+menu "Kernel Configuration / Device Support"
-config BR2_LINUX_2_4
- bool "Linux 2.4"
- default y
+comment "Device specific configuration"
-config BR2_LINUX_2_4_BRCM
- bool "Support for Broadcom based routers"
- default y
- depends BR2_mipsel
- help
- Build firmware images for Broadcom based routers
- (e.g. Linksys WRT54G(S), Asus WL-500g, Motorola WR850G)
-
- This one builds the generic .trx images, activate one of the
- options below for creating device specific files for use
- with TFTP client too.
-
- config BR2_TARGET_WRT54G
- default y
- depends BR2_LINUX_2_4_BRCM
- bool "Linksys WRT54G"
-
- config BR2_TARGET_WRT54GS
- default y
- depends BR2_LINUX_2_4_BRCM
- bool "Linksys WRT54GS"
-
- config BR2_TARGET_MOTOROLA
- default y
- depends BR2_LINUX_2_4_BRCM
- bool "Motorola WR850G"
+source "target/linux/*-2.[46]/Config.in"
-config BR2_LINUX_2_4_AR7
- bool "Support for TI AR7 based devices"
- default n
- depends BR2_mipsel
- help
- Build firmware images for TI AR7 based routers (w.g. Linksys WAG54G v2)
+comment "Kernel modules"
-config BR2_LINUX_2_4_SOEKRIS
- bool "Support for Soekris boards"
- default n
- depends BR2_i386
- help
- Build firmware images for Soekris based boards
- (e.g. net4521, net4801)
-
- config BR2_TARGET_NET4521
- default y
- depends BR2_LINUX_2_4_SOEKRIS
- bool "Soekris net4521"
+menu "Networking modules"
- config BR2_TARGET_NET4801
- default y
- depends BR2_LINUX_2_4_SOEKRIS
- bool "Soekris net4801"
-
-
-comment "Kernel Modules"
+config PACKAGE_KMOD_ATM
+ prompt "kmod-atm.......................... ATM support"
+ tristate
+ default y if LINUX_2_4_AR7
+ default m
+ help
+ ATM support
-config BR2_PACKAGE_KMOD_SANGAM_ATM
- tristate "AR7 Sangam ADSL Driver"
- default y
- depends BR2_LINUX_2_4_AR7
- select BR2_PACKAGE_KMOD_ATM
+config PACKAGE_KMOD_GRE
+ prompt "kmod-gre.......................... GRE tunneling driver"
+ tristate
+ default m
help
- ATM driver for the Sangam ADSL chip on AR7
+ Kernel support for GRE tunnels
+
+config PACKAGE_KMOD_IPIP
+ prompt "kmod-ipip......................... IP in IP encapsulation support"
+ tristate
+ default m
+ help
+ Kernel module for IP in IP encapsulation
-config BR2_PACKAGE_KMOD_CPMAC
- tristate "AR7 CPMAC Network Driver"
- default y
- depends BR2_LINUX_2_4_AR7
+config PACKAGE_KMOD_IPV6
+ prompt "kmod-ipv6......................... IPv6 support"
+ tristate
+ default m
help
- Driver for the AR7 CPMAC network chip
+ Kernel modules for IPv6 protocol support
-config BR2_PACKAGE_KMOD_DIAG
- tristate "Router LED/Button Driver"
- default y
+config PACKAGE_KMOD_RING
+ prompt "kmod-ring......................... PF Ring"
+ tristate
+ default m
help
- Driver for the LEDs on Wireless Routers (diag)
+ PF Ring
-config BR2_PACKAGE_KMOD_BRCM_WL
- tristate "Broadcom Wireless Network Driver"
- depends BR2_LINUX_2_4_BRCM
- default y
+config PACKAGE_KMOD_SCHED
+ prompt "kmod-sched........................ Traffic schedulers"
+ tristate
+ default m
help
- Proprietary driver for Broadcom Wireless chipsets
+ Kernel schedulers for IP traffic
-config BR2_PACKAGE_KMOD_BRCM_ET
- tristate "Broadcom Ethernet Driver"
- depends BR2_LINUX_2_4_BRCM
- default y
+config PACKAGE_KMOD_TUN
+ prompt "kmod-tun.......................... Universal TUN/TAP driver"
+ tristate
+ default m
help
- Proprietary driver for Broadcom Ethernet chipsets
+ Kernel support for the TUN/TAP tunneling device
+
+endmenu
-config BR2_PACKAGE_KMOD_B44
- tristate "Broadcom 44XX, 47XX ethernet driver"
+menu "Block devices support"
+
+config PACKAGE_kmod-ide-core
+ prompt "kmod-ide-core..................... IDE support"
+ tristate
default m
+ depends LINUX_2_4_X86 || LINUX_2_6_X86 || LINUX_2_4_BRCM || LINUX_2_6_BRCM
help
- Free driver for Broadcom Ethernet chipsets (without switch support)
+ Kernel modules for IDE support
+ useful for usb mass storage devices (e.g. on WL-HDD)
+
+ Includes:
+ - ide-core
+ - ide-detect
+ - ide-disk
-config BR2_PACKAGE_KMOD_ARPT
- tristate "ARP firewalling support"
+config PACKAGE_kmod-ide-pdc202xx
+ prompt "kmod-ide-pdc202xx................. PDC202xx driver"
+ tristate
default m
+ depends PACKAGE_kmod-ide-core
+ depends LINUX_2_4_X86 || LINUX_2_6_X86 || LINUX_2_4_BRCM || LINUX_2_6_BRCM
help
- Kernel modules for ARP firewalling
+ Kernel modules for IDE support
+ useful for usb mass storage devices (e.g. on WL-HDD)
+
+ Includes:
+ - ide-core
+ - ide-detect
+ - ide-disk
-config BR2_PACKAGE_KMOD_BLUETOOTH
- tristate "Bluetooth drivers and network stack"
+config PACKAGE_KMOD_LOOP
+ prompt "kmod-loop......................... Loop mount support"
+ tristate
default m
help
- Bluetooth drivers and network stack
+ Kernel module for loop mount support
-config BR2_PACKAGE_KMOD_EBT
- tristate "Ethernet Bridge firewalling support"
+config PACKAGE_KMOD_NBD
+ prompt "kmod-nbd.......................... Network Block Device"
+ tristate
default m
help
- Kernel modules for bridge firewalling
+ Kernel module for network block device
-config BR2_PACKAGE_KMOD_IPTABLES_V4
- tristate "Basic set of kernel modules for iptables"
- default y
+endmenu
+
+menu "Filesystems support"
+
+config PACKAGE_KMOD_FS_CIFS
+ prompt "kmod-fs-cifs...................... CIFS support"
+ tristate
+ default m
help
- Kernel modules for IPv4 firewalling
+ Kernel modules for CIFS support
-config BR2_PACKAGE_KMOD_IPTABLES_V4_EXTRA
- tristate "Extra modules for iptables"
+config PACKAGE_KMOD_FS_EXT2
+ prompt "kmod-fs-ext2...................... EXT2 filesystem support"
+ tristate
default m
help
- Extra kernel modules for IPv4 firewalling
+ Kernel modules for EXT2 filesystem support
-config BR2_PACKAGE_KMOD_IPV6
- tristate "IPv6 support"
+config PACKAGE_KMOD_FS_EXT3
+ prompt "kmod-fs-ext3...................... EXT3 filesystem support"
+ tristate
default m
help
- Kernel modules for IPv6 protocol support
-
-config BR2_PACKAGE_KMOD_IPTABLES_V6
- tristate "Kernel modules for ip6tables"
+ Kernel modules for EXT3 filesystem support
+
+config PACKAGE_KMOD_FS_HFSPLUS
+ prompt "kmod-fs-hfsplus................... HFS+ filesystem support"
+ tristate
default m
- depends BR2_PACKAGE_KMOD_IPV6
help
- IPv6 firewalling support
+ Kernel modules for HFS+ filesystem support
-config BR2_PACKAGE_KMOD_NFS
- tristate "NFS support"
+config PACKAGE_KMOD_FS_NFS
+ prompt "kmod-fs-nfs....................... NFS support"
+ tristate
default m
help
Kernel modules for NFS support
Includes lockd, nfs and sunrpc
-config BR2_PACKAGE_KMOD_CIFS
- tristate "CIFS support"
+config PACKAGE_KMOD_FS_VFAT
+ prompt "kmod-fs-vfat...................... VFAT filesystem support"
+ tristate
default m
help
- Kernel modules for CIFS support
+ Kernel modules for VFAT filesystem support
+ useful for usb mass storage devices
+
+config PACKAGE_KMOD_FS_XFS
+ prompt "kmod-fs-xfs....................... XFS filesystem support"
+ tristate
+ default m
+ help
+ Kernel modules for XFS filesystem support
-config BR2_PACKAGE_KMOD_USB
- tristate "USB support"
+endmenu
+
+menu "Multimedia devices support"
+
+config PACKAGE_KMOD_PWC
+ prompt "kmod-pwc.......................... Kernel driver for USB Philips Cameras"
+ tristate
+ depends PACKAGE_KMOD_USB
default m
-config BR2_PACKAGE_KMOD_USB_CONTROLLER
+config PACKAGE_KMOD_SOUNDCORE
+ prompt "kmod-soundcore.................... Soundcard support"
tristate
- depends on BR2_PACKAGE_KMOD_USB_UHCI || BR2_PACKAGE_KMOD_USB_OHCI
default n
+ help
+ Base support for soundcards
+ Requires either USB soundcard support (OSS) or ALSA package to be useful
-config BR2_PACKAGE_KMOD_USB_UHCI
- tristate "Support for UHCI controllers"
+config PACKAGE_KMOD_VIDEODEV
+ prompt "kmod-videodev..................... Video (For Linux) kernel support"
+ tristate
default m
- depends BR2_PACKAGE_KMOD_USB
- select BR2_PACKAGE_KMOD_USB_CONTROLLER
-config BR2_PACKAGE_KMOD_USB_OHCI
- tristate "Support for OHCI controllers"
- default m
- depends BR2_PACKAGE_KMOD_USB
- select BR2_PACKAGE_KMOD_USB_CONTROLLER
+endmenu
-config BR2_PACKAGE_KMOD_USB2
- tristate "Support for USB 2.0 controllers"
- default m
- depends BR2_PACKAGE_KMOD_USB_CONTROLLER
+menu "Native Language support"
-config BR2_PACKAGE_KMOD_USB_STORAGE
- tristate "Support for USB storage devices"
+config PACKAGE_KMOD_NLS_BASE
+ prompt "kmod-nls-base..................... Native Language support"
+ tristate
default m
- depends BR2_PACKAGE_KMOD_USB_CONTROLLER
+ help
+ Kernel native language support
-config BR2_PACKAGE_KMOD_USB_PRINTER
- tristate "Support for USB printers"
+config PACKAGE_KMOD_NLS_CP437
+ prompt "kmod-nls-cp437.................. Codepage 437 (United States, Canada)"
+ tristate
default m
- depends BR2_PACKAGE_KMOD_USB_CONTROLLER
+ depends PACKAGE_KMOD_NLS_BASE
+ help
+ Kernel native language support
-config BR2_PACKAGE_KMOD_USB_ACM
- tristate "Support for USB modems/isdn controllers"
+config PACKAGE_KMOD_NLS_CP850
+ prompt "kmod-nls-cp850.................. Codepage 850 (Europe)"
+ tristate
default m
- depends BR2_PACKAGE_KMOD_USB_CONTROLLER
+ depends PACKAGE_KMOD_NLS_BASE
+ help
+ Kernel native language support
-config BR2_PACKAGE_KMOD_IDE
- tristate "IDE support"
+config PACKAGE_KMOD_NLS_ISO8859_1
+ prompt "kmod-nls-iso8859-1.............. NLS ISO 8859-1 (Latin 1; Western European Languages)"
+ tristate
default m
+ depends PACKAGE_KMOD_NLS_BASE
help
- Kernel modules for IDE support
- useful for usb mass storage devices (e.g. on WL-HDD)
+ Kernel native language support
-config BR2_PACKAGE_KMOD_VFAT
- tristate "VFAT filesystem support"
+config PACKAGE_KMOD_NLS_ISO8859_15
+ prompt "kmod-nls-iso8859-15............. NLS ISO 8859-15 (Latin 15; Western European Languages with Euro)"
+ tristate
default m
+ depends PACKAGE_KMOD_NLS_BASE
help
- Kernel modules for VFAT filesystem support
- useful for usb mass storage devices
+ Kernel native language support
-config BR2_PACKAGE_KMOD_EXT2
- tristate "EXT2 filesystem support"
+config PACKAGE_KMOD_NLS_UTF8
+ prompt "kmod-nls-utf8................... NLS UTF8"
+ tristate
default m
+ depends PACKAGE_KMOD_NLS_BASE
help
- Kernel modules for EXT2 filesystem support
+ Kernel native language support
+
+endmenu
-config BR2_PACKAGE_KMOD_EXT3
- tristate "EXT3 filesystem support"
+menu "Network devices support"
+ depends LINUX_2_4_X86 || LINUX_2_6_X86
+
+
+config PACKAGE_KMOD_NET_AIRO
+ prompt "kmod-net-airo..................... Cisco/Aironet 34X/35X/4500/4800 ISA and PCI cards kernel support"
+ tristate
+ depends LINUX_2_4_X86 || LINUX_2_6_X86
default m
help
- Kernel modules for EXT3 filesystem support
+ This is the standard Linux driver to support Cisco/Aironet ISA and
+ PCI 802.11 wireless cards.
+ It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X
+ - with or without encryption) as well as card before the Cisco
+ acquisition (Aironet 4500, Aironet 4800, Aironet 4800B).
+
+ This driver support both the standard Linux Wireless Extensions
+ and Cisco proprietary API, so both the Linux Wireless Tools and the
+ Cisco Linux utilities can be used to configure the card.
+
-config BR2_PACKAGE_KMOD_XFS
- tristate "XFS filesystem support"
+config PACKAGE_KMOD_NET_HERMES
+ prompt "kmod-net-hermes................... Hermes chipset 802.11b support (Orinoco/Prism2/Symbol) kernel support"
+ tristate
+ depends LINUX_2_4_X86 || LINUX_2_6_X86
default m
help
- Kernel modules for XFS filesystem support
+ A driver for 802.11b wireless cards based based on the "Hermes" or
+ Intersil HFA384x (Prism 2) MAC controller. This includes the vast
+ majority of the PCMCIA 802.11b cards (which are nearly all rebadges)
+ - except for the Cisco/Aironet cards. Cards supported include the
+ Apple Airport (not a PCMCIA card), WavelanIEEE/Orinoco,
+ Cabletron/EnteraSys Roamabout, ELSA AirLancer, MELCO Buffalo, Avaya,
+ IBM High Rate Wireless, Farralon Syyline, Samsung MagicLAN, Netgear
+ MA401, LinkSys WPC-11, D-Link DWL-650, 3Com AirConnect, Intel
+ PRO/Wireless, and Symbol Spectrum24 High Rate amongst others.
-config BR2_PACKAGE_KMOD_HFSPLUS
- tristate "HFS+ filesystem support"
+config PACKAGE_KMOD_NET_HERMES_PCI
+ prompt "kmod-net-hermes-pci............. Intersil Prism 2.5 PCI 802.11b adaptor support"
+ tristate
default m
+ depends PACKAGE_KMOD_NET_HERMES
help
- Kernel modules for HFS+ filesystem support
+ Enable support for PCI and mini-PCI 802.11b wireless NICs based on
+ the Prism 2.5 chipset. These are true PCI cards, not the 802.11b
+ PCMCIA cards bundled with PCI<->PCMCIA adaptors which are also
+ common. Some of the built-in wireless adaptors in laptops are of
+ this variety.
-config BR2_PACKAGE_KMOD_LOOP
- tristate "loop mount support"
+config PACKAGE_KMOD_NET_HERMES_PLX
+ prompt "kmod-net-hermes-plx............. Hermes in PLX9052 based PCI adaptor (Netgear MA301, etc.) kernel support"
+ tristate
default m
+ depends PACKAGE_KMOD_NET_HERMES
help
- Kernel module for loop mount support
+ Enable support for PCMCIA cards supported by the "Hermes" (aka
+ orinoco_cs) driver when used in PLX9052 based PCI adaptors. These
+ adaptors are not a full PCMCIA controller but act as a more limited
+ PCI <-> PCMCIA bridge. Several vendors sell such adaptors so that
+ 802.11b PCMCIA cards can be used in desktop machines. The Netgear
+ MA301 is such an adaptor.
-config BR2_PACKAGE_KMOD_NBD
- tristate "network block device"
+
+
+config PACKAGE_KMOD_NET_PRISM54
+ prompt "kmod-net-prism54.................. Intersil Prism GT/Duette/Indigo PCI/PCMCIA cards kernel support"
+ tristate
+ depends LINUX_2_4_X86 || LINUX_2_6_X86 || LINUX_2_4_BRCM || LINUX_2_6_BRCM
default m
help
- Kernel module for network block device
+ Enable PCI and Cardbus support for the following chipset based cards:
+
+ * ISL3880 - Prism GT 802.11 b/g
+ * ISL3877 - Prism Indigo 802.11 a
+ * ISL3890 - Prism Duette 802.11 a/b/g
+
+ For a complete list of supported cards visit <http://prism54.org>.
+ Here is the latest confirmed list of supported cards:
+
+ * 3com OfficeConnect 11g Cardbus Card aka 3CRWE154G72
+ * Allnet ALL0271 PCI Card
+ * Compex WL54G Cardbus Card
+ * Corega CG-WLCB54GT Cardbus Card
+ * D-Link Air Plus Xtreme G A1 Cardbus Card aka DWL-g650
+ * I-O Data WN-G54/CB Cardbus Card
+ * Kobishi XG-300 aka Z-Com Cardbus Card
+ * Netgear WG511 Cardbus Card
+ * Ovislink WL-5400PCI PCI Card
+ * Peabird WLG-PCI PCI Card
+ * Sitecom WL-100i Cardbus Card
+ * Sitecom WL-110i PCI Card
+ * SMC2802W - EZ Connect g 2.4GHz 54 Mbps Wireless PCI Card
+ * SMC2835W - EZ Connect g 2.4GHz 54 Mbps Wireless Cardbus Card
+ * Z-Com XG-900 PCI Card
+ * Zyxel G-100 Cardbus Card
+
+ If you enable this, you require a firmware file as well.
+ You will need to copy this to /usr/lib/hotplug/firmware/isl3890.
+ You can get this non-GPL'd firmware file from the Prism54 project page:
+ <http://prism54.org>.
+
+ Note: You need a motherboard with DMA support to use any of these cards.
-config BR2_PACKAGE_KMOD_LP
- tristate "parallel port and lp support"
+endmenu
+
+menu "PCMCIA/CardBus support"
+ depends LINUX_2_4_X86 || LINUX_2_6_X86 || LINUX_2_4_BRCM || LINUX_2_6_BRCM
+
+config PACKAGE_KMOD_PCMCIA_CORE
+ prompt "kmod-pcmcia-core.................. PCMCIA/CardBus support"
+ depends PCMCIA_SUPPORT
+ tristate
+ depends LINUX_2_4_X86 || LINUX_2_6_X86 || LINUX_2_4_BRCM || LINUX_2_6_BRCM
default m
- help
- Kernel modules for line printer and parallel port support
-config BR2_PACKAGE_KMOD_CRYPTO
- tristate "CryptoAPI modules"
+config PACKAGE_KMOD_PCMCIA_SERIAL
+ prompt "kmod-pcmcia-serial.............. PCMCIA/CardBus serial device support"
+ tristate
default m
- select BUSYBOX_CONFIG_FEATURE_CHECK_TAINTED_MODULE
- help
- Kernel modules for cryptographic algorithms
+ depends PACKAGE_KMOD_PCMCIA_CORE
+
+endmenu
+
+menu "USB support"
-config BR2_PACKAGE_KMOD_PPP
- tristate "PPP support"
+config PACKAGE_KMOD_USB
+ prompt "kmod-usb-core..................... USB support"
+ tristate
+ default n if LINUX_2_4_AR531X
default m
- help
- Kernel support for PPP
-config BR2_PACKAGE_KMOD_MPPE
- tristate "PPP MPPE/MPPC module"
+config PACKAGE_KMOD_USB_UHCI
+ prompt "kmod-usb-uhci................... Support for UHCI controllers"
+ tristate
+ default n if LINUX_2_6_AU1000
+ depends PACKAGE_KMOD_USB
+ select PACKAGE_KMOD_USB_CONTROLLER
+
+config PACKAGE_KMOD_USB_OHCI
+ prompt "kmod-usb-ohci................... Support for OHCI controllers"
+ tristate
default m
- select BR2_PACKAGE_KMOD_CRYPTO
- depends BR2_PACKAGE_KMOD_PPP
- help
- Support for Microsoft PPP Encryption/Compression
+ depends PACKAGE_KMOD_USB
+ select PACKAGE_KMOD_USB_CONTROLLER
+
+config PACKAGE_KMOD_USB2
+ prompt "kmod-usb2....................... Support for USB 2.0 controllers"
+ tristate
+ default n if LINUX_2_6_AU1000
+ depends PACKAGE_KMOD_USB
+ select PACKAGE_KMOD_USB_CONTROLLER
+
+config PACKAGE_KMOD_USB_CONTROLLER
+ tristate
+ depends on PACKAGE_KMOD_USB_UHCI || PACKAGE_KMOD_USB_OHCI || PACKAGE_KMOD_USB2
+ default n
-config BR2_PACKAGE_KMOD_PPPOE
- tristate "PPPoE modules"
+config PACKAGE_KMOD_USB_ACM
+ prompt "kmod-usb-acm...................... Support for USB modems/isdn controllers"
+ tristate
default m
- depends BR2_PACKAGE_KMOD_PPP
- help
- Support for PPP over Ethernet
+ depends PACKAGE_KMOD_USB_CONTROLLER
-config BR2_PACKAGE_KMOD_PPPOATM
- tristate "PPP over ATM"
- default y if BR2_LINUX_2_4_AR7
+config PACKAGE_KMOD_USB_AUDIO
+ prompt "kmod-usb-audio.................... Support for USB soundcards"
+ tristate
default m
- depends BR2_PACKAGE_KMOD_PPP
- select BR2_PACKAGE_KMOD_ATM
- help
- Support for PPP over ATM
+ depends PACKAGE_KMOD_USB_CONTROLLER
+ select PACKAGE_KMOD_SOUNDCORE
-config BR2_PACKAGE_KMOD_ATM
- tristate "ATM support"
+config PACKAGE_KMOD_USB_PRINTER
+ prompt "kmod-usb-printer.................. Support for USB printers"
+ tristate
default m
- default y if BR2_LINUX_2_4_AR7
- help
- ATM support
+ depends PACKAGE_KMOD_USB_CONTROLLER
-config BR2_PACKAGE_KMOD_TUN
- tristate "Universal TUN/TAP driver"
+config PACKAGE_KMOD_USB_SERIAL
+ prompt "kmod-usb-serial................... Support for USB-to-serial converters"
+ tristate
default m
- help
- Kernel support for the TUN/TAP tunneling device
+ depends PACKAGE_KMOD_USB_CONTROLLER
+
+config PACKAGE_KMOD_USB_SERIAL_BELKIN
+ prompt "kmod-usb-serial-belkin.......... Support for Belkin USB-to-serial converters"
+ tristate
+ default m
+ depends PACKAGE_KMOD_USB_SERIAL
+
+config PACKAGE_KMOD_USB_SERIAL_FTDI
+ prompt "kmod-usb-serial-ftdi............ Support for FTDI USB-to-serial converterr"
+ tristate
+ default m
+ depends PACKAGE_KMOD_USB_SERIAL
+
+config PACKAGE_KMOD_USB_SERIAL_MCT_U232
+ prompt "kmod-usb-serial-mct-u232........ Support for Magic Control Technology USB-to-Serial converters"
+ tristate
+ default m
+ depends PACKAGE_KMOD_USB_SERIAL
+
+config PACKAGE_KMOD_USB_SERIAL_PL2303
+ prompt "kmod-usb-serial-pl2303.......... Support for Prolific PL2303 USB-to-Serial converters"
+ tristate
+ default m
+ depends PACKAGE_KMOD_USB_SERIAL
+
+config PACKAGE_KMOD_USB_SERIAL_VISOR
+ prompt "kmod-usb-serial-visor........... Support for Handspring Visor / Palm m50x / Sony Clie Driver"
+ tristate
+ default m
+ depends PACKAGE_KMOD_USB_SERIAL
+
+config PACKAGE_KMOD_USB_STORAGE
+ prompt "kmod-usb-storage.................. Support for USB storage devices"
+ tristate
+ default m
+ depends PACKAGE_KMOD_USB_CONTROLLER
-config BR2_PACKAGE_KMOD_GRE
- tristate "GRE tunneling driver"
+config PACKAGE_KMOD_USB_ATM
+ prompt "kmod-usb-atm...................... Support for USB ATM devices"
+ tristate
+ default m
+ depends PACKAGE_KMOD_USB_CONTROLLER
+
+config PACKAGE_KMOD_USB_ATM_SPEEDTOUCH
+ prompt "kmod-usb-atm-speedtouch......... Support for USB Speedtouch ADSL modem"
+ tristate
+ default m
+ depends PACKAGE_KMOD_USB_ATM
+
+endmenu
+
+menu "Misc. devices support"
+
+config PACKAGE_KMOD_AX25
+ prompt "kmod-ax25......................... AX25 support"
+ tristate
default m
help
- Kernel support for GRE tunnels
+ Kernel modules for AX25 protocol family
+
+ This package contains both the AX25 layer 2 support (ax25) and AX25 KISS driver (mkiss)
-config BR2_PACKAGE_KMOD_SCHED
- tristate "Traffic schedulers"
+config PACKAGE_KMOD_BLUETOOTH
+ prompt "kmod-bluetooth.................... Bluetooth drivers and network stack"
+ tristate
default m
+ default n if LINUX_2_4_AR531X
help
- Kernel schedulers for IP traffic
+ Bluetooth drivers and network stack
+config PACKAGE_KMOD_LP
+ prompt "kmod-lp........................... Parallel port and lp support"
+ tristate
+ default m
+ help
+ Kernel modules for line printer and parallel port support
-config BR2_PACKAGE_KMOD_NATSEMI
- tristate "Soekris net4801 ethernet driver"
- default y
- depends BR2_LINUX_2_4_SOEKRIS
+config PACKAGE_KMOD_SOFTDOG
+ prompt "kmod-softdog...................... Software watchdog"
+ tristate
+ default m
help
- Driver for the National Semiconductor DP8381x series PCI Ethernet
- found on Soekris net4801 boards
+ Kernel modules for software watchdog driver
-config BR2_PACKAGE_KMOD_WD1100
- tristate "Soekris net4801 watchdog"
+config PACKAGE_KMOD_WD1100
+ prompt "kmod-wd1100....................... Soekris net4801 watchdog"
+ tristate
default y
- depends BR2_LINUX_2_4_SOEKRIS
+ depends LINUX_2_4_X86
help
Driver for the NatSemi SC1x00 series Watchdog
found on Soekris net4801 boards
-source "target/linux/package/Config.in"
+endmenu
+
+endmenu
projects / openwrt.git / blobdiff