKS 0
+-#define TIMER_CMR_WAVE 15
+-#define TIMER_CMR_WAVSEL 13
+-#define TIMER_CV 0x00000010
+-#define TIMER_CV_CV 0
+-#define TIMER_IDR 0x00000028
+-#define TIMER_IDR_COVFS 0
+-#define TIMER_IDR_CPAS 2
+-#define TIMER_IDR_CPBS 3
+-#define TIMER_IDR_CPCS 4
+-#define TIMER_IDR_ETRGS 7
+-#define TIMER_IDR_LDRAS 5
+-#define TIMER_IDR_LDRBS 6
+-#define TIMER_IDR_LOVRS 1
+-#define TIMER_IER 0x00000024
+-#define TIMER_IER_COVFS 0
+-#define TIMER_IER_CPAS 2
+-#define TIMER_IER_CPBS 3
+-#define TIMER_IER_CPCS 4
+-#define TIMER_IER_ETRGS 7
+-#define TIMER_IER_LDRAS 5
+-#define TIMER_IER_LDRBS 6
+-#define TIMER_IER_LOVRS 1
+-#define TIMER_IMR 0x0000002c
+-#define TIMER_IMR_COVFS 0
+-#define TIMER_IMR_CPAS 2
+-#define TIMER_IMR_CPBS 3
+-#define TIMER_IMR_CPCS 4
+-#define TIMER_IMR_ETRGS 7
+-#define TIMER_IMR_LDRAS 5
+-#define TIMER_IMR_LDRBS 6
+-#define TIMER_IMR_LOVRS 1
+-#define TIMER_RA 0x00000014
+-#define TIMER_RA_RA 0
+-#define TIMER_RB 0x00000018
+-#define TIMER_RB_RB 0
+-#define TIMER_RC 0x0000001c
+-#define TIMER_RC_RC 0
+-#define TIMER_SR 0x00000020
+-#define TIMER_SR_CLKSTA 16
+-#define TIMER_SR_COVFS 0
+-#define TIMER_SR_CPAS 2
+-#define TIMER_SR_CPBS 3
+-#define TIMER_SR_CPCS 4
+-#define TIMER_SR_ETRGS 7
+-#define TIMER_SR_LDRAS 5
+-#define TIMER_SR_LDRBS 6
+-#define TIMER_SR_LOVRS 1
+-#define TIMER_SR_MTIOA 17
+-#define TIMER_SR_MTIOB 18
+-
+-/* Bit manipulation macros */
+-#define TIMER_BIT(name) (1 << TIMER_##name)
+-#define TIMER_BF(name,value) ((value) << TIMER_##name)
+-
+-/* Register access macros */
+-#define timer_read(port,instance,reg) \
+- __raw_readl(port + (0x40 * instance) + TIMER_##reg)
+-#define timer_write(port,instance,reg,value) \
+- __raw_writel((value), port + (0x40 * instance) + TIMER_##reg)
+-
+-#endif /* _ASM_AVR32_ARCH_AT32AP_TIME_H */
+--- a/include/asm-avr32/asm.h
++++ b/include/asm-avr32/asm.h
+@@ -12,10 +12,10 @@
+ #include <asm/asm-offsets.h>
+ #include <asm/thread_info.h>
- # Please leave it as is, cause the link order is significant !
+-#define mask_interrupts ssrf SR_GM_BIT
+-#define mask_exceptions ssrf SR_EM_BIT
+-#define unmask_interrupts csrf SR_GM_BIT
+-#define unmask_exceptions csrf SR_EM_BIT
++#define mask_interrupts ssrf SYSREG_GM_OFFSET
++#define mask_exceptions ssrf SYSREG_EM_OFFSET
++#define unmask_interrupts csrf SYSREG_GM_OFFSET
++#define unmask_exceptions csrf SYSREG_EM_OFFSET
-+obj-$(CONFIG_SOUND_AT32_ABDAC) += at32_abdac.o
- obj-$(CONFIG_SOUND_SH_DAC_AUDIO) += sh_dac_audio.o
- obj-$(CONFIG_SOUND_HAL2) += hal2.o
- obj-$(CONFIG_SOUND_AEDSP16) += aedsp16.o
-diff --git a/sound/oss/at32_abdac.c b/sound/oss/at32_abdac.c
-new file mode 100644
-index 0000000..cb997d7
+ #ifdef CONFIG_FRAME_POINTER
+ .macro save_fp
--- /dev/null
-+++ b/sound/oss/at32_abdac.c
-@@ -0,0 +1,722 @@
++++ b/include/asm-avr32/dma-controller.h
+@@ -0,0 +1,166 @@
+/*
-+ * OSS Sound Driver for the Atmel AT32 on-chip DAC.
-+ *
-+ * Copyright (C) 2006 Atmel Corporation
++ * Copyright (C) 2005-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
-+#include <linux/clk.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/fs.h>
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/sound.h>
-+#include <linux/soundcard.h>
++#ifndef __ASM_AVR32_DMA_CONTROLLER_H
++#define __ASM_AVR32_DMA_CONTROLLER_H
+
-+#include <asm/byteorder.h>
-+#include <asm/dma-controller.h>
-+#include <asm/io.h>
-+#include <asm/uaccess.h>
++#include <linux/device.h>
+
-+/* We want to use the "bizarre" swap-bytes-in-each-halfword macro */
-+#include <linux/byteorder/swabb.h>
++#define DMA_DIR_MEM_TO_MEM 0x0000
++#define DMA_DIR_MEM_TO_PERIPH 0x0001
++#define DMA_DIR_PERIPH_TO_MEM 0x0002
++#define DMA_DIR_PERIPH_TO_PERIPH 0x0003
+
-+#include "at32_abdac.h"
++#define DMA_WIDTH_8BIT 0
++#define DMA_WIDTH_16BIT 1
++#define DMA_WIDTH_32BIT 2
++
++struct dma_request {
++ struct dma_controller *dmac;
++ struct list_head list;
++
++ unsigned short channel;
++
++ void (*xfer_complete)(struct dma_request *req);
++ void (*block_complete)(struct dma_request *req);
++ void (*error)(struct dma_request *req);
++};
++
++struct dma_request_sg {
++ struct dma_request req;
++
++ int nr_sg;
++ struct scatterlist *sg;
++ unsigned long block_size;
++ unsigned int nr_blocks;
++
++ dma_addr_t data_reg;
++ unsigned short periph_id;
++
++ unsigned char direction;
++ unsigned char width;
++};
++#define to_dma_request_sg(_req) \
++ container_of(_req, struct dma_request_sg, req)
++
++struct dma_request_cyclic {
++ struct dma_request req;
++
++ int periods;
++ unsigned long buffer_size;
++
++ dma_addr_t buffer_start;
++ dma_addr_t data_reg;
++
++ unsigned short periph_id;
++ unsigned char direction;
++ unsigned char width;
++
++ void *dev_id;
++};
++#define to_dma_request_cyclic(_req) \
++ container_of(_req, struct dma_request_cyclic, req)
++
++struct dma_request_memcpy {
++ struct dma_request req;
++
++ dma_addr_t src_addr;
++ unsigned int src_width;
++ unsigned int src_stride;
++
++ dma_addr_t dst_addr;
++ unsigned int dst_width;
++ unsigned int dst_stride;
++
++ size_t length;
++
++ unsigned short src_reverse:1;
++ unsigned short dst_reverse:1;
++};
++#define to_dma_request_memcpy(_req) \
++ container_of(_req, struct dma_request_memcpy, req)
+
-+#define DMA_BUFFER_SIZE 32768
-+#define DMA_PERIOD_SHIFT 10
-+#define DMA_PERIOD_SIZE (1 << DMA_PERIOD_SHIFT)
-+#define DMA_WRITE_THRESHOLD DMA_PERIOD_SIZE
++struct dma_controller {
++ struct list_head list;
++ int id;
++ struct device *dev;
+
-+struct sound_settings {
-+ unsigned int format;
-+ unsigned int channels;
-+ unsigned int sample_rate;
-+ /* log2(bytes per sample) */
-+ unsigned int input_order;
++ int (*alloc_channel)(struct dma_controller *dmac);
++ void (*release_channel)(struct dma_controller *dmac,
++ int channel);
++ int (*prepare_request_sg)(struct dma_controller *dmac,
++ struct dma_request_sg *req);
++ int (*prepare_request_cyclic)(struct dma_controller *dmac,
++ struct dma_request_cyclic *req);
++ int (*prepare_request_memcpy)(struct dma_controller *dmac,
++ struct dma_request_memcpy *req);
++ int (*start_request)(struct dma_controller *dmac,
++ unsigned int channel);
++ int (*stop_request)(struct dma_controller *dmac,
++ unsigned int channel);
++ dma_addr_t (*get_current_pos)(struct dma_controller *dmac,
++ unsigned int channel);
+};
+
-+struct at32_dac {
-+ spinlock_t lock;
-+ void __iomem *regs;
++static inline int
++dma_alloc_channel(struct dma_controller *dmac)
++{
++ return dmac->alloc_channel(dmac);
++}
+
-+ /* head and tail refer to number of words */
-+ struct {
-+ u32 *buf;
-+ int head;
-+ int tail;
-+ } dma;
++static inline void
++dma_release_channel(struct dma_controller *dmac, int chan)
++{
++ dmac->release_channel(dmac, chan);
++}
+
-+ struct semaphore sem;
-+ wait_queue_head_t write_wait;
++static inline int
++dma_prepare_request_sg(struct dma_controller *dmac,
++ struct dma_request_sg *req)
++{
++ return dmac->prepare_request_sg(dmac, req);
++}
+
-+ /*
-+ * Read at most ucount bytes from ubuf, translate to 2-channel
-+ * signed 16-bit big endian format and write to the DMA buffer
-+ * as long as there is room left. Return the number of bytes
-+ * successfully copied from ubuf, or -EFAULT if the first
-+ * sample from ubuf couldn't be read. This function is not
-+ * called unless there is room for at least one sample (4
-+ * bytes) in the DMA buffer.
-+ */
-+ ssize_t (*trans)(struct at32_dac *dac, const char __user *ubuf,
-+ size_t ucount);
++static inline int
++dma_prepare_request_cyclic(struct dma_controller *dmac,
++ struct dma_request_cyclic *req)
++{
++ return dmac->prepare_request_cyclic(dmac, req);
++}
+
-+ struct sound_settings dsp_settings;
-+ struct dma_request_cyclic req;
++static inline int
++dma_prepare_request_memcpy(struct dma_controller *dmac,
++ struct dma_request_memcpy *req)
++{
++ return dmac->prepare_request_memcpy(dmac, req);
++}
+
-+ struct clk *mck;
-+ struct clk *sample_clk;
-+ struct platform_device *pdev;
-+ int busy;
-+ int playing;
-+ int dev_dsp;
-+};
-+static struct at32_dac *the_dac;
++static inline int
++dma_start_request(struct dma_controller *dmac,
++ unsigned int channel)
++{
++ return dmac->start_request(dmac, channel);
++}
+
-+static inline unsigned int abdac_get_head(struct at32_dac *dac)
++static inline int
++dma_stop_request(struct dma_controller *dmac,
++ unsigned int channel)
+{
-+ return dac->dma.head & ((DMA_BUFFER_SIZE / 4) - 1);
++ return dmac->stop_request(dmac, channel);
+}
+
-+static inline unsigned int abdac_get_tail(struct at32_dac *dac)
++static inline dma_addr_t
++dma_get_current_pos(struct dma_controller *dmac,
++ unsigned int channel)
+{
-+ return dac->dma.tail & ((DMA_BUFFER_SIZE / 4) - 1);
++ return dmac->get_current_pos(dmac, channel);
+}
+
-+static inline unsigned int abdac_dma_space(struct at32_dac *dac)
++extern int register_dma_controller(struct dma_controller *dmac);
++extern struct dma_controller *find_dma_controller(int id);
++
++#endif /* __ASM_AVR32_DMA_CONTROLLER_H */
+--- a/include/asm-avr32/intc.h
++++ /dev/null
+@@ -1,128 +0,0 @@
+-#ifndef __ASM_AVR32_INTC_H
+-#define __ASM_AVR32_INTC_H
+-
+-#include <linux/sysdev.h>
+-#include <linux/interrupt.h>
+-
+-struct irq_controller;
+-struct irqaction;
+-struct pt_regs;
+-
+-struct platform_device;
+-
+-/* Information about the internal interrupt controller */
+-struct intc_device {
+- /* ioremapped address of configuration block */
+- void __iomem *regs;
+-
+- /* the physical device */
+- struct platform_device *pdev;
+-
+- /* Number of interrupt lines per group. */
+- unsigned int irqs_per_group;
+-
+- /* The highest group ID + 1 */
+- unsigned int nr_groups;
+-
+- /*
+- * Bitfield indicating which groups are actually in use. The
+- * size of the array is
+- * ceil(group_max / (8 * sizeof(unsigned int))).
+- */
+- unsigned int group_mask[];
+-};
+-
+-struct irq_controller_class {
+- /*
+- * A short name identifying this kind of controller.
+- */
+- const char *typename;
+- /*
+- * Handle the IRQ. Must do any necessary acking and masking.
+- */
+- irqreturn_t (*handle)(int irq, void *dev_id, struct pt_regs *regs);
+- /*
+- * Register a new IRQ handler.
+- */
+- int (*setup)(struct irq_controller *ctrl, unsigned int irq,
+- struct irqaction *action);
+- /*
+- * Unregister a IRQ handler.
+- */
+- void (*free)(struct irq_controller *ctrl, unsigned int irq,
+- void *dev_id);
+- /*
+- * Mask the IRQ in the interrupt controller.
+- */
+- void (*mask)(struct irq_controller *ctrl, unsigned int irq);
+- /*
+- * Unmask the IRQ in the interrupt controller.
+- */
+- void (*unmask)(struct irq_controller *ctrl, unsigned int irq);
+- /*
+- * Set the type of the IRQ. See below for possible types.
+- * Return -EINVAL if a given type is not supported
+- */
+- int (*set_type)(struct irq_controller *ctrl, unsigned int irq,
+- unsigned int type);
+- /*
+- * Return the IRQ type currently set
+- */
+- unsigned int (*get_type)(struct irq_controller *ctrl, unsigned int irq);
+-};
+-
+-struct irq_controller {
+- struct irq_controller_class *class;
+- unsigned int irq_group;
+- unsigned int first_irq;
+- unsigned int nr_irqs;
+- struct list_head list;
+-};
+-
+-struct intc_group_desc {
+- struct irq_controller *ctrl;
+- irqreturn_t (*handle)(int, void *, struct pt_regs *);
+- unsigned long flags;
+- void *dev_id;
+- const char *devname;
+-};
+-
+-/*
+- * The internal interrupt controller. Defined in board/part-specific
+- * devices.c.
+- * TODO: Should probably be defined per-cpu.
+- */
+-extern struct intc_device intc;
+-
+-extern int request_internal_irq(unsigned int irq,
+- irqreturn_t (*handler)(int, void *, struct pt_regs *),
+- unsigned long irqflags,
+- const char *devname, void *dev_id);
+-extern void free_internal_irq(unsigned int irq);
+-
+-/* Only used by time_init() */
+-extern int setup_internal_irq(unsigned int irq, struct intc_group_desc *desc);
+-
+-/*
+- * Set interrupt priority for a given group. `group' can be found by
+- * using irq_to_group(irq). Priority can be from 0 (lowest) to 3
+- * (highest). Higher-priority interrupts will preempt lower-priority
+- * interrupts (unless interrupts are masked globally).
+- *
+- * This function does not check for conflicts within a group.
+- */
+-extern int intc_set_priority(unsigned int group,
+- unsigned int priority);
+-
+-/*
+- * Returns a bitmask of pending interrupts in a group.
+- */
+-extern unsigned long intc_get_pending(unsigned int group);
+-
+-/*
+- * Register a new external interrupt controller. Returns the first
+- * external IRQ number that is assigned to the new controller.
+- */
+-extern int intc_register_controller(struct irq_controller *ctrl);
+-
+-#endif /* __ASM_AVR32_INTC_H */
+--- a/include/asm-avr32/irq.h
++++ b/include/asm-avr32/irq.h
+@@ -14,6 +14,11 @@
+ #ifndef __ASSEMBLER__
+ int nmi_enable(void);
+ void nmi_disable(void);
++
++/*
++ * Returns a bitmask of pending interrupts in a group.
++ */
++extern unsigned long intc_get_pending(unsigned int group);
+ #endif
+
+ #endif /* __ASM_AVR32_IOCTLS_H */
+--- a/include/asm-avr32/mmu_context.h
++++ b/include/asm-avr32/mmu_context.h
+@@ -13,7 +13,6 @@
+ #define __ASM_AVR32_MMU_CONTEXT_H
+
+ #include <asm/tlbflush.h>
+-#include <asm/pgalloc.h>
+ #include <asm/sysreg.h>
+ #include <asm-generic/mm_hooks.h>
+
+--- a/include/asm-avr32/page.h
++++ b/include/asm-avr32/page.h
+@@ -8,13 +8,11 @@
+ #ifndef __ASM_AVR32_PAGE_H
+ #define __ASM_AVR32_PAGE_H
+
++#include <linux/const.h>
++
+ /* PAGE_SHIFT determines the page size */
+ #define PAGE_SHIFT 12
+-#ifdef __ASSEMBLY__
+-#define PAGE_SIZE (1 << PAGE_SHIFT)
+-#else
+-#define PAGE_SIZE (1UL << PAGE_SHIFT)
+-#endif
++#define PAGE_SIZE (_AC(1, UL) << PAGE_SHIFT)
+ #define PAGE_MASK (~(PAGE_SIZE-1))
+ #define PTE_MASK PAGE_MASK
+
+--- a/include/asm-avr32/pci.h
++++ b/include/asm-avr32/pci.h
+@@ -5,4 +5,6 @@
+
+ #define PCI_DMA_BUS_IS_PHYS (1)
+
++#include <asm-generic/pci-dma-compat.h>
++
+ #endif /* __ASM_AVR32_PCI_H__ */
+--- a/include/asm-avr32/pgalloc.h
++++ b/include/asm-avr32/pgalloc.h
+@@ -8,65 +8,79 @@
+ #ifndef __ASM_AVR32_PGALLOC_H
+ #define __ASM_AVR32_PGALLOC_H
+
+-#include <asm/processor.h>
+-#include <linux/threads.h>
+-#include <linux/slab.h>
+-#include <linux/mm.h>
++#include <linux/quicklist.h>
++#include <asm/page.h>
++#include <asm/pgtable.h>
+
+-#define pmd_populate_kernel(mm, pmd, pte) \
+- set_pmd(pmd, __pmd(_PAGE_TABLE + __pa(pte)))
++#define QUICK_PGD 0 /* Preserve kernel mappings over free */
++#define QUICK_PT 1 /* Zero on free */
+
+-static __inline__ void pmd_populate(struct mm_struct *mm, pmd_t *pmd,
++static inline void pmd_populate_kernel(struct mm_struct *mm,
++ pmd_t *pmd, pte_t *pte)
+{
-+ unsigned int space;
++ set_pmd(pmd, __pmd((unsigned long)pte));
++}
+
-+ space = ((dac->dma.tail - dac->dma.head - 1)
-+ & ((DMA_BUFFER_SIZE / 4) - 1));
-+ return space;
++static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd,
+ pgtable_t pte)
+ {
+- set_pmd(pmd, __pmd(_PAGE_TABLE + page_to_phys(pte)));
++ set_pmd(pmd, __pmd((unsigned long)page_address(pte)));
+ }
+ #define pmd_pgtable(pmd) pmd_page(pmd)
+
++static inline void pgd_ctor(void *x)
++{
++ pgd_t *pgd = x;
++
++ memcpy(pgd + USER_PTRS_PER_PGD,
++ swapper_pg_dir + USER_PTRS_PER_PGD,
++ (PTRS_PER_PGD - USER_PTRS_PER_PGD) * sizeof(pgd_t));
+}
+
-+static void abdac_update_dma_tail(struct at32_dac *dac)
+ /*
+ * Allocate and free page tables
+ */
+-static __inline__ pgd_t *pgd_alloc(struct mm_struct *mm)
++static inline pgd_t *pgd_alloc(struct mm_struct *mm)
+ {
+- return kcalloc(USER_PTRS_PER_PGD, sizeof(pgd_t), GFP_KERNEL);
++ return quicklist_alloc(QUICK_PGD, GFP_KERNEL | __GFP_REPEAT, pgd_ctor);
+ }
+
+ static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd)
+ {
+- kfree(pgd);
++ quicklist_free(QUICK_PGD, NULL, pgd);
+ }
+
+ static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm,
+ unsigned long address)
+ {
+- pte_t *pte;
+-
+- pte = (pte_t *)get_zeroed_page(GFP_KERNEL | __GFP_REPEAT);
+-
+- return pte;
++ return quicklist_alloc(QUICK_PT, GFP_KERNEL | __GFP_REPEAT, NULL);
+ }
+
+-static inline struct page *pte_alloc_one(struct mm_struct *mm,
++static inline pgtable_t pte_alloc_one(struct mm_struct *mm,
+ unsigned long address)
+ {
+- struct page *pte;
++ struct page *page;
++ void *pg;
+
+- pte = alloc_page(GFP_KERNEL | __GFP_REPEAT | __GFP_ZERO);
+- if (!pte)
++ pg = quicklist_alloc(QUICK_PT, GFP_KERNEL | __GFP_REPEAT, NULL);
++ if (!pg)
+ return NULL;
+- pgtable_page_ctor(pte);
+- return pte;
++
++ page = virt_to_page(pg);
++ pgtable_page_ctor(page);
++
++ return page;
+ }
+
+ static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
+ {
+- free_page((unsigned long)pte);
++ quicklist_free(QUICK_PT, NULL, pte);
+ }
+
+ static inline void pte_free(struct mm_struct *mm, pgtable_t pte)
+ {
+ pgtable_page_dtor(pte);
+- __free_page(pte);
++ quicklist_free_page(QUICK_PT, NULL, pte);
+ }
+
+ #define __pte_free_tlb(tlb,pte) \
+@@ -75,6 +89,10 @@ do { \
+ tlb_remove_page((tlb), pte); \
+ } while (0)
+
+-#define check_pgt_cache() do { } while(0)
++static inline void check_pgt_cache(void)
+{
-+ dma_addr_t dma_addr;
-+ unsigned int new_tail;
++ quicklist_trim(QUICK_PGD, NULL, 25, 16);
++ quicklist_trim(QUICK_PT, NULL, 25, 16);
++}
+
+ #endif /* __ASM_AVR32_PGALLOC_H */
+--- a/include/asm-avr32/pgtable.h
++++ b/include/asm-avr32/pgtable.h
+@@ -129,13 +129,6 @@ extern struct page *empty_zero_page;
+
+ #define _PAGE_FLAGS_CACHE_MASK (_PAGE_CACHABLE | _PAGE_BUFFER | _PAGE_WT)
+
+-/* TODO: Check for saneness */
+-/* User-mode page table flags (to be set in a pgd or pmd entry) */
+-#define _PAGE_TABLE (_PAGE_PRESENT | _PAGE_TYPE_SMALL | _PAGE_RW \
+- | _PAGE_USER | _PAGE_ACCESSED | _PAGE_DIRTY)
+-/* Kernel-mode page table flags */
+-#define _KERNPG_TABLE (_PAGE_PRESENT | _PAGE_TYPE_SMALL | _PAGE_RW \
+- | _PAGE_ACCESSED | _PAGE_DIRTY)
+ /* Flags that may be modified by software */
+ #define _PAGE_CHG_MASK (PTE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY \
+ | _PAGE_FLAGS_CACHE_MASK)
+@@ -254,10 +247,14 @@ static inline pte_t pte_mkyoung(pte_t pt
+ }
+
+ #define pmd_none(x) (!pmd_val(x))
+-#define pmd_present(x) (pmd_val(x) & _PAGE_PRESENT)
+-#define pmd_clear(xp) do { set_pmd(xp, __pmd(0)); } while (0)
+-#define pmd_bad(x) ((pmd_val(x) & (~PAGE_MASK & ~_PAGE_USER)) \
+- != _KERNPG_TABLE)
++#define pmd_present(x) (pmd_val(x))
+
-+ if (dac->playing) {
-+ dma_addr = dma_get_current_pos(dac->req.req.dmac,
-+ dac->req.req.channel);
-+ new_tail = (dma_addr - dac->req.buffer_start) / 4;
-+ if (new_tail >= dac->dma.head
-+ && (dac->dma.tail < dac->dma.head
-+ || dac->dma.tail > new_tail))
-+ dev_notice(&dac->pdev->dev, "DMA underrun detected!\n");
-+ dac->dma.tail = new_tail;
-+ dev_dbg(&dac->pdev->dev, "update tail: 0x%x - 0x%x = %u\n",
-+ dma_addr, dac->req.buffer_start, dac->dma.tail);
-+ }
++static inline void pmd_clear(pmd_t *pmdp)
++{
++ set_pmd(pmdp, __pmd(0));
+}
+
-+static int abdac_start(struct at32_dac *dac)
-+{
-+ int ret;
++#define pmd_bad(x) (pmd_val(x) & ~PAGE_MASK)
+
+ /*
+ * Permanent address of a page. We don't support highmem, so this is
+@@ -295,19 +292,16 @@ static inline pte_t pte_modify(pte_t pte
+
+ #define page_pte(page) page_pte_prot(page, __pgprot(0))
+
+-#define pmd_page_vaddr(pmd) \
+- ((unsigned long) __va(pmd_val(pmd) & PAGE_MASK))
+-
+-#define pmd_page(pmd) (phys_to_page(pmd_val(pmd)))
++#define pmd_page_vaddr(pmd) pmd_val(pmd)
++#define pmd_page(pmd) (virt_to_page(pmd_val(pmd)))
+
+ /* to find an entry in a page-table-directory. */
+-#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1))
+-#define pgd_offset(mm, address) ((mm)->pgd+pgd_index(address))
+-#define pgd_offset_current(address) \
+- ((pgd_t *)__mfsr(SYSREG_PTBR) + pgd_index(address))
++#define pgd_index(address) (((address) >> PGDIR_SHIFT) \
++ & (PTRS_PER_PGD - 1))
++#define pgd_offset(mm, address) ((mm)->pgd + pgd_index(address))
+
+ /* to find an entry in a kernel page-table-directory */
+-#define pgd_offset_k(address) pgd_offset(&init_mm, address)
++#define pgd_offset_k(address) pgd_offset(&init_mm, address)
+
+ /* Find an entry in the third-level page table.. */
+ #define pte_index(address) \
+--- /dev/null
++++ b/include/asm-avr32/serial.h
+@@ -0,0 +1,13 @@
++#ifndef _ASM_SERIAL_H
++#define _ASM_SERIAL_H
++
++/*
++ * This assumes you have a 1.8432 MHz clock for your UART.
++ *
++ * It'd be nice if someone built a serial card with a 24.576 MHz
++ * clock, since the 16550A is capable of handling a top speed of 1.5
++ * megabits/second; but this requires the faster clock.
++ */
++#define BASE_BAUD (1843200 / 16)
++
++#endif /* _ASM_SERIAL_H */
+--- a/include/asm-avr32/thread_info.h
++++ b/include/asm-avr32/thread_info.h
+@@ -88,6 +88,7 @@ static inline struct thread_info *curren
+ #define TIF_MEMDIE 6
+ #define TIF_RESTORE_SIGMASK 7 /* restore signal mask in do_signal */
+ #define TIF_CPU_GOING_TO_SLEEP 8 /* CPU is entering sleep 0 mode */
++#define TIF_FREEZE 29
+ #define TIF_DEBUG 30 /* debugging enabled */
+ #define TIF_USERSPACE 31 /* true if FS sets userspace */
+
+--- a/include/asm-avr32/tlbflush.h
++++ b/include/asm-avr32/tlbflush.h
+@@ -26,7 +26,6 @@ extern void flush_tlb_mm(struct mm_struc
+ extern void flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
+ unsigned long end);
+ extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long page);
+-extern void __flush_tlb_page(unsigned long asid, unsigned long page);
+
+ extern void flush_tlb_kernel_range(unsigned long start, unsigned long end);
+
+--- /dev/null
++++ b/include/asm-avr32/xor.h
+@@ -0,0 +1,6 @@
++#ifndef _ASM_XOR_H
++#define _ASM_XOR_H
++
++#include <asm-generic/xor.h>
++
++#endif
+--- /dev/null
++++ b/include/linux/atmel_tc.h
+@@ -0,0 +1,252 @@
++/*
++ * Timer/Counter Unit (TC) registers.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++#ifndef ATMEL_TC_H
++#define ATMEL_TC_H
++
++#include <linux/compiler.h>
++#include <linux/list.h>
++
++/*
++ * Many 32-bit Atmel SOCs include one or more TC blocks, each of which holds
++ * three general-purpose 16-bit timers. These timers share one register bank.
++ * Depending on the SOC, each timer may have its own clock and IRQ, or those
++ * may be shared by the whole TC block.
++ *
++ * These TC blocks may have up to nine external pins: TCLK0..2 signals for
++ * clocks or clock gates, and per-timer TIOA and TIOB signals used for PWM
++ * or triggering. Those pins need to be set up for use with the TC block,
++ * else they will be used as GPIOs or for a different controller.
++ *
++ * Although we expect each TC block to have a platform_device node, those
++ * nodes are not what drivers bind to. Instead, they ask for a specific
++ * TC block, by number ... which is a common approach on systems with many
++ * timers. Then they use clk_get() and platform_get_irq() to get clock and
++ * IRQ resources.
++ */
++
++struct clk;
+
-+ if (dac->playing)
-+ return 0;
++/**
++ * struct atmel_tc - information about a Timer/Counter Block
++ * @pdev: physical device
++ * @iomem: resource associated with the I/O register
++ * @regs: mapping through which the I/O registers can be accessed
++ * @irq: irq for each of the three channels
++ * @clk: internal clock source for each of the three channels
++ * @node: list node, for tclib internal use
++ *
++ * On some platforms, each TC channel has its own clocks and IRQs,
++ * while on others, all TC channels share the same clock and IRQ.
++ * Drivers should clk_enable() all the clocks they need even though
++ * all the entries in @clk may point to the same physical clock.
++ * Likewise, drivers should request irqs independently for each
++ * channel, but they must use IRQF_SHARED in case some of the entries
++ * in @irq are actually the same IRQ.
++ */
++struct atmel_tc {
++ struct platform_device *pdev;
++ struct resource *iomem;
++ void __iomem *regs;
++ int irq[3];
++ struct clk *clk[3];
++ struct list_head node;
++};
+
-+ memset(dac->dma.buf, 0, DMA_BUFFER_SIZE);
++extern struct atmel_tc *atmel_tc_alloc(unsigned block, const char *name);
++extern void atmel_tc_free(struct atmel_tc *tc);
+
-+ clk_enable(dac->sample_clk);
++/* platform-specific ATMEL_TC_TIMER_CLOCKx divisors (0 means 32KiHz) */
++extern const u8 atmel_tc_divisors[5];
+
-+ ret = dma_prepare_request_cyclic(dac->req.req.dmac, &dac->req);
-+ if (ret)
-+ goto out_stop_clock;
+
-+ dev_dbg(&dac->pdev->dev, "starting DMA...\n");
-+ ret = dma_start_request(dac->req.req.dmac, dac->req.req.channel);
-+ if (ret)
-+ goto out_stop_request;
++/*
++ * Two registers have block-wide controls. These are: configuring the three
++ * "external" clocks (or event sources) used by the timer channels; and
++ * synchronizing the timers by resetting them all at once.
++ *
++ * "External" can mean "external to chip" using the TCLK0, TCLK1, or TCLK2
++ * signals. Or, it can mean "external to timer", using the TIOA output from
++ * one of the other two timers that's being run in waveform mode.
++ */
+
-+ dac_writel(dac, CTRL, DAC_BIT(EN));
-+ dac->playing = 1;
++#define ATMEL_TC_BCR 0xc0 /* TC Block Control Register */
++#define ATMEL_TC_SYNC (1 << 0) /* synchronize timers */
++
++#define ATMEL_TC_BMR 0xc4 /* TC Block Mode Register */
++#define ATMEL_TC_TC0XC0S (3 << 0) /* external clock 0 source */
++#define ATMEL_TC_TC0XC0S_TCLK0 (0 << 0)
++#define ATMEL_TC_TC0XC0S_NONE (1 << 0)
++#define ATMEL_TC_TC0XC0S_TIOA1 (2 << 0)
++#define ATMEL_TC_TC0XC0S_TIOA2 (3 << 0)
++#define ATMEL_TC_TC1XC1S (3 << 2) /* external clock 1 source */
++#define ATMEL_TC_TC1XC1S_TCLK1 (0 << 2)
++#define ATMEL_TC_TC1XC1S_NONE (1 << 2)
++#define ATMEL_TC_TC1XC1S_TIOA0 (2 << 2)
++#define ATMEL_TC_TC1XC1S_TIOA2 (3 << 2)
++#define ATMEL_TC_TC2XC2S (3 << 4) /* external clock 2 source */
++#define ATMEL_TC_TC2XC2S_TCLK2 (0 << 4)
++#define ATMEL_TC_TC2XC2S_NONE (1 << 4)
++#define ATMEL_TC_TC2XC2S_TIOA0 (2 << 4)
++#define ATMEL_TC_TC2XC2S_TIOA1 (3 << 4)
+
-+ return 0;
+
-+out_stop_request:
-+ dma_stop_request(dac->req.req.dmac,
-+ dac->req.req.channel);
-+out_stop_clock:
-+ clk_disable(dac->sample_clk);
-+ return ret;
-+}
++/*
++ * Each TC block has three "channels", each with one counter and controls.
++ *
++ * Note that the semantics of ATMEL_TC_TIMER_CLOCKx (input clock selection
++ * when it's not "external") is silicon-specific. AT91 platforms use one
++ * set of definitions; AVR32 platforms use a different set. Don't hard-wire
++ * such knowledge into your code, use the global "atmel_tc_divisors" ...
++ * where index N is the divisor for clock N+1, else zero to indicate it uses
++ * the 32 KiHz clock.
++ *
++ * The timers can be chained in various ways, and operated in "waveform"
++ * generation mode (including PWM) or "capture" mode (to time events). In
++ * both modes, behavior can be configured in many ways.
++ *
++ * Each timer has two I/O pins, TIOA and TIOB. Waveform mode uses TIOA as a
++ * PWM output, and TIOB as either another PWM or as a trigger. Capture mode
++ * uses them only as inputs.
++ */
++#define ATMEL_TC_CHAN(idx) ((idx)*0x40)
++#define ATMEL_TC_REG(idx, reg) (ATMEL_TC_CHAN(idx) + ATMEL_TC_ ## reg)
++
++#define ATMEL_TC_CCR 0x00 /* Channel Control Register */
++#define ATMEL_TC_CLKEN (1 << 0) /* clock enable */
++#define ATMEL_TC_CLKDIS (1 << 1) /* clock disable */
++#define ATMEL_TC_SWTRG (1 << 2) /* software trigger */
++
++#define ATMEL_TC_CMR 0x04 /* Channel Mode Register */
++
++/* Both modes share some CMR bits */
++#define ATMEL_TC_TCCLKS (7 << 0) /* clock source */
++#define ATMEL_TC_TIMER_CLOCK1 (0 << 0)
++#define ATMEL_TC_TIMER_CLOCK2 (1 << 0)
++#define ATMEL_TC_TIMER_CLOCK3 (2 << 0)
++#define ATMEL_TC_TIMER_CLOCK4 (3 << 0)
++#define ATMEL_TC_TIMER_CLOCK5 (4 << 0)
++#define ATMEL_TC_XC0 (5 << 0)
++#define ATMEL_TC_XC1 (6 << 0)
++#define ATMEL_TC_XC2 (7 << 0)
++#define ATMEL_TC_CLKI (1 << 3) /* clock invert */
++#define ATMEL_TC_BURST (3 << 4) /* clock gating */
++#define ATMEL_TC_GATE_NONE (0 << 4)
++#define ATMEL_TC_GATE_XC0 (1 << 4)
++#define ATMEL_TC_GATE_XC1 (2 << 4)
++#define ATMEL_TC_GATE_XC2 (3 << 4)
++#define ATMEL_TC_WAVE (1 << 15) /* true = Waveform mode */
++
++/* CAPTURE mode CMR bits */
++#define ATMEL_TC_LDBSTOP (1 << 6) /* counter stops on RB load */
++#define ATMEL_TC_LDBDIS (1 << 7) /* counter disable on RB load */
++#define ATMEL_TC_ETRGEDG (3 << 8) /* external trigger edge */
++#define ATMEL_TC_ETRGEDG_NONE (0 << 8)
++#define ATMEL_TC_ETRGEDG_RISING (1 << 8)
++#define ATMEL_TC_ETRGEDG_FALLING (2 << 8)
++#define ATMEL_TC_ETRGEDG_BOTH (3 << 8)
++#define ATMEL_TC_ABETRG (1 << 10) /* external trigger is TIOA? */
++#define ATMEL_TC_CPCTRG (1 << 14) /* RC compare trigger enable */
++#define ATMEL_TC_LDRA (3 << 16) /* RA loading edge (of TIOA) */
++#define ATMEL_TC_LDRA_NONE (0 << 16)
++#define ATMEL_TC_LDRA_RISING (1 << 16)
++#define ATMEL_TC_LDRA_FALLING (2 << 16)
++#define ATMEL_TC_LDRA_BOTH (3 << 16)
++#define ATMEL_TC_LDRB (3 << 18) /* RB loading edge (of TIOA) */
++#define ATMEL_TC_LDRB_NONE (0 << 18)
++#define ATMEL_TC_LDRB_RISING (1 << 18)
++#define ATMEL_TC_LDRB_FALLING (2 << 18)
++#define ATMEL_TC_LDRB_BOTH (3 << 18)
++
++/* WAVEFORM mode CMR bits */
++#define ATMEL_TC_CPCSTOP (1 << 6) /* RC compare stops counter */
++#define ATMEL_TC_CPCDIS (1 << 7) /* RC compare disables counter */
++#define ATMEL_TC_EEVTEDG (3 << 8) /* external event edge */
++#define ATMEL_TC_EEVTEDG_NONE (0 << 8)
++#define ATMEL_TC_EEVTEDG_RISING (1 << 8)
++#define ATMEL_TC_EEVTEDG_FALLING (2 << 8)
++#define ATMEL_TC_EEVTEDG_BOTH (3 << 8)
++#define ATMEL_TC_EEVT (3 << 10) /* external event source */
++#define ATMEL_TC_EEVT_TIOB (0 << 10)
++#define ATMEL_TC_EEVT_XC0 (1 << 10)
++#define ATMEL_TC_EEVT_XC1 (2 << 10)
++#define ATMEL_TC_EEVT_XC2 (3 << 10)
++#define ATMEL_TC_ENETRG (1 << 12) /* external event is trigger */
++#define ATMEL_TC_WAVESEL (3 << 13) /* waveform type */
++#define ATMEL_TC_WAVESEL_UP (0 << 13)
++#define ATMEL_TC_WAVESEL_UPDOWN (1 << 13)
++#define ATMEL_TC_WAVESEL_UP_AUTO (2 << 13)
++#define ATMEL_TC_WAVESEL_UPDOWN_AUTO (3 << 13)
++#define ATMEL_TC_ACPA (3 << 16) /* RA compare changes TIOA */
++#define ATMEL_TC_ACPA_NONE (0 << 16)
++#define ATMEL_TC_ACPA_SET (1 << 16)
++#define ATMEL_TC_ACPA_CLEAR (2 << 16)
++#define ATMEL_TC_ACPA_TOGGLE (3 << 16)
++#define ATMEL_TC_ACPC (3 << 18) /* RC compare changes TIOA */
++#define ATMEL_TC_ACPC_NONE (0 << 18)
++#define ATMEL_TC_ACPC_SET (1 << 18)
++#define ATMEL_TC_ACPC_CLEAR (2 << 18)
++#define ATMEL_TC_ACPC_TOGGLE (3 << 18)
++#define ATMEL_TC_AEEVT (3 << 20) /* external event changes TIOA */
++#define ATMEL_TC_AEEVT_NONE (0 << 20)
++#define ATMEL_TC_AEEVT_SET (1 << 20)
++#define ATMEL_TC_AEEVT_CLEAR (2 << 20)
++#define ATMEL_TC_AEEVT_TOGGLE (3 << 20)
++#define ATMEL_TC_ASWTRG (3 << 22) /* software trigger changes TIOA */
++#define ATMEL_TC_ASWTRG_NONE (0 << 22)
++#define ATMEL_TC_ASWTRG_SET (1 << 22)
++#define ATMEL_TC_ASWTRG_CLEAR (2 << 22)
++#define ATMEL_TC_ASWTRG_TOGGLE (3 << 22)
++#define ATMEL_TC_BCPB (3 << 24) /* RB compare changes TIOB */
++#define ATMEL_TC_BCPB_NONE (0 << 24)
++#define ATMEL_TC_BCPB_SET (1 << 24)
++#define ATMEL_TC_BCPB_CLEAR (2 << 24)
++#define ATMEL_TC_BCPB_TOGGLE (3 << 24)
++#define ATMEL_TC_BCPC (3 << 26) /* RC compare changes TIOB */
++#define ATMEL_TC_BCPC_NONE (0 << 26)
++#define ATMEL_TC_BCPC_SET (1 << 26)
++#define ATMEL_TC_BCPC_CLEAR (2 << 26)
++#define ATMEL_TC_BCPC_TOGGLE (3 << 26)
++#define ATMEL_TC_BEEVT (3 << 28) /* external event changes TIOB */
++#define ATMEL_TC_BEEVT_NONE (0 << 28)
++#define ATMEL_TC_BEEVT_SET (1 << 28)
++#define ATMEL_TC_BEEVT_CLEAR (2 << 28)
++#define ATMEL_TC_BEEVT_TOGGLE (3 << 28)
++#define ATMEL_TC_BSWTRG (3 << 30) /* software trigger changes TIOB */
++#define ATMEL_TC_BSWTRG_NONE (0 << 30)
++#define ATMEL_TC_BSWTRG_SET (1 << 30)
++#define ATMEL_TC_BSWTRG_CLEAR (2 << 30)
++#define ATMEL_TC_BSWTRG_TOGGLE (3 << 30)
++
++#define ATMEL_TC_CV 0x10 /* counter Value */
++#define ATMEL_TC_RA 0x14 /* register A */
++#define ATMEL_TC_RB 0x18 /* register B */
++#define ATMEL_TC_RC 0x1c /* register C */
++
++#define ATMEL_TC_SR 0x20 /* status (read-only) */
++/* Status-only flags */
++#define ATMEL_TC_CLKSTA (1 << 16) /* clock enabled */
++#define ATMEL_TC_MTIOA (1 << 17) /* TIOA mirror */
++#define ATMEL_TC_MTIOB (1 << 18) /* TIOB mirror */
++
++#define ATMEL_TC_IER 0x24 /* interrupt enable (write-only) */
++#define ATMEL_TC_IDR 0x28 /* interrupt disable (write-only) */
++#define ATMEL_TC_IMR 0x2c /* interrupt mask (read-only) */
++
++/* Status and IRQ flags */
++#define ATMEL_TC_COVFS (1 << 0) /* counter overflow */
++#define ATMEL_TC_LOVRS (1 << 1) /* load overrun */
++#define ATMEL_TC_CPAS (1 << 2) /* RA compare */
++#define ATMEL_TC_CPBS (1 << 3) /* RB compare */
++#define ATMEL_TC_CPCS (1 << 4) /* RC compare */
++#define ATMEL_TC_LDRAS (1 << 5) /* RA loading */
++#define ATMEL_TC_LDRBS (1 << 6) /* RB loading */
++#define ATMEL_TC_ETRGS (1 << 7) /* external trigger */
+
-+static int abdac_stop(struct at32_dac *dac)
-+{
-+ if (dac->playing) {
-+ dma_stop_request(dac->req.req.dmac, dac->req.req.channel);
-+ dac_writel(dac, DATA, 0);
-+ dac_writel(dac, CTRL, 0);
-+ dac->playing = 0;
-+ clk_disable(dac->sample_clk);
-+ }
++#endif
+--- a/include/linux/fs.h
++++ b/include/linux/fs.h
+@@ -1692,6 +1692,8 @@ static inline void invalidate_remote_ino
+ extern int invalidate_inode_pages2(struct address_space *mapping);
+ extern int invalidate_inode_pages2_range(struct address_space *mapping,
+ pgoff_t start, pgoff_t end);
++extern void generic_sync_sb_inodes(struct super_block *sb,
++ struct writeback_control *wbc);
+ extern int write_inode_now(struct inode *, int);
+ extern int filemap_fdatawrite(struct address_space *);
+ extern int filemap_flush(struct address_space *);
+--- a/include/linux/serial_core.h
++++ b/include/linux/serial_core.h
+@@ -188,6 +188,7 @@ struct uart_ops {
+ void (*break_ctl)(struct uart_port *, int ctl);
+ int (*startup)(struct uart_port *);
+ void (*shutdown)(struct uart_port *);
++ void (*flush_buffer)(struct uart_port *);
+ void (*set_termios)(struct uart_port *, struct ktermios *new,
+ struct ktermios *old);
+ void (*pm)(struct uart_port *, unsigned int state,
+--- /dev/null
++++ b/include/linux/usb/atmel_usba_udc.h
+@@ -0,0 +1,22 @@
++/*
++ * Platform data definitions for Atmel USBA gadget driver.
++ */
++#ifndef __LINUX_USB_USBA_H
++#define __LINUX_USB_USBA_H
++
++struct usba_ep_data {
++ char *name;
++ int index;
++ int fifo_size;
++ int nr_banks;
++ int can_dma;
++ int can_isoc;
++};
+
-+ return 0;
-+}
++struct usba_platform_data {
++ int vbus_pin;
++ int num_ep;
++ struct usba_ep_data ep[0];
++};
+
-+static int abdac_dma_prepare(struct at32_dac *dac)
-+{
-+ dac->dma.buf = dma_alloc_coherent(&dac->pdev->dev, DMA_BUFFER_SIZE,
-+ &dac->req.buffer_start, GFP_KERNEL);
-+ if (!dac->dma.buf)
-+ return -ENOMEM;
++#endif /* __LINUX_USB_USBA_H */
+--- a/mm/Kconfig
++++ b/mm/Kconfig
+@@ -187,7 +187,7 @@ config BOUNCE
+ config NR_QUICK
+ int
+ depends on QUICKLIST
+- default "2" if SUPERH
++ default "2" if SUPERH || AVR32
+ default "1"
+
+ config VIRT_TO_BUS
+--- a/sound/Kconfig
++++ b/sound/Kconfig
+@@ -63,6 +63,8 @@ source "sound/aoa/Kconfig"
+
+ source "sound/arm/Kconfig"
+
++source "sound/avr32/Kconfig"
+
-+ dac->dma.head = dac->dma.tail = 0;
-+ dac->req.periods = DMA_BUFFER_SIZE / DMA_PERIOD_SIZE;
-+ dac->req.buffer_size = DMA_BUFFER_SIZE;
+ if SPI
+ source "sound/spi/Kconfig"
+ endif
+--- a/sound/Makefile
++++ b/sound/Makefile
+@@ -6,7 +6,7 @@ obj-$(CONFIG_SOUND_PRIME) += sound_firmw
+ obj-$(CONFIG_SOUND_PRIME) += oss/
+ obj-$(CONFIG_DMASOUND) += oss/
+ obj-$(CONFIG_SND) += core/ i2c/ drivers/ isa/ pci/ ppc/ arm/ sh/ synth/ usb/ \
+- sparc/ spi/ parisc/ pcmcia/ mips/ soc/
++ sparc/ spi/ parisc/ pcmcia/ mips/ soc/ avr32/
+ obj-$(CONFIG_SND_AOA) += aoa/
+
+ # This one must be compilable even if sound is configured out
+--- /dev/null
++++ b/sound/avr32/Kconfig
+@@ -0,0 +1,11 @@
++menu "AVR32 devices"
++ depends on SND != n && AVR32
+
-+ return 0;
-+}
++config SND_ATMEL_AC97
++ tristate "Atmel AC97 Controller Driver"
++ select SND_PCM
++ select SND_AC97_CODEC
++ help
++ ALSA sound driver for the Atmel AC97 controller.
+
-+static void abdac_dma_cleanup(struct at32_dac *dac)
-+{
-+ if (dac->dma.buf)
-+ dma_free_coherent(&dac->pdev->dev, DMA_BUFFER_SIZE,
-+ dac->dma.buf, dac->req.buffer_start);
-+ dac->dma.buf = NULL;
-+}
++endmenu
+--- /dev/null
++++ b/sound/avr32/Makefile
+@@ -0,0 +1,3 @@
++snd-atmel-ac97-objs := ac97c.o
+
-+static void abdac_dma_block_complete(struct dma_request *req)
-+{
-+ struct dma_request_cyclic *creq = to_dma_request_cyclic(req);
-+ struct at32_dac *dac = container_of(creq, struct at32_dac, req);
++obj-$(CONFIG_SND_ATMEL_AC97) += snd-atmel-ac97.o
+--- /dev/null
++++ b/sound/avr32/ac97c.c
+@@ -0,0 +1,951 @@
++/*
++ * Driver for the Atmel AC97 controller
++ *
++ * Copyright (C) 2005-2007 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published by
++ * the Free Software Foundation.
++ */
++#include <linux/clk.h>
++#include <linux/delay.h>
++#include <linux/dma-mapping.h>
++#include <linux/gpio.h>
++#include <linux/init.h>
++#include <linux/interrupt.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/mutex.h>
++#include <linux/io.h>
+
-+ wake_up(&dac->write_wait);
-+}
++#include <sound/core.h>
++#include <sound/initval.h>
++#include <sound/pcm.h>
++#include <sound/pcm_params.h>
++#include <sound/ac97_codec.h>
++#include <sound/memalloc.h>
+
-+static void abdac_dma_error(struct dma_request *req)
-+{
-+ struct dma_request_cyclic *creq = to_dma_request_cyclic(req);
-+ struct at32_dac *dac = container_of(creq, struct at32_dac, req);
++#include <asm/arch/board.h>
++#include <asm/dma-controller.h>
+
-+ dev_err(&dac->pdev->dev, "DMA error\n");
-+}
++#include "ac97c.h"
+
-+static irqreturn_t abdac_interrupt(int irq, void *dev_id)
-+{
-+ struct at32_dac *dac = dev_id;
-+ u32 status;
++/* Serialize access to opened */
++static DEFINE_MUTEX(opened_mutex);
+
-+ status = dac_readl(dac, INT_STATUS);
-+ if (status & DAC_BIT(UNDERRUN)) {
-+ dev_err(&dac->pdev->dev, "Underrun detected!\n");
-+ dac_writel(dac, INT_CLR, DAC_BIT(UNDERRUN));
-+ } else {
-+ dev_err(&dac->pdev->dev, "Spurious interrupt (status=0x%x)\n",
-+ status);
-+ dac_writel(dac, INT_CLR, status);
-+ }
++struct atmel_ac97_dma_info {
++ struct dma_request_cyclic req_tx;
++ struct dma_request_cyclic req_rx;
++ unsigned short rx_periph_id;
++ unsigned short tx_periph_id;
++ unsigned short controller;
++};
+
-+ return IRQ_HANDLED;
-+}
++struct atmel_ac97 {
++ /* Serialize access to opened */
++ spinlock_t lock;
++ void __iomem *regs;
++ struct snd_pcm_substream *playback_substream;
++ struct snd_pcm_substream *capture_substream;
++ struct snd_card *card;
++ struct snd_pcm *pcm;
++ struct snd_ac97 *ac97;
++ struct snd_ac97_bus *ac97_bus;
++ int opened;
++ int period;
++ int reset_pin;
++ u64 cur_format;
++ unsigned int cur_rate;
++ struct clk *mck;
++ struct platform_device *pdev;
++ struct atmel_ac97_dma_info dma;
++};
+
-+static ssize_t trans_s16be(struct at32_dac *dac, const char __user *ubuf,
-+ size_t ucount)
-+{
-+ ssize_t ret;
++#define get_chip(card) ((struct atmel_ac97 *)(card)->private_data)
+
-+ if (dac->dsp_settings.channels == 2) {
-+ const u32 __user *up = (const u32 __user *)ubuf;
-+ u32 sample;
++#define ac97c_writel(chip, reg, val) \
++ __raw_writel((val), (chip)->regs + AC97C_##reg)
++#define ac97c_readl(chip, reg) \
++ __raw_readl((chip)->regs + AC97C_##reg)
+
-+ for (ret = 0; ret < (ssize_t)(ucount - 3); ret += 4) {
-+ if (!abdac_dma_space(dac))
-+ break;
++/*
++ * PCM part
++ */
++static struct snd_pcm_hardware snd_atmel_ac97_playback_hw = {
++ .info = (SNDRV_PCM_INFO_INTERLEAVED
++ | SNDRV_PCM_INFO_MMAP
++ | SNDRV_PCM_INFO_MMAP_VALID
++ | SNDRV_PCM_INFO_BLOCK_TRANSFER
++ | SNDRV_PCM_INFO_JOINT_DUPLEX),
++ .formats = (SNDRV_PCM_FMTBIT_S16_BE
++ | SNDRV_PCM_FMTBIT_S16_LE),
++ .rates = (SNDRV_PCM_RATE_CONTINUOUS),
++ .rate_min = 4000,
++ .rate_max = 48000,
++ .channels_min = 1,
++ .channels_max = 6,
++ .buffer_bytes_max = 64*1024,
++ .period_bytes_min = 512,
++ .period_bytes_max = 4095,
++ .periods_min = 8,
++ .periods_max = 1024,
++};
+
-+ if (unlikely(__get_user(sample, up++))) {
-+ if (ret == 0)
-+ ret = -EFAULT;
-+ break;
-+ }
-+ dac->dma.buf[abdac_get_head(dac)] = sample;
-+ dac->dma.head++;
-+ }
-+ } else {
-+ const u16 __user *up = (const u16 __user *)ubuf;
-+ u16 sample;
++static struct snd_pcm_hardware snd_atmel_ac97_capture_hw = {
++ .info = (SNDRV_PCM_INFO_INTERLEAVED
++ | SNDRV_PCM_INFO_MMAP
++ | SNDRV_PCM_INFO_MMAP_VALID
++ | SNDRV_PCM_INFO_BLOCK_TRANSFER
++ | SNDRV_PCM_INFO_JOINT_DUPLEX),
++ .formats = (SNDRV_PCM_FMTBIT_S16_BE
++ | SNDRV_PCM_FMTBIT_S16_LE),
++ .rates = (SNDRV_PCM_RATE_CONTINUOUS),
++ .rate_min = 4000,
++ .rate_max = 48000,
++ .channels_min = 1,
++ .channels_max = 2,
++ .buffer_bytes_max = 64*1024,
++ .period_bytes_min = 512,
++ .period_bytes_max = 4095,
++ .periods_min = 8,
++ .periods_max = 1024,
++};
+
-+ for (ret = 0; ret < (ssize_t)(ucount - 1); ret += 2) {
-+ if (!abdac_dma_space(dac))
-+ break;
++/*
++ * PCM functions
++ */
++static int
++snd_atmel_ac97_playback_open(struct snd_pcm_substream *substream)
++{
++ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
++ struct snd_pcm_runtime *runtime = substream->runtime;
+
-+ if (unlikely(__get_user(sample, up++))) {
-+ if (ret == 0)
-+ ret = -EFAULT;
-+ break;
-+ }
-+ dac->dma.buf[abdac_get_head(dac)]
-+ = (sample << 16) | sample;
-+ dac->dma.head++;
-+ }
++ mutex_lock(&opened_mutex);
++ chip->opened++;
++ runtime->hw = snd_atmel_ac97_playback_hw;
++ if (chip->cur_rate) {
++ runtime->hw.rate_min = chip->cur_rate;
++ runtime->hw.rate_max = chip->cur_rate;
+ }
-+
-+ return ret;
++ if (chip->cur_format)
++ runtime->hw.formats = (1ULL << chip->cur_format);
++ mutex_unlock(&opened_mutex);
++ chip->playback_substream = substream;
++ chip->period = 0;
++ return 0;
+}
+
-+static ssize_t trans_s16le(struct at32_dac *dac, const char __user *ubuf,
-+ size_t ucount)
++static int
++snd_atmel_ac97_capture_open(struct snd_pcm_substream *substream)
+{
-+ ssize_t ret;
-+
-+ if (dac->dsp_settings.channels == 2) {
-+ const u32 __user *up = (const u32 __user *)ubuf;
-+ u32 sample;
-+
-+ for (ret = 0; ret < (ssize_t)(ucount - 3); ret += 4) {
-+ if (!abdac_dma_space(dac))
-+ break;
-+
-+ if (unlikely(__get_user(sample, up++))) {
-+ if (ret == 0)
-+ ret = -EFAULT;
-+ break;
-+ }
-+ /* Swap bytes in each halfword */
-+ dac->dma.buf[abdac_get_head(dac)] = swahb32(sample);
-+ dac->dma.head++;
-+ }
-+ } else {
-+ const u16 __user *up = (const u16 __user *)ubuf;
-+ u16 sample;
-+
-+ for (ret = 0; ret < (ssize_t)(ucount - 1); ret += 2) {
-+ if (!abdac_dma_space(dac))
-+ break;
++ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
++ struct snd_pcm_runtime *runtime = substream->runtime;
+
-+ if (unlikely(__get_user(sample, up++))) {
-+ if (ret == 0)
-+ ret = -EFAULT;
-+ break;
-+ }
-+ sample = swab16(sample);
-+ dac->dma.buf[abdac_get_head(dac)]
-+ = (sample << 16) | sample;
-+ dac->dma.head++;
-+ }
++ mutex_lock(&opened_mutex);
++ chip->opened++;
++ runtime->hw = snd_atmel_ac97_capture_hw;
++ if (chip->cur_rate) {
++ runtime->hw.rate_min = chip->cur_rate;
++ runtime->hw.rate_max = chip->cur_rate;
+ }
-+
-+ return ret;
++ if (chip->cur_format)
++ runtime->hw.formats = (1ULL << chip->cur_format);
++ mutex_unlock(&opened_mutex);
++ chip->capture_substream = substream;
++ chip->period = 0;
++ return 0;
+}
+
-+static ssize_t abdac_dma_translate_from_user(struct at32_dac *dac,
-+ const char __user *buffer,
-+ size_t count)
++static int snd_atmel_ac97_playback_close(struct snd_pcm_substream *substream)
+{
-+ /* At least one buffer must be available at this point */
-+ dev_dbg(&dac->pdev->dev, "copying %zu bytes from user...\n", count);
++ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
++ mutex_lock(&opened_mutex);
++ chip->opened--;
++ if (!chip->opened) {
++ chip->cur_rate = 0;
++ chip->cur_format = 0;
++ }
++ mutex_unlock(&opened_mutex);
++ return 0;
++}
+
-+ return dac->trans(dac, buffer, count);
++static int snd_atmel_ac97_capture_close(struct snd_pcm_substream *substream)
++{
++ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
++ mutex_lock(&opened_mutex);
++ chip->opened--;
++ if (!chip->opened) {
++ chip->cur_rate = 0;
++ chip->cur_format = 0;
++ }
++ mutex_unlock(&opened_mutex);
++ return 0;
+}
+
-+static int abdac_set_format(struct at32_dac *dac, int format)
++static int
++snd_atmel_ac97_playback_hw_params(struct snd_pcm_substream *substream,
++ struct snd_pcm_hw_params *hw_params)
+{
-+ unsigned int order;
++ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
++ int err;
+
-+ switch (format) {
-+ case AFMT_S16_BE:
-+ order = 1;
-+ dac->trans = trans_s16be;
-+ break;
-+ case AFMT_S16_LE:
-+ order = 1;
-+ dac->trans = trans_s16le;
-+ break;
-+ default:
-+ dev_dbg(&dac->pdev->dev, "unsupported format: %d\n", format);
-+ return -EINVAL;
-+ }
++ err = snd_pcm_lib_malloc_pages(substream,
++ params_buffer_bytes(hw_params));
++ if (err < 0)
++ return err;
+
-+ if (dac->dsp_settings.channels == 2)
-+ order++;
++ /* Set restrictions to params */
++ mutex_lock(&opened_mutex);
++ chip->cur_rate = params_rate(hw_params);
++ chip->cur_format = params_format(hw_params);
++ mutex_unlock(&opened_mutex);
+
-+ dac->dsp_settings.input_order = order;
-+ dac->dsp_settings.format = format;
+ return 0;
+}
+
-+static int abdac_set_sample_rate(struct at32_dac *dac, unsigned long rate)
++static int
++snd_atmel_ac97_capture_hw_params(struct snd_pcm_substream *substream,
++ struct snd_pcm_hw_params *hw_params)
+{
-+ unsigned long new_rate;
-+ int ret;
++ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
++ int err;
+
-+ ret = clk_set_rate(dac->sample_clk, 256 * rate);
-+ if (ret < 0)
-+ return ret;
++ err = snd_pcm_lib_malloc_pages(substream,
++ params_buffer_bytes(hw_params));
++ if (err < 0)
++ return err;
+
-+ /* TODO: mplayer seems to have a problem with this */
-+#if 0
-+ new_rate = clk_get_rate(dac->sample_clk);
-+ dac->dsp_settings.sample_rate = new_rate / 256;
-+#else
-+ dac->dsp_settings.sample_rate = rate;
-+#endif
++ /* Set restrictions to params */
++ mutex_lock(&opened_mutex);
++ chip->cur_rate = params_rate(hw_params);
++ chip->cur_format = params_format(hw_params);
++ mutex_unlock(&opened_mutex);
+
+ return 0;
+}
+
-+static ssize_t abdac_dsp_write(struct file *file,
-+ const char __user *buffer,
-+ size_t count, loff_t *ppos)
++static int snd_atmel_ac97_playback_hw_free(struct snd_pcm_substream *substream)
+{
-+ struct at32_dac *dac = file->private_data;
-+ DECLARE_WAITQUEUE(wait, current);
-+ unsigned int avail;
-+ ssize_t copied;
-+ ssize_t ret;
++ return snd_pcm_lib_free_pages(substream);
++}
+
-+ /* Avoid address space checking in the translation functions */
-+ if (!access_ok(buffer, count, VERIFY_READ))
-+ return -EFAULT;
++static int snd_atmel_ac97_capture_hw_free(struct snd_pcm_substream *substream)
++{
+
-+ down(&dac->sem);
++ return snd_pcm_lib_free_pages(substream);
++}
+
-+ if (!dac->dma.buf) {
-+ ret = abdac_dma_prepare(dac);
-+ if (ret)
-+ goto out;
++static int snd_atmel_ac97_playback_prepare(struct snd_pcm_substream *substream)
++{
++ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
++ struct platform_device *pdev = chip->pdev;
++ struct snd_pcm_runtime *runtime = substream->runtime;
++ int block_size = frames_to_bytes(runtime, runtime->period_size);
++ unsigned long word = 0;
++ unsigned long buffer_size = 0;
++
++ dma_sync_single_for_device(&pdev->dev, runtime->dma_addr,
++ block_size * 2, DMA_TO_DEVICE);
++
++ /* Assign slots to channels */
++ switch (substream->runtime->channels) {
++ case 1:
++ word |= AC97C_CH_ASSIGN(PCM_LEFT, A);
++ break;
++ case 2:
++ /* Assign Left and Right slot to Channel A */
++ word |= AC97C_CH_ASSIGN(PCM_LEFT, A)
++ | AC97C_CH_ASSIGN(PCM_RIGHT, A);
++ break;
++ default:
++ /* TODO: support more than two channels */
++ return -EINVAL;
++ break;
+ }
++ ac97c_writel(chip, OCA, word);
+
-+ add_wait_queue(&dac->write_wait, &wait);
-+ ret = 0;
-+ while (count > 0) {
-+ do {
-+ abdac_update_dma_tail(dac);
-+ avail = abdac_dma_space(dac);
-+ set_current_state(TASK_INTERRUPTIBLE);
-+ if (avail >= DMA_WRITE_THRESHOLD)
-+ break;
++ /* Configure sample format and size */
++ word = AC97C_CMR_PDCEN | AC97C_CMR_SIZE_16;
+
-+ if (file->f_flags & O_NONBLOCK) {
-+ if (!ret)
-+ ret = -EAGAIN;
-+ goto out;
-+ }
++ switch (runtime->format) {
++ case SNDRV_PCM_FORMAT_S16_LE:
++ word |= AC97C_CMR_CEM_LITTLE;
++ break;
++ case SNDRV_PCM_FORMAT_S16_BE: /* fall through */
++ default:
++ word &= ~AC97C_CMR_CEM_LITTLE;
++ break;
++ }
++
++ ac97c_writel(chip, CAMR, word);
+
-+ pr_debug("Going to wait (avail = %u, count = %zu)\n",
-+ avail, count);
++ /* Set variable rate if needed */
++ if (runtime->rate != 48000) {
++ word = ac97c_readl(chip, MR);
++ word |= AC97C_MR_VRA;
++ ac97c_writel(chip, MR, word);
++ } else {
++ /* Clear Variable Rate Bit */
++ word = ac97c_readl(chip, MR);
++ word &= ~AC97C_MR_VRA;
++ ac97c_writel(chip, MR, word);
++ }
+
-+ up(&dac->sem);
-+ schedule();
-+ if (signal_pending(current)) {
-+ if (!ret)
-+ ret = -ERESTARTSYS;
-+ goto out_nosem;
-+ }
-+ down(&dac->sem);
-+ } while (1);
++ /* Set rate */
++ snd_ac97_set_rate(chip->ac97, AC97_PCM_FRONT_DAC_RATE, runtime->rate);
+
-+ copied = abdac_dma_translate_from_user(dac, buffer, count);
-+ if (copied < 0) {
-+ if (!ret)
-+ ret = -EFAULT;
-+ goto out;
-+ }
++ buffer_size = frames_to_bytes(runtime, runtime->period_size) *
++ runtime->periods;
+
-+ abdac_start(dac);
++ chip->dma.req_tx.buffer_size = buffer_size;
++ chip->dma.req_tx.periods = runtime->periods;
+
-+ count -= copied;
-+ ret += copied;
-+ }
++ BUG_ON(chip->dma.req_tx.buffer_size !=
++ (chip->dma.req_tx.periods *
++ frames_to_bytes(runtime, runtime->period_size)));
+
-+out:
-+ up(&dac->sem);
-+out_nosem:
-+ remove_wait_queue(&dac->write_wait, &wait);
-+ set_current_state(TASK_RUNNING);
-+ return ret;
++ chip->dma.req_tx.buffer_start = runtime->dma_addr;
++ chip->dma.req_tx.data_reg = (dma_addr_t)(chip->regs + AC97C_CATHR + 2);
++ chip->dma.req_tx.periph_id = chip->dma.tx_periph_id;
++ chip->dma.req_tx.direction = DMA_DIR_MEM_TO_PERIPH;
++ chip->dma.req_tx.width = DMA_WIDTH_16BIT;
++ chip->dma.req_tx.dev_id = chip;
++
++ return 0;
+}
+
-+static int abdac_dsp_ioctl(struct inode *inode, struct file *file,
-+ unsigned int cmd, unsigned long arg)
++static int snd_atmel_ac97_capture_prepare(struct snd_pcm_substream *substream)
+{
-+ struct at32_dac *dac = file->private_data;
-+ int __user *up = (int __user *)arg;
-+ struct audio_buf_info abinfo;
-+ int val, ret;
++ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
++ struct platform_device *pdev = chip->pdev;
++ struct snd_pcm_runtime *runtime = substream->runtime;
++ int block_size = frames_to_bytes(runtime, runtime->period_size);
++ unsigned long word = 0;
++ unsigned long buffer_size = 0;
+
-+ switch (cmd) {
-+ case OSS_GETVERSION:
-+ return put_user(SOUND_VERSION, up);
++ dma_sync_single_for_device(&pdev->dev, runtime->dma_addr,
++ block_size * 2, DMA_FROM_DEVICE);
+
-+ case SNDCTL_DSP_SPEED:
-+ if (get_user(val, up))
-+ return -EFAULT;
-+ if (val >= 0) {
-+ abdac_stop(dac);
-+ ret = abdac_set_sample_rate(dac, val);
-+ if (ret)
-+ return ret;
-+ }
-+ return put_user(dac->dsp_settings.sample_rate, up);
++ /* Assign slots to channels */
++ switch (substream->runtime->channels) {
++ case 1:
++ word |= AC97C_CH_ASSIGN(PCM_LEFT, A);
++ break;
++ case 2:
++ /* Assign Left and Right slot to Channel A */
++ word |= AC97C_CH_ASSIGN(PCM_LEFT, A)
++ | AC97C_CH_ASSIGN(PCM_RIGHT, A);
++ break;
++ default:
++ /* TODO: support more than two channels */
++ return -EINVAL;
++ break;
++ }
++ ac97c_writel(chip, ICA, word);
+
-+ case SNDCTL_DSP_STEREO:
-+ if (get_user(val, up))
-+ return -EFAULT;
-+ abdac_stop(dac);
-+ if (val && dac->dsp_settings.channels == 1)
-+ dac->dsp_settings.input_order++;
-+ else if (!val && dac->dsp_settings.channels != 1)
-+ dac->dsp_settings.input_order--;
-+ dac->dsp_settings.channels = val ? 2 : 1;
-+ return 0;
++ /* Configure sample format and size */
++ word = AC97C_CMR_PDCEN | AC97C_CMR_SIZE_16;
+
-+ case SNDCTL_DSP_CHANNELS:
-+ if (get_user(val, up))
-+ return -EFAULT;
++ switch (runtime->format) {
++ case SNDRV_PCM_FORMAT_S16_LE:
++ word |= AC97C_CMR_CEM_LITTLE;
++ break;
++ case SNDRV_PCM_FORMAT_S16_BE:
++ default:
++ word &= ~(AC97C_CMR_CEM_LITTLE);
++ break;
++ }
+
-+ if (val) {
-+ if (val < 0 || val > 2)
-+ return -EINVAL;
++ ac97c_writel(chip, CAMR, word);
+
-+ abdac_stop(dac);
-+ dac->dsp_settings.input_order
-+ += val - dac->dsp_settings.channels;
-+ dac->dsp_settings.channels = val;
-+ }
-+ return put_user(val, (int *)arg);
++ /* Set variable rate if needed */
++ if (runtime->rate != 48000) {
++ word = ac97c_readl(chip, MR);
++ word |= AC97C_MR_VRA;
++ ac97c_writel(chip, MR, word);
++ } else {
++ /* Clear Variable Rate Bit */
++ word = ac97c_readl(chip, MR);
++ word &= ~(AC97C_MR_VRA);
++ ac97c_writel(chip, MR, word);
++ }
+
-+ case SNDCTL_DSP_GETFMTS:
-+ return put_user(AFMT_S16_BE | AFMT_S16_BE, up);
++ /* Set rate */
++ snd_ac97_set_rate(chip->ac97, AC97_PCM_LR_ADC_RATE, runtime->rate);
+
-+ case SNDCTL_DSP_SETFMT:
-+ if (get_user(val, up))
-+ return -EFAULT;
++ buffer_size = frames_to_bytes(runtime, runtime->period_size) *
++ runtime->periods;
+
-+ if (val == AFMT_QUERY) {
-+ val = dac->dsp_settings.format;
-+ } else {
-+ ret = abdac_set_format(dac, val);
-+ if (ret)
-+ return ret;
-+ }
-+ return put_user(val, up);
++ chip->dma.req_rx.buffer_size = buffer_size;
++ chip->dma.req_rx.periods = runtime->periods;
+
-+ case SNDCTL_DSP_GETOSPACE:
-+ abdac_update_dma_tail(dac);
-+ abinfo.fragsize = ((1 << dac->dsp_settings.input_order)
-+ * (DMA_PERIOD_SIZE / 4));
-+ abinfo.bytes = (abdac_dma_space(dac)
-+ << dac->dsp_settings.input_order);
-+ abinfo.fragstotal = ((DMA_BUFFER_SIZE * 4)
-+ >> (DMA_PERIOD_SHIFT
-+ + dac->dsp_settings.input_order));
-+ abinfo.fragments = ((abinfo.bytes
-+ >> dac->dsp_settings.input_order)
-+ / (DMA_PERIOD_SIZE / 4));
-+ pr_debug("fragments=%d fragstotal=%d fragsize=%d bytes=%d\n",
-+ abinfo.fragments, abinfo.fragstotal, abinfo.fragsize,
-+ abinfo.bytes);
-+ return copy_to_user(up, &abinfo, sizeof(abinfo)) ? -EFAULT : 0;
++ BUG_ON(chip->dma.req_rx.buffer_size !=
++ (chip->dma.req_rx.periods *
++ frames_to_bytes(runtime, runtime->period_size)));
+
-+ default:
-+ dev_dbg(&dac->pdev->dev, "Unimplemented ioctl cmd: 0x%x\n", cmd);
-+ return -EINVAL;
-+ }
++ chip->dma.req_rx.buffer_start = runtime->dma_addr;
++ chip->dma.req_rx.data_reg = (dma_addr_t)(chip->regs + AC97C_CARHR + 2);
++ chip->dma.req_rx.periph_id = chip->dma.rx_periph_id;
++ chip->dma.req_rx.direction = DMA_DIR_PERIPH_TO_MEM;
++ chip->dma.req_rx.width = DMA_WIDTH_16BIT;
++ chip->dma.req_rx.dev_id = chip;
++
++ return 0;
+}
+
-+static int abdac_dsp_open(struct inode *inode, struct file *file)
++ static int
++snd_atmel_ac97_playback_trigger(struct snd_pcm_substream *substream, int cmd)
+{
-+ struct at32_dac *dac = the_dac;
-+ int ret;
++ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
++ unsigned long camr;
++ int flags, err = 0;
+
-+ if (file->f_mode & FMODE_READ)
-+ return -ENXIO;
++ spin_lock_irqsave(&chip->lock, flags);
++ camr = ac97c_readl(chip, CAMR);
+
-+ down(&dac->sem);
-+ ret = -EBUSY;
-+ if (dac->busy)
-+ goto out;
++ switch (cmd) {
++ case SNDRV_PCM_TRIGGER_START:
++ err = dma_prepare_request_cyclic(chip->dma.req_tx.req.dmac,
++ &chip->dma.req_tx);
++ dma_start_request(chip->dma.req_tx.req.dmac,
++ chip->dma.req_tx.req.channel);
++ camr |= AC97C_CMR_CENA;
++ break;
++ case SNDRV_PCM_TRIGGER_STOP:
++ err = dma_stop_request(chip->dma.req_tx.req.dmac,
++ chip->dma.req_tx.req.channel);
++ if (chip->opened <= 1)
++ camr &= ~AC97C_CMR_CENA;
++ break;
++ default:
++ err = -EINVAL;
++ break;
++ }
+
-+ dac->dma.head = dac->dma.tail = 0;
++ ac97c_writel(chip, CAMR, camr);
+
-+ /* FIXME: What are the correct defaults? */
-+ dac->dsp_settings.channels = 2;
-+ abdac_set_format(dac, AFMT_S16_BE);
-+ ret = abdac_set_sample_rate(dac, 8000);
-+ if (ret)
-+ goto out;
++ spin_unlock_irqrestore(&chip->lock, flags);
++ return err;
++}
+
-+ file->private_data = dac;
-+ dac->busy = 1;
++ static int
++snd_atmel_ac97_capture_trigger(struct snd_pcm_substream *substream, int cmd)
++{
++ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
++ unsigned long camr;
++ int flags, err = 0;
++
++ spin_lock_irqsave(&chip->lock, flags);
++ camr = ac97c_readl(chip, CAMR);
++
++ switch (cmd) {
++ case SNDRV_PCM_TRIGGER_START:
++ err = dma_prepare_request_cyclic(chip->dma.req_rx.req.dmac,
++ &chip->dma.req_rx);
++ dma_start_request(chip->dma.req_rx.req.dmac,
++ chip->dma.req_rx.req.channel);
++ camr |= AC97C_CMR_CENA;
++ break;
++ case SNDRV_PCM_TRIGGER_STOP:
++ err = dma_stop_request(chip->dma.req_rx.req.dmac,
++ chip->dma.req_rx.req.channel);
++ mutex_lock(&opened_mutex);
++ if (chip->opened <= 1)
++ camr &= ~AC97C_CMR_CENA;
++ mutex_unlock(&opened_mutex);
++ break;
++ default:
++ err = -EINVAL;
++ break;
++ }
+
-+ ret = 0;
++ ac97c_writel(chip, CAMR, camr);
+
-+out:
-+ up(&dac->sem);
-+ return ret;
++ spin_unlock_irqrestore(&chip->lock, flags);
++ return err;
+}
+
-+static int abdac_dsp_release(struct inode *inode, struct file *file)
++ static snd_pcm_uframes_t
++snd_atmel_ac97_playback_pointer(struct snd_pcm_substream *substream)
+{
-+ struct at32_dac *dac = file->private_data;
-+
-+ down(&dac->sem);
-+
-+ abdac_stop(dac);
-+ abdac_dma_cleanup(dac);
-+ dac->busy = 0;
++ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
++ struct snd_pcm_runtime *runtime = substream->runtime;
++ snd_pcm_uframes_t pos;
++ unsigned long bytes;
+
-+ up(&dac->sem);
++ bytes = (dma_get_current_pos
++ (chip->dma.req_tx.req.dmac,
++ chip->dma.req_tx.req.channel) - runtime->dma_addr);
++ pos = bytes_to_frames(runtime, bytes);
++ if (pos >= runtime->buffer_size)
++ pos -= runtime->buffer_size;
+
-+ return 0;
++ return pos;
+}
+
-+static struct file_operations abdac_dsp_fops = {
-+ .owner = THIS_MODULE,
-+ .llseek = no_llseek,
-+ .write = abdac_dsp_write,
-+ .ioctl = abdac_dsp_ioctl,
-+ .open = abdac_dsp_open,
-+ .release = abdac_dsp_release,
-+};
-+
-+static int __init abdac_probe(struct platform_device *pdev)
++ static snd_pcm_uframes_t
++snd_atmel_ac97_capture_pointer(struct snd_pcm_substream *substream)
+{
-+ struct at32_dac *dac;
-+ struct resource *regs;
-+ struct clk *mck;
-+ struct clk *sample_clk;
-+ int irq;
-+ int ret;
-+
-+ if (the_dac)
-+ return -EBUSY;
++ struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
++ struct snd_pcm_runtime *runtime = substream->runtime;
++ snd_pcm_uframes_t pos;
++ unsigned long bytes;
+
-+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!regs)
-+ return -ENXIO;
-+ irq = platform_get_irq(pdev, 0);
-+ if (irq < 0)
-+ return irq;
++ bytes = (dma_get_current_pos
++ (chip->dma.req_rx.req.dmac,
++ chip->dma.req_rx.req.channel)
++ - runtime->dma_addr);
++ pos = bytes_to_frames(runtime, bytes);
++ if (pos >= runtime->buffer_size)
++ pos -= runtime->buffer_size;
+
-+ mck = clk_get(&pdev->dev, "pclk");
-+ if (IS_ERR(mck))
-+ return PTR_ERR(mck);
-+ sample_clk = clk_get(&pdev->dev, "sample_clk");
-+ if (IS_ERR(sample_clk)) {
-+ ret = PTR_ERR(sample_clk);
-+ goto out_put_mck;
-+ }
-+ clk_enable(mck);
+
-+ ret = -ENOMEM;
-+ dac = kzalloc(sizeof(struct at32_dac), GFP_KERNEL);
-+ if (!dac)
-+ goto out_disable_clk;
++ return pos;
++}
+
-+ spin_lock_init(&dac->lock);
-+ init_MUTEX(&dac->sem);
-+ init_waitqueue_head(&dac->write_wait);
-+ dac->pdev = pdev;
-+ dac->mck = mck;
-+ dac->sample_clk = sample_clk;
++static struct snd_pcm_ops atmel_ac97_playback_ops = {
++ .open = snd_atmel_ac97_playback_open,
++ .close = snd_atmel_ac97_playback_close,
++ .ioctl = snd_pcm_lib_ioctl,
++ .hw_params = snd_atmel_ac97_playback_hw_params,
++ .hw_free = snd_atmel_ac97_playback_hw_free,
++ .prepare = snd_atmel_ac97_playback_prepare,
++ .trigger = snd_atmel_ac97_playback_trigger,
++ .pointer = snd_atmel_ac97_playback_pointer,
++};
+
-+ dac->regs = ioremap(regs->start, regs->end - regs->start + 1);
-+ if (!dac->regs)
-+ goto out_free_dac;
++static struct snd_pcm_ops atmel_ac97_capture_ops = {
++ .open = snd_atmel_ac97_capture_open,
++ .close = snd_atmel_ac97_capture_close,
++ .ioctl = snd_pcm_lib_ioctl,
++ .hw_params = snd_atmel_ac97_capture_hw_params,
++ .hw_free = snd_atmel_ac97_capture_hw_free,
++ .prepare = snd_atmel_ac97_capture_prepare,
++ .trigger = snd_atmel_ac97_capture_trigger,
++ .pointer = snd_atmel_ac97_capture_pointer,
++};
+
-+ ret = request_irq(irq, abdac_interrupt, 0, "dac", dac);
-+ if (ret)
-+ goto out_unmap_regs;
++static struct ac97_pcm atmel_ac97_pcm_defs[] __devinitdata = {
++ /* Playback */
++ {
++ .exclusive = 1,
++ .r = { {
++ .slots = ((1 << AC97_SLOT_PCM_LEFT)
++ | (1 << AC97_SLOT_PCM_RIGHT)
++ | (1 << AC97_SLOT_PCM_CENTER)
++ | (1 << AC97_SLOT_PCM_SLEFT)
++ | (1 << AC97_SLOT_PCM_SRIGHT)
++ | (1 << AC97_SLOT_LFE)),
++ } }
++ },
++ /* PCM in */
++ {
++ .stream = 1,
++ .exclusive = 1,
++ .r = { {
++ .slots = ((1 << AC97_SLOT_PCM_LEFT)
++ | (1 << AC97_SLOT_PCM_RIGHT)),
++ } }
++ },
++ /* Mic in */
++ {
++ .stream = 1,
++ .exclusive = 1,
++ .r = { {
++ .slots = (1<<AC97_SLOT_MIC),
++ } }
++ },
++};
+
-+ /* FIXME */
-+ dac->req.req.dmac = find_dma_controller(0);
-+ if (!dac->req.req.dmac)
-+ goto out_free_irq;
++static int __devinit snd_atmel_ac97_pcm_new(struct atmel_ac97 *chip)
++{
++ struct snd_pcm *pcm;
++ int err;
+
-+ ret = dma_alloc_channel(dac->req.req.dmac);
-+ if (ret < 0)
-+ goto out_free_irq;
++ err = snd_ac97_pcm_assign(chip->ac97_bus,
++ ARRAY_SIZE(atmel_ac97_pcm_defs),
++ atmel_ac97_pcm_defs);
++ if (err)
++ return err;
+
-+ dac->req.req.channel = ret;
-+ dac->req.req.block_complete = abdac_dma_block_complete;
-+ dac->req.req.error = abdac_dma_error;
-+ dac->req.data_reg = regs->start + DAC_DATA;
-+ dac->req.periph_id = 2; /* FIXME */
-+ dac->req.direction = DMA_DIR_MEM_TO_PERIPH;
-+ dac->req.width = DMA_WIDTH_32BIT;
++ err = snd_pcm_new(chip->card, "Atmel-AC97", 0, 1, 1, &pcm);
++ if (err)
++ return err;
+
-+ /* Make sure the DAC is silent and disabled */
-+ dac_writel(dac, DATA, 0);
-+ dac_writel(dac, CTRL, 0);
++ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK,
++ &atmel_ac97_playback_ops);
+
-+ ret = register_sound_dsp(&abdac_dsp_fops, -1);
-+ if (ret < 0)
-+ goto out_free_dma;
-+ dac->dev_dsp = ret;
++ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE,
++ &atmel_ac97_capture_ops);
+
-+ /* TODO: Register mixer */
++ snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV,
++ &chip->pdev->dev,
++ 128 * 1024, 128 * 1024);
+
-+ the_dac = dac;
-+ platform_set_drvdata(pdev, dac);
++ pcm->private_data = chip;
++ pcm->info_flags = 0;
++ strcpy(pcm->name, "Atmel-AC97");
++ chip->pcm = pcm;
+
+ return 0;
-+
-+out_free_dma:
-+ dma_release_channel(dac->req.req.dmac, dac->req.req.channel);
-+out_free_irq:
-+ free_irq(irq, dac);
-+out_unmap_regs:
-+ iounmap(dac->regs);
-+out_free_dac:
-+ kfree(dac);
-+out_disable_clk:
-+ clk_disable(mck);
-+ clk_put(sample_clk);
-+out_put_mck:
-+ clk_put(mck);
-+ return ret;
+}
+
-+static int __exit abdac_remove(struct platform_device *pdev)
++/*
++ * Mixer part.
++ */
++static int snd_atmel_ac97_mixer_new(struct atmel_ac97 *chip)
+{
-+ struct at32_dac *dac;
++ int err;
++ struct snd_ac97_template template;
+
-+ dac = platform_get_drvdata(pdev);
-+ if (dac) {
-+ unregister_sound_dsp(dac->dev_dsp);
-+ dma_release_channel(dac->req.req.dmac, dac->req.req.channel);
-+ free_irq(platform_get_irq(pdev, 0), dac);
-+ iounmap(dac->regs);
-+ clk_disable(dac->mck);
-+ clk_put(dac->sample_clk);
-+ clk_put(dac->mck);
-+ kfree(dac);
-+ platform_set_drvdata(pdev, NULL);
-+ the_dac = NULL;
-+ }
++ memset(&template, 0, sizeof(template));
++ template.private_data = chip;
++ err = snd_ac97_mixer(chip->ac97_bus, &template, &chip->ac97);
+
-+ return 0;
++ return err;
+}
+
-+static struct platform_driver abdac_driver = {
-+ .remove = __exit_p(abdac_remove),
-+ .driver = {
-+ .name = "abdac",
-+ },
-+};
-+
-+static int __init abdac_init(void)
++static void atmel_ac97_error(struct dma_request *_req)
+{
-+ return platform_driver_probe(&abdac_driver, abdac_probe);
++ struct dma_request_cyclic *req = to_dma_request_cyclic(_req);
++ struct atmel_ac97 *chip = req->dev_id;
++
++ dev_dbg(&chip->pdev->dev, "DMA Controller error, channel %d\n",
++ req->req.channel);
+}
-+module_init(abdac_init);
+
-+static void __exit abdac_exit(void)
++static void atmel_ac97_block_complete(struct dma_request *_req)
+{
-+ platform_driver_unregister(&abdac_driver);
++ struct dma_request_cyclic *req = to_dma_request_cyclic(_req);
++ struct atmel_ac97 *chip = req->dev_id;
++ if (req->periph_id == chip->dma.tx_periph_id)
++ snd_pcm_period_elapsed(chip->playback_substream);
++ else
++ snd_pcm_period_elapsed(chip->capture_substream);
+}
-+module_exit(abdac_exit);
+
-+MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
-+MODULE_DESCRIPTION("Sound Driver for the Atmel AT32 ABDAC");
-+MODULE_LICENSE("GPL");
-diff --git a/sound/oss/at32_abdac.h b/sound/oss/at32_abdac.h
-new file mode 100644
-index 0000000..3c88e25
---- /dev/null
-+++ b/sound/oss/at32_abdac.h
-@@ -0,0 +1,59 @@
+/*
-+ * Register definitions for the Atmel AT32 on-chip DAC.
-+ *
-+ * Copyright (C) 2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
++ * Codec part.
+ */
-+#ifndef __SOUND_OSS_AT32_ABDAC_H__
-+#define __SOUND_OSS_AT32_ABDAC_H__
++static void snd_atmel_ac97_write(struct snd_ac97 *ac97, unsigned short reg,
++ unsigned short val)
++{
++ struct atmel_ac97 *chip = get_chip(ac97);
++ unsigned long word;
++ int timeout = 40;
+
-+/* DAC register offsets */
-+#define DAC_DATA 0x0000
-+#define DAC_CTRL 0x0008
-+#define DAC_INT_MASK 0x000c
-+#define DAC_INT_EN 0x0010
-+#define DAC_INT_DIS 0x0014
-+#define DAC_INT_CLR 0x0018
-+#define DAC_INT_STATUS 0x001c
-+#define DAC_PDC_DATA 0x0020
++ word = (reg & 0x7f) << 16 | val;
+
-+/* Bitfields in CTRL */
-+#define DAC_SWAP_OFFSET 30
-+#define DAC_SWAP_SIZE 1
-+#define DAC_EN_OFFSET 31
-+#define DAC_EN_SIZE 1
++ do {
++ if (ac97c_readl(chip, COSR) & AC97C_CSR_TXRDY) {
++ ac97c_writel(chip, COTHR, word);
++ return;
++ }
++ udelay(1);
++ } while (--timeout);
+
-+/* Bitfields in INT_MASK/INT_EN/INT_DIS/INT_STATUS/INT_CLR */
-+#define DAC_UNDERRUN_OFFSET 28
-+#define DAC_UNDERRUN_SIZE 1
-+#define DAC_TX_READY_OFFSET 29
-+#define DAC_TX_READY_SIZE 1
-+#define DAC_TX_BUFFER_EMPTY_OFFSET 30
-+#define DAC_TX_BUFFER_EMPTY_SIZE 1
-+#define DAC_CHANNEL_TX_END_OFFSET 31
-+#define DAC_CHANNEL_TX_END_SIZE 1
++ dev_dbg(&chip->pdev->dev, "codec write timeout\n");
++}
+
-+/* Bit manipulation macros */
-+#define DAC_BIT(name) \
-+ (1 << DAC_##name##_OFFSET)
-+#define DAC_BF(name, value) \
-+ (((value) & ((1 << DAC_##name##_SIZE) - 1)) \
-+ << DAC_##name##_OFFSET)
-+#define DAC_BFEXT(name, value) \
-+ (((value) >> DAC_##name##_OFFSET) \
-+ & ((1 << DAC_##name##_SIZE) - 1))
-+#define DAC_BFINS(name, value, old) \
-+ (((old) & ~(((1 << DAC_##name##_SIZE) - 1) \
-+ << DAC_##name##_OFFSET)) \
-+ | DAC_BF(name,value))
++static unsigned short snd_atmel_ac97_read(struct snd_ac97 *ac97,
++ unsigned short reg)
++{
++ struct atmel_ac97 *chip = get_chip(ac97);
++ unsigned long word;
++ int timeout = 40;
++ int write = 10;
+
-+/* Register access macros */
-+#define dac_readl(port, reg) \
-+ __raw_readl((port)->regs + DAC_##reg)
-+#define dac_writel(port, reg, value) \
-+ __raw_writel((value), (port)->regs + DAC_##reg)
++ word = (0x80 | (reg & 0x7f)) << 16;
+
-+#endif /* __SOUND_OSS_AT32_ABDAC_H__ */
-diff --git a/sound/spi/Kconfig b/sound/spi/Kconfig
-new file mode 100644
-index 0000000..0d08c29
---- /dev/null
-+++ b/sound/spi/Kconfig
-@@ -0,0 +1,31 @@
-+#SPI drivers
++ if ((ac97c_readl(chip, COSR) & AC97C_CSR_RXRDY) != 0)
++ ac97c_readl(chip, CORHR);
+
-+menu "SPI devices"
-+ depends on SND != n
++retry_write:
++ timeout = 40;
+
-+config SND_AT73C213
-+ tristate "Atmel AT73C213 DAC driver"
-+ depends on ATMEL_SSC
-+ select SND_PCM
-+ help
-+ Say Y here if you want to use the Atmel AT73C213 external DAC. This
-+ DAC can be found on Atmel development boards.
++ do {
++ if ((ac97c_readl(chip, COSR) & AC97C_CSR_TXRDY) != 0) {
++ ac97c_writel(chip, COTHR, word);
++ goto read_reg;
++ }
++ udelay(10);
++ } while (--timeout);
+
-+ This driver requires the Atmel SSC driver for sound sink, a
-+ peripheral found on most AT91 and AVR32 microprocessors.
++ if (!--write)
++ goto timed_out;
++ goto retry_write;
+
-+ To compile this driver as a module, choose M here: the module will be
-+ called snd-at73c213.
++read_reg:
++ do {
++ if ((ac97c_readl(chip, COSR) & AC97C_CSR_RXRDY) != 0) {
++ unsigned short val = ac97c_readl(chip, CORHR);
++ return val;
++ }
++ udelay(10);
++ } while (--timeout);
+
-+config SND_AT73C213_TARGET_BITRATE
-+ int "Target bitrate for AT73C213"
-+ depends on SND_AT73C213
-+ default "48000"
-+ range 8000 50000
-+ help
-+ Sets the target bitrate for the bitrate calculator in the driver.
-+ Limited by hardware to be between 8000 Hz and 50000 Hz.
++ if (!--write)
++ goto timed_out;
++ goto retry_write;
+
-+ Set to 48000 Hz by default.
++timed_out:
++ dev_dbg(&chip->pdev->dev, "codec read timeout\n");
++ return 0xffff;
++}
+
-+endmenu
-diff --git a/sound/spi/Makefile b/sound/spi/Makefile
-new file mode 100644
-index 0000000..026fb73
---- /dev/null
-+++ b/sound/spi/Makefile
-@@ -0,0 +1,5 @@
-+# Makefile for SPI drivers
++static void snd_atmel_ac97_reset(struct atmel_ac97 *chip)
++{
++ /* TODO: gpio_is_valid(data->reset_pin) with kernel 2.6.26. */
++ if (chip->reset_pin >= 0) {
++ gpio_set_value(chip->reset_pin, 0);
++ /* AC97 v2.2 specifications says minimum 1 us. */
++ udelay(5);
++ gpio_set_value(chip->reset_pin, 1);
++ }
+
-+snd-at73c213-objs := at73c213.o
++ ac97c_writel(chip, MR, AC97C_MR_WRST);
++ mdelay(1);
++ ac97c_writel(chip, MR, AC97C_MR_ENA);
++}
+
-+obj-$(CONFIG_SND_AT73C213) += snd-at73c213.o
-diff --git a/sound/spi/at73c213.c b/sound/spi/at73c213.c
-new file mode 100644
-index 0000000..f514f47
---- /dev/null
-+++ b/sound/spi/at73c213.c
-@@ -0,0 +1,1121 @@
-+/*
-+ * Driver for AT73C213 16-bit stereo DAC connected to Atmel SSC
-+ *
-+ * Copyright (C) 2006-2007 Atmel Norway
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published by
-+ * the Free Software Foundation.
-+ */
++static void snd_atmel_ac97_destroy(struct snd_card *card)
++{
++ struct atmel_ac97 *chip = get_chip(card);
+
-+/*#define DEBUG*/
++ if (chip->regs)
++ iounmap(chip->regs);
+
-+#include <linux/clk.h>
-+#include <linux/err.h>
-+#include <linux/delay.h>
-+#include <linux/device.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/io.h>
++ if (chip->mck) {
++ clk_disable(chip->mck);
++ clk_put(chip->mck);
++ }
+
-+#include <sound/driver.h>
-+#include <sound/initval.h>
-+#include <sound/control.h>
-+#include <sound/core.h>
-+#include <sound/pcm.h>
++ if (chip->dma.req_tx.req.dmac) {
++ dma_release_channel(chip->dma.req_tx.req.dmac,
++ chip->dma.req_tx.req.channel);
++ }
++ if (chip->dma.req_rx.req.dmac) {
++ dma_release_channel(chip->dma.req_rx.req.dmac,
++ chip->dma.req_rx.req.channel);
++ }
++}
+
-+#include <linux/atmel-ssc.h>
-+
-+#include <linux/spi/spi.h>
-+#include <linux/spi/at73c213.h>
-+
-+#include "at73c213.h"
-+
-+#define BITRATE_MIN 8000 /* Hardware limit? */
-+#define BITRATE_TARGET CONFIG_SND_AT73C213_TARGET_BITRATE
-+#define BITRATE_MAX 50000 /* Hardware limit. */
-+
-+/* Initial (hardware reset) AT73C213 register values. */
-+static u8 snd_at73c213_original_image[18] =
-+{
-+ 0x00, /* 00 - CTRL */
-+ 0x05, /* 01 - LLIG */
-+ 0x05, /* 02 - RLIG */
-+ 0x08, /* 03 - LPMG */
-+ 0x08, /* 04 - RPMG */
-+ 0x00, /* 05 - LLOG */
-+ 0x00, /* 06 - RLOG */
-+ 0x22, /* 07 - OLC */
-+ 0x09, /* 08 - MC */
-+ 0x00, /* 09 - CSFC */
-+ 0x00, /* 0A - MISC */
-+ 0x00, /* 0B - */
-+ 0x00, /* 0C - PRECH */
-+ 0x05, /* 0D - AUXG */
-+ 0x00, /* 0E - */
-+ 0x00, /* 0F - */
-+ 0x00, /* 10 - RST */
-+ 0x00, /* 11 - PA_CTRL */
-+};
++static int __devinit snd_atmel_ac97_create(struct snd_card *card,
++ struct platform_device *pdev)
++{
++ static struct snd_ac97_bus_ops ops = {
++ .write = snd_atmel_ac97_write,
++ .read = snd_atmel_ac97_read,
++ };
++ struct atmel_ac97 *chip = get_chip(card);
++ struct ac97c_platform_data *pdata;
++ struct resource *regs;
++ struct clk *mck;
++ int err;
+
-+struct snd_at73c213 {
-+ struct snd_card *card;
-+ struct snd_pcm *pcm;
-+ struct snd_pcm_substream *substream;
-+ struct at73c213_board_info *board;
-+ int irq;
-+ int period;
-+ unsigned long bitrate;
-+ struct clk *bitclk;
-+ struct ssc_device *ssc;
-+ struct spi_device *spi;
-+ u8 spi_wbuffer[2];
-+ u8 spi_rbuffer[2];
-+ /* Image of the SPI registers in AT73C213. */
-+ u8 reg_image[18];
-+ /* Protect registers against concurrent access. */
-+ spinlock_t lock;
-+};
++ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (!regs)
++ return -ENXIO;
+
-+#define get_chip(card) ((struct snd_at73c213 *)card->private_data)
++ pdata = pdev->dev.platform_data;
++ if (!pdata)
++ return -ENXIO;
+
-+static int
-+snd_at73c213_write_reg(struct snd_at73c213 *chip, u8 reg, u8 val)
-+{
-+ struct spi_message msg;
-+ struct spi_transfer msg_xfer = {
-+ .len = 2,
-+ .cs_change = 0,
-+ };
-+ int retval;
++ chip->reset_pin = pdata->reset_pin;
+
-+ spi_message_init(&msg);
++ /* TODO: gpio_is_valid(data->reset_pin) with kernel 2.6.26. */
++ if (chip->reset_pin >= 0) {
++ if (gpio_request(chip->reset_pin, chip->card->shortname)) {
++ dev_dbg(&pdev->dev, "ac97: reset pin not available\n");
++ chip->reset_pin = -1;
++ } else {
++ gpio_direction_output(chip->reset_pin, 1);
++ }
++ }
+
-+ chip->spi_wbuffer[0] = reg;
-+ chip->spi_wbuffer[1] = val;
++ chip->dma.rx_periph_id = pdata->dma_rx_periph_id;
++ chip->dma.tx_periph_id = pdata->dma_tx_periph_id;
++ chip->dma.controller = pdata->dma_controller_id;
+
-+ msg_xfer.tx_buf = chip->spi_wbuffer;
-+ msg_xfer.rx_buf = chip->spi_rbuffer;
-+ spi_message_add_tail(&msg_xfer, &msg);
++ mck = clk_get(&pdev->dev, "pclk");
++ if (IS_ERR(mck))
++ return PTR_ERR(mck);
++ clk_enable(mck);
++ chip->mck = mck;
+
-+ retval = spi_sync(chip->spi, &msg);
++ card->private_free = snd_atmel_ac97_destroy;
+
-+ if (!retval)
-+ chip->reg_image[reg] = val;
++ spin_lock_init(&chip->lock);
++ chip->card = card;
++ chip->pdev = pdev;
+
-+ return retval;
-+}
++ chip->regs = ioremap(regs->start, regs->end - regs->start + 1);
++ if (!chip->regs)
++ return -ENOMEM;
+
-+static struct snd_pcm_hardware snd_at73c213_playback_hw = {
-+ .info = SNDRV_PCM_INFO_INTERLEAVED |
-+ SNDRV_PCM_INFO_BLOCK_TRANSFER,
-+ .formats = SNDRV_PCM_FMTBIT_S16_BE,
-+ .rates = SNDRV_PCM_RATE_CONTINUOUS,
-+ .rate_min = 8000, /* Replaced by chip->bitrate later. */
-+ .rate_max = 50000, /* Replaced by chip->bitrate later. */
-+ .channels_min = 2,
-+ .channels_max = 2,
-+ .buffer_bytes_max = 64 * 1024 - 1,
-+ .period_bytes_min = 512,
-+ .period_bytes_max = 64 * 1024 - 1,
-+ .periods_min = 4,
-+ .periods_max = 1024,
-+};
++ snd_card_set_dev(card, &pdev->dev);
+
-+/*
-+ * Calculate and set bitrate and divisions.
-+ */
-+static int snd_at73c213_set_bitrate(struct snd_at73c213 *chip)
++ err = snd_ac97_bus(card, 0, &ops, chip, &chip->ac97_bus);
++
++ return err;
++}
++
++static int __devinit snd_atmel_ac97_probe(struct platform_device *pdev)
+{
-+ unsigned long ssc_rate = clk_get_rate(chip->ssc->clk);
-+ unsigned long dac_rate_new, ssc_div, status;
-+ unsigned long ssc_div_max, ssc_div_min;
-+ int max_tries;
++ static int dev;
++ struct snd_card *card;
++ struct atmel_ac97 *chip;
++ int err;
++ int ch;
+
-+ /*
-+ * We connect two clocks here, picking divisors so the I2S clocks
-+ * out data at the same rate the DAC clocks it in ... and as close
-+ * as practical to the desired target rate.
-+ *
-+ * The DAC master clock (MCLK) is programmable, and is either 256
-+ * or (not here) 384 times the I2S output clock (BCLK).
-+ */
++ mutex_init(&opened_mutex);
++
++ err = -ENOMEM;
++ card = snd_card_new(SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1,
++ THIS_MODULE, sizeof(struct atmel_ac97));
++ if (!card)
++ goto out;
++
++ chip = get_chip(card);
++ chip->reset_pin = -1;
++
++ err = snd_atmel_ac97_create(card, pdev);
++ if (err)
++ goto out_free_card;
+
-+ /* SSC clock / (bitrate * stereo * 16-bit). */
-+ ssc_div = ssc_rate / (BITRATE_TARGET * 2 * 16);
-+ ssc_div_min = ssc_rate / (BITRATE_MAX * 2 * 16);
-+ ssc_div_max = ssc_rate / (BITRATE_MIN * 2 * 16);
-+ max_tries = (ssc_div_max - ssc_div_min) / 2;
++ snd_atmel_ac97_reset(chip);
+
-+ if (max_tries < 1)
-+ max_tries = 1;
++ err = snd_atmel_ac97_mixer_new(chip);
++ if (err)
++ goto out_free_card;
+
-+ /* ssc_div must be a power of 2. */
-+ ssc_div = (ssc_div + 1) & ~1UL;
++ err = snd_atmel_ac97_pcm_new(chip);
++ if (err)
++ goto out_free_card;
+
-+ if ((ssc_rate / (ssc_div * 2 * 16)) < BITRATE_MIN) {
-+ ssc_div -= 2;
-+ if ((ssc_rate / (ssc_div * 2 * 16)) > BITRATE_MAX)
-+ return -ENXIO;
++ chip->dma.req_tx.req.dmac = find_dma_controller(chip->dma.controller);
++ if (!chip->dma.req_tx.req.dmac) {
++ dev_dbg(&chip->pdev->dev, "DMA controller for TX missing\n");
++ err = -ENODEV;
++ goto out_free_card;
++ }
++ chip->dma.req_rx.req.dmac = find_dma_controller(chip->dma.controller);
++ if (!chip->dma.req_rx.req.dmac) {
++ dev_dbg(&chip->pdev->dev, "DMA controller for RX missing\n");
++ err = -ENODEV;
++ goto out_free_card;
+ }
+
-+ /* Search for a possible bitrate. */
-+ do {
-+ /* SSC clock / (ssc divider * 16-bit * stereo). */
-+ if ((ssc_rate / (ssc_div * 2 * 16)) < BITRATE_MIN)
-+ return -ENXIO;
++ ch = dma_alloc_channel(chip->dma.req_tx.req.dmac);
++ if (ch < 0) {
++ dev_dbg(&chip->pdev->dev,
++ "could not allocate TX DMA channel\n");
++ err = ch;
++ goto out_free_card;
++ }
++ chip->dma.req_tx.req.channel = ch;
++ chip->dma.req_tx.width = DMA_WIDTH_16BIT;
++ chip->dma.req_tx.req.block_complete = atmel_ac97_block_complete;
++ chip->dma.req_tx.req.error = atmel_ac97_error;
+
-+ /* 256 / (2 * 16) = 8 */
-+ dac_rate_new = 8 * (ssc_rate / ssc_div);
++ ch = dma_alloc_channel(chip->dma.req_rx.req.dmac);
++ if (ch < 0) {
++ dev_dbg(&chip->pdev->dev,
++ "could not allocate RX DMA channel\n");
++ err = ch;
++ goto out_free_card;
++ }
++ chip->dma.req_rx.req.channel = ch;
++ chip->dma.req_rx.width = DMA_WIDTH_16BIT;
++ chip->dma.req_rx.req.block_complete = atmel_ac97_block_complete;
++ chip->dma.req_rx.req.error = atmel_ac97_error;
+
-+ status = clk_round_rate(chip->board->dac_clk, dac_rate_new);
-+ if (status < 0)
-+ return status;
++ strcpy(card->driver, "atmel_ac97c");
++ strcpy(card->shortname, "atmel_ac97c");
++ sprintf(card->longname, "Atmel AVR32 AC97 controller");
+
-+ /* Ignore difference smaller than 256 Hz. */
-+ if ((status/256) == (dac_rate_new/256))
-+ goto set_rate;
++ err = snd_card_register(card);
++ if (err)
++ goto out_free_card;
+
-+ ssc_div += 2;
-+ } while (--max_tries);
++ platform_set_drvdata(pdev, card);
++ dev++;
+
-+ /* Not able to find a valid bitrate. */
-+ return -ENXIO;
++ dev_info(&pdev->dev, "Atmel AVR32 AC97 controller at 0x%p\n",
++ chip->regs);
+
-+set_rate:
-+ status = clk_set_rate(chip->board->dac_clk, status);
-+ if (status < 0)
-+ return status;
++ return 0;
+
-+ /* Set divider in SSC device. */
-+ ssc_writel(chip->ssc->regs, CMR, ssc_div/2);
++out_free_card:
++ /* TODO: gpio_is_valid(data->reset_pin) with kernel 2.6.26. */
++ if (chip->reset_pin >= 0)
++ gpio_free(chip->reset_pin);
++ snd_card_free(card);
++out:
++ return err;
++}
+
-+ /* SSC clock / (ssc divider * 16-bit * stereo). */
-+ chip->bitrate = ssc_rate / (ssc_div * 16 * 2);
++#ifdef CONFIG_PM
++ static int
++snd_atmel_ac97_suspend(struct platform_device *pdev, pm_message_t msg)
++{
++ struct snd_card *card = platform_get_drvdata(pdev);
++ struct atmel_ac97 *chip = card->private_data;
+
-+ dev_info(&chip->spi->dev,
-+ "at73c213: supported bitrate is %lu (%lu divider)\n",
-+ chip->bitrate, ssc_div);
++ clk_disable(chip->mck);
+
+ return 0;
+}
+
-+static int snd_at73c213_pcm_open(struct snd_pcm_substream *substream)
++static int snd_atmel_ac97_resume(struct platform_device *pdev)
+{
-+ struct snd_at73c213 *chip = snd_pcm_substream_chip(substream);
-+ struct snd_pcm_runtime *runtime = substream->runtime;
++ struct snd_card *card = platform_get_drvdata(pdev);
++ struct atmel_ac97 *chip = card->private_data;
+
-+ snd_at73c213_playback_hw.rate_min = chip->bitrate;
-+ snd_at73c213_playback_hw.rate_max = chip->bitrate;
-+ runtime->hw = snd_at73c213_playback_hw;
-+ chip->substream = substream;
++ clk_enable(chip->mck);
+
+ return 0;
+}
++#else
++#define snd_atmel_ac97_suspend NULL
++#define snd_atmel_ac97_resume NULL
++#endif
+
-+static int snd_at73c213_pcm_close(struct snd_pcm_substream *substream)
++static int __devexit snd_atmel_ac97_remove(struct platform_device *pdev)
+{
-+ struct snd_at73c213 *chip = snd_pcm_substream_chip(substream);
-+ chip->substream = NULL;
++ struct snd_card *card = platform_get_drvdata(pdev);
++ struct atmel_ac97 *chip = get_chip(card);
++
++ /* TODO: gpio_is_valid(data->reset_pin) with kernel 2.6.26. */
++ if (chip->reset_pin >= 0)
++ gpio_free(chip->reset_pin);
++ snd_card_free(card);
++ platform_set_drvdata(pdev, NULL);
+ return 0;
+}
+
-+static int snd_at73c213_pcm_hw_params(struct snd_pcm_substream *substream,
-+ struct snd_pcm_hw_params *hw_params)
++static struct platform_driver atmel_ac97_driver = {
++ .remove = __devexit_p(snd_atmel_ac97_remove),
++ .driver = {
++ .name = "atmel_ac97c",
++ },
++ .suspend = snd_atmel_ac97_suspend,
++ .resume = snd_atmel_ac97_resume,
++};
++
++static int __init atmel_ac97_init(void)
+{
-+ return snd_pcm_lib_malloc_pages(substream,
-+ params_buffer_bytes(hw_params));
++ return platform_driver_probe(&atmel_ac97_driver,
++ snd_atmel_ac97_probe);
+}
++module_init(atmel_ac97_init);
+
-+static int snd_at73c213_pcm_hw_free(struct snd_pcm_substream *substream)
++static void __exit atmel_ac97_exit(void)
+{
-+ return snd_pcm_lib_free_pages(substream);
++ platform_driver_unregister(&atmel_ac97_driver);
+}
++module_exit(atmel_ac97_exit);
+
-+static int snd_at73c213_pcm_prepare(struct snd_pcm_substream *substream)
-+{
-+ struct snd_at73c213 *chip = snd_pcm_substream_chip(substream);
-+ struct snd_pcm_runtime *runtime = substream->runtime;
-+ int block_size;
++MODULE_LICENSE("GPL");
++MODULE_DESCRIPTION("Driver for Atmel AC97 Controller");
++MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
+--- /dev/null
++++ b/sound/avr32/ac97c.h
+@@ -0,0 +1,71 @@
++/*
++ * Register definitions for the Atmel AC97 Controller.
++ *
++ * Copyright (C) 2005-2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#ifndef __SOUND_AVR32_AC97C_H
++#define __SOUND_AVR32_AC97C_H
++
++#define AC97C_MR 0x08
++#define AC97C_ICA 0x10
++#define AC97C_OCA 0x14
++#define AC97C_CARHR 0x20
++#define AC97C_CATHR 0x24
++#define AC97C_CASR 0x28
++#define AC97C_CAMR 0x2c
++#define AC97C_CBRHR 0x30
++#define AC97C_CBTHR 0x34
++#define AC97C_CBSR 0x38
++#define AC97C_CBMR 0x3c
++#define AC97C_CORHR 0x40
++#define AC97C_COTHR 0x44
++#define AC97C_COSR 0x48
++#define AC97C_COMR 0x4c
++#define AC97C_SR 0x50
++#define AC97C_IER 0x54
++#define AC97C_IDR 0x58
++#define AC97C_IMR 0x5c
++#define AC97C_VERSION 0xfc
++
++#define AC97C_CATPR PDC_TPR
++#define AC97C_CATCR PDC_TCR
++#define AC97C_CATNPR PDC_TNPR
++#define AC97C_CATNCR PDC_TNCR
++#define AC97C_CARPR PDC_RPR
++#define AC97C_CARCR PDC_RCR
++#define AC97C_CARNPR PDC_RNPR
++#define AC97C_CARNCR PDC_RNCR
++#define AC97C_PTCR PDC_PTCR
+
-+ block_size = frames_to_bytes(runtime, runtime->period_size);
++#define AC97C_MR_ENA (1 << 0)
++#define AC97C_MR_WRST (1 << 1)
++#define AC97C_MR_VRA (1 << 2)
+
-+ chip->period = 0;
++#define AC97C_CSR_TXRDY (1 << 0)
++#define AC97C_CSR_UNRUN (1 << 2)
++#define AC97C_CSR_RXRDY (1 << 4)
++#define AC97C_CSR_ENDTX (1 << 10)
++#define AC97C_CSR_ENDRX (1 << 14)
+
-+ ssc_writel(chip->ssc->regs, PDC_TPR,
-+ (long)runtime->dma_addr);
-+ ssc_writel(chip->ssc->regs, PDC_TCR, runtime->period_size * 2);
-+ ssc_writel(chip->ssc->regs, PDC_TNPR,
-+ (long)runtime->dma_addr + block_size);
-+ ssc_writel(chip->ssc->regs, PDC_TNCR, runtime->period_size * 2);
++#define AC97C_CMR_SIZE_20 (0 << 16)
++#define AC97C_CMR_SIZE_18 (1 << 16)
++#define AC97C_CMR_SIZE_16 (2 << 16)
++#define AC97C_CMR_SIZE_10 (3 << 16)
++#define AC97C_CMR_CEM_LITTLE (1 << 18)
++#define AC97C_CMR_CEM_BIG (0 << 18)
++#define AC97C_CMR_CENA (1 << 21)
++#define AC97C_CMR_PDCEN (1 << 22)
+
-+ return 0;
-+}
++#define AC97C_SR_CAEVT (1 << 3)
+
-+static int snd_at73c213_pcm_trigger(struct snd_pcm_substream *substream,
-+ int cmd)
-+{
-+ struct snd_at73c213 *chip = snd_pcm_substream_chip(substream);
-+ int retval = 0;
++#define AC97C_CH_ASSIGN(slot, channel) \
++ (AC97C_CHANNEL_##channel << (3 * (AC97_SLOT_##slot - 3)))
++#define AC97C_CHANNEL_NONE 0x0
++#define AC97C_CHANNEL_A 0x1
++#define AC97C_CHANNEL_B 0x2
+
-+ spin_lock(&chip->lock);
++#endif /* __SOUND_AVR32_AC97C_H */
+--- a/sound/oss/Kconfig
++++ b/sound/oss/Kconfig
+@@ -654,3 +654,7 @@ config SOUND_SH_DAC_AUDIO_CHANNEL
+ int "DAC channel"
+ default "1"
+ depends on SOUND_SH_DAC_AUDIO
+
-+ switch (cmd) {
-+ case SNDRV_PCM_TRIGGER_START:
-+ ssc_writel(chip->ssc->regs, IER, SSC_BIT(IER_ENDTX));
-+ ssc_writel(chip->ssc->regs, PDC_PTCR, SSC_BIT(PDC_PTCR_TXTEN));
-+ break;
-+ case SNDRV_PCM_TRIGGER_STOP:
-+ ssc_writel(chip->ssc->regs, PDC_PTCR, SSC_BIT(PDC_PTCR_TXTDIS));
-+ ssc_writel(chip->ssc->regs, IDR, SSC_BIT(IDR_ENDTX));
-+ break;
-+ default:
-+ dev_dbg(&chip->spi->dev, "spurious command %x\n", cmd);
-+ retval = -EINVAL;
-+ break;
-+ }
++config SOUND_AT32_ABDAC
++ tristate "Atmel AT32 Audio Bitstream DAC (ABDAC) support"
++ depends on SOUND_PRIME && AVR32
+--- a/sound/oss/Makefile
++++ b/sound/oss/Makefile
+@@ -9,6 +9,7 @@ obj-$(CONFIG_SOUND_OSS) += sound.o
+
+ # Please leave it as is, cause the link order is significant !
+
++obj-$(CONFIG_SOUND_AT32_ABDAC) += at32_abdac.o
+ obj-$(CONFIG_SOUND_SH_DAC_AUDIO) += sh_dac_audio.o
+ obj-$(CONFIG_SOUND_HAL2) += hal2.o
+ obj-$(CONFIG_SOUND_AEDSP16) += aedsp16.o
+--- /dev/null
++++ b/sound/oss/at32_abdac.c
+@@ -0,0 +1,722 @@
++/*
++ * OSS Sound Driver for the Atmel AT32 on-chip DAC.
++ *
++ * Copyright (C) 2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#include <linux/clk.h>
++#include <linux/dma-mapping.h>
++#include <linux/fs.h>
++#include <linux/init.h>
++#include <linux/interrupt.h>
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/sound.h>
++#include <linux/soundcard.h>
+
-+ spin_unlock(&chip->lock);
++#include <asm/byteorder.h>
++#include <asm/dma-controller.h>
++#include <asm/io.h>
++#include <asm/uaccess.h>
+
-+ return retval;
-+}
++/* We want to use the "bizarre" swap-bytes-in-each-halfword macro */
++#include <linux/byteorder/swabb.h>
+
-+static snd_pcm_uframes_t
-+snd_at73c213_pcm_pointer(struct snd_pcm_substream *substream)
-+{
-+ struct snd_at73c213 *chip = snd_pcm_substream_chip(substream);
-+ struct snd_pcm_runtime *runtime = substream->runtime;
-+ snd_pcm_uframes_t pos;
-+ unsigned long bytes;
++#include "at32_abdac.h"
+
-+ bytes = ssc_readl(chip->ssc->regs, PDC_TPR)
-+ - (unsigned long)runtime->dma_addr;
++#define DMA_BUFFER_SIZE 32768
++#define DMA_PERIOD_SHIFT 10
++#define DMA_PERIOD_SIZE (1 << DMA_PERIOD_SHIFT)
++#define DMA_WRITE_THRESHOLD DMA_PERIOD_SIZE
+
-+ pos = bytes_to_frames(runtime, bytes);
-+ if (pos >= runtime->buffer_size)
-+ pos -= runtime->buffer_size;
++struct sound_settings {
++ unsigned int format;
++ unsigned int channels;
++ unsigned int sample_rate;
++ /* log2(bytes per sample) */
++ unsigned int input_order;
++};
++
++struct at32_dac {
++ spinlock_t lock;
++ void __iomem *regs;
++
++ /* head and tail refer to number of words */
++ struct {
++ u32 *buf;
++ int head;
++ int tail;
++ } dma;
++
++ struct semaphore sem;
++ wait_queue_head_t write_wait;
++
++ /*
++ * Read at most ucount bytes from ubuf, translate to 2-channel
++ * signed 16-bit big endian format and write to the DMA buffer
++ * as long as there is room left. Return the number of bytes
++ * successfully copied from ubuf, or -EFAULT if the first
++ * sample from ubuf couldn't be read. This function is not
++ * called unless there is room for at least one sample (4
++ * bytes) in the DMA buffer.
++ */
++ ssize_t (*trans)(struct at32_dac *dac, const char __user *ubuf,
++ size_t ucount);
+
-+ return pos;
-+}
++ struct sound_settings dsp_settings;
++ struct dma_request_cyclic req;
+
-+static struct snd_pcm_ops at73c213_playback_ops = {
-+ .open = snd_at73c213_pcm_open,
-+ .close = snd_at73c213_pcm_close,
-+ .ioctl = snd_pcm_lib_ioctl,
-+ .hw_params = snd_at73c213_pcm_hw_params,
-+ .hw_free = snd_at73c213_pcm_hw_free,
-+ .prepare = snd_at73c213_pcm_prepare,
-+ .trigger = snd_at73c213_pcm_trigger,
-+ .pointer = snd_at73c213_pcm_pointer,
++ struct clk *mck;
++ struct clk *sample_clk;
++ struct platform_device *pdev;
++ int busy;
++ int playing;
++ int dev_dsp;
+};
++static struct at32_dac *the_dac;
+
-+static void snd_at73c213_pcm_free(struct snd_pcm *pcm)
++static inline unsigned int abdac_get_head(struct at32_dac *dac)
+{
-+ struct snd_at73c213 *chip = snd_pcm_chip(pcm);
-+ if (chip->pcm) {
-+ snd_pcm_lib_preallocate_free_for_all(chip->pcm);
-+ chip->pcm = NULL;
-+ }
++ return dac->dma.head & ((DMA_BUFFER_SIZE / 4) - 1);
+}
+
-+static int __devinit snd_at73c213_pcm_new(struct snd_at73c213 *chip, int device)
++static inline unsigned int abdac_get_tail(struct at32_dac *dac)
+{
-+ struct snd_pcm *pcm;
-+ int retval;
-+
-+ retval = snd_pcm_new(chip->card, chip->card->shortname,
-+ device, 1, 0, &pcm);
-+ if (retval < 0)
-+ goto out;
-+
-+ pcm->private_data = chip;
-+ pcm->private_free = snd_at73c213_pcm_free;
-+ pcm->info_flags = SNDRV_PCM_INFO_BLOCK_TRANSFER;
-+ strcpy(pcm->name, "at73c213");
-+ chip->pcm = pcm;
-+
-+ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &at73c213_playback_ops);
-+
-+ retval = snd_pcm_lib_preallocate_pages_for_all(chip->pcm,
-+ SNDRV_DMA_TYPE_DEV, &chip->ssc->pdev->dev,
-+ 64 * 1024, 64 * 1024);
-+out:
-+ return retval;
++ return dac->dma.tail & ((DMA_BUFFER_SIZE / 4) - 1);
+}
+
-+static irqreturn_t snd_at73c213_interrupt(int irq, void *dev_id)
++static inline unsigned int abdac_dma_space(struct at32_dac *dac)
+{
-+ struct snd_at73c213 *chip = dev_id;
-+ struct snd_pcm_runtime *runtime = chip->substream->runtime;
-+ u32 status;
-+ int offset;
-+ int block_size;
-+ int next_period;
-+ int retval = IRQ_NONE;
-+
-+ spin_lock(&chip->lock);
-+
-+ block_size = frames_to_bytes(runtime, runtime->period_size);
-+ status = ssc_readl(chip->ssc->regs, IMR);
++ unsigned int space;
+
-+ if (status & SSC_BIT(IMR_ENDTX)) {
-+ chip->period++;
-+ if (chip->period == runtime->periods)
-+ chip->period = 0;
-+ next_period = chip->period + 1;
-+ if (next_period == runtime->periods)
-+ next_period = 0;
++ space = ((dac->dma.tail - dac->dma.head - 1)
++ & ((DMA_BUFFER_SIZE / 4) - 1));
++ return space;
++}
+
-+ offset = block_size * next_period;
++static void abdac_update_dma_tail(struct at32_dac *dac)
++{
++ dma_addr_t dma_addr;
++ unsigned int new_tail;
+
-+ ssc_writel(chip->ssc->regs, PDC_TNPR,
-+ (long)runtime->dma_addr + offset);
-+ ssc_writel(chip->ssc->regs, PDC_TNCR, runtime->period_size * 2);
-+ retval = IRQ_HANDLED;
++ if (dac->playing) {
++ dma_addr = dma_get_current_pos(dac->req.req.dmac,
++ dac->req.req.channel);
++ new_tail = (dma_addr - dac->req.buffer_start) / 4;
++ if (new_tail >= dac->dma.head
++ && (dac->dma.tail < dac->dma.head
++ || dac->dma.tail > new_tail))
++ dev_notice(&dac->pdev->dev, "DMA underrun detected!\n");
++ dac->dma.tail = new_tail;
++ dev_dbg(&dac->pdev->dev, "update tail: 0x%x - 0x%x = %u\n",
++ dma_addr, dac->req.buffer_start, dac->dma.tail);
+ }
-+
-+ ssc_readl(chip->ssc->regs, IMR);
-+ spin_unlock(&chip->lock);
-+
-+ if (status & SSC_BIT(IMR_ENDTX))
-+ snd_pcm_period_elapsed(chip->substream);
-+
-+ return retval;
+}
+
-+/*
-+ * Mixer functions.
-+ */
-+static int snd_at73c213_mono_get(struct snd_kcontrol *kcontrol,
-+ struct snd_ctl_elem_value *ucontrol)
++static int abdac_start(struct at32_dac *dac)
+{
-+ struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
-+ int reg = kcontrol->private_value & 0xff;
-+ int shift = (kcontrol->private_value >> 8) & 0xff;
-+ int mask = (kcontrol->private_value >> 16) & 0xff;
-+ int invert = (kcontrol->private_value >> 24) & 0xff;
-+
-+ spin_lock_irq(&chip->lock);
-+
-+ ucontrol->value.integer.value[0] = (chip->reg_image[reg] >> shift) & mask;
-+
-+ if (invert)
-+ ucontrol->value.integer.value[0] =
-+ (mask - ucontrol->value.integer.value[0]);
-+
-+ spin_unlock_irq(&chip->lock);
++ int ret;
+
-+ return 0;
-+}
++ if (dac->playing)
++ return 0;
+
-+static int snd_at73c213_mono_put(struct snd_kcontrol *kcontrol,
-+ struct snd_ctl_elem_value *ucontrol)
-+{
-+ struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
-+ int reg = kcontrol->private_value & 0xff;
-+ int shift = (kcontrol->private_value >> 8) & 0xff;
-+ int mask = (kcontrol->private_value >> 16) & 0xff;
-+ int invert = (kcontrol->private_value >> 24) & 0xff;
-+ int change, retval;
-+ unsigned short val;
++ memset(dac->dma.buf, 0, DMA_BUFFER_SIZE);
+
-+ val = (ucontrol->value.integer.value[0] & mask);
-+ if (invert)
-+ val = mask - val;
-+ val <<= shift;
++ clk_enable(dac->sample_clk);
+
-+ spin_lock_irq(&chip->lock);
++ ret = dma_prepare_request_cyclic(dac->req.req.dmac, &dac->req);
++ if (ret)
++ goto out_stop_clock;
+
-+ val = (chip->reg_image[reg] & ~(mask << shift)) | val;
-+ change = val != chip->reg_image[reg];
-+ retval = snd_at73c213_write_reg(chip, reg, val);
++ dev_dbg(&dac->pdev->dev, "starting DMA...\n");
++ ret = dma_start_request(dac->req.req.dmac, dac->req.req.channel);
++ if (ret)
++ goto out_stop_request;
+
-+ spin_unlock_irq(&chip->lock);
++ dac_writel(dac, CTRL, DAC_BIT(EN));
++ dac->playing = 1;
+
-+ if (retval)
-+ return retval;
++ return 0;
+
-+ return change;
++out_stop_request:
++ dma_stop_request(dac->req.req.dmac,
++ dac->req.req.channel);
++out_stop_clock:
++ clk_disable(dac->sample_clk);
++ return ret;
+}
+
-+static int snd_at73c213_stereo_info(struct snd_kcontrol *kcontrol,
-+ struct snd_ctl_elem_info *uinfo)
++static int abdac_stop(struct at32_dac *dac)
+{
-+ int mask = (kcontrol->private_value >> 24) & 0xff;
-+
-+ if (mask == 1)
-+ uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
-+ else
-+ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
-+
-+ uinfo->count = 2;
-+ uinfo->value.integer.min = 0;
-+ uinfo->value.integer.max = mask;
++ if (dac->playing) {
++ dma_stop_request(dac->req.req.dmac, dac->req.req.channel);
++ dac_writel(dac, DATA, 0);
++ dac_writel(dac, CTRL, 0);
++ dac->playing = 0;
++ clk_disable(dac->sample_clk);
++ }
+
+ return 0;
+}
+
-+static int snd_at73c213_stereo_get(struct snd_kcontrol *kcontrol,
-+ struct snd_ctl_elem_value *ucontrol)
++static int abdac_dma_prepare(struct at32_dac *dac)
+{
-+ struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
-+ int left_reg = kcontrol->private_value & 0xff;
-+ int right_reg = (kcontrol->private_value >> 8) & 0xff;
-+ int shift_left = (kcontrol->private_value >> 16) & 0x07;
-+ int shift_right = (kcontrol->private_value >> 19) & 0x07;
-+ int mask = (kcontrol->private_value >> 24) & 0xff;
-+ int invert = (kcontrol->private_value >> 22) & 1;
-+
-+ spin_lock_irq(&chip->lock);
-+
-+ ucontrol->value.integer.value[0] =
-+ (chip->reg_image[left_reg] >> shift_left) & mask;
-+ ucontrol->value.integer.value[1] =
-+ (chip->reg_image[right_reg] >> shift_right) & mask;
-+
-+ if (invert) {
-+ ucontrol->value.integer.value[0] =
-+ (mask - ucontrol->value.integer.value[0]);
-+ ucontrol->value.integer.value[1] =
-+ (mask - ucontrol->value.integer.value[1]);
-+ }
++ dac->dma.buf = dma_alloc_coherent(&dac->pdev->dev, DMA_BUFFER_SIZE,
++ &dac->req.buffer_start, GFP_KERNEL);
++ if (!dac->dma.buf)
++ return -ENOMEM;
+
-+ spin_unlock_irq(&chip->lock);
++ dac->dma.head = dac->dma.tail = 0;
++ dac->req.periods = DMA_BUFFER_SIZE / DMA_PERIOD_SIZE;
++ dac->req.buffer_size = DMA_BUFFER_SIZE;
+
+ return 0;
+}
+
-+static int snd_at73c213_stereo_put(struct snd_kcontrol *kcontrol,
-+ struct snd_ctl_elem_value *ucontrol)
++static void abdac_dma_cleanup(struct at32_dac *dac)
+{
-+ struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
-+ int left_reg = kcontrol->private_value & 0xff;
-+ int right_reg = (kcontrol->private_value >> 8) & 0xff;
-+ int shift_left = (kcontrol->private_value >> 16) & 0x07;
-+ int shift_right = (kcontrol->private_value >> 19) & 0x07;
-+ int mask = (kcontrol->private_value >> 24) & 0xff;
-+ int invert = (kcontrol->private_value >> 22) & 1;
-+ int change, retval;
-+ unsigned short val1, val2;
-+
-+ val1 = ucontrol->value.integer.value[0] & mask;
-+ val2 = ucontrol->value.integer.value[1] & mask;
-+ if (invert) {
-+ val1 = mask - val1;
-+ val2 = mask - val2;
-+ }
-+ val1 <<= shift_left;
-+ val2 <<= shift_right;
-+
-+ spin_lock_irq(&chip->lock);
-+
-+ val1 = (chip->reg_image[left_reg] & ~(mask << shift_left)) | val1;
-+ val2 = (chip->reg_image[right_reg] & ~(mask << shift_right)) | val2;
-+ change = val1 != chip->reg_image[left_reg]
-+ || val2 != chip->reg_image[right_reg];
-+ retval = snd_at73c213_write_reg(chip, left_reg, val1);
-+ if (retval) {
-+ spin_unlock_irq(&chip->lock);
-+ goto out;
-+ }
-+ retval = snd_at73c213_write_reg(chip, right_reg, val2);
-+ if (retval) {
-+ spin_unlock_irq(&chip->lock);
-+ goto out;
-+ }
-+
-+ spin_unlock_irq(&chip->lock);
-+
-+ return change;
-+
-+out:
-+ return retval;
++ if (dac->dma.buf)
++ dma_free_coherent(&dac->pdev->dev, DMA_BUFFER_SIZE,
++ dac->dma.buf, dac->req.buffer_start);
++ dac->dma.buf = NULL;
+}
+
-+static int snd_at73c213_mono_switch_info(struct snd_kcontrol *kcontrol,
-+ struct snd_ctl_elem_info *uinfo)
++static void abdac_dma_block_complete(struct dma_request *req)
+{
-+ uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
-+ uinfo->count = 1;
-+ uinfo->value.integer.min = 0;
-+ uinfo->value.integer.max = 1;
++ struct dma_request_cyclic *creq = to_dma_request_cyclic(req);
++ struct at32_dac *dac = container_of(creq, struct at32_dac, req);
+
-+ return 0;
++ wake_up(&dac->write_wait);
+}
+
-+static int snd_at73c213_mono_switch_get(struct snd_kcontrol *kcontrol,
-+ struct snd_ctl_elem_value *ucontrol)
++static void abdac_dma_error(struct dma_request *req)
+{
-+ struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
-+ int reg = kcontrol->private_value & 0xff;
-+ int shift = (kcontrol->private_value >> 8) & 0xff;
-+ int invert = (kcontrol->private_value >> 24) & 0xff;
-+
-+ spin_lock_irq(&chip->lock);
++ struct dma_request_cyclic *creq = to_dma_request_cyclic(req);
++ struct at32_dac *dac = container_of(creq, struct at32_dac, req);
+
-+ ucontrol->value.integer.value[0] = (chip->reg_image[reg] >> shift) & 0x01;
++ dev_err(&dac->pdev->dev, "DMA error\n");
++}
+
-+ if (invert)
-+ ucontrol->value.integer.value[0] =
-+ (0x01 - ucontrol->value.integer.value[0]);
++static irqreturn_t abdac_interrupt(int irq, void *dev_id)
++{
++ struct at32_dac *dac = dev_id;
++ u32 status;
+
-+ spin_unlock_irq(&chip->lock);
++ status = dac_readl(dac, INT_STATUS);
++ if (status & DAC_BIT(UNDERRUN)) {
++ dev_err(&dac->pdev->dev, "Underrun detected!\n");
++ dac_writel(dac, INT_CLR, DAC_BIT(UNDERRUN));
++ } else {
++ dev_err(&dac->pdev->dev, "Spurious interrupt (status=0x%x)\n",
++ status);
++ dac_writel(dac, INT_CLR, status);
++ }
+
-+ return 0;
++ return IRQ_HANDLED;
+}
+
-+static int snd_at73c213_mono_switch_put(struct snd_kcontrol *kcontrol,
-+ struct snd_ctl_elem_value *ucontrol)
++static ssize_t trans_s16be(struct at32_dac *dac, const char __user *ubuf,
++ size_t ucount)
+{
-+ struct snd_at73c213 *chip = snd_kcontrol_chip(kcontrol);
-+ int reg = kcontrol->private_value & 0xff;
-+ int shift = (kcontrol->private_value >> 8) & 0xff;
-+ int mask = (kcontrol->private_value >> 16) & 0xff;
-+ int invert = (kcontrol->private_value >> 24) & 0xff;
-+ int change, retval;
-+ unsigned short val;
-+
-+ if (ucontrol->value.integer.value[0])
-+ val = mask;
-+ else
-+ val = 0;
-+
-+ if (invert)
-+ val = mask - val;
-+ val <<= shift;
++ ssize_t ret;
+
-+ spin_lock_irq(&chip->lock);
++ if (dac->dsp_settings.channels == 2) {
++ const u32 __user *up = (const u32 __user *)ubuf;
++ u32 sample;
+
-+ val |= (chip->reg_image[reg] & ~(mask << shift));
-+ change = val != chip->reg_image[reg];
++ for (ret = 0; ret < (ssize_t)(ucount - 3); ret += 4) {
++ if (!abdac_dma_space(dac))
++ break;
+
-+ retval = snd_at73c213_write_reg(chip, reg, val);
++ if (unlikely(__get_user(sample, up++))) {
++ if (ret == 0)
++ ret = -EFAULT;
++ break;
++ }
++ dac->dma.buf[abdac_get_head(dac)] = sample;
++ dac->dma.head++;
++ }
++ } else {
++ const u16 __user *up = (const u16 __user *)ubuf;
++ u16 sample;
+
-+ spin_unlock_irq(&chip->lock);
++ for (ret = 0; ret < (ssize_t)(ucount - 1); ret += 2) {
++ if (!abdac_dma_space(dac))
++ break;
+
-+ if (retval)
-+ return retval;
++ if (unlikely(__get_user(sample, up++))) {
++ if (ret == 0)
++ ret = -EFAULT;
++ break;
++ }
++ dac->dma.buf[abdac_get_head(dac)]
++ = (sample << 16) | sample;
++ dac->dma.head++;
++ }
++ }
+
-+ return change;
++ return ret;
+}
+
-+static int snd_at73c213_pa_volume_info(struct snd_kcontrol *kcontrol,
-+ struct snd_ctl_elem_info *uinfo)
++static ssize_t trans_s16le(struct at32_dac *dac, const char __user *ubuf,
++ size_t ucount)
+{
-+ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
-+ uinfo->count = 1;
-+ uinfo->value.integer.min = 0;
-+ uinfo->value.integer.max = ((kcontrol->private_value >> 16) & 0xff) - 1;
++ ssize_t ret;
+
-+ return 0;
-+}
++ if (dac->dsp_settings.channels == 2) {
++ const u32 __user *up = (const u32 __user *)ubuf;
++ u32 sample;
+
-+static int snd_at73c213_line_capture_volume_info(
-+ struct snd_kcontrol *kcontrol,
-+ struct snd_ctl_elem_info *uinfo)
-+{
-+ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
-+ uinfo->count = 2;
-+ /* When inverted will give values 0x10001 => 0. */
-+ uinfo->value.integer.min = 14;
-+ uinfo->value.integer.max = 31;
++ for (ret = 0; ret < (ssize_t)(ucount - 3); ret += 4) {
++ if (!abdac_dma_space(dac))
++ break;
+
-+ return 0;
++ if (unlikely(__get_user(sample, up++))) {
++ if (ret == 0)
++ ret = -EFAULT;
++ break;
++ }
++ /* Swap bytes in each halfword */
++ dac->dma.buf[abdac_get_head(dac)] = swahb32(sample);
++ dac->dma.head++;
++ }
++ } else {
++ const u16 __user *up = (const u16 __user *)ubuf;
++ u16 sample;
++
++ for (ret = 0; ret < (ssize_t)(ucount - 1); ret += 2) {
++ if (!abdac_dma_space(dac))
++ break;
++
++ if (unlikely(__get_user(sample, up++))) {
++ if (ret == 0)
++ ret = -EFAULT;
++ break;
++ }
++ sample = swab16(sample);
++ dac->dma.buf[abdac_get_head(dac)]
++ = (sample << 16) | sample;
++ dac->dma.head++;
++ }
++ }
++
++ return ret;
+}
+
-+static int snd_at73c213_aux_capture_volume_info(
-+ struct snd_kcontrol *kcontrol,
-+ struct snd_ctl_elem_info *uinfo)
++static ssize_t abdac_dma_translate_from_user(struct at32_dac *dac,
++ const char __user *buffer,
++ size_t count)
+{
-+ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
-+ uinfo->count = 1;
-+ /* When inverted will give values 0x10001 => 0. */
-+ uinfo->value.integer.min = 14;
-+ uinfo->value.integer.max = 31;
++ /* At least one buffer must be available at this point */
++ dev_dbg(&dac->pdev->dev, "copying %zu bytes from user...\n", count);
+
-+ return 0;
++ return dac->trans(dac, buffer, count);
+}
+
-+#define AT73C213_MONO_SWITCH(xname, xindex, reg, shift, mask, invert) \
-+{ \
-+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
-+ .name = xname, \
-+ .index = xindex, \
-+ .info = snd_at73c213_mono_switch_info, \
-+ .get = snd_at73c213_mono_switch_get, \
-+ .put = snd_at73c213_mono_switch_put, \
-+ .private_value = (reg | (shift << 8) | (mask << 16) | (invert << 24)) \
-+}
-+
-+#define AT73C213_STEREO(xname, xindex, left_reg, right_reg, shift_left, shift_right, mask, invert) \
-+{ \
-+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
-+ .name = xname, \
-+ .index = xindex, \
-+ .info = snd_at73c213_stereo_info, \
-+ .get = snd_at73c213_stereo_get, \
-+ .put = snd_at73c213_stereo_put, \
-+ .private_value = (left_reg | (right_reg << 8) \
-+ | (shift_left << 16) | (shift_right << 19) \
-+ | (mask << 24) | (invert << 22)) \
-+}
-+
-+static struct snd_kcontrol_new snd_at73c213_controls[] __devinitdata = {
-+AT73C213_STEREO("Master Playback Volume", 0, DAC_LMPG, DAC_RMPG, 0, 0, 0x1f, 1),
-+AT73C213_STEREO("Master Playback Switch", 0, DAC_LMPG, DAC_RMPG, 5, 5, 1, 1),
-+AT73C213_STEREO("PCM Playback Volume", 0, DAC_LLOG, DAC_RLOG, 0, 0, 0x1f, 1),
-+AT73C213_STEREO("PCM Playback Switch", 0, DAC_LLOG, DAC_RLOG, 5, 5, 1, 1),
-+AT73C213_MONO_SWITCH("Mono PA Playback Switch", 0, DAC_CTRL, DAC_CTRL_ONPADRV, 0x01, 0),
-+{
-+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-+ .name = "PA Playback Volume",
-+ .index = 0,
-+ .info = snd_at73c213_pa_volume_info,
-+ .get = snd_at73c213_mono_get,
-+ .put = snd_at73c213_mono_put,
-+ .private_value = PA_CTRL | (PA_CTRL_APAGAIN << 8) | (0x0f << 16) | (1 << 24),
-+},
-+AT73C213_MONO_SWITCH("PA High Gain Playback Switch", 0, PA_CTRL, PA_CTRL_APALP, 0x01, 1),
-+AT73C213_MONO_SWITCH("PA Playback Switch", 0, PA_CTRL, PA_CTRL_APAON, 0x01, 0),
-+{
-+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-+ .name = "Aux Capture Volume",
-+ .index = 0,
-+ .info = snd_at73c213_aux_capture_volume_info,
-+ .get = snd_at73c213_mono_get,
-+ .put = snd_at73c213_mono_put,
-+ .private_value = DAC_AUXG | (0 << 8) | (0x1f << 16) | (1 << 24),
-+},
-+AT73C213_MONO_SWITCH("Aux Capture Switch", 0, DAC_CTRL, DAC_CTRL_ONAUXIN, 0x01, 0),
-+{
-+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-+ .name = "Line Capture Volume",
-+ .index = 0,
-+ .info = snd_at73c213_line_capture_volume_info,
-+ .get = snd_at73c213_stereo_get,
-+ .put = snd_at73c213_stereo_put,
-+ .private_value = DAC_LLIG | (DAC_RLIG << 8) | (0 << 16) | (0 << 19)
-+ | (0x1f << 24) | (1 << 22),
-+},
-+AT73C213_MONO_SWITCH("Line Capture Switch", 0, DAC_CTRL, 0, 0x03, 0),
-+};
-+
-+static int __devinit snd_at73c213_mixer(struct snd_at73c213 *chip)
++static int abdac_set_format(struct at32_dac *dac, int format)
+{
-+ struct snd_card *card;
-+ int errval, idx;
++ unsigned int order;
+
-+ if (chip == NULL || chip->pcm == NULL)
++ switch (format) {
++ case AFMT_S16_BE:
++ order = 1;
++ dac->trans = trans_s16be;
++ break;
++ case AFMT_S16_LE:
++ order = 1;
++ dac->trans = trans_s16le;
++ break;
++ default:
++ dev_dbg(&dac->pdev->dev, "unsupported format: %d\n", format);
+ return -EINVAL;
-+
-+ card = chip->card;
-+
-+ strcpy(card->mixername, chip->pcm->name);
-+
-+ for (idx = 0; idx < ARRAY_SIZE(snd_at73c213_controls); idx++) {
-+ errval = snd_ctl_add(card,
-+ snd_ctl_new1(&snd_at73c213_controls[idx],
-+ chip));
-+ if (errval < 0)
-+ goto cleanup;
-+ }
-+
-+ return 0;
-+
-+cleanup:
-+ for (idx = 1; idx < ARRAY_SIZE(snd_at73c213_controls) + 1; idx++) {
-+ struct snd_kcontrol *kctl;
-+ kctl = snd_ctl_find_numid(card, idx);
-+ if (kctl)
-+ snd_ctl_remove(card, kctl);
+ }
-+ return errval;
-+}
+
-+/*
-+ * Device functions
-+ */
-+static int snd_at73c213_ssc_init(struct snd_at73c213 *chip)
-+{
-+ /*
-+ * Continuous clock output.
-+ * Starts on falling TF.
-+ * Delay 1 cycle (1 bit).
-+ * Periode is 16 bit (16 - 1).
-+ */
-+ ssc_writel(chip->ssc->regs, TCMR,
-+ SSC_BF(TCMR_CKO, 1)
-+ | SSC_BF(TCMR_START, 4)
-+ | SSC_BF(TCMR_STTDLY, 1)
-+ | SSC_BF(TCMR_PERIOD, 16 - 1));
-+ /*
-+ * Data length is 16 bit (16 - 1).
-+ * Transmit MSB first.
-+ * Transmit 2 words each transfer.
-+ * Frame sync length is 16 bit (16 - 1).
-+ * Frame starts on negative pulse.
-+ */
-+ ssc_writel(chip->ssc->regs, TFMR,
-+ SSC_BF(TFMR_DATLEN, 16 - 1)
-+ | SSC_BIT(TFMR_MSBF)
-+ | SSC_BF(TFMR_DATNB, 1)
-+ | SSC_BF(TFMR_FSLEN, 16 - 1)
-+ | SSC_BF(TFMR_FSOS, 1));
++ if (dac->dsp_settings.channels == 2)
++ order++;
+
++ dac->dsp_settings.input_order = order;
++ dac->dsp_settings.format = format;
+ return 0;
+}
+
-+static int snd_at73c213_chip_init(struct snd_at73c213 *chip)
++static int abdac_set_sample_rate(struct at32_dac *dac, unsigned long rate)
+{
-+ int retval;
-+ unsigned char dac_ctrl = 0;
++ unsigned long new_rate;
++ int ret;
+
-+ retval = snd_at73c213_set_bitrate(chip);
-+ if (retval)
-+ goto out;
++ ret = clk_set_rate(dac->sample_clk, 256 * rate);
++ if (ret < 0)
++ return ret;
+
-+ /* Enable DAC master clock. */
-+ clk_enable(chip->board->dac_clk);
++ /* TODO: mplayer seems to have a problem with this */
++#if 0
++ new_rate = clk_get_rate(dac->sample_clk);
++ dac->dsp_settings.sample_rate = new_rate / 256;
++#else
++ dac->dsp_settings.sample_rate = rate;
++#endif
+
-+ /* Initialize at73c213 on SPI bus. */
-+ retval = snd_at73c213_write_reg(chip, DAC_RST, 0x04);
-+ if (retval)
-+ goto out_clk;
-+ msleep(1);
-+ retval = snd_at73c213_write_reg(chip, DAC_RST, 0x03);
-+ if (retval)
-+ goto out_clk;
++ return 0;
++}
+
-+ /* Precharge everything. */
-+ retval = snd_at73c213_write_reg(chip, DAC_PRECH, 0xff);
-+ if (retval)
-+ goto out_clk;
-+ retval = snd_at73c213_write_reg(chip, PA_CTRL, (1<<PA_CTRL_APAPRECH));
-+ if (retval)
-+ goto out_clk;
-+ retval = snd_at73c213_write_reg(chip, DAC_CTRL,
-+ (1<<DAC_CTRL_ONLNOL) | (1<<DAC_CTRL_ONLNOR));
-+ if (retval)
-+ goto out_clk;
++static ssize_t abdac_dsp_write(struct file *file,
++ const char __user *buffer,
++ size_t count, loff_t *ppos)
++{
++ struct at32_dac *dac = file->private_data;
++ DECLARE_WAITQUEUE(wait, current);
++ unsigned int avail;
++ ssize_t copied;
++ ssize_t ret;
+
-+ msleep(50);
++ /* Avoid address space checking in the translation functions */
++ if (!access_ok(buffer, count, VERIFY_READ))
++ return -EFAULT;
+
-+ /* Stop precharging PA. */
-+ retval = snd_at73c213_write_reg(chip, PA_CTRL,
-+ (1<<PA_CTRL_APALP) | 0x0f);
-+ if (retval)
-+ goto out_clk;
++ down(&dac->sem);
+
-+ msleep(450);
++ if (!dac->dma.buf) {
++ ret = abdac_dma_prepare(dac);
++ if (ret)
++ goto out;
++ }
+
-+ /* Stop precharging DAC, turn on master power. */
-+ retval = snd_at73c213_write_reg(chip, DAC_PRECH, (1<<DAC_PRECH_ONMSTR));
-+ if (retval)
-+ goto out_clk;
++ add_wait_queue(&dac->write_wait, &wait);
++ ret = 0;
++ while (count > 0) {
++ do {
++ abdac_update_dma_tail(dac);
++ avail = abdac_dma_space(dac);
++ set_current_state(TASK_INTERRUPTIBLE);
++ if (avail >= DMA_WRITE_THRESHOLD)
++ break;
+
-+ msleep(1);
++ if (file->f_flags & O_NONBLOCK) {
++ if (!ret)
++ ret = -EAGAIN;
++ goto out;
++ }
+
-+ /* Turn on DAC. */
-+ dac_ctrl = (1<<DAC_CTRL_ONDACL) | (1<<DAC_CTRL_ONDACR)
-+ | (1<<DAC_CTRL_ONLNOL) | (1<<DAC_CTRL_ONLNOR);
++ pr_debug("Going to wait (avail = %u, count = %zu)\n",
++ avail, count);
+
-+ retval = snd_at73c213_write_reg(chip, DAC_CTRL, dac_ctrl);
-+ if (retval)
-+ goto out_clk;
++ up(&dac->sem);
++ schedule();
++ if (signal_pending(current)) {
++ if (!ret)
++ ret = -ERESTARTSYS;
++ goto out_nosem;
++ }
++ down(&dac->sem);
++ } while (1);
+
-+ /* Mute sound. */
-+ retval = snd_at73c213_write_reg(chip, DAC_LMPG, 0x3f);
-+ if (retval)
-+ goto out_clk;
-+ retval = snd_at73c213_write_reg(chip, DAC_RMPG, 0x3f);
-+ if (retval)
-+ goto out_clk;
-+ retval = snd_at73c213_write_reg(chip, DAC_LLOG, 0x3f);
-+ if (retval)
-+ goto out_clk;
-+ retval = snd_at73c213_write_reg(chip, DAC_RLOG, 0x3f);
-+ if (retval)
-+ goto out_clk;
-+ retval = snd_at73c213_write_reg(chip, DAC_LLIG, 0x11);
-+ if (retval)
-+ goto out_clk;
-+ retval = snd_at73c213_write_reg(chip, DAC_RLIG, 0x11);
-+ if (retval)
-+ goto out_clk;
-+ retval = snd_at73c213_write_reg(chip, DAC_AUXG, 0x11);
-+ if (retval)
-+ goto out_clk;
++ copied = abdac_dma_translate_from_user(dac, buffer, count);
++ if (copied < 0) {
++ if (!ret)
++ ret = -EFAULT;
++ goto out;
++ }
+
-+ /* Enable I2S device, i.e. clock output. */
-+ ssc_writel(chip->ssc->regs, CR, SSC_BIT(CR_TXEN));
++ abdac_start(dac);
+
-+ goto out;
++ count -= copied;
++ ret += copied;
++ }
+
-+out_clk:
-+ clk_disable(chip->board->dac_clk);
+out:
-+ return retval;
++ up(&dac->sem);
++out_nosem:
++ remove_wait_queue(&dac->write_wait, &wait);
++ set_current_state(TASK_RUNNING);
++ return ret;
+}
+
-+static int snd_at73c213_dev_free(struct snd_device *device)
++static int abdac_dsp_ioctl(struct inode *inode, struct file *file,
++ unsigned int cmd, unsigned long arg)
+{
-+ struct snd_at73c213 *chip = device->device_data;
++ struct at32_dac *dac = file->private_data;
++ int __user *up = (int __user *)arg;
++ struct audio_buf_info abinfo;
++ int val, ret;
+
-+ ssc_writel(chip->ssc->regs, CR, SSC_BIT(CR_TXDIS));
-+ if (chip->irq >= 0) {
-+ free_irq(chip->irq, chip);
-+ chip->irq = -1;
-+ }
++ switch (cmd) {
++ case OSS_GETVERSION:
++ return put_user(SOUND_VERSION, up);
+
-+ return 0;
-+}
++ case SNDCTL_DSP_SPEED:
++ if (get_user(val, up))
++ return -EFAULT;
++ if (val >= 0) {
++ abdac_stop(dac);
++ ret = abdac_set_sample_rate(dac, val);
++ if (ret)
++ return ret;
++ }
++ return put_user(dac->dsp_settings.sample_rate, up);
+
-+static int __devinit snd_at73c213_dev_init(struct snd_card *card,
-+ struct spi_device *spi)
-+{
-+ static struct snd_device_ops ops = {
-+ .dev_free = snd_at73c213_dev_free,
-+ };
-+ struct snd_at73c213 *chip = get_chip(card);
-+ int irq, retval;
++ case SNDCTL_DSP_STEREO:
++ if (get_user(val, up))
++ return -EFAULT;
++ abdac_stop(dac);
++ if (val && dac->dsp_settings.channels == 1)
++ dac->dsp_settings.input_order++;
++ else if (!val && dac->dsp_settings.channels != 1)
++ dac->dsp_settings.input_order--;
++ dac->dsp_settings.channels = val ? 2 : 1;
++ return 0;
+
-+ irq = chip->ssc->irq;
-+ if (irq < 0)
-+ return irq;
++ case SNDCTL_DSP_CHANNELS:
++ if (get_user(val, up))
++ return -EFAULT;
+
-+ spin_lock_init(&chip->lock);
-+ chip->card = card;
-+ chip->irq = -1;
++ if (val) {
++ if (val < 0 || val > 2)
++ return -EINVAL;
+
-+ retval = request_irq(irq, snd_at73c213_interrupt, 0, "at73c213", chip);
-+ if (retval) {
-+ dev_dbg(&chip->spi->dev, "unable to request irq %d\n", irq);
-+ goto out;
-+ }
-+ chip->irq = irq;
++ abdac_stop(dac);
++ dac->dsp_settings.input_order
++ += val - dac->dsp_settings.channels;
++ dac->dsp_settings.channels = val;
++ }
++ return put_user(val, (int *)arg);
+
-+ memcpy(&chip->reg_image, &snd_at73c213_original_image,
-+ sizeof(snd_at73c213_original_image));
++ case SNDCTL_DSP_GETFMTS:
++ return put_user(AFMT_S16_BE | AFMT_S16_BE, up);
+
-+ retval = snd_at73c213_ssc_init(chip);
-+ if (retval)
-+ goto out_irq;
++ case SNDCTL_DSP_SETFMT:
++ if (get_user(val, up))
++ return -EFAULT;
+
-+ retval = snd_at73c213_chip_init(chip);
-+ if (retval)
-+ goto out_irq;
++ if (val == AFMT_QUERY) {
++ val = dac->dsp_settings.format;
++ } else {
++ ret = abdac_set_format(dac, val);
++ if (ret)
++ return ret;
++ }
++ return put_user(val, up);
+
-+ retval = snd_at73c213_pcm_new(chip, 0);
-+ if (retval)
-+ goto out_irq;
++ case SNDCTL_DSP_GETOSPACE:
++ abdac_update_dma_tail(dac);
++ abinfo.fragsize = ((1 << dac->dsp_settings.input_order)
++ * (DMA_PERIOD_SIZE / 4));
++ abinfo.bytes = (abdac_dma_space(dac)
++ << dac->dsp_settings.input_order);
++ abinfo.fragstotal = ((DMA_BUFFER_SIZE * 4)
++ >> (DMA_PERIOD_SHIFT
++ + dac->dsp_settings.input_order));
++ abinfo.fragments = ((abinfo.bytes
++ >> dac->dsp_settings.input_order)
++ / (DMA_PERIOD_SIZE / 4));
++ pr_debug("fragments=%d fragstotal=%d fragsize=%d bytes=%d\n",
++ abinfo.fragments, abinfo.fragstotal, abinfo.fragsize,
++ abinfo.bytes);
++ return copy_to_user(up, &abinfo, sizeof(abinfo)) ? -EFAULT : 0;
+
-+ retval = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops);
-+ if (retval)
-+ goto out_irq;
++ default:
++ dev_dbg(&dac->pdev->dev, "Unimplemented ioctl cmd: 0x%x\n", cmd);
++ return -EINVAL;
++ }
++}
+
-+ retval = snd_at73c213_mixer(chip);
-+ if (retval)
-+ goto out_snd_dev;
++static int abdac_dsp_open(struct inode *inode, struct file *file)
++{
++ struct at32_dac *dac = the_dac;
++ int ret;
+
-+ snd_card_set_dev(card, &spi->dev);
++ if (file->f_mode & FMODE_READ)
++ return -ENXIO;
+
-+ goto out;
++ down(&dac->sem);
++ ret = -EBUSY;
++ if (dac->busy)
++ goto out;
+
-+out_snd_dev:
-+ snd_device_free(card, chip);
-+out_irq:
-+ free_irq(chip->irq, chip);
-+ chip->irq = -1;
-+out:
-+ return retval;
-+}
++ dac->dma.head = dac->dma.tail = 0;
+
-+static int snd_at73c213_probe(struct spi_device *spi)
-+{
-+ struct snd_card *card;
-+ struct snd_at73c213 *chip;
-+ struct at73c213_board_info *board;
-+ int retval;
-+ char id[16];
++ /* FIXME: What are the correct defaults? */
++ dac->dsp_settings.channels = 2;
++ abdac_set_format(dac, AFMT_S16_BE);
++ ret = abdac_set_sample_rate(dac, 8000);
++ if (ret)
++ goto out;
+
-+ board = spi->dev.platform_data;
-+ if (!board) {
-+ dev_dbg(&spi->dev, "no platform_data\n");
-+ return -ENXIO;
-+ }
++ file->private_data = dac;
++ dac->busy = 1;
+
-+ if (!board->dac_clk) {
-+ dev_dbg(&spi->dev, "no DAC clk\n");
-+ return -ENXIO;
-+ }
++ ret = 0;
+
-+ if (IS_ERR(board->dac_clk)) {
-+ dev_dbg(&spi->dev, "no DAC clk\n");
-+ return PTR_ERR(board->dac_clk);
-+ }
++out:
++ up(&dac->sem);
++ return ret;
++}
+
-+ retval = -ENOMEM;
++static int abdac_dsp_release(struct inode *inode, struct file *file)
++{
++ struct at32_dac *dac = file->private_data;
+
-+ /* Allocate "card" using some unused identifiers. */
-+ snprintf(id, sizeof id, "at73c213_%d", board->ssc_id);
-+ card = snd_card_new(-1, id, THIS_MODULE, sizeof(struct snd_at73c213));
-+ if (!card)
-+ goto out;
++ down(&dac->sem);
+
-+ chip = card->private_data;
-+ chip->spi = spi;
-+ chip->board = board;
++ abdac_stop(dac);
++ abdac_dma_cleanup(dac);
++ dac->busy = 0;
+
-+ chip->ssc = ssc_request(board->ssc_id);
-+ if (IS_ERR(chip->ssc)) {
-+ dev_dbg(&spi->dev, "could not get ssc%d device\n",
-+ board->ssc_id);
-+ retval = PTR_ERR(chip->ssc);
-+ goto out_card;
-+ }
++ up(&dac->sem);
+
-+ retval = snd_at73c213_dev_init(card, spi);
-+ if (retval)
-+ goto out_ssc;
++ return 0;
++}
+
-+ strcpy(card->driver, "at73c213");
-+ strcpy(card->shortname, board->shortname);
-+ sprintf(card->longname, "%s on irq %d", card->shortname, chip->irq);
++static struct file_operations abdac_dsp_fops = {
++ .owner = THIS_MODULE,
++ .llseek = no_llseek,
++ .write = abdac_dsp_write,
++ .ioctl = abdac_dsp_ioctl,
++ .open = abdac_dsp_open,
++ .release = abdac_dsp_release,
++};
+
-+ retval = snd_card_register(card);
-+ if (retval)
-+ goto out_ssc;
++static int __init abdac_probe(struct platform_device *pdev)
++{
++ struct at32_dac *dac;
++ struct resource *regs;
++ struct clk *mck;
++ struct clk *sample_clk;
++ int irq;
++ int ret;
+
-+ dev_set_drvdata(&spi->dev, card);
++ if (the_dac)
++ return -EBUSY;
+
-+ goto out;
++ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (!regs)
++ return -ENXIO;
++ irq = platform_get_irq(pdev, 0);
++ if (irq < 0)
++ return irq;
+
-+out_ssc:
-+ ssc_free(chip->ssc);
-+out_card:
-+ snd_card_free(card);
-+out:
-+ return retval;
-+}
++ mck = clk_get(&pdev->dev, "pclk");
++ if (IS_ERR(mck))
++ return PTR_ERR(mck);
++ sample_clk = clk_get(&pdev->dev, "sample_clk");
++ if (IS_ERR(sample_clk)) {
++ ret = PTR_ERR(sample_clk);
++ goto out_put_mck;
++ }
++ clk_enable(mck);
+
-+static int __devexit snd_at73c213_remove(struct spi_device *spi)
-+{
-+ struct snd_card *card = dev_get_drvdata(&spi->dev);
-+ struct snd_at73c213 *chip = card->private_data;
-+ int retval;
++ ret = -ENOMEM;
++ dac = kzalloc(sizeof(struct at32_dac), GFP_KERNEL);
++ if (!dac)
++ goto out_disable_clk;
+
-+ /* Stop playback. */
-+ ssc_writel(chip->ssc->regs, CR, SSC_BIT(CR_TXDIS));
++ spin_lock_init(&dac->lock);
++ init_MUTEX(&dac->sem);
++ init_waitqueue_head(&dac->write_wait);
++ dac->pdev = pdev;
++ dac->mck = mck;
++ dac->sample_clk = sample_clk;
+
-+ /* Mute sound. */
-+ retval = snd_at73c213_write_reg(chip, DAC_LMPG, 0x3f);
-+ if (retval)
-+ goto out;
-+ retval = snd_at73c213_write_reg(chip, DAC_RMPG, 0x3f);
-+ if (retval)
-+ goto out;
-+ retval = snd_at73c213_write_reg(chip, DAC_LLOG, 0x3f);
-+ if (retval)
-+ goto out;
-+ retval = snd_at73c213_write_reg(chip, DAC_RLOG, 0x3f);
-+ if (retval)
-+ goto out;
-+ retval = snd_at73c213_write_reg(chip, DAC_LLIG, 0x11);
-+ if (retval)
-+ goto out;
-+ retval = snd_at73c213_write_reg(chip, DAC_RLIG, 0x11);
-+ if (retval)
-+ goto out;
-+ retval = snd_at73c213_write_reg(chip, DAC_AUXG, 0x11);
-+ if (retval)
-+ goto out;
++ dac->regs = ioremap(regs->start, regs->end - regs->start + 1);
++ if (!dac->regs)
++ goto out_free_dac;
+
-+ /* Turn off PA. */
-+ retval = snd_at73c213_write_reg(chip, PA_CTRL, (chip->reg_image[PA_CTRL]|0x0f));
-+ if (retval)
-+ goto out;
-+ msleep(10);
-+ retval = snd_at73c213_write_reg(chip, PA_CTRL, (1<<PA_CTRL_APALP)|0x0f);
-+ if (retval)
-+ goto out;
++ ret = request_irq(irq, abdac_interrupt, 0, "dac", dac);
++ if (ret)
++ goto out_unmap_regs;
+
-+ /* Turn off external DAC. */
-+ retval = snd_at73c213_write_reg(chip, DAC_CTRL, 0x0c);
-+ if (retval)
-+ goto out;
-+ msleep(2);
-+ retval = snd_at73c213_write_reg(chip, DAC_CTRL, 0x00);
-+ if (retval)
-+ goto out;
++ /* FIXME */
++ dac->req.req.dmac = find_dma_controller(0);
++ if (!dac->req.req.dmac)
++ goto out_free_irq;
+
-+ /* Turn off master power. */
-+ retval = snd_at73c213_write_reg(chip, DAC_PRECH, 0x00);
-+ if (retval)
-+ goto out;
++ ret = dma_alloc_channel(dac->req.req.dmac);
++ if (ret < 0)
++ goto out_free_irq;
+
-+out:
-+ /* Stop DAC master clock. */
-+ clk_disable(chip->board->dac_clk);
++ dac->req.req.channel = ret;
++ dac->req.req.block_complete = abdac_dma_block_complete;
++ dac->req.req.error = abdac_dma_error;
++ dac->req.data_reg = regs->start + DAC_DATA;
++ dac->req.periph_id = 2; /* FIXME */
++ dac->req.direction = DMA_DIR_MEM_TO_PERIPH;
++ dac->req.width = DMA_WIDTH_32BIT;
+
-+ ssc_free(chip->ssc);
-+ snd_card_free(card);
-+ dev_set_drvdata(&spi->dev, NULL);
++ /* Make sure the DAC is silent and disabled */
++ dac_writel(dac, DATA, 0);
++ dac_writel(dac, CTRL, 0);
+
-+ return 0;
-+}
++ ret = register_sound_dsp(&abdac_dsp_fops, -1);
++ if (ret < 0)
++ goto out_free_dma;
++ dac->dev_dsp = ret;
+
-+#ifdef CONFIG_PM
-+static int snd_at73c213_suspend(struct spi_device *spi, pm_message_t msg)
-+{
-+ struct snd_card *card = dev_get_drvdata(&spi->dev);
-+ struct snd_at73c213 *chip = card->private_data;
++ /* TODO: Register mixer */
+
-+ ssc_writel(chip->ssc->regs, CR, SSC_BIT(CR_TXDIS));
-+ clk_disable(chip->board->dac_clk);
++ the_dac = dac;
++ platform_set_drvdata(pdev, dac);
+
+ return 0;
++
++out_free_dma:
++ dma_release_channel(dac->req.req.dmac, dac->req.req.channel);
++out_free_irq:
++ free_irq(irq, dac);
++out_unmap_regs:
++ iounmap(dac->regs);
++out_free_dac:
++ kfree(dac);
++out_disable_clk:
++ clk_disable(mck);
++ clk_put(sample_clk);
++out_put_mck:
++ clk_put(mck);
++ return ret;
+}
+
-+static int snd_at73c213_resume(struct spi_device *spi)
++static int __exit abdac_remove(struct platform_device *pdev)
+{
-+ struct snd_card *card = dev_get_drvdata(&spi->dev);
-+ struct snd_at73c213 *chip = card->private_data;
++ struct at32_dac *dac;
+
-+ clk_enable(chip->board->dac_clk);
-+ ssc_writel(chip->ssc->regs, CR, SSC_BIT(CR_TXEN));
++ dac = platform_get_drvdata(pdev);
++ if (dac) {
++ unregister_sound_dsp(dac->dev_dsp);
++ dma_release_channel(dac->req.req.dmac, dac->req.req.channel);
++ free_irq(platform_get_irq(pdev, 0), dac);
++ iounmap(dac->regs);
++ clk_disable(dac->mck);
++ clk_put(dac->sample_clk);
++ clk_put(dac->mck);
++ kfree(dac);
++ platform_set_drvdata(pdev, NULL);
++ the_dac = NULL;
++ }
+
+ return 0;
+}
-+#else
-+#define snd_at73c213_suspend NULL
-+#define snd_at73c213_resume NULL
-+#endif
+
-+static struct spi_driver at73c213_driver = {
++static struct platform_driver abdac_driver = {
++ .remove = __exit_p(abdac_remove),
+ .driver = {
-+ .name = "at73c213",
++ .name = "abdac",
+ },
-+ .probe = snd_at73c213_probe,
-+ .suspend = snd_at73c213_suspend,
-+ .resume = snd_at73c213_resume,
-+ .remove = __devexit_p(snd_at73c213_remove),
+};
+
-+static int __init at73c213_init(void)
++static int __init abdac_init(void)
+{
-+ return spi_register_driver(&at73c213_driver);
++ return platform_driver_probe(&abdac_driver, abdac_probe);
+}
-+module_init(at73c213_init);
++module_init(abdac_init);
+
-+static void __exit at73c213_exit(void)
++static void __exit abdac_exit(void)
+{
-+ spi_unregister_driver(&at73c213_driver);
++ platform_driver_unregister(&abdac_driver);
+}
-+module_exit(at73c213_exit);
++module_exit(abdac_exit);
+
-+MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
-+MODULE_DESCRIPTION("Sound driver for AT73C213 with Atmel SSC");
++MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
++MODULE_DESCRIPTION("Sound Driver for the Atmel AT32 ABDAC");
+MODULE_LICENSE("GPL");
-diff --git a/sound/spi/at73c213.h b/sound/spi/at73c213.h
-new file mode 100644
-index 0000000..fd8b372
--- /dev/null
-+++ b/sound/spi/at73c213.h
-@@ -0,0 +1,119 @@
++++ b/sound/oss/at32_abdac.h
+@@ -0,0 +1,59 @@
+/*
-+ * Driver for the AT73C213 16-bit stereo DAC on Atmel ATSTK1000
-+ *
-+ * Copyright (C) 2006 - 2007 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful, but
-+ * WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ * General Public License for more details.
++ * Register definitions for the Atmel AT32 on-chip DAC.
+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-+ * 02111-1307, USA.
++ * Copyright (C) 2006 Atmel Corporation
+ *
-+ * The full GNU General Public License is included in this
-+ * distribution in the file called COPYING.
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
+ */
++#ifndef __SOUND_OSS_AT32_ABDAC_H__
++#define __SOUND_OSS_AT32_ABDAC_H__
++
++/* DAC register offsets */
++#define DAC_DATA 0x0000
++#define DAC_CTRL 0x0008
++#define DAC_INT_MASK 0x000c
++#define DAC_INT_EN 0x0010
++#define DAC_INT_DIS 0x0014
++#define DAC_INT_CLR 0x0018
++#define DAC_INT_STATUS 0x001c
++#define DAC_PDC_DATA 0x0020
++
++/* Bitfields in CTRL */
++#define DAC_SWAP_OFFSET 30
++#define DAC_SWAP_SIZE 1
++#define DAC_EN_OFFSET 31
++#define DAC_EN_SIZE 1
++
++/* Bitfields in INT_MASK/INT_EN/INT_DIS/INT_STATUS/INT_CLR */
++#define DAC_UNDERRUN_OFFSET 28
++#define DAC_UNDERRUN_SIZE 1
++#define DAC_TX_READY_OFFSET 29
++#define DAC_TX_READY_SIZE 1
++#define DAC_TX_BUFFER_EMPTY_OFFSET 30
++#define DAC_TX_BUFFER_EMPTY_SIZE 1
++#define DAC_CHANNEL_TX_END_OFFSET 31
++#define DAC_CHANNEL_TX_END_SIZE 1
++
++/* Bit manipulation macros */
++#define DAC_BIT(name) \
++ (1 << DAC_##name##_OFFSET)
++#define DAC_BF(name, value) \
++ (((value) & ((1 << DAC_##name##_SIZE) - 1)) \
++ << DAC_##name##_OFFSET)
++#define DAC_BFEXT(name, value) \
++ (((value) >> DAC_##name##_OFFSET) \
++ & ((1 << DAC_##name##_SIZE) - 1))
++#define DAC_BFINS(name, value, old) \
++ (((old) & ~(((1 << DAC_##name##_SIZE) - 1) \
++ << DAC_##name##_OFFSET)) \
++ | DAC_BF(name,value))
++
++/* Register access macros */
++#define dac_readl(port, reg) \
++ __raw_readl((port)->regs + DAC_##reg)
++#define dac_writel(port, reg, value) \
++ __raw_writel((value), (port)->regs + DAC_##reg)
+
-+#ifndef _SND_AT73C213_H
-+#define _SND_AT73C213_H
-+
-+/* DAC control register */
-+#define DAC_CTRL 0x00
-+#define DAC_CTRL_ONPADRV 7
-+#define DAC_CTRL_ONAUXIN 6
-+#define DAC_CTRL_ONDACR 5
-+#define DAC_CTRL_ONDACL 4
-+#define DAC_CTRL_ONLNOR 3
-+#define DAC_CTRL_ONLNOL 2
-+#define DAC_CTRL_ONLNIR 1
-+#define DAC_CTRL_ONLNIL 0
-+
-+/* DAC left line in gain register */
-+#define DAC_LLIG 0x01
-+#define DAC_LLIG_LLIG 0
-+
-+/* DAC right line in gain register */
-+#define DAC_RLIG 0x02
-+#define DAC_RLIG_RLIG 0
-+
-+/* DAC Left Master Playback Gain Register */
-+#define DAC_LMPG 0x03
-+#define DAC_LMPG_LMPG 0
-+
-+/* DAC Right Master Playback Gain Register */
-+#define DAC_RMPG 0x04
-+#define DAC_RMPG_RMPG 0
-+
-+/* DAC Left Line Out Gain Register */
-+#define DAC_LLOG 0x05
-+#define DAC_LLOG_LLOG 0
-+
-+/* DAC Right Line Out Gain Register */
-+#define DAC_RLOG 0x06
-+#define DAC_RLOG_RLOG 0
-+
-+/* DAC Output Level Control Register */
-+#define DAC_OLC 0x07
-+#define DAC_OLC_RSHORT 7
-+#define DAC_OLC_ROLC 4
-+#define DAC_OLC_LSHORT 3
-+#define DAC_OLC_LOLC 0
-+
-+/* DAC Mixer Control Register */
-+#define DAC_MC 0x08
-+#define DAC_MC_INVR 5
-+#define DAC_MC_INVL 4
-+#define DAC_MC_RMSMIN2 3
-+#define DAC_MC_RMSMIN1 2
-+#define DAC_MC_LMSMIN2 1
-+#define DAC_MC_LMSMIN1 0
-+
-+/* DAC Clock and Sampling Frequency Control Register */
-+#define DAC_CSFC 0x09
-+#define DAC_CSFC_OVRSEL 4
-+
-+/* DAC Miscellaneous Register */
-+#define DAC_MISC 0x0A
-+#define DAC_MISC_VCMCAPSEL 7
-+#define DAC_MISC_DINTSEL 4
-+#define DAC_MISC_DITHEN 3
-+#define DAC_MISC_DEEMPEN 2
-+#define DAC_MISC_NBITS 0
-+
-+/* DAC Precharge Control Register */
-+#define DAC_PRECH 0x0C
-+#define DAC_PRECH_PRCHGPDRV 7
-+#define DAC_PRECH_PRCHGAUX1 6
-+#define DAC_PRECH_PRCHGLNOR 5
-+#define DAC_PRECH_PRCHGLNOL 4
-+#define DAC_PRECH_PRCHGLNIR 3
-+#define DAC_PRECH_PRCHGLNIL 2
-+#define DAC_PRECH_PRCHG 1
-+#define DAC_PRECH_ONMSTR 0
-+
-+/* DAC Auxiliary Input Gain Control Register */
-+#define DAC_AUXG 0x0D
-+#define DAC_AUXG_AUXG 0
-+
-+/* DAC Reset Register */
-+#define DAC_RST 0x10
-+#define DAC_RST_RESMASK 2
-+#define DAC_RST_RESFILZ 1
-+#define DAC_RST_RSTZ 0
-+
-+/* Power Amplifier Control Register */
-+#define PA_CTRL 0x11
-+#define PA_CTRL_APAON 6
-+#define PA_CTRL_APAPRECH 5
-+#define PA_CTRL_APALP 4
-+#define PA_CTRL_APAGAIN 0
-+
-+#endif /* _SND_AT73C213_H */
++#endif /* __SOUND_OSS_AT32_ABDAC_H__ */
+--- a/sound/spi/at73c213.c
++++ b/sound/spi/at73c213.c
+@@ -737,7 +737,7 @@ cleanup:
+ /*
+ * Device functions
+ */
+-static int snd_at73c213_ssc_init(struct snd_at73c213 *chip)
++static int __devinit snd_at73c213_ssc_init(struct snd_at73c213 *chip)
+ {
+ /*
+ * Continuous clock output.
+@@ -767,7 +767,7 @@ static int snd_at73c213_ssc_init(struct
+ return 0;
+ }
+
+-static int snd_at73c213_chip_init(struct snd_at73c213 *chip)
++static int __devinit snd_at73c213_chip_init(struct snd_at73c213 *chip)
+ {
+ int retval;
+ unsigned char dac_ctrl = 0;
+@@ -933,7 +933,7 @@ out:
+ return retval;
+ }
+
+-static int snd_at73c213_probe(struct spi_device *spi)
++static int __devinit snd_at73c213_probe(struct spi_device *spi)
+ {
+ struct snd_card *card;
+ struct snd_at73c213 *chip;
projects / openwrt.git / blobdiff