Add WL-700gE support (based on work by jr)

[openwrt.git] / package / broadcom-diag / src / diag.c

diff --git a/package/broadcom-diag/src/diag.c b/package/broadcom-diag/src/diag.c
index e17f255..4dcc0bf 100644 (file)
--- a/package/broadcom-diag/src/diag.c
+++ b/package/broadcom-diag/src/diag.c
@@ -54,6 +54,7 @@ enum {
        WRT54G,
        WRTSL54GS,
        WRT54G3G,
+       WRT350N,
        
        /* ASUS */
        WLHDD,
@@ -62,6 +63,7 @@ enum {
        WL500GD,
        WL500GP,
        ASUS_4702,
+       WL700GE,
        
        /* Buffalo */
        WBR2_G54,
@@ -69,6 +71,7 @@ enum {
        WHR_HP_G54,
        WHR2_A54G54,
        WLA2_G54L,
+       WZR_G300N,
        WZR_RS_G54,
        WZR_RS_G54HP,
        BUFFALO_UNKNOWN,
@@ -91,8 +94,28 @@ enum {
 
        /* Belkin */
        BELKIN_UNKNOWN,
+
+       /* Netgear */
+       WGT634U,
+
+       /* Trendware */
+       TEW411BRPP,
 };
 
+static void __init wl700ge_init(void) {
+               int pin = 1 << 3;
+
+               /* Enables GPIO 3 that controls HDD and led power on ASUS WL-700gE */
+               printk(MODULE_NAME ": Spinning up HDD and enabling leds\n");
+               gpio_outen(pin, pin);
+               gpio_control(pin, 0);
+               gpio_out(pin, pin);
+
+               /* Wait 5s, so the HDD can spin up */
+               set_current_state(TASK_INTERRUPTIBLE);
+               schedule_timeout(HZ * 5);
+}
+
 static struct platform_t __initdata platforms[] = {
        /* Linksys */
        [WAP54GV1] = {
@@ -168,6 +191,17 @@ static struct platform_t __initdata platforms[] = {
                        { .name = "3g_blink",   .gpio = 1 << 5, .polarity = NORMAL },
                },
        },
+       [WRT350N] = {
+               .name           = "Linksys WRT350N",
+               .buttons        = {
+                       { .name = "reset",      .gpio = 1 << 6 },
+                       { .name = "ses",        .gpio = 1 << 8 },
+               },
+               .leds           = {
+                       { .name = "power",      .gpio = 1 << 1, .polarity = NORMAL },
+                       { .name = "ses",        .gpio = 1 << 3, .polarity = REVERSE },
+               },
+       },
        /* Asus */
        [WLHDD] = {
                .name           = "ASUS WL-HDD",
@@ -176,6 +210,7 @@ static struct platform_t __initdata platforms[] = {
                },
                .leds           = {
                        { .name = "power",      .gpio = 1 << 0, .polarity = REVERSE },
+                       { .name = "usb",        .gpio = 1 << 2, .polarity = NORMAL },
                },
        },
        [WL300G] = {
@@ -224,6 +259,25 @@ static struct platform_t __initdata platforms[] = {
                        { .name = "power",      .gpio = 1 << 0, .polarity = REVERSE },
                },
        },
+       [WL700GE] = {
+               .name           = "ASUS WL-700gE",
+               .buttons        = {
+                       { .name = "reset",      .gpio = 1 << 7 }, // on back, hardwired, always resets device regardless OS state
+                       { .name = "ses",        .gpio = 1 << 4 }, // on back, actual name ezsetup
+                       { .name = "power",      .gpio = 1 << 0 }, // on front
+                       { .name = "copy",       .gpio = 1 << 6 }, // on front
+               },
+               .leds           = {
+#if 0
+                       // GPIO that controls power led also enables/disables some essential functions
+                       // - power to HDD
+                       // - switch leds
+                       { .name = "power",      .gpio = 1 << 3, .polarity = NORMAL },  // actual name power
+#endif
+                       { .name = "diag",       .gpio = 1 << 1, .polarity = REVERSE }, // actual name ready
+               },
+               .platform_init = wl700ge_init,
+       },
        /* Buffalo */
        [WHR_G54S] = {
                .name           = "Buffalo WHR-G54S",
@@ -281,6 +335,17 @@ static struct platform_t __initdata platforms[] = {
                        { .name = "diag",       .gpio = 1 << 1, .polarity = REVERSE },
                },
        },
+       [WZR_G300N] = {
+               .name           = "Buffalo WZR-G300N",
+               .buttons        = {
+                       { .name = "reset",      .gpio = 1 << 4 },
+               },
+               .leds           = {
+                       { .name = "diag",       .gpio = 1 << 7, .polarity = REVERSE },
+                       { .name = "bridge",     .gpio = 1 << 1, .polarity = REVERSE },
+                       { .name = "ses",        .gpio = 1 << 6, .polarity = REVERSE },
+               },
+       },
        [WZR_RS_G54] = {
                .name           = "Buffalo WZR-RS-G54",
                .buttons        = {
@@ -363,7 +428,8 @@ static struct platform_t __initdata platforms[] = {
                        { .name = "reset",      .gpio = 1 << 0 },
                },
                .leds           = {
-                       { .name = "diag",       .gpio = 1 << 7, .polarity = REVERSE },
+                       { .name = "wlan",       .gpio = 1 << 6, .polarity = REVERSE },
+                       { .name = "power",      .gpio = 1 << 7, .polarity = REVERSE },
                },
        },
        /* Motorola */
@@ -416,6 +482,28 @@ static struct platform_t __initdata platforms[] = {
                        { .name = "connected",  .gpio = 1 << 0, .polarity = NORMAL },
                },
        },
+       /* Netgear */
+       [WGT634U] = {
+               .name           = "Netgear WGT634U",
+               .buttons        = {
+                       { .name = "reset",      .gpio = 1 << 2 },
+               },
+               .leds           = {
+                       { .name = "power",      .gpio = 1 << 3, .polarity = REVERSE },
+               },
+       },
+       /* Trendware */
+       [TEW411BRPP] = {
+               .name           = "Trendware TEW411BRP+",
+               .buttons        = {
+                       { /* No usable buttons */ },
+               },
+               .leds           = {
+                       { .name = "power",      .gpio = 1 << 7, .polarity = NORMAL },
+                       { .name = "wlan",       .gpio = 1 << 1, .polarity = NORMAL },
+                       { .name = "bridge",     .gpio = 1 << 6, .polarity = NORMAL },
+               },
+       },
 };
 
 static struct platform_t __init *platform_detect(void)
@@ -424,9 +512,16 @@ static struct platform_t __init *platform_detect(void)
 
        boardnum = getvar("boardnum");
        boardtype = getvar("boardtype");
+
+       if (strncmp(getvar("model_no"), "WL700",5) == 0) {
+               return &platforms[WL700GE]; }
+
        if (strncmp(getvar("pmon_ver"), "CFE", 3) == 0) {
                /* CFE based - newer hardware */
                if (!strcmp(boardnum, "42")) { /* Linksys */
+                       if (!strcmp(boardtype, "0x478") && !strcmp(getvar("cardbus"), "1"))
+                               return &platforms[WRT350N];
+
                        if (!strcmp(boardtype, "0x0101") && !strcmp(getvar("boot_ver"), "v3.6"))
                                return &platforms[WRT54G3G];
 
@@ -447,6 +542,11 @@ static struct platform_t __init *platform_detect(void)
                if (!strcmp(boardnum, "10496"))
                        return &platforms[USR5461];
        } else { /* PMON based - old stuff */
+
+               /* Dell TrueMobile 2300 */
+               if (!strcmp(getvar("ModelId"),"WX-5565"))
+                       return &platforms[TM2300];
+       
                if ((simple_strtoul(getvar("GemtekPmonVer"), NULL, 0) == 9) &&
                        (simple_strtoul(getvar("et0phyaddr"), NULL, 0) == 30)) {
                        if (!strncmp(getvar("ModelId"),"WE800G", 6))
@@ -489,6 +589,8 @@ static struct platform_t __init *platform_detect(void)
                        return &platforms[WHR_G54S];
                if (!strcmp(buf, "290441dd"))
                        return &platforms[WHR2_A54G54];
+               if (!strcmp(buf, "31120"))
+                       return &platforms[WZR_G300N];
                if (!strcmp(buf, "30083"))
                        return &platforms[WZR_RS_G54];
                if (!strcmp(buf, "30103"))
@@ -502,13 +604,16 @@ static struct platform_t __init *platform_detect(void)
                        return &platforms[BUFFALO_UNKNOWN];
        }
 
-
        if (!strcmp(getvar("CFEver"), "MotoWRv203") ||
                !strcmp(getvar("MOTO_BOARD_TYPE"), "WR_FEM1")) {
 
                return &platforms[WR850GV2V3];
        }
 
+       if (!strcmp(boardnum, "44")) {  /* Trendware TEW-411BRP+ */
+               return &platforms[TEW411BRPP];
+       }
+
        /* not found */
        return NULL;
 }
@@ -556,6 +661,8 @@ static irqreturn_t button_handler(int irq, void *dev_id, struct pt_regs *regs)
        changed = platform.button_polarity ^ in;
        platform.button_polarity = in;
 
+       changed &= ~gpio_outen(0, 0);
+
        for (b = platform.buttons; b->name; b++) { 
                struct event_t *event;
 
@@ -804,6 +911,9 @@ static int __init diag_init(void)
        memcpy(&platform, detected, sizeof(struct platform_t));
 
        printk(MODULE_NAME ": Detected '%s'\n", platform.name);
+       if (platform.platform_init != NULL) {
+               platform.platform_init();
+       }
 
        if (!(diag = proc_mkdir("diag", NULL))) {
                printk(MODULE_NAME ": proc_mkdir on /proc/diag failed\n");