fix kmod-* build error when wildcards are being used in $(FILES)

[openwrt.git] / package / madwifi / Makefile

diff --git a/package/madwifi/Makefile b/package/madwifi/Makefile
index 7bdb7ec..530a828 100644 (file)
--- a/package/madwifi/Makefile
+++ b/package/madwifi/Makefile
@@ -1,18 +1,25 @@
+# 
+# Copyright (C) 2006 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
 # $Id$
 
 include $(TOPDIR)/rules.mk
-include $(TOPDIR)/include/kernel.mk
+include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=madwifi
-PKG_VERSION:=0.9.0
+PKG_VERSION:=0.9.2.1
 PKG_RELEASE:=1
-PKG_MD5SUM:=9b558d1df84cab2b0006c595feee0fba
 
-PKG_SOURCE_URL:=@SF/$(PKG_NAME)
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2
-PKG_CAT:=bzcat
+PKG_SOURCE_URL:=@SF/$(PKG_NAME)
+PKG_MD5SUM:=bf5509fccd3852e22551826063b1b61e
 
-PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+include $(INCLUDE_DIR)/package.mk
+
+RATE_CONTROL:=sample
 
 ifeq ($(ARCH),mips)
   HAL_TARGET:=mips-be-elf
@@ -26,13 +33,20 @@ endif
 ifeq ($(ARCH),armeb)
   HAL_TARGET:=xscale-be-elf
 endif
+ifeq ($(ARCH),arm)
+  HAL_TARGET:=xscale-le-elf
+endif
+ifeq ($(ARCH),powerpc)
+  HAL_TARGET:=powerpc-be-elf
+endif
 
-BUS := PCI
-ifneq ($(CONFIG_LINUX_2_4_AR531X),)
-  BUS := AHB
+BUS:=PCI
+ifneq ($(CONFIG_LINUX_2_6_ATHEROS),)
+  BUS:=AHB
+  HAL_TARGET:=ap51
 endif
 ifneq ($(CONFIG_LINUX_2_6_ARUBA),)
-  BUS := PCI AHB       # no suitable HAL for AHB yet.
+  BUS:=PCI AHB # no suitable HAL for AHB yet.
 endif
 
 BUS_MODULES:=
@@ -43,6 +57,41 @@ ifeq ($(findstring PCI,$(BUS)),PCI)
   BUS_MODULES+=$(PKG_BUILD_DIR)/ath/ath_pci.$(LINUX_KMOD_SUFFIX)
 endif
 
+MADWIFI_AUTOLOAD:= \
+       wlan \
+       wlan_scan_ap \
+       wlan_scan_sta \
+       ath_hal \
+       ath_rate_$(RATE_CONTROL) \
+       wlan_acl \
+       wlan_ccmp \
+       wlan_tkip \
+       wlan_wep \
+       wlan_xauth
+
+ifeq ($(findstring AHB,$(BUS)),AHB)
+       MADWIFI_AUTOLOAD += ath_ahb
+endif
+ifeq ($(findstring PCI,$(BUS)),PCI)
+       MADWIFI_AUTOLOAD += ath_pci
+endif
+
+define KernelPackage/madwifi
+  SUBMENU:=Wireless Drivers
+  TITLE:=Driver for Atheros wireless chipsets
+  DEPENDS:=+wireless-tools
+  DESCRIPTION:=\
+       This package contains a driver for Atheros 802.11a/b/g chipsets.
+  URL:=http://madwifi.org/
+  VERSION:=$(LINUX_VERSION)+$(PKG_VERSION)-$(BOARD)-$(PKG_RELEASE)
+  FILES:= \
+               $(PKG_BUILD_DIR)/ath/ath_hal.$(LINUX_KMOD_SUFFIX) \
+               $(BUS_MODULES) \
+               $(PKG_BUILD_DIR)/ath_rate/$(RATE_CONTROL)/ath_rate_$(RATE_CONTROL).$(LINUX_KMOD_SUFFIX) \
+               $(PKG_BUILD_DIR)/net80211/wlan*.$(LINUX_KMOD_SUFFIX)
+  AUTOLOAD:=$(call AutoLoad,50,$(MADWIFI_AUTOLOAD))
+endef
+
 MADWIFI_MAKEOPTS= -C $(PKG_BUILD_DIR) \
                PATH="$(TARGET_PATH)" \
                ARCH="$(LINUX_KARCH)" \
@@ -51,26 +100,32 @@ MADWIFI_MAKEOPTS= -C $(PKG_BUILD_DIR) \
                TOOLPREFIX="$(KERNEL_CROSS)" \
                TOOLPATH="$(KERNEL_CROSS)" \
                KERNELPATH="$(LINUX_DIR)" \
-               LDOPTS="" \
+               LDOPTS="--no-warn-mismatch " \
+               ATH_RATE="ath_rate/$(RATE_CONTROL)" \
                DOMULTI=1
 
-include $(TOPDIR)/include/package.mk
-
 ifeq ($(findstring AHB,$(BUS)),AHB)
-define Build/Compile/ahb
-       $(MAKE) $(MADWIFI_MAKEOPTS) BUS="AHB" all
-endef
+  define Build/Compile/ahb
+       $(MAKE) $(MADWIFI_MAKEOPTS) BUS="AHB" modules
+  endef
 endif
 
 ifeq ($(findstring PCI,$(BUS)),PCI)
-define Build/Compile/pci
-       $(MAKE) $(MADWIFI_MAKEOPTS) BUS="PCI" all
-endef
+  define Build/Compile/pci
+       $(MAKE) $(MADWIFI_MAKEOPTS) BUS="PCI" modules
+  endef
 endif
 
+define Build/Configure
+       $(SED) 's,-E[LB] ,,g' $(PKG_BUILD_DIR)/hal/public/*.inc
+endef
+
 define Build/Compile
-$(call Build/Compile/ahb)
-$(call Build/Compile/pci)
+       $(call Build/Compile/ahb)
+       $(call Build/Compile/pci)
+       $(MAKE) $(MADWIFI_MAKEOPTS) \
+               CFLAGS="$(TARGET_CFLAGS)" \
+               tools
 endef
 
 define Build/InstallDev
@@ -81,39 +136,14 @@ define Build/InstallDev
 endef
 
 define Build/UninstallDev
-       rm -rf $(STAGING_DIR)/usr/include/madwifi
+       rm -rf  $(STAGING_DIR)/usr/include/madwifi
 endef
 
-define Package/kmod-madwifi
- SECTION:=drivers
- CATEGORY:=Drivers
- DEFAULT:=y if LINUX_2_6_BRCM || LINUX_2_6_ARUBA || LINUX_2_4_AR531X || LINUX_2_6_XSCALE, m if ALL
- TITLE:=Driver for Atheros wireless chipsets
- DESCRIPTION:=Driver for Atheros 802.11a/b/g chipsets
- URL:=http://madwifi.org/
- VERSION:=$(LINUX_VERSION)+$(PKG_VERSION)-$(BOARD)-$(PKG_RELEASE)
-endef
-
-define Package/kmod-madwifi/install
-       mkdir -p $(1)/etc/modules.d
-       mkdir -p $(1)/etc/init.d
-       mkdir -p $(1)/lib/modules/$(LINUX_VERSION)
-       mkdir -p $(1)/usr/sbin
-       install -m0644 ./files/madwifi.modules $(1)/etc/modules.d/20-madwifi
-ifeq ($(findstring AHB,$(BUS)),AHB)
-       echo ath_ahb >> $(1)/etc/modules.d/20-madwifi
-endif
-ifeq ($(findstring PCI,$(BUS)),PCI)
-       echo ath_pci >> $(1)/etc/modules.d/20-madwifi
-endif
-       install -m0755 ./files/madwifi.init $(1)/etc/init.d/S20madwifi
-       $(CP) \
-               $(PKG_BUILD_DIR)/ath_hal/ath_hal.$(LINUX_KMOD_SUFFIX) \
-               $(BUS_MODULES) \
-               $(PKG_BUILD_DIR)/ath_rate/sample/ath_rate_sample.$(LINUX_KMOD_SUFFIX) \
-               $(PKG_BUILD_DIR)/net80211/*.$(LINUX_KMOD_SUFFIX) \
-               $(1)/lib/modules/$(LINUX_VERSION)/
-       $(CP) $(PKG_BUILD_DIR)/tools/{madwifi_multi,80211debug,80211stats,athchans,athctrl,athdebug,athkey,athstats,wlanconfig} $(1)/usr/sbin/
+define KernelPackage/madwifi/install
+       $(INSTALL_DIR) $(1)/lib/wifi
+       $(INSTALL_DATA) ./files/lib/wifi/madwifi.sh $(1)/lib/wifi
+       $(INSTALL_DIR) $(1)/usr/sbin
+       $(CP) $(PKG_BUILD_DIR)/tools/{madwifi_multi,80211stats,athchans,athctrl,athkey,athstats,wlanconfig} $(1)/usr/sbin/
 endef
 
-$(eval $(call BuildPackage,kmod-madwifi))
+$(eval $(call KernelPackage,madwifi))